Merge master.kernel.org:/home/rmk/linux-2.6-arm
[linux-2.6] / arch / arm / plat-omap / pm.c
1 /*
2  * linux/arch/arm/plat-omap/pm.c
3  *
4  * OMAP Power Management Routines
5  *
6  * Original code for the SA11x0:
7  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
8  *
9  * Modified for the PXA250 by Nicolas Pitre:
10  * Copyright (c) 2002 Monta Vista Software, Inc.
11  *
12  * Modified for the OMAP1510 by David Singleton:
13  * Copyright (c) 2002 Monta Vista Software, Inc.
14  *
15  * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
16  *
17  * This program is free software; you can redistribute it and/or modify it
18  * under the terms of the GNU General Public License as published by the
19  * Free Software Foundation; either version 2 of the License, or (at your
20  * option) any later version.
21  *
22  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  * You should have received a copy of the GNU General Public License along
34  * with this program; if not, write to the Free Software Foundation, Inc.,
35  * 675 Mass Ave, Cambridge, MA 02139, USA.
36  */
37
38 #include <linux/pm.h>
39 #include <linux/sched.h>
40 #include <linux/proc_fs.h>
41 #include <linux/pm.h>
42 #include <linux/interrupt.h>
43
44 #include <asm/io.h>
45 #include <asm/irq.h>
46 #include <asm/mach/time.h>
47 #include <asm/mach/irq.h>
48
49 #include <asm/mach-types.h>
50 #include <asm/arch/irqs.h>
51 #include <asm/arch/tc.h>
52 #include <asm/arch/pm.h>
53 #include <asm/arch/mux.h>
54 #include <asm/arch/tps65010.h>
55 #include <asm/arch/dsp_common.h>
56
57 #include <asm/arch/clock.h>
58 #include <asm/arch/sram.h>
59
60 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
61 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
62 static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
63 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
64 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
65
66 static void (*omap_sram_idle)(void) = NULL;
67 static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
68
69 /*
70  * Let's power down on idle, but only if we are really
71  * idle, because once we start down the path of
72  * going idle we continue to do idle even if we get
73  * a clock tick interrupt . .
74  */
75 void omap_pm_idle(void)
76 {
77         unsigned int mask32 = 0;
78
79         /*
80          * If the DSP is being used let's just idle the CPU, the overhead
81          * to wake up from Big Sleep is big, milliseconds versus micro
82          * seconds for wait for interrupt.
83          */
84
85         local_irq_disable();
86         local_fiq_disable();
87         if (need_resched()) {
88                 local_fiq_enable();
89                 local_irq_enable();
90                 return;
91         }
92         mask32 = omap_readl(ARM_SYSST);
93
94         /*
95          * Prevent the ULPD from entering low power state by setting
96          * POWER_CTRL_REG:4 = 0
97          */
98         omap_writew(omap_readw(ULPD_POWER_CTRL) &
99                     ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL);
100
101         /*
102          * Since an interrupt may set up a timer, we don't want to
103          * reprogram the hardware timer with interrupts enabled.
104          * Re-enable interrupts only after returning from idle.
105          */
106         timer_dyn_reprogram();
107
108         if ((mask32 & DSP_IDLE) == 0) {
109                 __asm__ volatile ("mcr  p15, 0, r0, c7, c0, 4");
110         } else
111                 omap_sram_idle();
112
113         local_fiq_enable();
114         local_irq_enable();
115 }
116
117 /*
118  * Configuration of the wakeup event is board specific. For the
119  * moment we put it into this helper function. Later it may move
120  * to board specific files.
121  */
122 static void omap_pm_wakeup_setup(void)
123 {
124         u32 level1_wake = 0;
125         u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
126
127         /*
128          * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
129          * and the L2 wakeup interrupts: keypad and UART2. Note that the
130          * drivers must still separately call omap_set_gpio_wakeup() to
131          * wake up to a GPIO interrupt.
132          */
133         if (cpu_is_omap730())
134                 level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
135                         OMAP_IRQ_BIT(INT_730_IH2_IRQ);
136         else if (cpu_is_omap1510())
137                 level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
138                         OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
139         else if (cpu_is_omap16xx())
140                 level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
141                         OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
142
143         omap_writel(~level1_wake, OMAP_IH1_MIR);
144
145         if (cpu_is_omap730()) {
146                 omap_writel(~level2_wake, OMAP_IH2_0_MIR);
147                 omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), OMAP_IH2_1_MIR);
148         } else if (cpu_is_omap1510()) {
149                 level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
150                 omap_writel(~level2_wake,  OMAP_IH2_MIR);
151         } else if (cpu_is_omap16xx()) {
152                 level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
153                 omap_writel(~level2_wake, OMAP_IH2_0_MIR);
154
155                 /* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
156                 omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
157                 omap_writel(~0x0, OMAP_IH2_2_MIR);
158                 omap_writel(~0x0, OMAP_IH2_3_MIR);
159         }
160
161         /*  New IRQ agreement, recalculate in cascade order */
162         omap_writel(1, OMAP_IH2_CONTROL);
163         omap_writel(1, OMAP_IH1_CONTROL);
164 }
165
166 void omap_pm_suspend(void)
167 {
168         unsigned long arg0 = 0, arg1 = 0;
169
170         printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
171
172         omap_serial_wake_trigger(1);
173
174         if (machine_is_omap_osk()) {
175                 /* Stop LED1 (D9) blink */
176                 tps65010_set_led(LED1, OFF);
177         }
178
179         omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
180
181         /*
182          * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
183          */
184
185         local_irq_disable();
186         local_fiq_disable();
187
188         /*
189          * Step 2: save registers
190          *
191          * The omap is a strange/beautiful device. The caches, memory
192          * and register state are preserved across power saves.
193          * We have to save and restore very little register state to
194          * idle the omap.
195          *
196          * Save interrupt, MPUI, ARM and UPLD control registers.
197          */
198
199         if (cpu_is_omap730()) {
200                 MPUI730_SAVE(OMAP_IH1_MIR);
201                 MPUI730_SAVE(OMAP_IH2_0_MIR);
202                 MPUI730_SAVE(OMAP_IH2_1_MIR);
203                 MPUI730_SAVE(MPUI_CTRL);
204                 MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
205                 MPUI730_SAVE(MPUI_DSP_API_CONFIG);
206                 MPUI730_SAVE(EMIFS_CONFIG);
207                 MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
208
209         } else if (cpu_is_omap1510()) {
210                 MPUI1510_SAVE(OMAP_IH1_MIR);
211                 MPUI1510_SAVE(OMAP_IH2_MIR);
212                 MPUI1510_SAVE(MPUI_CTRL);
213                 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
214                 MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
215                 MPUI1510_SAVE(EMIFS_CONFIG);
216                 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
217         } else if (cpu_is_omap16xx()) {
218                 MPUI1610_SAVE(OMAP_IH1_MIR);
219                 MPUI1610_SAVE(OMAP_IH2_0_MIR);
220                 MPUI1610_SAVE(OMAP_IH2_1_MIR);
221                 MPUI1610_SAVE(OMAP_IH2_2_MIR);
222                 MPUI1610_SAVE(OMAP_IH2_3_MIR);
223                 MPUI1610_SAVE(MPUI_CTRL);
224                 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
225                 MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
226                 MPUI1610_SAVE(EMIFS_CONFIG);
227                 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
228         }
229
230         ARM_SAVE(ARM_CKCTL);
231         ARM_SAVE(ARM_IDLECT1);
232         ARM_SAVE(ARM_IDLECT2);
233         if (!(cpu_is_omap1510()))
234                 ARM_SAVE(ARM_IDLECT3);
235         ARM_SAVE(ARM_EWUPCT);
236         ARM_SAVE(ARM_RSTCT1);
237         ARM_SAVE(ARM_RSTCT2);
238         ARM_SAVE(ARM_SYSST);
239         ULPD_SAVE(ULPD_CLOCK_CTRL);
240         ULPD_SAVE(ULPD_STATUS_REQ);
241
242         /* (Step 3 removed - we now allow deep sleep by default) */
243
244         /*
245          * Step 4: OMAP DSP Shutdown
246          */
247
248
249         /*
250          * Step 5: Wakeup Event Setup
251          */
252
253         omap_pm_wakeup_setup();
254
255         /*
256          * Step 6: ARM and Traffic controller shutdown
257          */
258
259         /* disable ARM watchdog */
260         omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
261         omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
262
263         /*
264          * Step 6b: ARM and Traffic controller shutdown
265          *
266          * Step 6 continues here. Prepare jump to power management
267          * assembly code in internal SRAM.
268          *
269          * Since the omap_cpu_suspend routine has been copied to
270          * SRAM, we'll do an indirect procedure call to it and pass the
271          * contents of arm_idlect1 and arm_idlect2 so it can restore
272          * them when it wakes up and it will return.
273          */
274
275         arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
276         arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
277
278         /*
279          * Step 6c: ARM and Traffic controller shutdown
280          *
281          * Jump to assembly code. The processor will stay there
282          * until wake up.
283          */
284         omap_sram_suspend(arg0, arg1);
285
286         /*
287          * If we are here, processor is woken up!
288          */
289
290         /*
291          * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
292          */
293
294         if (!(cpu_is_omap1510()))
295                 ARM_RESTORE(ARM_IDLECT3);
296         ARM_RESTORE(ARM_CKCTL);
297         ARM_RESTORE(ARM_EWUPCT);
298         ARM_RESTORE(ARM_RSTCT1);
299         ARM_RESTORE(ARM_RSTCT2);
300         ARM_RESTORE(ARM_SYSST);
301         ULPD_RESTORE(ULPD_CLOCK_CTRL);
302         ULPD_RESTORE(ULPD_STATUS_REQ);
303
304         if (cpu_is_omap730()) {
305                 MPUI730_RESTORE(EMIFS_CONFIG);
306                 MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
307                 MPUI730_RESTORE(OMAP_IH1_MIR);
308                 MPUI730_RESTORE(OMAP_IH2_0_MIR);
309                 MPUI730_RESTORE(OMAP_IH2_1_MIR);
310         } else if (cpu_is_omap1510()) {
311                 MPUI1510_RESTORE(MPUI_CTRL);
312                 MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
313                 MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
314                 MPUI1510_RESTORE(EMIFS_CONFIG);
315                 MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
316                 MPUI1510_RESTORE(OMAP_IH1_MIR);
317                 MPUI1510_RESTORE(OMAP_IH2_MIR);
318         } else if (cpu_is_omap16xx()) {
319                 MPUI1610_RESTORE(MPUI_CTRL);
320                 MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
321                 MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
322                 MPUI1610_RESTORE(EMIFS_CONFIG);
323                 MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
324
325                 MPUI1610_RESTORE(OMAP_IH1_MIR);
326                 MPUI1610_RESTORE(OMAP_IH2_0_MIR);
327                 MPUI1610_RESTORE(OMAP_IH2_1_MIR);
328                 MPUI1610_RESTORE(OMAP_IH2_2_MIR);
329                 MPUI1610_RESTORE(OMAP_IH2_3_MIR);
330         }
331
332         omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
333
334         /*
335          * Reenable interrupts
336          */
337
338         local_irq_enable();
339         local_fiq_enable();
340
341         omap_serial_wake_trigger(0);
342
343         printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
344
345         if (machine_is_omap_osk()) {
346                 /* Let LED1 (D9) blink again */
347                 tps65010_set_led(LED1, BLINK);
348         }
349 }
350
351 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
352 static int g_read_completed;
353
354 /*
355  * Read system PM registers for debugging
356  */
357 static int omap_pm_read_proc(
358         char *page_buffer,
359         char **my_first_byte,
360         off_t virtual_start,
361         int length,
362         int *eof,
363         void *data)
364 {
365         int my_buffer_offset = 0;
366         char * const my_base = page_buffer;
367
368         ARM_SAVE(ARM_CKCTL);
369         ARM_SAVE(ARM_IDLECT1);
370         ARM_SAVE(ARM_IDLECT2);
371         if (!(cpu_is_omap1510()))
372                 ARM_SAVE(ARM_IDLECT3);
373         ARM_SAVE(ARM_EWUPCT);
374         ARM_SAVE(ARM_RSTCT1);
375         ARM_SAVE(ARM_RSTCT2);
376         ARM_SAVE(ARM_SYSST);
377
378         ULPD_SAVE(ULPD_IT_STATUS);
379         ULPD_SAVE(ULPD_CLOCK_CTRL);
380         ULPD_SAVE(ULPD_SOFT_REQ);
381         ULPD_SAVE(ULPD_STATUS_REQ);
382         ULPD_SAVE(ULPD_DPLL_CTRL);
383         ULPD_SAVE(ULPD_POWER_CTRL);
384
385         if (cpu_is_omap730()) {
386                 MPUI730_SAVE(MPUI_CTRL);
387                 MPUI730_SAVE(MPUI_DSP_STATUS);
388                 MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
389                 MPUI730_SAVE(MPUI_DSP_API_CONFIG);
390                 MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
391                 MPUI730_SAVE(EMIFS_CONFIG);
392         } else if (cpu_is_omap1510()) {
393                 MPUI1510_SAVE(MPUI_CTRL);
394                 MPUI1510_SAVE(MPUI_DSP_STATUS);
395                 MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
396                 MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
397                 MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
398                 MPUI1510_SAVE(EMIFS_CONFIG);
399         } else if (cpu_is_omap16xx()) {
400                 MPUI1610_SAVE(MPUI_CTRL);
401                 MPUI1610_SAVE(MPUI_DSP_STATUS);
402                 MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
403                 MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
404                 MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
405                 MPUI1610_SAVE(EMIFS_CONFIG);
406         }
407
408         if (virtual_start == 0) {
409                 g_read_completed = 0;
410
411                 my_buffer_offset += sprintf(my_base + my_buffer_offset,
412                    "ARM_CKCTL_REG:            0x%-8x     \n"
413                    "ARM_IDLECT1_REG:          0x%-8x     \n"
414                    "ARM_IDLECT2_REG:          0x%-8x     \n"
415                    "ARM_IDLECT3_REG:          0x%-8x     \n"
416                    "ARM_EWUPCT_REG:           0x%-8x     \n"
417                    "ARM_RSTCT1_REG:           0x%-8x     \n"
418                    "ARM_RSTCT2_REG:           0x%-8x     \n"
419                    "ARM_SYSST_REG:            0x%-8x     \n"
420                    "ULPD_IT_STATUS_REG:       0x%-4x     \n"
421                    "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
422                    "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
423                    "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
424                    "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
425                    "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
426                    ARM_SHOW(ARM_CKCTL),
427                    ARM_SHOW(ARM_IDLECT1),
428                    ARM_SHOW(ARM_IDLECT2),
429                    ARM_SHOW(ARM_IDLECT3),
430                    ARM_SHOW(ARM_EWUPCT),
431                    ARM_SHOW(ARM_RSTCT1),
432                    ARM_SHOW(ARM_RSTCT2),
433                    ARM_SHOW(ARM_SYSST),
434                    ULPD_SHOW(ULPD_IT_STATUS),
435                    ULPD_SHOW(ULPD_CLOCK_CTRL),
436                    ULPD_SHOW(ULPD_SOFT_REQ),
437                    ULPD_SHOW(ULPD_DPLL_CTRL),
438                    ULPD_SHOW(ULPD_STATUS_REQ),
439                    ULPD_SHOW(ULPD_POWER_CTRL));
440
441                 if (cpu_is_omap730()) {
442                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
443                            "MPUI730_CTRL_REG         0x%-8x \n"
444                            "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
445                            "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
446          "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
447          "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
448          "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
449          MPUI730_SHOW(MPUI_CTRL),
450          MPUI730_SHOW(MPUI_DSP_STATUS),
451          MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
452          MPUI730_SHOW(MPUI_DSP_API_CONFIG),
453          MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
454          MPUI730_SHOW(EMIFS_CONFIG));
455                 } else if (cpu_is_omap1510()) {
456                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
457                            "MPUI1510_CTRL_REG             0x%-8x \n"
458                            "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
459                            "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
460                            "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
461                            "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
462                            "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
463                            MPUI1510_SHOW(MPUI_CTRL),
464                            MPUI1510_SHOW(MPUI_DSP_STATUS),
465                            MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
466                            MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
467                            MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
468                            MPUI1510_SHOW(EMIFS_CONFIG));
469                 } else if (cpu_is_omap16xx()) {
470                         my_buffer_offset += sprintf(my_base + my_buffer_offset,
471                            "MPUI1610_CTRL_REG             0x%-8x \n"
472                            "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
473                            "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
474                            "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
475                            "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
476                            "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
477                            MPUI1610_SHOW(MPUI_CTRL),
478                            MPUI1610_SHOW(MPUI_DSP_STATUS),
479                            MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
480                            MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
481                            MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
482                            MPUI1610_SHOW(EMIFS_CONFIG));
483                 }
484
485                 g_read_completed++;
486         } else if (g_read_completed >= 1) {
487                  *eof = 1;
488                  return 0;
489         }
490         g_read_completed++;
491
492         *my_first_byte = page_buffer;
493         return  my_buffer_offset;
494 }
495
496 static void omap_pm_init_proc(void)
497 {
498         struct proc_dir_entry *entry;
499
500         entry = create_proc_read_entry("driver/omap_pm",
501                                        S_IWUSR | S_IRUGO, NULL,
502            omap_pm_read_proc, NULL);
503 }
504
505 #endif /* DEBUG && CONFIG_PROC_FS */
506
507 /*
508  *      omap_pm_prepare - Do preliminary suspend work.
509  *      @state:         suspend state we're entering.
510  *
511  */
512 //#include <asm/hardware.h>
513
514 static int omap_pm_prepare(suspend_state_t state)
515 {
516         int error = 0;
517
518         switch (state)
519         {
520         case PM_SUSPEND_STANDBY:
521         case PM_SUSPEND_MEM:
522                 break;
523
524         case PM_SUSPEND_DISK:
525                 return -ENOTSUPP;
526
527         default:
528                 return -EINVAL;
529         }
530
531         return error;
532 }
533
534
535 /*
536  *      omap_pm_enter - Actually enter a sleep state.
537  *      @state:         State we're entering.
538  *
539  */
540
541 static int omap_pm_enter(suspend_state_t state)
542 {
543         switch (state)
544         {
545         case PM_SUSPEND_STANDBY:
546         case PM_SUSPEND_MEM:
547                 omap_pm_suspend();
548                 break;
549
550         case PM_SUSPEND_DISK:
551                 return -ENOTSUPP;
552
553         default:
554                 return -EINVAL;
555         }
556
557         return 0;
558 }
559
560
561 /**
562  *      omap_pm_finish - Finish up suspend sequence.
563  *      @state:         State we're coming out of.
564  *
565  *      This is called after we wake back up (or if entering the sleep state
566  *      failed).
567  */
568
569 static int omap_pm_finish(suspend_state_t state)
570 {
571         return 0;
572 }
573
574
575 static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
576                                      struct pt_regs *  regs)
577 {
578         return IRQ_HANDLED;
579 }
580
581 static struct irqaction omap_wakeup_irq = {
582         .name           = "peripheral wakeup",
583         .flags          = SA_INTERRUPT,
584         .handler        = omap_wakeup_interrupt
585 };
586
587
588
589 static struct pm_ops omap_pm_ops ={
590         .pm_disk_mode = 0,
591         .prepare        = omap_pm_prepare,
592         .enter          = omap_pm_enter,
593         .finish         = omap_pm_finish,
594 };
595
596 static int __init omap_pm_init(void)
597 {
598         printk("Power Management for TI OMAP.\n");
599         /*
600          * We copy the assembler sleep/wakeup routines to SRAM.
601          * These routines need to be in SRAM as that's the only
602          * memory the MPU can see when it wakes up.
603          */
604         if (cpu_is_omap730()) {
605                 omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend,
606                                                 omap730_idle_loop_suspend_sz);
607                 omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
608          omap730_cpu_suspend_sz);
609         } else if (cpu_is_omap1510()) {
610                 omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
611                                                 omap1510_idle_loop_suspend_sz);
612                 omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
613                                                    omap1510_cpu_suspend_sz);
614         } else if (cpu_is_omap16xx()) {
615                 omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
616                                                 omap1610_idle_loop_suspend_sz);
617                 omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
618                                                    omap1610_cpu_suspend_sz);
619         }
620
621         if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
622                 printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
623                 return -ENODEV;
624         }
625
626         pm_idle = omap_pm_idle;
627
628         if (cpu_is_omap730())
629                 setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
630         else if (cpu_is_omap16xx())
631                 setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
632
633 #if 0
634         /* --- BEGIN BOARD-DEPENDENT CODE --- */
635         /* Sleepx mask direction */
636         omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
637         /* Unmask sleepx signal */
638         omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
639         /* --- END BOARD-DEPENDENT CODE --- */
640 #endif
641
642         /* Program new power ramp-up time
643          * (0 for most boards since we don't lower voltage when in deep sleep)
644          */
645         omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
646
647         /* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
648         omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
649
650         /* Configure IDLECT3 */
651         if (cpu_is_omap730())
652                 omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
653         else if (cpu_is_omap16xx())
654                 omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
655
656         pm_set_ops(&omap_pm_ops);
657
658 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
659         omap_pm_init_proc();
660 #endif
661
662         if (cpu_is_omap16xx()) {
663                 /* configure LOW_PWR pin */
664                 omap_cfg_reg(T20_1610_LOW_PWR);
665         }
666
667         return 0;
668 }
669 __initcall(omap_pm_init);
670