Staging: et131x: fix build failure
[linux-2.6] / drivers / char / vme_scc.c
1 /*
2  * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
3  * implementation.
4  * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
5  *
6  * Based on atari_SCC.c which was
7  *   Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
8  *   Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
9  *
10  * This file is subject to the terms and conditions of the GNU General Public
11  * License.  See the file COPYING in the main directory of this archive
12  * for more details.
13  *
14  */
15
16 #include <linux/module.h>
17 #include <linux/kdev_t.h>
18 #include <asm/io.h>
19 #include <linux/kernel.h>
20 #include <linux/ioport.h>
21 #include <linux/interrupt.h>
22 #include <linux/errno.h>
23 #include <linux/tty.h>
24 #include <linux/tty_flip.h>
25 #include <linux/mm.h>
26 #include <linux/serial.h>
27 #include <linux/fcntl.h>
28 #include <linux/major.h>
29 #include <linux/delay.h>
30 #include <linux/slab.h>
31 #include <linux/miscdevice.h>
32 #include <linux/console.h>
33 #include <linux/init.h>
34 #include <asm/setup.h>
35 #include <asm/bootinfo.h>
36
37 #ifdef CONFIG_MVME147_SCC
38 #include <asm/mvme147hw.h>
39 #endif
40 #ifdef CONFIG_MVME162_SCC
41 #include <asm/mvme16xhw.h>
42 #endif
43 #ifdef CONFIG_BVME6000_SCC
44 #include <asm/bvme6000hw.h>
45 #endif
46
47 #include <linux/generic_serial.h>
48 #include "scc.h"
49
50
51 #define CHANNEL_A       0
52 #define CHANNEL_B       1
53
54 #define SCC_MINOR_BASE  64
55
56 /* Shadows for all SCC write registers */
57 static unsigned char scc_shadow[2][16];
58
59 /* Location to access for SCC register access delay */
60 static volatile unsigned char *scc_del = NULL;
61
62 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
63 static unsigned char scc_last_status_reg[2];
64
65 /***************************** Prototypes *****************************/
66
67 /* Function prototypes */
68 static void scc_disable_tx_interrupts(void * ptr);
69 static void scc_enable_tx_interrupts(void * ptr);
70 static void scc_disable_rx_interrupts(void * ptr);
71 static void scc_enable_rx_interrupts(void * ptr);
72 static int  scc_carrier_raised(struct tty_port *port);
73 static void scc_shutdown_port(void * ptr);
74 static int scc_set_real_termios(void  *ptr);
75 static void scc_hungup(void  *ptr);
76 static void scc_close(void  *ptr);
77 static int scc_chars_in_buffer(void * ptr);
78 static int scc_open(struct tty_struct * tty, struct file * filp);
79 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
80                      unsigned int cmd, unsigned long arg);
81 static void scc_throttle(struct tty_struct *tty);
82 static void scc_unthrottle(struct tty_struct *tty);
83 static irqreturn_t scc_tx_int(int irq, void *data);
84 static irqreturn_t scc_rx_int(int irq, void *data);
85 static irqreturn_t scc_stat_int(int irq, void *data);
86 static irqreturn_t scc_spcond_int(int irq, void *data);
87 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
88 static int scc_break_ctl(struct tty_struct *tty, int break_state);
89
90 static struct tty_driver *scc_driver;
91
92 static struct scc_port scc_ports[2];
93
94 /*---------------------------------------------------------------------------
95  * Interface from generic_serial.c back here
96  *--------------------------------------------------------------------------*/
97
98 static struct real_driver scc_real_driver = {
99         scc_disable_tx_interrupts,
100         scc_enable_tx_interrupts,
101         scc_disable_rx_interrupts,
102         scc_enable_rx_interrupts,
103         scc_shutdown_port,
104         scc_set_real_termios,
105         scc_chars_in_buffer,
106         scc_close,
107         scc_hungup,
108         NULL
109 };
110
111
112 static const struct tty_operations scc_ops = {
113         .open   = scc_open,
114         .close = gs_close,
115         .write = gs_write,
116         .put_char = gs_put_char,
117         .flush_chars = gs_flush_chars,
118         .write_room = gs_write_room,
119         .chars_in_buffer = gs_chars_in_buffer,
120         .flush_buffer = gs_flush_buffer,
121         .ioctl = scc_ioctl,
122         .throttle = scc_throttle,
123         .unthrottle = scc_unthrottle,
124         .set_termios = gs_set_termios,
125         .stop = gs_stop,
126         .start = gs_start,
127         .hangup = gs_hangup,
128         .break_ctl = scc_break_ctl,
129 };
130
131 static const struct tty_port_operations scc_port_ops = {
132         .carrier_raised = scc_carrier_raised,
133 };
134
135 /*----------------------------------------------------------------------------
136  * vme_scc_init() and support functions
137  *---------------------------------------------------------------------------*/
138
139 static int scc_init_drivers(void)
140 {
141         int error;
142
143         scc_driver = alloc_tty_driver(2);
144         if (!scc_driver)
145                 return -ENOMEM;
146         scc_driver->owner = THIS_MODULE;
147         scc_driver->driver_name = "scc";
148         scc_driver->name = "ttyS";
149         scc_driver->major = TTY_MAJOR;
150         scc_driver->minor_start = SCC_MINOR_BASE;
151         scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
152         scc_driver->subtype = SERIAL_TYPE_NORMAL;
153         scc_driver->init_termios = tty_std_termios;
154         scc_driver->init_termios.c_cflag =
155           B9600 | CS8 | CREAD | HUPCL | CLOCAL;
156         scc_driver->init_termios.c_ispeed = 9600;
157         scc_driver->init_termios.c_ospeed = 9600;
158         scc_driver->flags = TTY_DRIVER_REAL_RAW;
159         tty_set_operations(scc_driver, &scc_ops);
160
161         if ((error = tty_register_driver(scc_driver))) {
162                 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
163                        error);
164                 put_tty_driver(scc_driver);
165                 return 1;
166         }
167
168         return 0;
169 }
170
171
172 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
173  */
174
175 static void scc_init_portstructs(void)
176 {
177         struct scc_port *port;
178         int i;
179
180         for (i = 0; i < 2; i++) {
181                 port = scc_ports + i;
182                 tty_port_init(&port->gs.port);
183                 port->gs.port.ops = &scc_port_ops;
184                 port->gs.magic = SCC_MAGIC;
185                 port->gs.close_delay = HZ/2;
186                 port->gs.closing_wait = 30 * HZ;
187                 port->gs.rd = &scc_real_driver;
188 #ifdef NEW_WRITE_LOCKING
189                 port->gs.port_write_mutex = MUTEX;
190 #endif
191                 init_waitqueue_head(&port->gs.port.open_wait);
192                 init_waitqueue_head(&port->gs.port.close_wait);
193         }
194 }
195
196
197 #ifdef CONFIG_MVME147_SCC
198 static int mvme147_scc_init(void)
199 {
200         struct scc_port *port;
201
202         printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
203         /* Init channel A */
204         port = &scc_ports[0];
205         port->channel = CHANNEL_A;
206         port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
207         port->datap = port->ctrlp + 1;
208         port->port_a = &scc_ports[0];
209         port->port_b = &scc_ports[1];
210         request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
211                             "SCC-A TX", port);
212         request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
213                             "SCC-A status", port);
214         request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
215                             "SCC-A RX", port);
216         request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
217                             "SCC-A special cond", port);
218         {
219                 SCC_ACCESS_INIT(port);
220
221                 /* disable interrupts for this channel */
222                 SCCwrite(INT_AND_DMA_REG, 0);
223                 /* Set the interrupt vector */
224                 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
225                 /* Interrupt parameters: vector includes status, status low */
226                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
227                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
228         }
229
230         /* Init channel B */
231         port = &scc_ports[1];
232         port->channel = CHANNEL_B;
233         port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
234         port->datap = port->ctrlp + 1;
235         port->port_a = &scc_ports[0];
236         port->port_b = &scc_ports[1];
237         request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
238                             "SCC-B TX", port);
239         request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
240                             "SCC-B status", port);
241         request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
242                             "SCC-B RX", port);
243         request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
244                             "SCC-B special cond", port);
245         {
246                 SCC_ACCESS_INIT(port);
247
248                 /* disable interrupts for this channel */
249                 SCCwrite(INT_AND_DMA_REG, 0);
250         }
251
252         /* Ensure interrupts are enabled in the PCC chip */
253         m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
254
255         /* Initialise the tty driver structures and register */
256         scc_init_portstructs();
257         scc_init_drivers();
258
259         return 0;
260 }
261 #endif
262
263
264 #ifdef CONFIG_MVME162_SCC
265 static int mvme162_scc_init(void)
266 {
267         struct scc_port *port;
268
269         if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
270                 return (-ENODEV);
271
272         printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
273         /* Init channel A */
274         port = &scc_ports[0];
275         port->channel = CHANNEL_A;
276         port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
277         port->datap = port->ctrlp + 2;
278         port->port_a = &scc_ports[0];
279         port->port_b = &scc_ports[1];
280         request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
281                             "SCC-A TX", port);
282         request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
283                             "SCC-A status", port);
284         request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
285                             "SCC-A RX", port);
286         request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
287                             "SCC-A special cond", port);
288         {
289                 SCC_ACCESS_INIT(port);
290
291                 /* disable interrupts for this channel */
292                 SCCwrite(INT_AND_DMA_REG, 0);
293                 /* Set the interrupt vector */
294                 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
295                 /* Interrupt parameters: vector includes status, status low */
296                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
297                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
298         }
299
300         /* Init channel B */
301         port = &scc_ports[1];
302         port->channel = CHANNEL_B;
303         port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
304         port->datap = port->ctrlp + 2;
305         port->port_a = &scc_ports[0];
306         port->port_b = &scc_ports[1];
307         request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
308                             "SCC-B TX", port);
309         request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
310                             "SCC-B status", port);
311         request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
312                             "SCC-B RX", port);
313         request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
314                             "SCC-B special cond", port);
315
316         {
317                 SCC_ACCESS_INIT(port);  /* Either channel will do */
318
319                 /* disable interrupts for this channel */
320                 SCCwrite(INT_AND_DMA_REG, 0);
321         }
322
323         /* Ensure interrupts are enabled in the MC2 chip */
324         *(volatile char *)0xfff4201d = 0x14;
325
326         /* Initialise the tty driver structures and register */
327         scc_init_portstructs();
328         scc_init_drivers();
329
330         return 0;
331 }
332 #endif
333
334
335 #ifdef CONFIG_BVME6000_SCC
336 static int bvme6000_scc_init(void)
337 {
338         struct scc_port *port;
339
340         printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
341         /* Init channel A */
342         port = &scc_ports[0];
343         port->channel = CHANNEL_A;
344         port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
345         port->datap = port->ctrlp + 4;
346         port->port_a = &scc_ports[0];
347         port->port_b = &scc_ports[1];
348         request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
349                             "SCC-A TX", port);
350         request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
351                             "SCC-A status", port);
352         request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
353                             "SCC-A RX", port);
354         request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
355                             "SCC-A special cond", port);
356         {
357                 SCC_ACCESS_INIT(port);
358
359                 /* disable interrupts for this channel */
360                 SCCwrite(INT_AND_DMA_REG, 0);
361                 /* Set the interrupt vector */
362                 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
363                 /* Interrupt parameters: vector includes status, status low */
364                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
365                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
366         }
367
368         /* Init channel B */
369         port = &scc_ports[1];
370         port->channel = CHANNEL_B;
371         port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
372         port->datap = port->ctrlp + 4;
373         port->port_a = &scc_ports[0];
374         port->port_b = &scc_ports[1];
375         request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
376                             "SCC-B TX", port);
377         request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
378                             "SCC-B status", port);
379         request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
380                             "SCC-B RX", port);
381         request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
382                             "SCC-B special cond", port);
383
384         {
385                 SCC_ACCESS_INIT(port);  /* Either channel will do */
386
387                 /* disable interrupts for this channel */
388                 SCCwrite(INT_AND_DMA_REG, 0);
389         }
390
391         /* Initialise the tty driver structures and register */
392         scc_init_portstructs();
393         scc_init_drivers();
394
395         return 0;
396 }
397 #endif
398
399
400 static int vme_scc_init(void)
401 {
402         int res = -ENODEV;
403
404 #ifdef CONFIG_MVME147_SCC
405         if (MACH_IS_MVME147)
406                 res = mvme147_scc_init();
407 #endif
408 #ifdef CONFIG_MVME162_SCC
409         if (MACH_IS_MVME16x)
410                 res = mvme162_scc_init();
411 #endif
412 #ifdef CONFIG_BVME6000_SCC
413         if (MACH_IS_BVME6000)
414                 res = bvme6000_scc_init();
415 #endif
416         return res;
417 }
418
419 module_init(vme_scc_init);
420
421
422 /*---------------------------------------------------------------------------
423  * Interrupt handlers
424  *--------------------------------------------------------------------------*/
425
426 static irqreturn_t scc_rx_int(int irq, void *data)
427 {
428         unsigned char   ch;
429         struct scc_port *port = data;
430         struct tty_struct *tty = port->gs.port.tty;
431         SCC_ACCESS_INIT(port);
432
433         ch = SCCread_NB(RX_DATA_REG);
434         if (!tty) {
435                 printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
436                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
437                 return IRQ_HANDLED;
438         }
439         tty_insert_flip_char(tty, ch, 0);
440
441         /* Check if another character is already ready; in that case, the
442          * spcond_int() function must be used, because this character may have an
443          * error condition that isn't signalled by the interrupt vector used!
444          */
445         if (SCCread(INT_PENDING_REG) &
446             (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
447                 scc_spcond_int (irq, data);
448                 return IRQ_HANDLED;
449         }
450
451         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
452
453         tty_flip_buffer_push(tty);
454         return IRQ_HANDLED;
455 }
456
457
458 static irqreturn_t scc_spcond_int(int irq, void *data)
459 {
460         struct scc_port *port = data;
461         struct tty_struct *tty = port->gs.port.tty;
462         unsigned char   stat, ch, err;
463         int             int_pending_mask = port->channel == CHANNEL_A ?
464                                            IPR_A_RX : IPR_B_RX;
465         SCC_ACCESS_INIT(port);
466         
467         if (!tty) {
468                 printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
469                 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
470                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
471                 return IRQ_HANDLED;
472         }
473         do {
474                 stat = SCCread(SPCOND_STATUS_REG);
475                 ch = SCCread_NB(RX_DATA_REG);
476
477                 if (stat & SCSR_RX_OVERRUN)
478                         err = TTY_OVERRUN;
479                 else if (stat & SCSR_PARITY_ERR)
480                         err = TTY_PARITY;
481                 else if (stat & SCSR_CRC_FRAME_ERR)
482                         err = TTY_FRAME;
483                 else
484                         err = 0;
485
486                 tty_insert_flip_char(tty, ch, err);
487
488                 /* ++TeSche: *All* errors have to be cleared manually,
489                  * else the condition persists for the next chars
490                  */
491                 if (err)
492                   SCCwrite(COMMAND_REG, CR_ERROR_RESET);
493
494         } while(SCCread(INT_PENDING_REG) & int_pending_mask);
495
496         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
497
498         tty_flip_buffer_push(tty);
499         return IRQ_HANDLED;
500 }
501
502
503 static irqreturn_t scc_tx_int(int irq, void *data)
504 {
505         struct scc_port *port = data;
506         SCC_ACCESS_INIT(port);
507
508         if (!port->gs.port.tty) {
509                 printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
510                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
511                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
512                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
513                 return IRQ_HANDLED;
514         }
515         while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
516                 if (port->x_char) {
517                         SCCwrite(TX_DATA_REG, port->x_char);
518                         port->x_char = 0;
519                 }
520                 else if ((port->gs.xmit_cnt <= 0) ||
521                          port->gs.port.tty->stopped ||
522                          port->gs.port.tty->hw_stopped)
523                         break;
524                 else {
525                         SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
526                         port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
527                         if (--port->gs.xmit_cnt <= 0)
528                                 break;
529                 }
530         }
531         if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped ||
532             port->gs.port.tty->hw_stopped) {
533                 /* disable tx interrupts */
534                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
535                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
536                 port->gs.port.flags &= ~GS_TX_INTEN;
537         }
538         if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
539                 tty_wakeup(port->gs.port.tty);
540
541         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
542         return IRQ_HANDLED;
543 }
544
545
546 static irqreturn_t scc_stat_int(int irq, void *data)
547 {
548         struct scc_port *port = data;
549         unsigned channel = port->channel;
550         unsigned char   last_sr, sr, changed;
551         SCC_ACCESS_INIT(port);
552
553         last_sr = scc_last_status_reg[channel];
554         sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
555         changed = last_sr ^ sr;
556
557         if (changed & SR_DCD) {
558                 port->c_dcd = !!(sr & SR_DCD);
559                 if (!(port->gs.port.flags & ASYNC_CHECK_CD))
560                         ;       /* Don't report DCD changes */
561                 else if (port->c_dcd) {
562                         wake_up_interruptible(&port->gs.port.open_wait);
563                 }
564                 else {
565                         if (port->gs.port.tty)
566                                 tty_hangup (port->gs.port.tty);
567                 }
568         }
569         SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
570         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
571         return IRQ_HANDLED;
572 }
573
574
575 /*---------------------------------------------------------------------------
576  * generic_serial.c callback funtions
577  *--------------------------------------------------------------------------*/
578
579 static void scc_disable_tx_interrupts(void *ptr)
580 {
581         struct scc_port *port = ptr;
582         unsigned long   flags;
583         SCC_ACCESS_INIT(port);
584
585         local_irq_save(flags);
586         SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
587         port->gs.port.flags &= ~GS_TX_INTEN;
588         local_irq_restore(flags);
589 }
590
591
592 static void scc_enable_tx_interrupts(void *ptr)
593 {
594         struct scc_port *port = ptr;
595         unsigned long   flags;
596         SCC_ACCESS_INIT(port);
597
598         local_irq_save(flags);
599         SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
600         /* restart the transmitter */
601         scc_tx_int (0, port);
602         local_irq_restore(flags);
603 }
604
605
606 static void scc_disable_rx_interrupts(void *ptr)
607 {
608         struct scc_port *port = ptr;
609         unsigned long   flags;
610         SCC_ACCESS_INIT(port);
611
612         local_irq_save(flags);
613         SCCmod(INT_AND_DMA_REG,
614             ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
615         local_irq_restore(flags);
616 }
617
618
619 static void scc_enable_rx_interrupts(void *ptr)
620 {
621         struct scc_port *port = ptr;
622         unsigned long   flags;
623         SCC_ACCESS_INIT(port);
624
625         local_irq_save(flags);
626         SCCmod(INT_AND_DMA_REG, 0xff,
627                 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
628         local_irq_restore(flags);
629 }
630
631
632 static int scc_carrier_raised(struct tty_port *port)
633 {
634         struct scc_port *sc = container_of(port, struct scc_port, gs.port);
635         unsigned channel = sc->channel;
636
637         return !!(scc_last_status_reg[channel] & SR_DCD);
638 }
639
640
641 static void scc_shutdown_port(void *ptr)
642 {
643         struct scc_port *port = ptr;
644
645         port->gs.port.flags &= ~ GS_ACTIVE;
646         if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
647                 scc_setsignals (port, 0, 0);
648         }
649 }
650
651
652 static int scc_set_real_termios (void *ptr)
653 {
654         /* the SCC has char sizes 5,7,6,8 in that order! */
655         static int chsize_map[4] = { 0, 2, 1, 3 };
656         unsigned cflag, baud, chsize, channel, brgval = 0;
657         unsigned long flags;
658         struct scc_port *port = ptr;
659         SCC_ACCESS_INIT(port);
660
661         if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
662
663         channel = port->channel;
664
665         if (channel == CHANNEL_A)
666                 return 0;               /* Settings controlled by boot PROM */
667
668         cflag  = port->gs.port.tty->termios->c_cflag;
669         baud = port->gs.baud;
670         chsize = (cflag & CSIZE) >> 4;
671
672         if (baud == 0) {
673                 /* speed == 0 -> drop DTR */
674                 local_irq_save(flags);
675                 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
676                 local_irq_restore(flags);
677                 return 0;
678         }
679         else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
680                  (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
681                  (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
682                 printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
683                 return 0;
684         }
685
686         if (cflag & CLOCAL)
687                 port->gs.port.flags &= ~ASYNC_CHECK_CD;
688         else
689                 port->gs.port.flags |= ASYNC_CHECK_CD;
690
691 #ifdef CONFIG_MVME147_SCC
692         if (MACH_IS_MVME147)
693                 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
694 #endif
695 #ifdef CONFIG_MVME162_SCC
696         if (MACH_IS_MVME16x)
697                 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
698 #endif
699 #ifdef CONFIG_BVME6000_SCC
700         if (MACH_IS_BVME6000)
701                 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
702 #endif
703         /* Now we have all parameters and can go to set them: */
704         local_irq_save(flags);
705
706         /* receiver's character size and auto-enables */
707         SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
708                         (chsize_map[chsize] << 6) |
709                         ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
710         /* parity and stop bits (both, Tx and Rx), clock mode never changes */
711         SCCmod (AUX1_CTRL_REG,
712                 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
713                 ((cflag & PARENB
714                   ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
715                   : A1CR_PARITY_NONE)
716                  | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
717         /* sender's character size, set DTR for valid baud rate */
718         SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
719         /* clock sources never change */
720         /* disable BRG before changing the value */
721         SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
722         /* BRG value */
723         SCCwrite(TIMER_LOW_REG, brgval & 0xff);
724         SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
725         /* BRG enable, and clock source never changes */
726         SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
727
728         local_irq_restore(flags);
729
730         return 0;
731 }
732
733
734 static int scc_chars_in_buffer (void *ptr)
735 {
736         struct scc_port *port = ptr;
737         SCC_ACCESS_INIT(port);
738
739         return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0  : 1;
740 }
741
742
743 /* Comment taken from sx.c (2.4.0):
744    I haven't the foggiest why the decrement use count has to happen
745    here. The whole linux serial drivers stuff needs to be redesigned.
746    My guess is that this is a hack to minimize the impact of a bug
747    elsewhere. Thinking about it some more. (try it sometime) Try
748    running minicom on a serial port that is driven by a modularized
749    driver. Have the modem hangup. Then remove the driver module. Then
750    exit minicom.  I expect an "oops".  -- REW */
751
752 static void scc_hungup(void *ptr)
753 {
754         scc_disable_tx_interrupts(ptr);
755         scc_disable_rx_interrupts(ptr);
756 }
757
758
759 static void scc_close(void *ptr)
760 {
761         scc_disable_tx_interrupts(ptr);
762         scc_disable_rx_interrupts(ptr);
763 }
764
765
766 /*---------------------------------------------------------------------------
767  * Internal support functions
768  *--------------------------------------------------------------------------*/
769
770 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
771 {
772         unsigned long flags;
773         unsigned char t;
774         SCC_ACCESS_INIT(port);
775
776         local_irq_save(flags);
777         t = SCCread(TX_CTRL_REG);
778         if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
779         if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
780         SCCwrite(TX_CTRL_REG, t);
781         local_irq_restore(flags);
782 }
783
784
785 static void scc_send_xchar(struct tty_struct *tty, char ch)
786 {
787         struct scc_port *port = tty->driver_data;
788
789         port->x_char = ch;
790         if (ch)
791                 scc_enable_tx_interrupts(port);
792 }
793
794
795 /*---------------------------------------------------------------------------
796  * Driver entrypoints referenced from above
797  *--------------------------------------------------------------------------*/
798
799 static int scc_open (struct tty_struct * tty, struct file * filp)
800 {
801         int line = tty->index;
802         int retval;
803         struct scc_port *port = &scc_ports[line];
804         int i, channel = port->channel;
805         unsigned long   flags;
806         SCC_ACCESS_INIT(port);
807 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
808         static const struct {
809                 unsigned reg, val;
810         } mvme_init_tab[] = {
811                 /* Values for MVME162 and MVME147 */
812                 /* no parity, 1 stop bit, async, 1:16 */
813                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
814                 /* parity error is special cond, ints disabled, no DMA */
815                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
816                 /* Rx 8 bits/char, no auto enable, Rx off */
817                 { RX_CTRL_REG, RCR_CHSIZE_8 },
818                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
819                 { TX_CTRL_REG, TCR_CHSIZE_8 },
820                 /* special features off */
821                 { AUX2_CTRL_REG, 0 },
822                 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
823                 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
824                 /* Start Rx */
825                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
826                 /* Start Tx */
827                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
828                 /* Ext/Stat ints: DCD only */
829                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
830                 /* Reset Ext/Stat ints */
831                 { COMMAND_REG, CR_EXTSTAT_RESET },
832                 /* ...again */
833                 { COMMAND_REG, CR_EXTSTAT_RESET },
834         };
835 #endif
836 #if defined(CONFIG_BVME6000_SCC)
837         static const struct {
838                 unsigned reg, val;
839         } bvme_init_tab[] = {
840                 /* Values for BVME6000 */
841                 /* no parity, 1 stop bit, async, 1:16 */
842                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
843                 /* parity error is special cond, ints disabled, no DMA */
844                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
845                 /* Rx 8 bits/char, no auto enable, Rx off */
846                 { RX_CTRL_REG, RCR_CHSIZE_8 },
847                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
848                 { TX_CTRL_REG, TCR_CHSIZE_8 },
849                 /* special features off */
850                 { AUX2_CTRL_REG, 0 },
851                 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
852                 { DPLL_CTRL_REG, DCR_BRG_ENAB },
853                 /* Start Rx */
854                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
855                 /* Start Tx */
856                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
857                 /* Ext/Stat ints: DCD only */
858                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
859                 /* Reset Ext/Stat ints */
860                 { COMMAND_REG, CR_EXTSTAT_RESET },
861                 /* ...again */
862                 { COMMAND_REG, CR_EXTSTAT_RESET },
863         };
864 #endif
865         if (!(port->gs.port.flags & ASYNC_INITIALIZED)) {
866                 local_irq_save(flags);
867 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
868                 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
869                         for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i)
870                                 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
871                 }
872 #endif
873 #if defined(CONFIG_BVME6000_SCC)
874                 if (MACH_IS_BVME6000) {
875                         for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i)
876                                 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
877                 }
878 #endif
879
880                 /* remember status register for detection of DCD and CTS changes */
881                 scc_last_status_reg[channel] = SCCread(STATUS_REG);
882
883                 port->c_dcd = 0;        /* Prevent initial 1->0 interrupt */
884                 scc_setsignals (port, 1,1);
885                 local_irq_restore(flags);
886         }
887
888         tty->driver_data = port;
889         port->gs.port.tty = tty;
890         port->gs.port.count++;
891         retval = gs_init_port(&port->gs);
892         if (retval) {
893                 port->gs.port.count--;
894                 return retval;
895         }
896         port->gs.port.flags |= GS_ACTIVE;
897         retval = gs_block_til_ready(port, filp);
898
899         if (retval) {
900                 port->gs.port.count--;
901                 return retval;
902         }
903
904         port->c_dcd = tty_port_carrier_raised(&port->gs.port);
905
906         scc_enable_rx_interrupts(port);
907
908         return 0;
909 }
910
911
912 static void scc_throttle (struct tty_struct * tty)
913 {
914         struct scc_port *port = tty->driver_data;
915         unsigned long   flags;
916         SCC_ACCESS_INIT(port);
917
918         if (tty->termios->c_cflag & CRTSCTS) {
919                 local_irq_save(flags);
920                 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
921                 local_irq_restore(flags);
922         }
923         if (I_IXOFF(tty))
924                 scc_send_xchar(tty, STOP_CHAR(tty));
925 }
926
927
928 static void scc_unthrottle (struct tty_struct * tty)
929 {
930         struct scc_port *port = tty->driver_data;
931         unsigned long   flags;
932         SCC_ACCESS_INIT(port);
933
934         if (tty->termios->c_cflag & CRTSCTS) {
935                 local_irq_save(flags);
936                 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
937                 local_irq_restore(flags);
938         }
939         if (I_IXOFF(tty))
940                 scc_send_xchar(tty, START_CHAR(tty));
941 }
942
943
944 static int scc_ioctl(struct tty_struct *tty, struct file *file,
945                      unsigned int cmd, unsigned long arg)
946 {
947         return -ENOIOCTLCMD;
948 }
949
950
951 static int scc_break_ctl(struct tty_struct *tty, int break_state)
952 {
953         struct scc_port *port = tty->driver_data;
954         unsigned long   flags;
955         SCC_ACCESS_INIT(port);
956
957         local_irq_save(flags);
958         SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, 
959                         break_state ? TCR_SEND_BREAK : 0);
960         local_irq_restore(flags);
961         return 0;
962 }
963
964
965 /*---------------------------------------------------------------------------
966  * Serial console stuff...
967  *--------------------------------------------------------------------------*/
968
969 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
970
971 static void scc_ch_write (char ch)
972 {
973         volatile char *p = NULL;
974         
975 #ifdef CONFIG_MVME147_SCC
976         if (MACH_IS_MVME147)
977                 p = (volatile char *)M147_SCC_A_ADDR;
978 #endif
979 #ifdef CONFIG_MVME162_SCC
980         if (MACH_IS_MVME16x)
981                 p = (volatile char *)MVME_SCC_A_ADDR;
982 #endif
983 #ifdef CONFIG_BVME6000_SCC
984         if (MACH_IS_BVME6000)
985                 p = (volatile char *)BVME_SCC_A_ADDR;
986 #endif
987
988         do {
989                 scc_delay();
990         }
991         while (!(*p & 4));
992         scc_delay();
993         *p = 8;
994         scc_delay();
995         *p = ch;
996 }
997
998 /* The console must be locked when we get here. */
999
1000 static void scc_console_write (struct console *co, const char *str, unsigned count)
1001 {
1002         unsigned long   flags;
1003
1004         local_irq_save(flags);
1005
1006         while (count--)
1007         {
1008                 if (*str == '\n')
1009                         scc_ch_write ('\r');
1010                 scc_ch_write (*str++);
1011         }
1012         local_irq_restore(flags);
1013 }
1014
1015 static struct tty_driver *scc_console_device(struct console *c, int *index)
1016 {
1017         *index = c->index;
1018         return scc_driver;
1019 }
1020
1021 static struct console sercons = {
1022         .name           = "ttyS",
1023         .write          = scc_console_write,
1024         .device         = scc_console_device,
1025         .flags          = CON_PRINTBUFFER,
1026         .index          = -1,
1027 };
1028
1029
1030 static int __init vme_scc_console_init(void)
1031 {
1032         if (vme_brdtype == VME_TYPE_MVME147 ||
1033                         vme_brdtype == VME_TYPE_MVME162 ||
1034                         vme_brdtype == VME_TYPE_MVME172 ||
1035                         vme_brdtype == VME_TYPE_BVME4000 ||
1036                         vme_brdtype == VME_TYPE_BVME6000)
1037                 register_console(&sercons);
1038         return 0;
1039 }
1040 console_initcall(vme_scc_console_init);