1 /* linux/net/inet/arp.c
3 * Version: $Id: arp.c,v 1.99 2001/08/30 22:55:42 davem Exp $
5 * Copyright (C) 1994 by Florian La Roche
7 * This module implements the Address Resolution Protocol ARP (RFC 826),
8 * which is used to convert IP addresses (or in the future maybe other
9 * high-level addresses) into a low-level hardware address (like an Ethernet
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version
15 * 2 of the License, or (at your option) any later version.
18 * Alan Cox : Removed the Ethernet assumptions in
20 * Alan Cox : Fixed some small errors in the ARP
22 * Alan Cox : Allow >4K in /proc
23 * Alan Cox : Make ARP add its own protocol entry
24 * Ross Martin : Rewrote arp_rcv() and arp_get_info()
25 * Stephen Henson : Add AX25 support to arp_get_info()
26 * Alan Cox : Drop data when a device is downed.
27 * Alan Cox : Use init_timer().
28 * Alan Cox : Double lock fixes.
29 * Martin Seine : Move the arphdr structure
30 * to if_arp.h for compatibility.
31 * with BSD based programs.
32 * Andrew Tridgell : Added ARP netmask code and
33 * re-arranged proxy handling.
34 * Alan Cox : Changed to use notifiers.
35 * Niibe Yutaka : Reply for this device or proxies only.
36 * Alan Cox : Don't proxy across hardware types!
37 * Jonathan Naylor : Added support for NET/ROM.
38 * Mike Shaver : RFC1122 checks.
39 * Jonathan Naylor : Only lookup the hardware address for
40 * the correct hardware type.
41 * Germano Caronni : Assorted subtle races.
42 * Craig Schlenter : Don't modify permanent entry
44 * Russ Nelson : Tidied up a few bits.
45 * Alexey Kuznetsov: Major changes to caching and behaviour,
46 * eg intelligent arp probing and
48 * of host down events.
49 * Alan Cox : Missing unlock in device events.
50 * Eckes : ARP ioctl control errors.
51 * Alexey Kuznetsov: Arp free fix.
52 * Manuel Rodriguez: Gratuitous ARP.
53 * Jonathan Layes : Added arpd support through kerneld
54 * message queue (960314)
55 * Mike Shaver : /proc/sys/net/ipv4/arp_* support
56 * Mike McLagan : Routing by source
57 * Stuart Cheshire : Metricom and grat arp fixes
58 * *** FOR 2.1 clean this up ***
59 * Lawrence V. Stefani: (08/12/96) Added FDDI support.
60 * Alan Cox : Took the AP1000 nasty FDDI hack and
61 * folded into the mainstream FDDI code.
62 * Ack spit, Linus how did you allow that
64 * Jes Sorensen : Make FDDI work again in 2.1.x and
65 * clean up the APFDDI & gen. FDDI bits.
66 * Alexey Kuznetsov: new arp state machine;
67 * now it is in net/core/neighbour.c.
68 * Krzysztof Halasa: Added Frame Relay ARP support.
69 * Arnaldo C. Melo : convert /proc/net/arp to seq_file
70 * Shmulik Hen: Split arp_send to arp_create and
71 * arp_xmit so intermediate drivers like
72 * bonding can change the skb before
73 * sending (e.g. insert 8021q tag).
74 * Harald Welte : convert to make use of jenkins hash
77 #include <linux/module.h>
78 #include <linux/types.h>
79 #include <linux/string.h>
80 #include <linux/kernel.h>
81 #include <linux/sched.h>
82 #include <linux/config.h>
83 #include <linux/socket.h>
84 #include <linux/sockios.h>
85 #include <linux/errno.h>
88 #include <linux/inet.h>
89 #include <linux/netdevice.h>
90 #include <linux/etherdevice.h>
91 #include <linux/fddidevice.h>
92 #include <linux/if_arp.h>
93 #include <linux/trdevice.h>
94 #include <linux/skbuff.h>
95 #include <linux/proc_fs.h>
96 #include <linux/seq_file.h>
97 #include <linux/stat.h>
98 #include <linux/init.h>
99 #include <linux/net.h>
100 #include <linux/rcupdate.h>
101 #include <linux/jhash.h>
103 #include <linux/sysctl.h>
107 #include <net/icmp.h>
108 #include <net/route.h>
109 #include <net/protocol.h>
111 #include <net/sock.h>
113 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
114 #include <net/ax25.h>
115 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
116 #include <net/netrom.h>
119 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
120 #include <net/atmclip.h>
121 struct neigh_table *clip_tbl_hook;
124 #include <asm/system.h>
125 #include <asm/uaccess.h>
127 #include <linux/netfilter_arp.h>
130 * Interface to generic neighbour cache.
132 static u32 arp_hash(const void *pkey, const struct net_device *dev);
133 static int arp_constructor(struct neighbour *neigh);
134 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb);
135 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb);
136 static void parp_redo(struct sk_buff *skb);
138 static struct neigh_ops arp_generic_ops = {
140 .solicit = arp_solicit,
141 .error_report = arp_error_report,
142 .output = neigh_resolve_output,
143 .connected_output = neigh_connected_output,
144 .hh_output = dev_queue_xmit,
145 .queue_xmit = dev_queue_xmit,
148 static struct neigh_ops arp_hh_ops = {
150 .solicit = arp_solicit,
151 .error_report = arp_error_report,
152 .output = neigh_resolve_output,
153 .connected_output = neigh_resolve_output,
154 .hh_output = dev_queue_xmit,
155 .queue_xmit = dev_queue_xmit,
158 static struct neigh_ops arp_direct_ops = {
160 .output = dev_queue_xmit,
161 .connected_output = dev_queue_xmit,
162 .hh_output = dev_queue_xmit,
163 .queue_xmit = dev_queue_xmit,
166 struct neigh_ops arp_broken_ops = {
168 .solicit = arp_solicit,
169 .error_report = arp_error_report,
170 .output = neigh_compat_output,
171 .connected_output = neigh_compat_output,
172 .hh_output = dev_queue_xmit,
173 .queue_xmit = dev_queue_xmit,
176 struct neigh_table arp_tbl = {
178 .entry_size = sizeof(struct neighbour) + 4,
181 .constructor = arp_constructor,
182 .proxy_redo = parp_redo,
186 .base_reachable_time = 30 * HZ,
187 .retrans_time = 1 * HZ,
188 .gc_staletime = 60 * HZ,
189 .reachable_time = 30 * HZ,
190 .delay_probe_time = 5 * HZ,
194 .anycast_delay = 1 * HZ,
195 .proxy_delay = (8 * HZ) / 10,
199 .gc_interval = 30 * HZ,
205 int arp_mc_map(u32 addr, u8 *haddr, struct net_device *dev, int dir)
211 ip_eth_mc_map(addr, haddr);
213 case ARPHRD_IEEE802_TR:
214 ip_tr_mc_map(addr, haddr);
216 case ARPHRD_INFINIBAND:
217 ip_ib_mc_map(addr, haddr);
221 memcpy(haddr, dev->broadcast, dev->addr_len);
229 static u32 arp_hash(const void *pkey, const struct net_device *dev)
231 return jhash_2words(*(u32 *)pkey, dev->ifindex, arp_tbl.hash_rnd);
234 static int arp_constructor(struct neighbour *neigh)
236 u32 addr = *(u32*)neigh->primary_key;
237 struct net_device *dev = neigh->dev;
238 struct in_device *in_dev;
239 struct neigh_parms *parms;
241 neigh->type = inet_addr_type(addr);
244 in_dev = rcu_dereference(__in_dev_get(dev));
245 if (in_dev == NULL) {
250 parms = in_dev->arp_parms;
251 __neigh_parms_put(neigh->parms);
252 neigh->parms = neigh_parms_clone(parms);
255 if (dev->hard_header == NULL) {
256 neigh->nud_state = NUD_NOARP;
257 neigh->ops = &arp_direct_ops;
258 neigh->output = neigh->ops->queue_xmit;
260 /* Good devices (checked by reading texts, but only Ethernet is
263 ARPHRD_ETHER: (ethernet, apfddi)
266 ARPHRD_METRICOM: (strip)
270 ARPHRD_IPDDP will also work, if author repairs it.
271 I did not it, because this driver does not work even
276 /* So... these "amateur" devices are hopeless.
277 The only thing, that I can say now:
278 It is very sad that we need to keep ugly obsolete
279 code to make them happy.
281 They should be moved to more reasonable state, now
282 they use rebuild_header INSTEAD OF hard_start_xmit!!!
283 Besides that, they are sort of out of date
284 (a lot of redundant clones/copies, useless in 2.1),
285 I wonder why people believe that they work.
291 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
293 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
296 neigh->ops = &arp_broken_ops;
297 neigh->output = neigh->ops->output;
302 if (neigh->type == RTN_MULTICAST) {
303 neigh->nud_state = NUD_NOARP;
304 arp_mc_map(addr, neigh->ha, dev, 1);
305 } else if (dev->flags&(IFF_NOARP|IFF_LOOPBACK)) {
306 neigh->nud_state = NUD_NOARP;
307 memcpy(neigh->ha, dev->dev_addr, dev->addr_len);
308 } else if (neigh->type == RTN_BROADCAST || dev->flags&IFF_POINTOPOINT) {
309 neigh->nud_state = NUD_NOARP;
310 memcpy(neigh->ha, dev->broadcast, dev->addr_len);
312 if (dev->hard_header_cache)
313 neigh->ops = &arp_hh_ops;
315 neigh->ops = &arp_generic_ops;
316 if (neigh->nud_state&NUD_VALID)
317 neigh->output = neigh->ops->connected_output;
319 neigh->output = neigh->ops->output;
324 static void arp_error_report(struct neighbour *neigh, struct sk_buff *skb)
326 dst_link_failure(skb);
330 static void arp_solicit(struct neighbour *neigh, struct sk_buff *skb)
334 struct net_device *dev = neigh->dev;
335 u32 target = *(u32*)neigh->primary_key;
336 int probes = atomic_read(&neigh->probes);
337 struct in_device *in_dev = in_dev_get(dev);
342 switch (IN_DEV_ARP_ANNOUNCE(in_dev)) {
344 case 0: /* By default announce any local IP */
345 if (skb && inet_addr_type(skb->nh.iph->saddr) == RTN_LOCAL)
346 saddr = skb->nh.iph->saddr;
348 case 1: /* Restrict announcements of saddr in same subnet */
351 saddr = skb->nh.iph->saddr;
352 if (inet_addr_type(saddr) == RTN_LOCAL) {
353 /* saddr should be known to target */
354 if (inet_addr_onlink(in_dev, target, saddr))
359 case 2: /* Avoid secondary IPs, get a primary/preferred one */
366 saddr = inet_select_addr(dev, target, RT_SCOPE_LINK);
368 if ((probes -= neigh->parms->ucast_probes) < 0) {
369 if (!(neigh->nud_state&NUD_VALID))
370 printk(KERN_DEBUG "trying to ucast probe in NUD_INVALID\n");
372 read_lock_bh(&neigh->lock);
373 } else if ((probes -= neigh->parms->app_probes) < 0) {
380 arp_send(ARPOP_REQUEST, ETH_P_ARP, target, dev, saddr,
381 dst_ha, dev->dev_addr, NULL);
383 read_unlock_bh(&neigh->lock);
386 static int arp_ignore(struct in_device *in_dev, struct net_device *dev,
391 switch (IN_DEV_ARP_IGNORE(in_dev)) {
392 case 0: /* Reply, the tip is already validated */
394 case 1: /* Reply only if tip is configured on the incoming interface */
396 scope = RT_SCOPE_HOST;
399 * Reply only if tip is configured on the incoming interface
400 * and is in same subnet as sip
402 scope = RT_SCOPE_HOST;
404 case 3: /* Do not reply for scope host addresses */
406 scope = RT_SCOPE_LINK;
409 case 4: /* Reserved */
414 case 8: /* Do not reply */
419 return !inet_confirm_addr(dev, sip, tip, scope);
422 static int arp_filter(__u32 sip, __u32 tip, struct net_device *dev)
424 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
428 /*unsigned long now; */
430 if (ip_route_output_key(&rt, &fl) < 0)
432 if (rt->u.dst.dev != dev) {
433 NET_INC_STATS_BH(LINUX_MIB_ARPFILTER);
440 /* OBSOLETE FUNCTIONS */
443 * Find an arp mapping in the cache. If not found, post a request.
445 * It is very UGLY routine: it DOES NOT use skb->dst->neighbour,
446 * even if it exists. It is supposed that skb->dev was mangled
447 * by a virtual device (eql, shaper). Nobody but broken devices
448 * is allowed to use this function, it is scheduled to be removed. --ANK
451 static int arp_set_predefined(int addr_hint, unsigned char * haddr, u32 paddr, struct net_device * dev)
455 printk(KERN_DEBUG "ARP: arp called for own IP address\n");
456 memcpy(haddr, dev->dev_addr, dev->addr_len);
459 arp_mc_map(paddr, haddr, dev, 1);
462 memcpy(haddr, dev->broadcast, dev->addr_len);
469 int arp_find(unsigned char *haddr, struct sk_buff *skb)
471 struct net_device *dev = skb->dev;
476 printk(KERN_DEBUG "arp_find is called with dst==NULL\n");
481 paddr = ((struct rtable*)skb->dst)->rt_gateway;
483 if (arp_set_predefined(inet_addr_type(paddr), haddr, paddr, dev))
486 n = __neigh_lookup(&arp_tbl, &paddr, dev, 1);
490 if (n->nud_state&NUD_VALID || neigh_event_send(n, skb) == 0) {
491 read_lock_bh(&n->lock);
492 memcpy(haddr, n->ha, dev->addr_len);
493 read_unlock_bh(&n->lock);
503 /* END OF OBSOLETE FUNCTIONS */
505 int arp_bind_neighbour(struct dst_entry *dst)
507 struct net_device *dev = dst->dev;
508 struct neighbour *n = dst->neighbour;
513 u32 nexthop = ((struct rtable*)dst)->rt_gateway;
514 if (dev->flags&(IFF_LOOPBACK|IFF_POINTOPOINT))
516 n = __neigh_lookup_errno(
517 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
518 dev->type == ARPHRD_ATM ? clip_tbl_hook :
520 &arp_tbl, &nexthop, dev);
529 * Check if we can use proxy ARP for this path
532 static inline int arp_fwd_proxy(struct in_device *in_dev, struct rtable *rt)
534 struct in_device *out_dev;
537 if (!IN_DEV_PROXY_ARP(in_dev))
540 if ((imi = IN_DEV_MEDIUM_ID(in_dev)) == 0)
545 /* place to check for proxy_arp for routes */
547 if ((out_dev = in_dev_get(rt->u.dst.dev)) != NULL) {
548 omi = IN_DEV_MEDIUM_ID(out_dev);
551 return (omi != imi && omi != -1);
555 * Interface to link layer: send routine and receive handler.
559 * Create an arp packet. If (dest_hw == NULL), we create a broadcast
562 struct sk_buff *arp_create(int type, int ptype, u32 dest_ip,
563 struct net_device *dev, u32 src_ip,
564 unsigned char *dest_hw, unsigned char *src_hw,
565 unsigned char *target_hw)
569 unsigned char *arp_ptr;
575 skb = alloc_skb(sizeof(struct arphdr)+ 2*(dev->addr_len+4)
576 + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
580 skb_reserve(skb, LL_RESERVED_SPACE(dev));
581 skb->nh.raw = skb->data;
582 arp = (struct arphdr *) skb_put(skb,sizeof(struct arphdr) + 2*(dev->addr_len+4));
584 skb->protocol = htons(ETH_P_ARP);
586 src_hw = dev->dev_addr;
588 dest_hw = dev->broadcast;
591 * Fill the device header for the ARP frame
593 if (dev->hard_header &&
594 dev->hard_header(skb,dev,ptype,dest_hw,src_hw,skb->len) < 0)
598 * Fill out the arp protocol part.
600 * The arp hardware type should match the device type, except for FDDI,
601 * which (according to RFC 1390) should always equal 1 (Ethernet).
604 * Exceptions everywhere. AX.25 uses the AX.25 PID value not the
605 * DIX code for the protocol. Make these device structure fields.
609 arp->ar_hrd = htons(dev->type);
610 arp->ar_pro = htons(ETH_P_IP);
613 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
615 arp->ar_hrd = htons(ARPHRD_AX25);
616 arp->ar_pro = htons(AX25_P_IP);
619 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
621 arp->ar_hrd = htons(ARPHRD_NETROM);
622 arp->ar_pro = htons(AX25_P_IP);
629 arp->ar_hrd = htons(ARPHRD_ETHER);
630 arp->ar_pro = htons(ETH_P_IP);
634 case ARPHRD_IEEE802_TR:
635 arp->ar_hrd = htons(ARPHRD_IEEE802);
636 arp->ar_pro = htons(ETH_P_IP);
641 arp->ar_hln = dev->addr_len;
643 arp->ar_op = htons(type);
645 arp_ptr=(unsigned char *)(arp+1);
647 memcpy(arp_ptr, src_hw, dev->addr_len);
648 arp_ptr+=dev->addr_len;
649 memcpy(arp_ptr, &src_ip,4);
651 if (target_hw != NULL)
652 memcpy(arp_ptr, target_hw, dev->addr_len);
654 memset(arp_ptr, 0, dev->addr_len);
655 arp_ptr+=dev->addr_len;
656 memcpy(arp_ptr, &dest_ip, 4);
666 * Send an arp packet.
668 void arp_xmit(struct sk_buff *skb)
670 /* Send it off, maybe filter it using firewalling first. */
671 NF_HOOK(NF_ARP, NF_ARP_OUT, skb, NULL, skb->dev, dev_queue_xmit);
675 * Create and send an arp packet.
677 void arp_send(int type, int ptype, u32 dest_ip,
678 struct net_device *dev, u32 src_ip,
679 unsigned char *dest_hw, unsigned char *src_hw,
680 unsigned char *target_hw)
685 * No arp on this interface.
688 if (dev->flags&IFF_NOARP)
691 skb = arp_create(type, ptype, dest_ip, dev, src_ip,
692 dest_hw, src_hw, target_hw);
700 static void parp_redo(struct sk_buff *skb)
703 arp_rcv(skb, skb->dev, NULL);
707 * Process an arp request.
710 static int arp_process(struct sk_buff *skb)
712 struct net_device *dev = skb->dev;
713 struct in_device *in_dev = in_dev_get(dev);
715 unsigned char *arp_ptr;
717 unsigned char *sha, *tha;
719 u16 dev_type = dev->type;
723 /* arp_rcv below verifies the ARP header and verifies the device
734 if (arp->ar_pro != htons(ETH_P_IP) ||
735 htons(dev_type) != arp->ar_hrd)
738 #ifdef CONFIG_NET_ETHERNET
742 case ARPHRD_IEEE802_TR:
750 #if defined(CONFIG_NET_ETHERNET) || defined(CONFIG_TR) || \
751 defined(CONFIG_FDDI) || defined(CONFIG_NET_FC)
753 * ETHERNET, Token Ring and Fibre Channel (which are IEEE 802
754 * devices, according to RFC 2625) devices will accept ARP
755 * hardware types of either 1 (Ethernet) or 6 (IEEE 802.2).
756 * This is the case also of FDDI, where the RFC 1390 says that
757 * FDDI devices should accept ARP hardware of (1) Ethernet,
758 * however, to be more robust, we'll accept both 1 (Ethernet)
761 if ((arp->ar_hrd != htons(ARPHRD_ETHER) &&
762 arp->ar_hrd != htons(ARPHRD_IEEE802)) ||
763 arp->ar_pro != htons(ETH_P_IP))
767 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
769 if (arp->ar_pro != htons(AX25_P_IP) ||
770 arp->ar_hrd != htons(ARPHRD_AX25))
773 #if defined(CONFIG_NETROM) || defined(CONFIG_NETROM_MODULE)
775 if (arp->ar_pro != htons(AX25_P_IP) ||
776 arp->ar_hrd != htons(ARPHRD_NETROM))
783 /* Understand only these message types */
785 if (arp->ar_op != htons(ARPOP_REPLY) &&
786 arp->ar_op != htons(ARPOP_REQUEST))
792 arp_ptr= (unsigned char *)(arp+1);
794 arp_ptr += dev->addr_len;
795 memcpy(&sip, arp_ptr, 4);
798 arp_ptr += dev->addr_len;
799 memcpy(&tip, arp_ptr, 4);
801 * Check for bad requests for 127.x.x.x and requests for multicast
802 * addresses. If this is one such, delete it.
804 if (LOOPBACK(tip) || MULTICAST(tip))
808 * Special case: We must set Frame Relay source Q.922 address
810 if (dev_type == ARPHRD_DLCI)
811 sha = dev->broadcast;
814 * Process entry. The idea here is we want to send a reply if it is a
815 * request for us or if it is a request for someone else that we hold
816 * a proxy for. We want to add an entry to our cache if it is a reply
817 * to us or if it is a request for our address.
818 * (The assumption for this last is that if someone is requesting our
819 * address, they are probably intending to talk to us, so it saves time
820 * if we cache their address. Their address is also probably not in
821 * our cache, since ours is not in their cache.)
823 * Putting this another way, we only care about replies if they are to
824 * us, in which case we add them to the cache. For requests, we care
825 * about those for us and those for our proxies. We reply to both,
826 * and in the case of requests for us we add the requester to the arp
830 /* Special case: IPv4 duplicate address detection packet (RFC2131) */
832 if (arp->ar_op == htons(ARPOP_REQUEST) &&
833 inet_addr_type(tip) == RTN_LOCAL &&
834 !arp_ignore(in_dev,dev,sip,tip))
835 arp_send(ARPOP_REPLY,ETH_P_ARP,tip,dev,tip,sha,dev->dev_addr,dev->dev_addr);
839 if (arp->ar_op == htons(ARPOP_REQUEST) &&
840 ip_route_input(skb, tip, sip, 0, dev) == 0) {
842 rt = (struct rtable*)skb->dst;
843 addr_type = rt->rt_type;
845 if (addr_type == RTN_LOCAL) {
846 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
851 dont_send |= arp_ignore(in_dev,dev,sip,tip);
852 if (!dont_send && IN_DEV_ARPFILTER(in_dev))
853 dont_send |= arp_filter(sip,tip,dev);
855 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
860 } else if (IN_DEV_FORWARD(in_dev)) {
861 if ((rt->rt_flags&RTCF_DNAT) ||
862 (addr_type == RTN_UNICAST && rt->u.dst.dev != dev &&
863 (arp_fwd_proxy(in_dev, rt) || pneigh_lookup(&arp_tbl, &tip, dev, 0)))) {
864 n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
868 if (skb->stamp.tv_sec == LOCALLY_ENQUEUED ||
869 skb->pkt_type == PACKET_HOST ||
870 in_dev->arp_parms->proxy_delay == 0) {
871 arp_send(ARPOP_REPLY,ETH_P_ARP,sip,dev,tip,sha,dev->dev_addr,sha);
873 pneigh_enqueue(&arp_tbl, in_dev->arp_parms, skb);
882 /* Update our ARP tables */
884 n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
886 #ifdef CONFIG_IP_ACCEPT_UNSOLICITED_ARP
887 /* Unsolicited ARP is not accepted by default.
888 It is possible, that this option should be enabled for some
889 devices (strip is candidate)
892 arp->ar_op == htons(ARPOP_REPLY) &&
893 inet_addr_type(sip) == RTN_UNICAST)
894 n = __neigh_lookup(&arp_tbl, &sip, dev, -1);
898 int state = NUD_REACHABLE;
901 /* If several different ARP replies follows back-to-back,
902 use the FIRST one. It is possible, if several proxy
903 agents are active. Taking the first reply prevents
904 arp trashing and chooses the fastest router.
906 override = time_after(jiffies, n->updated + n->parms->locktime);
908 /* Broadcast replies and request packets
909 do not assert neighbour reachability.
911 if (arp->ar_op != htons(ARPOP_REPLY) ||
912 skb->pkt_type != PACKET_HOST)
914 neigh_update(n, sha, state, override ? NEIGH_UPDATE_F_OVERRIDE : 0);
927 * Receive an arp request from the device layer.
930 int arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt)
934 /* ARP header, plus 2 device addresses, plus 2 IP addresses. */
935 if (!pskb_may_pull(skb, (sizeof(struct arphdr) +
936 (2 * dev->addr_len) +
941 if (arp->ar_hln != dev->addr_len ||
942 dev->flags & IFF_NOARP ||
943 skb->pkt_type == PACKET_OTHERHOST ||
944 skb->pkt_type == PACKET_LOOPBACK ||
948 if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
951 return NF_HOOK(NF_ARP, NF_ARP_IN, skb, dev, NULL, arp_process);
960 * User level interface (ioctl)
964 * Set (create) an ARP cache entry.
967 static int arp_req_set(struct arpreq *r, struct net_device * dev)
969 u32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
970 struct neighbour *neigh;
973 if (r->arp_flags&ATF_PUBL) {
974 u32 mask = ((struct sockaddr_in *) &r->arp_netmask)->sin_addr.s_addr;
975 if (mask && mask != 0xFFFFFFFF)
977 if (!dev && (r->arp_flags & ATF_COM)) {
978 dev = dev_getbyhwaddr(r->arp_ha.sa_family, r->arp_ha.sa_data);
983 if (pneigh_lookup(&arp_tbl, &ip, dev, 1) == NULL)
988 ipv4_devconf.proxy_arp = 1;
991 if (__in_dev_get(dev)) {
992 __in_dev_get(dev)->cnf.proxy_arp = 1;
998 if (r->arp_flags & ATF_PERM)
999 r->arp_flags |= ATF_COM;
1001 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1002 .tos = RTO_ONLINK } } };
1004 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1006 dev = rt->u.dst.dev;
1011 switch (dev->type) {
1015 * According to RFC 1390, FDDI devices should accept ARP
1016 * hardware types of 1 (Ethernet). However, to be more
1017 * robust, we'll accept hardware types of either 1 (Ethernet)
1018 * or 6 (IEEE 802.2).
1020 if (r->arp_ha.sa_family != ARPHRD_FDDI &&
1021 r->arp_ha.sa_family != ARPHRD_ETHER &&
1022 r->arp_ha.sa_family != ARPHRD_IEEE802)
1027 if (r->arp_ha.sa_family != dev->type)
1032 neigh = __neigh_lookup_errno(&arp_tbl, &ip, dev);
1033 err = PTR_ERR(neigh);
1034 if (!IS_ERR(neigh)) {
1035 unsigned state = NUD_STALE;
1036 if (r->arp_flags & ATF_PERM)
1037 state = NUD_PERMANENT;
1038 err = neigh_update(neigh, (r->arp_flags&ATF_COM) ?
1039 r->arp_ha.sa_data : NULL, state,
1040 NEIGH_UPDATE_F_OVERRIDE|
1041 NEIGH_UPDATE_F_ADMIN);
1042 neigh_release(neigh);
1047 static unsigned arp_state_to_flags(struct neighbour *neigh)
1050 if (neigh->nud_state&NUD_PERMANENT)
1051 flags = ATF_PERM|ATF_COM;
1052 else if (neigh->nud_state&NUD_VALID)
1058 * Get an ARP cache entry.
1061 static int arp_req_get(struct arpreq *r, struct net_device *dev)
1063 u32 ip = ((struct sockaddr_in *) &r->arp_pa)->sin_addr.s_addr;
1064 struct neighbour *neigh;
1067 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1069 read_lock_bh(&neigh->lock);
1070 memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len);
1071 r->arp_flags = arp_state_to_flags(neigh);
1072 read_unlock_bh(&neigh->lock);
1073 r->arp_ha.sa_family = dev->type;
1074 strlcpy(r->arp_dev, dev->name, sizeof(r->arp_dev));
1075 neigh_release(neigh);
1081 static int arp_req_delete(struct arpreq *r, struct net_device * dev)
1084 u32 ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
1085 struct neighbour *neigh;
1087 if (r->arp_flags & ATF_PUBL) {
1089 ((struct sockaddr_in *)&r->arp_netmask)->sin_addr.s_addr;
1090 if (mask == 0xFFFFFFFF)
1091 return pneigh_delete(&arp_tbl, &ip, dev);
1094 ipv4_devconf.proxy_arp = 0;
1097 if (__in_dev_get(dev)) {
1098 __in_dev_get(dev)->cnf.proxy_arp = 0;
1107 struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip,
1108 .tos = RTO_ONLINK } } };
1110 if ((err = ip_route_output_key(&rt, &fl)) != 0)
1112 dev = rt->u.dst.dev;
1118 neigh = neigh_lookup(&arp_tbl, &ip, dev);
1120 if (neigh->nud_state&~NUD_NOARP)
1121 err = neigh_update(neigh, NULL, NUD_FAILED,
1122 NEIGH_UPDATE_F_OVERRIDE|
1123 NEIGH_UPDATE_F_ADMIN);
1124 neigh_release(neigh);
1130 * Handle an ARP layer I/O control request.
1133 int arp_ioctl(unsigned int cmd, void __user *arg)
1137 struct net_device *dev = NULL;
1142 if (!capable(CAP_NET_ADMIN))
1145 err = copy_from_user(&r, arg, sizeof(struct arpreq));
1153 if (r.arp_pa.sa_family != AF_INET)
1154 return -EPFNOSUPPORT;
1156 if (!(r.arp_flags & ATF_PUBL) &&
1157 (r.arp_flags & (ATF_NETMASK|ATF_DONTPUB)))
1159 if (!(r.arp_flags & ATF_NETMASK))
1160 ((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
1161 htonl(0xFFFFFFFFUL);
1165 if ((dev = __dev_get_by_name(r.arp_dev)) == NULL)
1168 /* Mmmm... It is wrong... ARPHRD_NETROM==0 */
1169 if (!r.arp_ha.sa_family)
1170 r.arp_ha.sa_family = dev->type;
1172 if ((r.arp_flags & ATF_COM) && r.arp_ha.sa_family != dev->type)
1174 } else if (cmd == SIOCGARP) {
1181 err = arp_req_delete(&r, dev);
1184 err = arp_req_set(&r, dev);
1187 err = arp_req_get(&r, dev);
1188 if (!err && copy_to_user(arg, &r, sizeof(r)))
1197 static int arp_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
1199 struct net_device *dev = ptr;
1202 case NETDEV_CHANGEADDR:
1203 neigh_changeaddr(&arp_tbl, dev);
1213 static struct notifier_block arp_netdev_notifier = {
1214 .notifier_call = arp_netdev_event,
1217 /* Note, that it is not on notifier chain.
1218 It is necessary, that this routine was called after route cache will be
1221 void arp_ifdown(struct net_device *dev)
1223 neigh_ifdown(&arp_tbl, dev);
1228 * Called once on startup.
1231 static struct packet_type arp_packet_type = {
1232 .type = __constant_htons(ETH_P_ARP),
1236 static int arp_proc_init(void);
1238 void __init arp_init(void)
1240 neigh_table_init(&arp_tbl);
1242 dev_add_pack(&arp_packet_type);
1244 #ifdef CONFIG_SYSCTL
1245 neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
1246 NET_IPV4_NEIGH, "ipv4", NULL, NULL);
1248 register_netdevice_notifier(&arp_netdev_notifier);
1251 #ifdef CONFIG_PROC_FS
1252 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1254 /* ------------------------------------------------------------------------ */
1256 * ax25 -> ASCII conversion
1258 static char *ax2asc2(ax25_address *a, char *buf)
1263 for (n = 0, s = buf; n < 6; n++) {
1264 c = (a->ax25_call[n] >> 1) & 0x7F;
1266 if (c != ' ') *s++ = c;
1271 if ((n = ((a->ax25_call[6] >> 1) & 0x0F)) > 9) {
1279 if (*buf == '\0' || *buf == '-')
1285 #endif /* CONFIG_AX25 */
1287 #define HBUFFERLEN 30
1289 static void arp_format_neigh_entry(struct seq_file *seq,
1290 struct neighbour *n)
1292 char hbuffer[HBUFFERLEN];
1293 const char hexbuf[] = "0123456789ABCDEF";
1296 struct net_device *dev = n->dev;
1297 int hatype = dev->type;
1299 read_lock(&n->lock);
1300 /* Convert hardware address to XX:XX:XX:XX ... form. */
1301 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1302 if (hatype == ARPHRD_AX25 || hatype == ARPHRD_NETROM)
1303 ax2asc2((ax25_address *)n->ha, hbuffer);
1306 for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
1307 hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
1308 hbuffer[k++] = hexbuf[n->ha[j] & 15];
1312 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
1315 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->primary_key));
1316 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1317 tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
1318 read_unlock(&n->lock);
1321 static void arp_format_pneigh_entry(struct seq_file *seq,
1322 struct pneigh_entry *n)
1324 struct net_device *dev = n->dev;
1325 int hatype = dev ? dev->type : 0;
1328 sprintf(tbuf, "%u.%u.%u.%u", NIPQUAD(*(u32*)n->key));
1329 seq_printf(seq, "%-16s 0x%-10x0x%-10x%s * %s\n",
1330 tbuf, hatype, ATF_PUBL | ATF_PERM, "00:00:00:00:00:00",
1331 dev ? dev->name : "*");
1334 static int arp_seq_show(struct seq_file *seq, void *v)
1336 if (v == SEQ_START_TOKEN) {
1337 seq_puts(seq, "IP address HW type Flags "
1338 "HW address Mask Device\n");
1340 struct neigh_seq_state *state = seq->private;
1342 if (state->flags & NEIGH_SEQ_IS_PNEIGH)
1343 arp_format_pneigh_entry(seq, v);
1345 arp_format_neigh_entry(seq, v);
1351 static void *arp_seq_start(struct seq_file *seq, loff_t *pos)
1353 /* Don't want to confuse "arp -a" w/ magic entries,
1354 * so we tell the generic iterator to skip NUD_NOARP.
1356 return neigh_seq_start(seq, pos, &arp_tbl, NEIGH_SEQ_SKIP_NOARP);
1359 /* ------------------------------------------------------------------------ */
1361 static struct seq_operations arp_seq_ops = {
1362 .start = arp_seq_start,
1363 .next = neigh_seq_next,
1364 .stop = neigh_seq_stop,
1365 .show = arp_seq_show,
1368 static int arp_seq_open(struct inode *inode, struct file *file)
1370 struct seq_file *seq;
1372 struct neigh_seq_state *s = kmalloc(sizeof(*s), GFP_KERNEL);
1377 memset(s, 0, sizeof(*s));
1378 rc = seq_open(file, &arp_seq_ops);
1382 seq = file->private_data;
1391 static struct file_operations arp_seq_fops = {
1392 .owner = THIS_MODULE,
1393 .open = arp_seq_open,
1395 .llseek = seq_lseek,
1396 .release = seq_release_private,
1399 static int __init arp_proc_init(void)
1401 if (!proc_net_fops_create("arp", S_IRUGO, &arp_seq_fops))
1406 #else /* CONFIG_PROC_FS */
1408 static int __init arp_proc_init(void)
1413 #endif /* CONFIG_PROC_FS */
1415 EXPORT_SYMBOL(arp_broken_ops);
1416 EXPORT_SYMBOL(arp_find);
1417 EXPORT_SYMBOL(arp_rcv);
1418 EXPORT_SYMBOL(arp_create);
1419 EXPORT_SYMBOL(arp_xmit);
1420 EXPORT_SYMBOL(arp_send);
1421 EXPORT_SYMBOL(arp_tbl);
1423 #if defined(CONFIG_ATM_CLIP) || defined(CONFIG_ATM_CLIP_MODULE)
1424 EXPORT_SYMBOL(clip_tbl_hook);