git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/libertas/if_usb.c

   1 /**
   2   * This file contains functions used in USB interface module.
   3   */
   4 #include <linux/delay.h>
   5 #include <linux/moduleparam.h>
   6 #include <linux/firmware.h>
   7 #include <linux/netdevice.h>
   8 #include <linux/usb.h>
   9
  10 #ifdef CONFIG_OLPC
  11 #include <asm/olpc.h>
  12 #endif
  13
  14 #define DRV_NAME "usb8xxx"
  15
  16 #include "host.h"
  17 #include "decl.h"
  18 #include "defs.h"
  19 #include "dev.h"
  20 #include "cmd.h"
  21 #include "if_usb.h"
  22
  23 #define INSANEDEBUG     0
  24 #define lbs_deb_usb2(...) do { if (INSANEDEBUG) lbs_deb_usbd(__VA_ARGS__); } while (0)
  25
  26 #define MESSAGE_HEADER_LEN      4
  27
  28 static char *lbs_fw_name = "usb8388.bin";
  29 module_param_named(fw_name, lbs_fw_name, charp, 0644);
  30
  31 static struct usb_device_id if_usb_table[] = {
  32         /* Enter the device signature inside */
  33         { USB_DEVICE(0x1286, 0x2001) },
  34         { USB_DEVICE(0x05a3, 0x8388) },
  35         {}      /* Terminating entry */
  36 };
  37
  38 MODULE_DEVICE_TABLE(usb, if_usb_table);
  39
  40 static void if_usb_receive(struct urb *urb);
  41 static void if_usb_receive_fwload(struct urb *urb);
  42 static int __if_usb_prog_firmware(struct if_usb_card *cardp,
  43                                         const char *fwname, int cmd);
  44 static int if_usb_prog_firmware(struct if_usb_card *cardp,
  45                                         const char *fwname, int cmd);
  46 static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
  47                                uint8_t *payload, uint16_t nb);
  48 static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
  49                         uint16_t nb);
  50 static void if_usb_free(struct if_usb_card *cardp);
  51 static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
  52 static int if_usb_reset_device(struct if_usb_card *cardp);
  53
  54 /* sysfs hooks */
  55
  56 /**
  57  *  Set function to write firmware to device's persistent memory
  58  */
  59 static ssize_t if_usb_firmware_set(struct device *dev,
  60                 struct device_attribute *attr, const char *buf, size_t count)
  61 {
  62         struct lbs_private *priv = to_net_dev(dev)->ml_priv;
  63         struct if_usb_card *cardp = priv->card;
  64         char fwname[FIRMWARE_NAME_MAX];
  65         int ret;
  66
  67         sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
  68         ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_FW);
  69         if (ret == 0)
  70                 return count;
  71
  72         return ret;
  73 }
  74
  75 /**
  76  * lbs_flash_fw attribute to be exported per ethX interface through sysfs
  77  * (/sys/class/net/ethX/lbs_flash_fw).  Use this like so to write firmware to
  78  * the device's persistent memory:
  79  * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
  80  */
  81 static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
  82
  83 /**
  84  *  Set function to write firmware to device's persistent memory
  85  */
  86 static ssize_t if_usb_boot2_set(struct device *dev,
  87                 struct device_attribute *attr, const char *buf, size_t count)
  88 {
  89         struct lbs_private *priv = to_net_dev(dev)->ml_priv;
  90         struct if_usb_card *cardp = priv->card;
  91         char fwname[FIRMWARE_NAME_MAX];
  92         int ret;
  93
  94         sscanf(buf, "%29s", fwname); /* FIRMWARE_NAME_MAX - 1 = 29 */
  95         ret = if_usb_prog_firmware(cardp, fwname, BOOT_CMD_UPDATE_BOOT2);
  96         if (ret == 0)
  97                 return count;
  98
  99         return ret;
 100 }
 101
 102 /**
 103  * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
 104  * (/sys/class/net/ethX/lbs_flash_boot2).  Use this like so to write firmware
 105  * to the device's persistent memory:
 106  * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
 107  */
 108 static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
 109
 110 /**
 111  *  @brief  call back function to handle the status of the URB
 112  *  @param urb          pointer to urb structure
 113  *  @return             N/A
 114  */
 115 static void if_usb_write_bulk_callback(struct urb *urb)
 116 {
 117         struct if_usb_card *cardp = (struct if_usb_card *) urb->context;
 118
 119         /* handle the transmission complete validations */
 120
 121         if (urb->status == 0) {
 122                 struct lbs_private *priv = cardp->priv;
 123
 124                 lbs_deb_usb2(&urb->dev->dev, "URB status is successful\n");
 125                 lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n",
 126                              urb->actual_length);
 127
 128                 /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
 129                  * passed up to the lbs level.
 130                  */
 131                 if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT)
 132                         lbs_host_to_card_done(priv);
 133         } else {
 134                 /* print the failure status number for debug */
 135                 lbs_pr_info("URB in failure status: %d\n", urb->status);
 136         }
 137
 138         return;
 139 }
 140
 141 /**
 142  *  @brief  free tx/rx urb, skb and rx buffer
 143  *  @param cardp        pointer if_usb_card
 144  *  @return             N/A
 145  */
 146 static void if_usb_free(struct if_usb_card *cardp)
 147 {
 148         lbs_deb_enter(LBS_DEB_USB);
 149
 150         /* Unlink tx & rx urb */
 151         usb_kill_urb(cardp->tx_urb);
 152         usb_kill_urb(cardp->rx_urb);
 153
 154         usb_free_urb(cardp->tx_urb);
 155         cardp->tx_urb = NULL;
 156
 157         usb_free_urb(cardp->rx_urb);
 158         cardp->rx_urb = NULL;
 159
 160         kfree(cardp->ep_out_buf);
 161         cardp->ep_out_buf = NULL;
 162
 163         lbs_deb_leave(LBS_DEB_USB);
 164 }
 165
 166 static void if_usb_setup_firmware(struct lbs_private *priv)
 167 {
 168         struct if_usb_card *cardp = priv->card;
 169         struct cmd_ds_set_boot2_ver b2_cmd;
 170         struct cmd_ds_802_11_fw_wake_method wake_method;
 171
 172         b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd));
 173         b2_cmd.action = 0;
 174         b2_cmd.version = cardp->boot2_version;
 175
 176         if (lbs_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd))
 177                 lbs_deb_usb("Setting boot2 version failed\n");
 178
 179         priv->wol_gpio = 2; /* Wake via GPIO2... */
 180         priv->wol_gap = 20; /* ... after 20ms    */
 181         lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA,
 182                         (struct wol_config *) NULL);
 183
 184         wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
 185         wake_method.action = cpu_to_le16(CMD_ACT_GET);
 186         if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
 187                 lbs_pr_info("Firmware does not seem to support PS mode\n");
 188         } else {
 189                 if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
 190                         lbs_deb_usb("Firmware seems to support PS with wake-via-command\n");
 191                         priv->ps_supported = 1;
 192                 } else {
 193                         /* The versions which boot up this way don't seem to
 194                            work even if we set it to the command interrupt */
 195                         lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
 196                 }
 197         }
 198 }
 199
 200 static void if_usb_fw_timeo(unsigned long priv)
 201 {
 202         struct if_usb_card *cardp = (void *)priv;
 203
 204         if (cardp->fwdnldover) {
 205                 lbs_deb_usb("Download complete, no event. Assuming success\n");
 206         } else {
 207                 lbs_pr_err("Download timed out\n");
 208                 cardp->surprise_removed = 1;
 209         }
 210         wake_up(&cardp->fw_wq);
 211 }
 212
 213 #ifdef CONFIG_OLPC
 214 static void if_usb_reset_olpc_card(struct lbs_private *priv)
 215 {
 216         printk(KERN_CRIT "Resetting OLPC wireless via EC...\n");
 217         olpc_ec_cmd(0x25, NULL, 0, NULL, 0);
 218 }
 219 #endif
 220
 221 /**
 222  *  @brief sets the configuration values
 223  *  @param ifnum        interface number
 224  *  @param id           pointer to usb_device_id
 225  *  @return             0 on success, error code on failure
 226  */
 227 static int if_usb_probe(struct usb_interface *intf,
 228                         const struct usb_device_id *id)
 229 {
 230         struct usb_device *udev;
 231         struct usb_host_interface *iface_desc;
 232         struct usb_endpoint_descriptor *endpoint;
 233         struct lbs_private *priv;
 234         struct if_usb_card *cardp;
 235         int i;
 236
 237         udev = interface_to_usbdev(intf);
 238
 239         cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
 240         if (!cardp) {
 241                 lbs_pr_err("Out of memory allocating private data.\n");
 242                 goto error;
 243         }
 244
 245         setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp);
 246         init_waitqueue_head(&cardp->fw_wq);
 247
 248         cardp->udev = udev;
 249         iface_desc = intf->cur_altsetting;
 250
 251         lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X"
 252                      " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n",
 253                      le16_to_cpu(udev->descriptor.bcdUSB),
 254                      udev->descriptor.bDeviceClass,
 255                      udev->descriptor.bDeviceSubClass,
 256                      udev->descriptor.bDeviceProtocol);
 257
 258         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 259                 endpoint = &iface_desc->endpoint[i].desc;
 260                 if (usb_endpoint_is_bulk_in(endpoint)) {
 261                         cardp->ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
 262                         cardp->ep_in = usb_endpoint_num(endpoint);
 263
 264                         lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in);
 265                         lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size);
 266
 267                 } else if (usb_endpoint_is_bulk_out(endpoint)) {
 268                         cardp->ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
 269                         cardp->ep_out = usb_endpoint_num(endpoint);
 270
 271                         lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out);
 272                         lbs_deb_usbd(&udev->dev, "Bulk out size is %d\n", cardp->ep_out_size);
 273                 }
 274         }
 275         if (!cardp->ep_out_size || !cardp->ep_in_size) {
 276                 lbs_deb_usbd(&udev->dev, "Endpoints not found\n");
 277                 goto dealloc;
 278         }
 279         if (!(cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
 280                 lbs_deb_usbd(&udev->dev, "Rx URB allocation failed\n");
 281                 goto dealloc;
 282         }
 283         if (!(cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
 284                 lbs_deb_usbd(&udev->dev, "Tx URB allocation failed\n");
 285                 goto dealloc;
 286         }
 287         cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, GFP_KERNEL);
 288         if (!cardp->ep_out_buf) {
 289                 lbs_deb_usbd(&udev->dev, "Could not allocate buffer\n");
 290                 goto dealloc;
 291         }
 292
 293         /* Upload firmware */
 294         if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
 295                 lbs_deb_usbd(&udev->dev, "FW upload failed\n");
 296                 goto err_prog_firmware;
 297         }
 298
 299         if (!(priv = lbs_add_card(cardp, &udev->dev)))
 300                 goto err_prog_firmware;
 301
 302         cardp->priv = priv;
 303         cardp->priv->fw_ready = 1;
 304
 305         priv->hw_host_to_card = if_usb_host_to_card;
 306 #ifdef CONFIG_OLPC
 307         if (machine_is_olpc())
 308                 priv->reset_card = if_usb_reset_olpc_card;
 309 #endif
 310
 311         cardp->boot2_version = udev->descriptor.bcdDevice;
 312
 313         if_usb_submit_rx_urb(cardp);
 314
 315         if (lbs_start_card(priv))
 316                 goto err_start_card;
 317
 318         if_usb_setup_firmware(priv);
 319
 320         usb_get_dev(udev);
 321         usb_set_intfdata(intf, cardp);
 322
 323         if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
 324                 lbs_pr_err("cannot register lbs_flash_fw attribute\n");
 325
 326         if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
 327                 lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
 328
 329         return 0;
 330
 331 err_start_card:
 332         lbs_remove_card(priv);
 333 err_prog_firmware:
 334         if_usb_reset_device(cardp);
 335 dealloc:
 336         if_usb_free(cardp);
 337
 338 error:
 339         return -ENOMEM;
 340 }
 341
 342 /**
 343  *  @brief free resource and cleanup
 344  *  @param intf         USB interface structure
 345  *  @return             N/A
 346  */
 347 static void if_usb_disconnect(struct usb_interface *intf)
 348 {
 349         struct if_usb_card *cardp = usb_get_intfdata(intf);
 350         struct lbs_private *priv = (struct lbs_private *) cardp->priv;
 351
 352         lbs_deb_enter(LBS_DEB_MAIN);
 353
 354         device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2);
 355         device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw);
 356
 357         cardp->surprise_removed = 1;
 358
 359         if (priv) {
 360                 priv->surpriseremoved = 1;
 361                 lbs_stop_card(priv);
 362                 lbs_remove_card(priv);
 363         }
 364
 365         /* Unlink and free urb */
 366         if_usb_free(cardp);
 367
 368         usb_set_intfdata(intf, NULL);
 369         usb_put_dev(interface_to_usbdev(intf));
 370
 371         lbs_deb_leave(LBS_DEB_MAIN);
 372 }
 373
 374 /**
 375  *  @brief  This function download FW
 376  *  @param priv         pointer to struct lbs_private
 377  *  @return             0
 378  */
 379 static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
 380 {
 381         struct fwdata *fwdata = cardp->ep_out_buf;
 382         const uint8_t *firmware = cardp->fw->data;
 383
 384         /* If we got a CRC failure on the last block, back
 385            up and retry it */
 386         if (!cardp->CRC_OK) {
 387                 cardp->totalbytes = cardp->fwlastblksent;
 388                 cardp->fwseqnum--;
 389         }
 390
 391         lbs_deb_usb2(&cardp->udev->dev, "totalbytes = %d\n",
 392                      cardp->totalbytes);
 393
 394         /* struct fwdata (which we sent to the card) has an
 395            extra __le32 field in between the header and the data,
 396            which is not in the struct fwheader in the actual
 397            firmware binary. Insert the seqnum in the middle... */
 398         memcpy(&fwdata->hdr, &firmware[cardp->totalbytes],
 399                sizeof(struct fwheader));
 400
 401         cardp->fwlastblksent = cardp->totalbytes;
 402         cardp->totalbytes += sizeof(struct fwheader);
 403
 404         memcpy(fwdata->data, &firmware[cardp->totalbytes],
 405                le32_to_cpu(fwdata->hdr.datalength));
 406
 407         lbs_deb_usb2(&cardp->udev->dev, "Data length = %d\n",
 408                      le32_to_cpu(fwdata->hdr.datalength));
 409
 410         fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum);
 411         cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength);
 412
 413         usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) +
 414                      le32_to_cpu(fwdata->hdr.datalength));
 415
 416         if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) {
 417                 lbs_deb_usb2(&cardp->udev->dev, "There are data to follow\n");
 418                 lbs_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n",
 419                              cardp->fwseqnum, cardp->totalbytes);
 420         } else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) {
 421                 lbs_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n");
 422                 lbs_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n");
 423
 424                 cardp->fwfinalblk = 1;
 425         }
 426
 427         lbs_deb_usb2(&cardp->udev->dev, "Firmware download done; size %d\n",
 428                      cardp->totalbytes);
 429
 430         return 0;
 431 }
 432
 433 static int if_usb_reset_device(struct if_usb_card *cardp)
 434 {
 435         struct cmd_ds_command *cmd = cardp->ep_out_buf + 4;
 436         int ret;
 437
 438         lbs_deb_enter(LBS_DEB_USB);
 439
 440         *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
 441
 442         cmd->command = cpu_to_le16(CMD_802_11_RESET);
 443         cmd->size = cpu_to_le16(sizeof(struct cmd_header));
 444         cmd->result = cpu_to_le16(0);
 445         cmd->seqnum = cpu_to_le16(0x5a5a);
 446         usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header));
 447
 448         msleep(100);
 449         ret = usb_reset_device(cardp->udev);
 450         msleep(100);
 451
 452 #ifdef CONFIG_OLPC
 453         if (ret && machine_is_olpc())
 454                 if_usb_reset_olpc_card(NULL);
 455 #endif
 456
 457         lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
 458
 459         return ret;
 460 }
 461
 462 /**
 463  *  @brief This function transfer the data to the device.
 464  *  @param priv         pointer to struct lbs_private
 465  *  @param payload      pointer to payload data
 466  *  @param nb           data length
 467  *  @return             0 or -1
 468  */
 469 static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
 470 {
 471         int ret = -1;
 472
 473         /* check if device is removed */
 474         if (cardp->surprise_removed) {
 475                 lbs_deb_usbd(&cardp->udev->dev, "Device removed\n");
 476                 goto tx_ret;
 477         }
 478
 479         usb_fill_bulk_urb(cardp->tx_urb, cardp->udev,
 480                           usb_sndbulkpipe(cardp->udev,
 481                                           cardp->ep_out),
 482                           payload, nb, if_usb_write_bulk_callback, cardp);
 483
 484         cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET;
 485
 486         if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) {
 487                 lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret);
 488                 ret = -1;
 489         } else {
 490                 lbs_deb_usb2(&cardp->udev->dev, "usb_submit_urb success\n");
 491                 ret = 0;
 492         }
 493
 494 tx_ret:
 495         return ret;
 496 }
 497
 498 static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
 499                                   void (*callbackfn)(struct urb *urb))
 500 {
 501         struct sk_buff *skb;
 502         int ret = -1;
 503
 504         if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
 505                 lbs_pr_err("No free skb\n");
 506                 goto rx_ret;
 507         }
 508
 509         cardp->rx_skb = skb;
 510
 511         /* Fill the receive configuration URB and initialise the Rx call back */
 512         usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
 513                           usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
 514                           (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
 515                           MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
 516                           cardp);
 517
 518         cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
 519
 520         lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
 521         if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
 522                 lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
 523                 kfree_skb(skb);
 524                 cardp->rx_skb = NULL;
 525                 ret = -1;
 526         } else {
 527                 lbs_deb_usb2(&cardp->udev->dev, "Submit Rx URB success\n");
 528                 ret = 0;
 529         }
 530
 531 rx_ret:
 532         return ret;
 533 }
 534
 535 static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp)
 536 {
 537         return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
 538 }
 539
 540 static int if_usb_submit_rx_urb(struct if_usb_card *cardp)
 541 {
 542         return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
 543 }
 544
 545 static void if_usb_receive_fwload(struct urb *urb)
 546 {
 547         struct if_usb_card *cardp = urb->context;
 548         struct sk_buff *skb = cardp->rx_skb;
 549         struct fwsyncheader *syncfwheader;
 550         struct bootcmdresp bootcmdresp;
 551
 552         if (urb->status) {
 553                 lbs_deb_usbd(&cardp->udev->dev,
 554                              "URB status is failed during fw load\n");
 555                 kfree_skb(skb);
 556                 return;
 557         }
 558
 559         if (cardp->fwdnldover) {
 560                 __le32 *tmp = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
 561
 562                 if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
 563                     tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
 564                         lbs_pr_info("Firmware ready event received\n");
 565                         wake_up(&cardp->fw_wq);
 566                 } else {
 567                         lbs_deb_usb("Waiting for confirmation; got %x %x\n",
 568                                     le32_to_cpu(tmp[0]), le32_to_cpu(tmp[1]));
 569                         if_usb_submit_rx_urb_fwload(cardp);
 570                 }
 571                 kfree_skb(skb);
 572                 return;
 573         }
 574         if (cardp->bootcmdresp <= 0) {
 575                 memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET,
 576                         sizeof(bootcmdresp));
 577
 578                 if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
 579                         kfree_skb(skb);
 580                         if_usb_submit_rx_urb_fwload(cardp);
 581                         cardp->bootcmdresp = BOOT_CMD_RESP_OK;
 582                         lbs_deb_usbd(&cardp->udev->dev,
 583                                      "Received valid boot command response\n");
 584                         return;
 585                 }
 586                 if (bootcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
 587                         if (bootcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) ||
 588                             bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
 589                             bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
 590                                 if (!cardp->bootcmdresp)
 591                                         lbs_pr_info("Firmware already seems alive; resetting\n");
 592                                 cardp->bootcmdresp = -1;
 593                         } else {
 594                                 lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
 595                                             le32_to_cpu(bootcmdresp.magic));
 596                         }
 597                 } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
 598                            (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
 599                            (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
 600                         lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
 601                                     bootcmdresp.cmd);
 602                 } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
 603                         lbs_pr_info("boot cmd response result error (%d)\n",
 604                                     bootcmdresp.result);
 605                 } else {
 606                         cardp->bootcmdresp = 1;
 607                         lbs_deb_usbd(&cardp->udev->dev,
 608                                      "Received valid boot command response\n");
 609                 }
 610                 kfree_skb(skb);
 611                 if_usb_submit_rx_urb_fwload(cardp);
 612                 return;
 613         }
 614
 615         syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC);
 616         if (!syncfwheader) {
 617                 lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n");
 618                 kfree_skb(skb);
 619                 return;
 620         }
 621
 622         memcpy(syncfwheader, skb->data + IPFIELD_ALIGN_OFFSET,
 623                sizeof(struct fwsyncheader));
 624
 625         if (!syncfwheader->cmd) {
 626                 lbs_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n");
 627                 lbs_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n",
 628                              le32_to_cpu(syncfwheader->seqnum));
 629                 cardp->CRC_OK = 1;
 630         } else {
 631                 lbs_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n");
 632                 cardp->CRC_OK = 0;
 633         }
 634
 635         kfree_skb(skb);
 636
 637         /* Give device 5s to either write firmware to its RAM or eeprom */
 638         mod_timer(&cardp->fw_timeout, jiffies + (HZ*5));
 639
 640         if (cardp->fwfinalblk) {
 641                 cardp->fwdnldover = 1;
 642                 goto exit;
 643         }
 644
 645         if_usb_send_fw_pkt(cardp);
 646
 647  exit:
 648         if_usb_submit_rx_urb_fwload(cardp);
 649
 650         kfree(syncfwheader);
 651
 652         return;
 653 }
 654
 655 #define MRVDRV_MIN_PKT_LEN      30
 656
 657 static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
 658                                        struct if_usb_card *cardp,
 659                                        struct lbs_private *priv)
 660 {
 661         if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN
 662             || recvlength < MRVDRV_MIN_PKT_LEN) {
 663                 lbs_deb_usbd(&cardp->udev->dev, "Packet length is Invalid\n");
 664                 kfree_skb(skb);
 665                 return;
 666         }
 667
 668         skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
 669         skb_put(skb, recvlength);
 670         skb_pull(skb, MESSAGE_HEADER_LEN);
 671
 672         lbs_process_rxed_packet(priv, skb);
 673 }
 674
 675 static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
 676                                       struct sk_buff *skb,
 677                                       struct if_usb_card *cardp,
 678                                       struct lbs_private *priv)
 679 {
 680         u8 i;
 681
 682         if (recvlength > LBS_CMD_BUFFER_SIZE) {
 683                 lbs_deb_usbd(&cardp->udev->dev,
 684                              "The receive buffer is too large\n");
 685                 kfree_skb(skb);
 686                 return;
 687         }
 688
 689         if (!in_interrupt())
 690                 BUG();
 691
 692         spin_lock(&priv->driver_lock);
 693
 694         i = (priv->resp_idx == 0) ? 1 : 0;
 695         BUG_ON(priv->resp_len[i]);
 696         priv->resp_len[i] = (recvlength - MESSAGE_HEADER_LEN);
 697         memcpy(priv->resp_buf[i], recvbuff + MESSAGE_HEADER_LEN,
 698                 priv->resp_len[i]);
 699         kfree_skb(skb);
 700         lbs_notify_command_response(priv, i);
 701
 702         spin_unlock(&priv->driver_lock);
 703
 704         lbs_deb_usbd(&cardp->udev->dev,
 705                     "Wake up main thread to handle cmd response\n");
 706 }
 707
 708 /**
 709  *  @brief This function reads of the packet into the upload buff,
 710  *  wake up the main thread and initialise the Rx callack.
 711  *
 712  *  @param urb          pointer to struct urb
 713  *  @return             N/A
 714  */
 715 static void if_usb_receive(struct urb *urb)
 716 {
 717         struct if_usb_card *cardp = urb->context;
 718         struct sk_buff *skb = cardp->rx_skb;
 719         struct lbs_private *priv = cardp->priv;
 720         int recvlength = urb->actual_length;
 721         uint8_t *recvbuff = NULL;
 722         uint32_t recvtype = 0;
 723         __le32 *pkt = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
 724         uint32_t event;
 725
 726         lbs_deb_enter(LBS_DEB_USB);
 727
 728         if (recvlength) {
 729                 if (urb->status) {
 730                         lbs_deb_usbd(&cardp->udev->dev, "RX URB failed: %d\n",
 731                                      urb->status);
 732                         kfree_skb(skb);
 733                         goto setup_for_next;
 734                 }
 735
 736                 recvbuff = skb->data + IPFIELD_ALIGN_OFFSET;
 737                 recvtype = le32_to_cpu(pkt[0]);
 738                 lbs_deb_usbd(&cardp->udev->dev,
 739                             "Recv length = 0x%x, Recv type = 0x%X\n",
 740                             recvlength, recvtype);
 741         } else if (urb->status) {
 742                 kfree_skb(skb);
 743                 goto rx_exit;
 744         }
 745
 746         switch (recvtype) {
 747         case CMD_TYPE_DATA:
 748                 process_cmdtypedata(recvlength, skb, cardp, priv);
 749                 break;
 750
 751         case CMD_TYPE_REQUEST:
 752                 process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
 753                 break;
 754
 755         case CMD_TYPE_INDICATION:
 756                 /* Event handling */
 757                 event = le32_to_cpu(pkt[1]);
 758                 lbs_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event);
 759                 kfree_skb(skb);
 760
 761                 /* Icky undocumented magic special case */
 762                 if (event & 0xffff0000) {
 763                         u32 trycount = (event & 0xffff0000) >> 16;
 764
 765                         lbs_send_tx_feedback(priv, trycount);
 766                 } else
 767                         lbs_queue_event(priv, event & 0xFF);
 768                 break;
 769
 770         default:
 771                 lbs_deb_usbd(&cardp->udev->dev, "Unknown command type 0x%X\n",
 772                              recvtype);
 773                 kfree_skb(skb);
 774                 break;
 775         }
 776
 777 setup_for_next:
 778         if_usb_submit_rx_urb(cardp);
 779 rx_exit:
 780         lbs_deb_leave(LBS_DEB_USB);
 781 }
 782
 783 /**
 784  *  @brief This function downloads data to FW
 785  *  @param priv         pointer to struct lbs_private structure
 786  *  @param type         type of data
 787  *  @param buf          pointer to data buffer
 788  *  @param len          number of bytes
 789  *  @return             0 or -1
 790  */
 791 static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
 792                                uint8_t *payload, uint16_t nb)
 793 {
 794         struct if_usb_card *cardp = priv->card;
 795
 796         lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type);
 797         lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb);
 798
 799         if (type == MVMS_CMD) {
 800                 *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
 801                 priv->dnld_sent = DNLD_CMD_SENT;
 802         } else {
 803                 *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA);
 804                 priv->dnld_sent = DNLD_DATA_SENT;
 805         }
 806
 807         memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb);
 808
 809         return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN);
 810 }
 811
 812 /**
 813  *  @brief This function issues Boot command to the Boot2 code
 814  *  @param ivalue   1:Boot from FW by USB-Download
 815  *                  2:Boot from FW in EEPROM
 816  *  @return             0
 817  */
 818 static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
 819 {
 820         struct bootcmd *bootcmd = cardp->ep_out_buf;
 821
 822         /* Prepare command */
 823         bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
 824         bootcmd->cmd = ivalue;
 825         memset(bootcmd->pad, 0, sizeof(bootcmd->pad));
 826
 827         /* Issue command */
 828         usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd));
 829
 830         return 0;
 831 }
 832
 833
 834 /**
 835  *  @brief This function checks the validity of Boot2/FW image.
 836  *
 837  *  @param data              pointer to image
 838  *         len               image length
 839  *  @return     0 or -1
 840  */
 841 static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
 842 {
 843         uint32_t bincmd, exit;
 844         uint32_t blksize, offset, len;
 845         int ret;
 846
 847         ret = 1;
 848         exit = len = 0;
 849
 850         do {
 851                 struct fwheader *fwh = (void *)data;
 852
 853                 bincmd = le32_to_cpu(fwh->dnldcmd);
 854                 blksize = le32_to_cpu(fwh->datalength);
 855                 switch (bincmd) {
 856                 case FW_HAS_DATA_TO_RECV:
 857                         offset = sizeof(struct fwheader) + blksize;
 858                         data += offset;
 859                         len += offset;
 860                         if (len >= totlen)
 861                                 exit = 1;
 862                         break;
 863                 case FW_HAS_LAST_BLOCK:
 864                         exit = 1;
 865                         ret = 0;
 866                         break;
 867                 default:
 868                         exit = 1;
 869                         break;
 870                 }
 871         } while (!exit);
 872
 873         if (ret)
 874                 lbs_pr_err("firmware file format check FAIL\n");
 875         else
 876                 lbs_deb_fw("firmware file format check PASS\n");
 877
 878         return ret;
 879 }
 880
 881
 882 /**
 883 *  @brief This function programs the firmware subject to cmd
 884 *
 885 *  @param cardp             the if_usb_card descriptor
 886 *         fwname            firmware or boot2 image file name
 887 *         cmd               either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
 888 *                           or BOOT_CMD_UPDATE_BOOT2.
 889 *  @return     0 or error code
 890 */
 891 static int if_usb_prog_firmware(struct if_usb_card *cardp,
 892                                 const char *fwname, int cmd)
 893 {
 894         struct lbs_private *priv = cardp->priv;
 895         unsigned long flags, caps;
 896         int ret;
 897
 898         caps = priv->fwcapinfo;
 899         if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
 900             ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
 901                 return -EOPNOTSUPP;
 902
 903         /* Ensure main thread is idle. */
 904         spin_lock_irqsave(&priv->driver_lock, flags);
 905         while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
 906                 spin_unlock_irqrestore(&priv->driver_lock, flags);
 907                 if (wait_event_interruptible(priv->waitq,
 908                                 (priv->cur_cmd == NULL &&
 909                                 priv->dnld_sent == DNLD_RES_RECEIVED))) {
 910                         return -ERESTARTSYS;
 911                 }
 912                 spin_lock_irqsave(&priv->driver_lock, flags);
 913         }
 914         priv->dnld_sent = DNLD_BOOTCMD_SENT;
 915         spin_unlock_irqrestore(&priv->driver_lock, flags);
 916
 917         ret = __if_usb_prog_firmware(cardp, fwname, cmd);
 918
 919         spin_lock_irqsave(&priv->driver_lock, flags);
 920         priv->dnld_sent = DNLD_RES_RECEIVED;
 921         spin_unlock_irqrestore(&priv->driver_lock, flags);
 922
 923         wake_up_interruptible(&priv->waitq);
 924
 925         return ret;
 926 }
 927
 928 static int __if_usb_prog_firmware(struct if_usb_card *cardp,
 929                                         const char *fwname, int cmd)
 930 {
 931         int i = 0;
 932         static int reset_count = 10;
 933         int ret = 0;
 934
 935         lbs_deb_enter(LBS_DEB_USB);
 936
 937         ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
 938         if (ret < 0) {
 939                 lbs_pr_err("request_firmware() failed with %#x\n", ret);
 940                 lbs_pr_err("firmware %s not found\n", fwname);
 941                 goto done;
 942         }
 943
 944         if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
 945                 ret = -EINVAL;
 946                 goto release_fw;
 947         }
 948
 949         /* Cancel any pending usb business */
 950         usb_kill_urb(cardp->rx_urb);
 951         usb_kill_urb(cardp->tx_urb);
 952
 953         cardp->fwlastblksent = 0;
 954         cardp->fwdnldover = 0;
 955         cardp->totalbytes = 0;
 956         cardp->fwfinalblk = 0;
 957         cardp->bootcmdresp = 0;
 958
 959 restart:
 960         if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
 961                 lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
 962                 ret = -EIO;
 963                 goto release_fw;
 964         }
 965
 966         cardp->bootcmdresp = 0;
 967         do {
 968                 int j = 0;
 969                 i++;
 970                 if_usb_issue_boot_command(cardp, cmd);
 971                 /* wait for command response */
 972                 do {
 973                         j++;
 974                         msleep_interruptible(100);
 975                 } while (cardp->bootcmdresp == 0 && j < 10);
 976         } while (cardp->bootcmdresp == 0 && i < 5);
 977
 978         if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) {
 979                 /* Return to normal operation */
 980                 ret = -EOPNOTSUPP;
 981                 usb_kill_urb(cardp->rx_urb);
 982                 usb_kill_urb(cardp->tx_urb);
 983                 if (if_usb_submit_rx_urb(cardp) < 0)
 984                         ret = -EIO;
 985                 goto release_fw;
 986         } else if (cardp->bootcmdresp <= 0) {
 987                 if (--reset_count >= 0) {
 988                         if_usb_reset_device(cardp);
 989                         goto restart;
 990                 }
 991                 ret = -EIO;
 992                 goto release_fw;
 993         }
 994
 995         i = 0;
 996
 997         cardp->totalbytes = 0;
 998         cardp->fwlastblksent = 0;
 999         cardp->CRC_OK = 1;
1000         cardp->fwdnldover = 0;
1001         cardp->fwseqnum = -1;
1002         cardp->totalbytes = 0;
1003         cardp->fwfinalblk = 0;
1004
1005         /* Send the first firmware packet... */
1006         if_usb_send_fw_pkt(cardp);
1007
1008         /* ... and wait for the process to complete */
1009         wait_event_interruptible(cardp->fw_wq, cardp->surprise_removed || cardp->fwdnldover);
1010
1011         del_timer_sync(&cardp->fw_timeout);
1012         usb_kill_urb(cardp->rx_urb);
1013
1014         if (!cardp->fwdnldover) {
1015                 lbs_pr_info("failed to load fw, resetting device!\n");
1016                 if (--reset_count >= 0) {
1017                         if_usb_reset_device(cardp);
1018                         goto restart;
1019                 }
1020
1021                 lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
1022                 ret = -EIO;
1023                 goto release_fw;
1024         }
1025
1026  release_fw:
1027         release_firmware(cardp->fw);
1028         cardp->fw = NULL;
1029
1030  done:
1031         lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
1032         return ret;
1033 }
1034
1035
1036 #ifdef CONFIG_PM
1037 static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
1038 {
1039         struct if_usb_card *cardp = usb_get_intfdata(intf);
1040         struct lbs_private *priv = cardp->priv;
1041         int ret;
1042
1043         lbs_deb_enter(LBS_DEB_USB);
1044
1045         if (priv->psstate != PS_STATE_FULL_POWER)
1046                 return -1;
1047
1048         ret = lbs_suspend(priv);
1049         if (ret)
1050                 goto out;
1051
1052         /* Unlink tx & rx urb */
1053         usb_kill_urb(cardp->tx_urb);
1054         usb_kill_urb(cardp->rx_urb);
1055
1056  out:
1057         lbs_deb_leave(LBS_DEB_USB);
1058         return ret;
1059 }
1060
1061 static int if_usb_resume(struct usb_interface *intf)
1062 {
1063         struct if_usb_card *cardp = usb_get_intfdata(intf);
1064         struct lbs_private *priv = cardp->priv;
1065
1066         lbs_deb_enter(LBS_DEB_USB);
1067
1068         if_usb_submit_rx_urb(cardp);
1069
1070         lbs_resume(priv);
1071
1072         lbs_deb_leave(LBS_DEB_USB);
1073         return 0;
1074 }
1075 #else
1076 #define if_usb_suspend NULL
1077 #define if_usb_resume NULL
1078 #endif
1079
1080 static struct usb_driver if_usb_driver = {
1081         .name = DRV_NAME,
1082         .probe = if_usb_probe,
1083         .disconnect = if_usb_disconnect,
1084         .id_table = if_usb_table,
1085         .suspend = if_usb_suspend,
1086         .resume = if_usb_resume,
1087         .reset_resume = if_usb_resume,
1088 };
1089
1090 static int __init if_usb_init_module(void)
1091 {
1092         int ret = 0;
1093
1094         lbs_deb_enter(LBS_DEB_MAIN);
1095
1096         ret = usb_register(&if_usb_driver);
1097
1098         lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
1099         return ret;
1100 }
1101
1102 static void __exit if_usb_exit_module(void)
1103 {
1104         lbs_deb_enter(LBS_DEB_MAIN);
1105
1106         usb_deregister(&if_usb_driver);
1107
1108         lbs_deb_leave(LBS_DEB_MAIN);
1109 }
1110
1111 module_init(if_usb_init_module);
1112 module_exit(if_usb_exit_module);
1113
1114 MODULE_DESCRIPTION("8388 USB WLAN Driver");
1115 MODULE_AUTHOR("Marvell International Ltd. and Red Hat, Inc.");
1116 MODULE_LICENSE("GPL");