2 * Maple (970 eval board) setup code
4 * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
16 #include <linux/config.h>
17 #include <linux/init.h>
18 #include <linux/errno.h>
19 #include <linux/sched.h>
20 #include <linux/kernel.h>
22 #include <linux/stddef.h>
23 #include <linux/unistd.h>
24 #include <linux/ptrace.h>
25 #include <linux/slab.h>
26 #include <linux/user.h>
27 #include <linux/a.out.h>
28 #include <linux/tty.h>
29 #include <linux/string.h>
30 #include <linux/delay.h>
31 #include <linux/ioport.h>
32 #include <linux/major.h>
33 #include <linux/initrd.h>
34 #include <linux/vt_kern.h>
35 #include <linux/console.h>
36 #include <linux/ide.h>
37 #include <linux/pci.h>
38 #include <linux/adb.h>
39 #include <linux/cuda.h>
40 #include <linux/pmu.h>
41 #include <linux/irq.h>
42 #include <linux/seq_file.h>
43 #include <linux/root_dev.h>
44 #include <linux/serial.h>
45 #include <linux/smp.h>
47 #include <asm/processor.h>
48 #include <asm/sections.h>
50 #include <asm/system.h>
51 #include <asm/pgtable.h>
52 #include <asm/bitops.h>
54 #include <asm/pci-bridge.h>
55 #include <asm/iommu.h>
56 #include <asm/machdep.h>
58 #include <asm/cputable.h>
60 #include <asm/of_device.h>
68 #define DBG(fmt...) udbg_printf(fmt)
73 extern void generic_find_legacy_serial_ports(u64 *physport,
74 unsigned int *default_speed);
76 static void maple_restart(char *cmd)
78 unsigned int maple_nvram_base;
79 unsigned int maple_nvram_offset;
80 unsigned int maple_nvram_command;
81 struct device_node *rtcs;
83 /* find NVRAM device */
84 rtcs = find_compatible_devices("nvram", "AMD8111");
85 if (rtcs && rtcs->addrs) {
86 maple_nvram_base = rtcs->addrs[0].address;
88 printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
89 printk(KERN_EMERG "Maple: Manual Restart Required\n");
93 /* find service processor device */
94 rtcs = find_devices("service-processor");
96 printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
97 printk(KERN_EMERG "Maple: Manual Restart Required\n");
100 maple_nvram_offset = *(unsigned int*) get_property(rtcs,
101 "restart-addr", NULL);
102 maple_nvram_command = *(unsigned int*) get_property(rtcs,
103 "restart-value", NULL);
106 outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
110 static void maple_power_off(void)
112 unsigned int maple_nvram_base;
113 unsigned int maple_nvram_offset;
114 unsigned int maple_nvram_command;
115 struct device_node *rtcs;
117 /* find NVRAM device */
118 rtcs = find_compatible_devices("nvram", "AMD8111");
119 if (rtcs && rtcs->addrs) {
120 maple_nvram_base = rtcs->addrs[0].address;
122 printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
123 printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
127 /* find service processor device */
128 rtcs = find_devices("service-processor");
130 printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
131 printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
134 maple_nvram_offset = *(unsigned int*) get_property(rtcs,
135 "power-off-addr", NULL);
136 maple_nvram_command = *(unsigned int*) get_property(rtcs,
137 "power-off-value", NULL);
140 outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
144 static void maple_halt(void)
150 struct smp_ops_t maple_smp_ops = {
151 .probe = smp_mpic_probe,
152 .message_pass = smp_mpic_message_pass,
153 .kick_cpu = smp_generic_kick_cpu,
154 .setup_cpu = smp_mpic_setup_cpu,
155 .give_timebase = smp_generic_give_timebase,
156 .take_timebase = smp_generic_take_timebase,
158 #endif /* CONFIG_SMP */
160 void __init maple_setup_arch(void)
162 /* init to some ~sane value until calibrate_delay() runs */
163 loops_per_jiffy = 50000000;
165 /* Setup SMP callback */
167 smp_ops = &maple_smp_ops;
169 /* Lookup PCI hosts */
172 #ifdef CONFIG_DUMMY_CONSOLE
173 conswitchp = &dummy_con;
176 printk(KERN_INFO "Using native/NAP idle loop\n");
180 * Early initialization.
182 static void __init maple_init_early(void)
184 unsigned int default_speed;
187 DBG(" -> maple_init_early\n");
189 /* Initialize hash table, from now on, we can take hash faults
194 /* Find the serial port */
195 generic_find_legacy_serial_ports(&physport, &default_speed);
197 DBG("phys port addr: %lx\n", (long)physport);
201 /* Map the uart for udbg. */
202 comport = (void *)ioremap(physport, 16);
203 udbg_init_uart(comport, default_speed);
205 DBG("Hello World !\n");
208 /* Setup interrupt mapping options */
209 ppc64_interrupt_controller = IC_OPEN_PIC;
211 iommu_init_early_u3();
213 DBG(" <- maple_init_early\n");
217 static __init void maple_init_IRQ(void)
219 struct device_node *root;
220 unsigned int *opprop;
221 unsigned long opic_addr;
223 unsigned char senses[128];
226 DBG(" -> maple_init_IRQ\n");
228 /* XXX: Non standard, replace that with a proper openpic/mpic node
229 * in the device-tree. Find the Open PIC if present */
230 root = of_find_node_by_path("/");
231 opprop = (unsigned int *) get_property(root,
232 "platform-open-pic", NULL);
234 panic("OpenPIC not found !\n");
236 n = prom_n_addr_cells(root);
237 for (opic_addr = 0; n > 0; --n)
238 opic_addr = (opic_addr << 32) + *opprop++;
241 /* Obtain sense values from device-tree */
242 prom_get_irq_senses(senses, 0, 128);
244 mpic = mpic_alloc(opic_addr,
245 MPIC_PRIMARY | MPIC_BIG_ENDIAN |
246 MPIC_BROKEN_U3 | MPIC_WANTS_RESET,
247 0, 0, 128, 128, senses, 128, "U3-MPIC");
248 BUG_ON(mpic == NULL);
251 DBG(" <- maple_init_IRQ\n");
254 static void __init maple_progress(char *s, unsigned short hex)
256 printk("*** %04x : %s\n", hex, s ? s : "");
261 * Called very early, MMU is off, device-tree isn't unflattened
263 static int __init maple_probe(int platform)
265 if (platform != PLATFORM_MAPLE)
268 * On U3, the DART (iommu) must be allocated now since it
269 * has an impact on htab_initialize (due to the large page it
270 * occupies having to be broken up so the DART itself is not
271 * part of the cacheable linar mapping
273 alloc_u3_dart_table();
278 struct machdep_calls __initdata maple_md = {
279 .probe = maple_probe,
280 .setup_arch = maple_setup_arch,
281 .init_early = maple_init_early,
282 .init_IRQ = maple_init_IRQ,
283 .get_irq = mpic_get_irq,
284 .pcibios_fixup = maple_pcibios_fixup,
285 .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
286 .restart = maple_restart,
287 .power_off = maple_power_off,
289 .get_boot_time = maple_get_boot_time,
290 .set_rtc_time = maple_set_rtc_time,
291 .get_rtc_time = maple_get_rtc_time,
292 .calibrate_decr = generic_calibrate_decr,
293 .progress = maple_progress,
294 .idle_loop = native_idle,