git.oblomov.eu Git - linux-2.6/blob - drivers/hwmon/thmc50.c

   1 /*
   2     thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
   3              monitoring
   4     Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
   5     Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
   6     Philip Edelbrock <phil@netroedge.com>
   7
   8     This program is free software; you can redistribute it and/or modify
   9     it under the terms of the GNU General Public License as published by
  10     the Free Software Foundation; either version 2 of the License, or
  11     (at your option) any later version.
  12
  13     This program is distributed in the hope that it will be useful,
  14     but WITHOUT ANY WARRANTY; without even the implied warranty of
  15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16     GNU General Public License for more details.
  17
  18     You should have received a copy of the GNU General Public License
  19     along with this program; if not, write to the Free Software
  20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21 */
  22
  23 #include <linux/module.h>
  24 #include <linux/init.h>
  25 #include <linux/slab.h>
  26 #include <linux/i2c.h>
  27 #include <linux/hwmon.h>
  28 #include <linux/hwmon-sysfs.h>
  29 #include <linux/err.h>
  30 #include <linux/mutex.h>
  31
  32 MODULE_LICENSE("GPL");
  33
  34 /* Addresses to scan */
  35 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
  36
  37 /* Insmod parameters */
  38 I2C_CLIENT_INSMOD_2(thmc50, adm1022);
  39 I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
  40                         "to enable 3rd temperature (ADM1022 only)");
  41
  42 /* Many THMC50 constants specified below */
  43
  44 /* The THMC50 registers */
  45 #define THMC50_REG_CONF                         0x40
  46 #define THMC50_REG_COMPANY_ID                   0x3E
  47 #define THMC50_REG_DIE_CODE                     0x3F
  48 #define THMC50_REG_ANALOG_OUT                   0x19
  49 /*
  50  * The mirror status register cannot be used as
  51  * reading it does not clear alarms.
  52  */
  53 #define THMC50_REG_INTR                         0x41
  54
  55 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
  56 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
  57 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
  58 static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
  59 static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
  60
  61 #define THMC50_REG_CONF_nFANOFF                 0x20
  62 #define THMC50_REG_CONF_PROGRAMMED              0x08
  63
  64 /* Each client has this additional data */
  65 struct thmc50_data {
  66         struct device *hwmon_dev;
  67
  68         struct mutex update_lock;
  69         enum chips type;
  70         unsigned long last_updated;     /* In jiffies */
  71         char has_temp3;         /* !=0 if it is ADM1022 in temp3 mode */
  72         char valid;             /* !=0 if following fields are valid */
  73
  74         /* Register values */
  75         s8 temp_input[3];
  76         s8 temp_max[3];
  77         s8 temp_min[3];
  78         s8 temp_critical[3];
  79         u8 analog_out;
  80         u8 alarms;
  81 };
  82
  83 static int thmc50_detect(struct i2c_client *client, int kind,
  84                          struct i2c_board_info *info);
  85 static int thmc50_probe(struct i2c_client *client,
  86                         const struct i2c_device_id *id);
  87 static int thmc50_remove(struct i2c_client *client);
  88 static void thmc50_init_client(struct i2c_client *client);
  89 static struct thmc50_data *thmc50_update_device(struct device *dev);
  90
  91 static const struct i2c_device_id thmc50_id[] = {
  92         { "adm1022", adm1022 },
  93         { "thmc50", thmc50 },
  94         { }
  95 };
  96 MODULE_DEVICE_TABLE(i2c, thmc50_id);
  97
  98 static struct i2c_driver thmc50_driver = {
  99         .class = I2C_CLASS_HWMON,
 100         .driver = {
 101                 .name = "thmc50",
 102         },
 103         .probe = thmc50_probe,
 104         .remove = thmc50_remove,
 105         .id_table = thmc50_id,
 106         .detect = thmc50_detect,
 107         .address_data = &addr_data,
 108 };
 109
 110 static ssize_t show_analog_out(struct device *dev,
 111                                struct device_attribute *attr, char *buf)
 112 {
 113         struct thmc50_data *data = thmc50_update_device(dev);
 114         return sprintf(buf, "%d\n", data->analog_out);
 115 }
 116
 117 static ssize_t set_analog_out(struct device *dev,
 118                               struct device_attribute *attr,
 119                               const char *buf, size_t count)
 120 {
 121         struct i2c_client *client = to_i2c_client(dev);
 122         struct thmc50_data *data = i2c_get_clientdata(client);
 123         int tmp = simple_strtoul(buf, NULL, 10);
 124         int config;
 125
 126         mutex_lock(&data->update_lock);
 127         data->analog_out = SENSORS_LIMIT(tmp, 0, 255);
 128         i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 129                                   data->analog_out);
 130
 131         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 132         if (data->analog_out == 0)
 133                 config &= ~THMC50_REG_CONF_nFANOFF;
 134         else
 135                 config |= THMC50_REG_CONF_nFANOFF;
 136         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 137
 138         mutex_unlock(&data->update_lock);
 139         return count;
 140 }
 141
 142 /* There is only one PWM mode = DC */
 143 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute *attr,
 144                              char *buf)
 145 {
 146         return sprintf(buf, "0\n");
 147 }
 148
 149 /* Temperatures */
 150 static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
 151                          char *buf)
 152 {
 153         int nr = to_sensor_dev_attr(attr)->index;
 154         struct thmc50_data *data = thmc50_update_device(dev);
 155         return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
 156 }
 157
 158 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
 159                              char *buf)
 160 {
 161         int nr = to_sensor_dev_attr(attr)->index;
 162         struct thmc50_data *data = thmc50_update_device(dev);
 163         return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
 164 }
 165
 166 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
 167                             const char *buf, size_t count)
 168 {
 169         int nr = to_sensor_dev_attr(attr)->index;
 170         struct i2c_client *client = to_i2c_client(dev);
 171         struct thmc50_data *data = i2c_get_clientdata(client);
 172         int val = simple_strtol(buf, NULL, 10);
 173
 174         mutex_lock(&data->update_lock);
 175         data->temp_min[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
 176         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
 177                                   data->temp_min[nr]);
 178         mutex_unlock(&data->update_lock);
 179         return count;
 180 }
 181
 182 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
 183                              char *buf)
 184 {
 185         int nr = to_sensor_dev_attr(attr)->index;
 186         struct thmc50_data *data = thmc50_update_device(dev);
 187         return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
 188 }
 189
 190 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
 191                             const char *buf, size_t count)
 192 {
 193         int nr = to_sensor_dev_attr(attr)->index;
 194         struct i2c_client *client = to_i2c_client(dev);
 195         struct thmc50_data *data = i2c_get_clientdata(client);
 196         int val = simple_strtol(buf, NULL, 10);
 197
 198         mutex_lock(&data->update_lock);
 199         data->temp_max[nr] = SENSORS_LIMIT(val / 1000, -128, 127);
 200         i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
 201                                   data->temp_max[nr]);
 202         mutex_unlock(&data->update_lock);
 203         return count;
 204 }
 205
 206 static ssize_t show_temp_critical(struct device *dev,
 207                                   struct device_attribute *attr,
 208                                   char *buf)
 209 {
 210         int nr = to_sensor_dev_attr(attr)->index;
 211         struct thmc50_data *data = thmc50_update_device(dev);
 212         return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
 213 }
 214
 215 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 216                           char *buf)
 217 {
 218         int index = to_sensor_dev_attr(attr)->index;
 219         struct thmc50_data *data = thmc50_update_device(dev);
 220
 221         return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
 222 }
 223
 224 #define temp_reg(offset)                                                \
 225 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp,     \
 226                         NULL, offset - 1);                              \
 227 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
 228                         show_temp_min, set_temp_min, offset - 1);       \
 229 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,        \
 230                         show_temp_max, set_temp_max, offset - 1);       \
 231 static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO,                 \
 232                         show_temp_critical, NULL, offset - 1);
 233
 234 temp_reg(1);
 235 temp_reg(2);
 236 temp_reg(3);
 237
 238 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 0);
 239 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
 240 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 1);
 241 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 7);
 242 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
 243
 244 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_analog_out,
 245                           set_analog_out, 0);
 246 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
 247
 248 static struct attribute *thmc50_attributes[] = {
 249         &sensor_dev_attr_temp1_max.dev_attr.attr,
 250         &sensor_dev_attr_temp1_min.dev_attr.attr,
 251         &sensor_dev_attr_temp1_input.dev_attr.attr,
 252         &sensor_dev_attr_temp1_crit.dev_attr.attr,
 253         &sensor_dev_attr_temp1_alarm.dev_attr.attr,
 254         &sensor_dev_attr_temp2_max.dev_attr.attr,
 255         &sensor_dev_attr_temp2_min.dev_attr.attr,
 256         &sensor_dev_attr_temp2_input.dev_attr.attr,
 257         &sensor_dev_attr_temp2_crit.dev_attr.attr,
 258         &sensor_dev_attr_temp2_alarm.dev_attr.attr,
 259         &sensor_dev_attr_temp2_fault.dev_attr.attr,
 260         &sensor_dev_attr_pwm1.dev_attr.attr,
 261         &sensor_dev_attr_pwm1_mode.dev_attr.attr,
 262         NULL
 263 };
 264
 265 static const struct attribute_group thmc50_group = {
 266         .attrs = thmc50_attributes,
 267 };
 268
 269 /* for ADM1022 3rd temperature mode */
 270 static struct attribute *temp3_attributes[] = {
 271         &sensor_dev_attr_temp3_max.dev_attr.attr,
 272         &sensor_dev_attr_temp3_min.dev_attr.attr,
 273         &sensor_dev_attr_temp3_input.dev_attr.attr,
 274         &sensor_dev_attr_temp3_crit.dev_attr.attr,
 275         &sensor_dev_attr_temp3_alarm.dev_attr.attr,
 276         &sensor_dev_attr_temp3_fault.dev_attr.attr,
 277         NULL
 278 };
 279
 280 static const struct attribute_group temp3_group = {
 281         .attrs = temp3_attributes,
 282 };
 283
 284 /* Return 0 if detection is successful, -ENODEV otherwise */
 285 static int thmc50_detect(struct i2c_client *client, int kind,
 286                          struct i2c_board_info *info)
 287 {
 288         unsigned company;
 289         unsigned revision;
 290         unsigned config;
 291         struct i2c_adapter *adapter = client->adapter;
 292         int err = 0;
 293         const char *type_name;
 294
 295         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 296                 pr_debug("thmc50: detect failed, "
 297                          "smbus byte data not supported!\n");
 298                 return -ENODEV;
 299         }
 300
 301         pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
 302                  client->addr, i2c_adapter_id(client->adapter));
 303
 304         /* Now, we do the remaining detection. */
 305         company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
 306         revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
 307         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 308
 309         if (kind == 0)
 310                 kind = thmc50;
 311         else if (kind < 0) {
 312                 err = -ENODEV;
 313                 if (revision >= 0xc0 && ((config & 0x10) == 0)) {
 314                         if (company == 0x49) {
 315                                 kind = thmc50;
 316                                 err = 0;
 317                         } else if (company == 0x41) {
 318                                 kind = adm1022;
 319                                 err = 0;
 320                         }
 321                 }
 322         }
 323         if (err == -ENODEV) {
 324                 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
 325                 return err;
 326         }
 327
 328         if (kind == adm1022) {
 329                 int id = i2c_adapter_id(client->adapter);
 330                 int i;
 331
 332                 type_name = "adm1022";
 333                 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
 334                         if (adm1022_temp3[i] == id &&
 335                             adm1022_temp3[i + 1] == client->addr) {
 336                                 /* enable 2nd remote temp */
 337                                 config |= (1 << 7);
 338                                 i2c_smbus_write_byte_data(client,
 339                                                           THMC50_REG_CONF,
 340                                                           config);
 341                                 break;
 342                         }
 343         } else {
 344                 type_name = "thmc50";
 345         }
 346         pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
 347                  type_name, (revision >> 4) - 0xc, revision & 0xf);
 348
 349         strlcpy(info->type, type_name, I2C_NAME_SIZE);
 350
 351         return 0;
 352 }
 353
 354 static int thmc50_probe(struct i2c_client *client,
 355                         const struct i2c_device_id *id)
 356 {
 357         struct thmc50_data *data;
 358         int err;
 359
 360         data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL);
 361         if (!data) {
 362                 pr_debug("thmc50: detect failed, kzalloc failed!\n");
 363                 err = -ENOMEM;
 364                 goto exit;
 365         }
 366
 367         i2c_set_clientdata(client, data);
 368         data->type = id->driver_data;
 369         mutex_init(&data->update_lock);
 370
 371         thmc50_init_client(client);
 372
 373         /* Register sysfs hooks */
 374         if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group)))
 375                 goto exit_free;
 376
 377         /* Register ADM1022 sysfs hooks */
 378         if (data->has_temp3)
 379                 if ((err = sysfs_create_group(&client->dev.kobj,
 380                                               &temp3_group)))
 381                         goto exit_remove_sysfs_thmc50;
 382
 383         /* Register a new directory entry with module sensors */
 384         data->hwmon_dev = hwmon_device_register(&client->dev);
 385         if (IS_ERR(data->hwmon_dev)) {
 386                 err = PTR_ERR(data->hwmon_dev);
 387                 goto exit_remove_sysfs;
 388         }
 389
 390         return 0;
 391
 392 exit_remove_sysfs:
 393         if (data->has_temp3)
 394                 sysfs_remove_group(&client->dev.kobj, &temp3_group);
 395 exit_remove_sysfs_thmc50:
 396         sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 397 exit_free:
 398         kfree(data);
 399 exit:
 400         return err;
 401 }
 402
 403 static int thmc50_remove(struct i2c_client *client)
 404 {
 405         struct thmc50_data *data = i2c_get_clientdata(client);
 406
 407         hwmon_device_unregister(data->hwmon_dev);
 408         sysfs_remove_group(&client->dev.kobj, &thmc50_group);
 409         if (data->has_temp3)
 410                 sysfs_remove_group(&client->dev.kobj, &temp3_group);
 411
 412         kfree(data);
 413
 414         return 0;
 415 }
 416
 417 static void thmc50_init_client(struct i2c_client *client)
 418 {
 419         struct thmc50_data *data = i2c_get_clientdata(client);
 420         int config;
 421
 422         data->analog_out = i2c_smbus_read_byte_data(client,
 423                                                     THMC50_REG_ANALOG_OUT);
 424         /* set up to at least 1 */
 425         if (data->analog_out == 0) {
 426                 data->analog_out = 1;
 427                 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
 428                                           data->analog_out);
 429         }
 430         config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 431         config |= 0x1;  /* start the chip if it is in standby mode */
 432         if (data->type == adm1022 && (config & (1 << 7)))
 433                 data->has_temp3 = 1;
 434         i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
 435 }
 436
 437 static struct thmc50_data *thmc50_update_device(struct device *dev)
 438 {
 439         struct i2c_client *client = to_i2c_client(dev);
 440         struct thmc50_data *data = i2c_get_clientdata(client);
 441         int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
 442
 443         mutex_lock(&data->update_lock);
 444
 445         if (time_after(jiffies, data->last_updated + timeout)
 446             || !data->valid) {
 447
 448                 int temps = data->has_temp3 ? 3 : 2;
 449                 int i;
 450                 int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
 451
 452                 prog &= THMC50_REG_CONF_PROGRAMMED;
 453
 454                 for (i = 0; i < temps; i++) {
 455                         data->temp_input[i] = i2c_smbus_read_byte_data(client,
 456                                                 THMC50_REG_TEMP[i]);
 457                         data->temp_max[i] = i2c_smbus_read_byte_data(client,
 458                                                 THMC50_REG_TEMP_MAX[i]);
 459                         data->temp_min[i] = i2c_smbus_read_byte_data(client,
 460                                                 THMC50_REG_TEMP_MIN[i]);
 461                         data->temp_critical[i] =
 462                                 i2c_smbus_read_byte_data(client,
 463                                         prog ? THMC50_REG_TEMP_CRITICAL[i]
 464                                              : THMC50_REG_TEMP_DEFAULT[i]);
 465                 }
 466                 data->analog_out =
 467                     i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
 468                 data->alarms =
 469                     i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
 470                 data->last_updated = jiffies;
 471                 data->valid = 1;
 472         }
 473
 474         mutex_unlock(&data->update_lock);
 475
 476         return data;
 477 }
 478
 479 static int __init sm_thmc50_init(void)
 480 {
 481         return i2c_add_driver(&thmc50_driver);
 482 }
 483
 484 static void __exit sm_thmc50_exit(void)
 485 {
 486         i2c_del_driver(&thmc50_driver);
 487 }
 488
 489 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
 490 MODULE_DESCRIPTION("THMC50 driver");
 491
 492 module_init(sm_thmc50_init);
 493 module_exit(sm_thmc50_exit);