5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/config.h>
29 #include <linux/delay.h>
30 #include <linux/module.h>
31 #include <linux/moduleparam.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
45 static void boot_msp34xx(struct bttv *btv, int pin);
46 static void boot_bt832(struct bttv *btv);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
54 static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
55 static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
56 static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
58 static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
60 static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
61 static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
62 static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
63 static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
64 static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
65 static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
66 static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
67 static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
68 static void rv605_muxsel(struct bttv *btv, unsigned int input);
69 static void eagle_muxsel(struct bttv *btv, unsigned int input);
70 static void xguard_muxsel(struct bttv *btv, unsigned int input);
71 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
72 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
74 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
76 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
77 static void picolo_tetra_init(struct bttv *btv);
79 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
80 static void tibetCS16_init(struct bttv *btv);
82 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
83 static void kodicom4400r_init(struct bttv *btv);
85 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
86 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
88 static int terratec_active_radio_upgrade(struct bttv *btv);
89 static int tea5757_read(struct bttv *btv);
90 static int tea5757_write(struct bttv *btv, int value);
91 static void identify_by_eeprom(struct bttv *btv,
92 unsigned char eeprom_data[256]);
93 static int __devinit pvr_boot(struct bttv *btv);
95 /* config variables */
96 static unsigned int triton1;
97 static unsigned int vsfx;
98 static unsigned int latency = UNSET;
101 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
104 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
105 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
106 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
108 static unsigned int autoload = 1;
110 static unsigned int autoload;
112 static unsigned int gpiomask = UNSET;
113 static unsigned int audioall = UNSET;
114 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
117 module_param(triton1, int, 0444);
118 module_param(vsfx, int, 0444);
119 module_param(no_overlay, int, 0444);
120 module_param(latency, int, 0444);
121 module_param(gpiomask, int, 0444);
122 module_param(audioall, int, 0444);
123 module_param(autoload, int, 0444);
125 module_param_array(card, int, NULL, 0444);
126 module_param_array(pll, int, NULL, 0444);
127 module_param_array(tuner, int, NULL, 0444);
128 module_param_array(svhs, int, NULL, 0444);
129 module_param_array(remote, int, NULL, 0444);
130 module_param_array(audiomux, int, NULL, 0444);
132 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
133 "[enable bug compatibility for triton1 + others]");
134 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
135 "[yet another chipset flaw workaround]");
136 MODULE_PARM_DESC(latency,"pci latency timer");
137 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
138 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
139 MODULE_PARM_DESC(tuner,"specify installed tuner type");
140 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
141 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
142 " [some VIA/SIS chipsets are known to have problem with overlay]");
144 /* ----------------------------------------------------------------------- */
145 /* list of card IDs for bt878+ cards */
151 } cards[] __devinitdata = {
152 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
153 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
154 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
155 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
156 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
157 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
158 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
159 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
160 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
162 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
163 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
165 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
166 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
167 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
168 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
170 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
171 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
172 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
173 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
175 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
176 /* some cards ship with byteswapped IDs ... */
177 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
179 /* this seems to happen as well ... */
180 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
182 { 0x3000121a, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
183 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
184 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
186 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
187 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
188 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
189 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
190 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
191 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
192 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
194 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
195 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
196 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
197 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
198 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
200 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
201 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
202 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
203 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
205 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
206 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
207 /* clashes with FlyVideo
208 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
209 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
210 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
211 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
212 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
214 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
216 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
218 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
220 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
221 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
222 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
223 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
224 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
226 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
227 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
228 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
229 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
231 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
232 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
233 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
234 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
236 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
237 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
241 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
245 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
262 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
263 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
265 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
266 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
267 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
268 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
269 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
270 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
272 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
273 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
275 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
276 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
277 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
278 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
279 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
280 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
281 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
282 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
283 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
285 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
286 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
288 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
289 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
290 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
291 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
293 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
295 /* likely broken, vendor id doesn't match the other magic views ...
296 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
298 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
299 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
301 /* DVB cards (using pci function .1 for mpeg data xfer) */
302 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
303 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
304 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
305 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
306 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
307 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
308 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
309 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
310 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
311 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
316 /* ----------------------------------------------------------------------- */
317 /* array with description for bt848 / bt878 tv/grabber cards */
319 struct tvcard bttv_tvcards[] = {
320 /* ---- card 0x00 ---------------------------------- */
321 [BTTV_BOARD_UNKNOWN] = {
322 .name = " *** UNKNOWN/GENERIC *** ",
327 .muxsel = { 2, 3, 1, 0 },
329 .tuner_addr = ADDR_UNSET,
330 .radio_addr = ADDR_UNSET,
332 [BTTV_BOARD_MIRO] = {
339 .muxsel = { 2, 3, 1, 1 },
340 .gpiomux = { 2, 0, 0, 0 },
344 .tuner_addr = ADDR_UNSET,
345 .radio_addr = ADDR_UNSET,
347 [BTTV_BOARD_HAUPPAUGE] = {
348 .name = "Hauppauge (bt848)",
354 .muxsel = { 2, 3, 1, 1 },
355 .gpiomux = { 0, 1, 2, 3 },
359 .tuner_addr = ADDR_UNSET,
360 .radio_addr = ADDR_UNSET,
363 .name = "STB, Gateway P/N 6000699 (bt848)",
369 .muxsel = { 2, 3, 1, 1 },
370 .gpiomux = { 4, 0, 2, 3 },
374 .tuner_type = TUNER_PHILIPS_NTSC,
375 .tuner_addr = ADDR_UNSET,
376 .radio_addr = ADDR_UNSET,
381 /* ---- card 0x04 ---------------------------------- */
382 [BTTV_BOARD_INTEL] = {
383 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
389 .muxsel = { 2, 3, 1, 1 },
393 .tuner_addr = ADDR_UNSET,
394 .radio_addr = ADDR_UNSET,
396 [BTTV_BOARD_DIAMOND] = {
397 .name = "Diamond DTV2000",
403 .muxsel = { 2, 3, 1, 0 },
404 .gpiomux = { 0, 1, 0, 1 },
408 .tuner_addr = ADDR_UNSET,
409 .radio_addr = ADDR_UNSET,
411 [BTTV_BOARD_AVERMEDIA] = {
412 .name = "AVerMedia TVPhone",
417 .muxsel = { 2, 3, 1, 1 },
419 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
420 /* 0x04 for some cards ?? */
423 .tuner_addr = ADDR_UNSET,
424 .radio_addr = ADDR_UNSET,
425 .audio_hook = avermedia_tvphone_audio,
428 [BTTV_BOARD_MATRIX_VISION] = {
429 .name = "MATRIX-Vision MV-Delta",
435 .muxsel = { 2, 3, 1, 0, 0 },
439 .tuner_addr = ADDR_UNSET,
440 .radio_addr = ADDR_UNSET,
443 /* ---- card 0x08 ---------------------------------- */
444 [BTTV_BOARD_FLYVIDEO] = {
445 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
451 .muxsel = { 2, 3, 1, 1 },
452 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
457 .tuner_addr = ADDR_UNSET,
458 .radio_addr = ADDR_UNSET,
460 [BTTV_BOARD_TURBOTV] = {
461 .name = "IMS/IXmicro TurboTV",
467 .muxsel = { 2, 3, 1, 1 },
468 .gpiomux = { 1, 1, 2, 3 },
471 .tuner_type = TUNER_TEMIC_PAL,
472 .tuner_addr = ADDR_UNSET,
473 .radio_addr = ADDR_UNSET,
475 [BTTV_BOARD_HAUPPAUGE878] = {
476 .name = "Hauppauge (bt878)",
481 .gpiomask = 0x0f, /* old: 7 */
482 .muxsel = { 2, 0, 1, 1 },
483 .gpiomux = { 0, 1, 2, 3 },
488 .tuner_addr = ADDR_UNSET,
489 .radio_addr = ADDR_UNSET,
491 [BTTV_BOARD_MIROPRO] = {
492 .name = "MIRO PCTV pro",
498 .muxsel = { 2, 3, 1, 1 },
499 .gpiomux = { 0x20001,0x10001, 0, 0 },
503 .tuner_addr = ADDR_UNSET,
504 .radio_addr = ADDR_UNSET,
507 /* ---- card 0x0c ---------------------------------- */
508 [BTTV_BOARD_ADSTECH_TV] = {
509 .name = "ADS Technologies Channel Surfer TV (bt848)",
515 .muxsel = { 2, 3, 1, 1 },
516 .gpiomux = { 13, 14, 11, 7 },
519 .tuner_addr = ADDR_UNSET,
520 .radio_addr = ADDR_UNSET,
522 [BTTV_BOARD_AVERMEDIA98] = {
523 .name = "AVerMedia TVCapture 98",
529 .muxsel = { 2, 3, 1, 1 },
530 .gpiomux = { 13, 14, 11, 7 },
534 .tuner_type = TUNER_PHILIPS_PAL,
535 .tuner_addr = ADDR_UNSET,
536 .radio_addr = ADDR_UNSET,
537 .audio_hook = avermedia_tv_stereo_audio,
541 .name = "Aimslab Video Highway Xtreme (VHX)",
547 .muxsel = { 2, 3, 1, 1 },
548 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
553 .tuner_addr = ADDR_UNSET,
554 .radio_addr = ADDR_UNSET,
556 [BTTV_BOARD_ZOLTRIX] = {
557 .name = "Zoltrix TV-Max",
563 .muxsel = { 2, 3, 1, 1 },
564 .gpiomux = { 0, 0, 1, 0 },
568 .tuner_addr = ADDR_UNSET,
569 .radio_addr = ADDR_UNSET,
572 /* ---- card 0x10 ---------------------------------- */
573 [BTTV_BOARD_PIXVIEWPLAYTV] = {
574 .name = "Prolink Pixelview PlayTV (bt878)",
579 .gpiomask = 0x01fe00,
580 .muxsel = { 2, 3, 1, 1 },
583 .gpiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000 },
585 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
586 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
587 .gpiomute = 0x002000,
593 [BTTV_BOARD_WINVIEW_601] = {
594 .name = "Leadtek WinView 601",
599 .gpiomask = 0x8300f8,
600 .muxsel = { 2, 3, 1, 1,0 },
601 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
602 .gpiomute = 0xcfa007,
605 .tuner_addr = ADDR_UNSET,
606 .radio_addr = ADDR_UNSET,
607 .audio_hook = winview_audio,
610 [BTTV_BOARD_AVEC_INTERCAP] = {
611 .name = "AVEC Intercapture",
617 .muxsel = { 2, 3, 1, 1 },
618 .gpiomux = { 1, 0, 0, 0 },
621 .tuner_addr = ADDR_UNSET,
622 .radio_addr = ADDR_UNSET,
624 [BTTV_BOARD_LIFE_FLYKIT] = {
625 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
630 .gpiomask = 0x8dff00,
631 .muxsel = { 2, 3, 1, 1 },
635 .tuner_addr = ADDR_UNSET,
636 .radio_addr = ADDR_UNSET,
639 /* ---- card 0x14 ---------------------------------- */
640 [BTTV_BOARD_CEI_RAFFLES] = {
641 .name = "CEI Raffles Card",
646 .muxsel = { 2, 3, 1, 1 },
648 .tuner_addr = ADDR_UNSET,
649 .radio_addr = ADDR_UNSET,
651 [BTTV_BOARD_CONFERENCETV] = {
652 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
654 .audio_inputs = 2, /* tuner, line in */
658 .muxsel = { 2, 3, 1, 1 },
659 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
662 .tuner_type = TUNER_PHILIPS_PAL_I,
663 .tuner_addr = ADDR_UNSET,
664 .radio_addr = ADDR_UNSET,
666 [BTTV_BOARD_PHOEBE_TVMAS] = {
667 .name = "Askey CPH050/ Phoebe Tv Master + FM",
673 .muxsel = { 2, 3, 1, 1 },
674 .gpiomux = { 0, 1, 0x800, 0x400 },
679 .tuner_addr = ADDR_UNSET,
680 .radio_addr = ADDR_UNSET,
682 [BTTV_BOARD_MODTEC_205] = {
683 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
689 .muxsel = { 2, 3, -1 },
690 .digital_mode = DIGITAL_MODE_CAMERA,
691 .gpiomux = { 0, 0, 0, 0 },
694 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
695 .tuner_addr = ADDR_UNSET,
696 .radio_addr = ADDR_UNSET,
699 /* ---- card 0x18 ---------------------------------- */
700 [BTTV_BOARD_MAGICTVIEW061] = {
701 .name = "Askey CPH05X/06X (bt878) [many vendors]",
707 .muxsel = { 2, 3, 1, 1 },
708 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
713 .tuner_addr = ADDR_UNSET,
714 .radio_addr = ADDR_UNSET,
717 [BTTV_BOARD_VOBIS_BOOSTAR] = {
718 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
723 .gpiomask = 0x1f0fff,
724 .muxsel = { 2, 3, 1, 1 },
725 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
728 .tuner_type = TUNER_PHILIPS_PAL,
729 .tuner_addr = ADDR_UNSET,
730 .radio_addr = ADDR_UNSET,
731 .audio_hook = terratv_audio,
733 [BTTV_BOARD_HAUPPAUG_WCAM] = {
734 .name = "Hauppauge WinCam newer (bt878)",
740 .muxsel = { 2, 0, 1, 1 },
741 .gpiomux = { 0, 1, 2, 3 },
745 .tuner_addr = ADDR_UNSET,
746 .radio_addr = ADDR_UNSET,
748 [BTTV_BOARD_MAXI] = {
749 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
755 .muxsel = { 2, 3, 1, 1 },
756 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
759 .tuner_type = TUNER_PHILIPS_SECAM,
760 .tuner_addr = ADDR_UNSET,
761 .radio_addr = ADDR_UNSET,
764 /* ---- card 0x1c ---------------------------------- */
765 [BTTV_BOARD_TERRATV] = {
766 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
771 .gpiomask = 0x1f0fff,
772 .muxsel = { 2, 3, 1, 1 },
773 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
776 .tuner_type = TUNER_PHILIPS_PAL,
777 .tuner_addr = ADDR_UNSET,
778 .radio_addr = ADDR_UNSET,
779 .audio_hook = terratv_audio,
781 External 20 pin connector (for Active Radio Upgrade board)
787 gpio05: om5610-stereo
791 gpio09+10: nIOR, nSEL ?? (bt878)
795 gpio16: u2-A0 (1st 4052bt)
798 gpio19: u4-A0 (2nd 4052)
802 00000 : Cdrom (internal audio input)
803 10000 : ext. Video audio input
812 [BTTV_BOARD_PXC200] = {
813 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
814 .name = "Imagenation PXC200",
818 .svhs = 1, /* was: 4 */
820 .muxsel = { 2, 3, 1, 0, 0},
824 .tuner_addr = ADDR_UNSET,
825 .radio_addr = ADDR_UNSET,
826 .muxsel_hook = PXC200_muxsel,
829 [BTTV_BOARD_FLYVIDEO_98] = {
830 .name = "Lifeview FlyVideo 98 LR50",
835 .gpiomask = 0x1800, /* 0x8dfe00 */
836 .muxsel = { 2, 3, 1, 1 },
837 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
841 .tuner_addr = ADDR_UNSET,
842 .radio_addr = ADDR_UNSET,
844 [BTTV_BOARD_IPROTV] = {
845 .name = "Formac iProTV, Formac ProTV I (bt848)",
851 .muxsel = { 2, 3, 1, 1 },
852 .gpiomux = { 1, 0, 0, 0 },
854 .tuner_type = TUNER_PHILIPS_PAL,
855 .tuner_addr = ADDR_UNSET,
856 .radio_addr = ADDR_UNSET,
859 /* ---- card 0x20 ---------------------------------- */
860 [BTTV_BOARD_INTEL_C_S_PCI] = {
861 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
867 .muxsel = { 2, 3, 1, 1 },
871 .tuner_addr = ADDR_UNSET,
872 .radio_addr = ADDR_UNSET,
874 [BTTV_BOARD_TERRATVALUE] = {
875 .name = "Terratec TerraTValue Version Bt878",
880 .gpiomask = 0xffff00,
881 .muxsel = { 2, 3, 1, 1 },
882 .gpiomux = { 0x500, 0, 0x300, 0x900 },
886 .tuner_type = TUNER_PHILIPS_PAL,
887 .tuner_addr = ADDR_UNSET,
888 .radio_addr = ADDR_UNSET,
890 [BTTV_BOARD_WINFAST2000] = {
891 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
896 .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
898 .gpiomask = 0xc33000,
899 .gpiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
901 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
902 .gpiomask = 0xb33000,
903 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
904 .gpiomute = 0x800000,
906 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
907 gpio23 -- hef4052:nEnable (0x800000)
910 0x0000: external audio
914 Note: There exists another variant "Winfast 2000" with tv stereo !?
915 Note: eeprom only contains FF and pci subsystem id 107d:6606
920 .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
921 .tuner_addr = ADDR_UNSET,
922 .radio_addr = ADDR_UNSET,
923 .audio_hook = winfast2000_audio,
926 [BTTV_BOARD_CHRONOS_VS2] = {
927 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
933 .muxsel = { 2, 3, 1, 1 },
934 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
938 .tuner_addr = ADDR_UNSET,
939 .radio_addr = ADDR_UNSET,
942 /* ---- card 0x24 ---------------------------------- */
943 [BTTV_BOARD_TYPHOON_TVIEW] = {
944 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
950 .muxsel = { 2, 3, 1, 1 },
951 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
955 .tuner_addr = ADDR_UNSET,
956 .radio_addr = ADDR_UNSET,
959 [BTTV_BOARD_PXELVWPLTVPRO] = {
960 .name = "Prolink PixelView PlayTV pro",
966 .muxsel = { 2, 3, 1, 1 },
967 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
972 .tuner_addr = ADDR_UNSET,
973 .radio_addr = ADDR_UNSET,
975 [BTTV_BOARD_MAGICTVIEW063] = {
976 .name = "Askey CPH06X TView99",
981 .gpiomask = 0x551e00,
982 .muxsel = { 2, 3, 1, 0 },
983 .gpiomux = { 0x551400, 0x551200, 0, 0 },
984 .gpiomute = 0x551c00,
988 .tuner_addr = ADDR_UNSET,
989 .radio_addr = ADDR_UNSET,
992 [BTTV_BOARD_PINNACLE] = {
993 .name = "Pinnacle PCTV Studio/Rave",
998 .gpiomask = 0x03000F,
999 .muxsel = { 2, 3, 1, 1 },
1000 .gpiomux = { 2, 0xd0001, 0, 0 },
1005 .tuner_addr = ADDR_UNSET,
1006 .radio_addr = ADDR_UNSET,
1009 /* ---- card 0x28 ---------------------------------- */
1010 [BTTV_BOARD_STB2] = {
1011 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
1017 .muxsel = { 2, 3, 1, 1 },
1018 .gpiomux = { 4, 0, 2, 3 },
1022 .tuner_type = TUNER_PHILIPS_NTSC,
1023 .tuner_addr = ADDR_UNSET,
1024 .radio_addr = ADDR_UNSET,
1028 [BTTV_BOARD_AVPHONE98] = {
1029 .name = "AVerMedia TVPhone 98",
1035 .muxsel = { 2, 3, 1, 1 },
1036 .gpiomux = { 13, 4, 11, 7 },
1040 .tuner_addr = ADDR_UNSET,
1041 .radio_addr = ADDR_UNSET,
1043 .audio_hook = avermedia_tvphone_audio,
1045 [BTTV_BOARD_PV951] = {
1046 .name = "ProVideo PV951", /* pic16c54 */
1052 .muxsel = { 2, 3, 1, 1},
1053 .gpiomux = { 0, 0, 0, 0},
1058 .tuner_addr = ADDR_UNSET,
1059 .radio_addr = ADDR_UNSET,
1061 [BTTV_BOARD_ONAIR_TV] = {
1062 .name = "Little OnAir TV",
1068 .muxsel = { 2, 3, 1, 1 },
1069 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1070 .gpiomute = 0xff3ffc,
1073 .tuner_addr = ADDR_UNSET,
1074 .radio_addr = ADDR_UNSET,
1077 /* ---- card 0x2c ---------------------------------- */
1078 [BTTV_BOARD_SIGMA_TVII_FM] = {
1079 .name = "Sigma TVII-FM",
1085 .muxsel = { 2, 3, 1, 1 },
1086 .gpiomux = { 1, 1, 0, 2 },
1091 .tuner_addr = ADDR_UNSET,
1092 .radio_addr = ADDR_UNSET,
1094 [BTTV_BOARD_MATRIX_VISION2] = {
1095 .name = "MATRIX-Vision MV-Delta 2",
1101 .muxsel = { 2, 3, 1, 0, 0 },
1106 .tuner_addr = ADDR_UNSET,
1107 .radio_addr = ADDR_UNSET,
1109 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1110 .name = "Zoltrix Genie TV/FM",
1115 .gpiomask = 0xbcf03f,
1116 .muxsel = { 2, 3, 1, 1 },
1117 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1118 .gpiomute = 0xbcb03f,
1122 .tuner_addr = ADDR_UNSET,
1123 .radio_addr = ADDR_UNSET,
1125 [BTTV_BOARD_TERRATVRADIO] = {
1126 .name = "Terratec TV/Radio+",
1131 .gpiomask = 0x70000,
1132 .muxsel = { 2, 3, 1, 1 },
1133 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1134 .gpiomute = 0x40000,
1139 .tuner_addr = ADDR_UNSET,
1140 .radio_addr = ADDR_UNSET,
1144 /* ---- card 0x30 ---------------------------------- */
1145 [BTTV_BOARD_DYNALINK] = {
1146 .name = "Askey CPH03x/ Dynalink Magic TView",
1152 .muxsel = { 2, 3, 1, 1 },
1153 .gpiomux = {2,0,0,0 },
1158 .tuner_addr = ADDR_UNSET,
1159 .radio_addr = ADDR_UNSET,
1161 [BTTV_BOARD_GVBCTV3PCI] = {
1162 .name = "IODATA GV-BCTV3/PCI",
1167 .gpiomask = 0x010f00,
1168 .muxsel = {2, 3, 0, 0 },
1169 .gpiomux = {0x10000, 0, 0x10000, 0 },
1172 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1173 .tuner_addr = ADDR_UNSET,
1174 .radio_addr = ADDR_UNSET,
1175 .audio_hook = gvbctv3pci_audio,
1177 [BTTV_BOARD_PXELVWPLTVPAK] = {
1178 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1183 .gpiomask = 0xAA0000,
1184 .muxsel = { 2,3,1,1,-1 },
1185 .digital_mode = DIGITAL_MODE_CAMERA,
1186 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1187 .gpiomute = 0xa8000,
1190 .tuner_type = TUNER_PHILIPS_PAL_I,
1191 .tuner_addr = ADDR_UNSET,
1192 .radio_addr = ADDR_UNSET,
1194 /* GPIO wiring: (different from Rev.4C !)
1195 GPIO17: U4.A0 (first hef4052bt)
1197 GPIO20: U5.A1 (second hef4052bt)
1199 GPIO22: BT832 Reset Line
1200 GPIO23: A5,A0, U5,nEN
1201 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1204 [BTTV_BOARD_EAGLE] = {
1205 .name = "Eagle Wireless Capricorn2 (bt878A)",
1211 .muxsel = { 2, 0, 1, 1 },
1212 .gpiomux = { 0, 1, 2, 3 },
1215 .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
1216 .tuner_addr = ADDR_UNSET,
1217 .radio_addr = ADDR_UNSET,
1220 /* ---- card 0x34 ---------------------------------- */
1221 [BTTV_BOARD_PINNACLEPRO] = {
1222 /* David Härdeman <david@2gen.com> */
1223 .name = "Pinnacle PCTV Studio Pro",
1228 .gpiomask = 0x03000F,
1229 .muxsel = { 2, 3, 1, 1 },
1230 .gpiomux = { 1, 0xd0001, 0, 0 },
1232 /* sound path (5 sources):
1233 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1236 2= Mono TV sound from Tuner
1238 MUX2 (mask 0x30000):
1240 1= FM stereo Radio from Tuner */
1244 .tuner_addr = ADDR_UNSET,
1245 .radio_addr = ADDR_UNSET,
1247 [BTTV_BOARD_TVIEW_RDS_FM] = {
1248 /* Claas Langbehn <claas@bigfoot.com>,
1249 Sven Grothklags <sven@upb.de> */
1250 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1256 .muxsel = { 2, 3, 1, 1 },
1257 .gpiomux = { 0, 0, 0x10, 8 },
1261 .tuner_type = TUNER_PHILIPS_PAL,
1262 .tuner_addr = ADDR_UNSET,
1263 .radio_addr = ADDR_UNSET,
1266 [BTTV_BOARD_LIFETEC_9415] = {
1267 /* Tim Röstermundt <rosterm@uni-muenster.de>
1268 in de.comp.os.unix.linux.hardware:
1269 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1270 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1271 options tuner type=5 */
1272 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1278 .muxsel = { 2, 3, 1, 1 },
1279 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1281 /* For cards with tda9820/tda9821:
1282 0x0000: Tuner normal stereo
1283 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1284 0x0880: Tuner A2 stereo */
1287 .tuner_addr = ADDR_UNSET,
1288 .radio_addr = ADDR_UNSET,
1290 [BTTV_BOARD_BESTBUY_EASYTV] = {
1291 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1292 old Easy TV BT848 version (model CPH031) */
1293 .name = "Askey CPH031/ BESTBUY Easy TV",
1299 .muxsel = { 2, 3, 1, 0 },
1300 .gpiomux = { 2, 0, 0, 0 },
1304 .tuner_type = TUNER_TEMIC_PAL,
1305 .tuner_addr = ADDR_UNSET,
1306 .radio_addr = ADDR_UNSET,
1309 /* ---- card 0x38 ---------------------------------- */
1310 [BTTV_BOARD_FLYVIDEO_98FM] = {
1311 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1312 .name = "Lifeview FlyVideo 98FM LR50",
1318 .muxsel = { 2, 3, 1, 1 },
1319 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1323 .tuner_addr = ADDR_UNSET,
1324 .radio_addr = ADDR_UNSET,
1326 /* This is the ultimate cheapo capture card
1327 * just a BT848A on a small PCB!
1328 * Steve Hosgood <steve@equiinet.com> */
1329 [BTTV_BOARD_GRANDTEC] = {
1330 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1342 .tuner_addr = ADDR_UNSET,
1343 .radio_addr = ADDR_UNSET,
1345 [BTTV_BOARD_ASKEY_CPH060] = {
1346 /* Daniel Herrington <daniel.herrington@home.com> */
1347 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1353 .muxsel = { 2, 3, 1, 1},
1354 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1358 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1359 .tuner_addr = ADDR_UNSET,
1360 .radio_addr = ADDR_UNSET,
1362 [BTTV_BOARD_ASKEY_CPH03X] = {
1363 /* Matti Mottus <mottus@physic.ut.ee> */
1364 .name = "Askey CPH03x TV Capturer",
1369 .gpiomask = 0x03000F,
1370 .muxsel = { 2, 3, 1, 0 },
1371 .gpiomux = { 2, 0, 0, 0 },
1375 .tuner_addr = ADDR_UNSET,
1376 .radio_addr = ADDR_UNSET,
1379 /* ---- card 0x3c ---------------------------------- */
1380 [BTTV_BOARD_MM100PCTV] = {
1381 /* Philip Blundell <philb@gnu.org> */
1382 .name = "Modular Technology MM100PCTV",
1388 .muxsel = { 2, 3, 1, 1 },
1389 .gpiomux = { 2, 0, 0, 1 },
1392 .tuner_type = TUNER_TEMIC_PAL,
1393 .tuner_addr = ADDR_UNSET,
1394 .radio_addr = ADDR_UNSET,
1396 [BTTV_BOARD_GMV1] = {
1397 /* Adrian Cox <adrian@humboldt.co.uk */
1398 .name = "AG Electronics GMV1",
1410 .tuner_addr = ADDR_UNSET,
1411 .radio_addr = ADDR_UNSET,
1413 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1414 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1415 new Easy TV BT878 version (model CPH061)
1416 special thanks to Informatica Mieres for providing the card */
1417 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1423 .muxsel = { 2, 3, 1, 0 },
1424 .gpiomux = { 1, 0, 4, 4 },
1428 .tuner_type = TUNER_PHILIPS_PAL,
1429 .tuner_addr = ADDR_UNSET,
1430 .radio_addr = ADDR_UNSET,
1432 [BTTV_BOARD_ATI_TVWONDER] = {
1433 /* Lukas Gebauer <geby@volny.cz> */
1434 .name = "ATI TV-Wonder",
1440 .muxsel = { 2, 3, 1, 0 },
1441 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1444 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1445 .tuner_addr = ADDR_UNSET,
1446 .radio_addr = ADDR_UNSET,
1449 /* ---- card 0x40 ---------------------------------- */
1450 [BTTV_BOARD_ATI_TVWONDERVE] = {
1451 /* Lukas Gebauer <geby@volny.cz> */
1452 .name = "ATI TV-Wonder VE",
1458 .muxsel = { 2, 3, 0, 1 },
1459 .gpiomux = { 0, 0, 1, 0 },
1462 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1463 .tuner_addr = ADDR_UNSET,
1464 .radio_addr = ADDR_UNSET,
1466 [BTTV_BOARD_FLYVIDEO2000] = {
1467 /* DeeJay <deejay@westel900.net (2000S) */
1468 .name = "Lifeview FlyVideo 2000S LR90",
1474 .muxsel = { 2, 3, 0, 1 },
1475 /* Radio changed from 1e80 to 0x800 to make
1476 FlyVideo2000S in .hu happy (gm)*/
1477 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1478 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1480 .audio_hook = fv2000s_audio,
1486 .tuner_addr = ADDR_UNSET,
1487 .radio_addr = ADDR_UNSET,
1489 [BTTV_BOARD_TERRATVALUER] = {
1490 .name = "Terratec TValueRadio",
1495 .gpiomask = 0xffff00,
1496 .muxsel = { 2, 3, 1, 1 },
1497 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1501 .tuner_type = TUNER_PHILIPS_PAL,
1502 .tuner_addr = ADDR_UNSET,
1503 .radio_addr = ADDR_UNSET,
1506 [BTTV_BOARD_GVBCTV4PCI] = {
1507 /* TANAKA Kei <peg00625@nifty.com> */
1508 .name = "IODATA GV-BCTV4/PCI",
1513 .gpiomask = 0x010f00,
1514 .muxsel = {2, 3, 0, 0 },
1515 .gpiomux = {0x10000, 0, 0x10000, 0 },
1518 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1519 .tuner_addr = ADDR_UNSET,
1520 .radio_addr = ADDR_UNSET,
1521 .audio_hook = gvbctv3pci_audio,
1524 /* ---- card 0x44 ---------------------------------- */
1525 [BTTV_BOARD_VOODOOTV_FM] = {
1526 .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
1527 /* try "insmod msp3400 simple=0" if you have
1528 * sound problems with this card. */
1533 .gpiomask = 0x4f8a00,
1534 /* 0x100000: 1=MSP enabled (0=disable again)
1535 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1536 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1537 .gpiomute = 0x947fff,
1538 /* tvtuner, radio, external,internal, mute, stereo
1539 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1540 .muxsel = { 2, 3 ,0 ,1 },
1541 .tuner_type = TUNER_MT2032,
1542 .tuner_addr = ADDR_UNSET,
1543 .radio_addr = ADDR_UNSET,
1547 [BTTV_BOARD_AIMMS] = {
1548 /* Philip Blundell <pb@nexus.co.uk> */
1549 .name = "Active Imaging AIMMS",
1554 .tuner_addr = ADDR_UNSET,
1555 .radio_addr = ADDR_UNSET,
1560 [BTTV_BOARD_PV_BT878P_PLUS] = {
1561 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1562 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1568 .muxsel = { 2, 3, 1, 1 },
1569 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1574 .tuner_addr = ADDR_UNSET,
1575 .radio_addr = ADDR_UNSET,
1578 GPIO0: U4.A0 (hef4052bt)
1580 GPIO2: U4.A1 (second hef4052bt)
1581 GPIO3: U4.nEN, U5.A0, A5.nEN
1585 [BTTV_BOARD_FLYVIDEO98EZ] = {
1586 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1591 .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1594 .tuner_type = UNSET,
1595 .tuner_addr = ADDR_UNSET,
1596 .radio_addr = ADDR_UNSET,
1599 /* ---- card 0x48 ---------------------------------- */
1600 [BTTV_BOARD_PV_BT878P_9B] = {
1601 /* Dariusz Kowalewski <darekk@automex.pl> */
1602 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1608 .muxsel = { 2, 3, 1, 1 },
1609 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1616 .tuner_addr = ADDR_UNSET,
1617 .radio_addr = ADDR_UNSET,
1618 .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
1619 .has_radio = 1, /* Note: not all cards have radio */
1626 GPIO20,22,23: R30,R29,R28
1629 [BTTV_BOARD_SENSORAY311] = {
1630 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1631 /* you must jumper JP5 for the card to work */
1632 .name = "Sensoray 311",
1638 .muxsel = { 2, 3, 1, 0, 0 },
1642 .tuner_addr = ADDR_UNSET,
1643 .radio_addr = ADDR_UNSET,
1645 [BTTV_BOARD_RV605] = {
1646 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1647 .name = "RemoteVision MX (RV605)",
1653 .gpiomask2 = 0x07ff,
1654 .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1655 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1659 .tuner_addr = ADDR_UNSET,
1660 .radio_addr = ADDR_UNSET,
1661 .muxsel_hook = rv605_muxsel,
1663 [BTTV_BOARD_POWERCLR_MTV878] = {
1664 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1669 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1670 .muxsel = { 2, 1, 1, },
1671 .gpiomux = { 0, 1, 2, 2 },
1674 .tuner_type = TUNER_PHILIPS_PAL,
1675 .tuner_addr = ADDR_UNSET,
1676 .radio_addr = ADDR_UNSET,
1681 /* ---- card 0x4c ---------------------------------- */
1682 [BTTV_BOARD_WINDVR] = {
1683 /* Masaki Suzuki <masaki@btree.org> */
1684 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1689 .gpiomask = 0x140007,
1690 .muxsel = { 2, 3, 1, 1 },
1691 .gpiomux = { 0, 1, 2, 3 },
1693 .tuner_type = TUNER_PHILIPS_NTSC,
1694 .tuner_addr = ADDR_UNSET,
1695 .radio_addr = ADDR_UNSET,
1696 .audio_hook = windvr_audio,
1698 [BTTV_BOARD_GRANDTEC_MULTI] = {
1699 .name = "GrandTec Multi Capture Card (Bt878)",
1705 .muxsel = { 2, 3, 1, 0 },
1711 .tuner_addr = ADDR_UNSET,
1712 .radio_addr = ADDR_UNSET,
1714 [BTTV_BOARD_KWORLD] = {
1715 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1721 .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
1722 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1723 * This card lacks external Audio In, so we mute it on Ext. & Int.
1724 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1725 * This card lacks PCI subsystem ID, sigh.
1726 * gpiomux =1: lower volume, 2+3: mute
1727 * btwincap uses 0x80000/0x80003
1734 .tuner_addr = ADDR_UNSET,
1735 .radio_addr = ADDR_UNSET,
1736 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1737 radio signal strength indicators work fine. */
1740 GPIO0,1: HEF4052 A0,A1
1741 GPIO2: HEF4052 nENABLE
1743 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1747 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1749 [BTTV_BOARD_DSP_TCVIDEO] = {
1750 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1751 .name = "DSP Design TCVIDEO",
1754 .muxsel = { 2, 3, 1, 0 },
1757 .tuner_addr = ADDR_UNSET,
1758 .radio_addr = ADDR_UNSET,
1761 /* ---- card 0x50 ---------------------------------- */
1762 [BTTV_BOARD_HAUPPAUGEPVR] = {
1763 .name = "Hauppauge WinTV PVR",
1768 .muxsel = { 2, 0, 1, 1 },
1772 .tuner_addr = ADDR_UNSET,
1773 .radio_addr = ADDR_UNSET,
1778 [BTTV_BOARD_GVBCTV5PCI] = {
1779 .name = "IODATA GV-BCTV5/PCI",
1784 .gpiomask = 0x0f0f80,
1785 .muxsel = {2, 3, 1, 0 },
1786 .gpiomux = {0x030000, 0x010000, 0, 0 },
1787 .gpiomute = 0x020000,
1790 .tuner_type = TUNER_PHILIPS_NTSC_M,
1791 .tuner_addr = ADDR_UNSET,
1792 .radio_addr = ADDR_UNSET,
1793 .audio_hook = gvbctv5pci_audio,
1796 [BTTV_BOARD_OSPREY1x0] = {
1797 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1798 .video_inputs = 4, /* id-inputs-clock */
1802 .muxsel = { 3, 2, 0, 1 },
1805 .tuner_addr = ADDR_UNSET,
1806 .radio_addr = ADDR_UNSET,
1811 [BTTV_BOARD_OSPREY1x0_848] = {
1812 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1817 .muxsel = { 2, 3, 1 },
1820 .tuner_addr = ADDR_UNSET,
1821 .radio_addr = ADDR_UNSET,
1827 /* ---- card 0x54 ---------------------------------- */
1828 [BTTV_BOARD_OSPREY101_848] = {
1829 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1837 .tuner_addr = ADDR_UNSET,
1838 .radio_addr = ADDR_UNSET,
1843 [BTTV_BOARD_OSPREY1x1] = {
1844 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1852 .tuner_addr = ADDR_UNSET,
1853 .radio_addr = ADDR_UNSET,
1858 [BTTV_BOARD_OSPREY1x1_SVID] = {
1859 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1867 .tuner_addr = ADDR_UNSET,
1868 .radio_addr = ADDR_UNSET,
1873 [BTTV_BOARD_OSPREY2xx] = {
1874 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1881 .tuner_type = UNSET,
1882 .tuner_addr = ADDR_UNSET,
1883 .radio_addr = ADDR_UNSET,
1889 /* ---- card 0x58 ---------------------------------- */
1890 [BTTV_BOARD_OSPREY2x0_SVID] = {
1891 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1898 .tuner_type = UNSET,
1899 .tuner_addr = ADDR_UNSET,
1900 .radio_addr = ADDR_UNSET,
1905 [BTTV_BOARD_OSPREY2x0] = {
1906 .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
1913 .tuner_type = UNSET,
1914 .tuner_addr = ADDR_UNSET,
1915 .radio_addr = ADDR_UNSET,
1920 [BTTV_BOARD_OSPREY500] = {
1921 .name = "Osprey 500", /* 500 */
1929 .tuner_addr = ADDR_UNSET,
1930 .radio_addr = ADDR_UNSET,
1935 [BTTV_BOARD_OSPREY540] = {
1936 .name = "Osprey 540", /* 540 */
1940 #if 0 /* TODO ... */
1941 .svhs = OSPREY540_SVID_ANALOG,
1942 .muxsel = { [OSPREY540_COMP_ANALOG] = 2,
1943 [OSPREY540_SVID_ANALOG] = 3, },
1947 .tuner_addr = ADDR_UNSET,
1948 .radio_addr = ADDR_UNSET,
1952 #if 0 /* TODO ... */
1953 .muxsel_hook = osprey_540_muxsel,
1954 .picture_hook = osprey_540_set_picture,
1958 /* ---- card 0x5C ---------------------------------- */
1959 [BTTV_BOARD_OSPREY2000] = {
1960 .name = "Osprey 2000", /* 2000 */
1967 .tuner_type = UNSET,
1968 .tuner_addr = ADDR_UNSET,
1969 .radio_addr = ADDR_UNSET,
1972 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1974 [BTTV_BOARD_IDS_EAGLE] = {
1975 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1976 .name = "IDS Eagle",
1981 .tuner_addr = ADDR_UNSET,
1982 .radio_addr = ADDR_UNSET,
1985 .muxsel = { 0, 1, 2, 3 },
1986 .muxsel_hook = eagle_muxsel,
1991 [BTTV_BOARD_PINNACLESAT] = {
1992 .name = "Pinnacle PCTV Sat",
1998 .tuner_addr = ADDR_UNSET,
1999 .radio_addr = ADDR_UNSET,
2003 .muxsel = { 3, 0, 1, 2 },
2008 [BTTV_BOARD_FORMAC_PROTV] = {
2009 .name = "Formac ProTV II (bt878)",
2015 /* TV, Comp1, Composite over SVID con, SVID */
2016 .muxsel = { 2, 3, 1, 1 },
2017 .gpiomux = { 2, 2, 0, 0 },
2020 .tuner_type = TUNER_PHILIPS_PAL,
2021 .tuner_addr = ADDR_UNSET,
2022 .radio_addr = ADDR_UNSET,
2024 GPIO=0x00,0x01,0x03: mute (?)
2025 0x02: both TV and radio (tuner: FM1216/I)
2026 The card has onboard audio connectors labeled "cdrom" and "board",
2027 not soldered here, though unknown wiring.
2028 Card lacks: external audio in, pci subsystem id.
2032 /* ---- card 0x60 ---------------------------------- */
2033 [BTTV_BOARD_MACHTV] = {
2040 .muxsel = { 2, 3, 1, 1},
2041 .gpiomux = { 0, 1, 2, 3},
2045 .tuner_addr = ADDR_UNSET,
2046 .radio_addr = ADDR_UNSET,
2049 [BTTV_BOARD_EURESYS_PICOLO] = {
2050 .name = "Euresys Picolo",
2059 .muxsel = { 2, 0, 1},
2061 .tuner_type = UNSET,
2062 .tuner_addr = ADDR_UNSET,
2063 .radio_addr = ADDR_UNSET,
2065 [BTTV_BOARD_PV150] = {
2066 /* Luc Van Hoeylandt <luc@e-magic.be> */
2067 .name = "ProVideo PV150", /* 0x4f */
2078 .tuner_type = UNSET,
2079 .tuner_addr = ADDR_UNSET,
2080 .radio_addr = ADDR_UNSET,
2082 [BTTV_BOARD_AD_TVK503] = {
2083 /* Hiroshi Takekawa <sian@big.or.jp> */
2084 /* This card lacks subsystem ID */
2085 .name = "AD-TVK503", /* 0x63 */
2090 .gpiomask = 0x001e8007,
2091 .muxsel = { 2, 3, 1, 0 },
2092 /* Tuner, Radio, external, internal, off, on */
2093 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
2099 .tuner_addr = ADDR_UNSET,
2100 .radio_addr = ADDR_UNSET,
2101 .audio_hook = adtvk503_audio,
2104 /* ---- card 0x64 ---------------------------------- */
2105 [BTTV_BOARD_HERCULES_SM_TV] = {
2106 .name = "Hercules Smart TV Stereo",
2112 .muxsel = { 2, 3, 1, 1 },
2117 .tuner_addr = ADDR_UNSET,
2118 .radio_addr = ADDR_UNSET,
2120 - card lacks subsystem ID
2121 - stereo variant w/ daughter board with tda9874a @0xb0
2123 always from tda9874 independent of GPIO (?)
2124 external line in: unknown
2125 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2126 hef4053 (instead 4052) for unknown function
2129 [BTTV_BOARD_PACETV] = {
2130 .name = "Pace TV & Radio Card",
2135 .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2140 .tuner_addr = ADDR_UNSET,
2141 .radio_addr = ADDR_UNSET,
2144 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2145 only internal line out: (4pin header) RGGL
2146 Radio must be decoded by msp3410d (not routed through)*/
2148 .digital_mode = DIGITAL_MODE_CAMERA, todo!
2151 [BTTV_BOARD_IVC200] = {
2152 /* Chris Willing <chris@vislab.usyd.edu.au> */
2158 .tuner_addr = ADDR_UNSET,
2159 .radio_addr = ADDR_UNSET,
2165 [BTTV_BOARD_XGUARD] = {
2166 .name = "Grand X-Guard / Trust 814PCI",
2172 .tuner_addr = ADDR_UNSET,
2173 .radio_addr = ADDR_UNSET,
2175 .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2176 .muxsel_hook = xguard_muxsel,
2183 /* ---- card 0x68 ---------------------------------- */
2184 [BTTV_BOARD_NEBULA_DIGITV] = {
2185 .name = "Nebula Electronics DigiTV",
2189 .muxsel = { 2, 3, 1, 0 },
2195 .tuner_addr = ADDR_UNSET,
2196 .radio_addr = ADDR_UNSET,
2202 [BTTV_BOARD_PV143] = {
2203 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2204 .name = "ProVideo PV143",
2210 .muxsel = { 2, 3, 1, 0 },
2216 .tuner_addr = ADDR_UNSET,
2217 .radio_addr = ADDR_UNSET,
2219 [BTTV_BOARD_VD009X1_MINIDIN] = {
2220 /* M.Klahr@phytec.de */
2221 .name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2224 .tuner = -1, /* card has no tuner */
2227 .muxsel = { 2, 3, 1, 0 },
2228 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2232 .tuner_addr = ADDR_UNSET,
2233 .radio_addr = ADDR_UNSET,
2235 [BTTV_BOARD_VD009X1_COMBI] = {
2236 .name = "PHYTEC VD-009-X1 Combi (bt878)",
2239 .tuner = -1, /* card has no tuner */
2242 .muxsel = { 2, 3, 1, 1 },
2243 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2247 .tuner_addr = ADDR_UNSET,
2248 .radio_addr = ADDR_UNSET,
2251 /* ---- card 0x6c ---------------------------------- */
2252 [BTTV_BOARD_VD009_MINIDIN] = {
2253 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2256 .tuner = -1, /* card has no tuner */
2259 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2260 via the upper nibble of muxsel. here: used for
2261 xternal video-mux */
2262 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2263 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2267 .tuner_addr = ADDR_UNSET,
2268 .radio_addr = ADDR_UNSET,
2270 [BTTV_BOARD_VD009_COMBI] = {
2271 .name = "PHYTEC VD-009 Combi (bt878)",
2274 .tuner = -1, /* card has no tuner */
2277 .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
2278 via the upper nibble of muxsel. here: used for
2279 xternal video-mux */
2280 .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2281 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2285 .tuner_addr = ADDR_UNSET,
2286 .radio_addr = ADDR_UNSET,
2288 [BTTV_BOARD_IVC100] = {
2294 .tuner_addr = ADDR_UNSET,
2295 .radio_addr = ADDR_UNSET,
2298 .muxsel = { 2, 3, 1, 0 },
2301 [BTTV_BOARD_IVC120] = {
2302 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2305 .audio_inputs = 0, /* card has no audio */
2306 .tuner = -1, /* card has no tuner */
2308 .tuner_addr = ADDR_UNSET,
2309 .radio_addr = ADDR_UNSET,
2310 .svhs = -1, /* card has no svhs */
2316 .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2317 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2318 .muxsel_hook = ivc120_muxsel,
2322 /* ---- card 0x70 ---------------------------------- */
2323 [BTTV_BOARD_PC_HDTV] = {
2324 .name = "pcHDTV HD-2000 TV",
2329 .muxsel = { 2, 3, 1, 0 },
2330 .tuner_type = TUNER_PHILIPS_ATSC,
2331 .tuner_addr = ADDR_UNSET,
2332 .radio_addr = ADDR_UNSET,
2335 [BTTV_BOARD_TWINHAN_DST] = {
2336 .name = "Twinhan DST + clones",
2340 .tuner_type = TUNER_ABSENT,
2341 .tuner_addr = ADDR_UNSET,
2342 .radio_addr = ADDR_UNSET,
2346 [BTTV_BOARD_WINFASTVC100] = {
2347 .name = "Winfast VC100",
2352 .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2356 .tuner_type = TUNER_ABSENT,
2357 .tuner_addr = ADDR_UNSET,
2358 .radio_addr = ADDR_UNSET,
2361 [BTTV_BOARD_TEV560] = {
2362 .name = "Teppro TEV-560/InterVision IV-560",
2368 .muxsel = { 2, 3, 1, 1 },
2369 .gpiomux = { 1, 1, 1, 1 },
2371 .tuner_type = TUNER_PHILIPS_PAL,
2372 .tuner_addr = ADDR_UNSET,
2373 .radio_addr = ADDR_UNSET,
2377 /* ---- card 0x74 ---------------------------------- */
2378 [BTTV_BOARD_SIMUS_GVC1100] = {
2379 .name = "SIMUS GVC1100",
2385 .tuner_addr = ADDR_UNSET,
2386 .radio_addr = ADDR_UNSET,
2388 .muxsel = { 2, 2, 2, 2 },
2390 .muxsel_hook = gvc1100_muxsel,
2392 [BTTV_BOARD_NGSTV_PLUS] = {
2393 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2394 .name = "NGS NGSTV+",
2398 .gpiomask = 0x008007,
2399 .muxsel = { 2, 3, 0, 0 },
2400 .gpiomux = { 0, 0, 0, 0 },
2401 .gpiomute = 0x000003,
2403 .tuner_type = TUNER_PHILIPS_PAL,
2404 .tuner_addr = ADDR_UNSET,
2405 .radio_addr = ADDR_UNSET,
2408 [BTTV_BOARD_LMLBT4] = {
2409 /* http://linuxmedialabs.com */
2411 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2415 .muxsel = { 2, 3, 1, 0 },
2421 .tuner_addr = ADDR_UNSET,
2422 .radio_addr = ADDR_UNSET,
2424 [BTTV_BOARD_TEKRAM_M205] = {
2425 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2426 .name = "Tekram M205 PRO",
2430 .tuner_type = TUNER_PHILIPS_PAL,
2431 .tuner_addr = ADDR_UNSET,
2432 .radio_addr = ADDR_UNSET,
2436 .muxsel = { 2, 3, 1 },
2437 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2441 /* ---- card 0x78 ---------------------------------- */
2442 [BTTV_BOARD_CONTVFMI] = {
2443 /* Javier Cendan Ares <jcendan@lycos.es> */
2444 /* bt878 TV + FM without subsystem ID */
2445 .name = "Conceptronic CONTVFMi",
2450 .gpiomask = 0x008007,
2451 .muxsel = { 2, 3, 1, 1 },
2452 .gpiomux = { 0, 1, 2, 2 },
2456 .tuner_type = TUNER_PHILIPS_PAL,
2457 .tuner_addr = ADDR_UNSET,
2458 .radio_addr = ADDR_UNSET,
2462 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2463 /*Eric DEBIEF <debief@telemsa.com>*/
2464 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2465 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2467 .name = "Euresys Picolo Tetra",
2473 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2477 .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/
2478 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2481 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2483 .tuner_addr = ADDR_UNSET,
2484 .radio_addr = ADDR_UNSET,
2486 [BTTV_BOARD_SPIRIT_TV] = {
2487 /* Spirit TV Tuner from http://spiritmodems.com.au */
2488 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2489 .name = "Spirit TV Tuner",
2494 .gpiomask = 0x0000000f,
2495 .muxsel = { 2, 1, 1 },
2496 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2497 .tuner_type = TUNER_TEMIC_PAL,
2498 .tuner_addr = ADDR_UNSET,
2499 .radio_addr = ADDR_UNSET,
2503 [BTTV_BOARD_AVDVBT_771] = {
2504 /* Wolfram Joost <wojo@frokaschwei.de> */
2505 .name = "AVerMedia AVerTV DVB-T 771",
2509 .tuner_type = TUNER_ABSENT,
2510 .tuner_addr = ADDR_UNSET,
2511 .radio_addr = ADDR_UNSET,
2512 .muxsel = { 3 , 3 },
2521 /* ---- card 0x7c ---------------------------------- */
2522 [BTTV_BOARD_AVDVBT_761] = {
2523 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2524 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2525 .name = "AverMedia AverTV DVB-T 761",
2529 .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2535 .tuner_addr = ADDR_UNSET,
2536 .radio_addr = ADDR_UNSET,
2541 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2542 /* andre.schwarz@matrix-vision.de */
2543 .name = "MATRIX Vision Sigma-SQ",
2549 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
2550 3, 3, 3, 3, 3, 3, 3, 3 },
2551 .muxsel_hook = sigmaSQ_muxsel,
2556 .tuner_addr = ADDR_UNSET,
2557 .radio_addr = ADDR_UNSET,
2559 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2560 /* andre.schwarz@matrix-vision.de */
2561 .name = "MATRIX Vision Sigma-SLC",
2567 .muxsel = { 2, 2, 2, 2 },
2568 .muxsel_hook = sigmaSLC_muxsel,
2573 .tuner_addr = ADDR_UNSET,
2574 .radio_addr = ADDR_UNSET,
2576 /* BTTV_BOARD_APAC_VIEWCOMP */
2577 [BTTV_BOARD_APAC_VIEWCOMP] = {
2578 /* Attila Kondoros <attila.kondoros@chello.hu> */
2579 /* bt878 TV + FM 0x00000000 subsystem ID */
2580 .name = "APAC Viewcomp 878(AMAX)",
2586 .muxsel = { 2, 3, 1, 1 },
2587 .gpiomux = { 2, 0, 0, 0 },
2591 .tuner_type = TUNER_PHILIPS_PAL,
2592 .tuner_addr = ADDR_UNSET,
2593 .radio_addr = ADDR_UNSET,
2594 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2595 .has_radio = 1, /* not every card has radio */
2598 /* ---- card 0x80 ---------------------------------- */
2599 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2600 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2601 .name = "DViCO FusionHDTV DVB-T Lite",
2610 .tuner_addr = ADDR_UNSET,
2611 .radio_addr = ADDR_UNSET,
2613 [BTTV_BOARD_VGEAR_MYVCD] = {
2614 /* Steven <photon38@pchome.com.tw> */
2615 .name = "V-Gear MyVCD",
2621 .muxsel = {2, 3, 1, 0 },
2622 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2626 .tuner_type = TUNER_PHILIPS_NTSC_M,
2627 .tuner_addr = ADDR_UNSET,
2628 .radio_addr = ADDR_UNSET,
2634 [BTTV_BOARD_SUPER_TV] = {
2635 /* Rick C <cryptdragoon@gmail.com> */
2636 .name = "Super TV Tuner",
2641 .muxsel = { 2, 3, 1, 0 },
2642 .tuner_type = TUNER_PHILIPS_NTSC,
2643 .tuner_addr = ADDR_UNSET,
2644 .radio_addr = ADDR_UNSET,
2645 .gpiomask = 0x008007,
2646 .gpiomux = { 0, 0x000001,0,0 },
2650 [BTTV_BOARD_TIBET_CS16] = {
2651 /* Chris Fanning <video4linux@haydon.net> */
2652 .name = "Tibet Systems 'Progress DVR' CS16",
2657 .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2663 .tuner_addr = ADDR_UNSET,
2664 .radio_addr = ADDR_UNSET,
2665 .muxsel_hook = tibetCS16_muxsel,
2667 [BTTV_BOARD_KODICOM_4400R] = {
2668 /* Bill Brack <wbrack@mmm.com.hk> */
2670 * Note that, because of the card's wiring, the "master"
2671 * BT878A chip (i.e. the one which controls the analog switch
2672 * and must use this card type) is the 2nd one detected. The
2673 * other 3 chips should use card type 0x85, whose description
2674 * follows this one. There is a EEPROM on the card (which is
2675 * connected to the I2C of one of those other chips), but is
2676 * not currently handled. There is also a facility for a
2677 * "monitor", which is also not currently implemented.
2679 .name = "Kodicom 4400R (master)",
2684 .tuner_addr = ADDR_UNSET,
2685 .radio_addr = ADDR_UNSET,
2687 /* GPIO bits 0-9 used for analog switch:
2688 * 00 - 03: camera selector
2689 * 04 - 06: channel (controller) selector
2690 * 07: data (1->on, 0->off)
2693 * bit 16 is input from sync separator for the channel
2695 .gpiomask = 0x0003ff,
2697 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2702 .muxsel_hook = kodicom4400r_muxsel,
2704 [BTTV_BOARD_KODICOM_4400R_SL] = {
2705 /* Bill Brack <wbrack@mmm.com.hk> */
2706 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2707 * one which controls the analog switch, and must use the card type)
2708 * is the 2nd one detected. The other 3 chips should use this card
2711 .name = "Kodicom 4400R (slave)",
2716 .tuner_addr = ADDR_UNSET,
2717 .radio_addr = ADDR_UNSET,
2719 .gpiomask = 0x010000,
2721 .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2726 .muxsel_hook = kodicom4400r_muxsel,
2728 /* ---- card 0x86---------------------------------- */
2729 [BTTV_BOARD_ADLINK_RTV24] = {
2730 /* Michael Henson <mhenson@clarityvi.com> */
2731 /* Adlink RTV24 with special unlock codes */
2732 .name = "Adlink RTV24",
2737 .muxsel = { 2, 3, 1, 0 },
2739 .tuner_addr = ADDR_UNSET,
2740 .radio_addr = ADDR_UNSET,
2743 /* ---- card 0x87---------------------------------- */
2744 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2745 /* Michael Krufky <mkrufky@m1k.net> */
2746 .name = "DViCO FusionHDTV 5 Lite",
2748 .tuner_type = TUNER_LG_TDVS_H062F,
2749 .tuner_addr = ADDR_UNSET,
2750 .radio_addr = ADDR_UNSET,
2754 .muxsel = { 2, 3, 1 },
2755 .gpiomask = 0x00e00007,
2756 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2757 .gpiomute = 0x00c00007,
2763 /* ---- card 0x88---------------------------------- */
2764 [BTTV_BOARD_ACORP_Y878F] = {
2765 /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
2766 .name = "Acorp Y878F",
2771 .gpiomask = 0x01fe00,
2772 .muxsel = { 2, 3, 1, 1 },
2773 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2774 .gpiomute = 0x002000,
2777 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2778 .tuner_addr = 0xc1 >>1,
2779 .radio_addr = 0xc1 >>1,
2782 /* ---- card 0x89 ---------------------------------- */
2783 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2784 .name = "Conceptronic CTVFMi v2",
2789 .gpiomask = 0x001c0007,
2790 .muxsel = { 2, 3, 1, 1 },
2791 .gpiomux = { 0, 1, 2, 2 },
2795 .tuner_type = TUNER_TENA_9533_DI,
2796 .tuner_addr = ADDR_UNSET,
2797 .radio_addr = ADDR_UNSET,
2801 /* ---- card 0x8a ---------------------------------- */
2802 [BTTV_BOARD_PV_BT878P_2E] = {
2803 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2808 .gpiomask = 0x01fe00,
2809 .muxsel = { 2,3,1,1,-1 },
2810 .digital_mode = DIGITAL_MODE_CAMERA,
2811 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2812 .gpiomute = 0x12400,
2815 .tuner_type = TUNER_LG_PAL_FM,
2816 .tuner_addr = ADDR_UNSET,
2817 .radio_addr = ADDR_UNSET,
2820 /* ---- card 0x8b ---------------------------------- */
2821 [BTTV_BOARD_PV_M4900] = {
2822 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2823 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2829 .muxsel = { 2, 3, 1, 1 },
2830 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2834 .tuner_type = TUNER_YMEC_TVF_5533MF,
2835 .tuner_addr = ADDR_UNSET,
2836 .radio_addr = ADDR_UNSET,
2840 /* ---- card 0x8c ---------------------------------- */
2841 [BTTV_BOARD_OSPREY440] = {
2842 .name = "Osprey 440",
2849 .tuner_type = UNSET,
2850 .tuner_addr = ADDR_UNSET,
2851 .radio_addr = ADDR_UNSET,
2856 /* ---- card 0x8d ---------------------------------- */
2857 [BTTV_BOARD_ASOUND_SKYEYE] = {
2858 .name = "Asound Skyeye PCTV",
2864 .muxsel = { 2, 3, 1, 1 },
2865 .gpiomux = { 2, 0, 0, 0 },
2870 .tuner_addr = ADDR_UNSET,
2871 .radio_addr = ADDR_UNSET,
2873 /* ---- card 0x8e ---------------------------------- */
2874 [BTTV_BOARD_SABRENT_TVFM] = {
2875 .name = "Sabrent TV-FM (bttv version)",
2880 .gpiomask = 0x108007,
2881 .muxsel = { 2, 3, 1, 1 },
2882 .gpiomux = { 100000, 100002, 100002, 100000 },
2887 .tuner_type = TUNER_TNF_5335MF,
2888 .tuner_addr = ADDR_UNSET,
2891 /* ---- card 0x8f ---------------------------------- */
2892 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2893 .name = "Hauppauge ImpactVCB (bt878)",
2898 .gpiomask = 0x0f, /* old: 7 */
2899 .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */
2904 .tuner_addr = ADDR_UNSET,
2905 .radio_addr = ADDR_UNSET,
2907 [BTTV_BOARD_MACHTV_MAGICTV] = {
2908 /* Julian Calaby <julian.calaby@gmail.com>
2909 * Slightly different from original MachTV definition (0x60)
2911 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2912 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2913 * properly (methinks) causing no keyup bits being set */
2915 .name = "MagicTV", /* rebranded MachTV */
2921 .muxsel = { 2, 3, 1, 1 },
2922 .gpiomux = { 0, 1, 2, 3 },
2924 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2925 .tuner_addr = ADDR_UNSET,
2926 .radio_addr = ADDR_UNSET,
2933 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2935 /* ----------------------------------------------------------------------- */
2937 static unsigned char eeprom_data[256];
2942 void __devinit bttv_idcard(struct bttv *btv)
2944 unsigned int gpiobits;
2948 /* read PCI subsystem ID */
2949 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2950 btv->cardid = tmp << 16;
2951 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2954 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2955 /* look for the card */
2956 for (type = -1, i = 0; cards[i].id != 0; i++)
2957 if (cards[i].id == btv->cardid)
2962 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2963 "PCI subsystem ID is %04x:%04x\n",
2964 btv->c.nr,cards[type].name,cards[type].cardnr,
2965 btv->cardid & 0xffff,
2966 (btv->cardid >> 16) & 0xffff);
2967 btv->c.type = cards[type].cardnr;
2970 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2971 btv->c.nr, btv->cardid & 0xffff,
2972 (btv->cardid >> 16) & 0xffff);
2973 printk(KERN_DEBUG "please mail id, board name and "
2974 "the correct card= insmod option to video4linux-list@redhat.com\n");
2978 /* let the user override the autodetected type */
2979 if (card[btv->c.nr] < bttv_num_tvcards)
2980 btv->c.type=card[btv->c.nr];
2982 /* print which card config we are using */
2983 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2984 bttv_tvcards[btv->c.type].name, btv->c.type,
2985 card[btv->c.nr] < bttv_num_tvcards
2986 ? "insmod option" : "autodetected");
2988 /* overwrite gpio stuff ?? */
2989 if (UNSET == audioall && UNSET == audiomux[0])
2992 if (UNSET != audiomux[0]) {
2994 for (i = 0; i < 4; i++) {
2995 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2996 gpiobits |= audiomux[i];
2999 gpiobits = audioall;
3000 for (i = 0; i < 4; i++) {
3001 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3004 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3005 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3006 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3007 for (i = 0; i < 5; i++) {
3008 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3014 * (most) board specific initialisations goes here
3017 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3018 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3022 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3023 type = BTTV_BOARD_MODTEC_205;
3024 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3025 type = BTTV_BOARD_EURESYS_PICOLO;
3026 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3027 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3031 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3032 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3036 static void flyvideo_gpio(struct bttv *btv)
3038 int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3041 gpio_inout(0xffffff, 0);
3042 udelay(8); /* without this we would see the 0x1800 mask */
3044 /* FIXME: must restore OUR_EN ??? */
3046 /* all cards provide GPIO info, some have an additional eeprom
3047 * LR50: GPIO coding can be found lower right CP1 .. CP9
3048 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3050 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3052 * lowest 3 bytes are remote control codes (no handshake needed)
3053 * xxxFFF: No remote control chip soldered
3054 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3055 * Note: Some bits are Audio_Mask !
3057 ttype=(gpio&0x0f0000)>>16;
3059 case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3061 case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3063 case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3065 case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3067 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3070 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3073 has_remote = gpio & 0x800000;
3074 has_radio = gpio & 0x400000;
3075 /* unknown 0x200000;
3076 * unknown2 0x100000; */
3077 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3078 has_tda9820_tda9821 = !(gpio & 0x004000);
3079 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3081 * gpio & 0x001000 output bit for audio routing */
3084 tuner=4; /* No tuner present */
3086 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3087 btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3088 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3089 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3090 is_capture_only?"yes":"no ");
3092 if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
3093 btv->tuner_type = tuner;
3094 btv->has_radio = has_radio;
3096 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3097 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3098 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3099 if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
3100 /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
3103 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3104 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3105 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3106 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3108 static void miro_pinnacle_gpio(struct bttv *btv)
3113 gpio_inout(0xffffff, 0);
3115 id = ((gpio>>10) & 63) -1;
3116 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3118 btv->tuner_type = miro_tunermap[id];
3119 if (0 == (gpio & 0x20)) {
3121 if (!miro_fmtuner[id]) {
3122 btv->has_matchbox = 1;
3123 btv->mbox_we = (1<<6);
3124 btv->mbox_most = (1<<7);
3125 btv->mbox_clk = (1<<8);
3126 btv->mbox_data = (1<<9);
3127 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3133 if (btv->c.type == BTTV_BOARD_MIRO)
3134 btv->c.type = BTTV_BOARD_MIROPRO;
3135 if (btv->c.type == BTTV_BOARD_PINNACLE)
3136 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3139 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3140 btv->c.nr, id+1, btv->tuner_type,
3141 !btv->has_radio ? "no" :
3142 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3143 (-1 == msp) ? "no" : "yes");
3145 /* new cards with microtune tuner */
3150 info = "PAL / mono";
3151 btv->tda9887_conf = TDA9887_INTERCARRIER;
3154 info = "PAL+SECAM / stereo";
3156 btv->tda9887_conf = TDA9887_QSS;
3159 info = "NTSC / stereo";
3161 btv->tda9887_conf = TDA9887_QSS;
3164 info = "PAL+SECAM / mono";
3165 btv->tda9887_conf = TDA9887_QSS;
3168 info = "NTSC / mono";
3169 btv->tda9887_conf = TDA9887_INTERCARRIER;
3172 info = "NTSC / stereo";
3173 btv->tda9887_conf = TDA9887_INTERCARRIER;
3176 info = "PAL / stereo";
3177 btv->tda9887_conf = TDA9887_INTERCARRIER;
3180 info = "oops: unknown card";
3184 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3186 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3187 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3188 btv->tuner_type = TUNER_MT2032;
3192 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3193 #define LM1882_SYNC_DRIVE 0x200000L
3195 static void init_ids_eagle(struct bttv *btv)
3197 gpio_inout(0xffffff,0xFFFF37);
3198 gpio_write(0x200020);
3200 /* flash strobe inverter ?! */
3201 gpio_write(0x200024);
3203 /* switch sync drive off */
3204 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3206 /* set BT848 muxel to 2 */
3207 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3210 /* Muxsel helper for the IDS Eagle.
3211 * the eagles does not use the standard muxsel-bits but
3212 * has its own multiplexer */
3213 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3215 btaor((2)<<5, ~(3<<5), BT848_IFORM);
3216 gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3219 /* set chroma ADC to sleep */
3220 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3221 /* set to composite video */
3222 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3223 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3225 /* switch sync drive off */
3226 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3229 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3231 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3232 gpio_write(masks[input%4]);
3235 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3238 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3239 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3241 IN - sensor inputs, INx - sensor inputs and TI XORed together
3242 O1,O2,O3 - alarm outputs (relays)
3244 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3248 static void init_lmlbt4x(struct bttv *btv)
3250 printk(KERN_DEBUG "LMLBT4x init\n");
3251 btwrite(0x000000, BT848_GPIO_REG_INP);
3252 gpio_inout(0xffffff, 0x0006C0);
3253 gpio_write(0x000000);
3256 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3258 unsigned int inmux = input % 8;
3259 gpio_inout( 0xf, 0xf );
3260 gpio_bits( 0xf, inmux );
3263 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3265 unsigned int inmux = input % 4;
3266 gpio_inout( 3<<9, 3<<9 );
3267 gpio_bits( 3<<9, inmux<<9 );
3270 /* ----------------------------------------------------------------------- */
3272 static void bttv_reset_audio(struct bttv *btv)
3275 * BT878A has a audio-reset register.
3276 * 1. This register is an audio reset function but it is in
3277 * function-0 (video capture) address space.
3278 * 2. It is enough to do this once per power-up of the card.
3279 * 3. There is a typo in the Conexant doc -- it is not at
3280 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3281 * --//Shrikumar 030609
3287 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3288 btwrite((1<<7), 0x058);
3293 /* initialization part one -- before registering i2c bus */
3294 void __devinit bttv_init_card1(struct bttv *btv)
3296 switch (btv->c.type) {
3297 case BTTV_BOARD_HAUPPAUGE:
3298 case BTTV_BOARD_HAUPPAUGE878:
3299 boot_msp34xx(btv,5);
3301 case BTTV_BOARD_VOODOOTV_FM:
3302 boot_msp34xx(btv,20);
3304 case BTTV_BOARD_AVERMEDIA98:
3305 boot_msp34xx(btv,11);
3307 case BTTV_BOARD_HAUPPAUGEPVR:
3310 case BTTV_BOARD_TWINHAN_DST:
3311 case BTTV_BOARD_AVDVBT_771:
3312 case BTTV_BOARD_PINNACLESAT:
3313 btv->use_i2c_hw = 1;
3315 case BTTV_BOARD_ADLINK_RTV24:
3320 if (!bttv_tvcards[btv->c.type].has_dvb)
3321 bttv_reset_audio(btv);
3324 /* initialization part two -- after registering i2c bus */
3325 void __devinit bttv_init_card2(struct bttv *btv)
3328 int addr=ADDR_UNSET;
3330 btv->tuner_type = -1;
3332 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3333 bttv_readee(btv,eeprom_data,0xa0);
3334 identify_by_eeprom(btv,eeprom_data);
3337 switch (btv->c.type) {
3338 case BTTV_BOARD_MIRO:
3339 case BTTV_BOARD_MIROPRO:
3340 case BTTV_BOARD_PINNACLE:
3341 case BTTV_BOARD_PINNACLEPRO:
3343 miro_pinnacle_gpio(btv);
3345 case BTTV_BOARD_FLYVIDEO_98:
3346 case BTTV_BOARD_MAXI:
3347 case BTTV_BOARD_LIFE_FLYKIT:
3348 case BTTV_BOARD_FLYVIDEO:
3349 case BTTV_BOARD_TYPHOON_TVIEW:
3350 case BTTV_BOARD_CHRONOS_VS2:
3351 case BTTV_BOARD_FLYVIDEO_98FM:
3352 case BTTV_BOARD_FLYVIDEO2000:
3353 case BTTV_BOARD_FLYVIDEO98EZ:
3354 case BTTV_BOARD_CONFERENCETV:
3355 case BTTV_BOARD_LIFETEC_9415:
3358 case BTTV_BOARD_HAUPPAUGE:
3359 case BTTV_BOARD_HAUPPAUGE878:
3360 case BTTV_BOARD_HAUPPAUGEPVR:
3361 /* pick up some config infos from the eeprom */
3362 bttv_readee(btv,eeprom_data,0xa0);
3363 hauppauge_eeprom(btv);
3365 case BTTV_BOARD_AVERMEDIA98:
3366 case BTTV_BOARD_AVPHONE98:
3367 bttv_readee(btv,eeprom_data,0xa0);
3368 avermedia_eeprom(btv);
3370 case BTTV_BOARD_PXC200:
3373 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3374 picolo_tetra_init(btv);
3376 case BTTV_BOARD_VHX:
3378 btv->has_matchbox = 1;
3379 btv->mbox_we = 0x20;
3381 btv->mbox_clk = 0x08;
3382 btv->mbox_data = 0x10;
3383 btv->mbox_mask = 0x38;
3385 case BTTV_BOARD_VOBIS_BOOSTAR:
3386 case BTTV_BOARD_TERRATV:
3387 terratec_active_radio_upgrade(btv);
3389 case BTTV_BOARD_MAGICTVIEW061:
3390 if (btv->cardid == 0x3002144f) {
3392 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3395 case BTTV_BOARD_STB2:
3396 if (btv->cardid == 0x3060121a) {
3397 /* Fix up entry for 3DFX VoodooTV 100,
3398 which is an OEM STB card variant. */
3400 btv->tuner_type=TUNER_TEMIC_NTSC;
3403 case BTTV_BOARD_OSPREY1x0:
3404 case BTTV_BOARD_OSPREY1x0_848:
3405 case BTTV_BOARD_OSPREY101_848:
3406 case BTTV_BOARD_OSPREY1x1:
3407 case BTTV_BOARD_OSPREY1x1_SVID:
3408 case BTTV_BOARD_OSPREY2xx:
3409 case BTTV_BOARD_OSPREY2x0_SVID:
3410 case BTTV_BOARD_OSPREY2x0:
3411 case BTTV_BOARD_OSPREY500:
3412 case BTTV_BOARD_OSPREY540:
3413 case BTTV_BOARD_OSPREY2000:
3414 bttv_readee(btv,eeprom_data,0xa0);
3417 case BTTV_BOARD_IDS_EAGLE:
3418 init_ids_eagle(btv);
3420 case BTTV_BOARD_MODTEC_205:
3421 bttv_readee(btv,eeprom_data,0xa0);
3424 case BTTV_BOARD_LMLBT4:
3427 case BTTV_BOARD_TIBET_CS16:
3428 tibetCS16_init(btv);
3430 case BTTV_BOARD_KODICOM_4400R:
3431 kodicom4400r_init(btv);
3435 /* pll configuration */
3436 if (!(btv->id==848 && btv->revision==0x11)) {
3437 /* defaults from card list */
3438 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3439 btv->pll.pll_ifreq=28636363;
3440 btv->pll.pll_crystal=BT848_IFORM_XT0;
3442 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3443 btv->pll.pll_ifreq=35468950;
3444 btv->pll.pll_crystal=BT848_IFORM_XT1;
3446 /* insmod options can override */
3447 switch (pll[btv->c.nr]) {
3449 btv->pll.pll_crystal = 0;
3450 btv->pll.pll_ifreq = 0;
3451 btv->pll.pll_ofreq = 0;
3453 case 1: /* 28 MHz */
3455 btv->pll.pll_ifreq = 28636363;
3456 btv->pll.pll_ofreq = 0;
3457 btv->pll.pll_crystal = BT848_IFORM_XT0;
3459 case 2: /* 35 MHz */
3461 btv->pll.pll_ifreq = 35468950;
3462 btv->pll.pll_ofreq = 0;
3463 btv->pll.pll_crystal = BT848_IFORM_XT1;
3467 btv->pll.pll_current = -1;
3469 /* tuner configuration (from card list / autodetect / insmod option) */
3470 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3471 addr = bttv_tvcards[btv->c.type].tuner_addr;
3473 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3474 if(UNSET == btv->tuner_type)
3475 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3476 if (UNSET != tuner[btv->c.nr])
3477 btv->tuner_type = tuner[btv->c.nr];
3478 printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
3480 if (btv->tuner_type != UNSET) {
3481 struct tuner_setup tun_setup;
3483 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3484 tun_setup.type = btv->tuner_type;
3485 tun_setup.addr = addr;
3487 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3490 if (btv->tda9887_conf) {
3491 bttv_call_i2c_clients(btv, TDA9887_SET_CONFIG,
3492 &btv->tda9887_conf);
3495 btv->svhs = bttv_tvcards[btv->c.type].svhs;
3496 if (svhs[btv->c.nr] != UNSET)
3497 btv->svhs = svhs[btv->c.nr];
3498 if (remote[btv->c.nr] != UNSET)
3499 btv->has_remote = remote[btv->c.nr];
3501 if (bttv_tvcards[btv->c.type].has_radio)
3503 if (bttv_tvcards[btv->c.type].has_remote)
3505 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3507 if (bttv_tvcards[btv->c.type].audio_hook)
3508 btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook;
3510 if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3511 /* detect Bt832 chip for quartzsight digital camera */
3512 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3513 (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3520 /* try to detect audio/fader chips */
3521 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3522 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3523 request_module("msp3400");
3525 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3526 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3527 request_module("msp3400");
3529 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3530 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3531 request_module("tda9875");
3533 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3534 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3535 request_module("tda7432");
3537 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3538 request_module("tvaudio");
3542 if (btv->tda9887_conf)
3544 if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb &&
3545 bttv_I2CRead(btv, I2C_ADDR_TDA9887, "TDA9887") >=0)
3547 /* Hybrid DVB card, DOES have a tda9887 */
3548 if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE)
3550 if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) ||
3551 (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) ||
3552 (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) ||
3554 request_module("tda9887");
3555 if (btv->tuner_type != UNSET)
3556 request_module("tuner");
3560 /* ----------------------------------------------------------------------- */
3562 static void modtec_eeprom(struct bttv *btv)
3564 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3565 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3566 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3567 btv->c.nr,&eeprom_data[0x1e]);
3568 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3569 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3570 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3571 btv->c.nr,&eeprom_data[0x1e]);
3572 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3573 btv->tuner_type=TUNER_PHILIPS_NTSC;
3574 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3575 btv->c.nr,&eeprom_data[0x1e]);
3577 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3578 btv->c.nr,&eeprom_data[0x1e]);
3582 static void __devinit hauppauge_eeprom(struct bttv *btv)
3586 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3587 btv->tuner_type = tv.tuner_type;
3588 btv->has_radio = tv.has_radio;
3590 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3591 btv->c.nr, tv.model);
3594 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3595 * type based on model #.
3597 if(tv.model == 64900) {
3598 printk("bttv%d: Switching board type from %s to %s\n",
3600 bttv_tvcards[btv->c.type].name,
3601 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3602 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3606 static int terratec_active_radio_upgrade(struct bttv *btv)
3611 btv->has_matchbox = 1;
3612 btv->mbox_we = 0x10;
3613 btv->mbox_most = 0x20;
3614 btv->mbox_clk = 0x08;
3615 btv->mbox_data = 0x04;
3616 btv->mbox_mask = 0x3c;
3618 btv->mbox_iow = 1 << 8;
3619 btv->mbox_ior = 1 << 9;
3620 btv->mbox_csel = 1 << 10;
3623 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3624 if (0x1ed8 == tea5757_read(btv)) {
3625 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3628 btv->has_matchbox = 1;
3631 btv->has_matchbox = 0;
3637 /* ----------------------------------------------------------------------- */
3640 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3642 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3643 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3644 * unpacked with unzip).
3646 #define PVR_GPIO_DELAY 10
3648 #define BTTV_ALT_DATA 0x000001
3649 #define BTTV_ALT_DCLK 0x100000
3650 #define BTTV_ALT_NCONFIG 0x800000
3652 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3658 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3660 udelay(PVR_GPIO_DELAY);
3662 gpio_write(BTTV_ALT_NCONFIG);
3663 udelay(PVR_GPIO_DELAY);
3665 for (n = 0; n < microlen; n++) {
3667 for ( i = 0 ; i < 8 ; i++ ) {
3668 gpio_bits(BTTV_ALT_DCLK,0);
3670 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3672 gpio_bits(BTTV_ALT_DATA,0);
3673 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3677 gpio_bits(BTTV_ALT_DCLK,0);
3678 udelay(PVR_GPIO_DELAY);
3680 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3681 for (i = 0 ; i < 30 ; i++) {
3682 gpio_bits(BTTV_ALT_DCLK,0);
3683 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3685 gpio_bits(BTTV_ALT_DCLK,0);
3689 static int __devinit pvr_boot(struct bttv *btv)
3691 const struct firmware *fw_entry;
3694 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3696 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3700 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3701 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3702 btv->c.nr, (rc < 0) ? "failed" : "ok");
3703 release_firmware(fw_entry);
3707 /* ----------------------------------------------------------------------- */
3708 /* some osprey specific stuff */
3710 static void __devinit osprey_eeprom(struct bttv *btv)
3713 unsigned char *ee = eeprom_data;
3714 unsigned long serial = 0;
3716 if (btv->c.type == 0) {
3717 /* this might be an antique... check for MMAC label in eeprom */
3718 if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) {
3719 unsigned char checksum = 0;
3720 for (i =0; i<21; i++)
3722 if (checksum != ee[21])
3724 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3725 for (i = 12; i < 21; i++)
3726 serial *= 10, serial += ee[i] - '0';
3729 unsigned short type;
3732 for(; offset < 8*16; offset += 16) {
3733 unsigned short checksum = 0;
3734 /* verify the checksum */
3735 for(i = 0; i<14; i++) checksum += ee[i+offset];
3736 checksum = ~checksum; /* no idea why */
3737 if ((((checksum>>8)&0x0FF) == ee[offset+14]) &&
3738 ((checksum & 0x0FF) == ee[offset+15])) {
3746 /* found a valid descriptor */
3747 type = (ee[offset+4]<<8) | (ee[offset+5]);
3753 btv->c.type = BTTV_BOARD_OSPREY1x0_848;
3756 btv->c.type = BTTV_BOARD_OSPREY101_848;
3762 btv->c.type = BTTV_BOARD_OSPREY1x0;
3766 btv->c.type = BTTV_BOARD_OSPREY1x1;
3771 btv->c.type = BTTV_BOARD_OSPREY1x1_SVID;
3777 btv->c.type = BTTV_BOARD_OSPREY2xx;
3781 btv->c.type = BTTV_BOARD_OSPREY2x0_SVID;
3784 btv->c.type = BTTV_BOARD_OSPREY500;
3788 btv->c.type = BTTV_BOARD_OSPREY540;
3789 /* bttv_osprey_540_init(btv); */
3793 btv->c.type = BTTV_BOARD_OSPREY2x0;
3794 /* enable output on select control lines */
3795 gpio_inout(0xffffff,0x000303);
3798 /* unknown...leave generic, but get serial # */
3801 serial = (ee[offset+6] << 24)
3802 | (ee[offset+7] << 16)
3803 | (ee[offset+8] << 8)
3807 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d name=%s serial=%ld\n",
3808 btv->c.nr, btv->c.type, bttv_tvcards[btv->c.type].name,serial);
3811 /* ----------------------------------------------------------------------- */
3812 /* AVermedia specific stuff, from bktr_card.c */
3814 static int tuner_0_table[] = {
3815 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3816 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3817 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3818 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3819 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3820 TUNER_PHILIPS_FM1216ME_MK3 };
3822 static int tuner_1_table[] = {
3823 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3824 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3825 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3826 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3827 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3829 static void __devinit avermedia_eeprom(struct bttv *btv)
3831 int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3833 tuner_make = (eeprom_data[0x41] & 0x7);
3834 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3835 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3836 btv->has_remote = (eeprom_data[0x42] & 0x01);
3838 if (tuner_make == 0 || tuner_make == 2)
3839 if(tuner_format <=0x0a)
3840 tuner = tuner_0_table[tuner_format];
3841 if (tuner_make == 1)
3842 if(tuner_format <=9)
3843 tuner = tuner_1_table[tuner_format];
3845 if (tuner_make == 4)
3846 if(tuner_format == 0x09)
3847 tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3849 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3850 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3852 btv->tuner_type=tuner;
3855 printk("Unknown type");
3856 printk(" radio:%s remote control:%s\n",
3857 tuner_tv_fm ? "yes" : "no",
3858 btv->has_remote ? "yes" : "no");
3861 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3862 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3864 /* fix up our card entry */
3865 if(norm==VIDEO_MODE_NTSC) {
3866 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3867 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3868 dprintk("bttv_tda9880_setnorm to NTSC\n");
3871 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3872 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3873 dprintk("bttv_tda9880_setnorm to PAL\n");
3875 /* set GPIO according */
3876 gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3877 bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3882 * reset/enable the MSP on some Hauppauge cards
3883 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3888 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3890 int mask = (1 << pin);
3892 gpio_inout(mask,mask);
3895 gpio_bits(mask,mask);
3898 bttv_gpio_tracking(btv,"msp34xx");
3900 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3901 "init [%d]\n", btv->c.nr, pin);
3904 static void __devinit boot_bt832(struct bttv *btv)
3908 /* ----------------------------------------------------------------------- */
3909 /* Imagenation L-Model PXC200 Framegrabber */
3910 /* This is basically the same procedure as
3911 * used by Alessandro Rubini in his pxc200
3912 * driver, but using BTTV functions */
3914 static void __devinit init_PXC200(struct bttv *btv)
3916 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3917 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3923 /* Initialise GPIO-connevted stuff */
3924 gpio_inout(0xffffff, (1<<13));
3928 /* GPIO inputs are pulled up, so no need to drive
3929 * reset pin any longer */
3930 gpio_bits(0xffffff, 0);
3932 bttv_gpio_tracking(btv,"pxc200");
3934 /* we could/should try and reset/control the AD pots? but
3935 right now we simply turned off the crushing. Without
3936 this the AGC drifts drifts
3937 remember the EN is reverse logic -->
3938 setting BT848_ADC_AGC_EN disable the AGC
3939 tboult@eecs.lehigh.edu
3942 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3944 /* Initialise MAX517 DAC */
3945 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3946 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3948 /* Initialise 12C508 PIC */
3949 /* The I2CWrite and I2CRead commmands are actually to the
3950 * same chips - but the R/W bit is included in the address
3951 * argument so the numbers are different */
3954 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3956 /* First of all, enable the clock line. This is used in the PXC200-F */
3957 val = btread(BT848_GPIO_DMA_CTL);
3958 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3959 btwrite(val, BT848_GPIO_DMA_CTL);
3961 /* Then, push to 0 the reset pin long enough to reset the *
3962 * device same as above for the reset line, but not the same
3963 * value sent to the GPIO-connected stuff
3964 * which one is the good one? */
3965 gpio_inout(0xffffff,(1<<2));
3970 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3971 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3974 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3975 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3979 printk(KERN_INFO "PXC200 Initialised.\n");
3984 /* ----------------------------------------------------------------------- */
3986 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
3987 * it. This apparently involves the following procedure for each 878 chip:
3989 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
3991 * 2) write to GPIO_DATA
3997 * read from GPIO_DATA into buf (uint_32)
3998 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
3999 * error. ERROR_CPLD_Check_Failed stop.
4001 * 3) write to GPIO_DATA
4002 * - write 0x4400 + 0x0E
4004 * - write 0x4410 + 0x0E
4007 * read from GPIO_DATA into buf (uint_32)
4008 * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 )
4009 * error. ERROR_CPLD_Check_Failed.
4011 /* ----------------------------------------------------------------------- */
4013 init_RTV24 (struct bttv *btv)
4015 uint32_t dataRead = 0;
4016 long watchdog_value = 0x0E;
4019 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4022 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4024 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4026 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4028 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4030 dataRead = btread (BT848_GPIO_DATA);
4032 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4034 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4035 btv->c.nr, dataRead);
4038 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4040 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4042 btwrite (watchdog_value, BT848_GPIO_DATA);
4044 dataRead = btread (BT848_GPIO_DATA);
4046 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4048 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4049 btv->c.nr, dataRead);
4055 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4060 /* ----------------------------------------------------------------------- */
4061 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4063 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4064 * This code is placed under the terms of the GNU General Public License
4066 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4069 static void bus_low(struct bttv *btv, int bit)
4071 if (btv->mbox_ior) {
4072 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4073 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4080 if (btv->mbox_ior) {
4081 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4086 static void bus_high(struct bttv *btv, int bit)
4088 if (btv->mbox_ior) {
4089 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4090 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4097 if (btv->mbox_ior) {
4098 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4103 static int bus_in(struct bttv *btv, int bit)
4105 if (btv->mbox_ior) {
4106 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4107 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4110 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4113 return gpio_read() & (bit);
4116 /* TEA5757 register bits */
4117 #define TEA_FREQ 0:14
4118 #define TEA_BUFFER 15:15
4120 #define TEA_SIGNAL_STRENGTH 16:17
4122 #define TEA_PORT1 18:18
4123 #define TEA_PORT0 19:19
4125 #define TEA_BAND 20:21
4126 #define TEA_BAND_FM 0
4127 #define TEA_BAND_MW 1
4128 #define TEA_BAND_LW 2
4129 #define TEA_BAND_SW 3
4131 #define TEA_MONO 22:22
4132 #define TEA_ALLOW_STEREO 0
4133 #define TEA_FORCE_MONO 1
4135 #define TEA_SEARCH_DIRECTION 23:23
4136 #define TEA_SEARCH_DOWN 0
4137 #define TEA_SEARCH_UP 1
4139 #define TEA_STATUS 24:24
4140 #define TEA_STATUS_TUNED 0
4141 #define TEA_STATUS_SEARCHING 1
4143 /* Low-level stuff */
4144 static int tea5757_read(struct bttv *btv)
4146 unsigned long timeout;
4150 /* better safe than sorry */
4151 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4153 if (btv->mbox_ior) {
4154 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4155 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4160 bttv_gpio_tracking(btv,"tea5757 read");
4162 bus_low(btv,btv->mbox_we);
4163 bus_low(btv,btv->mbox_clk);
4166 timeout= jiffies + HZ;
4168 /* wait for DATA line to go low; error if it doesn't */
4169 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4171 if (bus_in(btv,btv->mbox_data)) {
4172 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4176 dprintk("bttv%d: tea5757:",btv->c.nr);
4177 for(i = 0; i < 24; i++)
4180 bus_high(btv,btv->mbox_clk);
4182 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4183 bus_low(btv,btv->mbox_clk);
4185 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4186 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4188 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4192 static int tea5757_write(struct bttv *btv, int value)
4197 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4199 if (btv->mbox_ior) {
4200 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4201 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4205 bttv_gpio_tracking(btv,"tea5757 write");
4207 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4208 bus_low(btv,btv->mbox_clk);
4209 bus_high(btv,btv->mbox_we);
4210 for(i = 0; i < 25; i++)
4212 if (reg & 0x1000000)
4213 bus_high(btv,btv->mbox_data);
4215 bus_low(btv,btv->mbox_data);
4217 bus_high(btv,btv->mbox_clk);
4219 bus_low(btv,btv->mbox_clk);
4222 bus_low(btv,btv->mbox_we); /* unmute !!! */
4226 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4228 dprintk("tea5757_set_freq %d\n",freq);
4229 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4233 /* ----------------------------------------------------------------------- */
4236 static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
4238 /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
4239 int bits_out, loops, vol, data;
4242 /* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
4243 v->flags |= VIDEO_AUDIO_VOLUME;
4247 /* 32 levels logarithmic */
4248 vol = 32 - ((v->volume>>11));
4250 bits_out = (PT2254_DBS_IN_2>>(vol%5));
4252 bits_out |= (PT2254_DBS_IN_10>>(vol/5));
4253 bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
4255 data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
4256 WINVIEW_PT2254_STROBE);
4257 for (loops = 17; loops >= 0 ; loops--) {
4258 if (bits_out & (1<<loops))
4259 data |= WINVIEW_PT2254_DATA;
4261 data &= ~WINVIEW_PT2254_DATA;
4264 data |= WINVIEW_PT2254_CLK;
4267 data &= ~WINVIEW_PT2254_CLK;
4270 data |= WINVIEW_PT2254_STROBE;
4271 data &= ~WINVIEW_PT2254_DATA;
4274 data &= ~WINVIEW_PT2254_STROBE;
4278 /* ----------------------------------------------------------------------- */
4279 /* mono/stereo control for various cards (which don't use i2c chips but */
4280 /* connect something to the GPIO pins */
4283 gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
4285 unsigned int con = 0;
4288 gpio_inout(0x300, 0x300);
4289 if (v->mode & VIDEO_SOUND_LANG1)
4291 if (v->mode & VIDEO_SOUND_LANG2)
4293 if (v->mode & VIDEO_SOUND_STEREO)
4295 /* if (v->mode & VIDEO_SOUND_MONO)
4297 gpio_bits(0x300, con);
4299 v->mode = VIDEO_SOUND_STEREO |
4300 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4305 gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
4307 unsigned int val, con;
4309 if (btv->radio_user)
4315 if (v->mode & VIDEO_SOUND_LANG2) {
4316 if (v->mode & VIDEO_SOUND_LANG1) {
4325 if (con != (val & 0x300)) {
4326 gpio_bits(0x300, con);
4328 bttv_gpio_tracking(btv,"gvbctv5pci");
4331 switch (val & 0x70) {
4333 v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4336 v->mode = VIDEO_SOUND_LANG2;
4339 v->mode = VIDEO_SOUND_LANG1;
4342 v->mode = VIDEO_SOUND_STEREO;
4345 v->mode = VIDEO_SOUND_MONO;
4348 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4349 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4355 * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
4356 * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
4357 * 0xdde enables mono and 0xccd enables sap
4359 * Petr Vandrovec <VANDROVE@vc.cvut.cz>
4360 * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
4361 * input/output sound connection, so both must be set for output mode.
4363 * Looks like it's needed only for the "tvphone", the "tvphone 98"
4364 * handles this with a tda9840
4368 avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
4373 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4375 if (v->mode & VIDEO_SOUND_STEREO)
4378 gpio_bits(0x03,val);
4380 bttv_gpio_tracking(btv,"avermedia");
4383 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4390 avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
4395 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4397 if (v->mode & VIDEO_SOUND_STEREO) /* STEREO */
4399 btaor(val, ~0x03, BT848_GPIO_DATA);
4401 bttv_gpio_tracking(btv,"avermedia");
4403 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4404 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4409 /* Lifetec 9415 handling */
4411 lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
4415 if (gpio_read() & 0x4000) {
4416 v->mode = VIDEO_SOUND_MONO;
4421 if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */
4423 if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
4425 if ((v->mode & VIDEO_SOUND_LANG1) ||
4426 (v->mode & VIDEO_SOUND_MONO))
4428 gpio_bits(0x0880, val);
4430 bttv_gpio_tracking(btv,"lt9415");
4432 /* autodetect doesn't work with this card :-( */
4433 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4434 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4439 /* TDA9821 on TerraTV+ Bt848, Bt878 */
4441 terratv_audio(struct bttv *btv, struct video_audio *v, int set)
4443 unsigned int con = 0;
4446 gpio_inout(0x180000,0x180000);
4447 if (v->mode & VIDEO_SOUND_LANG2)
4449 if (v->mode & VIDEO_SOUND_STEREO)
4451 gpio_bits(0x180000, con);
4453 bttv_gpio_tracking(btv,"terratv");
4455 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4456 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4461 winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
4463 unsigned long val = 0;
4466 /*btor (0xc32000, BT848_GPIO_OUT_EN);*/
4467 if (v->mode & VIDEO_SOUND_MONO) /* Mono */
4469 if (v->mode & VIDEO_SOUND_LANG1) /* Mono */
4471 if (v->mode & VIDEO_SOUND_LANG2) /* SAP */
4473 if (v->mode & VIDEO_SOUND_STEREO) /* Stereo */
4476 gpio_bits(0x430000, val);
4478 bttv_gpio_tracking(btv,"winfast2000");
4481 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4482 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4487 * Dariusz Kowalewski <darekk@automex.pl>
4488 * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
4489 * revision 9B has on-board TDA9874A sound decoder).
4491 * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
4492 * will mute this cards.
4495 pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
4497 unsigned int val = 0;
4499 if (btv->radio_user)
4503 if (v->mode & VIDEO_SOUND_MONO) {
4506 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4507 || (v->mode & VIDEO_SOUND_STEREO)) {
4511 gpio_bits(0x03,val);
4513 bttv_gpio_tracking(btv,"pvbt878p9b");
4516 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4517 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4522 * Dariusz Kowalewski <darekk@automex.pl>
4523 * sound control for FlyVideo 2000S (with tda9874 decoder)
4524 * based on pvbt878p9b_audio() - this is not tested, please fix!!!
4527 fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
4529 unsigned int val = 0xffff;
4531 if (btv->radio_user)
4534 if (v->mode & VIDEO_SOUND_MONO) {
4537 if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
4538 || (v->mode & VIDEO_SOUND_STEREO)) {
4539 val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
4541 if (val != 0xffff) {
4542 gpio_bits(0x1800, val);
4544 bttv_gpio_tracking(btv,"fv2000s");
4547 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4548 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4553 * sound control for Canopus WinDVR PCI
4554 * Masaki Suzuki <masaki@btree.org>
4557 windvr_audio(struct bttv *btv, struct video_audio *v, int set)
4559 unsigned long val = 0;
4562 if (v->mode & VIDEO_SOUND_MONO)
4564 if (v->mode & VIDEO_SOUND_LANG1)
4566 if (v->mode & VIDEO_SOUND_LANG2)
4568 if (v->mode & VIDEO_SOUND_STEREO)
4571 gpio_bits(0x140000, val);
4573 bttv_gpio_tracking(btv,"windvr");
4576 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4577 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4582 * sound control for AD-TVK503
4583 * Hiroshi Takekawa <sian@big.or.jp>
4586 adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
4588 unsigned int con = 0xffffff;
4590 /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
4593 /* btor(***, BT848_GPIO_OUT_EN); */
4594 if (v->mode & VIDEO_SOUND_LANG1)
4596 if (v->mode & VIDEO_SOUND_LANG2)
4598 if (v->mode & VIDEO_SOUND_STEREO)
4600 if (v->mode & VIDEO_SOUND_MONO)
4602 if (con != 0xffffff) {
4603 gpio_bits(0x1e0000,con);
4605 bttv_gpio_tracking(btv, "adtvk503");
4608 v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
4609 VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
4613 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4615 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4616 * switch instead (CD22M3494E). This IC can have multiple active connections
4617 * between Xn (input) and Yn (output) pins. We need to clear any existing
4618 * connection prior to establish a new one, pulsing the STROBE pin.
4620 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4621 * GPIO pins are wired as:
4622 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroler)
4623 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroler)
4624 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroler)
4625 * GPIO[8] - - P3[5] (microcontroler)
4626 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroler)
4627 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroler)
4628 * GPINTR - - P3[4] (microcontroler)
4630 * The microcontroler is a 80C32 like. It should be possible to change xpoint
4631 * configuration either directly (as we are doing) or using the microcontroler
4632 * which is also wired to I2C interface. I have no further info on the
4633 * microcontroler features, one would need to disassembly the firmware.
4634 * note: the vendor refused to give any information on this product, all
4635 * that stuff was found using a multimeter! :)
4637 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4639 /* reset all conections */
4640 gpio_bits(0x200,0x200);
4642 gpio_bits(0x200,0x000);
4645 /* create a new conection */
4646 gpio_bits(0x480,0x080);
4647 gpio_bits(0x480,0x480);
4649 gpio_bits(0x480,0x080);
4653 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4655 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4656 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4657 * chips, ten eight input analog multiplexors, a not chip and a few
4660 * 16 inputs on a secondary bracket are provided and can be selected
4661 * from each of the four capture chips. Two of the eight input
4662 * multiplexors are used to select from any of the 16 input signals.
4664 * Unsupported hardware capabilities:
4665 * . A video output monitor on the secondary bracket can be selected from
4666 * one of the 878A chips.
4667 * . Another passthrough but I haven't spent any time investigating it.
4668 * . Digital I/O (logic level connected to GPIO) is available from an
4671 * The on chip input mux should always be set to 2.
4672 * GPIO[16:19] - Video input selection
4673 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4674 * GPIO[?:?] - Digital I/O.
4676 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4677 * determined what function (if any) it provides. With the microcontroller
4678 * and sync seperator chips a guess is that it might have to do with video
4679 * switching and maybe some digital I/O.
4681 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4684 gpio_bits(0x0f0000, input << 16);
4687 static void tibetCS16_init(struct bttv *btv)
4689 /* enable gpio bits, mask obtained via btSpy */
4690 gpio_inout(0xffffff, 0x0f7fff);
4691 gpio_write(0x0f7fff);
4695 * The following routines for the Kodicom-4400r get a little mind-twisting.
4696 * There is a "master" controller and three "slave" controllers, together
4697 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4698 * The analog switch is controlled by the "master", but the detection order
4699 * of the four BT878A chips is in an order which I just don't understand.
4700 * The "master" is actually the second controller to be detected. The
4701 * logic on the board uses logical numbers for the 4 controlers, but
4702 * those numbers are different from the detection sequence. When working
4703 * with the analog switch, we need to "map" from the detection sequence
4704 * over to the board's logical controller number. This mapping sequence
4705 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4706 * unit 3, the second (which is the master) is logical unit 0, etc.
4707 * We need to maintain the status of the analog switch (which of the 16
4708 * cameras is connected to which of the 4 controllers). Rather than
4709 * add to the bttv structure for this, we use the data reserved for
4710 * the mbox (unused for this card type).
4714 * First a routine to set the analog switch, which controls which camera
4715 * is routed to which controller. The switch comprises an X-address
4716 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4717 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4718 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4719 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4720 * specified address. The idea is to set the address and data, then bring
4721 * STROBE high, and finally bring STROBE back to low.
4723 static void kodicom4400r_write(struct bttv *btv,
4724 unsigned char xaddr,
4725 unsigned char yaddr,
4726 unsigned char data) {
4729 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4730 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4731 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4732 gpio_bits(0x1ff, udata); /* strobe low */
4736 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4737 * use this routine. The routine finds the "master" for the card, maps
4738 * the controller number from the detected position over to the logical
4739 * number, writes the appropriate data to the analog switch, and housekeeps
4740 * the local copy of the switch information. The parameter 'input' is the
4741 * requested camera number (0 - 15).
4743 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4748 static unsigned char map[4] = {3, 0, 2, 1};
4750 mctlr = master[btv->c.nr];
4751 if (mctlr == NULL) { /* ignore if master not yet detected */
4754 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4756 sw_status = (char *)(&mctlr->mbox_we);
4757 xaddr = input & 0xf;
4758 /* Check if the controller/camera pair has changed, else ignore */
4759 if (sw_status[yaddr] != xaddr)
4761 /* "open" the old switch, "close" the new one, save the new */
4762 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4763 sw_status[yaddr] = xaddr;
4764 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4769 * During initialisation, we need to reset the analog switch. We
4770 * also preset the switch to map the 4 connectors on the card to the
4771 * *user's* (see above description of kodicom4400r_muxsel) channels
4774 static void kodicom4400r_init(struct bttv *btv)
4776 char *sw_status = (char *)(&btv->mbox_we);
4779 gpio_inout(0x0003ff, 0x0003ff);
4780 gpio_write(1 << 9); /* reset MUX */
4782 /* Preset camera 0 to the 4 controllers */
4783 for (ix=0; ix<4; ix++) {
4785 kodicom4400r_write(btv, ix, ix, 1);
4788 * Since this is the "master", we need to set up the
4789 * other three controller chips' pointers to this structure
4790 * for later use in the muxsel routine.
4792 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4794 master[btv->c.nr-1] = btv;
4795 master[btv->c.nr] = btv;
4796 master[btv->c.nr+1] = btv;
4797 master[btv->c.nr+2] = btv;
4800 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4801 * video multiplexers to provide up to 16 video inputs. These
4802 * multiplexers are controlled by the lower 8 GPIO pins of the
4803 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4805 * xxx0 is pin xxx of multiplexer U5,
4806 * yyy1 is pin yyy of multiplexer U2
4818 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4820 static const int masks[] = {
4821 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4822 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4823 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4824 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4826 gpio_write(masks[input%16]);
4828 static void picolo_tetra_init(struct bttv *btv)
4830 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4831 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4832 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4834 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4837 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4838 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4839 /*GPIO[20]&GPIO[21] used to choose the right input*/
4840 btwrite (input<<20,BT848_GPIO_DATA);
4845 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4847 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4848 * swichers to provide 16 channels to MUX0. The TDA8540's have
4849 * 4 indepedant outputs and as such the IVC120G also has the
4850 * optional "Monitor Out" bus. This allows the card to be looking
4851 * at one input while the monitor is looking at another.
4853 * Since I've couldn't be bothered figuring out how to add an
4854 * independant muxsel for the monitor bus, I've just set it to
4855 * whatever the card is looking at.
4857 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4858 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4860 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4861 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4862 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4863 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4867 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4868 #define I2C_TDA8540 0x90
4869 #define I2C_TDA8540_ALT1 0x92
4870 #define I2C_TDA8540_ALT2 0x94
4871 #define I2C_TDA8540_ALT3 0x96
4872 #define I2C_TDA8540_ALT4 0x98
4873 #define I2C_TDA8540_ALT5 0x9a
4874 #define I2C_TDA8540_ALT6 0x9c
4876 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4879 int key = input % 4;
4880 int matrix = input / 4;
4882 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4883 btv->c.nr, input, matrix, key);
4885 /* Handles the input selection on the TDA8540's */
4886 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4887 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4888 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4889 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4890 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4891 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4892 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4893 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4895 /* Handles the output enables on the TDA8540's */
4896 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4897 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4898 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4899 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4900 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4901 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4902 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4903 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4905 /* Selects MUX0 for input on the 878 */
4906 btaor((0)<<5, ~(3<<5), BT848_IFORM);
4910 /* PXC200 muxsel helper
4911 * luke@syseng.anu.edu.au
4912 * another transplant
4913 * from Alessandro Rubini (rubini@linux.it)
4915 * There are 4 kinds of cards:
4916 * PXC200L which is bt848
4917 * PXC200F which is bt848 with PIC controlling mux
4918 * PXC200AL which is bt878
4919 * PXC200AF which is bt878 with PIC controlling mux
4921 #define PX_CFG_PXC200F 0x01
4922 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4923 #define PX_I2C_PIC 0x0f
4924 #define PX_PXC200A_CARDID 0x200a1295
4925 #define PX_I2C_CMD_CFG 0x00
4927 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4932 unsigned char buf[2];
4934 /* Read PIC config to determine if this is a PXC200F */
4938 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4940 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4941 /* not PXC ? do nothing */
4945 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4946 if (!(rc & PX_CFG_PXC200F)) {
4947 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4952 /* The multiplexer in the 200F is handled by the GPIO port */
4953 /* get correct mapping between inputs */
4954 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4955 /* ** not needed!? */
4958 /* make sure output pins are enabled */
4959 /* bitmask=0x30f; */
4961 /* check whether we have a PXC200A */
4962 if (btv->cardid == PX_PXC200A_CARDID) {
4963 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4964 bitmask |= 7<<4; /* the DAC */
4966 btwrite(bitmask, BT848_GPIO_OUT_EN);
4968 bitmask = btread(BT848_GPIO_DATA);
4969 if (btv->cardid == PX_PXC200A_CARDID)
4970 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4971 else /* older device */
4972 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4973 btwrite(bitmask,BT848_GPIO_DATA);
4976 * Was "to be safe, set the bt848 to input 0"
4977 * Actually, since it's ok at load time, better not messing
4978 * with these bits (on PXC200AF you need to set mux 2 here)
4980 * needed because bttv-driver sets mux before calling this function
4982 if (btv->cardid == PX_PXC200A_CARDID)
4983 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4984 else /* older device */
4985 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4987 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4990 /* ----------------------------------------------------------------------- */
4991 /* motherboard chipset specific stuff */
4993 void __devinit bttv_check_chipset(void)
4995 int pcipci_fail = 0;
4996 struct pci_dev *dev = NULL;
4998 if (pci_pci_problems & PCIPCI_FAIL)
5000 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
5002 if (pci_pci_problems & PCIPCI_VSFX)
5004 #ifdef PCIPCI_ALIMAGIK
5005 if (pci_pci_problems & PCIPCI_ALIMAGIK)
5010 /* print warnings about any quirks found */
5012 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
5014 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
5016 printk(KERN_INFO "bttv: bttv and your chipset may not work "
5019 printk(KERN_INFO "bttv: overlay will be disabled.\n");
5022 printk(KERN_INFO "bttv: overlay forced. Use this "
5023 "option at your own risk.\n");
5026 if (UNSET != latency)
5027 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
5028 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
5029 PCI_DEVICE_ID_INTEL_82441, dev))) {
5031 pci_read_config_byte(dev, 0x53, &b);
5033 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
5034 "bufcon=0x%02x\n",b);
5038 int __devinit bttv_handle_chipset(struct bttv *btv)
5040 unsigned char command;
5042 if (!triton1 && !vsfx && UNSET == latency)
5047 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
5048 if (vsfx && btv->id >= 878)
5049 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
5050 if (UNSET != latency)
5051 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
5055 if (btv->id < 878) {
5056 /* bt848 (mis)uses a bit in the irq mask for etbf */
5058 btv->triton1 = BT848_INT_ETBF;
5060 /* bt878 has a bit in the pci config space for it */
5061 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
5063 command |= BT878_EN_TBFX;
5065 command |= BT878_EN_VSFX;
5066 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
5068 if (UNSET != latency)
5069 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
projects / linux-2.6 / blob