git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-at91.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  *  Copyright (C) 2004 SAN People (Pty) Ltd.
   5  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   6  *
   7  * AT91RM9200 Bus Glue
   8  *
   9  * Based on fragments of 2.4 driver by Rick Bronson.
  10  * Based on ohci-omap.c
  11  *
  12  * This file is licenced under the GPL.
  13  */
  14
  15 #include <linux/clk.h>
  16 #include <linux/platform_device.h>
  17
  18 #include <asm/mach-types.h>
  19 #include <asm/hardware.h>
  20 #include <asm/arch/board.h>
  21
  22 #ifndef CONFIG_ARCH_AT91RM9200
  23 #error "CONFIG_ARCH_AT91RM9200 must be defined."
  24 #endif
  25
  26 /* interface and function clocks */
  27 static struct clk *iclk, *fclk;
  28
  29 extern int usb_disabled(void);
  30
  31 /*-------------------------------------------------------------------------*/
  32
  33 static void at91_start_hc(struct platform_device *pdev)
  34 {
  35         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  36         struct ohci_regs __iomem *regs = hcd->regs;
  37
  38         dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
  39
  40         /*
  41          * Start the USB clocks.
  42          */
  43         clk_enable(iclk);
  44         clk_enable(fclk);
  45
  46         /*
  47          * The USB host controller must remain in reset.
  48          */
  49         writel(0, &regs->control);
  50 }
  51
  52 static void at91_stop_hc(struct platform_device *pdev)
  53 {
  54         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  55         struct ohci_regs __iomem *regs = hcd->regs;
  56
  57         dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
  58
  59         /*
  60          * Put the USB host controller into reset.
  61          */
  62         writel(0, &regs->control);
  63
  64         /*
  65          * Stop the USB clocks.
  66          */
  67         clk_disable(fclk);
  68         clk_disable(iclk);
  69 }
  70
  71
  72 /*-------------------------------------------------------------------------*/
  73
  74 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
  75
  76 /* configure so an HC device and id are always provided */
  77 /* always called with process context; sleeping is OK */
  78
  79
  80 /**
  81  * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
  82  * Context: !in_interrupt()
  83  *
  84  * Allocates basic resources for this USB host controller, and
  85  * then invokes the start() method for the HCD associated with it
  86  * through the hotplug entry's driver_data.
  87  */
  88 int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
  89 {
  90         int retval;
  91         struct usb_hcd *hcd = NULL;
  92
  93         if (pdev->num_resources != 2) {
  94                 pr_debug("hcd probe: invalid num_resources");
  95                 return -ENODEV;
  96         }
  97
  98         if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
  99                 pr_debug("hcd probe: invalid resource type\n");
 100                 return -ENODEV;
 101         }
 102
 103         hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
 104         if (!hcd)
 105                 return -ENOMEM;
 106         hcd->rsrc_start = pdev->resource[0].start;
 107         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 108
 109         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 110                 pr_debug("request_mem_region failed\n");
 111                 retval = -EBUSY;
 112                 goto err1;
 113         }
 114
 115         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 116         if (!hcd->regs) {
 117                 pr_debug("ioremap failed\n");
 118                 retval = -EIO;
 119                 goto err2;
 120         }
 121
 122         iclk = clk_get(&pdev->dev, "ohci_clk");
 123         fclk = clk_get(&pdev->dev, "uhpck");
 124
 125         at91_start_hc(pdev);
 126         ohci_hcd_init(hcd_to_ohci(hcd));
 127
 128         retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
 129         if (retval == 0)
 130                 return retval;
 131
 132         /* Error handling */
 133         at91_stop_hc(pdev);
 134
 135         clk_put(fclk);
 136         clk_put(iclk);
 137
 138         iounmap(hcd->regs);
 139
 140  err2:
 141         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 142
 143  err1:
 144         usb_put_hcd(hcd);
 145         return retval;
 146 }
 147
 148
 149 /* may be called with controller, bus, and devices active */
 150
 151 /**
 152  * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
 153  * @dev: USB Host Controller being removed
 154  * Context: !in_interrupt()
 155  *
 156  * Reverses the effect of usb_hcd_at91_probe(), first invoking
 157  * the HCD's stop() method.  It is always called from a thread
 158  * context, normally "rmmod", "apmd", or something similar.
 159  *
 160  */
 161 static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 162 {
 163         usb_remove_hcd(hcd);
 164         at91_stop_hc(pdev);
 165         iounmap(hcd->regs);
 166         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 167
 168         clk_put(fclk);
 169         clk_put(iclk);
 170         fclk = iclk = NULL;
 171
 172         dev_set_drvdata(&pdev->dev, NULL);
 173         return 0;
 174 }
 175
 176 /*-------------------------------------------------------------------------*/
 177
 178 static int __devinit
 179 ohci_at91_start (struct usb_hcd *hcd)
 180 {
 181 //      struct at91_ohci_data   *board = hcd->self.controller->platform_data;
 182         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 183         int                     ret;
 184
 185         if ((ret = ohci_init(ohci)) < 0)
 186                 return ret;
 187
 188         if ((ret = ohci_run(ohci)) < 0) {
 189                 err("can't start %s", hcd->self.bus_name);
 190                 ohci_stop(hcd);
 191                 return ret;
 192         }
 193 //      hcd->self.root_hub->maxchild = board->ports;
 194         return 0;
 195 }
 196
 197 /*-------------------------------------------------------------------------*/
 198
 199 static const struct hc_driver ohci_at91_hc_driver = {
 200         .description =          hcd_name,
 201         .product_desc =         "AT91RM9200 OHCI",
 202         .hcd_priv_size =        sizeof(struct ohci_hcd),
 203
 204         /*
 205          * generic hardware linkage
 206          */
 207         .irq =                  ohci_irq,
 208         .flags =                HCD_USB11 | HCD_MEMORY,
 209
 210         /*
 211          * basic lifecycle operations
 212          */
 213         .start =                ohci_at91_start,
 214         .stop =                 ohci_stop,
 215
 216         /*
 217          * managing i/o requests and associated device resources
 218          */
 219         .urb_enqueue =          ohci_urb_enqueue,
 220         .urb_dequeue =          ohci_urb_dequeue,
 221         .endpoint_disable =     ohci_endpoint_disable,
 222
 223         /*
 224          * scheduling support
 225          */
 226         .get_frame_number =     ohci_get_frame,
 227
 228         /*
 229          * root hub support
 230          */
 231         .hub_status_data =      ohci_hub_status_data,
 232         .hub_control =          ohci_hub_control,
 233
 234 #ifdef CONFIG_PM
 235         .bus_suspend =          ohci_bus_suspend,
 236         .bus_resume =           ohci_bus_resume,
 237 #endif
 238         .start_port_reset =     ohci_start_port_reset,
 239 };
 240
 241 /*-------------------------------------------------------------------------*/
 242
 243 static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
 244 {
 245         return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
 246 }
 247
 248 static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
 249 {
 250         return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
 251 }
 252
 253 #ifdef CONFIG_PM
 254
 255 /* REVISIT suspend/resume look "too" simple here */
 256
 257 static int
 258 ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
 259 {
 260         clk_disable(fclk);
 261         clk_disable(iclk);
 262
 263         return 0;
 264 }
 265
 266 static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
 267 {
 268         clk_enable(iclk);
 269         clk_enable(fclk);
 270
 271         return 0;
 272 }
 273 #else
 274 #define ohci_hcd_at91_drv_suspend NULL
 275 #define ohci_hcd_at91_drv_resume  NULL
 276 #endif
 277
 278 MODULE_ALIAS("at91rm9200-ohci");
 279
 280 static struct platform_driver ohci_hcd_at91_driver = {
 281         .probe          = ohci_hcd_at91_drv_probe,
 282         .remove         = ohci_hcd_at91_drv_remove,
 283         .suspend        = ohci_hcd_at91_drv_suspend,
 284         .resume         = ohci_hcd_at91_drv_resume,
 285         .driver         = {
 286                 .name   = "at91rm9200-ohci",
 287                 .owner  = THIS_MODULE,
 288         },
 289 };
 290
 291 static int __init ohci_hcd_at91_init (void)
 292 {
 293         if (usb_disabled())
 294                 return -ENODEV;
 295
 296         return platform_driver_register(&ohci_hcd_at91_driver);
 297 }
 298
 299 static void __exit ohci_hcd_at91_cleanup (void)
 300 {
 301         platform_driver_unregister(&ohci_hcd_at91_driver);
 302 }
 303
 304 module_init (ohci_hcd_at91_init);
 305 module_exit (ohci_hcd_at91_cleanup);