git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-s3c2410.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * USB Bus Glue for Samsung S3C2410
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Rusell King et al.
  12  *
  13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  14  *      by Ben Dooks, <ben@simtec.co.uk>
  15  *      Copyright (C) 2004 Simtec Electronics
  16  *
  17  * Thanks to basprog@mail.ru for updates to newer kernels
  18  *
  19  * This file is licenced under the GPL.
  20 */
  21
  22 #include <linux/platform_device.h>
  23 #include <linux/clk.h>
  24
  25 #include <asm/hardware.h>
  26 #include <asm/arch/usb-control.h>
  27
  28 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
  29
  30 /* clock device associated with the hcd */
  31
  32 static struct clk *clk;
  33
  34 /* forward definitions */
  35
  36 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
  37
  38 /* conversion functions */
  39
  40 struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
  41 {
  42         return hcd->self.controller->platform_data;
  43 }
  44
  45 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
  46 {
  47         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  48
  49         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
  50         clk_enable(clk);
  51
  52         if (info != NULL) {
  53                 info->hcd       = hcd;
  54                 info->report_oc = s3c2410_hcd_oc;
  55
  56                 if (info->enable_oc != NULL) {
  57                         (info->enable_oc)(info, 1);
  58                 }
  59         }
  60 }
  61
  62 static void s3c2410_stop_hc(struct platform_device *dev)
  63 {
  64         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  65
  66         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
  67
  68         if (info != NULL) {
  69                 info->report_oc = NULL;
  70                 info->hcd       = NULL;
  71
  72                 if (info->enable_oc != NULL) {
  73                         (info->enable_oc)(info, 0);
  74                 }
  75         }
  76
  77         clk_disable(clk);
  78 }
  79
  80 /* ohci_s3c2410_hub_status_data
  81  *
  82  * update the status data from the hub with anything that
  83  * has been detected by our system
  84 */
  85
  86 static int
  87 ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
  88 {
  89         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
  90         struct s3c2410_hcd_port *port;
  91         int orig;
  92         int portno;
  93
  94         orig  = ohci_hub_status_data (hcd, buf);
  95
  96         if (info == NULL)
  97                 return orig;
  98
  99         port = &info->port[0];
 100
 101         /* mark any changed port as changed */
 102
 103         for (portno = 0; portno < 2; port++, portno++) {
 104                 if (port->oc_changed == 1 &&
 105                     port->flags & S3C_HCDFLG_USED) {
 106                         dev_dbg(hcd->self.controller,
 107                                 "oc change on port %d\n", portno);
 108
 109                         if (orig < 1)
 110                                 orig = 1;
 111
 112                         buf[0] |= 1<<(portno+1);
 113                 }
 114         }
 115
 116         return orig;
 117 }
 118
 119 /* s3c2410_usb_set_power
 120  *
 121  * configure the power on a port, by calling the platform device
 122  * routine registered with the platform device
 123 */
 124
 125 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 126                                   int port, int to)
 127 {
 128         if (info == NULL)
 129                 return;
 130
 131         if (info->power_control != NULL) {
 132                 info->port[port-1].power = to;
 133                 (info->power_control)(port-1, to);
 134         }
 135 }
 136
 137 /* ohci_s3c2410_hub_control
 138  *
 139  * look at control requests to the hub, and see if we need
 140  * to take any action or over-ride the results from the
 141  * request.
 142 */
 143
 144 static int ohci_s3c2410_hub_control (
 145         struct usb_hcd  *hcd,
 146         u16             typeReq,
 147         u16             wValue,
 148         u16             wIndex,
 149         char            *buf,
 150         u16             wLength)
 151 {
 152         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 153         struct usb_hub_descriptor *desc;
 154         int ret = -EINVAL;
 155         u32 *data = (u32 *)buf;
 156
 157         dev_dbg(hcd->self.controller,
 158                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 159                 hcd, typeReq, wValue, wIndex, buf, wLength);
 160
 161         /* if we are only an humble host without any special capabilites
 162          * process the request straight away and exit */
 163
 164         if (info == NULL) {
 165                 ret = ohci_hub_control(hcd, typeReq, wValue,
 166                                        wIndex, buf, wLength);
 167                 goto out;
 168         }
 169
 170         /* check the request to see if it needs handling */
 171
 172         switch (typeReq) {
 173         case SetPortFeature:
 174                 if (wValue == USB_PORT_FEAT_POWER) {
 175                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
 176                         s3c2410_usb_set_power(info, wIndex, 1);
 177                         goto out;
 178                 }
 179                 break;
 180
 181         case ClearPortFeature:
 182                 switch (wValue) {
 183                 case USB_PORT_FEAT_C_OVER_CURRENT:
 184                         dev_dbg(hcd->self.controller,
 185                                 "ClearPortFeature: C_OVER_CURRENT\n");
 186
 187                         if (valid_port(wIndex)) {
 188                                 info->port[wIndex-1].oc_changed = 0;
 189                                 info->port[wIndex-1].oc_status = 0;
 190                         }
 191
 192                         goto out;
 193
 194                 case USB_PORT_FEAT_OVER_CURRENT:
 195                         dev_dbg(hcd->self.controller,
 196                                 "ClearPortFeature: OVER_CURRENT\n");
 197
 198                         if (valid_port(wIndex)) {
 199                                 info->port[wIndex-1].oc_status = 0;
 200                         }
 201
 202                         goto out;
 203
 204                 case USB_PORT_FEAT_POWER:
 205                         dev_dbg(hcd->self.controller,
 206                                 "ClearPortFeature: POWER\n");
 207
 208                         if (valid_port(wIndex)) {
 209                                 s3c2410_usb_set_power(info, wIndex, 0);
 210                                 return 0;
 211                         }
 212                 }
 213                 break;
 214         }
 215
 216         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 217         if (ret)
 218                 goto out;
 219
 220         switch (typeReq) {
 221         case GetHubDescriptor:
 222
 223                 /* update the hub's descriptor */
 224
 225                 desc = (struct usb_hub_descriptor *)buf;
 226
 227                 if (info->power_control == NULL)
 228                         return ret;
 229
 230                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
 231                         desc->wHubCharacteristics);
 232
 233                 /* remove the old configurations for power-switching, and
 234                  * over-current protection, and insert our new configuration
 235                  */
 236
 237                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
 238                 desc->wHubCharacteristics |= cpu_to_le16(0x0001);
 239
 240                 if (info->enable_oc) {
 241                         desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
 242                         desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
 243                 }
 244
 245                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
 246                         desc->wHubCharacteristics);
 247
 248                 return ret;
 249
 250         case GetPortStatus:
 251                 /* check port status */
 252
 253                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 254
 255                 if (valid_port(wIndex)) {
 256                         if (info->port[wIndex-1].oc_changed) {
 257                                 *data |= cpu_to_le32(RH_PS_OCIC);
 258                         }
 259
 260                         if (info->port[wIndex-1].oc_status) {
 261                                 *data |= cpu_to_le32(RH_PS_POCI);
 262                         }
 263                 }
 264         }
 265
 266  out:
 267         return ret;
 268 }
 269
 270 /* s3c2410_hcd_oc
 271  *
 272  * handle an over-current report
 273 */
 274
 275 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
 276 {
 277         struct s3c2410_hcd_port *port;
 278         struct usb_hcd *hcd;
 279         unsigned long flags;
 280         int portno;
 281
 282         if (info == NULL)
 283                 return;
 284
 285         port = &info->port[0];
 286         hcd = info->hcd;
 287
 288         local_irq_save(flags);
 289
 290         for (portno = 0; portno < 2; port++, portno++) {
 291                 if (port_oc & (1<<portno) &&
 292                     port->flags & S3C_HCDFLG_USED) {
 293                         port->oc_status = 1;
 294                         port->oc_changed = 1;
 295
 296                         /* ok, once over-current is detected,
 297                            the port needs to be powered down */
 298                         s3c2410_usb_set_power(info, portno+1, 0);
 299                 }
 300         }
 301
 302         local_irq_restore(flags);
 303 }
 304
 305 /* may be called without controller electrically present */
 306 /* may be called with controller, bus, and devices active */
 307
 308 /*
 309  * usb_hcd_s3c2410_remove - shutdown processing for HCD
 310  * @dev: USB Host Controller being removed
 311  * Context: !in_interrupt()
 312  *
 313  * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
 314  * the HCD's stop() method.  It is always called from a thread
 315  * context, normally "rmmod", "apmd", or something similar.
 316  *
 317 */
 318
 319 void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 320 {
 321         usb_remove_hcd(hcd);
 322         s3c2410_stop_hc(dev);
 323         iounmap(hcd->regs);
 324         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 325         usb_put_hcd(hcd);
 326 }
 327
 328 /**
 329  * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
 330  * Context: !in_interrupt()
 331  *
 332  * Allocates basic resources for this USB host controller, and
 333  * then invokes the start() method for the HCD associated with it
 334  * through the hotplug entry's driver_data.
 335  *
 336  */
 337 int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 338                            struct platform_device *dev)
 339 {
 340         struct usb_hcd *hcd = NULL;
 341         int retval;
 342
 343         s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
 344         s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
 345
 346         hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
 347         if (hcd == NULL)
 348                 return -ENOMEM;
 349
 350         hcd->rsrc_start = dev->resource[0].start;
 351         hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
 352
 353         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 354                 dev_err(&dev->dev, "request_mem_region failed");
 355                 retval = -EBUSY;
 356                 goto err0;
 357         }
 358
 359         clk = clk_get(NULL, "usb-host");
 360         if (IS_ERR(clk)) {
 361                 dev_err(&dev->dev, "cannot get usb-host clock\n");
 362                 retval = -ENOENT;
 363                 goto err1;
 364         }
 365
 366         s3c2410_start_hc(dev, hcd);
 367
 368         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 369         if (!hcd->regs) {
 370                 dev_err(&dev->dev, "ioremap failed\n");
 371                 retval = -ENOMEM;
 372                 goto err2;
 373         }
 374
 375         ohci_hcd_init(hcd_to_ohci(hcd));
 376
 377         retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
 378         if (retval != 0)
 379                 goto err2;
 380
 381         return 0;
 382
 383  err2:
 384         s3c2410_stop_hc(dev);
 385         iounmap(hcd->regs);
 386         clk_put(clk);
 387
 388  err1:
 389         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 390
 391  err0:
 392         usb_put_hcd(hcd);
 393         return retval;
 394 }
 395
 396 /*-------------------------------------------------------------------------*/
 397
 398 static int
 399 ohci_s3c2410_start (struct usb_hcd *hcd)
 400 {
 401         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 402         int ret;
 403
 404         if ((ret = ohci_init(ohci)) < 0)
 405                 return ret;
 406
 407         if ((ret = ohci_run (ohci)) < 0) {
 408                 err ("can't start %s", hcd->self.bus_name);
 409                 ohci_stop (hcd);
 410                 return ret;
 411         }
 412
 413         return 0;
 414 }
 415
 416
 417 static const struct hc_driver ohci_s3c2410_hc_driver = {
 418         .description =          hcd_name,
 419         .product_desc =         "S3C24XX OHCI",
 420         .hcd_priv_size =        sizeof(struct ohci_hcd),
 421
 422         /*
 423          * generic hardware linkage
 424          */
 425         .irq =                  ohci_irq,
 426         .flags =                HCD_USB11 | HCD_MEMORY,
 427
 428         /*
 429          * basic lifecycle operations
 430          */
 431         .start =                ohci_s3c2410_start,
 432         .stop =                 ohci_stop,
 433
 434         /*
 435          * managing i/o requests and associated device resources
 436          */
 437         .urb_enqueue =          ohci_urb_enqueue,
 438         .urb_dequeue =          ohci_urb_dequeue,
 439         .endpoint_disable =     ohci_endpoint_disable,
 440
 441         /*
 442          * scheduling support
 443          */
 444         .get_frame_number =     ohci_get_frame,
 445
 446         /*
 447          * root hub support
 448          */
 449         .hub_status_data =      ohci_s3c2410_hub_status_data,
 450         .hub_control =          ohci_s3c2410_hub_control,
 451 #ifdef  CONFIG_PM
 452         .bus_suspend =          ohci_bus_suspend,
 453         .bus_resume =           ohci_bus_resume,
 454 #endif
 455         .start_port_reset =     ohci_start_port_reset,
 456 };
 457
 458 /* device driver */
 459
 460 static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
 461 {
 462         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
 463 }
 464
 465 static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
 466 {
 467         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 468
 469         usb_hcd_s3c2410_remove(hcd, pdev);
 470         return 0;
 471 }
 472
 473 static struct platform_driver ohci_hcd_s3c2410_driver = {
 474         .probe          = ohci_hcd_s3c2410_drv_probe,
 475         .remove         = ohci_hcd_s3c2410_drv_remove,
 476         /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
 477         /*.resume       = ohci_hcd_s3c2410_drv_resume, */
 478         .driver         = {
 479                 .owner  = THIS_MODULE,
 480                 .name   = "s3c2410-ohci",
 481         },
 482 };
 483
 484 static int __init ohci_hcd_s3c2410_init (void)
 485 {
 486         return platform_driver_register(&ohci_hcd_s3c2410_driver);
 487 }
 488
 489 static void __exit ohci_hcd_s3c2410_cleanup (void)
 490 {
 491         platform_driver_unregister(&ohci_hcd_s3c2410_driver);
 492 }
 493
 494 module_init (ohci_hcd_s3c2410_init);
 495 module_exit (ohci_hcd_s3c2410_cleanup);