2 * Apple Onboard Audio driver -- layout fabric
4 * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
6 * GPL v2, can be found in COPYING.
9 * This fabric module looks for sound codecs
10 * based on the layout-id property in the device tree.
15 #include <linux/list.h>
16 #include <linux/module.h>
18 #include "../soundbus/soundbus.h"
20 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
21 MODULE_LICENSE("GPL");
22 MODULE_DESCRIPTION("Layout-ID fabric for snd-aoa");
24 #define MAX_CODECS_PER_BUS 2
26 /* These are the connections the layout fabric
27 * knows about. It doesn't really care about the
28 * input ones, but I thought I'd separate them
29 * to give them proper names. The thing is that
30 * Apple usually will distinguish the active output
31 * by GPIOs, while the active input is set directly
32 * on the codec. Hence we here tell the codec what
33 * we think is connected. This information is hard-
35 #define CC_SPEAKERS (1<<0)
36 #define CC_HEADPHONE (1<<1)
37 #define CC_LINEOUT (1<<2)
38 #define CC_DIGITALOUT (1<<3)
39 #define CC_LINEIN (1<<4)
40 #define CC_MICROPHONE (1<<5)
41 #define CC_DIGITALIN (1<<6)
42 /* pretty bogus but users complain...
43 * This is a flag saying that the LINEOUT
44 * should be renamed to HEADPHONE.
45 * be careful with input detection! */
46 #define CC_LINEOUT_LABELLED_HEADPHONE (1<<7)
48 struct codec_connection {
49 /* CC_ flags from above */
51 /* codec dependent bit to be set in the aoa_codec.connected field.
52 * This intentionally doesn't have any generic flags because the
53 * fabric has to know the codec anyway and all codecs might have
54 * different connectors */
58 struct codec_connect_info {
60 struct codec_connection *connections;
63 #define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF (1<<0)
66 unsigned int layout_id;
67 struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
70 /* if busname is not assigned, we use 'Master' below,
71 * so that our layout table doesn't need to be filled
73 * We only assign these two if we expect to find more
74 * than one soundbus, i.e. on those machines with
75 * multiple layout-ids */
80 MODULE_ALIAS("sound-layout-36");
81 MODULE_ALIAS("sound-layout-41");
82 MODULE_ALIAS("sound-layout-45");
83 MODULE_ALIAS("sound-layout-47");
84 MODULE_ALIAS("sound-layout-48");
85 MODULE_ALIAS("sound-layout-49");
86 MODULE_ALIAS("sound-layout-50");
87 MODULE_ALIAS("sound-layout-51");
88 MODULE_ALIAS("sound-layout-56");
89 MODULE_ALIAS("sound-layout-57");
90 MODULE_ALIAS("sound-layout-58");
91 MODULE_ALIAS("sound-layout-60");
92 MODULE_ALIAS("sound-layout-61");
93 MODULE_ALIAS("sound-layout-62");
94 MODULE_ALIAS("sound-layout-64");
95 MODULE_ALIAS("sound-layout-65");
96 MODULE_ALIAS("sound-layout-66");
97 MODULE_ALIAS("sound-layout-67");
98 MODULE_ALIAS("sound-layout-68");
99 MODULE_ALIAS("sound-layout-69");
100 MODULE_ALIAS("sound-layout-70");
101 MODULE_ALIAS("sound-layout-72");
102 MODULE_ALIAS("sound-layout-76");
103 MODULE_ALIAS("sound-layout-80");
104 MODULE_ALIAS("sound-layout-82");
105 MODULE_ALIAS("sound-layout-84");
106 MODULE_ALIAS("sound-layout-86");
107 MODULE_ALIAS("sound-layout-90");
108 MODULE_ALIAS("sound-layout-92");
109 MODULE_ALIAS("sound-layout-94");
110 MODULE_ALIAS("sound-layout-96");
111 MODULE_ALIAS("sound-layout-98");
112 MODULE_ALIAS("sound-layout-100");
114 /* onyx with all but microphone connected */
115 static struct codec_connection onyx_connections_nomic[] = {
117 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
121 .connected = CC_DIGITALOUT,
125 .connected = CC_LINEIN,
128 {} /* terminate array by .connected == 0 */
131 /* onyx on machines without headphone */
132 static struct codec_connection onyx_connections_noheadphones[] = {
134 .connected = CC_SPEAKERS | CC_LINEOUT |
135 CC_LINEOUT_LABELLED_HEADPHONE,
139 .connected = CC_DIGITALOUT,
142 /* FIXME: are these correct? probably not for all the machines
143 * below ... If not this will need separating. */
145 .connected = CC_LINEIN,
149 .connected = CC_MICROPHONE,
152 {} /* terminate array by .connected == 0 */
155 /* onyx on machines with real line-out */
156 static struct codec_connection onyx_connections_reallineout[] = {
158 .connected = CC_SPEAKERS | CC_LINEOUT | CC_HEADPHONE,
162 .connected = CC_DIGITALOUT,
166 .connected = CC_LINEIN,
169 {} /* terminate array by .connected == 0 */
172 /* tas on machines without line out */
173 static struct codec_connection tas_connections_nolineout[] = {
175 .connected = CC_SPEAKERS | CC_HEADPHONE,
179 .connected = CC_LINEIN,
183 .connected = CC_MICROPHONE,
186 {} /* terminate array by .connected == 0 */
189 /* tas on machines with neither line out nor line in */
190 static struct codec_connection tas_connections_noline[] = {
192 .connected = CC_SPEAKERS | CC_HEADPHONE,
196 .connected = CC_MICROPHONE,
199 {} /* terminate array by .connected == 0 */
202 /* tas on machines without microphone */
203 static struct codec_connection tas_connections_nomic[] = {
205 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
209 .connected = CC_LINEIN,
212 {} /* terminate array by .connected == 0 */
215 /* tas on machines with everything connected */
216 static struct codec_connection tas_connections_all[] = {
218 .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
222 .connected = CC_LINEIN,
226 .connected = CC_MICROPHONE,
229 {} /* terminate array by .connected == 0 */
232 static struct codec_connection toonie_connections[] = {
234 .connected = CC_SPEAKERS | CC_HEADPHONE,
237 {} /* terminate array by .connected == 0 */
240 static struct codec_connection topaz_input[] = {
242 .connected = CC_DIGITALIN,
245 {} /* terminate array by .connected == 0 */
248 static struct codec_connection topaz_output[] = {
250 .connected = CC_DIGITALOUT,
253 {} /* terminate array by .connected == 0 */
256 static struct codec_connection topaz_inout[] = {
258 .connected = CC_DIGITALIN,
262 .connected = CC_DIGITALOUT,
265 {} /* terminate array by .connected == 0 */
268 static struct layout layouts[] = {
269 /* last PowerBooks (15" Oct 2005) */
271 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
274 .connections = onyx_connections_noheadphones,
278 .connections = topaz_input,
285 .connections = onyx_connections_reallineout,
292 .connections = topaz_input,
297 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
300 .connections = onyx_connections_noheadphones,
307 .connections = topaz_input,
310 /* PowerBook5,9 [17" Oct 2005] */
312 .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
315 .connections = onyx_connections_noheadphones,
319 .connections = topaz_input,
326 .connections = onyx_connections_noheadphones,
330 .connections = topaz_input,
333 /* Quad PowerMac (analog in, analog/digital out) */
337 .connections = onyx_connections_nomic,
340 /* Quad PowerMac (digital in) */
344 .connections = topaz_input,
346 .busname = "digital in", .pcmid = 1 },
347 /* Early 2005 PowerBook (PowerBook 5,6) */
351 .connections = tas_connections_nolineout,
358 .connections = tas_connections_nolineout,
365 .connections = tas_connections_noline,
372 .connections = tas_connections_nolineout,
379 .connections = onyx_connections_nomic,
383 .connections = topaz_input,
390 .connections = tas_connections_nolineout,
393 /* PowerMac10,1 (Mac Mini) */
397 .connections = toonie_connections,
404 .connections = onyx_connections_noheadphones,
407 /* unknown, untested, but this comes from Apple */
411 .connections = tas_connections_all,
417 .connections = tas_connections_nomic,
421 .connections = topaz_inout,
427 .connections = onyx_connections_noheadphones,
433 .connections = topaz_input,
439 .connections = onyx_connections_nomic,
445 .connections = topaz_input,
451 .connections = onyx_connections_noheadphones,
457 .connections = topaz_input,
463 .connections = onyx_connections_noheadphones,
467 .connections = topaz_output,
473 .connections = onyx_connections_noheadphones,
479 .connections = topaz_input,
485 .connections = tas_connections_nomic,
489 .connections = topaz_inout,
495 .connections = tas_connections_noline,
501 /* but it has an external mic?? how to select? */
502 .connections = onyx_connections_noheadphones,
508 .connections = toonie_connections,
514 .connections = topaz_input,
518 .connections = onyx_connections_noheadphones,
524 static struct layout *find_layout_by_id(unsigned int id)
529 while (l->layout_id) {
530 if (l->layout_id == id)
537 static void use_layout(struct layout *l)
541 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
542 if (l->codecs[i].name) {
543 request_module("snd-aoa-codec-%s", l->codecs[i].name);
546 /* now we wait for the codecs to call us back */
551 struct layout_dev_ptr {
552 struct layout_dev *ptr;
556 struct list_head list;
557 struct soundbus_dev *sdev;
558 struct device_node *sound;
559 struct aoa_codec *codecs[MAX_CODECS_PER_BUS];
560 struct layout *layout;
561 struct gpio_runtime gpio;
563 /* we need these for headphone/lineout detection */
564 struct snd_kcontrol *headphone_ctrl;
565 struct snd_kcontrol *lineout_ctrl;
566 struct snd_kcontrol *speaker_ctrl;
567 struct snd_kcontrol *headphone_detected_ctrl;
568 struct snd_kcontrol *lineout_detected_ctrl;
570 struct layout_dev_ptr selfptr_headphone;
571 struct layout_dev_ptr selfptr_lineout;
573 u32 have_lineout_detect:1,
574 have_headphone_detect:1,
575 switch_on_headphone:1,
579 static LIST_HEAD(layouts_list);
580 static int layouts_list_items;
581 /* this can go away but only if we allow multiple cards,
582 * make the fabric handle all the card stuff, etc... */
583 static struct layout_dev *layout_device;
585 #define control_info snd_ctl_boolean_mono_info
587 #define AMP_CONTROL(n, description) \
588 static int n##_control_get(struct snd_kcontrol *kcontrol, \
589 struct snd_ctl_elem_value *ucontrol) \
591 struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
592 if (gpio->methods && gpio->methods->get_##n) \
593 ucontrol->value.integer.value[0] = \
594 gpio->methods->get_##n(gpio); \
597 static int n##_control_put(struct snd_kcontrol *kcontrol, \
598 struct snd_ctl_elem_value *ucontrol) \
600 struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \
601 if (gpio->methods && gpio->methods->get_##n) \
602 gpio->methods->set_##n(gpio, \
603 !!ucontrol->value.integer.value[0]); \
606 static struct snd_kcontrol_new n##_ctl = { \
607 .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
608 .name = description, \
609 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
610 .info = control_info, \
611 .get = n##_control_get, \
612 .put = n##_control_put, \
615 AMP_CONTROL(headphone, "Headphone Switch");
616 AMP_CONTROL(speakers, "Speakers Switch");
617 AMP_CONTROL(lineout, "Line-Out Switch");
619 static int detect_choice_get(struct snd_kcontrol *kcontrol,
620 struct snd_ctl_elem_value *ucontrol)
622 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
624 switch (kcontrol->private_value) {
626 ucontrol->value.integer.value[0] = ldev->switch_on_headphone;
629 ucontrol->value.integer.value[0] = ldev->switch_on_lineout;
637 static int detect_choice_put(struct snd_kcontrol *kcontrol,
638 struct snd_ctl_elem_value *ucontrol)
640 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
642 switch (kcontrol->private_value) {
644 ldev->switch_on_headphone = !!ucontrol->value.integer.value[0];
647 ldev->switch_on_lineout = !!ucontrol->value.integer.value[0];
655 static struct snd_kcontrol_new headphone_detect_choice = {
656 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
657 .name = "Headphone Detect Autoswitch",
658 .info = control_info,
659 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
660 .get = detect_choice_get,
661 .put = detect_choice_put,
665 static struct snd_kcontrol_new lineout_detect_choice = {
666 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
667 .name = "Line-Out Detect Autoswitch",
668 .info = control_info,
669 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
670 .get = detect_choice_get,
671 .put = detect_choice_put,
675 static int detected_get(struct snd_kcontrol *kcontrol,
676 struct snd_ctl_elem_value *ucontrol)
678 struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
681 switch (kcontrol->private_value) {
683 v = ldev->gpio.methods->get_detect(&ldev->gpio,
684 AOA_NOTIFY_HEADPHONE);
687 v = ldev->gpio.methods->get_detect(&ldev->gpio,
688 AOA_NOTIFY_LINE_OUT);
693 ucontrol->value.integer.value[0] = v;
697 static struct snd_kcontrol_new headphone_detected = {
698 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
699 .name = "Headphone Detected",
700 .info = control_info,
701 .access = SNDRV_CTL_ELEM_ACCESS_READ,
706 static struct snd_kcontrol_new lineout_detected = {
707 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
708 .name = "Line-Out Detected",
709 .info = control_info,
710 .access = SNDRV_CTL_ELEM_ACCESS_READ,
715 static int check_codec(struct aoa_codec *codec,
716 struct layout_dev *ldev,
717 struct codec_connect_info *cci)
721 struct codec_connection *cc;
723 /* if the codec has a 'codec' node, we require a reference */
724 if (codec->node && (strcmp(codec->node->name, "codec") == 0)) {
725 snprintf(propname, sizeof(propname),
726 "platform-%s-codec-ref", codec->name);
727 ref = of_get_property(ldev->sound, propname, NULL);
729 printk(KERN_INFO "snd-aoa-fabric-layout: "
730 "required property %s not present\n", propname);
733 if (*ref != codec->node->linux_phandle) {
734 printk(KERN_INFO "snd-aoa-fabric-layout: "
735 "%s doesn't match!\n", propname);
739 if (layouts_list_items != 1) {
740 printk(KERN_INFO "snd-aoa-fabric-layout: "
741 "more than one soundbus, but no references.\n");
745 codec->soundbus_dev = ldev->sdev;
746 codec->gpio = &ldev->gpio;
748 cc = cci->connections;
752 printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n");
754 codec->connected = 0;
755 codec->fabric_data = cc;
757 while (cc->connected) {
758 codec->connected |= 1<<cc->codec_bit;
765 static int layout_found_codec(struct aoa_codec *codec)
767 struct layout_dev *ldev;
770 list_for_each_entry(ldev, &layouts_list, list) {
771 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
772 if (!ldev->layout->codecs[i].name)
774 if (strcmp(ldev->layout->codecs[i].name, codec->name) == 0) {
775 if (check_codec(codec,
777 &ldev->layout->codecs[i]) == 0)
785 static void layout_remove_codec(struct aoa_codec *codec)
788 /* here remove the codec from the layout dev's
791 codec->soundbus_dev = NULL;
793 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
797 static void layout_notify(void *data)
799 struct layout_dev_ptr *dptr = data;
800 struct layout_dev *ldev;
802 struct snd_kcontrol *detected, *c;
803 struct snd_card *card = aoa_get_card();
806 if (data == &ldev->selfptr_headphone) {
807 v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_HEADPHONE);
808 detected = ldev->headphone_detected_ctrl;
809 update = ldev->switch_on_headphone;
811 ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
812 ldev->gpio.methods->set_headphone(&ldev->gpio, v);
813 ldev->gpio.methods->set_lineout(&ldev->gpio, 0);
815 } else if (data == &ldev->selfptr_lineout) {
816 v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_LINE_OUT);
817 detected = ldev->lineout_detected_ctrl;
818 update = ldev->switch_on_lineout;
820 ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
821 ldev->gpio.methods->set_headphone(&ldev->gpio, 0);
822 ldev->gpio.methods->set_lineout(&ldev->gpio, v);
828 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &detected->id);
830 c = ldev->headphone_ctrl;
832 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
833 c = ldev->speaker_ctrl;
835 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
836 c = ldev->lineout_ctrl;
838 snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
842 static void layout_attached_codec(struct aoa_codec *codec)
844 struct codec_connection *cc;
845 struct snd_kcontrol *ctl;
846 int headphones, lineout;
847 struct layout_dev *ldev = layout_device;
849 /* need to add this codec to our codec array! */
851 cc = codec->fabric_data;
853 headphones = codec->gpio->methods->get_detect(codec->gpio,
854 AOA_NOTIFY_HEADPHONE);
855 lineout = codec->gpio->methods->get_detect(codec->gpio,
856 AOA_NOTIFY_LINE_OUT);
858 while (cc->connected) {
859 if (cc->connected & CC_SPEAKERS) {
860 if (headphones <= 0 && lineout <= 0)
861 ldev->gpio.methods->set_speakers(codec->gpio, 1);
862 ctl = snd_ctl_new1(&speakers_ctl, codec->gpio);
863 ldev->speaker_ctrl = ctl;
864 aoa_snd_ctl_add(ctl);
866 if (cc->connected & CC_HEADPHONE) {
868 ldev->gpio.methods->set_headphone(codec->gpio, 1);
869 ctl = snd_ctl_new1(&headphone_ctl, codec->gpio);
870 ldev->headphone_ctrl = ctl;
871 aoa_snd_ctl_add(ctl);
872 ldev->have_headphone_detect =
874 ->set_notify(&ldev->gpio,
875 AOA_NOTIFY_HEADPHONE,
877 &ldev->selfptr_headphone);
878 if (ldev->have_headphone_detect) {
879 ctl = snd_ctl_new1(&headphone_detect_choice,
881 aoa_snd_ctl_add(ctl);
882 ctl = snd_ctl_new1(&headphone_detected,
884 ldev->headphone_detected_ctrl = ctl;
885 aoa_snd_ctl_add(ctl);
888 if (cc->connected & CC_LINEOUT) {
890 ldev->gpio.methods->set_lineout(codec->gpio, 1);
891 ctl = snd_ctl_new1(&lineout_ctl, codec->gpio);
892 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
893 strlcpy(ctl->id.name,
894 "Headphone Switch", sizeof(ctl->id.name));
895 ldev->lineout_ctrl = ctl;
896 aoa_snd_ctl_add(ctl);
897 ldev->have_lineout_detect =
899 ->set_notify(&ldev->gpio,
902 &ldev->selfptr_lineout);
903 if (ldev->have_lineout_detect) {
904 ctl = snd_ctl_new1(&lineout_detect_choice,
906 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
907 strlcpy(ctl->id.name,
908 "Headphone Detect Autoswitch",
909 sizeof(ctl->id.name));
910 aoa_snd_ctl_add(ctl);
911 ctl = snd_ctl_new1(&lineout_detected,
913 if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
914 strlcpy(ctl->id.name,
915 "Headphone Detected",
916 sizeof(ctl->id.name));
917 ldev->lineout_detected_ctrl = ctl;
918 aoa_snd_ctl_add(ctl);
923 /* now update initial state */
924 if (ldev->have_headphone_detect)
925 layout_notify(&ldev->selfptr_headphone);
926 if (ldev->have_lineout_detect)
927 layout_notify(&ldev->selfptr_lineout);
930 static struct aoa_fabric layout_fabric = {
931 .name = "SoundByLayout",
932 .owner = THIS_MODULE,
933 .found_codec = layout_found_codec,
934 .remove_codec = layout_remove_codec,
935 .attached_codec = layout_attached_codec,
938 static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
940 struct device_node *sound = NULL;
941 const unsigned int *layout_id;
942 struct layout *layout;
943 struct layout_dev *ldev = NULL;
946 /* hm, currently we can only have one ... */
950 /* by breaking out we keep a reference */
951 while ((sound = of_get_next_child(sdev->ofdev.node, sound))) {
952 if (sound->type && strcasecmp(sound->type, "soundchip") == 0)
955 if (!sound) return -ENODEV;
957 layout_id = of_get_property(sound, "layout-id", NULL);
960 printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d\n",
963 layout = find_layout_by_id(*layout_id);
965 printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
969 ldev = kzalloc(sizeof(struct layout_dev), GFP_KERNEL);
973 layout_device = ldev;
976 ldev->layout = layout;
977 ldev->gpio.node = sound->parent;
978 switch (layout->layout_id) {
979 case 41: /* that unknown machine no one seems to have */
980 case 51: /* PowerBook5,4 */
981 case 58: /* Mac Mini */
982 ldev->gpio.methods = ftr_gpio_methods;
984 "snd-aoa-fabric-layout: Using direct GPIOs\n");
987 ldev->gpio.methods = pmf_gpio_methods;
989 "snd-aoa-fabric-layout: Using PMF GPIOs\n");
991 ldev->selfptr_headphone.ptr = ldev;
992 ldev->selfptr_lineout.ptr = ldev;
993 sdev->ofdev.dev.driver_data = ldev;
994 list_add(&ldev->list, &layouts_list);
995 layouts_list_items++;
997 /* assign these before registering ourselves, so
998 * callbacks that are done during registration
999 * already have the values */
1000 sdev->pcmid = ldev->layout->pcmid;
1001 if (ldev->layout->busname) {
1002 sdev->pcmname = ldev->layout->busname;
1004 sdev->pcmname = "Master";
1007 ldev->gpio.methods->init(&ldev->gpio);
1009 err = aoa_fabric_register(&layout_fabric, &sdev->ofdev.dev);
1010 if (err && err != -EALREADY) {
1011 printk(KERN_INFO "snd-aoa-fabric-layout: can't use,"
1012 " another fabric is active!\n");
1017 ldev->switch_on_headphone = 1;
1018 ldev->switch_on_lineout = 1;
1021 /* we won't be using these then... */
1022 ldev->gpio.methods->exit(&ldev->gpio);
1023 /* reset if we didn't use it */
1024 sdev->pcmname = NULL;
1026 list_del(&ldev->list);
1027 layouts_list_items--;
1030 layout_device = NULL;
1035 static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
1037 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1040 for (i=0; i<MAX_CODECS_PER_BUS; i++) {
1041 if (ldev->codecs[i]) {
1042 aoa_fabric_unlink_codec(ldev->codecs[i]);
1044 ldev->codecs[i] = NULL;
1046 list_del(&ldev->list);
1047 layouts_list_items--;
1048 of_node_put(ldev->sound);
1050 ldev->gpio.methods->set_notify(&ldev->gpio,
1051 AOA_NOTIFY_HEADPHONE,
1054 ldev->gpio.methods->set_notify(&ldev->gpio,
1055 AOA_NOTIFY_LINE_OUT,
1059 ldev->gpio.methods->exit(&ldev->gpio);
1060 layout_device = NULL;
1063 sdev->pcmname = NULL;
1068 static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
1070 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1072 if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
1073 ldev->gpio.methods->all_amps_off(&ldev->gpio);
1078 static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
1080 struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
1082 if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
1083 ldev->gpio.methods->all_amps_restore(&ldev->gpio);
1089 static struct soundbus_driver aoa_soundbus_driver = {
1090 .name = "snd_aoa_soundbus_drv",
1091 .owner = THIS_MODULE,
1092 .probe = aoa_fabric_layout_probe,
1093 .remove = aoa_fabric_layout_remove,
1095 .suspend = aoa_fabric_layout_suspend,
1096 .resume = aoa_fabric_layout_resume,
1099 .owner = THIS_MODULE,
1103 static int __init aoa_fabric_layout_init(void)
1107 err = soundbus_register_driver(&aoa_soundbus_driver);
1113 static void __exit aoa_fabric_layout_exit(void)
1115 soundbus_unregister_driver(&aoa_soundbus_driver);
1116 aoa_fabric_unregister(&layout_fabric);
1119 module_init(aoa_fabric_layout_init);
1120 module_exit(aoa_fabric_layout_exit);