ide: unify interrupt reason checking
[linux-2.6] / include / linux / ide.h
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4  *  linux/include/linux/ide.h
5  *
6  *  Copyright (C) 1994-2002  Linus Torvalds & authors
7  */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/ata.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #include <linux/pm.h>
21 #ifdef CONFIG_BLK_DEV_IDEACPI
22 #include <acpi/acpi.h>
23 #endif
24 #include <asm/byteorder.h>
25 #include <asm/system.h>
26 #include <asm/io.h>
27 #include <asm/mutex.h>
28
29 /* for request_sense */
30 #include <linux/cdrom.h>
31
32 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
33 # define SUPPORT_VLB_SYNC 0
34 #else
35 # define SUPPORT_VLB_SYNC 1
36 #endif
37
38 /*
39  * Probably not wise to fiddle with these
40  */
41 #define IDE_DEFAULT_MAX_FAILURES        1
42 #define ERROR_MAX       8       /* Max read/write errors per sector */
43 #define ERROR_RESET     3       /* Reset controller every 4th retry */
44 #define ERROR_RECAL     1       /* Recalibrate every 2nd retry */
45
46 /* Error codes returned in rq->errors to the higher part of the driver. */
47 enum {
48         IDE_DRV_ERROR_GENERAL   = 101,
49         IDE_DRV_ERROR_FILEMARK  = 102,
50         IDE_DRV_ERROR_EOD       = 103,
51 };
52
53 /*
54  * Definitions for accessing IDE controller registers
55  */
56 #define IDE_NR_PORTS            (10)
57
58 struct ide_io_ports {
59         unsigned long   data_addr;
60
61         union {
62                 unsigned long error_addr;       /*   read:  error */
63                 unsigned long feature_addr;     /*  write: feature */
64         };
65
66         unsigned long   nsect_addr;
67         unsigned long   lbal_addr;
68         unsigned long   lbam_addr;
69         unsigned long   lbah_addr;
70
71         unsigned long   device_addr;
72
73         union {
74                 unsigned long status_addr;      /*  read: status  */
75                 unsigned long command_addr;     /* write: command */
76         };
77
78         unsigned long   ctl_addr;
79
80         unsigned long   irq_addr;
81 };
82
83 #define OK_STAT(stat,good,bad)  (((stat)&((good)|(bad)))==(good))
84
85 #define BAD_R_STAT      (ATA_BUSY | ATA_ERR)
86 #define BAD_W_STAT      (BAD_R_STAT | ATA_DF)
87 #define BAD_STAT        (BAD_R_STAT | ATA_DRQ)
88 #define DRIVE_READY     (ATA_DRDY | ATA_DSC)
89
90 #define BAD_CRC         (ATA_ABORTED | ATA_ICRC)
91
92 #define SATA_NR_PORTS           (3)     /* 16 possible ?? */
93
94 #define SATA_STATUS_OFFSET      (0)
95 #define SATA_ERROR_OFFSET       (1)
96 #define SATA_CONTROL_OFFSET     (2)
97
98 /*
99  * Our Physical Region Descriptor (PRD) table should be large enough
100  * to handle the biggest I/O request we are likely to see.  Since requests
101  * can have no more than 256 sectors, and since the typical blocksize is
102  * two or more sectors, we could get by with a limit of 128 entries here for
103  * the usual worst case.  Most requests seem to include some contiguous blocks,
104  * further reducing the number of table entries required.
105  *
106  * The driver reverts to PIO mode for individual requests that exceed
107  * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
108  * 100% of all crazy scenarios here is not necessary.
109  *
110  * As it turns out though, we must allocate a full 4KB page for this,
111  * so the two PRD tables (ide0 & ide1) will each get half of that,
112  * allowing each to have about 256 entries (8 bytes each) from this.
113  */
114 #define PRD_BYTES       8
115 #define PRD_ENTRIES     256
116
117 /*
118  * Some more useful definitions
119  */
120 #define PARTN_BITS      6       /* number of minor dev bits for partitions */
121 #define MAX_DRIVES      2       /* per interface; 2 assumed by lots of code */
122 #define SECTOR_SIZE     512
123
124 /*
125  * Timeouts for various operations:
126  */
127 enum {
128         /* spec allows up to 20ms */
129         WAIT_DRQ        = HZ / 10,      /* 100ms */
130         /* some laptops are very slow */
131         WAIT_READY      = 5 * HZ,       /* 5s */
132         /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
133         WAIT_PIDENTIFY  = 10 * HZ,      /* 10s */
134         /* worst case when spinning up */
135         WAIT_WORSTCASE  = 30 * HZ,      /* 30s */
136         /* maximum wait for an IRQ to happen */
137         WAIT_CMD        = 10 * HZ,      /* 10s */
138         /* Some drives require a longer IRQ timeout. */
139         WAIT_FLOPPY_CMD = 50 * HZ,      /* 50s */
140         /*
141          * Some drives (for example, Seagate STT3401A Travan) require a very
142          * long timeout, because they don't return an interrupt or clear their
143          * BSY bit until after the command completes (even retension commands).
144          */
145         WAIT_TAPE_CMD   = 900 * HZ,     /* 900s */
146         /* minimum sleep time */
147         WAIT_MIN_SLEEP  = HZ / 50,      /* 20ms */
148 };
149
150 /*
151  * Op codes for special requests to be handled by ide_special_rq().
152  * Values should be in the range of 0x20 to 0x3f.
153  */
154 #define REQ_DRIVE_RESET         0x20
155 #define REQ_DEVSET_EXEC         0x21
156 #define REQ_PARK_HEADS          0x22
157 #define REQ_UNPARK_HEADS        0x23
158
159 /*
160  * Check for an interrupt and acknowledge the interrupt status
161  */
162 struct hwif_s;
163 typedef int (ide_ack_intr_t)(struct hwif_s *);
164
165 /*
166  * hwif_chipset_t is used to keep track of the specific hardware
167  * chipset used by each IDE interface, if known.
168  */
169 enum {          ide_unknown,    ide_generic,    ide_pci,
170                 ide_cmd640,     ide_dtc2278,    ide_ali14xx,
171                 ide_qd65xx,     ide_umc8672,    ide_ht6560b,
172                 ide_4drives,    ide_pmac,       ide_acorn,
173                 ide_au1xxx,     ide_palm3710
174 };
175
176 typedef u8 hwif_chipset_t;
177
178 /*
179  * Structure to hold all information about the location of this port
180  */
181 typedef struct hw_regs_s {
182         union {
183                 struct ide_io_ports     io_ports;
184                 unsigned long           io_ports_array[IDE_NR_PORTS];
185         };
186
187         int             irq;                    /* our irq number */
188         ide_ack_intr_t  *ack_intr;              /* acknowledge interrupt */
189         hwif_chipset_t  chipset;
190         struct device   *dev, *parent;
191         unsigned long   config;
192 } hw_regs_t;
193
194 static inline void ide_std_init_ports(hw_regs_t *hw,
195                                       unsigned long io_addr,
196                                       unsigned long ctl_addr)
197 {
198         unsigned int i;
199
200         for (i = 0; i <= 7; i++)
201                 hw->io_ports_array[i] = io_addr++;
202
203         hw->io_ports.ctl_addr = ctl_addr;
204 }
205
206 #define MAX_HWIFS       10
207
208 /*
209  * Now for the data we need to maintain per-drive:  ide_drive_t
210  */
211
212 #define ide_scsi        0x21
213 #define ide_disk        0x20
214 #define ide_optical     0x7
215 #define ide_cdrom       0x5
216 #define ide_tape        0x1
217 #define ide_floppy      0x0
218
219 /*
220  * Special Driver Flags
221  *
222  * set_geometry : respecify drive geometry
223  * recalibrate  : seek to cyl 0
224  * set_multmode : set multmode count
225  * reserved     : unused
226  */
227 typedef union {
228         unsigned all                    : 8;
229         struct {
230                 unsigned set_geometry   : 1;
231                 unsigned recalibrate    : 1;
232                 unsigned set_multmode   : 1;
233                 unsigned reserved       : 5;
234         } b;
235 } special_t;
236
237 /*
238  * Status returned from various ide_ functions
239  */
240 typedef enum {
241         ide_stopped,    /* no drive operation was started */
242         ide_started,    /* a drive operation was started, handler was set */
243 } ide_startstop_t;
244
245 enum {
246         IDE_VALID_ERROR                 = (1 << 1),
247         IDE_VALID_FEATURE               = IDE_VALID_ERROR,
248         IDE_VALID_NSECT                 = (1 << 2),
249         IDE_VALID_LBAL                  = (1 << 3),
250         IDE_VALID_LBAM                  = (1 << 4),
251         IDE_VALID_LBAH                  = (1 << 5),
252         IDE_VALID_DEVICE                = (1 << 6),
253         IDE_VALID_LBA                   = IDE_VALID_LBAL |
254                                           IDE_VALID_LBAM |
255                                           IDE_VALID_LBAH,
256         IDE_VALID_OUT_TF                = IDE_VALID_FEATURE |
257                                           IDE_VALID_NSECT |
258                                           IDE_VALID_LBA,
259         IDE_VALID_IN_TF                 = IDE_VALID_NSECT |
260                                           IDE_VALID_LBA,
261         IDE_VALID_OUT_HOB               = IDE_VALID_OUT_TF,
262         IDE_VALID_IN_HOB                = IDE_VALID_ERROR |
263                                           IDE_VALID_NSECT |
264                                           IDE_VALID_LBA,
265 };
266
267 enum {
268         IDE_TFLAG_LBA48                 = (1 << 0),
269         IDE_TFLAG_WRITE                 = (1 << 1),
270         IDE_TFLAG_CUSTOM_HANDLER        = (1 << 2),
271         IDE_TFLAG_DMA_PIO_FALLBACK      = (1 << 3),
272         /* force 16-bit I/O operations */
273         IDE_TFLAG_IO_16BIT              = (1 << 4),
274         /* struct ide_cmd was allocated using kmalloc() */
275         IDE_TFLAG_DYN                   = (1 << 5),
276         IDE_TFLAG_FS                    = (1 << 6),
277         IDE_TFLAG_MULTI_PIO             = (1 << 7),
278 };
279
280 enum {
281         IDE_FTFLAG_FLAGGED              = (1 << 0),
282         IDE_FTFLAG_SET_IN_FLAGS         = (1 << 1),
283         IDE_FTFLAG_OUT_DATA             = (1 << 2),
284         IDE_FTFLAG_IN_DATA              = (1 << 3),
285 };
286
287 struct ide_taskfile {
288         u8      data;           /* 0: data byte (for TASKFILE ioctl) */
289         union {                 /* 1: */
290                 u8 error;       /*  read: error */
291                 u8 feature;     /* write: feature */
292         };
293         u8      nsect;          /* 2: number of sectors */
294         u8      lbal;           /* 3: LBA low */
295         u8      lbam;           /* 4: LBA mid */
296         u8      lbah;           /* 5: LBA high */
297         u8      device;         /* 6: device select */
298         union {                 /* 7: */
299                 u8 status;      /*  read: status */
300                 u8 command;     /* write: command */
301         };
302 };
303
304 struct ide_cmd {
305         struct ide_taskfile     tf;
306         struct ide_taskfile     hob;
307         struct {
308                 struct {
309                         u8              tf;
310                         u8              hob;
311                 } out, in;
312         } valid;
313
314         u8                      tf_flags;
315         u8                      ftf_flags;      /* for TASKFILE ioctl */
316         int                     protocol;
317
318         int                     sg_nents;         /* number of sg entries */
319         int                     orig_sg_nents;
320         int                     sg_dma_direction; /* DMA transfer direction */
321
322         unsigned int            nbytes;
323         unsigned int            nleft;
324         unsigned int            last_xfer_len;
325
326         struct scatterlist      *cursg;
327         unsigned int            cursg_ofs;
328
329         struct request          *rq;            /* copy of request */
330 };
331
332 /* ATAPI packet command flags */
333 enum {
334         /* set when an error is considered normal - no retry (ide-tape) */
335         PC_FLAG_ABORT                   = (1 << 0),
336         PC_FLAG_SUPPRESS_ERROR          = (1 << 1),
337         PC_FLAG_WAIT_FOR_DSC            = (1 << 2),
338         PC_FLAG_DMA_OK                  = (1 << 3),
339         PC_FLAG_DMA_IN_PROGRESS         = (1 << 4),
340         PC_FLAG_DMA_ERROR               = (1 << 5),
341         PC_FLAG_WRITING                 = (1 << 6),
342 };
343
344 #define ATAPI_WAIT_PC           (60 * HZ)
345
346 struct ide_atapi_pc {
347         /* actual packet bytes */
348         u8 c[12];
349         /* incremented on each retry */
350         int retries;
351         int error;
352
353         /* bytes to transfer */
354         int req_xfer;
355
356         /* the corresponding request */
357         struct request *rq;
358
359         unsigned long flags;
360
361         /*
362          * those are more or less driver-specific and some of them are subject
363          * to change/removal later.
364          */
365         unsigned long timeout;
366 };
367
368 struct ide_devset;
369 struct ide_driver;
370
371 #ifdef CONFIG_BLK_DEV_IDEACPI
372 struct ide_acpi_drive_link;
373 struct ide_acpi_hwif_link;
374 #endif
375
376 struct ide_drive_s;
377
378 struct ide_disk_ops {
379         int             (*check)(struct ide_drive_s *, const char *);
380         int             (*get_capacity)(struct ide_drive_s *);
381         void            (*setup)(struct ide_drive_s *);
382         void            (*flush)(struct ide_drive_s *);
383         int             (*init_media)(struct ide_drive_s *, struct gendisk *);
384         int             (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
385                                         int);
386         ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
387                                       sector_t);
388         int             (*ioctl)(struct ide_drive_s *, struct block_device *,
389                                  fmode_t, unsigned int, unsigned long);
390 };
391
392 /* ATAPI device flags */
393 enum {
394         IDE_AFLAG_DRQ_INTERRUPT         = (1 << 0),
395
396         /* ide-cd */
397         /* Drive cannot eject the disc. */
398         IDE_AFLAG_NO_EJECT              = (1 << 1),
399         /* Drive is a pre ATAPI 1.2 drive. */
400         IDE_AFLAG_PRE_ATAPI12           = (1 << 2),
401         /* TOC addresses are in BCD. */
402         IDE_AFLAG_TOCADDR_AS_BCD        = (1 << 3),
403         /* TOC track numbers are in BCD. */
404         IDE_AFLAG_TOCTRACKS_AS_BCD      = (1 << 4),
405         /* Saved TOC information is current. */
406         IDE_AFLAG_TOC_VALID             = (1 << 6),
407         /* We think that the drive door is locked. */
408         IDE_AFLAG_DOOR_LOCKED           = (1 << 7),
409         /* SET_CD_SPEED command is unsupported. */
410         IDE_AFLAG_NO_SPEED_SELECT       = (1 << 8),
411         IDE_AFLAG_VERTOS_300_SSD        = (1 << 9),
412         IDE_AFLAG_VERTOS_600_ESD        = (1 << 10),
413         IDE_AFLAG_SANYO_3CD             = (1 << 11),
414         IDE_AFLAG_FULL_CAPS_PAGE        = (1 << 12),
415         IDE_AFLAG_PLAY_AUDIO_OK         = (1 << 13),
416         IDE_AFLAG_LE_SPEED_FIELDS       = (1 << 14),
417
418         /* ide-floppy */
419         /* Avoid commands not supported in Clik drive */
420         IDE_AFLAG_CLIK_DRIVE            = (1 << 15),
421         /* Requires BH algorithm for packets */
422         IDE_AFLAG_ZIP_DRIVE             = (1 << 16),
423         /* Supports format progress report */
424         IDE_AFLAG_SRFP                  = (1 << 17),
425
426         /* ide-tape */
427         IDE_AFLAG_IGNORE_DSC            = (1 << 18),
428         /* 0 When the tape position is unknown */
429         IDE_AFLAG_ADDRESS_VALID         = (1 << 19),
430         /* Device already opened */
431         IDE_AFLAG_BUSY                  = (1 << 20),
432         /* Attempt to auto-detect the current user block size */
433         IDE_AFLAG_DETECT_BS             = (1 << 21),
434         /* Currently on a filemark */
435         IDE_AFLAG_FILEMARK              = (1 << 22),
436         /* 0 = no tape is loaded, so we don't rewind after ejecting */
437         IDE_AFLAG_MEDIUM_PRESENT        = (1 << 23),
438
439         IDE_AFLAG_NO_AUTOCLOSE          = (1 << 24),
440 };
441
442 /* device flags */
443 enum {
444         /* restore settings after device reset */
445         IDE_DFLAG_KEEP_SETTINGS         = (1 << 0),
446         /* device is using DMA for read/write */
447         IDE_DFLAG_USING_DMA             = (1 << 1),
448         /* okay to unmask other IRQs */
449         IDE_DFLAG_UNMASK                = (1 << 2),
450         /* don't attempt flushes */
451         IDE_DFLAG_NOFLUSH               = (1 << 3),
452         /* DSC overlap */
453         IDE_DFLAG_DSC_OVERLAP           = (1 << 4),
454         /* give potential excess bandwidth */
455         IDE_DFLAG_NICE1                 = (1 << 5),
456         /* device is physically present */
457         IDE_DFLAG_PRESENT               = (1 << 6),
458         /* id read from device (synthetic if not set) */
459         IDE_DFLAG_ID_READ               = (1 << 8),
460         IDE_DFLAG_NOPROBE               = (1 << 9),
461         /* need to do check_media_change() */
462         IDE_DFLAG_REMOVABLE             = (1 << 10),
463         /* needed for removable devices */
464         IDE_DFLAG_ATTACH                = (1 << 11),
465         IDE_DFLAG_FORCED_GEOM           = (1 << 12),
466         /* disallow setting unmask bit */
467         IDE_DFLAG_NO_UNMASK             = (1 << 13),
468         /* disallow enabling 32-bit I/O */
469         IDE_DFLAG_NO_IO_32BIT           = (1 << 14),
470         /* for removable only: door lock/unlock works */
471         IDE_DFLAG_DOORLOCKING           = (1 << 15),
472         /* disallow DMA */
473         IDE_DFLAG_NODMA                 = (1 << 16),
474         /* powermanagment told us not to do anything, so sleep nicely */
475         IDE_DFLAG_BLOCKED               = (1 << 17),
476         /* sleeping & sleep field valid */
477         IDE_DFLAG_SLEEPING              = (1 << 18),
478         IDE_DFLAG_POST_RESET            = (1 << 19),
479         IDE_DFLAG_UDMA33_WARNED         = (1 << 20),
480         IDE_DFLAG_LBA48                 = (1 << 21),
481         /* status of write cache */
482         IDE_DFLAG_WCACHE                = (1 << 22),
483         /* used for ignoring ATA_DF */
484         IDE_DFLAG_NOWERR                = (1 << 23),
485         /* retrying in PIO */
486         IDE_DFLAG_DMA_PIO_RETRY         = (1 << 24),
487         IDE_DFLAG_LBA                   = (1 << 25),
488         /* don't unload heads */
489         IDE_DFLAG_NO_UNLOAD             = (1 << 26),
490         /* heads unloaded, please don't reset port */
491         IDE_DFLAG_PARKED                = (1 << 27),
492         IDE_DFLAG_MEDIA_CHANGED         = (1 << 28),
493         /* write protect */
494         IDE_DFLAG_WP                    = (1 << 29),
495         IDE_DFLAG_FORMAT_IN_PROGRESS    = (1 << 30),
496 };
497
498 struct ide_drive_s {
499         char            name[4];        /* drive name, such as "hda" */
500         char            driver_req[10]; /* requests specific driver */
501
502         struct request_queue    *queue; /* request queue */
503
504         struct request          *rq;    /* current request */
505         void            *driver_data;   /* extra driver data */
506         u16                     *id;    /* identification info */
507 #ifdef CONFIG_IDE_PROC_FS
508         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
509         const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
510 #endif
511         struct hwif_s           *hwif;  /* actually (ide_hwif_t *) */
512
513         const struct ide_disk_ops *disk_ops;
514
515         unsigned long dev_flags;
516
517         unsigned long sleep;            /* sleep until this time */
518         unsigned long timeout;          /* max time to wait for irq */
519
520         special_t       special;        /* special action flags */
521
522         u8      select;                 /* basic drive/head select reg value */
523         u8      retry_pio;              /* retrying dma capable host in pio */
524         u8      waiting_for_dma;        /* dma currently in progress */
525         u8      dma;                    /* atapi dma flag */
526
527         u8      quirk_list;     /* considered quirky, set for a specific host */
528         u8      init_speed;     /* transfer rate set at boot */
529         u8      current_speed;  /* current transfer rate set */
530         u8      desired_speed;  /* desired transfer rate set */
531         u8      dn;             /* now wide spread use */
532         u8      acoustic;       /* acoustic management */
533         u8      media;          /* disk, cdrom, tape, floppy, ... */
534         u8      ready_stat;     /* min status value for drive ready */
535         u8      mult_count;     /* current multiple sector setting */
536         u8      mult_req;       /* requested multiple sector setting */
537         u8      io_32bit;       /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
538         u8      bad_wstat;      /* used for ignoring ATA_DF */
539         u8      head;           /* "real" number of heads */
540         u8      sect;           /* "real" sectors per track */
541         u8      bios_head;      /* BIOS/fdisk/LILO number of heads */
542         u8      bios_sect;      /* BIOS/fdisk/LILO sectors per track */
543
544         /* delay this long before sending packet command */
545         u8 pc_delay;
546
547         unsigned int    bios_cyl;       /* BIOS/fdisk/LILO number of cyls */
548         unsigned int    cyl;            /* "real" number of cyls */
549         unsigned int    drive_data;     /* used by set_pio_mode/dev_select() */
550         unsigned int    failures;       /* current failure count */
551         unsigned int    max_failures;   /* maximum allowed failure count */
552         u64             probed_capacity;/* initial reported media capacity (ide-cd only currently) */
553
554         u64             capacity64;     /* total number of sectors */
555
556         int             lun;            /* logical unit */
557         int             crc_count;      /* crc counter to reduce drive speed */
558
559         unsigned long   debug_mask;     /* debugging levels switch */
560
561 #ifdef CONFIG_BLK_DEV_IDEACPI
562         struct ide_acpi_drive_link *acpidata;
563 #endif
564         struct list_head list;
565         struct device   gendev;
566         struct completion gendev_rel_comp;      /* to deal with device release() */
567
568         /* current packet command */
569         struct ide_atapi_pc *pc;
570
571         /* last failed packet command */
572         struct ide_atapi_pc *failed_pc;
573
574         /* callback for packet commands */
575         int  (*pc_callback)(struct ide_drive_s *, int);
576
577         ide_startstop_t (*irq_handler)(struct ide_drive_s *);
578
579         unsigned long atapi_flags;
580
581         struct ide_atapi_pc request_sense_pc;
582
583         /* current sense rq and buffer */
584         bool sense_rq_armed;
585         struct request sense_rq;
586         struct request_sense sense_data;
587 };
588
589 typedef struct ide_drive_s ide_drive_t;
590
591 #define to_ide_device(dev)              container_of(dev, ide_drive_t, gendev)
592
593 #define to_ide_drv(obj, cont_type)      \
594         container_of(obj, struct cont_type, dev)
595
596 #define ide_drv_g(disk, cont_type)      \
597         container_of((disk)->private_data, struct cont_type, driver)
598
599 struct ide_port_info;
600
601 struct ide_tp_ops {
602         void    (*exec_command)(struct hwif_s *, u8);
603         u8      (*read_status)(struct hwif_s *);
604         u8      (*read_altstatus)(struct hwif_s *);
605         void    (*write_devctl)(struct hwif_s *, u8);
606
607         void    (*dev_select)(ide_drive_t *);
608         void    (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
609         void    (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
610
611         void    (*input_data)(ide_drive_t *, struct ide_cmd *,
612                               void *, unsigned int);
613         void    (*output_data)(ide_drive_t *, struct ide_cmd *,
614                                void *, unsigned int);
615 };
616
617 extern const struct ide_tp_ops default_tp_ops;
618
619 /**
620  * struct ide_port_ops - IDE port operations
621  *
622  * @init_dev:           host specific initialization of a device
623  * @set_pio_mode:       routine to program host for PIO mode
624  * @set_dma_mode:       routine to program host for DMA mode
625  * @reset_poll:         chipset polling based on hba specifics
626  * @pre_reset:          chipset specific changes to default for device-hba resets
627  * @resetproc:          routine to reset controller after a disk reset
628  * @maskproc:           special host masking for drive selection
629  * @quirkproc:          check host's drive quirk list
630  * @clear_irq:          clear IRQ
631  *
632  * @mdma_filter:        filter MDMA modes
633  * @udma_filter:        filter UDMA modes
634  *
635  * @cable_detect:       detect cable type
636  */
637 struct ide_port_ops {
638         void    (*init_dev)(ide_drive_t *);
639         void    (*set_pio_mode)(ide_drive_t *, const u8);
640         void    (*set_dma_mode)(ide_drive_t *, const u8);
641         int     (*reset_poll)(ide_drive_t *);
642         void    (*pre_reset)(ide_drive_t *);
643         void    (*resetproc)(ide_drive_t *);
644         void    (*maskproc)(ide_drive_t *, int);
645         void    (*quirkproc)(ide_drive_t *);
646         void    (*clear_irq)(ide_drive_t *);
647
648         u8      (*mdma_filter)(ide_drive_t *);
649         u8      (*udma_filter)(ide_drive_t *);
650
651         u8      (*cable_detect)(struct hwif_s *);
652 };
653
654 struct ide_dma_ops {
655         void    (*dma_host_set)(struct ide_drive_s *, int);
656         int     (*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
657         void    (*dma_start)(struct ide_drive_s *);
658         int     (*dma_end)(struct ide_drive_s *);
659         int     (*dma_test_irq)(struct ide_drive_s *);
660         void    (*dma_lost_irq)(struct ide_drive_s *);
661         /* below ones are optional */
662         int     (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
663         int     (*dma_timer_expiry)(struct ide_drive_s *);
664         void    (*dma_clear)(struct ide_drive_s *);
665         /*
666          * The following method is optional and only required to be
667          * implemented for the SFF-8038i compatible controllers.
668          */
669         u8      (*dma_sff_read_status)(struct hwif_s *);
670 };
671
672 struct ide_host;
673
674 typedef struct hwif_s {
675         struct hwif_s *mate;            /* other hwif from same PCI chip */
676         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
677
678         struct ide_host *host;
679
680         char name[6];                   /* name of interface, eg. "ide0" */
681
682         struct ide_io_ports     io_ports;
683
684         unsigned long   sata_scr[SATA_NR_PORTS];
685
686         ide_drive_t     *devices[MAX_DRIVES + 1];
687
688         u8 major;       /* our major number */
689         u8 index;       /* 0 for ide0; 1 for ide1; ... */
690         u8 channel;     /* for dual-port chips: 0=primary, 1=secondary */
691
692         u32 host_flags;
693
694         u8 pio_mask;
695
696         u8 ultra_mask;
697         u8 mwdma_mask;
698         u8 swdma_mask;
699
700         u8 cbl;         /* cable type */
701
702         hwif_chipset_t chipset; /* sub-module for tuning.. */
703
704         struct device *dev;
705
706         ide_ack_intr_t *ack_intr;
707
708         void (*rw_disk)(ide_drive_t *, struct request *);
709
710         const struct ide_tp_ops         *tp_ops;
711         const struct ide_port_ops       *port_ops;
712         const struct ide_dma_ops        *dma_ops;
713
714         /* dma physical region descriptor table (cpu view) */
715         unsigned int    *dmatable_cpu;
716         /* dma physical region descriptor table (dma view) */
717         dma_addr_t      dmatable_dma;
718
719         /* maximum number of PRD table entries */
720         int prd_max_nents;
721         /* PRD entry size in bytes */
722         int prd_ent_size;
723
724         /* Scatter-gather list used to build the above */
725         struct scatterlist *sg_table;
726         int sg_max_nents;               /* Maximum number of entries in it */
727
728         struct ide_cmd cmd;             /* current command */
729
730         int             rqsize;         /* max sectors per request */
731         int             irq;            /* our irq number */
732
733         unsigned long   dma_base;       /* base addr for dma ports */
734
735         unsigned long   config_data;    /* for use by chipset-specific code */
736         unsigned long   select_data;    /* for use by chipset-specific code */
737
738         unsigned long   extra_base;     /* extra addr for dma ports */
739         unsigned        extra_ports;    /* number of extra dma ports */
740
741         unsigned        present    : 1; /* this interface exists */
742         unsigned        busy       : 1; /* serializes devices on a port */
743
744         struct device           gendev;
745         struct device           *portdev;
746
747         struct completion gendev_rel_comp; /* To deal with device release() */
748
749         void            *hwif_data;     /* extra hwif data */
750
751 #ifdef CONFIG_BLK_DEV_IDEACPI
752         struct ide_acpi_hwif_link *acpidata;
753 #endif
754
755         /* IRQ handler, if active */
756         ide_startstop_t (*handler)(ide_drive_t *);
757
758         /* BOOL: polling active & poll_timeout field valid */
759         unsigned int polling : 1;
760
761         /* current drive */
762         ide_drive_t *cur_dev;
763
764         /* current request */
765         struct request *rq;
766
767         /* failsafe timer */
768         struct timer_list timer;
769         /* timeout value during long polls */
770         unsigned long poll_timeout;
771         /* queried upon timeouts */
772         int (*expiry)(ide_drive_t *);
773
774         int req_gen;
775         int req_gen_timer;
776
777         spinlock_t lock;
778 } ____cacheline_internodealigned_in_smp ide_hwif_t;
779
780 #define MAX_HOST_PORTS 4
781
782 struct ide_host {
783         ide_hwif_t      *ports[MAX_HOST_PORTS + 1];
784         unsigned int    n_ports;
785         struct device   *dev[2];
786
787         int             (*init_chipset)(struct pci_dev *);
788
789         void            (*get_lock)(irq_handler_t, void *);
790         void            (*release_lock)(void);
791
792         irq_handler_t   irq_handler;
793
794         unsigned long   host_flags;
795
796         int             irq_flags;
797
798         void            *host_priv;
799         ide_hwif_t      *cur_port;      /* for hosts requiring serialization */
800
801         /* used for hosts requiring serialization */
802         volatile unsigned long  host_busy;
803 };
804
805 #define IDE_HOST_BUSY 0
806
807 /*
808  *  internal ide interrupt handler type
809  */
810 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
811 typedef int (ide_expiry_t)(ide_drive_t *);
812
813 /* used by ide-cd, ide-floppy, etc. */
814 typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
815
816 extern struct mutex ide_setting_mtx;
817
818 /*
819  * configurable drive settings
820  */
821
822 #define DS_SYNC (1 << 0)
823
824 struct ide_devset {
825         int             (*get)(ide_drive_t *);
826         int             (*set)(ide_drive_t *, int);
827         unsigned int    flags;
828 };
829
830 #define __DEVSET(_flags, _get, _set) { \
831         .flags  = _flags, \
832         .get    = _get, \
833         .set    = _set, \
834 }
835
836 #define ide_devset_get(name, field) \
837 static int get_##name(ide_drive_t *drive) \
838 { \
839         return drive->field; \
840 }
841
842 #define ide_devset_set(name, field) \
843 static int set_##name(ide_drive_t *drive, int arg) \
844 { \
845         drive->field = arg; \
846         return 0; \
847 }
848
849 #define ide_devset_get_flag(name, flag) \
850 static int get_##name(ide_drive_t *drive) \
851 { \
852         return !!(drive->dev_flags & flag); \
853 }
854
855 #define ide_devset_set_flag(name, flag) \
856 static int set_##name(ide_drive_t *drive, int arg) \
857 { \
858         if (arg) \
859                 drive->dev_flags |= flag; \
860         else \
861                 drive->dev_flags &= ~flag; \
862         return 0; \
863 }
864
865 #define __IDE_DEVSET(_name, _flags, _get, _set) \
866 const struct ide_devset ide_devset_##_name = \
867         __DEVSET(_flags, _get, _set)
868
869 #define IDE_DEVSET(_name, _flags, _get, _set) \
870 static __IDE_DEVSET(_name, _flags, _get, _set)
871
872 #define ide_devset_rw(_name, _func) \
873 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
874
875 #define ide_devset_w(_name, _func) \
876 IDE_DEVSET(_name, 0, NULL, set_##_func)
877
878 #define ide_ext_devset_rw(_name, _func) \
879 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
880
881 #define ide_ext_devset_rw_sync(_name, _func) \
882 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
883
884 #define ide_decl_devset(_name) \
885 extern const struct ide_devset ide_devset_##_name
886
887 ide_decl_devset(io_32bit);
888 ide_decl_devset(keepsettings);
889 ide_decl_devset(pio_mode);
890 ide_decl_devset(unmaskirq);
891 ide_decl_devset(using_dma);
892
893 #ifdef CONFIG_IDE_PROC_FS
894 /*
895  * /proc/ide interface
896  */
897
898 #define ide_devset_rw_field(_name, _field) \
899 ide_devset_get(_name, _field); \
900 ide_devset_set(_name, _field); \
901 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
902
903 #define ide_devset_rw_flag(_name, _field) \
904 ide_devset_get_flag(_name, _field); \
905 ide_devset_set_flag(_name, _field); \
906 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
907
908 struct ide_proc_devset {
909         const char              *name;
910         const struct ide_devset *setting;
911         int                     min, max;
912         int                     (*mulf)(ide_drive_t *);
913         int                     (*divf)(ide_drive_t *);
914 };
915
916 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
917         .name = __stringify(_name), \
918         .setting = &ide_devset_##_name, \
919         .min = _min, \
920         .max = _max, \
921         .mulf = _mulf, \
922         .divf = _divf, \
923 }
924
925 #define IDE_PROC_DEVSET(_name, _min, _max) \
926 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
927
928 typedef struct {
929         const char      *name;
930         mode_t          mode;
931         read_proc_t     *read_proc;
932         write_proc_t    *write_proc;
933 } ide_proc_entry_t;
934
935 void proc_ide_create(void);
936 void proc_ide_destroy(void);
937 void ide_proc_register_port(ide_hwif_t *);
938 void ide_proc_port_register_devices(ide_hwif_t *);
939 void ide_proc_unregister_device(ide_drive_t *);
940 void ide_proc_unregister_port(ide_hwif_t *);
941 void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
942 void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
943
944 read_proc_t proc_ide_read_capacity;
945 read_proc_t proc_ide_read_geometry;
946
947 /*
948  * Standard exit stuff:
949  */
950 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
951 {                                       \
952         len -= off;                     \
953         if (len < count) {              \
954                 *eof = 1;               \
955                 if (len <= 0)           \
956                         return 0;       \
957         } else                          \
958                 len = count;            \
959         *start = page + off;            \
960         return len;                     \
961 }
962 #else
963 static inline void proc_ide_create(void) { ; }
964 static inline void proc_ide_destroy(void) { ; }
965 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
966 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
967 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
968 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
969 static inline void ide_proc_register_driver(ide_drive_t *drive,
970                                             struct ide_driver *driver) { ; }
971 static inline void ide_proc_unregister_driver(ide_drive_t *drive,
972                                               struct ide_driver *driver) { ; }
973 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
974 #endif
975
976 enum {
977         /* enter/exit functions */
978         IDE_DBG_FUNC =                  (1 << 0),
979         /* sense key/asc handling */
980         IDE_DBG_SENSE =                 (1 << 1),
981         /* packet commands handling */
982         IDE_DBG_PC =                    (1 << 2),
983         /* request handling */
984         IDE_DBG_RQ =                    (1 << 3),
985         /* driver probing/setup */
986         IDE_DBG_PROBE =                 (1 << 4),
987 };
988
989 /* DRV_NAME has to be defined in the driver before using the macro below */
990 #define __ide_debug_log(lvl, fmt, args...)                              \
991 {                                                                       \
992         if (unlikely(drive->debug_mask & lvl))                          \
993                 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",            \
994                                           __func__, ## args);           \
995 }
996
997 /*
998  * Power Management state machine (rq->pm->pm_step).
999  *
1000  * For each step, the core calls ide_start_power_step() first.
1001  * This can return:
1002  *      - ide_stopped : In this case, the core calls us back again unless
1003  *                      step have been set to ide_power_state_completed.
1004  *      - ide_started : In this case, the channel is left busy until an
1005  *                      async event (interrupt) occurs.
1006  * Typically, ide_start_power_step() will issue a taskfile request with
1007  * do_rw_taskfile().
1008  *
1009  * Upon reception of the interrupt, the core will call ide_complete_power_step()
1010  * with the error code if any. This routine should update the step value
1011  * and return. It should not start a new request. The core will call
1012  * ide_start_power_step() for the new step value, unless step have been
1013  * set to IDE_PM_COMPLETED.
1014  */
1015 enum {
1016         IDE_PM_START_SUSPEND,
1017         IDE_PM_FLUSH_CACHE      = IDE_PM_START_SUSPEND,
1018         IDE_PM_STANDBY,
1019
1020         IDE_PM_START_RESUME,
1021         IDE_PM_RESTORE_PIO      = IDE_PM_START_RESUME,
1022         IDE_PM_IDLE,
1023         IDE_PM_RESTORE_DMA,
1024
1025         IDE_PM_COMPLETED,
1026 };
1027
1028 int generic_ide_suspend(struct device *, pm_message_t);
1029 int generic_ide_resume(struct device *);
1030
1031 void ide_complete_power_step(ide_drive_t *, struct request *);
1032 ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
1033 void ide_complete_pm_rq(ide_drive_t *, struct request *);
1034 void ide_check_pm_state(ide_drive_t *, struct request *);
1035
1036 /*
1037  * Subdrivers support.
1038  *
1039  * The gendriver.owner field should be set to the module owner of this driver.
1040  * The gendriver.name field should be set to the name of this driver
1041  */
1042 struct ide_driver {
1043         const char                      *version;
1044         ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1045         struct device_driver    gen_driver;
1046         int             (*probe)(ide_drive_t *);
1047         void            (*remove)(ide_drive_t *);
1048         void            (*resume)(ide_drive_t *);
1049         void            (*shutdown)(ide_drive_t *);
1050 #ifdef CONFIG_IDE_PROC_FS
1051         ide_proc_entry_t *              (*proc_entries)(ide_drive_t *);
1052         const struct ide_proc_devset *  (*proc_devsets)(ide_drive_t *);
1053 #endif
1054 };
1055
1056 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1057
1058 int ide_device_get(ide_drive_t *);
1059 void ide_device_put(ide_drive_t *);
1060
1061 struct ide_ioctl_devset {
1062         unsigned int    get_ioctl;
1063         unsigned int    set_ioctl;
1064         const struct ide_devset *setting;
1065 };
1066
1067 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
1068                       unsigned long, const struct ide_ioctl_devset *);
1069
1070 int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
1071
1072 extern int ide_vlb_clk;
1073 extern int ide_pci_clk;
1074
1075 unsigned int ide_rq_bytes(struct request *);
1076 int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
1077 void ide_kill_rq(ide_drive_t *, struct request *);
1078
1079 void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1080 void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
1081
1082 void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
1083                          unsigned int);
1084
1085 void ide_pad_transfer(ide_drive_t *, int, int);
1086
1087 ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
1088
1089 void ide_fix_driveid(u16 *);
1090
1091 extern void ide_fixstring(u8 *, const int, const int);
1092
1093 int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
1094
1095 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1096
1097 ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
1098 ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
1099
1100 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1101
1102 extern int ide_devset_execute(ide_drive_t *drive,
1103                               const struct ide_devset *setting, int arg);
1104
1105 void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
1106 int ide_complete_rq(ide_drive_t *, int, unsigned int);
1107
1108 void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
1109 void ide_tf_dump(const char *, struct ide_cmd *);
1110
1111 void ide_exec_command(ide_hwif_t *, u8);
1112 u8 ide_read_status(ide_hwif_t *);
1113 u8 ide_read_altstatus(ide_hwif_t *);
1114 void ide_write_devctl(ide_hwif_t *, u8);
1115
1116 void ide_dev_select(ide_drive_t *);
1117 void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
1118 void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
1119
1120 void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1121 void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
1122
1123 void SELECT_MASK(ide_drive_t *, int);
1124
1125 u8 ide_read_error(ide_drive_t *);
1126 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1127
1128 int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
1129
1130 int ide_check_atapi_device(ide_drive_t *, const char *);
1131
1132 void ide_init_pc(struct ide_atapi_pc *);
1133
1134 /* Disk head parking */
1135 extern wait_queue_head_t ide_park_wq;
1136 ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
1137                       char *buf);
1138 ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
1139                        const char *buf, size_t len);
1140
1141 /*
1142  * Special requests for ide-tape block device strategy routine.
1143  *
1144  * In order to service a character device command, we add special requests to
1145  * the tail of our block device request queue and wait for their completion.
1146  */
1147 enum {
1148         REQ_IDETAPE_PC1         = (1 << 0), /* packet command (first stage) */
1149         REQ_IDETAPE_PC2         = (1 << 1), /* packet command (second stage) */
1150         REQ_IDETAPE_READ        = (1 << 2),
1151         REQ_IDETAPE_WRITE       = (1 << 3),
1152 };
1153
1154 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
1155                       void *, unsigned int);
1156
1157 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
1158 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
1159 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
1160 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
1161 void ide_retry_pc(ide_drive_t *drive);
1162
1163 void ide_prep_sense(ide_drive_t *drive, struct request *rq);
1164 int ide_queue_sense_rq(ide_drive_t *drive, void *special);
1165
1166 int ide_cd_expiry(ide_drive_t *);
1167
1168 int ide_cd_get_xferlen(struct request *);
1169
1170 ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
1171
1172 ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
1173
1174 void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
1175
1176 void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
1177
1178 int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
1179 int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
1180
1181 int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
1182
1183 int ide_dev_read_id(ide_drive_t *, u8, u16 *);
1184
1185 extern int ide_driveid_update(ide_drive_t *);
1186 extern int ide_config_drive_speed(ide_drive_t *, u8);
1187 extern u8 eighty_ninty_three (ide_drive_t *);
1188 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1189
1190 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1191
1192 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1193
1194 extern void ide_timer_expiry(unsigned long);
1195 extern irqreturn_t ide_intr(int irq, void *dev_id);
1196 extern void do_ide_request(struct request_queue *);
1197
1198 void ide_init_disk(struct gendisk *, ide_drive_t *);
1199
1200 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1201 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1202 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1203 #else
1204 #define ide_pci_register_driver(d) pci_register_driver(d)
1205 #endif
1206
1207 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
1208 {
1209         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
1210                 return 1;
1211         return 0;
1212 }
1213
1214 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
1215                          hw_regs_t *, hw_regs_t **);
1216 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1217
1218 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1219 int ide_pci_set_master(struct pci_dev *, const char *);
1220 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1221 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1222 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1223 #else
1224 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1225                                      const struct ide_port_info *d)
1226 {
1227         return -EINVAL;
1228 }
1229 #endif
1230
1231 struct ide_pci_enablebit {
1232         u8      reg;    /* byte pci reg holding the enable-bit */
1233         u8      mask;   /* mask to isolate the enable-bit */
1234         u8      val;    /* value of masked reg when "enabled" */
1235 };
1236
1237 enum {
1238         /* Uses ISA control ports not PCI ones. */
1239         IDE_HFLAG_ISA_PORTS             = (1 << 0),
1240         /* single port device */
1241         IDE_HFLAG_SINGLE                = (1 << 1),
1242         /* don't use legacy PIO blacklist */
1243         IDE_HFLAG_PIO_NO_BLACKLIST      = (1 << 2),
1244         /* set for the second port of QD65xx */
1245         IDE_HFLAG_QD_2ND_PORT           = (1 << 3),
1246         /* use PIO8/9 for prefetch off/on */
1247         IDE_HFLAG_ABUSE_PREFETCH        = (1 << 4),
1248         /* use PIO6/7 for fast-devsel off/on */
1249         IDE_HFLAG_ABUSE_FAST_DEVSEL     = (1 << 5),
1250         /* use 100-102 and 200-202 PIO values to set DMA modes */
1251         IDE_HFLAG_ABUSE_DMA_MODES       = (1 << 6),
1252         /*
1253          * keep DMA setting when programming PIO mode, may be used only
1254          * for hosts which have separate PIO and DMA timings (ie. PMAC)
1255          */
1256         IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1257         /* program host for the transfer mode after programming device */
1258         IDE_HFLAG_POST_SET_MODE         = (1 << 8),
1259         /* don't program host/device for the transfer mode ("smart" hosts) */
1260         IDE_HFLAG_NO_SET_MODE           = (1 << 9),
1261         /* trust BIOS for programming chipset/device for DMA */
1262         IDE_HFLAG_TRUST_BIOS_FOR_DMA    = (1 << 10),
1263         /* host is CS5510/CS5520 */
1264         IDE_HFLAG_CS5520                = (1 << 11),
1265         /* ATAPI DMA is unsupported */
1266         IDE_HFLAG_NO_ATAPI_DMA          = (1 << 12),
1267         /* set if host is a "non-bootable" controller */
1268         IDE_HFLAG_NON_BOOTABLE          = (1 << 13),
1269         /* host doesn't support DMA */
1270         IDE_HFLAG_NO_DMA                = (1 << 14),
1271         /* check if host is PCI IDE device before allowing DMA */
1272         IDE_HFLAG_NO_AUTODMA            = (1 << 15),
1273         /* host uses MMIO */
1274         IDE_HFLAG_MMIO                  = (1 << 16),
1275         /* no LBA48 */
1276         IDE_HFLAG_NO_LBA48              = (1 << 17),
1277         /* no LBA48 DMA */
1278         IDE_HFLAG_NO_LBA48_DMA          = (1 << 18),
1279         /* data FIFO is cleared by an error */
1280         IDE_HFLAG_ERROR_STOPS_FIFO      = (1 << 19),
1281         /* serialize ports */
1282         IDE_HFLAG_SERIALIZE             = (1 << 20),
1283         /* host is DTC2278 */
1284         IDE_HFLAG_DTC2278               = (1 << 21),
1285         /* 4 devices on a single set of I/O ports */
1286         IDE_HFLAG_4DRIVES               = (1 << 22),
1287         /* host is TRM290 */
1288         IDE_HFLAG_TRM290                = (1 << 23),
1289         /* use 32-bit I/O ops */
1290         IDE_HFLAG_IO_32BIT              = (1 << 24),
1291         /* unmask IRQs */
1292         IDE_HFLAG_UNMASK_IRQS           = (1 << 25),
1293         IDE_HFLAG_BROKEN_ALTSTATUS      = (1 << 26),
1294         /* serialize ports if DMA is possible (for sl82c105) */
1295         IDE_HFLAG_SERIALIZE_DMA         = (1 << 27),
1296         /* force host out of "simplex" mode */
1297         IDE_HFLAG_CLEAR_SIMPLEX         = (1 << 28),
1298         /* DSC overlap is unsupported */
1299         IDE_HFLAG_NO_DSC                = (1 << 29),
1300         /* never use 32-bit I/O ops */
1301         IDE_HFLAG_NO_IO_32BIT           = (1 << 30),
1302         /* never unmask IRQs */
1303         IDE_HFLAG_NO_UNMASK_IRQS        = (1 << 31),
1304 };
1305
1306 #ifdef CONFIG_BLK_DEV_OFFBOARD
1307 # define IDE_HFLAG_OFF_BOARD    0
1308 #else
1309 # define IDE_HFLAG_OFF_BOARD    IDE_HFLAG_NON_BOOTABLE
1310 #endif
1311
1312 struct ide_port_info {
1313         char                    *name;
1314
1315         int                     (*init_chipset)(struct pci_dev *);
1316
1317         void                    (*get_lock)(irq_handler_t, void *);
1318         void                    (*release_lock)(void);
1319
1320         void                    (*init_iops)(ide_hwif_t *);
1321         void                    (*init_hwif)(ide_hwif_t *);
1322         int                     (*init_dma)(ide_hwif_t *,
1323                                             const struct ide_port_info *);
1324
1325         const struct ide_tp_ops         *tp_ops;
1326         const struct ide_port_ops       *port_ops;
1327         const struct ide_dma_ops        *dma_ops;
1328
1329         struct ide_pci_enablebit        enablebits[2];
1330
1331         hwif_chipset_t          chipset;
1332
1333         u16                     max_sectors;    /* if < than the default one */
1334
1335         u32                     host_flags;
1336
1337         int                     irq_flags;
1338
1339         u8                      pio_mask;
1340         u8                      swdma_mask;
1341         u8                      mwdma_mask;
1342         u8                      udma_mask;
1343 };
1344
1345 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1346 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1347                      const struct ide_port_info *, void *);
1348 void ide_pci_remove(struct pci_dev *);
1349
1350 #ifdef CONFIG_PM
1351 int ide_pci_suspend(struct pci_dev *, pm_message_t);
1352 int ide_pci_resume(struct pci_dev *);
1353 #else
1354 #define ide_pci_suspend NULL
1355 #define ide_pci_resume NULL
1356 #endif
1357
1358 void ide_map_sg(ide_drive_t *, struct ide_cmd *);
1359 void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
1360
1361 #define BAD_DMA_DRIVE           0
1362 #define GOOD_DMA_DRIVE          1
1363
1364 struct drive_list_entry {
1365         const char *id_model;
1366         const char *id_firmware;
1367 };
1368
1369 int ide_in_drive_list(u16 *, const struct drive_list_entry *);
1370
1371 #ifdef CONFIG_BLK_DEV_IDEDMA
1372 int ide_dma_good_drive(ide_drive_t *);
1373 int __ide_dma_bad_drive(ide_drive_t *);
1374 int ide_id_dma_bug(ide_drive_t *);
1375
1376 u8 ide_find_dma_mode(ide_drive_t *, u8);
1377
1378 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1379 {
1380         return ide_find_dma_mode(drive, XFER_UDMA_6);
1381 }
1382
1383 void ide_dma_off_quietly(ide_drive_t *);
1384 void ide_dma_off(ide_drive_t *);
1385 void ide_dma_on(ide_drive_t *);
1386 int ide_set_dma(ide_drive_t *);
1387 void ide_check_dma_crc(ide_drive_t *);
1388 ide_startstop_t ide_dma_intr(ide_drive_t *);
1389
1390 int ide_allocate_dma_engine(ide_hwif_t *);
1391 void ide_release_dma_engine(ide_hwif_t *);
1392
1393 int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
1394 void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
1395
1396 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1397 int config_drive_for_dma(ide_drive_t *);
1398 int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
1399 void ide_dma_host_set(ide_drive_t *, int);
1400 int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
1401 extern void ide_dma_start(ide_drive_t *);
1402 int ide_dma_end(ide_drive_t *);
1403 int ide_dma_test_irq(ide_drive_t *);
1404 int ide_dma_sff_timer_expiry(ide_drive_t *);
1405 u8 ide_dma_sff_read_status(ide_hwif_t *);
1406 extern const struct ide_dma_ops sff_dma_ops;
1407 #else
1408 static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
1409 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1410
1411 void ide_dma_lost_irq(ide_drive_t *);
1412 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
1413
1414 #else
1415 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1416 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1417 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1418 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1419 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1420 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1421 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1422 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1423 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1424 static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
1425 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
1426 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1427 static inline int ide_dma_prepare(ide_drive_t *drive,
1428                                   struct ide_cmd *cmd) { return 1; }
1429 static inline void ide_dma_unmap_sg(ide_drive_t *drive,
1430                                     struct ide_cmd *cmd) { ; }
1431 #endif /* CONFIG_BLK_DEV_IDEDMA */
1432
1433 #ifdef CONFIG_BLK_DEV_IDEACPI
1434 int ide_acpi_init(void);
1435 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1436 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1437 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1438 void ide_acpi_init_port(ide_hwif_t *);
1439 void ide_acpi_port_init_devices(ide_hwif_t *);
1440 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1441 #else
1442 static inline int ide_acpi_init(void) { return 0; }
1443 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1444 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1445 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1446 static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
1447 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1448 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1449 #endif
1450
1451 void ide_register_region(struct gendisk *);
1452 void ide_unregister_region(struct gendisk *);
1453
1454 void ide_undecoded_slave(ide_drive_t *);
1455
1456 void ide_port_apply_params(ide_hwif_t *);
1457 int ide_sysfs_register_port(ide_hwif_t *);
1458
1459 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
1460 void ide_host_free(struct ide_host *);
1461 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1462                       hw_regs_t **);
1463 int ide_host_add(const struct ide_port_info *, hw_regs_t **,
1464                  struct ide_host **);
1465 void ide_host_remove(struct ide_host *);
1466 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1467 void ide_port_unregister_devices(ide_hwif_t *);
1468 void ide_port_scan(ide_hwif_t *);
1469
1470 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1471 {
1472         return hwif->hwif_data;
1473 }
1474
1475 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1476 {
1477         hwif->hwif_data = data;
1478 }
1479
1480 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1481
1482 u64 ide_get_lba_addr(struct ide_cmd *, int);
1483 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1484
1485 struct ide_timing {
1486         u8  mode;
1487         u8  setup;      /* t1 */
1488         u16 act8b;      /* t2 for 8-bit io */
1489         u16 rec8b;      /* t2i for 8-bit io */
1490         u16 cyc8b;      /* t0 for 8-bit io */
1491         u16 active;     /* t2 or tD */
1492         u16 recover;    /* t2i or tK */
1493         u16 cycle;      /* t0 */
1494         u16 udma;       /* t2CYCTYP/2 */
1495 };
1496
1497 enum {
1498         IDE_TIMING_SETUP        = (1 << 0),
1499         IDE_TIMING_ACT8B        = (1 << 1),
1500         IDE_TIMING_REC8B        = (1 << 2),
1501         IDE_TIMING_CYC8B        = (1 << 3),
1502         IDE_TIMING_8BIT         = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1503                                   IDE_TIMING_CYC8B,
1504         IDE_TIMING_ACTIVE       = (1 << 4),
1505         IDE_TIMING_RECOVER      = (1 << 5),
1506         IDE_TIMING_CYCLE        = (1 << 6),
1507         IDE_TIMING_UDMA         = (1 << 7),
1508         IDE_TIMING_ALL          = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1509                                   IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1510                                   IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1511 };
1512
1513 struct ide_timing *ide_timing_find_mode(u8);
1514 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1515 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1516                       struct ide_timing *, unsigned int);
1517 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1518
1519 #ifdef CONFIG_IDE_XFER_MODE
1520 int ide_scan_pio_blacklist(char *);
1521 const char *ide_xfer_verbose(u8);
1522 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1523 int ide_set_pio_mode(ide_drive_t *, u8);
1524 int ide_set_dma_mode(ide_drive_t *, u8);
1525 void ide_set_pio(ide_drive_t *, u8);
1526 int ide_set_xfer_rate(ide_drive_t *, u8);
1527 #else
1528 static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
1529 static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
1530 #endif
1531
1532 static inline void ide_set_max_pio(ide_drive_t *drive)
1533 {
1534         ide_set_pio(drive, 255);
1535 }
1536
1537 char *ide_media_string(ide_drive_t *);
1538
1539 extern struct device_attribute ide_dev_attrs[];
1540 extern struct bus_type ide_bus_type;
1541 extern struct class *ide_port_class;
1542
1543 static inline void ide_dump_identify(u8 *id)
1544 {
1545         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1546 }
1547
1548 static inline int hwif_to_node(ide_hwif_t *hwif)
1549 {
1550         return hwif->dev ? dev_to_node(hwif->dev) : -1;
1551 }
1552
1553 static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
1554 {
1555         ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
1556
1557         return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
1558 }
1559
1560 #define ide_port_for_each_dev(i, dev, port) \
1561         for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1562
1563 #define ide_port_for_each_present_dev(i, dev, port) \
1564         for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1565                 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1566
1567 #define ide_host_for_each_port(i, port, host) \
1568         for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
1569
1570 #endif /* _IDE_H */