Pull Kconfig into release branch
[linux-2.6] / drivers / scsi / aic7xxx / aic79xx_core.c
1 /*
2  * Core routines and tables shareable across OS platforms.
3  *
4  * Copyright (c) 1994-2002 Justin T. Gibbs.
5  * Copyright (c) 2000-2003 Adaptec Inc.
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions, and the following disclaimer,
13  *    without modification.
14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
15  *    substantially similar to the "NO WARRANTY" disclaimer below
16  *    ("Disclaimer") and any redistribution must be conditioned upon
17  *    including a substantially similar Disclaimer requirement for further
18  *    binary redistribution.
19  * 3. Neither the names of the above-listed copyright holders nor the names
20  *    of any contributors may be used to endorse or promote products derived
21  *    from this software without specific prior written permission.
22  *
23  * Alternatively, this software may be distributed under the terms of the
24  * GNU General Public License ("GPL") version 2 as published by the Free
25  * Software Foundation.
26  *
27  * NO WARRANTY
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
31  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
36  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
37  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38  * POSSIBILITY OF SUCH DAMAGES.
39  *
40  * $Id: //depot/aic7xxx/aic7xxx/aic79xx.c#250 $
41  */
42
43 #ifdef __linux__
44 #include "aic79xx_osm.h"
45 #include "aic79xx_inline.h"
46 #include "aicasm/aicasm_insformat.h"
47 #else
48 #include <dev/aic7xxx/aic79xx_osm.h>
49 #include <dev/aic7xxx/aic79xx_inline.h>
50 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
51 #endif
52
53
54 /***************************** Lookup Tables **********************************/
55 char *ahd_chip_names[] =
56 {
57         "NONE",
58         "aic7901",
59         "aic7902",
60         "aic7901A"
61 };
62 static const u_int num_chip_names = NUM_ELEMENTS(ahd_chip_names);
63
64 /*
65  * Hardware error codes.
66  */
67 struct ahd_hard_error_entry {
68         uint8_t errno;
69         char *errmesg;
70 };
71
72 static struct ahd_hard_error_entry ahd_hard_errors[] = {
73         { DSCTMOUT,     "Discard Timer has timed out" },
74         { ILLOPCODE,    "Illegal Opcode in sequencer program" },
75         { SQPARERR,     "Sequencer Parity Error" },
76         { DPARERR,      "Data-path Parity Error" },
77         { MPARERR,      "Scratch or SCB Memory Parity Error" },
78         { CIOPARERR,    "CIOBUS Parity Error" },
79 };
80 static const u_int num_errors = NUM_ELEMENTS(ahd_hard_errors);
81
82 static struct ahd_phase_table_entry ahd_phase_table[] =
83 {
84         { P_DATAOUT,    MSG_NOOP,               "in Data-out phase"     },
85         { P_DATAIN,     MSG_INITIATOR_DET_ERR,  "in Data-in phase"      },
86         { P_DATAOUT_DT, MSG_NOOP,               "in DT Data-out phase"  },
87         { P_DATAIN_DT,  MSG_INITIATOR_DET_ERR,  "in DT Data-in phase"   },
88         { P_COMMAND,    MSG_NOOP,               "in Command phase"      },
89         { P_MESGOUT,    MSG_NOOP,               "in Message-out phase"  },
90         { P_STATUS,     MSG_INITIATOR_DET_ERR,  "in Status phase"       },
91         { P_MESGIN,     MSG_PARITY_ERROR,       "in Message-in phase"   },
92         { P_BUSFREE,    MSG_NOOP,               "while idle"            },
93         { 0,            MSG_NOOP,               "in unknown phase"      }
94 };
95
96 /*
97  * In most cases we only wish to itterate over real phases, so
98  * exclude the last element from the count.
99  */
100 static const u_int num_phases = NUM_ELEMENTS(ahd_phase_table) - 1;
101
102 /* Our Sequencer Program */
103 #include "aic79xx_seq.h"
104
105 /**************************** Function Declarations ***************************/
106 static void             ahd_handle_transmission_error(struct ahd_softc *ahd);
107 static void             ahd_handle_lqiphase_error(struct ahd_softc *ahd,
108                                                   u_int lqistat1);
109 static int              ahd_handle_pkt_busfree(struct ahd_softc *ahd,
110                                                u_int busfreetime);
111 static int              ahd_handle_nonpkt_busfree(struct ahd_softc *ahd);
112 static void             ahd_handle_proto_violation(struct ahd_softc *ahd);
113 static void             ahd_force_renegotiation(struct ahd_softc *ahd,
114                                                 struct ahd_devinfo *devinfo);
115
116 static struct ahd_tmode_tstate*
117                         ahd_alloc_tstate(struct ahd_softc *ahd,
118                                          u_int scsi_id, char channel);
119 #ifdef AHD_TARGET_MODE
120 static void             ahd_free_tstate(struct ahd_softc *ahd,
121                                         u_int scsi_id, char channel, int force);
122 #endif
123 static void             ahd_devlimited_syncrate(struct ahd_softc *ahd,
124                                                 struct ahd_initiator_tinfo *,
125                                                 u_int *period,
126                                                 u_int *ppr_options,
127                                                 role_t role);
128 static void             ahd_update_neg_table(struct ahd_softc *ahd,
129                                              struct ahd_devinfo *devinfo,
130                                              struct ahd_transinfo *tinfo);
131 static void             ahd_update_pending_scbs(struct ahd_softc *ahd);
132 static void             ahd_fetch_devinfo(struct ahd_softc *ahd,
133                                           struct ahd_devinfo *devinfo);
134 static void             ahd_scb_devinfo(struct ahd_softc *ahd,
135                                         struct ahd_devinfo *devinfo,
136                                         struct scb *scb);
137 static void             ahd_setup_initiator_msgout(struct ahd_softc *ahd,
138                                                    struct ahd_devinfo *devinfo,
139                                                    struct scb *scb);
140 static void             ahd_build_transfer_msg(struct ahd_softc *ahd,
141                                                struct ahd_devinfo *devinfo);
142 static void             ahd_construct_sdtr(struct ahd_softc *ahd,
143                                            struct ahd_devinfo *devinfo,
144                                            u_int period, u_int offset);
145 static void             ahd_construct_wdtr(struct ahd_softc *ahd,
146                                            struct ahd_devinfo *devinfo,
147                                            u_int bus_width);
148 static void             ahd_construct_ppr(struct ahd_softc *ahd,
149                                           struct ahd_devinfo *devinfo,
150                                           u_int period, u_int offset,
151                                           u_int bus_width, u_int ppr_options);
152 static void             ahd_clear_msg_state(struct ahd_softc *ahd);
153 static void             ahd_handle_message_phase(struct ahd_softc *ahd);
154 typedef enum {
155         AHDMSG_1B,
156         AHDMSG_2B,
157         AHDMSG_EXT
158 } ahd_msgtype;
159 static int              ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type,
160                                      u_int msgval, int full);
161 static int              ahd_parse_msg(struct ahd_softc *ahd,
162                                       struct ahd_devinfo *devinfo);
163 static int              ahd_handle_msg_reject(struct ahd_softc *ahd,
164                                               struct ahd_devinfo *devinfo);
165 static void             ahd_handle_ign_wide_residue(struct ahd_softc *ahd,
166                                                 struct ahd_devinfo *devinfo);
167 static void             ahd_reinitialize_dataptrs(struct ahd_softc *ahd);
168 static void             ahd_handle_devreset(struct ahd_softc *ahd,
169                                             struct ahd_devinfo *devinfo,
170                                             u_int lun, cam_status status,
171                                             char *message, int verbose_level);
172 #ifdef AHD_TARGET_MODE
173 static void             ahd_setup_target_msgin(struct ahd_softc *ahd,
174                                                struct ahd_devinfo *devinfo,
175                                                struct scb *scb);
176 #endif
177
178 static u_int            ahd_sglist_size(struct ahd_softc *ahd);
179 static u_int            ahd_sglist_allocsize(struct ahd_softc *ahd);
180 static bus_dmamap_callback_t
181                         ahd_dmamap_cb; 
182 static void             ahd_initialize_hscbs(struct ahd_softc *ahd);
183 static int              ahd_init_scbdata(struct ahd_softc *ahd);
184 static void             ahd_fini_scbdata(struct ahd_softc *ahd);
185 static void             ahd_setup_iocell_workaround(struct ahd_softc *ahd);
186 static void             ahd_iocell_first_selection(struct ahd_softc *ahd);
187 static void             ahd_add_col_list(struct ahd_softc *ahd,
188                                          struct scb *scb, u_int col_idx);
189 static void             ahd_rem_col_list(struct ahd_softc *ahd,
190                                          struct scb *scb);
191 static void             ahd_chip_init(struct ahd_softc *ahd);
192 static void             ahd_qinfifo_requeue(struct ahd_softc *ahd,
193                                             struct scb *prev_scb,
194                                             struct scb *scb);
195 static int              ahd_qinfifo_count(struct ahd_softc *ahd);
196 static int              ahd_search_scb_list(struct ahd_softc *ahd, int target,
197                                             char channel, int lun, u_int tag,
198                                             role_t role, uint32_t status,
199                                             ahd_search_action action,
200                                             u_int *list_head, u_int *list_tail,
201                                             u_int tid);
202 static void             ahd_stitch_tid_list(struct ahd_softc *ahd,
203                                             u_int tid_prev, u_int tid_cur,
204                                             u_int tid_next);
205 static void             ahd_add_scb_to_free_list(struct ahd_softc *ahd,
206                                                  u_int scbid);
207 static u_int            ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
208                                      u_int prev, u_int next, u_int tid);
209 static void             ahd_reset_current_bus(struct ahd_softc *ahd);
210 static ahd_callback_t   ahd_stat_timer;
211 #ifdef AHD_DUMP_SEQ
212 static void             ahd_dumpseq(struct ahd_softc *ahd);
213 #endif
214 static void             ahd_loadseq(struct ahd_softc *ahd);
215 static int              ahd_check_patch(struct ahd_softc *ahd,
216                                         struct patch **start_patch,
217                                         u_int start_instr, u_int *skip_addr);
218 static u_int            ahd_resolve_seqaddr(struct ahd_softc *ahd,
219                                             u_int address);
220 static void             ahd_download_instr(struct ahd_softc *ahd,
221                                            u_int instrptr, uint8_t *dconsts);
222 static int              ahd_probe_stack_size(struct ahd_softc *ahd);
223 static int              ahd_scb_active_in_fifo(struct ahd_softc *ahd,
224                                                struct scb *scb);
225 static void             ahd_run_data_fifo(struct ahd_softc *ahd,
226                                           struct scb *scb);
227
228 #ifdef AHD_TARGET_MODE
229 static void             ahd_queue_lstate_event(struct ahd_softc *ahd,
230                                                struct ahd_tmode_lstate *lstate,
231                                                u_int initiator_id,
232                                                u_int event_type,
233                                                u_int event_arg);
234 static void             ahd_update_scsiid(struct ahd_softc *ahd,
235                                           u_int targid_mask);
236 static int              ahd_handle_target_cmd(struct ahd_softc *ahd,
237                                               struct target_cmd *cmd);
238 #endif
239
240 /******************************** Private Inlines *****************************/
241 static __inline void    ahd_assert_atn(struct ahd_softc *ahd);
242 static __inline int     ahd_currently_packetized(struct ahd_softc *ahd);
243 static __inline int     ahd_set_active_fifo(struct ahd_softc *ahd);
244
245 static __inline void
246 ahd_assert_atn(struct ahd_softc *ahd)
247 {
248         ahd_outb(ahd, SCSISIGO, ATNO);
249 }
250
251 /*
252  * Determine if the current connection has a packetized
253  * agreement.  This does not necessarily mean that we
254  * are currently in a packetized transfer.  We could
255  * just as easily be sending or receiving a message.
256  */
257 static __inline int
258 ahd_currently_packetized(struct ahd_softc *ahd)
259 {
260         ahd_mode_state   saved_modes;
261         int              packetized;
262
263         saved_modes = ahd_save_modes(ahd);
264         if ((ahd->bugs & AHD_PKTIZED_STATUS_BUG) != 0) {
265                 /*
266                  * The packetized bit refers to the last
267                  * connection, not the current one.  Check
268                  * for non-zero LQISTATE instead.
269                  */
270                 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
271                 packetized = ahd_inb(ahd, LQISTATE) != 0;
272         } else {
273                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
274                 packetized = ahd_inb(ahd, LQISTAT2) & PACKETIZED;
275         }
276         ahd_restore_modes(ahd, saved_modes);
277         return (packetized);
278 }
279
280 static __inline int
281 ahd_set_active_fifo(struct ahd_softc *ahd)
282 {
283         u_int active_fifo;
284
285         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
286         active_fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
287         switch (active_fifo) {
288         case 0:
289         case 1:
290                 ahd_set_modes(ahd, active_fifo, active_fifo);
291                 return (1);
292         default:
293                 return (0);
294         }
295 }
296
297 /************************* Sequencer Execution Control ************************/
298 /*
299  * Restart the sequencer program from address zero
300  */
301 void
302 ahd_restart(struct ahd_softc *ahd)
303 {
304
305         ahd_pause(ahd);
306
307         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
308
309         /* No more pending messages */
310         ahd_clear_msg_state(ahd);
311         ahd_outb(ahd, SCSISIGO, 0);             /* De-assert BSY */
312         ahd_outb(ahd, MSG_OUT, MSG_NOOP);       /* No message to send */
313         ahd_outb(ahd, SXFRCTL1, ahd_inb(ahd, SXFRCTL1) & ~BITBUCKET);
314         ahd_outb(ahd, SEQINTCTL, 0);
315         ahd_outb(ahd, LASTPHASE, P_BUSFREE);
316         ahd_outb(ahd, SEQ_FLAGS, 0);
317         ahd_outb(ahd, SAVED_SCSIID, 0xFF);
318         ahd_outb(ahd, SAVED_LUN, 0xFF);
319
320         /*
321          * Ensure that the sequencer's idea of TQINPOS
322          * matches our own.  The sequencer increments TQINPOS
323          * only after it sees a DMA complete and a reset could
324          * occur before the increment leaving the kernel to believe
325          * the command arrived but the sequencer to not.
326          */
327         ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
328
329         /* Always allow reselection */
330         ahd_outb(ahd, SCSISEQ1,
331                  ahd_inb(ahd, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
332         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
333
334         /*
335          * Clear any pending sequencer interrupt.  It is no
336          * longer relevant since we're resetting the Program
337          * Counter.
338          */
339         ahd_outb(ahd, CLRINT, CLRSEQINT);
340
341         ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
342         ahd_unpause(ahd);
343 }
344
345 void
346 ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo)
347 {
348         ahd_mode_state   saved_modes;
349
350 #ifdef AHD_DEBUG
351         if ((ahd_debug & AHD_SHOW_FIFOS) != 0)
352                 printf("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo);
353 #endif
354         saved_modes = ahd_save_modes(ahd);
355         ahd_set_modes(ahd, fifo, fifo);
356         ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
357         if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
358                 ahd_outb(ahd, CCSGCTL, CCSGRESET);
359         ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
360         ahd_outb(ahd, SG_STATE, 0);
361         ahd_restore_modes(ahd, saved_modes);
362 }
363
364 /************************* Input/Output Queues ********************************/
365 /*
366  * Flush and completed commands that are sitting in the command
367  * complete queues down on the chip but have yet to be dma'ed back up.
368  */
369 void
370 ahd_flush_qoutfifo(struct ahd_softc *ahd)
371 {
372         struct          scb *scb;
373         ahd_mode_state  saved_modes;
374         u_int           saved_scbptr;
375         u_int           ccscbctl;
376         u_int           scbid;
377         u_int           next_scbid;
378
379         saved_modes = ahd_save_modes(ahd);
380
381         /*
382          * Flush the good status FIFO for completed packetized commands.
383          */
384         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
385         saved_scbptr = ahd_get_scbptr(ahd);
386         while ((ahd_inb(ahd, LQISTAT2) & LQIGSAVAIL) != 0) {
387                 u_int fifo_mode;
388                 u_int i;
389                 
390                 scbid = ahd_inw(ahd, GSFIFO);
391                 scb = ahd_lookup_scb(ahd, scbid);
392                 if (scb == NULL) {
393                         printf("%s: Warning - GSFIFO SCB %d invalid\n",
394                                ahd_name(ahd), scbid);
395                         continue;
396                 }
397                 /*
398                  * Determine if this transaction is still active in
399                  * any FIFO.  If it is, we must flush that FIFO to
400                  * the host before completing the  command.
401                  */
402                 fifo_mode = 0;
403 rescan_fifos:
404                 for (i = 0; i < 2; i++) {
405                         /* Toggle to the other mode. */
406                         fifo_mode ^= 1;
407                         ahd_set_modes(ahd, fifo_mode, fifo_mode);
408
409                         if (ahd_scb_active_in_fifo(ahd, scb) == 0)
410                                 continue;
411
412                         ahd_run_data_fifo(ahd, scb);
413
414                         /*
415                          * Running this FIFO may cause a CFG4DATA for
416                          * this same transaction to assert in the other
417                          * FIFO or a new snapshot SAVEPTRS interrupt
418                          * in this FIFO.  Even running a FIFO may not
419                          * clear the transaction if we are still waiting
420                          * for data to drain to the host. We must loop
421                          * until the transaction is not active in either
422                          * FIFO just to be sure.  Reset our loop counter
423                          * so we will visit both FIFOs again before
424                          * declaring this transaction finished.  We
425                          * also delay a bit so that status has a chance
426                          * to change before we look at this FIFO again.
427                          */
428                         ahd_delay(200);
429                         goto rescan_fifos;
430                 }
431                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
432                 ahd_set_scbptr(ahd, scbid);
433                 if ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_LIST_NULL) == 0
434                  && ((ahd_inb_scbram(ahd, SCB_SGPTR) & SG_FULL_RESID) != 0
435                   || (ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR)
436                       & SG_LIST_NULL) != 0)) {
437                         u_int comp_head;
438
439                         /*
440                          * The transfer completed with a residual.
441                          * Place this SCB on the complete DMA list
442                          * so that we update our in-core copy of the
443                          * SCB before completing the command.
444                          */
445                         ahd_outb(ahd, SCB_SCSI_STATUS, 0);
446                         ahd_outb(ahd, SCB_SGPTR,
447                                  ahd_inb_scbram(ahd, SCB_SGPTR)
448                                  | SG_STATUS_VALID);
449                         ahd_outw(ahd, SCB_TAG, scbid);
450                         ahd_outw(ahd, SCB_NEXT_COMPLETE, SCB_LIST_NULL);
451                         comp_head = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
452                         if (SCBID_IS_NULL(comp_head)) {
453                                 ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, scbid);
454                                 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
455                         } else {
456                                 u_int tail;
457
458                                 tail = ahd_inw(ahd, COMPLETE_DMA_SCB_TAIL);
459                                 ahd_set_scbptr(ahd, tail);
460                                 ahd_outw(ahd, SCB_NEXT_COMPLETE, scbid);
461                                 ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, scbid);
462                                 ahd_set_scbptr(ahd, scbid);
463                         }
464                 } else
465                         ahd_complete_scb(ahd, scb);
466         }
467         ahd_set_scbptr(ahd, saved_scbptr);
468
469         /*
470          * Setup for command channel portion of flush.
471          */
472         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
473
474         /*
475          * Wait for any inprogress DMA to complete and clear DMA state
476          * if this if for an SCB in the qinfifo.
477          */
478         while (((ccscbctl = ahd_inb(ahd, CCSCBCTL)) & (CCARREN|CCSCBEN)) != 0) {
479
480                 if ((ccscbctl & (CCSCBDIR|CCARREN)) == (CCSCBDIR|CCARREN)) {
481                         if ((ccscbctl & ARRDONE) != 0)
482                                 break;
483                 } else if ((ccscbctl & CCSCBDONE) != 0)
484                         break;
485                 ahd_delay(200);
486         }
487         /*
488          * We leave the sequencer to cleanup in the case of DMA's to
489          * update the qoutfifo.  In all other cases (DMA's to the
490          * chip or a push of an SCB from the COMPLETE_DMA_SCB list),
491          * we disable the DMA engine so that the sequencer will not
492          * attempt to handle the DMA completion.
493          */
494         if ((ccscbctl & CCSCBDIR) != 0 || (ccscbctl & ARRDONE) != 0)
495                 ahd_outb(ahd, CCSCBCTL, ccscbctl & ~(CCARREN|CCSCBEN));
496
497         /*
498          * Complete any SCBs that just finished
499          * being DMA'ed into the qoutfifo.
500          */
501         ahd_run_qoutfifo(ahd);
502
503         saved_scbptr = ahd_get_scbptr(ahd);
504         /*
505          * Manually update/complete any completed SCBs that are waiting to be
506          * DMA'ed back up to the host.
507          */
508         scbid = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
509         while (!SCBID_IS_NULL(scbid)) {
510                 uint8_t *hscb_ptr;
511                 u_int    i;
512                 
513                 ahd_set_scbptr(ahd, scbid);
514                 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
515                 scb = ahd_lookup_scb(ahd, scbid);
516                 if (scb == NULL) {
517                         printf("%s: Warning - DMA-up and complete "
518                                "SCB %d invalid\n", ahd_name(ahd), scbid);
519                         continue;
520                 }
521                 hscb_ptr = (uint8_t *)scb->hscb;
522                 for (i = 0; i < sizeof(struct hardware_scb); i++)
523                         *hscb_ptr++ = ahd_inb_scbram(ahd, SCB_BASE + i);
524
525                 ahd_complete_scb(ahd, scb);
526                 scbid = next_scbid;
527         }
528         ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
529         ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);
530
531         scbid = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
532         while (!SCBID_IS_NULL(scbid)) {
533
534                 ahd_set_scbptr(ahd, scbid);
535                 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
536                 scb = ahd_lookup_scb(ahd, scbid);
537                 if (scb == NULL) {
538                         printf("%s: Warning - Complete Qfrz SCB %d invalid\n",
539                                ahd_name(ahd), scbid);
540                         continue;
541                 }
542
543                 ahd_complete_scb(ahd, scb);
544                 scbid = next_scbid;
545         }
546         ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);
547
548         scbid = ahd_inw(ahd, COMPLETE_SCB_HEAD);
549         while (!SCBID_IS_NULL(scbid)) {
550
551                 ahd_set_scbptr(ahd, scbid);
552                 next_scbid = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
553                 scb = ahd_lookup_scb(ahd, scbid);
554                 if (scb == NULL) {
555                         printf("%s: Warning - Complete SCB %d invalid\n",
556                                ahd_name(ahd), scbid);
557                         continue;
558                 }
559
560                 ahd_complete_scb(ahd, scb);
561                 scbid = next_scbid;
562         }
563         ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
564
565         /*
566          * Restore state.
567          */
568         ahd_set_scbptr(ahd, saved_scbptr);
569         ahd_restore_modes(ahd, saved_modes);
570         ahd->flags |= AHD_UPDATE_PEND_CMDS;
571 }
572
573 /*
574  * Determine if an SCB for a packetized transaction
575  * is active in a FIFO.
576  */
577 static int
578 ahd_scb_active_in_fifo(struct ahd_softc *ahd, struct scb *scb)
579 {
580
581         /*
582          * The FIFO is only active for our transaction if
583          * the SCBPTR matches the SCB's ID and the firmware
584          * has installed a handler for the FIFO or we have
585          * a pending SAVEPTRS or CFG4DATA interrupt.
586          */
587         if (ahd_get_scbptr(ahd) != SCB_GET_TAG(scb)
588          || ((ahd_inb(ahd, LONGJMP_ADDR+1) & INVALID_ADDR) != 0
589           && (ahd_inb(ahd, SEQINTSRC) & (CFG4DATA|SAVEPTRS)) == 0))
590                 return (0);
591
592         return (1);
593 }
594
595 /*
596  * Run a data fifo to completion for a transaction we know
597  * has completed across the SCSI bus (good status has been
598  * received).  We are already set to the correct FIFO mode
599  * on entry to this routine.
600  *
601  * This function attempts to operate exactly as the firmware
602  * would when running this FIFO.  Care must be taken to update
603  * this routine any time the firmware's FIFO algorithm is
604  * changed.
605  */
606 static void
607 ahd_run_data_fifo(struct ahd_softc *ahd, struct scb *scb)
608 {
609         u_int seqintsrc;
610
611         seqintsrc = ahd_inb(ahd, SEQINTSRC);
612         if ((seqintsrc & CFG4DATA) != 0) {
613                 uint32_t datacnt;
614                 uint32_t sgptr;
615
616                 /*
617                  * Clear full residual flag.
618                  */
619                 sgptr = ahd_inl_scbram(ahd, SCB_SGPTR) & ~SG_FULL_RESID;
620                 ahd_outb(ahd, SCB_SGPTR, sgptr);
621
622                 /*
623                  * Load datacnt and address.
624                  */
625                 datacnt = ahd_inl_scbram(ahd, SCB_DATACNT);
626                 if ((datacnt & AHD_DMA_LAST_SEG) != 0) {
627                         sgptr |= LAST_SEG;
628                         ahd_outb(ahd, SG_STATE, 0);
629                 } else
630                         ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
631                 ahd_outq(ahd, HADDR, ahd_inq_scbram(ahd, SCB_DATAPTR));
632                 ahd_outl(ahd, HCNT, datacnt & AHD_SG_LEN_MASK);
633                 ahd_outb(ahd, SG_CACHE_PRE, sgptr);
634                 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
635
636                 /*
637                  * Initialize Residual Fields.
638                  */
639                 ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, datacnt >> 24);
640                 ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr & SG_PTR_MASK);
641
642                 /*
643                  * Mark the SCB as having a FIFO in use.
644                  */
645                 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
646                          ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) + 1);
647
648                 /*
649                  * Install a "fake" handler for this FIFO.
650                  */
651                 ahd_outw(ahd, LONGJMP_ADDR, 0);
652
653                 /*
654                  * Notify the hardware that we have satisfied
655                  * this sequencer interrupt.
656                  */
657                 ahd_outb(ahd, CLRSEQINTSRC, CLRCFG4DATA);
658         } else if ((seqintsrc & SAVEPTRS) != 0) {
659                 uint32_t sgptr;
660                 uint32_t resid;
661
662                 if ((ahd_inb(ahd, LONGJMP_ADDR+1)&INVALID_ADDR) != 0) {
663                         /*
664                          * Snapshot Save Pointers.  All that
665                          * is necessary to clear the snapshot
666                          * is a CLRCHN.
667                          */
668                         goto clrchn;
669                 }
670
671                 /*
672                  * Disable S/G fetch so the DMA engine
673                  * is available to future users.
674                  */
675                 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0)
676                         ahd_outb(ahd, CCSGCTL, 0);
677                 ahd_outb(ahd, SG_STATE, 0);
678
679                 /*
680                  * Flush the data FIFO.  Strickly only
681                  * necessary for Rev A parts.
682                  */
683                 ahd_outb(ahd, DFCNTRL, ahd_inb(ahd, DFCNTRL) | FIFOFLUSH);
684
685                 /*
686                  * Calculate residual.
687                  */
688                 sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
689                 resid = ahd_inl(ahd, SHCNT);
690                 resid |= ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT+3) << 24;
691                 ahd_outl(ahd, SCB_RESIDUAL_DATACNT, resid);
692                 if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG) == 0) {
693                         /*
694                          * Must back up to the correct S/G element.
695                          * Typically this just means resetting our
696                          * low byte to the offset in the SG_CACHE,
697                          * but if we wrapped, we have to correct
698                          * the other bytes of the sgptr too.
699                          */
700                         if ((ahd_inb(ahd, SG_CACHE_SHADOW) & 0x80) != 0
701                          && (sgptr & 0x80) == 0)
702                                 sgptr -= 0x100;
703                         sgptr &= ~0xFF;
704                         sgptr |= ahd_inb(ahd, SG_CACHE_SHADOW)
705                                & SG_ADDR_MASK;
706                         ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
707                         ahd_outb(ahd, SCB_RESIDUAL_DATACNT + 3, 0);
708                 } else if ((resid & AHD_SG_LEN_MASK) == 0) {
709                         ahd_outb(ahd, SCB_RESIDUAL_SGPTR,
710                                  sgptr | SG_LIST_NULL);
711                 }
712                 /*
713                  * Save Pointers.
714                  */
715                 ahd_outq(ahd, SCB_DATAPTR, ahd_inq(ahd, SHADDR));
716                 ahd_outl(ahd, SCB_DATACNT, resid);
717                 ahd_outl(ahd, SCB_SGPTR, sgptr);
718                 ahd_outb(ahd, CLRSEQINTSRC, CLRSAVEPTRS);
719                 ahd_outb(ahd, SEQIMODE,
720                          ahd_inb(ahd, SEQIMODE) | ENSAVEPTRS);
721                 /*
722                  * If the data is to the SCSI bus, we are
723                  * done, otherwise wait for FIFOEMP.
724                  */
725                 if ((ahd_inb(ahd, DFCNTRL) & DIRECTION) != 0)
726                         goto clrchn;
727         } else if ((ahd_inb(ahd, SG_STATE) & LOADING_NEEDED) != 0) {
728                 uint32_t sgptr;
729                 uint64_t data_addr;
730                 uint32_t data_len;
731                 u_int    dfcntrl;
732
733                 /*
734                  * Disable S/G fetch so the DMA engine
735                  * is available to future users.  We won't
736                  * be using the DMA engine to load segments.
737                  */
738                 if ((ahd_inb(ahd, SG_STATE) & FETCH_INPROG) != 0) {
739                         ahd_outb(ahd, CCSGCTL, 0);
740                         ahd_outb(ahd, SG_STATE, LOADING_NEEDED);
741                 }
742
743                 /*
744                  * Wait for the DMA engine to notice that the
745                  * host transfer is enabled and that there is
746                  * space in the S/G FIFO for new segments before
747                  * loading more segments.
748                  */
749                 if ((ahd_inb(ahd, DFSTATUS) & PRELOAD_AVAIL) != 0
750                  && (ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0) {
751
752                         /*
753                          * Determine the offset of the next S/G
754                          * element to load.
755                          */
756                         sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
757                         sgptr &= SG_PTR_MASK;
758                         if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
759                                 struct ahd_dma64_seg *sg;
760
761                                 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
762                                 data_addr = sg->addr;
763                                 data_len = sg->len;
764                                 sgptr += sizeof(*sg);
765                         } else {
766                                 struct  ahd_dma_seg *sg;
767
768                                 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
769                                 data_addr = sg->len & AHD_SG_HIGH_ADDR_MASK;
770                                 data_addr <<= 8;
771                                 data_addr |= sg->addr;
772                                 data_len = sg->len;
773                                 sgptr += sizeof(*sg);
774                         }
775
776                         /*
777                          * Update residual information.
778                          */
779                         ahd_outb(ahd, SCB_RESIDUAL_DATACNT+3, data_len >> 24);
780                         ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
781
782                         /*
783                          * Load the S/G.
784                          */
785                         if (data_len & AHD_DMA_LAST_SEG) {
786                                 sgptr |= LAST_SEG;
787                                 ahd_outb(ahd, SG_STATE, 0);
788                         }
789                         ahd_outq(ahd, HADDR, data_addr);
790                         ahd_outl(ahd, HCNT, data_len & AHD_SG_LEN_MASK);
791                         ahd_outb(ahd, SG_CACHE_PRE, sgptr & 0xFF);
792
793                         /*
794                          * Advertise the segment to the hardware.
795                          */
796                         dfcntrl = ahd_inb(ahd, DFCNTRL)|PRELOADEN|HDMAEN;
797                         if ((ahd->features & AHD_NEW_DFCNTRL_OPTS) != 0) {
798                                 /*
799                                  * Use SCSIENWRDIS so that SCSIEN
800                                  * is never modified by this
801                                  * operation.
802                                  */
803                                 dfcntrl |= SCSIENWRDIS;
804                         }
805                         ahd_outb(ahd, DFCNTRL, dfcntrl);
806                 }
807         } else if ((ahd_inb(ahd, SG_CACHE_SHADOW) & LAST_SEG_DONE) != 0) {
808
809                 /*
810                  * Transfer completed to the end of SG list
811                  * and has flushed to the host.
812                  */
813                 ahd_outb(ahd, SCB_SGPTR,
814                          ahd_inb_scbram(ahd, SCB_SGPTR) | SG_LIST_NULL);
815                 goto clrchn;
816         } else if ((ahd_inb(ahd, DFSTATUS) & FIFOEMP) != 0) {
817 clrchn:
818                 /*
819                  * Clear any handler for this FIFO, decrement
820                  * the FIFO use count for the SCB, and release
821                  * the FIFO.
822                  */
823                 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
824                 ahd_outb(ahd, SCB_FIFO_USE_COUNT,
825                          ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT) - 1);
826                 ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
827         }
828 }
829
830 /*
831  * Look for entries in the QoutFIFO that have completed.
832  * The valid_tag completion field indicates the validity
833  * of the entry - the valid value toggles each time through
834  * the queue. We use the sg_status field in the completion
835  * entry to avoid referencing the hscb if the completion
836  * occurred with no errors and no residual.  sg_status is
837  * a copy of the first byte (little endian) of the sgptr
838  * hscb field.
839  */
840 void
841 ahd_run_qoutfifo(struct ahd_softc *ahd)
842 {
843         struct ahd_completion *completion;
844         struct scb *scb;
845         u_int  scb_index;
846
847         if ((ahd->flags & AHD_RUNNING_QOUTFIFO) != 0)
848                 panic("ahd_run_qoutfifo recursion");
849         ahd->flags |= AHD_RUNNING_QOUTFIFO;
850         ahd_sync_qoutfifo(ahd, BUS_DMASYNC_POSTREAD);
851         for (;;) {
852                 completion = &ahd->qoutfifo[ahd->qoutfifonext];
853
854                 if (completion->valid_tag != ahd->qoutfifonext_valid_tag)
855                         break;
856
857                 scb_index = ahd_le16toh(completion->tag);
858                 scb = ahd_lookup_scb(ahd, scb_index);
859                 if (scb == NULL) {
860                         printf("%s: WARNING no command for scb %d "
861                                "(cmdcmplt)\nQOUTPOS = %d\n",
862                                ahd_name(ahd), scb_index,
863                                ahd->qoutfifonext);
864                         ahd_dump_card_state(ahd);
865                 } else if ((completion->sg_status & SG_STATUS_VALID) != 0) {
866                         ahd_handle_scb_status(ahd, scb);
867                 } else {
868                         ahd_done(ahd, scb);
869                 }
870
871                 ahd->qoutfifonext = (ahd->qoutfifonext+1) & (AHD_QOUT_SIZE-1);
872                 if (ahd->qoutfifonext == 0)
873                         ahd->qoutfifonext_valid_tag ^= QOUTFIFO_ENTRY_VALID;
874         }
875         ahd->flags &= ~AHD_RUNNING_QOUTFIFO;
876 }
877
878 /************************* Interrupt Handling *********************************/
879 void
880 ahd_handle_hwerrint(struct ahd_softc *ahd)
881 {
882         /*
883          * Some catastrophic hardware error has occurred.
884          * Print it for the user and disable the controller.
885          */
886         int i;
887         int error;
888
889         error = ahd_inb(ahd, ERROR);
890         for (i = 0; i < num_errors; i++) {
891                 if ((error & ahd_hard_errors[i].errno) != 0)
892                         printf("%s: hwerrint, %s\n",
893                                ahd_name(ahd), ahd_hard_errors[i].errmesg);
894         }
895
896         ahd_dump_card_state(ahd);
897         panic("BRKADRINT");
898
899         /* Tell everyone that this HBA is no longer available */
900         ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
901                        CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
902                        CAM_NO_HBA);
903
904         /* Tell the system that this controller has gone away. */
905         ahd_free(ahd);
906 }
907
908 void
909 ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
910 {
911         u_int seqintcode;
912
913         /*
914          * Save the sequencer interrupt code and clear the SEQINT
915          * bit. We will unpause the sequencer, if appropriate,
916          * after servicing the request.
917          */
918         seqintcode = ahd_inb(ahd, SEQINTCODE);
919         ahd_outb(ahd, CLRINT, CLRSEQINT);
920         if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
921                 /*
922                  * Unpause the sequencer and let it clear
923                  * SEQINT by writing NO_SEQINT to it.  This
924                  * will cause the sequencer to be paused again,
925                  * which is the expected state of this routine.
926                  */
927                 ahd_unpause(ahd);
928                 while (!ahd_is_paused(ahd))
929                         ;
930                 ahd_outb(ahd, CLRINT, CLRSEQINT);
931         }
932         ahd_update_modes(ahd);
933 #ifdef AHD_DEBUG
934         if ((ahd_debug & AHD_SHOW_MISC) != 0)
935                 printf("%s: Handle Seqint Called for code %d\n",
936                        ahd_name(ahd), seqintcode);
937 #endif
938         switch (seqintcode) {
939         case ENTERING_NONPACK:
940         {
941                 struct  scb *scb;
942                 u_int   scbid;
943
944                 AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
945                                  ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
946                 scbid = ahd_get_scbptr(ahd);
947                 scb = ahd_lookup_scb(ahd, scbid);
948                 if (scb == NULL) {
949                         /*
950                          * Somehow need to know if this
951                          * is from a selection or reselection.
952                          * From that, we can determine target
953                          * ID so we at least have an I_T nexus.
954                          */
955                 } else {
956                         ahd_outb(ahd, SAVED_SCSIID, scb->hscb->scsiid);
957                         ahd_outb(ahd, SAVED_LUN, scb->hscb->lun);
958                         ahd_outb(ahd, SEQ_FLAGS, 0x0);
959                 }
960                 if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0
961                  && (ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
962                         /*
963                          * Phase change after read stream with
964                          * CRC error with P0 asserted on last
965                          * packet.
966                          */
967 #ifdef AHD_DEBUG
968                         if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
969                                 printf("%s: Assuming LQIPHASE_NLQ with "
970                                        "P0 assertion\n", ahd_name(ahd));
971 #endif
972                 }
973 #ifdef AHD_DEBUG
974                 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
975                         printf("%s: Entering NONPACK\n", ahd_name(ahd));
976 #endif
977                 break;
978         }
979         case INVALID_SEQINT:
980                 printf("%s: Invalid Sequencer interrupt occurred, "
981                        "resetting channel.\n",
982                        ahd_name(ahd));
983 #ifdef AHD_DEBUG
984                 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
985                         ahd_dump_card_state(ahd);
986 #endif
987                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
988                 break;
989         case STATUS_OVERRUN:
990         {
991                 struct  scb *scb;
992                 u_int   scbid;
993
994                 scbid = ahd_get_scbptr(ahd);
995                 scb = ahd_lookup_scb(ahd, scbid);
996                 if (scb != NULL)
997                         ahd_print_path(ahd, scb);
998                 else
999                         printf("%s: ", ahd_name(ahd));
1000                 printf("SCB %d Packetized Status Overrun", scbid);
1001                 ahd_dump_card_state(ahd);
1002                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1003                 break;
1004         }
1005         case CFG4ISTAT_INTR:
1006         {
1007                 struct  scb *scb;
1008                 u_int   scbid;
1009
1010                 scbid = ahd_get_scbptr(ahd);
1011                 scb = ahd_lookup_scb(ahd, scbid);
1012                 if (scb == NULL) {
1013                         ahd_dump_card_state(ahd);
1014                         printf("CFG4ISTAT: Free SCB %d referenced", scbid);
1015                         panic("For safety");
1016                 }
1017                 ahd_outq(ahd, HADDR, scb->sense_busaddr);
1018                 ahd_outw(ahd, HCNT, AHD_SENSE_BUFSIZE);
1019                 ahd_outb(ahd, HCNT + 2, 0);
1020                 ahd_outb(ahd, SG_CACHE_PRE, SG_LAST_SEG);
1021                 ahd_outb(ahd, DFCNTRL, PRELOADEN|SCSIEN|HDMAEN);
1022                 break;
1023         }
1024         case ILLEGAL_PHASE:
1025         {
1026                 u_int bus_phase;
1027
1028                 bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1029                 printf("%s: ILLEGAL_PHASE 0x%x\n",
1030                        ahd_name(ahd), bus_phase);
1031
1032                 switch (bus_phase) {
1033                 case P_DATAOUT:
1034                 case P_DATAIN:
1035                 case P_DATAOUT_DT:
1036                 case P_DATAIN_DT:
1037                 case P_MESGOUT:
1038                 case P_STATUS:
1039                 case P_MESGIN:
1040                         ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1041                         printf("%s: Issued Bus Reset.\n", ahd_name(ahd));
1042                         break;
1043                 case P_COMMAND:
1044                 {
1045                         struct  ahd_devinfo devinfo;
1046                         struct  scb *scb;
1047                         struct  ahd_initiator_tinfo *targ_info;
1048                         struct  ahd_tmode_tstate *tstate;
1049                         struct  ahd_transinfo *tinfo;
1050                         u_int   scbid;
1051
1052                         /*
1053                          * If a target takes us into the command phase
1054                          * assume that it has been externally reset and
1055                          * has thus lost our previous packetized negotiation
1056                          * agreement.
1057                          * Revert to async/narrow transfers until we
1058                          * can renegotiate with the device and notify
1059                          * the OSM about the reset.
1060                          */
1061                         scbid = ahd_get_scbptr(ahd);
1062                         scb = ahd_lookup_scb(ahd, scbid);
1063                         if (scb == NULL) {
1064                                 printf("Invalid phase with no valid SCB.  "
1065                                        "Resetting bus.\n");
1066                                 ahd_reset_channel(ahd, 'A',
1067                                                   /*Initiate Reset*/TRUE);
1068                                 break;
1069                         }
1070                         ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
1071                                             SCB_GET_TARGET(ahd, scb),
1072                                             SCB_GET_LUN(scb),
1073                                             SCB_GET_CHANNEL(ahd, scb),
1074                                             ROLE_INITIATOR);
1075                         targ_info = ahd_fetch_transinfo(ahd,
1076                                                         devinfo.channel,
1077                                                         devinfo.our_scsiid,
1078                                                         devinfo.target,
1079                                                         &tstate);
1080                         tinfo = &targ_info->curr;
1081                         ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
1082                                       AHD_TRANS_ACTIVE, /*paused*/TRUE);
1083                         ahd_set_syncrate(ahd, &devinfo, /*period*/0,
1084                                          /*offset*/0, /*ppr_options*/0,
1085                                          AHD_TRANS_ACTIVE, /*paused*/TRUE);
1086                         scb->flags |= SCB_EXTERNAL_RESET;
1087                         ahd_freeze_devq(ahd, scb);
1088                         ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1089                         ahd_freeze_scb(scb);
1090
1091                         /* Notify XPT */
1092                         ahd_send_async(ahd, devinfo.channel, devinfo.target,
1093                                        CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
1094
1095                         /*
1096                          * Allow the sequencer to continue with
1097                          * non-pack processing.
1098                          */
1099                         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1100                         ahd_outb(ahd, CLRLQOINT1, CLRLQOPHACHGINPKT);
1101                         if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
1102                                 ahd_outb(ahd, CLRLQOINT1, 0);
1103                         }
1104 #ifdef AHD_DEBUG
1105                         if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1106                                 ahd_print_path(ahd, scb);
1107                                 printf("Unexpected command phase from "
1108                                        "packetized target\n");
1109                         }
1110 #endif
1111                         break;
1112                 }
1113                 }
1114                 break;
1115         }
1116         case CFG4OVERRUN:
1117         {
1118                 struct  scb *scb;
1119                 u_int   scb_index;
1120                 
1121 #ifdef AHD_DEBUG
1122                 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1123                         printf("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd),
1124                                ahd_inb(ahd, MODE_PTR));
1125                 }
1126 #endif
1127                 scb_index = ahd_get_scbptr(ahd);
1128                 scb = ahd_lookup_scb(ahd, scb_index);
1129                 if (scb == NULL) {
1130                         /*
1131                          * Attempt to transfer to an SCB that is
1132                          * not outstanding.
1133                          */
1134                         ahd_assert_atn(ahd);
1135                         ahd_outb(ahd, MSG_OUT, HOST_MSG);
1136                         ahd->msgout_buf[0] = MSG_ABORT_TASK;
1137                         ahd->msgout_len = 1;
1138                         ahd->msgout_index = 0;
1139                         ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1140                         /*
1141                          * Clear status received flag to prevent any
1142                          * attempt to complete this bogus SCB.
1143                          */
1144                         ahd_outb(ahd, SCB_CONTROL,
1145                                  ahd_inb_scbram(ahd, SCB_CONTROL)
1146                                  & ~STATUS_RCVD);
1147                 }
1148                 break;
1149         }
1150         case DUMP_CARD_STATE:
1151         {
1152                 ahd_dump_card_state(ahd);
1153                 break;
1154         }
1155         case PDATA_REINIT:
1156         {
1157 #ifdef AHD_DEBUG
1158                 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1159                         printf("%s: PDATA_REINIT - DFCNTRL = 0x%x "
1160                                "SG_CACHE_SHADOW = 0x%x\n",
1161                                ahd_name(ahd), ahd_inb(ahd, DFCNTRL),
1162                                ahd_inb(ahd, SG_CACHE_SHADOW));
1163                 }
1164 #endif
1165                 ahd_reinitialize_dataptrs(ahd);
1166                 break;
1167         }
1168         case HOST_MSG_LOOP:
1169         {
1170                 struct ahd_devinfo devinfo;
1171
1172                 /*
1173                  * The sequencer has encountered a message phase
1174                  * that requires host assistance for completion.
1175                  * While handling the message phase(s), we will be
1176                  * notified by the sequencer after each byte is
1177                  * transfered so we can track bus phase changes.
1178                  *
1179                  * If this is the first time we've seen a HOST_MSG_LOOP
1180                  * interrupt, initialize the state of the host message
1181                  * loop.
1182                  */
1183                 ahd_fetch_devinfo(ahd, &devinfo);
1184                 if (ahd->msg_type == MSG_TYPE_NONE) {
1185                         struct scb *scb;
1186                         u_int scb_index;
1187                         u_int bus_phase;
1188
1189                         bus_phase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1190                         if (bus_phase != P_MESGIN
1191                          && bus_phase != P_MESGOUT) {
1192                                 printf("ahd_intr: HOST_MSG_LOOP bad "
1193                                        "phase 0x%x\n", bus_phase);
1194                                 /*
1195                                  * Probably transitioned to bus free before
1196                                  * we got here.  Just punt the message.
1197                                  */
1198                                 ahd_dump_card_state(ahd);
1199                                 ahd_clear_intstat(ahd);
1200                                 ahd_restart(ahd);
1201                                 return;
1202                         }
1203
1204                         scb_index = ahd_get_scbptr(ahd);
1205                         scb = ahd_lookup_scb(ahd, scb_index);
1206                         if (devinfo.role == ROLE_INITIATOR) {
1207                                 if (bus_phase == P_MESGOUT)
1208                                         ahd_setup_initiator_msgout(ahd,
1209                                                                    &devinfo,
1210                                                                    scb);
1211                                 else {
1212                                         ahd->msg_type =
1213                                             MSG_TYPE_INITIATOR_MSGIN;
1214                                         ahd->msgin_index = 0;
1215                                 }
1216                         }
1217 #ifdef AHD_TARGET_MODE
1218                         else {
1219                                 if (bus_phase == P_MESGOUT) {
1220                                         ahd->msg_type =
1221                                             MSG_TYPE_TARGET_MSGOUT;
1222                                         ahd->msgin_index = 0;
1223                                 }
1224                                 else 
1225                                         ahd_setup_target_msgin(ahd,
1226                                                                &devinfo,
1227                                                                scb);
1228                         }
1229 #endif
1230                 }
1231
1232                 ahd_handle_message_phase(ahd);
1233                 break;
1234         }
1235         case NO_MATCH:
1236         {
1237                 /* Ensure we don't leave the selection hardware on */
1238                 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
1239                 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
1240
1241                 printf("%s:%c:%d: no active SCB for reconnecting "
1242                        "target - issuing BUS DEVICE RESET\n",
1243                        ahd_name(ahd), 'A', ahd_inb(ahd, SELID) >> 4);
1244                 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
1245                        "REG0 == 0x%x ACCUM = 0x%x\n",
1246                        ahd_inb(ahd, SAVED_SCSIID), ahd_inb(ahd, SAVED_LUN),
1247                        ahd_inw(ahd, REG0), ahd_inb(ahd, ACCUM));
1248                 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
1249                        "SINDEX == 0x%x\n",
1250                        ahd_inb(ahd, SEQ_FLAGS), ahd_get_scbptr(ahd),
1251                        ahd_find_busy_tcl(ahd,
1252                                          BUILD_TCL(ahd_inb(ahd, SAVED_SCSIID),
1253                                                    ahd_inb(ahd, SAVED_LUN))),
1254                        ahd_inw(ahd, SINDEX));
1255                 printf("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
1256                        "SCB_CONTROL == 0x%x\n",
1257                        ahd_inb(ahd, SELID), ahd_inb_scbram(ahd, SCB_SCSIID),
1258                        ahd_inb_scbram(ahd, SCB_LUN),
1259                        ahd_inb_scbram(ahd, SCB_CONTROL));
1260                 printf("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n",
1261                        ahd_inb(ahd, SCSIBUS), ahd_inb(ahd, SCSISIGI));
1262                 printf("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0));
1263                 printf("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0));
1264                 ahd_dump_card_state(ahd);
1265                 ahd->msgout_buf[0] = MSG_BUS_DEV_RESET;
1266                 ahd->msgout_len = 1;
1267                 ahd->msgout_index = 0;
1268                 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
1269                 ahd_outb(ahd, MSG_OUT, HOST_MSG);
1270                 ahd_assert_atn(ahd);
1271                 break;
1272         }
1273         case PROTO_VIOLATION:
1274         {
1275                 ahd_handle_proto_violation(ahd);
1276                 break;
1277         }
1278         case IGN_WIDE_RES:
1279         {
1280                 struct ahd_devinfo devinfo;
1281
1282                 ahd_fetch_devinfo(ahd, &devinfo);
1283                 ahd_handle_ign_wide_residue(ahd, &devinfo);
1284                 break;
1285         }
1286         case BAD_PHASE:
1287         {
1288                 u_int lastphase;
1289
1290                 lastphase = ahd_inb(ahd, LASTPHASE);
1291                 printf("%s:%c:%d: unknown scsi bus phase %x, "
1292                        "lastphase = 0x%x.  Attempting to continue\n",
1293                        ahd_name(ahd), 'A',
1294                        SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
1295                        lastphase, ahd_inb(ahd, SCSISIGI));
1296                 break;
1297         }
1298         case MISSED_BUSFREE:
1299         {
1300                 u_int lastphase;
1301
1302                 lastphase = ahd_inb(ahd, LASTPHASE);
1303                 printf("%s:%c:%d: Missed busfree. "
1304                        "Lastphase = 0x%x, Curphase = 0x%x\n",
1305                        ahd_name(ahd), 'A',
1306                        SCSIID_TARGET(ahd, ahd_inb(ahd, SAVED_SCSIID)),
1307                        lastphase, ahd_inb(ahd, SCSISIGI));
1308                 ahd_restart(ahd);
1309                 return;
1310         }
1311         case DATA_OVERRUN:
1312         {
1313                 /*
1314                  * When the sequencer detects an overrun, it
1315                  * places the controller in "BITBUCKET" mode
1316                  * and allows the target to complete its transfer.
1317                  * Unfortunately, none of the counters get updated
1318                  * when the controller is in this mode, so we have
1319                  * no way of knowing how large the overrun was.
1320                  */
1321                 struct  scb *scb;
1322                 u_int   scbindex;
1323 #ifdef AHD_DEBUG
1324                 u_int   lastphase;
1325 #endif
1326
1327                 scbindex = ahd_get_scbptr(ahd);
1328                 scb = ahd_lookup_scb(ahd, scbindex);
1329 #ifdef AHD_DEBUG
1330                 lastphase = ahd_inb(ahd, LASTPHASE);
1331                 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1332                         ahd_print_path(ahd, scb);
1333                         printf("data overrun detected %s.  Tag == 0x%x.\n",
1334                                ahd_lookup_phase_entry(lastphase)->phasemsg,
1335                                SCB_GET_TAG(scb));
1336                         ahd_print_path(ahd, scb);
1337                         printf("%s seen Data Phase.  Length = %ld.  "
1338                                "NumSGs = %d.\n",
1339                                ahd_inb(ahd, SEQ_FLAGS) & DPHASE
1340                                ? "Have" : "Haven't",
1341                                ahd_get_transfer_length(scb), scb->sg_count);
1342                         ahd_dump_sglist(scb);
1343                 }
1344 #endif
1345
1346                 /*
1347                  * Set this and it will take effect when the
1348                  * target does a command complete.
1349                  */
1350                 ahd_freeze_devq(ahd, scb);
1351                 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1352                 ahd_freeze_scb(scb);
1353                 break;
1354         }
1355         case MKMSG_FAILED:
1356         {
1357                 struct ahd_devinfo devinfo;
1358                 struct scb *scb;
1359                 u_int scbid;
1360
1361                 ahd_fetch_devinfo(ahd, &devinfo);
1362                 printf("%s:%c:%d:%d: Attempt to issue message failed\n",
1363                        ahd_name(ahd), devinfo.channel, devinfo.target,
1364                        devinfo.lun);
1365                 scbid = ahd_get_scbptr(ahd);
1366                 scb = ahd_lookup_scb(ahd, scbid);
1367                 if (scb != NULL
1368                  && (scb->flags & SCB_RECOVERY_SCB) != 0)
1369                         /*
1370                          * Ensure that we didn't put a second instance of this
1371                          * SCB into the QINFIFO.
1372                          */
1373                         ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
1374                                            SCB_GET_CHANNEL(ahd, scb),
1375                                            SCB_GET_LUN(scb), SCB_GET_TAG(scb),
1376                                            ROLE_INITIATOR, /*status*/0,
1377                                            SEARCH_REMOVE);
1378                 ahd_outb(ahd, SCB_CONTROL,
1379                          ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
1380                 break;
1381         }
1382         case TASKMGMT_FUNC_COMPLETE:
1383         {
1384                 u_int   scbid;
1385                 struct  scb *scb;
1386
1387                 scbid = ahd_get_scbptr(ahd);
1388                 scb = ahd_lookup_scb(ahd, scbid);
1389                 if (scb != NULL) {
1390                         u_int      lun;
1391                         u_int      tag;
1392                         cam_status error;
1393
1394                         ahd_print_path(ahd, scb);
1395                         printf("Task Management Func 0x%x Complete\n",
1396                                scb->hscb->task_management);
1397                         lun = CAM_LUN_WILDCARD;
1398                         tag = SCB_LIST_NULL;
1399
1400                         switch (scb->hscb->task_management) {
1401                         case SIU_TASKMGMT_ABORT_TASK:
1402                                 tag = SCB_GET_TAG(scb);
1403                         case SIU_TASKMGMT_ABORT_TASK_SET:
1404                         case SIU_TASKMGMT_CLEAR_TASK_SET:
1405                                 lun = scb->hscb->lun;
1406                                 error = CAM_REQ_ABORTED;
1407                                 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1408                                                'A', lun, tag, ROLE_INITIATOR,
1409                                                error);
1410                                 break;
1411                         case SIU_TASKMGMT_LUN_RESET:
1412                                 lun = scb->hscb->lun;
1413                         case SIU_TASKMGMT_TARGET_RESET:
1414                         {
1415                                 struct ahd_devinfo devinfo;
1416
1417                                 ahd_scb_devinfo(ahd, &devinfo, scb);
1418                                 error = CAM_BDR_SENT;
1419                                 ahd_handle_devreset(ahd, &devinfo, lun,
1420                                                     CAM_BDR_SENT,
1421                                                     lun != CAM_LUN_WILDCARD
1422                                                     ? "Lun Reset"
1423                                                     : "Target Reset",
1424                                                     /*verbose_level*/0);
1425                                 break;
1426                         }
1427                         default:
1428                                 panic("Unexpected TaskMgmt Func\n");
1429                                 break;
1430                         }
1431                 }
1432                 break;
1433         }
1434         case TASKMGMT_CMD_CMPLT_OKAY:
1435         {
1436                 u_int   scbid;
1437                 struct  scb *scb;
1438
1439                 /*
1440                  * An ABORT TASK TMF failed to be delivered before
1441                  * the targeted command completed normally.
1442                  */
1443                 scbid = ahd_get_scbptr(ahd);
1444                 scb = ahd_lookup_scb(ahd, scbid);
1445                 if (scb != NULL) {
1446                         /*
1447                          * Remove the second instance of this SCB from
1448                          * the QINFIFO if it is still there.
1449                          */
1450                         ahd_print_path(ahd, scb);
1451                         printf("SCB completes before TMF\n");
1452                         /*
1453                          * Handle losing the race.  Wait until any
1454                          * current selection completes.  We will then
1455                          * set the TMF back to zero in this SCB so that
1456                          * the sequencer doesn't bother to issue another
1457                          * sequencer interrupt for its completion.
1458                          */
1459                         while ((ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
1460                             && (ahd_inb(ahd, SSTAT0) & SELDO) == 0
1461                             && (ahd_inb(ahd, SSTAT1) & SELTO) == 0)
1462                                 ;
1463                         ahd_outb(ahd, SCB_TASK_MANAGEMENT, 0);
1464                         ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
1465                                            SCB_GET_CHANNEL(ahd, scb),  
1466                                            SCB_GET_LUN(scb), SCB_GET_TAG(scb), 
1467                                            ROLE_INITIATOR, /*status*/0,   
1468                                            SEARCH_REMOVE);
1469                 }
1470                 break;
1471         }
1472         case TRACEPOINT0:
1473         case TRACEPOINT1:
1474         case TRACEPOINT2:
1475         case TRACEPOINT3:
1476                 printf("%s: Tracepoint %d\n", ahd_name(ahd),
1477                        seqintcode - TRACEPOINT0);
1478                 break;
1479         case NO_SEQINT:
1480                 break;
1481         case SAW_HWERR:
1482                 ahd_handle_hwerrint(ahd);
1483                 break;
1484         default:
1485                 printf("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd),
1486                        seqintcode);
1487                 break;
1488         }
1489         /*
1490          *  The sequencer is paused immediately on
1491          *  a SEQINT, so we should restart it when
1492          *  we're done.
1493          */
1494         ahd_unpause(ahd);
1495 }
1496
1497 void
1498 ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
1499 {
1500         struct scb      *scb;
1501         u_int            status0;
1502         u_int            status3;
1503         u_int            status;
1504         u_int            lqistat1;
1505         u_int            lqostat0;
1506         u_int            scbid;
1507         u_int            busfreetime;
1508
1509         ahd_update_modes(ahd);
1510         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1511
1512         status3 = ahd_inb(ahd, SSTAT3) & (NTRAMPERR|OSRAMPERR);
1513         status0 = ahd_inb(ahd, SSTAT0) & (IOERR|OVERRUN|SELDI|SELDO);
1514         status = ahd_inb(ahd, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
1515         lqistat1 = ahd_inb(ahd, LQISTAT1);
1516         lqostat0 = ahd_inb(ahd, LQOSTAT0);
1517         busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
1518
1519         /*
1520          * Ignore external resets after a bus reset.
1521          */
1522         if (((status & SCSIRSTI) != 0) && (ahd->flags & AHD_BUS_RESET_ACTIVE))
1523                 return;
1524
1525         /*
1526          * Clear bus reset flag
1527          */
1528         ahd->flags &= ~AHD_BUS_RESET_ACTIVE;
1529
1530         if ((status0 & (SELDI|SELDO)) != 0) {
1531                 u_int simode0;
1532
1533                 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1534                 simode0 = ahd_inb(ahd, SIMODE0);
1535                 status0 &= simode0 & (IOERR|OVERRUN|SELDI|SELDO);
1536                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1537         }
1538         scbid = ahd_get_scbptr(ahd);
1539         scb = ahd_lookup_scb(ahd, scbid);
1540         if (scb != NULL
1541          && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
1542                 scb = NULL;
1543
1544         if ((status0 & IOERR) != 0) {
1545                 u_int now_lvd;
1546
1547                 now_lvd = ahd_inb(ahd, SBLKCTL) & ENAB40;
1548                 printf("%s: Transceiver State Has Changed to %s mode\n",
1549                        ahd_name(ahd), now_lvd ? "LVD" : "SE");
1550                 ahd_outb(ahd, CLRSINT0, CLRIOERR);
1551                 /*
1552                  * A change in I/O mode is equivalent to a bus reset.
1553                  */
1554                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1555                 ahd_pause(ahd);
1556                 ahd_setup_iocell_workaround(ahd);
1557                 ahd_unpause(ahd);
1558         } else if ((status0 & OVERRUN) != 0) {
1559
1560                 printf("%s: SCSI offset overrun detected.  Resetting bus.\n",
1561                        ahd_name(ahd));
1562                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1563         } else if ((status & SCSIRSTI) != 0) {
1564
1565                 printf("%s: Someone reset channel A\n", ahd_name(ahd));
1566                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/FALSE);
1567         } else if ((status & SCSIPERR) != 0) {
1568
1569                 /* Make sure the sequencer is in a safe location. */
1570                 ahd_clear_critical_section(ahd);
1571
1572                 ahd_handle_transmission_error(ahd);
1573         } else if (lqostat0 != 0) {
1574
1575                 printf("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0);
1576                 ahd_outb(ahd, CLRLQOINT0, lqostat0);
1577                 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
1578                         ahd_outb(ahd, CLRLQOINT1, 0);
1579         } else if ((status & SELTO) != 0) {
1580                 u_int  scbid;
1581
1582                 /* Stop the selection */
1583                 ahd_outb(ahd, SCSISEQ0, 0);
1584
1585                 /* Make sure the sequencer is in a safe location. */
1586                 ahd_clear_critical_section(ahd);
1587
1588                 /* No more pending messages */
1589                 ahd_clear_msg_state(ahd);
1590
1591                 /* Clear interrupt state */
1592                 ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
1593
1594                 /*
1595                  * Although the driver does not care about the
1596                  * 'Selection in Progress' status bit, the busy
1597                  * LED does.  SELINGO is only cleared by a sucessfull
1598                  * selection, so we must manually clear it to insure
1599                  * the LED turns off just incase no future successful
1600                  * selections occur (e.g. no devices on the bus).
1601                  */
1602                 ahd_outb(ahd, CLRSINT0, CLRSELINGO);
1603
1604                 scbid = ahd_inw(ahd, WAITING_TID_HEAD);
1605                 scb = ahd_lookup_scb(ahd, scbid);
1606                 if (scb == NULL) {
1607                         printf("%s: ahd_intr - referenced scb not "
1608                                "valid during SELTO scb(0x%x)\n",
1609                                ahd_name(ahd), scbid);
1610                         ahd_dump_card_state(ahd);
1611                 } else {
1612                         struct ahd_devinfo devinfo;
1613 #ifdef AHD_DEBUG
1614                         if ((ahd_debug & AHD_SHOW_SELTO) != 0) {
1615                                 ahd_print_path(ahd, scb);
1616                                 printf("Saw Selection Timeout for SCB 0x%x\n",
1617                                        scbid);
1618                         }
1619 #endif
1620                         ahd_scb_devinfo(ahd, &devinfo, scb);
1621                         ahd_set_transaction_status(scb, CAM_SEL_TIMEOUT);
1622                         ahd_freeze_devq(ahd, scb);
1623
1624                         /*
1625                          * Cancel any pending transactions on the device
1626                          * now that it seems to be missing.  This will
1627                          * also revert us to async/narrow transfers until
1628                          * we can renegotiate with the device.
1629                          */
1630                         ahd_handle_devreset(ahd, &devinfo,
1631                                             CAM_LUN_WILDCARD,
1632                                             CAM_SEL_TIMEOUT,
1633                                             "Selection Timeout",
1634                                             /*verbose_level*/1);
1635                 }
1636                 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1637                 ahd_iocell_first_selection(ahd);
1638                 ahd_unpause(ahd);
1639         } else if ((status0 & (SELDI|SELDO)) != 0) {
1640
1641                 ahd_iocell_first_selection(ahd);
1642                 ahd_unpause(ahd);
1643         } else if (status3 != 0) {
1644                 printf("%s: SCSI Cell parity error SSTAT3 == 0x%x\n",
1645                        ahd_name(ahd), status3);
1646                 ahd_outb(ahd, CLRSINT3, status3);
1647         } else if ((lqistat1 & (LQIPHASE_LQ|LQIPHASE_NLQ)) != 0) {
1648
1649                 /* Make sure the sequencer is in a safe location. */
1650                 ahd_clear_critical_section(ahd);
1651
1652                 ahd_handle_lqiphase_error(ahd, lqistat1);
1653         } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
1654                 /*
1655                  * This status can be delayed during some
1656                  * streaming operations.  The SCSIPHASE
1657                  * handler has already dealt with this case
1658                  * so just clear the error.
1659                  */
1660                 ahd_outb(ahd, CLRLQIINT1, CLRLQICRCI_NLQ);
1661         } else if ((status & BUSFREE) != 0
1662                 || (lqistat1 & LQOBUSFREE) != 0) {
1663                 u_int lqostat1;
1664                 int   restart;
1665                 int   clear_fifo;
1666                 int   packetized;
1667                 u_int mode;
1668
1669                 /*
1670                  * Clear our selection hardware as soon as possible.
1671                  * We may have an entry in the waiting Q for this target,
1672                  * that is affected by this busfree and we don't want to
1673                  * go about selecting the target while we handle the event.
1674                  */
1675                 ahd_outb(ahd, SCSISEQ0, 0);
1676
1677                 /* Make sure the sequencer is in a safe location. */
1678                 ahd_clear_critical_section(ahd);
1679
1680                 /*
1681                  * Determine what we were up to at the time of
1682                  * the busfree.
1683                  */
1684                 mode = AHD_MODE_SCSI;
1685                 busfreetime = ahd_inb(ahd, SSTAT2) & BUSFREETIME;
1686                 lqostat1 = ahd_inb(ahd, LQOSTAT1);
1687                 switch (busfreetime) {
1688                 case BUSFREE_DFF0:
1689                 case BUSFREE_DFF1:
1690                 {
1691                         u_int   scbid;
1692                         struct  scb *scb;
1693
1694                         mode = busfreetime == BUSFREE_DFF0
1695                              ? AHD_MODE_DFF0 : AHD_MODE_DFF1;
1696                         ahd_set_modes(ahd, mode, mode);
1697                         scbid = ahd_get_scbptr(ahd);
1698                         scb = ahd_lookup_scb(ahd, scbid);
1699                         if (scb == NULL) {
1700                                 printf("%s: Invalid SCB %d in DFF%d "
1701                                        "during unexpected busfree\n",
1702                                        ahd_name(ahd), scbid, mode);
1703                                 packetized = 0;
1704                         } else
1705                                 packetized = (scb->flags & SCB_PACKETIZED) != 0;
1706                         clear_fifo = 1;
1707                         break;
1708                 }
1709                 case BUSFREE_LQO:
1710                         clear_fifo = 0;
1711                         packetized = 1;
1712                         break;
1713                 default:
1714                         clear_fifo = 0;
1715                         packetized =  (lqostat1 & LQOBUSFREE) != 0;
1716                         if (!packetized
1717                          && ahd_inb(ahd, LASTPHASE) == P_BUSFREE
1718                          && (ahd_inb(ahd, SSTAT0) & SELDI) == 0
1719                          && ((ahd_inb(ahd, SSTAT0) & SELDO) == 0
1720                           || (ahd_inb(ahd, SCSISEQ0) & ENSELO) == 0))
1721                                 /*
1722                                  * Assume packetized if we are not
1723                                  * on the bus in a non-packetized
1724                                  * capacity and any pending selection
1725                                  * was a packetized selection.
1726                                  */
1727                                 packetized = 1;
1728                         break;
1729                 }
1730
1731 #ifdef AHD_DEBUG
1732                 if ((ahd_debug & AHD_SHOW_MISC) != 0)
1733                         printf("Saw Busfree.  Busfreetime = 0x%x.\n",
1734                                busfreetime);
1735 #endif
1736                 /*
1737                  * Busfrees that occur in non-packetized phases are
1738                  * handled by the nonpkt_busfree handler.
1739                  */
1740                 if (packetized && ahd_inb(ahd, LASTPHASE) == P_BUSFREE) {
1741                         restart = ahd_handle_pkt_busfree(ahd, busfreetime);
1742                 } else {
1743                         packetized = 0;
1744                         restart = ahd_handle_nonpkt_busfree(ahd);
1745                 }
1746                 /*
1747                  * Clear the busfree interrupt status.  The setting of
1748                  * the interrupt is a pulse, so in a perfect world, we
1749                  * would not need to muck with the ENBUSFREE logic.  This
1750                  * would ensure that if the bus moves on to another
1751                  * connection, busfree protection is still in force.  If
1752                  * BUSFREEREV is broken, however, we must manually clear
1753                  * the ENBUSFREE if the busfree occurred during a non-pack
1754                  * connection so that we don't get false positives during
1755                  * future, packetized, connections.
1756                  */
1757                 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
1758                 if (packetized == 0
1759                  && (ahd->bugs & AHD_BUSFREEREV_BUG) != 0)
1760                         ahd_outb(ahd, SIMODE1,
1761                                  ahd_inb(ahd, SIMODE1) & ~ENBUSFREE);
1762
1763                 if (clear_fifo)
1764                         ahd_clear_fifo(ahd, mode);
1765
1766                 ahd_clear_msg_state(ahd);
1767                 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1768                 if (restart) {
1769                         ahd_restart(ahd);
1770                 } else {
1771                         ahd_unpause(ahd);
1772                 }
1773         } else {
1774                 printf("%s: Missing case in ahd_handle_scsiint. status = %x\n",
1775                        ahd_name(ahd), status);
1776                 ahd_dump_card_state(ahd);
1777                 ahd_clear_intstat(ahd);
1778                 ahd_unpause(ahd);
1779         }
1780 }
1781
1782 static void
1783 ahd_handle_transmission_error(struct ahd_softc *ahd)
1784 {
1785         struct  scb *scb;
1786         u_int   scbid;
1787         u_int   lqistat1;
1788         u_int   lqistat2;
1789         u_int   msg_out;
1790         u_int   curphase;
1791         u_int   lastphase;
1792         u_int   perrdiag;
1793         u_int   cur_col;
1794         int     silent;
1795
1796         scb = NULL;
1797         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1798         lqistat1 = ahd_inb(ahd, LQISTAT1) & ~(LQIPHASE_LQ|LQIPHASE_NLQ);
1799         lqistat2 = ahd_inb(ahd, LQISTAT2);
1800         if ((lqistat1 & (LQICRCI_NLQ|LQICRCI_LQ)) == 0
1801          && (ahd->bugs & AHD_NLQICRC_DELAYED_BUG) != 0) {
1802                 u_int lqistate;
1803
1804                 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
1805                 lqistate = ahd_inb(ahd, LQISTATE);
1806                 if ((lqistate >= 0x1E && lqistate <= 0x24)
1807                  || (lqistate == 0x29)) {
1808 #ifdef AHD_DEBUG
1809                         if ((ahd_debug & AHD_SHOW_RECOVERY) != 0) {
1810                                 printf("%s: NLQCRC found via LQISTATE\n",
1811                                        ahd_name(ahd));
1812                         }
1813 #endif
1814                         lqistat1 |= LQICRCI_NLQ;
1815                 }
1816                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1817         }
1818
1819         ahd_outb(ahd, CLRLQIINT1, lqistat1);
1820         lastphase = ahd_inb(ahd, LASTPHASE);
1821         curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
1822         perrdiag = ahd_inb(ahd, PERRDIAG);
1823         msg_out = MSG_INITIATOR_DET_ERR;
1824         ahd_outb(ahd, CLRSINT1, CLRSCSIPERR);
1825         
1826         /*
1827          * Try to find the SCB associated with this error.
1828          */
1829         silent = FALSE;
1830         if (lqistat1 == 0
1831          || (lqistat1 & LQICRCI_NLQ) != 0) {
1832                 if ((lqistat1 & (LQICRCI_NLQ|LQIOVERI_NLQ)) != 0)
1833                         ahd_set_active_fifo(ahd);
1834                 scbid = ahd_get_scbptr(ahd);
1835                 scb = ahd_lookup_scb(ahd, scbid);
1836                 if (scb != NULL && SCB_IS_SILENT(scb))
1837                         silent = TRUE;
1838         }
1839
1840         cur_col = 0;
1841         if (silent == FALSE) {
1842                 printf("%s: Transmission error detected\n", ahd_name(ahd));
1843                 ahd_lqistat1_print(lqistat1, &cur_col, 50);
1844                 ahd_lastphase_print(lastphase, &cur_col, 50);
1845                 ahd_scsisigi_print(curphase, &cur_col, 50);
1846                 ahd_perrdiag_print(perrdiag, &cur_col, 50);
1847                 printf("\n");
1848                 ahd_dump_card_state(ahd);
1849         }
1850
1851         if ((lqistat1 & (LQIOVERI_LQ|LQIOVERI_NLQ)) != 0) {
1852                 if (silent == FALSE) {
1853                         printf("%s: Gross protocol error during incoming "
1854                                "packet.  lqistat1 == 0x%x.  Resetting bus.\n",
1855                                ahd_name(ahd), lqistat1);
1856                 }
1857                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1858                 return;
1859         } else if ((lqistat1 & LQICRCI_LQ) != 0) {
1860                 /*
1861                  * A CRC error has been detected on an incoming LQ.
1862                  * The bus is currently hung on the last ACK.
1863                  * Hit LQIRETRY to release the last ack, and
1864                  * wait for the sequencer to determine that ATNO
1865                  * is asserted while in message out to take us
1866                  * to our host message loop.  No NONPACKREQ or
1867                  * LQIPHASE type errors will occur in this
1868                  * scenario.  After this first LQIRETRY, the LQI
1869                  * manager will be in ISELO where it will
1870                  * happily sit until another packet phase begins.
1871                  * Unexpected bus free detection is enabled
1872                  * through any phases that occur after we release
1873                  * this last ack until the LQI manager sees a
1874                  * packet phase.  This implies we may have to
1875                  * ignore a perfectly valid "unexected busfree"
1876                  * after our "initiator detected error" message is
1877                  * sent.  A busfree is the expected response after
1878                  * we tell the target that it's L_Q was corrupted.
1879                  * (SPI4R09 10.7.3.3.3)
1880                  */
1881                 ahd_outb(ahd, LQCTL2, LQIRETRY);
1882                 printf("LQIRetry for LQICRCI_LQ to release ACK\n");
1883         } else if ((lqistat1 & LQICRCI_NLQ) != 0) {
1884                 /*
1885                  * We detected a CRC error in a NON-LQ packet.
1886                  * The hardware has varying behavior in this situation
1887                  * depending on whether this packet was part of a
1888                  * stream or not.
1889                  *
1890                  * PKT by PKT mode:
1891                  * The hardware has already acked the complete packet.
1892                  * If the target honors our outstanding ATN condition,
1893                  * we should be (or soon will be) in MSGOUT phase.
1894                  * This will trigger the LQIPHASE_LQ status bit as the
1895                  * hardware was expecting another LQ.  Unexpected
1896                  * busfree detection is enabled.  Once LQIPHASE_LQ is
1897                  * true (first entry into host message loop is much
1898                  * the same), we must clear LQIPHASE_LQ and hit
1899                  * LQIRETRY so the hardware is ready to handle
1900                  * a future LQ.  NONPACKREQ will not be asserted again
1901                  * once we hit LQIRETRY until another packet is
1902                  * processed.  The target may either go busfree
1903                  * or start another packet in response to our message.
1904                  *
1905                  * Read Streaming P0 asserted:
1906                  * If we raise ATN and the target completes the entire
1907                  * stream (P0 asserted during the last packet), the
1908                  * hardware will ack all data and return to the ISTART
1909                  * state.  When the target reponds to our ATN condition,
1910                  * LQIPHASE_LQ will be asserted.  We should respond to
1911                  * this with an LQIRETRY to prepare for any future
1912                  * packets.  NONPACKREQ will not be asserted again
1913                  * once we hit LQIRETRY until another packet is
1914                  * processed.  The target may either go busfree or
1915                  * start another packet in response to our message.
1916                  * Busfree detection is enabled.
1917                  *
1918                  * Read Streaming P0 not asserted:
1919                  * If we raise ATN and the target transitions to
1920                  * MSGOUT in or after a packet where P0 is not
1921                  * asserted, the hardware will assert LQIPHASE_NLQ.
1922                  * We should respond to the LQIPHASE_NLQ with an
1923                  * LQIRETRY.  Should the target stay in a non-pkt
1924                  * phase after we send our message, the hardware
1925                  * will assert LQIPHASE_LQ.  Recovery is then just as
1926                  * listed above for the read streaming with P0 asserted.
1927                  * Busfree detection is enabled.
1928                  */
1929                 if (silent == FALSE)
1930                         printf("LQICRC_NLQ\n");
1931                 if (scb == NULL) {
1932                         printf("%s: No SCB valid for LQICRC_NLQ.  "
1933                                "Resetting bus\n", ahd_name(ahd));
1934                         ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1935                         return;
1936                 }
1937         } else if ((lqistat1 & LQIBADLQI) != 0) {
1938                 printf("Need to handle BADLQI!\n");
1939                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
1940                 return;
1941         } else if ((perrdiag & (PARITYERR|PREVPHASE)) == PARITYERR) {
1942                 if ((curphase & ~P_DATAIN_DT) != 0) {
1943                         /* Ack the byte.  So we can continue. */
1944                         if (silent == FALSE)
1945                                 printf("Acking %s to clear perror\n",
1946                                     ahd_lookup_phase_entry(curphase)->phasemsg);
1947                         ahd_inb(ahd, SCSIDAT);
1948                 }
1949         
1950                 if (curphase == P_MESGIN)
1951                         msg_out = MSG_PARITY_ERROR;
1952         }
1953
1954         /*
1955          * We've set the hardware to assert ATN if we 
1956          * get a parity error on "in" phases, so all we
1957          * need to do is stuff the message buffer with
1958          * the appropriate message.  "In" phases have set
1959          * mesg_out to something other than MSG_NOP.
1960          */
1961         ahd->send_msg_perror = msg_out;
1962         if (scb != NULL && msg_out == MSG_INITIATOR_DET_ERR)
1963                 scb->flags |= SCB_TRANSMISSION_ERROR;
1964         ahd_outb(ahd, MSG_OUT, HOST_MSG);
1965         ahd_outb(ahd, CLRINT, CLRSCSIINT);
1966         ahd_unpause(ahd);
1967 }
1968
1969 static void
1970 ahd_handle_lqiphase_error(struct ahd_softc *ahd, u_int lqistat1)
1971 {
1972         /*
1973          * Clear the sources of the interrupts.
1974          */
1975         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
1976         ahd_outb(ahd, CLRLQIINT1, lqistat1);
1977
1978         /*
1979          * If the "illegal" phase changes were in response
1980          * to our ATN to flag a CRC error, AND we ended up
1981          * on packet boundaries, clear the error, restart the
1982          * LQI manager as appropriate, and go on our merry
1983          * way toward sending the message.  Otherwise, reset
1984          * the bus to clear the error.
1985          */
1986         ahd_set_active_fifo(ahd);
1987         if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0
1988          && (ahd_inb(ahd, MDFFSTAT) & DLZERO) != 0) {
1989                 if ((lqistat1 & LQIPHASE_LQ) != 0) {
1990                         printf("LQIRETRY for LQIPHASE_LQ\n");
1991                         ahd_outb(ahd, LQCTL2, LQIRETRY);
1992                 } else if ((lqistat1 & LQIPHASE_NLQ) != 0) {
1993                         printf("LQIRETRY for LQIPHASE_NLQ\n");
1994                         ahd_outb(ahd, LQCTL2, LQIRETRY);
1995                 } else
1996                         panic("ahd_handle_lqiphase_error: No phase errors\n");
1997                 ahd_dump_card_state(ahd);
1998                 ahd_outb(ahd, CLRINT, CLRSCSIINT);
1999                 ahd_unpause(ahd);
2000         } else {
2001                 printf("Reseting Channel for LQI Phase error\n");
2002                 ahd_dump_card_state(ahd);
2003                 ahd_reset_channel(ahd, 'A', /*Initiate Reset*/TRUE);
2004         }
2005 }
2006
2007 /*
2008  * Packetized unexpected or expected busfree.
2009  * Entered in mode based on busfreetime.
2010  */
2011 static int
2012 ahd_handle_pkt_busfree(struct ahd_softc *ahd, u_int busfreetime)
2013 {
2014         u_int lqostat1;
2015
2016         AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
2017                          ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
2018         lqostat1 = ahd_inb(ahd, LQOSTAT1);
2019         if ((lqostat1 & LQOBUSFREE) != 0) {
2020                 struct scb *scb;
2021                 u_int scbid;
2022                 u_int saved_scbptr;
2023                 u_int waiting_h;
2024                 u_int waiting_t;
2025                 u_int next;
2026
2027                 /*
2028                  * The LQO manager detected an unexpected busfree
2029                  * either:
2030                  *
2031                  * 1) During an outgoing LQ.
2032                  * 2) After an outgoing LQ but before the first
2033                  *    REQ of the command packet.
2034                  * 3) During an outgoing command packet.
2035                  *
2036                  * In all cases, CURRSCB is pointing to the
2037                  * SCB that encountered the failure.  Clean
2038                  * up the queue, clear SELDO and LQOBUSFREE,
2039                  * and allow the sequencer to restart the select
2040                  * out at its lesure.
2041                  */
2042                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2043                 scbid = ahd_inw(ahd, CURRSCB);
2044                 scb = ahd_lookup_scb(ahd, scbid);
2045                 if (scb == NULL)
2046                        panic("SCB not valid during LQOBUSFREE");
2047                 /*
2048                  * Clear the status.
2049                  */
2050                 ahd_outb(ahd, CLRLQOINT1, CLRLQOBUSFREE);
2051                 if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0)
2052                         ahd_outb(ahd, CLRLQOINT1, 0);
2053                 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2054                 ahd_flush_device_writes(ahd);
2055                 ahd_outb(ahd, CLRSINT0, CLRSELDO);
2056
2057                 /*
2058                  * Return the LQO manager to its idle loop.  It will
2059                  * not do this automatically if the busfree occurs
2060                  * after the first REQ of either the LQ or command
2061                  * packet or between the LQ and command packet.
2062                  */
2063                 ahd_outb(ahd, LQCTL2, ahd_inb(ahd, LQCTL2) | LQOTOIDLE);
2064
2065                 /*
2066                  * Update the waiting for selection queue so
2067                  * we restart on the correct SCB.
2068                  */
2069                 waiting_h = ahd_inw(ahd, WAITING_TID_HEAD);
2070                 saved_scbptr = ahd_get_scbptr(ahd);
2071                 if (waiting_h != scbid) {
2072
2073                         ahd_outw(ahd, WAITING_TID_HEAD, scbid);
2074                         waiting_t = ahd_inw(ahd, WAITING_TID_TAIL);
2075                         if (waiting_t == waiting_h) {
2076                                 ahd_outw(ahd, WAITING_TID_TAIL, scbid);
2077                                 next = SCB_LIST_NULL;
2078                         } else {
2079                                 ahd_set_scbptr(ahd, waiting_h);
2080                                 next = ahd_inw_scbram(ahd, SCB_NEXT2);
2081                         }
2082                         ahd_set_scbptr(ahd, scbid);
2083                         ahd_outw(ahd, SCB_NEXT2, next);
2084                 }
2085                 ahd_set_scbptr(ahd, saved_scbptr);
2086                 if (scb->crc_retry_count < AHD_MAX_LQ_CRC_ERRORS) {
2087                         if (SCB_IS_SILENT(scb) == FALSE) {
2088                                 ahd_print_path(ahd, scb);
2089                                 printf("Probable outgoing LQ CRC error.  "
2090                                        "Retrying command\n");
2091                         }
2092                         scb->crc_retry_count++;
2093                 } else {
2094                         ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
2095                         ahd_freeze_scb(scb);
2096                         ahd_freeze_devq(ahd, scb);
2097                 }
2098                 /* Return unpausing the sequencer. */
2099                 return (0);
2100         } else if ((ahd_inb(ahd, PERRDIAG) & PARITYERR) != 0) {
2101                 /*
2102                  * Ignore what are really parity errors that
2103                  * occur on the last REQ of a free running
2104                  * clock prior to going busfree.  Some drives
2105                  * do not properly active negate just before
2106                  * going busfree resulting in a parity glitch.
2107                  */
2108                 ahd_outb(ahd, CLRSINT1, CLRSCSIPERR|CLRBUSFREE);
2109 #ifdef AHD_DEBUG
2110                 if ((ahd_debug & AHD_SHOW_MASKED_ERRORS) != 0)
2111                         printf("%s: Parity on last REQ detected "
2112                                "during busfree phase.\n",
2113                                ahd_name(ahd));
2114 #endif
2115                 /* Return unpausing the sequencer. */
2116                 return (0);
2117         }
2118         if (ahd->src_mode != AHD_MODE_SCSI) {
2119                 u_int   scbid;
2120                 struct  scb *scb;
2121
2122                 scbid = ahd_get_scbptr(ahd);
2123                 scb = ahd_lookup_scb(ahd, scbid);
2124                 ahd_print_path(ahd, scb);
2125                 printf("Unexpected PKT busfree condition\n");
2126                 ahd_dump_card_state(ahd);
2127                 ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb), 'A',
2128                                SCB_GET_LUN(scb), SCB_GET_TAG(scb),
2129                                ROLE_INITIATOR, CAM_UNEXP_BUSFREE);
2130
2131                 /* Return restarting the sequencer. */
2132                 return (1);
2133         }
2134         printf("%s: Unexpected PKT busfree condition\n", ahd_name(ahd));
2135         ahd_dump_card_state(ahd);
2136         /* Restart the sequencer. */
2137         return (1);
2138 }
2139
2140 /*
2141  * Non-packetized unexpected or expected busfree.
2142  */
2143 static int
2144 ahd_handle_nonpkt_busfree(struct ahd_softc *ahd)
2145 {
2146         struct  ahd_devinfo devinfo;
2147         struct  scb *scb;
2148         u_int   lastphase;
2149         u_int   saved_scsiid;
2150         u_int   saved_lun;
2151         u_int   target;
2152         u_int   initiator_role_id;
2153         u_int   scbid;
2154         u_int   ppr_busfree;
2155         int     printerror;
2156
2157         /*
2158          * Look at what phase we were last in.  If its message out,
2159          * chances are pretty good that the busfree was in response
2160          * to one of our abort requests.
2161          */
2162         lastphase = ahd_inb(ahd, LASTPHASE);
2163         saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2164         saved_lun = ahd_inb(ahd, SAVED_LUN);
2165         target = SCSIID_TARGET(ahd, saved_scsiid);
2166         initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
2167         ahd_compile_devinfo(&devinfo, initiator_role_id,
2168                             target, saved_lun, 'A', ROLE_INITIATOR);
2169         printerror = 1;
2170
2171         scbid = ahd_get_scbptr(ahd);
2172         scb = ahd_lookup_scb(ahd, scbid);
2173         if (scb != NULL
2174          && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
2175                 scb = NULL;
2176
2177         ppr_busfree = (ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0;
2178         if (lastphase == P_MESGOUT) {
2179                 u_int tag;
2180
2181                 tag = SCB_LIST_NULL;
2182                 if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT_TAG, TRUE)
2183                  || ahd_sent_msg(ahd, AHDMSG_1B, MSG_ABORT, TRUE)) {
2184                         int found;
2185                         int sent_msg;
2186
2187                         if (scb == NULL) {
2188                                 ahd_print_devinfo(ahd, &devinfo);
2189                                 printf("Abort for unidentified "
2190                                        "connection completed.\n");
2191                                 /* restart the sequencer. */
2192                                 return (1);
2193                         }
2194                         sent_msg = ahd->msgout_buf[ahd->msgout_index - 1];
2195                         ahd_print_path(ahd, scb);
2196                         printf("SCB %d - Abort%s Completed.\n",
2197                                SCB_GET_TAG(scb),
2198                                sent_msg == MSG_ABORT_TAG ? "" : " Tag");
2199
2200                         if (sent_msg == MSG_ABORT_TAG)
2201                                 tag = SCB_GET_TAG(scb);
2202
2203                         found = ahd_abort_scbs(ahd, target, 'A', saved_lun,
2204                                                tag, ROLE_INITIATOR,
2205                                                CAM_REQ_ABORTED);
2206                         printf("found == 0x%x\n", found);
2207                         printerror = 0;
2208                 } else if (ahd_sent_msg(ahd, AHDMSG_1B,
2209                                         MSG_BUS_DEV_RESET, TRUE)) {
2210 #ifdef __FreeBSD__
2211                         /*
2212                          * Don't mark the user's request for this BDR
2213                          * as completing with CAM_BDR_SENT.  CAM3
2214                          * specifies CAM_REQ_CMP.
2215                          */
2216                         if (scb != NULL
2217                          && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
2218                          && ahd_match_scb(ahd, scb, target, 'A',
2219                                           CAM_LUN_WILDCARD, SCB_LIST_NULL,
2220                                           ROLE_INITIATOR))
2221                                 ahd_set_transaction_status(scb, CAM_REQ_CMP);
2222 #endif
2223                         ahd_handle_devreset(ahd, &devinfo, CAM_LUN_WILDCARD,
2224                                             CAM_BDR_SENT, "Bus Device Reset",
2225                                             /*verbose_level*/0);
2226                         printerror = 0;
2227                 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, FALSE)
2228                         && ppr_busfree == 0) {
2229                         struct ahd_initiator_tinfo *tinfo;
2230                         struct ahd_tmode_tstate *tstate;
2231
2232                         /*
2233                          * PPR Rejected.
2234                          *
2235                          * If the previous negotiation was packetized,
2236                          * this could be because the device has been
2237                          * reset without our knowledge.  Force our
2238                          * current negotiation to async and retry the
2239                          * negotiation.  Otherwise retry the command
2240                          * with non-ppr negotiation.
2241                          */
2242 #ifdef AHD_DEBUG
2243                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2244                                 printf("PPR negotiation rejected busfree.\n");
2245 #endif
2246                         tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
2247                                                     devinfo.our_scsiid,
2248                                                     devinfo.target, &tstate);
2249                         if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ)!=0) {
2250                                 ahd_set_width(ahd, &devinfo,
2251                                               MSG_EXT_WDTR_BUS_8_BIT,
2252                                               AHD_TRANS_CUR,
2253                                               /*paused*/TRUE);
2254                                 ahd_set_syncrate(ahd, &devinfo,
2255                                                 /*period*/0, /*offset*/0,
2256                                                 /*ppr_options*/0,
2257                                                 AHD_TRANS_CUR,
2258                                                 /*paused*/TRUE);
2259                                 /*
2260                                  * The expect PPR busfree handler below
2261                                  * will effect the retry and necessary
2262                                  * abort.
2263                                  */
2264                         } else {
2265                                 tinfo->curr.transport_version = 2;
2266                                 tinfo->goal.transport_version = 2;
2267                                 tinfo->goal.ppr_options = 0;
2268                                 /*
2269                                  * Remove any SCBs in the waiting for selection
2270                                  * queue that may also be for this target so
2271                                  * that command ordering is preserved.
2272                                  */
2273                                 ahd_freeze_devq(ahd, scb);
2274                                 ahd_qinfifo_requeue_tail(ahd, scb);
2275                                 printerror = 0;
2276                         }
2277                 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, FALSE)
2278                         && ppr_busfree == 0) {
2279                         /*
2280                          * Negotiation Rejected.  Go-narrow and
2281                          * retry command.
2282                          */
2283 #ifdef AHD_DEBUG
2284                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2285                                 printf("WDTR negotiation rejected busfree.\n");
2286 #endif
2287                         ahd_set_width(ahd, &devinfo,
2288                                       MSG_EXT_WDTR_BUS_8_BIT,
2289                                       AHD_TRANS_CUR|AHD_TRANS_GOAL,
2290                                       /*paused*/TRUE);
2291                         /*
2292                          * Remove any SCBs in the waiting for selection
2293                          * queue that may also be for this target so that
2294                          * command ordering is preserved.
2295                          */
2296                         ahd_freeze_devq(ahd, scb);
2297                         ahd_qinfifo_requeue_tail(ahd, scb);
2298                         printerror = 0;
2299                 } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, FALSE)
2300                         && ppr_busfree == 0) {
2301                         /*
2302                          * Negotiation Rejected.  Go-async and
2303                          * retry command.
2304                          */
2305 #ifdef AHD_DEBUG
2306                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2307                                 printf("SDTR negotiation rejected busfree.\n");
2308 #endif
2309                         ahd_set_syncrate(ahd, &devinfo,
2310                                         /*period*/0, /*offset*/0,
2311                                         /*ppr_options*/0,
2312                                         AHD_TRANS_CUR|AHD_TRANS_GOAL,
2313                                         /*paused*/TRUE);
2314                         /*
2315                          * Remove any SCBs in the waiting for selection
2316                          * queue that may also be for this target so that
2317                          * command ordering is preserved.
2318                          */
2319                         ahd_freeze_devq(ahd, scb);
2320                         ahd_qinfifo_requeue_tail(ahd, scb);
2321                         printerror = 0;
2322                 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_IDE_BUSFREE) != 0
2323                         && ahd_sent_msg(ahd, AHDMSG_1B,
2324                                          MSG_INITIATOR_DET_ERR, TRUE)) {
2325
2326 #ifdef AHD_DEBUG
2327                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2328                                 printf("Expected IDE Busfree\n");
2329 #endif
2330                         printerror = 0;
2331                 } else if ((ahd->msg_flags & MSG_FLAG_EXPECT_QASREJ_BUSFREE)
2332                         && ahd_sent_msg(ahd, AHDMSG_1B,
2333                                         MSG_MESSAGE_REJECT, TRUE)) {
2334
2335 #ifdef AHD_DEBUG
2336                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2337                                 printf("Expected QAS Reject Busfree\n");
2338 #endif
2339                         printerror = 0;
2340                 }
2341         }
2342
2343         /*
2344          * The busfree required flag is honored at the end of
2345          * the message phases.  We check it last in case we
2346          * had to send some other message that caused a busfree.
2347          */
2348         if (printerror != 0
2349          && (lastphase == P_MESGIN || lastphase == P_MESGOUT)
2350          && ((ahd->msg_flags & MSG_FLAG_EXPECT_PPR_BUSFREE) != 0)) {
2351
2352                 ahd_freeze_devq(ahd, scb);
2353                 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
2354                 ahd_freeze_scb(scb);
2355                 if ((ahd->msg_flags & MSG_FLAG_IU_REQ_CHANGED) != 0) {
2356                         ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
2357                                        SCB_GET_CHANNEL(ahd, scb),
2358                                        SCB_GET_LUN(scb), SCB_LIST_NULL,
2359                                        ROLE_INITIATOR, CAM_REQ_ABORTED);
2360                 } else {
2361 #ifdef AHD_DEBUG
2362                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
2363                                 printf("PPR Negotiation Busfree.\n");
2364 #endif
2365                         ahd_done(ahd, scb);
2366                 }
2367                 printerror = 0;
2368         }
2369         if (printerror != 0) {
2370                 int aborted;
2371
2372                 aborted = 0;
2373                 if (scb != NULL) {
2374                         u_int tag;
2375
2376                         if ((scb->hscb->control & TAG_ENB) != 0)
2377                                 tag = SCB_GET_TAG(scb);
2378                         else
2379                                 tag = SCB_LIST_NULL;
2380                         ahd_print_path(ahd, scb);
2381                         aborted = ahd_abort_scbs(ahd, target, 'A',
2382                                        SCB_GET_LUN(scb), tag,
2383                                        ROLE_INITIATOR,
2384                                        CAM_UNEXP_BUSFREE);
2385                 } else {
2386                         /*
2387                          * We had not fully identified this connection,
2388                          * so we cannot abort anything.
2389                          */
2390                         printf("%s: ", ahd_name(ahd));
2391                 }
2392                 printf("Unexpected busfree %s, %d SCBs aborted, "
2393                        "PRGMCNT == 0x%x\n",
2394                        ahd_lookup_phase_entry(lastphase)->phasemsg,
2395                        aborted,
2396                        ahd_inw(ahd, PRGMCNT));
2397                 ahd_dump_card_state(ahd);
2398                 if (lastphase != P_BUSFREE)
2399                         ahd_force_renegotiation(ahd, &devinfo);
2400         }
2401         /* Always restart the sequencer. */
2402         return (1);
2403 }
2404
2405 static void
2406 ahd_handle_proto_violation(struct ahd_softc *ahd)
2407 {
2408         struct  ahd_devinfo devinfo;
2409         struct  scb *scb;
2410         u_int   scbid;
2411         u_int   seq_flags;
2412         u_int   curphase;
2413         u_int   lastphase;
2414         int     found;
2415
2416         ahd_fetch_devinfo(ahd, &devinfo);
2417         scbid = ahd_get_scbptr(ahd);
2418         scb = ahd_lookup_scb(ahd, scbid);
2419         seq_flags = ahd_inb(ahd, SEQ_FLAGS);
2420         curphase = ahd_inb(ahd, SCSISIGI) & PHASE_MASK;
2421         lastphase = ahd_inb(ahd, LASTPHASE);
2422         if ((seq_flags & NOT_IDENTIFIED) != 0) {
2423
2424                 /*
2425                  * The reconnecting target either did not send an
2426                  * identify message, or did, but we didn't find an SCB
2427                  * to match.
2428                  */
2429                 ahd_print_devinfo(ahd, &devinfo);
2430                 printf("Target did not send an IDENTIFY message. "
2431                        "LASTPHASE = 0x%x.\n", lastphase);
2432                 scb = NULL;
2433         } else if (scb == NULL) {
2434                 /*
2435                  * We don't seem to have an SCB active for this
2436                  * transaction.  Print an error and reset the bus.
2437                  */
2438                 ahd_print_devinfo(ahd, &devinfo);
2439                 printf("No SCB found during protocol violation\n");
2440                 goto proto_violation_reset;
2441         } else {
2442                 ahd_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
2443                 if ((seq_flags & NO_CDB_SENT) != 0) {
2444                         ahd_print_path(ahd, scb);
2445                         printf("No or incomplete CDB sent to device.\n");
2446                 } else if ((ahd_inb_scbram(ahd, SCB_CONTROL)
2447                           & STATUS_RCVD) == 0) {
2448                         /*
2449                          * The target never bothered to provide status to
2450                          * us prior to completing the command.  Since we don't
2451                          * know the disposition of this command, we must attempt
2452                          * to abort it.  Assert ATN and prepare to send an abort
2453                          * message.
2454                          */
2455                         ahd_print_path(ahd, scb);
2456                         printf("Completed command without status.\n");
2457                 } else {
2458                         ahd_print_path(ahd, scb);
2459                         printf("Unknown protocol violation.\n");
2460                         ahd_dump_card_state(ahd);
2461                 }
2462         }
2463         if ((lastphase & ~P_DATAIN_DT) == 0
2464          || lastphase == P_COMMAND) {
2465 proto_violation_reset:
2466                 /*
2467                  * Target either went directly to data
2468                  * phase or didn't respond to our ATN.
2469                  * The only safe thing to do is to blow
2470                  * it away with a bus reset.
2471                  */
2472                 found = ahd_reset_channel(ahd, 'A', TRUE);
2473                 printf("%s: Issued Channel %c Bus Reset. "
2474                        "%d SCBs aborted\n", ahd_name(ahd), 'A', found);
2475         } else {
2476                 /*
2477                  * Leave the selection hardware off in case
2478                  * this abort attempt will affect yet to
2479                  * be sent commands.
2480                  */
2481                 ahd_outb(ahd, SCSISEQ0,
2482                          ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
2483                 ahd_assert_atn(ahd);
2484                 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2485                 if (scb == NULL) {
2486                         ahd_print_devinfo(ahd, &devinfo);
2487                         ahd->msgout_buf[0] = MSG_ABORT_TASK;
2488                         ahd->msgout_len = 1;
2489                         ahd->msgout_index = 0;
2490                         ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
2491                 } else {
2492                         ahd_print_path(ahd, scb);
2493                         scb->flags |= SCB_ABORT;
2494                 }
2495                 printf("Protocol violation %s.  Attempting to abort.\n",
2496                        ahd_lookup_phase_entry(curphase)->phasemsg);
2497         }
2498 }
2499
2500 /*
2501  * Force renegotiation to occur the next time we initiate
2502  * a command to the current device.
2503  */
2504 static void
2505 ahd_force_renegotiation(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
2506 {
2507         struct  ahd_initiator_tinfo *targ_info;
2508         struct  ahd_tmode_tstate *tstate;
2509
2510 #ifdef AHD_DEBUG
2511         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
2512                 ahd_print_devinfo(ahd, devinfo);
2513                 printf("Forcing renegotiation\n");
2514         }
2515 #endif
2516         targ_info = ahd_fetch_transinfo(ahd,
2517                                         devinfo->channel,
2518                                         devinfo->our_scsiid,
2519                                         devinfo->target,
2520                                         &tstate);
2521         ahd_update_neg_request(ahd, devinfo, tstate,
2522                                targ_info, AHD_NEG_IF_NON_ASYNC);
2523 }
2524
2525 #define AHD_MAX_STEPS 2000
2526 void
2527 ahd_clear_critical_section(struct ahd_softc *ahd)
2528 {
2529         ahd_mode_state  saved_modes;
2530         int             stepping;
2531         int             steps;
2532         int             first_instr;
2533         u_int           simode0;
2534         u_int           simode1;
2535         u_int           simode3;
2536         u_int           lqimode0;
2537         u_int           lqimode1;
2538         u_int           lqomode0;
2539         u_int           lqomode1;
2540
2541         if (ahd->num_critical_sections == 0)
2542                 return;
2543
2544         stepping = FALSE;
2545         steps = 0;
2546         first_instr = 0;
2547         simode0 = 0;
2548         simode1 = 0;
2549         simode3 = 0;
2550         lqimode0 = 0;
2551         lqimode1 = 0;
2552         lqomode0 = 0;
2553         lqomode1 = 0;
2554         saved_modes = ahd_save_modes(ahd);
2555         for (;;) {
2556                 struct  cs *cs;
2557                 u_int   seqaddr;
2558                 u_int   i;
2559
2560                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2561                 seqaddr = ahd_inw(ahd, CURADDR);
2562
2563                 cs = ahd->critical_sections;
2564                 for (i = 0; i < ahd->num_critical_sections; i++, cs++) {
2565                         
2566                         if (cs->begin < seqaddr && cs->end >= seqaddr)
2567                                 break;
2568                 }
2569
2570                 if (i == ahd->num_critical_sections)
2571                         break;
2572
2573                 if (steps > AHD_MAX_STEPS) {
2574                         printf("%s: Infinite loop in critical section\n"
2575                                "%s: First Instruction 0x%x now 0x%x\n",
2576                                ahd_name(ahd), ahd_name(ahd), first_instr,
2577                                seqaddr);
2578                         ahd_dump_card_state(ahd);
2579                         panic("critical section loop");
2580                 }
2581
2582                 steps++;
2583 #ifdef AHD_DEBUG
2584                 if ((ahd_debug & AHD_SHOW_MISC) != 0)
2585                         printf("%s: Single stepping at 0x%x\n", ahd_name(ahd),
2586                                seqaddr);
2587 #endif
2588                 if (stepping == FALSE) {
2589
2590                         first_instr = seqaddr;
2591                         ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2592                         simode0 = ahd_inb(ahd, SIMODE0);
2593                         simode3 = ahd_inb(ahd, SIMODE3);
2594                         lqimode0 = ahd_inb(ahd, LQIMODE0);
2595                         lqimode1 = ahd_inb(ahd, LQIMODE1);
2596                         lqomode0 = ahd_inb(ahd, LQOMODE0);
2597                         lqomode1 = ahd_inb(ahd, LQOMODE1);
2598                         ahd_outb(ahd, SIMODE0, 0);
2599                         ahd_outb(ahd, SIMODE3, 0);
2600                         ahd_outb(ahd, LQIMODE0, 0);
2601                         ahd_outb(ahd, LQIMODE1, 0);
2602                         ahd_outb(ahd, LQOMODE0, 0);
2603                         ahd_outb(ahd, LQOMODE1, 0);
2604                         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2605                         simode1 = ahd_inb(ahd, SIMODE1);
2606                         /*
2607                          * We don't clear ENBUSFREE.  Unfortunately
2608                          * we cannot re-enable busfree detection within
2609                          * the current connection, so we must leave it
2610                          * on while single stepping.
2611                          */
2612                         ahd_outb(ahd, SIMODE1, simode1 & ENBUSFREE);
2613                         ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) | STEP);
2614                         stepping = TRUE;
2615                 }
2616                 ahd_outb(ahd, CLRSINT1, CLRBUSFREE);
2617                 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2618                 ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
2619                 ahd_outb(ahd, HCNTRL, ahd->unpause);
2620                 while (!ahd_is_paused(ahd))
2621                         ahd_delay(200);
2622                 ahd_update_modes(ahd);
2623         }
2624         if (stepping) {
2625                 ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
2626                 ahd_outb(ahd, SIMODE0, simode0);
2627                 ahd_outb(ahd, SIMODE3, simode3);
2628                 ahd_outb(ahd, LQIMODE0, lqimode0);
2629                 ahd_outb(ahd, LQIMODE1, lqimode1);
2630                 ahd_outb(ahd, LQOMODE0, lqomode0);
2631                 ahd_outb(ahd, LQOMODE1, lqomode1);
2632                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2633                 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
2634                 ahd_outb(ahd, SIMODE1, simode1);
2635                 /*
2636                  * SCSIINT seems to glitch occassionally when
2637                  * the interrupt masks are restored.  Clear SCSIINT
2638                  * one more time so that only persistent errors
2639                  * are seen as a real interrupt.
2640                  */
2641                 ahd_outb(ahd, CLRINT, CLRSCSIINT);
2642         }
2643         ahd_restore_modes(ahd, saved_modes);
2644 }
2645
2646 /*
2647  * Clear any pending interrupt status.
2648  */
2649 void
2650 ahd_clear_intstat(struct ahd_softc *ahd)
2651 {
2652         AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
2653                          ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
2654         /* Clear any interrupt conditions this may have caused */
2655         ahd_outb(ahd, CLRLQIINT0, CLRLQIATNQAS|CLRLQICRCT1|CLRLQICRCT2
2656                                  |CLRLQIBADLQT|CLRLQIATNLQ|CLRLQIATNCMD);
2657         ahd_outb(ahd, CLRLQIINT1, CLRLQIPHASE_LQ|CLRLQIPHASE_NLQ|CLRLIQABORT
2658                                  |CLRLQICRCI_LQ|CLRLQICRCI_NLQ|CLRLQIBADLQI
2659                                  |CLRLQIOVERI_LQ|CLRLQIOVERI_NLQ|CLRNONPACKREQ);
2660         ahd_outb(ahd, CLRLQOINT0, CLRLQOTARGSCBPERR|CLRLQOSTOPT2|CLRLQOATNLQ
2661                                  |CLRLQOATNPKT|CLRLQOTCRC);
2662         ahd_outb(ahd, CLRLQOINT1, CLRLQOINITSCBPERR|CLRLQOSTOPI2|CLRLQOBADQAS
2663                                  |CLRLQOBUSFREE|CLRLQOPHACHGINPKT);
2664         if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) {
2665                 ahd_outb(ahd, CLRLQOINT0, 0);
2666                 ahd_outb(ahd, CLRLQOINT1, 0);
2667         }
2668         ahd_outb(ahd, CLRSINT3, CLRNTRAMPERR|CLROSRAMPERR);
2669         ahd_outb(ahd, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
2670                                 |CLRBUSFREE|CLRSCSIPERR|CLRREQINIT);
2671         ahd_outb(ahd, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO
2672                                 |CLRIOERR|CLROVERRUN);
2673         ahd_outb(ahd, CLRINT, CLRSCSIINT);
2674 }
2675
2676 /**************************** Debugging Routines ******************************/
2677 #ifdef AHD_DEBUG
2678 uint32_t ahd_debug = AHD_DEBUG_OPTS;
2679 #endif
2680 void
2681 ahd_print_scb(struct scb *scb)
2682 {
2683         struct hardware_scb *hscb;
2684         int i;
2685
2686         hscb = scb->hscb;
2687         printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
2688                (void *)scb,
2689                hscb->control,
2690                hscb->scsiid,
2691                hscb->lun,
2692                hscb->cdb_len);
2693         printf("Shared Data: ");
2694         for (i = 0; i < sizeof(hscb->shared_data.idata.cdb); i++)
2695                 printf("%#02x", hscb->shared_data.idata.cdb[i]);
2696         printf("        dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n",
2697                (uint32_t)((ahd_le64toh(hscb->dataptr) >> 32) & 0xFFFFFFFF),
2698                (uint32_t)(ahd_le64toh(hscb->dataptr) & 0xFFFFFFFF),
2699                ahd_le32toh(hscb->datacnt),
2700                ahd_le32toh(hscb->sgptr),
2701                SCB_GET_TAG(scb));
2702         ahd_dump_sglist(scb);
2703 }
2704
2705 void
2706 ahd_dump_sglist(struct scb *scb)
2707 {
2708         int i;
2709
2710         if (scb->sg_count > 0) {
2711                 if ((scb->ahd_softc->flags & AHD_64BIT_ADDRESSING) != 0) {
2712                         struct ahd_dma64_seg *sg_list;
2713
2714                         sg_list = (struct ahd_dma64_seg*)scb->sg_list;
2715                         for (i = 0; i < scb->sg_count; i++) {
2716                                 uint64_t addr;
2717                                 uint32_t len;
2718
2719                                 addr = ahd_le64toh(sg_list[i].addr);
2720                                 len = ahd_le32toh(sg_list[i].len);
2721                                 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
2722                                        i,
2723                                        (uint32_t)((addr >> 32) & 0xFFFFFFFF),
2724                                        (uint32_t)(addr & 0xFFFFFFFF),
2725                                        sg_list[i].len & AHD_SG_LEN_MASK,
2726                                        (sg_list[i].len & AHD_DMA_LAST_SEG)
2727                                      ? " Last" : "");
2728                         }
2729                 } else {
2730                         struct ahd_dma_seg *sg_list;
2731
2732                         sg_list = (struct ahd_dma_seg*)scb->sg_list;
2733                         for (i = 0; i < scb->sg_count; i++) {
2734                                 uint32_t len;
2735
2736                                 len = ahd_le32toh(sg_list[i].len);
2737                                 printf("sg[%d] - Addr 0x%x%x : Length %d%s\n",
2738                                        i,
2739                                        (len & AHD_SG_HIGH_ADDR_MASK) >> 24,
2740                                        ahd_le32toh(sg_list[i].addr),
2741                                        len & AHD_SG_LEN_MASK,
2742                                        len & AHD_DMA_LAST_SEG ? " Last" : "");
2743                         }
2744                 }
2745         }
2746 }
2747
2748 /************************* Transfer Negotiation *******************************/
2749 /*
2750  * Allocate per target mode instance (ID we respond to as a target)
2751  * transfer negotiation data structures.
2752  */
2753 static struct ahd_tmode_tstate *
2754 ahd_alloc_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel)
2755 {
2756         struct ahd_tmode_tstate *master_tstate;
2757         struct ahd_tmode_tstate *tstate;
2758         int i;
2759
2760         master_tstate = ahd->enabled_targets[ahd->our_id];
2761         if (ahd->enabled_targets[scsi_id] != NULL
2762          && ahd->enabled_targets[scsi_id] != master_tstate)
2763                 panic("%s: ahd_alloc_tstate - Target already allocated",
2764                       ahd_name(ahd));
2765         tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT);
2766         if (tstate == NULL)
2767                 return (NULL);
2768
2769         /*
2770          * If we have allocated a master tstate, copy user settings from
2771          * the master tstate (taken from SRAM or the EEPROM) for this
2772          * channel, but reset our current and goal settings to async/narrow
2773          * until an initiator talks to us.
2774          */
2775         if (master_tstate != NULL) {
2776                 memcpy(tstate, master_tstate, sizeof(*tstate));
2777                 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
2778                 for (i = 0; i < 16; i++) {
2779                         memset(&tstate->transinfo[i].curr, 0,
2780                               sizeof(tstate->transinfo[i].curr));
2781                         memset(&tstate->transinfo[i].goal, 0,
2782                               sizeof(tstate->transinfo[i].goal));
2783                 }
2784         } else
2785                 memset(tstate, 0, sizeof(*tstate));
2786         ahd->enabled_targets[scsi_id] = tstate;
2787         return (tstate);
2788 }
2789
2790 #ifdef AHD_TARGET_MODE
2791 /*
2792  * Free per target mode instance (ID we respond to as a target)
2793  * transfer negotiation data structures.
2794  */
2795 static void
2796 ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force)
2797 {
2798         struct ahd_tmode_tstate *tstate;
2799
2800         /*
2801          * Don't clean up our "master" tstate.
2802          * It has our default user settings.
2803          */
2804         if (scsi_id == ahd->our_id
2805          && force == FALSE)
2806                 return;
2807
2808         tstate = ahd->enabled_targets[scsi_id];
2809         if (tstate != NULL)
2810                 free(tstate, M_DEVBUF);
2811         ahd->enabled_targets[scsi_id] = NULL;
2812 }
2813 #endif
2814
2815 /*
2816  * Called when we have an active connection to a target on the bus,
2817  * this function finds the nearest period to the input period limited
2818  * by the capabilities of the bus connectivity of and sync settings for
2819  * the target.
2820  */
2821 void
2822 ahd_devlimited_syncrate(struct ahd_softc *ahd,
2823                         struct ahd_initiator_tinfo *tinfo,
2824                         u_int *period, u_int *ppr_options, role_t role)
2825 {
2826         struct  ahd_transinfo *transinfo;
2827         u_int   maxsync;
2828
2829         if ((ahd_inb(ahd, SBLKCTL) & ENAB40) != 0
2830          && (ahd_inb(ahd, SSTAT2) & EXP_ACTIVE) == 0) {
2831                 maxsync = AHD_SYNCRATE_PACED;
2832         } else {
2833                 maxsync = AHD_SYNCRATE_ULTRA;
2834                 /* Can't do DT related options on an SE bus */
2835                 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
2836         }
2837         /*
2838          * Never allow a value higher than our current goal
2839          * period otherwise we may allow a target initiated
2840          * negotiation to go above the limit as set by the
2841          * user.  In the case of an initiator initiated
2842          * sync negotiation, we limit based on the user
2843          * setting.  This allows the system to still accept
2844          * incoming negotiations even if target initiated
2845          * negotiation is not performed.
2846          */
2847         if (role == ROLE_TARGET)
2848                 transinfo = &tinfo->user;
2849         else 
2850                 transinfo = &tinfo->goal;
2851         *ppr_options &= (transinfo->ppr_options|MSG_EXT_PPR_PCOMP_EN);
2852         if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
2853                 maxsync = MAX(maxsync, AHD_SYNCRATE_ULTRA2);
2854                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2855         }
2856         if (transinfo->period == 0) {
2857                 *period = 0;
2858                 *ppr_options = 0;
2859         } else {
2860                 *period = MAX(*period, transinfo->period);
2861                 ahd_find_syncrate(ahd, period, ppr_options, maxsync);
2862         }
2863 }
2864
2865 /*
2866  * Look up the valid period to SCSIRATE conversion in our table.
2867  * Return the period and offset that should be sent to the target
2868  * if this was the beginning of an SDTR.
2869  */
2870 void
2871 ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
2872                   u_int *ppr_options, u_int maxsync)
2873 {
2874         if (*period < maxsync)
2875                 *period = maxsync;
2876
2877         if ((*ppr_options & MSG_EXT_PPR_DT_REQ) != 0
2878          && *period > AHD_SYNCRATE_MIN_DT)
2879                 *ppr_options &= ~MSG_EXT_PPR_DT_REQ;
2880                 
2881         if (*period > AHD_SYNCRATE_MIN)
2882                 *period = 0;
2883
2884         /* Honor PPR option conformance rules. */
2885         if (*period > AHD_SYNCRATE_PACED)
2886                 *ppr_options &= ~MSG_EXT_PPR_RTI;
2887
2888         if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
2889                 *ppr_options &= (MSG_EXT_PPR_DT_REQ|MSG_EXT_PPR_QAS_REQ);
2890
2891         if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0)
2892                 *ppr_options &= MSG_EXT_PPR_QAS_REQ;
2893
2894         /* Skip all PACED only entries if IU is not available */
2895         if ((*ppr_options & MSG_EXT_PPR_IU_REQ) == 0
2896          && *period < AHD_SYNCRATE_DT)
2897                 *period = AHD_SYNCRATE_DT;
2898
2899         /* Skip all DT only entries if DT is not available */
2900         if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
2901          && *period < AHD_SYNCRATE_ULTRA2)
2902                 *period = AHD_SYNCRATE_ULTRA2;
2903 }
2904
2905 /*
2906  * Truncate the given synchronous offset to a value the
2907  * current adapter type and syncrate are capable of.
2908  */
2909 void
2910 ahd_validate_offset(struct ahd_softc *ahd,
2911                     struct ahd_initiator_tinfo *tinfo,
2912                     u_int period, u_int *offset, int wide,
2913                     role_t role)
2914 {
2915         u_int maxoffset;
2916
2917         /* Limit offset to what we can do */
2918         if (period == 0)
2919                 maxoffset = 0;
2920         else if (period <= AHD_SYNCRATE_PACED) {
2921                 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
2922                         maxoffset = MAX_OFFSET_PACED_BUG;
2923                 else
2924                         maxoffset = MAX_OFFSET_PACED;
2925         } else
2926                 maxoffset = MAX_OFFSET_NON_PACED;
2927         *offset = MIN(*offset, maxoffset);
2928         if (tinfo != NULL) {
2929                 if (role == ROLE_TARGET)
2930                         *offset = MIN(*offset, tinfo->user.offset);
2931                 else
2932                         *offset = MIN(*offset, tinfo->goal.offset);
2933         }
2934 }
2935
2936 /*
2937  * Truncate the given transfer width parameter to a value the
2938  * current adapter type is capable of.
2939  */
2940 void
2941 ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
2942                    u_int *bus_width, role_t role)
2943 {
2944         switch (*bus_width) {
2945         default:
2946                 if (ahd->features & AHD_WIDE) {
2947                         /* Respond Wide */
2948                         *bus_width = MSG_EXT_WDTR_BUS_16_BIT;
2949                         break;
2950                 }
2951                 /* FALLTHROUGH */
2952         case MSG_EXT_WDTR_BUS_8_BIT:
2953                 *bus_width = MSG_EXT_WDTR_BUS_8_BIT;
2954                 break;
2955         }
2956         if (tinfo != NULL) {
2957                 if (role == ROLE_TARGET)
2958                         *bus_width = MIN(tinfo->user.width, *bus_width);
2959                 else
2960                         *bus_width = MIN(tinfo->goal.width, *bus_width);
2961         }
2962 }
2963
2964 /*
2965  * Update the bitmask of targets for which the controller should
2966  * negotiate with at the next convenient oportunity.  This currently
2967  * means the next time we send the initial identify messages for
2968  * a new transaction.
2969  */
2970 int
2971 ahd_update_neg_request(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
2972                        struct ahd_tmode_tstate *tstate,
2973                        struct ahd_initiator_tinfo *tinfo, ahd_neg_type neg_type)
2974 {
2975         u_int auto_negotiate_orig;
2976
2977         auto_negotiate_orig = tstate->auto_negotiate;
2978         if (neg_type == AHD_NEG_ALWAYS) {
2979                 /*
2980                  * Force our "current" settings to be
2981                  * unknown so that unless a bus reset
2982                  * occurs the need to renegotiate is
2983                  * recorded persistently.
2984                  */
2985                 if ((ahd->features & AHD_WIDE) != 0)
2986                         tinfo->curr.width = AHD_WIDTH_UNKNOWN;
2987                 tinfo->curr.period = AHD_PERIOD_UNKNOWN;
2988                 tinfo->curr.offset = AHD_OFFSET_UNKNOWN;
2989         }
2990         if (tinfo->curr.period != tinfo->goal.period
2991          || tinfo->curr.width != tinfo->goal.width
2992          || tinfo->curr.offset != tinfo->goal.offset
2993          || tinfo->curr.ppr_options != tinfo->goal.ppr_options
2994          || (neg_type == AHD_NEG_IF_NON_ASYNC
2995           && (tinfo->goal.offset != 0
2996            || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
2997            || tinfo->goal.ppr_options != 0)))
2998                 tstate->auto_negotiate |= devinfo->target_mask;
2999         else
3000                 tstate->auto_negotiate &= ~devinfo->target_mask;
3001
3002         return (auto_negotiate_orig != tstate->auto_negotiate);
3003 }
3004
3005 /*
3006  * Update the user/goal/curr tables of synchronous negotiation
3007  * parameters as well as, in the case of a current or active update,
3008  * any data structures on the host controller.  In the case of an
3009  * active update, the specified target is currently talking to us on
3010  * the bus, so the transfer parameter update must take effect
3011  * immediately.
3012  */
3013 void
3014 ahd_set_syncrate(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3015                  u_int period, u_int offset, u_int ppr_options,
3016                  u_int type, int paused)
3017 {
3018         struct  ahd_initiator_tinfo *tinfo;
3019         struct  ahd_tmode_tstate *tstate;
3020         u_int   old_period;
3021         u_int   old_offset;
3022         u_int   old_ppr;
3023         int     active;
3024         int     update_needed;
3025
3026         active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
3027         update_needed = 0;
3028
3029         if (period == 0 || offset == 0) {
3030                 period = 0;
3031                 offset = 0;
3032         }
3033
3034         tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3035                                     devinfo->target, &tstate);
3036
3037         if ((type & AHD_TRANS_USER) != 0) {
3038                 tinfo->user.period = period;
3039                 tinfo->user.offset = offset;
3040                 tinfo->user.ppr_options = ppr_options;
3041         }
3042
3043         if ((type & AHD_TRANS_GOAL) != 0) {
3044                 tinfo->goal.period = period;
3045                 tinfo->goal.offset = offset;
3046                 tinfo->goal.ppr_options = ppr_options;
3047         }
3048
3049         old_period = tinfo->curr.period;
3050         old_offset = tinfo->curr.offset;
3051         old_ppr    = tinfo->curr.ppr_options;
3052
3053         if ((type & AHD_TRANS_CUR) != 0
3054          && (old_period != period
3055           || old_offset != offset
3056           || old_ppr != ppr_options)) {
3057
3058                 update_needed++;
3059
3060                 tinfo->curr.period = period;
3061                 tinfo->curr.offset = offset;
3062                 tinfo->curr.ppr_options = ppr_options;
3063
3064                 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3065                                CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
3066                 if (bootverbose) {
3067                         if (offset != 0) {
3068                                 int options;
3069
3070                                 printf("%s: target %d synchronous with "
3071                                        "period = 0x%x, offset = 0x%x",
3072                                        ahd_name(ahd), devinfo->target,
3073                                        period, offset);
3074                                 options = 0;
3075                                 if ((ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
3076                                         printf("(RDSTRM");
3077                                         options++;
3078                                 }
3079                                 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
3080                                         printf("%s", options ? "|DT" : "(DT");
3081                                         options++;
3082                                 }
3083                                 if ((ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
3084                                         printf("%s", options ? "|IU" : "(IU");
3085                                         options++;
3086                                 }
3087                                 if ((ppr_options & MSG_EXT_PPR_RTI) != 0) {
3088                                         printf("%s", options ? "|RTI" : "(RTI");
3089                                         options++;
3090                                 }
3091                                 if ((ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
3092                                         printf("%s", options ? "|QAS" : "(QAS");
3093                                         options++;
3094                                 }
3095                                 if (options != 0)
3096                                         printf(")\n");
3097                                 else
3098                                         printf("\n");
3099                         } else {
3100                                 printf("%s: target %d using "
3101                                        "asynchronous transfers%s\n",
3102                                        ahd_name(ahd), devinfo->target,
3103                                        (ppr_options & MSG_EXT_PPR_QAS_REQ) != 0
3104                                      ?  "(QAS)" : "");
3105                         }
3106                 }
3107         }
3108         /*
3109          * Always refresh the neg-table to handle the case of the
3110          * sequencer setting the ENATNO bit for a MK_MESSAGE request.
3111          * We will always renegotiate in that case if this is a
3112          * packetized request.  Also manage the busfree expected flag
3113          * from this common routine so that we catch changes due to
3114          * WDTR or SDTR messages.
3115          */
3116         if ((type & AHD_TRANS_CUR) != 0) {
3117                 if (!paused)
3118                         ahd_pause(ahd);
3119                 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3120                 if (!paused)
3121                         ahd_unpause(ahd);
3122                 if (ahd->msg_type != MSG_TYPE_NONE) {
3123                         if ((old_ppr & MSG_EXT_PPR_IU_REQ)
3124                          != (ppr_options & MSG_EXT_PPR_IU_REQ)) {
3125 #ifdef AHD_DEBUG
3126                                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3127                                         ahd_print_devinfo(ahd, devinfo);
3128                                         printf("Expecting IU Change busfree\n");
3129                                 }
3130 #endif
3131                                 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
3132                                                |  MSG_FLAG_IU_REQ_CHANGED;
3133                         }
3134                         if ((old_ppr & MSG_EXT_PPR_IU_REQ) != 0) {
3135 #ifdef AHD_DEBUG
3136                                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3137                                         printf("PPR with IU_REQ outstanding\n");
3138 #endif
3139                                 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE;
3140                         }
3141                 }
3142         }
3143
3144         update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
3145                                                 tinfo, AHD_NEG_TO_GOAL);
3146
3147         if (update_needed && active)
3148                 ahd_update_pending_scbs(ahd);
3149 }
3150
3151 /*
3152  * Update the user/goal/curr tables of wide negotiation
3153  * parameters as well as, in the case of a current or active update,
3154  * any data structures on the host controller.  In the case of an
3155  * active update, the specified target is currently talking to us on
3156  * the bus, so the transfer parameter update must take effect
3157  * immediately.
3158  */
3159 void
3160 ahd_set_width(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3161               u_int width, u_int type, int paused)
3162 {
3163         struct  ahd_initiator_tinfo *tinfo;
3164         struct  ahd_tmode_tstate *tstate;
3165         u_int   oldwidth;
3166         int     active;
3167         int     update_needed;
3168
3169         active = (type & AHD_TRANS_ACTIVE) == AHD_TRANS_ACTIVE;
3170         update_needed = 0;
3171         tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3172                                     devinfo->target, &tstate);
3173
3174         if ((type & AHD_TRANS_USER) != 0)
3175                 tinfo->user.width = width;
3176
3177         if ((type & AHD_TRANS_GOAL) != 0)
3178                 tinfo->goal.width = width;
3179
3180         oldwidth = tinfo->curr.width;
3181         if ((type & AHD_TRANS_CUR) != 0 && oldwidth != width) {
3182
3183                 update_needed++;
3184
3185                 tinfo->curr.width = width;
3186                 ahd_send_async(ahd, devinfo->channel, devinfo->target,
3187                                CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
3188                 if (bootverbose) {
3189                         printf("%s: target %d using %dbit transfers\n",
3190                                ahd_name(ahd), devinfo->target,
3191                                8 * (0x01 << width));
3192                 }
3193         }
3194
3195         if ((type & AHD_TRANS_CUR) != 0) {
3196                 if (!paused)
3197                         ahd_pause(ahd);
3198                 ahd_update_neg_table(ahd, devinfo, &tinfo->curr);
3199                 if (!paused)
3200                         ahd_unpause(ahd);
3201         }
3202
3203         update_needed += ahd_update_neg_request(ahd, devinfo, tstate,
3204                                                 tinfo, AHD_NEG_TO_GOAL);
3205         if (update_needed && active)
3206                 ahd_update_pending_scbs(ahd);
3207
3208 }
3209
3210 /*
3211  * Update the current state of tagged queuing for a given target.
3212  */
3213 void
3214 ahd_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3215              ahd_queue_alg alg)
3216 {
3217         ahd_platform_set_tags(ahd, devinfo, alg);
3218         ahd_send_async(ahd, devinfo->channel, devinfo->target,
3219                        devinfo->lun, AC_TRANSFER_NEG, &alg);
3220 }
3221
3222 static void
3223 ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3224                      struct ahd_transinfo *tinfo)
3225 {
3226         ahd_mode_state  saved_modes;
3227         u_int           period;
3228         u_int           ppr_opts;
3229         u_int           con_opts;
3230         u_int           offset;
3231         u_int           saved_negoaddr;
3232         uint8_t         iocell_opts[sizeof(ahd->iocell_opts)];
3233
3234         saved_modes = ahd_save_modes(ahd);
3235         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3236
3237         saved_negoaddr = ahd_inb(ahd, NEGOADDR);
3238         ahd_outb(ahd, NEGOADDR, devinfo->target);
3239         period = tinfo->period;
3240         offset = tinfo->offset;
3241         memcpy(iocell_opts, ahd->iocell_opts, sizeof(ahd->iocell_opts)); 
3242         ppr_opts = tinfo->ppr_options & (MSG_EXT_PPR_QAS_REQ|MSG_EXT_PPR_DT_REQ
3243                                         |MSG_EXT_PPR_IU_REQ|MSG_EXT_PPR_RTI);
3244         con_opts = 0;
3245         if (period == 0)
3246                 period = AHD_SYNCRATE_ASYNC;
3247         if (period == AHD_SYNCRATE_160) {
3248
3249                 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
3250                         /*
3251                          * When the SPI4 spec was finalized, PACE transfers
3252                          * was not made a configurable option in the PPR
3253                          * message.  Instead it is assumed to be enabled for
3254                          * any syncrate faster than 80MHz.  Nevertheless,
3255                          * Harpoon2A4 allows this to be configurable.
3256                          *
3257                          * Harpoon2A4 also assumes at most 2 data bytes per
3258                          * negotiated REQ/ACK offset.  Paced transfers take
3259                          * 4, so we must adjust our offset.
3260                          */
3261                         ppr_opts |= PPROPT_PACE;
3262                         offset *= 2;
3263
3264                         /*
3265                          * Harpoon2A assumed that there would be a
3266                          * fallback rate between 160MHz and 80Mhz,
3267                          * so 7 is used as the period factor rather
3268                          * than 8 for 160MHz.
3269                          */
3270                         period = AHD_SYNCRATE_REVA_160;
3271                 }
3272                 if ((tinfo->ppr_options & MSG_EXT_PPR_PCOMP_EN) == 0)
3273                         iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
3274                             ~AHD_PRECOMP_MASK;
3275         } else {
3276                 /*
3277                  * Precomp should be disabled for non-paced transfers.
3278                  */
3279                 iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK;
3280
3281                 if ((ahd->features & AHD_NEW_IOCELL_OPTS) != 0
3282                  && (ppr_opts & MSG_EXT_PPR_DT_REQ) != 0
3283                  && (ppr_opts & MSG_EXT_PPR_IU_REQ) == 0) {
3284                         /*
3285                          * Slow down our CRC interval to be
3286                          * compatible with non-packetized
3287                          * U160 devices that can't handle a
3288                          * CRC at full speed.
3289                          */
3290                         con_opts |= ENSLOWCRC;
3291                 }
3292
3293                 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0) {
3294                         /*
3295                          * On H2A4, revert to a slower slewrate
3296                          * on non-paced transfers.
3297                          */
3298                         iocell_opts[AHD_PRECOMP_SLEW_INDEX] &=
3299                             ~AHD_SLEWRATE_MASK;
3300                 }
3301         }
3302
3303         ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PRECOMP_SLEW);
3304         ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_PRECOMP_SLEW_INDEX]);
3305         ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_AMPLITUDE);
3306         ahd_outb(ahd, ANNEXDAT, iocell_opts[AHD_AMPLITUDE_INDEX]);
3307
3308         ahd_outb(ahd, NEGPERIOD, period);
3309         ahd_outb(ahd, NEGPPROPTS, ppr_opts);
3310         ahd_outb(ahd, NEGOFFSET, offset);
3311
3312         if (tinfo->width == MSG_EXT_WDTR_BUS_16_BIT)
3313                 con_opts |= WIDEXFER;
3314
3315         /*
3316          * Slow down our CRC interval to be
3317          * compatible with packetized U320 devices
3318          * that can't handle a CRC at full speed
3319          */
3320         if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
3321                 con_opts |= ENSLOWCRC;
3322         }
3323
3324         /*
3325          * During packetized transfers, the target will
3326          * give us the oportunity to send command packets
3327          * without us asserting attention.
3328          */
3329         if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
3330                 con_opts |= ENAUTOATNO;
3331         ahd_outb(ahd, NEGCONOPTS, con_opts);
3332         ahd_outb(ahd, NEGOADDR, saved_negoaddr);
3333         ahd_restore_modes(ahd, saved_modes);
3334 }
3335
3336 /*
3337  * When the transfer settings for a connection change, setup for
3338  * negotiation in pending SCBs to effect the change as quickly as
3339  * possible.  We also cancel any negotiations that are scheduled
3340  * for inflight SCBs that have not been started yet.
3341  */
3342 static void
3343 ahd_update_pending_scbs(struct ahd_softc *ahd)
3344 {
3345         struct          scb *pending_scb;
3346         int             pending_scb_count;
3347         int             paused;
3348         u_int           saved_scbptr;
3349         ahd_mode_state  saved_modes;
3350
3351         /*
3352          * Traverse the pending SCB list and ensure that all of the
3353          * SCBs there have the proper settings.  We can only safely
3354          * clear the negotiation required flag (setting requires the
3355          * execution queue to be modified) and this is only possible
3356          * if we are not already attempting to select out for this
3357          * SCB.  For this reason, all callers only call this routine
3358          * if we are changing the negotiation settings for the currently
3359          * active transaction on the bus.
3360          */
3361         pending_scb_count = 0;
3362         LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
3363                 struct ahd_devinfo devinfo;
3364                 struct ahd_initiator_tinfo *tinfo;
3365                 struct ahd_tmode_tstate *tstate;
3366
3367                 ahd_scb_devinfo(ahd, &devinfo, pending_scb);
3368                 tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
3369                                             devinfo.our_scsiid,
3370                                             devinfo.target, &tstate);
3371                 if ((tstate->auto_negotiate & devinfo.target_mask) == 0
3372                  && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
3373                         pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
3374                         pending_scb->hscb->control &= ~MK_MESSAGE;
3375                 }
3376                 ahd_sync_scb(ahd, pending_scb,
3377                              BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
3378                 pending_scb_count++;
3379         }
3380
3381         if (pending_scb_count == 0)
3382                 return;
3383
3384         if (ahd_is_paused(ahd)) {
3385                 paused = 1;
3386         } else {
3387                 paused = 0;
3388                 ahd_pause(ahd);
3389         }
3390
3391         /*
3392          * Force the sequencer to reinitialize the selection for
3393          * the command at the head of the execution queue if it
3394          * has already been setup.  The negotiation changes may
3395          * effect whether we select-out with ATN.  It is only
3396          * safe to clear ENSELO when the bus is not free and no
3397          * selection is in progres or completed.
3398          */
3399         saved_modes = ahd_save_modes(ahd);
3400         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3401         if ((ahd_inb(ahd, SCSISIGI) & BSYI) != 0
3402          && (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) == 0)
3403                 ahd_outb(ahd, SCSISEQ0, ahd_inb(ahd, SCSISEQ0) & ~ENSELO);
3404         saved_scbptr = ahd_get_scbptr(ahd);
3405         /* Ensure that the hscbs down on the card match the new information */
3406         LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
3407                 u_int   scb_tag;
3408                 u_int   control;
3409
3410                 scb_tag = SCB_GET_TAG(pending_scb);
3411                 ahd_set_scbptr(ahd, scb_tag);
3412                 control = ahd_inb_scbram(ahd, SCB_CONTROL);
3413                 control &= ~MK_MESSAGE;
3414                 control |= pending_scb->hscb->control & MK_MESSAGE;
3415                 ahd_outb(ahd, SCB_CONTROL, control);
3416         }
3417         ahd_set_scbptr(ahd, saved_scbptr);
3418         ahd_restore_modes(ahd, saved_modes);
3419
3420         if (paused == 0)
3421                 ahd_unpause(ahd);
3422 }
3423
3424 /**************************** Pathing Information *****************************/
3425 static void
3426 ahd_fetch_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3427 {
3428         ahd_mode_state  saved_modes;
3429         u_int           saved_scsiid;
3430         role_t          role;
3431         int             our_id;
3432
3433         saved_modes = ahd_save_modes(ahd);
3434         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3435
3436         if (ahd_inb(ahd, SSTAT0) & TARGET)
3437                 role = ROLE_TARGET;
3438         else
3439                 role = ROLE_INITIATOR;
3440
3441         if (role == ROLE_TARGET
3442          && (ahd_inb(ahd, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) {
3443                 /* We were selected, so pull our id from TARGIDIN */
3444                 our_id = ahd_inb(ahd, TARGIDIN) & OID;
3445         } else if (role == ROLE_TARGET)
3446                 our_id = ahd_inb(ahd, TOWNID);
3447         else
3448                 our_id = ahd_inb(ahd, IOWNID);
3449
3450         saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
3451         ahd_compile_devinfo(devinfo,
3452                             our_id,
3453                             SCSIID_TARGET(ahd, saved_scsiid),
3454                             ahd_inb(ahd, SAVED_LUN),
3455                             SCSIID_CHANNEL(ahd, saved_scsiid),
3456                             role);
3457         ahd_restore_modes(ahd, saved_modes);
3458 }
3459
3460 void
3461 ahd_print_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3462 {
3463         printf("%s:%c:%d:%d: ", ahd_name(ahd), 'A',
3464                devinfo->target, devinfo->lun);
3465 }
3466
3467 struct ahd_phase_table_entry*
3468 ahd_lookup_phase_entry(int phase)
3469 {
3470         struct ahd_phase_table_entry *entry;
3471         struct ahd_phase_table_entry *last_entry;
3472
3473         /*
3474          * num_phases doesn't include the default entry which
3475          * will be returned if the phase doesn't match.
3476          */
3477         last_entry = &ahd_phase_table[num_phases];
3478         for (entry = ahd_phase_table; entry < last_entry; entry++) {
3479                 if (phase == entry->phase)
3480                         break;
3481         }
3482         return (entry);
3483 }
3484
3485 void
3486 ahd_compile_devinfo(struct ahd_devinfo *devinfo, u_int our_id, u_int target,
3487                     u_int lun, char channel, role_t role)
3488 {
3489         devinfo->our_scsiid = our_id;
3490         devinfo->target = target;
3491         devinfo->lun = lun;
3492         devinfo->target_offset = target;
3493         devinfo->channel = channel;
3494         devinfo->role = role;
3495         if (channel == 'B')
3496                 devinfo->target_offset += 8;
3497         devinfo->target_mask = (0x01 << devinfo->target_offset);
3498 }
3499
3500 static void
3501 ahd_scb_devinfo(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3502                 struct scb *scb)
3503 {
3504         role_t  role;
3505         int     our_id;
3506
3507         our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
3508         role = ROLE_INITIATOR;
3509         if ((scb->hscb->control & TARGET_SCB) != 0)
3510                 role = ROLE_TARGET;
3511         ahd_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahd, scb),
3512                             SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahd, scb), role);
3513 }
3514
3515
3516 /************************ Message Phase Processing ****************************/
3517 /*
3518  * When an initiator transaction with the MK_MESSAGE flag either reconnects
3519  * or enters the initial message out phase, we are interrupted.  Fill our
3520  * outgoing message buffer with the appropriate message and beging handing
3521  * the message phase(s) manually.
3522  */
3523 static void
3524 ahd_setup_initiator_msgout(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3525                            struct scb *scb)
3526 {
3527         /*
3528          * To facilitate adding multiple messages together,
3529          * each routine should increment the index and len
3530          * variables instead of setting them explicitly.
3531          */
3532         ahd->msgout_index = 0;
3533         ahd->msgout_len = 0;
3534
3535         if (ahd_currently_packetized(ahd))
3536                 ahd->msg_flags |= MSG_FLAG_PACKETIZED;
3537
3538         if (ahd->send_msg_perror
3539          && ahd_inb(ahd, MSG_OUT) == HOST_MSG) {
3540                 ahd->msgout_buf[ahd->msgout_index++] = ahd->send_msg_perror;
3541                 ahd->msgout_len++;
3542                 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3543 #ifdef AHD_DEBUG
3544                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3545                         printf("Setting up for Parity Error delivery\n");
3546 #endif
3547                 return;
3548         } else if (scb == NULL) {
3549                 printf("%s: WARNING. No pending message for "
3550                        "I_T msgin.  Issuing NO-OP\n", ahd_name(ahd));
3551                 ahd->msgout_buf[ahd->msgout_index++] = MSG_NOOP;
3552                 ahd->msgout_len++;
3553                 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3554                 return;
3555         }
3556
3557         if ((scb->flags & SCB_DEVICE_RESET) == 0
3558          && (scb->flags & SCB_PACKETIZED) == 0
3559          && ahd_inb(ahd, MSG_OUT) == MSG_IDENTIFYFLAG) {
3560                 u_int identify_msg;
3561
3562                 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
3563                 if ((scb->hscb->control & DISCENB) != 0)
3564                         identify_msg |= MSG_IDENTIFY_DISCFLAG;
3565                 ahd->msgout_buf[ahd->msgout_index++] = identify_msg;
3566                 ahd->msgout_len++;
3567
3568                 if ((scb->hscb->control & TAG_ENB) != 0) {
3569                         ahd->msgout_buf[ahd->msgout_index++] =
3570                             scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
3571                         ahd->msgout_buf[ahd->msgout_index++] = SCB_GET_TAG(scb);
3572                         ahd->msgout_len += 2;
3573                 }
3574         }
3575
3576         if (scb->flags & SCB_DEVICE_RESET) {
3577                 ahd->msgout_buf[ahd->msgout_index++] = MSG_BUS_DEV_RESET;
3578                 ahd->msgout_len++;
3579                 ahd_print_path(ahd, scb);
3580                 printf("Bus Device Reset Message Sent\n");
3581                 /*
3582                  * Clear our selection hardware in advance of
3583                  * the busfree.  We may have an entry in the waiting
3584                  * Q for this target, and we don't want to go about
3585                  * selecting while we handle the busfree and blow it
3586                  * away.
3587                  */
3588                 ahd_outb(ahd, SCSISEQ0, 0);
3589         } else if ((scb->flags & SCB_ABORT) != 0) {
3590
3591                 if ((scb->hscb->control & TAG_ENB) != 0) {
3592                         ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT_TAG;
3593                 } else {
3594                         ahd->msgout_buf[ahd->msgout_index++] = MSG_ABORT;
3595                 }
3596                 ahd->msgout_len++;
3597                 ahd_print_path(ahd, scb);
3598                 printf("Abort%s Message Sent\n",
3599                        (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
3600                 /*
3601                  * Clear our selection hardware in advance of
3602                  * the busfree.  We may have an entry in the waiting
3603                  * Q for this target, and we don't want to go about
3604                  * selecting while we handle the busfree and blow it
3605                  * away.
3606                  */
3607                 ahd_outb(ahd, SCSISEQ0, 0);
3608         } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
3609                 ahd_build_transfer_msg(ahd, devinfo);
3610                 /*
3611                  * Clear our selection hardware in advance of potential
3612                  * PPR IU status change busfree.  We may have an entry in
3613                  * the waiting Q for this target, and we don't want to go
3614                  * about selecting while we handle the busfree and blow
3615                  * it away.
3616                  */
3617                 ahd_outb(ahd, SCSISEQ0, 0);
3618         } else {
3619                 printf("ahd_intr: AWAITING_MSG for an SCB that "
3620                        "does not have a waiting message\n");
3621                 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
3622                        devinfo->target_mask);
3623                 panic("SCB = %d, SCB Control = %x:%x, MSG_OUT = %x "
3624                       "SCB flags = %x", SCB_GET_TAG(scb), scb->hscb->control,
3625                       ahd_inb_scbram(ahd, SCB_CONTROL), ahd_inb(ahd, MSG_OUT),
3626                       scb->flags);
3627         }
3628
3629         /*
3630          * Clear the MK_MESSAGE flag from the SCB so we aren't
3631          * asked to send this message again.
3632          */
3633         ahd_outb(ahd, SCB_CONTROL,
3634                  ahd_inb_scbram(ahd, SCB_CONTROL) & ~MK_MESSAGE);
3635         scb->hscb->control &= ~MK_MESSAGE;
3636         ahd->msgout_index = 0;
3637         ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3638 }
3639
3640 /*
3641  * Build an appropriate transfer negotiation message for the
3642  * currently active target.
3643  */
3644 static void
3645 ahd_build_transfer_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
3646 {
3647         /*
3648          * We need to initiate transfer negotiations.
3649          * If our current and goal settings are identical,
3650          * we want to renegotiate due to a check condition.
3651          */
3652         struct  ahd_initiator_tinfo *tinfo;
3653         struct  ahd_tmode_tstate *tstate;
3654         int     dowide;
3655         int     dosync;
3656         int     doppr;
3657         u_int   period;
3658         u_int   ppr_options;
3659         u_int   offset;
3660
3661         tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
3662                                     devinfo->target, &tstate);
3663         /*
3664          * Filter our period based on the current connection.
3665          * If we can't perform DT transfers on this segment (not in LVD
3666          * mode for instance), then our decision to issue a PPR message
3667          * may change.
3668          */
3669         period = tinfo->goal.period;
3670         offset = tinfo->goal.offset;
3671         ppr_options = tinfo->goal.ppr_options;
3672         /* Target initiated PPR is not allowed in the SCSI spec */
3673         if (devinfo->role == ROLE_TARGET)
3674                 ppr_options = 0;
3675         ahd_devlimited_syncrate(ahd, tinfo, &period,
3676                                 &ppr_options, devinfo->role);
3677         dowide = tinfo->curr.width != tinfo->goal.width;
3678         dosync = tinfo->curr.offset != offset || tinfo->curr.period != period;
3679         /*
3680          * Only use PPR if we have options that need it, even if the device
3681          * claims to support it.  There might be an expander in the way
3682          * that doesn't.
3683          */
3684         doppr = ppr_options != 0;
3685
3686         if (!dowide && !dosync && !doppr) {
3687                 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
3688                 dosync = tinfo->goal.offset != 0;
3689         }
3690
3691         if (!dowide && !dosync && !doppr) {
3692                 /*
3693                  * Force async with a WDTR message if we have a wide bus,
3694                  * or just issue an SDTR with a 0 offset.
3695                  */
3696                 if ((ahd->features & AHD_WIDE) != 0)
3697                         dowide = 1;
3698                 else
3699                         dosync = 1;
3700
3701                 if (bootverbose) {
3702                         ahd_print_devinfo(ahd, devinfo);
3703                         printf("Ensuring async\n");
3704                 }
3705         }
3706         /* Target initiated PPR is not allowed in the SCSI spec */
3707         if (devinfo->role == ROLE_TARGET)
3708                 doppr = 0;
3709
3710         /*
3711          * Both the PPR message and SDTR message require the
3712          * goal syncrate to be limited to what the target device
3713          * is capable of handling (based on whether an LVD->SE
3714          * expander is on the bus), so combine these two cases.
3715          * Regardless, guarantee that if we are using WDTR and SDTR
3716          * messages that WDTR comes first.
3717          */
3718         if (doppr || (dosync && !dowide)) {
3719
3720                 offset = tinfo->goal.offset;
3721                 ahd_validate_offset(ahd, tinfo, period, &offset,
3722                                     doppr ? tinfo->goal.width
3723                                           : tinfo->curr.width,
3724                                     devinfo->role);
3725                 if (doppr) {
3726                         ahd_construct_ppr(ahd, devinfo, period, offset,
3727                                           tinfo->goal.width, ppr_options);
3728                 } else {
3729                         ahd_construct_sdtr(ahd, devinfo, period, offset);
3730                 }
3731         } else {
3732                 ahd_construct_wdtr(ahd, devinfo, tinfo->goal.width);
3733         }
3734 }
3735
3736 /*
3737  * Build a synchronous negotiation message in our message
3738  * buffer based on the input parameters.
3739  */
3740 static void
3741 ahd_construct_sdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3742                    u_int period, u_int offset)
3743 {
3744         if (offset == 0)
3745                 period = AHD_ASYNC_XFER_PERIOD;
3746         ahd->msgout_index += spi_populate_sync_msg(
3747                         ahd->msgout_buf + ahd->msgout_index, period, offset);
3748         ahd->msgout_len += 5;
3749         if (bootverbose) {
3750                 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
3751                        ahd_name(ahd), devinfo->channel, devinfo->target,
3752                        devinfo->lun, period, offset);
3753         }
3754 }
3755
3756 /*
3757  * Build a wide negotiateion message in our message
3758  * buffer based on the input parameters.
3759  */
3760 static void
3761 ahd_construct_wdtr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3762                    u_int bus_width)
3763 {
3764         ahd->msgout_index += spi_populate_width_msg(
3765                         ahd->msgout_buf + ahd->msgout_index, bus_width);
3766         ahd->msgout_len += 4;
3767         if (bootverbose) {
3768                 printf("(%s:%c:%d:%d): Sending WDTR %x\n",
3769                        ahd_name(ahd), devinfo->channel, devinfo->target,
3770                        devinfo->lun, bus_width);
3771         }
3772 }
3773
3774 /*
3775  * Build a parallel protocol request message in our message
3776  * buffer based on the input parameters.
3777  */
3778 static void
3779 ahd_construct_ppr(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
3780                   u_int period, u_int offset, u_int bus_width,
3781                   u_int ppr_options)
3782 {
3783         /*
3784          * Always request precompensation from
3785          * the other target if we are running
3786          * at paced syncrates.
3787          */
3788         if (period <= AHD_SYNCRATE_PACED)
3789                 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
3790         if (offset == 0)
3791                 period = AHD_ASYNC_XFER_PERIOD;
3792         ahd->msgout_index += spi_populate_ppr_msg(
3793                         ahd->msgout_buf + ahd->msgout_index, period, offset,
3794                         bus_width, ppr_options);
3795         ahd->msgout_len += 8;
3796         if (bootverbose) {
3797                 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
3798                        "offset %x, ppr_options %x\n", ahd_name(ahd),
3799                        devinfo->channel, devinfo->target, devinfo->lun,
3800                        bus_width, period, offset, ppr_options);
3801         }
3802 }
3803
3804 /*
3805  * Clear any active message state.
3806  */
3807 static void
3808 ahd_clear_msg_state(struct ahd_softc *ahd)
3809 {
3810         ahd_mode_state saved_modes;
3811
3812         saved_modes = ahd_save_modes(ahd);
3813         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
3814         ahd->send_msg_perror = 0;
3815         ahd->msg_flags = MSG_FLAG_NONE;
3816         ahd->msgout_len = 0;
3817         ahd->msgin_index = 0;
3818         ahd->msg_type = MSG_TYPE_NONE;
3819         if ((ahd_inb(ahd, SCSISIGO) & ATNO) != 0) {
3820                 /*
3821                  * The target didn't care to respond to our
3822                  * message request, so clear ATN.
3823                  */
3824                 ahd_outb(ahd, CLRSINT1, CLRATNO);
3825         }
3826         ahd_outb(ahd, MSG_OUT, MSG_NOOP);
3827         ahd_outb(ahd, SEQ_FLAGS2,
3828                  ahd_inb(ahd, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
3829         ahd_restore_modes(ahd, saved_modes);
3830 }
3831
3832 /*
3833  * Manual message loop handler.
3834  */
3835 static void
3836 ahd_handle_message_phase(struct ahd_softc *ahd)
3837
3838         struct  ahd_devinfo devinfo;
3839         u_int   bus_phase;
3840         int     end_session;
3841
3842         ahd_fetch_devinfo(ahd, &devinfo);
3843         end_session = FALSE;
3844         bus_phase = ahd_inb(ahd, LASTPHASE);
3845
3846         if ((ahd_inb(ahd, LQISTAT2) & LQIPHASE_OUTPKT) != 0) {
3847                 printf("LQIRETRY for LQIPHASE_OUTPKT\n");
3848                 ahd_outb(ahd, LQCTL2, LQIRETRY);
3849         }
3850 reswitch:
3851         switch (ahd->msg_type) {
3852         case MSG_TYPE_INITIATOR_MSGOUT:
3853         {
3854                 int lastbyte;
3855                 int phasemis;
3856                 int msgdone;
3857
3858                 if (ahd->msgout_len == 0 && ahd->send_msg_perror == 0)
3859                         panic("HOST_MSG_LOOP interrupt with no active message");
3860
3861 #ifdef AHD_DEBUG
3862                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3863                         ahd_print_devinfo(ahd, &devinfo);
3864                         printf("INITIATOR_MSG_OUT");
3865                 }
3866 #endif
3867                 phasemis = bus_phase != P_MESGOUT;
3868                 if (phasemis) {
3869 #ifdef AHD_DEBUG
3870                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3871                                 printf(" PHASEMIS %s\n",
3872                                        ahd_lookup_phase_entry(bus_phase)
3873                                                              ->phasemsg);
3874                         }
3875 #endif
3876                         if (bus_phase == P_MESGIN) {
3877                                 /*
3878                                  * Change gears and see if
3879                                  * this messages is of interest to
3880                                  * us or should be passed back to
3881                                  * the sequencer.
3882                                  */
3883                                 ahd_outb(ahd, CLRSINT1, CLRATNO);
3884                                 ahd->send_msg_perror = 0;
3885                                 ahd->msg_type = MSG_TYPE_INITIATOR_MSGIN;
3886                                 ahd->msgin_index = 0;
3887                                 goto reswitch;
3888                         }
3889                         end_session = TRUE;
3890                         break;
3891                 }
3892
3893                 if (ahd->send_msg_perror) {
3894                         ahd_outb(ahd, CLRSINT1, CLRATNO);
3895                         ahd_outb(ahd, CLRSINT1, CLRREQINIT);
3896 #ifdef AHD_DEBUG
3897                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3898                                 printf(" byte 0x%x\n", ahd->send_msg_perror);
3899 #endif
3900                         /*
3901                          * If we are notifying the target of a CRC error
3902                          * during packetized operations, the target is
3903                          * within its rights to acknowledge our message
3904                          * with a busfree.
3905                          */
3906                         if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0
3907                          && ahd->send_msg_perror == MSG_INITIATOR_DET_ERR)
3908                                 ahd->msg_flags |= MSG_FLAG_EXPECT_IDE_BUSFREE;
3909
3910                         ahd_outb(ahd, RETURN_2, ahd->send_msg_perror);
3911                         ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
3912                         break;
3913                 }
3914
3915                 msgdone = ahd->msgout_index == ahd->msgout_len;
3916                 if (msgdone) {
3917                         /*
3918                          * The target has requested a retry.
3919                          * Re-assert ATN, reset our message index to
3920                          * 0, and try again.
3921                          */
3922                         ahd->msgout_index = 0;
3923                         ahd_assert_atn(ahd);
3924                 }
3925
3926                 lastbyte = ahd->msgout_index == (ahd->msgout_len - 1);
3927                 if (lastbyte) {
3928                         /* Last byte is signified by dropping ATN */
3929                         ahd_outb(ahd, CLRSINT1, CLRATNO);
3930                 }
3931
3932                 /*
3933                  * Clear our interrupt status and present
3934                  * the next byte on the bus.
3935                  */
3936                 ahd_outb(ahd, CLRSINT1, CLRREQINIT);
3937 #ifdef AHD_DEBUG
3938                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3939                         printf(" byte 0x%x\n",
3940                                ahd->msgout_buf[ahd->msgout_index]);
3941 #endif
3942                 ahd_outb(ahd, RETURN_2, ahd->msgout_buf[ahd->msgout_index++]);
3943                 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_WRITE);
3944                 break;
3945         }
3946         case MSG_TYPE_INITIATOR_MSGIN:
3947         {
3948                 int phasemis;
3949                 int message_done;
3950
3951 #ifdef AHD_DEBUG
3952                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3953                         ahd_print_devinfo(ahd, &devinfo);
3954                         printf("INITIATOR_MSG_IN");
3955                 }
3956 #endif
3957                 phasemis = bus_phase != P_MESGIN;
3958                 if (phasemis) {
3959 #ifdef AHD_DEBUG
3960                         if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
3961                                 printf(" PHASEMIS %s\n",
3962                                        ahd_lookup_phase_entry(bus_phase)
3963                                                              ->phasemsg);
3964                         }
3965 #endif
3966                         ahd->msgin_index = 0;
3967                         if (bus_phase == P_MESGOUT
3968                          && (ahd->send_msg_perror != 0
3969                           || (ahd->msgout_len != 0
3970                            && ahd->msgout_index == 0))) {
3971                                 ahd->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
3972                                 goto reswitch;
3973                         }
3974                         end_session = TRUE;
3975                         break;
3976                 }
3977
3978                 /* Pull the byte in without acking it */
3979                 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIBUS);
3980 #ifdef AHD_DEBUG
3981                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
3982                         printf(" byte 0x%x\n",
3983                                ahd->msgin_buf[ahd->msgin_index]);
3984 #endif
3985
3986                 message_done = ahd_parse_msg(ahd, &devinfo);
3987
3988                 if (message_done) {
3989                         /*
3990                          * Clear our incoming message buffer in case there
3991                          * is another message following this one.
3992                          */
3993                         ahd->msgin_index = 0;
3994
3995                         /*
3996                          * If this message illicited a response,
3997                          * assert ATN so the target takes us to the
3998                          * message out phase.
3999                          */
4000                         if (ahd->msgout_len != 0) {
4001 #ifdef AHD_DEBUG
4002                                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0) {
4003                                         ahd_print_devinfo(ahd, &devinfo);
4004                                         printf("Asserting ATN for response\n");
4005                                 }
4006 #endif
4007                                 ahd_assert_atn(ahd);
4008                         }
4009                 } else 
4010                         ahd->msgin_index++;
4011
4012                 if (message_done == MSGLOOP_TERMINATED) {
4013                         end_session = TRUE;
4014                 } else {
4015                         /* Ack the byte */
4016                         ahd_outb(ahd, CLRSINT1, CLRREQINIT);
4017                         ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_READ);
4018                 }
4019                 break;
4020         }
4021         case MSG_TYPE_TARGET_MSGIN:
4022         {
4023                 int msgdone;
4024                 int msgout_request;
4025
4026                 /*
4027                  * By default, the message loop will continue.
4028                  */
4029                 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4030
4031                 if (ahd->msgout_len == 0)
4032                         panic("Target MSGIN with no active message");
4033
4034                 /*
4035                  * If we interrupted a mesgout session, the initiator
4036                  * will not know this until our first REQ.  So, we
4037                  * only honor mesgout requests after we've sent our
4038                  * first byte.
4039                  */
4040                 if ((ahd_inb(ahd, SCSISIGI) & ATNI) != 0
4041                  && ahd->msgout_index > 0)
4042                         msgout_request = TRUE;
4043                 else
4044                         msgout_request = FALSE;
4045
4046                 if (msgout_request) {
4047
4048                         /*
4049                          * Change gears and see if
4050                          * this messages is of interest to
4051                          * us or should be passed back to
4052                          * the sequencer.
4053                          */
4054                         ahd->msg_type = MSG_TYPE_TARGET_MSGOUT;
4055                         ahd_outb(ahd, SCSISIGO, P_MESGOUT | BSYO);
4056                         ahd->msgin_index = 0;
4057                         /* Dummy read to REQ for first byte */
4058                         ahd_inb(ahd, SCSIDAT);
4059                         ahd_outb(ahd, SXFRCTL0,
4060                                  ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4061                         break;
4062                 }
4063
4064                 msgdone = ahd->msgout_index == ahd->msgout_len;
4065                 if (msgdone) {
4066                         ahd_outb(ahd, SXFRCTL0,
4067                                  ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4068                         end_session = TRUE;
4069                         break;
4070                 }
4071
4072                 /*
4073                  * Present the next byte on the bus.
4074                  */
4075                 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4076                 ahd_outb(ahd, SCSIDAT, ahd->msgout_buf[ahd->msgout_index++]);
4077                 break;
4078         }
4079         case MSG_TYPE_TARGET_MSGOUT:
4080         {
4081                 int lastbyte;
4082                 int msgdone;
4083
4084                 /*
4085                  * By default, the message loop will continue.
4086                  */
4087                 ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
4088
4089                 /*
4090                  * The initiator signals that this is
4091                  * the last byte by dropping ATN.
4092                  */
4093                 lastbyte = (ahd_inb(ahd, SCSISIGI) & ATNI) == 0;
4094
4095                 /*
4096                  * Read the latched byte, but turn off SPIOEN first
4097                  * so that we don't inadvertently cause a REQ for the
4098                  * next byte.
4099                  */
4100                 ahd_outb(ahd, SXFRCTL0, ahd_inb(ahd, SXFRCTL0) & ~SPIOEN);
4101                 ahd->msgin_buf[ahd->msgin_index] = ahd_inb(ahd, SCSIDAT);
4102                 msgdone = ahd_parse_msg(ahd, &devinfo);
4103                 if (msgdone == MSGLOOP_TERMINATED) {
4104                         /*
4105                          * The message is *really* done in that it caused
4106                          * us to go to bus free.  The sequencer has already
4107                          * been reset at this point, so pull the ejection
4108                          * handle.
4109                          */
4110                         return;
4111                 }
4112                 
4113                 ahd->msgin_index++;
4114
4115                 /*
4116                  * XXX Read spec about initiator dropping ATN too soon
4117                  *     and use msgdone to detect it.
4118                  */
4119                 if (msgdone == MSGLOOP_MSGCOMPLETE) {
4120                         ahd->msgin_index = 0;
4121
4122                         /*
4123                          * If this message illicited a response, transition
4124                          * to the Message in phase and send it.
4125                          */
4126                         if (ahd->msgout_len != 0) {
4127                                 ahd_outb(ahd, SCSISIGO, P_MESGIN | BSYO);
4128                                 ahd_outb(ahd, SXFRCTL0,
4129                                          ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4130                                 ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
4131                                 ahd->msgin_index = 0;
4132                                 break;
4133                         }
4134                 }
4135
4136                 if (lastbyte)
4137                         end_session = TRUE;
4138                 else {
4139                         /* Ask for the next byte. */
4140                         ahd_outb(ahd, SXFRCTL0,
4141                                  ahd_inb(ahd, SXFRCTL0) | SPIOEN);
4142                 }
4143
4144                 break;
4145         }
4146         default:
4147                 panic("Unknown REQINIT message type");
4148         }
4149
4150         if (end_session) {
4151                 if ((ahd->msg_flags & MSG_FLAG_PACKETIZED) != 0) {
4152                         printf("%s: Returning to Idle Loop\n",
4153                                ahd_name(ahd));
4154                         ahd_clear_msg_state(ahd);
4155
4156                         /*
4157                          * Perform the equivalent of a clear_target_state.
4158                          */
4159                         ahd_outb(ahd, LASTPHASE, P_BUSFREE);
4160                         ahd_outb(ahd, SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT);
4161                         ahd_outb(ahd, SEQCTL0, FASTMODE|SEQRESET);
4162                 } else {
4163                         ahd_clear_msg_state(ahd);
4164                         ahd_outb(ahd, RETURN_1, EXIT_MSG_LOOP);
4165                 }
4166         }
4167 }
4168
4169 /*
4170  * See if we sent a particular extended message to the target.
4171  * If "full" is true, return true only if the target saw the full
4172  * message.  If "full" is false, return true if the target saw at
4173  * least the first byte of the message.
4174  */
4175 static int
4176 ahd_sent_msg(struct ahd_softc *ahd, ahd_msgtype type, u_int msgval, int full)
4177 {
4178         int found;
4179         u_int index;
4180
4181         found = FALSE;
4182         index = 0;
4183
4184         while (index < ahd->msgout_len) {
4185                 if (ahd->msgout_buf[index] == MSG_EXTENDED) {
4186                         u_int end_index;
4187
4188                         end_index = index + 1 + ahd->msgout_buf[index + 1];
4189                         if (ahd->msgout_buf[index+2] == msgval
4190                          && type == AHDMSG_EXT) {
4191
4192                                 if (full) {
4193                                         if (ahd->msgout_index > end_index)
4194                                                 found = TRUE;
4195                                 } else if (ahd->msgout_index > index)
4196                                         found = TRUE;
4197                         }
4198                         index = end_index;
4199                 } else if (ahd->msgout_buf[index] >= MSG_SIMPLE_TASK
4200                         && ahd->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
4201
4202                         /* Skip tag type and tag id or residue param*/
4203                         index += 2;
4204                 } else {
4205                         /* Single byte message */
4206                         if (type == AHDMSG_1B
4207                          && ahd->msgout_index > index
4208                          && (ahd->msgout_buf[index] == msgval
4209                           || ((ahd->msgout_buf[index] & MSG_IDENTIFYFLAG) != 0
4210                            && msgval == MSG_IDENTIFYFLAG)))
4211                                 found = TRUE;
4212                         index++;
4213                 }
4214
4215                 if (found)
4216                         break;
4217         }
4218         return (found);
4219 }
4220
4221 /*
4222  * Wait for a complete incoming message, parse it, and respond accordingly.
4223  */
4224 static int
4225 ahd_parse_msg(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4226 {
4227         struct  ahd_initiator_tinfo *tinfo;
4228         struct  ahd_tmode_tstate *tstate;
4229         int     reject;
4230         int     done;
4231         int     response;
4232
4233         done = MSGLOOP_IN_PROG;
4234         response = FALSE;
4235         reject = FALSE;
4236         tinfo = ahd_fetch_transinfo(ahd, devinfo->channel, devinfo->our_scsiid,
4237                                     devinfo->target, &tstate);
4238
4239         /*
4240          * Parse as much of the message as is available,
4241          * rejecting it if we don't support it.  When
4242          * the entire message is available and has been
4243          * handled, return MSGLOOP_MSGCOMPLETE, indicating
4244          * that we have parsed an entire message.
4245          *
4246          * In the case of extended messages, we accept the length
4247          * byte outright and perform more checking once we know the
4248          * extended message type.
4249          */
4250         switch (ahd->msgin_buf[0]) {
4251         case MSG_DISCONNECT:
4252         case MSG_SAVEDATAPOINTER:
4253         case MSG_CMDCOMPLETE:
4254         case MSG_RESTOREPOINTERS:
4255         case MSG_IGN_WIDE_RESIDUE:
4256                 /*
4257                  * End our message loop as these are messages
4258                  * the sequencer handles on its own.
4259                  */
4260                 done = MSGLOOP_TERMINATED;
4261                 break;
4262         case MSG_MESSAGE_REJECT:
4263                 response = ahd_handle_msg_reject(ahd, devinfo);
4264                 /* FALLTHROUGH */
4265         case MSG_NOOP:
4266                 done = MSGLOOP_MSGCOMPLETE;
4267                 break;
4268         case MSG_EXTENDED:
4269         {
4270                 /* Wait for enough of the message to begin validation */
4271                 if (ahd->msgin_index < 2)
4272                         break;
4273                 switch (ahd->msgin_buf[2]) {
4274                 case MSG_EXT_SDTR:
4275                 {
4276                         u_int    period;
4277                         u_int    ppr_options;
4278                         u_int    offset;
4279                         u_int    saved_offset;
4280                         
4281                         if (ahd->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
4282                                 reject = TRUE;
4283                                 break;
4284                         }
4285
4286                         /*
4287                          * Wait until we have both args before validating
4288                          * and acting on this message.
4289                          *
4290                          * Add one to MSG_EXT_SDTR_LEN to account for
4291                          * the extended message preamble.
4292                          */
4293                         if (ahd->msgin_index < (MSG_EXT_SDTR_LEN + 1))
4294                                 break;
4295
4296                         period = ahd->msgin_buf[3];
4297                         ppr_options = 0;
4298                         saved_offset = offset = ahd->msgin_buf[4];
4299                         ahd_devlimited_syncrate(ahd, tinfo, &period,
4300                                                 &ppr_options, devinfo->role);
4301                         ahd_validate_offset(ahd, tinfo, period, &offset,
4302                                             tinfo->curr.width, devinfo->role);
4303                         if (bootverbose) {
4304                                 printf("(%s:%c:%d:%d): Received "
4305                                        "SDTR period %x, offset %x\n\t"
4306                                        "Filtered to period %x, offset %x\n",
4307                                        ahd_name(ahd), devinfo->channel,
4308                                        devinfo->target, devinfo->lun,
4309                                        ahd->msgin_buf[3], saved_offset,
4310                                        period, offset);
4311                         }
4312                         ahd_set_syncrate(ahd, devinfo, period,
4313                                          offset, ppr_options,
4314                                          AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4315                                          /*paused*/TRUE);
4316
4317                         /*
4318                          * See if we initiated Sync Negotiation
4319                          * and didn't have to fall down to async
4320                          * transfers.
4321                          */
4322                         if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, TRUE)) {
4323                                 /* We started it */
4324                                 if (saved_offset != offset) {
4325                                         /* Went too low - force async */
4326                                         reject = TRUE;
4327                                 }
4328                         } else {
4329                                 /*
4330                                  * Send our own SDTR in reply
4331                                  */
4332                                 if (bootverbose
4333                                  && devinfo->role == ROLE_INITIATOR) {
4334                                         printf("(%s:%c:%d:%d): Target "
4335                                                "Initiated SDTR\n",
4336                                                ahd_name(ahd), devinfo->channel,
4337                                                devinfo->target, devinfo->lun);
4338                                 }
4339                                 ahd->msgout_index = 0;
4340                                 ahd->msgout_len = 0;
4341                                 ahd_construct_sdtr(ahd, devinfo,
4342                                                    period, offset);
4343                                 ahd->msgout_index = 0;
4344                                 response = TRUE;
4345                         }
4346                         done = MSGLOOP_MSGCOMPLETE;
4347                         break;
4348                 }
4349                 case MSG_EXT_WDTR:
4350                 {
4351                         u_int bus_width;
4352                         u_int saved_width;
4353                         u_int sending_reply;
4354
4355                         sending_reply = FALSE;
4356                         if (ahd->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
4357                                 reject = TRUE;
4358                                 break;
4359                         }
4360
4361                         /*
4362                          * Wait until we have our arg before validating
4363                          * and acting on this message.
4364                          *
4365                          * Add one to MSG_EXT_WDTR_LEN to account for
4366                          * the extended message preamble.
4367                          */
4368                         if (ahd->msgin_index < (MSG_EXT_WDTR_LEN + 1))
4369                                 break;
4370
4371                         bus_width = ahd->msgin_buf[3];
4372                         saved_width = bus_width;
4373                         ahd_validate_width(ahd, tinfo, &bus_width,
4374                                            devinfo->role);
4375                         if (bootverbose) {
4376                                 printf("(%s:%c:%d:%d): Received WDTR "
4377                                        "%x filtered to %x\n",
4378                                        ahd_name(ahd), devinfo->channel,
4379                                        devinfo->target, devinfo->lun,
4380                                        saved_width, bus_width);
4381                         }
4382
4383                         if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, TRUE)) {
4384                                 /*
4385                                  * Don't send a WDTR back to the
4386                                  * target, since we asked first.
4387                                  * If the width went higher than our
4388                                  * request, reject it.
4389                                  */
4390                                 if (saved_width > bus_width) {
4391                                         reject = TRUE;
4392                                         printf("(%s:%c:%d:%d): requested %dBit "
4393                                                "transfers.  Rejecting...\n",
4394                                                ahd_name(ahd), devinfo->channel,
4395                                                devinfo->target, devinfo->lun,
4396                                                8 * (0x01 << bus_width));
4397                                         bus_width = 0;
4398                                 }
4399                         } else {
4400                                 /*
4401                                  * Send our own WDTR in reply
4402                                  */
4403                                 if (bootverbose
4404                                  && devinfo->role == ROLE_INITIATOR) {
4405                                         printf("(%s:%c:%d:%d): Target "
4406                                                "Initiated WDTR\n",
4407                                                ahd_name(ahd), devinfo->channel,
4408                                                devinfo->target, devinfo->lun);
4409                                 }
4410                                 ahd->msgout_index = 0;
4411                                 ahd->msgout_len = 0;
4412                                 ahd_construct_wdtr(ahd, devinfo, bus_width);
4413                                 ahd->msgout_index = 0;
4414                                 response = TRUE;
4415                                 sending_reply = TRUE;
4416                         }
4417                         /*
4418                          * After a wide message, we are async, but
4419                          * some devices don't seem to honor this portion
4420                          * of the spec.  Force a renegotiation of the
4421                          * sync component of our transfer agreement even
4422                          * if our goal is async.  By updating our width
4423                          * after forcing the negotiation, we avoid
4424                          * renegotiating for width.
4425                          */
4426                         ahd_update_neg_request(ahd, devinfo, tstate,
4427                                                tinfo, AHD_NEG_ALWAYS);
4428                         ahd_set_width(ahd, devinfo, bus_width,
4429                                       AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4430                                       /*paused*/TRUE);
4431                         if (sending_reply == FALSE && reject == FALSE) {
4432
4433                                 /*
4434                                  * We will always have an SDTR to send.
4435                                  */
4436                                 ahd->msgout_index = 0;
4437                                 ahd->msgout_len = 0;
4438                                 ahd_build_transfer_msg(ahd, devinfo);
4439                                 ahd->msgout_index = 0;
4440                                 response = TRUE;
4441                         }
4442                         done = MSGLOOP_MSGCOMPLETE;
4443                         break;
4444                 }
4445                 case MSG_EXT_PPR:
4446                 {
4447                         u_int   period;
4448                         u_int   offset;
4449                         u_int   bus_width;
4450                         u_int   ppr_options;
4451                         u_int   saved_width;
4452                         u_int   saved_offset;
4453                         u_int   saved_ppr_options;
4454
4455                         if (ahd->msgin_buf[1] != MSG_EXT_PPR_LEN) {
4456                                 reject = TRUE;
4457                                 break;
4458                         }
4459
4460                         /*
4461                          * Wait until we have all args before validating
4462                          * and acting on this message.
4463                          *
4464                          * Add one to MSG_EXT_PPR_LEN to account for
4465                          * the extended message preamble.
4466                          */
4467                         if (ahd->msgin_index < (MSG_EXT_PPR_LEN + 1))
4468                                 break;
4469
4470                         period = ahd->msgin_buf[3];
4471                         offset = ahd->msgin_buf[5];
4472                         bus_width = ahd->msgin_buf[6];
4473                         saved_width = bus_width;
4474                         ppr_options = ahd->msgin_buf[7];
4475                         /*
4476                          * According to the spec, a DT only
4477                          * period factor with no DT option
4478                          * set implies async.
4479                          */
4480                         if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
4481                          && period <= 9)
4482                                 offset = 0;
4483                         saved_ppr_options = ppr_options;
4484                         saved_offset = offset;
4485
4486                         /*
4487                          * Transfer options are only available if we
4488                          * are negotiating wide.
4489                          */
4490                         if (bus_width == 0)
4491                                 ppr_options &= MSG_EXT_PPR_QAS_REQ;
4492
4493                         ahd_validate_width(ahd, tinfo, &bus_width,
4494                                            devinfo->role);
4495                         ahd_devlimited_syncrate(ahd, tinfo, &period,
4496                                                 &ppr_options, devinfo->role);
4497                         ahd_validate_offset(ahd, tinfo, period, &offset,
4498                                             bus_width, devinfo->role);
4499
4500                         if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, TRUE)) {
4501                                 /*
4502                                  * If we are unable to do any of the
4503                                  * requested options (we went too low),
4504                                  * then we'll have to reject the message.
4505                                  */
4506                                 if (saved_width > bus_width
4507                                  || saved_offset != offset
4508                                  || saved_ppr_options != ppr_options) {
4509                                         reject = TRUE;
4510                                         period = 0;
4511                                         offset = 0;
4512                                         bus_width = 0;
4513                                         ppr_options = 0;
4514                                 }
4515                         } else {
4516                                 if (devinfo->role != ROLE_TARGET)
4517                                         printf("(%s:%c:%d:%d): Target "
4518                                                "Initiated PPR\n",
4519                                                ahd_name(ahd), devinfo->channel,
4520                                                devinfo->target, devinfo->lun);
4521                                 else
4522                                         printf("(%s:%c:%d:%d): Initiator "
4523                                                "Initiated PPR\n",
4524                                                ahd_name(ahd), devinfo->channel,
4525                                                devinfo->target, devinfo->lun);
4526                                 ahd->msgout_index = 0;
4527                                 ahd->msgout_len = 0;
4528                                 ahd_construct_ppr(ahd, devinfo, period, offset,
4529                                                   bus_width, ppr_options);
4530                                 ahd->msgout_index = 0;
4531                                 response = TRUE;
4532                         }
4533                         if (bootverbose) {
4534                                 printf("(%s:%c:%d:%d): Received PPR width %x, "
4535                                        "period %x, offset %x,options %x\n"
4536                                        "\tFiltered to width %x, period %x, "
4537                                        "offset %x, options %x\n",
4538                                        ahd_name(ahd), devinfo->channel,
4539                                        devinfo->target, devinfo->lun,
4540                                        saved_width, ahd->msgin_buf[3],
4541                                        saved_offset, saved_ppr_options,
4542                                        bus_width, period, offset, ppr_options);
4543                         }
4544                         ahd_set_width(ahd, devinfo, bus_width,
4545                                       AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4546                                       /*paused*/TRUE);
4547                         ahd_set_syncrate(ahd, devinfo, period,
4548                                          offset, ppr_options,
4549                                          AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4550                                          /*paused*/TRUE);
4551
4552                         done = MSGLOOP_MSGCOMPLETE;
4553                         break;
4554                 }
4555                 default:
4556                         /* Unknown extended message.  Reject it. */
4557                         reject = TRUE;
4558                         break;
4559                 }
4560                 break;
4561         }
4562 #ifdef AHD_TARGET_MODE
4563         case MSG_BUS_DEV_RESET:
4564                 ahd_handle_devreset(ahd, devinfo, CAM_LUN_WILDCARD,
4565                                     CAM_BDR_SENT,
4566                                     "Bus Device Reset Received",
4567                                     /*verbose_level*/0);
4568                 ahd_restart(ahd);
4569                 done = MSGLOOP_TERMINATED;
4570                 break;
4571         case MSG_ABORT_TAG:
4572         case MSG_ABORT:
4573         case MSG_CLEAR_QUEUE:
4574         {
4575                 int tag;
4576
4577                 /* Target mode messages */
4578                 if (devinfo->role != ROLE_TARGET) {
4579                         reject = TRUE;
4580                         break;
4581                 }
4582                 tag = SCB_LIST_NULL;
4583                 if (ahd->msgin_buf[0] == MSG_ABORT_TAG)
4584                         tag = ahd_inb(ahd, INITIATOR_TAG);
4585                 ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
4586                                devinfo->lun, tag, ROLE_TARGET,
4587                                CAM_REQ_ABORTED);
4588
4589                 tstate = ahd->enabled_targets[devinfo->our_scsiid];
4590                 if (tstate != NULL) {
4591                         struct ahd_tmode_lstate* lstate;
4592
4593                         lstate = tstate->enabled_luns[devinfo->lun];
4594                         if (lstate != NULL) {
4595                                 ahd_queue_lstate_event(ahd, lstate,
4596                                                        devinfo->our_scsiid,
4597                                                        ahd->msgin_buf[0],
4598                                                        /*arg*/tag);
4599                                 ahd_send_lstate_events(ahd, lstate);
4600                         }
4601                 }
4602                 ahd_restart(ahd);
4603                 done = MSGLOOP_TERMINATED;
4604                 break;
4605         }
4606 #endif
4607         case MSG_QAS_REQUEST:
4608 #ifdef AHD_DEBUG
4609                 if ((ahd_debug & AHD_SHOW_MESSAGES) != 0)
4610                         printf("%s: QAS request.  SCSISIGI == 0x%x\n",
4611                                ahd_name(ahd), ahd_inb(ahd, SCSISIGI));
4612 #endif
4613                 ahd->msg_flags |= MSG_FLAG_EXPECT_QASREJ_BUSFREE;
4614                 /* FALLTHROUGH */
4615         case MSG_TERM_IO_PROC:
4616         default:
4617                 reject = TRUE;
4618                 break;
4619         }
4620
4621         if (reject) {
4622                 /*
4623                  * Setup to reject the message.
4624                  */
4625                 ahd->msgout_index = 0;
4626                 ahd->msgout_len = 1;
4627                 ahd->msgout_buf[0] = MSG_MESSAGE_REJECT;
4628                 done = MSGLOOP_MSGCOMPLETE;
4629                 response = TRUE;
4630         }
4631
4632         if (done != MSGLOOP_IN_PROG && !response)
4633                 /* Clear the outgoing message buffer */
4634                 ahd->msgout_len = 0;
4635
4636         return (done);
4637 }
4638
4639 /*
4640  * Process a message reject message.
4641  */
4642 static int
4643 ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4644 {
4645         /*
4646          * What we care about here is if we had an
4647          * outstanding SDTR or WDTR message for this
4648          * target.  If we did, this is a signal that
4649          * the target is refusing negotiation.
4650          */
4651         struct scb *scb;
4652         struct ahd_initiator_tinfo *tinfo;
4653         struct ahd_tmode_tstate *tstate;
4654         u_int scb_index;
4655         u_int last_msg;
4656         int   response = 0;
4657
4658         scb_index = ahd_get_scbptr(ahd);
4659         scb = ahd_lookup_scb(ahd, scb_index);
4660         tinfo = ahd_fetch_transinfo(ahd, devinfo->channel,
4661                                     devinfo->our_scsiid,
4662                                     devinfo->target, &tstate);
4663         /* Might be necessary */
4664         last_msg = ahd_inb(ahd, LAST_MSG);
4665
4666         if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
4667                 if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_PPR, /*full*/TRUE)
4668                  && tinfo->goal.period <= AHD_SYNCRATE_PACED) {
4669                         /*
4670                          * Target may not like our SPI-4 PPR Options.
4671                          * Attempt to negotiate 80MHz which will turn
4672                          * off these options.
4673                          */
4674                         if (bootverbose) {
4675                                 printf("(%s:%c:%d:%d): PPR Rejected. "
4676                                        "Trying simple U160 PPR\n",
4677                                        ahd_name(ahd), devinfo->channel,
4678                                        devinfo->target, devinfo->lun);
4679                         }
4680                         tinfo->goal.period = AHD_SYNCRATE_DT;
4681                         tinfo->goal.ppr_options &= MSG_EXT_PPR_IU_REQ
4682                                                 |  MSG_EXT_PPR_QAS_REQ
4683                                                 |  MSG_EXT_PPR_DT_REQ;
4684                 } else {
4685                         /*
4686                          * Target does not support the PPR message.
4687                          * Attempt to negotiate SPI-2 style.
4688                          */
4689                         if (bootverbose) {
4690                                 printf("(%s:%c:%d:%d): PPR Rejected. "
4691                                        "Trying WDTR/SDTR\n",
4692                                        ahd_name(ahd), devinfo->channel,
4693                                        devinfo->target, devinfo->lun);
4694                         }
4695                         tinfo->goal.ppr_options = 0;
4696                         tinfo->curr.transport_version = 2;
4697                         tinfo->goal.transport_version = 2;
4698                 }
4699                 ahd->msgout_index = 0;
4700                 ahd->msgout_len = 0;
4701                 ahd_build_transfer_msg(ahd, devinfo);
4702                 ahd->msgout_index = 0;
4703                 response = 1;
4704         } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
4705
4706                 /* note 8bit xfers */
4707                 printf("(%s:%c:%d:%d): refuses WIDE negotiation.  Using "
4708                        "8bit transfers\n", ahd_name(ahd),
4709                        devinfo->channel, devinfo->target, devinfo->lun);
4710                 ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
4711                               AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4712                               /*paused*/TRUE);
4713                 /*
4714                  * No need to clear the sync rate.  If the target
4715                  * did not accept the command, our syncrate is
4716                  * unaffected.  If the target started the negotiation,
4717                  * but rejected our response, we already cleared the
4718                  * sync rate before sending our WDTR.
4719                  */
4720                 if (tinfo->goal.offset != tinfo->curr.offset) {
4721
4722                         /* Start the sync negotiation */
4723                         ahd->msgout_index = 0;
4724                         ahd->msgout_len = 0;
4725                         ahd_build_transfer_msg(ahd, devinfo);
4726                         ahd->msgout_index = 0;
4727                         response = 1;
4728                 }
4729         } else if (ahd_sent_msg(ahd, AHDMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
4730                 /* note asynch xfers and clear flag */
4731                 ahd_set_syncrate(ahd, devinfo, /*period*/0,
4732                                  /*offset*/0, /*ppr_options*/0,
4733                                  AHD_TRANS_ACTIVE|AHD_TRANS_GOAL,
4734                                  /*paused*/TRUE);
4735                 printf("(%s:%c:%d:%d): refuses synchronous negotiation. "
4736                        "Using asynchronous transfers\n",
4737                        ahd_name(ahd), devinfo->channel,
4738                        devinfo->target, devinfo->lun);
4739         } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
4740                 int tag_type;
4741                 int mask;
4742
4743                 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
4744
4745                 if (tag_type == MSG_SIMPLE_TASK) {
4746                         printf("(%s:%c:%d:%d): refuses tagged commands.  "
4747                                "Performing non-tagged I/O\n", ahd_name(ahd),
4748                                devinfo->channel, devinfo->target, devinfo->lun);
4749                         ahd_set_tags(ahd, devinfo, AHD_QUEUE_NONE);
4750                         mask = ~0x23;
4751                 } else {
4752                         printf("(%s:%c:%d:%d): refuses %s tagged commands.  "
4753                                "Performing simple queue tagged I/O only\n",
4754                                ahd_name(ahd), devinfo->channel, devinfo->target,
4755                                devinfo->lun, tag_type == MSG_ORDERED_TASK
4756                                ? "ordered" : "head of queue");
4757                         ahd_set_tags(ahd, devinfo, AHD_QUEUE_BASIC);
4758                         mask = ~0x03;
4759                 }
4760
4761                 /*
4762                  * Resend the identify for this CCB as the target
4763                  * may believe that the selection is invalid otherwise.
4764                  */
4765                 ahd_outb(ahd, SCB_CONTROL,
4766                          ahd_inb_scbram(ahd, SCB_CONTROL) & mask);
4767                 scb->hscb->control &= mask;
4768                 ahd_set_transaction_tag(scb, /*enabled*/FALSE,
4769                                         /*type*/MSG_SIMPLE_TASK);
4770                 ahd_outb(ahd, MSG_OUT, MSG_IDENTIFYFLAG);
4771                 ahd_assert_atn(ahd);
4772                 ahd_busy_tcl(ahd, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
4773                              SCB_GET_TAG(scb));
4774
4775                 /*
4776                  * Requeue all tagged commands for this target
4777                  * currently in our posession so they can be
4778                  * converted to untagged commands.
4779                  */
4780                 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
4781                                    SCB_GET_CHANNEL(ahd, scb),
4782                                    SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
4783                                    ROLE_INITIATOR, CAM_REQUEUE_REQ,
4784                                    SEARCH_COMPLETE);
4785         } else if (ahd_sent_msg(ahd, AHDMSG_1B, MSG_IDENTIFYFLAG, TRUE)) {
4786                 /*
4787                  * Most likely the device believes that we had
4788                  * previously negotiated packetized.
4789                  */
4790                 ahd->msg_flags |= MSG_FLAG_EXPECT_PPR_BUSFREE
4791                                |  MSG_FLAG_IU_REQ_CHANGED;
4792
4793                 ahd_force_renegotiation(ahd, devinfo);
4794                 ahd->msgout_index = 0;
4795                 ahd->msgout_len = 0;
4796                 ahd_build_transfer_msg(ahd, devinfo);
4797                 ahd->msgout_index = 0;
4798                 response = 1;
4799         } else {
4800                 /*
4801                  * Otherwise, we ignore it.
4802                  */
4803                 printf("%s:%c:%d: Message reject for %x -- ignored\n",
4804                        ahd_name(ahd), devinfo->channel, devinfo->target,
4805                        last_msg);
4806         }
4807         return (response);
4808 }
4809
4810 /*
4811  * Process an ingnore wide residue message.
4812  */
4813 static void
4814 ahd_handle_ign_wide_residue(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
4815 {
4816         u_int scb_index;
4817         struct scb *scb;
4818
4819         scb_index = ahd_get_scbptr(ahd);
4820         scb = ahd_lookup_scb(ahd, scb_index);
4821         /*
4822          * XXX Actually check data direction in the sequencer?
4823          * Perhaps add datadir to some spare bits in the hscb?
4824          */
4825         if ((ahd_inb(ahd, SEQ_FLAGS) & DPHASE) == 0
4826          || ahd_get_transfer_dir(scb) != CAM_DIR_IN) {
4827                 /*
4828                  * Ignore the message if we haven't
4829                  * seen an appropriate data phase yet.
4830                  */
4831         } else {
4832                 /*
4833                  * If the residual occurred on the last
4834                  * transfer and the transfer request was
4835                  * expected to end on an odd count, do
4836                  * nothing.  Otherwise, subtract a byte
4837                  * and update the residual count accordingly.
4838                  */
4839                 uint32_t sgptr;
4840
4841                 sgptr = ahd_inb_scbram(ahd, SCB_RESIDUAL_SGPTR);
4842                 if ((sgptr & SG_LIST_NULL) != 0
4843                  && (ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
4844                      & SCB_XFERLEN_ODD) != 0) {
4845                         /*
4846                          * If the residual occurred on the last
4847                          * transfer and the transfer request was
4848                          * expected to end on an odd count, do
4849                          * nothing.
4850                          */
4851                 } else {
4852                         uint32_t data_cnt;
4853                         uint64_t data_addr;
4854                         uint32_t sglen;
4855
4856                         /* Pull in the rest of the sgptr */
4857                         sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
4858                         data_cnt = ahd_inl_scbram(ahd, SCB_RESIDUAL_DATACNT);
4859                         if ((sgptr & SG_LIST_NULL) != 0) {
4860                                 /*
4861                                  * The residual data count is not updated
4862                                  * for the command run to completion case.
4863                                  * Explicitly zero the count.
4864                                  */
4865                                 data_cnt &= ~AHD_SG_LEN_MASK;
4866                         }
4867                         data_addr = ahd_inq(ahd, SHADDR);
4868                         data_cnt += 1;
4869                         data_addr -= 1;
4870                         sgptr &= SG_PTR_MASK;
4871                         if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
4872                                 struct ahd_dma64_seg *sg;
4873
4874                                 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4875
4876                                 /*
4877                                  * The residual sg ptr points to the next S/G
4878                                  * to load so we must go back one.
4879                                  */
4880                                 sg--;
4881                                 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
4882                                 if (sg != scb->sg_list
4883                                  && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
4884
4885                                         sg--;
4886                                         sglen = ahd_le32toh(sg->len);
4887                                         /*
4888                                          * Preserve High Address and SG_LIST
4889                                          * bits while setting the count to 1.
4890                                          */
4891                                         data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
4892                                         data_addr = ahd_le64toh(sg->addr)
4893                                                   + (sglen & AHD_SG_LEN_MASK)
4894                                                   - 1;
4895
4896                                         /*
4897                                          * Increment sg so it points to the
4898                                          * "next" sg.
4899                                          */
4900                                         sg++;
4901                                         sgptr = ahd_sg_virt_to_bus(ahd, scb,
4902                                                                    sg);
4903                                 }
4904                         } else {
4905                                 struct ahd_dma_seg *sg;
4906
4907                                 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
4908
4909                                 /*
4910                                  * The residual sg ptr points to the next S/G
4911                                  * to load so we must go back one.
4912                                  */
4913                                 sg--;
4914                                 sglen = ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
4915                                 if (sg != scb->sg_list
4916                                  && sglen < (data_cnt & AHD_SG_LEN_MASK)) {
4917
4918                                         sg--;
4919                                         sglen = ahd_le32toh(sg->len);
4920                                         /*
4921                                          * Preserve High Address and SG_LIST
4922                                          * bits while setting the count to 1.
4923                                          */
4924                                         data_cnt = 1|(sglen&(~AHD_SG_LEN_MASK));
4925                                         data_addr = ahd_le32toh(sg->addr)
4926                                                   + (sglen & AHD_SG_LEN_MASK)
4927                                                   - 1;
4928
4929                                         /*
4930                                          * Increment sg so it points to the
4931                                          * "next" sg.
4932                                          */
4933                                         sg++;
4934                                         sgptr = ahd_sg_virt_to_bus(ahd, scb,
4935                                                                   sg);
4936                                 }
4937                         }
4938                         /*
4939                          * Toggle the "oddness" of the transfer length
4940                          * to handle this mid-transfer ignore wide
4941                          * residue.  This ensures that the oddness is
4942                          * correct for subsequent data transfers.
4943                          */
4944                         ahd_outb(ahd, SCB_TASK_ATTRIBUTE,
4945                             ahd_inb_scbram(ahd, SCB_TASK_ATTRIBUTE)
4946                             ^ SCB_XFERLEN_ODD);
4947
4948                         ahd_outl(ahd, SCB_RESIDUAL_SGPTR, sgptr);
4949                         ahd_outl(ahd, SCB_RESIDUAL_DATACNT, data_cnt);
4950                         /*
4951                          * The FIFO's pointers will be updated if/when the
4952                          * sequencer re-enters a data phase.
4953                          */
4954                 }
4955         }
4956 }
4957
4958
4959 /*
4960  * Reinitialize the data pointers for the active transfer
4961  * based on its current residual.
4962  */
4963 static void
4964 ahd_reinitialize_dataptrs(struct ahd_softc *ahd)
4965 {
4966         struct           scb *scb;
4967         ahd_mode_state   saved_modes;
4968         u_int            scb_index;
4969         u_int            wait;
4970         uint32_t         sgptr;
4971         uint32_t         resid;
4972         uint64_t         dataptr;
4973
4974         AHD_ASSERT_MODES(ahd, AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK,
4975                          AHD_MODE_DFF0_MSK|AHD_MODE_DFF1_MSK);
4976                          
4977         scb_index = ahd_get_scbptr(ahd);
4978         scb = ahd_lookup_scb(ahd, scb_index);
4979
4980         /*
4981          * Release and reacquire the FIFO so we
4982          * have a clean slate.
4983          */
4984         ahd_outb(ahd, DFFSXFRCTL, CLRCHN);
4985         wait = 1000;
4986         while (--wait && !(ahd_inb(ahd, MDFFSTAT) & FIFOFREE))
4987                 ahd_delay(100);
4988         if (wait == 0) {
4989                 ahd_print_path(ahd, scb);
4990                 printf("ahd_reinitialize_dataptrs: Forcing FIFO free.\n");
4991                 ahd_outb(ahd, DFFSXFRCTL, RSTCHN|CLRSHCNT);
4992         }
4993         saved_modes = ahd_save_modes(ahd);
4994         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
4995         ahd_outb(ahd, DFFSTAT,
4996                  ahd_inb(ahd, DFFSTAT)
4997                 | (saved_modes == 0x11 ? CURRFIFO_1 : CURRFIFO_0));
4998
4999         /*
5000          * Determine initial values for data_addr and data_cnt
5001          * for resuming the data phase.
5002          */
5003         sgptr = ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR);
5004         sgptr &= SG_PTR_MASK;
5005
5006         resid = (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 2) << 16)
5007               | (ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT + 1) << 8)
5008               | ahd_inb_scbram(ahd, SCB_RESIDUAL_DATACNT);
5009
5010         if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
5011                 struct ahd_dma64_seg *sg;
5012
5013                 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5014
5015                 /* The residual sg_ptr always points to the next sg */
5016                 sg--;
5017
5018                 dataptr = ahd_le64toh(sg->addr)
5019                         + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
5020                         - resid;
5021                 ahd_outl(ahd, HADDR + 4, dataptr >> 32);
5022         } else {
5023                 struct   ahd_dma_seg *sg;
5024
5025                 sg = ahd_sg_bus_to_virt(ahd, scb, sgptr);
5026
5027                 /* The residual sg_ptr always points to the next sg */
5028                 sg--;
5029
5030                 dataptr = ahd_le32toh(sg->addr)
5031                         + (ahd_le32toh(sg->len) & AHD_SG_LEN_MASK)
5032                         - resid;
5033                 ahd_outb(ahd, HADDR + 4,
5034                          (ahd_le32toh(sg->len) & ~AHD_SG_LEN_MASK) >> 24);
5035         }
5036         ahd_outl(ahd, HADDR, dataptr);
5037         ahd_outb(ahd, HCNT + 2, resid >> 16);
5038         ahd_outb(ahd, HCNT + 1, resid >> 8);
5039         ahd_outb(ahd, HCNT, resid);
5040 }
5041
5042 /*
5043  * Handle the effects of issuing a bus device reset message.
5044  */
5045 static void
5046 ahd_handle_devreset(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5047                     u_int lun, cam_status status, char *message,
5048                     int verbose_level)
5049 {
5050 #ifdef AHD_TARGET_MODE
5051         struct ahd_tmode_tstate* tstate;
5052 #endif
5053         int found;
5054
5055         found = ahd_abort_scbs(ahd, devinfo->target, devinfo->channel,
5056                                lun, SCB_LIST_NULL, devinfo->role,
5057                                status);
5058
5059 #ifdef AHD_TARGET_MODE
5060         /*
5061          * Send an immediate notify ccb to all target mord peripheral
5062          * drivers affected by this action.
5063          */
5064         tstate = ahd->enabled_targets[devinfo->our_scsiid];
5065         if (tstate != NULL) {
5066                 u_int cur_lun;
5067                 u_int max_lun;
5068
5069                 if (lun != CAM_LUN_WILDCARD) {
5070                         cur_lun = 0;
5071                         max_lun = AHD_NUM_LUNS - 1;
5072                 } else {
5073                         cur_lun = lun;
5074                         max_lun = lun;
5075                 }
5076                 for (cur_lun <= max_lun; cur_lun++) {
5077                         struct ahd_tmode_lstate* lstate;
5078
5079                         lstate = tstate->enabled_luns[cur_lun];
5080                         if (lstate == NULL)
5081                                 continue;
5082
5083                         ahd_queue_lstate_event(ahd, lstate, devinfo->our_scsiid,
5084                                                MSG_BUS_DEV_RESET, /*arg*/0);
5085                         ahd_send_lstate_events(ahd, lstate);
5086                 }
5087         }
5088 #endif
5089
5090         /*
5091          * Go back to async/narrow transfers and renegotiate.
5092          */
5093         ahd_set_width(ahd, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
5094                       AHD_TRANS_CUR, /*paused*/TRUE);
5095         ahd_set_syncrate(ahd, devinfo, /*period*/0, /*offset*/0,
5096                          /*ppr_options*/0, AHD_TRANS_CUR,
5097                          /*paused*/TRUE);
5098         
5099         if (status != CAM_SEL_TIMEOUT)
5100                 ahd_send_async(ahd, devinfo->channel, devinfo->target,
5101                                CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
5102
5103         if (message != NULL && bootverbose)
5104                 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
5105                        message, devinfo->channel, devinfo->target, found);
5106 }
5107
5108 #ifdef AHD_TARGET_MODE
5109 static void
5110 ahd_setup_target_msgin(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
5111                        struct scb *scb)
5112 {
5113
5114         /*              
5115          * To facilitate adding multiple messages together,
5116          * each routine should increment the index and len
5117          * variables instead of setting them explicitly.
5118          */             
5119         ahd->msgout_index = 0;
5120         ahd->msgout_len = 0;
5121
5122         if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
5123                 ahd_build_transfer_msg(ahd, devinfo);
5124         else
5125                 panic("ahd_intr: AWAITING target message with no message");
5126
5127         ahd->msgout_index = 0;
5128         ahd->msg_type = MSG_TYPE_TARGET_MSGIN;
5129 }
5130 #endif
5131 /**************************** Initialization **********************************/
5132 static u_int
5133 ahd_sglist_size(struct ahd_softc *ahd)
5134 {
5135         bus_size_t list_size;
5136
5137         list_size = sizeof(struct ahd_dma_seg) * AHD_NSEG;
5138         if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
5139                 list_size = sizeof(struct ahd_dma64_seg) * AHD_NSEG;
5140         return (list_size);
5141 }
5142
5143 /*
5144  * Calculate the optimum S/G List allocation size.  S/G elements used
5145  * for a given transaction must be physically contiguous.  Assume the
5146  * OS will allocate full pages to us, so it doesn't make sense to request
5147  * less than a page.
5148  */
5149 static u_int
5150 ahd_sglist_allocsize(struct ahd_softc *ahd)
5151 {
5152         bus_size_t sg_list_increment;
5153         bus_size_t sg_list_size;
5154         bus_size_t max_list_size;
5155         bus_size_t best_list_size;
5156
5157         /* Start out with the minimum required for AHD_NSEG. */
5158         sg_list_increment = ahd_sglist_size(ahd);
5159         sg_list_size = sg_list_increment;
5160
5161         /* Get us as close as possible to a page in size. */
5162         while ((sg_list_size + sg_list_increment) <= PAGE_SIZE)
5163                 sg_list_size += sg_list_increment;
5164
5165         /*
5166          * Try to reduce the amount of wastage by allocating
5167          * multiple pages.
5168          */
5169         best_list_size = sg_list_size;
5170         max_list_size = roundup(sg_list_increment, PAGE_SIZE);
5171         if (max_list_size < 4 * PAGE_SIZE)
5172                 max_list_size = 4 * PAGE_SIZE;
5173         if (max_list_size > (AHD_SCB_MAX_ALLOC * sg_list_increment))
5174                 max_list_size = (AHD_SCB_MAX_ALLOC * sg_list_increment);
5175         while ((sg_list_size + sg_list_increment) <= max_list_size
5176            &&  (sg_list_size % PAGE_SIZE) != 0) {
5177                 bus_size_t new_mod;
5178                 bus_size_t best_mod;
5179
5180                 sg_list_size += sg_list_increment;
5181                 new_mod = sg_list_size % PAGE_SIZE;
5182                 best_mod = best_list_size % PAGE_SIZE;
5183                 if (new_mod > best_mod || new_mod == 0) {
5184                         best_list_size = sg_list_size;
5185                 }
5186         }
5187         return (best_list_size);
5188 }
5189
5190 /*
5191  * Allocate a controller structure for a new device
5192  * and perform initial initializion.
5193  */
5194 struct ahd_softc *
5195 ahd_alloc(void *platform_arg, char *name)
5196 {
5197         struct  ahd_softc *ahd;
5198
5199 #ifndef __FreeBSD__
5200         ahd = malloc(sizeof(*ahd), M_DEVBUF, M_NOWAIT);
5201         if (!ahd) {
5202                 printf("aic7xxx: cannot malloc softc!\n");
5203                 free(name, M_DEVBUF);
5204                 return NULL;
5205         }
5206 #else
5207         ahd = device_get_softc((device_t)platform_arg);
5208 #endif
5209         memset(ahd, 0, sizeof(*ahd));
5210         ahd->seep_config = malloc(sizeof(*ahd->seep_config),
5211                                   M_DEVBUF, M_NOWAIT);
5212         if (ahd->seep_config == NULL) {
5213 #ifndef __FreeBSD__
5214                 free(ahd, M_DEVBUF);
5215 #endif
5216                 free(name, M_DEVBUF);
5217                 return (NULL);
5218         }
5219         LIST_INIT(&ahd->pending_scbs);
5220         /* We don't know our unit number until the OSM sets it */
5221         ahd->name = name;
5222         ahd->unit = -1;
5223         ahd->description = NULL;
5224         ahd->bus_description = NULL;
5225         ahd->channel = 'A';
5226         ahd->chip = AHD_NONE;
5227         ahd->features = AHD_FENONE;
5228         ahd->bugs = AHD_BUGNONE;
5229         ahd->flags = AHD_SPCHK_ENB_A|AHD_RESET_BUS_A|AHD_TERM_ENB_A
5230                    | AHD_EXTENDED_TRANS_A|AHD_STPWLEVEL_A;
5231         ahd_timer_init(&ahd->reset_timer);
5232         ahd_timer_init(&ahd->stat_timer);
5233         ahd->int_coalescing_timer = AHD_INT_COALESCING_TIMER_DEFAULT;
5234         ahd->int_coalescing_maxcmds = AHD_INT_COALESCING_MAXCMDS_DEFAULT;
5235         ahd->int_coalescing_mincmds = AHD_INT_COALESCING_MINCMDS_DEFAULT;
5236         ahd->int_coalescing_threshold = AHD_INT_COALESCING_THRESHOLD_DEFAULT;
5237         ahd->int_coalescing_stop_threshold =
5238             AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT;
5239
5240         if (ahd_platform_alloc(ahd, platform_arg) != 0) {
5241                 ahd_free(ahd);
5242                 ahd = NULL;
5243         }
5244 #ifdef AHD_DEBUG
5245         if ((ahd_debug & AHD_SHOW_MEMORY) != 0) {
5246                 printf("%s: scb size = 0x%x, hscb size = 0x%x\n",
5247                        ahd_name(ahd), (u_int)sizeof(struct scb),
5248                        (u_int)sizeof(struct hardware_scb));
5249         }
5250 #endif
5251         return (ahd);
5252 }
5253
5254 int
5255 ahd_softc_init(struct ahd_softc *ahd)
5256 {
5257
5258         ahd->unpause = 0;
5259         ahd->pause = PAUSE; 
5260         return (0);
5261 }
5262
5263 void
5264 ahd_set_unit(struct ahd_softc *ahd, int unit)
5265 {
5266         ahd->unit = unit;
5267 }
5268
5269 void
5270 ahd_set_name(struct ahd_softc *ahd, char *name)
5271 {
5272         if (ahd->name != NULL)
5273                 free(ahd->name, M_DEVBUF);
5274         ahd->name = name;
5275 }
5276
5277 void
5278 ahd_free(struct ahd_softc *ahd)
5279 {
5280         int i;
5281
5282         switch (ahd->init_level) {
5283         default:
5284         case 5:
5285                 ahd_shutdown(ahd);
5286                 /* FALLTHROUGH */
5287         case 4:
5288                 ahd_dmamap_unload(ahd, ahd->shared_data_dmat,
5289                                   ahd->shared_data_map.dmamap);
5290                 /* FALLTHROUGH */
5291         case 3:
5292                 ahd_dmamem_free(ahd, ahd->shared_data_dmat, ahd->qoutfifo,
5293                                 ahd->shared_data_map.dmamap);
5294                 ahd_dmamap_destroy(ahd, ahd->shared_data_dmat,
5295                                    ahd->shared_data_map.dmamap);
5296                 /* FALLTHROUGH */
5297         case 2:
5298                 ahd_dma_tag_destroy(ahd, ahd->shared_data_dmat);
5299         case 1:
5300 #ifndef __linux__
5301                 ahd_dma_tag_destroy(ahd, ahd->buffer_dmat);
5302 #endif
5303                 break;
5304         case 0:
5305                 break;
5306         }
5307
5308 #ifndef __linux__
5309         ahd_dma_tag_destroy(ahd, ahd->parent_dmat);
5310 #endif
5311         ahd_platform_free(ahd);
5312         ahd_fini_scbdata(ahd);
5313         for (i = 0; i < AHD_NUM_TARGETS; i++) {
5314                 struct ahd_tmode_tstate *tstate;
5315
5316                 tstate = ahd->enabled_targets[i];
5317                 if (tstate != NULL) {
5318 #ifdef AHD_TARGET_MODE
5319                         int j;
5320
5321                         for (j = 0; j < AHD_NUM_LUNS; j++) {
5322                                 struct ahd_tmode_lstate *lstate;
5323
5324                                 lstate = tstate->enabled_luns[j];
5325                                 if (lstate != NULL) {
5326                                         xpt_free_path(lstate->path);
5327                                         free(lstate, M_DEVBUF);
5328                                 }
5329                         }
5330 #endif
5331                         free(tstate, M_DEVBUF);
5332                 }
5333         }
5334 #ifdef AHD_TARGET_MODE
5335         if (ahd->black_hole != NULL) {
5336                 xpt_free_path(ahd->black_hole->path);
5337                 free(ahd->black_hole, M_DEVBUF);
5338         }
5339 #endif
5340         if (ahd->name != NULL)
5341                 free(ahd->name, M_DEVBUF);
5342         if (ahd->seep_config != NULL)
5343                 free(ahd->seep_config, M_DEVBUF);
5344         if (ahd->saved_stack != NULL)
5345                 free(ahd->saved_stack, M_DEVBUF);
5346 #ifndef __FreeBSD__
5347         free(ahd, M_DEVBUF);
5348 #endif
5349         return;
5350 }
5351
5352 void
5353 ahd_shutdown(void *arg)
5354 {
5355         struct  ahd_softc *ahd;
5356
5357         ahd = (struct ahd_softc *)arg;
5358
5359         /*
5360          * Stop periodic timer callbacks.
5361          */
5362         ahd_timer_stop(&ahd->reset_timer);
5363         ahd_timer_stop(&ahd->stat_timer);
5364
5365         /* This will reset most registers to 0, but not all */
5366         ahd_reset(ahd, /*reinit*/FALSE);
5367 }
5368
5369 /*
5370  * Reset the controller and record some information about it
5371  * that is only available just after a reset.  If "reinit" is
5372  * non-zero, this reset occured after initial configuration
5373  * and the caller requests that the chip be fully reinitialized
5374  * to a runable state.  Chip interrupts are *not* enabled after
5375  * a reinitialization.  The caller must enable interrupts via
5376  * ahd_intr_enable().
5377  */
5378 int
5379 ahd_reset(struct ahd_softc *ahd, int reinit)
5380 {
5381         u_int    sxfrctl1;
5382         int      wait;
5383         uint32_t cmd;
5384         
5385         /*
5386          * Preserve the value of the SXFRCTL1 register for all channels.
5387          * It contains settings that affect termination and we don't want
5388          * to disturb the integrity of the bus.
5389          */
5390         ahd_pause(ahd);
5391         ahd_update_modes(ahd);
5392         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5393         sxfrctl1 = ahd_inb(ahd, SXFRCTL1);
5394
5395         cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
5396         if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
5397                 uint32_t mod_cmd;
5398
5399                 /*
5400                  * A4 Razor #632
5401                  * During the assertion of CHIPRST, the chip
5402                  * does not disable its parity logic prior to
5403                  * the start of the reset.  This may cause a
5404                  * parity error to be detected and thus a
5405                  * spurious SERR or PERR assertion.  Disble
5406                  * PERR and SERR responses during the CHIPRST.
5407                  */
5408                 mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);
5409                 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
5410                                      mod_cmd, /*bytes*/2);
5411         }
5412         ahd_outb(ahd, HCNTRL, CHIPRST | ahd->pause);
5413
5414         /*
5415          * Ensure that the reset has finished.  We delay 1000us
5416          * prior to reading the register to make sure the chip
5417          * has sufficiently completed its reset to handle register
5418          * accesses.
5419          */
5420         wait = 1000;
5421         do {
5422                 ahd_delay(1000);
5423         } while (--wait && !(ahd_inb(ahd, HCNTRL) & CHIPRSTACK));
5424
5425         if (wait == 0) {
5426                 printf("%s: WARNING - Failed chip reset!  "
5427                        "Trying to initialize anyway.\n", ahd_name(ahd));
5428         }
5429         ahd_outb(ahd, HCNTRL, ahd->pause);
5430
5431         if ((ahd->bugs & AHD_PCIX_CHIPRST_BUG) != 0) {
5432                 /*
5433                  * Clear any latched PCI error status and restore
5434                  * previous SERR and PERR response enables.
5435                  */
5436                 ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
5437                                      0xFF, /*bytes*/1);
5438                 ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
5439                                      cmd, /*bytes*/2);
5440         }
5441
5442         /*
5443          * Mode should be SCSI after a chip reset, but lets
5444          * set it just to be safe.  We touch the MODE_PTR
5445          * register directly so as to bypass the lazy update
5446          * code in ahd_set_modes().
5447          */
5448         ahd_known_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5449         ahd_outb(ahd, MODE_PTR,
5450                  ahd_build_mode_state(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI));
5451
5452         /*
5453          * Restore SXFRCTL1.
5454          *
5455          * We must always initialize STPWEN to 1 before we
5456          * restore the saved values.  STPWEN is initialized
5457          * to a tri-state condition which can only be cleared
5458          * by turning it on.
5459          */
5460         ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
5461         ahd_outb(ahd, SXFRCTL1, sxfrctl1);
5462
5463         /* Determine chip configuration */
5464         ahd->features &= ~AHD_WIDE;
5465         if ((ahd_inb(ahd, SBLKCTL) & SELWIDE) != 0)
5466                 ahd->features |= AHD_WIDE;
5467
5468         /*
5469          * If a recovery action has forced a chip reset,
5470          * re-initialize the chip to our liking.
5471          */
5472         if (reinit != 0)
5473                 ahd_chip_init(ahd);
5474
5475         return (0);
5476 }
5477
5478 /*
5479  * Determine the number of SCBs available on the controller
5480  */
5481 int
5482 ahd_probe_scbs(struct ahd_softc *ahd) {
5483         int i;
5484
5485         AHD_ASSERT_MODES(ahd, ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK),
5486                          ~(AHD_MODE_UNKNOWN_MSK|AHD_MODE_CFG_MSK));
5487         for (i = 0; i < AHD_SCB_MAX; i++) {
5488                 int j;
5489
5490                 ahd_set_scbptr(ahd, i);
5491                 ahd_outw(ahd, SCB_BASE, i);
5492                 for (j = 2; j < 64; j++)
5493                         ahd_outb(ahd, SCB_BASE+j, 0);
5494                 /* Start out life as unallocated (needing an abort) */
5495                 ahd_outb(ahd, SCB_CONTROL, MK_MESSAGE);
5496                 if (ahd_inw_scbram(ahd, SCB_BASE) != i)
5497                         break;
5498                 ahd_set_scbptr(ahd, 0);
5499                 if (ahd_inw_scbram(ahd, SCB_BASE) != 0)
5500                         break;
5501         }
5502         return (i);
5503 }
5504
5505 static void
5506 ahd_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 
5507 {
5508         dma_addr_t *baddr;
5509
5510         baddr = (dma_addr_t *)arg;
5511         *baddr = segs->ds_addr;
5512 }
5513
5514 static void
5515 ahd_initialize_hscbs(struct ahd_softc *ahd)
5516 {
5517         int i;
5518
5519         for (i = 0; i < ahd->scb_data.maxhscbs; i++) {
5520                 ahd_set_scbptr(ahd, i);
5521
5522                 /* Clear the control byte. */
5523                 ahd_outb(ahd, SCB_CONTROL, 0);
5524
5525                 /* Set the next pointer */
5526                 ahd_outw(ahd, SCB_NEXT, SCB_LIST_NULL);
5527         }
5528 }
5529
5530 static int
5531 ahd_init_scbdata(struct ahd_softc *ahd)
5532 {
5533         struct  scb_data *scb_data;
5534         int     i;
5535
5536         scb_data = &ahd->scb_data;
5537         TAILQ_INIT(&scb_data->free_scbs);
5538         for (i = 0; i < AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT; i++)
5539                 LIST_INIT(&scb_data->free_scb_lists[i]);
5540         LIST_INIT(&scb_data->any_dev_free_scb_list);
5541         SLIST_INIT(&scb_data->hscb_maps);
5542         SLIST_INIT(&scb_data->sg_maps);
5543         SLIST_INIT(&scb_data->sense_maps);
5544
5545         /* Determine the number of hardware SCBs and initialize them */
5546         scb_data->maxhscbs = ahd_probe_scbs(ahd);
5547         if (scb_data->maxhscbs == 0) {
5548                 printf("%s: No SCB space found\n", ahd_name(ahd));
5549                 return (ENXIO);
5550         }
5551
5552         ahd_initialize_hscbs(ahd);
5553
5554         /*
5555          * Create our DMA tags.  These tags define the kinds of device
5556          * accessible memory allocations and memory mappings we will
5557          * need to perform during normal operation.
5558          *
5559          * Unless we need to further restrict the allocation, we rely
5560          * on the restrictions of the parent dmat, hence the common
5561          * use of MAXADDR and MAXSIZE.
5562          */
5563
5564         /* DMA tag for our hardware scb structures */
5565         if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
5566                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5567                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5568                                /*highaddr*/BUS_SPACE_MAXADDR,
5569                                /*filter*/NULL, /*filterarg*/NULL,
5570                                PAGE_SIZE, /*nsegments*/1,
5571                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5572                                /*flags*/0, &scb_data->hscb_dmat) != 0) {
5573                 goto error_exit;
5574         }
5575
5576         scb_data->init_level++;
5577
5578         /* DMA tag for our S/G structures. */
5579         if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/8,
5580                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5581                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5582                                /*highaddr*/BUS_SPACE_MAXADDR,
5583                                /*filter*/NULL, /*filterarg*/NULL,
5584                                ahd_sglist_allocsize(ahd), /*nsegments*/1,
5585                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5586                                /*flags*/0, &scb_data->sg_dmat) != 0) {
5587                 goto error_exit;
5588         }
5589 #ifdef AHD_DEBUG
5590         if ((ahd_debug & AHD_SHOW_MEMORY) != 0)
5591                 printf("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd),
5592                        ahd_sglist_allocsize(ahd));
5593 #endif
5594
5595         scb_data->init_level++;
5596
5597         /* DMA tag for our sense buffers.  We allocate in page sized chunks */
5598         if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
5599                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
5600                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
5601                                /*highaddr*/BUS_SPACE_MAXADDR,
5602                                /*filter*/NULL, /*filterarg*/NULL,
5603                                PAGE_SIZE, /*nsegments*/1,
5604                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
5605                                /*flags*/0, &scb_data->sense_dmat) != 0) {
5606                 goto error_exit;
5607         }
5608
5609         scb_data->init_level++;
5610
5611         /* Perform initial CCB allocation */
5612         ahd_alloc_scbs(ahd);
5613
5614         if (scb_data->numscbs == 0) {
5615                 printf("%s: ahd_init_scbdata - "
5616                        "Unable to allocate initial scbs\n",
5617                        ahd_name(ahd));
5618                 goto error_exit;
5619         }
5620
5621         /*
5622          * Note that we were successfull
5623          */
5624         return (0); 
5625
5626 error_exit:
5627
5628         return (ENOMEM);
5629 }
5630
5631 static struct scb *
5632 ahd_find_scb_by_tag(struct ahd_softc *ahd, u_int tag)
5633 {
5634         struct scb *scb;
5635
5636         /*
5637          * Look on the pending list.
5638          */
5639         LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
5640                 if (SCB_GET_TAG(scb) == tag)
5641                         return (scb);
5642         }
5643
5644         /*
5645          * Then on all of the collision free lists.
5646          */
5647         TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
5648                 struct scb *list_scb;
5649
5650                 list_scb = scb;
5651                 do {
5652                         if (SCB_GET_TAG(list_scb) == tag)
5653                                 return (list_scb);
5654                         list_scb = LIST_NEXT(list_scb, collision_links);
5655                 } while (list_scb);
5656         }
5657
5658         /*
5659          * And finally on the generic free list.
5660          */
5661         LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
5662                 if (SCB_GET_TAG(scb) == tag)
5663                         return (scb);
5664         }
5665
5666         return (NULL);
5667 }
5668
5669 static void
5670 ahd_fini_scbdata(struct ahd_softc *ahd)
5671 {
5672         struct scb_data *scb_data;
5673
5674         scb_data = &ahd->scb_data;
5675         if (scb_data == NULL)
5676                 return;
5677
5678         switch (scb_data->init_level) {
5679         default:
5680         case 7:
5681         {
5682                 struct map_node *sns_map;
5683
5684                 while ((sns_map = SLIST_FIRST(&scb_data->sense_maps)) != NULL) {
5685                         SLIST_REMOVE_HEAD(&scb_data->sense_maps, links);
5686                         ahd_dmamap_unload(ahd, scb_data->sense_dmat,
5687                                           sns_map->dmamap);
5688                         ahd_dmamem_free(ahd, scb_data->sense_dmat,
5689                                         sns_map->vaddr, sns_map->dmamap);
5690                         free(sns_map, M_DEVBUF);
5691                 }
5692                 ahd_dma_tag_destroy(ahd, scb_data->sense_dmat);
5693                 /* FALLTHROUGH */
5694         }
5695         case 6:
5696         {
5697                 struct map_node *sg_map;
5698
5699                 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps)) != NULL) {
5700                         SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
5701                         ahd_dmamap_unload(ahd, scb_data->sg_dmat,
5702                                           sg_map->dmamap);
5703                         ahd_dmamem_free(ahd, scb_data->sg_dmat,
5704                                         sg_map->vaddr, sg_map->dmamap);
5705                         free(sg_map, M_DEVBUF);
5706                 }
5707                 ahd_dma_tag_destroy(ahd, scb_data->sg_dmat);
5708                 /* FALLTHROUGH */
5709         }
5710         case 5:
5711         {
5712                 struct map_node *hscb_map;
5713
5714                 while ((hscb_map = SLIST_FIRST(&scb_data->hscb_maps)) != NULL) {
5715                         SLIST_REMOVE_HEAD(&scb_data->hscb_maps, links);
5716                         ahd_dmamap_unload(ahd, scb_data->hscb_dmat,
5717                                           hscb_map->dmamap);
5718                         ahd_dmamem_free(ahd, scb_data->hscb_dmat,
5719                                         hscb_map->vaddr, hscb_map->dmamap);
5720                         free(hscb_map, M_DEVBUF);
5721                 }
5722                 ahd_dma_tag_destroy(ahd, scb_data->hscb_dmat);
5723                 /* FALLTHROUGH */
5724         }
5725         case 4:
5726         case 3:
5727         case 2:
5728         case 1:
5729         case 0:
5730                 break;
5731         }
5732 }
5733
5734 /*
5735  * DSP filter Bypass must be enabled until the first selection
5736  * after a change in bus mode (Razor #491 and #493).
5737  */
5738 static void
5739 ahd_setup_iocell_workaround(struct ahd_softc *ahd)
5740 {
5741         ahd_mode_state saved_modes;
5742
5743         saved_modes = ahd_save_modes(ahd);
5744         ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
5745         ahd_outb(ahd, DSPDATACTL, ahd_inb(ahd, DSPDATACTL)
5746                | BYPASSENAB | RCVROFFSTDIS | XMITOFFSTDIS);
5747         ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) | (ENSELDO|ENSELDI));
5748 #ifdef AHD_DEBUG
5749         if ((ahd_debug & AHD_SHOW_MISC) != 0)
5750                 printf("%s: Setting up iocell workaround\n", ahd_name(ahd));
5751 #endif
5752         ahd_restore_modes(ahd, saved_modes);
5753         ahd->flags &= ~AHD_HAD_FIRST_SEL;
5754 }
5755
5756 static void
5757 ahd_iocell_first_selection(struct ahd_softc *ahd)
5758 {
5759         ahd_mode_state  saved_modes;
5760         u_int           sblkctl;
5761
5762         if ((ahd->flags & AHD_HAD_FIRST_SEL) != 0)
5763                 return;
5764         saved_modes = ahd_save_modes(ahd);
5765         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
5766         sblkctl = ahd_inb(ahd, SBLKCTL);
5767         ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
5768 #ifdef AHD_DEBUG
5769         if ((ahd_debug & AHD_SHOW_MISC) != 0)
5770                 printf("%s: iocell first selection\n", ahd_name(ahd));
5771 #endif
5772         if ((sblkctl & ENAB40) != 0) {
5773                 ahd_outb(ahd, DSPDATACTL,
5774                          ahd_inb(ahd, DSPDATACTL) & ~BYPASSENAB);
5775 #ifdef AHD_DEBUG
5776                 if ((ahd_debug & AHD_SHOW_MISC) != 0)
5777                         printf("%s: BYPASS now disabled\n", ahd_name(ahd));
5778 #endif
5779         }
5780         ahd_outb(ahd, SIMODE0, ahd_inb(ahd, SIMODE0) & ~(ENSELDO|ENSELDI));
5781         ahd_outb(ahd, CLRINT, CLRSCSIINT);
5782         ahd_restore_modes(ahd, saved_modes);
5783         ahd->flags |= AHD_HAD_FIRST_SEL;
5784 }
5785
5786 /*************************** SCB Management ***********************************/
5787 static void
5788 ahd_add_col_list(struct ahd_softc *ahd, struct scb *scb, u_int col_idx)
5789 {
5790         struct  scb_list *free_list;
5791         struct  scb_tailq *free_tailq;
5792         struct  scb *first_scb;
5793
5794         scb->flags |= SCB_ON_COL_LIST;
5795         AHD_SET_SCB_COL_IDX(scb, col_idx);
5796         free_list = &ahd->scb_data.free_scb_lists[col_idx];
5797         free_tailq = &ahd->scb_data.free_scbs;
5798         first_scb = LIST_FIRST(free_list);
5799         if (first_scb != NULL) {
5800                 LIST_INSERT_AFTER(first_scb, scb, collision_links);
5801         } else {
5802                 LIST_INSERT_HEAD(free_list, scb, collision_links);
5803                 TAILQ_INSERT_TAIL(free_tailq, scb, links.tqe);
5804         }
5805 }
5806
5807 static void
5808 ahd_rem_col_list(struct ahd_softc *ahd, struct scb *scb)
5809 {
5810         struct  scb_list *free_list;
5811         struct  scb_tailq *free_tailq;
5812         struct  scb *first_scb;
5813         u_int   col_idx;
5814
5815         scb->flags &= ~SCB_ON_COL_LIST;
5816         col_idx = AHD_GET_SCB_COL_IDX(ahd, scb);
5817         free_list = &ahd->scb_data.free_scb_lists[col_idx];
5818         free_tailq = &ahd->scb_data.free_scbs;
5819         first_scb = LIST_FIRST(free_list);
5820         if (first_scb == scb) {
5821                 struct scb *next_scb;
5822
5823                 /*
5824                  * Maintain order in the collision free
5825                  * lists for fairness if this device has
5826                  * other colliding tags active.
5827                  */
5828                 next_scb = LIST_NEXT(scb, collision_links);
5829                 if (next_scb != NULL) {
5830                         TAILQ_INSERT_AFTER(free_tailq, scb,
5831                                            next_scb, links.tqe);
5832                 }
5833                 TAILQ_REMOVE(free_tailq, scb, links.tqe);
5834         }
5835         LIST_REMOVE(scb, collision_links);
5836 }
5837
5838 /*
5839  * Get a free scb. If there are none, see if we can allocate a new SCB.
5840  */
5841 struct scb *
5842 ahd_get_scb(struct ahd_softc *ahd, u_int col_idx)
5843 {
5844         struct scb *scb;
5845         int tries;
5846
5847         tries = 0;
5848 look_again:
5849         TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
5850                 if (AHD_GET_SCB_COL_IDX(ahd, scb) != col_idx) {
5851                         ahd_rem_col_list(ahd, scb);
5852                         goto found;
5853                 }
5854         }
5855         if ((scb = LIST_FIRST(&ahd->scb_data.any_dev_free_scb_list)) == NULL) {
5856
5857                 if (tries++ != 0)
5858                         return (NULL);
5859                 ahd_alloc_scbs(ahd);
5860                 goto look_again;
5861         }
5862         LIST_REMOVE(scb, links.le);
5863         if (col_idx != AHD_NEVER_COL_IDX
5864          && (scb->col_scb != NULL)
5865          && (scb->col_scb->flags & SCB_ACTIVE) == 0) {
5866                 LIST_REMOVE(scb->col_scb, links.le);
5867                 ahd_add_col_list(ahd, scb->col_scb, col_idx);
5868         }
5869 found:
5870         scb->flags |= SCB_ACTIVE;
5871         return (scb);
5872 }
5873
5874 /*
5875  * Return an SCB resource to the free list.
5876  */
5877 void
5878 ahd_free_scb(struct ahd_softc *ahd, struct scb *scb)
5879 {       
5880
5881         /* Clean up for the next user */
5882         scb->flags = SCB_FLAG_NONE;
5883         scb->hscb->control = 0;
5884         ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = NULL;
5885
5886         if (scb->col_scb == NULL) {
5887
5888                 /*
5889                  * No collision possible.  Just free normally.
5890                  */
5891                 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5892                                  scb, links.le);
5893         } else if ((scb->col_scb->flags & SCB_ON_COL_LIST) != 0) {
5894
5895                 /*
5896                  * The SCB we might have collided with is on
5897                  * a free collision list.  Put both SCBs on
5898                  * the generic list.
5899                  */
5900                 ahd_rem_col_list(ahd, scb->col_scb);
5901                 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5902                                  scb, links.le);
5903                 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5904                                  scb->col_scb, links.le);
5905         } else if ((scb->col_scb->flags
5906                   & (SCB_PACKETIZED|SCB_ACTIVE)) == SCB_ACTIVE
5907                 && (scb->col_scb->hscb->control & TAG_ENB) != 0) {
5908
5909                 /*
5910                  * The SCB we might collide with on the next allocation
5911                  * is still active in a non-packetized, tagged, context.
5912                  * Put us on the SCB collision list.
5913                  */
5914                 ahd_add_col_list(ahd, scb,
5915                                  AHD_GET_SCB_COL_IDX(ahd, scb->col_scb));
5916         } else {
5917                 /*
5918                  * The SCB we might collide with on the next allocation
5919                  * is either active in a packetized context, or free.
5920                  * Since we can't collide, put this SCB on the generic
5921                  * free list.
5922                  */
5923                 LIST_INSERT_HEAD(&ahd->scb_data.any_dev_free_scb_list,
5924                                  scb, links.le);
5925         }
5926
5927         ahd_platform_scb_free(ahd, scb);
5928 }
5929
5930 void
5931 ahd_alloc_scbs(struct ahd_softc *ahd)
5932 {
5933         struct scb_data *scb_data;
5934         struct scb      *next_scb;
5935         struct hardware_scb *hscb;
5936         struct map_node *hscb_map;
5937         struct map_node *sg_map;
5938         struct map_node *sense_map;
5939         uint8_t         *segs;
5940         uint8_t         *sense_data;
5941         dma_addr_t       hscb_busaddr;
5942         dma_addr_t       sg_busaddr;
5943         dma_addr_t       sense_busaddr;
5944         int              newcount;
5945         int              i;
5946
5947         scb_data = &ahd->scb_data;
5948         if (scb_data->numscbs >= AHD_SCB_MAX_ALLOC)
5949                 /* Can't allocate any more */
5950                 return;
5951
5952         if (scb_data->scbs_left != 0) {
5953                 int offset;
5954
5955                 offset = (PAGE_SIZE / sizeof(*hscb)) - scb_data->scbs_left;
5956                 hscb_map = SLIST_FIRST(&scb_data->hscb_maps);
5957                 hscb = &((struct hardware_scb *)hscb_map->vaddr)[offset];
5958                 hscb_busaddr = hscb_map->physaddr + (offset * sizeof(*hscb));
5959         } else {
5960                 hscb_map = malloc(sizeof(*hscb_map), M_DEVBUF, M_NOWAIT);
5961
5962                 if (hscb_map == NULL)
5963                         return;
5964
5965                 /* Allocate the next batch of hardware SCBs */
5966                 if (ahd_dmamem_alloc(ahd, scb_data->hscb_dmat,
5967                                      (void **)&hscb_map->vaddr,
5968                                      BUS_DMA_NOWAIT, &hscb_map->dmamap) != 0) {
5969                         free(hscb_map, M_DEVBUF);
5970                         return;
5971                 }
5972
5973                 SLIST_INSERT_HEAD(&scb_data->hscb_maps, hscb_map, links);
5974
5975                 ahd_dmamap_load(ahd, scb_data->hscb_dmat, hscb_map->dmamap,
5976                                 hscb_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
5977                                 &hscb_map->physaddr, /*flags*/0);
5978
5979                 hscb = (struct hardware_scb *)hscb_map->vaddr;
5980                 hscb_busaddr = hscb_map->physaddr;
5981                 scb_data->scbs_left = PAGE_SIZE / sizeof(*hscb);
5982         }
5983
5984         if (scb_data->sgs_left != 0) {
5985                 int offset;
5986
5987                 offset = ((ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd))
5988                        - scb_data->sgs_left) * ahd_sglist_size(ahd);
5989                 sg_map = SLIST_FIRST(&scb_data->sg_maps);
5990                 segs = sg_map->vaddr + offset;
5991                 sg_busaddr = sg_map->physaddr + offset;
5992         } else {
5993                 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT);
5994
5995                 if (sg_map == NULL)
5996                         return;
5997
5998                 /* Allocate the next batch of S/G lists */
5999                 if (ahd_dmamem_alloc(ahd, scb_data->sg_dmat,
6000                                      (void **)&sg_map->vaddr,
6001                                      BUS_DMA_NOWAIT, &sg_map->dmamap) != 0) {
6002                         free(sg_map, M_DEVBUF);
6003                         return;
6004                 }
6005
6006                 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
6007
6008                 ahd_dmamap_load(ahd, scb_data->sg_dmat, sg_map->dmamap,
6009                                 sg_map->vaddr, ahd_sglist_allocsize(ahd),
6010                                 ahd_dmamap_cb, &sg_map->physaddr, /*flags*/0);
6011
6012                 segs = sg_map->vaddr;
6013                 sg_busaddr = sg_map->physaddr;
6014                 scb_data->sgs_left =
6015                     ahd_sglist_allocsize(ahd) / ahd_sglist_size(ahd);
6016 #ifdef AHD_DEBUG
6017                 if (ahd_debug & AHD_SHOW_MEMORY)
6018                         printf("Mapped SG data\n");
6019 #endif
6020         }
6021
6022         if (scb_data->sense_left != 0) {
6023                 int offset;
6024
6025                 offset = PAGE_SIZE - (AHD_SENSE_BUFSIZE * scb_data->sense_left);
6026                 sense_map = SLIST_FIRST(&scb_data->sense_maps);
6027                 sense_data = sense_map->vaddr + offset;
6028                 sense_busaddr = sense_map->physaddr + offset;
6029         } else {
6030                 sense_map = malloc(sizeof(*sense_map), M_DEVBUF, M_NOWAIT);
6031
6032                 if (sense_map == NULL)
6033                         return;
6034
6035                 /* Allocate the next batch of sense buffers */
6036                 if (ahd_dmamem_alloc(ahd, scb_data->sense_dmat,
6037                                      (void **)&sense_map->vaddr,
6038                                      BUS_DMA_NOWAIT, &sense_map->dmamap) != 0) {
6039                         free(sense_map, M_DEVBUF);
6040                         return;
6041                 }
6042
6043                 SLIST_INSERT_HEAD(&scb_data->sense_maps, sense_map, links);
6044
6045                 ahd_dmamap_load(ahd, scb_data->sense_dmat, sense_map->dmamap,
6046                                 sense_map->vaddr, PAGE_SIZE, ahd_dmamap_cb,
6047                                 &sense_map->physaddr, /*flags*/0);
6048
6049                 sense_data = sense_map->vaddr;
6050                 sense_busaddr = sense_map->physaddr;
6051                 scb_data->sense_left = PAGE_SIZE / AHD_SENSE_BUFSIZE;
6052 #ifdef AHD_DEBUG
6053                 if (ahd_debug & AHD_SHOW_MEMORY)
6054                         printf("Mapped sense data\n");
6055 #endif
6056         }
6057
6058         newcount = MIN(scb_data->sense_left, scb_data->scbs_left);
6059         newcount = MIN(newcount, scb_data->sgs_left);
6060         newcount = MIN(newcount, (AHD_SCB_MAX_ALLOC - scb_data->numscbs));
6061         for (i = 0; i < newcount; i++) {
6062                 struct scb_platform_data *pdata;
6063                 u_int col_tag;
6064 #ifndef __linux__
6065                 int error;
6066 #endif
6067
6068                 next_scb = (struct scb *)malloc(sizeof(*next_scb),
6069                                                 M_DEVBUF, M_NOWAIT);
6070                 if (next_scb == NULL)
6071                         break;
6072
6073                 pdata = (struct scb_platform_data *)malloc(sizeof(*pdata),
6074                                                            M_DEVBUF, M_NOWAIT);
6075                 if (pdata == NULL) {
6076                         free(next_scb, M_DEVBUF);
6077                         break;
6078                 }
6079                 next_scb->platform_data = pdata;
6080                 next_scb->hscb_map = hscb_map;
6081                 next_scb->sg_map = sg_map;
6082                 next_scb->sense_map = sense_map;
6083                 next_scb->sg_list = segs;
6084                 next_scb->sense_data = sense_data;
6085                 next_scb->sense_busaddr = sense_busaddr;
6086                 memset(hscb, 0, sizeof(*hscb));
6087                 next_scb->hscb = hscb;
6088                 hscb->hscb_busaddr = ahd_htole32(hscb_busaddr);
6089
6090                 /*
6091                  * The sequencer always starts with the second entry.
6092                  * The first entry is embedded in the scb.
6093                  */
6094                 next_scb->sg_list_busaddr = sg_busaddr;
6095                 if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
6096                         next_scb->sg_list_busaddr
6097                             += sizeof(struct ahd_dma64_seg);
6098                 else
6099                         next_scb->sg_list_busaddr += sizeof(struct ahd_dma_seg);
6100                 next_scb->ahd_softc = ahd;
6101                 next_scb->flags = SCB_FLAG_NONE;
6102 #ifndef __linux__
6103                 error = ahd_dmamap_create(ahd, ahd->buffer_dmat, /*flags*/0,
6104                                           &next_scb->dmamap);
6105                 if (error != 0) {
6106                         free(next_scb, M_DEVBUF);
6107                         free(pdata, M_DEVBUF);
6108                         break;
6109                 }
6110 #endif
6111                 next_scb->hscb->tag = ahd_htole16(scb_data->numscbs);
6112                 col_tag = scb_data->numscbs ^ 0x100;
6113                 next_scb->col_scb = ahd_find_scb_by_tag(ahd, col_tag);
6114                 if (next_scb->col_scb != NULL)
6115                         next_scb->col_scb->col_scb = next_scb;
6116                 ahd_free_scb(ahd, next_scb);
6117                 hscb++;
6118                 hscb_busaddr += sizeof(*hscb);
6119                 segs += ahd_sglist_size(ahd);
6120                 sg_busaddr += ahd_sglist_size(ahd);
6121                 sense_data += AHD_SENSE_BUFSIZE;
6122                 sense_busaddr += AHD_SENSE_BUFSIZE;
6123                 scb_data->numscbs++;
6124                 scb_data->sense_left--;
6125                 scb_data->scbs_left--;
6126                 scb_data->sgs_left--;
6127         }
6128 }
6129
6130 void
6131 ahd_controller_info(struct ahd_softc *ahd, char *buf)
6132 {
6133         const char *speed;
6134         const char *type;
6135         int len;
6136
6137         len = sprintf(buf, "%s: ", ahd_chip_names[ahd->chip & AHD_CHIPID_MASK]);
6138         buf += len;
6139
6140         speed = "Ultra320 ";
6141         if ((ahd->features & AHD_WIDE) != 0) {
6142                 type = "Wide ";
6143         } else {
6144                 type = "Single ";
6145         }
6146         len = sprintf(buf, "%s%sChannel %c, SCSI Id=%d, ",
6147                       speed, type, ahd->channel, ahd->our_id);
6148         buf += len;
6149
6150         sprintf(buf, "%s, %d SCBs", ahd->bus_description,
6151                 ahd->scb_data.maxhscbs);
6152 }
6153
6154 static const char *channel_strings[] = {
6155         "Primary Low",
6156         "Primary High",
6157         "Secondary Low", 
6158         "Secondary High"
6159 };
6160
6161 static const char *termstat_strings[] = {
6162         "Terminated Correctly",
6163         "Over Terminated",
6164         "Under Terminated",
6165         "Not Configured"
6166 };
6167
6168 /*
6169  * Start the board, ready for normal operation
6170  */
6171 int
6172 ahd_init(struct ahd_softc *ahd)
6173 {
6174         uint8_t         *next_vaddr;
6175         dma_addr_t       next_baddr;
6176         size_t           driver_data_size;
6177         int              i;
6178         int              error;
6179         u_int            warn_user;
6180         uint8_t          current_sensing;
6181         uint8_t          fstat;
6182
6183         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
6184
6185         ahd->stack_size = ahd_probe_stack_size(ahd);
6186         ahd->saved_stack = malloc(ahd->stack_size * sizeof(uint16_t),
6187                                   M_DEVBUF, M_NOWAIT);
6188         if (ahd->saved_stack == NULL)
6189                 return (ENOMEM);
6190
6191         /*
6192          * Verify that the compiler hasn't over-agressively
6193          * padded important structures.
6194          */
6195         if (sizeof(struct hardware_scb) != 64)
6196                 panic("Hardware SCB size is incorrect");
6197
6198 #ifdef AHD_DEBUG
6199         if ((ahd_debug & AHD_DEBUG_SEQUENCER) != 0)
6200                 ahd->flags |= AHD_SEQUENCER_DEBUG;
6201 #endif
6202
6203         /*
6204          * Default to allowing initiator operations.
6205          */
6206         ahd->flags |= AHD_INITIATORROLE;
6207
6208         /*
6209          * Only allow target mode features if this unit has them enabled.
6210          */
6211         if ((AHD_TMODE_ENABLE & (0x1 << ahd->unit)) == 0)
6212                 ahd->features &= ~AHD_TARGETMODE;
6213
6214 #ifndef __linux__
6215         /* DMA tag for mapping buffers into device visible space. */
6216         if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
6217                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
6218                                /*lowaddr*/ahd->flags & AHD_39BIT_ADDRESSING
6219                                         ? (dma_addr_t)0x7FFFFFFFFFULL
6220                                         : BUS_SPACE_MAXADDR_32BIT,
6221                                /*highaddr*/BUS_SPACE_MAXADDR,
6222                                /*filter*/NULL, /*filterarg*/NULL,
6223                                /*maxsize*/(AHD_NSEG - 1) * PAGE_SIZE,
6224                                /*nsegments*/AHD_NSEG,
6225                                /*maxsegsz*/AHD_MAXTRANSFER_SIZE,
6226                                /*flags*/BUS_DMA_ALLOCNOW,
6227                                &ahd->buffer_dmat) != 0) {
6228                 return (ENOMEM);
6229         }
6230 #endif
6231
6232         ahd->init_level++;
6233
6234         /*
6235          * DMA tag for our command fifos and other data in system memory
6236          * the card's sequencer must be able to access.  For initiator
6237          * roles, we need to allocate space for the qoutfifo.  When providing
6238          * for the target mode role, we must additionally provide space for
6239          * the incoming target command fifo.
6240          */
6241         driver_data_size = AHD_SCB_MAX * sizeof(*ahd->qoutfifo)
6242                          + sizeof(struct hardware_scb);
6243         if ((ahd->features & AHD_TARGETMODE) != 0)
6244                 driver_data_size += AHD_TMODE_CMDS * sizeof(struct target_cmd);
6245         if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0)
6246                 driver_data_size += PKT_OVERRUN_BUFSIZE;
6247         if (ahd_dma_tag_create(ahd, ahd->parent_dmat, /*alignment*/1,
6248                                /*boundary*/BUS_SPACE_MAXADDR_32BIT + 1,
6249                                /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
6250                                /*highaddr*/BUS_SPACE_MAXADDR,
6251                                /*filter*/NULL, /*filterarg*/NULL,
6252                                driver_data_size,
6253                                /*nsegments*/1,
6254                                /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
6255                                /*flags*/0, &ahd->shared_data_dmat) != 0) {
6256                 return (ENOMEM);
6257         }
6258
6259         ahd->init_level++;
6260
6261         /* Allocation of driver data */
6262         if (ahd_dmamem_alloc(ahd, ahd->shared_data_dmat,
6263                              (void **)&ahd->shared_data_map.vaddr,
6264                              BUS_DMA_NOWAIT,
6265                              &ahd->shared_data_map.dmamap) != 0) {
6266                 return (ENOMEM);
6267         }
6268
6269         ahd->init_level++;
6270
6271         /* And permanently map it in */
6272         ahd_dmamap_load(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
6273                         ahd->shared_data_map.vaddr, driver_data_size,
6274                         ahd_dmamap_cb, &ahd->shared_data_map.physaddr,
6275                         /*flags*/0);
6276         ahd->qoutfifo = (struct ahd_completion *)ahd->shared_data_map.vaddr;
6277         next_vaddr = (uint8_t *)&ahd->qoutfifo[AHD_QOUT_SIZE];
6278         next_baddr = ahd->shared_data_map.physaddr
6279                    + AHD_QOUT_SIZE*sizeof(struct ahd_completion);
6280         if ((ahd->features & AHD_TARGETMODE) != 0) {
6281                 ahd->targetcmds = (struct target_cmd *)next_vaddr;
6282                 next_vaddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
6283                 next_baddr += AHD_TMODE_CMDS * sizeof(struct target_cmd);
6284         }
6285
6286         if ((ahd->bugs & AHD_PKT_BITBUCKET_BUG) != 0) {
6287                 ahd->overrun_buf = next_vaddr;
6288                 next_vaddr += PKT_OVERRUN_BUFSIZE;
6289                 next_baddr += PKT_OVERRUN_BUFSIZE;
6290         }
6291
6292         /*
6293          * We need one SCB to serve as the "next SCB".  Since the
6294          * tag identifier in this SCB will never be used, there is
6295          * no point in using a valid HSCB tag from an SCB pulled from
6296          * the standard free pool.  So, we allocate this "sentinel"
6297          * specially from the DMA safe memory chunk used for the QOUTFIFO.
6298          */
6299         ahd->next_queued_hscb = (struct hardware_scb *)next_vaddr;
6300         ahd->next_queued_hscb_map = &ahd->shared_data_map;
6301         ahd->next_queued_hscb->hscb_busaddr = ahd_htole32(next_baddr);
6302
6303         ahd->init_level++;
6304
6305         /* Allocate SCB data now that buffer_dmat is initialized */
6306         if (ahd_init_scbdata(ahd) != 0)
6307                 return (ENOMEM);
6308
6309         if ((ahd->flags & AHD_INITIATORROLE) == 0)
6310                 ahd->flags &= ~AHD_RESET_BUS_A;
6311
6312         /*
6313          * Before committing these settings to the chip, give
6314          * the OSM one last chance to modify our configuration.
6315          */
6316         ahd_platform_init(ahd);
6317
6318         /* Bring up the chip. */
6319         ahd_chip_init(ahd);
6320
6321         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
6322
6323         if ((ahd->flags & AHD_CURRENT_SENSING) == 0)
6324                 goto init_done;
6325
6326         /*
6327          * Verify termination based on current draw and
6328          * warn user if the bus is over/under terminated.
6329          */
6330         error = ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL,
6331                                    CURSENSE_ENB);
6332         if (error != 0) {
6333                 printf("%s: current sensing timeout 1\n", ahd_name(ahd));
6334                 goto init_done;
6335         }
6336         for (i = 20, fstat = FLX_FSTAT_BUSY;
6337              (fstat & FLX_FSTAT_BUSY) != 0 && i; i--) {
6338                 error = ahd_read_flexport(ahd, FLXADDR_FLEXSTAT, &fstat);
6339                 if (error != 0) {
6340                         printf("%s: current sensing timeout 2\n",
6341                                ahd_name(ahd));
6342                         goto init_done;
6343                 }
6344         }
6345         if (i == 0) {
6346                 printf("%s: Timedout during current-sensing test\n",
6347                        ahd_name(ahd));
6348                 goto init_done;
6349         }
6350
6351         /* Latch Current Sensing status. */
6352         error = ahd_read_flexport(ahd, FLXADDR_CURRENT_STAT, &current_sensing);
6353         if (error != 0) {
6354                 printf("%s: current sensing timeout 3\n", ahd_name(ahd));
6355                 goto init_done;
6356         }
6357
6358         /* Diable current sensing. */
6359         ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
6360
6361 #ifdef AHD_DEBUG
6362         if ((ahd_debug & AHD_SHOW_TERMCTL) != 0) {
6363                 printf("%s: current_sensing == 0x%x\n",
6364                        ahd_name(ahd), current_sensing);
6365         }
6366 #endif
6367         warn_user = 0;
6368         for (i = 0; i < 4; i++, current_sensing >>= FLX_CSTAT_SHIFT) {
6369                 u_int term_stat;
6370
6371                 term_stat = (current_sensing & FLX_CSTAT_MASK);
6372                 switch (term_stat) {
6373                 case FLX_CSTAT_OVER:
6374                 case FLX_CSTAT_UNDER:
6375                         warn_user++;
6376                 case FLX_CSTAT_INVALID:
6377                 case FLX_CSTAT_OKAY:
6378                         if (warn_user == 0 && bootverbose == 0)
6379                                 break;
6380                         printf("%s: %s Channel %s\n", ahd_name(ahd),
6381                                channel_strings[i], termstat_strings[term_stat]);
6382                         break;
6383                 }
6384         }
6385         if (warn_user) {
6386                 printf("%s: WARNING. Termination is not configured correctly.\n"
6387                        "%s: WARNING. SCSI bus operations may FAIL.\n",
6388                        ahd_name(ahd), ahd_name(ahd));
6389         }
6390 init_done:
6391         ahd_restart(ahd);
6392         ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US,
6393                         ahd_stat_timer, ahd);
6394         return (0);
6395 }
6396
6397 /*
6398  * (Re)initialize chip state after a chip reset.
6399  */
6400 static void
6401 ahd_chip_init(struct ahd_softc *ahd)
6402 {
6403         uint32_t busaddr;
6404         u_int    sxfrctl1;
6405         u_int    scsiseq_template;
6406         u_int    wait;
6407         u_int    i;
6408         u_int    target;
6409
6410         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6411         /*
6412          * Take the LED out of diagnostic mode
6413          */
6414         ahd_outb(ahd, SBLKCTL, ahd_inb(ahd, SBLKCTL) & ~(DIAGLEDEN|DIAGLEDON));
6415
6416         /*
6417          * Return HS_MAILBOX to its default value.
6418          */
6419         ahd->hs_mailbox = 0;
6420         ahd_outb(ahd, HS_MAILBOX, 0);
6421
6422         /* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1. */
6423         ahd_outb(ahd, IOWNID, ahd->our_id);
6424         ahd_outb(ahd, TOWNID, ahd->our_id);
6425         sxfrctl1 = (ahd->flags & AHD_TERM_ENB_A) != 0 ? STPWEN : 0;
6426         sxfrctl1 |= (ahd->flags & AHD_SPCHK_ENB_A) != 0 ? ENSPCHK : 0;
6427         if ((ahd->bugs & AHD_LONG_SETIMO_BUG)
6428          && (ahd->seltime != STIMESEL_MIN)) {
6429                 /*
6430                  * The selection timer duration is twice as long
6431                  * as it should be.  Halve it by adding "1" to
6432                  * the user specified setting.
6433                  */
6434                 sxfrctl1 |= ahd->seltime + STIMESEL_BUG_ADJ;
6435         } else {
6436                 sxfrctl1 |= ahd->seltime;
6437         }
6438                 
6439         ahd_outb(ahd, SXFRCTL0, DFON);
6440         ahd_outb(ahd, SXFRCTL1, sxfrctl1|ahd->seltime|ENSTIMER|ACTNEGEN);
6441         ahd_outb(ahd, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
6442
6443         /*
6444          * Now that termination is set, wait for up
6445          * to 500ms for our transceivers to settle.  If
6446          * the adapter does not have a cable attached,
6447          * the transceivers may never settle, so don't
6448          * complain if we fail here.
6449          */
6450         for (wait = 10000;
6451              (ahd_inb(ahd, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
6452              wait--)
6453                 ahd_delay(100);
6454
6455         /* Clear any false bus resets due to the transceivers settling */
6456         ahd_outb(ahd, CLRSINT1, CLRSCSIRSTI);
6457         ahd_outb(ahd, CLRINT, CLRSCSIINT);
6458
6459         /* Initialize mode specific S/G state. */
6460         for (i = 0; i < 2; i++) {
6461                 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
6462                 ahd_outb(ahd, LONGJMP_ADDR + 1, INVALID_ADDR);
6463                 ahd_outb(ahd, SG_STATE, 0);
6464                 ahd_outb(ahd, CLRSEQINTSRC, 0xFF);
6465                 ahd_outb(ahd, SEQIMODE,
6466                          ENSAVEPTRS|ENCFG4DATA|ENCFG4ISTAT
6467                         |ENCFG4TSTAT|ENCFG4ICMD|ENCFG4TCMD);
6468         }
6469
6470         ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
6471         ahd_outb(ahd, DSCOMMAND0, ahd_inb(ahd, DSCOMMAND0)|MPARCKEN|CACHETHEN);
6472         ahd_outb(ahd, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75);
6473         ahd_outb(ahd, SIMODE0, ENIOERR|ENOVERRUN);
6474         ahd_outb(ahd, SIMODE3, ENNTRAMPERR|ENOSRAMPERR);
6475         if ((ahd->bugs & AHD_BUSFREEREV_BUG) != 0) {
6476                 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|AUTO_MSGOUT_DE);
6477         } else {
6478                 ahd_outb(ahd, OPTIONMODE, AUTOACKEN|BUSFREEREV|AUTO_MSGOUT_DE);
6479         }
6480         ahd_outb(ahd, SCSCHKN, CURRFIFODEF|WIDERESEN|SHVALIDSTDIS);
6481         if ((ahd->chip & AHD_BUS_MASK) == AHD_PCIX)
6482                 /*
6483                  * Do not issue a target abort when a split completion
6484                  * error occurs.  Let our PCIX interrupt handler deal
6485                  * with it instead. H2A4 Razor #625
6486                  */
6487                 ahd_outb(ahd, PCIXCTL, ahd_inb(ahd, PCIXCTL) | SPLTSTADIS);
6488
6489         if ((ahd->bugs & AHD_LQOOVERRUN_BUG) != 0)
6490                 ahd_outb(ahd, LQOSCSCTL, LQONOCHKOVER);
6491
6492         /*
6493          * Tweak IOCELL settings.
6494          */
6495         if ((ahd->flags & AHD_HP_BOARD) != 0) {
6496                 for (i = 0; i < NUMDSPS; i++) {
6497                         ahd_outb(ahd, DSPSELECT, i);
6498                         ahd_outb(ahd, WRTBIASCTL, WRTBIASCTL_HP_DEFAULT);
6499                 }
6500 #ifdef AHD_DEBUG
6501                 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6502                         printf("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd),
6503                                WRTBIASCTL_HP_DEFAULT);
6504 #endif
6505         }
6506         ahd_setup_iocell_workaround(ahd);
6507
6508         /*
6509          * Enable LQI Manager interrupts.
6510          */
6511         ahd_outb(ahd, LQIMODE1, ENLQIPHASE_LQ|ENLQIPHASE_NLQ|ENLIQABORT
6512                               | ENLQICRCI_LQ|ENLQICRCI_NLQ|ENLQIBADLQI
6513                               | ENLQIOVERI_LQ|ENLQIOVERI_NLQ);
6514         ahd_outb(ahd, LQOMODE0, ENLQOATNLQ|ENLQOATNPKT|ENLQOTCRC);
6515         /*
6516          * We choose to have the sequencer catch LQOPHCHGINPKT errors
6517          * manually for the command phase at the start of a packetized
6518          * selection case.  ENLQOBUSFREE should be made redundant by
6519          * the BUSFREE interrupt, but it seems that some LQOBUSFREE
6520          * events fail to assert the BUSFREE interrupt so we must
6521          * also enable LQOBUSFREE interrupts.
6522          */
6523         ahd_outb(ahd, LQOMODE1, ENLQOBUSFREE);
6524
6525         /*
6526          * Setup sequencer interrupt handlers.
6527          */
6528         ahd_outw(ahd, INTVEC1_ADDR, ahd_resolve_seqaddr(ahd, LABEL_seq_isr));
6529         ahd_outw(ahd, INTVEC2_ADDR, ahd_resolve_seqaddr(ahd, LABEL_timer_isr));
6530
6531         /*
6532          * Setup SCB Offset registers.
6533          */
6534         if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
6535                 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb,
6536                          pkt_long_lun));
6537         } else {
6538                 ahd_outb(ahd, LUNPTR, offsetof(struct hardware_scb, lun));
6539         }
6540         ahd_outb(ahd, CMDLENPTR, offsetof(struct hardware_scb, cdb_len));
6541         ahd_outb(ahd, ATTRPTR, offsetof(struct hardware_scb, task_attribute));
6542         ahd_outb(ahd, FLAGPTR, offsetof(struct hardware_scb, task_management));
6543         ahd_outb(ahd, CMDPTR, offsetof(struct hardware_scb,
6544                                        shared_data.idata.cdb));
6545         ahd_outb(ahd, QNEXTPTR,
6546                  offsetof(struct hardware_scb, next_hscb_busaddr));
6547         ahd_outb(ahd, ABRTBITPTR, MK_MESSAGE_BIT_OFFSET);
6548         ahd_outb(ahd, ABRTBYTEPTR, offsetof(struct hardware_scb, control));
6549         if ((ahd->bugs & AHD_PKT_LUN_BUG) != 0) {
6550                 ahd_outb(ahd, LUNLEN,
6551                          sizeof(ahd->next_queued_hscb->pkt_long_lun) - 1);
6552         } else {
6553                 ahd_outb(ahd, LUNLEN, LUNLEN_SINGLE_LEVEL_LUN);
6554         }
6555         ahd_outb(ahd, CDBLIMIT, SCB_CDB_LEN_PTR - 1);
6556         ahd_outb(ahd, MAXCMD, 0xFF);
6557         ahd_outb(ahd, SCBAUTOPTR,
6558                  AUSCBPTR_EN | offsetof(struct hardware_scb, tag));
6559
6560         /* We haven't been enabled for target mode yet. */
6561         ahd_outb(ahd, MULTARGID, 0);
6562         ahd_outb(ahd, MULTARGID + 1, 0);
6563
6564         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6565         /* Initialize the negotiation table. */
6566         if ((ahd->features & AHD_NEW_IOCELL_OPTS) == 0) {
6567                 /*
6568                  * Clear the spare bytes in the neg table to avoid
6569                  * spurious parity errors.
6570                  */
6571                 for (target = 0; target < AHD_NUM_TARGETS; target++) {
6572                         ahd_outb(ahd, NEGOADDR, target);
6573                         ahd_outb(ahd, ANNEXCOL, AHD_ANNEXCOL_PER_DEV0);
6574                         for (i = 0; i < AHD_NUM_PER_DEV_ANNEXCOLS; i++)
6575                                 ahd_outb(ahd, ANNEXDAT, 0);
6576                 }
6577         }
6578         for (target = 0; target < AHD_NUM_TARGETS; target++) {
6579                 struct   ahd_devinfo devinfo;
6580                 struct   ahd_initiator_tinfo *tinfo;
6581                 struct   ahd_tmode_tstate *tstate;
6582
6583                 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
6584                                             target, &tstate);
6585                 ahd_compile_devinfo(&devinfo, ahd->our_id,
6586                                     target, CAM_LUN_WILDCARD,
6587                                     'A', ROLE_INITIATOR);
6588                 ahd_update_neg_table(ahd, &devinfo, &tinfo->curr);
6589         }
6590
6591         ahd_outb(ahd, CLRSINT3, NTRAMPERR|OSRAMPERR);
6592         ahd_outb(ahd, CLRINT, CLRSCSIINT);
6593
6594 #ifdef NEEDS_MORE_TESTING
6595         /*
6596          * Always enable abort on incoming L_Qs if this feature is
6597          * supported.  We use this to catch invalid SCB references.
6598          */
6599         if ((ahd->bugs & AHD_ABORT_LQI_BUG) == 0)
6600                 ahd_outb(ahd, LQCTL1, ABORTPENDING);
6601         else
6602 #endif
6603                 ahd_outb(ahd, LQCTL1, 0);
6604
6605         /* All of our queues are empty */
6606         ahd->qoutfifonext = 0;
6607         ahd->qoutfifonext_valid_tag = QOUTFIFO_ENTRY_VALID;
6608         ahd_outb(ahd, QOUTFIFO_ENTRY_VALID_TAG, QOUTFIFO_ENTRY_VALID);
6609         for (i = 0; i < AHD_QOUT_SIZE; i++)
6610                 ahd->qoutfifo[i].valid_tag = 0;
6611         ahd_sync_qoutfifo(ahd, BUS_DMASYNC_PREREAD);
6612
6613         ahd->qinfifonext = 0;
6614         for (i = 0; i < AHD_QIN_SIZE; i++)
6615                 ahd->qinfifo[i] = SCB_LIST_NULL;
6616
6617         if ((ahd->features & AHD_TARGETMODE) != 0) {
6618                 /* All target command blocks start out invalid. */
6619                 for (i = 0; i < AHD_TMODE_CMDS; i++)
6620                         ahd->targetcmds[i].cmd_valid = 0;
6621                 ahd_sync_tqinfifo(ahd, BUS_DMASYNC_PREREAD);
6622                 ahd->tqinfifonext = 1;
6623                 ahd_outb(ahd, KERNEL_TQINPOS, ahd->tqinfifonext - 1);
6624                 ahd_outb(ahd, TQINPOS, ahd->tqinfifonext);
6625         }
6626
6627         /* Initialize Scratch Ram. */
6628         ahd_outb(ahd, SEQ_FLAGS, 0);
6629         ahd_outb(ahd, SEQ_FLAGS2, 0);
6630
6631         /* We don't have any waiting selections */
6632         ahd_outw(ahd, WAITING_TID_HEAD, SCB_LIST_NULL);
6633         ahd_outw(ahd, WAITING_TID_TAIL, SCB_LIST_NULL);
6634         ahd_outw(ahd, MK_MESSAGE_SCB, SCB_LIST_NULL);
6635         ahd_outw(ahd, MK_MESSAGE_SCSIID, 0xFF);
6636         for (i = 0; i < AHD_NUM_TARGETS; i++)
6637                 ahd_outw(ahd, WAITING_SCB_TAILS + (2 * i), SCB_LIST_NULL);
6638
6639         /*
6640          * Nobody is waiting to be DMAed into the QOUTFIFO.
6641          */
6642         ahd_outw(ahd, COMPLETE_SCB_HEAD, SCB_LIST_NULL);
6643         ahd_outw(ahd, COMPLETE_SCB_DMAINPROG_HEAD, SCB_LIST_NULL);
6644         ahd_outw(ahd, COMPLETE_DMA_SCB_HEAD, SCB_LIST_NULL);
6645         ahd_outw(ahd, COMPLETE_DMA_SCB_TAIL, SCB_LIST_NULL);
6646         ahd_outw(ahd, COMPLETE_ON_QFREEZE_HEAD, SCB_LIST_NULL);
6647
6648         /*
6649          * The Freeze Count is 0.
6650          */
6651         ahd->qfreeze_cnt = 0;
6652         ahd_outw(ahd, QFREEZE_COUNT, 0);
6653         ahd_outw(ahd, KERNEL_QFREEZE_COUNT, 0);
6654
6655         /*
6656          * Tell the sequencer where it can find our arrays in memory.
6657          */
6658         busaddr = ahd->shared_data_map.physaddr;
6659         ahd_outl(ahd, SHARED_DATA_ADDR, busaddr);
6660         ahd_outl(ahd, QOUTFIFO_NEXT_ADDR, busaddr);
6661
6662         /*
6663          * Setup the allowed SCSI Sequences based on operational mode.
6664          * If we are a target, we'll enable select in operations once
6665          * we've had a lun enabled.
6666          */
6667         scsiseq_template = ENAUTOATNP;
6668         if ((ahd->flags & AHD_INITIATORROLE) != 0)
6669                 scsiseq_template |= ENRSELI;
6670         ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq_template);
6671
6672         /* There are no busy SCBs yet. */
6673         for (target = 0; target < AHD_NUM_TARGETS; target++) {
6674                 int lun;
6675
6676                 for (lun = 0; lun < AHD_NUM_LUNS_NONPKT; lun++)
6677                         ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(target, 'A', lun));
6678         }
6679
6680         /*
6681          * Initialize the group code to command length table.
6682          * Vendor Unique codes are set to 0 so we only capture
6683          * the first byte of the cdb.  These can be overridden
6684          * when target mode is enabled.
6685          */
6686         ahd_outb(ahd, CMDSIZE_TABLE, 5);
6687         ahd_outb(ahd, CMDSIZE_TABLE + 1, 9);
6688         ahd_outb(ahd, CMDSIZE_TABLE + 2, 9);
6689         ahd_outb(ahd, CMDSIZE_TABLE + 3, 0);
6690         ahd_outb(ahd, CMDSIZE_TABLE + 4, 15);
6691         ahd_outb(ahd, CMDSIZE_TABLE + 5, 11);
6692         ahd_outb(ahd, CMDSIZE_TABLE + 6, 0);
6693         ahd_outb(ahd, CMDSIZE_TABLE + 7, 0);
6694                 
6695         /* Tell the sequencer of our initial queue positions */
6696         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
6697         ahd_outb(ahd, QOFF_CTLSTA, SCB_QSIZE_512);
6698         ahd->qinfifonext = 0;
6699         ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
6700         ahd_set_hescb_qoff(ahd, 0);
6701         ahd_set_snscb_qoff(ahd, 0);
6702         ahd_set_sescb_qoff(ahd, 0);
6703         ahd_set_sdscb_qoff(ahd, 0);
6704
6705         /*
6706          * Tell the sequencer which SCB will be the next one it receives.
6707          */
6708         busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
6709         ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
6710
6711         /*
6712          * Default to coalescing disabled.
6713          */
6714         ahd_outw(ahd, INT_COALESCING_CMDCOUNT, 0);
6715         ahd_outw(ahd, CMDS_PENDING, 0);
6716         ahd_update_coalescing_values(ahd, ahd->int_coalescing_timer,
6717                                      ahd->int_coalescing_maxcmds,
6718                                      ahd->int_coalescing_mincmds);
6719         ahd_enable_coalescing(ahd, FALSE);
6720
6721         ahd_loadseq(ahd);
6722         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
6723
6724         if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
6725                 u_int negodat3 = ahd_inb(ahd, NEGCONOPTS);
6726
6727                 negodat3 |= ENSLOWCRC;
6728                 ahd_outb(ahd, NEGCONOPTS, negodat3);
6729                 negodat3 = ahd_inb(ahd, NEGCONOPTS);
6730                 if (!(negodat3 & ENSLOWCRC))
6731                         printf("aic79xx: failed to set the SLOWCRC bit\n");
6732                 else
6733                         printf("aic79xx: SLOWCRC bit set\n");
6734         }
6735 }
6736
6737 /*
6738  * Setup default device and controller settings.
6739  * This should only be called if our probe has
6740  * determined that no configuration data is available.
6741  */
6742 int
6743 ahd_default_config(struct ahd_softc *ahd)
6744 {
6745         int     targ;
6746
6747         ahd->our_id = 7;
6748
6749         /*
6750          * Allocate a tstate to house information for our
6751          * initiator presence on the bus as well as the user
6752          * data for any target mode initiator.
6753          */
6754         if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
6755                 printf("%s: unable to allocate ahd_tmode_tstate.  "
6756                        "Failing attach\n", ahd_name(ahd));
6757                 return (ENOMEM);
6758         }
6759
6760         for (targ = 0; targ < AHD_NUM_TARGETS; targ++) {
6761                 struct   ahd_devinfo devinfo;
6762                 struct   ahd_initiator_tinfo *tinfo;
6763                 struct   ahd_tmode_tstate *tstate;
6764                 uint16_t target_mask;
6765
6766                 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
6767                                             targ, &tstate);
6768                 /*
6769                  * We support SPC2 and SPI4.
6770                  */
6771                 tinfo->user.protocol_version = 4;
6772                 tinfo->user.transport_version = 4;
6773
6774                 target_mask = 0x01 << targ;
6775                 ahd->user_discenable |= target_mask;
6776                 tstate->discenable |= target_mask;
6777                 ahd->user_tagenable |= target_mask;
6778 #ifdef AHD_FORCE_160
6779                 tinfo->user.period = AHD_SYNCRATE_DT;
6780 #else
6781                 tinfo->user.period = AHD_SYNCRATE_160;
6782 #endif
6783                 tinfo->user.offset = MAX_OFFSET;
6784                 tinfo->user.ppr_options = MSG_EXT_PPR_RD_STRM
6785                                         | MSG_EXT_PPR_WR_FLOW
6786                                         | MSG_EXT_PPR_HOLD_MCS
6787                                         | MSG_EXT_PPR_IU_REQ
6788                                         | MSG_EXT_PPR_QAS_REQ
6789                                         | MSG_EXT_PPR_DT_REQ;
6790                 if ((ahd->features & AHD_RTI) != 0)
6791                         tinfo->user.ppr_options |= MSG_EXT_PPR_RTI;
6792
6793                 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
6794
6795                 /*
6796                  * Start out Async/Narrow/Untagged and with
6797                  * conservative protocol support.
6798                  */
6799                 tinfo->goal.protocol_version = 2;
6800                 tinfo->goal.transport_version = 2;
6801                 tinfo->curr.protocol_version = 2;
6802                 tinfo->curr.transport_version = 2;
6803                 ahd_compile_devinfo(&devinfo, ahd->our_id,
6804                                     targ, CAM_LUN_WILDCARD,
6805                                     'A', ROLE_INITIATOR);
6806                 tstate->tagenable &= ~target_mask;
6807                 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
6808                               AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
6809                 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
6810                                  /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
6811                                  /*paused*/TRUE);
6812         }
6813         return (0);
6814 }
6815
6816 /*
6817  * Parse device configuration information.
6818  */
6819 int
6820 ahd_parse_cfgdata(struct ahd_softc *ahd, struct seeprom_config *sc)
6821 {
6822         int targ;
6823         int max_targ;
6824
6825         max_targ = sc->max_targets & CFMAXTARG;
6826         ahd->our_id = sc->brtime_id & CFSCSIID;
6827
6828         /*
6829          * Allocate a tstate to house information for our
6830          * initiator presence on the bus as well as the user
6831          * data for any target mode initiator.
6832          */
6833         if (ahd_alloc_tstate(ahd, ahd->our_id, 'A') == NULL) {
6834                 printf("%s: unable to allocate ahd_tmode_tstate.  "
6835                        "Failing attach\n", ahd_name(ahd));
6836                 return (ENOMEM);
6837         }
6838
6839         for (targ = 0; targ < max_targ; targ++) {
6840                 struct   ahd_devinfo devinfo;
6841                 struct   ahd_initiator_tinfo *tinfo;
6842                 struct   ahd_transinfo *user_tinfo;
6843                 struct   ahd_tmode_tstate *tstate;
6844                 uint16_t target_mask;
6845
6846                 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
6847                                             targ, &tstate);
6848                 user_tinfo = &tinfo->user;
6849
6850                 /*
6851                  * We support SPC2 and SPI4.
6852                  */
6853                 tinfo->user.protocol_version = 4;
6854                 tinfo->user.transport_version = 4;
6855
6856                 target_mask = 0x01 << targ;
6857                 ahd->user_discenable &= ~target_mask;
6858                 tstate->discenable &= ~target_mask;
6859                 ahd->user_tagenable &= ~target_mask;
6860                 if (sc->device_flags[targ] & CFDISC) {
6861                         tstate->discenable |= target_mask;
6862                         ahd->user_discenable |= target_mask;
6863                         ahd->user_tagenable |= target_mask;
6864                 } else {
6865                         /*
6866                          * Cannot be packetized without disconnection.
6867                          */
6868                         sc->device_flags[targ] &= ~CFPACKETIZED;
6869                 }
6870
6871                 user_tinfo->ppr_options = 0;
6872                 user_tinfo->period = (sc->device_flags[targ] & CFXFER);
6873                 if (user_tinfo->period < CFXFER_ASYNC) {
6874                         if (user_tinfo->period <= AHD_PERIOD_10MHz)
6875                                 user_tinfo->ppr_options |= MSG_EXT_PPR_DT_REQ;
6876                         user_tinfo->offset = MAX_OFFSET;
6877                 } else  {
6878                         user_tinfo->offset = 0;
6879                         user_tinfo->period = AHD_ASYNC_XFER_PERIOD;
6880                 }
6881 #ifdef AHD_FORCE_160
6882                 if (user_tinfo->period <= AHD_SYNCRATE_160)
6883                         user_tinfo->period = AHD_SYNCRATE_DT;
6884 #endif
6885
6886                 if ((sc->device_flags[targ] & CFPACKETIZED) != 0) {
6887                         user_tinfo->ppr_options |= MSG_EXT_PPR_RD_STRM
6888                                                 |  MSG_EXT_PPR_WR_FLOW
6889                                                 |  MSG_EXT_PPR_HOLD_MCS
6890                                                 |  MSG_EXT_PPR_IU_REQ;
6891                         if ((ahd->features & AHD_RTI) != 0)
6892                                 user_tinfo->ppr_options |= MSG_EXT_PPR_RTI;
6893                 }
6894
6895                 if ((sc->device_flags[targ] & CFQAS) != 0)
6896                         user_tinfo->ppr_options |= MSG_EXT_PPR_QAS_REQ;
6897
6898                 if ((sc->device_flags[targ] & CFWIDEB) != 0)
6899                         user_tinfo->width = MSG_EXT_WDTR_BUS_16_BIT;
6900                 else
6901                         user_tinfo->width = MSG_EXT_WDTR_BUS_8_BIT;
6902 #ifdef AHD_DEBUG
6903                 if ((ahd_debug & AHD_SHOW_MISC) != 0)
6904                         printf("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width,
6905                                user_tinfo->period, user_tinfo->offset,
6906                                user_tinfo->ppr_options);
6907 #endif
6908                 /*
6909                  * Start out Async/Narrow/Untagged and with
6910                  * conservative protocol support.
6911                  */
6912                 tstate->tagenable &= ~target_mask;
6913                 tinfo->goal.protocol_version = 2;
6914                 tinfo->goal.transport_version = 2;
6915                 tinfo->curr.protocol_version = 2;
6916                 tinfo->curr.transport_version = 2;
6917                 ahd_compile_devinfo(&devinfo, ahd->our_id,
6918                                     targ, CAM_LUN_WILDCARD,
6919                                     'A', ROLE_INITIATOR);
6920                 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
6921                               AHD_TRANS_CUR|AHD_TRANS_GOAL, /*paused*/TRUE);
6922                 ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
6923                                  /*ppr_options*/0, AHD_TRANS_CUR|AHD_TRANS_GOAL,
6924                                  /*paused*/TRUE);
6925         }
6926
6927         ahd->flags &= ~AHD_SPCHK_ENB_A;
6928         if (sc->bios_control & CFSPARITY)
6929                 ahd->flags |= AHD_SPCHK_ENB_A;
6930
6931         ahd->flags &= ~AHD_RESET_BUS_A;
6932         if (sc->bios_control & CFRESETB)
6933                 ahd->flags |= AHD_RESET_BUS_A;
6934
6935         ahd->flags &= ~AHD_EXTENDED_TRANS_A;
6936         if (sc->bios_control & CFEXTEND)
6937                 ahd->flags |= AHD_EXTENDED_TRANS_A;
6938
6939         ahd->flags &= ~AHD_BIOS_ENABLED;
6940         if ((sc->bios_control & CFBIOSSTATE) == CFBS_ENABLED)
6941                 ahd->flags |= AHD_BIOS_ENABLED;
6942
6943         ahd->flags &= ~AHD_STPWLEVEL_A;
6944         if ((sc->adapter_control & CFSTPWLEVEL) != 0)
6945                 ahd->flags |= AHD_STPWLEVEL_A;
6946
6947         return (0);
6948 }
6949
6950 /*
6951  * Parse device configuration information.
6952  */
6953 int
6954 ahd_parse_vpddata(struct ahd_softc *ahd, struct vpd_config *vpd)
6955 {
6956         int error;
6957
6958         error = ahd_verify_vpd_cksum(vpd);
6959         if (error == 0)
6960                 return (EINVAL);
6961         if ((vpd->bios_flags & VPDBOOTHOST) != 0)
6962                 ahd->flags |= AHD_BOOT_CHANNEL;
6963         return (0);
6964 }
6965
6966 void
6967 ahd_intr_enable(struct ahd_softc *ahd, int enable)
6968 {
6969         u_int hcntrl;
6970
6971         hcntrl = ahd_inb(ahd, HCNTRL);
6972         hcntrl &= ~INTEN;
6973         ahd->pause &= ~INTEN;
6974         ahd->unpause &= ~INTEN;
6975         if (enable) {
6976                 hcntrl |= INTEN;
6977                 ahd->pause |= INTEN;
6978                 ahd->unpause |= INTEN;
6979         }
6980         ahd_outb(ahd, HCNTRL, hcntrl);
6981 }
6982
6983 void
6984 ahd_update_coalescing_values(struct ahd_softc *ahd, u_int timer, u_int maxcmds,
6985                              u_int mincmds)
6986 {
6987         if (timer > AHD_TIMER_MAX_US)
6988                 timer = AHD_TIMER_MAX_US;
6989         ahd->int_coalescing_timer = timer;
6990
6991         if (maxcmds > AHD_INT_COALESCING_MAXCMDS_MAX)
6992                 maxcmds = AHD_INT_COALESCING_MAXCMDS_MAX;
6993         if (mincmds > AHD_INT_COALESCING_MINCMDS_MAX)
6994                 mincmds = AHD_INT_COALESCING_MINCMDS_MAX;
6995         ahd->int_coalescing_maxcmds = maxcmds;
6996         ahd_outw(ahd, INT_COALESCING_TIMER, timer / AHD_TIMER_US_PER_TICK);
6997         ahd_outb(ahd, INT_COALESCING_MAXCMDS, -maxcmds);
6998         ahd_outb(ahd, INT_COALESCING_MINCMDS, -mincmds);
6999 }
7000
7001 void
7002 ahd_enable_coalescing(struct ahd_softc *ahd, int enable)
7003 {
7004
7005         ahd->hs_mailbox &= ~ENINT_COALESCE;
7006         if (enable)
7007                 ahd->hs_mailbox |= ENINT_COALESCE;
7008         ahd_outb(ahd, HS_MAILBOX, ahd->hs_mailbox);
7009         ahd_flush_device_writes(ahd);
7010         ahd_run_qoutfifo(ahd);
7011 }
7012
7013 /*
7014  * Ensure that the card is paused in a location
7015  * outside of all critical sections and that all
7016  * pending work is completed prior to returning.
7017  * This routine should only be called from outside
7018  * an interrupt context.
7019  */
7020 void
7021 ahd_pause_and_flushwork(struct ahd_softc *ahd)
7022 {
7023         u_int intstat;
7024         u_int maxloops;
7025
7026         maxloops = 1000;
7027         ahd->flags |= AHD_ALL_INTERRUPTS;
7028         ahd_pause(ahd);
7029         /*
7030          * Freeze the outgoing selections.  We do this only
7031          * until we are safely paused without further selections
7032          * pending.
7033          */
7034         ahd->qfreeze_cnt--;
7035         ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
7036         ahd_outb(ahd, SEQ_FLAGS2, ahd_inb(ahd, SEQ_FLAGS2) | SELECTOUT_QFROZEN);
7037         do {
7038
7039                 ahd_unpause(ahd);
7040                 /*
7041                  * Give the sequencer some time to service
7042                  * any active selections.
7043                  */
7044                 ahd_delay(500);
7045
7046                 ahd_intr(ahd);
7047                 ahd_pause(ahd);
7048                 intstat = ahd_inb(ahd, INTSTAT);
7049                 if ((intstat & INT_PEND) == 0) {
7050                         ahd_clear_critical_section(ahd);
7051                         intstat = ahd_inb(ahd, INTSTAT);
7052                 }
7053         } while (--maxloops
7054               && (intstat != 0xFF || (ahd->features & AHD_REMOVABLE) == 0)
7055               && ((intstat & INT_PEND) != 0
7056                || (ahd_inb(ahd, SCSISEQ0) & ENSELO) != 0
7057                || (ahd_inb(ahd, SSTAT0) & (SELDO|SELINGO)) != 0));
7058
7059         if (maxloops == 0) {
7060                 printf("Infinite interrupt loop, INTSTAT = %x",
7061                       ahd_inb(ahd, INTSTAT));
7062         }
7063         ahd->qfreeze_cnt++;
7064         ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
7065
7066         ahd_flush_qoutfifo(ahd);
7067
7068         ahd->flags &= ~AHD_ALL_INTERRUPTS;
7069 }
7070
7071 int
7072 ahd_suspend(struct ahd_softc *ahd)
7073 {
7074
7075         ahd_pause_and_flushwork(ahd);
7076
7077         if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
7078                 ahd_unpause(ahd);
7079                 return (EBUSY);
7080         }
7081         ahd_shutdown(ahd);
7082         return (0);
7083 }
7084
7085 int
7086 ahd_resume(struct ahd_softc *ahd)
7087 {
7088
7089         ahd_reset(ahd, /*reinit*/TRUE);
7090         ahd_intr_enable(ahd, TRUE); 
7091         ahd_restart(ahd);
7092         return (0);
7093 }
7094
7095 /************************** Busy Target Table *********************************/
7096 /*
7097  * Set SCBPTR to the SCB that contains the busy
7098  * table entry for TCL.  Return the offset into
7099  * the SCB that contains the entry for TCL.
7100  * saved_scbid is dereferenced and set to the
7101  * scbid that should be restored once manipualtion
7102  * of the TCL entry is complete.
7103  */
7104 static __inline u_int
7105 ahd_index_busy_tcl(struct ahd_softc *ahd, u_int *saved_scbid, u_int tcl)
7106 {
7107         /*
7108          * Index to the SCB that contains the busy entry.
7109          */
7110         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7111         *saved_scbid = ahd_get_scbptr(ahd);
7112         ahd_set_scbptr(ahd, TCL_LUN(tcl)
7113                      | ((TCL_TARGET_OFFSET(tcl) & 0xC) << 4));
7114
7115         /*
7116          * And now calculate the SCB offset to the entry.
7117          * Each entry is 2 bytes wide, hence the
7118          * multiplication by 2.
7119          */
7120         return (((TCL_TARGET_OFFSET(tcl) & 0x3) << 1) + SCB_DISCONNECTED_LISTS);
7121 }
7122
7123 /*
7124  * Return the untagged transaction id for a given target/channel lun.
7125  */
7126 u_int
7127 ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl)
7128 {
7129         u_int scbid;
7130         u_int scb_offset;
7131         u_int saved_scbptr;
7132                 
7133         scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
7134         scbid = ahd_inw_scbram(ahd, scb_offset);
7135         ahd_set_scbptr(ahd, saved_scbptr);
7136         return (scbid);
7137 }
7138
7139 void
7140 ahd_busy_tcl(struct ahd_softc *ahd, u_int tcl, u_int scbid)
7141 {
7142         u_int scb_offset;
7143         u_int saved_scbptr;
7144                 
7145         scb_offset = ahd_index_busy_tcl(ahd, &saved_scbptr, tcl);
7146         ahd_outw(ahd, scb_offset, scbid);
7147         ahd_set_scbptr(ahd, saved_scbptr);
7148 }
7149
7150 /************************** SCB and SCB queue management **********************/
7151 int
7152 ahd_match_scb(struct ahd_softc *ahd, struct scb *scb, int target,
7153               char channel, int lun, u_int tag, role_t role)
7154 {
7155         int targ = SCB_GET_TARGET(ahd, scb);
7156         char chan = SCB_GET_CHANNEL(ahd, scb);
7157         int slun = SCB_GET_LUN(scb);
7158         int match;
7159
7160         match = ((chan == channel) || (channel == ALL_CHANNELS));
7161         if (match != 0)
7162                 match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
7163         if (match != 0)
7164                 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
7165         if (match != 0) {
7166 #ifdef AHD_TARGET_MODE
7167                 int group;
7168
7169                 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
7170                 if (role == ROLE_INITIATOR) {
7171                         match = (group != XPT_FC_GROUP_TMODE)
7172                               && ((tag == SCB_GET_TAG(scb))
7173                                || (tag == SCB_LIST_NULL));
7174                 } else if (role == ROLE_TARGET) {
7175                         match = (group == XPT_FC_GROUP_TMODE)
7176                               && ((tag == scb->io_ctx->csio.tag_id)
7177                                || (tag == SCB_LIST_NULL));
7178                 }
7179 #else /* !AHD_TARGET_MODE */
7180                 match = ((tag == SCB_GET_TAG(scb)) || (tag == SCB_LIST_NULL));
7181 #endif /* AHD_TARGET_MODE */
7182         }
7183
7184         return match;
7185 }
7186
7187 void
7188 ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
7189 {
7190         int     target;
7191         char    channel;
7192         int     lun;
7193
7194         target = SCB_GET_TARGET(ahd, scb);
7195         lun = SCB_GET_LUN(scb);
7196         channel = SCB_GET_CHANNEL(ahd, scb);
7197         
7198         ahd_search_qinfifo(ahd, target, channel, lun,
7199                            /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
7200                            CAM_REQUEUE_REQ, SEARCH_COMPLETE);
7201
7202         ahd_platform_freeze_devq(ahd, scb);
7203 }
7204
7205 void
7206 ahd_qinfifo_requeue_tail(struct ahd_softc *ahd, struct scb *scb)
7207 {
7208         struct scb      *prev_scb;
7209         ahd_mode_state   saved_modes;
7210
7211         saved_modes = ahd_save_modes(ahd);
7212         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7213         prev_scb = NULL;
7214         if (ahd_qinfifo_count(ahd) != 0) {
7215                 u_int prev_tag;
7216                 u_int prev_pos;
7217
7218                 prev_pos = AHD_QIN_WRAP(ahd->qinfifonext - 1);
7219                 prev_tag = ahd->qinfifo[prev_pos];
7220                 prev_scb = ahd_lookup_scb(ahd, prev_tag);
7221         }
7222         ahd_qinfifo_requeue(ahd, prev_scb, scb);
7223         ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
7224         ahd_restore_modes(ahd, saved_modes);
7225 }
7226
7227 static void
7228 ahd_qinfifo_requeue(struct ahd_softc *ahd, struct scb *prev_scb,
7229                     struct scb *scb)
7230 {
7231         if (prev_scb == NULL) {
7232                 uint32_t busaddr;
7233
7234                 busaddr = ahd_le32toh(scb->hscb->hscb_busaddr);
7235                 ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
7236         } else {
7237                 prev_scb->hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
7238                 ahd_sync_scb(ahd, prev_scb, 
7239                              BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
7240         }
7241         ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
7242         ahd->qinfifonext++;
7243         scb->hscb->next_hscb_busaddr = ahd->next_queued_hscb->hscb_busaddr;
7244         ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
7245 }
7246
7247 static int
7248 ahd_qinfifo_count(struct ahd_softc *ahd)
7249 {
7250         u_int qinpos;
7251         u_int wrap_qinpos;
7252         u_int wrap_qinfifonext;
7253
7254         AHD_ASSERT_MODES(ahd, AHD_MODE_CCHAN_MSK, AHD_MODE_CCHAN_MSK);
7255         qinpos = ahd_get_snscb_qoff(ahd);
7256         wrap_qinpos = AHD_QIN_WRAP(qinpos);
7257         wrap_qinfifonext = AHD_QIN_WRAP(ahd->qinfifonext);
7258         if (wrap_qinfifonext >= wrap_qinpos)
7259                 return (wrap_qinfifonext - wrap_qinpos);
7260         else
7261                 return (wrap_qinfifonext
7262                       + NUM_ELEMENTS(ahd->qinfifo) - wrap_qinpos);
7263 }
7264
7265 void
7266 ahd_reset_cmds_pending(struct ahd_softc *ahd)
7267 {
7268         struct          scb *scb;
7269         ahd_mode_state  saved_modes;
7270         u_int           pending_cmds;
7271
7272         saved_modes = ahd_save_modes(ahd);
7273         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7274
7275         /*
7276          * Don't count any commands as outstanding that the
7277          * sequencer has already marked for completion.
7278          */
7279         ahd_flush_qoutfifo(ahd);
7280
7281         pending_cmds = 0;
7282         LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
7283                 pending_cmds++;
7284         }
7285         ahd_outw(ahd, CMDS_PENDING, pending_cmds - ahd_qinfifo_count(ahd));
7286         ahd_restore_modes(ahd, saved_modes);
7287         ahd->flags &= ~AHD_UPDATE_PEND_CMDS;
7288 }
7289
7290 void
7291 ahd_done_with_status(struct ahd_softc *ahd, struct scb *scb, uint32_t status)
7292 {
7293         cam_status ostat;
7294         cam_status cstat;
7295
7296         ostat = ahd_get_transaction_status(scb);
7297         if (ostat == CAM_REQ_INPROG)
7298                 ahd_set_transaction_status(scb, status);
7299         cstat = ahd_get_transaction_status(scb);
7300         if (cstat != CAM_REQ_CMP)
7301                 ahd_freeze_scb(scb);
7302         ahd_done(ahd, scb);
7303 }
7304
7305 int
7306 ahd_search_qinfifo(struct ahd_softc *ahd, int target, char channel,
7307                    int lun, u_int tag, role_t role, uint32_t status,
7308                    ahd_search_action action)
7309 {
7310         struct scb      *scb;
7311         struct scb      *mk_msg_scb;
7312         struct scb      *prev_scb;
7313         ahd_mode_state   saved_modes;
7314         u_int            qinstart;
7315         u_int            qinpos;
7316         u_int            qintail;
7317         u_int            tid_next;
7318         u_int            tid_prev;
7319         u_int            scbid;
7320         u_int            seq_flags2;
7321         u_int            savedscbptr;
7322         uint32_t         busaddr;
7323         int              found;
7324         int              targets;
7325
7326         /* Must be in CCHAN mode */
7327         saved_modes = ahd_save_modes(ahd);
7328         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
7329
7330         /*
7331          * Halt any pending SCB DMA.  The sequencer will reinitiate
7332          * this dma if the qinfifo is not empty once we unpause.
7333          */
7334         if ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN|CCSCBDIR))
7335          == (CCARREN|CCSCBEN|CCSCBDIR)) {
7336                 ahd_outb(ahd, CCSCBCTL,
7337                          ahd_inb(ahd, CCSCBCTL) & ~(CCARREN|CCSCBEN));
7338                 while ((ahd_inb(ahd, CCSCBCTL) & (CCARREN|CCSCBEN)) != 0)
7339                         ;
7340         }
7341         /* Determine sequencer's position in the qinfifo. */
7342         qintail = AHD_QIN_WRAP(ahd->qinfifonext);
7343         qinstart = ahd_get_snscb_qoff(ahd);
7344         qinpos = AHD_QIN_WRAP(qinstart);
7345         found = 0;
7346         prev_scb = NULL;
7347
7348         if (action == SEARCH_PRINT) {
7349                 printf("qinstart = %d qinfifonext = %d\nQINFIFO:",
7350                        qinstart, ahd->qinfifonext);
7351         }
7352
7353         /*
7354          * Start with an empty queue.  Entries that are not chosen
7355          * for removal will be re-added to the queue as we go.
7356          */
7357         ahd->qinfifonext = qinstart;
7358         busaddr = ahd_le32toh(ahd->next_queued_hscb->hscb_busaddr);
7359         ahd_outl(ahd, NEXT_QUEUED_SCB_ADDR, busaddr);
7360
7361         while (qinpos != qintail) {
7362                 scb = ahd_lookup_scb(ahd, ahd->qinfifo[qinpos]);
7363                 if (scb == NULL) {
7364                         printf("qinpos = %d, SCB index = %d\n",
7365                                 qinpos, ahd->qinfifo[qinpos]);
7366                         panic("Loop 1\n");
7367                 }
7368
7369                 if (ahd_match_scb(ahd, scb, target, channel, lun, tag, role)) {
7370                         /*
7371                          * We found an scb that needs to be acted on.
7372                          */
7373                         found++;
7374                         switch (action) {
7375                         case SEARCH_COMPLETE:
7376                                 if ((scb->flags & SCB_ACTIVE) == 0)
7377                                         printf("Inactive SCB in qinfifo\n");
7378                                 ahd_done_with_status(ahd, scb, status);
7379                                 /* FALLTHROUGH */
7380                         case SEARCH_REMOVE:
7381                                 break;
7382                         case SEARCH_PRINT:
7383                                 printf(" 0x%x", ahd->qinfifo[qinpos]);
7384                                 /* FALLTHROUGH */
7385                         case SEARCH_COUNT:
7386                                 ahd_qinfifo_requeue(ahd, prev_scb, scb);
7387                                 prev_scb = scb;
7388                                 break;
7389                         }
7390                 } else {
7391                         ahd_qinfifo_requeue(ahd, prev_scb, scb);
7392                         prev_scb = scb;
7393                 }
7394                 qinpos = AHD_QIN_WRAP(qinpos+1);
7395         }
7396
7397         ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
7398
7399         if (action == SEARCH_PRINT)
7400                 printf("\nWAITING_TID_QUEUES:\n");
7401
7402         /*
7403          * Search waiting for selection lists.  We traverse the
7404          * list of "their ids" waiting for selection and, if
7405          * appropriate, traverse the SCBs of each "their id"
7406          * looking for matches.
7407          */
7408         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7409         seq_flags2 = ahd_inb(ahd, SEQ_FLAGS2);
7410         if ((seq_flags2 & PENDING_MK_MESSAGE) != 0) {
7411                 scbid = ahd_inw(ahd, MK_MESSAGE_SCB);
7412                 mk_msg_scb = ahd_lookup_scb(ahd, scbid);
7413         } else
7414                 mk_msg_scb = NULL;
7415         savedscbptr = ahd_get_scbptr(ahd);
7416         tid_next = ahd_inw(ahd, WAITING_TID_HEAD);
7417         tid_prev = SCB_LIST_NULL;
7418         targets = 0;
7419         for (scbid = tid_next; !SCBID_IS_NULL(scbid); scbid = tid_next) {
7420                 u_int tid_head;
7421                 u_int tid_tail;
7422
7423                 targets++;
7424                 if (targets > AHD_NUM_TARGETS)
7425                         panic("TID LIST LOOP");
7426
7427                 if (scbid >= ahd->scb_data.numscbs) {
7428                         printf("%s: Waiting TID List inconsistency. "
7429                                "SCB index == 0x%x, yet numscbs == 0x%x.",
7430                                ahd_name(ahd), scbid, ahd->scb_data.numscbs);
7431                         ahd_dump_card_state(ahd);
7432                         panic("for safety");
7433                 }
7434                 scb = ahd_lookup_scb(ahd, scbid);
7435                 if (scb == NULL) {
7436                         printf("%s: SCB = 0x%x Not Active!\n",
7437                                ahd_name(ahd), scbid);
7438                         panic("Waiting TID List traversal\n");
7439                 }
7440                 ahd_set_scbptr(ahd, scbid);
7441                 tid_next = ahd_inw_scbram(ahd, SCB_NEXT2);
7442                 if (ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
7443                                   SCB_LIST_NULL, ROLE_UNKNOWN) == 0) {
7444                         tid_prev = scbid;
7445                         continue;
7446                 }
7447
7448                 /*
7449                  * We found a list of scbs that needs to be searched.
7450                  */
7451                 if (action == SEARCH_PRINT)
7452                         printf("       %d ( ", SCB_GET_TARGET(ahd, scb));
7453                 tid_head = scbid;
7454                 found += ahd_search_scb_list(ahd, target, channel,
7455                                              lun, tag, role, status,
7456                                              action, &tid_head, &tid_tail,
7457                                              SCB_GET_TARGET(ahd, scb));
7458                 /*
7459                  * Check any MK_MESSAGE SCB that is still waiting to
7460                  * enter this target's waiting for selection queue.
7461                  */
7462                 if (mk_msg_scb != NULL
7463                  && ahd_match_scb(ahd, mk_msg_scb, target, channel,
7464                                   lun, tag, role)) {
7465
7466                         /*
7467                          * We found an scb that needs to be acted on.
7468                          */
7469                         found++;
7470                         switch (action) {
7471                         case SEARCH_COMPLETE:
7472                                 if ((mk_msg_scb->flags & SCB_ACTIVE) == 0)
7473                                         printf("Inactive SCB pending MK_MSG\n");
7474                                 ahd_done_with_status(ahd, mk_msg_scb, status);
7475                                 /* FALLTHROUGH */
7476                         case SEARCH_REMOVE:
7477                         {
7478                                 u_int tail_offset;
7479
7480                                 printf("Removing MK_MSG scb\n");
7481
7482                                 /*
7483                                  * Reset our tail to the tail of the
7484                                  * main per-target list.
7485                                  */
7486                                 tail_offset = WAITING_SCB_TAILS
7487                                     + (2 * SCB_GET_TARGET(ahd, mk_msg_scb));
7488                                 ahd_outw(ahd, tail_offset, tid_tail);
7489
7490                                 seq_flags2 &= ~PENDING_MK_MESSAGE;
7491                                 ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
7492                                 ahd_outw(ahd, CMDS_PENDING,
7493                                          ahd_inw(ahd, CMDS_PENDING)-1);
7494                                 mk_msg_scb = NULL;
7495                                 break;
7496                         }
7497                         case SEARCH_PRINT:
7498                                 printf(" 0x%x", SCB_GET_TAG(scb));
7499                                 /* FALLTHROUGH */
7500                         case SEARCH_COUNT:
7501                                 break;
7502                         }
7503                 }
7504
7505                 if (mk_msg_scb != NULL
7506                  && SCBID_IS_NULL(tid_head)
7507                  && ahd_match_scb(ahd, scb, target, channel, CAM_LUN_WILDCARD,
7508                                   SCB_LIST_NULL, ROLE_UNKNOWN)) {
7509
7510                         /*
7511                          * When removing the last SCB for a target
7512                          * queue with a pending MK_MESSAGE scb, we
7513                          * must queue the MK_MESSAGE scb.
7514                          */
7515                         printf("Queueing mk_msg_scb\n");
7516                         tid_head = ahd_inw(ahd, MK_MESSAGE_SCB);
7517                         seq_flags2 &= ~PENDING_MK_MESSAGE;
7518                         ahd_outb(ahd, SEQ_FLAGS2, seq_flags2);
7519                         mk_msg_scb = NULL;
7520                 }
7521                 if (tid_head != scbid)
7522                         ahd_stitch_tid_list(ahd, tid_prev, tid_head, tid_next);
7523                 if (!SCBID_IS_NULL(tid_head))
7524                         tid_prev = tid_head;
7525                 if (action == SEARCH_PRINT)
7526                         printf(")\n");
7527         }
7528
7529         /* Restore saved state. */
7530         ahd_set_scbptr(ahd, savedscbptr);
7531         ahd_restore_modes(ahd, saved_modes);
7532         return (found);
7533 }
7534
7535 static int
7536 ahd_search_scb_list(struct ahd_softc *ahd, int target, char channel,
7537                     int lun, u_int tag, role_t role, uint32_t status,
7538                     ahd_search_action action, u_int *list_head, 
7539                     u_int *list_tail, u_int tid)
7540 {
7541         struct  scb *scb;
7542         u_int   scbid;
7543         u_int   next;
7544         u_int   prev;
7545         int     found;
7546
7547         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7548         found = 0;
7549         prev = SCB_LIST_NULL;
7550         next = *list_head;
7551         *list_tail = SCB_LIST_NULL;
7552         for (scbid = next; !SCBID_IS_NULL(scbid); scbid = next) {
7553                 if (scbid >= ahd->scb_data.numscbs) {
7554                         printf("%s:SCB List inconsistency. "
7555                                "SCB == 0x%x, yet numscbs == 0x%x.",
7556                                ahd_name(ahd), scbid, ahd->scb_data.numscbs);
7557                         ahd_dump_card_state(ahd);
7558                         panic("for safety");
7559                 }
7560                 scb = ahd_lookup_scb(ahd, scbid);
7561                 if (scb == NULL) {
7562                         printf("%s: SCB = %d Not Active!\n",
7563                                ahd_name(ahd), scbid);
7564                         panic("Waiting List traversal\n");
7565                 }
7566                 ahd_set_scbptr(ahd, scbid);
7567                 *list_tail = scbid;
7568                 next = ahd_inw_scbram(ahd, SCB_NEXT);
7569                 if (ahd_match_scb(ahd, scb, target, channel,
7570                                   lun, SCB_LIST_NULL, role) == 0) {
7571                         prev = scbid;
7572                         continue;
7573                 }
7574                 found++;
7575                 switch (action) {
7576                 case SEARCH_COMPLETE:
7577                         if ((scb->flags & SCB_ACTIVE) == 0)
7578                                 printf("Inactive SCB in Waiting List\n");
7579                         ahd_done_with_status(ahd, scb, status);
7580                         /* FALLTHROUGH */
7581                 case SEARCH_REMOVE:
7582                         ahd_rem_wscb(ahd, scbid, prev, next, tid);
7583                         *list_tail = prev;
7584                         if (SCBID_IS_NULL(prev))
7585                                 *list_head = next;
7586                         break;
7587                 case SEARCH_PRINT:
7588                         printf("0x%x ", scbid);
7589                 case SEARCH_COUNT:
7590                         prev = scbid;
7591                         break;
7592                 }
7593                 if (found > AHD_SCB_MAX)
7594                         panic("SCB LIST LOOP");
7595         }
7596         if (action == SEARCH_COMPLETE
7597          || action == SEARCH_REMOVE)
7598                 ahd_outw(ahd, CMDS_PENDING, ahd_inw(ahd, CMDS_PENDING) - found);
7599         return (found);
7600 }
7601
7602 static void
7603 ahd_stitch_tid_list(struct ahd_softc *ahd, u_int tid_prev,
7604                     u_int tid_cur, u_int tid_next)
7605 {
7606         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7607
7608         if (SCBID_IS_NULL(tid_cur)) {
7609
7610                 /* Bypass current TID list */
7611                 if (SCBID_IS_NULL(tid_prev)) {
7612                         ahd_outw(ahd, WAITING_TID_HEAD, tid_next);
7613                 } else {
7614                         ahd_set_scbptr(ahd, tid_prev);
7615                         ahd_outw(ahd, SCB_NEXT2, tid_next);
7616                 }
7617                 if (SCBID_IS_NULL(tid_next))
7618                         ahd_outw(ahd, WAITING_TID_TAIL, tid_prev);
7619         } else {
7620
7621                 /* Stitch through tid_cur */
7622                 if (SCBID_IS_NULL(tid_prev)) {
7623                         ahd_outw(ahd, WAITING_TID_HEAD, tid_cur);
7624                 } else {
7625                         ahd_set_scbptr(ahd, tid_prev);
7626                         ahd_outw(ahd, SCB_NEXT2, tid_cur);
7627                 }
7628                 ahd_set_scbptr(ahd, tid_cur);
7629                 ahd_outw(ahd, SCB_NEXT2, tid_next);
7630
7631                 if (SCBID_IS_NULL(tid_next))
7632                         ahd_outw(ahd, WAITING_TID_TAIL, tid_cur);
7633         }
7634 }
7635
7636 /*
7637  * Manipulate the waiting for selection list and return the
7638  * scb that follows the one that we remove.
7639  */
7640 static u_int
7641 ahd_rem_wscb(struct ahd_softc *ahd, u_int scbid,
7642              u_int prev, u_int next, u_int tid)
7643 {
7644         u_int tail_offset;
7645
7646         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7647         if (!SCBID_IS_NULL(prev)) {
7648                 ahd_set_scbptr(ahd, prev);
7649                 ahd_outw(ahd, SCB_NEXT, next);
7650         }
7651
7652         /*
7653          * SCBs that have MK_MESSAGE set in them may
7654          * cause the tail pointer to be updated without
7655          * setting the next pointer of the previous tail.
7656          * Only clear the tail if the removed SCB was
7657          * the tail.
7658          */
7659         tail_offset = WAITING_SCB_TAILS + (2 * tid);
7660         if (SCBID_IS_NULL(next)
7661          && ahd_inw(ahd, tail_offset) == scbid)
7662                 ahd_outw(ahd, tail_offset, prev);
7663
7664         ahd_add_scb_to_free_list(ahd, scbid);
7665         return (next);
7666 }
7667
7668 /*
7669  * Add the SCB as selected by SCBPTR onto the on chip list of
7670  * free hardware SCBs.  This list is empty/unused if we are not
7671  * performing SCB paging.
7672  */
7673 static void
7674 ahd_add_scb_to_free_list(struct ahd_softc *ahd, u_int scbid)
7675 {
7676 /* XXX Need some other mechanism to designate "free". */
7677         /*
7678          * Invalidate the tag so that our abort
7679          * routines don't think it's active.
7680         ahd_outb(ahd, SCB_TAG, SCB_LIST_NULL);
7681          */
7682 }
7683
7684 /******************************** Error Handling ******************************/
7685 /*
7686  * Abort all SCBs that match the given description (target/channel/lun/tag),
7687  * setting their status to the passed in status if the status has not already
7688  * been modified from CAM_REQ_INPROG.  This routine assumes that the sequencer
7689  * is paused before it is called.
7690  */
7691 int
7692 ahd_abort_scbs(struct ahd_softc *ahd, int target, char channel,
7693                int lun, u_int tag, role_t role, uint32_t status)
7694 {
7695         struct          scb *scbp;
7696         struct          scb *scbp_next;
7697         u_int           i, j;
7698         u_int           maxtarget;
7699         u_int           minlun;
7700         u_int           maxlun;
7701         int             found;
7702         ahd_mode_state  saved_modes;
7703
7704         /* restore this when we're done */
7705         saved_modes = ahd_save_modes(ahd);
7706         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7707
7708         found = ahd_search_qinfifo(ahd, target, channel, lun, SCB_LIST_NULL,
7709                                    role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
7710
7711         /*
7712          * Clean out the busy target table for any untagged commands.
7713          */
7714         i = 0;
7715         maxtarget = 16;
7716         if (target != CAM_TARGET_WILDCARD) {
7717                 i = target;
7718                 if (channel == 'B')
7719                         i += 8;
7720                 maxtarget = i + 1;
7721         }
7722
7723         if (lun == CAM_LUN_WILDCARD) {
7724                 minlun = 0;
7725                 maxlun = AHD_NUM_LUNS_NONPKT;
7726         } else if (lun >= AHD_NUM_LUNS_NONPKT) {
7727                 minlun = maxlun = 0;
7728         } else {
7729                 minlun = lun;
7730                 maxlun = lun + 1;
7731         }
7732
7733         if (role != ROLE_TARGET) {
7734                 for (;i < maxtarget; i++) {
7735                         for (j = minlun;j < maxlun; j++) {
7736                                 u_int scbid;
7737                                 u_int tcl;
7738
7739                                 tcl = BUILD_TCL_RAW(i, 'A', j);
7740                                 scbid = ahd_find_busy_tcl(ahd, tcl);
7741                                 scbp = ahd_lookup_scb(ahd, scbid);
7742                                 if (scbp == NULL
7743                                  || ahd_match_scb(ahd, scbp, target, channel,
7744                                                   lun, tag, role) == 0)
7745                                         continue;
7746                                 ahd_unbusy_tcl(ahd, BUILD_TCL_RAW(i, 'A', j));
7747                         }
7748                 }
7749         }
7750
7751         /*
7752          * Don't abort commands that have already completed,
7753          * but haven't quite made it up to the host yet.
7754          */
7755         ahd_flush_qoutfifo(ahd);
7756
7757         /*
7758          * Go through the pending CCB list and look for
7759          * commands for this target that are still active.
7760          * These are other tagged commands that were
7761          * disconnected when the reset occurred.
7762          */
7763         scbp_next = LIST_FIRST(&ahd->pending_scbs);
7764         while (scbp_next != NULL) {
7765                 scbp = scbp_next;
7766                 scbp_next = LIST_NEXT(scbp, pending_links);
7767                 if (ahd_match_scb(ahd, scbp, target, channel, lun, tag, role)) {
7768                         cam_status ostat;
7769
7770                         ostat = ahd_get_transaction_status(scbp);
7771                         if (ostat == CAM_REQ_INPROG)
7772                                 ahd_set_transaction_status(scbp, status);
7773                         if (ahd_get_transaction_status(scbp) != CAM_REQ_CMP)
7774                                 ahd_freeze_scb(scbp);
7775                         if ((scbp->flags & SCB_ACTIVE) == 0)
7776                                 printf("Inactive SCB on pending list\n");
7777                         ahd_done(ahd, scbp);
7778                         found++;
7779                 }
7780         }
7781         ahd_restore_modes(ahd, saved_modes);
7782         ahd_platform_abort_scbs(ahd, target, channel, lun, tag, role, status);
7783         ahd->flags |= AHD_UPDATE_PEND_CMDS;
7784         return found;
7785 }
7786
7787 static void
7788 ahd_reset_current_bus(struct ahd_softc *ahd)
7789 {
7790         uint8_t scsiseq;
7791
7792         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7793         ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) & ~ENSCSIRST);
7794         scsiseq = ahd_inb(ahd, SCSISEQ0) & ~(ENSELO|ENARBO|SCSIRSTO);
7795         ahd_outb(ahd, SCSISEQ0, scsiseq | SCSIRSTO);
7796         ahd_flush_device_writes(ahd);
7797         ahd_delay(AHD_BUSRESET_DELAY);
7798         /* Turn off the bus reset */
7799         ahd_outb(ahd, SCSISEQ0, scsiseq);
7800         ahd_flush_device_writes(ahd);
7801         ahd_delay(AHD_BUSRESET_DELAY);
7802         if ((ahd->bugs & AHD_SCSIRST_BUG) != 0) {
7803                 /*
7804                  * 2A Razor #474
7805                  * Certain chip state is not cleared for
7806                  * SCSI bus resets that we initiate, so
7807                  * we must reset the chip.
7808                  */
7809                 ahd_reset(ahd, /*reinit*/TRUE);
7810                 ahd_intr_enable(ahd, /*enable*/TRUE);
7811                 AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
7812         }
7813
7814         ahd_clear_intstat(ahd);
7815 }
7816
7817 int
7818 ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset)
7819 {
7820         struct  ahd_devinfo devinfo;
7821         u_int   initiator;
7822         u_int   target;
7823         u_int   max_scsiid;
7824         int     found;
7825         u_int   fifo;
7826         u_int   next_fifo;
7827         uint8_t scsiseq;
7828
7829         /*
7830          * Check if the last bus reset is cleared
7831          */
7832         if (ahd->flags & AHD_BUS_RESET_ACTIVE) {
7833                 printf("%s: bus reset still active\n",
7834                        ahd_name(ahd));
7835                 return 0;
7836         }
7837         ahd->flags |= AHD_BUS_RESET_ACTIVE;
7838
7839         ahd->pending_device = NULL;
7840
7841         ahd_compile_devinfo(&devinfo,
7842                             CAM_TARGET_WILDCARD,
7843                             CAM_TARGET_WILDCARD,
7844                             CAM_LUN_WILDCARD,
7845                             channel, ROLE_UNKNOWN);
7846         ahd_pause(ahd);
7847
7848         /* Make sure the sequencer is in a safe location. */
7849         ahd_clear_critical_section(ahd);
7850
7851         /*
7852          * Run our command complete fifos to ensure that we perform
7853          * completion processing on any commands that 'completed'
7854          * before the reset occurred.
7855          */
7856         ahd_run_qoutfifo(ahd);
7857 #ifdef AHD_TARGET_MODE
7858         if ((ahd->flags & AHD_TARGETROLE) != 0) {
7859                 ahd_run_tqinfifo(ahd, /*paused*/TRUE);
7860         }
7861 #endif
7862         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7863
7864         /*
7865          * Disable selections so no automatic hardware
7866          * functions will modify chip state.
7867          */
7868         ahd_outb(ahd, SCSISEQ0, 0);
7869         ahd_outb(ahd, SCSISEQ1, 0);
7870
7871         /*
7872          * Safely shut down our DMA engines.  Always start with
7873          * the FIFO that is not currently active (if any are
7874          * actively connected).
7875          */
7876         next_fifo = fifo = ahd_inb(ahd, DFFSTAT) & CURRFIFO;
7877         if (next_fifo > CURRFIFO_1)
7878                 /* If disconneced, arbitrarily start with FIFO1. */
7879                 next_fifo = fifo = 0;
7880         do {
7881                 next_fifo ^= CURRFIFO_1;
7882                 ahd_set_modes(ahd, next_fifo, next_fifo);
7883                 ahd_outb(ahd, DFCNTRL,
7884                          ahd_inb(ahd, DFCNTRL) & ~(SCSIEN|HDMAEN));
7885                 while ((ahd_inb(ahd, DFCNTRL) & HDMAENACK) != 0)
7886                         ahd_delay(10);
7887                 /*
7888                  * Set CURRFIFO to the now inactive channel.
7889                  */
7890                 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
7891                 ahd_outb(ahd, DFFSTAT, next_fifo);
7892         } while (next_fifo != fifo);
7893
7894         /*
7895          * Reset the bus if we are initiating this reset
7896          */
7897         ahd_clear_msg_state(ahd);
7898         ahd_outb(ahd, SIMODE1,
7899                  ahd_inb(ahd, SIMODE1) & ~(ENBUSFREE|ENSCSIRST));
7900
7901         if (initiate_reset)
7902                 ahd_reset_current_bus(ahd);
7903
7904         ahd_clear_intstat(ahd);
7905
7906         /*
7907          * Clean up all the state information for the
7908          * pending transactions on this bus.
7909          */
7910         found = ahd_abort_scbs(ahd, CAM_TARGET_WILDCARD, channel,
7911                                CAM_LUN_WILDCARD, SCB_LIST_NULL,
7912                                ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
7913
7914         /*
7915          * Cleanup anything left in the FIFOs.
7916          */
7917         ahd_clear_fifo(ahd, 0);
7918         ahd_clear_fifo(ahd, 1);
7919
7920         /*
7921          * Reenable selections
7922          */
7923         ahd_outb(ahd, SIMODE1, ahd_inb(ahd, SIMODE1) | ENSCSIRST);
7924         scsiseq = ahd_inb(ahd, SCSISEQ_TEMPLATE);
7925         ahd_outb(ahd, SCSISEQ1, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
7926
7927         max_scsiid = (ahd->features & AHD_WIDE) ? 15 : 7;
7928 #ifdef AHD_TARGET_MODE
7929         /*
7930          * Send an immediate notify ccb to all target more peripheral
7931          * drivers affected by this action.
7932          */
7933         for (target = 0; target <= max_scsiid; target++) {
7934                 struct ahd_tmode_tstate* tstate;
7935                 u_int lun;
7936
7937                 tstate = ahd->enabled_targets[target];
7938                 if (tstate == NULL)
7939                         continue;
7940                 for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
7941                         struct ahd_tmode_lstate* lstate;
7942
7943                         lstate = tstate->enabled_luns[lun];
7944                         if (lstate == NULL)
7945                                 continue;
7946
7947                         ahd_queue_lstate_event(ahd, lstate, CAM_TARGET_WILDCARD,
7948                                                EVENT_TYPE_BUS_RESET, /*arg*/0);
7949                         ahd_send_lstate_events(ahd, lstate);
7950                 }
7951         }
7952 #endif
7953         /* Notify the XPT that a bus reset occurred */
7954         ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD,
7955                        CAM_LUN_WILDCARD, AC_BUS_RESET, NULL);
7956
7957         /*
7958          * Revert to async/narrow transfers until we renegotiate.
7959          */
7960         for (target = 0; target <= max_scsiid; target++) {
7961
7962                 if (ahd->enabled_targets[target] == NULL)
7963                         continue;
7964                 for (initiator = 0; initiator <= max_scsiid; initiator++) {
7965                         struct ahd_devinfo devinfo;
7966
7967                         ahd_compile_devinfo(&devinfo, target, initiator,
7968                                             CAM_LUN_WILDCARD,
7969                                             'A', ROLE_UNKNOWN);
7970                         ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
7971                                       AHD_TRANS_CUR, /*paused*/TRUE);
7972                         ahd_set_syncrate(ahd, &devinfo, /*period*/0,
7973                                          /*offset*/0, /*ppr_options*/0,
7974                                          AHD_TRANS_CUR, /*paused*/TRUE);
7975                 }
7976         }
7977
7978         ahd_restart(ahd);
7979
7980         return (found);
7981 }
7982
7983 /**************************** Statistics Processing ***************************/
7984 static void
7985 ahd_stat_timer(void *arg)
7986 {
7987         struct  ahd_softc *ahd = arg;
7988         u_long  s;
7989         int     enint_coal;
7990         
7991         ahd_lock(ahd, &s);
7992
7993         enint_coal = ahd->hs_mailbox & ENINT_COALESCE;
7994         if (ahd->cmdcmplt_total > ahd->int_coalescing_threshold)
7995                 enint_coal |= ENINT_COALESCE;
7996         else if (ahd->cmdcmplt_total < ahd->int_coalescing_stop_threshold)
7997                 enint_coal &= ~ENINT_COALESCE;
7998
7999         if (enint_coal != (ahd->hs_mailbox & ENINT_COALESCE)) {
8000                 ahd_enable_coalescing(ahd, enint_coal);
8001 #ifdef AHD_DEBUG
8002                 if ((ahd_debug & AHD_SHOW_INT_COALESCING) != 0)
8003                         printf("%s: Interrupt coalescing "
8004                                "now %sabled. Cmds %d\n",
8005                                ahd_name(ahd),
8006                                (enint_coal & ENINT_COALESCE) ? "en" : "dis",
8007                                ahd->cmdcmplt_total);
8008 #endif
8009         }
8010
8011         ahd->cmdcmplt_bucket = (ahd->cmdcmplt_bucket+1) & (AHD_STAT_BUCKETS-1);
8012         ahd->cmdcmplt_total -= ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket];
8013         ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket] = 0;
8014         ahd_timer_reset(&ahd->stat_timer, AHD_STAT_UPDATE_US,
8015                         ahd_stat_timer, ahd);
8016         ahd_unlock(ahd, &s);
8017 }
8018
8019 /****************************** Status Processing *****************************/
8020 void
8021 ahd_handle_scb_status(struct ahd_softc *ahd, struct scb *scb)
8022 {
8023         if (scb->hscb->shared_data.istatus.scsi_status != 0) {
8024                 ahd_handle_scsi_status(ahd, scb);
8025         } else {
8026                 ahd_calc_residual(ahd, scb);
8027                 ahd_done(ahd, scb);
8028         }
8029 }
8030
8031 void
8032 ahd_handle_scsi_status(struct ahd_softc *ahd, struct scb *scb)
8033 {
8034         struct  hardware_scb *hscb;
8035         int     paused;
8036
8037         /*
8038          * The sequencer freezes its select-out queue
8039          * anytime a SCSI status error occurs.  We must
8040          * handle the error and increment our qfreeze count
8041          * to allow the sequencer to continue.  We don't
8042          * bother clearing critical sections here since all
8043          * operations are on data structures that the sequencer
8044          * is not touching once the queue is frozen.
8045          */
8046         hscb = scb->hscb; 
8047
8048         if (ahd_is_paused(ahd)) {
8049                 paused = 1;
8050         } else {
8051                 paused = 0;
8052                 ahd_pause(ahd);
8053         }
8054
8055         /* Freeze the queue until the client sees the error. */
8056         ahd_freeze_devq(ahd, scb);
8057         ahd_freeze_scb(scb);
8058         ahd->qfreeze_cnt++;
8059         ahd_outw(ahd, KERNEL_QFREEZE_COUNT, ahd->qfreeze_cnt);
8060
8061         if (paused == 0)
8062                 ahd_unpause(ahd);
8063
8064         /* Don't want to clobber the original sense code */
8065         if ((scb->flags & SCB_SENSE) != 0) {
8066                 /*
8067                  * Clear the SCB_SENSE Flag and perform
8068                  * a normal command completion.
8069                  */
8070                 scb->flags &= ~SCB_SENSE;
8071                 ahd_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
8072                 ahd_done(ahd, scb);
8073                 return;
8074         }
8075         ahd_set_transaction_status(scb, CAM_SCSI_STATUS_ERROR);
8076         ahd_set_scsi_status(scb, hscb->shared_data.istatus.scsi_status);
8077         switch (hscb->shared_data.istatus.scsi_status) {
8078         case STATUS_PKT_SENSE:
8079         {
8080                 struct scsi_status_iu_header *siu;
8081
8082                 ahd_sync_sense(ahd, scb, BUS_DMASYNC_POSTREAD);
8083                 siu = (struct scsi_status_iu_header *)scb->sense_data;
8084                 ahd_set_scsi_status(scb, siu->status);
8085 #ifdef AHD_DEBUG
8086                 if ((ahd_debug & AHD_SHOW_SENSE) != 0) {
8087                         ahd_print_path(ahd, scb);
8088                         printf("SCB 0x%x Received PKT Status of 0x%x\n",
8089                                SCB_GET_TAG(scb), siu->status);
8090                         printf("\tflags = 0x%x, sense len = 0x%x, "
8091                                "pktfail = 0x%x\n",
8092                                siu->flags, scsi_4btoul(siu->sense_length),
8093                                scsi_4btoul(siu->pkt_failures_length));
8094                 }
8095 #endif
8096                 if ((siu->flags & SIU_RSPVALID) != 0) {
8097                         ahd_print_path(ahd, scb);
8098                         if (scsi_4btoul(siu->pkt_failures_length) < 4) {
8099                                 printf("Unable to parse pkt_failures\n");
8100                         } else {
8101
8102                                 switch (SIU_PKTFAIL_CODE(siu)) {
8103                                 case SIU_PFC_NONE:
8104                                         printf("No packet failure found\n");
8105                                         break;
8106                                 case SIU_PFC_CIU_FIELDS_INVALID:
8107                                         printf("Invalid Command IU Field\n");
8108                                         break;
8109                                 case SIU_PFC_TMF_NOT_SUPPORTED:
8110                                         printf("TMF not supportd\n");
8111                                         break;
8112                                 case SIU_PFC_TMF_FAILED:
8113                                         printf("TMF failed\n");
8114                                         break;
8115                                 case SIU_PFC_INVALID_TYPE_CODE:
8116                                         printf("Invalid L_Q Type code\n");
8117                                         break;
8118                                 case SIU_PFC_ILLEGAL_REQUEST:
8119                                         printf("Illegal request\n");
8120                                 default:
8121                                         break;
8122                                 }
8123                         }
8124                         if (siu->status == SCSI_STATUS_OK)
8125                                 ahd_set_transaction_status(scb,
8126                                                            CAM_REQ_CMP_ERR);
8127                 }
8128                 if ((siu->flags & SIU_SNSVALID) != 0) {
8129                         scb->flags |= SCB_PKT_SENSE;
8130 #ifdef AHD_DEBUG
8131                         if ((ahd_debug & AHD_SHOW_SENSE) != 0)
8132                                 printf("Sense data available\n");
8133 #endif
8134                 }
8135                 ahd_done(ahd, scb);
8136                 break;
8137         }
8138         case SCSI_STATUS_CMD_TERMINATED:
8139         case SCSI_STATUS_CHECK_COND:
8140         {
8141                 struct ahd_devinfo devinfo;
8142                 struct ahd_dma_seg *sg;
8143                 struct scsi_sense *sc;
8144                 struct ahd_initiator_tinfo *targ_info;
8145                 struct ahd_tmode_tstate *tstate;
8146                 struct ahd_transinfo *tinfo;
8147 #ifdef AHD_DEBUG
8148                 if (ahd_debug & AHD_SHOW_SENSE) {
8149                         ahd_print_path(ahd, scb);
8150                         printf("SCB %d: requests Check Status\n",
8151                                SCB_GET_TAG(scb));
8152                 }
8153 #endif
8154
8155                 if (ahd_perform_autosense(scb) == 0)
8156                         break;
8157
8158                 ahd_compile_devinfo(&devinfo, SCB_GET_OUR_ID(scb),
8159                                     SCB_GET_TARGET(ahd, scb),
8160                                     SCB_GET_LUN(scb),
8161                                     SCB_GET_CHANNEL(ahd, scb),
8162                                     ROLE_INITIATOR);
8163                 targ_info = ahd_fetch_transinfo(ahd,
8164                                                 devinfo.channel,
8165                                                 devinfo.our_scsiid,
8166                                                 devinfo.target,
8167                                                 &tstate);
8168                 tinfo = &targ_info->curr;
8169                 sg = scb->sg_list;
8170                 sc = (struct scsi_sense *)hscb->shared_data.idata.cdb;
8171                 /*
8172                  * Save off the residual if there is one.
8173                  */
8174                 ahd_update_residual(ahd, scb);
8175 #ifdef AHD_DEBUG
8176                 if (ahd_debug & AHD_SHOW_SENSE) {
8177                         ahd_print_path(ahd, scb);
8178                         printf("Sending Sense\n");
8179                 }
8180 #endif
8181                 scb->sg_count = 0;
8182                 sg = ahd_sg_setup(ahd, scb, sg, ahd_get_sense_bufaddr(ahd, scb),
8183                                   ahd_get_sense_bufsize(ahd, scb),
8184                                   /*last*/TRUE);
8185                 sc->opcode = REQUEST_SENSE;
8186                 sc->byte2 = 0;
8187                 if (tinfo->protocol_version <= SCSI_REV_2
8188                  && SCB_GET_LUN(scb) < 8)
8189                         sc->byte2 = SCB_GET_LUN(scb) << 5;
8190                 sc->unused[0] = 0;
8191                 sc->unused[1] = 0;
8192                 sc->length = ahd_get_sense_bufsize(ahd, scb);
8193                 sc->control = 0;
8194
8195                 /*
8196                  * We can't allow the target to disconnect.
8197                  * This will be an untagged transaction and
8198                  * having the target disconnect will make this
8199                  * transaction indestinguishable from outstanding
8200                  * tagged transactions.
8201                  */
8202                 hscb->control = 0;
8203
8204                 /*
8205                  * This request sense could be because the
8206                  * the device lost power or in some other
8207                  * way has lost our transfer negotiations.
8208                  * Renegotiate if appropriate.  Unit attention
8209                  * errors will be reported before any data
8210                  * phases occur.
8211                  */
8212                 if (ahd_get_residual(scb) == ahd_get_transfer_length(scb)) {
8213                         ahd_update_neg_request(ahd, &devinfo,
8214                                                tstate, targ_info,
8215                                                AHD_NEG_IF_NON_ASYNC);
8216                 }
8217                 if (tstate->auto_negotiate & devinfo.target_mask) {
8218                         hscb->control |= MK_MESSAGE;
8219                         scb->flags &=
8220                             ~(SCB_NEGOTIATE|SCB_ABORT|SCB_DEVICE_RESET);
8221                         scb->flags |= SCB_AUTO_NEGOTIATE;
8222                 }
8223                 hscb->cdb_len = sizeof(*sc);
8224                 ahd_setup_data_scb(ahd, scb);
8225                 scb->flags |= SCB_SENSE;
8226                 ahd_queue_scb(ahd, scb);
8227                 break;
8228         }
8229         case SCSI_STATUS_OK:
8230                 printf("%s: Interrupted for staus of 0???\n",
8231                        ahd_name(ahd));
8232                 /* FALLTHROUGH */
8233         default:
8234                 ahd_done(ahd, scb);
8235                 break;
8236         }
8237 }
8238
8239 /*
8240  * Calculate the residual for a just completed SCB.
8241  */
8242 void
8243 ahd_calc_residual(struct ahd_softc *ahd, struct scb *scb)
8244 {
8245         struct hardware_scb *hscb;
8246         struct initiator_status *spkt;
8247         uint32_t sgptr;
8248         uint32_t resid_sgptr;
8249         uint32_t resid;
8250
8251         /*
8252          * 5 cases.
8253          * 1) No residual.
8254          *    SG_STATUS_VALID clear in sgptr.
8255          * 2) Transferless command
8256          * 3) Never performed any transfers.
8257          *    sgptr has SG_FULL_RESID set.
8258          * 4) No residual but target did not
8259          *    save data pointers after the
8260          *    last transfer, so sgptr was
8261          *    never updated.
8262          * 5) We have a partial residual.
8263          *    Use residual_sgptr to determine
8264          *    where we are.
8265          */
8266
8267         hscb = scb->hscb;
8268         sgptr = ahd_le32toh(hscb->sgptr);
8269         if ((sgptr & SG_STATUS_VALID) == 0)
8270                 /* Case 1 */
8271                 return;
8272         sgptr &= ~SG_STATUS_VALID;
8273
8274         if ((sgptr & SG_LIST_NULL) != 0)
8275                 /* Case 2 */
8276                 return;
8277
8278         /*
8279          * Residual fields are the same in both
8280          * target and initiator status packets,
8281          * so we can always use the initiator fields
8282          * regardless of the role for this SCB.
8283          */
8284         spkt = &hscb->shared_data.istatus;
8285         resid_sgptr = ahd_le32toh(spkt->residual_sgptr);
8286         if ((sgptr & SG_FULL_RESID) != 0) {
8287                 /* Case 3 */
8288                 resid = ahd_get_transfer_length(scb);
8289         } else if ((resid_sgptr & SG_LIST_NULL) != 0) {
8290                 /* Case 4 */
8291                 return;
8292         } else if ((resid_sgptr & SG_OVERRUN_RESID) != 0) {
8293                 ahd_print_path(ahd, scb);
8294                 printf("data overrun detected Tag == 0x%x.\n",
8295                        SCB_GET_TAG(scb));
8296                 ahd_freeze_devq(ahd, scb);
8297                 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
8298                 ahd_freeze_scb(scb);
8299                 return;
8300         } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
8301                 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
8302                 /* NOTREACHED */
8303         } else {
8304                 struct ahd_dma_seg *sg;
8305
8306                 /*
8307                  * Remainder of the SG where the transfer
8308                  * stopped.  
8309                  */
8310                 resid = ahd_le32toh(spkt->residual_datacnt) & AHD_SG_LEN_MASK;
8311                 sg = ahd_sg_bus_to_virt(ahd, scb, resid_sgptr & SG_PTR_MASK);
8312
8313                 /* The residual sg_ptr always points to the next sg */
8314                 sg--;
8315
8316                 /*
8317                  * Add up the contents of all residual
8318                  * SG segments that are after the SG where
8319                  * the transfer stopped.
8320                  */
8321                 while ((ahd_le32toh(sg->len) & AHD_DMA_LAST_SEG) == 0) {
8322                         sg++;
8323                         resid += ahd_le32toh(sg->len) & AHD_SG_LEN_MASK;
8324                 }
8325         }
8326         if ((scb->flags & SCB_SENSE) == 0)
8327                 ahd_set_residual(scb, resid);
8328         else
8329                 ahd_set_sense_residual(scb, resid);
8330
8331 #ifdef AHD_DEBUG
8332         if ((ahd_debug & AHD_SHOW_MISC) != 0) {
8333                 ahd_print_path(ahd, scb);
8334                 printf("Handled %sResidual of %d bytes\n",
8335                        (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
8336         }
8337 #endif
8338 }
8339
8340 /******************************* Target Mode **********************************/
8341 #ifdef AHD_TARGET_MODE
8342 /*
8343  * Add a target mode event to this lun's queue
8344  */
8345 static void
8346 ahd_queue_lstate_event(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate,
8347                        u_int initiator_id, u_int event_type, u_int event_arg)
8348 {
8349         struct ahd_tmode_event *event;
8350         int pending;
8351
8352         xpt_freeze_devq(lstate->path, /*count*/1);
8353         if (lstate->event_w_idx >= lstate->event_r_idx)
8354                 pending = lstate->event_w_idx - lstate->event_r_idx;
8355         else
8356                 pending = AHD_TMODE_EVENT_BUFFER_SIZE + 1
8357                         - (lstate->event_r_idx - lstate->event_w_idx);
8358
8359         if (event_type == EVENT_TYPE_BUS_RESET
8360          || event_type == MSG_BUS_DEV_RESET) {
8361                 /*
8362                  * Any earlier events are irrelevant, so reset our buffer.
8363                  * This has the effect of allowing us to deal with reset
8364                  * floods (an external device holding down the reset line)
8365                  * without losing the event that is really interesting.
8366                  */
8367                 lstate->event_r_idx = 0;
8368                 lstate->event_w_idx = 0;
8369                 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
8370         }
8371
8372         if (pending == AHD_TMODE_EVENT_BUFFER_SIZE) {
8373                 xpt_print_path(lstate->path);
8374                 printf("immediate event %x:%x lost\n",
8375                        lstate->event_buffer[lstate->event_r_idx].event_type,
8376                        lstate->event_buffer[lstate->event_r_idx].event_arg);
8377                 lstate->event_r_idx++;
8378                 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
8379                         lstate->event_r_idx = 0;
8380                 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
8381         }
8382
8383         event = &lstate->event_buffer[lstate->event_w_idx];
8384         event->initiator_id = initiator_id;
8385         event->event_type = event_type;
8386         event->event_arg = event_arg;
8387         lstate->event_w_idx++;
8388         if (lstate->event_w_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
8389                 lstate->event_w_idx = 0;
8390 }
8391
8392 /*
8393  * Send any target mode events queued up waiting
8394  * for immediate notify resources.
8395  */
8396 void
8397 ahd_send_lstate_events(struct ahd_softc *ahd, struct ahd_tmode_lstate *lstate)
8398 {
8399         struct ccb_hdr *ccbh;
8400         struct ccb_immed_notify *inot;
8401
8402         while (lstate->event_r_idx != lstate->event_w_idx
8403             && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
8404                 struct ahd_tmode_event *event;
8405
8406                 event = &lstate->event_buffer[lstate->event_r_idx];
8407                 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
8408                 inot = (struct ccb_immed_notify *)ccbh;
8409                 switch (event->event_type) {
8410                 case EVENT_TYPE_BUS_RESET:
8411                         ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
8412                         break;
8413                 default:
8414                         ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
8415                         inot->message_args[0] = event->event_type;
8416                         inot->message_args[1] = event->event_arg;
8417                         break;
8418                 }
8419                 inot->initiator_id = event->initiator_id;
8420                 inot->sense_len = 0;
8421                 xpt_done((union ccb *)inot);
8422                 lstate->event_r_idx++;
8423                 if (lstate->event_r_idx == AHD_TMODE_EVENT_BUFFER_SIZE)
8424                         lstate->event_r_idx = 0;
8425         }
8426 }
8427 #endif
8428
8429 /******************** Sequencer Program Patching/Download *********************/
8430
8431 #ifdef AHD_DUMP_SEQ
8432 void
8433 ahd_dumpseq(struct ahd_softc* ahd)
8434 {
8435         int i;
8436         int max_prog;
8437
8438         max_prog = 2048;
8439
8440         ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
8441         ahd_outw(ahd, PRGMCNT, 0);
8442         for (i = 0; i < max_prog; i++) {
8443                 uint8_t ins_bytes[4];
8444
8445                 ahd_insb(ahd, SEQRAM, ins_bytes, 4);
8446                 printf("0x%08x\n", ins_bytes[0] << 24
8447                                  | ins_bytes[1] << 16
8448                                  | ins_bytes[2] << 8
8449                                  | ins_bytes[3]);
8450         }
8451 }
8452 #endif
8453
8454 static void
8455 ahd_loadseq(struct ahd_softc *ahd)
8456 {
8457         struct  cs cs_table[num_critical_sections];
8458         u_int   begin_set[num_critical_sections];
8459         u_int   end_set[num_critical_sections];
8460         struct  patch *cur_patch;
8461         u_int   cs_count;
8462         u_int   cur_cs;
8463         u_int   i;
8464         int     downloaded;
8465         u_int   skip_addr;
8466         u_int   sg_prefetch_cnt;
8467         u_int   sg_prefetch_cnt_limit;
8468         u_int   sg_prefetch_align;
8469         u_int   sg_size;
8470         u_int   cacheline_mask;
8471         uint8_t download_consts[DOWNLOAD_CONST_COUNT];
8472
8473         if (bootverbose)
8474                 printf("%s: Downloading Sequencer Program...",
8475                        ahd_name(ahd));
8476
8477 #if DOWNLOAD_CONST_COUNT != 8
8478 #error "Download Const Mismatch"
8479 #endif
8480         /*
8481          * Start out with 0 critical sections
8482          * that apply to this firmware load.
8483          */
8484         cs_count = 0;
8485         cur_cs = 0;
8486         memset(begin_set, 0, sizeof(begin_set));
8487         memset(end_set, 0, sizeof(end_set));
8488
8489         /*
8490          * Setup downloadable constant table.
8491          * 
8492          * The computation for the S/G prefetch variables is
8493          * a bit complicated.  We would like to always fetch
8494          * in terms of cachelined sized increments.  However,
8495          * if the cacheline is not an even multiple of the
8496          * SG element size or is larger than our SG RAM, using
8497          * just the cache size might leave us with only a portion
8498          * of an SG element at the tail of a prefetch.  If the
8499          * cacheline is larger than our S/G prefetch buffer less
8500          * the size of an SG element, we may round down to a cacheline
8501          * that doesn't contain any or all of the S/G of interest
8502          * within the bounds of our S/G ram.  Provide variables to
8503          * the sequencer that will allow it to handle these edge
8504          * cases.
8505          */
8506         /* Start by aligning to the nearest cacheline. */
8507         sg_prefetch_align = ahd->pci_cachesize;
8508         if (sg_prefetch_align == 0)
8509                 sg_prefetch_align = 8;
8510         /* Round down to the nearest power of 2. */
8511         while (powerof2(sg_prefetch_align) == 0)
8512                 sg_prefetch_align--;
8513
8514         cacheline_mask = sg_prefetch_align - 1;
8515
8516         /*
8517          * If the cacheline boundary is greater than half our prefetch RAM
8518          * we risk not being able to fetch even a single complete S/G
8519          * segment if we align to that boundary.
8520          */
8521         if (sg_prefetch_align > CCSGADDR_MAX/2)
8522                 sg_prefetch_align = CCSGADDR_MAX/2;
8523         /* Start by fetching a single cacheline. */
8524         sg_prefetch_cnt = sg_prefetch_align;
8525         /*
8526          * Increment the prefetch count by cachelines until
8527          * at least one S/G element will fit.
8528          */
8529         sg_size = sizeof(struct ahd_dma_seg);
8530         if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0)
8531                 sg_size = sizeof(struct ahd_dma64_seg);
8532         while (sg_prefetch_cnt < sg_size)
8533                 sg_prefetch_cnt += sg_prefetch_align;
8534         /*
8535          * If the cacheline is not an even multiple of
8536          * the S/G size, we may only get a partial S/G when
8537          * we align. Add a cacheline if this is the case.
8538          */
8539         if ((sg_prefetch_align % sg_size) != 0
8540          && (sg_prefetch_cnt < CCSGADDR_MAX))
8541                 sg_prefetch_cnt += sg_prefetch_align;
8542         /*
8543          * Lastly, compute a value that the sequencer can use
8544          * to determine if the remainder of the CCSGRAM buffer
8545          * has a full S/G element in it.
8546          */
8547         sg_prefetch_cnt_limit = -(sg_prefetch_cnt - sg_size + 1);
8548         download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
8549         download_consts[SG_PREFETCH_CNT_LIMIT] = sg_prefetch_cnt_limit;
8550         download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_align - 1);
8551         download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_align - 1);
8552         download_consts[SG_SIZEOF] = sg_size;
8553         download_consts[PKT_OVERRUN_BUFOFFSET] =
8554                 (ahd->overrun_buf - (uint8_t *)ahd->qoutfifo) / 256;
8555         download_consts[SCB_TRANSFER_SIZE] = SCB_TRANSFER_SIZE_1BYTE_LUN;
8556         download_consts[CACHELINE_MASK] = cacheline_mask;
8557         cur_patch = patches;
8558         downloaded = 0;
8559         skip_addr = 0;
8560         ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
8561         ahd_outw(ahd, PRGMCNT, 0);
8562
8563         for (i = 0; i < sizeof(seqprog)/4; i++) {
8564                 if (ahd_check_patch(ahd, &cur_patch, i, &skip_addr) == 0) {
8565                         /*
8566                          * Don't download this instruction as it
8567                          * is in a patch that was removed.
8568                          */
8569                         continue;
8570                 }
8571                 /*
8572                  * Move through the CS table until we find a CS
8573                  * that might apply to this instruction.
8574                  */
8575                 for (; cur_cs < num_critical_sections; cur_cs++) {
8576                         if (critical_sections[cur_cs].end <= i) {
8577                                 if (begin_set[cs_count] == TRUE
8578                                  && end_set[cs_count] == FALSE) {
8579                                         cs_table[cs_count].end = downloaded;
8580                                         end_set[cs_count] = TRUE;
8581                                         cs_count++;
8582                                 }
8583                                 continue;
8584                         }
8585                         if (critical_sections[cur_cs].begin <= i
8586                          && begin_set[cs_count] == FALSE) {
8587                                 cs_table[cs_count].begin = downloaded;
8588                                 begin_set[cs_count] = TRUE;
8589                         }
8590                         break;
8591                 }
8592                 ahd_download_instr(ahd, i, download_consts);
8593                 downloaded++;
8594         }
8595
8596         ahd->num_critical_sections = cs_count;
8597         if (cs_count != 0) {
8598
8599                 cs_count *= sizeof(struct cs);
8600                 ahd->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT);
8601                 if (ahd->critical_sections == NULL)
8602                         panic("ahd_loadseq: Could not malloc");
8603                 memcpy(ahd->critical_sections, cs_table, cs_count);
8604         }
8605         ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS|FASTMODE);
8606
8607         if (bootverbose) {
8608                 printf(" %d instructions downloaded\n", downloaded);
8609                 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
8610                        ahd_name(ahd), ahd->features, ahd->bugs, ahd->flags);
8611         }
8612 }
8613
8614 static int
8615 ahd_check_patch(struct ahd_softc *ahd, struct patch **start_patch,
8616                 u_int start_instr, u_int *skip_addr)
8617 {
8618         struct  patch *cur_patch;
8619         struct  patch *last_patch;
8620         u_int   num_patches;
8621
8622         num_patches = sizeof(patches)/sizeof(struct patch);
8623         last_patch = &patches[num_patches];
8624         cur_patch = *start_patch;
8625
8626         while (cur_patch < last_patch && start_instr == cur_patch->begin) {
8627
8628                 if (cur_patch->patch_func(ahd) == 0) {
8629
8630                         /* Start rejecting code */
8631                         *skip_addr = start_instr + cur_patch->skip_instr;
8632                         cur_patch += cur_patch->skip_patch;
8633                 } else {
8634                         /* Accepted this patch.  Advance to the next
8635                          * one and wait for our intruction pointer to
8636                          * hit this point.
8637                          */
8638                         cur_patch++;
8639                 }
8640         }
8641
8642         *start_patch = cur_patch;
8643         if (start_instr < *skip_addr)
8644                 /* Still skipping */
8645                 return (0);
8646
8647         return (1);
8648 }
8649
8650 static u_int
8651 ahd_resolve_seqaddr(struct ahd_softc *ahd, u_int address)
8652 {
8653         struct patch *cur_patch;
8654         int address_offset;
8655         u_int skip_addr;
8656         u_int i;
8657
8658         address_offset = 0;
8659         cur_patch = patches;
8660         skip_addr = 0;
8661
8662         for (i = 0; i < address;) {
8663
8664                 ahd_check_patch(ahd, &cur_patch, i, &skip_addr);
8665
8666                 if (skip_addr > i) {
8667                         int end_addr;
8668
8669                         end_addr = MIN(address, skip_addr);
8670                         address_offset += end_addr - i;
8671                         i = skip_addr;
8672                 } else {
8673                         i++;
8674                 }
8675         }
8676         return (address - address_offset);
8677 }
8678
8679 static void
8680 ahd_download_instr(struct ahd_softc *ahd, u_int instrptr, uint8_t *dconsts)
8681 {
8682         union   ins_formats instr;
8683         struct  ins_format1 *fmt1_ins;
8684         struct  ins_format3 *fmt3_ins;
8685         u_int   opcode;
8686
8687         /*
8688          * The firmware is always compiled into a little endian format.
8689          */
8690         instr.integer = ahd_le32toh(*(uint32_t*)&seqprog[instrptr * 4]);
8691
8692         fmt1_ins = &instr.format1;
8693         fmt3_ins = NULL;
8694
8695         /* Pull the opcode */
8696         opcode = instr.format1.opcode;
8697         switch (opcode) {
8698         case AIC_OP_JMP:
8699         case AIC_OP_JC:
8700         case AIC_OP_JNC:
8701         case AIC_OP_CALL:
8702         case AIC_OP_JNE:
8703         case AIC_OP_JNZ:
8704         case AIC_OP_JE:
8705         case AIC_OP_JZ:
8706         {
8707                 fmt3_ins = &instr.format3;
8708                 fmt3_ins->address = ahd_resolve_seqaddr(ahd, fmt3_ins->address);
8709                 /* FALLTHROUGH */
8710         }
8711         case AIC_OP_OR:
8712         case AIC_OP_AND:
8713         case AIC_OP_XOR:
8714         case AIC_OP_ADD:
8715         case AIC_OP_ADC:
8716         case AIC_OP_BMOV:
8717                 if (fmt1_ins->parity != 0) {
8718                         fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
8719                 }
8720                 fmt1_ins->parity = 0;
8721                 /* FALLTHROUGH */
8722         case AIC_OP_ROL:
8723         {
8724                 int i, count;
8725
8726                 /* Calculate odd parity for the instruction */
8727                 for (i = 0, count = 0; i < 31; i++) {
8728                         uint32_t mask;
8729
8730                         mask = 0x01 << i;
8731                         if ((instr.integer & mask) != 0)
8732                                 count++;
8733                 }
8734                 if ((count & 0x01) == 0)
8735                         instr.format1.parity = 1;
8736
8737                 /* The sequencer is a little endian cpu */
8738                 instr.integer = ahd_htole32(instr.integer);
8739                 ahd_outsb(ahd, SEQRAM, instr.bytes, 4);
8740                 break;
8741         }
8742         default:
8743                 panic("Unknown opcode encountered in seq program");
8744                 break;
8745         }
8746 }
8747
8748 static int
8749 ahd_probe_stack_size(struct ahd_softc *ahd)
8750 {
8751         int last_probe;
8752
8753         last_probe = 0;
8754         while (1) {
8755                 int i;
8756
8757                 /*
8758                  * We avoid using 0 as a pattern to avoid
8759                  * confusion if the stack implementation
8760                  * "back-fills" with zeros when "poping'
8761                  * entries.
8762                  */
8763                 for (i = 1; i <= last_probe+1; i++) {
8764                        ahd_outb(ahd, STACK, i & 0xFF);
8765                        ahd_outb(ahd, STACK, (i >> 8) & 0xFF);
8766                 }
8767
8768                 /* Verify */
8769                 for (i = last_probe+1; i > 0; i--) {
8770                         u_int stack_entry;
8771
8772                         stack_entry = ahd_inb(ahd, STACK)
8773                                     |(ahd_inb(ahd, STACK) << 8);
8774                         if (stack_entry != i)
8775                                 goto sized;
8776                 }
8777                 last_probe++;
8778         }
8779 sized:
8780         return (last_probe);
8781 }
8782
8783 int
8784 ahd_print_register(ahd_reg_parse_entry_t *table, u_int num_entries,
8785                    const char *name, u_int address, u_int value,
8786                    u_int *cur_column, u_int wrap_point)
8787 {
8788         int     printed;
8789         u_int   printed_mask;
8790
8791         if (cur_column != NULL && *cur_column >= wrap_point) {
8792                 printf("\n");
8793                 *cur_column = 0;
8794         }
8795         printed = printf("%s[0x%x]", name, value);
8796         if (table == NULL) {
8797                 printed += printf(" ");
8798                 *cur_column += printed;
8799                 return (printed);
8800         }
8801         printed_mask = 0;
8802         while (printed_mask != 0xFF) {
8803                 int entry;
8804
8805                 for (entry = 0; entry < num_entries; entry++) {
8806                         if (((value & table[entry].mask)
8807                           != table[entry].value)
8808                          || ((printed_mask & table[entry].mask)
8809                           == table[entry].mask))
8810                                 continue;
8811
8812                         printed += printf("%s%s",
8813                                           printed_mask == 0 ? ":(" : "|",
8814                                           table[entry].name);
8815                         printed_mask |= table[entry].mask;
8816                         
8817                         break;
8818                 }
8819                 if (entry >= num_entries)
8820                         break;
8821         }
8822         if (printed_mask != 0)
8823                 printed += printf(") ");
8824         else
8825                 printed += printf(" ");
8826         if (cur_column != NULL)
8827                 *cur_column += printed;
8828         return (printed);
8829 }
8830
8831 void
8832 ahd_dump_card_state(struct ahd_softc *ahd)
8833 {
8834         struct scb      *scb;
8835         ahd_mode_state   saved_modes;
8836         u_int            dffstat;
8837         int              paused;
8838         u_int            scb_index;
8839         u_int            saved_scb_index;
8840         u_int            cur_col;
8841         int              i;
8842
8843         if (ahd_is_paused(ahd)) {
8844                 paused = 1;
8845         } else {
8846                 paused = 0;
8847                 ahd_pause(ahd);
8848         }
8849         saved_modes = ahd_save_modes(ahd);
8850         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
8851         printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
8852                "%s: Dumping Card State at program address 0x%x Mode 0x%x\n",
8853                ahd_name(ahd), 
8854                ahd_inw(ahd, CURADDR),
8855                ahd_build_mode_state(ahd, ahd->saved_src_mode,
8856                                     ahd->saved_dst_mode));
8857         if (paused)
8858                 printf("Card was paused\n");
8859
8860         if (ahd_check_cmdcmpltqueues(ahd))
8861                 printf("Completions are pending\n");
8862
8863         /*
8864          * Mode independent registers.
8865          */
8866         cur_col = 0;
8867         ahd_intstat_print(ahd_inb(ahd, INTSTAT), &cur_col, 50);
8868         ahd_seloid_print(ahd_inb(ahd, SELOID), &cur_col, 50);
8869         ahd_selid_print(ahd_inb(ahd, SELID), &cur_col, 50);
8870         ahd_hs_mailbox_print(ahd_inb(ahd, LOCAL_HS_MAILBOX), &cur_col, 50);
8871         ahd_intctl_print(ahd_inb(ahd, INTCTL), &cur_col, 50);
8872         ahd_seqintstat_print(ahd_inb(ahd, SEQINTSTAT), &cur_col, 50);
8873         ahd_saved_mode_print(ahd_inb(ahd, SAVED_MODE), &cur_col, 50);
8874         ahd_dffstat_print(ahd_inb(ahd, DFFSTAT), &cur_col, 50);
8875         ahd_scsisigi_print(ahd_inb(ahd, SCSISIGI), &cur_col, 50);
8876         ahd_scsiphase_print(ahd_inb(ahd, SCSIPHASE), &cur_col, 50);
8877         ahd_scsibus_print(ahd_inb(ahd, SCSIBUS), &cur_col, 50);
8878         ahd_lastphase_print(ahd_inb(ahd, LASTPHASE), &cur_col, 50);
8879         ahd_scsiseq0_print(ahd_inb(ahd, SCSISEQ0), &cur_col, 50);
8880         ahd_scsiseq1_print(ahd_inb(ahd, SCSISEQ1), &cur_col, 50);
8881         ahd_seqctl0_print(ahd_inb(ahd, SEQCTL0), &cur_col, 50);
8882         ahd_seqintctl_print(ahd_inb(ahd, SEQINTCTL), &cur_col, 50);
8883         ahd_seq_flags_print(ahd_inb(ahd, SEQ_FLAGS), &cur_col, 50);
8884         ahd_seq_flags2_print(ahd_inb(ahd, SEQ_FLAGS2), &cur_col, 50);
8885         ahd_qfreeze_count_print(ahd_inw(ahd, QFREEZE_COUNT), &cur_col, 50);
8886         ahd_kernel_qfreeze_count_print(ahd_inw(ahd, KERNEL_QFREEZE_COUNT),
8887                                        &cur_col, 50);
8888         ahd_mk_message_scb_print(ahd_inw(ahd, MK_MESSAGE_SCB), &cur_col, 50);
8889         ahd_mk_message_scsiid_print(ahd_inb(ahd, MK_MESSAGE_SCSIID),
8890                                     &cur_col, 50);
8891         ahd_sstat0_print(ahd_inb(ahd, SSTAT0), &cur_col, 50);
8892         ahd_sstat1_print(ahd_inb(ahd, SSTAT1), &cur_col, 50);
8893         ahd_sstat2_print(ahd_inb(ahd, SSTAT2), &cur_col, 50);
8894         ahd_sstat3_print(ahd_inb(ahd, SSTAT3), &cur_col, 50);
8895         ahd_perrdiag_print(ahd_inb(ahd, PERRDIAG), &cur_col, 50);
8896         ahd_simode1_print(ahd_inb(ahd, SIMODE1), &cur_col, 50);
8897         ahd_lqistat0_print(ahd_inb(ahd, LQISTAT0), &cur_col, 50);
8898         ahd_lqistat1_print(ahd_inb(ahd, LQISTAT1), &cur_col, 50);
8899         ahd_lqistat2_print(ahd_inb(ahd, LQISTAT2), &cur_col, 50);
8900         ahd_lqostat0_print(ahd_inb(ahd, LQOSTAT0), &cur_col, 50);
8901         ahd_lqostat1_print(ahd_inb(ahd, LQOSTAT1), &cur_col, 50);
8902         ahd_lqostat2_print(ahd_inb(ahd, LQOSTAT2), &cur_col, 50);
8903         printf("\n");
8904         printf("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x "
8905                "CURRSCB 0x%x NEXTSCB 0x%x\n",
8906                ahd->scb_data.numscbs, ahd_inw(ahd, CMDS_PENDING),
8907                ahd_inw(ahd, LASTSCB), ahd_inw(ahd, CURRSCB),
8908                ahd_inw(ahd, NEXTSCB));
8909         cur_col = 0;
8910         /* QINFIFO */
8911         ahd_search_qinfifo(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
8912                            CAM_LUN_WILDCARD, SCB_LIST_NULL,
8913                            ROLE_UNKNOWN, /*status*/0, SEARCH_PRINT);
8914         saved_scb_index = ahd_get_scbptr(ahd);
8915         printf("Pending list:");
8916         i = 0;
8917         LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
8918                 if (i++ > AHD_SCB_MAX)
8919                         break;
8920                 cur_col = printf("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb),
8921                                  ahd_inb_scbram(ahd, SCB_FIFO_USE_COUNT));
8922                 ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
8923                 ahd_scb_control_print(ahd_inb_scbram(ahd, SCB_CONTROL),
8924                                       &cur_col, 60);
8925                 ahd_scb_scsiid_print(ahd_inb_scbram(ahd, SCB_SCSIID),
8926                                      &cur_col, 60);
8927         }
8928         printf("\nTotal %d\n", i);
8929
8930         printf("Kernel Free SCB list: ");
8931         i = 0;
8932         TAILQ_FOREACH(scb, &ahd->scb_data.free_scbs, links.tqe) {
8933                 struct scb *list_scb;
8934
8935                 list_scb = scb;
8936                 do {
8937                         printf("%d ", SCB_GET_TAG(list_scb));
8938                         list_scb = LIST_NEXT(list_scb, collision_links);
8939                 } while (list_scb && i++ < AHD_SCB_MAX);
8940         }
8941
8942         LIST_FOREACH(scb, &ahd->scb_data.any_dev_free_scb_list, links.le) {
8943                 if (i++ > AHD_SCB_MAX)
8944                         break;
8945                 printf("%d ", SCB_GET_TAG(scb));
8946         }
8947         printf("\n");
8948
8949         printf("Sequencer Complete DMA-inprog list: ");
8950         scb_index = ahd_inw(ahd, COMPLETE_SCB_DMAINPROG_HEAD);
8951         i = 0;
8952         while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8953                 ahd_set_scbptr(ahd, scb_index);
8954                 printf("%d ", scb_index);
8955                 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8956         }
8957         printf("\n");
8958
8959         printf("Sequencer Complete list: ");
8960         scb_index = ahd_inw(ahd, COMPLETE_SCB_HEAD);
8961         i = 0;
8962         while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8963                 ahd_set_scbptr(ahd, scb_index);
8964                 printf("%d ", scb_index);
8965                 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8966         }
8967         printf("\n");
8968
8969         
8970         printf("Sequencer DMA-Up and Complete list: ");
8971         scb_index = ahd_inw(ahd, COMPLETE_DMA_SCB_HEAD);
8972         i = 0;
8973         while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8974                 ahd_set_scbptr(ahd, scb_index);
8975                 printf("%d ", scb_index);
8976                 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8977         }
8978         printf("\n");
8979         printf("Sequencer On QFreeze and Complete list: ");
8980         scb_index = ahd_inw(ahd, COMPLETE_ON_QFREEZE_HEAD);
8981         i = 0;
8982         while (!SCBID_IS_NULL(scb_index) && i++ < AHD_SCB_MAX) {
8983                 ahd_set_scbptr(ahd, scb_index);
8984                 printf("%d ", scb_index);
8985                 scb_index = ahd_inw_scbram(ahd, SCB_NEXT_COMPLETE);
8986         }
8987         printf("\n");
8988         ahd_set_scbptr(ahd, saved_scb_index);
8989         dffstat = ahd_inb(ahd, DFFSTAT);
8990         for (i = 0; i < 2; i++) {
8991 #ifdef AHD_DEBUG
8992                 struct scb *fifo_scb;
8993 #endif
8994                 u_int       fifo_scbptr;
8995
8996                 ahd_set_modes(ahd, AHD_MODE_DFF0 + i, AHD_MODE_DFF0 + i);
8997                 fifo_scbptr = ahd_get_scbptr(ahd);
8998                 printf("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
8999                        ahd_name(ahd), i,
9000                        (dffstat & (FIFO0FREE << i)) ? "Free" : "Active",
9001                        ahd_inw(ahd, LONGJMP_ADDR), fifo_scbptr);
9002                 cur_col = 0;
9003                 ahd_seqimode_print(ahd_inb(ahd, SEQIMODE), &cur_col, 50);
9004                 ahd_seqintsrc_print(ahd_inb(ahd, SEQINTSRC), &cur_col, 50);
9005                 ahd_dfcntrl_print(ahd_inb(ahd, DFCNTRL), &cur_col, 50);
9006                 ahd_dfstatus_print(ahd_inb(ahd, DFSTATUS), &cur_col, 50);
9007                 ahd_sg_cache_shadow_print(ahd_inb(ahd, SG_CACHE_SHADOW),
9008                                           &cur_col, 50);
9009                 ahd_sg_state_print(ahd_inb(ahd, SG_STATE), &cur_col, 50);
9010                 ahd_dffsxfrctl_print(ahd_inb(ahd, DFFSXFRCTL), &cur_col, 50);
9011                 ahd_soffcnt_print(ahd_inb(ahd, SOFFCNT), &cur_col, 50);
9012                 ahd_mdffstat_print(ahd_inb(ahd, MDFFSTAT), &cur_col, 50);
9013                 if (cur_col > 50) {
9014                         printf("\n");
9015                         cur_col = 0;
9016                 }
9017                 cur_col += printf("SHADDR = 0x%x%x, SHCNT = 0x%x ",
9018                                   ahd_inl(ahd, SHADDR+4),
9019                                   ahd_inl(ahd, SHADDR),
9020                                   (ahd_inb(ahd, SHCNT)
9021                                 | (ahd_inb(ahd, SHCNT + 1) << 8)
9022                                 | (ahd_inb(ahd, SHCNT + 2) << 16)));
9023                 if (cur_col > 50) {
9024                         printf("\n");
9025                         cur_col = 0;
9026                 }
9027                 cur_col += printf("HADDR = 0x%x%x, HCNT = 0x%x ",
9028                                   ahd_inl(ahd, HADDR+4),
9029                                   ahd_inl(ahd, HADDR),
9030                                   (ahd_inb(ahd, HCNT)
9031                                 | (ahd_inb(ahd, HCNT + 1) << 8)
9032                                 | (ahd_inb(ahd, HCNT + 2) << 16)));
9033                 ahd_ccsgctl_print(ahd_inb(ahd, CCSGCTL), &cur_col, 50);
9034 #ifdef AHD_DEBUG
9035                 if ((ahd_debug & AHD_SHOW_SG) != 0) {
9036                         fifo_scb = ahd_lookup_scb(ahd, fifo_scbptr);
9037                         if (fifo_scb != NULL)
9038                                 ahd_dump_sglist(fifo_scb);
9039                 }
9040 #endif
9041         }
9042         printf("\nLQIN: ");
9043         for (i = 0; i < 20; i++)
9044                 printf("0x%x ", ahd_inb(ahd, LQIN + i));
9045         printf("\n");
9046         ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
9047         printf("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n",
9048                ahd_name(ahd), ahd_inb(ahd, LQISTATE), ahd_inb(ahd, LQOSTATE),
9049                ahd_inb(ahd, OPTIONMODE));
9050         printf("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
9051                ahd_name(ahd), ahd_inb(ahd, OS_SPACE_CNT),
9052                ahd_inb(ahd, MAXCMDCNT));
9053         printf("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n",
9054                ahd_name(ahd), ahd_inb(ahd, SAVED_SCSIID),
9055                ahd_inb(ahd, SAVED_LUN));
9056         ahd_simode0_print(ahd_inb(ahd, SIMODE0), &cur_col, 50);
9057         printf("\n");
9058         ahd_set_modes(ahd, AHD_MODE_CCHAN, AHD_MODE_CCHAN);
9059         cur_col = 0;
9060         ahd_ccscbctl_print(ahd_inb(ahd, CCSCBCTL), &cur_col, 50);
9061         printf("\n");
9062         ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
9063         printf("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n",
9064                ahd_name(ahd), ahd_inw(ahd, REG0), ahd_inw(ahd, SINDEX),
9065                ahd_inw(ahd, DINDEX));
9066         printf("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n",
9067                ahd_name(ahd), ahd_get_scbptr(ahd),
9068                ahd_inw_scbram(ahd, SCB_NEXT),
9069                ahd_inw_scbram(ahd, SCB_NEXT2));
9070         printf("CDB %x %x %x %x %x %x\n",
9071                ahd_inb_scbram(ahd, SCB_CDB_STORE),
9072                ahd_inb_scbram(ahd, SCB_CDB_STORE+1),
9073                ahd_inb_scbram(ahd, SCB_CDB_STORE+2),
9074                ahd_inb_scbram(ahd, SCB_CDB_STORE+3),
9075                ahd_inb_scbram(ahd, SCB_CDB_STORE+4),
9076                ahd_inb_scbram(ahd, SCB_CDB_STORE+5));
9077         printf("STACK:");
9078         for (i = 0; i < ahd->stack_size; i++) {
9079                 ahd->saved_stack[i] =
9080                     ahd_inb(ahd, STACK)|(ahd_inb(ahd, STACK) << 8);
9081                 printf(" 0x%x", ahd->saved_stack[i]);
9082         }
9083         for (i = ahd->stack_size-1; i >= 0; i--) {
9084                 ahd_outb(ahd, STACK, ahd->saved_stack[i] & 0xFF);
9085                 ahd_outb(ahd, STACK, (ahd->saved_stack[i] >> 8) & 0xFF);
9086         }
9087         printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
9088         ahd_restore_modes(ahd, saved_modes);
9089         if (paused == 0)
9090                 ahd_unpause(ahd);
9091 }
9092
9093 void
9094 ahd_dump_scbs(struct ahd_softc *ahd)
9095 {
9096         ahd_mode_state saved_modes;
9097         u_int          saved_scb_index;
9098         int            i;
9099
9100         saved_modes = ahd_save_modes(ahd);
9101         ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
9102         saved_scb_index = ahd_get_scbptr(ahd);
9103         for (i = 0; i < AHD_SCB_MAX; i++) {
9104                 ahd_set_scbptr(ahd, i);
9105                 printf("%3d", i);
9106                 printf("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n",
9107                        ahd_inb_scbram(ahd, SCB_CONTROL),
9108                        ahd_inb_scbram(ahd, SCB_SCSIID),
9109                        ahd_inw_scbram(ahd, SCB_NEXT),
9110                        ahd_inw_scbram(ahd, SCB_NEXT2),
9111                        ahd_inl_scbram(ahd, SCB_SGPTR),
9112                        ahd_inl_scbram(ahd, SCB_RESIDUAL_SGPTR));
9113         }
9114         printf("\n");
9115         ahd_set_scbptr(ahd, saved_scb_index);
9116         ahd_restore_modes(ahd, saved_modes);
9117 }
9118
9119 /**************************** Flexport Logic **********************************/
9120 /*
9121  * Read count 16bit words from 16bit word address start_addr from the
9122  * SEEPROM attached to the controller, into buf, using the controller's
9123  * SEEPROM reading state machine.  Optionally treat the data as a byte
9124  * stream in terms of byte order.
9125  */
9126 int
9127 ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf,
9128                  u_int start_addr, u_int count, int bytestream)
9129 {
9130         u_int cur_addr;
9131         u_int end_addr;
9132         int   error;
9133
9134         /*
9135          * If we never make it through the loop even once,
9136          * we were passed invalid arguments.
9137          */
9138         error = EINVAL;
9139         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9140         end_addr = start_addr + count;
9141         for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
9142
9143                 ahd_outb(ahd, SEEADR, cur_addr);
9144                 ahd_outb(ahd, SEECTL, SEEOP_READ | SEESTART);
9145                 
9146                 error = ahd_wait_seeprom(ahd);
9147                 if (error)
9148                         break;
9149                 if (bytestream != 0) {
9150                         uint8_t *bytestream_ptr;
9151
9152                         bytestream_ptr = (uint8_t *)buf;
9153                         *bytestream_ptr++ = ahd_inb(ahd, SEEDAT);
9154                         *bytestream_ptr = ahd_inb(ahd, SEEDAT+1);
9155                 } else {
9156                         /*
9157                          * ahd_inw() already handles machine byte order.
9158                          */
9159                         *buf = ahd_inw(ahd, SEEDAT);
9160                 }
9161                 buf++;
9162         }
9163         return (error);
9164 }
9165
9166 /*
9167  * Write count 16bit words from buf, into SEEPROM attache to the
9168  * controller starting at 16bit word address start_addr, using the
9169  * controller's SEEPROM writing state machine.
9170  */
9171 int
9172 ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
9173                   u_int start_addr, u_int count)
9174 {
9175         u_int cur_addr;
9176         u_int end_addr;
9177         int   error;
9178         int   retval;
9179
9180         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9181         error = ENOENT;
9182
9183         /* Place the chip into write-enable mode */
9184         ahd_outb(ahd, SEEADR, SEEOP_EWEN_ADDR);
9185         ahd_outb(ahd, SEECTL, SEEOP_EWEN | SEESTART);
9186         error = ahd_wait_seeprom(ahd);
9187         if (error)
9188                 return (error);
9189
9190         /*
9191          * Write the data.  If we don't get throught the loop at
9192          * least once, the arguments were invalid.
9193          */
9194         retval = EINVAL;
9195         end_addr = start_addr + count;
9196         for (cur_addr = start_addr; cur_addr < end_addr; cur_addr++) {
9197                 ahd_outw(ahd, SEEDAT, *buf++);
9198                 ahd_outb(ahd, SEEADR, cur_addr);
9199                 ahd_outb(ahd, SEECTL, SEEOP_WRITE | SEESTART);
9200                 
9201                 retval = ahd_wait_seeprom(ahd);
9202                 if (retval)
9203                         break;
9204         }
9205
9206         /*
9207          * Disable writes.
9208          */
9209         ahd_outb(ahd, SEEADR, SEEOP_EWDS_ADDR);
9210         ahd_outb(ahd, SEECTL, SEEOP_EWDS | SEESTART);
9211         error = ahd_wait_seeprom(ahd);
9212         if (error)
9213                 return (error);
9214         return (retval);
9215 }
9216
9217 /*
9218  * Wait ~100us for the serial eeprom to satisfy our request.
9219  */
9220 int
9221 ahd_wait_seeprom(struct ahd_softc *ahd)
9222 {
9223         int cnt;
9224
9225         cnt = 5000;
9226         while ((ahd_inb(ahd, SEESTAT) & (SEEARBACK|SEEBUSY)) != 0 && --cnt)
9227                 ahd_delay(5);
9228
9229         if (cnt == 0)
9230                 return (ETIMEDOUT);
9231         return (0);
9232 }
9233
9234 /*
9235  * Validate the two checksums in the per_channel
9236  * vital product data struct.
9237  */
9238 int
9239 ahd_verify_vpd_cksum(struct vpd_config *vpd)
9240 {
9241         int i;
9242         int maxaddr;
9243         uint32_t checksum;
9244         uint8_t *vpdarray;
9245
9246         vpdarray = (uint8_t *)vpd;
9247         maxaddr = offsetof(struct vpd_config, vpd_checksum);
9248         checksum = 0;
9249         for (i = offsetof(struct vpd_config, resource_type); i < maxaddr; i++)
9250                 checksum = checksum + vpdarray[i];
9251         if (checksum == 0
9252          || (-checksum & 0xFF) != vpd->vpd_checksum)
9253                 return (0);
9254
9255         checksum = 0;
9256         maxaddr = offsetof(struct vpd_config, checksum);
9257         for (i = offsetof(struct vpd_config, default_target_flags);
9258              i < maxaddr; i++)
9259                 checksum = checksum + vpdarray[i];
9260         if (checksum == 0
9261          || (-checksum & 0xFF) != vpd->checksum)
9262                 return (0);
9263         return (1);
9264 }
9265
9266 int
9267 ahd_verify_cksum(struct seeprom_config *sc)
9268 {
9269         int i;
9270         int maxaddr;
9271         uint32_t checksum;
9272         uint16_t *scarray;
9273
9274         maxaddr = (sizeof(*sc)/2) - 1;
9275         checksum = 0;
9276         scarray = (uint16_t *)sc;
9277
9278         for (i = 0; i < maxaddr; i++)
9279                 checksum = checksum + scarray[i];
9280         if (checksum == 0
9281          || (checksum & 0xFFFF) != sc->checksum) {
9282                 return (0);
9283         } else {
9284                 return (1);
9285         }
9286 }
9287
9288 int
9289 ahd_acquire_seeprom(struct ahd_softc *ahd)
9290 {
9291         /*
9292          * We should be able to determine the SEEPROM type
9293          * from the flexport logic, but unfortunately not
9294          * all implementations have this logic and there is
9295          * no programatic method for determining if the logic
9296          * is present.
9297          */
9298         return (1);
9299 #if 0
9300         uint8_t seetype;
9301         int     error;
9302
9303         error = ahd_read_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, &seetype);
9304         if (error != 0
9305          || ((seetype & FLX_ROMSTAT_SEECFG) == FLX_ROMSTAT_SEE_NONE))
9306                 return (0);
9307         return (1);
9308 #endif
9309 }
9310
9311 void
9312 ahd_release_seeprom(struct ahd_softc *ahd)
9313 {
9314         /* Currently a no-op */
9315 }
9316
9317 int
9318 ahd_write_flexport(struct ahd_softc *ahd, u_int addr, u_int value)
9319 {
9320         int error;
9321
9322         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9323         if (addr > 7)
9324                 panic("ahd_write_flexport: address out of range");
9325         ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
9326         error = ahd_wait_flexport(ahd);
9327         if (error != 0)
9328                 return (error);
9329         ahd_outb(ahd, BRDDAT, value);
9330         ahd_flush_device_writes(ahd);
9331         ahd_outb(ahd, BRDCTL, BRDSTB|BRDEN|(addr << 3));
9332         ahd_flush_device_writes(ahd);
9333         ahd_outb(ahd, BRDCTL, BRDEN|(addr << 3));
9334         ahd_flush_device_writes(ahd);
9335         ahd_outb(ahd, BRDCTL, 0);
9336         ahd_flush_device_writes(ahd);
9337         return (0);
9338 }
9339
9340 int
9341 ahd_read_flexport(struct ahd_softc *ahd, u_int addr, uint8_t *value)
9342 {
9343         int     error;
9344
9345         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9346         if (addr > 7)
9347                 panic("ahd_read_flexport: address out of range");
9348         ahd_outb(ahd, BRDCTL, BRDRW|BRDEN|(addr << 3));
9349         error = ahd_wait_flexport(ahd);
9350         if (error != 0)
9351                 return (error);
9352         *value = ahd_inb(ahd, BRDDAT);
9353         ahd_outb(ahd, BRDCTL, 0);
9354         ahd_flush_device_writes(ahd);
9355         return (0);
9356 }
9357
9358 /*
9359  * Wait at most 2 seconds for flexport arbitration to succeed.
9360  */
9361 int
9362 ahd_wait_flexport(struct ahd_softc *ahd)
9363 {
9364         int cnt;
9365
9366         AHD_ASSERT_MODES(ahd, AHD_MODE_SCSI_MSK, AHD_MODE_SCSI_MSK);
9367         cnt = 1000000 * 2 / 5;
9368         while ((ahd_inb(ahd, BRDCTL) & FLXARBACK) == 0 && --cnt)
9369                 ahd_delay(5);
9370
9371         if (cnt == 0)
9372                 return (ETIMEDOUT);
9373         return (0);
9374 }
9375
9376 /************************* Target Mode ****************************************/
9377 #ifdef AHD_TARGET_MODE
9378 cam_status
9379 ahd_find_tmode_devs(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb,
9380                     struct ahd_tmode_tstate **tstate,
9381                     struct ahd_tmode_lstate **lstate,
9382                     int notfound_failure)
9383 {
9384
9385         if ((ahd->features & AHD_TARGETMODE) == 0)
9386                 return (CAM_REQ_INVALID);
9387
9388         /*
9389          * Handle the 'black hole' device that sucks up
9390          * requests to unattached luns on enabled targets.
9391          */
9392         if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
9393          && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
9394                 *tstate = NULL;
9395                 *lstate = ahd->black_hole;
9396         } else {
9397                 u_int max_id;
9398
9399                 max_id = (ahd->features & AHD_WIDE) ? 15 : 7;
9400                 if (ccb->ccb_h.target_id > max_id)
9401                         return (CAM_TID_INVALID);
9402
9403                 if (ccb->ccb_h.target_lun >= AHD_NUM_LUNS)
9404                         return (CAM_LUN_INVALID);
9405
9406                 *tstate = ahd->enabled_targets[ccb->ccb_h.target_id];
9407                 *lstate = NULL;
9408                 if (*tstate != NULL)
9409                         *lstate =
9410                             (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
9411         }
9412
9413         if (notfound_failure != 0 && *lstate == NULL)
9414                 return (CAM_PATH_INVALID);
9415
9416         return (CAM_REQ_CMP);
9417 }
9418
9419 void
9420 ahd_handle_en_lun(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb)
9421 {
9422 #if NOT_YET
9423         struct     ahd_tmode_tstate *tstate;
9424         struct     ahd_tmode_lstate *lstate;
9425         struct     ccb_en_lun *cel;
9426         cam_status status;
9427         u_int      target;
9428         u_int      lun;
9429         u_int      target_mask;
9430         u_long     s;
9431         char       channel;
9432
9433         status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate, &lstate,
9434                                      /*notfound_failure*/FALSE);
9435
9436         if (status != CAM_REQ_CMP) {
9437                 ccb->ccb_h.status = status;
9438                 return;
9439         }
9440
9441         if ((ahd->features & AHD_MULTIROLE) != 0) {
9442                 u_int      our_id;
9443
9444                 our_id = ahd->our_id;
9445                 if (ccb->ccb_h.target_id != our_id) {
9446                         if ((ahd->features & AHD_MULTI_TID) != 0
9447                          && (ahd->flags & AHD_INITIATORROLE) != 0) {
9448                                 /*
9449                                  * Only allow additional targets if
9450                                  * the initiator role is disabled.
9451                                  * The hardware cannot handle a re-select-in
9452                                  * on the initiator id during a re-select-out
9453                                  * on a different target id.
9454                                  */
9455                                 status = CAM_TID_INVALID;
9456                         } else if ((ahd->flags & AHD_INITIATORROLE) != 0
9457                                 || ahd->enabled_luns > 0) {
9458                                 /*
9459                                  * Only allow our target id to change
9460                                  * if the initiator role is not configured
9461                                  * and there are no enabled luns which
9462                                  * are attached to the currently registered
9463                                  * scsi id.
9464                                  */
9465                                 status = CAM_TID_INVALID;
9466                         }
9467                 }
9468         }
9469
9470         if (status != CAM_REQ_CMP) {
9471                 ccb->ccb_h.status = status;
9472                 return;
9473         }
9474
9475         /*
9476          * We now have an id that is valid.
9477          * If we aren't in target mode, switch modes.
9478          */
9479         if ((ahd->flags & AHD_TARGETROLE) == 0
9480          && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
9481                 u_long  s;
9482
9483                 printf("Configuring Target Mode\n");
9484                 ahd_lock(ahd, &s);
9485                 if (LIST_FIRST(&ahd->pending_scbs) != NULL) {
9486                         ccb->ccb_h.status = CAM_BUSY;
9487                         ahd_unlock(ahd, &s);
9488                         return;
9489                 }
9490                 ahd->flags |= AHD_TARGETROLE;
9491                 if ((ahd->features & AHD_MULTIROLE) == 0)
9492                         ahd->flags &= ~AHD_INITIATORROLE;
9493                 ahd_pause(ahd);
9494                 ahd_loadseq(ahd);
9495                 ahd_restart(ahd);
9496                 ahd_unlock(ahd, &s);
9497         }
9498         cel = &ccb->cel;
9499         target = ccb->ccb_h.target_id;
9500         lun = ccb->ccb_h.target_lun;
9501         channel = SIM_CHANNEL(ahd, sim);
9502         target_mask = 0x01 << target;
9503         if (channel == 'B')
9504                 target_mask <<= 8;
9505
9506         if (cel->enable != 0) {
9507                 u_int scsiseq1;
9508
9509                 /* Are we already enabled?? */
9510                 if (lstate != NULL) {
9511                         xpt_print_path(ccb->ccb_h.path);
9512                         printf("Lun already enabled\n");
9513                         ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
9514                         return;
9515                 }
9516
9517                 if (cel->grp6_len != 0
9518                  || cel->grp7_len != 0) {
9519                         /*
9520                          * Don't (yet?) support vendor
9521                          * specific commands.
9522                          */
9523                         ccb->ccb_h.status = CAM_REQ_INVALID;
9524                         printf("Non-zero Group Codes\n");
9525                         return;
9526                 }
9527
9528                 /*
9529                  * Seems to be okay.
9530                  * Setup our data structures.
9531                  */
9532                 if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
9533                         tstate = ahd_alloc_tstate(ahd, target, channel);
9534                         if (tstate == NULL) {
9535                                 xpt_print_path(ccb->ccb_h.path);
9536                                 printf("Couldn't allocate tstate\n");
9537                                 ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
9538                                 return;
9539                         }
9540                 }
9541                 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT);
9542                 if (lstate == NULL) {
9543                         xpt_print_path(ccb->ccb_h.path);
9544                         printf("Couldn't allocate lstate\n");
9545                         ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
9546                         return;
9547                 }
9548                 memset(lstate, 0, sizeof(*lstate));
9549                 status = xpt_create_path(&lstate->path, /*periph*/NULL,
9550                                          xpt_path_path_id(ccb->ccb_h.path),
9551                                          xpt_path_target_id(ccb->ccb_h.path),
9552                                          xpt_path_lun_id(ccb->ccb_h.path));
9553                 if (status != CAM_REQ_CMP) {
9554                         free(lstate, M_DEVBUF);
9555                         xpt_print_path(ccb->ccb_h.path);
9556                         printf("Couldn't allocate path\n");
9557                         ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
9558                         return;
9559                 }
9560                 SLIST_INIT(&lstate->accept_tios);
9561                 SLIST_INIT(&lstate->immed_notifies);
9562                 ahd_lock(ahd, &s);
9563                 ahd_pause(ahd);
9564                 if (target != CAM_TARGET_WILDCARD) {
9565                         tstate->enabled_luns[lun] = lstate;
9566                         ahd->enabled_luns++;
9567
9568                         if ((ahd->features & AHD_MULTI_TID) != 0) {
9569                                 u_int targid_mask;
9570
9571                                 targid_mask = ahd_inw(ahd, TARGID);
9572                                 targid_mask |= target_mask;
9573                                 ahd_outw(ahd, TARGID, targid_mask);
9574                                 ahd_update_scsiid(ahd, targid_mask);
9575                         } else {
9576                                 u_int our_id;
9577                                 char  channel;
9578
9579                                 channel = SIM_CHANNEL(ahd, sim);
9580                                 our_id = SIM_SCSI_ID(ahd, sim);
9581
9582                                 /*
9583                                  * This can only happen if selections
9584                                  * are not enabled
9585                                  */
9586                                 if (target != our_id) {
9587                                         u_int sblkctl;
9588                                         char  cur_channel;
9589                                         int   swap;
9590
9591                                         sblkctl = ahd_inb(ahd, SBLKCTL);
9592                                         cur_channel = (sblkctl & SELBUSB)
9593                                                     ? 'B' : 'A';
9594                                         if ((ahd->features & AHD_TWIN) == 0)
9595                                                 cur_channel = 'A';
9596                                         swap = cur_channel != channel;
9597                                         ahd->our_id = target;
9598
9599                                         if (swap)
9600                                                 ahd_outb(ahd, SBLKCTL,
9601                                                          sblkctl ^ SELBUSB);
9602
9603                                         ahd_outb(ahd, SCSIID, target);
9604
9605                                         if (swap)
9606                                                 ahd_outb(ahd, SBLKCTL, sblkctl);
9607                                 }
9608                         }
9609                 } else
9610                         ahd->black_hole = lstate;
9611                 /* Allow select-in operations */
9612                 if (ahd->black_hole != NULL && ahd->enabled_luns > 0) {
9613                         scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
9614                         scsiseq1 |= ENSELI;
9615                         ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
9616                         scsiseq1 = ahd_inb(ahd, SCSISEQ1);
9617                         scsiseq1 |= ENSELI;
9618                         ahd_outb(ahd, SCSISEQ1, scsiseq1);
9619                 }
9620                 ahd_unpause(ahd);
9621                 ahd_unlock(ahd, &s);
9622                 ccb->ccb_h.status = CAM_REQ_CMP;
9623                 xpt_print_path(ccb->ccb_h.path);
9624                 printf("Lun now enabled for target mode\n");
9625         } else {
9626                 struct scb *scb;
9627                 int i, empty;
9628
9629                 if (lstate == NULL) {
9630                         ccb->ccb_h.status = CAM_LUN_INVALID;
9631                         return;
9632                 }
9633
9634                 ahd_lock(ahd, &s);
9635                 
9636                 ccb->ccb_h.status = CAM_REQ_CMP;
9637                 LIST_FOREACH(scb, &ahd->pending_scbs, pending_links) {
9638                         struct ccb_hdr *ccbh;
9639
9640                         ccbh = &scb->io_ctx->ccb_h;
9641                         if (ccbh->func_code == XPT_CONT_TARGET_IO
9642                          && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
9643                                 printf("CTIO pending\n");
9644                                 ccb->ccb_h.status = CAM_REQ_INVALID;
9645                                 ahd_unlock(ahd, &s);
9646                                 return;
9647                         }
9648                 }
9649
9650                 if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
9651                         printf("ATIOs pending\n");
9652                         ccb->ccb_h.status = CAM_REQ_INVALID;
9653                 }
9654
9655                 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
9656                         printf("INOTs pending\n");
9657                         ccb->ccb_h.status = CAM_REQ_INVALID;
9658                 }
9659
9660                 if (ccb->ccb_h.status != CAM_REQ_CMP) {
9661                         ahd_unlock(ahd, &s);
9662                         return;
9663                 }
9664
9665                 xpt_print_path(ccb->ccb_h.path);
9666                 printf("Target mode disabled\n");
9667                 xpt_free_path(lstate->path);
9668                 free(lstate, M_DEVBUF);
9669
9670                 ahd_pause(ahd);
9671                 /* Can we clean up the target too? */
9672                 if (target != CAM_TARGET_WILDCARD) {
9673                         tstate->enabled_luns[lun] = NULL;
9674                         ahd->enabled_luns--;
9675                         for (empty = 1, i = 0; i < 8; i++)
9676                                 if (tstate->enabled_luns[i] != NULL) {
9677                                         empty = 0;
9678                                         break;
9679                                 }
9680
9681                         if (empty) {
9682                                 ahd_free_tstate(ahd, target, channel,
9683                                                 /*force*/FALSE);
9684                                 if (ahd->features & AHD_MULTI_TID) {
9685                                         u_int targid_mask;
9686
9687                                         targid_mask = ahd_inw(ahd, TARGID);
9688                                         targid_mask &= ~target_mask;
9689                                         ahd_outw(ahd, TARGID, targid_mask);
9690                                         ahd_update_scsiid(ahd, targid_mask);
9691                                 }
9692                         }
9693                 } else {
9694
9695                         ahd->black_hole = NULL;
9696
9697                         /*
9698                          * We can't allow selections without
9699                          * our black hole device.
9700                          */
9701                         empty = TRUE;
9702                 }
9703                 if (ahd->enabled_luns == 0) {
9704                         /* Disallow select-in */
9705                         u_int scsiseq1;
9706
9707                         scsiseq1 = ahd_inb(ahd, SCSISEQ_TEMPLATE);
9708                         scsiseq1 &= ~ENSELI;
9709                         ahd_outb(ahd, SCSISEQ_TEMPLATE, scsiseq1);
9710                         scsiseq1 = ahd_inb(ahd, SCSISEQ1);
9711                         scsiseq1 &= ~ENSELI;
9712                         ahd_outb(ahd, SCSISEQ1, scsiseq1);
9713
9714                         if ((ahd->features & AHD_MULTIROLE) == 0) {
9715                                 printf("Configuring Initiator Mode\n");
9716                                 ahd->flags &= ~AHD_TARGETROLE;
9717                                 ahd->flags |= AHD_INITIATORROLE;
9718                                 ahd_pause(ahd);
9719                                 ahd_loadseq(ahd);
9720                                 ahd_restart(ahd);
9721                                 /*
9722                                  * Unpaused.  The extra unpause
9723                                  * that follows is harmless.
9724                                  */
9725                         }
9726                 }
9727                 ahd_unpause(ahd);
9728                 ahd_unlock(ahd, &s);
9729         }
9730 #endif
9731 }
9732
9733 static void
9734 ahd_update_scsiid(struct ahd_softc *ahd, u_int targid_mask)
9735 {
9736 #if NOT_YET
9737         u_int scsiid_mask;
9738         u_int scsiid;
9739
9740         if ((ahd->features & AHD_MULTI_TID) == 0)
9741                 panic("ahd_update_scsiid called on non-multitid unit\n");
9742
9743         /*
9744          * Since we will rely on the TARGID mask
9745          * for selection enables, ensure that OID
9746          * in SCSIID is not set to some other ID
9747          * that we don't want to allow selections on.
9748          */
9749         if ((ahd->features & AHD_ULTRA2) != 0)
9750                 scsiid = ahd_inb(ahd, SCSIID_ULTRA2);
9751         else
9752                 scsiid = ahd_inb(ahd, SCSIID);
9753         scsiid_mask = 0x1 << (scsiid & OID);
9754         if ((targid_mask & scsiid_mask) == 0) {
9755                 u_int our_id;
9756
9757                 /* ffs counts from 1 */
9758                 our_id = ffs(targid_mask);
9759                 if (our_id == 0)
9760                         our_id = ahd->our_id;
9761                 else
9762                         our_id--;
9763                 scsiid &= TID;
9764                 scsiid |= our_id;
9765         }
9766         if ((ahd->features & AHD_ULTRA2) != 0)
9767                 ahd_outb(ahd, SCSIID_ULTRA2, scsiid);
9768         else
9769                 ahd_outb(ahd, SCSIID, scsiid);
9770 #endif
9771 }
9772
9773 void
9774 ahd_run_tqinfifo(struct ahd_softc *ahd, int paused)
9775 {
9776         struct target_cmd *cmd;
9777
9778         ahd_sync_tqinfifo(ahd, BUS_DMASYNC_POSTREAD);
9779         while ((cmd = &ahd->targetcmds[ahd->tqinfifonext])->cmd_valid != 0) {
9780
9781                 /*
9782                  * Only advance through the queue if we
9783                  * have the resources to process the command.
9784                  */
9785                 if (ahd_handle_target_cmd(ahd, cmd) != 0)
9786                         break;
9787
9788                 cmd->cmd_valid = 0;
9789                 ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
9790                                 ahd->shared_data_map.dmamap,
9791                                 ahd_targetcmd_offset(ahd, ahd->tqinfifonext),
9792                                 sizeof(struct target_cmd),
9793                                 BUS_DMASYNC_PREREAD);
9794                 ahd->tqinfifonext++;
9795
9796                 /*
9797                  * Lazily update our position in the target mode incoming
9798                  * command queue as seen by the sequencer.
9799                  */
9800                 if ((ahd->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
9801                         u_int hs_mailbox;
9802
9803                         hs_mailbox = ahd_inb(ahd, HS_MAILBOX);
9804                         hs_mailbox &= ~HOST_TQINPOS;
9805                         hs_mailbox |= ahd->tqinfifonext & HOST_TQINPOS;
9806                         ahd_outb(ahd, HS_MAILBOX, hs_mailbox);
9807                 }
9808         }
9809 }
9810
9811 static int
9812 ahd_handle_target_cmd(struct ahd_softc *ahd, struct target_cmd *cmd)
9813 {
9814         struct    ahd_tmode_tstate *tstate;
9815         struct    ahd_tmode_lstate *lstate;
9816         struct    ccb_accept_tio *atio;
9817         uint8_t *byte;
9818         int       initiator;
9819         int       target;
9820         int       lun;
9821
9822         initiator = SCSIID_TARGET(ahd, cmd->scsiid);
9823         target = SCSIID_OUR_ID(cmd->scsiid);
9824         lun    = (cmd->identify & MSG_IDENTIFY_LUNMASK);
9825
9826         byte = cmd->bytes;
9827         tstate = ahd->enabled_targets[target];
9828         lstate = NULL;
9829         if (tstate != NULL)
9830                 lstate = tstate->enabled_luns[lun];
9831
9832         /*
9833          * Commands for disabled luns go to the black hole driver.
9834          */
9835         if (lstate == NULL)
9836                 lstate = ahd->black_hole;
9837
9838         atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
9839         if (atio == NULL) {
9840                 ahd->flags |= AHD_TQINFIFO_BLOCKED;
9841                 /*
9842                  * Wait for more ATIOs from the peripheral driver for this lun.
9843                  */
9844                 return (1);
9845         } else
9846                 ahd->flags &= ~AHD_TQINFIFO_BLOCKED;
9847 #ifdef AHD_DEBUG
9848         if ((ahd_debug & AHD_SHOW_TQIN) != 0)
9849                 printf("Incoming command from %d for %d:%d%s\n",
9850                        initiator, target, lun,
9851                        lstate == ahd->black_hole ? "(Black Holed)" : "");
9852 #endif
9853         SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
9854
9855         if (lstate == ahd->black_hole) {
9856                 /* Fill in the wildcards */
9857                 atio->ccb_h.target_id = target;
9858                 atio->ccb_h.target_lun = lun;
9859         }
9860
9861         /*
9862          * Package it up and send it off to
9863          * whomever has this lun enabled.
9864          */
9865         atio->sense_len = 0;
9866         atio->init_id = initiator;
9867         if (byte[0] != 0xFF) {
9868                 /* Tag was included */
9869                 atio->tag_action = *byte++;
9870                 atio->tag_id = *byte++;
9871                 atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
9872         } else {
9873                 atio->ccb_h.flags = 0;
9874         }
9875         byte++;
9876
9877         /* Okay.  Now determine the cdb size based on the command code */
9878         switch (*byte >> CMD_GROUP_CODE_SHIFT) {
9879         case 0:
9880                 atio->cdb_len = 6;
9881                 break;
9882         case 1:
9883         case 2:
9884                 atio->cdb_len = 10;
9885                 break;
9886         case 4:
9887                 atio->cdb_len = 16;
9888                 break;
9889         case 5:
9890                 atio->cdb_len = 12;
9891                 break;
9892         case 3:
9893         default:
9894                 /* Only copy the opcode. */
9895                 atio->cdb_len = 1;
9896                 printf("Reserved or VU command code type encountered\n");
9897                 break;
9898         }
9899         
9900         memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);
9901
9902         atio->ccb_h.status |= CAM_CDB_RECVD;
9903
9904         if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
9905                 /*
9906                  * We weren't allowed to disconnect.
9907                  * We're hanging on the bus until a
9908                  * continue target I/O comes in response
9909                  * to this accept tio.
9910                  */
9911 #ifdef AHD_DEBUG
9912                 if ((ahd_debug & AHD_SHOW_TQIN) != 0)
9913                         printf("Received Immediate Command %d:%d:%d - %p\n",
9914                                initiator, target, lun, ahd->pending_device);
9915 #endif
9916                 ahd->pending_device = lstate;
9917                 ahd_freeze_ccb((union ccb *)atio);
9918                 atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
9919         }
9920         xpt_done((union ccb*)atio);
9921         return (0);
9922 }
9923
9924 #endif