2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
24 #include <linux/smc91x.h>
26 #include <linux/spi/spi.h>
27 #include <linux/spi/ads7846.h>
28 #include <mach/pxa2xx_spi.h>
30 #include <asm/setup.h>
31 #include <asm/memory.h>
32 #include <asm/mach-types.h>
33 #include <mach/hardware.h>
35 #include <asm/sizes.h>
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/irq.h>
40 #include <asm/mach/flash.h>
42 #include <asm/hardware/sa1111.h>
44 #include <mach/pxa-regs.h>
45 #include <mach/pxa2xx-regs.h>
46 #include <mach/mfp-pxa25x.h>
47 #include <mach/audio.h>
48 #include <mach/lubbock.h>
50 #include <mach/irda.h>
51 #include <mach/pxafb.h>
57 static unsigned long lubbock_pin_config[] __initdata = {
58 GPIO15_nCS_1, /* CS1 - Flash */
59 GPIO79_nCS_3, /* CS3 - SMC ethernet */
89 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
92 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
94 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
98 local_irq_save(flags);
99 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
100 local_irq_restore(flags);
102 EXPORT_SYMBOL(lubbock_set_misc_wr);
104 static unsigned long lubbock_irq_enabled;
106 static void lubbock_mask_irq(unsigned int irq)
108 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
109 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
112 static void lubbock_unmask_irq(unsigned int irq)
114 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
115 /* the irq can be acknowledged only if deasserted, so it's done here */
116 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
117 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
120 static struct irq_chip lubbock_irq_chip = {
122 .ack = lubbock_mask_irq,
123 .mask = lubbock_mask_irq,
124 .unmask = lubbock_unmask_irq,
127 static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
129 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
131 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
132 if (likely(pending)) {
133 irq = LUBBOCK_IRQ(0) + __ffs(pending);
134 desc = irq_desc + irq;
135 desc_handle_irq(irq, desc);
137 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
141 static void __init lubbock_init_irq(void)
147 /* setup extra lubbock irqs */
148 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
149 set_irq_chip(irq, &lubbock_irq_chip);
150 set_irq_handler(irq, handle_level_irq);
151 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
154 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
155 set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
160 static int lubbock_irq_resume(struct sys_device *dev)
162 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
166 static struct sysdev_class lubbock_irq_sysclass = {
168 .resume = lubbock_irq_resume,
171 static struct sys_device lubbock_irq_device = {
172 .cls = &lubbock_irq_sysclass,
175 static int __init lubbock_irq_device_init(void)
179 if (machine_is_lubbock()) {
180 ret = sysdev_class_register(&lubbock_irq_sysclass);
182 ret = sysdev_register(&lubbock_irq_device);
187 device_initcall(lubbock_irq_device_init);
191 static int lubbock_udc_is_connected(void)
193 return (LUB_MISC_RD & (1 << 9)) == 0;
196 static struct pxa2xx_udc_mach_info udc_info __initdata = {
197 .udc_is_connected = lubbock_udc_is_connected,
198 // no D+ pullup; lubbock can't connect/disconnect in software
201 static struct resource sa1111_resources[] = {
205 .flags = IORESOURCE_MEM,
208 .start = LUBBOCK_SA1111_IRQ,
209 .end = LUBBOCK_SA1111_IRQ,
210 .flags = IORESOURCE_IRQ,
214 static struct platform_device sa1111_device = {
217 .num_resources = ARRAY_SIZE(sa1111_resources),
218 .resource = sa1111_resources,
221 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
222 * you can select it to replace the ucb1400 by switching the touchscreen cable
223 * (to J5) and poking board registers (as done below). Else it's only useful
224 * for the temperature sensors.
226 static struct pxa2xx_spi_master pxa_ssp_master_info = {
230 static int lubbock_ads7846_pendown_state(void)
232 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
236 static struct ads7846_platform_data ads_info = {
238 .vref_delay_usecs = 100, /* internal, no cap */
239 .get_pendown_state = lubbock_ads7846_pendown_state,
240 // .x_plate_ohms = 500, /* GUESS! */
241 // .y_plate_ohms = 500, /* GUESS! */
244 static void ads7846_cs(u32 command)
246 static const unsigned TS_nCS = 1 << 11;
247 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
250 static struct pxa2xx_spi_chip ads_hw = {
253 .cs_control = ads7846_cs,
256 static struct spi_board_info spi_board_info[] __initdata = { {
257 .modalias = "ads7846",
258 .platform_data = &ads_info,
259 .controller_data = &ads_hw,
260 .irq = LUBBOCK_BB_IRQ,
261 .max_speed_hz = 120000 /* max sample rate at 3V */
262 * 26 /* command + data + overhead */,
268 static struct resource smc91x_resources[] = {
270 .name = "smc91x-regs",
273 .flags = IORESOURCE_MEM,
276 .start = LUBBOCK_ETH_IRQ,
277 .end = LUBBOCK_ETH_IRQ,
278 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
281 .name = "smc91x-attrib",
284 .flags = IORESOURCE_MEM,
288 static struct smc91x_platdata lubbock_smc91x_info = {
289 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
292 static struct platform_device smc91x_device = {
295 .num_resources = ARRAY_SIZE(smc91x_resources),
296 .resource = smc91x_resources,
298 .platform_data = &lubbock_smc91x_info,
302 static struct resource flash_resources[] = {
306 .flags = IORESOURCE_MEM,
310 .end = 0x04000000 + SZ_64M - 1,
311 .flags = IORESOURCE_MEM,
315 static struct mtd_partition lubbock_partitions[] = {
317 .name = "Bootloader",
320 .mask_flags = MTD_WRITEABLE /* force read-only */
324 .offset = 0x00040000,
326 .name = "Filesystem",
327 .size = MTDPART_SIZ_FULL,
332 static struct flash_platform_data lubbock_flash_data[2] = {
334 .map_name = "cfi_probe",
335 .parts = lubbock_partitions,
336 .nr_parts = ARRAY_SIZE(lubbock_partitions),
338 .map_name = "cfi_probe",
344 static struct platform_device lubbock_flash_device[2] = {
346 .name = "pxa2xx-flash",
349 .platform_data = &lubbock_flash_data[0],
351 .resource = &flash_resources[0],
355 .name = "pxa2xx-flash",
358 .platform_data = &lubbock_flash_data[1],
360 .resource = &flash_resources[1],
365 static struct platform_device *devices[] __initdata = {
368 &lubbock_flash_device[0],
369 &lubbock_flash_device[1],
372 static struct pxafb_mode_info sharp_lm8v31_mode = {
383 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
387 static struct pxafb_mach_info sharp_lm8v31 = {
388 .modes = &sharp_lm8v31_mode,
392 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
393 LCD_AC_BIAS_FREQ(255),
396 #define MMC_POLL_RATE msecs_to_jiffies(1000)
398 static void lubbock_mmc_poll(unsigned long);
399 static irq_handler_t mmc_detect_int;
401 static struct timer_list mmc_timer = {
402 .function = lubbock_mmc_poll,
405 static void lubbock_mmc_poll(unsigned long data)
409 /* clear any previous irq state, then ... */
410 local_irq_save(flags);
411 LUB_IRQ_SET_CLR &= ~(1 << 0);
412 local_irq_restore(flags);
414 /* poll until mmc/sd card is removed */
415 if (LUB_IRQ_SET_CLR & (1 << 0))
416 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
418 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
419 enable_irq(LUBBOCK_SD_IRQ);
423 static irqreturn_t lubbock_detect_int(int irq, void *data)
425 /* IRQ is level triggered; disable, and poll for removal */
427 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
429 return mmc_detect_int(irq, data);
432 static int lubbock_mci_init(struct device *dev,
433 irq_handler_t detect_int,
436 /* detect card insert/eject */
437 mmc_detect_int = detect_int;
438 init_timer(&mmc_timer);
439 mmc_timer.data = (unsigned long) data;
440 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
441 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
444 static int lubbock_mci_get_ro(struct device *dev)
446 return (LUB_MISC_RD & (1 << 2)) != 0;
449 static void lubbock_mci_exit(struct device *dev, void *data)
451 free_irq(LUBBOCK_SD_IRQ, data);
452 del_timer_sync(&mmc_timer);
455 static struct pxamci_platform_data lubbock_mci_platform_data = {
456 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
458 .init = lubbock_mci_init,
459 .get_ro = lubbock_mci_get_ro,
460 .exit = lubbock_mci_exit,
463 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
467 local_irq_save(flags);
468 if (mode & IR_SIRMODE) {
469 LUB_MISC_WR &= ~(1 << 4);
470 } else if (mode & IR_FIRMODE) {
471 LUB_MISC_WR |= 1 << 4;
473 pxa2xx_transceiver_mode(dev, mode);
474 local_irq_restore(flags);
477 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
478 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
479 .transceiver_mode = lubbock_irda_transceiver_mode,
482 static void __init lubbock_init(void)
484 int flashboot = (LUB_CONF_SWITCHES & 1);
486 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
488 pxa_set_udc_info(&udc_info);
489 set_pxa_fb_info(&sharp_lm8v31);
490 pxa_set_mci_info(&lubbock_mci_platform_data);
491 pxa_set_ficp_info(&lubbock_ficp_platform_data);
492 pxa_set_ac97_info(NULL);
494 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
495 (BOOT_DEF & 1) ? 2 : 4;
496 /* Compensate for the nROMBT switch which swaps the flash banks */
497 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
498 flashboot?"Flash":"ROM", flashboot);
500 lubbock_flash_data[flashboot^1].name = "application-flash";
501 lubbock_flash_data[flashboot].name = "boot-rom";
502 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
504 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
505 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
508 static struct map_desc lubbock_io_desc[] __initdata = {
510 .virtual = LUBBOCK_FPGA_VIRT,
511 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
512 .length = 0x00100000,
517 static void __init lubbock_map_io(void)
520 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
525 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
526 /* Maintainer: MontaVista Software Inc. */
527 .phys_io = 0x40000000,
528 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
529 .map_io = lubbock_map_io,
530 .init_irq = lubbock_init_irq,
532 .init_machine = lubbock_init,