git.oblomov.eu Git - linux-2.6/blob - drivers/usb/serial/whiteheat.c

   1 /*
   2  * USB ConnectTech WhiteHEAT driver
   3  *
   4  *      Copyright (C) 2002
   5  *          Connect Tech Inc.
   6  *
   7  *      Copyright (C) 1999 - 2001
   8  *          Greg Kroah-Hartman (greg@kroah.com)
   9  *
  10  *      This program is free software; you can redistribute it and/or modify
  11  *      it under the terms of the GNU General Public License as published by
  12  *      the Free Software Foundation; either version 2 of the License, or
  13  *      (at your option) any later version.
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this
  16  * driver
  17  *
  18  * (10/09/2002) Stuart MacDonald (stuartm@connecttech.com)
  19  *      Upgrade to full working driver
  20  *
  21  * (05/30/2001) gkh
  22  *      switched from using spinlock to a semaphore, which fixes lots of
  23  *      problems.
  24  *
  25  * (04/08/2001) gb
  26  *      Identify version on module load.
  27  *
  28  * 2001_Mar_19 gkh
  29  *      Fixed MOD_INC and MOD_DEC logic, the ability to open a port more
  30  *      than once, and the got the proper usb_device_id table entries so
  31  *      the driver works again.
  32  *
  33  * (11/01/2000) Adam J. Richter
  34  *      usb_device_id table support
  35  *
  36  * (10/05/2000) gkh
  37  *      Fixed bug with urb->dev not being set properly, now that the usb
  38  *      core needs it.
  39  *
  40  * (10/03/2000) smd
  41  *      firmware is improved to guard against crap sent to device
  42  *      firmware now replies CMD_FAILURE on bad things
  43  *      read_callback fix you provided for private info struct
  44  *      command_finished now indicates success or fail
  45  *      setup_port struct now packed to avoid gcc padding
  46  *      firmware uses 1 based port numbering, driver now handles that
  47  *
  48  * (09/11/2000) gkh
  49  *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
  50  *
  51  * (07/19/2000) gkh
  52  *      Added module_init and module_exit functions to handle the fact that this
  53  *      driver is a loadable module now.
  54  *      Fixed bug with port->minor that was found by Al Borchers
  55  *
  56  * (07/04/2000) gkh
  57  *      Added support for port settings. Baud rate can now be changed. Line
  58  *      signals are not transferred to and from the tty layer yet, but things
  59  *      seem to be working well now.
  60  *
  61  * (05/04/2000) gkh
  62  *      First cut at open and close commands. Data can flow through the ports at
  63  *      default speeds now.
  64  *
  65  * (03/26/2000) gkh
  66  *      Split driver up into device specific pieces.
  67  *
  68  */
  69
  70 #include <linux/kernel.h>
  71 #include <linux/errno.h>
  72 #include <linux/init.h>
  73 #include <linux/slab.h>
  74 #include <linux/tty.h>
  75 #include <linux/tty_driver.h>
  76 #include <linux/tty_flip.h>
  77 #include <linux/module.h>
  78 #include <linux/spinlock.h>
  79 #include <linux/mutex.h>
  80 #include <linux/uaccess.h>
  81 #include <asm/termbits.h>
  82 #include <linux/usb.h>
  83 #include <linux/serial_reg.h>
  84 #include <linux/serial.h>
  85 #include <linux/usb/serial.h>
  86 #include <linux/firmware.h>
  87 #include <linux/ihex.h>
  88 #include "whiteheat.h"                  /* WhiteHEAT specific commands */
  89
  90 static int debug;
  91
  92 #ifndef CMSPAR
  93 #define CMSPAR 0
  94 #endif
  95
  96 /*
  97  * Version Information
  98  */
  99 #define DRIVER_VERSION "v2.0"
 100 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>"
 101 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
 102
 103 #define CONNECT_TECH_VENDOR_ID          0x0710
 104 #define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001
 105 #define CONNECT_TECH_WHITE_HEAT_ID      0x8001
 106
 107 /*
 108    ID tables for whiteheat are unusual, because we want to different
 109    things for different versions of the device.  Eventually, this
 110    will be doable from a single table.  But, for now, we define two
 111    separate ID tables, and then a third table that combines them
 112    just for the purpose of exporting the autoloading information.
 113 */
 114 static struct usb_device_id id_table_std [] = {
 115         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 116         { }                                             /* Terminating entry */
 117 };
 118
 119 static struct usb_device_id id_table_prerenumeration [] = {
 120         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 121         { }                                             /* Terminating entry */
 122 };
 123
 124 static struct usb_device_id id_table_combined [] = {
 125         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 126         { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 127         { }                                             /* Terminating entry */
 128 };
 129
 130 MODULE_DEVICE_TABLE(usb, id_table_combined);
 131
 132 static struct usb_driver whiteheat_driver = {
 133         .name =         "whiteheat",
 134         .probe =        usb_serial_probe,
 135         .disconnect =   usb_serial_disconnect,
 136         .id_table =     id_table_combined,
 137         .no_dynamic_id =        1,
 138 };
 139
 140 /* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */
 141 static int  whiteheat_firmware_download(struct usb_serial *serial,
 142                                         const struct usb_device_id *id);
 143 static int  whiteheat_firmware_attach(struct usb_serial *serial);
 144
 145 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 146 static int  whiteheat_attach(struct usb_serial *serial);
 147 static void whiteheat_shutdown(struct usb_serial *serial);
 148 static int  whiteheat_open(struct tty_struct *tty,
 149                         struct usb_serial_port *port, struct file *filp);
 150 static void whiteheat_close(struct tty_struct *tty,
 151                         struct usb_serial_port *port, struct file *filp);
 152 static int  whiteheat_write(struct tty_struct *tty,
 153                         struct usb_serial_port *port,
 154                         const unsigned char *buf, int count);
 155 static int  whiteheat_write_room(struct tty_struct *tty);
 156 static int  whiteheat_ioctl(struct tty_struct *tty, struct file *file,
 157                         unsigned int cmd, unsigned long arg);
 158 static void whiteheat_set_termios(struct tty_struct *tty,
 159                         struct usb_serial_port *port, struct ktermios *old);
 160 static int  whiteheat_tiocmget(struct tty_struct *tty, struct file *file);
 161 static int  whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
 162                         unsigned int set, unsigned int clear);
 163 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state);
 164 static int  whiteheat_chars_in_buffer(struct tty_struct *tty);
 165 static void whiteheat_throttle(struct tty_struct *tty);
 166 static void whiteheat_unthrottle(struct tty_struct *tty);
 167 static void whiteheat_read_callback(struct urb *urb);
 168 static void whiteheat_write_callback(struct urb *urb);
 169
 170 static struct usb_serial_driver whiteheat_fake_device = {
 171         .driver = {
 172                 .owner =        THIS_MODULE,
 173                 .name =         "whiteheatnofirm",
 174         },
 175         .description =          "Connect Tech - WhiteHEAT - (prerenumeration)",
 176         .usb_driver =           &whiteheat_driver,
 177         .id_table =             id_table_prerenumeration,
 178         .num_ports =            1,
 179         .probe =                whiteheat_firmware_download,
 180         .attach =               whiteheat_firmware_attach,
 181 };
 182
 183 static struct usb_serial_driver whiteheat_device = {
 184         .driver = {
 185                 .owner =        THIS_MODULE,
 186                 .name =         "whiteheat",
 187         },
 188         .description =          "Connect Tech - WhiteHEAT",
 189         .usb_driver =           &whiteheat_driver,
 190         .id_table =             id_table_std,
 191         .num_ports =            4,
 192         .attach =               whiteheat_attach,
 193         .shutdown =             whiteheat_shutdown,
 194         .open =                 whiteheat_open,
 195         .close =                whiteheat_close,
 196         .write =                whiteheat_write,
 197         .write_room =           whiteheat_write_room,
 198         .ioctl =                whiteheat_ioctl,
 199         .set_termios =          whiteheat_set_termios,
 200         .break_ctl =            whiteheat_break_ctl,
 201         .tiocmget =             whiteheat_tiocmget,
 202         .tiocmset =             whiteheat_tiocmset,
 203         .chars_in_buffer =      whiteheat_chars_in_buffer,
 204         .throttle =             whiteheat_throttle,
 205         .unthrottle =           whiteheat_unthrottle,
 206         .read_bulk_callback =   whiteheat_read_callback,
 207         .write_bulk_callback =  whiteheat_write_callback,
 208 };
 209
 210
 211 struct whiteheat_command_private {
 212         struct mutex            mutex;
 213         __u8                    port_running;
 214         __u8                    command_finished;
 215         wait_queue_head_t       wait_command; /* for handling sleeping whilst
 216                                                  waiting for a command to
 217                                                  finish */
 218         __u8                    result_buffer[64];
 219 };
 220
 221
 222 #define THROTTLED               0x01
 223 #define ACTUALLY_THROTTLED      0x02
 224
 225 static int urb_pool_size = 8;
 226
 227 struct whiteheat_urb_wrap {
 228         struct list_head        list;
 229         struct urb              *urb;
 230 };
 231
 232 struct whiteheat_private {
 233         spinlock_t              lock;
 234         __u8                    flags;
 235         __u8                    mcr;            /* FIXME: no locking on mcr */
 236         struct list_head        rx_urbs_free;
 237         struct list_head        rx_urbs_submitted;
 238         struct list_head        rx_urb_q;
 239         struct work_struct      rx_work;
 240         struct usb_serial_port  *port;
 241         struct list_head        tx_urbs_free;
 242         struct list_head        tx_urbs_submitted;
 243         struct mutex            deathwarrant;
 244 };
 245
 246
 247 /* local function prototypes */
 248 static int start_command_port(struct usb_serial *serial);
 249 static void stop_command_port(struct usb_serial *serial);
 250 static void command_port_write_callback(struct urb *urb);
 251 static void command_port_read_callback(struct urb *urb);
 252
 253 static int start_port_read(struct usb_serial_port *port);
 254 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
 255                                                 struct list_head *head);
 256 static struct list_head *list_first(struct list_head *head);
 257 static void rx_data_softint(struct work_struct *work);
 258
 259 static int firm_send_command(struct usb_serial_port *port, __u8 command,
 260                                                 __u8 *data, __u8 datasize);
 261 static int firm_open(struct usb_serial_port *port);
 262 static int firm_close(struct usb_serial_port *port);
 263 static int firm_setup_port(struct tty_struct *tty);
 264 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 265 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 266 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
 267 static int firm_purge(struct usb_serial_port *port, __u8 rxtx);
 268 static int firm_get_dtr_rts(struct usb_serial_port *port);
 269 static int firm_report_tx_done(struct usb_serial_port *port);
 270
 271
 272 #define COMMAND_PORT            4
 273 #define COMMAND_TIMEOUT         (2*HZ)  /* 2 second timeout for a command */
 274 #define COMMAND_TIMEOUT_MS      2000
 275 #define CLOSING_DELAY           (30 * HZ)
 276
 277
 278 /*****************************************************************************
 279  * Connect Tech's White Heat prerenumeration driver functions
 280  *****************************************************************************/
 281
 282 /* steps to download the firmware to the WhiteHEAT device:
 283  - hold the reset (by writing to the reset bit of the CPUCS register)
 284  - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD
 285  - release the reset (by writing to the CPUCS register)
 286  - download the WH.HEX file for all addresses greater than 0x1b3f using
 287    VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD
 288  - hold the reset
 289  - download the WH.HEX file for all addresses less than 0x1b40 using
 290    VENDOR_REQUEST_ANCHOR_LOAD
 291  - release the reset
 292  - device renumerated itself and comes up as new device id with all
 293    firmware download completed.
 294 */
 295 static int whiteheat_firmware_download(struct usb_serial *serial,
 296                                         const struct usb_device_id *id)
 297 {
 298         int response, ret = -ENOENT;
 299         const struct firmware *loader_fw = NULL, *firmware_fw = NULL;
 300         const struct ihex_binrec *record;
 301
 302         dbg("%s", __func__);
 303
 304         if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
 305                                   &serial->dev->dev)) {
 306                 err("%s - request \"whiteheat.fw\" failed", __func__);
 307                 goto out;
 308         }
 309         if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
 310                              &serial->dev->dev)) {
 311                 err("%s - request \"whiteheat_loader.fw\" failed", __func__);
 312                 goto out;
 313         }
 314         ret = 0;
 315         response = ezusb_set_reset (serial, 1);
 316
 317         record = (const struct ihex_binrec *)loader_fw->data;
 318         while (record) {
 319                 response = ezusb_writememory (serial, be32_to_cpu(record->addr),
 320                                               (unsigned char *)record->data,
 321                                               be16_to_cpu(record->len), 0xa0);
 322                 if (response < 0) {
 323                         err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
 324                             __func__, response, be32_to_cpu(record->addr),
 325                             record->data, be16_to_cpu(record->len));
 326                         break;
 327                 }
 328                 record = ihex_next_binrec(record);
 329         }
 330
 331         response = ezusb_set_reset(serial, 0);
 332
 333         record = (const struct ihex_binrec *)firmware_fw->data;
 334         while (record && be32_to_cpu(record->addr) < 0x1b40)
 335                 record = ihex_next_binrec(record);
 336         while (record) {
 337                 response = ezusb_writememory (serial, be32_to_cpu(record->addr),
 338                                               (unsigned char *)record->data,
 339                                               be16_to_cpu(record->len), 0xa3);
 340                 if (response < 0) {
 341                         err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
 342                             __func__, response, be32_to_cpu(record->addr),
 343                             record->data, be16_to_cpu(record->len));
 344                         break;
 345                 }
 346                 ++record;
 347         }
 348
 349         response = ezusb_set_reset(serial, 1);
 350
 351         record = (const struct ihex_binrec *)firmware_fw->data;
 352         while (record && be32_to_cpu(record->addr) < 0x1b40) {
 353                 response = ezusb_writememory (serial, be32_to_cpu(record->addr),
 354                                               (unsigned char *)record->data,
 355                                               be16_to_cpu(record->len), 0xa0);
 356                 if (response < 0) {
 357                         err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
 358                             __func__, response, be32_to_cpu(record->addr),
 359                             record->data, be16_to_cpu(record->len));
 360                         break;
 361                 }
 362                 ++record;
 363         }
 364         ret = 0;
 365         response = ezusb_set_reset (serial, 0);
 366  out:
 367         release_firmware(loader_fw);
 368         release_firmware(firmware_fw);
 369         return ret;
 370 }
 371
 372
 373 static int whiteheat_firmware_attach(struct usb_serial *serial)
 374 {
 375         /* We want this device to fail to have a driver assigned to it */
 376         return 1;
 377 }
 378
 379
 380 /*****************************************************************************
 381  * Connect Tech's White Heat serial driver functions
 382  *****************************************************************************/
 383 static int whiteheat_attach(struct usb_serial *serial)
 384 {
 385         struct usb_serial_port *command_port;
 386         struct whiteheat_command_private *command_info;
 387         struct usb_serial_port *port;
 388         struct whiteheat_private *info;
 389         struct whiteheat_hw_info *hw_info;
 390         int pipe;
 391         int ret;
 392         int alen;
 393         __u8 *command;
 394         __u8 *result;
 395         int i;
 396         int j;
 397         struct urb *urb;
 398         int buf_size;
 399         struct whiteheat_urb_wrap *wrap;
 400         struct list_head *tmp;
 401
 402         command_port = serial->port[COMMAND_PORT];
 403
 404         pipe = usb_sndbulkpipe(serial->dev,
 405                         command_port->bulk_out_endpointAddress);
 406         command = kmalloc(2, GFP_KERNEL);
 407         if (!command)
 408                 goto no_command_buffer;
 409         command[0] = WHITEHEAT_GET_HW_INFO;
 410         command[1] = 0;
 411
 412         result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL);
 413         if (!result)
 414                 goto no_result_buffer;
 415         /*
 416          * When the module is reloaded the firmware is still there and
 417          * the endpoints are still in the usb core unchanged. This is the
 418          * unlinking bug in disguise. Same for the call below.
 419          */
 420         usb_clear_halt(serial->dev, pipe);
 421         ret = usb_bulk_msg(serial->dev, pipe, command, 2,
 422                                                 &alen, COMMAND_TIMEOUT_MS);
 423         if (ret) {
 424                 err("%s: Couldn't send command [%d]",
 425                                 serial->type->description, ret);
 426                 goto no_firmware;
 427         } else if (alen != 2) {
 428                 err("%s: Send command incomplete [%d]",
 429                                 serial->type->description, alen);
 430                 goto no_firmware;
 431         }
 432
 433         pipe = usb_rcvbulkpipe(serial->dev,
 434                                 command_port->bulk_in_endpointAddress);
 435         /* See the comment on the usb_clear_halt() above */
 436         usb_clear_halt(serial->dev, pipe);
 437         ret = usb_bulk_msg(serial->dev, pipe, result,
 438                         sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 439         if (ret) {
 440                 err("%s: Couldn't get results [%d]",
 441                                 serial->type->description, ret);
 442                 goto no_firmware;
 443         } else if (alen != sizeof(*hw_info) + 1) {
 444                 err("%s: Get results incomplete [%d]",
 445                                 serial->type->description, alen);
 446                 goto no_firmware;
 447         } else if (result[0] != command[0]) {
 448                 err("%s: Command failed [%d]",
 449                                 serial->type->description, result[0]);
 450                 goto no_firmware;
 451         }
 452
 453         hw_info = (struct whiteheat_hw_info *)&result[1];
 454
 455         info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
 456              DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
 457
 458         for (i = 0; i < serial->num_ports; i++) {
 459                 port = serial->port[i];
 460
 461                 info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
 462                 if (info == NULL) {
 463                         err("%s: Out of memory for port structures\n",
 464                                         serial->type->description);
 465                         goto no_private;
 466                 }
 467
 468                 spin_lock_init(&info->lock);
 469                 mutex_init(&info->deathwarrant);
 470                 info->flags = 0;
 471                 info->mcr = 0;
 472                 INIT_WORK(&info->rx_work, rx_data_softint);
 473                 info->port = port;
 474
 475                 INIT_LIST_HEAD(&info->rx_urbs_free);
 476                 INIT_LIST_HEAD(&info->rx_urbs_submitted);
 477                 INIT_LIST_HEAD(&info->rx_urb_q);
 478                 INIT_LIST_HEAD(&info->tx_urbs_free);
 479                 INIT_LIST_HEAD(&info->tx_urbs_submitted);
 480
 481                 for (j = 0; j < urb_pool_size; j++) {
 482                         urb = usb_alloc_urb(0, GFP_KERNEL);
 483                         if (!urb) {
 484                                 err("No free urbs available");
 485                                 goto no_rx_urb;
 486                         }
 487                         buf_size = port->read_urb->transfer_buffer_length;
 488                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 489                         if (!urb->transfer_buffer) {
 490                                 err("Couldn't allocate urb buffer");
 491                                 goto no_rx_buf;
 492                         }
 493                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 494                         if (!wrap) {
 495                                 err("Couldn't allocate urb wrapper");
 496                                 goto no_rx_wrap;
 497                         }
 498                         usb_fill_bulk_urb(urb, serial->dev,
 499                                         usb_rcvbulkpipe(serial->dev,
 500                                                 port->bulk_in_endpointAddress),
 501                                         urb->transfer_buffer, buf_size,
 502                                         whiteheat_read_callback, port);
 503                         wrap->urb = urb;
 504                         list_add(&wrap->list, &info->rx_urbs_free);
 505
 506                         urb = usb_alloc_urb(0, GFP_KERNEL);
 507                         if (!urb) {
 508                                 err("No free urbs available");
 509                                 goto no_tx_urb;
 510                         }
 511                         buf_size = port->write_urb->transfer_buffer_length;
 512                         urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 513                         if (!urb->transfer_buffer) {
 514                                 err("Couldn't allocate urb buffer");
 515                                 goto no_tx_buf;
 516                         }
 517                         wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 518                         if (!wrap) {
 519                                 err("Couldn't allocate urb wrapper");
 520                                 goto no_tx_wrap;
 521                         }
 522                         usb_fill_bulk_urb(urb, serial->dev,
 523                                         usb_sndbulkpipe(serial->dev,
 524                                                 port->bulk_out_endpointAddress),
 525                                         urb->transfer_buffer, buf_size,
 526                                         whiteheat_write_callback, port);
 527                         wrap->urb = urb;
 528                         list_add(&wrap->list, &info->tx_urbs_free);
 529                 }
 530
 531                 usb_set_serial_port_data(port, info);
 532         }
 533
 534         command_info = kmalloc(sizeof(struct whiteheat_command_private),
 535                                                                 GFP_KERNEL);
 536         if (command_info == NULL) {
 537                 err("%s: Out of memory for port structures\n",
 538                                         serial->type->description);
 539                 goto no_command_private;
 540         }
 541
 542         mutex_init(&command_info->mutex);
 543         command_info->port_running = 0;
 544         init_waitqueue_head(&command_info->wait_command);
 545         usb_set_serial_port_data(command_port, command_info);
 546         command_port->write_urb->complete = command_port_write_callback;
 547         command_port->read_urb->complete = command_port_read_callback;
 548         kfree(result);
 549         kfree(command);
 550
 551         return 0;
 552
 553 no_firmware:
 554         /* Firmware likely not running */
 555         err("%s: Unable to retrieve firmware version, try replugging\n",
 556                                         serial->type->description);
 557         err("%s: If the firmware is not running (status led not blinking)\n",
 558                                         serial->type->description);
 559         err("%s: please contact support@connecttech.com\n",
 560                                         serial->type->description);
 561         kfree(result);
 562         return -ENODEV;
 563
 564 no_command_private:
 565         for (i = serial->num_ports - 1; i >= 0; i--) {
 566                 port = serial->port[i];
 567                 info = usb_get_serial_port_data(port);
 568                 for (j = urb_pool_size - 1; j >= 0; j--) {
 569                         tmp = list_first(&info->tx_urbs_free);
 570                         list_del(tmp);
 571                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 572                         urb = wrap->urb;
 573                         kfree(wrap);
 574 no_tx_wrap:
 575                         kfree(urb->transfer_buffer);
 576 no_tx_buf:
 577                         usb_free_urb(urb);
 578 no_tx_urb:
 579                         tmp = list_first(&info->rx_urbs_free);
 580                         list_del(tmp);
 581                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 582                         urb = wrap->urb;
 583                         kfree(wrap);
 584 no_rx_wrap:
 585                         kfree(urb->transfer_buffer);
 586 no_rx_buf:
 587                         usb_free_urb(urb);
 588 no_rx_urb:
 589                         ;
 590                 }
 591                 kfree(info);
 592 no_private:
 593                 ;
 594         }
 595         kfree(result);
 596 no_result_buffer:
 597         kfree(command);
 598 no_command_buffer:
 599         return -ENOMEM;
 600 }
 601
 602
 603 static void whiteheat_shutdown(struct usb_serial *serial)
 604 {
 605         struct usb_serial_port *command_port;
 606         struct usb_serial_port *port;
 607         struct whiteheat_private *info;
 608         struct whiteheat_urb_wrap *wrap;
 609         struct urb *urb;
 610         struct list_head *tmp;
 611         struct list_head *tmp2;
 612         int i;
 613
 614         dbg("%s", __func__);
 615
 616         /* free up our private data for our command port */
 617         command_port = serial->port[COMMAND_PORT];
 618         kfree(usb_get_serial_port_data(command_port));
 619
 620         for (i = 0; i < serial->num_ports; i++) {
 621                 port = serial->port[i];
 622                 info = usb_get_serial_port_data(port);
 623                 list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
 624                         list_del(tmp);
 625                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 626                         urb = wrap->urb;
 627                         kfree(wrap);
 628                         kfree(urb->transfer_buffer);
 629                         usb_free_urb(urb);
 630                 }
 631                 list_for_each_safe(tmp, tmp2, &info->tx_urbs_free) {
 632                         list_del(tmp);
 633                         wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 634                         urb = wrap->urb;
 635                         kfree(wrap);
 636                         kfree(urb->transfer_buffer);
 637                         usb_free_urb(urb);
 638                 }
 639                 kfree(info);
 640         }
 641
 642         return;
 643 }
 644
 645 static int whiteheat_open(struct tty_struct *tty,
 646                         struct usb_serial_port *port, struct file *filp)
 647 {
 648         int             retval = 0;
 649
 650         dbg("%s - port %d", __func__, port->number);
 651
 652         retval = start_command_port(port->serial);
 653         if (retval)
 654                 goto exit;
 655
 656         if (tty)
 657                 tty->low_latency = 1;
 658
 659         /* send an open port command */
 660         retval = firm_open(port);
 661         if (retval) {
 662                 stop_command_port(port->serial);
 663                 goto exit;
 664         }
 665
 666         retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX);
 667         if (retval) {
 668                 firm_close(port);
 669                 stop_command_port(port->serial);
 670                 goto exit;
 671         }
 672
 673         if (tty)
 674                 firm_setup_port(tty);
 675
 676         /* Work around HCD bugs */
 677         usb_clear_halt(port->serial->dev, port->read_urb->pipe);
 678         usb_clear_halt(port->serial->dev, port->write_urb->pipe);
 679
 680         /* Start reading from the device */
 681         retval = start_port_read(port);
 682         if (retval) {
 683                 err("%s - failed submitting read urb, error %d",
 684                                 __func__, retval);
 685                 firm_close(port);
 686                 stop_command_port(port->serial);
 687                 goto exit;
 688         }
 689
 690 exit:
 691         dbg("%s - exit, retval = %d", __func__, retval);
 692         return retval;
 693 }
 694
 695
 696 static void whiteheat_close(struct tty_struct *tty,
 697                         struct usb_serial_port *port, struct file *filp)
 698 {
 699         struct whiteheat_private *info = usb_get_serial_port_data(port);
 700         struct whiteheat_urb_wrap *wrap;
 701         struct urb *urb;
 702         struct list_head *tmp;
 703         struct list_head *tmp2;
 704
 705         dbg("%s - port %d", __func__, port->number);
 706
 707         mutex_lock(&port->serial->disc_mutex);
 708         /* filp is NULL when called from usb_serial_disconnect */
 709         if ((filp && (tty_hung_up_p(filp))) || port->serial->disconnected) {
 710                 mutex_unlock(&port->serial->disc_mutex);
 711                 return;
 712         }
 713         mutex_unlock(&port->serial->disc_mutex);
 714
 715         tty->closing = 1;
 716
 717 /*
 718  * Not currently in use; tty_wait_until_sent() calls
 719  * serial_chars_in_buffer() which deadlocks on the second semaphore
 720  * acquisition. This should be fixed at some point. Greg's been
 721  * notified.
 722         if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
 723                 tty_wait_until_sent(tty, CLOSING_DELAY);
 724         }
 725 */
 726
 727         tty_driver_flush_buffer(tty);
 728         tty_ldisc_flush(tty);
 729
 730         firm_report_tx_done(port);
 731
 732         firm_close(port);
 733
 734         /* shutdown our bulk reads and writes */
 735         mutex_lock(&info->deathwarrant);
 736         spin_lock_irq(&info->lock);
 737         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
 738                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 739                 urb = wrap->urb;
 740                 list_del(tmp);
 741                 spin_unlock_irq(&info->lock);
 742                 usb_kill_urb(urb);
 743                 spin_lock_irq(&info->lock);
 744                 list_add(tmp, &info->rx_urbs_free);
 745         }
 746         list_for_each_safe(tmp, tmp2, &info->rx_urb_q)
 747                 list_move(tmp, &info->rx_urbs_free);
 748         list_for_each_safe(tmp, tmp2, &info->tx_urbs_submitted) {
 749                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 750                 urb = wrap->urb;
 751                 list_del(tmp);
 752                 spin_unlock_irq(&info->lock);
 753                 usb_kill_urb(urb);
 754                 spin_lock_irq(&info->lock);
 755                 list_add(tmp, &info->tx_urbs_free);
 756         }
 757         spin_unlock_irq(&info->lock);
 758         mutex_unlock(&info->deathwarrant);
 759
 760         stop_command_port(port->serial);
 761
 762         tty->closing = 0;
 763 }
 764
 765
 766 static int whiteheat_write(struct tty_struct *tty,
 767         struct usb_serial_port *port, const unsigned char *buf, int count)
 768 {
 769         struct usb_serial *serial = port->serial;
 770         struct whiteheat_private *info = usb_get_serial_port_data(port);
 771         struct whiteheat_urb_wrap *wrap;
 772         struct urb *urb;
 773         int result;
 774         int bytes;
 775         int sent = 0;
 776         unsigned long flags;
 777         struct list_head *tmp;
 778
 779         dbg("%s - port %d", __func__, port->number);
 780
 781         if (count == 0) {
 782                 dbg("%s - write request of 0 bytes", __func__);
 783                 return (0);
 784         }
 785
 786         while (count) {
 787                 spin_lock_irqsave(&info->lock, flags);
 788                 if (list_empty(&info->tx_urbs_free)) {
 789                         spin_unlock_irqrestore(&info->lock, flags);
 790                         break;
 791                 }
 792                 tmp = list_first(&info->tx_urbs_free);
 793                 list_del(tmp);
 794                 spin_unlock_irqrestore(&info->lock, flags);
 795
 796                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 797                 urb = wrap->urb;
 798                 bytes = (count > port->bulk_out_size) ?
 799                                         port->bulk_out_size : count;
 800                 memcpy(urb->transfer_buffer, buf + sent, bytes);
 801
 802                 usb_serial_debug_data(debug, &port->dev,
 803                                 __func__, bytes, urb->transfer_buffer);
 804
 805                 urb->dev = serial->dev;
 806                 urb->transfer_buffer_length = bytes;
 807                 result = usb_submit_urb(urb, GFP_ATOMIC);
 808                 if (result) {
 809                         err("%s - failed submitting write urb, error %d",
 810                                                         __func__, result);
 811                         sent = result;
 812                         spin_lock_irqsave(&info->lock, flags);
 813                         list_add(tmp, &info->tx_urbs_free);
 814                         spin_unlock_irqrestore(&info->lock, flags);
 815                         break;
 816                 } else {
 817                         sent += bytes;
 818                         count -= bytes;
 819                         spin_lock_irqsave(&info->lock, flags);
 820                         list_add(tmp, &info->tx_urbs_submitted);
 821                         spin_unlock_irqrestore(&info->lock, flags);
 822                 }
 823         }
 824
 825         return sent;
 826 }
 827
 828 static int whiteheat_write_room(struct tty_struct *tty)
 829 {
 830         struct usb_serial_port *port = tty->driver_data;
 831         struct whiteheat_private *info = usb_get_serial_port_data(port);
 832         struct list_head *tmp;
 833         int room = 0;
 834         unsigned long flags;
 835
 836         dbg("%s - port %d", __func__, port->number);
 837
 838         spin_lock_irqsave(&info->lock, flags);
 839         list_for_each(tmp, &info->tx_urbs_free)
 840                 room++;
 841         spin_unlock_irqrestore(&info->lock, flags);
 842         room *= port->bulk_out_size;
 843
 844         dbg("%s - returns %d", __func__, room);
 845         return (room);
 846 }
 847
 848 static int whiteheat_tiocmget(struct tty_struct *tty, struct file *file)
 849 {
 850         struct usb_serial_port *port = tty->driver_data;
 851         struct whiteheat_private *info = usb_get_serial_port_data(port);
 852         unsigned int modem_signals = 0;
 853
 854         dbg("%s - port %d", __func__, port->number);
 855
 856         firm_get_dtr_rts(port);
 857         if (info->mcr & UART_MCR_DTR)
 858                 modem_signals |= TIOCM_DTR;
 859         if (info->mcr & UART_MCR_RTS)
 860                 modem_signals |= TIOCM_RTS;
 861
 862         return modem_signals;
 863 }
 864
 865 static int whiteheat_tiocmset(struct tty_struct *tty, struct file *file,
 866                                unsigned int set, unsigned int clear)
 867 {
 868         struct usb_serial_port *port = tty->driver_data;
 869         struct whiteheat_private *info = usb_get_serial_port_data(port);
 870
 871         dbg("%s - port %d", __func__, port->number);
 872
 873         if (set & TIOCM_RTS)
 874                 info->mcr |= UART_MCR_RTS;
 875         if (set & TIOCM_DTR)
 876                 info->mcr |= UART_MCR_DTR;
 877
 878         if (clear & TIOCM_RTS)
 879                 info->mcr &= ~UART_MCR_RTS;
 880         if (clear & TIOCM_DTR)
 881                 info->mcr &= ~UART_MCR_DTR;
 882
 883         firm_set_dtr(port, info->mcr & UART_MCR_DTR);
 884         firm_set_rts(port, info->mcr & UART_MCR_RTS);
 885         return 0;
 886 }
 887
 888
 889 static int whiteheat_ioctl(struct tty_struct *tty, struct file *file,
 890                                         unsigned int cmd, unsigned long arg)
 891 {
 892         struct usb_serial_port *port = tty->driver_data;
 893         struct serial_struct serstruct;
 894         void __user *user_arg = (void __user *)arg;
 895
 896         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 897
 898         switch (cmd) {
 899         case TIOCGSERIAL:
 900                 memset(&serstruct, 0, sizeof(serstruct));
 901                 serstruct.type = PORT_16654;
 902                 serstruct.line = port->serial->minor;
 903                 serstruct.port = port->number;
 904                 serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 905                 serstruct.xmit_fifo_size = port->bulk_out_size;
 906                 serstruct.custom_divisor = 0;
 907                 serstruct.baud_base = 460800;
 908                 serstruct.close_delay = CLOSING_DELAY;
 909                 serstruct.closing_wait = CLOSING_DELAY;
 910
 911                 if (copy_to_user(user_arg, &serstruct, sizeof(serstruct)))
 912                         return -EFAULT;
 913                 break;
 914         default:
 915                 break;
 916         }
 917
 918         return -ENOIOCTLCMD;
 919 }
 920
 921
 922 static void whiteheat_set_termios(struct tty_struct *tty,
 923         struct usb_serial_port *port, struct ktermios *old_termios)
 924 {
 925         firm_setup_port(tty);
 926 }
 927
 928 static void whiteheat_break_ctl(struct tty_struct *tty, int break_state)
 929 {
 930         struct usb_serial_port *port = tty->driver_data;
 931         firm_set_break(port, break_state);
 932 }
 933
 934
 935 static int whiteheat_chars_in_buffer(struct tty_struct *tty)
 936 {
 937         struct usb_serial_port *port = tty->driver_data;
 938         struct whiteheat_private *info = usb_get_serial_port_data(port);
 939         struct list_head *tmp;
 940         struct whiteheat_urb_wrap *wrap;
 941         int chars = 0;
 942         unsigned long flags;
 943
 944         dbg("%s - port %d", __func__, port->number);
 945
 946         spin_lock_irqsave(&info->lock, flags);
 947         list_for_each(tmp, &info->tx_urbs_submitted) {
 948                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 949                 chars += wrap->urb->transfer_buffer_length;
 950         }
 951         spin_unlock_irqrestore(&info->lock, flags);
 952
 953         dbg("%s - returns %d", __func__, chars);
 954         return chars;
 955 }
 956
 957
 958 static void whiteheat_throttle(struct tty_struct *tty)
 959 {
 960         struct usb_serial_port *port = tty->driver_data;
 961         struct whiteheat_private *info = usb_get_serial_port_data(port);
 962         unsigned long flags;
 963
 964         dbg("%s - port %d", __func__, port->number);
 965
 966         spin_lock_irqsave(&info->lock, flags);
 967         info->flags |= THROTTLED;
 968         spin_unlock_irqrestore(&info->lock, flags);
 969
 970         return;
 971 }
 972
 973
 974 static void whiteheat_unthrottle(struct tty_struct *tty)
 975 {
 976         struct usb_serial_port *port = tty->driver_data;
 977         struct whiteheat_private *info = usb_get_serial_port_data(port);
 978         int actually_throttled;
 979         unsigned long flags;
 980
 981         dbg("%s - port %d", __func__, port->number);
 982
 983         spin_lock_irqsave(&info->lock, flags);
 984         actually_throttled = info->flags & ACTUALLY_THROTTLED;
 985         info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
 986         spin_unlock_irqrestore(&info->lock, flags);
 987
 988         if (actually_throttled)
 989                 rx_data_softint(&info->rx_work);
 990
 991         return;
 992 }
 993
 994
 995 /*****************************************************************************
 996  * Connect Tech's White Heat callback routines
 997  *****************************************************************************/
 998 static void command_port_write_callback(struct urb *urb)
 999 {
1000         int status = urb->status;
1001
1002         dbg("%s", __func__);
1003
1004         if (status) {
1005                 dbg("nonzero urb status: %d", status);
1006                 return;
1007         }
1008 }
1009
1010
1011 static void command_port_read_callback(struct urb *urb)
1012 {
1013         struct usb_serial_port *command_port = urb->context;
1014         struct whiteheat_command_private *command_info;
1015         int status = urb->status;
1016         unsigned char *data = urb->transfer_buffer;
1017         int result;
1018
1019         dbg("%s", __func__);
1020
1021         command_info = usb_get_serial_port_data(command_port);
1022         if (!command_info) {
1023                 dbg("%s - command_info is NULL, exiting.", __func__);
1024                 return;
1025         }
1026         if (status) {
1027                 dbg("%s - nonzero urb status: %d", __func__, status);
1028                 if (status != -ENOENT)
1029                         command_info->command_finished = WHITEHEAT_CMD_FAILURE;
1030                 wake_up(&command_info->wait_command);
1031                 return;
1032         }
1033
1034         usb_serial_debug_data(debug, &command_port->dev,
1035                                 __func__, urb->actual_length, data);
1036
1037         if (data[0] == WHITEHEAT_CMD_COMPLETE) {
1038                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1039                 wake_up(&command_info->wait_command);
1040         } else if (data[0] == WHITEHEAT_CMD_FAILURE) {
1041                 command_info->command_finished = WHITEHEAT_CMD_FAILURE;
1042                 wake_up(&command_info->wait_command);
1043         } else if (data[0] == WHITEHEAT_EVENT) {
1044                 /* These are unsolicited reports from the firmware, hence no
1045                    waiting command to wakeup */
1046                 dbg("%s - event received", __func__);
1047         } else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
1048                 memcpy(command_info->result_buffer, &data[1],
1049                                                 urb->actual_length - 1);
1050                 command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
1051                 wake_up(&command_info->wait_command);
1052         } else
1053                 dbg("%s - bad reply from firmware", __func__);
1054
1055         /* Continue trying to always read */
1056         command_port->read_urb->dev = command_port->serial->dev;
1057         result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
1058         if (result)
1059                 dbg("%s - failed resubmitting read urb, error %d",
1060                         __func__, result);
1061 }
1062
1063
1064 static void whiteheat_read_callback(struct urb *urb)
1065 {
1066         struct usb_serial_port *port = urb->context;
1067         struct whiteheat_urb_wrap *wrap;
1068         unsigned char *data = urb->transfer_buffer;
1069         struct whiteheat_private *info = usb_get_serial_port_data(port);
1070         int status = urb->status;
1071
1072         dbg("%s - port %d", __func__, port->number);
1073
1074         spin_lock(&info->lock);
1075         wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
1076         if (!wrap) {
1077                 spin_unlock(&info->lock);
1078                 err("%s - Not my urb!", __func__);
1079                 return;
1080         }
1081         list_del(&wrap->list);
1082         spin_unlock(&info->lock);
1083
1084         if (status) {
1085                 dbg("%s - nonzero read bulk status received: %d",
1086                     __func__, status);
1087                 spin_lock(&info->lock);
1088                 list_add(&wrap->list, &info->rx_urbs_free);
1089                 spin_unlock(&info->lock);
1090                 return;
1091         }
1092
1093         usb_serial_debug_data(debug, &port->dev,
1094                                 __func__, urb->actual_length, data);
1095
1096         spin_lock(&info->lock);
1097         list_add_tail(&wrap->list, &info->rx_urb_q);
1098         if (info->flags & THROTTLED) {
1099                 info->flags |= ACTUALLY_THROTTLED;
1100                 spin_unlock(&info->lock);
1101                 return;
1102         }
1103         spin_unlock(&info->lock);
1104
1105         schedule_work(&info->rx_work);
1106 }
1107
1108
1109 static void whiteheat_write_callback(struct urb *urb)
1110 {
1111         struct usb_serial_port *port = urb->context;
1112         struct whiteheat_private *info = usb_get_serial_port_data(port);
1113         struct whiteheat_urb_wrap *wrap;
1114         int status = urb->status;
1115
1116         dbg("%s - port %d", __func__, port->number);
1117
1118         spin_lock(&info->lock);
1119         wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
1120         if (!wrap) {
1121                 spin_unlock(&info->lock);
1122                 err("%s - Not my urb!", __func__);
1123                 return;
1124         }
1125         list_move(&wrap->list, &info->tx_urbs_free);
1126         spin_unlock(&info->lock);
1127
1128         if (status) {
1129                 dbg("%s - nonzero write bulk status received: %d",
1130                     __func__, status);
1131                 return;
1132         }
1133
1134         usb_serial_port_softint(port);
1135 }
1136
1137
1138 /*****************************************************************************
1139  * Connect Tech's White Heat firmware interface
1140  *****************************************************************************/
1141 static int firm_send_command(struct usb_serial_port *port, __u8 command,
1142                                                 __u8 *data, __u8 datasize)
1143 {
1144         struct usb_serial_port *command_port;
1145         struct whiteheat_command_private *command_info;
1146         struct whiteheat_private *info;
1147         __u8 *transfer_buffer;
1148         int retval = 0;
1149         int t;
1150
1151         dbg("%s - command %d", __func__, command);
1152
1153         command_port = port->serial->port[COMMAND_PORT];
1154         command_info = usb_get_serial_port_data(command_port);
1155         mutex_lock(&command_info->mutex);
1156         command_info->command_finished = false;
1157
1158         transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
1159         transfer_buffer[0] = command;
1160         memcpy(&transfer_buffer[1], data, datasize);
1161         command_port->write_urb->transfer_buffer_length = datasize + 1;
1162         command_port->write_urb->dev = port->serial->dev;
1163         retval = usb_submit_urb(command_port->write_urb, GFP_NOIO);
1164         if (retval) {
1165                 dbg("%s - submit urb failed", __func__);
1166                 goto exit;
1167         }
1168
1169         /* wait for the command to complete */
1170         t = wait_event_timeout(command_info->wait_command,
1171                 (bool)command_info->command_finished, COMMAND_TIMEOUT);
1172         if (!t)
1173                 usb_kill_urb(command_port->write_urb);
1174
1175         if (command_info->command_finished == false) {
1176                 dbg("%s - command timed out.", __func__);
1177                 retval = -ETIMEDOUT;
1178                 goto exit;
1179         }
1180
1181         if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
1182                 dbg("%s - command failed.", __func__);
1183                 retval = -EIO;
1184                 goto exit;
1185         }
1186
1187         if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
1188                 dbg("%s - command completed.", __func__);
1189                 switch (command) {
1190                 case WHITEHEAT_GET_DTR_RTS:
1191                         info = usb_get_serial_port_data(port);
1192                         memcpy(&info->mcr, command_info->result_buffer,
1193                                         sizeof(struct whiteheat_dr_info));
1194                                 break;
1195                 }
1196         }
1197 exit:
1198         mutex_unlock(&command_info->mutex);
1199         return retval;
1200 }
1201
1202
1203 static int firm_open(struct usb_serial_port *port)
1204 {
1205         struct whiteheat_simple open_command;
1206
1207         open_command.port = port->number - port->serial->minor + 1;
1208         return firm_send_command(port, WHITEHEAT_OPEN,
1209                 (__u8 *)&open_command, sizeof(open_command));
1210 }
1211
1212
1213 static int firm_close(struct usb_serial_port *port)
1214 {
1215         struct whiteheat_simple close_command;
1216
1217         close_command.port = port->number - port->serial->minor + 1;
1218         return firm_send_command(port, WHITEHEAT_CLOSE,
1219                         (__u8 *)&close_command, sizeof(close_command));
1220 }
1221
1222
1223 static int firm_setup_port(struct tty_struct *tty)
1224 {
1225         struct usb_serial_port *port = tty->driver_data;
1226         struct whiteheat_port_settings port_settings;
1227         unsigned int cflag = tty->termios->c_cflag;
1228
1229         port_settings.port = port->number + 1;
1230
1231         /* get the byte size */
1232         switch (cflag & CSIZE) {
1233         case CS5:       port_settings.bits = 5;   break;
1234         case CS6:       port_settings.bits = 6;   break;
1235         case CS7:       port_settings.bits = 7;   break;
1236         default:
1237         case CS8:       port_settings.bits = 8;   break;
1238         }
1239         dbg("%s - data bits = %d", __func__, port_settings.bits);
1240
1241         /* determine the parity */
1242         if (cflag & PARENB)
1243                 if (cflag & CMSPAR)
1244                         if (cflag & PARODD)
1245                                 port_settings.parity = WHITEHEAT_PAR_MARK;
1246                         else
1247                                 port_settings.parity = WHITEHEAT_PAR_SPACE;
1248                 else
1249                         if (cflag & PARODD)
1250                                 port_settings.parity = WHITEHEAT_PAR_ODD;
1251                         else
1252                                 port_settings.parity = WHITEHEAT_PAR_EVEN;
1253         else
1254                 port_settings.parity = WHITEHEAT_PAR_NONE;
1255         dbg("%s - parity = %c", __func__, port_settings.parity);
1256
1257         /* figure out the stop bits requested */
1258         if (cflag & CSTOPB)
1259                 port_settings.stop = 2;
1260         else
1261                 port_settings.stop = 1;
1262         dbg("%s - stop bits = %d", __func__, port_settings.stop);
1263
1264         /* figure out the flow control settings */
1265         if (cflag & CRTSCTS)
1266                 port_settings.hflow = (WHITEHEAT_HFLOW_CTS |
1267                                                 WHITEHEAT_HFLOW_RTS);
1268         else
1269                 port_settings.hflow = WHITEHEAT_HFLOW_NONE;
1270         dbg("%s - hardware flow control = %s %s %s %s", __func__,
1271             (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
1272             (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
1273             (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
1274             (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
1275
1276         /* determine software flow control */
1277         if (I_IXOFF(tty))
1278                 port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
1279         else
1280                 port_settings.sflow = WHITEHEAT_SFLOW_NONE;
1281         dbg("%s - software flow control = %c", __func__, port_settings.sflow);
1282
1283         port_settings.xon = START_CHAR(tty);
1284         port_settings.xoff = STOP_CHAR(tty);
1285         dbg("%s - XON = %2x, XOFF = %2x",
1286                         __func__, port_settings.xon, port_settings.xoff);
1287
1288         /* get the baud rate wanted */
1289         port_settings.baud = tty_get_baud_rate(tty);
1290         dbg("%s - baud rate = %d", __func__, port_settings.baud);
1291
1292         /* fixme: should set validated settings */
1293         tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
1294         /* handle any settings that aren't specified in the tty structure */
1295         port_settings.lloop = 0;
1296
1297         /* now send the message to the device */
1298         return firm_send_command(port, WHITEHEAT_SETUP_PORT,
1299                         (__u8 *)&port_settings, sizeof(port_settings));
1300 }
1301
1302
1303 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff)
1304 {
1305         struct whiteheat_set_rdb rts_command;
1306
1307         rts_command.port = port->number - port->serial->minor + 1;
1308         rts_command.state = onoff;
1309         return firm_send_command(port, WHITEHEAT_SET_RTS,
1310                         (__u8 *)&rts_command, sizeof(rts_command));
1311 }
1312
1313
1314 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff)
1315 {
1316         struct whiteheat_set_rdb dtr_command;
1317
1318         dtr_command.port = port->number - port->serial->minor + 1;
1319         dtr_command.state = onoff;
1320         return firm_send_command(port, WHITEHEAT_SET_DTR,
1321                         (__u8 *)&dtr_command, sizeof(dtr_command));
1322 }
1323
1324
1325 static int firm_set_break(struct usb_serial_port *port, __u8 onoff)
1326 {
1327         struct whiteheat_set_rdb break_command;
1328
1329         break_command.port = port->number - port->serial->minor + 1;
1330         break_command.state = onoff;
1331         return firm_send_command(port, WHITEHEAT_SET_BREAK,
1332                         (__u8 *)&break_command, sizeof(break_command));
1333 }
1334
1335
1336 static int firm_purge(struct usb_serial_port *port, __u8 rxtx)
1337 {
1338         struct whiteheat_purge purge_command;
1339
1340         purge_command.port = port->number - port->serial->minor + 1;
1341         purge_command.what = rxtx;
1342         return firm_send_command(port, WHITEHEAT_PURGE,
1343                         (__u8 *)&purge_command, sizeof(purge_command));
1344 }
1345
1346
1347 static int firm_get_dtr_rts(struct usb_serial_port *port)
1348 {
1349         struct whiteheat_simple get_dr_command;
1350
1351         get_dr_command.port = port->number - port->serial->minor + 1;
1352         return firm_send_command(port, WHITEHEAT_GET_DTR_RTS,
1353                         (__u8 *)&get_dr_command, sizeof(get_dr_command));
1354 }
1355
1356
1357 static int firm_report_tx_done(struct usb_serial_port *port)
1358 {
1359         struct whiteheat_simple close_command;
1360
1361         close_command.port = port->number - port->serial->minor + 1;
1362         return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE,
1363                         (__u8 *)&close_command, sizeof(close_command));
1364 }
1365
1366
1367 /*****************************************************************************
1368  * Connect Tech's White Heat utility functions
1369  *****************************************************************************/
1370 static int start_command_port(struct usb_serial *serial)
1371 {
1372         struct usb_serial_port *command_port;
1373         struct whiteheat_command_private *command_info;
1374         int retval = 0;
1375
1376         command_port = serial->port[COMMAND_PORT];
1377         command_info = usb_get_serial_port_data(command_port);
1378         mutex_lock(&command_info->mutex);
1379         if (!command_info->port_running) {
1380                 /* Work around HCD bugs */
1381                 usb_clear_halt(serial->dev, command_port->read_urb->pipe);
1382
1383                 command_port->read_urb->dev = serial->dev;
1384                 retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
1385                 if (retval) {
1386                         err("%s - failed submitting read urb, error %d",
1387                                                         __func__, retval);
1388                         goto exit;
1389                 }
1390         }
1391         command_info->port_running++;
1392
1393 exit:
1394         mutex_unlock(&command_info->mutex);
1395         return retval;
1396 }
1397
1398
1399 static void stop_command_port(struct usb_serial *serial)
1400 {
1401         struct usb_serial_port *command_port;
1402         struct whiteheat_command_private *command_info;
1403
1404         command_port = serial->port[COMMAND_PORT];
1405         command_info = usb_get_serial_port_data(command_port);
1406         mutex_lock(&command_info->mutex);
1407         command_info->port_running--;
1408         if (!command_info->port_running)
1409                 usb_kill_urb(command_port->read_urb);
1410         mutex_unlock(&command_info->mutex);
1411 }
1412
1413
1414 static int start_port_read(struct usb_serial_port *port)
1415 {
1416         struct whiteheat_private *info = usb_get_serial_port_data(port);
1417         struct whiteheat_urb_wrap *wrap;
1418         struct urb *urb;
1419         int retval = 0;
1420         unsigned long flags;
1421         struct list_head *tmp;
1422         struct list_head *tmp2;
1423
1424         spin_lock_irqsave(&info->lock, flags);
1425
1426         list_for_each_safe(tmp, tmp2, &info->rx_urbs_free) {
1427                 list_del(tmp);
1428                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1429                 urb = wrap->urb;
1430                 urb->dev = port->serial->dev;
1431                 spin_unlock_irqrestore(&info->lock, flags);
1432                 retval = usb_submit_urb(urb, GFP_KERNEL);
1433                 if (retval) {
1434                         spin_lock_irqsave(&info->lock, flags);
1435                         list_add(tmp, &info->rx_urbs_free);
1436                         list_for_each_safe(tmp, tmp2, &info->rx_urbs_submitted) {
1437                                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1438                                 urb = wrap->urb;
1439                                 list_del(tmp);
1440                                 spin_unlock_irqrestore(&info->lock, flags);
1441                                 usb_kill_urb(urb);
1442                                 spin_lock_irqsave(&info->lock, flags);
1443                                 list_add(tmp, &info->rx_urbs_free);
1444                         }
1445                         break;
1446                 }
1447                 spin_lock_irqsave(&info->lock, flags);
1448                 list_add(tmp, &info->rx_urbs_submitted);
1449         }
1450
1451         spin_unlock_irqrestore(&info->lock, flags);
1452
1453         return retval;
1454 }
1455
1456
1457 static struct whiteheat_urb_wrap *urb_to_wrap(struct urb *urb,
1458                                                 struct list_head *head)
1459 {
1460         struct whiteheat_urb_wrap *wrap;
1461         struct list_head *tmp;
1462
1463         list_for_each(tmp, head) {
1464                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1465                 if (wrap->urb == urb)
1466                         return wrap;
1467         }
1468
1469         return NULL;
1470 }
1471
1472
1473 static struct list_head *list_first(struct list_head *head)
1474 {
1475         return head->next;
1476 }
1477
1478
1479 static void rx_data_softint(struct work_struct *work)
1480 {
1481         struct whiteheat_private *info =
1482                 container_of(work, struct whiteheat_private, rx_work);
1483         struct usb_serial_port *port = info->port;
1484         struct tty_struct *tty = port->port.tty;
1485         struct whiteheat_urb_wrap *wrap;
1486         struct urb *urb;
1487         unsigned long flags;
1488         struct list_head *tmp;
1489         struct list_head *tmp2;
1490         int result;
1491         int sent = 0;
1492
1493         spin_lock_irqsave(&info->lock, flags);
1494         if (info->flags & THROTTLED) {
1495                 spin_unlock_irqrestore(&info->lock, flags);
1496                 return;
1497         }
1498
1499         list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
1500                 list_del(tmp);
1501                 spin_unlock_irqrestore(&info->lock, flags);
1502
1503                 wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
1504                 urb = wrap->urb;
1505
1506                 if (tty && urb->actual_length) {
1507                         int len = tty_buffer_request_room(tty,
1508                                                         urb->actual_length);
1509                         /* This stuff can go away now I suspect */
1510                         if (unlikely(len < urb->actual_length)) {
1511                                 spin_lock_irqsave(&info->lock, flags);
1512                                 list_add(tmp, &info->rx_urb_q);
1513                                 spin_unlock_irqrestore(&info->lock, flags);
1514                                 tty_flip_buffer_push(tty);
1515                                 schedule_work(&info->rx_work);
1516                                 return;
1517                         }
1518                         tty_insert_flip_string(tty, urb->transfer_buffer, len);
1519                         sent += len;
1520                 }
1521
1522                 urb->dev = port->serial->dev;
1523                 result = usb_submit_urb(urb, GFP_ATOMIC);
1524                 if (result) {
1525                         err("%s - failed resubmitting read urb, error %d",
1526                                 __func__, result);
1527                         spin_lock_irqsave(&info->lock, flags);
1528                         list_add(tmp, &info->rx_urbs_free);
1529                         continue;
1530                 }
1531
1532                 spin_lock_irqsave(&info->lock, flags);
1533                 list_add(tmp, &info->rx_urbs_submitted);
1534         }
1535         spin_unlock_irqrestore(&info->lock, flags);
1536
1537         if (sent)
1538                 tty_flip_buffer_push(tty);
1539 }
1540
1541
1542 /*****************************************************************************
1543  * Connect Tech's White Heat module functions
1544  *****************************************************************************/
1545 static int __init whiteheat_init(void)
1546 {
1547         int retval;
1548         retval = usb_serial_register(&whiteheat_fake_device);
1549         if (retval)
1550                 goto failed_fake_register;
1551         retval = usb_serial_register(&whiteheat_device);
1552         if (retval)
1553                 goto failed_device_register;
1554         retval = usb_register(&whiteheat_driver);
1555         if (retval)
1556                 goto failed_usb_register;
1557         info(DRIVER_DESC " " DRIVER_VERSION);
1558         return 0;
1559 failed_usb_register:
1560         usb_serial_deregister(&whiteheat_device);
1561 failed_device_register:
1562         usb_serial_deregister(&whiteheat_fake_device);
1563 failed_fake_register:
1564         return retval;
1565 }
1566
1567
1568 static void __exit whiteheat_exit(void)
1569 {
1570         usb_deregister(&whiteheat_driver);
1571         usb_serial_deregister(&whiteheat_fake_device);
1572         usb_serial_deregister(&whiteheat_device);
1573 }
1574
1575
1576 module_init(whiteheat_init);
1577 module_exit(whiteheat_exit);
1578
1579 MODULE_AUTHOR(DRIVER_AUTHOR);
1580 MODULE_DESCRIPTION(DRIVER_DESC);
1581 MODULE_LICENSE("GPL");
1582
1583 MODULE_FIRMWARE("whiteheat.fw");
1584 MODULE_FIRMWARE("whiteheat_loader.fw");
1585
1586 module_param(urb_pool_size, int, 0);
1587 MODULE_PARM_DESC(urb_pool_size, "Number of urbs to use for buffering");
1588
1589 module_param(debug, bool, S_IRUGO | S_IWUSR);
1590 MODULE_PARM_DESC(debug, "Debug enabled or not");