git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500pci.c

   1 /*
   2         Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500pci
  23         Abstract: rt2500pci device specific routines.
  24         Supported chipsets: RT2560.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/eeprom_93cx6.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00pci.h"
  37 #include "rt2500pci.h"
  38
  39 /*
  40  * Register access.
  41  * All access to the CSR registers will go through the methods
  42  * rt2x00pci_register_read and rt2x00pci_register_write.
  43  * BBP and RF register require indirect register access,
  44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  45  * These indirect registers work with busy bits,
  46  * and we will try maximal REGISTER_BUSY_COUNT times to access
  47  * the register while taking a REGISTER_BUSY_DELAY us delay
  48  * between each attampt. When the busy bit is still set at that time,
  49  * the access attempt is considered to have failed,
  50  * and we will print an error.
  51  */
  52 #define WAIT_FOR_BBP(__dev, __reg) \
  53         rt2x00pci_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg))
  54 #define WAIT_FOR_RF(__dev, __reg) \
  55         rt2x00pci_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg))
  56
  57 static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  58                                 const unsigned int word, const u8 value)
  59 {
  60         u32 reg;
  61
  62         mutex_lock(&rt2x00dev->csr_mutex);
  63
  64         /*
  65          * Wait until the BBP becomes available, afterwards we
  66          * can safely write the new data into the register.
  67          */
  68         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  69                 reg = 0;
  70                 rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
  71                 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  72                 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  73                 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
  74
  75                 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  76         }
  77
  78         mutex_unlock(&rt2x00dev->csr_mutex);
  79 }
  80
  81 static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  82                                const unsigned int word, u8 *value)
  83 {
  84         u32 reg;
  85
  86         mutex_lock(&rt2x00dev->csr_mutex);
  87
  88         /*
  89          * Wait until the BBP becomes available, afterwards we
  90          * can safely write the read request into the register.
  91          * After the data has been written, we wait until hardware
  92          * returns the correct value, if at any time the register
  93          * doesn't become available in time, reg will be 0xffffffff
  94          * which means we return 0xff to the caller.
  95          */
  96         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  97                 reg = 0;
  98                 rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  99                 rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
 100                 rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
 101
 102                 rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 103
 104                 WAIT_FOR_BBP(rt2x00dev, &reg);
 105         }
 106
 107         *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 108
 109         mutex_unlock(&rt2x00dev->csr_mutex);
 110 }
 111
 112 static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
 113                                const unsigned int word, const u32 value)
 114 {
 115         u32 reg;
 116
 117         if (!word)
 118                 return;
 119
 120         mutex_lock(&rt2x00dev->csr_mutex);
 121
 122         /*
 123          * Wait until the RF becomes available, afterwards we
 124          * can safely write the new data into the register.
 125          */
 126         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 127                 reg = 0;
 128                 rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 129                 rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
 130                 rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
 131                 rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
 132
 133                 rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 134                 rt2x00_rf_write(rt2x00dev, word, value);
 135         }
 136
 137         mutex_unlock(&rt2x00dev->csr_mutex);
 138 }
 139
 140 static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 141 {
 142         struct rt2x00_dev *rt2x00dev = eeprom->data;
 143         u32 reg;
 144
 145         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
 146
 147         eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
 148         eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
 149         eeprom->reg_data_clock =
 150             !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
 151         eeprom->reg_chip_select =
 152             !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
 153 }
 154
 155 static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 156 {
 157         struct rt2x00_dev *rt2x00dev = eeprom->data;
 158         u32 reg = 0;
 159
 160         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
 161         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
 162         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
 163                            !!eeprom->reg_data_clock);
 164         rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
 165                            !!eeprom->reg_chip_select);
 166
 167         rt2x00pci_register_write(rt2x00dev, CSR21, reg);
 168 }
 169
 170 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 171 static const struct rt2x00debug rt2500pci_rt2x00debug = {
 172         .owner  = THIS_MODULE,
 173         .csr    = {
 174                 .read           = rt2x00pci_register_read,
 175                 .write          = rt2x00pci_register_write,
 176                 .flags          = RT2X00DEBUGFS_OFFSET,
 177                 .word_base      = CSR_REG_BASE,
 178                 .word_size      = sizeof(u32),
 179                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 180         },
 181         .eeprom = {
 182                 .read           = rt2x00_eeprom_read,
 183                 .write          = rt2x00_eeprom_write,
 184                 .word_base      = EEPROM_BASE,
 185                 .word_size      = sizeof(u16),
 186                 .word_count     = EEPROM_SIZE / sizeof(u16),
 187         },
 188         .bbp    = {
 189                 .read           = rt2500pci_bbp_read,
 190                 .write          = rt2500pci_bbp_write,
 191                 .word_base      = BBP_BASE,
 192                 .word_size      = sizeof(u8),
 193                 .word_count     = BBP_SIZE / sizeof(u8),
 194         },
 195         .rf     = {
 196                 .read           = rt2x00_rf_read,
 197                 .write          = rt2500pci_rf_write,
 198                 .word_base      = RF_BASE,
 199                 .word_size      = sizeof(u32),
 200                 .word_count     = RF_SIZE / sizeof(u32),
 201         },
 202 };
 203 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 204
 205 #ifdef CONFIG_RT2X00_LIB_RFKILL
 206 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 207 {
 208         u32 reg;
 209
 210         rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 211         return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 212 }
 213 #else
 214 #define rt2500pci_rfkill_poll   NULL
 215 #endif /* CONFIG_RT2X00_LIB_RFKILL */
 216
 217 #ifdef CONFIG_RT2X00_LIB_LEDS
 218 static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
 219                                      enum led_brightness brightness)
 220 {
 221         struct rt2x00_led *led =
 222             container_of(led_cdev, struct rt2x00_led, led_dev);
 223         unsigned int enabled = brightness != LED_OFF;
 224         u32 reg;
 225
 226         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 227
 228         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 229                 rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
 230         else if (led->type == LED_TYPE_ACTIVITY)
 231                 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled);
 232
 233         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 234 }
 235
 236 static int rt2500pci_blink_set(struct led_classdev *led_cdev,
 237                                unsigned long *delay_on,
 238                                unsigned long *delay_off)
 239 {
 240         struct rt2x00_led *led =
 241             container_of(led_cdev, struct rt2x00_led, led_dev);
 242         u32 reg;
 243
 244         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 245         rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, *delay_on);
 246         rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, *delay_off);
 247         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 248
 249         return 0;
 250 }
 251
 252 static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev,
 253                                struct rt2x00_led *led,
 254                                enum led_type type)
 255 {
 256         led->rt2x00dev = rt2x00dev;
 257         led->type = type;
 258         led->led_dev.brightness_set = rt2500pci_brightness_set;
 259         led->led_dev.blink_set = rt2500pci_blink_set;
 260         led->flags = LED_INITIALIZED;
 261 }
 262 #endif /* CONFIG_RT2X00_LIB_LEDS */
 263
 264 /*
 265  * Configuration handlers.
 266  */
 267 static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev,
 268                                     const unsigned int filter_flags)
 269 {
 270         u32 reg;
 271
 272         /*
 273          * Start configuration steps.
 274          * Note that the version error will always be dropped
 275          * and broadcast frames will always be accepted since
 276          * there is no filter for it at this time.
 277          */
 278         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
 279         rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
 280                            !(filter_flags & FIF_FCSFAIL));
 281         rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
 282                            !(filter_flags & FIF_PLCPFAIL));
 283         rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
 284                            !(filter_flags & FIF_CONTROL));
 285         rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
 286                            !(filter_flags & FIF_PROMISC_IN_BSS));
 287         rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
 288                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 289                            !rt2x00dev->intf_ap_count);
 290         rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
 291         rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
 292                            !(filter_flags & FIF_ALLMULTI));
 293         rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
 294         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
 295 }
 296
 297 static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
 298                                   struct rt2x00_intf *intf,
 299                                   struct rt2x00intf_conf *conf,
 300                                   const unsigned int flags)
 301 {
 302         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON);
 303         unsigned int bcn_preload;
 304         u32 reg;
 305
 306         if (flags & CONFIG_UPDATE_TYPE) {
 307                 /*
 308                  * Enable beacon config
 309                  */
 310                 bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
 311                 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
 312                 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
 313                 rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN, queue->cw_min);
 314                 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
 315
 316                 /*
 317                  * Enable synchronisation.
 318                  */
 319                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 320                 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
 321                 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
 322                 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
 323                 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 324         }
 325
 326         if (flags & CONFIG_UPDATE_MAC)
 327                 rt2x00pci_register_multiwrite(rt2x00dev, CSR3,
 328                                               conf->mac, sizeof(conf->mac));
 329
 330         if (flags & CONFIG_UPDATE_BSSID)
 331                 rt2x00pci_register_multiwrite(rt2x00dev, CSR5,
 332                                               conf->bssid, sizeof(conf->bssid));
 333 }
 334
 335 static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 336                                  struct rt2x00lib_erp *erp)
 337 {
 338         int preamble_mask;
 339         u32 reg;
 340
 341         /*
 342          * When short preamble is enabled, we should set bit 0x08
 343          */
 344         preamble_mask = erp->short_preamble << 3;
 345
 346         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 347         rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
 348                            erp->ack_timeout);
 349         rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 350                            erp->ack_consume_time);
 351         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 352
 353         rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
 354         rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00);
 355         rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
 356         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 10));
 357         rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
 358
 359         rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
 360         rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
 361         rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
 362         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 20));
 363         rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
 364
 365         rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
 366         rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
 367         rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
 368         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 55));
 369         rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
 370
 371         rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
 372         rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
 373         rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
 374         rt2x00_set_field32(&reg, ARCSR2_LENGTH, GET_DURATION(ACK_SIZE, 110));
 375         rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
 376
 377         rt2x00pci_register_write(rt2x00dev, ARCSR1, erp->basic_rates);
 378
 379         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 380         rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
 381         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 382
 383         rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 384         rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
 385         rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
 386         rt2x00pci_register_write(rt2x00dev, CSR18, reg);
 387
 388         rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
 389         rt2x00_set_field32(&reg, CSR19_DIFS, erp->difs);
 390         rt2x00_set_field32(&reg, CSR19_EIFS, erp->eifs);
 391         rt2x00pci_register_write(rt2x00dev, CSR19, reg);
 392 }
 393
 394 static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
 395                                  struct antenna_setup *ant)
 396 {
 397         u32 reg;
 398         u8 r14;
 399         u8 r2;
 400
 401         /*
 402          * We should never come here because rt2x00lib is supposed
 403          * to catch this and send us the correct antenna explicitely.
 404          */
 405         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 406                ant->tx == ANTENNA_SW_DIVERSITY);
 407
 408         rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
 409         rt2500pci_bbp_read(rt2x00dev, 14, &r14);
 410         rt2500pci_bbp_read(rt2x00dev, 2, &r2);
 411
 412         /*
 413          * Configure the TX antenna.
 414          */
 415         switch (ant->tx) {
 416         case ANTENNA_A:
 417                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 418                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
 419                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
 420                 break;
 421         case ANTENNA_B:
 422         default:
 423                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 424                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
 425                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
 426                 break;
 427         }
 428
 429         /*
 430          * Configure the RX antenna.
 431          */
 432         switch (ant->rx) {
 433         case ANTENNA_A:
 434                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 435                 break;
 436         case ANTENNA_B:
 437         default:
 438                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 439                 break;
 440         }
 441
 442         /*
 443          * RT2525E and RT5222 need to flip TX I/Q
 444          */
 445         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 446             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 447                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 448                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
 449                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
 450
 451                 /*
 452                  * RT2525E does not need RX I/Q Flip.
 453                  */
 454                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 455                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 456         } else {
 457                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
 458                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
 459         }
 460
 461         rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
 462         rt2500pci_bbp_write(rt2x00dev, 14, r14);
 463         rt2500pci_bbp_write(rt2x00dev, 2, r2);
 464 }
 465
 466 static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
 467                                      struct rf_channel *rf, const int txpower)
 468 {
 469         u8 r70;
 470
 471         /*
 472          * Set TXpower.
 473          */
 474         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 475
 476         /*
 477          * Switch on tuning bits.
 478          * For RT2523 devices we do not need to update the R1 register.
 479          */
 480         if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
 481                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
 482         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 483
 484         /*
 485          * For RT2525 we should first set the channel to half band higher.
 486          */
 487         if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
 488                 static const u32 vals[] = {
 489                         0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
 490                         0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
 491                         0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
 492                         0x00080d2e, 0x00080d3a
 493                 };
 494
 495                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 496                 rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 497                 rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 498                 if (rf->rf4)
 499                         rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 500         }
 501
 502         rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 503         rt2500pci_rf_write(rt2x00dev, 2, rf->rf2);
 504         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 505         if (rf->rf4)
 506                 rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 507
 508         /*
 509          * Channel 14 requires the Japan filter bit to be set.
 510          */
 511         r70 = 0x46;
 512         rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14);
 513         rt2500pci_bbp_write(rt2x00dev, 70, r70);
 514
 515         msleep(1);
 516
 517         /*
 518          * Switch off tuning bits.
 519          * For RT2523 devices we do not need to update the R1 register.
 520          */
 521         if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
 522                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
 523                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 524         }
 525
 526         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
 527         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 528
 529         /*
 530          * Clear false CRC during channel switch.
 531          */
 532         rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
 533 }
 534
 535 static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 536                                      const int txpower)
 537 {
 538         u32 rf3;
 539
 540         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 541         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 542         rt2500pci_rf_write(rt2x00dev, 3, rf3);
 543 }
 544
 545 static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 546                                          struct rt2x00lib_conf *libconf)
 547 {
 548         u32 reg;
 549
 550         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 551         rt2x00_set_field32(&reg, CSR11_LONG_RETRY,
 552                            libconf->conf->long_frame_max_tx_count);
 553         rt2x00_set_field32(&reg, CSR11_SHORT_RETRY,
 554                            libconf->conf->short_frame_max_tx_count);
 555         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 556 }
 557
 558 static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
 559                                       struct rt2x00lib_conf *libconf)
 560 {
 561         u32 reg;
 562
 563         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 564         rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 565         rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 566         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 567
 568         rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
 569         rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
 570                            libconf->conf->beacon_int * 16);
 571         rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
 572                            libconf->conf->beacon_int * 16);
 573         rt2x00pci_register_write(rt2x00dev, CSR12, reg);
 574 }
 575
 576 static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
 577                                 struct rt2x00lib_conf *libconf)
 578 {
 579         enum dev_state state =
 580             (libconf->conf->flags & IEEE80211_CONF_PS) ?
 581                 STATE_SLEEP : STATE_AWAKE;
 582         u32 reg;
 583
 584         if (state == STATE_SLEEP) {
 585                 rt2x00pci_register_read(rt2x00dev, CSR20, &reg);
 586                 rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
 587                                    (libconf->conf->beacon_int - 20) * 16);
 588                 rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
 589                                    libconf->conf->listen_interval - 1);
 590
 591                 /* We must first disable autowake before it can be enabled */
 592                 rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 0);
 593                 rt2x00pci_register_write(rt2x00dev, CSR20, reg);
 594
 595                 rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 1);
 596                 rt2x00pci_register_write(rt2x00dev, CSR20, reg);
 597         }
 598
 599         rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
 600 }
 601
 602 static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
 603                              struct rt2x00lib_conf *libconf,
 604                              const unsigned int flags)
 605 {
 606         if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
 607                 rt2500pci_config_channel(rt2x00dev, &libconf->rf,
 608                                          libconf->conf->power_level);
 609         if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
 610             !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 611                 rt2500pci_config_txpower(rt2x00dev,
 612                                          libconf->conf->power_level);
 613         if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 614                 rt2500pci_config_retry_limit(rt2x00dev, libconf);
 615         if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
 616                 rt2500pci_config_duration(rt2x00dev, libconf);
 617         if (flags & IEEE80211_CONF_CHANGE_PS)
 618                 rt2500pci_config_ps(rt2x00dev, libconf);
 619 }
 620
 621 /*
 622  * Link tuning
 623  */
 624 static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev,
 625                                  struct link_qual *qual)
 626 {
 627         u32 reg;
 628
 629         /*
 630          * Update FCS error count from register.
 631          */
 632         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 633         qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
 634
 635         /*
 636          * Update False CCA count from register.
 637          */
 638         rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
 639         qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
 640 }
 641
 642 static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev,
 643                                      struct link_qual *qual, u8 vgc_level)
 644 {
 645         if (qual->vgc_level_reg != vgc_level) {
 646                 rt2500pci_bbp_write(rt2x00dev, 17, vgc_level);
 647                 qual->vgc_level_reg = vgc_level;
 648         }
 649 }
 650
 651 static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
 652                                   struct link_qual *qual)
 653 {
 654         rt2500pci_set_vgc(rt2x00dev, qual, 0x48);
 655 }
 656
 657 static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 658                                  struct link_qual *qual, const u32 count)
 659 {
 660         /*
 661          * To prevent collisions with MAC ASIC on chipsets
 662          * up to version C the link tuning should halt after 20
 663          * seconds while being associated.
 664          */
 665         if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
 666             rt2x00dev->intf_associated && count > 20)
 667                 return;
 668
 669         /*
 670          * Chipset versions C and lower should directly continue
 671          * to the dynamic CCA tuning. Chipset version D and higher
 672          * should go straight to dynamic CCA tuning when they
 673          * are not associated.
 674          */
 675         if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
 676             !rt2x00dev->intf_associated)
 677                 goto dynamic_cca_tune;
 678
 679         /*
 680          * A too low RSSI will cause too much false CCA which will
 681          * then corrupt the R17 tuning. To remidy this the tuning should
 682          * be stopped (While making sure the R17 value will not exceed limits)
 683          */
 684         if (qual->rssi < -80 && count > 20) {
 685                 if (qual->vgc_level_reg >= 0x41)
 686                         rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level);
 687                 return;
 688         }
 689
 690         /*
 691          * Special big-R17 for short distance
 692          */
 693         if (qual->rssi >= -58) {
 694                 rt2500pci_set_vgc(rt2x00dev, qual, 0x50);
 695                 return;
 696         }
 697
 698         /*
 699          * Special mid-R17 for middle distance
 700          */
 701         if (qual->rssi >= -74) {
 702                 rt2500pci_set_vgc(rt2x00dev, qual, 0x41);
 703                 return;
 704         }
 705
 706         /*
 707          * Leave short or middle distance condition, restore r17
 708          * to the dynamic tuning range.
 709          */
 710         if (qual->vgc_level_reg >= 0x41) {
 711                 rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level);
 712                 return;
 713         }
 714
 715 dynamic_cca_tune:
 716
 717         /*
 718          * R17 is inside the dynamic tuning range,
 719          * start tuning the link based on the false cca counter.
 720          */
 721         if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) {
 722                 rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg);
 723                 qual->vgc_level = qual->vgc_level_reg;
 724         } else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) {
 725                 rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg);
 726                 qual->vgc_level = qual->vgc_level_reg;
 727         }
 728 }
 729
 730 /*
 731  * Initialization functions.
 732  */
 733 static bool rt2500pci_get_entry_state(struct queue_entry *entry)
 734 {
 735         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 736         u32 word;
 737
 738         if (entry->queue->qid == QID_RX) {
 739                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 740
 741                 return rt2x00_get_field32(word, RXD_W0_OWNER_NIC);
 742         } else {
 743                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 744
 745                 return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
 746                         rt2x00_get_field32(word, TXD_W0_VALID));
 747         }
 748 }
 749
 750 static void rt2500pci_clear_entry(struct queue_entry *entry)
 751 {
 752         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 753         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 754         u32 word;
 755
 756         if (entry->queue->qid == QID_RX) {
 757                 rt2x00_desc_read(entry_priv->desc, 1, &word);
 758                 rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
 759                 rt2x00_desc_write(entry_priv->desc, 1, word);
 760
 761                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 762                 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
 763                 rt2x00_desc_write(entry_priv->desc, 0, word);
 764         } else {
 765                 rt2x00_desc_read(entry_priv->desc, 0, &word);
 766                 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
 767                 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
 768                 rt2x00_desc_write(entry_priv->desc, 0, word);
 769         }
 770 }
 771
 772 static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
 773 {
 774         struct queue_entry_priv_pci *entry_priv;
 775         u32 reg;
 776
 777         /*
 778          * Initialize registers.
 779          */
 780         rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
 781         rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
 782         rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
 783         rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit);
 784         rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
 785         rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
 786
 787         entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
 788         rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
 789         rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
 790                            entry_priv->desc_dma);
 791         rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
 792
 793         entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
 794         rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
 795         rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
 796                            entry_priv->desc_dma);
 797         rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
 798
 799         entry_priv = rt2x00dev->bcn[1].entries[0].priv_data;
 800         rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
 801         rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
 802                            entry_priv->desc_dma);
 803         rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
 804
 805         entry_priv = rt2x00dev->bcn[0].entries[0].priv_data;
 806         rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
 807         rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
 808                            entry_priv->desc_dma);
 809         rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
 810
 811         rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
 812         rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
 813         rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
 814         rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
 815
 816         entry_priv = rt2x00dev->rx->entries[0].priv_data;
 817         rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
 818         rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
 819                            entry_priv->desc_dma);
 820         rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
 821
 822         return 0;
 823 }
 824
 825 static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
 826 {
 827         u32 reg;
 828
 829         rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
 830         rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
 831         rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
 832         rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
 833
 834         rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
 835         rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
 836         rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
 837         rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
 838         rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
 839
 840         rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
 841         rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
 842                            rt2x00dev->rx->data_size / 128);
 843         rt2x00pci_register_write(rt2x00dev, CSR9, reg);
 844
 845         /*
 846          * Always use CWmin and CWmax set in descriptor.
 847          */
 848         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 849         rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
 850         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 851
 852         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 853         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
 854         rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
 855         rt2x00_set_field32(&reg, CSR14_TBCN, 0);
 856         rt2x00_set_field32(&reg, CSR14_TCFP, 0);
 857         rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
 858         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
 859         rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
 860         rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
 861         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 862
 863         rt2x00pci_register_write(rt2x00dev, CNT3, 0);
 864
 865         rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
 866         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
 867         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
 868         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
 869         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
 870         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
 871         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
 872         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
 873         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
 874         rt2x00pci_register_write(rt2x00dev, TXCSR8, reg);
 875
 876         rt2x00pci_register_read(rt2x00dev, ARTCSR0, &reg);
 877         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
 878         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
 879         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
 880         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
 881         rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg);
 882
 883         rt2x00pci_register_read(rt2x00dev, ARTCSR1, &reg);
 884         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
 885         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
 886         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
 887         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
 888         rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg);
 889
 890         rt2x00pci_register_read(rt2x00dev, ARTCSR2, &reg);
 891         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
 892         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
 893         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
 894         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
 895         rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg);
 896
 897         rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
 898         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
 899         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
 900         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
 901         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
 902         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
 903         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
 904         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
 905         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
 906         rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
 907
 908         rt2x00pci_register_read(rt2x00dev, PCICSR, &reg);
 909         rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
 910         rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
 911         rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
 912         rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
 913         rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
 914         rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
 915         rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
 916         rt2x00pci_register_write(rt2x00dev, PCICSR, reg);
 917
 918         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
 919
 920         rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
 921         rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
 922
 923         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 924                 return -EBUSY;
 925
 926         rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
 927         rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
 928
 929         rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
 930         rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
 931         rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
 932
 933         rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
 934         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
 935         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
 936         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
 937         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
 938         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
 939         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
 940         rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
 941
 942         rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
 943
 944         rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
 945
 946         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 947         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
 948         rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
 949         rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
 950         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 951
 952         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 953         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
 954         rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
 955         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 956
 957         /*
 958          * We must clear the FCS and FIFO error count.
 959          * These registers are cleared on read,
 960          * so we may pass a useless variable to store the value.
 961          */
 962         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 963         rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
 964
 965         return 0;
 966 }
 967
 968 static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
 969 {
 970         unsigned int i;
 971         u8 value;
 972
 973         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 974                 rt2500pci_bbp_read(rt2x00dev, 0, &value);
 975                 if ((value != 0xff) && (value != 0x00))
 976                         return 0;
 977                 udelay(REGISTER_BUSY_DELAY);
 978         }
 979
 980         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 981         return -EACCES;
 982 }
 983
 984 static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 985 {
 986         unsigned int i;
 987         u16 eeprom;
 988         u8 reg_id;
 989         u8 value;
 990
 991         if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev)))
 992                 return -EACCES;
 993
 994         rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
 995         rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
 996         rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
 997         rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
 998         rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
 999         rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
1000         rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
1001         rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
1002         rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
1003         rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
1004         rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
1005         rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
1006         rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
1007         rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
1008         rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
1009         rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
1010         rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
1011         rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
1012         rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
1013         rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
1014         rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
1015         rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
1016         rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
1017         rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
1018         rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
1019         rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
1020         rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
1021         rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
1022         rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
1023         rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
1024
1025         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1026                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1027
1028                 if (eeprom != 0xffff && eeprom != 0x0000) {
1029                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1030                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1031                         rt2500pci_bbp_write(rt2x00dev, reg_id, value);
1032                 }
1033         }
1034
1035         return 0;
1036 }
1037
1038 /*
1039  * Device state switch handlers.
1040  */
1041 static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1042                                 enum dev_state state)
1043 {
1044         u32 reg;
1045
1046         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1047         rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
1048                            (state == STATE_RADIO_RX_OFF) ||
1049                            (state == STATE_RADIO_RX_OFF_LINK));
1050         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1051 }
1052
1053 static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1054                                  enum dev_state state)
1055 {
1056         int mask = (state == STATE_RADIO_IRQ_OFF);
1057         u32 reg;
1058
1059         /*
1060          * When interrupts are being enabled, the interrupt registers
1061          * should clear the register to assure a clean state.
1062          */
1063         if (state == STATE_RADIO_IRQ_ON) {
1064                 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1065                 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1066         }
1067
1068         /*
1069          * Only toggle the interrupts bits we are going to use.
1070          * Non-checked interrupt bits are disabled by default.
1071          */
1072         rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1073         rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
1074         rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
1075         rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
1076         rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
1077         rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
1078         rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1079 }
1080
1081 static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1082 {
1083         /*
1084          * Initialize all registers.
1085          */
1086         if (unlikely(rt2500pci_init_queues(rt2x00dev) ||
1087                      rt2500pci_init_registers(rt2x00dev) ||
1088                      rt2500pci_init_bbp(rt2x00dev)))
1089                 return -EIO;
1090
1091         return 0;
1092 }
1093
1094 static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1095 {
1096         u32 reg;
1097
1098         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1099
1100         /*
1101          * Disable synchronisation.
1102          */
1103         rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1104
1105         /*
1106          * Cancel RX and TX.
1107          */
1108         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1109         rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1110         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1111 }
1112
1113 static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
1114                                enum dev_state state)
1115 {
1116         u32 reg;
1117         unsigned int i;
1118         char put_to_sleep;
1119         char bbp_state;
1120         char rf_state;
1121
1122         put_to_sleep = (state != STATE_AWAKE);
1123
1124         rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1125         rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1126         rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1127         rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1128         rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1129         rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1130
1131         /*
1132          * Device is not guaranteed to be in the requested state yet.
1133          * We must wait until the register indicates that the
1134          * device has entered the correct state.
1135          */
1136         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1137                 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1138                 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1139                 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1140                 if (bbp_state == state && rf_state == state)
1141                         return 0;
1142                 msleep(10);
1143         }
1144
1145         return -EBUSY;
1146 }
1147
1148 static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1149                                       enum dev_state state)
1150 {
1151         int retval = 0;
1152
1153         switch (state) {
1154         case STATE_RADIO_ON:
1155                 retval = rt2500pci_enable_radio(rt2x00dev);
1156                 break;
1157         case STATE_RADIO_OFF:
1158                 rt2500pci_disable_radio(rt2x00dev);
1159                 break;
1160         case STATE_RADIO_RX_ON:
1161         case STATE_RADIO_RX_ON_LINK:
1162         case STATE_RADIO_RX_OFF:
1163         case STATE_RADIO_RX_OFF_LINK:
1164                 rt2500pci_toggle_rx(rt2x00dev, state);
1165                 break;
1166         case STATE_RADIO_IRQ_ON:
1167         case STATE_RADIO_IRQ_OFF:
1168                 rt2500pci_toggle_irq(rt2x00dev, state);
1169                 break;
1170         case STATE_DEEP_SLEEP:
1171         case STATE_SLEEP:
1172         case STATE_STANDBY:
1173         case STATE_AWAKE:
1174                 retval = rt2500pci_set_state(rt2x00dev, state);
1175                 break;
1176         default:
1177                 retval = -ENOTSUPP;
1178                 break;
1179         }
1180
1181         if (unlikely(retval))
1182                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1183                       state, retval);
1184
1185         return retval;
1186 }
1187
1188 /*
1189  * TX descriptor initialization
1190  */
1191 static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1192                                     struct sk_buff *skb,
1193                                     struct txentry_desc *txdesc)
1194 {
1195         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1196         struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data;
1197         __le32 *txd = skbdesc->desc;
1198         u32 word;
1199
1200         /*
1201          * Start writing the descriptor words.
1202          */
1203         rt2x00_desc_read(entry_priv->desc, 1, &word);
1204         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
1205         rt2x00_desc_write(entry_priv->desc, 1, word);
1206
1207         rt2x00_desc_read(txd, 2, &word);
1208         rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
1209         rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs);
1210         rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min);
1211         rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max);
1212         rt2x00_desc_write(txd, 2, word);
1213
1214         rt2x00_desc_read(txd, 3, &word);
1215         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal);
1216         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service);
1217         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, txdesc->length_low);
1218         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, txdesc->length_high);
1219         rt2x00_desc_write(txd, 3, word);
1220
1221         rt2x00_desc_read(txd, 10, &word);
1222         rt2x00_set_field32(&word, TXD_W10_RTS,
1223                            test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
1224         rt2x00_desc_write(txd, 10, word);
1225
1226         rt2x00_desc_read(txd, 0, &word);
1227         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1228         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1229         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1230                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1231         rt2x00_set_field32(&word, TXD_W0_ACK,
1232                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1233         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1234                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1235         rt2x00_set_field32(&word, TXD_W0_OFDM,
1236                            (txdesc->rate_mode == RATE_MODE_OFDM));
1237         rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
1238         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1239         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1240                            test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
1241         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
1242         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1243         rt2x00_desc_write(txd, 0, word);
1244 }
1245
1246 /*
1247  * TX data initialization
1248  */
1249 static void rt2500pci_write_beacon(struct queue_entry *entry)
1250 {
1251         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1252         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1253         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1254         u32 word;
1255         u32 reg;
1256
1257         /*
1258          * Disable beaconing while we are reloading the beacon data,
1259          * otherwise we might be sending out invalid data.
1260          */
1261         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1262         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
1263         rt2x00_set_field32(&reg, CSR14_TBCN, 0);
1264         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
1265         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1266
1267         /*
1268          * Replace rt2x00lib allocated descriptor with the
1269          * pointer to the _real_ hardware descriptor.
1270          * After that, map the beacon to DMA and update the
1271          * descriptor.
1272          */
1273         memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len);
1274         skbdesc->desc = entry_priv->desc;
1275
1276         rt2x00queue_map_txskb(rt2x00dev, entry->skb);
1277
1278         rt2x00_desc_read(entry_priv->desc, 1, &word);
1279         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
1280         rt2x00_desc_write(entry_priv->desc, 1, word);
1281 }
1282
1283 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1284                                     const enum data_queue_qid queue)
1285 {
1286         u32 reg;
1287
1288         if (queue == QID_BEACON) {
1289                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1290                 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1291                         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
1292                         rt2x00_set_field32(&reg, CSR14_TBCN, 1);
1293                         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1294                         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1295                 }
1296                 return;
1297         }
1298
1299         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1300         rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
1301         rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue == QID_AC_BK));
1302         rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, (queue == QID_ATIM));
1303         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1304 }
1305
1306 /*
1307  * RX control handlers
1308  */
1309 static void rt2500pci_fill_rxdone(struct queue_entry *entry,
1310                                   struct rxdone_entry_desc *rxdesc)
1311 {
1312         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1313         u32 word0;
1314         u32 word2;
1315
1316         rt2x00_desc_read(entry_priv->desc, 0, &word0);
1317         rt2x00_desc_read(entry_priv->desc, 2, &word2);
1318
1319         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1320                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1321         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1322                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1323
1324         /*
1325          * Obtain the status about this packet.
1326          * When frame was received with an OFDM bitrate,
1327          * the signal is the PLCP value. If it was received with
1328          * a CCK bitrate the signal is the rate in 100kbit/s.
1329          */
1330         rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1331         rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1332             entry->queue->rt2x00dev->rssi_offset;
1333         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1334
1335         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1336                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1337         else
1338                 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
1339         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1340                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1341 }
1342
1343 /*
1344  * Interrupt functions.
1345  */
1346 static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
1347                              const enum data_queue_qid queue_idx)
1348 {
1349         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
1350         struct queue_entry_priv_pci *entry_priv;
1351         struct queue_entry *entry;
1352         struct txdone_entry_desc txdesc;
1353         u32 word;
1354
1355         while (!rt2x00queue_empty(queue)) {
1356                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1357                 entry_priv = entry->priv_data;
1358                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1359
1360                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1361                     !rt2x00_get_field32(word, TXD_W0_VALID))
1362                         break;
1363
1364                 /*
1365                  * Obtain the status about this packet.
1366                  */
1367                 txdesc.flags = 0;
1368                 switch (rt2x00_get_field32(word, TXD_W0_RESULT)) {
1369                 case 0: /* Success */
1370                 case 1: /* Success with retry */
1371                         __set_bit(TXDONE_SUCCESS, &txdesc.flags);
1372                         break;
1373                 case 2: /* Failure, excessive retries */
1374                         __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
1375                         /* Don't break, this is a failed frame! */
1376                 default: /* Failure */
1377                         __set_bit(TXDONE_FAILURE, &txdesc.flags);
1378                 }
1379                 txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1380
1381                 rt2x00lib_txdone(entry, &txdesc);
1382         }
1383 }
1384
1385 static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
1386 {
1387         struct rt2x00_dev *rt2x00dev = dev_instance;
1388         u32 reg;
1389
1390         /*
1391          * Get the interrupt sources & saved to local variable.
1392          * Write register value back to clear pending interrupts.
1393          */
1394         rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1395         rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1396
1397         if (!reg)
1398                 return IRQ_NONE;
1399
1400         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
1401                 return IRQ_HANDLED;
1402
1403         /*
1404          * Handle interrupts, walk through all bits
1405          * and run the tasks, the bits are checked in order of
1406          * priority.
1407          */
1408
1409         /*
1410          * 1 - Beacon timer expired interrupt.
1411          */
1412         if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1413                 rt2x00lib_beacondone(rt2x00dev);
1414
1415         /*
1416          * 2 - Rx ring done interrupt.
1417          */
1418         if (rt2x00_get_field32(reg, CSR7_RXDONE))
1419                 rt2x00pci_rxdone(rt2x00dev);
1420
1421         /*
1422          * 3 - Atim ring transmit done interrupt.
1423          */
1424         if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1425                 rt2500pci_txdone(rt2x00dev, QID_ATIM);
1426
1427         /*
1428          * 4 - Priority ring transmit done interrupt.
1429          */
1430         if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1431                 rt2500pci_txdone(rt2x00dev, QID_AC_BE);
1432
1433         /*
1434          * 5 - Tx ring transmit done interrupt.
1435          */
1436         if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1437                 rt2500pci_txdone(rt2x00dev, QID_AC_BK);
1438
1439         return IRQ_HANDLED;
1440 }
1441
1442 /*
1443  * Device probe functions.
1444  */
1445 static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1446 {
1447         struct eeprom_93cx6 eeprom;
1448         u32 reg;
1449         u16 word;
1450         u8 *mac;
1451
1452         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1453
1454         eeprom.data = rt2x00dev;
1455         eeprom.register_read = rt2500pci_eepromregister_read;
1456         eeprom.register_write = rt2500pci_eepromregister_write;
1457         eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1458             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1459         eeprom.reg_data_in = 0;
1460         eeprom.reg_data_out = 0;
1461         eeprom.reg_data_clock = 0;
1462         eeprom.reg_chip_select = 0;
1463
1464         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1465                                EEPROM_SIZE / sizeof(u16));
1466
1467         /*
1468          * Start validation of the data that has been read.
1469          */
1470         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1471         if (!is_valid_ether_addr(mac)) {
1472                 random_ether_addr(mac);
1473                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
1474         }
1475
1476         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1477         if (word == 0xffff) {
1478                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1479                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1480                                    ANTENNA_SW_DIVERSITY);
1481                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1482                                    ANTENNA_SW_DIVERSITY);
1483                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1484                                    LED_MODE_DEFAULT);
1485                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1486                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1487                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1488                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1489                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1490         }
1491
1492         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1493         if (word == 0xffff) {
1494                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1495                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1496                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1497                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1498                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1499         }
1500
1501         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1502         if (word == 0xffff) {
1503                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1504                                    DEFAULT_RSSI_OFFSET);
1505                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1506                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1507         }
1508
1509         return 0;
1510 }
1511
1512 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1513 {
1514         u32 reg;
1515         u16 value;
1516         u16 eeprom;
1517
1518         /*
1519          * Read EEPROM word for configuration.
1520          */
1521         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1522
1523         /*
1524          * Identify RF chipset.
1525          */
1526         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1527         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1528         rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
1529
1530         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1531             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1532             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1533             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1534             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1535             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1536                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1537                 return -ENODEV;
1538         }
1539
1540         /*
1541          * Identify default antenna configuration.
1542          */
1543         rt2x00dev->default_ant.tx =
1544             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1545         rt2x00dev->default_ant.rx =
1546             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1547
1548         /*
1549          * Store led mode, for correct led behaviour.
1550          */
1551 #ifdef CONFIG_RT2X00_LIB_LEDS
1552         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1553
1554         rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1555         if (value == LED_MODE_TXRX_ACTIVITY ||
1556             value == LED_MODE_DEFAULT ||
1557             value == LED_MODE_ASUS)
1558                 rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
1559                                    LED_TYPE_ACTIVITY);
1560 #endif /* CONFIG_RT2X00_LIB_LEDS */
1561
1562         /*
1563          * Detect if this device has an hardware controlled radio.
1564          */
1565 #ifdef CONFIG_RT2X00_LIB_RFKILL
1566         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1567                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1568 #endif /* CONFIG_RT2X00_LIB_RFKILL */
1569
1570         /*
1571          * Check if the BBP tuning should be enabled.
1572          */
1573         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1574
1575         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1576                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1577
1578         /*
1579          * Read the RSSI <-> dBm offset information.
1580          */
1581         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1582         rt2x00dev->rssi_offset =
1583             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1584
1585         return 0;
1586 }
1587
1588 /*
1589  * RF value list for RF2522
1590  * Supports: 2.4 GHz
1591  */
1592 static const struct rf_channel rf_vals_bg_2522[] = {
1593         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1594         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1595         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1596         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1597         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1598         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1599         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1600         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1601         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1602         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1603         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1604         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1605         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1606         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1607 };
1608
1609 /*
1610  * RF value list for RF2523
1611  * Supports: 2.4 GHz
1612  */
1613 static const struct rf_channel rf_vals_bg_2523[] = {
1614         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1615         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1616         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1617         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1618         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1619         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1620         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1621         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1622         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1623         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1624         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1625         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1626         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1627         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1628 };
1629
1630 /*
1631  * RF value list for RF2524
1632  * Supports: 2.4 GHz
1633  */
1634 static const struct rf_channel rf_vals_bg_2524[] = {
1635         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1636         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1637         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1638         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1639         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1640         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1641         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1642         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1643         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1644         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1645         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1646         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1647         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1648         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1649 };
1650
1651 /*
1652  * RF value list for RF2525
1653  * Supports: 2.4 GHz
1654  */
1655 static const struct rf_channel rf_vals_bg_2525[] = {
1656         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1657         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1658         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1659         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1660         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1661         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1662         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1663         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1664         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1665         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1666         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1667         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1668         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1669         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1670 };
1671
1672 /*
1673  * RF value list for RF2525e
1674  * Supports: 2.4 GHz
1675  */
1676 static const struct rf_channel rf_vals_bg_2525e[] = {
1677         { 1,  0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
1678         { 2,  0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
1679         { 3,  0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
1680         { 4,  0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
1681         { 5,  0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
1682         { 6,  0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
1683         { 7,  0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
1684         { 8,  0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
1685         { 9,  0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
1686         { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
1687         { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
1688         { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
1689         { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
1690         { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
1691 };
1692
1693 /*
1694  * RF value list for RF5222
1695  * Supports: 2.4 GHz & 5.2 GHz
1696  */
1697 static const struct rf_channel rf_vals_5222[] = {
1698         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1699         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1700         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1701         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1702         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1703         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1704         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1705         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1706         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1707         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1708         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1709         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1710         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1711         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1712
1713         /* 802.11 UNI / HyperLan 2 */
1714         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1715         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1716         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1717         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1718         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1719         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1720         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1721         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1722
1723         /* 802.11 HyperLan 2 */
1724         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1725         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1726         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1727         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1728         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1729         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1730         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1731         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1732         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1733         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1734
1735         /* 802.11 UNII */
1736         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1737         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1738         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1739         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1740         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1741 };
1742
1743 static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1744 {
1745         struct hw_mode_spec *spec = &rt2x00dev->spec;
1746         struct channel_info *info;
1747         char *tx_power;
1748         unsigned int i;
1749
1750         /*
1751          * Initialize all hw fields.
1752          */
1753         rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
1754                                IEEE80211_HW_SIGNAL_DBM |
1755                                IEEE80211_HW_SUPPORTS_PS |
1756                                IEEE80211_HW_PS_NULLFUNC_STACK;
1757
1758         rt2x00dev->hw->extra_tx_headroom = 0;
1759
1760         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
1761         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1762                                 rt2x00_eeprom_addr(rt2x00dev,
1763                                                    EEPROM_MAC_ADDR_0));
1764
1765         /*
1766          * Initialize hw_mode information.
1767          */
1768         spec->supported_bands = SUPPORT_BAND_2GHZ;
1769         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1770
1771         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1772                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1773                 spec->channels = rf_vals_bg_2522;
1774         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1775                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1776                 spec->channels = rf_vals_bg_2523;
1777         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1778                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1779                 spec->channels = rf_vals_bg_2524;
1780         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1781                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1782                 spec->channels = rf_vals_bg_2525;
1783         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1784                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1785                 spec->channels = rf_vals_bg_2525e;
1786         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1787                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1788                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1789                 spec->channels = rf_vals_5222;
1790         }
1791
1792         /*
1793          * Create channel information array
1794          */
1795         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
1796         if (!info)
1797                 return -ENOMEM;
1798
1799         spec->channels_info = info;
1800
1801         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1802         for (i = 0; i < 14; i++)
1803                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
1804
1805         if (spec->num_channels > 14) {
1806                 for (i = 14; i < spec->num_channels; i++)
1807                         info[i].tx_power1 = DEFAULT_TXPOWER;
1808         }
1809
1810         return 0;
1811 }
1812
1813 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1814 {
1815         int retval;
1816
1817         /*
1818          * Allocate eeprom data.
1819          */
1820         retval = rt2500pci_validate_eeprom(rt2x00dev);
1821         if (retval)
1822                 return retval;
1823
1824         retval = rt2500pci_init_eeprom(rt2x00dev);
1825         if (retval)
1826                 return retval;
1827
1828         /*
1829          * Initialize hw specifications.
1830          */
1831         retval = rt2500pci_probe_hw_mode(rt2x00dev);
1832         if (retval)
1833                 return retval;
1834
1835         /*
1836          * This device requires the atim queue and DMA-mapped skbs.
1837          */
1838         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1839         __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
1840
1841         /*
1842          * Set the rssi offset.
1843          */
1844         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1845
1846         return 0;
1847 }
1848
1849 /*
1850  * IEEE80211 stack callback functions.
1851  */
1852 static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
1853 {
1854         struct rt2x00_dev *rt2x00dev = hw->priv;
1855         u64 tsf;
1856         u32 reg;
1857
1858         rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1859         tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1860         rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1861         tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1862
1863         return tsf;
1864 }
1865
1866 static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
1867 {
1868         struct rt2x00_dev *rt2x00dev = hw->priv;
1869         u32 reg;
1870
1871         rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1872         return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1873 }
1874
1875 static const struct ieee80211_ops rt2500pci_mac80211_ops = {
1876         .tx                     = rt2x00mac_tx,
1877         .start                  = rt2x00mac_start,
1878         .stop                   = rt2x00mac_stop,
1879         .add_interface          = rt2x00mac_add_interface,
1880         .remove_interface       = rt2x00mac_remove_interface,
1881         .config                 = rt2x00mac_config,
1882         .config_interface       = rt2x00mac_config_interface,
1883         .configure_filter       = rt2x00mac_configure_filter,
1884         .get_stats              = rt2x00mac_get_stats,
1885         .bss_info_changed       = rt2x00mac_bss_info_changed,
1886         .conf_tx                = rt2x00mac_conf_tx,
1887         .get_tx_stats           = rt2x00mac_get_tx_stats,
1888         .get_tsf                = rt2500pci_get_tsf,
1889         .tx_last_beacon         = rt2500pci_tx_last_beacon,
1890 };
1891
1892 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
1893         .irq_handler            = rt2500pci_interrupt,
1894         .probe_hw               = rt2500pci_probe_hw,
1895         .initialize             = rt2x00pci_initialize,
1896         .uninitialize           = rt2x00pci_uninitialize,
1897         .get_entry_state        = rt2500pci_get_entry_state,
1898         .clear_entry            = rt2500pci_clear_entry,
1899         .set_device_state       = rt2500pci_set_device_state,
1900         .rfkill_poll            = rt2500pci_rfkill_poll,
1901         .link_stats             = rt2500pci_link_stats,
1902         .reset_tuner            = rt2500pci_reset_tuner,
1903         .link_tuner             = rt2500pci_link_tuner,
1904         .write_tx_desc          = rt2500pci_write_tx_desc,
1905         .write_tx_data          = rt2x00pci_write_tx_data,
1906         .write_beacon           = rt2500pci_write_beacon,
1907         .kick_tx_queue          = rt2500pci_kick_tx_queue,
1908         .fill_rxdone            = rt2500pci_fill_rxdone,
1909         .config_filter          = rt2500pci_config_filter,
1910         .config_intf            = rt2500pci_config_intf,
1911         .config_erp             = rt2500pci_config_erp,
1912         .config_ant             = rt2500pci_config_ant,
1913         .config                 = rt2500pci_config,
1914 };
1915
1916 static const struct data_queue_desc rt2500pci_queue_rx = {
1917         .entry_num              = RX_ENTRIES,
1918         .data_size              = DATA_FRAME_SIZE,
1919         .desc_size              = RXD_DESC_SIZE,
1920         .priv_size              = sizeof(struct queue_entry_priv_pci),
1921 };
1922
1923 static const struct data_queue_desc rt2500pci_queue_tx = {
1924         .entry_num              = TX_ENTRIES,
1925         .data_size              = DATA_FRAME_SIZE,
1926         .desc_size              = TXD_DESC_SIZE,
1927         .priv_size              = sizeof(struct queue_entry_priv_pci),
1928 };
1929
1930 static const struct data_queue_desc rt2500pci_queue_bcn = {
1931         .entry_num              = BEACON_ENTRIES,
1932         .data_size              = MGMT_FRAME_SIZE,
1933         .desc_size              = TXD_DESC_SIZE,
1934         .priv_size              = sizeof(struct queue_entry_priv_pci),
1935 };
1936
1937 static const struct data_queue_desc rt2500pci_queue_atim = {
1938         .entry_num              = ATIM_ENTRIES,
1939         .data_size              = DATA_FRAME_SIZE,
1940         .desc_size              = TXD_DESC_SIZE,
1941         .priv_size              = sizeof(struct queue_entry_priv_pci),
1942 };
1943
1944 static const struct rt2x00_ops rt2500pci_ops = {
1945         .name           = KBUILD_MODNAME,
1946         .max_sta_intf   = 1,
1947         .max_ap_intf    = 1,
1948         .eeprom_size    = EEPROM_SIZE,
1949         .rf_size        = RF_SIZE,
1950         .tx_queues      = NUM_TX_QUEUES,
1951         .rx             = &rt2500pci_queue_rx,
1952         .tx             = &rt2500pci_queue_tx,
1953         .bcn            = &rt2500pci_queue_bcn,
1954         .atim           = &rt2500pci_queue_atim,
1955         .lib            = &rt2500pci_rt2x00_ops,
1956         .hw             = &rt2500pci_mac80211_ops,
1957 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1958         .debugfs        = &rt2500pci_rt2x00debug,
1959 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1960 };
1961
1962 /*
1963  * RT2500pci module information.
1964  */
1965 static struct pci_device_id rt2500pci_device_table[] = {
1966         { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
1967         { 0, }
1968 };
1969
1970 MODULE_AUTHOR(DRV_PROJECT);
1971 MODULE_VERSION(DRV_VERSION);
1972 MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
1973 MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
1974 MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
1975 MODULE_LICENSE("GPL");
1976
1977 static struct pci_driver rt2500pci_driver = {
1978         .name           = KBUILD_MODNAME,
1979         .id_table       = rt2500pci_device_table,
1980         .probe          = rt2x00pci_probe,
1981         .remove         = __devexit_p(rt2x00pci_remove),
1982         .suspend        = rt2x00pci_suspend,
1983         .resume         = rt2x00pci_resume,
1984 };
1985
1986 static int __init rt2500pci_init(void)
1987 {
1988         return pci_register_driver(&rt2500pci_driver);
1989 }
1990
1991 static void __exit rt2500pci_exit(void)
1992 {
1993         pci_unregister_driver(&rt2500pci_driver);
1994 }
1995
1996 module_init(rt2500pci_init);
1997 module_exit(rt2500pci_exit);