USB: m66592-udc: fix use old interrupt flags
[linux-2.6] / drivers / usb / gadget / serial.c
1 /*
2  * g_serial.c -- USB gadget serial driver
3  *
4  * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
5  *
6  * This code is based in part on the Gadget Zero driver, which
7  * is Copyright (C) 2003 by David Brownell, all rights reserved.
8  *
9  * This code also borrows from usbserial.c, which is
10  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
11  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
12  * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
13  *
14  * This software is distributed under the terms of the GNU General
15  * Public License ("GPL") as published by the Free Software Foundation,
16  * either version 2 of that License or (at your option) any later version.
17  *
18  */
19
20 #include <linux/module.h>
21 #include <linux/kernel.h>
22 #include <linux/delay.h>
23 #include <linux/ioport.h>
24 #include <linux/slab.h>
25 #include <linux/errno.h>
26 #include <linux/init.h>
27 #include <linux/timer.h>
28 #include <linux/list.h>
29 #include <linux/interrupt.h>
30 #include <linux/utsname.h>
31 #include <linux/wait.h>
32 #include <linux/proc_fs.h>
33 #include <linux/device.h>
34 #include <linux/tty.h>
35 #include <linux/tty_flip.h>
36
37 #include <asm/byteorder.h>
38 #include <asm/io.h>
39 #include <asm/irq.h>
40 #include <asm/system.h>
41 #include <asm/unaligned.h>
42 #include <asm/uaccess.h>
43
44 #include <linux/usb/ch9.h>
45 #include <linux/usb/cdc.h>
46 #include <linux/usb_gadget.h>
47
48 #include "gadget_chips.h"
49
50
51 /* Defines */
52
53 #define GS_VERSION_STR                  "v2.2"
54 #define GS_VERSION_NUM                  0x0202
55
56 #define GS_LONG_NAME                    "Gadget Serial"
57 #define GS_SHORT_NAME                   "g_serial"
58
59 #define GS_MAJOR                        127
60 #define GS_MINOR_START                  0
61
62 #define GS_NUM_PORTS                    16
63
64 #define GS_NUM_CONFIGS                  1
65 #define GS_NO_CONFIG_ID                 0
66 #define GS_BULK_CONFIG_ID               1
67 #define GS_ACM_CONFIG_ID                2
68
69 #define GS_MAX_NUM_INTERFACES           2
70 #define GS_BULK_INTERFACE_ID            0
71 #define GS_CONTROL_INTERFACE_ID         0
72 #define GS_DATA_INTERFACE_ID            1
73
74 #define GS_MAX_DESC_LEN                 256
75
76 #define GS_DEFAULT_READ_Q_SIZE          32
77 #define GS_DEFAULT_WRITE_Q_SIZE         32
78
79 #define GS_DEFAULT_WRITE_BUF_SIZE       8192
80 #define GS_TMP_BUF_SIZE                 8192
81
82 #define GS_CLOSE_TIMEOUT                15
83
84 #define GS_DEFAULT_USE_ACM              0
85
86 #define GS_DEFAULT_DTE_RATE             9600
87 #define GS_DEFAULT_DATA_BITS            8
88 #define GS_DEFAULT_PARITY               USB_CDC_NO_PARITY
89 #define GS_DEFAULT_CHAR_FORMAT          USB_CDC_1_STOP_BITS
90
91 /* select highspeed/fullspeed, hiding highspeed if not configured */
92 #ifdef CONFIG_USB_GADGET_DUALSPEED
93 #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
94 #else
95 #define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
96 #endif /* CONFIG_USB_GADGET_DUALSPEED */
97
98 /* debug settings */
99 #ifdef GS_DEBUG
100 static int debug = 1;
101
102 #define gs_debug(format, arg...) \
103         do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
104 #define gs_debug_level(level, format, arg...) \
105         do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
106
107 #else
108
109 #define gs_debug(format, arg...) \
110         do { } while(0)
111 #define gs_debug_level(level, format, arg...) \
112         do { } while(0)
113
114 #endif /* GS_DEBUG */
115
116 /* Thanks to NetChip Technologies for donating this product ID.
117  *
118  * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
119  * Instead:  allocate your own, using normal USB-IF procedures.
120  */
121 #define GS_VENDOR_ID                    0x0525  /* NetChip */
122 #define GS_PRODUCT_ID                   0xa4a6  /* Linux-USB Serial Gadget */
123 #define GS_CDC_PRODUCT_ID               0xa4a7  /* ... as CDC-ACM */
124
125 #define GS_LOG2_NOTIFY_INTERVAL         5       /* 1 << 5 == 32 msec */
126 #define GS_NOTIFY_MAXPACKET             8
127
128
129 /* Structures */
130
131 struct gs_dev;
132
133 /* circular buffer */
134 struct gs_buf {
135         unsigned int            buf_size;
136         char                    *buf_buf;
137         char                    *buf_get;
138         char                    *buf_put;
139 };
140
141 /* list of requests */
142 struct gs_req_entry {
143         struct list_head        re_entry;
144         struct usb_request      *re_req;
145 };
146
147 /* the port structure holds info for each port, one for each minor number */
148 struct gs_port {
149         struct gs_dev           *port_dev;      /* pointer to device struct */
150         struct tty_struct       *port_tty;      /* pointer to tty struct */
151         spinlock_t              port_lock;
152         int                     port_num;
153         int                     port_open_count;
154         int                     port_in_use;    /* open/close in progress */
155         wait_queue_head_t       port_write_wait;/* waiting to write */
156         struct gs_buf           *port_write_buf;
157         struct usb_cdc_line_coding      port_line_coding;
158 };
159
160 /* the device structure holds info for the USB device */
161 struct gs_dev {
162         struct usb_gadget       *dev_gadget;    /* gadget device pointer */
163         spinlock_t              dev_lock;       /* lock for set/reset config */
164         int                     dev_config;     /* configuration number */
165         struct usb_ep           *dev_notify_ep; /* address of notify endpoint */
166         struct usb_ep           *dev_in_ep;     /* address of in endpoint */
167         struct usb_ep           *dev_out_ep;    /* address of out endpoint */
168         struct usb_endpoint_descriptor          /* descriptor of notify ep */
169                                 *dev_notify_ep_desc;
170         struct usb_endpoint_descriptor          /* descriptor of in endpoint */
171                                 *dev_in_ep_desc;
172         struct usb_endpoint_descriptor          /* descriptor of out endpoint */
173                                 *dev_out_ep_desc;
174         struct usb_request      *dev_ctrl_req;  /* control request */
175         struct list_head        dev_req_list;   /* list of write requests */
176         int                     dev_sched_port; /* round robin port scheduled */
177         struct gs_port          *dev_port[GS_NUM_PORTS]; /* the ports */
178 };
179
180
181 /* Functions */
182
183 /* module */
184 static int __init gs_module_init(void);
185 static void __exit gs_module_exit(void);
186
187 /* tty driver */
188 static int gs_open(struct tty_struct *tty, struct file *file);
189 static void gs_close(struct tty_struct *tty, struct file *file);
190 static int gs_write(struct tty_struct *tty, 
191         const unsigned char *buf, int count);
192 static void gs_put_char(struct tty_struct *tty, unsigned char ch);
193 static void gs_flush_chars(struct tty_struct *tty);
194 static int gs_write_room(struct tty_struct *tty);
195 static int gs_chars_in_buffer(struct tty_struct *tty);
196 static void gs_throttle(struct tty_struct * tty);
197 static void gs_unthrottle(struct tty_struct * tty);
198 static void gs_break(struct tty_struct *tty, int break_state);
199 static int  gs_ioctl(struct tty_struct *tty, struct file *file,
200         unsigned int cmd, unsigned long arg);
201 static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
202
203 static int gs_send(struct gs_dev *dev);
204 static int gs_send_packet(struct gs_dev *dev, char *packet,
205         unsigned int size);
206 static int gs_recv_packet(struct gs_dev *dev, char *packet,
207         unsigned int size);
208 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
209 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
210
211 /* gadget driver */
212 static int gs_bind(struct usb_gadget *gadget);
213 static void gs_unbind(struct usb_gadget *gadget);
214 static int gs_setup(struct usb_gadget *gadget,
215         const struct usb_ctrlrequest *ctrl);
216 static int gs_setup_standard(struct usb_gadget *gadget,
217         const struct usb_ctrlrequest *ctrl);
218 static int gs_setup_class(struct usb_gadget *gadget,
219         const struct usb_ctrlrequest *ctrl);
220 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
221 static void gs_disconnect(struct usb_gadget *gadget);
222 static int gs_set_config(struct gs_dev *dev, unsigned config);
223 static void gs_reset_config(struct gs_dev *dev);
224 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
225                 u8 type, unsigned int index, int is_otg);
226
227 static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
228         gfp_t kmalloc_flags);
229 static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
230
231 static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
232         gfp_t kmalloc_flags);
233 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
234
235 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
236 static void gs_free_ports(struct gs_dev *dev);
237
238 /* circular buffer */
239 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
240 static void gs_buf_free(struct gs_buf *gb);
241 static void gs_buf_clear(struct gs_buf *gb);
242 static unsigned int gs_buf_data_avail(struct gs_buf *gb);
243 static unsigned int gs_buf_space_avail(struct gs_buf *gb);
244 static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
245         unsigned int count);
246 static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
247         unsigned int count);
248
249 /* external functions */
250 extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
251
252
253 /* Globals */
254
255 static struct gs_dev *gs_device;
256
257 static const char *EP_IN_NAME;
258 static const char *EP_OUT_NAME;
259 static const char *EP_NOTIFY_NAME;
260
261 static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
262
263 static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
264 static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
265
266 static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
267
268 static unsigned int use_acm = GS_DEFAULT_USE_ACM;
269
270
271 /* tty driver struct */
272 static const struct tty_operations gs_tty_ops = {
273         .open =                 gs_open,
274         .close =                gs_close,
275         .write =                gs_write,
276         .put_char =             gs_put_char,
277         .flush_chars =          gs_flush_chars,
278         .write_room =           gs_write_room,
279         .ioctl =                gs_ioctl,
280         .set_termios =          gs_set_termios,
281         .throttle =             gs_throttle,
282         .unthrottle =           gs_unthrottle,
283         .break_ctl =            gs_break,
284         .chars_in_buffer =      gs_chars_in_buffer,
285 };
286 static struct tty_driver *gs_tty_driver;
287
288 /* gadget driver struct */
289 static struct usb_gadget_driver gs_gadget_driver = {
290 #ifdef CONFIG_USB_GADGET_DUALSPEED
291         .speed =                USB_SPEED_HIGH,
292 #else
293         .speed =                USB_SPEED_FULL,
294 #endif /* CONFIG_USB_GADGET_DUALSPEED */
295         .function =             GS_LONG_NAME,
296         .bind =                 gs_bind,
297         .unbind =               gs_unbind,
298         .setup =                gs_setup,
299         .disconnect =           gs_disconnect,
300         .driver = {
301                 .name =         GS_SHORT_NAME,
302         },
303 };
304
305
306 /* USB descriptors */
307
308 #define GS_MANUFACTURER_STR_ID  1
309 #define GS_PRODUCT_STR_ID       2
310 #define GS_SERIAL_STR_ID        3
311 #define GS_BULK_CONFIG_STR_ID   4
312 #define GS_ACM_CONFIG_STR_ID    5
313 #define GS_CONTROL_STR_ID       6
314 #define GS_DATA_STR_ID          7
315
316 /* static strings, in UTF-8 */
317 static char manufacturer[50];
318 static struct usb_string gs_strings[] = {
319         { GS_MANUFACTURER_STR_ID, manufacturer },
320         { GS_PRODUCT_STR_ID, GS_LONG_NAME },
321         { GS_SERIAL_STR_ID, "0" },
322         { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
323         { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
324         { GS_CONTROL_STR_ID, "Gadget Serial Control" },
325         { GS_DATA_STR_ID, "Gadget Serial Data" },
326         {  } /* end of list */
327 };
328
329 static struct usb_gadget_strings gs_string_table = {
330         .language =             0x0409, /* en-us */
331         .strings =              gs_strings,
332 };
333
334 static struct usb_device_descriptor gs_device_desc = {
335         .bLength =              USB_DT_DEVICE_SIZE,
336         .bDescriptorType =      USB_DT_DEVICE,
337         .bcdUSB =               __constant_cpu_to_le16(0x0200),
338         .bDeviceSubClass =      0,
339         .bDeviceProtocol =      0,
340         .idVendor =             __constant_cpu_to_le16(GS_VENDOR_ID),
341         .idProduct =            __constant_cpu_to_le16(GS_PRODUCT_ID),
342         .iManufacturer =        GS_MANUFACTURER_STR_ID,
343         .iProduct =             GS_PRODUCT_STR_ID,
344         .iSerialNumber =        GS_SERIAL_STR_ID,
345         .bNumConfigurations =   GS_NUM_CONFIGS,
346 };
347
348 static struct usb_otg_descriptor gs_otg_descriptor = {
349         .bLength =              sizeof(gs_otg_descriptor),
350         .bDescriptorType =      USB_DT_OTG,
351         .bmAttributes =         USB_OTG_SRP,
352 };
353
354 static struct usb_config_descriptor gs_bulk_config_desc = {
355         .bLength =              USB_DT_CONFIG_SIZE,
356         .bDescriptorType =      USB_DT_CONFIG,
357         /* .wTotalLength computed dynamically */
358         .bNumInterfaces =       1,
359         .bConfigurationValue =  GS_BULK_CONFIG_ID,
360         .iConfiguration =       GS_BULK_CONFIG_STR_ID,
361         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
362         .bMaxPower =            1,
363 };
364
365 static struct usb_config_descriptor gs_acm_config_desc = {
366         .bLength =              USB_DT_CONFIG_SIZE,
367         .bDescriptorType =      USB_DT_CONFIG,
368         /* .wTotalLength computed dynamically */
369         .bNumInterfaces =       2,
370         .bConfigurationValue =  GS_ACM_CONFIG_ID,
371         .iConfiguration =       GS_ACM_CONFIG_STR_ID,
372         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
373         .bMaxPower =            1,
374 };
375
376 static const struct usb_interface_descriptor gs_bulk_interface_desc = {
377         .bLength =              USB_DT_INTERFACE_SIZE,
378         .bDescriptorType =      USB_DT_INTERFACE,
379         .bInterfaceNumber =     GS_BULK_INTERFACE_ID,
380         .bNumEndpoints =        2,
381         .bInterfaceClass =      USB_CLASS_CDC_DATA,
382         .bInterfaceSubClass =   0,
383         .bInterfaceProtocol =   0,
384         .iInterface =           GS_DATA_STR_ID,
385 };
386
387 static const struct usb_interface_descriptor gs_control_interface_desc = {
388         .bLength =              USB_DT_INTERFACE_SIZE,
389         .bDescriptorType =      USB_DT_INTERFACE,
390         .bInterfaceNumber =     GS_CONTROL_INTERFACE_ID,
391         .bNumEndpoints =        1,
392         .bInterfaceClass =      USB_CLASS_COMM,
393         .bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
394         .bInterfaceProtocol =   USB_CDC_ACM_PROTO_AT_V25TER,
395         .iInterface =           GS_CONTROL_STR_ID,
396 };
397
398 static const struct usb_interface_descriptor gs_data_interface_desc = {
399         .bLength =              USB_DT_INTERFACE_SIZE,
400         .bDescriptorType =      USB_DT_INTERFACE,
401         .bInterfaceNumber =     GS_DATA_INTERFACE_ID,
402         .bNumEndpoints =        2,
403         .bInterfaceClass =      USB_CLASS_CDC_DATA,
404         .bInterfaceSubClass =   0,
405         .bInterfaceProtocol =   0,
406         .iInterface =           GS_DATA_STR_ID,
407 };
408
409 static const struct usb_cdc_header_desc gs_header_desc = {
410         .bLength =              sizeof(gs_header_desc),
411         .bDescriptorType =      USB_DT_CS_INTERFACE,
412         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
413         .bcdCDC =               __constant_cpu_to_le16(0x0110),
414 };
415
416 static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
417         .bLength =              sizeof(gs_call_mgmt_descriptor),
418         .bDescriptorType =      USB_DT_CS_INTERFACE,
419         .bDescriptorSubType =   USB_CDC_CALL_MANAGEMENT_TYPE,
420         .bmCapabilities =       0,
421         .bDataInterface =       1,      /* index of data interface */
422 };
423
424 static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
425         .bLength =              sizeof(gs_acm_descriptor),
426         .bDescriptorType =      USB_DT_CS_INTERFACE,
427         .bDescriptorSubType =   USB_CDC_ACM_TYPE,
428         .bmCapabilities =       0,
429 };
430
431 static const struct usb_cdc_union_desc gs_union_desc = {
432         .bLength =              sizeof(gs_union_desc),
433         .bDescriptorType =      USB_DT_CS_INTERFACE,
434         .bDescriptorSubType =   USB_CDC_UNION_TYPE,
435         .bMasterInterface0 =    0,      /* index of control interface */
436         .bSlaveInterface0 =     1,      /* index of data interface */
437 };
438  
439 static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
440         .bLength =              USB_DT_ENDPOINT_SIZE,
441         .bDescriptorType =      USB_DT_ENDPOINT,
442         .bEndpointAddress =     USB_DIR_IN,
443         .bmAttributes =         USB_ENDPOINT_XFER_INT,
444         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
445         .bInterval =            1 << GS_LOG2_NOTIFY_INTERVAL,
446 };
447
448 static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
449         .bLength =              USB_DT_ENDPOINT_SIZE,
450         .bDescriptorType =      USB_DT_ENDPOINT,
451         .bEndpointAddress =     USB_DIR_IN,
452         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
453 };
454
455 static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
456         .bLength =              USB_DT_ENDPOINT_SIZE,
457         .bDescriptorType =      USB_DT_ENDPOINT,
458         .bEndpointAddress =     USB_DIR_OUT,
459         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
460 };
461
462 static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
463         (struct usb_descriptor_header *) &gs_otg_descriptor,
464         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
465         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
466         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
467         NULL,
468 };
469
470 static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
471         (struct usb_descriptor_header *) &gs_otg_descriptor,
472         (struct usb_descriptor_header *) &gs_control_interface_desc,
473         (struct usb_descriptor_header *) &gs_header_desc,
474         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
475         (struct usb_descriptor_header *) &gs_acm_descriptor,
476         (struct usb_descriptor_header *) &gs_union_desc,
477         (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
478         (struct usb_descriptor_header *) &gs_data_interface_desc,
479         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
480         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
481         NULL,
482 };
483
484 #ifdef CONFIG_USB_GADGET_DUALSPEED
485 static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
486         .bLength =              USB_DT_ENDPOINT_SIZE,
487         .bDescriptorType =      USB_DT_ENDPOINT,
488         .bEndpointAddress =     USB_DIR_IN,
489         .bmAttributes =         USB_ENDPOINT_XFER_INT,
490         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
491         .bInterval =            GS_LOG2_NOTIFY_INTERVAL+4,
492 };
493
494 static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
495         .bLength =              USB_DT_ENDPOINT_SIZE,
496         .bDescriptorType =      USB_DT_ENDPOINT,
497         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
498         .wMaxPacketSize =       __constant_cpu_to_le16(512),
499 };
500
501 static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
502         .bLength =              USB_DT_ENDPOINT_SIZE,
503         .bDescriptorType =      USB_DT_ENDPOINT,
504         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
505         .wMaxPacketSize =       __constant_cpu_to_le16(512),
506 };
507
508 static struct usb_qualifier_descriptor gs_qualifier_desc = {
509         .bLength =              sizeof(struct usb_qualifier_descriptor),
510         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
511         .bcdUSB =               __constant_cpu_to_le16 (0x0200),
512         /* assumes ep0 uses the same value for both speeds ... */
513         .bNumConfigurations =   GS_NUM_CONFIGS,
514 };
515
516 static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
517         (struct usb_descriptor_header *) &gs_otg_descriptor,
518         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
519         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
520         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
521         NULL,
522 };
523
524 static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
525         (struct usb_descriptor_header *) &gs_otg_descriptor,
526         (struct usb_descriptor_header *) &gs_control_interface_desc,
527         (struct usb_descriptor_header *) &gs_header_desc,
528         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
529         (struct usb_descriptor_header *) &gs_acm_descriptor,
530         (struct usb_descriptor_header *) &gs_union_desc,
531         (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
532         (struct usb_descriptor_header *) &gs_data_interface_desc,
533         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
534         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
535         NULL,
536 };
537
538 #endif /* CONFIG_USB_GADGET_DUALSPEED */
539
540
541 /* Module */
542 MODULE_DESCRIPTION(GS_LONG_NAME);
543 MODULE_AUTHOR("Al Borchers");
544 MODULE_LICENSE("GPL");
545
546 #ifdef GS_DEBUG
547 module_param(debug, int, S_IRUGO|S_IWUSR);
548 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
549 #endif
550
551 module_param(read_q_size, uint, S_IRUGO);
552 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
553
554 module_param(write_q_size, uint, S_IRUGO);
555 MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
556
557 module_param(write_buf_size, uint, S_IRUGO);
558 MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
559
560 module_param(use_acm, uint, S_IRUGO);
561 MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
562
563 module_init(gs_module_init);
564 module_exit(gs_module_exit);
565
566 /*
567 *  gs_module_init
568 *
569 *  Register as a USB gadget driver and a tty driver.
570 */
571 static int __init gs_module_init(void)
572 {
573         int i;
574         int retval;
575
576         retval = usb_gadget_register_driver(&gs_gadget_driver);
577         if (retval) {
578                 printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
579                 return retval;
580         }
581
582         gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
583         if (!gs_tty_driver)
584                 return -ENOMEM;
585         gs_tty_driver->owner = THIS_MODULE;
586         gs_tty_driver->driver_name = GS_SHORT_NAME;
587         gs_tty_driver->name = "ttygs";
588         gs_tty_driver->major = GS_MAJOR;
589         gs_tty_driver->minor_start = GS_MINOR_START;
590         gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
591         gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
592         gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
593         gs_tty_driver->init_termios = tty_std_termios;
594         gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
595         tty_set_operations(gs_tty_driver, &gs_tty_ops);
596
597         for (i=0; i < GS_NUM_PORTS; i++)
598                 sema_init(&gs_open_close_sem[i], 1);
599
600         retval = tty_register_driver(gs_tty_driver);
601         if (retval) {
602                 usb_gadget_unregister_driver(&gs_gadget_driver);
603                 put_tty_driver(gs_tty_driver);
604                 printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
605                 return retval;
606         }
607
608         printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
609         return 0;
610 }
611
612 /*
613 * gs_module_exit
614 *
615 * Unregister as a tty driver and a USB gadget driver.
616 */
617 static void __exit gs_module_exit(void)
618 {
619         tty_unregister_driver(gs_tty_driver);
620         put_tty_driver(gs_tty_driver);
621         usb_gadget_unregister_driver(&gs_gadget_driver);
622
623         printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
624 }
625
626 /* TTY Driver */
627
628 /*
629  * gs_open
630  */
631 static int gs_open(struct tty_struct *tty, struct file *file)
632 {
633         int port_num;
634         unsigned long flags;
635         struct gs_port *port;
636         struct gs_dev *dev;
637         struct gs_buf *buf;
638         struct semaphore *sem;
639         int ret;
640
641         port_num = tty->index;
642
643         gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
644
645         if (port_num < 0 || port_num >= GS_NUM_PORTS) {
646                 printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
647                         port_num, tty, file);
648                 return -ENODEV;
649         }
650
651         dev = gs_device;
652
653         if (dev == NULL) {
654                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
655                         port_num, tty, file);
656                 return -ENODEV;
657         }
658
659         sem = &gs_open_close_sem[port_num];
660         if (down_interruptible(sem)) {
661                 printk(KERN_ERR
662                 "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
663                         port_num, tty, file);
664                 return -ERESTARTSYS;
665         }
666
667         spin_lock_irqsave(&dev->dev_lock, flags);
668
669         if (dev->dev_config == GS_NO_CONFIG_ID) {
670                 printk(KERN_ERR
671                         "gs_open: (%d,%p,%p) device is not connected\n",
672                         port_num, tty, file);
673                 ret = -ENODEV;
674                 goto exit_unlock_dev;
675         }
676
677         port = dev->dev_port[port_num];
678
679         if (port == NULL) {
680                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
681                         port_num, tty, file);
682                 ret = -ENODEV;
683                 goto exit_unlock_dev;
684         }
685
686         spin_lock(&port->port_lock);
687         spin_unlock(&dev->dev_lock);
688
689         if (port->port_dev == NULL) {
690                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
691                         port_num, tty, file);
692                 ret = -EIO;
693                 goto exit_unlock_port;
694         }
695
696         if (port->port_open_count > 0) {
697                 ++port->port_open_count;
698                 gs_debug("gs_open: (%d,%p,%p) already open\n",
699                         port_num, tty, file);
700                 ret = 0;
701                 goto exit_unlock_port;
702         }
703
704         tty->driver_data = NULL;
705
706         /* mark port as in use, we can drop port lock and sleep if necessary */
707         port->port_in_use = 1;
708
709         /* allocate write buffer on first open */
710         if (port->port_write_buf == NULL) {
711                 spin_unlock_irqrestore(&port->port_lock, flags);
712                 buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
713                 spin_lock_irqsave(&port->port_lock, flags);
714
715                 /* might have been disconnected while asleep, check */
716                 if (port->port_dev == NULL) {
717                         printk(KERN_ERR
718                                 "gs_open: (%d,%p,%p) port disconnected (2)\n",
719                                 port_num, tty, file);
720                         port->port_in_use = 0;
721                         ret = -EIO;
722                         goto exit_unlock_port;
723                 }
724
725                 if ((port->port_write_buf=buf) == NULL) {
726                         printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
727                                 port_num, tty, file);
728                         port->port_in_use = 0;
729                         ret = -ENOMEM;
730                         goto exit_unlock_port;
731                 }
732
733         }
734
735         /* wait for carrier detect (not implemented) */
736
737         /* might have been disconnected while asleep, check */
738         if (port->port_dev == NULL) {
739                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
740                         port_num, tty, file);
741                 port->port_in_use = 0;
742                 ret = -EIO;
743                 goto exit_unlock_port;
744         }
745
746         tty->driver_data = port;
747         port->port_tty = tty;
748         port->port_open_count = 1;
749         port->port_in_use = 0;
750
751         gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
752
753         ret = 0;
754
755 exit_unlock_port:
756         spin_unlock_irqrestore(&port->port_lock, flags);
757         up(sem);
758         return ret;
759
760 exit_unlock_dev:
761         spin_unlock_irqrestore(&dev->dev_lock, flags);
762         up(sem);
763         return ret;
764
765 }
766
767 /*
768  * gs_close
769  */
770
771 #define GS_WRITE_FINISHED_EVENT_SAFELY(p)                       \
772 ({                                                              \
773         int cond;                                               \
774                                                                 \
775         spin_lock_irq(&(p)->port_lock);                         \
776         cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \
777         spin_unlock_irq(&(p)->port_lock);                       \
778         cond;                                                   \
779 })
780
781 static void gs_close(struct tty_struct *tty, struct file *file)
782 {
783         struct gs_port *port = tty->driver_data;
784         struct semaphore *sem;
785
786         if (port == NULL) {
787                 printk(KERN_ERR "gs_close: NULL port pointer\n");
788                 return;
789         }
790
791         gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
792
793         sem = &gs_open_close_sem[port->port_num];
794         down(sem);
795
796         spin_lock_irq(&port->port_lock);
797
798         if (port->port_open_count == 0) {
799                 printk(KERN_ERR
800                         "gs_close: (%d,%p,%p) port is already closed\n",
801                         port->port_num, tty, file);
802                 goto exit;
803         }
804
805         if (port->port_open_count > 1) {
806                 --port->port_open_count;
807                 goto exit;
808         }
809
810         /* free disconnected port on final close */
811         if (port->port_dev == NULL) {
812                 kfree(port);
813                 goto exit;
814         }
815
816         /* mark port as closed but in use, we can drop port lock */
817         /* and sleep if necessary */
818         port->port_in_use = 1;
819         port->port_open_count = 0;
820
821         /* wait for write buffer to drain, or */
822         /* at most GS_CLOSE_TIMEOUT seconds */
823         if (gs_buf_data_avail(port->port_write_buf) > 0) {
824                 spin_unlock_irq(&port->port_lock);
825                 wait_event_interruptible_timeout(port->port_write_wait,
826                                         GS_WRITE_FINISHED_EVENT_SAFELY(port),
827                                         GS_CLOSE_TIMEOUT * HZ);
828                 spin_lock_irq(&port->port_lock);
829         }
830
831         /* free disconnected port on final close */
832         /* (might have happened during the above sleep) */
833         if (port->port_dev == NULL) {
834                 kfree(port);
835                 goto exit;
836         }
837
838         gs_buf_clear(port->port_write_buf);
839
840         tty->driver_data = NULL;
841         port->port_tty = NULL;
842         port->port_in_use = 0;
843
844         gs_debug("gs_close: (%d,%p,%p) completed\n",
845                 port->port_num, tty, file);
846
847 exit:
848         spin_unlock_irq(&port->port_lock);
849         up(sem);
850 }
851
852 /*
853  * gs_write
854  */
855 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
856 {
857         unsigned long flags;
858         struct gs_port *port = tty->driver_data;
859         int ret;
860
861         if (port == NULL) {
862                 printk(KERN_ERR "gs_write: NULL port pointer\n");
863                 return -EIO;
864         }
865
866         gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
867                 count);
868
869         if (count == 0)
870                 return 0;
871
872         spin_lock_irqsave(&port->port_lock, flags);
873
874         if (port->port_dev == NULL) {
875                 printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
876                         port->port_num, tty);
877                 ret = -EIO;
878                 goto exit;
879         }
880
881         if (port->port_open_count == 0) {
882                 printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
883                         port->port_num, tty);
884                 ret = -EBADF;
885                 goto exit;
886         }
887
888         count = gs_buf_put(port->port_write_buf, buf, count);
889
890         spin_unlock_irqrestore(&port->port_lock, flags);
891
892         gs_send(gs_device);
893
894         gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
895                 count);
896
897         return count;
898
899 exit:
900         spin_unlock_irqrestore(&port->port_lock, flags);
901         return ret;
902 }
903
904 /*
905  * gs_put_char
906  */
907 static void gs_put_char(struct tty_struct *tty, unsigned char ch)
908 {
909         unsigned long flags;
910         struct gs_port *port = tty->driver_data;
911
912         if (port == NULL) {
913                 printk(KERN_ERR "gs_put_char: NULL port pointer\n");
914                 return;
915         }
916
917         gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
918
919         spin_lock_irqsave(&port->port_lock, flags);
920
921         if (port->port_dev == NULL) {
922                 printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
923                         port->port_num, tty);
924                 goto exit;
925         }
926
927         if (port->port_open_count == 0) {
928                 printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
929                         port->port_num, tty);
930                 goto exit;
931         }
932
933         gs_buf_put(port->port_write_buf, &ch, 1);
934
935 exit:
936         spin_unlock_irqrestore(&port->port_lock, flags);
937 }
938
939 /*
940  * gs_flush_chars
941  */
942 static void gs_flush_chars(struct tty_struct *tty)
943 {
944         unsigned long flags;
945         struct gs_port *port = tty->driver_data;
946
947         if (port == NULL) {
948                 printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
949                 return;
950         }
951
952         gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
953
954         spin_lock_irqsave(&port->port_lock, flags);
955
956         if (port->port_dev == NULL) {
957                 printk(KERN_ERR
958                         "gs_flush_chars: (%d,%p) port is not connected\n",
959                         port->port_num, tty);
960                 goto exit;
961         }
962
963         if (port->port_open_count == 0) {
964                 printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
965                         port->port_num, tty);
966                 goto exit;
967         }
968
969         spin_unlock_irqrestore(&port->port_lock, flags);
970
971         gs_send(gs_device);
972
973         return;
974
975 exit:
976         spin_unlock_irqrestore(&port->port_lock, flags);
977 }
978
979 /*
980  * gs_write_room
981  */
982 static int gs_write_room(struct tty_struct *tty)
983 {
984
985         int room = 0;
986         unsigned long flags;
987         struct gs_port *port = tty->driver_data;
988
989
990         if (port == NULL)
991                 return 0;
992
993         spin_lock_irqsave(&port->port_lock, flags);
994
995         if (port->port_dev != NULL && port->port_open_count > 0
996         && port->port_write_buf != NULL)
997                 room = gs_buf_space_avail(port->port_write_buf);
998
999         spin_unlock_irqrestore(&port->port_lock, flags);
1000
1001         gs_debug("gs_write_room: (%d,%p) room=%d\n",
1002                 port->port_num, tty, room);
1003
1004         return room;
1005 }
1006
1007 /*
1008  * gs_chars_in_buffer
1009  */
1010 static int gs_chars_in_buffer(struct tty_struct *tty)
1011 {
1012         int chars = 0;
1013         unsigned long flags;
1014         struct gs_port *port = tty->driver_data;
1015
1016         if (port == NULL)
1017                 return 0;
1018
1019         spin_lock_irqsave(&port->port_lock, flags);
1020
1021         if (port->port_dev != NULL && port->port_open_count > 0
1022         && port->port_write_buf != NULL)
1023                 chars = gs_buf_data_avail(port->port_write_buf);
1024
1025         spin_unlock_irqrestore(&port->port_lock, flags);
1026
1027         gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
1028                 port->port_num, tty, chars);
1029
1030         return chars;
1031 }
1032
1033 /*
1034  * gs_throttle
1035  */
1036 static void gs_throttle(struct tty_struct *tty)
1037 {
1038 }
1039
1040 /*
1041  * gs_unthrottle
1042  */
1043 static void gs_unthrottle(struct tty_struct *tty)
1044 {
1045 }
1046
1047 /*
1048  * gs_break
1049  */
1050 static void gs_break(struct tty_struct *tty, int break_state)
1051 {
1052 }
1053
1054 /*
1055  * gs_ioctl
1056  */
1057 static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1058 {
1059         struct gs_port *port = tty->driver_data;
1060
1061         if (port == NULL) {
1062                 printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
1063                 return -EIO;
1064         }
1065
1066         gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
1067                 port->port_num, tty, file, cmd, arg);
1068
1069         /* handle ioctls */
1070
1071         /* could not handle ioctl */
1072         return -ENOIOCTLCMD;
1073 }
1074
1075 /*
1076  * gs_set_termios
1077  */
1078 static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
1079 {
1080 }
1081
1082 /*
1083 * gs_send
1084 *
1085 * This function finds available write requests, calls
1086 * gs_send_packet to fill these packets with data, and
1087 * continues until either there are no more write requests
1088 * available or no more data to send.  This function is
1089 * run whenever data arrives or write requests are available.
1090 */
1091 static int gs_send(struct gs_dev *dev)
1092 {
1093         int ret,len;
1094         unsigned long flags;
1095         struct usb_ep *ep;
1096         struct usb_request *req;
1097         struct gs_req_entry *req_entry;
1098
1099         if (dev == NULL) {
1100                 printk(KERN_ERR "gs_send: NULL device pointer\n");
1101                 return -ENODEV;
1102         }
1103
1104         spin_lock_irqsave(&dev->dev_lock, flags);
1105
1106         ep = dev->dev_in_ep;
1107
1108         while(!list_empty(&dev->dev_req_list)) {
1109
1110                 req_entry = list_entry(dev->dev_req_list.next,
1111                         struct gs_req_entry, re_entry);
1112
1113                 req = req_entry->re_req;
1114
1115                 len = gs_send_packet(dev, req->buf, ep->maxpacket);
1116
1117                 if (len > 0) {
1118 gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
1119                         list_del(&req_entry->re_entry);
1120                         req->length = len;
1121                         spin_unlock_irqrestore(&dev->dev_lock, flags);
1122                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1123                                 printk(KERN_ERR
1124                                 "gs_send: cannot queue read request, ret=%d\n",
1125                                         ret);
1126                                 spin_lock_irqsave(&dev->dev_lock, flags);
1127                                 break;
1128                         }
1129                         spin_lock_irqsave(&dev->dev_lock, flags);
1130                 } else {
1131                         break;
1132                 }
1133
1134         }
1135
1136         spin_unlock_irqrestore(&dev->dev_lock, flags);
1137
1138         return 0;
1139 }
1140
1141 /*
1142  * gs_send_packet
1143  *
1144  * If there is data to send, a packet is built in the given
1145  * buffer and the size is returned.  If there is no data to
1146  * send, 0 is returned.  If there is any error a negative
1147  * error number is returned.
1148  *
1149  * Called during USB completion routine, on interrupt time.
1150  *
1151  * We assume that disconnect will not happen until all completion
1152  * routines have completed, so we can assume that the dev_port
1153  * array does not change during the lifetime of this function.
1154  */
1155 static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
1156 {
1157         unsigned int len;
1158         struct gs_port *port;
1159
1160         /* TEMPORARY -- only port 0 is supported right now */
1161         port = dev->dev_port[0];
1162
1163         if (port == NULL) {
1164                 printk(KERN_ERR
1165                         "gs_send_packet: port=%d, NULL port pointer\n",
1166                         0);
1167                 return -EIO;
1168         }
1169
1170         spin_lock(&port->port_lock);
1171
1172         len = gs_buf_data_avail(port->port_write_buf);
1173         if (len < size)
1174                 size = len;
1175
1176         if (size == 0)
1177                 goto exit;
1178
1179         size = gs_buf_get(port->port_write_buf, packet, size);
1180
1181         if (port->port_tty)
1182                 wake_up_interruptible(&port->port_tty->write_wait);
1183
1184 exit:
1185         spin_unlock(&port->port_lock);
1186         return size;
1187 }
1188
1189 /*
1190  * gs_recv_packet
1191  *
1192  * Called for each USB packet received.  Reads the packet
1193  * header and stuffs the data in the appropriate tty buffer.
1194  * Returns 0 if successful, or a negative error number.
1195  *
1196  * Called during USB completion routine, on interrupt time.
1197  *
1198  * We assume that disconnect will not happen until all completion
1199  * routines have completed, so we can assume that the dev_port
1200  * array does not change during the lifetime of this function.
1201  */
1202 static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
1203 {
1204         unsigned int len;
1205         struct gs_port *port;
1206         int ret;
1207         struct tty_struct *tty;
1208
1209         /* TEMPORARY -- only port 0 is supported right now */
1210         port = dev->dev_port[0];
1211
1212         if (port == NULL) {
1213                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
1214                         port->port_num);
1215                 return -EIO;
1216         }
1217
1218         spin_lock(&port->port_lock);
1219
1220         if (port->port_open_count == 0) {
1221                 printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
1222                         port->port_num);
1223                 ret = -EIO;
1224                 goto exit;
1225         }
1226
1227
1228         tty = port->port_tty;
1229
1230         if (tty == NULL) {
1231                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
1232                         port->port_num);
1233                 ret = -EIO;
1234                 goto exit;
1235         }
1236
1237         if (port->port_tty->magic != TTY_MAGIC) {
1238                 printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
1239                         port->port_num);
1240                 ret = -EIO;
1241                 goto exit;
1242         }
1243
1244         len = tty_buffer_request_room(tty, size);
1245         if (len > 0) {
1246                 tty_insert_flip_string(tty, packet, len);
1247                 tty_flip_buffer_push(port->port_tty);
1248                 wake_up_interruptible(&port->port_tty->read_wait);
1249         }
1250         ret = 0;
1251 exit:
1252         spin_unlock(&port->port_lock);
1253         return ret;
1254 }
1255
1256 /*
1257 * gs_read_complete
1258 */
1259 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
1260 {
1261         int ret;
1262         struct gs_dev *dev = ep->driver_data;
1263
1264         if (dev == NULL) {
1265                 printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
1266                 return;
1267         }
1268
1269         switch(req->status) {
1270         case 0:
1271                 /* normal completion */
1272                 gs_recv_packet(dev, req->buf, req->actual);
1273 requeue:
1274                 req->length = ep->maxpacket;
1275                 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1276                         printk(KERN_ERR
1277                         "gs_read_complete: cannot queue read request, ret=%d\n",
1278                                 ret);
1279                 }
1280                 break;
1281
1282         case -ESHUTDOWN:
1283                 /* disconnect */
1284                 gs_debug("gs_read_complete: shutdown\n");
1285                 gs_free_req(ep, req);
1286                 break;
1287
1288         default:
1289                 /* unexpected */
1290                 printk(KERN_ERR
1291                 "gs_read_complete: unexpected status error, status=%d\n",
1292                         req->status);
1293                 goto requeue;
1294                 break;
1295         }
1296 }
1297
1298 /*
1299 * gs_write_complete
1300 */
1301 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
1302 {
1303         struct gs_dev *dev = ep->driver_data;
1304         struct gs_req_entry *gs_req = req->context;
1305
1306         if (dev == NULL) {
1307                 printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
1308                 return;
1309         }
1310
1311         switch(req->status) {
1312         case 0:
1313                 /* normal completion */
1314 requeue:
1315                 if (gs_req == NULL) {
1316                         printk(KERN_ERR
1317                                 "gs_write_complete: NULL request pointer\n");
1318                         return;
1319                 }
1320
1321                 spin_lock(&dev->dev_lock);
1322                 list_add(&gs_req->re_entry, &dev->dev_req_list);
1323                 spin_unlock(&dev->dev_lock);
1324
1325                 gs_send(dev);
1326
1327                 break;
1328
1329         case -ESHUTDOWN:
1330                 /* disconnect */
1331                 gs_debug("gs_write_complete: shutdown\n");
1332                 gs_free_req(ep, req);
1333                 break;
1334
1335         default:
1336                 printk(KERN_ERR
1337                 "gs_write_complete: unexpected status error, status=%d\n",
1338                         req->status);
1339                 goto requeue;
1340                 break;
1341         }
1342 }
1343
1344 /* Gadget Driver */
1345
1346 /*
1347  * gs_bind
1348  *
1349  * Called on module load.  Allocates and initializes the device
1350  * structure and a control request.
1351  */
1352 static int __init gs_bind(struct usb_gadget *gadget)
1353 {
1354         int ret;
1355         struct usb_ep *ep;
1356         struct gs_dev *dev;
1357         int gcnum;
1358
1359         /* Some controllers can't support CDC ACM:
1360          * - sh doesn't support multiple interfaces or configs;
1361          * - sa1100 doesn't have a third interrupt endpoint
1362          */
1363         if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
1364                 use_acm = 0;
1365
1366         gcnum = usb_gadget_controller_number(gadget);
1367         if (gcnum >= 0)
1368                 gs_device_desc.bcdDevice =
1369                                 cpu_to_le16(GS_VERSION_NUM | gcnum);
1370         else {
1371                 printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
1372                         gadget->name);
1373                 /* unrecognized, but safe unless bulk is REALLY quirky */
1374                 gs_device_desc.bcdDevice =
1375                         __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
1376         }
1377
1378         usb_ep_autoconfig_reset(gadget);
1379
1380         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
1381         if (!ep)
1382                 goto autoconf_fail;
1383         EP_IN_NAME = ep->name;
1384         ep->driver_data = ep;   /* claim the endpoint */
1385
1386         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
1387         if (!ep)
1388                 goto autoconf_fail;
1389         EP_OUT_NAME = ep->name;
1390         ep->driver_data = ep;   /* claim the endpoint */
1391
1392         if (use_acm) {
1393                 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
1394                 if (!ep) {
1395                         printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
1396                         goto autoconf_fail;
1397                 }
1398                 gs_device_desc.idProduct = __constant_cpu_to_le16(
1399                                                 GS_CDC_PRODUCT_ID),
1400                 EP_NOTIFY_NAME = ep->name;
1401                 ep->driver_data = ep;   /* claim the endpoint */
1402         }
1403
1404         gs_device_desc.bDeviceClass = use_acm
1405                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1406         gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1407
1408 #ifdef CONFIG_USB_GADGET_DUALSPEED
1409         gs_qualifier_desc.bDeviceClass = use_acm
1410                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1411         /* assume ep0 uses the same packet size for both speeds */
1412         gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
1413         /* assume endpoints are dual-speed */
1414         gs_highspeed_notify_desc.bEndpointAddress =
1415                 gs_fullspeed_notify_desc.bEndpointAddress;
1416         gs_highspeed_in_desc.bEndpointAddress =
1417                 gs_fullspeed_in_desc.bEndpointAddress;
1418         gs_highspeed_out_desc.bEndpointAddress =
1419                 gs_fullspeed_out_desc.bEndpointAddress;
1420 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1421
1422         usb_gadget_set_selfpowered(gadget);
1423
1424         if (gadget->is_otg) {
1425                 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
1426                 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1427                 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1428         }
1429
1430         gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
1431         if (dev == NULL)
1432                 return -ENOMEM;
1433
1434         snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1435                 init_utsname()->sysname, init_utsname()->release,
1436                 gadget->name);
1437
1438         memset(dev, 0, sizeof(struct gs_dev));
1439         dev->dev_gadget = gadget;
1440         spin_lock_init(&dev->dev_lock);
1441         INIT_LIST_HEAD(&dev->dev_req_list);
1442         set_gadget_data(gadget, dev);
1443
1444         if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
1445                 printk(KERN_ERR "gs_bind: cannot allocate ports\n");
1446                 gs_unbind(gadget);
1447                 return ret;
1448         }
1449
1450         /* preallocate control response and buffer */
1451         dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
1452                 GFP_KERNEL);
1453         if (dev->dev_ctrl_req == NULL) {
1454                 gs_unbind(gadget);
1455                 return -ENOMEM;
1456         }
1457         dev->dev_ctrl_req->complete = gs_setup_complete;
1458
1459         gadget->ep0->driver_data = dev;
1460
1461         printk(KERN_INFO "gs_bind: %s %s bound\n",
1462                 GS_LONG_NAME, GS_VERSION_STR);
1463
1464         return 0;
1465
1466 autoconf_fail:
1467         printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
1468         return -ENODEV;
1469 }
1470
1471 /*
1472  * gs_unbind
1473  *
1474  * Called on module unload.  Frees the control request and device
1475  * structure.
1476  */
1477 static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
1478 {
1479         struct gs_dev *dev = get_gadget_data(gadget);
1480
1481         gs_device = NULL;
1482
1483         /* read/write requests already freed, only control request remains */
1484         if (dev != NULL) {
1485                 if (dev->dev_ctrl_req != NULL) {
1486                         gs_free_req(gadget->ep0, dev->dev_ctrl_req);
1487                         dev->dev_ctrl_req = NULL;
1488                 }
1489                 gs_free_ports(dev);
1490                 kfree(dev);
1491                 set_gadget_data(gadget, NULL);
1492         }
1493
1494         printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
1495                 GS_VERSION_STR);
1496 }
1497
1498 /*
1499  * gs_setup
1500  *
1501  * Implements all the control endpoint functionality that's not
1502  * handled in hardware or the hardware driver.
1503  *
1504  * Returns the size of the data sent to the host, or a negative
1505  * error number.
1506  */
1507 static int gs_setup(struct usb_gadget *gadget,
1508         const struct usb_ctrlrequest *ctrl)
1509 {
1510         int ret = -EOPNOTSUPP;
1511         struct gs_dev *dev = get_gadget_data(gadget);
1512         struct usb_request *req = dev->dev_ctrl_req;
1513         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1514         u16 wValue = le16_to_cpu(ctrl->wValue);
1515         u16 wLength = le16_to_cpu(ctrl->wLength);
1516
1517         switch (ctrl->bRequestType & USB_TYPE_MASK) {
1518         case USB_TYPE_STANDARD:
1519                 ret = gs_setup_standard(gadget,ctrl);
1520                 break;
1521
1522         case USB_TYPE_CLASS:
1523                 ret = gs_setup_class(gadget,ctrl);
1524                 break;
1525
1526         default:
1527                 printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1528                         ctrl->bRequestType, ctrl->bRequest,
1529                         wValue, wIndex, wLength);
1530                 break;
1531         }
1532
1533         /* respond with data transfer before status phase? */
1534         if (ret >= 0) {
1535                 req->length = ret;
1536                 req->zero = ret < wLength
1537                                 && (ret % gadget->ep0->maxpacket) == 0;
1538                 ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1539                 if (ret < 0) {
1540                         printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
1541                                 ret);
1542                         req->status = 0;
1543                         gs_setup_complete(gadget->ep0, req);
1544                 }
1545         }
1546
1547         /* device either stalls (ret < 0) or reports success */
1548         return ret;
1549 }
1550
1551 static int gs_setup_standard(struct usb_gadget *gadget,
1552         const struct usb_ctrlrequest *ctrl)
1553 {
1554         int ret = -EOPNOTSUPP;
1555         struct gs_dev *dev = get_gadget_data(gadget);
1556         struct usb_request *req = dev->dev_ctrl_req;
1557         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1558         u16 wValue = le16_to_cpu(ctrl->wValue);
1559         u16 wLength = le16_to_cpu(ctrl->wLength);
1560
1561         switch (ctrl->bRequest) {
1562         case USB_REQ_GET_DESCRIPTOR:
1563                 if (ctrl->bRequestType != USB_DIR_IN)
1564                         break;
1565
1566                 switch (wValue >> 8) {
1567                 case USB_DT_DEVICE:
1568                         ret = min(wLength,
1569                                 (u16)sizeof(struct usb_device_descriptor));
1570                         memcpy(req->buf, &gs_device_desc, ret);
1571                         break;
1572
1573 #ifdef CONFIG_USB_GADGET_DUALSPEED
1574                 case USB_DT_DEVICE_QUALIFIER:
1575                         if (!gadget->is_dualspeed)
1576                                 break;
1577                         ret = min(wLength,
1578                                 (u16)sizeof(struct usb_qualifier_descriptor));
1579                         memcpy(req->buf, &gs_qualifier_desc, ret);
1580                         break;
1581
1582                 case USB_DT_OTHER_SPEED_CONFIG:
1583                         if (!gadget->is_dualspeed)
1584                                 break;
1585                         /* fall through */
1586 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1587                 case USB_DT_CONFIG:
1588                         ret = gs_build_config_buf(req->buf, gadget->speed,
1589                                 wValue >> 8, wValue & 0xff,
1590                                 gadget->is_otg);
1591                         if (ret >= 0)
1592                                 ret = min(wLength, (u16)ret);
1593                         break;
1594
1595                 case USB_DT_STRING:
1596                         /* wIndex == language code. */
1597                         ret = usb_gadget_get_string(&gs_string_table,
1598                                 wValue & 0xff, req->buf);
1599                         if (ret >= 0)
1600                                 ret = min(wLength, (u16)ret);
1601                         break;
1602                 }
1603                 break;
1604
1605         case USB_REQ_SET_CONFIGURATION:
1606                 if (ctrl->bRequestType != 0)
1607                         break;
1608                 spin_lock(&dev->dev_lock);
1609                 ret = gs_set_config(dev, wValue);
1610                 spin_unlock(&dev->dev_lock);
1611                 break;
1612
1613         case USB_REQ_GET_CONFIGURATION:
1614                 if (ctrl->bRequestType != USB_DIR_IN)
1615                         break;
1616                 *(u8 *)req->buf = dev->dev_config;
1617                 ret = min(wLength, (u16)1);
1618                 break;
1619
1620         case USB_REQ_SET_INTERFACE:
1621                 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1622                                 || !dev->dev_config
1623                                 || wIndex >= GS_MAX_NUM_INTERFACES)
1624                         break;
1625                 if (dev->dev_config == GS_BULK_CONFIG_ID
1626                                 && wIndex != GS_BULK_INTERFACE_ID)
1627                         break;
1628                 /* no alternate interface settings */
1629                 if (wValue != 0)
1630                         break;
1631                 spin_lock(&dev->dev_lock);
1632                 /* PXA hardware partially handles SET_INTERFACE;
1633                  * we need to kluge around that interference.  */
1634                 if (gadget_is_pxa(gadget)) {
1635                         ret = gs_set_config(dev, use_acm ?
1636                                 GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
1637                         goto set_interface_done;
1638                 }
1639                 if (dev->dev_config != GS_BULK_CONFIG_ID
1640                                 && wIndex == GS_CONTROL_INTERFACE_ID) {
1641                         if (dev->dev_notify_ep) {
1642                                 usb_ep_disable(dev->dev_notify_ep);
1643                                 usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
1644                         }
1645                 } else {
1646                         usb_ep_disable(dev->dev_in_ep);
1647                         usb_ep_disable(dev->dev_out_ep);
1648                         usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
1649                         usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
1650                 }
1651                 ret = 0;
1652 set_interface_done:
1653                 spin_unlock(&dev->dev_lock);
1654                 break;
1655
1656         case USB_REQ_GET_INTERFACE:
1657                 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1658                 || dev->dev_config == GS_NO_CONFIG_ID)
1659                         break;
1660                 if (wIndex >= GS_MAX_NUM_INTERFACES
1661                                 || (dev->dev_config == GS_BULK_CONFIG_ID
1662                                 && wIndex != GS_BULK_INTERFACE_ID)) {
1663                         ret = -EDOM;
1664                         break;
1665                 }
1666                 /* no alternate interface settings */
1667                 *(u8 *)req->buf = 0;
1668                 ret = min(wLength, (u16)1);
1669                 break;
1670
1671         default:
1672                 printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1673                         ctrl->bRequestType, ctrl->bRequest,
1674                         wValue, wIndex, wLength);
1675                 break;
1676         }
1677
1678         return ret;
1679 }
1680
1681 static int gs_setup_class(struct usb_gadget *gadget,
1682         const struct usb_ctrlrequest *ctrl)
1683 {
1684         int ret = -EOPNOTSUPP;
1685         struct gs_dev *dev = get_gadget_data(gadget);
1686         struct gs_port *port = dev->dev_port[0];        /* ACM only has one port */
1687         struct usb_request *req = dev->dev_ctrl_req;
1688         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1689         u16 wValue = le16_to_cpu(ctrl->wValue);
1690         u16 wLength = le16_to_cpu(ctrl->wLength);
1691
1692         switch (ctrl->bRequest) {
1693         case USB_CDC_REQ_SET_LINE_CODING:
1694                 ret = min(wLength,
1695                         (u16)sizeof(struct usb_cdc_line_coding));
1696                 if (port) {
1697                         spin_lock(&port->port_lock);
1698                         memcpy(&port->port_line_coding, req->buf, ret);
1699                         spin_unlock(&port->port_lock);
1700                 }
1701                 ret = 0;
1702                 break;
1703
1704         case USB_CDC_REQ_GET_LINE_CODING:
1705                 port = dev->dev_port[0];        /* ACM only has one port */
1706                 ret = min(wLength,
1707                         (u16)sizeof(struct usb_cdc_line_coding));
1708                 if (port) {
1709                         spin_lock(&port->port_lock);
1710                         memcpy(req->buf, &port->port_line_coding, ret);
1711                         spin_unlock(&port->port_lock);
1712                 }
1713                 break;
1714
1715         case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
1716                 ret = 0;
1717                 break;
1718
1719         default:
1720                 printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1721                         ctrl->bRequestType, ctrl->bRequest,
1722                         wValue, wIndex, wLength);
1723                 break;
1724         }
1725
1726         return ret;
1727 }
1728
1729 /*
1730  * gs_setup_complete
1731  */
1732 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
1733 {
1734         if (req->status || req->actual != req->length) {
1735                 printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
1736                         req->status, req->actual, req->length);
1737         }
1738 }
1739
1740 /*
1741  * gs_disconnect
1742  *
1743  * Called when the device is disconnected.  Frees the closed
1744  * ports and disconnects open ports.  Open ports will be freed
1745  * on close.  Then reallocates the ports for the next connection.
1746  */
1747 static void gs_disconnect(struct usb_gadget *gadget)
1748 {
1749         unsigned long flags;
1750         struct gs_dev *dev = get_gadget_data(gadget);
1751
1752         spin_lock_irqsave(&dev->dev_lock, flags);
1753
1754         gs_reset_config(dev);
1755
1756         /* free closed ports and disconnect open ports */
1757         /* (open ports will be freed when closed) */
1758         gs_free_ports(dev);
1759
1760         /* re-allocate ports for the next connection */
1761         if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
1762                 printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
1763
1764         spin_unlock_irqrestore(&dev->dev_lock, flags);
1765
1766         printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
1767 }
1768
1769 /*
1770  * gs_set_config
1771  *
1772  * Configures the device by enabling device specific
1773  * optimizations, setting up the endpoints, allocating
1774  * read and write requests and queuing read requests.
1775  *
1776  * The device lock must be held when calling this function.
1777  */
1778 static int gs_set_config(struct gs_dev *dev, unsigned config)
1779 {
1780         int i;
1781         int ret = 0;
1782         struct usb_gadget *gadget = dev->dev_gadget;
1783         struct usb_ep *ep;
1784         struct usb_endpoint_descriptor *ep_desc;
1785         struct usb_request *req;
1786         struct gs_req_entry *req_entry;
1787
1788         if (dev == NULL) {
1789                 printk(KERN_ERR "gs_set_config: NULL device pointer\n");
1790                 return 0;
1791         }
1792
1793         if (config == dev->dev_config)
1794                 return 0;
1795
1796         gs_reset_config(dev);
1797
1798         switch (config) {
1799         case GS_NO_CONFIG_ID:
1800                 return 0;
1801         case GS_BULK_CONFIG_ID:
1802                 if (use_acm)
1803                         return -EINVAL;
1804                 /* device specific optimizations */
1805                 if (gadget_is_net2280(gadget))
1806                         net2280_set_fifo_mode(gadget, 1);
1807                 break;
1808         case GS_ACM_CONFIG_ID:
1809                 if (!use_acm)
1810                         return -EINVAL;
1811                 /* device specific optimizations */
1812                 if (gadget_is_net2280(gadget))
1813                         net2280_set_fifo_mode(gadget, 1);
1814                 break;
1815         default:
1816                 return -EINVAL;
1817         }
1818
1819         dev->dev_config = config;
1820
1821         gadget_for_each_ep(ep, gadget) {
1822
1823                 if (EP_NOTIFY_NAME
1824                 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
1825                         ep_desc = GS_SPEED_SELECT(
1826                                 gadget->speed == USB_SPEED_HIGH,
1827                                 &gs_highspeed_notify_desc,
1828                                 &gs_fullspeed_notify_desc);
1829                         ret = usb_ep_enable(ep,ep_desc);
1830                         if (ret == 0) {
1831                                 ep->driver_data = dev;
1832                                 dev->dev_notify_ep = ep;
1833                                 dev->dev_notify_ep_desc = ep_desc;
1834                         } else {
1835                                 printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
1836                                         ep->name, ret);
1837                                 goto exit_reset_config;
1838                         }
1839                 }
1840
1841                 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
1842                         ep_desc = GS_SPEED_SELECT(
1843                                 gadget->speed == USB_SPEED_HIGH,
1844                                 &gs_highspeed_in_desc,
1845                                 &gs_fullspeed_in_desc);
1846                         ret = usb_ep_enable(ep,ep_desc);
1847                         if (ret == 0) {
1848                                 ep->driver_data = dev;
1849                                 dev->dev_in_ep = ep;
1850                                 dev->dev_in_ep_desc = ep_desc;
1851                         } else {
1852                                 printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
1853                                         ep->name, ret);
1854                                 goto exit_reset_config;
1855                         }
1856                 }
1857
1858                 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
1859                         ep_desc = GS_SPEED_SELECT(
1860                                 gadget->speed == USB_SPEED_HIGH,
1861                                 &gs_highspeed_out_desc,
1862                                 &gs_fullspeed_out_desc);
1863                         ret = usb_ep_enable(ep,ep_desc);
1864                         if (ret == 0) {
1865                                 ep->driver_data = dev;
1866                                 dev->dev_out_ep = ep;
1867                                 dev->dev_out_ep_desc = ep_desc;
1868                         } else {
1869                                 printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
1870                                         ep->name, ret);
1871                                 goto exit_reset_config;
1872                         }
1873                 }
1874
1875         }
1876
1877         if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
1878         || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
1879                 printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
1880                 ret = -ENODEV;
1881                 goto exit_reset_config;
1882         }
1883
1884         /* allocate and queue read requests */
1885         ep = dev->dev_out_ep;
1886         for (i=0; i<read_q_size && ret == 0; i++) {
1887                 if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
1888                         req->complete = gs_read_complete;
1889                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1890                                 printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
1891                                         ret);
1892                         }
1893                 } else {
1894                         printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
1895                         ret = -ENOMEM;
1896                         goto exit_reset_config;
1897                 }
1898         }
1899
1900         /* allocate write requests, and put on free list */
1901         ep = dev->dev_in_ep;
1902         for (i=0; i<write_q_size; i++) {
1903                 if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
1904                         req_entry->re_req->complete = gs_write_complete;
1905                         list_add(&req_entry->re_entry, &dev->dev_req_list);
1906                 } else {
1907                         printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
1908                         ret = -ENOMEM;
1909                         goto exit_reset_config;
1910                 }
1911         }
1912
1913         printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
1914                 GS_LONG_NAME,
1915                 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
1916                 config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
1917
1918         return 0;
1919
1920 exit_reset_config:
1921         gs_reset_config(dev);
1922         return ret;
1923 }
1924
1925 /*
1926  * gs_reset_config
1927  *
1928  * Mark the device as not configured, disable all endpoints,
1929  * which forces completion of pending I/O and frees queued
1930  * requests, and free the remaining write requests on the
1931  * free list.
1932  *
1933  * The device lock must be held when calling this function.
1934  */
1935 static void gs_reset_config(struct gs_dev *dev)
1936 {
1937         struct gs_req_entry *req_entry;
1938
1939         if (dev == NULL) {
1940                 printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
1941                 return;
1942         }
1943
1944         if (dev->dev_config == GS_NO_CONFIG_ID)
1945                 return;
1946
1947         dev->dev_config = GS_NO_CONFIG_ID;
1948
1949         /* free write requests on the free list */
1950         while(!list_empty(&dev->dev_req_list)) {
1951                 req_entry = list_entry(dev->dev_req_list.next,
1952                         struct gs_req_entry, re_entry);
1953                 list_del(&req_entry->re_entry);
1954                 gs_free_req_entry(dev->dev_in_ep, req_entry);
1955         }
1956
1957         /* disable endpoints, forcing completion of pending i/o; */
1958         /* completion handlers free their requests in this case */
1959         if (dev->dev_notify_ep) {
1960                 usb_ep_disable(dev->dev_notify_ep);
1961                 dev->dev_notify_ep = NULL;
1962         }
1963         if (dev->dev_in_ep) {
1964                 usb_ep_disable(dev->dev_in_ep);
1965                 dev->dev_in_ep = NULL;
1966         }
1967         if (dev->dev_out_ep) {
1968                 usb_ep_disable(dev->dev_out_ep);
1969                 dev->dev_out_ep = NULL;
1970         }
1971 }
1972
1973 /*
1974  * gs_build_config_buf
1975  *
1976  * Builds the config descriptors in the given buffer and returns the
1977  * length, or a negative error number.
1978  */
1979 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
1980         u8 type, unsigned int index, int is_otg)
1981 {
1982         int len;
1983         int high_speed;
1984         const struct usb_config_descriptor *config_desc;
1985         const struct usb_descriptor_header **function;
1986
1987         if (index >= gs_device_desc.bNumConfigurations)
1988                 return -EINVAL;
1989
1990         /* other speed switches high and full speed */
1991         high_speed = (speed == USB_SPEED_HIGH);
1992         if (type == USB_DT_OTHER_SPEED_CONFIG)
1993                 high_speed = !high_speed;
1994
1995         if (use_acm) {
1996                 config_desc = &gs_acm_config_desc;
1997                 function = GS_SPEED_SELECT(high_speed,
1998                         gs_acm_highspeed_function,
1999                         gs_acm_fullspeed_function);
2000         } else {
2001                 config_desc = &gs_bulk_config_desc;
2002                 function = GS_SPEED_SELECT(high_speed,
2003                         gs_bulk_highspeed_function,
2004                         gs_bulk_fullspeed_function);
2005         }
2006
2007         /* for now, don't advertise srp-only devices */
2008         if (!is_otg)
2009                 function++;
2010
2011         len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
2012         if (len < 0)
2013                 return len;
2014
2015         ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
2016
2017         return len;
2018 }
2019
2020 /*
2021  * gs_alloc_req
2022  *
2023  * Allocate a usb_request and its buffer.  Returns a pointer to the
2024  * usb_request or NULL if there is an error.
2025  */
2026 static struct usb_request *
2027 gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
2028 {
2029         struct usb_request *req;
2030
2031         if (ep == NULL)
2032                 return NULL;
2033
2034         req = usb_ep_alloc_request(ep, kmalloc_flags);
2035
2036         if (req != NULL) {
2037                 req->length = len;
2038                 req->buf = kmalloc(len, kmalloc_flags);
2039                 if (req->buf == NULL) {
2040                         usb_ep_free_request(ep, req);
2041                         return NULL;
2042                 }
2043         }
2044
2045         return req;
2046 }
2047
2048 /*
2049  * gs_free_req
2050  *
2051  * Free a usb_request and its buffer.
2052  */
2053 static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
2054 {
2055         if (ep != NULL && req != NULL) {
2056                 kfree(req->buf);
2057                 usb_ep_free_request(ep, req);
2058         }
2059 }
2060
2061 /*
2062  * gs_alloc_req_entry
2063  *
2064  * Allocates a request and its buffer, using the given
2065  * endpoint, buffer len, and kmalloc flags.
2066  */
2067 static struct gs_req_entry *
2068 gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
2069 {
2070         struct gs_req_entry     *req;
2071
2072         req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
2073         if (req == NULL)
2074                 return NULL;
2075
2076         req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
2077         if (req->re_req == NULL) {
2078                 kfree(req);
2079                 return NULL;
2080         }
2081
2082         req->re_req->context = req;
2083
2084         return req;
2085 }
2086
2087 /*
2088  * gs_free_req_entry
2089  *
2090  * Frees a request and its buffer.
2091  */
2092 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
2093 {
2094         if (ep != NULL && req != NULL) {
2095                 if (req->re_req != NULL)
2096                         gs_free_req(ep, req->re_req);
2097                 kfree(req);
2098         }
2099 }
2100
2101 /*
2102  * gs_alloc_ports
2103  *
2104  * Allocate all ports and set the gs_dev struct to point to them.
2105  * Return 0 if successful, or a negative error number.
2106  *
2107  * The device lock is normally held when calling this function.
2108  */
2109 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
2110 {
2111         int i;
2112         struct gs_port *port;
2113
2114         if (dev == NULL)
2115                 return -EIO;
2116
2117         for (i=0; i<GS_NUM_PORTS; i++) {
2118                 if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
2119                         return -ENOMEM;
2120
2121                 port->port_dev = dev;
2122                 port->port_num = i;
2123                 port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
2124                 port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
2125                 port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
2126                 port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
2127                 spin_lock_init(&port->port_lock);
2128                 init_waitqueue_head(&port->port_write_wait);
2129
2130                 dev->dev_port[i] = port;
2131         }
2132
2133         return 0;
2134 }
2135
2136 /*
2137  * gs_free_ports
2138  *
2139  * Free all closed ports.  Open ports are disconnected by
2140  * freeing their write buffers, setting their device pointers
2141  * and the pointers to them in the device to NULL.  These
2142  * ports will be freed when closed.
2143  *
2144  * The device lock is normally held when calling this function.
2145  */
2146 static void gs_free_ports(struct gs_dev *dev)
2147 {
2148         int i;
2149         unsigned long flags;
2150         struct gs_port *port;
2151
2152         if (dev == NULL)
2153                 return;
2154
2155         for (i=0; i<GS_NUM_PORTS; i++) {
2156                 if ((port=dev->dev_port[i]) != NULL) {
2157                         dev->dev_port[i] = NULL;
2158
2159                         spin_lock_irqsave(&port->port_lock, flags);
2160
2161                         if (port->port_write_buf != NULL) {
2162                                 gs_buf_free(port->port_write_buf);
2163                                 port->port_write_buf = NULL;
2164                         }
2165
2166                         if (port->port_open_count > 0 || port->port_in_use) {
2167                                 port->port_dev = NULL;
2168                                 wake_up_interruptible(&port->port_write_wait);
2169                                 if (port->port_tty) {
2170                                         wake_up_interruptible(&port->port_tty->read_wait);
2171                                         wake_up_interruptible(&port->port_tty->write_wait);
2172                                 }
2173                                 spin_unlock_irqrestore(&port->port_lock, flags);
2174                         } else {
2175                                 spin_unlock_irqrestore(&port->port_lock, flags);
2176                                 kfree(port);
2177                         }
2178
2179                 }
2180         }
2181 }
2182
2183 /* Circular Buffer */
2184
2185 /*
2186  * gs_buf_alloc
2187  *
2188  * Allocate a circular buffer and all associated memory.
2189  */
2190 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
2191 {
2192         struct gs_buf *gb;
2193
2194         if (size == 0)
2195                 return NULL;
2196
2197         gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags);
2198         if (gb == NULL)
2199                 return NULL;
2200
2201         gb->buf_buf = kmalloc(size, kmalloc_flags);
2202         if (gb->buf_buf == NULL) {
2203                 kfree(gb);
2204                 return NULL;
2205         }
2206
2207         gb->buf_size = size;
2208         gb->buf_get = gb->buf_put = gb->buf_buf;
2209
2210         return gb;
2211 }
2212
2213 /*
2214  * gs_buf_free
2215  *
2216  * Free the buffer and all associated memory.
2217  */
2218 void gs_buf_free(struct gs_buf *gb)
2219 {
2220         if (gb) {
2221                 kfree(gb->buf_buf);
2222                 kfree(gb);
2223         }
2224 }
2225
2226 /*
2227  * gs_buf_clear
2228  *
2229  * Clear out all data in the circular buffer.
2230  */
2231 void gs_buf_clear(struct gs_buf *gb)
2232 {
2233         if (gb != NULL)
2234                 gb->buf_get = gb->buf_put;
2235                 /* equivalent to a get of all data available */
2236 }
2237
2238 /*
2239  * gs_buf_data_avail
2240  *
2241  * Return the number of bytes of data available in the circular
2242  * buffer.
2243  */
2244 unsigned int gs_buf_data_avail(struct gs_buf *gb)
2245 {
2246         if (gb != NULL)
2247                 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
2248         else
2249                 return 0;
2250 }
2251
2252 /*
2253  * gs_buf_space_avail
2254  *
2255  * Return the number of bytes of space available in the circular
2256  * buffer.
2257  */
2258 unsigned int gs_buf_space_avail(struct gs_buf *gb)
2259 {
2260         if (gb != NULL)
2261                 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
2262         else
2263                 return 0;
2264 }
2265
2266 /*
2267  * gs_buf_put
2268  *
2269  * Copy data data from a user buffer and put it into the circular buffer.
2270  * Restrict to the amount of space available.
2271  *
2272  * Return the number of bytes copied.
2273  */
2274 unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
2275 {
2276         unsigned int len;
2277
2278         if (gb == NULL)
2279                 return 0;
2280
2281         len  = gs_buf_space_avail(gb);
2282         if (count > len)
2283                 count = len;
2284
2285         if (count == 0)
2286                 return 0;
2287
2288         len = gb->buf_buf + gb->buf_size - gb->buf_put;
2289         if (count > len) {
2290                 memcpy(gb->buf_put, buf, len);
2291                 memcpy(gb->buf_buf, buf+len, count - len);
2292                 gb->buf_put = gb->buf_buf + count - len;
2293         } else {
2294                 memcpy(gb->buf_put, buf, count);
2295                 if (count < len)
2296                         gb->buf_put += count;
2297                 else /* count == len */
2298                         gb->buf_put = gb->buf_buf;
2299         }
2300
2301         return count;
2302 }
2303
2304 /*
2305  * gs_buf_get
2306  *
2307  * Get data from the circular buffer and copy to the given buffer.
2308  * Restrict to the amount of data available.
2309  *
2310  * Return the number of bytes copied.
2311  */
2312 unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
2313 {
2314         unsigned int len;
2315
2316         if (gb == NULL)
2317                 return 0;
2318
2319         len = gs_buf_data_avail(gb);
2320         if (count > len)
2321                 count = len;
2322
2323         if (count == 0)
2324                 return 0;
2325
2326         len = gb->buf_buf + gb->buf_size - gb->buf_get;
2327         if (count > len) {
2328                 memcpy(buf, gb->buf_get, len);
2329                 memcpy(buf+len, gb->buf_buf, count - len);
2330                 gb->buf_get = gb->buf_buf + count - len;
2331         } else {
2332                 memcpy(buf, gb->buf_get, count);
2333                 if (count < len)
2334                         gb->buf_get += count;
2335                 else /* count == len */
2336                         gb->buf_get = gb->buf_buf;
2337         }
2338
2339         return count;
2340 }