git.oblomov.eu Git - linux-2.6/blob - drivers/ssb/main.c

   1 /*
   2  * Sonics Silicon Backplane
   3  * Subsystem core
   4  *
   5  * Copyright 2005, Broadcom Corporation
   6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include "ssb_private.h"
  12
  13 #include <linux/delay.h>
  14 #include <linux/io.h>
  15 #include <linux/ssb/ssb.h>
  16 #include <linux/ssb/ssb_regs.h>
  17 #include <linux/ssb/ssb_driver_gige.h>
  18 #include <linux/dma-mapping.h>
  19 #include <linux/pci.h>
  20
  21 #include <pcmcia/cs_types.h>
  22 #include <pcmcia/cs.h>
  23 #include <pcmcia/cistpl.h>
  24 #include <pcmcia/ds.h>
  25
  26
  27 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
  28 MODULE_LICENSE("GPL");
  29
  30
  31 /* Temporary list of yet-to-be-attached buses */
  32 static LIST_HEAD(attach_queue);
  33 /* List if running buses */
  34 static LIST_HEAD(buses);
  35 /* Software ID counter */
  36 static unsigned int next_busnumber;
  37 /* buses_mutes locks the two buslists and the next_busnumber.
  38  * Don't lock this directly, but use ssb_buses_[un]lock() below. */
  39 static DEFINE_MUTEX(buses_mutex);
  40
  41 /* There are differences in the codeflow, if the bus is
  42  * initialized from early boot, as various needed services
  43  * are not available early. This is a mechanism to delay
  44  * these initializations to after early boot has finished.
  45  * It's also used to avoid mutex locking, as that's not
  46  * available and needed early. */
  47 static bool ssb_is_early_boot = 1;
  48
  49 static void ssb_buses_lock(void);
  50 static void ssb_buses_unlock(void);
  51
  52
  53 #ifdef CONFIG_SSB_PCIHOST
  54 struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
  55 {
  56         struct ssb_bus *bus;
  57
  58         ssb_buses_lock();
  59         list_for_each_entry(bus, &buses, list) {
  60                 if (bus->bustype == SSB_BUSTYPE_PCI &&
  61                     bus->host_pci == pdev)
  62                         goto found;
  63         }
  64         bus = NULL;
  65 found:
  66         ssb_buses_unlock();
  67
  68         return bus;
  69 }
  70 #endif /* CONFIG_SSB_PCIHOST */
  71
  72 #ifdef CONFIG_SSB_PCMCIAHOST
  73 struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev)
  74 {
  75         struct ssb_bus *bus;
  76
  77         ssb_buses_lock();
  78         list_for_each_entry(bus, &buses, list) {
  79                 if (bus->bustype == SSB_BUSTYPE_PCMCIA &&
  80                     bus->host_pcmcia == pdev)
  81                         goto found;
  82         }
  83         bus = NULL;
  84 found:
  85         ssb_buses_unlock();
  86
  87         return bus;
  88 }
  89 #endif /* CONFIG_SSB_PCMCIAHOST */
  90
  91 int ssb_for_each_bus_call(unsigned long data,
  92                           int (*func)(struct ssb_bus *bus, unsigned long data))
  93 {
  94         struct ssb_bus *bus;
  95         int res;
  96
  97         ssb_buses_lock();
  98         list_for_each_entry(bus, &buses, list) {
  99                 res = func(bus, data);
 100                 if (res >= 0) {
 101                         ssb_buses_unlock();
 102                         return res;
 103                 }
 104         }
 105         ssb_buses_unlock();
 106
 107         return -ENODEV;
 108 }
 109
 110 static struct ssb_device *ssb_device_get(struct ssb_device *dev)
 111 {
 112         if (dev)
 113                 get_device(dev->dev);
 114         return dev;
 115 }
 116
 117 static void ssb_device_put(struct ssb_device *dev)
 118 {
 119         if (dev)
 120                 put_device(dev->dev);
 121 }
 122
 123 static int ssb_device_resume(struct device *dev)
 124 {
 125         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 126         struct ssb_driver *ssb_drv;
 127         int err = 0;
 128
 129         if (dev->driver) {
 130                 ssb_drv = drv_to_ssb_drv(dev->driver);
 131                 if (ssb_drv && ssb_drv->resume)
 132                         err = ssb_drv->resume(ssb_dev);
 133                 if (err)
 134                         goto out;
 135         }
 136 out:
 137         return err;
 138 }
 139
 140 static int ssb_device_suspend(struct device *dev, pm_message_t state)
 141 {
 142         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 143         struct ssb_driver *ssb_drv;
 144         int err = 0;
 145
 146         if (dev->driver) {
 147                 ssb_drv = drv_to_ssb_drv(dev->driver);
 148                 if (ssb_drv && ssb_drv->suspend)
 149                         err = ssb_drv->suspend(ssb_dev, state);
 150                 if (err)
 151                         goto out;
 152         }
 153 out:
 154         return err;
 155 }
 156
 157 int ssb_bus_resume(struct ssb_bus *bus)
 158 {
 159         int err;
 160
 161         /* Reset HW state information in memory, so that HW is
 162          * completely reinitialized. */
 163         bus->mapped_device = NULL;
 164 #ifdef CONFIG_SSB_DRIVER_PCICORE
 165         bus->pcicore.setup_done = 0;
 166 #endif
 167
 168         err = ssb_bus_powerup(bus, 0);
 169         if (err)
 170                 return err;
 171         err = ssb_pcmcia_hardware_setup(bus);
 172         if (err) {
 173                 ssb_bus_may_powerdown(bus);
 174                 return err;
 175         }
 176         ssb_chipco_resume(&bus->chipco);
 177         ssb_bus_may_powerdown(bus);
 178
 179         return 0;
 180 }
 181 EXPORT_SYMBOL(ssb_bus_resume);
 182
 183 int ssb_bus_suspend(struct ssb_bus *bus)
 184 {
 185         ssb_chipco_suspend(&bus->chipco);
 186         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 187
 188         return 0;
 189 }
 190 EXPORT_SYMBOL(ssb_bus_suspend);
 191
 192 #ifdef CONFIG_SSB_SPROM
 193 int ssb_devices_freeze(struct ssb_bus *bus)
 194 {
 195         struct ssb_device *dev;
 196         struct ssb_driver *drv;
 197         int err = 0;
 198         int i;
 199         pm_message_t state = PMSG_FREEZE;
 200
 201         /* First check that we are capable to freeze all devices. */
 202         for (i = 0; i < bus->nr_devices; i++) {
 203                 dev = &(bus->devices[i]);
 204                 if (!dev->dev ||
 205                     !dev->dev->driver ||
 206                     !device_is_registered(dev->dev))
 207                         continue;
 208                 drv = drv_to_ssb_drv(dev->dev->driver);
 209                 if (!drv)
 210                         continue;
 211                 if (!drv->suspend) {
 212                         /* Nope, can't suspend this one. */
 213                         return -EOPNOTSUPP;
 214                 }
 215         }
 216         /* Now suspend all devices */
 217         for (i = 0; i < bus->nr_devices; i++) {
 218                 dev = &(bus->devices[i]);
 219                 if (!dev->dev ||
 220                     !dev->dev->driver ||
 221                     !device_is_registered(dev->dev))
 222                         continue;
 223                 drv = drv_to_ssb_drv(dev->dev->driver);
 224                 if (!drv)
 225                         continue;
 226                 err = drv->suspend(dev, state);
 227                 if (err) {
 228                         ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 229                                    dev->dev->bus_id);
 230                         goto err_unwind;
 231                 }
 232         }
 233
 234         return 0;
 235 err_unwind:
 236         for (i--; i >= 0; i--) {
 237                 dev = &(bus->devices[i]);
 238                 if (!dev->dev ||
 239                     !dev->dev->driver ||
 240                     !device_is_registered(dev->dev))
 241                         continue;
 242                 drv = drv_to_ssb_drv(dev->dev->driver);
 243                 if (!drv)
 244                         continue;
 245                 if (drv->resume)
 246                         drv->resume(dev);
 247         }
 248         return err;
 249 }
 250
 251 int ssb_devices_thaw(struct ssb_bus *bus)
 252 {
 253         struct ssb_device *dev;
 254         struct ssb_driver *drv;
 255         int err;
 256         int i;
 257
 258         for (i = 0; i < bus->nr_devices; i++) {
 259                 dev = &(bus->devices[i]);
 260                 if (!dev->dev ||
 261                     !dev->dev->driver ||
 262                     !device_is_registered(dev->dev))
 263                         continue;
 264                 drv = drv_to_ssb_drv(dev->dev->driver);
 265                 if (!drv)
 266                         continue;
 267                 if (SSB_WARN_ON(!drv->resume))
 268                         continue;
 269                 err = drv->resume(dev);
 270                 if (err) {
 271                         ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
 272                                    dev->dev->bus_id);
 273                 }
 274         }
 275
 276         return 0;
 277 }
 278 #endif /* CONFIG_SSB_SPROM */
 279
 280 static void ssb_device_shutdown(struct device *dev)
 281 {
 282         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 283         struct ssb_driver *ssb_drv;
 284
 285         if (!dev->driver)
 286                 return;
 287         ssb_drv = drv_to_ssb_drv(dev->driver);
 288         if (ssb_drv && ssb_drv->shutdown)
 289                 ssb_drv->shutdown(ssb_dev);
 290 }
 291
 292 static int ssb_device_remove(struct device *dev)
 293 {
 294         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 295         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 296
 297         if (ssb_drv && ssb_drv->remove)
 298                 ssb_drv->remove(ssb_dev);
 299         ssb_device_put(ssb_dev);
 300
 301         return 0;
 302 }
 303
 304 static int ssb_device_probe(struct device *dev)
 305 {
 306         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 307         struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver);
 308         int err = 0;
 309
 310         ssb_device_get(ssb_dev);
 311         if (ssb_drv && ssb_drv->probe)
 312                 err = ssb_drv->probe(ssb_dev, &ssb_dev->id);
 313         if (err)
 314                 ssb_device_put(ssb_dev);
 315
 316         return err;
 317 }
 318
 319 static int ssb_match_devid(const struct ssb_device_id *tabid,
 320                            const struct ssb_device_id *devid)
 321 {
 322         if ((tabid->vendor != devid->vendor) &&
 323             tabid->vendor != SSB_ANY_VENDOR)
 324                 return 0;
 325         if ((tabid->coreid != devid->coreid) &&
 326             tabid->coreid != SSB_ANY_ID)
 327                 return 0;
 328         if ((tabid->revision != devid->revision) &&
 329             tabid->revision != SSB_ANY_REV)
 330                 return 0;
 331         return 1;
 332 }
 333
 334 static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 335 {
 336         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 337         struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv);
 338         const struct ssb_device_id *id;
 339
 340         for (id = ssb_drv->id_table;
 341              id->vendor || id->coreid || id->revision;
 342              id++) {
 343                 if (ssb_match_devid(id, &ssb_dev->id))
 344                         return 1; /* found */
 345         }
 346
 347         return 0;
 348 }
 349
 350 static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 351 {
 352         struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
 353
 354         if (!dev)
 355                 return -ENODEV;
 356
 357         return add_uevent_var(env,
 358                              "MODALIAS=ssb:v%04Xid%04Xrev%02X",
 359                              ssb_dev->id.vendor, ssb_dev->id.coreid,
 360                              ssb_dev->id.revision);
 361 }
 362
 363 static struct bus_type ssb_bustype = {
 364         .name           = "ssb",
 365         .match          = ssb_bus_match,
 366         .probe          = ssb_device_probe,
 367         .remove         = ssb_device_remove,
 368         .shutdown       = ssb_device_shutdown,
 369         .suspend        = ssb_device_suspend,
 370         .resume         = ssb_device_resume,
 371         .uevent         = ssb_device_uevent,
 372 };
 373
 374 static void ssb_buses_lock(void)
 375 {
 376         /* See the comment at the ssb_is_early_boot definition */
 377         if (!ssb_is_early_boot)
 378                 mutex_lock(&buses_mutex);
 379 }
 380
 381 static void ssb_buses_unlock(void)
 382 {
 383         /* See the comment at the ssb_is_early_boot definition */
 384         if (!ssb_is_early_boot)
 385                 mutex_unlock(&buses_mutex);
 386 }
 387
 388 static void ssb_devices_unregister(struct ssb_bus *bus)
 389 {
 390         struct ssb_device *sdev;
 391         int i;
 392
 393         for (i = bus->nr_devices - 1; i >= 0; i--) {
 394                 sdev = &(bus->devices[i]);
 395                 if (sdev->dev)
 396                         device_unregister(sdev->dev);
 397         }
 398 }
 399
 400 void ssb_bus_unregister(struct ssb_bus *bus)
 401 {
 402         ssb_buses_lock();
 403         ssb_devices_unregister(bus);
 404         list_del(&bus->list);
 405         ssb_buses_unlock();
 406
 407         ssb_pcmcia_exit(bus);
 408         ssb_pci_exit(bus);
 409         ssb_iounmap(bus);
 410 }
 411 EXPORT_SYMBOL(ssb_bus_unregister);
 412
 413 static void ssb_release_dev(struct device *dev)
 414 {
 415         struct __ssb_dev_wrapper *devwrap;
 416
 417         devwrap = container_of(dev, struct __ssb_dev_wrapper, dev);
 418         kfree(devwrap);
 419 }
 420
 421 static int ssb_devices_register(struct ssb_bus *bus)
 422 {
 423         struct ssb_device *sdev;
 424         struct device *dev;
 425         struct __ssb_dev_wrapper *devwrap;
 426         int i, err = 0;
 427         int dev_idx = 0;
 428
 429         for (i = 0; i < bus->nr_devices; i++) {
 430                 sdev = &(bus->devices[i]);
 431
 432                 /* We don't register SSB-system devices to the kernel,
 433                  * as the drivers for them are built into SSB. */
 434                 switch (sdev->id.coreid) {
 435                 case SSB_DEV_CHIPCOMMON:
 436                 case SSB_DEV_PCI:
 437                 case SSB_DEV_PCIE:
 438                 case SSB_DEV_PCMCIA:
 439                 case SSB_DEV_MIPS:
 440                 case SSB_DEV_MIPS_3302:
 441                 case SSB_DEV_EXTIF:
 442                         continue;
 443                 }
 444
 445                 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
 446                 if (!devwrap) {
 447                         ssb_printk(KERN_ERR PFX
 448                                    "Could not allocate device\n");
 449                         err = -ENOMEM;
 450                         goto error;
 451                 }
 452                 dev = &devwrap->dev;
 453                 devwrap->sdev = sdev;
 454
 455                 dev->release = ssb_release_dev;
 456                 dev->bus = &ssb_bustype;
 457                 snprintf(dev->bus_id, sizeof(dev->bus_id),
 458                          "ssb%u:%d", bus->busnumber, dev_idx);
 459
 460                 switch (bus->bustype) {
 461                 case SSB_BUSTYPE_PCI:
 462 #ifdef CONFIG_SSB_PCIHOST
 463                         sdev->irq = bus->host_pci->irq;
 464                         dev->parent = &bus->host_pci->dev;
 465 #endif
 466                         break;
 467                 case SSB_BUSTYPE_PCMCIA:
 468 #ifdef CONFIG_SSB_PCMCIAHOST
 469                         sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
 470                         dev->parent = &bus->host_pcmcia->dev;
 471 #endif
 472                         break;
 473                 case SSB_BUSTYPE_SSB:
 474                         break;
 475                 }
 476
 477                 sdev->dev = dev;
 478                 err = device_register(dev);
 479                 if (err) {
 480                         ssb_printk(KERN_ERR PFX
 481                                    "Could not register %s\n",
 482                                    dev->bus_id);
 483                         /* Set dev to NULL to not unregister
 484                          * dev on error unwinding. */
 485                         sdev->dev = NULL;
 486                         kfree(devwrap);
 487                         goto error;
 488                 }
 489                 dev_idx++;
 490         }
 491
 492         return 0;
 493 error:
 494         /* Unwind the already registered devices. */
 495         ssb_devices_unregister(bus);
 496         return err;
 497 }
 498
 499 /* Needs ssb_buses_lock() */
 500 static int ssb_attach_queued_buses(void)
 501 {
 502         struct ssb_bus *bus, *n;
 503         int err = 0;
 504         int drop_them_all = 0;
 505
 506         list_for_each_entry_safe(bus, n, &attach_queue, list) {
 507                 if (drop_them_all) {
 508                         list_del(&bus->list);
 509                         continue;
 510                 }
 511                 /* Can't init the PCIcore in ssb_bus_register(), as that
 512                  * is too early in boot for embedded systems
 513                  * (no udelay() available). So do it here in attach stage.
 514                  */
 515                 err = ssb_bus_powerup(bus, 0);
 516                 if (err)
 517                         goto error;
 518                 ssb_pcicore_init(&bus->pcicore);
 519                 ssb_bus_may_powerdown(bus);
 520
 521                 err = ssb_devices_register(bus);
 522 error:
 523                 if (err) {
 524                         drop_them_all = 1;
 525                         list_del(&bus->list);
 526                         continue;
 527                 }
 528                 list_move_tail(&bus->list, &buses);
 529         }
 530
 531         return err;
 532 }
 533
 534 static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset)
 535 {
 536         struct ssb_bus *bus = dev->bus;
 537
 538         offset += dev->core_index * SSB_CORE_SIZE;
 539         return readb(bus->mmio + offset);
 540 }
 541
 542 static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset)
 543 {
 544         struct ssb_bus *bus = dev->bus;
 545
 546         offset += dev->core_index * SSB_CORE_SIZE;
 547         return readw(bus->mmio + offset);
 548 }
 549
 550 static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset)
 551 {
 552         struct ssb_bus *bus = dev->bus;
 553
 554         offset += dev->core_index * SSB_CORE_SIZE;
 555         return readl(bus->mmio + offset);
 556 }
 557
 558 #ifdef CONFIG_SSB_BLOCKIO
 559 static void ssb_ssb_block_read(struct ssb_device *dev, void *buffer,
 560                                size_t count, u16 offset, u8 reg_width)
 561 {
 562         struct ssb_bus *bus = dev->bus;
 563         void __iomem *addr;
 564
 565         offset += dev->core_index * SSB_CORE_SIZE;
 566         addr = bus->mmio + offset;
 567
 568         switch (reg_width) {
 569         case sizeof(u8): {
 570                 u8 *buf = buffer;
 571
 572                 while (count) {
 573                         *buf = __raw_readb(addr);
 574                         buf++;
 575                         count--;
 576                 }
 577                 break;
 578         }
 579         case sizeof(u16): {
 580                 __le16 *buf = buffer;
 581
 582                 SSB_WARN_ON(count & 1);
 583                 while (count) {
 584                         *buf = (__force __le16)__raw_readw(addr);
 585                         buf++;
 586                         count -= 2;
 587                 }
 588                 break;
 589         }
 590         case sizeof(u32): {
 591                 __le32 *buf = buffer;
 592
 593                 SSB_WARN_ON(count & 3);
 594                 while (count) {
 595                         *buf = (__force __le32)__raw_readl(addr);
 596                         buf++;
 597                         count -= 4;
 598                 }
 599                 break;
 600         }
 601         default:
 602                 SSB_WARN_ON(1);
 603         }
 604 }
 605 #endif /* CONFIG_SSB_BLOCKIO */
 606
 607 static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value)
 608 {
 609         struct ssb_bus *bus = dev->bus;
 610
 611         offset += dev->core_index * SSB_CORE_SIZE;
 612         writeb(value, bus->mmio + offset);
 613 }
 614
 615 static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value)
 616 {
 617         struct ssb_bus *bus = dev->bus;
 618
 619         offset += dev->core_index * SSB_CORE_SIZE;
 620         writew(value, bus->mmio + offset);
 621 }
 622
 623 static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 624 {
 625         struct ssb_bus *bus = dev->bus;
 626
 627         offset += dev->core_index * SSB_CORE_SIZE;
 628         writel(value, bus->mmio + offset);
 629 }
 630
 631 #ifdef CONFIG_SSB_BLOCKIO
 632 static void ssb_ssb_block_write(struct ssb_device *dev, const void *buffer,
 633                                 size_t count, u16 offset, u8 reg_width)
 634 {
 635         struct ssb_bus *bus = dev->bus;
 636         void __iomem *addr;
 637
 638         offset += dev->core_index * SSB_CORE_SIZE;
 639         addr = bus->mmio + offset;
 640
 641         switch (reg_width) {
 642         case sizeof(u8): {
 643                 const u8 *buf = buffer;
 644
 645                 while (count) {
 646                         __raw_writeb(*buf, addr);
 647                         buf++;
 648                         count--;
 649                 }
 650                 break;
 651         }
 652         case sizeof(u16): {
 653                 const __le16 *buf = buffer;
 654
 655                 SSB_WARN_ON(count & 1);
 656                 while (count) {
 657                         __raw_writew((__force u16)(*buf), addr);
 658                         buf++;
 659                         count -= 2;
 660                 }
 661                 break;
 662         }
 663         case sizeof(u32): {
 664                 const __le32 *buf = buffer;
 665
 666                 SSB_WARN_ON(count & 3);
 667                 while (count) {
 668                         __raw_writel((__force u32)(*buf), addr);
 669                         buf++;
 670                         count -= 4;
 671                 }
 672                 break;
 673         }
 674         default:
 675                 SSB_WARN_ON(1);
 676         }
 677 }
 678 #endif /* CONFIG_SSB_BLOCKIO */
 679
 680 /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
 681 static const struct ssb_bus_ops ssb_ssb_ops = {
 682         .read8          = ssb_ssb_read8,
 683         .read16         = ssb_ssb_read16,
 684         .read32         = ssb_ssb_read32,
 685         .write8         = ssb_ssb_write8,
 686         .write16        = ssb_ssb_write16,
 687         .write32        = ssb_ssb_write32,
 688 #ifdef CONFIG_SSB_BLOCKIO
 689         .block_read     = ssb_ssb_block_read,
 690         .block_write    = ssb_ssb_block_write,
 691 #endif
 692 };
 693
 694 static int ssb_fetch_invariants(struct ssb_bus *bus,
 695                                 ssb_invariants_func_t get_invariants)
 696 {
 697         struct ssb_init_invariants iv;
 698         int err;
 699
 700         memset(&iv, 0, sizeof(iv));
 701         err = get_invariants(bus, &iv);
 702         if (err)
 703                 goto out;
 704         memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo));
 705         memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom));
 706         bus->has_cardbus_slot = iv.has_cardbus_slot;
 707 out:
 708         return err;
 709 }
 710
 711 static int ssb_bus_register(struct ssb_bus *bus,
 712                             ssb_invariants_func_t get_invariants,
 713                             unsigned long baseaddr)
 714 {
 715         int err;
 716
 717         spin_lock_init(&bus->bar_lock);
 718         INIT_LIST_HEAD(&bus->list);
 719 #ifdef CONFIG_SSB_EMBEDDED
 720         spin_lock_init(&bus->gpio_lock);
 721 #endif
 722
 723         /* Powerup the bus */
 724         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 725         if (err)
 726                 goto out;
 727         ssb_buses_lock();
 728         bus->busnumber = next_busnumber;
 729         /* Scan for devices (cores) */
 730         err = ssb_bus_scan(bus, baseaddr);
 731         if (err)
 732                 goto err_disable_xtal;
 733
 734         /* Init PCI-host device (if any) */
 735         err = ssb_pci_init(bus);
 736         if (err)
 737                 goto err_unmap;
 738         /* Init PCMCIA-host device (if any) */
 739         err = ssb_pcmcia_init(bus);
 740         if (err)
 741                 goto err_pci_exit;
 742
 743         /* Initialize basic system devices (if available) */
 744         err = ssb_bus_powerup(bus, 0);
 745         if (err)
 746                 goto err_pcmcia_exit;
 747         ssb_chipcommon_init(&bus->chipco);
 748         ssb_mipscore_init(&bus->mipscore);
 749         err = ssb_fetch_invariants(bus, get_invariants);
 750         if (err) {
 751                 ssb_bus_may_powerdown(bus);
 752                 goto err_pcmcia_exit;
 753         }
 754         ssb_bus_may_powerdown(bus);
 755
 756         /* Queue it for attach.
 757          * See the comment at the ssb_is_early_boot definition. */
 758         list_add_tail(&bus->list, &attach_queue);
 759         if (!ssb_is_early_boot) {
 760                 /* This is not early boot, so we must attach the bus now */
 761                 err = ssb_attach_queued_buses();
 762                 if (err)
 763                         goto err_dequeue;
 764         }
 765         next_busnumber++;
 766         ssb_buses_unlock();
 767
 768 out:
 769         return err;
 770
 771 err_dequeue:
 772         list_del(&bus->list);
 773 err_pcmcia_exit:
 774         ssb_pcmcia_exit(bus);
 775 err_pci_exit:
 776         ssb_pci_exit(bus);
 777 err_unmap:
 778         ssb_iounmap(bus);
 779 err_disable_xtal:
 780         ssb_buses_unlock();
 781         ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 782         return err;
 783 }
 784
 785 #ifdef CONFIG_SSB_PCIHOST
 786 int ssb_bus_pcibus_register(struct ssb_bus *bus,
 787                             struct pci_dev *host_pci)
 788 {
 789         int err;
 790
 791         bus->bustype = SSB_BUSTYPE_PCI;
 792         bus->host_pci = host_pci;
 793         bus->ops = &ssb_pci_ops;
 794
 795         err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
 796         if (!err) {
 797                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 798                            "PCI device %s\n", host_pci->dev.bus_id);
 799         }
 800
 801         return err;
 802 }
 803 EXPORT_SYMBOL(ssb_bus_pcibus_register);
 804 #endif /* CONFIG_SSB_PCIHOST */
 805
 806 #ifdef CONFIG_SSB_PCMCIAHOST
 807 int ssb_bus_pcmciabus_register(struct ssb_bus *bus,
 808                                struct pcmcia_device *pcmcia_dev,
 809                                unsigned long baseaddr)
 810 {
 811         int err;
 812
 813         bus->bustype = SSB_BUSTYPE_PCMCIA;
 814         bus->host_pcmcia = pcmcia_dev;
 815         bus->ops = &ssb_pcmcia_ops;
 816
 817         err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
 818         if (!err) {
 819                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 820                            "PCMCIA device %s\n", pcmcia_dev->devname);
 821         }
 822
 823         return err;
 824 }
 825 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 826 #endif /* CONFIG_SSB_PCMCIAHOST */
 827
 828 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 829                             unsigned long baseaddr,
 830                             ssb_invariants_func_t get_invariants)
 831 {
 832         int err;
 833
 834         bus->bustype = SSB_BUSTYPE_SSB;
 835         bus->ops = &ssb_ssb_ops;
 836
 837         err = ssb_bus_register(bus, get_invariants, baseaddr);
 838         if (!err) {
 839                 ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
 840                            "address 0x%08lX\n", baseaddr);
 841         }
 842
 843         return err;
 844 }
 845
 846 int __ssb_driver_register(struct ssb_driver *drv, struct module *owner)
 847 {
 848         drv->drv.name = drv->name;
 849         drv->drv.bus = &ssb_bustype;
 850         drv->drv.owner = owner;
 851
 852         return driver_register(&drv->drv);
 853 }
 854 EXPORT_SYMBOL(__ssb_driver_register);
 855
 856 void ssb_driver_unregister(struct ssb_driver *drv)
 857 {
 858         driver_unregister(&drv->drv);
 859 }
 860 EXPORT_SYMBOL(ssb_driver_unregister);
 861
 862 void ssb_set_devtypedata(struct ssb_device *dev, void *data)
 863 {
 864         struct ssb_bus *bus = dev->bus;
 865         struct ssb_device *ent;
 866         int i;
 867
 868         for (i = 0; i < bus->nr_devices; i++) {
 869                 ent = &(bus->devices[i]);
 870                 if (ent->id.vendor != dev->id.vendor)
 871                         continue;
 872                 if (ent->id.coreid != dev->id.coreid)
 873                         continue;
 874
 875                 ent->devtypedata = data;
 876         }
 877 }
 878 EXPORT_SYMBOL(ssb_set_devtypedata);
 879
 880 static u32 clkfactor_f6_resolve(u32 v)
 881 {
 882         /* map the magic values */
 883         switch (v) {
 884         case SSB_CHIPCO_CLK_F6_2:
 885                 return 2;
 886         case SSB_CHIPCO_CLK_F6_3:
 887                 return 3;
 888         case SSB_CHIPCO_CLK_F6_4:
 889                 return 4;
 890         case SSB_CHIPCO_CLK_F6_5:
 891                 return 5;
 892         case SSB_CHIPCO_CLK_F6_6:
 893                 return 6;
 894         case SSB_CHIPCO_CLK_F6_7:
 895                 return 7;
 896         }
 897         return 0;
 898 }
 899
 900 /* Calculate the speed the backplane would run at a given set of clockcontrol values */
 901 u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 902 {
 903         u32 n1, n2, clock, m1, m2, m3, mc;
 904
 905         n1 = (n & SSB_CHIPCO_CLK_N1);
 906         n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT);
 907
 908         switch (plltype) {
 909         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
 910                 if (m & SSB_CHIPCO_CLK_T6_MMASK)
 911                         return SSB_CHIPCO_CLK_T6_M0;
 912                 return SSB_CHIPCO_CLK_T6_M1;
 913         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 914         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 915         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 916         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 917                 n1 = clkfactor_f6_resolve(n1);
 918                 n2 += SSB_CHIPCO_CLK_F5_BIAS;
 919                 break;
 920         case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
 921                 n1 += SSB_CHIPCO_CLK_T2_BIAS;
 922                 n2 += SSB_CHIPCO_CLK_T2_BIAS;
 923                 SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
 924                 SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
 925                 break;
 926         case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
 927                 return 100000000;
 928         default:
 929                 SSB_WARN_ON(1);
 930         }
 931
 932         switch (plltype) {
 933         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 934         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 935                 clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2;
 936                 break;
 937         default:
 938                 clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2;
 939         }
 940         if (!clock)
 941                 return 0;
 942
 943         m1 = (m & SSB_CHIPCO_CLK_M1);
 944         m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT);
 945         m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT);
 946         mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT);
 947
 948         switch (plltype) {
 949         case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
 950         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
 951         case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
 952         case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */
 953                 m1 = clkfactor_f6_resolve(m1);
 954                 if ((plltype == SSB_PLLTYPE_1) ||
 955                     (plltype == SSB_PLLTYPE_3))
 956                         m2 += SSB_CHIPCO_CLK_F5_BIAS;
 957                 else
 958                         m2 = clkfactor_f6_resolve(m2);
 959                 m3 = clkfactor_f6_resolve(m3);
 960
 961                 switch (mc) {
 962                 case SSB_CHIPCO_CLK_MC_BYPASS:
 963                         return clock;
 964                 case SSB_CHIPCO_CLK_MC_M1:
 965                         return (clock / m1);
 966                 case SSB_CHIPCO_CLK_MC_M1M2:
 967                         return (clock / (m1 * m2));
 968                 case SSB_CHIPCO_CLK_MC_M1M2M3:
 969                         return (clock / (m1 * m2 * m3));
 970                 case SSB_CHIPCO_CLK_MC_M1M3:
 971                         return (clock / (m1 * m3));
 972                 }
 973                 return 0;
 974         case SSB_PLLTYPE_2:
 975                 m1 += SSB_CHIPCO_CLK_T2_BIAS;
 976                 m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
 977                 m3 += SSB_CHIPCO_CLK_T2_BIAS;
 978                 SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
 979                 SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
 980                 SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 981
 982                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
 983                         clock /= m1;
 984                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP))
 985                         clock /= m2;
 986                 if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP))
 987                         clock /= m3;
 988                 return clock;
 989         default:
 990                 SSB_WARN_ON(1);
 991         }
 992         return 0;
 993 }
 994
 995 /* Get the current speed the backplane is running at */
 996 u32 ssb_clockspeed(struct ssb_bus *bus)
 997 {
 998         u32 rate;
 999         u32 plltype;
1000         u32 clkctl_n, clkctl_m;
1001
1002         if (ssb_extif_available(&bus->extif))
1003                 ssb_extif_get_clockcontrol(&bus->extif, &plltype,
1004                                            &clkctl_n, &clkctl_m);
1005         else if (bus->chipco.dev)
1006                 ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
1007                                             &clkctl_n, &clkctl_m);
1008         else
1009                 return 0;
1010
1011         if (bus->chip_id == 0x5365) {
1012                 rate = 100000000;
1013         } else {
1014                 rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m);
1015                 if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */
1016                         rate /= 2;
1017         }
1018
1019         return rate;
1020 }
1021 EXPORT_SYMBOL(ssb_clockspeed);
1022
1023 static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
1024 {
1025         u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
1026
1027         /* The REJECT bit changed position in TMSLOW between
1028          * Backplane revisions. */
1029         switch (rev) {
1030         case SSB_IDLOW_SSBREV_22:
1031                 return SSB_TMSLOW_REJECT_22;
1032         case SSB_IDLOW_SSBREV_23:
1033                 return SSB_TMSLOW_REJECT_23;
1034         case SSB_IDLOW_SSBREV_24:     /* TODO - find the proper REJECT bits */
1035         case SSB_IDLOW_SSBREV_25:     /* same here */
1036         case SSB_IDLOW_SSBREV_26:     /* same here */
1037         case SSB_IDLOW_SSBREV_27:     /* same here */
1038                 return SSB_TMSLOW_REJECT_23;    /* this is a guess */
1039         default:
1040                 printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
1041                 WARN_ON(1);
1042         }
1043         return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
1044 }
1045
1046 int ssb_device_is_enabled(struct ssb_device *dev)
1047 {
1048         u32 val;
1049         u32 reject;
1050
1051         reject = ssb_tmslow_reject_bitmask(dev);
1052         val = ssb_read32(dev, SSB_TMSLOW);
1053         val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject;
1054
1055         return (val == SSB_TMSLOW_CLOCK);
1056 }
1057 EXPORT_SYMBOL(ssb_device_is_enabled);
1058
1059 static void ssb_flush_tmslow(struct ssb_device *dev)
1060 {
1061         /* Make _really_ sure the device has finished the TMSLOW
1062          * register write transaction, as we risk running into
1063          * a machine check exception otherwise.
1064          * Do this by reading the register back to commit the
1065          * PCI write and delay an additional usec for the device
1066          * to react to the change. */
1067         ssb_read32(dev, SSB_TMSLOW);
1068         udelay(1);
1069 }
1070
1071 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
1072 {
1073         u32 val;
1074
1075         ssb_device_disable(dev, core_specific_flags);
1076         ssb_write32(dev, SSB_TMSLOW,
1077                     SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
1078                     SSB_TMSLOW_FGC | core_specific_flags);
1079         ssb_flush_tmslow(dev);
1080
1081         /* Clear SERR if set. This is a hw bug workaround. */
1082         if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
1083                 ssb_write32(dev, SSB_TMSHIGH, 0);
1084
1085         val = ssb_read32(dev, SSB_IMSTATE);
1086         if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) {
1087                 val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO);
1088                 ssb_write32(dev, SSB_IMSTATE, val);
1089         }
1090
1091         ssb_write32(dev, SSB_TMSLOW,
1092                     SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
1093                     core_specific_flags);
1094         ssb_flush_tmslow(dev);
1095
1096         ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
1097                     core_specific_flags);
1098         ssb_flush_tmslow(dev);
1099 }
1100 EXPORT_SYMBOL(ssb_device_enable);
1101
1102 /* Wait for a bit in a register to get set or unset.
1103  * timeout is in units of ten-microseconds */
1104 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
1105                         int timeout, int set)
1106 {
1107         int i;
1108         u32 val;
1109
1110         for (i = 0; i < timeout; i++) {
1111                 val = ssb_read32(dev, reg);
1112                 if (set) {
1113                         if (val & bitmask)
1114                                 return 0;
1115                 } else {
1116                         if (!(val & bitmask))
1117                                 return 0;
1118                 }
1119                 udelay(10);
1120         }
1121         printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
1122                             "register %04X to %s.\n",
1123                bitmask, reg, (set ? "set" : "clear"));
1124
1125         return -ETIMEDOUT;
1126 }
1127
1128 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
1129 {
1130         u32 reject;
1131
1132         if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
1133                 return;
1134
1135         reject = ssb_tmslow_reject_bitmask(dev);
1136         ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
1137         ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
1138         ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
1139         ssb_write32(dev, SSB_TMSLOW,
1140                     SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
1141                     reject | SSB_TMSLOW_RESET |
1142                     core_specific_flags);
1143         ssb_flush_tmslow(dev);
1144
1145         ssb_write32(dev, SSB_TMSLOW,
1146                     reject | SSB_TMSLOW_RESET |
1147                     core_specific_flags);
1148         ssb_flush_tmslow(dev);
1149 }
1150 EXPORT_SYMBOL(ssb_device_disable);
1151
1152 u32 ssb_dma_translation(struct ssb_device *dev)
1153 {
1154         switch (dev->bus->bustype) {
1155         case SSB_BUSTYPE_SSB:
1156                 return 0;
1157         case SSB_BUSTYPE_PCI:
1158                 return SSB_PCI_DMA;
1159         default:
1160                 __ssb_dma_not_implemented(dev);
1161         }
1162         return 0;
1163 }
1164 EXPORT_SYMBOL(ssb_dma_translation);
1165
1166 int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
1167 {
1168         int err;
1169
1170         switch (dev->bus->bustype) {
1171         case SSB_BUSTYPE_PCI:
1172                 err = pci_set_dma_mask(dev->bus->host_pci, mask);
1173                 if (err)
1174                         return err;
1175                 err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
1176                 return err;
1177         case SSB_BUSTYPE_SSB:
1178                 return dma_set_mask(dev->dev, mask);
1179         default:
1180                 __ssb_dma_not_implemented(dev);
1181         }
1182         return -ENOSYS;
1183 }
1184 EXPORT_SYMBOL(ssb_dma_set_mask);
1185
1186 void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
1187                                 dma_addr_t *dma_handle, gfp_t gfp_flags)
1188 {
1189         switch (dev->bus->bustype) {
1190         case SSB_BUSTYPE_PCI:
1191                 if (gfp_flags & GFP_DMA) {
1192                         /* Workaround: The PCI API does not support passing
1193                          * a GFP flag. */
1194                         return dma_alloc_coherent(&dev->bus->host_pci->dev,
1195                                                   size, dma_handle, gfp_flags);
1196                 }
1197                 return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
1198         case SSB_BUSTYPE_SSB:
1199                 return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
1200         default:
1201                 __ssb_dma_not_implemented(dev);
1202         }
1203         return NULL;
1204 }
1205 EXPORT_SYMBOL(ssb_dma_alloc_consistent);
1206
1207 void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
1208                              void *vaddr, dma_addr_t dma_handle,
1209                              gfp_t gfp_flags)
1210 {
1211         switch (dev->bus->bustype) {
1212         case SSB_BUSTYPE_PCI:
1213                 if (gfp_flags & GFP_DMA) {
1214                         /* Workaround: The PCI API does not support passing
1215                          * a GFP flag. */
1216                         dma_free_coherent(&dev->bus->host_pci->dev,
1217                                           size, vaddr, dma_handle);
1218                         return;
1219                 }
1220                 pci_free_consistent(dev->bus->host_pci, size,
1221                                     vaddr, dma_handle);
1222                 return;
1223         case SSB_BUSTYPE_SSB:
1224                 dma_free_coherent(dev->dev, size, vaddr, dma_handle);
1225                 return;
1226         default:
1227                 __ssb_dma_not_implemented(dev);
1228         }
1229 }
1230 EXPORT_SYMBOL(ssb_dma_free_consistent);
1231
1232 int ssb_bus_may_powerdown(struct ssb_bus *bus)
1233 {
1234         struct ssb_chipcommon *cc;
1235         int err = 0;
1236
1237         /* On buses where more than one core may be working
1238          * at a time, we must not powerdown stuff if there are
1239          * still cores that may want to run. */
1240         if (bus->bustype == SSB_BUSTYPE_SSB)
1241                 goto out;
1242
1243         cc = &bus->chipco;
1244
1245         if (!cc->dev)
1246                 goto out;
1247         if (cc->dev->id.revision < 5)
1248                 goto out;
1249
1250         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
1251         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
1252         if (err)
1253                 goto error;
1254 out:
1255 #ifdef CONFIG_SSB_DEBUG
1256         bus->powered_up = 0;
1257 #endif
1258         return err;
1259 error:
1260         ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1261         goto out;
1262 }
1263 EXPORT_SYMBOL(ssb_bus_may_powerdown);
1264
1265 int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
1266 {
1267         struct ssb_chipcommon *cc;
1268         int err;
1269         enum ssb_clkmode mode;
1270
1271         err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
1272         if (err)
1273                 goto error;
1274         cc = &bus->chipco;
1275         mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
1276         ssb_chipco_set_clockmode(cc, mode);
1277
1278 #ifdef CONFIG_SSB_DEBUG
1279         bus->powered_up = 1;
1280 #endif
1281         return 0;
1282 error:
1283         ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1284         return err;
1285 }
1286 EXPORT_SYMBOL(ssb_bus_powerup);
1287
1288 u32 ssb_admatch_base(u32 adm)
1289 {
1290         u32 base = 0;
1291
1292         switch (adm & SSB_ADM_TYPE) {
1293         case SSB_ADM_TYPE0:
1294                 base = (adm & SSB_ADM_BASE0);
1295                 break;
1296         case SSB_ADM_TYPE1:
1297                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1298                 base = (adm & SSB_ADM_BASE1);
1299                 break;
1300         case SSB_ADM_TYPE2:
1301                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1302                 base = (adm & SSB_ADM_BASE2);
1303                 break;
1304         default:
1305                 SSB_WARN_ON(1);
1306         }
1307
1308         return base;
1309 }
1310 EXPORT_SYMBOL(ssb_admatch_base);
1311
1312 u32 ssb_admatch_size(u32 adm)
1313 {
1314         u32 size = 0;
1315
1316         switch (adm & SSB_ADM_TYPE) {
1317         case SSB_ADM_TYPE0:
1318                 size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
1319                 break;
1320         case SSB_ADM_TYPE1:
1321                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1322                 size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
1323                 break;
1324         case SSB_ADM_TYPE2:
1325                 SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
1326                 size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
1327                 break;
1328         default:
1329                 SSB_WARN_ON(1);
1330         }
1331         size = (1 << (size + 1));
1332
1333         return size;
1334 }
1335 EXPORT_SYMBOL(ssb_admatch_size);
1336
1337 static int __init ssb_modinit(void)
1338 {
1339         int err;
1340
1341         /* See the comment at the ssb_is_early_boot definition */
1342         ssb_is_early_boot = 0;
1343         err = bus_register(&ssb_bustype);
1344         if (err)
1345                 return err;
1346
1347         /* Maybe we already registered some buses at early boot.
1348          * Check for this and attach them
1349          */
1350         ssb_buses_lock();
1351         err = ssb_attach_queued_buses();
1352         ssb_buses_unlock();
1353         if (err)
1354                 bus_unregister(&ssb_bustype);
1355
1356         err = b43_pci_ssb_bridge_init();
1357         if (err) {
1358                 ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1359                            "initialization failed\n");
1360                 /* don't fail SSB init because of this */
1361                 err = 0;
1362         }
1363         err = ssb_gige_init();
1364         if (err) {
1365                 ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
1366                            "driver initialization failed\n");
1367                 /* don't fail SSB init because of this */
1368                 err = 0;
1369         }
1370
1371         return err;
1372 }
1373 /* ssb must be initialized after PCI but before the ssb drivers.
1374  * That means we must use some initcall between subsys_initcall
1375  * and device_initcall. */
1376 fs_initcall(ssb_modinit);
1377
1378 static void __exit ssb_modexit(void)
1379 {
1380         ssb_gige_exit();
1381         b43_pci_ssb_bridge_exit();
1382         bus_unregister(&ssb_bustype);
1383 }
1384 module_exit(ssb_modexit)