git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/boot/dts/lite5200b.dts

   1 /*
   2  * Lite5200B board Device Tree Source
   3  *
   4  * Copyright 2006-2007 Secret Lab Technologies Ltd.
   5  * Grant Likely <grant.likely@secretlab.ca>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /*
  14  * WARNING: Do not depend on this tree layout remaining static just yet.
  15  * The MPC5200 device tree conventions are still in flux
  16  * Keep an eye on the linuxppc-dev mailing list for more details
  17  */
  18
  19 / {
  20         model = "fsl,lite5200b";
  21         // revision = "1.0";
  22         compatible = "fsl,lite5200b","generic-mpc5200";
  23         #address-cells = <1>;
  24         #size-cells = <1>;
  25
  26         cpus {
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29
  30                 PowerPC,5200@0 {
  31                         device_type = "cpu";
  32                         reg = <0>;
  33                         d-cache-line-size = <20>;
  34                         i-cache-line-size = <20>;
  35                         d-cache-size = <4000>;          // L1, 16K
  36                         i-cache-size = <4000>;          // L1, 16K
  37                         timebase-frequency = <0>;       // from bootloader
  38                         bus-frequency = <0>;            // from bootloader
  39                         clock-frequency = <0>;          // from bootloader
  40                 };
  41         };
  42
  43         memory {
  44                 device_type = "memory";
  45                 reg = <00000000 10000000>;      // 256MB
  46         };
  47
  48         soc5200@f0000000 {
  49                 model = "fsl,mpc5200b";
  50                 compatible = "mpc5200";
  51                 revision = "";                  // from bootloader
  52                 device_type = "soc";
  53                 ranges = <0 f0000000 0000c000>;
  54                 reg = <f0000000 00000100>;
  55                 bus-frequency = <0>;            // from bootloader
  56                 system-frequency = <0>;         // from bootloader
  57
  58                 cdm@200 {
  59                         compatible = "mpc5200b-cdm","mpc5200-cdm";
  60                         reg = <200 38>;
  61                 };
  62
  63                 mpc5200_pic: pic@500 {
  64                         // 5200 interrupts are encoded into two levels;
  65                         interrupt-controller;
  66                         #interrupt-cells = <3>;
  67                         device_type = "interrupt-controller";
  68                         compatible = "mpc5200b-pic","mpc5200-pic";
  69                         reg = <500 80>;
  70                 };
  71
  72                 gpt@600 {       // General Purpose Timer
  73                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  74                         cell-index = <0>;
  75                         reg = <600 10>;
  76                         interrupts = <1 9 0>;
  77                         interrupt-parent = <&mpc5200_pic>;
  78                         fsl,has-wdt;
  79                 };
  80
  81                 gpt@610 {       // General Purpose Timer
  82                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  83                         cell-index = <1>;
  84                         reg = <610 10>;
  85                         interrupts = <1 a 0>;
  86                         interrupt-parent = <&mpc5200_pic>;
  87                 };
  88
  89                 gpt@620 {       // General Purpose Timer
  90                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  91                         cell-index = <2>;
  92                         reg = <620 10>;
  93                         interrupts = <1 b 0>;
  94                         interrupt-parent = <&mpc5200_pic>;
  95                 };
  96
  97                 gpt@630 {       // General Purpose Timer
  98                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  99                         cell-index = <3>;
 100                         reg = <630 10>;
 101                         interrupts = <1 c 0>;
 102                         interrupt-parent = <&mpc5200_pic>;
 103                 };
 104
 105                 gpt@640 {       // General Purpose Timer
 106                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 107                         cell-index = <4>;
 108                         reg = <640 10>;
 109                         interrupts = <1 d 0>;
 110                         interrupt-parent = <&mpc5200_pic>;
 111                 };
 112
 113                 gpt@650 {       // General Purpose Timer
 114                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 115                         cell-index = <5>;
 116                         reg = <650 10>;
 117                         interrupts = <1 e 0>;
 118                         interrupt-parent = <&mpc5200_pic>;
 119                 };
 120
 121                 gpt@660 {       // General Purpose Timer
 122                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 123                         cell-index = <6>;
 124                         reg = <660 10>;
 125                         interrupts = <1 f 0>;
 126                         interrupt-parent = <&mpc5200_pic>;
 127                 };
 128
 129                 gpt@670 {       // General Purpose Timer
 130                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 131                         cell-index = <7>;
 132                         reg = <670 10>;
 133                         interrupts = <1 10 0>;
 134                         interrupt-parent = <&mpc5200_pic>;
 135                 };
 136
 137                 rtc@800 {       // Real time clock
 138                         compatible = "mpc5200b-rtc","mpc5200-rtc";
 139                         device_type = "rtc";
 140                         reg = <800 100>;
 141                         interrupts = <1 5 0 1 6 0>;
 142                         interrupt-parent = <&mpc5200_pic>;
 143                 };
 144
 145                 mscan@900 {
 146                         device_type = "mscan";
 147                         compatible = "mpc5200b-mscan","mpc5200-mscan";
 148                         cell-index = <0>;
 149                         interrupts = <2 11 0>;
 150                         interrupt-parent = <&mpc5200_pic>;
 151                         reg = <900 80>;
 152                 };
 153
 154                 mscan@980 {
 155                         device_type = "mscan";
 156                         compatible = "mpc5200b-mscan","mpc5200-mscan";
 157                         cell-index = <1>;
 158                         interrupts = <2 12 0>;
 159                         interrupt-parent = <&mpc5200_pic>;
 160                         reg = <980 80>;
 161                 };
 162
 163                 gpio@b00 {
 164                         compatible = "mpc5200b-gpio","mpc5200-gpio";
 165                         reg = <b00 40>;
 166                         interrupts = <1 7 0>;
 167                         interrupt-parent = <&mpc5200_pic>;
 168                 };
 169
 170                 gpio-wkup@c00 {
 171                         compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
 172                         reg = <c00 40>;
 173                         interrupts = <1 8 0 0 3 0>;
 174                         interrupt-parent = <&mpc5200_pic>;
 175                 };
 176
 177                 spi@f00 {
 178                         device_type = "spi";
 179                         compatible = "mpc5200b-spi","mpc5200-spi";
 180                         reg = <f00 20>;
 181                         interrupts = <2 d 0 2 e 0>;
 182                         interrupt-parent = <&mpc5200_pic>;
 183                 };
 184
 185                 usb@1000 {
 186                         device_type = "usb-ohci-be";
 187                         compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
 188                         reg = <1000 ff>;
 189                         interrupts = <2 6 0>;
 190                         interrupt-parent = <&mpc5200_pic>;
 191                 };
 192
 193                 bestcomm@1200 {
 194                         device_type = "dma-controller";
 195                         compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
 196                         reg = <1200 80>;
 197                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 198                                       3 4 0  3 5 0  3 6 0  3 7 0
 199                                       3 8 0  3 9 0  3 a 0  3 b 0
 200                                       3 c 0  3 d 0  3 e 0  3 f 0>;
 201                         interrupt-parent = <&mpc5200_pic>;
 202                 };
 203
 204                 xlb@1f00 {
 205                         compatible = "mpc5200b-xlb","mpc5200-xlb";
 206                         reg = <1f00 100>;
 207                 };
 208
 209                 serial@2000 {           // PSC1
 210                         device_type = "serial";
 211                         compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
 212                         port-number = <0>;  // Logical port assignment
 213                         cell-index = <0>;
 214                         reg = <2000 100>;
 215                         interrupts = <2 1 0>;
 216                         interrupt-parent = <&mpc5200_pic>;
 217                 };
 218
 219                 // PSC2 in ac97 mode example
 220                 //ac97@2200 {           // PSC2
 221                 //      device_type = "sound";
 222                 //      compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97";
 223                 //      cell-index = <1>;
 224                 //      reg = <2200 100>;
 225                 //      interrupts = <2 2 0>;
 226                 //      interrupt-parent = <&mpc5200_pic>;
 227                 //};
 228
 229                 // PSC3 in CODEC mode example
 230                 //i2s@2400 {            // PSC3
 231                 //      device_type = "sound";
 232                 //      compatible = "mpc5200b-psc-i2s"; //not 5200 compatible
 233                 //      cell-index = <2>;
 234                 //      reg = <2400 100>;
 235                 //      interrupts = <2 3 0>;
 236                 //      interrupt-parent = <&mpc5200_pic>;
 237                 //};
 238
 239                 // PSC4 in uart mode example
 240                 //serial@2600 {         // PSC4
 241                 //      device_type = "serial";
 242                 //      compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
 243                 //      cell-index = <3>;
 244                 //      reg = <2600 100>;
 245                 //      interrupts = <2 b 0>;
 246                 //      interrupt-parent = <&mpc5200_pic>;
 247                 //};
 248
 249                 // PSC5 in uart mode example
 250                 //serial@2800 {         // PSC5
 251                 //      device_type = "serial";
 252                 //      compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
 253                 //      cell-index = <4>;
 254                 //      reg = <2800 100>;
 255                 //      interrupts = <2 c 0>;
 256                 //      interrupt-parent = <&mpc5200_pic>;
 257                 //};
 258
 259                 // PSC6 in spi mode example
 260                 //spi@2c00 {            // PSC6
 261                 //      device_type = "spi";
 262                 //      compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
 263                 //      cell-index = <5>;
 264                 //      reg = <2c00 100>;
 265                 //      interrupts = <2 4 0>;
 266                 //      interrupt-parent = <&mpc5200_pic>;
 267                 //};
 268
 269                 ethernet@3000 {
 270                         device_type = "network";
 271                         compatible = "mpc5200b-fec","mpc5200-fec";
 272                         reg = <3000 400>;
 273                         mac-address = [ 02 03 04 05 06 07 ]; // Bad!
 274                         interrupts = <2 5 0>;
 275                         interrupt-parent = <&mpc5200_pic>;
 276                         phy-handle = <&phy0>;
 277                 };
 278
 279                 mdio@3000 {
 280                         #address-cells = <1>;
 281                         #size-cells = <0>;
 282                         device_type = "mdio";
 283                         compatible = "mpc5200b-fec-phy";
 284                         reg = <3000 400>;       // fec range, since we need to setup fec interrupts
 285                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 286                         interrupt-parent = <&mpc5200_pic>;
 287
 288                         phy0:ethernet-phy@0 {
 289                                 device_type = "ethernet-phy";
 290                                 reg = <0>;
 291                         };
 292                 };
 293
 294                 ata@3a00 {
 295                         device_type = "ata";
 296                         compatible = "mpc5200b-ata","mpc5200-ata";
 297                         reg = <3a00 100>;
 298                         interrupts = <2 7 0>;
 299                         interrupt-parent = <&mpc5200_pic>;
 300                 };
 301
 302                 i2c@3d00 {
 303                         device_type = "i2c";
 304                         compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
 305                         cell-index = <0>;
 306                         reg = <3d00 40>;
 307                         interrupts = <2 f 0>;
 308                         interrupt-parent = <&mpc5200_pic>;
 309                         fsl5200-clocking;
 310                 };
 311
 312                 i2c@3d40 {
 313                         device_type = "i2c";
 314                         compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
 315                         cell-index = <1>;
 316                         reg = <3d40 40>;
 317                         interrupts = <2 10 0>;
 318                         interrupt-parent = <&mpc5200_pic>;
 319                         fsl5200-clocking;
 320                 };
 321                 sram@8000 {
 322                         device_type = "sram";
 323                         compatible = "mpc5200b-sram","mpc5200-sram","sram";
 324                         reg = <8000 4000>;
 325                 };
 326         };
 327
 328         pci@f0000d00 {
 329                 #interrupt-cells = <1>;
 330                 #size-cells = <2>;
 331                 #address-cells = <3>;
 332                 device_type = "pci";
 333                 compatible = "mpc5200b-pci","mpc5200-pci";
 334                 reg = <f0000d00 100>;
 335                 interrupt-map-mask = <f800 0 0 7>;
 336                 interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 337                                  c000 0 0 2 &mpc5200_pic 1 1 3
 338                                  c000 0 0 3 &mpc5200_pic 1 2 3
 339                                  c000 0 0 4 &mpc5200_pic 1 3 3
 340
 341                                  c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
 342                                  c800 0 0 2 &mpc5200_pic 1 2 3
 343                                  c800 0 0 3 &mpc5200_pic 1 3 3
 344                                  c800 0 0 4 &mpc5200_pic 0 0 3>;
 345                 clock-frequency = <0>; // From boot loader
 346                 interrupts = <2 8 0 2 9 0 2 a 0>;
 347                 interrupt-parent = <&mpc5200_pic>;
 348                 bus-range = <0 0>;
 349                 ranges = <42000000 0 80000000 80000000 0 20000000
 350                           02000000 0 a0000000 a0000000 0 10000000
 351                           01000000 0 00000000 b0000000 0 01000000>;
 352         };
 353 };