git.oblomov.eu Git - linux-2.6/blob - drivers/serial/sunzilog.c

   1 /*
   2  * sunzilog.c
   3  *
   4  * Driver for Zilog serial chips found on Sun workstations and
   5  * servers.  This driver could actually be made more generic.
   6  *
   7  * This is based on the old drivers/sbus/char/zs.c code.  A lot
   8  * of code has been simply moved over directly from there but
   9  * much has been rewritten.  Credits therefore go out to Eddie
  10  * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
  11  * work there.
  12  *
  13  *  Copyright (C) 2002 David S. Miller (davem@redhat.com)
  14  */
  15
  16 #include <linux/config.h>
  17 #include <linux/module.h>
  18 #include <linux/kernel.h>
  19 #include <linux/sched.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/tty.h>
  23 #include <linux/tty_flip.h>
  24 #include <linux/major.h>
  25 #include <linux/string.h>
  26 #include <linux/ptrace.h>
  27 #include <linux/ioport.h>
  28 #include <linux/slab.h>
  29 #include <linux/circ_buf.h>
  30 #include <linux/serial.h>
  31 #include <linux/sysrq.h>
  32 #include <linux/console.h>
  33 #include <linux/spinlock.h>
  34 #ifdef CONFIG_SERIO
  35 #include <linux/serio.h>
  36 #endif
  37 #include <linux/init.h>
  38
  39 #include <asm/io.h>
  40 #include <asm/irq.h>
  41 #ifdef CONFIG_SPARC64
  42 #include <asm/fhc.h>
  43 #endif
  44 #include <asm/sbus.h>
  45
  46 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  47 #define SUPPORT_SYSRQ
  48 #endif
  49
  50 #include <linux/serial_core.h>
  51
  52 #include "suncore.h"
  53 #include "sunzilog.h"
  54
  55 /* On 32-bit sparcs we need to delay after register accesses
  56  * to accommodate sun4 systems, but we do not need to flush writes.
  57  * On 64-bit sparc we only need to flush single writes to ensure
  58  * completion.
  59  */
  60 #ifndef CONFIG_SPARC64
  61 #define ZSDELAY()               udelay(5)
  62 #define ZSDELAY_LONG()          udelay(20)
  63 #define ZS_WSYNC(channel)       do { } while (0)
  64 #else
  65 #define ZSDELAY()
  66 #define ZSDELAY_LONG()
  67 #define ZS_WSYNC(__channel) \
  68         sbus_readb(&((__channel)->control))
  69 #endif
  70
  71 static int num_sunzilog;
  72 #define NUM_SUNZILOG    num_sunzilog
  73 #define NUM_CHANNELS    (NUM_SUNZILOG * 2)
  74
  75 #define KEYBOARD_LINE 0x2
  76 #define MOUSE_LINE    0x3
  77
  78 #define ZS_CLOCK                4915200 /* Zilog input clock rate. */
  79 #define ZS_CLOCK_DIVISOR        16      /* Divisor this driver uses. */
  80
  81 /*
  82  * We wrap our port structure around the generic uart_port.
  83  */
  84 struct uart_sunzilog_port {
  85         struct uart_port                port;
  86
  87         /* IRQ servicing chain.  */
  88         struct uart_sunzilog_port       *next;
  89
  90         /* Current values of Zilog write registers.  */
  91         unsigned char                   curregs[NUM_ZSREGS];
  92
  93         unsigned int                    flags;
  94 #define SUNZILOG_FLAG_CONS_KEYB         0x00000001
  95 #define SUNZILOG_FLAG_CONS_MOUSE        0x00000002
  96 #define SUNZILOG_FLAG_IS_CONS           0x00000004
  97 #define SUNZILOG_FLAG_IS_KGDB           0x00000008
  98 #define SUNZILOG_FLAG_MODEM_STATUS      0x00000010
  99 #define SUNZILOG_FLAG_IS_CHANNEL_A      0x00000020
 100 #define SUNZILOG_FLAG_REGS_HELD         0x00000040
 101 #define SUNZILOG_FLAG_TX_STOPPED        0x00000080
 102 #define SUNZILOG_FLAG_TX_ACTIVE         0x00000100
 103
 104         unsigned int cflag;
 105
 106         unsigned char                   parity_mask;
 107         unsigned char                   prev_status;
 108
 109 #ifdef CONFIG_SERIO
 110         struct serio                    *serio;
 111         int                             serio_open;
 112 #endif
 113 };
 114
 115 #define ZILOG_CHANNEL_FROM_PORT(PORT)   ((struct zilog_channel __iomem *)((PORT)->membase))
 116 #define UART_ZILOG(PORT)                ((struct uart_sunzilog_port *)(PORT))
 117
 118 #define ZS_IS_KEYB(UP)  ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
 119 #define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
 120 #define ZS_IS_CONS(UP)  ((UP)->flags & SUNZILOG_FLAG_IS_CONS)
 121 #define ZS_IS_KGDB(UP)  ((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
 122 #define ZS_WANTS_MODEM_STATUS(UP)       ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
 123 #define ZS_IS_CHANNEL_A(UP)     ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
 124 #define ZS_REGS_HELD(UP)        ((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
 125 #define ZS_TX_STOPPED(UP)       ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
 126 #define ZS_TX_ACTIVE(UP)        ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
 127
 128 /* Reading and writing Zilog8530 registers.  The delays are to make this
 129  * driver work on the Sun4 which needs a settling delay after each chip
 130  * register access, other machines handle this in hardware via auxiliary
 131  * flip-flops which implement the settle time we do in software.
 132  *
 133  * The port lock must be held and local IRQs must be disabled
 134  * when {read,write}_zsreg is invoked.
 135  */
 136 static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
 137                                 unsigned char reg)
 138 {
 139         unsigned char retval;
 140
 141         sbus_writeb(reg, &channel->control);
 142         ZSDELAY();
 143         retval = sbus_readb(&channel->control);
 144         ZSDELAY();
 145
 146         return retval;
 147 }
 148
 149 static void write_zsreg(struct zilog_channel __iomem *channel,
 150                         unsigned char reg, unsigned char value)
 151 {
 152         sbus_writeb(reg, &channel->control);
 153         ZSDELAY();
 154         sbus_writeb(value, &channel->control);
 155         ZSDELAY();
 156 }
 157
 158 static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
 159 {
 160         int i;
 161
 162         for (i = 0; i < 32; i++) {
 163                 unsigned char regval;
 164
 165                 regval = sbus_readb(&channel->control);
 166                 ZSDELAY();
 167                 if (regval & Rx_CH_AV)
 168                         break;
 169
 170                 regval = read_zsreg(channel, R1);
 171                 sbus_readb(&channel->data);
 172                 ZSDELAY();
 173
 174                 if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
 175                         sbus_writeb(ERR_RES, &channel->control);
 176                         ZSDELAY();
 177                         ZS_WSYNC(channel);
 178                 }
 179         }
 180 }
 181
 182 /* This function must only be called when the TX is not busy.  The UART
 183  * port lock must be held and local interrupts disabled.
 184  */
 185 static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
 186 {
 187         int i;
 188
 189         /* Let pending transmits finish.  */
 190         for (i = 0; i < 1000; i++) {
 191                 unsigned char stat = read_zsreg(channel, R1);
 192                 if (stat & ALL_SNT)
 193                         break;
 194                 udelay(100);
 195         }
 196
 197         sbus_writeb(ERR_RES, &channel->control);
 198         ZSDELAY();
 199         ZS_WSYNC(channel);
 200
 201         sunzilog_clear_fifo(channel);
 202
 203         /* Disable all interrupts.  */
 204         write_zsreg(channel, R1,
 205                     regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
 206
 207         /* Set parity, sync config, stop bits, and clock divisor.  */
 208         write_zsreg(channel, R4, regs[R4]);
 209
 210         /* Set misc. TX/RX control bits.  */
 211         write_zsreg(channel, R10, regs[R10]);
 212
 213         /* Set TX/RX controls sans the enable bits.  */
 214         write_zsreg(channel, R3, regs[R3] & ~RxENAB);
 215         write_zsreg(channel, R5, regs[R5] & ~TxENAB);
 216
 217         /* Synchronous mode config.  */
 218         write_zsreg(channel, R6, regs[R6]);
 219         write_zsreg(channel, R7, regs[R7]);
 220
 221         /* Don't mess with the interrupt vector (R2, unused by us) and
 222          * master interrupt control (R9).  We make sure this is setup
 223          * properly at probe time then never touch it again.
 224          */
 225
 226         /* Disable baud generator.  */
 227         write_zsreg(channel, R14, regs[R14] & ~BRENAB);
 228
 229         /* Clock mode control.  */
 230         write_zsreg(channel, R11, regs[R11]);
 231
 232         /* Lower and upper byte of baud rate generator divisor.  */
 233         write_zsreg(channel, R12, regs[R12]);
 234         write_zsreg(channel, R13, regs[R13]);
 235
 236         /* Now rewrite R14, with BRENAB (if set).  */
 237         write_zsreg(channel, R14, regs[R14]);
 238
 239         /* External status interrupt control.  */
 240         write_zsreg(channel, R15, regs[R15]);
 241
 242         /* Reset external status interrupts.  */
 243         write_zsreg(channel, R0, RES_EXT_INT);
 244         write_zsreg(channel, R0, RES_EXT_INT);
 245
 246         /* Rewrite R3/R5, this time without enables masked.  */
 247         write_zsreg(channel, R3, regs[R3]);
 248         write_zsreg(channel, R5, regs[R5]);
 249
 250         /* Rewrite R1, this time without IRQ enabled masked.  */
 251         write_zsreg(channel, R1, regs[R1]);
 252 }
 253
 254 /* Reprogram the Zilog channel HW registers with the copies found in the
 255  * software state struct.  If the transmitter is busy, we defer this update
 256  * until the next TX complete interrupt.  Else, we do it right now.
 257  *
 258  * The UART port lock must be held and local interrupts disabled.
 259  */
 260 static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
 261                                        struct zilog_channel __iomem *channel)
 262 {
 263         if (!ZS_REGS_HELD(up)) {
 264                 if (ZS_TX_ACTIVE(up)) {
 265                         up->flags |= SUNZILOG_FLAG_REGS_HELD;
 266                 } else {
 267                         __load_zsregs(channel, up->curregs);
 268                 }
 269         }
 270 }
 271
 272 static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
 273 {
 274         unsigned int cur_cflag = up->cflag;
 275         int brg, new_baud;
 276
 277         up->cflag &= ~CBAUD;
 278         up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
 279
 280         brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
 281         up->curregs[R12] = (brg & 0xff);
 282         up->curregs[R13] = (brg >> 8) & 0xff;
 283         sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
 284 }
 285
 286 static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
 287                                          unsigned char ch, int is_break,
 288                                          struct pt_regs *regs)
 289 {
 290         if (ZS_IS_KEYB(up)) {
 291                 /* Stop-A is handled by drivers/char/keyboard.c now. */
 292 #ifdef CONFIG_SERIO
 293                 if (up->serio_open)
 294                         serio_interrupt(up->serio, ch, 0, regs);
 295 #endif
 296         } else if (ZS_IS_MOUSE(up)) {
 297                 int ret = suncore_mouse_baud_detection(ch, is_break);
 298
 299                 switch (ret) {
 300                 case 2:
 301                         sunzilog_change_mouse_baud(up);
 302                         /* fallthru */
 303                 case 1:
 304                         break;
 305
 306                 case 0:
 307 #ifdef CONFIG_SERIO
 308                         if (up->serio_open)
 309                                 serio_interrupt(up->serio, ch, 0, regs);
 310 #endif
 311                         break;
 312                 };
 313         }
 314 }
 315
 316 static struct tty_struct *
 317 sunzilog_receive_chars(struct uart_sunzilog_port *up,
 318                        struct zilog_channel __iomem *channel,
 319                        struct pt_regs *regs)
 320 {
 321         struct tty_struct *tty;
 322         unsigned char ch, r1;
 323
 324         tty = NULL;
 325         if (up->port.info != NULL &&            /* Unopened serial console */
 326             up->port.info->tty != NULL)         /* Keyboard || mouse */
 327                 tty = up->port.info->tty;
 328
 329         for (;;) {
 330
 331                 r1 = read_zsreg(channel, R1);
 332                 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
 333                         sbus_writeb(ERR_RES, &channel->control);
 334                         ZSDELAY();
 335                         ZS_WSYNC(channel);
 336                 }
 337
 338                 ch = sbus_readb(&channel->control);
 339                 ZSDELAY();
 340
 341                 /* This funny hack depends upon BRK_ABRT not interfering
 342                  * with the other bits we care about in R1.
 343                  */
 344                 if (ch & BRK_ABRT)
 345                         r1 |= BRK_ABRT;
 346
 347                 if (!(ch & Rx_CH_AV))
 348                         break;
 349
 350                 ch = sbus_readb(&channel->data);
 351                 ZSDELAY();
 352
 353                 ch &= up->parity_mask;
 354
 355                 if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
 356                         sunzilog_kbdms_receive_chars(up, ch, 0, regs);
 357                         continue;
 358                 }
 359
 360                 if (tty == NULL) {
 361                         uart_handle_sysrq_char(&up->port, ch, regs);
 362                         continue;
 363                 }
 364
 365                 if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
 366                         tty->flip.work.func((void *)tty);
 367                         /*
 368                          * The 8250 bails out of the loop here,
 369                          * but we need to read everything, or die.
 370                          */
 371                         if (tty->flip.count >= TTY_FLIPBUF_SIZE)
 372                                 continue;
 373                 }
 374
 375                 /* A real serial line, record the character and status.  */
 376                 *tty->flip.char_buf_ptr = ch;
 377                 *tty->flip.flag_buf_ptr = TTY_NORMAL;
 378                 up->port.icount.rx++;
 379                 if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
 380                         if (r1 & BRK_ABRT) {
 381                                 r1 &= ~(PAR_ERR | CRC_ERR);
 382                                 up->port.icount.brk++;
 383                                 if (uart_handle_break(&up->port))
 384                                         continue;
 385                         }
 386                         else if (r1 & PAR_ERR)
 387                                 up->port.icount.parity++;
 388                         else if (r1 & CRC_ERR)
 389                                 up->port.icount.frame++;
 390                         if (r1 & Rx_OVR)
 391                                 up->port.icount.overrun++;
 392                         r1 &= up->port.read_status_mask;
 393                         if (r1 & BRK_ABRT)
 394                                 *tty->flip.flag_buf_ptr = TTY_BREAK;
 395                         else if (r1 & PAR_ERR)
 396                                 *tty->flip.flag_buf_ptr = TTY_PARITY;
 397                         else if (r1 & CRC_ERR)
 398                                 *tty->flip.flag_buf_ptr = TTY_FRAME;
 399                 }
 400                 if (uart_handle_sysrq_char(&up->port, ch, regs))
 401                         continue;
 402
 403                 if (up->port.ignore_status_mask == 0xff ||
 404                     (r1 & up->port.ignore_status_mask) == 0) {
 405                         tty->flip.flag_buf_ptr++;
 406                         tty->flip.char_buf_ptr++;
 407                         tty->flip.count++;
 408                 }
 409                 if ((r1 & Rx_OVR) &&
 410                     tty->flip.count < TTY_FLIPBUF_SIZE) {
 411                         *tty->flip.flag_buf_ptr = TTY_OVERRUN;
 412                         tty->flip.flag_buf_ptr++;
 413                         tty->flip.char_buf_ptr++;
 414                         tty->flip.count++;
 415                 }
 416         }
 417
 418         return tty;
 419 }
 420
 421 static void sunzilog_status_handle(struct uart_sunzilog_port *up,
 422                                    struct zilog_channel __iomem *channel,
 423                                    struct pt_regs *regs)
 424 {
 425         unsigned char status;
 426
 427         status = sbus_readb(&channel->control);
 428         ZSDELAY();
 429
 430         sbus_writeb(RES_EXT_INT, &channel->control);
 431         ZSDELAY();
 432         ZS_WSYNC(channel);
 433
 434         if (status & BRK_ABRT) {
 435                 if (ZS_IS_MOUSE(up))
 436                         sunzilog_kbdms_receive_chars(up, 0, 1, regs);
 437                 if (ZS_IS_CONS(up)) {
 438                         /* Wait for BREAK to deassert to avoid potentially
 439                          * confusing the PROM.
 440                          */
 441                         while (1) {
 442                                 status = sbus_readb(&channel->control);
 443                                 ZSDELAY();
 444                                 if (!(status & BRK_ABRT))
 445                                         break;
 446                         }
 447                         sun_do_break();
 448                         return;
 449                 }
 450         }
 451
 452         if (ZS_WANTS_MODEM_STATUS(up)) {
 453                 if (status & SYNC)
 454                         up->port.icount.dsr++;
 455
 456                 /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
 457                  * But it does not tell us which bit has changed, we have to keep
 458                  * track of this ourselves.
 459                  */
 460                 if ((status ^ up->prev_status) ^ DCD)
 461                         uart_handle_dcd_change(&up->port,
 462                                                (status & DCD));
 463                 if ((status ^ up->prev_status) ^ CTS)
 464                         uart_handle_cts_change(&up->port,
 465                                                (status & CTS));
 466
 467                 wake_up_interruptible(&up->port.info->delta_msr_wait);
 468         }
 469
 470         up->prev_status = status;
 471 }
 472
 473 static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
 474                                     struct zilog_channel __iomem *channel)
 475 {
 476         struct circ_buf *xmit;
 477
 478         if (ZS_IS_CONS(up)) {
 479                 unsigned char status = sbus_readb(&channel->control);
 480                 ZSDELAY();
 481
 482                 /* TX still busy?  Just wait for the next TX done interrupt.
 483                  *
 484                  * It can occur because of how we do serial console writes.  It would
 485                  * be nice to transmit console writes just like we normally would for
 486                  * a TTY line. (ie. buffered and TX interrupt driven).  That is not
 487                  * easy because console writes cannot sleep.  One solution might be
 488                  * to poll on enough port->xmit space becomming free.  -DaveM
 489                  */
 490                 if (!(status & Tx_BUF_EMP))
 491                         return;
 492         }
 493
 494         up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
 495
 496         if (ZS_REGS_HELD(up)) {
 497                 __load_zsregs(channel, up->curregs);
 498                 up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
 499         }
 500
 501         if (ZS_TX_STOPPED(up)) {
 502                 up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
 503                 goto ack_tx_int;
 504         }
 505
 506         if (up->port.x_char) {
 507                 up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
 508                 sbus_writeb(up->port.x_char, &channel->data);
 509                 ZSDELAY();
 510                 ZS_WSYNC(channel);
 511
 512                 up->port.icount.tx++;
 513                 up->port.x_char = 0;
 514                 return;
 515         }
 516
 517         if (up->port.info == NULL)
 518                 goto ack_tx_int;
 519         xmit = &up->port.info->xmit;
 520         if (uart_circ_empty(xmit)) {
 521                 uart_write_wakeup(&up->port);
 522                 goto ack_tx_int;
 523         }
 524         if (uart_tx_stopped(&up->port))
 525                 goto ack_tx_int;
 526
 527         up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
 528         sbus_writeb(xmit->buf[xmit->tail], &channel->data);
 529         ZSDELAY();
 530         ZS_WSYNC(channel);
 531
 532         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 533         up->port.icount.tx++;
 534
 535         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 536                 uart_write_wakeup(&up->port);
 537
 538         return;
 539
 540 ack_tx_int:
 541         sbus_writeb(RES_Tx_P, &channel->control);
 542         ZSDELAY();
 543         ZS_WSYNC(channel);
 544 }
 545
 546 static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 547 {
 548         struct uart_sunzilog_port *up = dev_id;
 549
 550         while (up) {
 551                 struct zilog_channel __iomem *channel
 552                         = ZILOG_CHANNEL_FROM_PORT(&up->port);
 553                 struct tty_struct *tty;
 554                 unsigned char r3;
 555
 556                 spin_lock(&up->port.lock);
 557                 r3 = read_zsreg(channel, R3);
 558
 559                 /* Channel A */
 560                 tty = NULL;
 561                 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
 562                         sbus_writeb(RES_H_IUS, &channel->control);
 563                         ZSDELAY();
 564                         ZS_WSYNC(channel);
 565
 566                         if (r3 & CHARxIP)
 567                                 tty = sunzilog_receive_chars(up, channel, regs);
 568                         if (r3 & CHAEXT)
 569                                 sunzilog_status_handle(up, channel, regs);
 570                         if (r3 & CHATxIP)
 571                                 sunzilog_transmit_chars(up, channel);
 572                 }
 573                 spin_unlock(&up->port.lock);
 574
 575                 if (tty)
 576                         tty_flip_buffer_push(tty);
 577
 578                 /* Channel B */
 579                 up = up->next;
 580                 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 581
 582                 spin_lock(&up->port.lock);
 583                 tty = NULL;
 584                 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
 585                         sbus_writeb(RES_H_IUS, &channel->control);
 586                         ZSDELAY();
 587                         ZS_WSYNC(channel);
 588
 589                         if (r3 & CHBRxIP)
 590                                 tty = sunzilog_receive_chars(up, channel, regs);
 591                         if (r3 & CHBEXT)
 592                                 sunzilog_status_handle(up, channel, regs);
 593                         if (r3 & CHBTxIP)
 594                                 sunzilog_transmit_chars(up, channel);
 595                 }
 596                 spin_unlock(&up->port.lock);
 597
 598                 if (tty)
 599                         tty_flip_buffer_push(tty);
 600
 601                 up = up->next;
 602         }
 603
 604         return IRQ_HANDLED;
 605 }
 606
 607 /* A convenient way to quickly get R0 status.  The caller must _not_ hold the
 608  * port lock, it is acquired here.
 609  */
 610 static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
 611 {
 612         struct zilog_channel __iomem *channel;
 613         unsigned long flags;
 614         unsigned char status;
 615
 616         spin_lock_irqsave(&port->lock, flags);
 617
 618         channel = ZILOG_CHANNEL_FROM_PORT(port);
 619         status = sbus_readb(&channel->control);
 620         ZSDELAY();
 621
 622         spin_unlock_irqrestore(&port->lock, flags);
 623
 624         return status;
 625 }
 626
 627 /* The port lock is not held.  */
 628 static unsigned int sunzilog_tx_empty(struct uart_port *port)
 629 {
 630         unsigned char status;
 631         unsigned int ret;
 632
 633         status = sunzilog_read_channel_status(port);
 634         if (status & Tx_BUF_EMP)
 635                 ret = TIOCSER_TEMT;
 636         else
 637                 ret = 0;
 638
 639         return ret;
 640 }
 641
 642 /* The port lock is not held.  */
 643 static unsigned int sunzilog_get_mctrl(struct uart_port *port)
 644 {
 645         unsigned char status;
 646         unsigned int ret;
 647
 648         status = sunzilog_read_channel_status(port);
 649
 650         ret = 0;
 651         if (status & DCD)
 652                 ret |= TIOCM_CAR;
 653         if (status & SYNC)
 654                 ret |= TIOCM_DSR;
 655         if (status & CTS)
 656                 ret |= TIOCM_CTS;
 657
 658         return ret;
 659 }
 660
 661 /* The port lock is held and interrupts are disabled.  */
 662 static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
 663 {
 664         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 665         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 666         unsigned char set_bits, clear_bits;
 667
 668         set_bits = clear_bits = 0;
 669
 670         if (mctrl & TIOCM_RTS)
 671                 set_bits |= RTS;
 672         else
 673                 clear_bits |= RTS;
 674         if (mctrl & TIOCM_DTR)
 675                 set_bits |= DTR;
 676         else
 677                 clear_bits |= DTR;
 678
 679         /* NOTE: Not subject to 'transmitter active' rule.  */
 680         up->curregs[R5] |= set_bits;
 681         up->curregs[R5] &= ~clear_bits;
 682         write_zsreg(channel, R5, up->curregs[R5]);
 683 }
 684
 685 /* The port lock is held and interrupts are disabled.  */
 686 static void sunzilog_stop_tx(struct uart_port *port, unsigned int tty_stop)
 687 {
 688         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 689
 690         up->flags |= SUNZILOG_FLAG_TX_STOPPED;
 691 }
 692
 693 /* The port lock is held and interrupts are disabled.  */
 694 static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
 695 {
 696         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 697         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 698         unsigned char status;
 699
 700         up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
 701         up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
 702
 703         status = sbus_readb(&channel->control);
 704         ZSDELAY();
 705
 706         /* TX busy?  Just wait for the TX done interrupt.  */
 707         if (!(status & Tx_BUF_EMP))
 708                 return;
 709
 710         /* Send the first character to jump-start the TX done
 711          * IRQ sending engine.
 712          */
 713         if (port->x_char) {
 714                 sbus_writeb(port->x_char, &channel->data);
 715                 ZSDELAY();
 716                 ZS_WSYNC(channel);
 717
 718                 port->icount.tx++;
 719                 port->x_char = 0;
 720         } else {
 721                 struct circ_buf *xmit = &port->info->xmit;
 722
 723                 sbus_writeb(xmit->buf[xmit->tail], &channel->data);
 724                 ZSDELAY();
 725                 ZS_WSYNC(channel);
 726
 727                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 728                 port->icount.tx++;
 729
 730                 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 731                         uart_write_wakeup(&up->port);
 732         }
 733 }
 734
 735 /* The port lock is held.  */
 736 static void sunzilog_stop_rx(struct uart_port *port)
 737 {
 738         struct uart_sunzilog_port *up = UART_ZILOG(port);
 739         struct zilog_channel __iomem *channel;
 740
 741         if (ZS_IS_CONS(up))
 742                 return;
 743
 744         channel = ZILOG_CHANNEL_FROM_PORT(port);
 745
 746         /* Disable all RX interrupts.  */
 747         up->curregs[R1] &= ~RxINT_MASK;
 748         sunzilog_maybe_update_regs(up, channel);
 749 }
 750
 751 /* The port lock is held.  */
 752 static void sunzilog_enable_ms(struct uart_port *port)
 753 {
 754         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 755         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 756         unsigned char new_reg;
 757
 758         new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
 759         if (new_reg != up->curregs[R15]) {
 760                 up->curregs[R15] = new_reg;
 761
 762                 /* NOTE: Not subject to 'transmitter active' rule.  */
 763                 write_zsreg(channel, R15, up->curregs[R15]);
 764         }
 765 }
 766
 767 /* The port lock is not held.  */
 768 static void sunzilog_break_ctl(struct uart_port *port, int break_state)
 769 {
 770         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 771         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 772         unsigned char set_bits, clear_bits, new_reg;
 773         unsigned long flags;
 774
 775         set_bits = clear_bits = 0;
 776
 777         if (break_state)
 778                 set_bits |= SND_BRK;
 779         else
 780                 clear_bits |= SND_BRK;
 781
 782         spin_lock_irqsave(&port->lock, flags);
 783
 784         new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
 785         if (new_reg != up->curregs[R5]) {
 786                 up->curregs[R5] = new_reg;
 787
 788                 /* NOTE: Not subject to 'transmitter active' rule.  */
 789                 write_zsreg(channel, R5, up->curregs[R5]);
 790         }
 791
 792         spin_unlock_irqrestore(&port->lock, flags);
 793 }
 794
 795 static void __sunzilog_startup(struct uart_sunzilog_port *up)
 796 {
 797         struct zilog_channel __iomem *channel;
 798
 799         channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 800         up->prev_status = sbus_readb(&channel->control);
 801
 802         /* Enable receiver and transmitter.  */
 803         up->curregs[R3] |= RxENAB;
 804         up->curregs[R5] |= TxENAB;
 805
 806         up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
 807         sunzilog_maybe_update_regs(up, channel);
 808 }
 809
 810 static int sunzilog_startup(struct uart_port *port)
 811 {
 812         struct uart_sunzilog_port *up = UART_ZILOG(port);
 813         unsigned long flags;
 814
 815         if (ZS_IS_CONS(up))
 816                 return 0;
 817
 818         spin_lock_irqsave(&port->lock, flags);
 819         __sunzilog_startup(up);
 820         spin_unlock_irqrestore(&port->lock, flags);
 821         return 0;
 822 }
 823
 824 /*
 825  * The test for ZS_IS_CONS is explained by the following e-mail:
 826  *****
 827  * From: Russell King <rmk@arm.linux.org.uk>
 828  * Date: Sun, 8 Dec 2002 10:18:38 +0000
 829  *
 830  * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
 831  * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
 832  * > and I noticed that something is not right with reference
 833  * > counting in this case. It seems that when the console
 834  * > is open by kernel initially, this is not accounted
 835  * > as an open, and uart_startup is not called.
 836  *
 837  * That is correct.  We are unable to call uart_startup when the serial
 838  * console is initialised because it may need to allocate memory (as
 839  * request_irq does) and the memory allocators may not have been
 840  * initialised.
 841  *
 842  * 1. initialise the port into a state where it can send characters in the
 843  *    console write method.
 844  *
 845  * 2. don't do the actual hardware shutdown in your shutdown() method (but
 846  *    do the normal software shutdown - ie, free irqs etc)
 847  *****
 848  */
 849 static void sunzilog_shutdown(struct uart_port *port)
 850 {
 851         struct uart_sunzilog_port *up = UART_ZILOG(port);
 852         struct zilog_channel __iomem *channel;
 853         unsigned long flags;
 854
 855         if (ZS_IS_CONS(up))
 856                 return;
 857
 858         spin_lock_irqsave(&port->lock, flags);
 859
 860         channel = ZILOG_CHANNEL_FROM_PORT(port);
 861
 862         /* Disable receiver and transmitter.  */
 863         up->curregs[R3] &= ~RxENAB;
 864         up->curregs[R5] &= ~TxENAB;
 865
 866         /* Disable all interrupts and BRK assertion.  */
 867         up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
 868         up->curregs[R5] &= ~SND_BRK;
 869         sunzilog_maybe_update_regs(up, channel);
 870
 871         spin_unlock_irqrestore(&port->lock, flags);
 872 }
 873
 874 /* Shared by TTY driver and serial console setup.  The port lock is held
 875  * and local interrupts are disabled.
 876  */
 877 static void
 878 sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
 879                        unsigned int iflag, int brg)
 880 {
 881
 882         up->curregs[R10] = NRZ;
 883         up->curregs[R11] = TCBR | RCBR;
 884
 885         /* Program BAUD and clock source. */
 886         up->curregs[R4] &= ~XCLK_MASK;
 887         up->curregs[R4] |= X16CLK;
 888         up->curregs[R12] = brg & 0xff;
 889         up->curregs[R13] = (brg >> 8) & 0xff;
 890         up->curregs[R14] = BRSRC | BRENAB;
 891
 892         /* Character size, stop bits, and parity. */
 893         up->curregs[3] &= ~RxN_MASK;
 894         up->curregs[5] &= ~TxN_MASK;
 895         switch (cflag & CSIZE) {
 896         case CS5:
 897                 up->curregs[3] |= Rx5;
 898                 up->curregs[5] |= Tx5;
 899                 up->parity_mask = 0x1f;
 900                 break;
 901         case CS6:
 902                 up->curregs[3] |= Rx6;
 903                 up->curregs[5] |= Tx6;
 904                 up->parity_mask = 0x3f;
 905                 break;
 906         case CS7:
 907                 up->curregs[3] |= Rx7;
 908                 up->curregs[5] |= Tx7;
 909                 up->parity_mask = 0x7f;
 910                 break;
 911         case CS8:
 912         default:
 913                 up->curregs[3] |= Rx8;
 914                 up->curregs[5] |= Tx8;
 915                 up->parity_mask = 0xff;
 916                 break;
 917         };
 918         up->curregs[4] &= ~0x0c;
 919         if (cflag & CSTOPB)
 920                 up->curregs[4] |= SB2;
 921         else
 922                 up->curregs[4] |= SB1;
 923         if (cflag & PARENB)
 924                 up->curregs[4] |= PAR_ENAB;
 925         else
 926                 up->curregs[4] &= ~PAR_ENAB;
 927         if (!(cflag & PARODD))
 928                 up->curregs[4] |= PAR_EVEN;
 929         else
 930                 up->curregs[4] &= ~PAR_EVEN;
 931
 932         up->port.read_status_mask = Rx_OVR;
 933         if (iflag & INPCK)
 934                 up->port.read_status_mask |= CRC_ERR | PAR_ERR;
 935         if (iflag & (BRKINT | PARMRK))
 936                 up->port.read_status_mask |= BRK_ABRT;
 937
 938         up->port.ignore_status_mask = 0;
 939         if (iflag & IGNPAR)
 940                 up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
 941         if (iflag & IGNBRK) {
 942                 up->port.ignore_status_mask |= BRK_ABRT;
 943                 if (iflag & IGNPAR)
 944                         up->port.ignore_status_mask |= Rx_OVR;
 945         }
 946
 947         if ((cflag & CREAD) == 0)
 948                 up->port.ignore_status_mask = 0xff;
 949 }
 950
 951 /* The port lock is not held.  */
 952 static void
 953 sunzilog_set_termios(struct uart_port *port, struct termios *termios,
 954                      struct termios *old)
 955 {
 956         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 957         unsigned long flags;
 958         int baud, brg;
 959
 960         baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
 961
 962         spin_lock_irqsave(&up->port.lock, flags);
 963
 964         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
 965
 966         sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
 967
 968         if (UART_ENABLE_MS(&up->port, termios->c_cflag))
 969                 up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
 970         else
 971                 up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
 972
 973         up->cflag = termios->c_cflag;
 974
 975         sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
 976
 977         uart_update_timeout(port, termios->c_cflag, baud);
 978
 979         spin_unlock_irqrestore(&up->port.lock, flags);
 980 }
 981
 982 static const char *sunzilog_type(struct uart_port *port)
 983 {
 984         return "SunZilog";
 985 }
 986
 987 /* We do not request/release mappings of the registers here, this
 988  * happens at early serial probe time.
 989  */
 990 static void sunzilog_release_port(struct uart_port *port)
 991 {
 992 }
 993
 994 static int sunzilog_request_port(struct uart_port *port)
 995 {
 996         return 0;
 997 }
 998
 999 /* These do not need to do anything interesting either.  */
1000 static void sunzilog_config_port(struct uart_port *port, int flags)
1001 {
1002 }
1003
1004 /* We do not support letting the user mess with the divisor, IRQ, etc. */
1005 static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
1006 {
1007         return -EINVAL;
1008 }
1009
1010 static struct uart_ops sunzilog_pops = {
1011         .tx_empty       =       sunzilog_tx_empty,
1012         .set_mctrl      =       sunzilog_set_mctrl,
1013         .get_mctrl      =       sunzilog_get_mctrl,
1014         .stop_tx        =       sunzilog_stop_tx,
1015         .start_tx       =       sunzilog_start_tx,
1016         .stop_rx        =       sunzilog_stop_rx,
1017         .enable_ms      =       sunzilog_enable_ms,
1018         .break_ctl      =       sunzilog_break_ctl,
1019         .startup        =       sunzilog_startup,
1020         .shutdown       =       sunzilog_shutdown,
1021         .set_termios    =       sunzilog_set_termios,
1022         .type           =       sunzilog_type,
1023         .release_port   =       sunzilog_release_port,
1024         .request_port   =       sunzilog_request_port,
1025         .config_port    =       sunzilog_config_port,
1026         .verify_port    =       sunzilog_verify_port,
1027 };
1028
1029 static struct uart_sunzilog_port *sunzilog_port_table;
1030 static struct zilog_layout __iomem **sunzilog_chip_regs;
1031
1032 static struct uart_sunzilog_port *sunzilog_irq_chain;
1033 static int zilog_irq = -1;
1034
1035 static struct uart_driver sunzilog_reg = {
1036         .owner          =       THIS_MODULE,
1037         .driver_name    =       "ttyS",
1038         .devfs_name     =       "tts/",
1039         .dev_name       =       "ttyS",
1040         .major          =       TTY_MAJOR,
1041 };
1042
1043 static void * __init alloc_one_table(unsigned long size)
1044 {
1045         void *ret;
1046
1047         ret = kmalloc(size, GFP_KERNEL);
1048         if (ret != NULL)
1049                 memset(ret, 0, size);
1050
1051         return ret;
1052 }
1053
1054 static void __init sunzilog_alloc_tables(void)
1055 {
1056         sunzilog_port_table =
1057                 alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
1058         sunzilog_chip_regs =
1059                 alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *));
1060
1061         if (sunzilog_port_table == NULL || sunzilog_chip_regs == NULL) {
1062                 prom_printf("SunZilog: Cannot allocate tables.\n");
1063                 prom_halt();
1064         }
1065 }
1066
1067 #ifdef CONFIG_SPARC64
1068
1069 /* We used to attempt to use the address property of the Zilog device node
1070  * but that totally is not necessary on sparc64.
1071  */
1072 static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
1073 {
1074         unsigned long mapped_addr;
1075         unsigned int sun4u_ino;
1076         struct sbus_bus *sbus = NULL;
1077         struct sbus_dev *sdev = NULL;
1078         int err;
1079
1080         if (central_bus == NULL) {
1081                 for_each_sbus(sbus) {
1082                         for_each_sbusdev(sdev, sbus) {
1083                                 if (sdev->prom_node == zsnode)
1084                                         goto found;
1085                         }
1086                 }
1087         }
1088  found:
1089         if (sdev == NULL && central_bus == NULL) {
1090                 prom_printf("SunZilog: sdev&&central == NULL for "
1091                             "Zilog %d in get_zs_sun4u.\n", chip);
1092                 prom_halt();
1093         }
1094         if (central_bus == NULL) {
1095                 mapped_addr =
1096                         sbus_ioremap(&sdev->resource[0], 0,
1097                                      PAGE_SIZE,
1098                                      "Zilog Registers");
1099         } else {
1100                 struct linux_prom_registers zsregs[1];
1101
1102                 err = prom_getproperty(zsnode, "reg",
1103                                        (char *) &zsregs[0],
1104                                        sizeof(zsregs));
1105                 if (err == -1) {
1106                         prom_printf("SunZilog: Cannot map "
1107                                     "Zilog %d regs on "
1108                                     "central bus.\n", chip);
1109                         prom_halt();
1110                 }
1111                 apply_fhc_ranges(central_bus->child,
1112                                  &zsregs[0], 1);
1113                 apply_central_ranges(central_bus, &zsregs[0], 1);
1114                 mapped_addr =
1115                         (((u64)zsregs[0].which_io)<<32UL) |
1116                         ((u64)zsregs[0].phys_addr);
1117         }
1118
1119         if (zilog_irq == -1) {
1120                 if (central_bus) {
1121                         unsigned long iclr, imap;
1122
1123                         iclr = central_bus->child->fhc_regs.uregs
1124                                 + FHC_UREGS_ICLR;
1125                         imap = central_bus->child->fhc_regs.uregs
1126                                 + FHC_UREGS_IMAP;
1127                         zilog_irq = build_irq(12, 0, iclr, imap);
1128                 } else {
1129                         err = prom_getproperty(zsnode, "interrupts",
1130                                                (char *) &sun4u_ino,
1131                                                sizeof(sun4u_ino));
1132                         zilog_irq = sbus_build_irq(sbus_root, sun4u_ino);
1133                 }
1134         }
1135
1136         return (struct zilog_layout __iomem *) mapped_addr;
1137 }
1138 #else /* CONFIG_SPARC64 */
1139
1140 /*
1141  * XXX The sun4d case is utterly screwed: it tries to re-walk the tree
1142  * (for the 3rd time) in order to find bootbus and cpu. Streamline it.
1143  */
1144 static struct zilog_layout __iomem * __init get_zs_sun4cmd(int chip, int node)
1145 {
1146         struct linux_prom_irqs irq_info[2];
1147         void __iomem *mapped_addr = NULL;
1148         int zsnode, cpunode, bbnode;
1149         struct linux_prom_registers zsreg[4];
1150         struct resource res;
1151
1152         if (sparc_cpu_model == sun4d) {
1153                 int walk;
1154
1155                 zsnode = 0;
1156                 bbnode = 0;
1157                 cpunode = 0;
1158                 for (walk = prom_getchild(prom_root_node);
1159                      (walk = prom_searchsiblings(walk, "cpu-unit")) != 0;
1160                      walk = prom_getsibling(walk)) {
1161                         bbnode = prom_getchild(walk);
1162                         if (bbnode &&
1163                             (bbnode = prom_searchsiblings(bbnode, "bootbus"))) {
1164                                 if ((zsnode = prom_getchild(bbnode)) == node) {
1165                                         cpunode = walk;
1166                                         break;
1167                                 }
1168                         }
1169                 }
1170                 if (!walk) {
1171                         prom_printf("SunZilog: Cannot find the %d'th bootbus on sun4d.\n",
1172                                     (chip / 2));
1173                         prom_halt();
1174                 }
1175
1176                 if (prom_getproperty(zsnode, "reg",
1177                                      (char *) zsreg, sizeof(zsreg)) == -1) {
1178                         prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
1179                         prom_halt();
1180                 }
1181                 /* XXX Looks like an off by one? */
1182                 prom_apply_generic_ranges(bbnode, cpunode, zsreg, 1);
1183                 res.start = zsreg[0].phys_addr;
1184                 res.end = res.start + (8 - 1);
1185                 res.flags = zsreg[0].which_io | IORESOURCE_IO;
1186                 mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
1187
1188         } else {
1189                 zsnode = node;
1190
1191 #if 0 /* XXX When was this used? */
1192                 if (prom_getintdefault(zsnode, "slave", -1) != chipid) {
1193                         zsnode = prom_getsibling(zsnode);
1194                         continue;
1195                 }
1196 #endif
1197
1198                 /*
1199                  * "address" is only present on ports that OBP opened
1200                  * (from Mitch Bradley's "Hitchhiker's Guide to OBP").
1201                  * We do not use it.
1202                  */
1203
1204                 if (prom_getproperty(zsnode, "reg",
1205                                      (char *) zsreg, sizeof(zsreg)) == -1) {
1206                         prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
1207                         prom_halt();
1208                 }
1209                 if (sparc_cpu_model == sun4m)   /* Crude. Pass parent. XXX */
1210                         prom_apply_obio_ranges(zsreg, 1);
1211                 res.start = zsreg[0].phys_addr;
1212                 res.end = res.start + (8 - 1);
1213                 res.flags = zsreg[0].which_io | IORESOURCE_IO;
1214                 mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
1215         }
1216
1217         if (prom_getproperty(zsnode, "intr",
1218                              (char *) irq_info, sizeof(irq_info))
1219                     % sizeof(struct linux_prom_irqs)) {
1220                 prom_printf("SunZilog: Cannot get IRQ property for Zilog %d.\n",
1221                             chip);
1222                 prom_halt();
1223         }
1224         if (zilog_irq == -1) {
1225                 zilog_irq = irq_info[0].pri;
1226         } else if (zilog_irq != irq_info[0].pri) {
1227                 /* XXX. Dumb. Should handle per-chip IRQ, for add-ons. */
1228                 prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
1229                             chip);
1230                 prom_halt();
1231         }
1232
1233         return (struct zilog_layout __iomem *) mapped_addr;
1234 }
1235 #endif /* !(CONFIG_SPARC64) */
1236
1237 /* Get the address of the registers for SunZilog instance CHIP.  */
1238 static struct zilog_layout __iomem * __init get_zs(int chip, int node)
1239 {
1240         if (chip < 0 || chip >= NUM_SUNZILOG) {
1241                 prom_printf("SunZilog: Illegal chip number %d in get_zs.\n", chip);
1242                 prom_halt();
1243         }
1244
1245 #ifdef CONFIG_SPARC64
1246         return get_zs_sun4u(chip, node);
1247 #else
1248
1249         if (sparc_cpu_model == sun4) {
1250                 struct resource res;
1251
1252                 /* Not probe-able, hard code it. */
1253                 switch (chip) {
1254                 case 0:
1255                         res.start = 0xf1000000;
1256                         break;
1257                 case 1:
1258                         res.start = 0xf0000000;
1259                         break;
1260                 };
1261                 zilog_irq = 12;
1262                 res.end = (res.start + (8 - 1));
1263                 res.flags = IORESOURCE_IO;
1264                 return sbus_ioremap(&res, 0, 8, "SunZilog");
1265         }
1266
1267         return get_zs_sun4cmd(chip, node);
1268 #endif
1269 }
1270
1271 #define ZS_PUT_CHAR_MAX_DELAY   2000    /* 10 ms */
1272
1273 static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch)
1274 {
1275         int loops = ZS_PUT_CHAR_MAX_DELAY;
1276
1277         /* This is a timed polling loop so do not switch the explicit
1278          * udelay with ZSDELAY as that is a NOP on some platforms.  -DaveM
1279          */
1280         do {
1281                 unsigned char val = sbus_readb(&channel->control);
1282                 if (val & Tx_BUF_EMP) {
1283                         ZSDELAY();
1284                         break;
1285                 }
1286                 udelay(5);
1287         } while (--loops);
1288
1289         sbus_writeb(ch, &channel->data);
1290         ZSDELAY();
1291         ZS_WSYNC(channel);
1292 }
1293
1294 #ifdef CONFIG_SERIO
1295
1296 static DEFINE_SPINLOCK(sunzilog_serio_lock);
1297
1298 static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
1299 {
1300         struct uart_sunzilog_port *up = serio->port_data;
1301         unsigned long flags;
1302
1303         spin_lock_irqsave(&sunzilog_serio_lock, flags);
1304
1305         sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch);
1306
1307         spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1308
1309         return 0;
1310 }
1311
1312 static int sunzilog_serio_open(struct serio *serio)
1313 {
1314         struct uart_sunzilog_port *up = serio->port_data;
1315         unsigned long flags;
1316         int ret;
1317
1318         spin_lock_irqsave(&sunzilog_serio_lock, flags);
1319         if (!up->serio_open) {
1320                 up->serio_open = 1;
1321                 ret = 0;
1322         } else
1323                 ret = -EBUSY;
1324         spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1325
1326         return ret;
1327 }
1328
1329 static void sunzilog_serio_close(struct serio *serio)
1330 {
1331         struct uart_sunzilog_port *up = serio->port_data;
1332         unsigned long flags;
1333
1334         spin_lock_irqsave(&sunzilog_serio_lock, flags);
1335         up->serio_open = 0;
1336         spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1337 }
1338
1339 #endif /* CONFIG_SERIO */
1340
1341 #ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
1342 static void
1343 sunzilog_console_write(struct console *con, const char *s, unsigned int count)
1344 {
1345         struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
1346         struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1347         unsigned long flags;
1348         int i;
1349
1350         spin_lock_irqsave(&up->port.lock, flags);
1351         for (i = 0; i < count; i++, s++) {
1352                 sunzilog_put_char(channel, *s);
1353                 if (*s == 10)
1354                         sunzilog_put_char(channel, 13);
1355         }
1356         udelay(2);
1357         spin_unlock_irqrestore(&up->port.lock, flags);
1358 }
1359
1360 static int __init sunzilog_console_setup(struct console *con, char *options)
1361 {
1362         struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
1363         unsigned long flags;
1364         int baud, brg;
1365
1366         printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
1367                (sunzilog_reg.minor - 64) + con->index, con->index);
1368
1369         /* Get firmware console settings.  */
1370         sunserial_console_termios(con);
1371
1372         /* Firmware console speed is limited to 150-->38400 baud so
1373          * this hackish cflag thing is OK.
1374          */
1375         switch (con->cflag & CBAUD) {
1376         case B150: baud = 150; break;
1377         case B300: baud = 300; break;
1378         case B600: baud = 600; break;
1379         case B1200: baud = 1200; break;
1380         case B2400: baud = 2400; break;
1381         case B4800: baud = 4800; break;
1382         default: case B9600: baud = 9600; break;
1383         case B19200: baud = 19200; break;
1384         case B38400: baud = 38400; break;
1385         };
1386
1387         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1388
1389         spin_lock_irqsave(&up->port.lock, flags);
1390
1391         up->curregs[R15] = BRKIE;
1392         sunzilog_convert_to_zs(up, con->cflag, 0, brg);
1393
1394         sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
1395         __sunzilog_startup(up);
1396
1397         spin_unlock_irqrestore(&up->port.lock, flags);
1398
1399         return 0;
1400 }
1401
1402 static struct console sunzilog_console = {
1403         .name   =       "ttyS",
1404         .write  =       sunzilog_console_write,
1405         .device =       uart_console_device,
1406         .setup  =       sunzilog_console_setup,
1407         .flags  =       CON_PRINTBUFFER,
1408         .index  =       -1,
1409         .data   =       &sunzilog_reg,
1410 };
1411 #define SUNZILOG_CONSOLE        (&sunzilog_console)
1412
1413 static int __init sunzilog_console_init(void)
1414 {
1415         int i;
1416
1417         if (con_is_present())
1418                 return 0;
1419
1420         for (i = 0; i < NUM_CHANNELS; i++) {
1421                 int this_minor = sunzilog_reg.minor + i;
1422
1423                 if ((this_minor - 64) == (serial_console - 1))
1424                         break;
1425         }
1426         if (i == NUM_CHANNELS)
1427                 return 0;
1428
1429         sunzilog_console.index = i;
1430         sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
1431         register_console(&sunzilog_console);
1432         return 0;
1433 }
1434 #else
1435 #define SUNZILOG_CONSOLE        (NULL)
1436 #define sunzilog_console_init() do { } while (0)
1437 #endif
1438
1439 /*
1440  * We scan the PROM tree recursively. This is the most reliable way
1441  * to find Zilog nodes on various platforms. However, we face an extreme
1442  * shortage of kernel stack, so we must be very careful. To that end,
1443  * we scan only to a certain depth, and we use a common property buffer
1444  * in the scan structure.
1445  */
1446 #define ZS_PROPSIZE  128
1447 #define ZS_SCAN_DEPTH   5
1448
1449 struct zs_probe_scan {
1450         int depth;
1451         void (*scanner)(struct zs_probe_scan *t, int node);
1452
1453         int devices;
1454         char prop[ZS_PROPSIZE];
1455 };
1456
1457 static int __inline__ sunzilog_node_ok(int node, const char *name, int len)
1458 {
1459         if (strncmp(name, "zs", len) == 0)
1460                 return 1;
1461         /* Don't fold this procedure just yet. Compare to su_node_ok(). */
1462         return 0;
1463 }
1464
1465 static void __init sunzilog_scan(struct zs_probe_scan *t, int node)
1466 {
1467         int len;
1468
1469         for (; node != 0; node = prom_getsibling(node)) {
1470                 len = prom_getproperty(node, "name", t->prop, ZS_PROPSIZE);
1471                 if (len <= 1)
1472                         continue;               /* Broken PROM node */
1473                 if (sunzilog_node_ok(node, t->prop, len)) {
1474                         (*t->scanner)(t, node);
1475                 } else {
1476                         if (t->depth < ZS_SCAN_DEPTH) {
1477                                 t->depth++;
1478                                 sunzilog_scan(t, prom_getchild(node));
1479                                 --t->depth;
1480                         }
1481                 }
1482         }
1483 }
1484
1485 static void __init sunzilog_prepare(void)
1486 {
1487         struct uart_sunzilog_port *up;
1488         struct zilog_layout __iomem *rp;
1489         int channel, chip;
1490
1491         /*
1492          * Temporary fix.
1493          */
1494         for (channel = 0; channel < NUM_CHANNELS; channel++)
1495                 spin_lock_init(&sunzilog_port_table[channel].port.lock);
1496
1497         sunzilog_irq_chain = up = &sunzilog_port_table[0];
1498         for (channel = 0; channel < NUM_CHANNELS - 1; channel++)
1499                 up[channel].next = &up[channel + 1];
1500         up[channel].next = NULL;
1501
1502         for (chip = 0; chip < NUM_SUNZILOG; chip++) {
1503                 rp = sunzilog_chip_regs[chip];
1504                 up[(chip * 2) + 0].port.membase = (void __iomem *)&rp->channelA;
1505                 up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
1506
1507                 /* Channel A */
1508                 up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
1509                 up[(chip * 2) + 0].port.irq = zilog_irq;
1510                 up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
1511                 up[(chip * 2) + 0].port.fifosize = 1;
1512                 up[(chip * 2) + 0].port.ops = &sunzilog_pops;
1513                 up[(chip * 2) + 0].port.type = PORT_SUNZILOG;
1514                 up[(chip * 2) + 0].port.flags = 0;
1515                 up[(chip * 2) + 0].port.line = (chip * 2) + 0;
1516                 up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
1517
1518                 /* Channel B */
1519                 up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
1520                 up[(chip * 2) + 1].port.irq = zilog_irq;
1521                 up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
1522                 up[(chip * 2) + 1].port.fifosize = 1;
1523                 up[(chip * 2) + 1].port.ops = &sunzilog_pops;
1524                 up[(chip * 2) + 1].port.type = PORT_SUNZILOG;
1525                 up[(chip * 2) + 1].port.flags = 0;
1526                 up[(chip * 2) + 1].port.line = (chip * 2) + 1;
1527                 up[(chip * 2) + 1].flags |= 0;
1528         }
1529 }
1530
1531 static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
1532 {
1533         int baud, brg;
1534
1535         if (channel == KEYBOARD_LINE) {
1536                 up->flags |= SUNZILOG_FLAG_CONS_KEYB;
1537                 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1538                 baud = 1200;
1539         } else {
1540                 up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
1541                 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1542                 baud = 4800;
1543         }
1544         printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n",
1545                channel, up->port.membase, __irq_itoa(zilog_irq));
1546
1547         up->curregs[R15] = BRKIE;
1548         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1549         sunzilog_convert_to_zs(up, up->cflag, 0, brg);
1550         sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
1551         __sunzilog_startup(up);
1552 }
1553
1554 #ifdef CONFIG_SERIO
1555 static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
1556 {
1557         struct serio *serio;
1558
1559         up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
1560         if (serio) {
1561                 memset(serio, 0, sizeof(*serio));
1562
1563                 serio->port_data = up;
1564
1565                 serio->id.type = SERIO_RS232;
1566                 if (channel == KEYBOARD_LINE) {
1567                         serio->id.proto = SERIO_SUNKBD;
1568                         strlcpy(serio->name, "zskbd", sizeof(serio->name));
1569                 } else {
1570                         serio->id.proto = SERIO_SUN;
1571                         serio->id.extra = 1;
1572                         strlcpy(serio->name, "zsms", sizeof(serio->name));
1573                 }
1574                 strlcpy(serio->phys,
1575                         (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
1576                         sizeof(serio->phys));
1577
1578                 serio->write = sunzilog_serio_write;
1579                 serio->open = sunzilog_serio_open;
1580                 serio->close = sunzilog_serio_close;
1581
1582                 serio_register_port(serio);
1583         } else {
1584                 printk(KERN_WARNING "zs%d: not enough memory for serio port\n",
1585                         channel);
1586         }
1587 }
1588 #endif
1589
1590 static void __init sunzilog_init_hw(void)
1591 {
1592         int i;
1593
1594         for (i = 0; i < NUM_CHANNELS; i++) {
1595                 struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1596                 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1597                 unsigned long flags;
1598                 int baud, brg;
1599
1600                 spin_lock_irqsave(&up->port.lock, flags);
1601
1602                 if (ZS_IS_CHANNEL_A(up)) {
1603                         write_zsreg(channel, R9, FHWRES);
1604                         ZSDELAY_LONG();
1605                         (void) read_zsreg(channel, R0);
1606                 }
1607
1608                 if (i == KEYBOARD_LINE || i == MOUSE_LINE) {
1609                         sunzilog_init_kbdms(up, i);
1610                         up->curregs[R9] |= (NV | MIE);
1611                         write_zsreg(channel, R9, up->curregs[R9]);
1612                 } else {
1613                         /* Normal serial TTY. */
1614                         up->parity_mask = 0xff;
1615                         up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
1616                         up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
1617                         up->curregs[R3] = RxENAB | Rx8;
1618                         up->curregs[R5] = TxENAB | Tx8;
1619                         up->curregs[R9] = NV | MIE;
1620                         up->curregs[R10] = NRZ;
1621                         up->curregs[R11] = TCBR | RCBR;
1622                         baud = 9600;
1623                         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1624                         up->curregs[R12] = (brg & 0xff);
1625                         up->curregs[R13] = (brg >> 8) & 0xff;
1626                         up->curregs[R14] = BRSRC | BRENAB;
1627                         __load_zsregs(channel, up->curregs);
1628                         write_zsreg(channel, R9, up->curregs[R9]);
1629                 }
1630
1631                 spin_unlock_irqrestore(&up->port.lock, flags);
1632
1633 #ifdef CONFIG_SERIO
1634                 if (i == KEYBOARD_LINE || i == MOUSE_LINE)
1635                         sunzilog_register_serio(up, i);
1636 #endif
1637         }
1638 }
1639
1640 static struct zilog_layout __iomem * __init get_zs(int chip, int node);
1641
1642 static void __init sunzilog_scan_probe(struct zs_probe_scan *t, int node)
1643 {
1644         sunzilog_chip_regs[t->devices] = get_zs(t->devices, node);
1645         t->devices++;
1646 }
1647
1648 static int __init sunzilog_ports_init(void)
1649 {
1650         struct zs_probe_scan scan;
1651         int ret;
1652         int uart_count;
1653         int i;
1654
1655         printk(KERN_DEBUG "SunZilog: %d chips.\n", NUM_SUNZILOG);
1656
1657         scan.scanner = sunzilog_scan_probe;
1658         scan.depth = 0;
1659         scan.devices = 0;
1660         sunzilog_scan(&scan, prom_getchild(prom_root_node));
1661
1662         sunzilog_prepare();
1663
1664         if (request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
1665                         "SunZilog", sunzilog_irq_chain)) {
1666                 prom_printf("SunZilog: Unable to register zs interrupt handler.\n");
1667                 prom_halt();
1668         }
1669
1670         sunzilog_init_hw();
1671
1672         /* We can only init this once we have probed the Zilogs
1673          * in the system. Do not count channels assigned to keyboards
1674          * or mice when we are deciding how many ports to register.
1675          */
1676         uart_count = 0;
1677         for (i = 0; i < NUM_CHANNELS; i++) {
1678                 struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1679
1680                 if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
1681                         continue;
1682
1683                 uart_count++;
1684         }
1685
1686         sunzilog_reg.nr = uart_count;
1687         sunzilog_reg.cons = SUNZILOG_CONSOLE;
1688
1689         sunzilog_reg.minor = sunserial_current_minor;
1690         sunserial_current_minor += uart_count;
1691
1692         ret = uart_register_driver(&sunzilog_reg);
1693         if (ret == 0) {
1694                 sunzilog_console_init();
1695                 for (i = 0; i < NUM_CHANNELS; i++) {
1696                         struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1697
1698                         if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
1699                                 continue;
1700
1701                         if (uart_add_one_port(&sunzilog_reg, &up->port)) {
1702                                 printk(KERN_ERR
1703                                     "SunZilog: failed to add port zs%d\n", i);
1704                         }
1705                 }
1706         }
1707
1708         return ret;
1709 }
1710
1711 static void __init sunzilog_scan_count(struct zs_probe_scan *t, int node)
1712 {
1713         t->devices++;
1714 }
1715
1716 static int __init sunzilog_ports_count(void)
1717 {
1718         struct zs_probe_scan scan;
1719
1720         /* Sun4 Zilog setup is hard coded, no probing to do.  */
1721         if (sparc_cpu_model == sun4)
1722                 return 2;
1723
1724         scan.scanner = sunzilog_scan_count;
1725         scan.depth = 0;
1726         scan.devices = 0;
1727
1728         sunzilog_scan(&scan, prom_getchild(prom_root_node));
1729
1730         return scan.devices;
1731 }
1732
1733 static int __init sunzilog_init(void)
1734 {
1735
1736         NUM_SUNZILOG = sunzilog_ports_count();
1737         if (NUM_SUNZILOG == 0)
1738                 return -ENODEV;
1739
1740         sunzilog_alloc_tables();
1741
1742         sunzilog_ports_init();
1743
1744         return 0;
1745 }
1746
1747 static void __exit sunzilog_exit(void)
1748 {
1749         int i;
1750
1751         for (i = 0; i < NUM_CHANNELS; i++) {
1752                 struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1753
1754                 if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
1755 #ifdef CONFIG_SERIO
1756                         if (up->serio) {
1757                                 serio_unregister_port(up->serio);
1758                                 up->serio = NULL;
1759                         }
1760 #endif
1761                 } else
1762                         uart_remove_one_port(&sunzilog_reg, &up->port);
1763         }
1764
1765         uart_unregister_driver(&sunzilog_reg);
1766 }
1767
1768 module_init(sunzilog_init);
1769 module_exit(sunzilog_exit);
1770
1771 MODULE_AUTHOR("David S. Miller");
1772 MODULE_DESCRIPTION("Sun Zilog serial port driver");
1773 MODULE_LICENSE("GPL");