Merge branch 'topic/hda' into for-linus
[linux-2.6] / drivers / i2c / busses / i2c-i801.c
1 /*
2     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
3     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
4     <mdsxyz123@yahoo.com>
5     Copyright (C) 2007, 2008   Jean Delvare <khali@linux-fr.org>
6
7     This program is free software; you can redistribute it and/or modify
8     it under the terms of the GNU General Public License as published by
9     the Free Software Foundation; either version 2 of the License, or
10     (at your option) any later version.
11
12     This program is distributed in the hope that it will be useful,
13     but WITHOUT ANY WARRANTY; without even the implied warranty of
14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15     GNU General Public License for more details.
16
17     You should have received a copy of the GNU General Public License
18     along with this program; if not, write to the Free Software
19     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22 /*
23   Supports the following Intel I/O Controller Hubs (ICH):
24
25                                   I/O                     Block   I2C
26                                   region  SMBus   Block   proc.   block
27   Chip name             PCI ID    size    PEC     buffer  call    read
28   ----------------------------------------------------------------------
29   82801AA  (ICH)        0x2413     16      no      no      no      no
30   82801AB  (ICH0)       0x2423     16      no      no      no      no
31   82801BA  (ICH2)       0x2443     16      no      no      no      no
32   82801CA  (ICH3)       0x2483     32     soft     no      no      no
33   82801DB  (ICH4)       0x24c3     32     hard     yes     no      no
34   82801E   (ICH5)       0x24d3     32     hard     yes     yes     yes
35   6300ESB               0x25a4     32     hard     yes     yes     yes
36   82801F   (ICH6)       0x266a     32     hard     yes     yes     yes
37   6310ESB/6320ESB       0x269b     32     hard     yes     yes     yes
38   82801G   (ICH7)       0x27da     32     hard     yes     yes     yes
39   82801H   (ICH8)       0x283e     32     hard     yes     yes     yes
40   82801I   (ICH9)       0x2930     32     hard     yes     yes     yes
41   Tolapai               0x5032     32     hard     yes     yes     yes
42   ICH10                 0x3a30     32     hard     yes     yes     yes
43   ICH10                 0x3a60     32     hard     yes     yes     yes
44   PCH                   0x3b30     32     hard     yes     yes     yes
45
46   Features supported by this driver:
47   Software PEC                     no
48   Hardware PEC                     yes
49   Block buffer                     yes
50   Block process call transaction   no
51   I2C block read transaction       yes  (doesn't use the block buffer)
52
53   See the file Documentation/i2c/busses/i2c-i801 for details.
54 */
55
56 /* Note: we assume there can only be one I801, with one SMBus interface */
57
58 #include <linux/module.h>
59 #include <linux/pci.h>
60 #include <linux/kernel.h>
61 #include <linux/stddef.h>
62 #include <linux/delay.h>
63 #include <linux/ioport.h>
64 #include <linux/init.h>
65 #include <linux/i2c.h>
66 #include <linux/acpi.h>
67 #include <linux/io.h>
68 #include <linux/dmi.h>
69
70 /* I801 SMBus address offsets */
71 #define SMBHSTSTS       (0 + i801_smba)
72 #define SMBHSTCNT       (2 + i801_smba)
73 #define SMBHSTCMD       (3 + i801_smba)
74 #define SMBHSTADD       (4 + i801_smba)
75 #define SMBHSTDAT0      (5 + i801_smba)
76 #define SMBHSTDAT1      (6 + i801_smba)
77 #define SMBBLKDAT       (7 + i801_smba)
78 #define SMBPEC          (8 + i801_smba)         /* ICH3 and later */
79 #define SMBAUXSTS       (12 + i801_smba)        /* ICH4 and later */
80 #define SMBAUXCTL       (13 + i801_smba)        /* ICH4 and later */
81
82 /* PCI Address Constants */
83 #define SMBBAR          4
84 #define SMBHSTCFG       0x040
85
86 /* Host configuration bits for SMBHSTCFG */
87 #define SMBHSTCFG_HST_EN        1
88 #define SMBHSTCFG_SMB_SMI_EN    2
89 #define SMBHSTCFG_I2C_EN        4
90
91 /* Auxillary control register bits, ICH4+ only */
92 #define SMBAUXCTL_CRC           1
93 #define SMBAUXCTL_E32B          2
94
95 /* kill bit for SMBHSTCNT */
96 #define SMBHSTCNT_KILL          2
97
98 /* Other settings */
99 #define MAX_TIMEOUT             100
100 #define ENABLE_INT9             0       /* set to 0x01 to enable - untested */
101
102 /* I801 command constants */
103 #define I801_QUICK              0x00
104 #define I801_BYTE               0x04
105 #define I801_BYTE_DATA          0x08
106 #define I801_WORD_DATA          0x0C
107 #define I801_PROC_CALL          0x10    /* unimplemented */
108 #define I801_BLOCK_DATA         0x14
109 #define I801_I2C_BLOCK_DATA     0x18    /* ICH5 and later */
110 #define I801_BLOCK_LAST         0x34
111 #define I801_I2C_BLOCK_LAST     0x38    /* ICH5 and later */
112 #define I801_START              0x40
113 #define I801_PEC_EN             0x80    /* ICH3 and later */
114
115 /* I801 Hosts Status register bits */
116 #define SMBHSTSTS_BYTE_DONE     0x80
117 #define SMBHSTSTS_INUSE_STS     0x40
118 #define SMBHSTSTS_SMBALERT_STS  0x20
119 #define SMBHSTSTS_FAILED        0x10
120 #define SMBHSTSTS_BUS_ERR       0x08
121 #define SMBHSTSTS_DEV_ERR       0x04
122 #define SMBHSTSTS_INTR          0x02
123 #define SMBHSTSTS_HOST_BUSY     0x01
124
125 #define STATUS_FLAGS            (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
126                                  SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
127                                  SMBHSTSTS_INTR)
128
129 static unsigned long i801_smba;
130 static unsigned char i801_original_hstcfg;
131 static struct pci_driver i801_driver;
132 static struct pci_dev *I801_dev;
133
134 #define FEATURE_SMBUS_PEC       (1 << 0)
135 #define FEATURE_BLOCK_BUFFER    (1 << 1)
136 #define FEATURE_BLOCK_PROC      (1 << 2)
137 #define FEATURE_I2C_BLOCK_READ  (1 << 3)
138 static unsigned int i801_features;
139
140 /* Make sure the SMBus host is ready to start transmitting.
141    Return 0 if it is, -EBUSY if it is not. */
142 static int i801_check_pre(void)
143 {
144         int status;
145
146         status = inb_p(SMBHSTSTS);
147         if (status & SMBHSTSTS_HOST_BUSY) {
148                 dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n");
149                 return -EBUSY;
150         }
151
152         status &= STATUS_FLAGS;
153         if (status) {
154                 dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n",
155                         status);
156                 outb_p(status, SMBHSTSTS);
157                 status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
158                 if (status) {
159                         dev_err(&I801_dev->dev,
160                                 "Failed clearing status flags (%02x)\n",
161                                 status);
162                         return -EBUSY;
163                 }
164         }
165
166         return 0;
167 }
168
169 /* Convert the status register to an error code, and clear it. */
170 static int i801_check_post(int status, int timeout)
171 {
172         int result = 0;
173
174         /* If the SMBus is still busy, we give up */
175         if (timeout) {
176                 dev_err(&I801_dev->dev, "Transaction timeout\n");
177                 /* try to stop the current command */
178                 dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
179                 outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
180                 msleep(1);
181                 outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
182
183                 /* Check if it worked */
184                 status = inb_p(SMBHSTSTS);
185                 if ((status & SMBHSTSTS_HOST_BUSY) ||
186                     !(status & SMBHSTSTS_FAILED))
187                         dev_err(&I801_dev->dev,
188                                 "Failed terminating the transaction\n");
189                 outb_p(STATUS_FLAGS, SMBHSTSTS);
190                 return -ETIMEDOUT;
191         }
192
193         if (status & SMBHSTSTS_FAILED) {
194                 result = -EIO;
195                 dev_err(&I801_dev->dev, "Transaction failed\n");
196         }
197         if (status & SMBHSTSTS_DEV_ERR) {
198                 result = -ENXIO;
199                 dev_dbg(&I801_dev->dev, "No response\n");
200         }
201         if (status & SMBHSTSTS_BUS_ERR) {
202                 result = -EAGAIN;
203                 dev_dbg(&I801_dev->dev, "Lost arbitration\n");
204         }
205
206         if (result) {
207                 /* Clear error flags */
208                 outb_p(status & STATUS_FLAGS, SMBHSTSTS);
209                 status = inb_p(SMBHSTSTS) & STATUS_FLAGS;
210                 if (status) {
211                         dev_warn(&I801_dev->dev, "Failed clearing status "
212                                  "flags at end of transaction (%02x)\n",
213                                  status);
214                 }
215         }
216
217         return result;
218 }
219
220 static int i801_transaction(int xact)
221 {
222         int status;
223         int result;
224         int timeout = 0;
225
226         result = i801_check_pre();
227         if (result < 0)
228                 return result;
229
230         /* the current contents of SMBHSTCNT can be overwritten, since PEC,
231          * INTREN, SMBSCMD are passed in xact */
232         outb_p(xact | I801_START, SMBHSTCNT);
233
234         /* We will always wait for a fraction of a second! */
235         do {
236                 msleep(1);
237                 status = inb_p(SMBHSTSTS);
238         } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
239
240         result = i801_check_post(status, timeout > MAX_TIMEOUT);
241         if (result < 0)
242                 return result;
243
244         outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
245         return 0;
246 }
247
248 /* wait for INTR bit as advised by Intel */
249 static void i801_wait_hwpec(void)
250 {
251         int timeout = 0;
252         int status;
253
254         do {
255                 msleep(1);
256                 status = inb_p(SMBHSTSTS);
257         } while ((!(status & SMBHSTSTS_INTR))
258                  && (timeout++ < MAX_TIMEOUT));
259
260         if (timeout > MAX_TIMEOUT)
261                 dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
262
263         outb_p(status, SMBHSTSTS);
264 }
265
266 static int i801_block_transaction_by_block(union i2c_smbus_data *data,
267                                            char read_write, int hwpec)
268 {
269         int i, len;
270         int status;
271
272         inb_p(SMBHSTCNT); /* reset the data buffer index */
273
274         /* Use 32-byte buffer to process this transaction */
275         if (read_write == I2C_SMBUS_WRITE) {
276                 len = data->block[0];
277                 outb_p(len, SMBHSTDAT0);
278                 for (i = 0; i < len; i++)
279                         outb_p(data->block[i+1], SMBBLKDAT);
280         }
281
282         status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
283                                   I801_PEC_EN * hwpec);
284         if (status)
285                 return status;
286
287         if (read_write == I2C_SMBUS_READ) {
288                 len = inb_p(SMBHSTDAT0);
289                 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
290                         return -EPROTO;
291
292                 data->block[0] = len;
293                 for (i = 0; i < len; i++)
294                         data->block[i + 1] = inb_p(SMBBLKDAT);
295         }
296         return 0;
297 }
298
299 static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
300                                                char read_write, int command,
301                                                int hwpec)
302 {
303         int i, len;
304         int smbcmd;
305         int status;
306         int result;
307         int timeout;
308
309         result = i801_check_pre();
310         if (result < 0)
311                 return result;
312
313         len = data->block[0];
314
315         if (read_write == I2C_SMBUS_WRITE) {
316                 outb_p(len, SMBHSTDAT0);
317                 outb_p(data->block[1], SMBBLKDAT);
318         }
319
320         for (i = 1; i <= len; i++) {
321                 if (i == len && read_write == I2C_SMBUS_READ) {
322                         if (command == I2C_SMBUS_I2C_BLOCK_DATA)
323                                 smbcmd = I801_I2C_BLOCK_LAST;
324                         else
325                                 smbcmd = I801_BLOCK_LAST;
326                 } else {
327                         if (command == I2C_SMBUS_I2C_BLOCK_DATA
328                          && read_write == I2C_SMBUS_READ)
329                                 smbcmd = I801_I2C_BLOCK_DATA;
330                         else
331                                 smbcmd = I801_BLOCK_DATA;
332                 }
333                 outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
334
335                 if (i == 1)
336                         outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
337
338                 /* We will always wait for a fraction of a second! */
339                 timeout = 0;
340                 do {
341                         msleep(1);
342                         status = inb_p(SMBHSTSTS);
343                 }
344                 while ((!(status & SMBHSTSTS_BYTE_DONE))
345                        && (timeout++ < MAX_TIMEOUT));
346
347                 result = i801_check_post(status, timeout > MAX_TIMEOUT);
348                 if (result < 0)
349                         return result;
350
351                 if (i == 1 && read_write == I2C_SMBUS_READ
352                  && command != I2C_SMBUS_I2C_BLOCK_DATA) {
353                         len = inb_p(SMBHSTDAT0);
354                         if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
355                                 dev_err(&I801_dev->dev,
356                                         "Illegal SMBus block read size %d\n",
357                                         len);
358                                 /* Recover */
359                                 while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY)
360                                         outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS);
361                                 outb_p(SMBHSTSTS_INTR, SMBHSTSTS);
362                                 return -EPROTO;
363                         }
364                         data->block[0] = len;
365                 }
366
367                 /* Retrieve/store value in SMBBLKDAT */
368                 if (read_write == I2C_SMBUS_READ)
369                         data->block[i] = inb_p(SMBBLKDAT);
370                 if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
371                         outb_p(data->block[i+1], SMBBLKDAT);
372
373                 /* signals SMBBLKDAT ready */
374                 outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS);
375         }
376
377         return 0;
378 }
379
380 static int i801_set_block_buffer_mode(void)
381 {
382         outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
383         if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
384                 return -EIO;
385         return 0;
386 }
387
388 /* Block transaction function */
389 static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
390                                   int command, int hwpec)
391 {
392         int result = 0;
393         unsigned char hostc;
394
395         if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
396                 if (read_write == I2C_SMBUS_WRITE) {
397                         /* set I2C_EN bit in configuration register */
398                         pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
399                         pci_write_config_byte(I801_dev, SMBHSTCFG,
400                                               hostc | SMBHSTCFG_I2C_EN);
401                 } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) {
402                         dev_err(&I801_dev->dev,
403                                 "I2C block read is unsupported!\n");
404                         return -EOPNOTSUPP;
405                 }
406         }
407
408         if (read_write == I2C_SMBUS_WRITE
409          || command == I2C_SMBUS_I2C_BLOCK_DATA) {
410                 if (data->block[0] < 1)
411                         data->block[0] = 1;
412                 if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
413                         data->block[0] = I2C_SMBUS_BLOCK_MAX;
414         } else {
415                 data->block[0] = 32;    /* max for SMBus block reads */
416         }
417
418         if ((i801_features & FEATURE_BLOCK_BUFFER)
419          && !(command == I2C_SMBUS_I2C_BLOCK_DATA
420               && read_write == I2C_SMBUS_READ)
421          && i801_set_block_buffer_mode() == 0)
422                 result = i801_block_transaction_by_block(data, read_write,
423                                                          hwpec);
424         else
425                 result = i801_block_transaction_byte_by_byte(data, read_write,
426                                                              command, hwpec);
427
428         if (result == 0 && hwpec)
429                 i801_wait_hwpec();
430
431         if (command == I2C_SMBUS_I2C_BLOCK_DATA
432          && read_write == I2C_SMBUS_WRITE) {
433                 /* restore saved configuration register value */
434                 pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
435         }
436         return result;
437 }
438
439 /* Return negative errno on error. */
440 static s32 i801_access(struct i2c_adapter * adap, u16 addr,
441                        unsigned short flags, char read_write, u8 command,
442                        int size, union i2c_smbus_data * data)
443 {
444         int hwpec;
445         int block = 0;
446         int ret, xact = 0;
447
448         hwpec = (i801_features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
449                 && size != I2C_SMBUS_QUICK
450                 && size != I2C_SMBUS_I2C_BLOCK_DATA;
451
452         switch (size) {
453         case I2C_SMBUS_QUICK:
454                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
455                        SMBHSTADD);
456                 xact = I801_QUICK;
457                 break;
458         case I2C_SMBUS_BYTE:
459                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
460                        SMBHSTADD);
461                 if (read_write == I2C_SMBUS_WRITE)
462                         outb_p(command, SMBHSTCMD);
463                 xact = I801_BYTE;
464                 break;
465         case I2C_SMBUS_BYTE_DATA:
466                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
467                        SMBHSTADD);
468                 outb_p(command, SMBHSTCMD);
469                 if (read_write == I2C_SMBUS_WRITE)
470                         outb_p(data->byte, SMBHSTDAT0);
471                 xact = I801_BYTE_DATA;
472                 break;
473         case I2C_SMBUS_WORD_DATA:
474                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
475                        SMBHSTADD);
476                 outb_p(command, SMBHSTCMD);
477                 if (read_write == I2C_SMBUS_WRITE) {
478                         outb_p(data->word & 0xff, SMBHSTDAT0);
479                         outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
480                 }
481                 xact = I801_WORD_DATA;
482                 break;
483         case I2C_SMBUS_BLOCK_DATA:
484                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
485                        SMBHSTADD);
486                 outb_p(command, SMBHSTCMD);
487                 block = 1;
488                 break;
489         case I2C_SMBUS_I2C_BLOCK_DATA:
490                 /* NB: page 240 of ICH5 datasheet shows that the R/#W
491                  * bit should be cleared here, even when reading */
492                 outb_p((addr & 0x7f) << 1, SMBHSTADD);
493                 if (read_write == I2C_SMBUS_READ) {
494                         /* NB: page 240 of ICH5 datasheet also shows
495                          * that DATA1 is the cmd field when reading */
496                         outb_p(command, SMBHSTDAT1);
497                 } else
498                         outb_p(command, SMBHSTCMD);
499                 block = 1;
500                 break;
501         default:
502                 dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
503                 return -EOPNOTSUPP;
504         }
505
506         if (hwpec)      /* enable/disable hardware PEC */
507                 outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
508         else
509                 outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
510
511         if(block)
512                 ret = i801_block_transaction(data, read_write, size, hwpec);
513         else
514                 ret = i801_transaction(xact | ENABLE_INT9);
515
516         /* Some BIOSes don't like it when PEC is enabled at reboot or resume
517            time, so we forcibly disable it after every transaction. Turn off
518            E32B for the same reason. */
519         if (hwpec || block)
520                 outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
521                        SMBAUXCTL);
522
523         if(block)
524                 return ret;
525         if(ret)
526                 return ret;
527         if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
528                 return 0;
529
530         switch (xact & 0x7f) {
531         case I801_BYTE: /* Result put in SMBHSTDAT0 */
532         case I801_BYTE_DATA:
533                 data->byte = inb_p(SMBHSTDAT0);
534                 break;
535         case I801_WORD_DATA:
536                 data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
537                 break;
538         }
539         return 0;
540 }
541
542
543 static u32 i801_func(struct i2c_adapter *adapter)
544 {
545         return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
546                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
547                I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
548                ((i801_features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
549                ((i801_features & FEATURE_I2C_BLOCK_READ) ?
550                 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
551 }
552
553 static const struct i2c_algorithm smbus_algorithm = {
554         .smbus_xfer     = i801_access,
555         .functionality  = i801_func,
556 };
557
558 static struct i2c_adapter i801_adapter = {
559         .owner          = THIS_MODULE,
560         .class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
561         .algo           = &smbus_algorithm,
562 };
563
564 static struct pci_device_id i801_ids[] = {
565         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
566         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
567         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
568         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
569         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
570         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
571         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
572         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
573         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
574         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
575         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
576         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
577         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
578         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
579         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
580         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
581         { 0, }
582 };
583
584 MODULE_DEVICE_TABLE (pci, i801_ids);
585
586 #if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
587 static unsigned char apanel_addr;
588
589 /* Scan the system ROM for the signature "FJKEYINF" */
590 static __init const void __iomem *bios_signature(const void __iomem *bios)
591 {
592         ssize_t offset;
593         const unsigned char signature[] = "FJKEYINF";
594
595         for (offset = 0; offset < 0x10000; offset += 0x10) {
596                 if (check_signature(bios + offset, signature,
597                                     sizeof(signature)-1))
598                         return bios + offset;
599         }
600         return NULL;
601 }
602
603 static void __init input_apanel_init(void)
604 {
605         void __iomem *bios;
606         const void __iomem *p;
607
608         bios = ioremap(0xF0000, 0x10000); /* Can't fail */
609         p = bios_signature(bios);
610         if (p) {
611                 /* just use the first address */
612                 apanel_addr = readb(p + 8 + 3) >> 1;
613         }
614         iounmap(bios);
615 }
616 #else
617 static void __init input_apanel_init(void) {}
618 #endif
619
620 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
621 struct dmi_onboard_device_info {
622         const char *name;
623         u8 type;
624         unsigned short i2c_addr;
625         const char *i2c_type;
626 };
627
628 static struct dmi_onboard_device_info __devinitdata dmi_devices[] = {
629         { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
630         { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
631         { "Hades",  DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
632 };
633
634 static void __devinit dmi_check_onboard_device(u8 type, const char *name,
635                                                struct i2c_adapter *adap)
636 {
637         int i;
638         struct i2c_board_info info;
639
640         for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
641                 /* & ~0x80, ignore enabled/disabled bit */
642                 if ((type & ~0x80) != dmi_devices[i].type)
643                         continue;
644                 if (strcmp(name, dmi_devices[i].name))
645                         continue;
646
647                 memset(&info, 0, sizeof(struct i2c_board_info));
648                 info.addr = dmi_devices[i].i2c_addr;
649                 strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
650                 i2c_new_device(adap, &info);
651                 break;
652         }
653 }
654
655 /* We use our own function to check for onboard devices instead of
656    dmi_find_device() as some buggy BIOS's have the devices we are interested
657    in marked as disabled */
658 static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
659                                                 void *adap)
660 {
661         int i, count;
662
663         if (dm->type != 10)
664                 return;
665
666         count = (dm->length - sizeof(struct dmi_header)) / 2;
667         for (i = 0; i < count; i++) {
668                 const u8 *d = (char *)(dm + 1) + (i * 2);
669                 const char *name = ((char *) dm) + dm->length;
670                 u8 type = d[0];
671                 u8 s = d[1];
672
673                 if (!s)
674                         continue;
675                 s--;
676                 while (s > 0 && name[0]) {
677                         name += strlen(name) + 1;
678                         s--;
679                 }
680                 if (name[0] == 0) /* Bogus string reference */
681                         continue;
682
683                 dmi_check_onboard_device(type, name, adap);
684         }
685 }
686 #endif
687
688 static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
689 {
690         unsigned char temp;
691         int err;
692 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
693         const char *vendor;
694 #endif
695
696         I801_dev = dev;
697         i801_features = 0;
698         switch (dev->device) {
699         case PCI_DEVICE_ID_INTEL_82801EB_3:
700         case PCI_DEVICE_ID_INTEL_ESB_4:
701         case PCI_DEVICE_ID_INTEL_ICH6_16:
702         case PCI_DEVICE_ID_INTEL_ICH7_17:
703         case PCI_DEVICE_ID_INTEL_ESB2_17:
704         case PCI_DEVICE_ID_INTEL_ICH8_5:
705         case PCI_DEVICE_ID_INTEL_ICH9_6:
706         case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
707         case PCI_DEVICE_ID_INTEL_ICH10_4:
708         case PCI_DEVICE_ID_INTEL_ICH10_5:
709         case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
710                 i801_features |= FEATURE_I2C_BLOCK_READ;
711                 /* fall through */
712         case PCI_DEVICE_ID_INTEL_82801DB_3:
713                 i801_features |= FEATURE_SMBUS_PEC;
714                 i801_features |= FEATURE_BLOCK_BUFFER;
715                 break;
716         }
717
718         err = pci_enable_device(dev);
719         if (err) {
720                 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
721                         err);
722                 goto exit;
723         }
724
725         /* Determine the address of the SMBus area */
726         i801_smba = pci_resource_start(dev, SMBBAR);
727         if (!i801_smba) {
728                 dev_err(&dev->dev, "SMBus base address uninitialized, "
729                         "upgrade BIOS\n");
730                 err = -ENODEV;
731                 goto exit;
732         }
733
734         err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
735         if (err)
736                 goto exit;
737
738         err = pci_request_region(dev, SMBBAR, i801_driver.name);
739         if (err) {
740                 dev_err(&dev->dev, "Failed to request SMBus region "
741                         "0x%lx-0x%Lx\n", i801_smba,
742                         (unsigned long long)pci_resource_end(dev, SMBBAR));
743                 goto exit;
744         }
745
746         pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
747         i801_original_hstcfg = temp;
748         temp &= ~SMBHSTCFG_I2C_EN;      /* SMBus timing */
749         if (!(temp & SMBHSTCFG_HST_EN)) {
750                 dev_info(&dev->dev, "Enabling SMBus device\n");
751                 temp |= SMBHSTCFG_HST_EN;
752         }
753         pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
754
755         if (temp & SMBHSTCFG_SMB_SMI_EN)
756                 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
757         else
758                 dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");
759
760         /* Clear special mode bits */
761         if (i801_features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
762                 outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
763                        SMBAUXCTL);
764
765         /* set up the sysfs linkage to our parent device */
766         i801_adapter.dev.parent = &dev->dev;
767
768         snprintf(i801_adapter.name, sizeof(i801_adapter.name),
769                 "SMBus I801 adapter at %04lx", i801_smba);
770         err = i2c_add_adapter(&i801_adapter);
771         if (err) {
772                 dev_err(&dev->dev, "Failed to add SMBus adapter\n");
773                 goto exit_release;
774         }
775
776         /* Register optional slaves */
777 #if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
778         if (apanel_addr) {
779                 struct i2c_board_info info;
780
781                 memset(&info, 0, sizeof(struct i2c_board_info));
782                 info.addr = apanel_addr;
783                 strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
784                 i2c_new_device(&i801_adapter, &info);
785         }
786 #endif
787 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
788         vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
789         if (vendor && !strcmp(vendor, "FUJITSU SIEMENS"))
790                 dmi_walk(dmi_check_onboard_devices, &i801_adapter);
791 #endif
792
793         return 0;
794
795 exit_release:
796         pci_release_region(dev, SMBBAR);
797 exit:
798         return err;
799 }
800
801 static void __devexit i801_remove(struct pci_dev *dev)
802 {
803         i2c_del_adapter(&i801_adapter);
804         pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg);
805         pci_release_region(dev, SMBBAR);
806         /*
807          * do not call pci_disable_device(dev) since it can cause hard hangs on
808          * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
809          */
810 }
811
812 #ifdef CONFIG_PM
813 static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
814 {
815         pci_save_state(dev);
816         pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg);
817         pci_set_power_state(dev, pci_choose_state(dev, mesg));
818         return 0;
819 }
820
821 static int i801_resume(struct pci_dev *dev)
822 {
823         pci_set_power_state(dev, PCI_D0);
824         pci_restore_state(dev);
825         return pci_enable_device(dev);
826 }
827 #else
828 #define i801_suspend NULL
829 #define i801_resume NULL
830 #endif
831
832 static struct pci_driver i801_driver = {
833         .name           = "i801_smbus",
834         .id_table       = i801_ids,
835         .probe          = i801_probe,
836         .remove         = __devexit_p(i801_remove),
837         .suspend        = i801_suspend,
838         .resume         = i801_resume,
839 };
840
841 static int __init i2c_i801_init(void)
842 {
843         input_apanel_init();
844         return pci_register_driver(&i801_driver);
845 }
846
847 static void __exit i2c_i801_exit(void)
848 {
849         pci_unregister_driver(&i801_driver);
850 }
851
852 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, "
853               "Jean Delvare <khali@linux-fr.org>");
854 MODULE_DESCRIPTION("I801 SMBus driver");
855 MODULE_LICENSE("GPL");
856
857 module_init(i2c_i801_init);
858 module_exit(i2c_i801_exit);