1 /* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
3 Written 1998-2001 by Donald Becker.
5 Current Maintainer: Roger Luethi <rl@hellgate.ch>
7 This software may be used and distributed according to the terms of
8 the GNU General Public License (GPL), incorporated herein by reference.
9 Drivers based on or derived from this code fall under the GPL and must
10 retain the authorship, copyright and license notice. This file is not
11 a complete program and may only be used when the entire operating
12 system is licensed under the GPL.
14 This driver is designed for the VIA VT86C100A Rhine-I.
15 It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
16 and management NIC 6105M).
18 The author may be reached as becker@scyld.com, or C/O
19 Scyld Computing Corporation
20 410 Severn Ave., Suite 210
24 This driver contains some changes from the original Donald Becker
25 version. He may or may not be interested in bug reports on this
26 code. You can find his versions at:
27 http://www.scyld.com/network/via-rhine.html
28 [link no longer provides useful info -jgarzik]
32 #define DRV_NAME "via-rhine"
33 #define DRV_VERSION "1.4.3"
34 #define DRV_RELDATE "2007-03-06"
37 /* A few user-configurable values.
38 These may be modified when a driver module is loaded. */
40 static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
41 static int max_interrupt_work = 20;
43 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
44 Setting to > 1518 effectively disables this feature. */
45 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
46 || defined(CONFIG_SPARC) || defined(__ia64__) \
47 || defined(__sh__) || defined(__mips__)
48 static int rx_copybreak = 1518;
50 static int rx_copybreak;
53 /* Work-around for broken BIOSes: they are unable to get the chip back out of
54 power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
58 * In case you are looking for 'options[]' or 'full_duplex[]', they
59 * are gone. Use ethtool(8) instead.
62 /* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
63 The Rhine has a 64 element 8390-like hash table. */
64 static const int multicast_filter_limit = 32;
67 /* Operational parameters that are set at compile time. */
69 /* Keep the ring sizes a power of two for compile efficiency.
70 The compiler will convert <unsigned>'%'<2^N> into a bit mask.
71 Making the Tx ring too large decreases the effectiveness of channel
72 bonding and packet priority.
73 There are no ill effects from too-large receive rings. */
74 #define TX_RING_SIZE 16
75 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
76 #ifdef CONFIG_VIA_RHINE_NAPI
77 #define RX_RING_SIZE 64
79 #define RX_RING_SIZE 16
83 /* Operational parameters that usually are not changed. */
85 /* Time in jiffies before concluding the transmitter is hung. */
86 #define TX_TIMEOUT (2*HZ)
88 #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
90 #include <linux/module.h>
91 #include <linux/moduleparam.h>
92 #include <linux/kernel.h>
93 #include <linux/string.h>
94 #include <linux/timer.h>
95 #include <linux/errno.h>
96 #include <linux/ioport.h>
97 #include <linux/slab.h>
98 #include <linux/interrupt.h>
99 #include <linux/pci.h>
100 #include <linux/dma-mapping.h>
101 #include <linux/netdevice.h>
102 #include <linux/etherdevice.h>
103 #include <linux/skbuff.h>
104 #include <linux/init.h>
105 #include <linux/delay.h>
106 #include <linux/mii.h>
107 #include <linux/ethtool.h>
108 #include <linux/crc32.h>
109 #include <linux/bitops.h>
110 #include <asm/processor.h> /* Processor type for cache alignment. */
113 #include <asm/uaccess.h>
114 #include <linux/dmi.h>
116 /* These identify the driver base version and may not be removed. */
117 static char version[] __devinitdata =
118 KERN_INFO DRV_NAME ".c:v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker\n";
120 /* This driver was written to use PCI memory space. Some early versions
121 of the Rhine may only work correctly with I/O space accesses. */
122 #ifdef CONFIG_VIA_RHINE_MMIO
127 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
128 MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
129 MODULE_LICENSE("GPL");
131 module_param(max_interrupt_work, int, 0);
132 module_param(debug, int, 0);
133 module_param(rx_copybreak, int, 0);
134 module_param(avoid_D3, bool, 0);
135 MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
136 MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
137 MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
138 MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
143 I. Board Compatibility
145 This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
148 II. Board-specific settings
150 Boards with this chip are functional only in a bus-master PCI slot.
152 Many operational settings are loaded from the EEPROM to the Config word at
153 offset 0x78. For most of these settings, this driver assumes that they are
155 If this driver is compiled to use PCI memory space operations the EEPROM
156 must be configured to enable memory ops.
158 III. Driver operation
162 This driver uses two statically allocated fixed-size descriptor lists
163 formed into rings by a branch from the final descriptor to the beginning of
164 the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
166 IIIb/c. Transmit/Receive Structure
168 This driver attempts to use a zero-copy receive and transmit scheme.
170 Alas, all data buffers are required to start on a 32 bit boundary, so
171 the driver must often copy transmit packets into bounce buffers.
173 The driver allocates full frame size skbuffs for the Rx ring buffers at
174 open() time and passes the skb->data field to the chip as receive data
175 buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
176 a fresh skbuff is allocated and the frame is copied to the new skbuff.
177 When the incoming frame is larger, the skbuff is passed directly up the
178 protocol stack. Buffers consumed this way are replaced by newly allocated
179 skbuffs in the last phase of rhine_rx().
181 The RX_COPYBREAK value is chosen to trade-off the memory wasted by
182 using a full-sized skbuff for small frames vs. the copying costs of larger
183 frames. New boards are typically used in generously configured machines
184 and the underfilled buffers have negligible impact compared to the benefit of
185 a single allocation size, so the default value of zero results in never
186 copying packets. When copying is done, the cost is usually mitigated by using
187 a combined copy/checksum routine. Copying also preloads the cache, which is
188 most useful with small frames.
190 Since the VIA chips are only able to transfer data to buffers on 32 bit
191 boundaries, the IP header at offset 14 in an ethernet frame isn't
192 longword aligned for further processing. Copying these unaligned buffers
193 has the beneficial effect of 16-byte aligning the IP header.
195 IIId. Synchronization
197 The driver runs as two independent, single-threaded flows of control. One
198 is the send-packet routine, which enforces single-threaded use by the
199 dev->priv->lock spinlock. The other thread is the interrupt handler, which
200 is single threaded by the hardware and interrupt handling software.
202 The send packet thread has partial control over the Tx ring. It locks the
203 dev->priv->lock whenever it's queuing a Tx packet. If the next slot in the ring
204 is not available it stops the transmit queue by calling netif_stop_queue.
206 The interrupt handler has exclusive control over the Rx ring and records stats
207 from the Tx ring. After reaping the stats, it marks the Tx queue entry as
208 empty by incrementing the dirty_tx mark. If at least half of the entries in
209 the Rx ring are available the transmit queue is woken up if it was stopped.
215 Preliminary VT86C100A manual from http://www.via.com.tw/
216 http://www.scyld.com/expert/100mbps.html
217 http://www.scyld.com/expert/NWay.html
218 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
219 ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
224 The VT86C100A manual is not reliable information.
225 The 3043 chip does not handle unaligned transmit or receive buffers, resulting
226 in significant performance degradation for bounce buffer copies on transmit
227 and unaligned IP headers on receive.
228 The chip does not pad to minimum transmit length.
233 /* This table drives the PCI probe routines. It's mostly boilerplate in all
234 of the drivers, and will likely be provided by some future kernel.
235 Note the matching code -- the first table entry matchs all 56** cards but
236 second only the 1234 card.
243 VT8231 = 0x50, /* Integrated MAC */
244 VT8233 = 0x60, /* Integrated MAC */
245 VT8235 = 0x74, /* Integrated MAC */
246 VT8237 = 0x78, /* Integrated MAC */
253 VT6105M = 0x90, /* Management adapter */
257 rqWOL = 0x0001, /* Wake-On-LAN support */
258 rqForceReset = 0x0002,
259 rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */
260 rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */
261 rqRhineI = 0x0100, /* See comment below */
264 * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
265 * MMIO as well as for the collision counter and the Tx FIFO underflow
266 * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
269 /* Beware of PCI posted writes */
270 #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
272 static const struct pci_device_id rhine_pci_tbl[] = {
273 { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
274 { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
275 { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
276 { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
277 { } /* terminate list */
279 MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
282 /* Offsets to the device registers. */
283 enum register_offsets {
284 StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
286 IntrStatus=0x0C, IntrEnable=0x0E,
287 MulticastFilter0=0x10, MulticastFilter1=0x14,
288 RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
289 MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
290 MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
291 ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
292 RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
293 StickyHW=0x83, IntrStatus2=0x84,
294 WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
295 WOLcrClr1=0xA6, WOLcgClr=0xA7,
296 PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
299 /* Bits in ConfigD */
301 BackOptional=0x01, BackModify=0x02,
302 BackCaptureEffect=0x04, BackRandom=0x08
306 /* Registers we check that mmio and reg are the same. */
307 static const int mmio_verify_registers[] = {
308 RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
313 /* Bits in the interrupt status/mask registers. */
314 enum intr_status_bits {
315 IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
316 IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
318 IntrStatsMax=0x0080, IntrRxEarly=0x0100,
319 IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
320 IntrTxAborted=0x2000, IntrLinkChange=0x4000,
322 IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
323 IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */
324 IntrTxErrSummary=0x082218,
327 /* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
336 /* The Rx and Tx buffer descriptors. */
339 u32 desc_length; /* Chain flag, Buffer/frame length */
345 u32 desc_length; /* Chain flag, Tx Config, Frame length */
350 /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
351 #define TXDESC 0x00e08000
353 enum rx_status_bits {
354 RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
357 /* Bits in *_desc.*_status */
358 enum desc_status_bits {
362 /* Bits in ChipCmd. */
364 CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
365 CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
366 Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
367 Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
370 struct rhine_private {
371 /* Descriptor rings */
372 struct rx_desc *rx_ring;
373 struct tx_desc *tx_ring;
374 dma_addr_t rx_ring_dma;
375 dma_addr_t tx_ring_dma;
377 /* The addresses of receive-in-place skbuffs. */
378 struct sk_buff *rx_skbuff[RX_RING_SIZE];
379 dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
381 /* The saved address of a sent-in-place packet/buffer, for later free(). */
382 struct sk_buff *tx_skbuff[TX_RING_SIZE];
383 dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
385 /* Tx bounce buffers (Rhine-I only) */
386 unsigned char *tx_buf[TX_RING_SIZE];
387 unsigned char *tx_bufs;
388 dma_addr_t tx_bufs_dma;
390 struct pci_dev *pdev;
392 struct net_device_stats stats;
395 /* Frequently used values: keep some adjacent for cache effect. */
397 struct rx_desc *rx_head_desc;
398 unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
399 unsigned int cur_tx, dirty_tx;
400 unsigned int rx_buf_sz; /* Based on MTU+slack. */
403 u8 tx_thresh, rx_thresh;
405 struct mii_if_info mii_if;
409 static int mdio_read(struct net_device *dev, int phy_id, int location);
410 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
411 static int rhine_open(struct net_device *dev);
412 static void rhine_tx_timeout(struct net_device *dev);
413 static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
414 static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
415 static void rhine_tx(struct net_device *dev);
416 static int rhine_rx(struct net_device *dev, int limit);
417 static void rhine_error(struct net_device *dev, int intr_status);
418 static void rhine_set_rx_mode(struct net_device *dev);
419 static struct net_device_stats *rhine_get_stats(struct net_device *dev);
420 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
421 static const struct ethtool_ops netdev_ethtool_ops;
422 static int rhine_close(struct net_device *dev);
423 static void rhine_shutdown (struct pci_dev *pdev);
425 #define RHINE_WAIT_FOR(condition) do { \
427 while (!(condition) && --i) \
429 if (debug > 1 && i < 512) \
430 printk(KERN_INFO "%s: %4d cycles used @ %s:%d\n", \
431 DRV_NAME, 1024-i, __func__, __LINE__); \
434 static inline u32 get_intr_status(struct net_device *dev)
436 struct rhine_private *rp = netdev_priv(dev);
437 void __iomem *ioaddr = rp->base;
440 intr_status = ioread16(ioaddr + IntrStatus);
441 /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
442 if (rp->quirks & rqStatusWBRace)
443 intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
448 * Get power related registers into sane state.
449 * Notify user about past WOL event.
451 static void rhine_power_init(struct net_device *dev)
453 struct rhine_private *rp = netdev_priv(dev);
454 void __iomem *ioaddr = rp->base;
457 if (rp->quirks & rqWOL) {
458 /* Make sure chip is in power state D0 */
459 iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
461 /* Disable "force PME-enable" */
462 iowrite8(0x80, ioaddr + WOLcgClr);
464 /* Clear power-event config bits (WOL) */
465 iowrite8(0xFF, ioaddr + WOLcrClr);
466 /* More recent cards can manage two additional patterns */
467 if (rp->quirks & rq6patterns)
468 iowrite8(0x03, ioaddr + WOLcrClr1);
470 /* Save power-event status bits */
471 wolstat = ioread8(ioaddr + PwrcsrSet);
472 if (rp->quirks & rq6patterns)
473 wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
475 /* Clear power-event status bits */
476 iowrite8(0xFF, ioaddr + PwrcsrClr);
477 if (rp->quirks & rq6patterns)
478 iowrite8(0x03, ioaddr + PwrcsrClr1);
484 reason = "Magic packet";
487 reason = "Link went up";
490 reason = "Link went down";
493 reason = "Unicast packet";
496 reason = "Multicast/broadcast packet";
501 printk(KERN_INFO "%s: Woke system up. Reason: %s.\n",
507 static void rhine_chip_reset(struct net_device *dev)
509 struct rhine_private *rp = netdev_priv(dev);
510 void __iomem *ioaddr = rp->base;
512 iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
515 if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
516 printk(KERN_INFO "%s: Reset not complete yet. "
517 "Trying harder.\n", DRV_NAME);
520 if (rp->quirks & rqForceReset)
521 iowrite8(0x40, ioaddr + MiscCmd);
523 /* Reset can take somewhat longer (rare) */
524 RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
528 printk(KERN_INFO "%s: Reset %s.\n", dev->name,
529 (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
530 "failed" : "succeeded");
534 static void enable_mmio(long pioaddr, u32 quirks)
537 if (quirks & rqRhineI) {
538 /* More recent docs say that this bit is reserved ... */
539 n = inb(pioaddr + ConfigA) | 0x20;
540 outb(n, pioaddr + ConfigA);
542 n = inb(pioaddr + ConfigD) | 0x80;
543 outb(n, pioaddr + ConfigD);
549 * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
550 * (plus 0x6C for Rhine-I/II)
552 static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
554 struct rhine_private *rp = netdev_priv(dev);
555 void __iomem *ioaddr = rp->base;
557 outb(0x20, pioaddr + MACRegEEcsr);
558 RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
562 * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
563 * MMIO. If reloading EEPROM was done first this could be avoided, but
564 * it is not known if that still works with the "win98-reboot" problem.
566 enable_mmio(pioaddr, rp->quirks);
569 /* Turn off EEPROM-controlled wake-up (magic packet) */
570 if (rp->quirks & rqWOL)
571 iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
575 #ifdef CONFIG_NET_POLL_CONTROLLER
576 static void rhine_poll(struct net_device *dev)
578 disable_irq(dev->irq);
579 rhine_interrupt(dev->irq, (void *)dev);
580 enable_irq(dev->irq);
584 #ifdef CONFIG_VIA_RHINE_NAPI
585 static int rhine_napipoll(struct net_device *dev, int *budget)
587 struct rhine_private *rp = netdev_priv(dev);
588 void __iomem *ioaddr = rp->base;
589 int done, limit = min(dev->quota, *budget);
591 done = rhine_rx(dev, limit);
596 netif_rx_complete(dev);
598 iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
599 IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
600 IntrTxDone | IntrTxError | IntrTxUnderrun |
601 IntrPCIErr | IntrStatsMax | IntrLinkChange,
602 ioaddr + IntrEnable);
610 static void rhine_hw_init(struct net_device *dev, long pioaddr)
612 struct rhine_private *rp = netdev_priv(dev);
614 /* Reset the chip to erase previous misconfiguration. */
615 rhine_chip_reset(dev);
617 /* Rhine-I needs extra time to recuperate before EEPROM reload */
618 if (rp->quirks & rqRhineI)
621 /* Reload EEPROM controlled bytes cleared by soft reset */
622 rhine_reload_eeprom(pioaddr, dev);
625 static int __devinit rhine_init_one(struct pci_dev *pdev,
626 const struct pci_device_id *ent)
628 struct net_device *dev;
629 struct rhine_private *rp;
634 void __iomem *ioaddr;
643 /* when built into the kernel, we only print version if device is found */
645 static int printed_version;
646 if (!printed_version++)
654 if (pdev->revision < VTunknown0) {
658 else if (pdev->revision >= VT6102) {
659 quirks = rqWOL | rqForceReset;
660 if (pdev->revision < VT6105) {
662 quirks |= rqStatusWBRace; /* Rhine-II exclusive */
665 phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
666 if (pdev->revision >= VT6105_B0)
667 quirks |= rq6patterns;
668 if (pdev->revision < VT6105M)
671 name = "Rhine III (Management Adapter)";
675 rc = pci_enable_device(pdev);
679 /* this should always be supported */
680 rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
682 printk(KERN_ERR "32-bit PCI DMA addresses not supported by "
688 if ((pci_resource_len(pdev, 0) < io_size) ||
689 (pci_resource_len(pdev, 1) < io_size)) {
691 printk(KERN_ERR "Insufficient PCI resources, aborting\n");
695 pioaddr = pci_resource_start(pdev, 0);
696 memaddr = pci_resource_start(pdev, 1);
698 pci_set_master(pdev);
700 dev = alloc_etherdev(sizeof(struct rhine_private));
703 printk(KERN_ERR "alloc_etherdev failed\n");
706 SET_MODULE_OWNER(dev);
707 SET_NETDEV_DEV(dev, &pdev->dev);
709 rp = netdev_priv(dev);
711 rp->pioaddr = pioaddr;
714 rc = pci_request_regions(pdev, DRV_NAME);
716 goto err_out_free_netdev;
718 ioaddr = pci_iomap(pdev, bar, io_size);
721 printk(KERN_ERR "ioremap failed for device %s, region 0x%X "
722 "@ 0x%lX\n", pci_name(pdev), io_size, memaddr);
723 goto err_out_free_res;
727 enable_mmio(pioaddr, quirks);
729 /* Check that selected MMIO registers match the PIO ones */
731 while (mmio_verify_registers[i]) {
732 int reg = mmio_verify_registers[i++];
733 unsigned char a = inb(pioaddr+reg);
734 unsigned char b = readb(ioaddr+reg);
737 printk(KERN_ERR "MMIO do not match PIO [%02x] "
738 "(%02x != %02x)\n", reg, a, b);
742 #endif /* USE_MMIO */
744 dev->base_addr = (unsigned long)ioaddr;
747 /* Get chip registers into a sane state */
748 rhine_power_init(dev);
749 rhine_hw_init(dev, pioaddr);
751 for (i = 0; i < 6; i++)
752 dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
753 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
755 if (!is_valid_ether_addr(dev->perm_addr)) {
757 printk(KERN_ERR "Invalid MAC address\n");
761 /* For Rhine-I/II, phy_id is loaded from EEPROM */
763 phy_id = ioread8(ioaddr + 0x6C);
765 dev->irq = pdev->irq;
767 spin_lock_init(&rp->lock);
768 rp->mii_if.dev = dev;
769 rp->mii_if.mdio_read = mdio_read;
770 rp->mii_if.mdio_write = mdio_write;
771 rp->mii_if.phy_id_mask = 0x1f;
772 rp->mii_if.reg_num_mask = 0x1f;
774 /* The chip-specific entries in the device structure. */
775 dev->open = rhine_open;
776 dev->hard_start_xmit = rhine_start_tx;
777 dev->stop = rhine_close;
778 dev->get_stats = rhine_get_stats;
779 dev->set_multicast_list = rhine_set_rx_mode;
780 dev->do_ioctl = netdev_ioctl;
781 dev->ethtool_ops = &netdev_ethtool_ops;
782 dev->tx_timeout = rhine_tx_timeout;
783 dev->watchdog_timeo = TX_TIMEOUT;
784 #ifdef CONFIG_NET_POLL_CONTROLLER
785 dev->poll_controller = rhine_poll;
787 #ifdef CONFIG_VIA_RHINE_NAPI
788 dev->poll = rhine_napipoll;
791 if (rp->quirks & rqRhineI)
792 dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
794 /* dev->name not defined before register_netdev()! */
795 rc = register_netdev(dev);
799 printk(KERN_INFO "%s: VIA %s at 0x%lx, ",
808 for (i = 0; i < 5; i++)
809 printk("%2.2x:", dev->dev_addr[i]);
810 printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], pdev->irq);
812 pci_set_drvdata(pdev, dev);
816 int mii_status = mdio_read(dev, phy_id, 1);
817 mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
818 mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
819 if (mii_status != 0xffff && mii_status != 0x0000) {
820 rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
821 printk(KERN_INFO "%s: MII PHY found at address "
822 "%d, status 0x%4.4x advertising %4.4x "
823 "Link %4.4x.\n", dev->name, phy_id,
824 mii_status, rp->mii_if.advertising,
825 mdio_read(dev, phy_id, 5));
827 /* set IFF_RUNNING */
828 if (mii_status & BMSR_LSTATUS)
829 netif_carrier_on(dev);
831 netif_carrier_off(dev);
835 rp->mii_if.phy_id = phy_id;
836 if (debug > 1 && avoid_D3)
837 printk(KERN_INFO "%s: No D3 power state at shutdown.\n",
843 pci_iounmap(pdev, ioaddr);
845 pci_release_regions(pdev);
852 static int alloc_ring(struct net_device* dev)
854 struct rhine_private *rp = netdev_priv(dev);
858 ring = pci_alloc_consistent(rp->pdev,
859 RX_RING_SIZE * sizeof(struct rx_desc) +
860 TX_RING_SIZE * sizeof(struct tx_desc),
863 printk(KERN_ERR "Could not allocate DMA memory.\n");
866 if (rp->quirks & rqRhineI) {
867 rp->tx_bufs = pci_alloc_consistent(rp->pdev,
868 PKT_BUF_SZ * TX_RING_SIZE,
870 if (rp->tx_bufs == NULL) {
871 pci_free_consistent(rp->pdev,
872 RX_RING_SIZE * sizeof(struct rx_desc) +
873 TX_RING_SIZE * sizeof(struct tx_desc),
880 rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
881 rp->rx_ring_dma = ring_dma;
882 rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
887 static void free_ring(struct net_device* dev)
889 struct rhine_private *rp = netdev_priv(dev);
891 pci_free_consistent(rp->pdev,
892 RX_RING_SIZE * sizeof(struct rx_desc) +
893 TX_RING_SIZE * sizeof(struct tx_desc),
894 rp->rx_ring, rp->rx_ring_dma);
898 pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
899 rp->tx_bufs, rp->tx_bufs_dma);
905 static void alloc_rbufs(struct net_device *dev)
907 struct rhine_private *rp = netdev_priv(dev);
911 rp->dirty_rx = rp->cur_rx = 0;
913 rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
914 rp->rx_head_desc = &rp->rx_ring[0];
915 next = rp->rx_ring_dma;
917 /* Init the ring entries */
918 for (i = 0; i < RX_RING_SIZE; i++) {
919 rp->rx_ring[i].rx_status = 0;
920 rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
921 next += sizeof(struct rx_desc);
922 rp->rx_ring[i].next_desc = cpu_to_le32(next);
923 rp->rx_skbuff[i] = NULL;
925 /* Mark the last entry as wrapping the ring. */
926 rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
928 /* Fill in the Rx buffers. Handle allocation failure gracefully. */
929 for (i = 0; i < RX_RING_SIZE; i++) {
930 struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
931 rp->rx_skbuff[i] = skb;
934 skb->dev = dev; /* Mark as being used by this device. */
936 rp->rx_skbuff_dma[i] =
937 pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
940 rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
941 rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
943 rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
946 static void free_rbufs(struct net_device* dev)
948 struct rhine_private *rp = netdev_priv(dev);
951 /* Free all the skbuffs in the Rx queue. */
952 for (i = 0; i < RX_RING_SIZE; i++) {
953 rp->rx_ring[i].rx_status = 0;
954 rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
955 if (rp->rx_skbuff[i]) {
956 pci_unmap_single(rp->pdev,
957 rp->rx_skbuff_dma[i],
958 rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
959 dev_kfree_skb(rp->rx_skbuff[i]);
961 rp->rx_skbuff[i] = NULL;
965 static void alloc_tbufs(struct net_device* dev)
967 struct rhine_private *rp = netdev_priv(dev);
971 rp->dirty_tx = rp->cur_tx = 0;
972 next = rp->tx_ring_dma;
973 for (i = 0; i < TX_RING_SIZE; i++) {
974 rp->tx_skbuff[i] = NULL;
975 rp->tx_ring[i].tx_status = 0;
976 rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
977 next += sizeof(struct tx_desc);
978 rp->tx_ring[i].next_desc = cpu_to_le32(next);
979 if (rp->quirks & rqRhineI)
980 rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
982 rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
986 static void free_tbufs(struct net_device* dev)
988 struct rhine_private *rp = netdev_priv(dev);
991 for (i = 0; i < TX_RING_SIZE; i++) {
992 rp->tx_ring[i].tx_status = 0;
993 rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
994 rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
995 if (rp->tx_skbuff[i]) {
996 if (rp->tx_skbuff_dma[i]) {
997 pci_unmap_single(rp->pdev,
998 rp->tx_skbuff_dma[i],
999 rp->tx_skbuff[i]->len,
1002 dev_kfree_skb(rp->tx_skbuff[i]);
1004 rp->tx_skbuff[i] = NULL;
1005 rp->tx_buf[i] = NULL;
1009 static void rhine_check_media(struct net_device *dev, unsigned int init_media)
1011 struct rhine_private *rp = netdev_priv(dev);
1012 void __iomem *ioaddr = rp->base;
1014 mii_check_media(&rp->mii_if, debug, init_media);
1016 if (rp->mii_if.full_duplex)
1017 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
1020 iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
1023 printk(KERN_INFO "%s: force_media %d, carrier %d\n", dev->name,
1024 rp->mii_if.force_media, netif_carrier_ok(dev));
1027 /* Called after status of force_media possibly changed */
1028 static void rhine_set_carrier(struct mii_if_info *mii)
1030 if (mii->force_media) {
1031 /* autoneg is off: Link is always assumed to be up */
1032 if (!netif_carrier_ok(mii->dev))
1033 netif_carrier_on(mii->dev);
1035 else /* Let MMI library update carrier status */
1036 rhine_check_media(mii->dev, 0);
1038 printk(KERN_INFO "%s: force_media %d, carrier %d\n",
1039 mii->dev->name, mii->force_media,
1040 netif_carrier_ok(mii->dev));
1043 static void init_registers(struct net_device *dev)
1045 struct rhine_private *rp = netdev_priv(dev);
1046 void __iomem *ioaddr = rp->base;
1049 for (i = 0; i < 6; i++)
1050 iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
1052 /* Initialize other registers. */
1053 iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */
1054 /* Configure initial FIFO thresholds. */
1055 iowrite8(0x20, ioaddr + TxConfig);
1056 rp->tx_thresh = 0x20;
1057 rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */
1059 iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
1060 iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
1062 rhine_set_rx_mode(dev);
1064 netif_poll_enable(dev);
1066 /* Enable interrupts by setting the interrupt mask. */
1067 iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
1068 IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
1069 IntrTxDone | IntrTxError | IntrTxUnderrun |
1070 IntrPCIErr | IntrStatsMax | IntrLinkChange,
1071 ioaddr + IntrEnable);
1073 iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
1075 rhine_check_media(dev, 1);
1078 /* Enable MII link status auto-polling (required for IntrLinkChange) */
1079 static void rhine_enable_linkmon(void __iomem *ioaddr)
1081 iowrite8(0, ioaddr + MIICmd);
1082 iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
1083 iowrite8(0x80, ioaddr + MIICmd);
1085 RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
1087 iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
1090 /* Disable MII link status auto-polling (required for MDIO access) */
1091 static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
1093 iowrite8(0, ioaddr + MIICmd);
1095 if (quirks & rqRhineI) {
1096 iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
1098 /* Can be called from ISR. Evil. */
1101 /* 0x80 must be set immediately before turning it off */
1102 iowrite8(0x80, ioaddr + MIICmd);
1104 RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
1106 /* Heh. Now clear 0x80 again. */
1107 iowrite8(0, ioaddr + MIICmd);
1110 RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
1113 /* Read and write over the MII Management Data I/O (MDIO) interface. */
1115 static int mdio_read(struct net_device *dev, int phy_id, int regnum)
1117 struct rhine_private *rp = netdev_priv(dev);
1118 void __iomem *ioaddr = rp->base;
1121 rhine_disable_linkmon(ioaddr, rp->quirks);
1123 /* rhine_disable_linkmon already cleared MIICmd */
1124 iowrite8(phy_id, ioaddr + MIIPhyAddr);
1125 iowrite8(regnum, ioaddr + MIIRegAddr);
1126 iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */
1127 RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
1128 result = ioread16(ioaddr + MIIData);
1130 rhine_enable_linkmon(ioaddr);
1134 static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
1136 struct rhine_private *rp = netdev_priv(dev);
1137 void __iomem *ioaddr = rp->base;
1139 rhine_disable_linkmon(ioaddr, rp->quirks);
1141 /* rhine_disable_linkmon already cleared MIICmd */
1142 iowrite8(phy_id, ioaddr + MIIPhyAddr);
1143 iowrite8(regnum, ioaddr + MIIRegAddr);
1144 iowrite16(value, ioaddr + MIIData);
1145 iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */
1146 RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
1148 rhine_enable_linkmon(ioaddr);
1151 static int rhine_open(struct net_device *dev)
1153 struct rhine_private *rp = netdev_priv(dev);
1154 void __iomem *ioaddr = rp->base;
1157 rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
1163 printk(KERN_DEBUG "%s: rhine_open() irq %d.\n",
1164 dev->name, rp->pdev->irq);
1166 rc = alloc_ring(dev);
1168 free_irq(rp->pdev->irq, dev);
1173 rhine_chip_reset(dev);
1174 init_registers(dev);
1176 printk(KERN_DEBUG "%s: Done rhine_open(), status %4.4x "
1177 "MII status: %4.4x.\n",
1178 dev->name, ioread16(ioaddr + ChipCmd),
1179 mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
1181 netif_start_queue(dev);
1186 static void rhine_tx_timeout(struct net_device *dev)
1188 struct rhine_private *rp = netdev_priv(dev);
1189 void __iomem *ioaddr = rp->base;
1191 printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
1192 "%4.4x, resetting...\n",
1193 dev->name, ioread16(ioaddr + IntrStatus),
1194 mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
1196 /* protect against concurrent rx interrupts */
1197 disable_irq(rp->pdev->irq);
1199 spin_lock(&rp->lock);
1201 /* clear all descriptors */
1207 /* Reinitialize the hardware. */
1208 rhine_chip_reset(dev);
1209 init_registers(dev);
1211 spin_unlock(&rp->lock);
1212 enable_irq(rp->pdev->irq);
1214 dev->trans_start = jiffies;
1215 rp->stats.tx_errors++;
1216 netif_wake_queue(dev);
1219 static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
1221 struct rhine_private *rp = netdev_priv(dev);
1222 void __iomem *ioaddr = rp->base;
1225 /* Caution: the write order is important here, set the field
1226 with the "ownership" bits last. */
1228 /* Calculate the next Tx descriptor entry. */
1229 entry = rp->cur_tx % TX_RING_SIZE;
1231 if (skb_padto(skb, ETH_ZLEN))
1234 rp->tx_skbuff[entry] = skb;
1236 if ((rp->quirks & rqRhineI) &&
1237 (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) {
1238 /* Must use alignment buffer. */
1239 if (skb->len > PKT_BUF_SZ) {
1240 /* packet too long, drop it */
1242 rp->tx_skbuff[entry] = NULL;
1243 rp->stats.tx_dropped++;
1247 /* Padding is not copied and so must be redone. */
1248 skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
1249 if (skb->len < ETH_ZLEN)
1250 memset(rp->tx_buf[entry] + skb->len, 0,
1251 ETH_ZLEN - skb->len);
1252 rp->tx_skbuff_dma[entry] = 0;
1253 rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
1254 (rp->tx_buf[entry] -
1257 rp->tx_skbuff_dma[entry] =
1258 pci_map_single(rp->pdev, skb->data, skb->len,
1260 rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
1263 rp->tx_ring[entry].desc_length =
1264 cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
1267 spin_lock_irq(&rp->lock);
1269 rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
1274 /* Non-x86 Todo: explicitly flush cache lines here. */
1276 /* Wake the potentially-idle transmit channel */
1277 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
1281 if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
1282 netif_stop_queue(dev);
1284 dev->trans_start = jiffies;
1286 spin_unlock_irq(&rp->lock);
1289 printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
1290 dev->name, rp->cur_tx-1, entry);
1295 /* The interrupt handler does all of the Rx thread work and cleans up
1296 after the Tx thread. */
1297 static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
1299 struct net_device *dev = dev_instance;
1300 struct rhine_private *rp = netdev_priv(dev);
1301 void __iomem *ioaddr = rp->base;
1303 int boguscnt = max_interrupt_work;
1306 while ((intr_status = get_intr_status(dev))) {
1309 /* Acknowledge all of the current interrupt sources ASAP. */
1310 if (intr_status & IntrTxDescRace)
1311 iowrite8(0x08, ioaddr + IntrStatus2);
1312 iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
1316 printk(KERN_DEBUG "%s: Interrupt, status %8.8x.\n",
1317 dev->name, intr_status);
1319 if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
1320 IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
1321 #ifdef CONFIG_VIA_RHINE_NAPI
1322 iowrite16(IntrTxAborted |
1323 IntrTxDone | IntrTxError | IntrTxUnderrun |
1324 IntrPCIErr | IntrStatsMax | IntrLinkChange,
1325 ioaddr + IntrEnable);
1327 netif_rx_schedule(dev);
1329 rhine_rx(dev, RX_RING_SIZE);
1333 if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
1334 if (intr_status & IntrTxErrSummary) {
1335 /* Avoid scavenging before Tx engine turned off */
1336 RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
1338 ioread8(ioaddr+ChipCmd) & CmdTxOn)
1339 printk(KERN_WARNING "%s: "
1340 "rhine_interrupt() Tx engine"
1341 "still on.\n", dev->name);
1346 /* Abnormal error summary/uncommon events handlers. */
1347 if (intr_status & (IntrPCIErr | IntrLinkChange |
1348 IntrStatsMax | IntrTxError | IntrTxAborted |
1349 IntrTxUnderrun | IntrTxDescRace))
1350 rhine_error(dev, intr_status);
1352 if (--boguscnt < 0) {
1353 printk(KERN_WARNING "%s: Too much work at interrupt, "
1355 dev->name, intr_status);
1361 printk(KERN_DEBUG "%s: exiting interrupt, status=%8.8x.\n",
1362 dev->name, ioread16(ioaddr + IntrStatus));
1363 return IRQ_RETVAL(handled);
1366 /* This routine is logically part of the interrupt handler, but isolated
1368 static void rhine_tx(struct net_device *dev)
1370 struct rhine_private *rp = netdev_priv(dev);
1371 int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
1373 spin_lock(&rp->lock);
1375 /* find and cleanup dirty tx descriptors */
1376 while (rp->dirty_tx != rp->cur_tx) {
1377 txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
1379 printk(KERN_DEBUG "Tx scavenge %d status %8.8x.\n",
1381 if (txstatus & DescOwn)
1383 if (txstatus & 0x8000) {
1385 printk(KERN_DEBUG "%s: Transmit error, "
1386 "Tx status %8.8x.\n",
1387 dev->name, txstatus);
1388 rp->stats.tx_errors++;
1389 if (txstatus & 0x0400) rp->stats.tx_carrier_errors++;
1390 if (txstatus & 0x0200) rp->stats.tx_window_errors++;
1391 if (txstatus & 0x0100) rp->stats.tx_aborted_errors++;
1392 if (txstatus & 0x0080) rp->stats.tx_heartbeat_errors++;
1393 if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
1394 (txstatus & 0x0800) || (txstatus & 0x1000)) {
1395 rp->stats.tx_fifo_errors++;
1396 rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
1397 break; /* Keep the skb - we try again */
1399 /* Transmitter restarted in 'abnormal' handler. */
1401 if (rp->quirks & rqRhineI)
1402 rp->stats.collisions += (txstatus >> 3) & 0x0F;
1404 rp->stats.collisions += txstatus & 0x0F;
1406 printk(KERN_DEBUG "collisions: %1.1x:%1.1x\n",
1407 (txstatus >> 3) & 0xF,
1409 rp->stats.tx_bytes += rp->tx_skbuff[entry]->len;
1410 rp->stats.tx_packets++;
1412 /* Free the original skb. */
1413 if (rp->tx_skbuff_dma[entry]) {
1414 pci_unmap_single(rp->pdev,
1415 rp->tx_skbuff_dma[entry],
1416 rp->tx_skbuff[entry]->len,
1419 dev_kfree_skb_irq(rp->tx_skbuff[entry]);
1420 rp->tx_skbuff[entry] = NULL;
1421 entry = (++rp->dirty_tx) % TX_RING_SIZE;
1423 if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
1424 netif_wake_queue(dev);
1426 spin_unlock(&rp->lock);
1429 /* Process up to limit frames from receive ring */
1430 static int rhine_rx(struct net_device *dev, int limit)
1432 struct rhine_private *rp = netdev_priv(dev);
1434 int entry = rp->cur_rx % RX_RING_SIZE;
1437 printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n",
1439 le32_to_cpu(rp->rx_head_desc->rx_status));
1442 /* If EOP is set on the next entry, it's a new packet. Send it up. */
1443 for (count = 0; count < limit; ++count) {
1444 struct rx_desc *desc = rp->rx_head_desc;
1445 u32 desc_status = le32_to_cpu(desc->rx_status);
1446 int data_size = desc_status >> 16;
1448 if (desc_status & DescOwn)
1452 printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n",
1455 if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
1456 if ((desc_status & RxWholePkt) != RxWholePkt) {
1457 printk(KERN_WARNING "%s: Oversized Ethernet "
1458 "frame spanned multiple buffers, entry "
1459 "%#x length %d status %8.8x!\n",
1460 dev->name, entry, data_size,
1462 printk(KERN_WARNING "%s: Oversized Ethernet "
1463 "frame %p vs %p.\n", dev->name,
1464 rp->rx_head_desc, &rp->rx_ring[entry]);
1465 rp->stats.rx_length_errors++;
1466 } else if (desc_status & RxErr) {
1467 /* There was a error. */
1469 printk(KERN_DEBUG "rhine_rx() Rx "
1470 "error was %8.8x.\n",
1472 rp->stats.rx_errors++;
1473 if (desc_status & 0x0030) rp->stats.rx_length_errors++;
1474 if (desc_status & 0x0048) rp->stats.rx_fifo_errors++;
1475 if (desc_status & 0x0004) rp->stats.rx_frame_errors++;
1476 if (desc_status & 0x0002) {
1477 /* this can also be updated outside the interrupt handler */
1478 spin_lock(&rp->lock);
1479 rp->stats.rx_crc_errors++;
1480 spin_unlock(&rp->lock);
1484 struct sk_buff *skb;
1485 /* Length should omit the CRC */
1486 int pkt_len = data_size - 4;
1488 /* Check if the packet is long enough to accept without
1489 copying to a minimally-sized skbuff. */
1490 if (pkt_len < rx_copybreak &&
1491 (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
1492 skb_reserve(skb, 2); /* 16 byte align the IP header */
1493 pci_dma_sync_single_for_cpu(rp->pdev,
1494 rp->rx_skbuff_dma[entry],
1496 PCI_DMA_FROMDEVICE);
1498 skb_copy_to_linear_data(skb,
1499 rp->rx_skbuff[entry]->data,
1501 skb_put(skb, pkt_len);
1502 pci_dma_sync_single_for_device(rp->pdev,
1503 rp->rx_skbuff_dma[entry],
1505 PCI_DMA_FROMDEVICE);
1507 skb = rp->rx_skbuff[entry];
1509 printk(KERN_ERR "%s: Inconsistent Rx "
1510 "descriptor chain.\n",
1514 rp->rx_skbuff[entry] = NULL;
1515 skb_put(skb, pkt_len);
1516 pci_unmap_single(rp->pdev,
1517 rp->rx_skbuff_dma[entry],
1519 PCI_DMA_FROMDEVICE);
1521 skb->protocol = eth_type_trans(skb, dev);
1522 #ifdef CONFIG_VIA_RHINE_NAPI
1523 netif_receive_skb(skb);
1527 dev->last_rx = jiffies;
1528 rp->stats.rx_bytes += pkt_len;
1529 rp->stats.rx_packets++;
1531 entry = (++rp->cur_rx) % RX_RING_SIZE;
1532 rp->rx_head_desc = &rp->rx_ring[entry];
1535 /* Refill the Rx ring buffers. */
1536 for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
1537 struct sk_buff *skb;
1538 entry = rp->dirty_rx % RX_RING_SIZE;
1539 if (rp->rx_skbuff[entry] == NULL) {
1540 skb = dev_alloc_skb(rp->rx_buf_sz);
1541 rp->rx_skbuff[entry] = skb;
1543 break; /* Better luck next round. */
1544 skb->dev = dev; /* Mark as being used by this device. */
1545 rp->rx_skbuff_dma[entry] =
1546 pci_map_single(rp->pdev, skb->data,
1548 PCI_DMA_FROMDEVICE);
1549 rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
1551 rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
1558 * Clears the "tally counters" for CRC errors and missed frames(?).
1559 * It has been reported that some chips need a write of 0 to clear
1560 * these, for others the counters are set to 1 when written to and
1561 * instead cleared when read. So we clear them both ways ...
1563 static inline void clear_tally_counters(void __iomem *ioaddr)
1565 iowrite32(0, ioaddr + RxMissed);
1566 ioread16(ioaddr + RxCRCErrs);
1567 ioread16(ioaddr + RxMissed);
1570 static void rhine_restart_tx(struct net_device *dev) {
1571 struct rhine_private *rp = netdev_priv(dev);
1572 void __iomem *ioaddr = rp->base;
1573 int entry = rp->dirty_tx % TX_RING_SIZE;
1577 * If new errors occured, we need to sort them out before doing Tx.
1578 * In that case the ISR will be back here RSN anyway.
1580 intr_status = get_intr_status(dev);
1582 if ((intr_status & IntrTxErrSummary) == 0) {
1584 /* We know better than the chip where it should continue. */
1585 iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
1586 ioaddr + TxRingPtr);
1588 iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
1590 iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
1595 /* This should never happen */
1597 printk(KERN_WARNING "%s: rhine_restart_tx() "
1598 "Another error occured %8.8x.\n",
1599 dev->name, intr_status);
1604 static void rhine_error(struct net_device *dev, int intr_status)
1606 struct rhine_private *rp = netdev_priv(dev);
1607 void __iomem *ioaddr = rp->base;
1609 spin_lock(&rp->lock);
1611 if (intr_status & IntrLinkChange)
1612 rhine_check_media(dev, 0);
1613 if (intr_status & IntrStatsMax) {
1614 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
1615 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
1616 clear_tally_counters(ioaddr);
1618 if (intr_status & IntrTxAborted) {
1620 printk(KERN_INFO "%s: Abort %8.8x, frame dropped.\n",
1621 dev->name, intr_status);
1623 if (intr_status & IntrTxUnderrun) {
1624 if (rp->tx_thresh < 0xE0)
1625 iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
1627 printk(KERN_INFO "%s: Transmitter underrun, Tx "
1628 "threshold now %2.2x.\n",
1629 dev->name, rp->tx_thresh);
1631 if (intr_status & IntrTxDescRace) {
1633 printk(KERN_INFO "%s: Tx descriptor write-back race.\n",
1636 if ((intr_status & IntrTxError) &&
1637 (intr_status & (IntrTxAborted |
1638 IntrTxUnderrun | IntrTxDescRace)) == 0) {
1639 if (rp->tx_thresh < 0xE0) {
1640 iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
1643 printk(KERN_INFO "%s: Unspecified error. Tx "
1644 "threshold now %2.2x.\n",
1645 dev->name, rp->tx_thresh);
1647 if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
1649 rhine_restart_tx(dev);
1651 if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
1652 IntrTxError | IntrTxAborted | IntrNormalSummary |
1655 printk(KERN_ERR "%s: Something Wicked happened! "
1656 "%8.8x.\n", dev->name, intr_status);
1659 spin_unlock(&rp->lock);
1662 static struct net_device_stats *rhine_get_stats(struct net_device *dev)
1664 struct rhine_private *rp = netdev_priv(dev);
1665 void __iomem *ioaddr = rp->base;
1666 unsigned long flags;
1668 spin_lock_irqsave(&rp->lock, flags);
1669 rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
1670 rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
1671 clear_tally_counters(ioaddr);
1672 spin_unlock_irqrestore(&rp->lock, flags);
1677 static void rhine_set_rx_mode(struct net_device *dev)
1679 struct rhine_private *rp = netdev_priv(dev);
1680 void __iomem *ioaddr = rp->base;
1681 u32 mc_filter[2]; /* Multicast hash filter */
1682 u8 rx_mode; /* Note: 0x02=accept runt, 0x01=accept errs */
1684 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1686 iowrite32(0xffffffff, ioaddr + MulticastFilter0);
1687 iowrite32(0xffffffff, ioaddr + MulticastFilter1);
1688 } else if ((dev->mc_count > multicast_filter_limit)
1689 || (dev->flags & IFF_ALLMULTI)) {
1690 /* Too many to match, or accept all multicasts. */
1691 iowrite32(0xffffffff, ioaddr + MulticastFilter0);
1692 iowrite32(0xffffffff, ioaddr + MulticastFilter1);
1695 struct dev_mc_list *mclist;
1697 memset(mc_filter, 0, sizeof(mc_filter));
1698 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
1699 i++, mclist = mclist->next) {
1700 int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
1702 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
1704 iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
1705 iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
1708 iowrite8(rp->rx_thresh | rx_mode, ioaddr + RxConfig);
1711 static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1713 struct rhine_private *rp = netdev_priv(dev);
1715 strcpy(info->driver, DRV_NAME);
1716 strcpy(info->version, DRV_VERSION);
1717 strcpy(info->bus_info, pci_name(rp->pdev));
1720 static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1722 struct rhine_private *rp = netdev_priv(dev);
1725 spin_lock_irq(&rp->lock);
1726 rc = mii_ethtool_gset(&rp->mii_if, cmd);
1727 spin_unlock_irq(&rp->lock);
1732 static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1734 struct rhine_private *rp = netdev_priv(dev);
1737 spin_lock_irq(&rp->lock);
1738 rc = mii_ethtool_sset(&rp->mii_if, cmd);
1739 spin_unlock_irq(&rp->lock);
1740 rhine_set_carrier(&rp->mii_if);
1745 static int netdev_nway_reset(struct net_device *dev)
1747 struct rhine_private *rp = netdev_priv(dev);
1749 return mii_nway_restart(&rp->mii_if);
1752 static u32 netdev_get_link(struct net_device *dev)
1754 struct rhine_private *rp = netdev_priv(dev);
1756 return mii_link_ok(&rp->mii_if);
1759 static u32 netdev_get_msglevel(struct net_device *dev)
1764 static void netdev_set_msglevel(struct net_device *dev, u32 value)
1769 static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1771 struct rhine_private *rp = netdev_priv(dev);
1773 if (!(rp->quirks & rqWOL))
1776 spin_lock_irq(&rp->lock);
1777 wol->supported = WAKE_PHY | WAKE_MAGIC |
1778 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
1779 wol->wolopts = rp->wolopts;
1780 spin_unlock_irq(&rp->lock);
1783 static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1785 struct rhine_private *rp = netdev_priv(dev);
1786 u32 support = WAKE_PHY | WAKE_MAGIC |
1787 WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
1789 if (!(rp->quirks & rqWOL))
1792 if (wol->wolopts & ~support)
1795 spin_lock_irq(&rp->lock);
1796 rp->wolopts = wol->wolopts;
1797 spin_unlock_irq(&rp->lock);
1802 static const struct ethtool_ops netdev_ethtool_ops = {
1803 .get_drvinfo = netdev_get_drvinfo,
1804 .get_settings = netdev_get_settings,
1805 .set_settings = netdev_set_settings,
1806 .nway_reset = netdev_nway_reset,
1807 .get_link = netdev_get_link,
1808 .get_msglevel = netdev_get_msglevel,
1809 .set_msglevel = netdev_set_msglevel,
1810 .get_wol = rhine_get_wol,
1811 .set_wol = rhine_set_wol,
1812 .get_sg = ethtool_op_get_sg,
1813 .get_tx_csum = ethtool_op_get_tx_csum,
1816 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1818 struct rhine_private *rp = netdev_priv(dev);
1821 if (!netif_running(dev))
1824 spin_lock_irq(&rp->lock);
1825 rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
1826 spin_unlock_irq(&rp->lock);
1827 rhine_set_carrier(&rp->mii_if);
1832 static int rhine_close(struct net_device *dev)
1834 struct rhine_private *rp = netdev_priv(dev);
1835 void __iomem *ioaddr = rp->base;
1837 spin_lock_irq(&rp->lock);
1839 netif_stop_queue(dev);
1840 netif_poll_disable(dev);
1843 printk(KERN_DEBUG "%s: Shutting down ethercard, "
1844 "status was %4.4x.\n",
1845 dev->name, ioread16(ioaddr + ChipCmd));
1847 /* Switch to loopback mode to avoid hardware races. */
1848 iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
1850 /* Disable interrupts by clearing the interrupt mask. */
1851 iowrite16(0x0000, ioaddr + IntrEnable);
1853 /* Stop the chip's Tx and Rx processes. */
1854 iowrite16(CmdStop, ioaddr + ChipCmd);
1856 spin_unlock_irq(&rp->lock);
1858 free_irq(rp->pdev->irq, dev);
1867 static void __devexit rhine_remove_one(struct pci_dev *pdev)
1869 struct net_device *dev = pci_get_drvdata(pdev);
1870 struct rhine_private *rp = netdev_priv(dev);
1872 unregister_netdev(dev);
1874 pci_iounmap(pdev, rp->base);
1875 pci_release_regions(pdev);
1878 pci_disable_device(pdev);
1879 pci_set_drvdata(pdev, NULL);
1882 static void rhine_shutdown (struct pci_dev *pdev)
1884 struct net_device *dev = pci_get_drvdata(pdev);
1885 struct rhine_private *rp = netdev_priv(dev);
1886 void __iomem *ioaddr = rp->base;
1888 if (!(rp->quirks & rqWOL))
1889 return; /* Nothing to do for non-WOL adapters */
1891 rhine_power_init(dev);
1893 /* Make sure we use pattern 0, 1 and not 4, 5 */
1894 if (rp->quirks & rq6patterns)
1895 iowrite8(0x04, ioaddr + 0xA7);
1897 if (rp->wolopts & WAKE_MAGIC) {
1898 iowrite8(WOLmagic, ioaddr + WOLcrSet);
1900 * Turn EEPROM-controlled wake-up back on -- some hardware may
1901 * not cooperate otherwise.
1903 iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
1906 if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
1907 iowrite8(WOLbmcast, ioaddr + WOLcgSet);
1909 if (rp->wolopts & WAKE_PHY)
1910 iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
1912 if (rp->wolopts & WAKE_UCAST)
1913 iowrite8(WOLucast, ioaddr + WOLcrSet);
1916 /* Enable legacy WOL (for old motherboards) */
1917 iowrite8(0x01, ioaddr + PwcfgSet);
1918 iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
1921 /* Hit power state D3 (sleep) */
1923 iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
1925 /* TODO: Check use of pci_enable_wake() */
1930 static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
1932 struct net_device *dev = pci_get_drvdata(pdev);
1933 struct rhine_private *rp = netdev_priv(dev);
1934 unsigned long flags;
1936 if (!netif_running(dev))
1939 netif_device_detach(dev);
1940 pci_save_state(pdev);
1942 spin_lock_irqsave(&rp->lock, flags);
1943 rhine_shutdown(pdev);
1944 spin_unlock_irqrestore(&rp->lock, flags);
1946 free_irq(dev->irq, dev);
1950 static int rhine_resume(struct pci_dev *pdev)
1952 struct net_device *dev = pci_get_drvdata(pdev);
1953 struct rhine_private *rp = netdev_priv(dev);
1954 unsigned long flags;
1957 if (!netif_running(dev))
1960 if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
1961 printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
1963 ret = pci_set_power_state(pdev, PCI_D0);
1965 printk(KERN_INFO "%s: Entering power state D0 %s (%d).\n",
1966 dev->name, ret ? "failed" : "succeeded", ret);
1968 pci_restore_state(pdev);
1970 spin_lock_irqsave(&rp->lock, flags);
1972 enable_mmio(rp->pioaddr, rp->quirks);
1974 rhine_power_init(dev);
1979 init_registers(dev);
1980 spin_unlock_irqrestore(&rp->lock, flags);
1982 netif_device_attach(dev);
1986 #endif /* CONFIG_PM */
1988 static struct pci_driver rhine_driver = {
1990 .id_table = rhine_pci_tbl,
1991 .probe = rhine_init_one,
1992 .remove = __devexit_p(rhine_remove_one),
1994 .suspend = rhine_suspend,
1995 .resume = rhine_resume,
1996 #endif /* CONFIG_PM */
1997 .shutdown = rhine_shutdown,
2000 static struct dmi_system_id __initdata rhine_dmi_table[] = {
2004 DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
2005 DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
2011 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
2012 DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
2018 static int __init rhine_init(void)
2020 /* when a module, this is printed whether or not devices are found in probe */
2024 if (dmi_check_system(rhine_dmi_table)) {
2025 /* these BIOSes fail at PXE boot if chip is in D3 */
2027 printk(KERN_WARNING "%s: Broken BIOS detected, avoid_D3 "
2032 printk(KERN_INFO "%s: avoid_D3 set.\n", DRV_NAME);
2034 return pci_register_driver(&rhine_driver);
2038 static void __exit rhine_cleanup(void)
2040 pci_unregister_driver(&rhine_driver);
2044 module_init(rhine_init);
2045 module_exit(rhine_cleanup);