git.oblomov.eu Git - linux-2.6/blob - drivers/usb/gadget/serial.c

   1 /*
   2  * g_serial.c -- USB gadget serial driver
   3  *
   4  * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
   5  *
   6  * This code is based in part on the Gadget Zero driver, which
   7  * is Copyright (C) 2003 by David Brownell, all rights reserved.
   8  *
   9  * This code also borrows from usbserial.c, which is
  10  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
  11  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  12  * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
  13  *
  14  * This software is distributed under the terms of the GNU General
  15  * Public License ("GPL") as published by the Free Software Foundation,
  16  * either version 2 of that License or (at your option) any later version.
  17  *
  18  */
  19
  20 #include <linux/config.h>
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/delay.h>
  24 #include <linux/ioport.h>
  25 #include <linux/sched.h>
  26 #include <linux/slab.h>
  27 #include <linux/smp_lock.h>
  28 #include <linux/errno.h>
  29 #include <linux/init.h>
  30 #include <linux/timer.h>
  31 #include <linux/list.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/utsname.h>
  34 #include <linux/wait.h>
  35 #include <linux/proc_fs.h>
  36 #include <linux/device.h>
  37 #include <linux/tty.h>
  38 #include <linux/tty_flip.h>
  39
  40 #include <asm/byteorder.h>
  41 #include <asm/io.h>
  42 #include <asm/irq.h>
  43 #include <asm/system.h>
  44 #include <asm/unaligned.h>
  45 #include <asm/uaccess.h>
  46
  47 #include <linux/usb_ch9.h>
  48 #include <linux/usb_cdc.h>
  49 #include <linux/usb_gadget.h>
  50
  51 #include "gadget_chips.h"
  52
  53
  54 /* Wait Cond */
  55
  56 #define __wait_cond_interruptible(wq, condition, lock, flags, ret)      \
  57 do {                                                                    \
  58         wait_queue_t __wait;                                            \
  59         init_waitqueue_entry(&__wait, current);                         \
  60                                                                         \
  61         add_wait_queue(&wq, &__wait);                                   \
  62         for (;;) {                                                      \
  63                 set_current_state(TASK_INTERRUPTIBLE);                  \
  64                 if (condition)                                          \
  65                         break;                                          \
  66                 if (!signal_pending(current)) {                         \
  67                         spin_unlock_irqrestore(lock, flags);            \
  68                         schedule();                                     \
  69                         spin_lock_irqsave(lock, flags);                 \
  70                         continue;                                       \
  71                 }                                                       \
  72                 ret = -ERESTARTSYS;                                     \
  73                 break;                                                  \
  74         }                                                               \
  75         current->state = TASK_RUNNING;                                  \
  76         remove_wait_queue(&wq, &__wait);                                \
  77 } while (0)
  78
  79 #define wait_cond_interruptible(wq, condition, lock, flags)             \
  80 ({                                                                      \
  81         int __ret = 0;                                                  \
  82         if (!(condition))                                               \
  83                 __wait_cond_interruptible(wq, condition, lock, flags,   \
  84                                                 __ret);                 \
  85         __ret;                                                          \
  86 })
  87
  88 #define __wait_cond_interruptible_timeout(wq, condition, lock, flags,   \
  89                                                 timeout, ret)           \
  90 do {                                                                    \
  91         signed long __timeout = timeout;                                \
  92         wait_queue_t __wait;                                            \
  93         init_waitqueue_entry(&__wait, current);                         \
  94                                                                         \
  95         add_wait_queue(&wq, &__wait);                                   \
  96         for (;;) {                                                      \
  97                 set_current_state(TASK_INTERRUPTIBLE);                  \
  98                 if (__timeout == 0)                                     \
  99                         break;                                          \
 100                 if (condition)                                          \
 101                         break;                                          \
 102                 if (!signal_pending(current)) {                         \
 103                         spin_unlock_irqrestore(lock, flags);            \
 104                         __timeout = schedule_timeout(__timeout);        \
 105                         spin_lock_irqsave(lock, flags);                 \
 106                         continue;                                       \
 107                 }                                                       \
 108                 ret = -ERESTARTSYS;                                     \
 109                 break;                                                  \
 110         }                                                               \
 111         current->state = TASK_RUNNING;                                  \
 112         remove_wait_queue(&wq, &__wait);                                \
 113 } while (0)
 114
 115 #define wait_cond_interruptible_timeout(wq, condition, lock, flags,     \
 116                                                 timeout)                \
 117 ({                                                                      \
 118         int __ret = 0;                                                  \
 119         if (!(condition))                                               \
 120                 __wait_cond_interruptible_timeout(wq, condition, lock,  \
 121                                                 flags, timeout, __ret); \
 122         __ret;                                                          \
 123 })
 124
 125
 126 /* Defines */
 127
 128 #define GS_VERSION_STR                  "v2.0"
 129 #define GS_VERSION_NUM                  0x0200
 130
 131 #define GS_LONG_NAME                    "Gadget Serial"
 132 #define GS_SHORT_NAME                   "g_serial"
 133
 134 #define GS_MAJOR                        127
 135 #define GS_MINOR_START                  0
 136
 137 #define GS_NUM_PORTS                    16
 138
 139 #define GS_NUM_CONFIGS                  1
 140 #define GS_NO_CONFIG_ID                 0
 141 #define GS_BULK_CONFIG_ID               1
 142 #define GS_ACM_CONFIG_ID                2
 143
 144 #define GS_MAX_NUM_INTERFACES           2
 145 #define GS_BULK_INTERFACE_ID            0
 146 #define GS_CONTROL_INTERFACE_ID         0
 147 #define GS_DATA_INTERFACE_ID            1
 148
 149 #define GS_MAX_DESC_LEN                 256
 150
 151 #define GS_DEFAULT_READ_Q_SIZE          32
 152 #define GS_DEFAULT_WRITE_Q_SIZE         32
 153
 154 #define GS_DEFAULT_WRITE_BUF_SIZE       8192
 155 #define GS_TMP_BUF_SIZE                 8192
 156
 157 #define GS_CLOSE_TIMEOUT                15
 158
 159 #define GS_DEFAULT_USE_ACM              0
 160
 161 #define GS_DEFAULT_DTE_RATE             9600
 162 #define GS_DEFAULT_DATA_BITS            8
 163 #define GS_DEFAULT_PARITY               USB_CDC_NO_PARITY
 164 #define GS_DEFAULT_CHAR_FORMAT          USB_CDC_1_STOP_BITS
 165
 166 /* select highspeed/fullspeed, hiding highspeed if not configured */
 167 #ifdef CONFIG_USB_GADGET_DUALSPEED
 168 #define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
 169 #else
 170 #define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
 171 #endif /* CONFIG_USB_GADGET_DUALSPEED */
 172
 173 /* debug settings */
 174 #ifdef GS_DEBUG
 175 static int debug = 1;
 176
 177 #define gs_debug(format, arg...) \
 178         do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
 179 #define gs_debug_level(level, format, arg...) \
 180         do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
 181
 182 #else
 183
 184 #define gs_debug(format, arg...) \
 185         do { } while(0)
 186 #define gs_debug_level(level, format, arg...) \
 187         do { } while(0)
 188
 189 #endif /* GS_DEBUG */
 190
 191 /* Thanks to NetChip Technologies for donating this product ID.
 192  *
 193  * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
 194  * Instead:  allocate your own, using normal USB-IF procedures.
 195  */
 196 #define GS_VENDOR_ID                    0x0525  /* NetChip */
 197 #define GS_PRODUCT_ID                   0xa4a6  /* Linux-USB Serial Gadget */
 198 #define GS_CDC_PRODUCT_ID               0xa4a7  /* ... as CDC-ACM */
 199
 200 #define GS_LOG2_NOTIFY_INTERVAL         5       /* 1 << 5 == 32 msec */
 201 #define GS_NOTIFY_MAXPACKET             8
 202
 203
 204 /* Structures */
 205
 206 struct gs_dev;
 207
 208 /* circular buffer */
 209 struct gs_buf {
 210         unsigned int            buf_size;
 211         char                    *buf_buf;
 212         char                    *buf_get;
 213         char                    *buf_put;
 214 };
 215
 216 /* list of requests */
 217 struct gs_req_entry {
 218         struct list_head        re_entry;
 219         struct usb_request      *re_req;
 220 };
 221
 222 /* the port structure holds info for each port, one for each minor number */
 223 struct gs_port {
 224         struct gs_dev           *port_dev;      /* pointer to device struct */
 225         struct tty_struct       *port_tty;      /* pointer to tty struct */
 226         spinlock_t              port_lock;
 227         int                     port_num;
 228         int                     port_open_count;
 229         int                     port_in_use;    /* open/close in progress */
 230         wait_queue_head_t       port_write_wait;/* waiting to write */
 231         struct gs_buf           *port_write_buf;
 232         struct usb_cdc_line_coding      port_line_coding;
 233 };
 234
 235 /* the device structure holds info for the USB device */
 236 struct gs_dev {
 237         struct usb_gadget       *dev_gadget;    /* gadget device pointer */
 238         spinlock_t              dev_lock;       /* lock for set/reset config */
 239         int                     dev_config;     /* configuration number */
 240         struct usb_ep           *dev_notify_ep; /* address of notify endpoint */
 241         struct usb_ep           *dev_in_ep;     /* address of in endpoint */
 242         struct usb_ep           *dev_out_ep;    /* address of out endpoint */
 243         struct usb_endpoint_descriptor          /* descriptor of notify ep */
 244                                 *dev_notify_ep_desc;
 245         struct usb_endpoint_descriptor          /* descriptor of in endpoint */
 246                                 *dev_in_ep_desc;
 247         struct usb_endpoint_descriptor          /* descriptor of out endpoint */
 248                                 *dev_out_ep_desc;
 249         struct usb_request      *dev_ctrl_req;  /* control request */
 250         struct list_head        dev_req_list;   /* list of write requests */
 251         int                     dev_sched_port; /* round robin port scheduled */
 252         struct gs_port          *dev_port[GS_NUM_PORTS]; /* the ports */
 253 };
 254
 255
 256 /* Functions */
 257
 258 /* module */
 259 static int __init gs_module_init(void);
 260 static void __exit gs_module_exit(void);
 261
 262 /* tty driver */
 263 static int gs_open(struct tty_struct *tty, struct file *file);
 264 static void gs_close(struct tty_struct *tty, struct file *file);
 265 static int gs_write(struct tty_struct *tty,
 266         const unsigned char *buf, int count);
 267 static void gs_put_char(struct tty_struct *tty, unsigned char ch);
 268 static void gs_flush_chars(struct tty_struct *tty);
 269 static int gs_write_room(struct tty_struct *tty);
 270 static int gs_chars_in_buffer(struct tty_struct *tty);
 271 static void gs_throttle(struct tty_struct * tty);
 272 static void gs_unthrottle(struct tty_struct * tty);
 273 static void gs_break(struct tty_struct *tty, int break_state);
 274 static int  gs_ioctl(struct tty_struct *tty, struct file *file,
 275         unsigned int cmd, unsigned long arg);
 276 static void gs_set_termios(struct tty_struct *tty, struct termios *old);
 277
 278 static int gs_send(struct gs_dev *dev);
 279 static int gs_send_packet(struct gs_dev *dev, char *packet,
 280         unsigned int size);
 281 static int gs_recv_packet(struct gs_dev *dev, char *packet,
 282         unsigned int size);
 283 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
 284 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
 285
 286 /* gadget driver */
 287 static int gs_bind(struct usb_gadget *gadget);
 288 static void gs_unbind(struct usb_gadget *gadget);
 289 static int gs_setup(struct usb_gadget *gadget,
 290         const struct usb_ctrlrequest *ctrl);
 291 static int gs_setup_standard(struct usb_gadget *gadget,
 292         const struct usb_ctrlrequest *ctrl);
 293 static int gs_setup_class(struct usb_gadget *gadget,
 294         const struct usb_ctrlrequest *ctrl);
 295 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
 296 static void gs_disconnect(struct usb_gadget *gadget);
 297 static int gs_set_config(struct gs_dev *dev, unsigned config);
 298 static void gs_reset_config(struct gs_dev *dev);
 299 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
 300                 u8 type, unsigned int index, int is_otg);
 301
 302 static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
 303         gfp_t kmalloc_flags);
 304 static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
 305
 306 static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
 307         gfp_t kmalloc_flags);
 308 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
 309
 310 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
 311 static void gs_free_ports(struct gs_dev *dev);
 312
 313 /* circular buffer */
 314 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
 315 static void gs_buf_free(struct gs_buf *gb);
 316 static void gs_buf_clear(struct gs_buf *gb);
 317 static unsigned int gs_buf_data_avail(struct gs_buf *gb);
 318 static unsigned int gs_buf_space_avail(struct gs_buf *gb);
 319 static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
 320         unsigned int count);
 321 static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
 322         unsigned int count);
 323
 324 /* external functions */
 325 extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
 326
 327
 328 /* Globals */
 329
 330 static struct gs_dev *gs_device;
 331
 332 static const char *EP_IN_NAME;
 333 static const char *EP_OUT_NAME;
 334 static const char *EP_NOTIFY_NAME;
 335
 336 static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
 337
 338 static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
 339 static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
 340
 341 static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
 342
 343 static unsigned int use_acm = GS_DEFAULT_USE_ACM;
 344
 345
 346 /* tty driver struct */
 347 static struct tty_operations gs_tty_ops = {
 348         .open =                 gs_open,
 349         .close =                gs_close,
 350         .write =                gs_write,
 351         .put_char =             gs_put_char,
 352         .flush_chars =          gs_flush_chars,
 353         .write_room =           gs_write_room,
 354         .ioctl =                gs_ioctl,
 355         .set_termios =          gs_set_termios,
 356         .throttle =             gs_throttle,
 357         .unthrottle =           gs_unthrottle,
 358         .break_ctl =            gs_break,
 359         .chars_in_buffer =      gs_chars_in_buffer,
 360 };
 361 static struct tty_driver *gs_tty_driver;
 362
 363 /* gadget driver struct */
 364 static struct usb_gadget_driver gs_gadget_driver = {
 365 #ifdef CONFIG_USB_GADGET_DUALSPEED
 366         .speed =                USB_SPEED_HIGH,
 367 #else
 368         .speed =                USB_SPEED_FULL,
 369 #endif /* CONFIG_USB_GADGET_DUALSPEED */
 370         .function =             GS_LONG_NAME,
 371         .bind =                 gs_bind,
 372         .unbind =               gs_unbind,
 373         .setup =                gs_setup,
 374         .disconnect =           gs_disconnect,
 375         .driver = {
 376                 .name =         GS_SHORT_NAME,
 377                 /* .shutdown = ... */
 378                 /* .suspend = ...  */
 379                 /* .resume = ...   */
 380         },
 381 };
 382
 383
 384 /* USB descriptors */
 385
 386 #define GS_MANUFACTURER_STR_ID  1
 387 #define GS_PRODUCT_STR_ID       2
 388 #define GS_SERIAL_STR_ID        3
 389 #define GS_BULK_CONFIG_STR_ID   4
 390 #define GS_ACM_CONFIG_STR_ID    5
 391 #define GS_CONTROL_STR_ID       6
 392 #define GS_DATA_STR_ID          7
 393
 394 /* static strings, in UTF-8 */
 395 static char manufacturer[50];
 396 static struct usb_string gs_strings[] = {
 397         { GS_MANUFACTURER_STR_ID, manufacturer },
 398         { GS_PRODUCT_STR_ID, GS_LONG_NAME },
 399         { GS_SERIAL_STR_ID, "0" },
 400         { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
 401         { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
 402         { GS_CONTROL_STR_ID, "Gadget Serial Control" },
 403         { GS_DATA_STR_ID, "Gadget Serial Data" },
 404         {  } /* end of list */
 405 };
 406
 407 static struct usb_gadget_strings gs_string_table = {
 408         .language =             0x0409, /* en-us */
 409         .strings =              gs_strings,
 410 };
 411
 412 static struct usb_device_descriptor gs_device_desc = {
 413         .bLength =              USB_DT_DEVICE_SIZE,
 414         .bDescriptorType =      USB_DT_DEVICE,
 415         .bcdUSB =               __constant_cpu_to_le16(0x0200),
 416         .bDeviceSubClass =      0,
 417         .bDeviceProtocol =      0,
 418         .idVendor =             __constant_cpu_to_le16(GS_VENDOR_ID),
 419         .idProduct =            __constant_cpu_to_le16(GS_PRODUCT_ID),
 420         .iManufacturer =        GS_MANUFACTURER_STR_ID,
 421         .iProduct =             GS_PRODUCT_STR_ID,
 422         .iSerialNumber =        GS_SERIAL_STR_ID,
 423         .bNumConfigurations =   GS_NUM_CONFIGS,
 424 };
 425
 426 static struct usb_otg_descriptor gs_otg_descriptor = {
 427         .bLength =              sizeof(gs_otg_descriptor),
 428         .bDescriptorType =      USB_DT_OTG,
 429         .bmAttributes =         USB_OTG_SRP,
 430 };
 431
 432 static struct usb_config_descriptor gs_bulk_config_desc = {
 433         .bLength =              USB_DT_CONFIG_SIZE,
 434         .bDescriptorType =      USB_DT_CONFIG,
 435         /* .wTotalLength computed dynamically */
 436         .bNumInterfaces =       1,
 437         .bConfigurationValue =  GS_BULK_CONFIG_ID,
 438         .iConfiguration =       GS_BULK_CONFIG_STR_ID,
 439         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 440         .bMaxPower =            1,
 441 };
 442
 443 static struct usb_config_descriptor gs_acm_config_desc = {
 444         .bLength =              USB_DT_CONFIG_SIZE,
 445         .bDescriptorType =      USB_DT_CONFIG,
 446         /* .wTotalLength computed dynamically */
 447         .bNumInterfaces =       2,
 448         .bConfigurationValue =  GS_ACM_CONFIG_ID,
 449         .iConfiguration =       GS_ACM_CONFIG_STR_ID,
 450         .bmAttributes =         USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 451         .bMaxPower =            1,
 452 };
 453
 454 static const struct usb_interface_descriptor gs_bulk_interface_desc = {
 455         .bLength =              USB_DT_INTERFACE_SIZE,
 456         .bDescriptorType =      USB_DT_INTERFACE,
 457         .bInterfaceNumber =     GS_BULK_INTERFACE_ID,
 458         .bNumEndpoints =        2,
 459         .bInterfaceClass =      USB_CLASS_CDC_DATA,
 460         .bInterfaceSubClass =   0,
 461         .bInterfaceProtocol =   0,
 462         .iInterface =           GS_DATA_STR_ID,
 463 };
 464
 465 static const struct usb_interface_descriptor gs_control_interface_desc = {
 466         .bLength =              USB_DT_INTERFACE_SIZE,
 467         .bDescriptorType =      USB_DT_INTERFACE,
 468         .bInterfaceNumber =     GS_CONTROL_INTERFACE_ID,
 469         .bNumEndpoints =        1,
 470         .bInterfaceClass =      USB_CLASS_COMM,
 471         .bInterfaceSubClass =   USB_CDC_SUBCLASS_ACM,
 472         .bInterfaceProtocol =   USB_CDC_ACM_PROTO_AT_V25TER,
 473         .iInterface =           GS_CONTROL_STR_ID,
 474 };
 475
 476 static const struct usb_interface_descriptor gs_data_interface_desc = {
 477         .bLength =              USB_DT_INTERFACE_SIZE,
 478         .bDescriptorType =      USB_DT_INTERFACE,
 479         .bInterfaceNumber =     GS_DATA_INTERFACE_ID,
 480         .bNumEndpoints =        2,
 481         .bInterfaceClass =      USB_CLASS_CDC_DATA,
 482         .bInterfaceSubClass =   0,
 483         .bInterfaceProtocol =   0,
 484         .iInterface =           GS_DATA_STR_ID,
 485 };
 486
 487 static const struct usb_cdc_header_desc gs_header_desc = {
 488         .bLength =              sizeof(gs_header_desc),
 489         .bDescriptorType =      USB_DT_CS_INTERFACE,
 490         .bDescriptorSubType =   USB_CDC_HEADER_TYPE,
 491         .bcdCDC =               __constant_cpu_to_le16(0x0110),
 492 };
 493
 494 static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
 495         .bLength =              sizeof(gs_call_mgmt_descriptor),
 496         .bDescriptorType =      USB_DT_CS_INTERFACE,
 497         .bDescriptorSubType =   USB_CDC_CALL_MANAGEMENT_TYPE,
 498         .bmCapabilities =       0,
 499         .bDataInterface =       1,      /* index of data interface */
 500 };
 501
 502 static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
 503         .bLength =              sizeof(gs_acm_descriptor),
 504         .bDescriptorType =      USB_DT_CS_INTERFACE,
 505         .bDescriptorSubType =   USB_CDC_ACM_TYPE,
 506         .bmCapabilities =       0,
 507 };
 508
 509 static const struct usb_cdc_union_desc gs_union_desc = {
 510         .bLength =              sizeof(gs_union_desc),
 511         .bDescriptorType =      USB_DT_CS_INTERFACE,
 512         .bDescriptorSubType =   USB_CDC_UNION_TYPE,
 513         .bMasterInterface0 =    0,      /* index of control interface */
 514         .bSlaveInterface0 =     1,      /* index of data interface */
 515 };
 516
 517 static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
 518         .bLength =              USB_DT_ENDPOINT_SIZE,
 519         .bDescriptorType =      USB_DT_ENDPOINT,
 520         .bEndpointAddress =     USB_DIR_IN,
 521         .bmAttributes =         USB_ENDPOINT_XFER_INT,
 522         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
 523         .bInterval =            1 << GS_LOG2_NOTIFY_INTERVAL,
 524 };
 525
 526 static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
 527         .bLength =              USB_DT_ENDPOINT_SIZE,
 528         .bDescriptorType =      USB_DT_ENDPOINT,
 529         .bEndpointAddress =     USB_DIR_IN,
 530         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 531 };
 532
 533 static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
 534         .bLength =              USB_DT_ENDPOINT_SIZE,
 535         .bDescriptorType =      USB_DT_ENDPOINT,
 536         .bEndpointAddress =     USB_DIR_OUT,
 537         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 538 };
 539
 540 static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
 541         (struct usb_descriptor_header *) &gs_otg_descriptor,
 542         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
 543         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
 544         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
 545         NULL,
 546 };
 547
 548 static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
 549         (struct usb_descriptor_header *) &gs_otg_descriptor,
 550         (struct usb_descriptor_header *) &gs_control_interface_desc,
 551         (struct usb_descriptor_header *) &gs_header_desc,
 552         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
 553         (struct usb_descriptor_header *) &gs_acm_descriptor,
 554         (struct usb_descriptor_header *) &gs_union_desc,
 555         (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
 556         (struct usb_descriptor_header *) &gs_data_interface_desc,
 557         (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
 558         (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
 559         NULL,
 560 };
 561
 562 #ifdef CONFIG_USB_GADGET_DUALSPEED
 563 static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
 564         .bLength =              USB_DT_ENDPOINT_SIZE,
 565         .bDescriptorType =      USB_DT_ENDPOINT,
 566         .bEndpointAddress =     USB_DIR_IN,
 567         .bmAttributes =         USB_ENDPOINT_XFER_INT,
 568         .wMaxPacketSize =       __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
 569         .bInterval =            GS_LOG2_NOTIFY_INTERVAL+4,
 570 };
 571
 572 static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
 573         .bLength =              USB_DT_ENDPOINT_SIZE,
 574         .bDescriptorType =      USB_DT_ENDPOINT,
 575         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 576         .wMaxPacketSize =       __constant_cpu_to_le16(512),
 577 };
 578
 579 static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
 580         .bLength =              USB_DT_ENDPOINT_SIZE,
 581         .bDescriptorType =      USB_DT_ENDPOINT,
 582         .bmAttributes =         USB_ENDPOINT_XFER_BULK,
 583         .wMaxPacketSize =       __constant_cpu_to_le16(512),
 584 };
 585
 586 static struct usb_qualifier_descriptor gs_qualifier_desc = {
 587         .bLength =              sizeof(struct usb_qualifier_descriptor),
 588         .bDescriptorType =      USB_DT_DEVICE_QUALIFIER,
 589         .bcdUSB =               __constant_cpu_to_le16 (0x0200),
 590         /* assumes ep0 uses the same value for both speeds ... */
 591         .bNumConfigurations =   GS_NUM_CONFIGS,
 592 };
 593
 594 static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
 595         (struct usb_descriptor_header *) &gs_otg_descriptor,
 596         (struct usb_descriptor_header *) &gs_bulk_interface_desc,
 597         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
 598         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
 599         NULL,
 600 };
 601
 602 static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
 603         (struct usb_descriptor_header *) &gs_otg_descriptor,
 604         (struct usb_descriptor_header *) &gs_control_interface_desc,
 605         (struct usb_descriptor_header *) &gs_header_desc,
 606         (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
 607         (struct usb_descriptor_header *) &gs_acm_descriptor,
 608         (struct usb_descriptor_header *) &gs_union_desc,
 609         (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
 610         (struct usb_descriptor_header *) &gs_data_interface_desc,
 611         (struct usb_descriptor_header *) &gs_highspeed_in_desc,
 612         (struct usb_descriptor_header *) &gs_highspeed_out_desc,
 613         NULL,
 614 };
 615
 616 #endif /* CONFIG_USB_GADGET_DUALSPEED */
 617
 618
 619 /* Module */
 620 MODULE_DESCRIPTION(GS_LONG_NAME);
 621 MODULE_AUTHOR("Al Borchers");
 622 MODULE_LICENSE("GPL");
 623
 624 #ifdef GS_DEBUG
 625 module_param(debug, int, S_IRUGO|S_IWUSR);
 626 MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
 627 #endif
 628
 629 module_param(read_q_size, uint, S_IRUGO);
 630 MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
 631
 632 module_param(write_q_size, uint, S_IRUGO);
 633 MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
 634
 635 module_param(write_buf_size, uint, S_IRUGO);
 636 MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
 637
 638 module_param(use_acm, uint, S_IRUGO);
 639 MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
 640
 641 module_init(gs_module_init);
 642 module_exit(gs_module_exit);
 643
 644 /*
 645 *  gs_module_init
 646 *
 647 *  Register as a USB gadget driver and a tty driver.
 648 */
 649 static int __init gs_module_init(void)
 650 {
 651         int i;
 652         int retval;
 653
 654         retval = usb_gadget_register_driver(&gs_gadget_driver);
 655         if (retval) {
 656                 printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
 657                 return retval;
 658         }
 659
 660         gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
 661         if (!gs_tty_driver)
 662                 return -ENOMEM;
 663         gs_tty_driver->owner = THIS_MODULE;
 664         gs_tty_driver->driver_name = GS_SHORT_NAME;
 665         gs_tty_driver->name = "ttygs";
 666         gs_tty_driver->devfs_name = "usb/ttygs/";
 667         gs_tty_driver->major = GS_MAJOR;
 668         gs_tty_driver->minor_start = GS_MINOR_START;
 669         gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
 670         gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
 671         gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
 672         gs_tty_driver->init_termios = tty_std_termios;
 673         gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 674         tty_set_operations(gs_tty_driver, &gs_tty_ops);
 675
 676         for (i=0; i < GS_NUM_PORTS; i++)
 677                 sema_init(&gs_open_close_sem[i], 1);
 678
 679         retval = tty_register_driver(gs_tty_driver);
 680         if (retval) {
 681                 usb_gadget_unregister_driver(&gs_gadget_driver);
 682                 put_tty_driver(gs_tty_driver);
 683                 printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
 684                 return retval;
 685         }
 686
 687         printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
 688         return 0;
 689 }
 690
 691 /*
 692 * gs_module_exit
 693 *
 694 * Unregister as a tty driver and a USB gadget driver.
 695 */
 696 static void __exit gs_module_exit(void)
 697 {
 698         tty_unregister_driver(gs_tty_driver);
 699         put_tty_driver(gs_tty_driver);
 700         usb_gadget_unregister_driver(&gs_gadget_driver);
 701
 702         printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
 703 }
 704
 705 /* TTY Driver */
 706
 707 /*
 708  * gs_open
 709  */
 710 static int gs_open(struct tty_struct *tty, struct file *file)
 711 {
 712         int port_num;
 713         unsigned long flags;
 714         struct gs_port *port;
 715         struct gs_dev *dev;
 716         struct gs_buf *buf;
 717         struct semaphore *sem;
 718         int ret;
 719
 720         port_num = tty->index;
 721
 722         gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
 723
 724         if (port_num < 0 || port_num >= GS_NUM_PORTS) {
 725                 printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
 726                         port_num, tty, file);
 727                 return -ENODEV;
 728         }
 729
 730         dev = gs_device;
 731
 732         if (dev == NULL) {
 733                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
 734                         port_num, tty, file);
 735                 return -ENODEV;
 736         }
 737
 738         sem = &gs_open_close_sem[port_num];
 739         if (down_interruptible(sem)) {
 740                 printk(KERN_ERR
 741                 "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
 742                         port_num, tty, file);
 743                 return -ERESTARTSYS;
 744         }
 745
 746         spin_lock_irqsave(&dev->dev_lock, flags);
 747
 748         if (dev->dev_config == GS_NO_CONFIG_ID) {
 749                 printk(KERN_ERR
 750                         "gs_open: (%d,%p,%p) device is not connected\n",
 751                         port_num, tty, file);
 752                 ret = -ENODEV;
 753                 goto exit_unlock_dev;
 754         }
 755
 756         port = dev->dev_port[port_num];
 757
 758         if (port == NULL) {
 759                 printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
 760                         port_num, tty, file);
 761                 ret = -ENODEV;
 762                 goto exit_unlock_dev;
 763         }
 764
 765         spin_lock(&port->port_lock);
 766         spin_unlock(&dev->dev_lock);
 767
 768         if (port->port_dev == NULL) {
 769                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
 770                         port_num, tty, file);
 771                 ret = -EIO;
 772                 goto exit_unlock_port;
 773         }
 774
 775         if (port->port_open_count > 0) {
 776                 ++port->port_open_count;
 777                 gs_debug("gs_open: (%d,%p,%p) already open\n",
 778                         port_num, tty, file);
 779                 ret = 0;
 780                 goto exit_unlock_port;
 781         }
 782
 783         tty->driver_data = NULL;
 784
 785         /* mark port as in use, we can drop port lock and sleep if necessary */
 786         port->port_in_use = 1;
 787
 788         /* allocate write buffer on first open */
 789         if (port->port_write_buf == NULL) {
 790                 spin_unlock_irqrestore(&port->port_lock, flags);
 791                 buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
 792                 spin_lock_irqsave(&port->port_lock, flags);
 793
 794                 /* might have been disconnected while asleep, check */
 795                 if (port->port_dev == NULL) {
 796                         printk(KERN_ERR
 797                                 "gs_open: (%d,%p,%p) port disconnected (2)\n",
 798                                 port_num, tty, file);
 799                         port->port_in_use = 0;
 800                         ret = -EIO;
 801                         goto exit_unlock_port;
 802                 }
 803
 804                 if ((port->port_write_buf=buf) == NULL) {
 805                         printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
 806                                 port_num, tty, file);
 807                         port->port_in_use = 0;
 808                         ret = -ENOMEM;
 809                         goto exit_unlock_port;
 810                 }
 811
 812         }
 813
 814         /* wait for carrier detect (not implemented) */
 815
 816         /* might have been disconnected while asleep, check */
 817         if (port->port_dev == NULL) {
 818                 printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
 819                         port_num, tty, file);
 820                 port->port_in_use = 0;
 821                 ret = -EIO;
 822                 goto exit_unlock_port;
 823         }
 824
 825         tty->driver_data = port;
 826         port->port_tty = tty;
 827         port->port_open_count = 1;
 828         port->port_in_use = 0;
 829
 830         gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
 831
 832         ret = 0;
 833
 834 exit_unlock_port:
 835         spin_unlock_irqrestore(&port->port_lock, flags);
 836         up(sem);
 837         return ret;
 838
 839 exit_unlock_dev:
 840         spin_unlock_irqrestore(&dev->dev_lock, flags);
 841         up(sem);
 842         return ret;
 843
 844 }
 845
 846 /*
 847  * gs_close
 848  */
 849 static void gs_close(struct tty_struct *tty, struct file *file)
 850 {
 851         unsigned long flags;
 852         struct gs_port *port = tty->driver_data;
 853         struct semaphore *sem;
 854
 855         if (port == NULL) {
 856                 printk(KERN_ERR "gs_close: NULL port pointer\n");
 857                 return;
 858         }
 859
 860         gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
 861
 862         sem = &gs_open_close_sem[port->port_num];
 863         down(sem);
 864
 865         spin_lock_irqsave(&port->port_lock, flags);
 866
 867         if (port->port_open_count == 0) {
 868                 printk(KERN_ERR
 869                         "gs_close: (%d,%p,%p) port is already closed\n",
 870                         port->port_num, tty, file);
 871                 goto exit;
 872         }
 873
 874         if (port->port_open_count > 1) {
 875                 --port->port_open_count;
 876                 goto exit;
 877         }
 878
 879         /* free disconnected port on final close */
 880         if (port->port_dev == NULL) {
 881                 kfree(port);
 882                 goto exit;
 883         }
 884
 885         /* mark port as closed but in use, we can drop port lock */
 886         /* and sleep if necessary */
 887         port->port_in_use = 1;
 888         port->port_open_count = 0;
 889
 890         /* wait for write buffer to drain, or */
 891         /* at most GS_CLOSE_TIMEOUT seconds */
 892         if (gs_buf_data_avail(port->port_write_buf) > 0) {
 893                 wait_cond_interruptible_timeout(port->port_write_wait,
 894                 port->port_dev == NULL
 895                 || gs_buf_data_avail(port->port_write_buf) == 0,
 896                 &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ);
 897         }
 898
 899         /* free disconnected port on final close */
 900         /* (might have happened during the above sleep) */
 901         if (port->port_dev == NULL) {
 902                 kfree(port);
 903                 goto exit;
 904         }
 905
 906         gs_buf_clear(port->port_write_buf);
 907
 908         tty->driver_data = NULL;
 909         port->port_tty = NULL;
 910         port->port_in_use = 0;
 911
 912         gs_debug("gs_close: (%d,%p,%p) completed\n",
 913                 port->port_num, tty, file);
 914
 915 exit:
 916         spin_unlock_irqrestore(&port->port_lock, flags);
 917         up(sem);
 918 }
 919
 920 /*
 921  * gs_write
 922  */
 923 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
 924 {
 925         unsigned long flags;
 926         struct gs_port *port = tty->driver_data;
 927         int ret;
 928
 929         if (port == NULL) {
 930                 printk(KERN_ERR "gs_write: NULL port pointer\n");
 931                 return -EIO;
 932         }
 933
 934         gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
 935                 count);
 936
 937         if (count == 0)
 938                 return 0;
 939
 940         spin_lock_irqsave(&port->port_lock, flags);
 941
 942         if (port->port_dev == NULL) {
 943                 printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
 944                         port->port_num, tty);
 945                 ret = -EIO;
 946                 goto exit;
 947         }
 948
 949         if (port->port_open_count == 0) {
 950                 printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
 951                         port->port_num, tty);
 952                 ret = -EBADF;
 953                 goto exit;
 954         }
 955
 956         count = gs_buf_put(port->port_write_buf, buf, count);
 957
 958         spin_unlock_irqrestore(&port->port_lock, flags);
 959
 960         gs_send(gs_device);
 961
 962         gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
 963                 count);
 964
 965         return count;
 966
 967 exit:
 968         spin_unlock_irqrestore(&port->port_lock, flags);
 969         return ret;
 970 }
 971
 972 /*
 973  * gs_put_char
 974  */
 975 static void gs_put_char(struct tty_struct *tty, unsigned char ch)
 976 {
 977         unsigned long flags;
 978         struct gs_port *port = tty->driver_data;
 979
 980         if (port == NULL) {
 981                 printk(KERN_ERR "gs_put_char: NULL port pointer\n");
 982                 return;
 983         }
 984
 985         gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
 986
 987         spin_lock_irqsave(&port->port_lock, flags);
 988
 989         if (port->port_dev == NULL) {
 990                 printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
 991                         port->port_num, tty);
 992                 goto exit;
 993         }
 994
 995         if (port->port_open_count == 0) {
 996                 printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
 997                         port->port_num, tty);
 998                 goto exit;
 999         }
1000
1001         gs_buf_put(port->port_write_buf, &ch, 1);
1002
1003 exit:
1004         spin_unlock_irqrestore(&port->port_lock, flags);
1005 }
1006
1007 /*
1008  * gs_flush_chars
1009  */
1010 static void gs_flush_chars(struct tty_struct *tty)
1011 {
1012         unsigned long flags;
1013         struct gs_port *port = tty->driver_data;
1014
1015         if (port == NULL) {
1016                 printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
1017                 return;
1018         }
1019
1020         gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
1021
1022         spin_lock_irqsave(&port->port_lock, flags);
1023
1024         if (port->port_dev == NULL) {
1025                 printk(KERN_ERR
1026                         "gs_flush_chars: (%d,%p) port is not connected\n",
1027                         port->port_num, tty);
1028                 goto exit;
1029         }
1030
1031         if (port->port_open_count == 0) {
1032                 printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
1033                         port->port_num, tty);
1034                 goto exit;
1035         }
1036
1037         spin_unlock_irqrestore(&port->port_lock, flags);
1038
1039         gs_send(gs_device);
1040
1041         return;
1042
1043 exit:
1044         spin_unlock_irqrestore(&port->port_lock, flags);
1045 }
1046
1047 /*
1048  * gs_write_room
1049  */
1050 static int gs_write_room(struct tty_struct *tty)
1051 {
1052
1053         int room = 0;
1054         unsigned long flags;
1055         struct gs_port *port = tty->driver_data;
1056
1057
1058         if (port == NULL)
1059                 return 0;
1060
1061         spin_lock_irqsave(&port->port_lock, flags);
1062
1063         if (port->port_dev != NULL && port->port_open_count > 0
1064         && port->port_write_buf != NULL)
1065                 room = gs_buf_space_avail(port->port_write_buf);
1066
1067         spin_unlock_irqrestore(&port->port_lock, flags);
1068
1069         gs_debug("gs_write_room: (%d,%p) room=%d\n",
1070                 port->port_num, tty, room);
1071
1072         return room;
1073 }
1074
1075 /*
1076  * gs_chars_in_buffer
1077  */
1078 static int gs_chars_in_buffer(struct tty_struct *tty)
1079 {
1080         int chars = 0;
1081         unsigned long flags;
1082         struct gs_port *port = tty->driver_data;
1083
1084         if (port == NULL)
1085                 return 0;
1086
1087         spin_lock_irqsave(&port->port_lock, flags);
1088
1089         if (port->port_dev != NULL && port->port_open_count > 0
1090         && port->port_write_buf != NULL)
1091                 chars = gs_buf_data_avail(port->port_write_buf);
1092
1093         spin_unlock_irqrestore(&port->port_lock, flags);
1094
1095         gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
1096                 port->port_num, tty, chars);
1097
1098         return chars;
1099 }
1100
1101 /*
1102  * gs_throttle
1103  */
1104 static void gs_throttle(struct tty_struct *tty)
1105 {
1106 }
1107
1108 /*
1109  * gs_unthrottle
1110  */
1111 static void gs_unthrottle(struct tty_struct *tty)
1112 {
1113 }
1114
1115 /*
1116  * gs_break
1117  */
1118 static void gs_break(struct tty_struct *tty, int break_state)
1119 {
1120 }
1121
1122 /*
1123  * gs_ioctl
1124  */
1125 static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1126 {
1127         struct gs_port *port = tty->driver_data;
1128
1129         if (port == NULL) {
1130                 printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
1131                 return -EIO;
1132         }
1133
1134         gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
1135                 port->port_num, tty, file, cmd, arg);
1136
1137         /* handle ioctls */
1138
1139         /* could not handle ioctl */
1140         return -ENOIOCTLCMD;
1141 }
1142
1143 /*
1144  * gs_set_termios
1145  */
1146 static void gs_set_termios(struct tty_struct *tty, struct termios *old)
1147 {
1148 }
1149
1150 /*
1151 * gs_send
1152 *
1153 * This function finds available write requests, calls
1154 * gs_send_packet to fill these packets with data, and
1155 * continues until either there are no more write requests
1156 * available or no more data to send.  This function is
1157 * run whenever data arrives or write requests are available.
1158 */
1159 static int gs_send(struct gs_dev *dev)
1160 {
1161         int ret,len;
1162         unsigned long flags;
1163         struct usb_ep *ep;
1164         struct usb_request *req;
1165         struct gs_req_entry *req_entry;
1166
1167         if (dev == NULL) {
1168                 printk(KERN_ERR "gs_send: NULL device pointer\n");
1169                 return -ENODEV;
1170         }
1171
1172         spin_lock_irqsave(&dev->dev_lock, flags);
1173
1174         ep = dev->dev_in_ep;
1175
1176         while(!list_empty(&dev->dev_req_list)) {
1177
1178                 req_entry = list_entry(dev->dev_req_list.next,
1179                         struct gs_req_entry, re_entry);
1180
1181                 req = req_entry->re_req;
1182
1183                 len = gs_send_packet(dev, req->buf, ep->maxpacket);
1184
1185                 if (len > 0) {
1186 gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
1187                         list_del(&req_entry->re_entry);
1188                         req->length = len;
1189                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1190                                 printk(KERN_ERR
1191                                 "gs_send: cannot queue read request, ret=%d\n",
1192                                         ret);
1193                                 break;
1194                         }
1195                 } else {
1196                         break;
1197                 }
1198
1199         }
1200
1201         spin_unlock_irqrestore(&dev->dev_lock, flags);
1202
1203         return 0;
1204 }
1205
1206 /*
1207  * gs_send_packet
1208  *
1209  * If there is data to send, a packet is built in the given
1210  * buffer and the size is returned.  If there is no data to
1211  * send, 0 is returned.  If there is any error a negative
1212  * error number is returned.
1213  *
1214  * Called during USB completion routine, on interrupt time.
1215  *
1216  * We assume that disconnect will not happen until all completion
1217  * routines have completed, so we can assume that the dev_port
1218  * array does not change during the lifetime of this function.
1219  */
1220 static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
1221 {
1222         unsigned int len;
1223         struct gs_port *port;
1224
1225         /* TEMPORARY -- only port 0 is supported right now */
1226         port = dev->dev_port[0];
1227
1228         if (port == NULL) {
1229                 printk(KERN_ERR
1230                         "gs_send_packet: port=%d, NULL port pointer\n",
1231                         0);
1232                 return -EIO;
1233         }
1234
1235         spin_lock(&port->port_lock);
1236
1237         len = gs_buf_data_avail(port->port_write_buf);
1238         if (len < size)
1239                 size = len;
1240
1241         if (size == 0)
1242                 goto exit;
1243
1244         size = gs_buf_get(port->port_write_buf, packet, size);
1245
1246         if (port->port_tty)
1247                 wake_up_interruptible(&port->port_tty->write_wait);
1248
1249 exit:
1250         spin_unlock(&port->port_lock);
1251         return size;
1252 }
1253
1254 /*
1255  * gs_recv_packet
1256  *
1257  * Called for each USB packet received.  Reads the packet
1258  * header and stuffs the data in the appropriate tty buffer.
1259  * Returns 0 if successful, or a negative error number.
1260  *
1261  * Called during USB completion routine, on interrupt time.
1262  *
1263  * We assume that disconnect will not happen until all completion
1264  * routines have completed, so we can assume that the dev_port
1265  * array does not change during the lifetime of this function.
1266  */
1267 static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
1268 {
1269         unsigned int len;
1270         struct gs_port *port;
1271         int ret;
1272
1273         /* TEMPORARY -- only port 0 is supported right now */
1274         port = dev->dev_port[0];
1275
1276         if (port == NULL) {
1277                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
1278                         port->port_num);
1279                 return -EIO;
1280         }
1281
1282         spin_lock(&port->port_lock);
1283
1284         if (port->port_open_count == 0) {
1285                 printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
1286                         port->port_num);
1287                 ret = -EIO;
1288                 goto exit;
1289         }
1290
1291         if (port->port_tty == NULL) {
1292                 printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
1293                         port->port_num);
1294                 ret = -EIO;
1295                 goto exit;
1296         }
1297
1298         if (port->port_tty->magic != TTY_MAGIC) {
1299                 printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
1300                         port->port_num);
1301                 ret = -EIO;
1302                 goto exit;
1303         }
1304
1305         len = (unsigned int)(TTY_FLIPBUF_SIZE - port->port_tty->flip.count);
1306         if (len < size)
1307                 size = len;
1308
1309         if (size > 0) {
1310                 memcpy(port->port_tty->flip.char_buf_ptr, packet, size);
1311                 port->port_tty->flip.char_buf_ptr += size;
1312                 port->port_tty->flip.count += size;
1313                 tty_flip_buffer_push(port->port_tty);
1314                 wake_up_interruptible(&port->port_tty->read_wait);
1315         }
1316
1317         ret = 0;
1318
1319 exit:
1320         spin_unlock(&port->port_lock);
1321         return ret;
1322 }
1323
1324 /*
1325 * gs_read_complete
1326 */
1327 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
1328 {
1329         int ret;
1330         struct gs_dev *dev = ep->driver_data;
1331
1332         if (dev == NULL) {
1333                 printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
1334                 return;
1335         }
1336
1337         switch(req->status) {
1338         case 0:
1339                 /* normal completion */
1340                 gs_recv_packet(dev, req->buf, req->actual);
1341 requeue:
1342                 req->length = ep->maxpacket;
1343                 if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1344                         printk(KERN_ERR
1345                         "gs_read_complete: cannot queue read request, ret=%d\n",
1346                                 ret);
1347                 }
1348                 break;
1349
1350         case -ESHUTDOWN:
1351                 /* disconnect */
1352                 gs_debug("gs_read_complete: shutdown\n");
1353                 gs_free_req(ep, req);
1354                 break;
1355
1356         default:
1357                 /* unexpected */
1358                 printk(KERN_ERR
1359                 "gs_read_complete: unexpected status error, status=%d\n",
1360                         req->status);
1361                 goto requeue;
1362                 break;
1363         }
1364 }
1365
1366 /*
1367 * gs_write_complete
1368 */
1369 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
1370 {
1371         struct gs_dev *dev = ep->driver_data;
1372         struct gs_req_entry *gs_req = req->context;
1373
1374         if (dev == NULL) {
1375                 printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
1376                 return;
1377         }
1378
1379         switch(req->status) {
1380         case 0:
1381                 /* normal completion */
1382 requeue:
1383                 if (gs_req == NULL) {
1384                         printk(KERN_ERR
1385                                 "gs_write_complete: NULL request pointer\n");
1386                         return;
1387                 }
1388
1389                 spin_lock(&dev->dev_lock);
1390                 list_add(&gs_req->re_entry, &dev->dev_req_list);
1391                 spin_unlock(&dev->dev_lock);
1392
1393                 gs_send(dev);
1394
1395                 break;
1396
1397         case -ESHUTDOWN:
1398                 /* disconnect */
1399                 gs_debug("gs_write_complete: shutdown\n");
1400                 gs_free_req(ep, req);
1401                 break;
1402
1403         default:
1404                 printk(KERN_ERR
1405                 "gs_write_complete: unexpected status error, status=%d\n",
1406                         req->status);
1407                 goto requeue;
1408                 break;
1409         }
1410 }
1411
1412 /* Gadget Driver */
1413
1414 /*
1415  * gs_bind
1416  *
1417  * Called on module load.  Allocates and initializes the device
1418  * structure and a control request.
1419  */
1420 static int gs_bind(struct usb_gadget *gadget)
1421 {
1422         int ret;
1423         struct usb_ep *ep;
1424         struct gs_dev *dev;
1425         int gcnum;
1426
1427         /* Some controllers can't support CDC ACM:
1428          * - sh doesn't support multiple interfaces or configs;
1429          * - sa1100 doesn't have a third interrupt endpoint
1430          */
1431         if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
1432                 use_acm = 0;
1433
1434         gcnum = usb_gadget_controller_number(gadget);
1435         if (gcnum >= 0)
1436                 gs_device_desc.bcdDevice =
1437                                 cpu_to_le16(GS_VERSION_NUM | gcnum);
1438         else {
1439                 printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
1440                         gadget->name);
1441                 /* unrecognized, but safe unless bulk is REALLY quirky */
1442                 gs_device_desc.bcdDevice =
1443                         __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
1444         }
1445
1446         usb_ep_autoconfig_reset(gadget);
1447
1448         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
1449         if (!ep)
1450                 goto autoconf_fail;
1451         EP_IN_NAME = ep->name;
1452         ep->driver_data = ep;   /* claim the endpoint */
1453
1454         ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
1455         if (!ep)
1456                 goto autoconf_fail;
1457         EP_OUT_NAME = ep->name;
1458         ep->driver_data = ep;   /* claim the endpoint */
1459
1460         if (use_acm) {
1461                 ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
1462                 if (!ep) {
1463                         printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
1464                         goto autoconf_fail;
1465                 }
1466                 gs_device_desc.idProduct = __constant_cpu_to_le16(
1467                                                 GS_CDC_PRODUCT_ID),
1468                 EP_NOTIFY_NAME = ep->name;
1469                 ep->driver_data = ep;   /* claim the endpoint */
1470         }
1471
1472         gs_device_desc.bDeviceClass = use_acm
1473                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1474         gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
1475
1476 #ifdef CONFIG_USB_GADGET_DUALSPEED
1477         gs_qualifier_desc.bDeviceClass = use_acm
1478                 ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
1479         /* assume ep0 uses the same packet size for both speeds */
1480         gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
1481         /* assume endpoints are dual-speed */
1482         gs_highspeed_notify_desc.bEndpointAddress =
1483                 gs_fullspeed_notify_desc.bEndpointAddress;
1484         gs_highspeed_in_desc.bEndpointAddress =
1485                 gs_fullspeed_in_desc.bEndpointAddress;
1486         gs_highspeed_out_desc.bEndpointAddress =
1487                 gs_fullspeed_out_desc.bEndpointAddress;
1488 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1489
1490         usb_gadget_set_selfpowered(gadget);
1491
1492         if (gadget->is_otg) {
1493                 gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
1494                 gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1495                 gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1496         }
1497
1498         gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
1499         if (dev == NULL)
1500                 return -ENOMEM;
1501
1502         snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1503                 system_utsname.sysname, system_utsname.release,
1504                 gadget->name);
1505
1506         memset(dev, 0, sizeof(struct gs_dev));
1507         dev->dev_gadget = gadget;
1508         spin_lock_init(&dev->dev_lock);
1509         INIT_LIST_HEAD(&dev->dev_req_list);
1510         set_gadget_data(gadget, dev);
1511
1512         if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
1513                 printk(KERN_ERR "gs_bind: cannot allocate ports\n");
1514                 gs_unbind(gadget);
1515                 return ret;
1516         }
1517
1518         /* preallocate control response and buffer */
1519         dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
1520                 GFP_KERNEL);
1521         if (dev->dev_ctrl_req == NULL) {
1522                 gs_unbind(gadget);
1523                 return -ENOMEM;
1524         }
1525         dev->dev_ctrl_req->complete = gs_setup_complete;
1526
1527         gadget->ep0->driver_data = dev;
1528
1529         printk(KERN_INFO "gs_bind: %s %s bound\n",
1530                 GS_LONG_NAME, GS_VERSION_STR);
1531
1532         return 0;
1533
1534 autoconf_fail:
1535         printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
1536         return -ENODEV;
1537 }
1538
1539 /*
1540  * gs_unbind
1541  *
1542  * Called on module unload.  Frees the control request and device
1543  * structure.
1544  */
1545 static void gs_unbind(struct usb_gadget *gadget)
1546 {
1547         struct gs_dev *dev = get_gadget_data(gadget);
1548
1549         gs_device = NULL;
1550
1551         /* read/write requests already freed, only control request remains */
1552         if (dev != NULL) {
1553                 if (dev->dev_ctrl_req != NULL) {
1554                         gs_free_req(gadget->ep0, dev->dev_ctrl_req);
1555                         dev->dev_ctrl_req = NULL;
1556                 }
1557                 gs_free_ports(dev);
1558                 kfree(dev);
1559                 set_gadget_data(gadget, NULL);
1560         }
1561
1562         printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
1563                 GS_VERSION_STR);
1564 }
1565
1566 /*
1567  * gs_setup
1568  *
1569  * Implements all the control endpoint functionality that's not
1570  * handled in hardware or the hardware driver.
1571  *
1572  * Returns the size of the data sent to the host, or a negative
1573  * error number.
1574  */
1575 static int gs_setup(struct usb_gadget *gadget,
1576         const struct usb_ctrlrequest *ctrl)
1577 {
1578         int ret = -EOPNOTSUPP;
1579         struct gs_dev *dev = get_gadget_data(gadget);
1580         struct usb_request *req = dev->dev_ctrl_req;
1581         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1582         u16 wValue = le16_to_cpu(ctrl->wValue);
1583         u16 wLength = le16_to_cpu(ctrl->wLength);
1584
1585         switch (ctrl->bRequestType & USB_TYPE_MASK) {
1586         case USB_TYPE_STANDARD:
1587                 ret = gs_setup_standard(gadget,ctrl);
1588                 break;
1589
1590         case USB_TYPE_CLASS:
1591                 ret = gs_setup_class(gadget,ctrl);
1592                 break;
1593
1594         default:
1595                 printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1596                         ctrl->bRequestType, ctrl->bRequest,
1597                         wValue, wIndex, wLength);
1598                 break;
1599         }
1600
1601         /* respond with data transfer before status phase? */
1602         if (ret >= 0) {
1603                 req->length = ret;
1604                 req->zero = ret < wLength
1605                                 && (ret % gadget->ep0->maxpacket) == 0;
1606                 ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1607                 if (ret < 0) {
1608                         printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
1609                                 ret);
1610                         req->status = 0;
1611                         gs_setup_complete(gadget->ep0, req);
1612                 }
1613         }
1614
1615         /* device either stalls (ret < 0) or reports success */
1616         return ret;
1617 }
1618
1619 static int gs_setup_standard(struct usb_gadget *gadget,
1620         const struct usb_ctrlrequest *ctrl)
1621 {
1622         int ret = -EOPNOTSUPP;
1623         struct gs_dev *dev = get_gadget_data(gadget);
1624         struct usb_request *req = dev->dev_ctrl_req;
1625         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1626         u16 wValue = le16_to_cpu(ctrl->wValue);
1627         u16 wLength = le16_to_cpu(ctrl->wLength);
1628
1629         switch (ctrl->bRequest) {
1630         case USB_REQ_GET_DESCRIPTOR:
1631                 if (ctrl->bRequestType != USB_DIR_IN)
1632                         break;
1633
1634                 switch (wValue >> 8) {
1635                 case USB_DT_DEVICE:
1636                         ret = min(wLength,
1637                                 (u16)sizeof(struct usb_device_descriptor));
1638                         memcpy(req->buf, &gs_device_desc, ret);
1639                         break;
1640
1641 #ifdef CONFIG_USB_GADGET_DUALSPEED
1642                 case USB_DT_DEVICE_QUALIFIER:
1643                         if (!gadget->is_dualspeed)
1644                                 break;
1645                         ret = min(wLength,
1646                                 (u16)sizeof(struct usb_qualifier_descriptor));
1647                         memcpy(req->buf, &gs_qualifier_desc, ret);
1648                         break;
1649
1650                 case USB_DT_OTHER_SPEED_CONFIG:
1651                         if (!gadget->is_dualspeed)
1652                                 break;
1653                         /* fall through */
1654 #endif /* CONFIG_USB_GADGET_DUALSPEED */
1655                 case USB_DT_CONFIG:
1656                         ret = gs_build_config_buf(req->buf, gadget->speed,
1657                                 wValue >> 8, wValue & 0xff,
1658                                 gadget->is_otg);
1659                         if (ret >= 0)
1660                                 ret = min(wLength, (u16)ret);
1661                         break;
1662
1663                 case USB_DT_STRING:
1664                         /* wIndex == language code. */
1665                         ret = usb_gadget_get_string(&gs_string_table,
1666                                 wValue & 0xff, req->buf);
1667                         if (ret >= 0)
1668                                 ret = min(wLength, (u16)ret);
1669                         break;
1670                 }
1671                 break;
1672
1673         case USB_REQ_SET_CONFIGURATION:
1674                 if (ctrl->bRequestType != 0)
1675                         break;
1676                 spin_lock(&dev->dev_lock);
1677                 ret = gs_set_config(dev, wValue);
1678                 spin_unlock(&dev->dev_lock);
1679                 break;
1680
1681         case USB_REQ_GET_CONFIGURATION:
1682                 if (ctrl->bRequestType != USB_DIR_IN)
1683                         break;
1684                 *(u8 *)req->buf = dev->dev_config;
1685                 ret = min(wLength, (u16)1);
1686                 break;
1687
1688         case USB_REQ_SET_INTERFACE:
1689                 if (ctrl->bRequestType != USB_RECIP_INTERFACE
1690                                 || !dev->dev_config
1691                                 || wIndex >= GS_MAX_NUM_INTERFACES)
1692                         break;
1693                 if (dev->dev_config == GS_BULK_CONFIG_ID
1694                                 && wIndex != GS_BULK_INTERFACE_ID)
1695                         break;
1696                 /* no alternate interface settings */
1697                 if (wValue != 0)
1698                         break;
1699                 spin_lock(&dev->dev_lock);
1700                 /* PXA hardware partially handles SET_INTERFACE;
1701                  * we need to kluge around that interference.  */
1702                 if (gadget_is_pxa(gadget)) {
1703                         ret = gs_set_config(dev, use_acm ?
1704                                 GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
1705                         goto set_interface_done;
1706                 }
1707                 if (dev->dev_config != GS_BULK_CONFIG_ID
1708                                 && wIndex == GS_CONTROL_INTERFACE_ID) {
1709                         if (dev->dev_notify_ep) {
1710                                 usb_ep_disable(dev->dev_notify_ep);
1711                                 usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
1712                         }
1713                 } else {
1714                         usb_ep_disable(dev->dev_in_ep);
1715                         usb_ep_disable(dev->dev_out_ep);
1716                         usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
1717                         usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
1718                 }
1719                 ret = 0;
1720 set_interface_done:
1721                 spin_unlock(&dev->dev_lock);
1722                 break;
1723
1724         case USB_REQ_GET_INTERFACE:
1725                 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
1726                 || dev->dev_config == GS_NO_CONFIG_ID)
1727                         break;
1728                 if (wIndex >= GS_MAX_NUM_INTERFACES
1729                                 || (dev->dev_config == GS_BULK_CONFIG_ID
1730                                 && wIndex != GS_BULK_INTERFACE_ID)) {
1731                         ret = -EDOM;
1732                         break;
1733                 }
1734                 /* no alternate interface settings */
1735                 *(u8 *)req->buf = 0;
1736                 ret = min(wLength, (u16)1);
1737                 break;
1738
1739         default:
1740                 printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1741                         ctrl->bRequestType, ctrl->bRequest,
1742                         wValue, wIndex, wLength);
1743                 break;
1744         }
1745
1746         return ret;
1747 }
1748
1749 static int gs_setup_class(struct usb_gadget *gadget,
1750         const struct usb_ctrlrequest *ctrl)
1751 {
1752         int ret = -EOPNOTSUPP;
1753         struct gs_dev *dev = get_gadget_data(gadget);
1754         struct gs_port *port = dev->dev_port[0];        /* ACM only has one port */
1755         struct usb_request *req = dev->dev_ctrl_req;
1756         u16 wIndex = le16_to_cpu(ctrl->wIndex);
1757         u16 wValue = le16_to_cpu(ctrl->wValue);
1758         u16 wLength = le16_to_cpu(ctrl->wLength);
1759
1760         switch (ctrl->bRequest) {
1761         case USB_CDC_REQ_SET_LINE_CODING:
1762                 ret = min(wLength,
1763                         (u16)sizeof(struct usb_cdc_line_coding));
1764                 if (port) {
1765                         spin_lock(&port->port_lock);
1766                         memcpy(&port->port_line_coding, req->buf, ret);
1767                         spin_unlock(&port->port_lock);
1768                 }
1769                 break;
1770
1771         case USB_CDC_REQ_GET_LINE_CODING:
1772                 port = dev->dev_port[0];        /* ACM only has one port */
1773                 ret = min(wLength,
1774                         (u16)sizeof(struct usb_cdc_line_coding));
1775                 if (port) {
1776                         spin_lock(&port->port_lock);
1777                         memcpy(req->buf, &port->port_line_coding, ret);
1778                         spin_unlock(&port->port_lock);
1779                 }
1780                 break;
1781
1782         case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
1783                 ret = 0;
1784                 break;
1785
1786         default:
1787                 printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
1788                         ctrl->bRequestType, ctrl->bRequest,
1789                         wValue, wIndex, wLength);
1790                 break;
1791         }
1792
1793         return ret;
1794 }
1795
1796 /*
1797  * gs_setup_complete
1798  */
1799 static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
1800 {
1801         if (req->status || req->actual != req->length) {
1802                 printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
1803                         req->status, req->actual, req->length);
1804         }
1805 }
1806
1807 /*
1808  * gs_disconnect
1809  *
1810  * Called when the device is disconnected.  Frees the closed
1811  * ports and disconnects open ports.  Open ports will be freed
1812  * on close.  Then reallocates the ports for the next connection.
1813  */
1814 static void gs_disconnect(struct usb_gadget *gadget)
1815 {
1816         unsigned long flags;
1817         struct gs_dev *dev = get_gadget_data(gadget);
1818
1819         spin_lock_irqsave(&dev->dev_lock, flags);
1820
1821         gs_reset_config(dev);
1822
1823         /* free closed ports and disconnect open ports */
1824         /* (open ports will be freed when closed) */
1825         gs_free_ports(dev);
1826
1827         /* re-allocate ports for the next connection */
1828         if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
1829                 printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
1830
1831         spin_unlock_irqrestore(&dev->dev_lock, flags);
1832
1833         printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
1834 }
1835
1836 /*
1837  * gs_set_config
1838  *
1839  * Configures the device by enabling device specific
1840  * optimizations, setting up the endpoints, allocating
1841  * read and write requests and queuing read requests.
1842  *
1843  * The device lock must be held when calling this function.
1844  */
1845 static int gs_set_config(struct gs_dev *dev, unsigned config)
1846 {
1847         int i;
1848         int ret = 0;
1849         struct usb_gadget *gadget = dev->dev_gadget;
1850         struct usb_ep *ep;
1851         struct usb_endpoint_descriptor *ep_desc;
1852         struct usb_request *req;
1853         struct gs_req_entry *req_entry;
1854
1855         if (dev == NULL) {
1856                 printk(KERN_ERR "gs_set_config: NULL device pointer\n");
1857                 return 0;
1858         }
1859
1860         if (config == dev->dev_config)
1861                 return 0;
1862
1863         gs_reset_config(dev);
1864
1865         switch (config) {
1866         case GS_NO_CONFIG_ID:
1867                 return 0;
1868         case GS_BULK_CONFIG_ID:
1869                 if (use_acm)
1870                         return -EINVAL;
1871                 /* device specific optimizations */
1872                 if (gadget_is_net2280(gadget))
1873                         net2280_set_fifo_mode(gadget, 1);
1874                 break;
1875         case GS_ACM_CONFIG_ID:
1876                 if (!use_acm)
1877                         return -EINVAL;
1878                 /* device specific optimizations */
1879                 if (gadget_is_net2280(gadget))
1880                         net2280_set_fifo_mode(gadget, 1);
1881                 break;
1882         default:
1883                 return -EINVAL;
1884         }
1885
1886         dev->dev_config = config;
1887
1888         gadget_for_each_ep(ep, gadget) {
1889
1890                 if (EP_NOTIFY_NAME
1891                 && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
1892                         ep_desc = GS_SPEED_SELECT(
1893                                 gadget->speed == USB_SPEED_HIGH,
1894                                 &gs_highspeed_notify_desc,
1895                                 &gs_fullspeed_notify_desc);
1896                         ret = usb_ep_enable(ep,ep_desc);
1897                         if (ret == 0) {
1898                                 ep->driver_data = dev;
1899                                 dev->dev_notify_ep = ep;
1900                                 dev->dev_notify_ep_desc = ep_desc;
1901                         } else {
1902                                 printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
1903                                         ep->name, ret);
1904                                 goto exit_reset_config;
1905                         }
1906                 }
1907
1908                 else if (strcmp(ep->name, EP_IN_NAME) == 0) {
1909                         ep_desc = GS_SPEED_SELECT(
1910                                 gadget->speed == USB_SPEED_HIGH,
1911                                 &gs_highspeed_in_desc,
1912                                 &gs_fullspeed_in_desc);
1913                         ret = usb_ep_enable(ep,ep_desc);
1914                         if (ret == 0) {
1915                                 ep->driver_data = dev;
1916                                 dev->dev_in_ep = ep;
1917                                 dev->dev_in_ep_desc = ep_desc;
1918                         } else {
1919                                 printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
1920                                         ep->name, ret);
1921                                 goto exit_reset_config;
1922                         }
1923                 }
1924
1925                 else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
1926                         ep_desc = GS_SPEED_SELECT(
1927                                 gadget->speed == USB_SPEED_HIGH,
1928                                 &gs_highspeed_out_desc,
1929                                 &gs_fullspeed_out_desc);
1930                         ret = usb_ep_enable(ep,ep_desc);
1931                         if (ret == 0) {
1932                                 ep->driver_data = dev;
1933                                 dev->dev_out_ep = ep;
1934                                 dev->dev_out_ep_desc = ep_desc;
1935                         } else {
1936                                 printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
1937                                         ep->name, ret);
1938                                 goto exit_reset_config;
1939                         }
1940                 }
1941
1942         }
1943
1944         if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
1945         || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
1946                 printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
1947                 ret = -ENODEV;
1948                 goto exit_reset_config;
1949         }
1950
1951         /* allocate and queue read requests */
1952         ep = dev->dev_out_ep;
1953         for (i=0; i<read_q_size && ret == 0; i++) {
1954                 if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
1955                         req->complete = gs_read_complete;
1956                         if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
1957                                 printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
1958                                         ret);
1959                         }
1960                 } else {
1961                         printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
1962                         ret = -ENOMEM;
1963                         goto exit_reset_config;
1964                 }
1965         }
1966
1967         /* allocate write requests, and put on free list */
1968         ep = dev->dev_in_ep;
1969         for (i=0; i<write_q_size; i++) {
1970                 if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
1971                         req_entry->re_req->complete = gs_write_complete;
1972                         list_add(&req_entry->re_entry, &dev->dev_req_list);
1973                 } else {
1974                         printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
1975                         ret = -ENOMEM;
1976                         goto exit_reset_config;
1977                 }
1978         }
1979
1980         printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
1981                 GS_LONG_NAME,
1982                 gadget->speed == USB_SPEED_HIGH ? "high" : "full",
1983                 config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
1984
1985         return 0;
1986
1987 exit_reset_config:
1988         gs_reset_config(dev);
1989         return ret;
1990 }
1991
1992 /*
1993  * gs_reset_config
1994  *
1995  * Mark the device as not configured, disable all endpoints,
1996  * which forces completion of pending I/O and frees queued
1997  * requests, and free the remaining write requests on the
1998  * free list.
1999  *
2000  * The device lock must be held when calling this function.
2001  */
2002 static void gs_reset_config(struct gs_dev *dev)
2003 {
2004         struct gs_req_entry *req_entry;
2005
2006         if (dev == NULL) {
2007                 printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
2008                 return;
2009         }
2010
2011         if (dev->dev_config == GS_NO_CONFIG_ID)
2012                 return;
2013
2014         dev->dev_config = GS_NO_CONFIG_ID;
2015
2016         /* free write requests on the free list */
2017         while(!list_empty(&dev->dev_req_list)) {
2018                 req_entry = list_entry(dev->dev_req_list.next,
2019                         struct gs_req_entry, re_entry);
2020                 list_del(&req_entry->re_entry);
2021                 gs_free_req_entry(dev->dev_in_ep, req_entry);
2022         }
2023
2024         /* disable endpoints, forcing completion of pending i/o; */
2025         /* completion handlers free their requests in this case */
2026         if (dev->dev_notify_ep) {
2027                 usb_ep_disable(dev->dev_notify_ep);
2028                 dev->dev_notify_ep = NULL;
2029         }
2030         if (dev->dev_in_ep) {
2031                 usb_ep_disable(dev->dev_in_ep);
2032                 dev->dev_in_ep = NULL;
2033         }
2034         if (dev->dev_out_ep) {
2035                 usb_ep_disable(dev->dev_out_ep);
2036                 dev->dev_out_ep = NULL;
2037         }
2038 }
2039
2040 /*
2041  * gs_build_config_buf
2042  *
2043  * Builds the config descriptors in the given buffer and returns the
2044  * length, or a negative error number.
2045  */
2046 static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
2047         u8 type, unsigned int index, int is_otg)
2048 {
2049         int len;
2050         int high_speed;
2051         const struct usb_config_descriptor *config_desc;
2052         const struct usb_descriptor_header **function;
2053
2054         if (index >= gs_device_desc.bNumConfigurations)
2055                 return -EINVAL;
2056
2057         /* other speed switches high and full speed */
2058         high_speed = (speed == USB_SPEED_HIGH);
2059         if (type == USB_DT_OTHER_SPEED_CONFIG)
2060                 high_speed = !high_speed;
2061
2062         if (use_acm) {
2063                 config_desc = &gs_acm_config_desc;
2064                 function = GS_SPEED_SELECT(high_speed,
2065                         gs_acm_highspeed_function,
2066                         gs_acm_fullspeed_function);
2067         } else {
2068                 config_desc = &gs_bulk_config_desc;
2069                 function = GS_SPEED_SELECT(high_speed,
2070                         gs_bulk_highspeed_function,
2071                         gs_bulk_fullspeed_function);
2072         }
2073
2074         /* for now, don't advertise srp-only devices */
2075         if (!is_otg)
2076                 function++;
2077
2078         len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
2079         if (len < 0)
2080                 return len;
2081
2082         ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
2083
2084         return len;
2085 }
2086
2087 /*
2088  * gs_alloc_req
2089  *
2090  * Allocate a usb_request and its buffer.  Returns a pointer to the
2091  * usb_request or NULL if there is an error.
2092  */
2093 static struct usb_request *
2094 gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
2095 {
2096         struct usb_request *req;
2097
2098         if (ep == NULL)
2099                 return NULL;
2100
2101         req = usb_ep_alloc_request(ep, kmalloc_flags);
2102
2103         if (req != NULL) {
2104                 req->length = len;
2105                 req->buf = kmalloc(len, kmalloc_flags);
2106                 if (req->buf == NULL) {
2107                         usb_ep_free_request(ep, req);
2108                         return NULL;
2109                 }
2110         }
2111
2112         return req;
2113 }
2114
2115 /*
2116  * gs_free_req
2117  *
2118  * Free a usb_request and its buffer.
2119  */
2120 static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
2121 {
2122         if (ep != NULL && req != NULL) {
2123                 kfree(req->buf);
2124                 usb_ep_free_request(ep, req);
2125         }
2126 }
2127
2128 /*
2129  * gs_alloc_req_entry
2130  *
2131  * Allocates a request and its buffer, using the given
2132  * endpoint, buffer len, and kmalloc flags.
2133  */
2134 static struct gs_req_entry *
2135 gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
2136 {
2137         struct gs_req_entry     *req;
2138
2139         req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
2140         if (req == NULL)
2141                 return NULL;
2142
2143         req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
2144         if (req->re_req == NULL) {
2145                 kfree(req);
2146                 return NULL;
2147         }
2148
2149         req->re_req->context = req;
2150
2151         return req;
2152 }
2153
2154 /*
2155  * gs_free_req_entry
2156  *
2157  * Frees a request and its buffer.
2158  */
2159 static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
2160 {
2161         if (ep != NULL && req != NULL) {
2162                 if (req->re_req != NULL)
2163                         gs_free_req(ep, req->re_req);
2164                 kfree(req);
2165         }
2166 }
2167
2168 /*
2169  * gs_alloc_ports
2170  *
2171  * Allocate all ports and set the gs_dev struct to point to them.
2172  * Return 0 if successful, or a negative error number.
2173  *
2174  * The device lock is normally held when calling this function.
2175  */
2176 static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
2177 {
2178         int i;
2179         struct gs_port *port;
2180
2181         if (dev == NULL)
2182                 return -EIO;
2183
2184         for (i=0; i<GS_NUM_PORTS; i++) {
2185                 if ((port=(struct gs_port *)kmalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
2186                         return -ENOMEM;
2187
2188                 memset(port, 0, sizeof(struct gs_port));
2189                 port->port_dev = dev;
2190                 port->port_num = i;
2191                 port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
2192                 port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
2193                 port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
2194                 port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
2195                 spin_lock_init(&port->port_lock);
2196                 init_waitqueue_head(&port->port_write_wait);
2197
2198                 dev->dev_port[i] = port;
2199         }
2200
2201         return 0;
2202 }
2203
2204 /*
2205  * gs_free_ports
2206  *
2207  * Free all closed ports.  Open ports are disconnected by
2208  * freeing their write buffers, setting their device pointers
2209  * and the pointers to them in the device to NULL.  These
2210  * ports will be freed when closed.
2211  *
2212  * The device lock is normally held when calling this function.
2213  */
2214 static void gs_free_ports(struct gs_dev *dev)
2215 {
2216         int i;
2217         unsigned long flags;
2218         struct gs_port *port;
2219
2220         if (dev == NULL)
2221                 return;
2222
2223         for (i=0; i<GS_NUM_PORTS; i++) {
2224                 if ((port=dev->dev_port[i]) != NULL) {
2225                         dev->dev_port[i] = NULL;
2226
2227                         spin_lock_irqsave(&port->port_lock, flags);
2228
2229                         if (port->port_write_buf != NULL) {
2230                                 gs_buf_free(port->port_write_buf);
2231                                 port->port_write_buf = NULL;
2232                         }
2233
2234                         if (port->port_open_count > 0 || port->port_in_use) {
2235                                 port->port_dev = NULL;
2236                                 wake_up_interruptible(&port->port_write_wait);
2237                                 if (port->port_tty) {
2238                                         wake_up_interruptible(&port->port_tty->read_wait);
2239                                         wake_up_interruptible(&port->port_tty->write_wait);
2240                                 }
2241                                 spin_unlock_irqrestore(&port->port_lock, flags);
2242                         } else {
2243                                 spin_unlock_irqrestore(&port->port_lock, flags);
2244                                 kfree(port);
2245                         }
2246
2247                 }
2248         }
2249 }
2250
2251 /* Circular Buffer */
2252
2253 /*
2254  * gs_buf_alloc
2255  *
2256  * Allocate a circular buffer and all associated memory.
2257  */
2258 static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
2259 {
2260         struct gs_buf *gb;
2261
2262         if (size == 0)
2263                 return NULL;
2264
2265         gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags);
2266         if (gb == NULL)
2267                 return NULL;
2268
2269         gb->buf_buf = kmalloc(size, kmalloc_flags);
2270         if (gb->buf_buf == NULL) {
2271                 kfree(gb);
2272                 return NULL;
2273         }
2274
2275         gb->buf_size = size;
2276         gb->buf_get = gb->buf_put = gb->buf_buf;
2277
2278         return gb;
2279 }
2280
2281 /*
2282  * gs_buf_free
2283  *
2284  * Free the buffer and all associated memory.
2285  */
2286 void gs_buf_free(struct gs_buf *gb)
2287 {
2288         if (gb) {
2289                 kfree(gb->buf_buf);
2290                 kfree(gb);
2291         }
2292 }
2293
2294 /*
2295  * gs_buf_clear
2296  *
2297  * Clear out all data in the circular buffer.
2298  */
2299 void gs_buf_clear(struct gs_buf *gb)
2300 {
2301         if (gb != NULL)
2302                 gb->buf_get = gb->buf_put;
2303                 /* equivalent to a get of all data available */
2304 }
2305
2306 /*
2307  * gs_buf_data_avail
2308  *
2309  * Return the number of bytes of data available in the circular
2310  * buffer.
2311  */
2312 unsigned int gs_buf_data_avail(struct gs_buf *gb)
2313 {
2314         if (gb != NULL)
2315                 return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
2316         else
2317                 return 0;
2318 }
2319
2320 /*
2321  * gs_buf_space_avail
2322  *
2323  * Return the number of bytes of space available in the circular
2324  * buffer.
2325  */
2326 unsigned int gs_buf_space_avail(struct gs_buf *gb)
2327 {
2328         if (gb != NULL)
2329                 return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
2330         else
2331                 return 0;
2332 }
2333
2334 /*
2335  * gs_buf_put
2336  *
2337  * Copy data data from a user buffer and put it into the circular buffer.
2338  * Restrict to the amount of space available.
2339  *
2340  * Return the number of bytes copied.
2341  */
2342 unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
2343 {
2344         unsigned int len;
2345
2346         if (gb == NULL)
2347                 return 0;
2348
2349         len  = gs_buf_space_avail(gb);
2350         if (count > len)
2351                 count = len;
2352
2353         if (count == 0)
2354                 return 0;
2355
2356         len = gb->buf_buf + gb->buf_size - gb->buf_put;
2357         if (count > len) {
2358                 memcpy(gb->buf_put, buf, len);
2359                 memcpy(gb->buf_buf, buf+len, count - len);
2360                 gb->buf_put = gb->buf_buf + count - len;
2361         } else {
2362                 memcpy(gb->buf_put, buf, count);
2363                 if (count < len)
2364                         gb->buf_put += count;
2365                 else /* count == len */
2366                         gb->buf_put = gb->buf_buf;
2367         }
2368
2369         return count;
2370 }
2371
2372 /*
2373  * gs_buf_get
2374  *
2375  * Get data from the circular buffer and copy to the given buffer.
2376  * Restrict to the amount of data available.
2377  *
2378  * Return the number of bytes copied.
2379  */
2380 unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
2381 {
2382         unsigned int len;
2383
2384         if (gb == NULL)
2385                 return 0;
2386
2387         len = gs_buf_data_avail(gb);
2388         if (count > len)
2389                 count = len;
2390
2391         if (count == 0)
2392                 return 0;
2393
2394         len = gb->buf_buf + gb->buf_size - gb->buf_get;
2395         if (count > len) {
2396                 memcpy(buf, gb->buf_get, len);
2397                 memcpy(buf+len, gb->buf_buf, count - len);
2398                 gb->buf_get = gb->buf_buf + count - len;
2399         } else {
2400                 memcpy(buf, gb->buf_get, count);
2401                 if (count < len)
2402                         gb->buf_get += count;
2403                 else /* count == len */
2404                         gb->buf_get = gb->buf_buf;
2405         }
2406
2407         return count;
2408 }