Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
[linux-2.6] / drivers / usb / host / ohci-hcd.c
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
6  * 
7  * [ Initialisation is based on Linus'  ]
8  * [ uhci code and gregs ohci fragments ]
9  * [ (C) Copyright 1999 Linus Torvalds  ]
10  * [ (C) Copyright 1999 Gregory P. Smith]
11  * 
12  * 
13  * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
14  * interfaces (though some non-x86 Intel chips use it).  It supports
15  * smarter hardware than UHCI.  A download link for the spec available
16  * through the http://www.usb.org website.
17  *
18  * History:
19  * 
20  * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
21  * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
22  * 2003/02/24 show registers in sysfs (Kevin Brosius)
23  *
24  * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
25  *      bandwidth accounting; if debugging, show schedules in driverfs
26  * 2002/07/19 fixes to management of ED and schedule state.
27  * 2002/06/09 SA-1111 support (Christopher Hoover)
28  * 2002/06/01 remember frame when HC won't see EDs any more; use that info
29  *      to fix urb unlink races caused by interrupt latency assumptions;
30  *      minor ED field and function naming updates
31  * 2002/01/18 package as a patch for 2.5.3; this should match the
32  *      2.4.17 kernel modulo some bugs being fixed.
33  *
34  * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
35  *      from post-2.4.5 patches.
36  * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
37  * 2001/09/07 match PCI PM changes, errnos from Linus' tree
38  * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
39  *      pbook pci quirks gone (please fix pbook pci sw!) (db)
40  *
41  * 2001/04/08 Identify version on module load (gb)
42  * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
43         pci_map_single (db)
44  * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
45  * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
46  *
47  * 2000/09/26 fixed races in removing the private portion of the urb
48  * 2000/09/07 disable bulk and control lists when unlinking the last
49  *      endpoint descriptor in order to avoid unrecoverable errors on
50  *      the Lucent chips. (rwc@sgi)
51  * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
52  *      urb unlink probs, indentation fixes
53  * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
54  *      device unplugs.
55  * 2000/06/28 use PCI hotplug framework, for better power management
56  *      and for Cardbus support (David Brownell)
57  * 2000/earlier:  fixes for NEC/Lucent chips; suspend/resume handling
58  *      when the controller loses power; handle UE; cleanup; ...
59  *
60  * v5.2 1999/12/07 URB 3rd preview, 
61  * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
62  * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume 
63  *      i386: HUB, Keyboard, Mouse, Printer 
64  *
65  * v4.3 1999/10/27 multiple HCs, bulk_request
66  * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
67  * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
68  * v4.0 1999/08/18 
69  * v3.0 1999/06/25 
70  * v2.1 1999/05/09  code clean up
71  * v2.0 1999/05/04 
72  * v1.0 1999/04/27 initial release
73  *
74  * This file is licenced under the GPL.
75  */
76  
77 #include <linux/module.h>
78 #include <linux/moduleparam.h>
79 #include <linux/pci.h>
80 #include <linux/kernel.h>
81 #include <linux/delay.h>
82 #include <linux/ioport.h>
83 #include <linux/sched.h>
84 #include <linux/slab.h>
85 #include <linux/smp_lock.h>
86 #include <linux/errno.h>
87 #include <linux/init.h>
88 #include <linux/timer.h>
89 #include <linux/list.h>
90 #include <linux/usb.h>
91 #include <linux/usb/otg.h>
92 #include <linux/dma-mapping.h> 
93 #include <linux/dmapool.h>
94 #include <linux/reboot.h>
95
96 #include <asm/io.h>
97 #include <asm/irq.h>
98 #include <asm/system.h>
99 #include <asm/unaligned.h>
100 #include <asm/byteorder.h>
101
102 #include "../core/hcd.h"
103
104 #define DRIVER_VERSION "2006 August 04"
105 #define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
106 #define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
107
108 /*-------------------------------------------------------------------------*/
109
110 #undef OHCI_VERBOSE_DEBUG       /* not always helpful */
111
112 /* For initializing controller (mask in an HCFS mode too) */
113 #define OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
114 #define OHCI_INTR_INIT \
115                 (OHCI_INTR_MIE | OHCI_INTR_RHSC | OHCI_INTR_UE \
116                 | OHCI_INTR_RD | OHCI_INTR_WDH)
117
118 #ifdef __hppa__
119 /* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
120 #define IR_DISABLE
121 #endif
122
123 #ifdef CONFIG_ARCH_OMAP
124 /* OMAP doesn't support IR (no SMM; not needed) */
125 #define IR_DISABLE
126 #endif
127
128 /*-------------------------------------------------------------------------*/
129
130 static const char       hcd_name [] = "ohci_hcd";
131
132 #define STATECHANGE_DELAY       msecs_to_jiffies(300)
133
134 #include "ohci.h"
135
136 static void ohci_dump (struct ohci_hcd *ohci, int verbose);
137 static int ohci_init (struct ohci_hcd *ohci);
138 static void ohci_stop (struct usb_hcd *hcd);
139
140 #include "ohci-hub.c"
141 #include "ohci-dbg.c"
142 #include "ohci-mem.c"
143 #include "ohci-q.c"
144
145
146 /*
147  * On architectures with edge-triggered interrupts we must never return
148  * IRQ_NONE.
149  */
150 #if defined(CONFIG_SA1111)  /* ... or other edge-triggered systems */
151 #define IRQ_NOTMINE     IRQ_HANDLED
152 #else
153 #define IRQ_NOTMINE     IRQ_NONE
154 #endif
155
156
157 /* Some boards misreport power switching/overcurrent */
158 static int distrust_firmware = 1;
159 module_param (distrust_firmware, bool, 0);
160 MODULE_PARM_DESC (distrust_firmware,
161         "true to distrust firmware power/overcurrent setup");
162
163 /* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
164 static int no_handshake = 0;
165 module_param (no_handshake, bool, 0);
166 MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
167
168 /*-------------------------------------------------------------------------*/
169
170 /*
171  * queue up an urb for anything except the root hub
172  */
173 static int ohci_urb_enqueue (
174         struct usb_hcd  *hcd,
175         struct usb_host_endpoint *ep,
176         struct urb      *urb,
177         gfp_t           mem_flags
178 ) {
179         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
180         struct ed       *ed;
181         urb_priv_t      *urb_priv;
182         unsigned int    pipe = urb->pipe;
183         int             i, size = 0;
184         unsigned long   flags;
185         int             retval = 0;
186         
187 #ifdef OHCI_VERBOSE_DEBUG
188         urb_print (urb, "SUB", usb_pipein (pipe));
189 #endif
190         
191         /* every endpoint has a ed, locate and maybe (re)initialize it */
192         if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
193                 return -ENOMEM;
194
195         /* for the private part of the URB we need the number of TDs (size) */
196         switch (ed->type) {
197                 case PIPE_CONTROL:
198                         /* td_submit_urb() doesn't yet handle these */
199                         if (urb->transfer_buffer_length > 4096)
200                                 return -EMSGSIZE;
201
202                         /* 1 TD for setup, 1 for ACK, plus ... */
203                         size = 2;
204                         /* FALLTHROUGH */
205                 // case PIPE_INTERRUPT:
206                 // case PIPE_BULK:
207                 default:
208                         /* one TD for every 4096 Bytes (can be upto 8K) */
209                         size += urb->transfer_buffer_length / 4096;
210                         /* ... and for any remaining bytes ... */
211                         if ((urb->transfer_buffer_length % 4096) != 0)
212                                 size++;
213                         /* ... and maybe a zero length packet to wrap it up */
214                         if (size == 0)
215                                 size++;
216                         else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
217                                 && (urb->transfer_buffer_length
218                                         % usb_maxpacket (urb->dev, pipe,
219                                                 usb_pipeout (pipe))) == 0)
220                                 size++;
221                         break;
222                 case PIPE_ISOCHRONOUS: /* number of packets from URB */
223                         size = urb->number_of_packets;
224                         break;
225         }
226
227         /* allocate the private part of the URB */
228         urb_priv = kmalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
229                         mem_flags);
230         if (!urb_priv)
231                 return -ENOMEM;
232         memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
233         INIT_LIST_HEAD (&urb_priv->pending);
234         urb_priv->length = size;
235         urb_priv->ed = ed;      
236
237         /* allocate the TDs (deferring hash chain updates) */
238         for (i = 0; i < size; i++) {
239                 urb_priv->td [i] = td_alloc (ohci, mem_flags);
240                 if (!urb_priv->td [i]) {
241                         urb_priv->length = i;
242                         urb_free_priv (ohci, urb_priv);
243                         return -ENOMEM;
244                 }
245         }       
246
247         spin_lock_irqsave (&ohci->lock, flags);
248
249         /* don't submit to a dead HC */
250         if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
251                 retval = -ENODEV;
252                 goto fail;
253         }
254         if (!HC_IS_RUNNING(hcd->state)) {
255                 retval = -ENODEV;
256                 goto fail;
257         }
258
259         /* in case of unlink-during-submit */
260         spin_lock (&urb->lock);
261         if (urb->status != -EINPROGRESS) {
262                 spin_unlock (&urb->lock);
263                 urb->hcpriv = urb_priv;
264                 finish_urb (ohci, urb, NULL);
265                 retval = 0;
266                 goto fail;
267         }
268
269         /* schedule the ed if needed */
270         if (ed->state == ED_IDLE) {
271                 retval = ed_schedule (ohci, ed);
272                 if (retval < 0)
273                         goto fail0;
274                 if (ed->type == PIPE_ISOCHRONOUS) {
275                         u16     frame = ohci_frame_no(ohci);
276
277                         /* delay a few frames before the first TD */
278                         frame += max_t (u16, 8, ed->interval);
279                         frame &= ~(ed->interval - 1);
280                         frame |= ed->branch;
281                         urb->start_frame = frame;
282
283                         /* yes, only URB_ISO_ASAP is supported, and
284                          * urb->start_frame is never used as input.
285                          */
286                 }
287         } else if (ed->type == PIPE_ISOCHRONOUS)
288                 urb->start_frame = ed->last_iso + ed->interval;
289
290         /* fill the TDs and link them to the ed; and
291          * enable that part of the schedule, if needed
292          * and update count of queued periodic urbs
293          */
294         urb->hcpriv = urb_priv;
295         td_submit_urb (ohci, urb);
296
297 fail0:
298         spin_unlock (&urb->lock);
299 fail:
300         if (retval)
301                 urb_free_priv (ohci, urb_priv);
302         spin_unlock_irqrestore (&ohci->lock, flags);
303         return retval;
304 }
305
306 /*
307  * decouple the URB from the HC queues (TDs, urb_priv); it's
308  * already marked using urb->status.  reporting is always done
309  * asynchronously, and we might be dealing with an urb that's
310  * partially transferred, or an ED with other urbs being unlinked.
311  */
312 static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
313 {
314         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
315         unsigned long           flags;
316         
317 #ifdef OHCI_VERBOSE_DEBUG
318         urb_print (urb, "UNLINK", 1);
319 #endif            
320
321         spin_lock_irqsave (&ohci->lock, flags);
322         if (HC_IS_RUNNING(hcd->state)) {
323                 urb_priv_t  *urb_priv;
324
325                 /* Unless an IRQ completed the unlink while it was being
326                  * handed to us, flag it for unlink and giveback, and force
327                  * some upcoming INTR_SF to call finish_unlinks()
328                  */
329                 urb_priv = urb->hcpriv;
330                 if (urb_priv) {
331                         if (urb_priv->ed->state == ED_OPER)
332                                 start_ed_unlink (ohci, urb_priv->ed);
333                 }
334         } else {
335                 /*
336                  * with HC dead, we won't respect hc queue pointers
337                  * any more ... just clean up every urb's memory.
338                  */
339                 if (urb->hcpriv)
340                         finish_urb (ohci, urb, NULL);
341         }
342         spin_unlock_irqrestore (&ohci->lock, flags);
343         return 0;
344 }
345
346 /*-------------------------------------------------------------------------*/
347
348 /* frees config/altsetting state for endpoints,
349  * including ED memory, dummy TD, and bulk/intr data toggle
350  */
351
352 static void
353 ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
354 {
355         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
356         unsigned long           flags;
357         struct ed               *ed = ep->hcpriv;
358         unsigned                limit = 1000;
359
360         /* ASSERT:  any requests/urbs are being unlinked */
361         /* ASSERT:  nobody can be submitting urbs for this any more */
362
363         if (!ed)
364                 return;
365
366 rescan:
367         spin_lock_irqsave (&ohci->lock, flags);
368
369         if (!HC_IS_RUNNING (hcd->state)) {
370 sanitize:
371                 ed->state = ED_IDLE;
372                 finish_unlinks (ohci, 0, NULL);
373         }
374
375         switch (ed->state) {
376         case ED_UNLINK:         /* wait for hw to finish? */
377                 /* major IRQ delivery trouble loses INTR_SF too... */
378                 if (limit-- == 0) {
379                         ohci_warn (ohci, "IRQ INTR_SF lossage\n");
380                         goto sanitize;
381                 }
382                 spin_unlock_irqrestore (&ohci->lock, flags);
383                 schedule_timeout_uninterruptible(1);
384                 goto rescan;
385         case ED_IDLE:           /* fully unlinked */
386                 if (list_empty (&ed->td_list)) {
387                         td_free (ohci, ed->dummy);
388                         ed_free (ohci, ed);
389                         break;
390                 }
391                 /* else FALL THROUGH */
392         default:
393                 /* caller was supposed to have unlinked any requests;
394                  * that's not our job.  can't recover; must leak ed.
395                  */
396                 ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
397                         ed, ep->desc.bEndpointAddress, ed->state,
398                         list_empty (&ed->td_list) ? "" : " (has tds)");
399                 td_free (ohci, ed->dummy);
400                 break;
401         }
402         ep->hcpriv = NULL;
403         spin_unlock_irqrestore (&ohci->lock, flags);
404         return;
405 }
406
407 static int ohci_get_frame (struct usb_hcd *hcd)
408 {
409         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
410
411         return ohci_frame_no(ohci);
412 }
413
414 static void ohci_usb_reset (struct ohci_hcd *ohci)
415 {
416         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
417         ohci->hc_control &= OHCI_CTRL_RWC;
418         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
419 }
420
421 /* ohci_shutdown forcibly disables IRQs and DMA, helping kexec and
422  * other cases where the next software may expect clean state from the
423  * "firmware".  this is bus-neutral, unlike shutdown() methods.
424  */
425 static void
426 ohci_shutdown (struct usb_hcd *hcd)
427 {
428         struct ohci_hcd *ohci;
429
430         ohci = hcd_to_ohci (hcd);
431         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
432         ohci_usb_reset (ohci);
433         /* flush the writes */
434         (void) ohci_readl (ohci, &ohci->regs->control);
435 }
436
437 /*-------------------------------------------------------------------------*
438  * HC functions
439  *-------------------------------------------------------------------------*/
440
441 /* init memory, and kick BIOS/SMM off */
442
443 static int ohci_init (struct ohci_hcd *ohci)
444 {
445         int ret;
446         struct usb_hcd *hcd = ohci_to_hcd(ohci);
447
448         disable (ohci);
449         ohci->regs = hcd->regs;
450
451         /* REVISIT this BIOS handshake is now moved into PCI "quirks", and
452          * was never needed for most non-PCI systems ... remove the code?
453          */
454
455 #ifndef IR_DISABLE
456         /* SMM owns the HC?  not for long! */
457         if (!no_handshake && ohci_readl (ohci,
458                                         &ohci->regs->control) & OHCI_CTRL_IR) {
459                 u32 temp;
460
461                 ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
462
463                 /* this timeout is arbitrary.  we make it long, so systems
464                  * depending on usb keyboards may be usable even if the
465                  * BIOS/SMM code seems pretty broken.
466                  */
467                 temp = 500;     /* arbitrary: five seconds */
468
469                 ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
470                 ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
471                 while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
472                         msleep (10);
473                         if (--temp == 0) {
474                                 ohci_err (ohci, "USB HC takeover failed!"
475                                         "  (BIOS/SMM bug)\n");
476                                 return -EBUSY;
477                         }
478                 }
479                 ohci_usb_reset (ohci);
480         }
481 #endif
482
483         /* Disable HC interrupts */
484         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
485
486         /* flush the writes, and save key bits like RWC */
487         if (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_RWC)
488                 ohci->hc_control |= OHCI_CTRL_RWC;
489
490         /* Read the number of ports unless overridden */
491         if (ohci->num_ports == 0)
492                 ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
493
494         if (ohci->hcca)
495                 return 0;
496
497         ohci->hcca = dma_alloc_coherent (hcd->self.controller,
498                         sizeof *ohci->hcca, &ohci->hcca_dma, 0);
499         if (!ohci->hcca)
500                 return -ENOMEM;
501
502         if ((ret = ohci_mem_init (ohci)) < 0)
503                 ohci_stop (hcd);
504         else {
505                 create_debug_files (ohci);
506         }
507
508         return ret;
509 }
510
511 /*-------------------------------------------------------------------------*/
512
513 /* Start an OHCI controller, set the BUS operational
514  * resets USB and controller
515  * enable interrupts 
516  */
517 static int ohci_run (struct ohci_hcd *ohci)
518 {
519         u32                     mask, temp;
520         int                     first = ohci->fminterval == 0;
521         struct usb_hcd          *hcd = ohci_to_hcd(ohci);
522
523         disable (ohci);
524
525         /* boot firmware should have set this up (5.1.1.3.1) */
526         if (first) {
527
528                 temp = ohci_readl (ohci, &ohci->regs->fminterval);
529                 ohci->fminterval = temp & 0x3fff;
530                 if (ohci->fminterval != FI)
531                         ohci_dbg (ohci, "fminterval delta %d\n",
532                                 ohci->fminterval - FI);
533                 ohci->fminterval |= FSMP (ohci->fminterval) << 16;
534                 /* also: power/overcurrent flags in roothub.a */
535         }
536
537         /* Reset USB nearly "by the book".  RemoteWakeupConnected was
538          * saved if boot firmware (BIOS/SMM/...) told us it's connected,
539          * or if bus glue did the same (e.g. for PCI add-in cards with
540          * PCI PM support).
541          */
542         ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
543                         hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
544                         ohci_readl (ohci, &ohci->regs->control));
545         if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
546                         && !device_may_wakeup(hcd->self.controller))
547                 device_init_wakeup(hcd->self.controller, 1);
548
549         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
550         case OHCI_USB_OPER:
551                 temp = 0;
552                 break;
553         case OHCI_USB_SUSPEND:
554         case OHCI_USB_RESUME:
555                 ohci->hc_control &= OHCI_CTRL_RWC;
556                 ohci->hc_control |= OHCI_USB_RESUME;
557                 temp = 10 /* msec wait */;
558                 break;
559         // case OHCI_USB_RESET:
560         default:
561                 ohci->hc_control &= OHCI_CTRL_RWC;
562                 ohci->hc_control |= OHCI_USB_RESET;
563                 temp = 50 /* msec wait */;
564                 break;
565         }
566         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
567         // flush the writes
568         (void) ohci_readl (ohci, &ohci->regs->control);
569         msleep(temp);
570         temp = roothub_a (ohci);
571         if (!(temp & RH_A_NPS)) {
572                 /* power down each port */
573                 for (temp = 0; temp < ohci->num_ports; temp++)
574                         ohci_writel (ohci, RH_PS_LSDA,
575                                 &ohci->regs->roothub.portstatus [temp]);
576         }
577         // flush those writes
578         (void) ohci_readl (ohci, &ohci->regs->control);
579         memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
580
581         /* 2msec timelimit here means no irqs/preempt */
582         spin_lock_irq (&ohci->lock);
583
584 retry:
585         /* HC Reset requires max 10 us delay */
586         ohci_writel (ohci, OHCI_HCR,  &ohci->regs->cmdstatus);
587         temp = 30;      /* ... allow extra time */
588         while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
589                 if (--temp == 0) {
590                         spin_unlock_irq (&ohci->lock);
591                         ohci_err (ohci, "USB HC reset timed out!\n");
592                         return -1;
593                 }
594                 udelay (1);
595         }
596
597         /* now we're in the SUSPEND state ... must go OPERATIONAL
598          * within 2msec else HC enters RESUME
599          *
600          * ... but some hardware won't init fmInterval "by the book"
601          * (SiS, OPTi ...), so reset again instead.  SiS doesn't need
602          * this if we write fmInterval after we're OPERATIONAL.
603          * Unclear about ALi, ServerWorks, and others ... this could
604          * easily be a longstanding bug in chip init on Linux.
605          */
606         if (ohci->flags & OHCI_QUIRK_INITRESET) {
607                 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
608                 // flush those writes
609                 (void) ohci_readl (ohci, &ohci->regs->control);
610         }
611
612         /* Tell the controller where the control and bulk lists are
613          * The lists are empty now. */
614         ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
615         ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
616
617         /* a reset clears this */
618         ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
619
620         periodic_reinit (ohci);
621
622         /* some OHCI implementations are finicky about how they init.
623          * bogus values here mean not even enumeration could work.
624          */
625         if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
626                         || !ohci_readl (ohci, &ohci->regs->periodicstart)) {
627                 if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
628                         ohci->flags |= OHCI_QUIRK_INITRESET;
629                         ohci_dbg (ohci, "enabling initreset quirk\n");
630                         goto retry;
631                 }
632                 spin_unlock_irq (&ohci->lock);
633                 ohci_err (ohci, "init err (%08x %04x)\n",
634                         ohci_readl (ohci, &ohci->regs->fminterval),
635                         ohci_readl (ohci, &ohci->regs->periodicstart));
636                 return -EOVERFLOW;
637         }
638
639         /* use rhsc irqs after khubd is fully initialized */
640         hcd->poll_rh = 1;
641         hcd->uses_new_polling = 1;
642
643         /* start controller operations */
644         ohci->hc_control &= OHCI_CTRL_RWC;
645         ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
646         ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
647         hcd->state = HC_STATE_RUNNING;
648
649         /* wake on ConnectStatusChange, matching external hubs */
650         ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
651
652         /* Choose the interrupts we care about now, others later on demand */
653         mask = OHCI_INTR_INIT;
654         ohci_writel (ohci, ~0, &ohci->regs->intrstatus);
655         ohci_writel (ohci, mask, &ohci->regs->intrenable);
656
657         /* handle root hub init quirks ... */
658         temp = roothub_a (ohci);
659         temp &= ~(RH_A_PSM | RH_A_OCPM);
660         if (ohci->flags & OHCI_QUIRK_SUPERIO) {
661                 /* NSC 87560 and maybe others */
662                 temp |= RH_A_NOCP;
663                 temp &= ~(RH_A_POTPGT | RH_A_NPS);
664                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
665         } else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
666                 /* hub power always on; required for AMD-756 and some
667                  * Mac platforms.  ganged overcurrent reporting, if any.
668                  */
669                 temp |= RH_A_NPS;
670                 ohci_writel (ohci, temp, &ohci->regs->roothub.a);
671         }
672         ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
673         ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
674                                                 &ohci->regs->roothub.b);
675         // flush those writes
676         (void) ohci_readl (ohci, &ohci->regs->control);
677
678         ohci->next_statechange = jiffies + STATECHANGE_DELAY;
679         spin_unlock_irq (&ohci->lock);
680
681         // POTPGT delay is bits 24-31, in 2 ms units.
682         mdelay ((temp >> 23) & 0x1fe);
683         hcd->state = HC_STATE_RUNNING;
684
685         ohci_dump (ohci, 1);
686
687         return 0;
688 }
689
690 /*-------------------------------------------------------------------------*/
691
692 /* an interrupt happens */
693
694 static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
695 {
696         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
697         struct ohci_regs __iomem *regs = ohci->regs;
698         int                     ints; 
699
700         /* we can eliminate a (slow) ohci_readl()
701            if _only_ WDH caused this irq */
702         if ((ohci->hcca->done_head != 0)
703                         && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
704                                 & 0x01)) {
705                 ints =  OHCI_INTR_WDH;
706
707         /* cardbus/... hardware gone before remove() */
708         } else if ((ints = ohci_readl (ohci, &regs->intrstatus)) == ~(u32)0) {
709                 disable (ohci);
710                 ohci_dbg (ohci, "device removed!\n");
711                 return IRQ_HANDLED;
712
713         /* interrupt for some other device? */
714         } else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
715                 return IRQ_NOTMINE;
716         }
717
718         if (ints & OHCI_INTR_RHSC) {
719                 ohci_vdbg (ohci, "rhsc\n");
720                 ohci->next_statechange = jiffies + STATECHANGE_DELAY;
721                 ohci_writel (ohci, OHCI_INTR_RHSC, &regs->intrstatus);
722                 usb_hcd_poll_rh_status(hcd);
723         }
724
725         if (ints & OHCI_INTR_UE) {
726                 disable (ohci);
727                 ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
728                 // e.g. due to PCI Master/Target Abort
729
730                 ohci_dump (ohci, 1);
731                 ohci_usb_reset (ohci);
732         }
733
734         if (ints & OHCI_INTR_RD) {
735                 ohci_vdbg (ohci, "resume detect\n");
736                 ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
737                 hcd->poll_rh = 1;
738                 if (ohci->autostop) {
739                         spin_lock (&ohci->lock);
740                         ohci_rh_resume (ohci);
741                         spin_unlock (&ohci->lock);
742                 } else
743                         usb_hcd_resume_root_hub(hcd);
744         }
745
746         if (ints & OHCI_INTR_WDH) {
747                 if (HC_IS_RUNNING(hcd->state))
748                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);
749                 spin_lock (&ohci->lock);
750                 dl_done_list (ohci, ptregs);
751                 spin_unlock (&ohci->lock);
752                 if (HC_IS_RUNNING(hcd->state))
753                         ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable); 
754         }
755   
756         /* could track INTR_SO to reduce available PCI/... bandwidth */
757
758         /* handle any pending URB/ED unlinks, leaving INTR_SF enabled
759          * when there's still unlinking to be done (next frame).
760          */
761         spin_lock (&ohci->lock);
762         if (ohci->ed_rm_list)
763                 finish_unlinks (ohci, ohci_frame_no(ohci), ptregs);
764         if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
765                         && HC_IS_RUNNING(hcd->state))
766                 ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);   
767         spin_unlock (&ohci->lock);
768
769         if (HC_IS_RUNNING(hcd->state)) {
770                 ohci_writel (ohci, ints, &regs->intrstatus);
771                 ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);   
772                 // flush those writes
773                 (void) ohci_readl (ohci, &ohci->regs->control);
774         }
775
776         return IRQ_HANDLED;
777 }
778
779 /*-------------------------------------------------------------------------*/
780
781 static void ohci_stop (struct usb_hcd *hcd)
782 {       
783         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
784
785         ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
786                 hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
787                 hcd->state);
788         ohci_dump (ohci, 1);
789
790         flush_scheduled_work();
791
792         ohci_usb_reset (ohci);
793         ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
794         free_irq(hcd->irq, hcd);
795         hcd->irq = -1;
796
797         remove_debug_files (ohci);
798         ohci_mem_cleanup (ohci);
799         if (ohci->hcca) {
800                 dma_free_coherent (hcd->self.controller, 
801                                 sizeof *ohci->hcca, 
802                                 ohci->hcca, ohci->hcca_dma);
803                 ohci->hcca = NULL;
804                 ohci->hcca_dma = 0;
805         }
806 }
807
808 /*-------------------------------------------------------------------------*/
809
810 /* must not be called from interrupt context */
811
812 #ifdef  CONFIG_PM
813
814 static int ohci_restart (struct ohci_hcd *ohci)
815 {
816         int temp;
817         int i;
818         struct urb_priv *priv;
819
820         /* mark any devices gone, so they do nothing till khubd disconnects.
821          * recycle any "live" eds/tds (and urbs) right away.
822          * later, khubd disconnect processing will recycle the other state,
823          * (either as disconnect/reconnect, or maybe someday as a reset).
824          */ 
825         spin_lock_irq(&ohci->lock);
826         disable (ohci);
827         usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
828         if (!list_empty (&ohci->pending))
829                 ohci_dbg(ohci, "abort schedule...\n");
830         list_for_each_entry (priv, &ohci->pending, pending) {
831                 struct urb      *urb = priv->td[0]->urb;
832                 struct ed       *ed = priv->ed;
833
834                 switch (ed->state) {
835                 case ED_OPER:
836                         ed->state = ED_UNLINK;
837                         ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
838                         ed_deschedule (ohci, ed);
839
840                         ed->ed_next = ohci->ed_rm_list;
841                         ed->ed_prev = NULL;
842                         ohci->ed_rm_list = ed;
843                         /* FALLTHROUGH */
844                 case ED_UNLINK:
845                         break;
846                 default:
847                         ohci_dbg(ohci, "bogus ed %p state %d\n",
848                                         ed, ed->state);
849                 }
850
851                 spin_lock (&urb->lock);
852                 urb->status = -ESHUTDOWN;
853                 spin_unlock (&urb->lock);
854         }
855         finish_unlinks (ohci, 0, NULL);
856         spin_unlock_irq(&ohci->lock);
857
858         /* paranoia, in case that didn't work: */
859
860         /* empty the interrupt branches */
861         for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
862         for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
863         
864         /* no EDs to remove */
865         ohci->ed_rm_list = NULL;
866
867         /* empty control and bulk lists */       
868         ohci->ed_controltail = NULL;
869         ohci->ed_bulktail    = NULL;
870
871         if ((temp = ohci_run (ohci)) < 0) {
872                 ohci_err (ohci, "can't restart, %d\n", temp);
873                 return temp;
874         } else {
875                 /* here we "know" root ports should always stay powered,
876                  * and that if we try to turn them back on the root hub
877                  * will respond to CSC processing.
878                  */
879                 i = ohci->num_ports;
880                 while (i--)
881                         ohci_writel (ohci, RH_PS_PSS,
882                                 &ohci->regs->roothub.portstatus [i]);
883                 ohci_dbg (ohci, "restart complete\n");
884         }
885         return 0;
886 }
887 #endif
888
889 /*-------------------------------------------------------------------------*/
890
891 #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
892
893 MODULE_AUTHOR (DRIVER_AUTHOR);
894 MODULE_DESCRIPTION (DRIVER_INFO);
895 MODULE_LICENSE ("GPL");
896
897 #ifdef CONFIG_PCI
898 #include "ohci-pci.c"
899 #endif
900
901 #ifdef CONFIG_SA1111
902 #include "ohci-sa1111.c"
903 #endif
904
905 #ifdef CONFIG_ARCH_S3C2410
906 #include "ohci-s3c2410.c"
907 #endif
908
909 #ifdef CONFIG_ARCH_OMAP
910 #include "ohci-omap.c"
911 #endif
912
913 #ifdef CONFIG_ARCH_LH7A404
914 #include "ohci-lh7a404.c"
915 #endif
916
917 #ifdef CONFIG_PXA27x
918 #include "ohci-pxa27x.c"
919 #endif
920
921 #ifdef CONFIG_ARCH_EP93XX
922 #include "ohci-ep93xx.c"
923 #endif
924
925 #ifdef CONFIG_SOC_AU1X00
926 #include "ohci-au1xxx.c"
927 #endif
928
929 #ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
930 #include "ohci-ppc-soc.c"
931 #endif
932
933 #if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
934 #include "ohci-at91.c"
935 #endif
936
937 #ifdef CONFIG_ARCH_PNX4008
938 #include "ohci-pnx4008.c"
939 #endif
940
941 #if !(defined(CONFIG_PCI) \
942       || defined(CONFIG_SA1111) \
943       || defined(CONFIG_ARCH_S3C2410) \
944       || defined(CONFIG_ARCH_OMAP) \
945       || defined (CONFIG_ARCH_LH7A404) \
946       || defined (CONFIG_PXA27x) \
947       || defined (CONFIG_ARCH_EP93XX) \
948       || defined (CONFIG_SOC_AU1X00) \
949       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
950       || defined (CONFIG_ARCH_AT91RM9200) \
951       || defined (CONFIG_ARCH_AT91SAM9261) \
952       || defined (CONFIG_ARCH_PNX4008) \
953         )
954 #error "missing bus glue for ohci-hcd"
955 #endif