git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/mac_scsi.c

   1 /*
   2  * Generic Macintosh NCR5380 driver
   3  *
   4  * Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
   5  *
   6  * derived in part from:
   7  */
   8 /*
   9  * Generic Generic NCR5380 driver
  10  *
  11  * Copyright 1995, Russell King
  12  *
  13  * ALPHA RELEASE 1.
  14  *
  15  * For more information, please consult
  16  *
  17  * NCR 5380 Family
  18  * SCSI Protocol Controller
  19  * Databook
  20  *
  21  * NCR Microelectronics
  22  * 1635 Aeroplaza Drive
  23  * Colorado Springs, CO 80916
  24  * 1+ (719) 578-3400
  25  * 1+ (800) 334-5454
  26  */
  27
  28 /*
  29  * $Log: mac_NCR5380.c,v $
  30  */
  31
  32 #include <linux/types.h>
  33 #include <linux/stddef.h>
  34 #include <linux/ctype.h>
  35 #include <linux/delay.h>
  36
  37 #include <linux/module.h>
  38 #include <linux/signal.h>
  39 #include <linux/ioport.h>
  40 #include <linux/init.h>
  41 #include <linux/blkdev.h>
  42 #include <linux/interrupt.h>
  43
  44 #include <asm/io.h>
  45 #include <asm/irq.h>
  46 #include <asm/system.h>
  47
  48 #include <asm/macintosh.h>
  49 #include <asm/macints.h>
  50 #include <asm/machw.h>
  51 #include <asm/mac_via.h>
  52
  53 #include "scsi.h"
  54 #include <scsi/scsi_host.h>
  55 #include "mac_scsi.h"
  56 #include "NCR5380.h"
  57
  58 #if 0
  59 #define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION)
  60 #else
  61 #define NDEBUG (NDEBUG_ABORT)
  62 #endif
  63
  64 #define RESET_BOOT
  65 #define DRIVER_SETUP
  66
  67 extern void via_scsi_clear(void);
  68
  69 #ifdef RESET_BOOT
  70 static void mac_scsi_reset_boot(struct Scsi_Host *instance);
  71 #endif
  72
  73 static int setup_called = 0;
  74 static int setup_can_queue = -1;
  75 static int setup_cmd_per_lun = -1;
  76 static int setup_sg_tablesize = -1;
  77 static int setup_use_pdma = -1;
  78 #ifdef SUPPORT_TAGS
  79 static int setup_use_tagged_queuing = -1;
  80 #endif
  81 static int setup_hostid = -1;
  82
  83 /* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
  84  * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
  85  * need ten times the standard value... */
  86 #define TOSHIBA_DELAY
  87
  88 #ifdef TOSHIBA_DELAY
  89 #define AFTER_RESET_DELAY       (5*HZ/2)
  90 #else
  91 #define AFTER_RESET_DELAY       (HZ/2)
  92 #endif
  93
  94 static volatile unsigned char *mac_scsi_regp = NULL;
  95 static volatile unsigned char *mac_scsi_drq  = NULL;
  96 static volatile unsigned char *mac_scsi_nodrq = NULL;
  97
  98
  99 /*
 100  * NCR 5380 register access functions
 101  */
 102
 103 #if 0
 104 /* Debug versions */
 105 #define CTRL(p,v) (*ctrl = (v))
 106
 107 static char macscsi_read(struct Scsi_Host *instance, int reg)
 108 {
 109   int iobase = instance->io_port;
 110   int i;
 111   int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
 112
 113   CTRL(iobase, 0);
 114   i = in_8(iobase + (reg<<4));
 115   CTRL(iobase, 0x40);
 116
 117   return i;
 118 }
 119
 120 static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
 121 {
 122   int iobase = instance->io_port;
 123   int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
 124
 125   CTRL(iobase, 0);
 126   out_8(iobase + (reg<<4), value);
 127   CTRL(iobase, 0x40);
 128 }
 129 #else
 130
 131 /* Fast versions */
 132 static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg)
 133 {
 134   return in_8(instance->io_port + (reg<<4));
 135 }
 136
 137 static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value)
 138 {
 139   out_8(instance->io_port + (reg<<4), value);
 140 }
 141 #endif
 142
 143
 144 /*
 145  * Function : mac_scsi_setup(char *str)
 146  *
 147  * Purpose : booter command line initialization of the overrides array,
 148  *
 149  * Inputs : str - comma delimited list of options
 150  *
 151  */
 152
 153 static int __init mac_scsi_setup(char *str) {
 154 #ifdef DRIVER_SETUP
 155         int ints[7];
 156
 157         (void)get_options( str, ARRAY_SIZE(ints), ints);
 158
 159         if (setup_called++ || ints[0] < 1 || ints[0] > 6) {
 160             printk(KERN_WARNING "scsi: <mac5380>"
 161                 " Usage: mac5380=<can_queue>[,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>,<use_pdma>]\n");
 162             printk(KERN_ALERT "scsi: <mac5380> Bad Penguin parameters?\n");
 163             return 0;
 164         }
 165
 166         if (ints[0] >= 1) {
 167                 if (ints[1] > 0)
 168                         /* no limits on this, just > 0 */
 169                         setup_can_queue = ints[1];
 170         }
 171         if (ints[0] >= 2) {
 172                 if (ints[2] > 0)
 173                         setup_cmd_per_lun = ints[2];
 174         }
 175         if (ints[0] >= 3) {
 176                 if (ints[3] >= 0) {
 177                         setup_sg_tablesize = ints[3];
 178                         /* Must be <= SG_ALL (255) */
 179                         if (setup_sg_tablesize > SG_ALL)
 180                                 setup_sg_tablesize = SG_ALL;
 181                 }
 182         }
 183         if (ints[0] >= 4) {
 184                 /* Must be between 0 and 7 */
 185                 if (ints[4] >= 0 && ints[4] <= 7)
 186                         setup_hostid = ints[4];
 187                 else if (ints[4] > 7)
 188                         printk(KERN_WARNING "mac_scsi_setup: invalid host ID %d !\n", ints[4] );
 189         }
 190 #ifdef SUPPORT_TAGS
 191         if (ints[0] >= 5) {
 192                 if (ints[5] >= 0)
 193                         setup_use_tagged_queuing = !!ints[5];
 194         }
 195
 196         if (ints[0] == 6) {
 197             if (ints[6] >= 0)
 198                 setup_use_pdma = ints[6];
 199         }
 200 #else
 201         if (ints[0] == 5) {
 202             if (ints[5] >= 0)
 203                 setup_use_pdma = ints[5];
 204         }
 205 #endif /* SUPPORT_TAGS */
 206
 207 #endif /* DRIVER_SETUP */
 208         return 1;
 209 }
 210
 211 __setup("mac5380=", mac_scsi_setup);
 212
 213 /*
 214  * If you want to find the instance with (k)gdb ...
 215  */
 216 #if NDEBUG
 217 static struct Scsi_Host *default_instance;
 218 #endif
 219
 220 /*
 221  * Function : int macscsi_detect(struct scsi_host_template * tpnt)
 222  *
 223  * Purpose : initializes mac NCR5380 driver based on the
 224  *      command line / compile time port and irq definitions.
 225  *
 226  * Inputs : tpnt - template for this SCSI adapter.
 227  *
 228  * Returns : 1 if a host adapter was found, 0 if not.
 229  *
 230  */
 231
 232 int macscsi_detect(struct scsi_host_template * tpnt)
 233 {
 234     static int called = 0;
 235     int flags = 0;
 236     struct Scsi_Host *instance;
 237
 238     if (!MACH_IS_MAC || called)
 239         return( 0 );
 240
 241     if (macintosh_config->scsi_type != MAC_SCSI_OLD)
 242         return( 0 );
 243
 244     /* setup variables */
 245     tpnt->can_queue =
 246         (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
 247     tpnt->cmd_per_lun =
 248         (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
 249     tpnt->sg_tablesize =
 250         (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
 251
 252     if (setup_hostid >= 0)
 253         tpnt->this_id = setup_hostid;
 254     else {
 255         /* use 7 as default */
 256         tpnt->this_id = 7;
 257     }
 258
 259 #ifdef SUPPORT_TAGS
 260     if (setup_use_tagged_queuing < 0)
 261         setup_use_tagged_queuing = USE_TAGGED_QUEUING;
 262 #endif
 263
 264     /* Once we support multiple 5380s (e.g. DuoDock) we'll do
 265        something different here */
 266     instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
 267 #if NDEBUG
 268     default_instance = instance;
 269 #endif
 270
 271     if (macintosh_config->ident == MAC_MODEL_IIFX) {
 272         mac_scsi_regp  = via1+0x8000;
 273         mac_scsi_drq   = via1+0xE000;
 274         mac_scsi_nodrq = via1+0xC000;
 275         /* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */
 276         flags = FLAG_NO_PSEUDO_DMA;
 277     } else {
 278         mac_scsi_regp  = via1+0x10000;
 279         mac_scsi_drq   = via1+0x6000;
 280         mac_scsi_nodrq = via1+0x12000;
 281     }
 282
 283     if (! setup_use_pdma)
 284         flags = FLAG_NO_PSEUDO_DMA;
 285
 286     instance->io_port = (unsigned long) mac_scsi_regp;
 287     instance->irq = IRQ_MAC_SCSI;
 288
 289 #ifdef RESET_BOOT
 290     mac_scsi_reset_boot(instance);
 291 #endif
 292
 293     NCR5380_init(instance, flags);
 294
 295     instance->n_io_port = 255;
 296
 297     ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
 298
 299     if (instance->irq != SCSI_IRQ_NONE)
 300         if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW,
 301                 "ncr5380", instance)) {
 302             printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
 303                    instance->host_no, instance->irq);
 304             instance->irq = SCSI_IRQ_NONE;
 305         }
 306
 307     printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
 308     if (instance->irq == SCSI_IRQ_NONE)
 309         printk (KERN_INFO "s disabled");
 310     else
 311         printk (KERN_INFO " %d", instance->irq);
 312     printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
 313            instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
 314     printk(KERN_INFO "\nscsi%d:", instance->host_no);
 315     NCR5380_print_options(instance);
 316     printk("\n");
 317     called = 1;
 318     return 1;
 319 }
 320
 321 int macscsi_release (struct Scsi_Host *shpnt)
 322 {
 323         if (shpnt->irq != SCSI_IRQ_NONE)
 324                 free_irq (shpnt->irq, NCR5380_intr);
 325         NCR5380_exit(shpnt);
 326
 327         return 0;
 328 }
 329
 330 #ifdef RESET_BOOT
 331 /*
 332  * Our 'bus reset on boot' function
 333  */
 334
 335 static void mac_scsi_reset_boot(struct Scsi_Host *instance)
 336 {
 337         unsigned long end;
 338
 339         NCR5380_local_declare();
 340         NCR5380_setup(instance);
 341
 342         /*
 343          * Do a SCSI reset to clean up the bus during initialization. No messing
 344          * with the queues, interrupts, or locks necessary here.
 345          */
 346
 347         printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
 348
 349         /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
 350         disable_irq(IRQ_MAC_SCSI);
 351
 352         /* get in phase */
 353         NCR5380_write( TARGET_COMMAND_REG,
 354                       PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
 355
 356         /* assert RST */
 357         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
 358         /* The min. reset hold time is 25us, so 40us should be enough */
 359         udelay( 50 );
 360         /* reset RST and interrupt */
 361         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
 362         NCR5380_read( RESET_PARITY_INTERRUPT_REG );
 363
 364         for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
 365                 barrier();
 366
 367         /* switch on SCSI IRQ again */
 368         enable_irq(IRQ_MAC_SCSI);
 369
 370         printk(KERN_INFO " done\n" );
 371 }
 372 #endif
 373
 374 const char * macscsi_info (struct Scsi_Host *spnt) {
 375         return "";
 376 }
 377
 378 /*
 379    Pseudo-DMA: (Ove Edlund)
 380    The code attempts to catch bus errors that occur if one for example
 381    "trips over the cable".
 382    XXX: Since bus errors in the PDMA routines never happen on my
 383    computer, the bus error code is untested.
 384    If the code works as intended, a bus error results in Pseudo-DMA
 385    beeing disabled, meaning that the driver switches to slow handshake.
 386    If bus errors are NOT extremely rare, this has to be changed.
 387 */
 388
 389 #define CP_IO_TO_MEM(s,d,len)                           \
 390 __asm__ __volatile__                                    \
 391     ("    cmp.w  #4,%2\n"                               \
 392      "    bls    8f\n"                                  \
 393      "    move.w %1,%%d0\n"                             \
 394      "    neg.b  %%d0\n"                                \
 395      "    and.w  #3,%%d0\n"                             \
 396      "    sub.w  %%d0,%2\n"                             \
 397      "    bra    2f\n"                                  \
 398      " 1: move.b (%0),(%1)+\n"                          \
 399      " 2: dbf    %%d0,1b\n"                             \
 400      "    move.w %2,%%d0\n"                             \
 401      "    lsr.w  #5,%%d0\n"                             \
 402      "    bra    4f\n"                                  \
 403      " 3: move.l (%0),(%1)+\n"                          \
 404      "31: move.l (%0),(%1)+\n"                          \
 405      "32: move.l (%0),(%1)+\n"                          \
 406      "33: move.l (%0),(%1)+\n"                          \
 407      "34: move.l (%0),(%1)+\n"                          \
 408      "35: move.l (%0),(%1)+\n"                          \
 409      "36: move.l (%0),(%1)+\n"                          \
 410      "37: move.l (%0),(%1)+\n"                          \
 411      " 4: dbf    %%d0,3b\n"                             \
 412      "    move.w %2,%%d0\n"                             \
 413      "    lsr.w  #2,%%d0\n"                             \
 414      "    and.w  #7,%%d0\n"                             \
 415      "    bra    6f\n"                                  \
 416      " 5: move.l (%0),(%1)+\n"                          \
 417      " 6: dbf    %%d0,5b\n"                             \
 418      "    and.w  #3,%2\n"                               \
 419      "    bra    8f\n"                                  \
 420      " 7: move.b (%0),(%1)+\n"                          \
 421      " 8: dbf    %2,7b\n"                               \
 422      "    moveq.l #0, %2\n"                             \
 423      " 9: \n"                                           \
 424      ".section .fixup,\"ax\"\n"                         \
 425      "    .even\n"                                      \
 426      "90: moveq.l #1, %2\n"                             \
 427      "    jra 9b\n"                                     \
 428      ".previous\n"                                      \
 429      ".section __ex_table,\"a\"\n"                      \
 430      "   .align 4\n"                                    \
 431      "   .long  1b,90b\n"                               \
 432      "   .long  3b,90b\n"                               \
 433      "   .long 31b,90b\n"                               \
 434      "   .long 32b,90b\n"                               \
 435      "   .long 33b,90b\n"                               \
 436      "   .long 34b,90b\n"                               \
 437      "   .long 35b,90b\n"                               \
 438      "   .long 36b,90b\n"                               \
 439      "   .long 37b,90b\n"                               \
 440      "   .long  5b,90b\n"                               \
 441      "   .long  7b,90b\n"                               \
 442      ".previous"                                        \
 443      : "=a"(s), "=a"(d), "=d"(len)                      \
 444      : "0"(s), "1"(d), "2"(len)                         \
 445      : "d0")
 446
 447
 448 static int macscsi_pread (struct Scsi_Host *instance,
 449                           unsigned char *dst, int len)
 450 {
 451    unsigned char *d;
 452    volatile unsigned char *s;
 453
 454    NCR5380_local_declare();
 455    NCR5380_setup(instance);
 456
 457    s = mac_scsi_drq+0x60;
 458    d = dst;
 459
 460 /* These conditions are derived from MacOS */
 461
 462    while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
 463          && !(NCR5380_read(STATUS_REG) & SR_REQ))
 464       ;
 465    if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
 466          && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
 467       printk(KERN_ERR "Error in macscsi_pread\n");
 468       return -1;
 469    }
 470
 471    CP_IO_TO_MEM(s, d, len);
 472
 473    if (len != 0) {
 474       printk(KERN_NOTICE "Bus error in macscsi_pread\n");
 475       return -1;
 476    }
 477
 478    return 0;
 479 }
 480
 481
 482 #define CP_MEM_TO_IO(s,d,len)                           \
 483 __asm__ __volatile__                                    \
 484     ("    cmp.w  #4,%2\n"                               \
 485      "    bls    8f\n"                                  \
 486      "    move.w %0,%%d0\n"                             \
 487      "    neg.b  %%d0\n"                                \
 488      "    and.w  #3,%%d0\n"                             \
 489      "    sub.w  %%d0,%2\n"                             \
 490      "    bra    2f\n"                                  \
 491      " 1: move.b (%0)+,(%1)\n"                          \
 492      " 2: dbf    %%d0,1b\n"                             \
 493      "    move.w %2,%%d0\n"                             \
 494      "    lsr.w  #5,%%d0\n"                             \
 495      "    bra    4f\n"                                  \
 496      " 3: move.l (%0)+,(%1)\n"                          \
 497      "31: move.l (%0)+,(%1)\n"                          \
 498      "32: move.l (%0)+,(%1)\n"                          \
 499      "33: move.l (%0)+,(%1)\n"                          \
 500      "34: move.l (%0)+,(%1)\n"                          \
 501      "35: move.l (%0)+,(%1)\n"                          \
 502      "36: move.l (%0)+,(%1)\n"                          \
 503      "37: move.l (%0)+,(%1)\n"                          \
 504      " 4: dbf    %%d0,3b\n"                             \
 505      "    move.w %2,%%d0\n"                             \
 506      "    lsr.w  #2,%%d0\n"                             \
 507      "    and.w  #7,%%d0\n"                             \
 508      "    bra    6f\n"                                  \
 509      " 5: move.l (%0)+,(%1)\n"                          \
 510      " 6: dbf    %%d0,5b\n"                             \
 511      "    and.w  #3,%2\n"                               \
 512      "    bra    8f\n"                                  \
 513      " 7: move.b (%0)+,(%1)\n"                          \
 514      " 8: dbf    %2,7b\n"                               \
 515      "    moveq.l #0, %2\n"                             \
 516      " 9: \n"                                           \
 517      ".section .fixup,\"ax\"\n"                         \
 518      "    .even\n"                                      \
 519      "90: moveq.l #1, %2\n"                             \
 520      "    jra 9b\n"                                     \
 521      ".previous\n"                                      \
 522      ".section __ex_table,\"a\"\n"                      \
 523      "   .align 4\n"                                    \
 524      "   .long  1b,90b\n"                               \
 525      "   .long  3b,90b\n"                               \
 526      "   .long 31b,90b\n"                               \
 527      "   .long 32b,90b\n"                               \
 528      "   .long 33b,90b\n"                               \
 529      "   .long 34b,90b\n"                               \
 530      "   .long 35b,90b\n"                               \
 531      "   .long 36b,90b\n"                               \
 532      "   .long 37b,90b\n"                               \
 533      "   .long  5b,90b\n"                               \
 534      "   .long  7b,90b\n"                               \
 535      ".previous"                                        \
 536      : "=a"(s), "=a"(d), "=d"(len)                      \
 537      : "0"(s), "1"(d), "2"(len)                         \
 538      : "d0")
 539
 540 static int macscsi_pwrite (struct Scsi_Host *instance,
 541                                   unsigned char *src, int len)
 542 {
 543    unsigned char *s;
 544    volatile unsigned char *d;
 545
 546    NCR5380_local_declare();
 547    NCR5380_setup(instance);
 548
 549    s = src;
 550    d = mac_scsi_drq;
 551
 552 /* These conditions are derived from MacOS */
 553
 554    while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
 555          && (!(NCR5380_read(STATUS_REG) & SR_REQ)
 556             || (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
 557       ;
 558    if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
 559       printk(KERN_ERR "Error in macscsi_pwrite\n");
 560       return -1;
 561    }
 562
 563    CP_MEM_TO_IO(s, d, len);
 564
 565    if (len != 0) {
 566       printk(KERN_NOTICE "Bus error in macscsi_pwrite\n");
 567       return -1;
 568    }
 569
 570    return 0;
 571 }
 572
 573
 574 /* These control the behaviour of the generic 5380 core */
 575 #define AUTOSENSE
 576 #define PSEUDO_DMA
 577
 578 #include "NCR5380.c"
 579
 580 static struct scsi_host_template driver_template = {
 581         .proc_name                      = "Mac5380",
 582         .proc_info                      = macscsi_proc_info,
 583         .name                           = "Macintosh NCR5380 SCSI",
 584         .detect                         = macscsi_detect,
 585         .release                        = macscsi_release,
 586         .info                           = macscsi_info,
 587         .queuecommand                   = macscsi_queue_command,
 588         .eh_abort_handler               = macscsi_abort,
 589         .eh_bus_reset_handler           = macscsi_bus_reset,
 590         .can_queue                      = CAN_QUEUE,
 591         .this_id                        = 7,
 592         .sg_tablesize                   = SG_ALL,
 593         .cmd_per_lun                    = CMD_PER_LUN,
 594         .unchecked_isa_dma              = 0,
 595         .use_clustering                 = DISABLE_CLUSTERING
 596 };
 597
 598
 599 #include "scsi_module.c"