1 /******************************************************************************
3 * Copyright(c) 2003 - 2008 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * James P. Ketrenos <ipw2100-admin@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/version.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/dma-mapping.h>
36 #include <linux/delay.h>
37 #include <linux/skbuff.h>
38 #include <linux/netdevice.h>
39 #include <linux/wireless.h>
40 #include <linux/firmware.h>
41 #include <linux/etherdevice.h>
42 #include <linux/if_arp.h>
44 #include <net/ieee80211_radiotap.h>
45 #include <net/mac80211.h>
47 #include <asm/div64.h>
49 #include "iwl-3945-core.h"
51 #include "iwl-helpers.h"
53 #ifdef CONFIG_IWL3945_DEBUG
54 u32 iwl3945_debug_level;
57 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
58 struct iwl3945_tx_queue *txq);
60 /******************************************************************************
64 ******************************************************************************/
66 /* module parameters */
67 static int iwl3945_param_disable_hw_scan; /* def: 0 = use 3945's h/w scan */
68 static int iwl3945_param_debug; /* def: 0 = minimal debug log messages */
69 static int iwl3945_param_disable; /* def: 0 = enable radio */
70 static int iwl3945_param_antenna; /* def: 0 = both antennas (use diversity) */
71 int iwl3945_param_hwcrypto; /* def: 0 = use software encryption */
72 static int iwl3945_param_qos_enable = 1; /* def: 1 = use quality of service */
73 int iwl3945_param_queues_num = IWL39_MAX_NUM_QUEUES; /* def: 8 Tx queues */
76 * module name, copyright, version, etc.
77 * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk
80 #define DRV_DESCRIPTION \
81 "Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
83 #ifdef CONFIG_IWL3945_DEBUG
89 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
95 #define IWLWIFI_VERSION "1.2.26k" VD VS
96 #define DRV_COPYRIGHT "Copyright(c) 2003-2008 Intel Corporation"
97 #define DRV_VERSION IWLWIFI_VERSION
100 MODULE_DESCRIPTION(DRV_DESCRIPTION);
101 MODULE_VERSION(DRV_VERSION);
102 MODULE_AUTHOR(DRV_COPYRIGHT);
103 MODULE_LICENSE("GPL");
105 static const struct ieee80211_supported_band *iwl3945_get_band(
106 struct iwl3945_priv *priv, enum ieee80211_band band)
108 return priv->hw->wiphy->bands[band];
111 static int iwl3945_is_empty_essid(const char *essid, int essid_len)
113 /* Single white space is for Linksys APs */
114 if (essid_len == 1 && essid[0] == ' ')
117 /* Otherwise, if the entire essid is 0, we assume it is hidden */
120 if (essid[essid_len] != '\0')
127 static const char *iwl3945_escape_essid(const char *essid, u8 essid_len)
129 static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
130 const char *s = essid;
133 if (iwl3945_is_empty_essid(essid, essid_len)) {
134 memcpy(escaped, "<hidden>", sizeof("<hidden>"));
138 essid_len = min(essid_len, (u8) IW_ESSID_MAX_SIZE);
139 while (essid_len--) {
151 /*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
154 * Theory of operation
156 * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
157 * of buffer descriptors, each of which points to one or more data buffers for
158 * the device to read from or fill. Driver and device exchange status of each
159 * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
160 * entries in each circular buffer, to protect against confusing empty and full
163 * The device reads or writes the data in the queues via the device's several
164 * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
166 * For Tx queue, there are low mark and high mark limits. If, after queuing
167 * the packet for Tx, free space become < low mark, Tx queue stopped. When
168 * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
171 * The 3945 operates with six queues: One receive queue, one transmit queue
172 * (#4) for sending commands to the device firmware, and four transmit queues
173 * (#0-3) for data tx via EDCA. An additional 2 HCCA queues are unused.
174 ***************************************************/
176 int iwl3945_queue_space(const struct iwl3945_queue *q)
178 int s = q->read_ptr - q->write_ptr;
180 if (q->read_ptr > q->write_ptr)
185 /* keep some reserve to not confuse empty and full situations */
192 int iwl3945_x2_queue_used(const struct iwl3945_queue *q, int i)
194 return q->write_ptr > q->read_ptr ?
195 (i >= q->read_ptr && i < q->write_ptr) :
196 !(i < q->read_ptr && i >= q->write_ptr);
200 static inline u8 get_cmd_index(struct iwl3945_queue *q, u32 index, int is_huge)
202 /* This is for scan command, the big buffer at end of command array */
204 return q->n_window; /* must be power of 2 */
206 /* Otherwise, use normal size buffers */
207 return index & (q->n_window - 1);
211 * iwl3945_queue_init - Initialize queue's high/low-water and read/write indexes
213 static int iwl3945_queue_init(struct iwl3945_priv *priv, struct iwl3945_queue *q,
214 int count, int slots_num, u32 id)
217 q->n_window = slots_num;
220 /* count must be power-of-two size, otherwise iwl_queue_inc_wrap
221 * and iwl_queue_dec_wrap are broken. */
222 BUG_ON(!is_power_of_2(count));
224 /* slots_num must be power-of-two size, otherwise
225 * get_cmd_index is broken. */
226 BUG_ON(!is_power_of_2(slots_num));
228 q->low_mark = q->n_window / 4;
232 q->high_mark = q->n_window / 8;
233 if (q->high_mark < 2)
236 q->write_ptr = q->read_ptr = 0;
242 * iwl3945_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
244 static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv,
245 struct iwl3945_tx_queue *txq, u32 id)
247 struct pci_dev *dev = priv->pci_dev;
249 /* Driver private data, only for Tx (not command) queues,
250 * not shared with device. */
251 if (id != IWL_CMD_QUEUE_NUM) {
252 txq->txb = kmalloc(sizeof(txq->txb[0]) *
253 TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
255 IWL_ERROR("kmalloc for auxiliary BD "
256 "structures failed\n");
262 /* Circular buffer of transmit frame descriptors (TFDs),
263 * shared with device */
264 txq->bd = pci_alloc_consistent(dev,
265 sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX,
269 IWL_ERROR("pci_alloc_consistent(%zd) failed\n",
270 sizeof(txq->bd[0]) * TFD_QUEUE_SIZE_MAX);
287 * iwl3945_tx_queue_init - Allocate and initialize one tx/cmd queue
289 int iwl3945_tx_queue_init(struct iwl3945_priv *priv,
290 struct iwl3945_tx_queue *txq, int slots_num, u32 txq_id)
292 struct pci_dev *dev = priv->pci_dev;
297 * Alloc buffer array for commands (Tx or other types of commands).
298 * For the command queue (#4), allocate command space + one big
299 * command for scan, since scan command is very huge; the system will
300 * not have two scans at the same time, so only one is needed.
301 * For data Tx queues (all other queues), no super-size command
304 len = sizeof(struct iwl3945_cmd) * slots_num;
305 if (txq_id == IWL_CMD_QUEUE_NUM)
306 len += IWL_MAX_SCAN_SIZE;
307 txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd);
311 /* Alloc driver data array and TFD circular buffer */
312 rc = iwl3945_tx_queue_alloc(priv, txq, txq_id);
314 pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
318 txq->need_update = 0;
320 /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
321 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
322 BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
324 /* Initialize queue high/low-water, head/tail indexes */
325 iwl3945_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
327 /* Tell device where to find queue, enable DMA channel. */
328 iwl3945_hw_tx_queue_init(priv, txq);
334 * iwl3945_tx_queue_free - Deallocate DMA queue.
335 * @txq: Transmit queue to deallocate.
337 * Empty queue by removing and destroying all BD's.
339 * 0-fill, but do not free "txq" descriptor structure.
341 void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *txq)
343 struct iwl3945_queue *q = &txq->q;
344 struct pci_dev *dev = priv->pci_dev;
350 /* first, empty all BD's */
351 for (; q->write_ptr != q->read_ptr;
352 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
353 iwl3945_hw_txq_free_tfd(priv, txq);
355 len = sizeof(struct iwl3945_cmd) * q->n_window;
356 if (q->id == IWL_CMD_QUEUE_NUM)
357 len += IWL_MAX_SCAN_SIZE;
359 /* De-alloc array of command/tx buffers */
360 pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd);
362 /* De-alloc circular buffer of TFDs */
364 pci_free_consistent(dev, sizeof(struct iwl3945_tfd_frame) *
365 txq->q.n_bd, txq->bd, txq->q.dma_addr);
367 /* De-alloc array of per-TFD driver data */
373 /* 0-fill queue descriptor structure */
374 memset(txq, 0, sizeof(*txq));
377 const u8 iwl3945_broadcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
379 /*************** STATION TABLE MANAGEMENT ****
380 * mac80211 should be examined to determine if sta_info is duplicating
381 * the functionality provided here
384 /**************************************************************/
385 #if 0 /* temporary disable till we add real remove station */
387 * iwl3945_remove_station - Remove driver's knowledge of station.
389 * NOTE: This does not remove station from device's station table.
391 static u8 iwl3945_remove_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap)
393 int index = IWL_INVALID_STATION;
397 spin_lock_irqsave(&priv->sta_lock, flags);
401 else if (is_broadcast_ether_addr(addr))
402 index = priv->hw_setting.bcast_sta_id;
404 for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++)
405 if (priv->stations[i].used &&
406 !compare_ether_addr(priv->stations[i].sta.sta.addr,
412 if (unlikely(index == IWL_INVALID_STATION))
415 if (priv->stations[index].used) {
416 priv->stations[index].used = 0;
417 priv->num_stations--;
420 BUG_ON(priv->num_stations < 0);
423 spin_unlock_irqrestore(&priv->sta_lock, flags);
429 * iwl3945_clear_stations_table - Clear the driver's station table
431 * NOTE: This does not clear or otherwise alter the device's station table.
433 static void iwl3945_clear_stations_table(struct iwl3945_priv *priv)
437 spin_lock_irqsave(&priv->sta_lock, flags);
439 priv->num_stations = 0;
440 memset(priv->stations, 0, sizeof(priv->stations));
442 spin_unlock_irqrestore(&priv->sta_lock, flags);
446 * iwl3945_add_station - Add station to station tables in driver and device
448 u8 iwl3945_add_station(struct iwl3945_priv *priv, const u8 *addr, int is_ap, u8 flags)
451 int index = IWL_INVALID_STATION;
452 struct iwl3945_station_entry *station;
453 unsigned long flags_spin;
454 DECLARE_MAC_BUF(mac);
457 spin_lock_irqsave(&priv->sta_lock, flags_spin);
460 else if (is_broadcast_ether_addr(addr))
461 index = priv->hw_setting.bcast_sta_id;
463 for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) {
464 if (!compare_ether_addr(priv->stations[i].sta.sta.addr,
470 if (!priv->stations[i].used &&
471 index == IWL_INVALID_STATION)
475 /* These two conditions has the same outcome but keep them separate
476 since they have different meaning */
477 if (unlikely(index == IWL_INVALID_STATION)) {
478 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
482 if (priv->stations[index].used &&
483 !compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) {
484 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
488 IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr));
489 station = &priv->stations[index];
491 priv->num_stations++;
493 /* Set up the REPLY_ADD_STA command to send to device */
494 memset(&station->sta, 0, sizeof(struct iwl3945_addsta_cmd));
495 memcpy(station->sta.sta.addr, addr, ETH_ALEN);
496 station->sta.mode = 0;
497 station->sta.sta.sta_id = index;
498 station->sta.station_flags = 0;
500 if (priv->band == IEEE80211_BAND_5GHZ)
501 rate = IWL_RATE_6M_PLCP;
503 rate = IWL_RATE_1M_PLCP;
505 /* Turn on both antennas for the station... */
506 station->sta.rate_n_flags =
507 iwl3945_hw_set_rate_n_flags(rate, RATE_MCS_ANT_AB_MSK);
508 station->current_rate.rate_n_flags =
509 le16_to_cpu(station->sta.rate_n_flags);
511 spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
513 /* Add station to device's station table */
514 iwl3945_send_add_station(priv, &station->sta, flags);
519 /*************** DRIVER STATUS FUNCTIONS *****/
521 static inline int iwl3945_is_ready(struct iwl3945_priv *priv)
523 /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
524 * set but EXIT_PENDING is not */
525 return test_bit(STATUS_READY, &priv->status) &&
526 test_bit(STATUS_GEO_CONFIGURED, &priv->status) &&
527 !test_bit(STATUS_EXIT_PENDING, &priv->status);
530 static inline int iwl3945_is_alive(struct iwl3945_priv *priv)
532 return test_bit(STATUS_ALIVE, &priv->status);
535 static inline int iwl3945_is_init(struct iwl3945_priv *priv)
537 return test_bit(STATUS_INIT, &priv->status);
540 static inline int iwl3945_is_rfkill(struct iwl3945_priv *priv)
542 return test_bit(STATUS_RF_KILL_HW, &priv->status) ||
543 test_bit(STATUS_RF_KILL_SW, &priv->status);
546 static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv)
549 if (iwl3945_is_rfkill(priv))
552 return iwl3945_is_ready(priv);
555 /*************** HOST COMMAND QUEUE FUNCTIONS *****/
557 #define IWL_CMD(x) case x : return #x
559 static const char *get_cmd_string(u8 cmd)
562 IWL_CMD(REPLY_ALIVE);
563 IWL_CMD(REPLY_ERROR);
565 IWL_CMD(REPLY_RXON_ASSOC);
566 IWL_CMD(REPLY_QOS_PARAM);
567 IWL_CMD(REPLY_RXON_TIMING);
568 IWL_CMD(REPLY_ADD_STA);
569 IWL_CMD(REPLY_REMOVE_STA);
570 IWL_CMD(REPLY_REMOVE_ALL_STA);
571 IWL_CMD(REPLY_3945_RX);
573 IWL_CMD(REPLY_RATE_SCALE);
574 IWL_CMD(REPLY_LEDS_CMD);
575 IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
576 IWL_CMD(RADAR_NOTIFICATION);
577 IWL_CMD(REPLY_QUIET_CMD);
578 IWL_CMD(REPLY_CHANNEL_SWITCH);
579 IWL_CMD(CHANNEL_SWITCH_NOTIFICATION);
580 IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD);
581 IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION);
582 IWL_CMD(POWER_TABLE_CMD);
583 IWL_CMD(PM_SLEEP_NOTIFICATION);
584 IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC);
585 IWL_CMD(REPLY_SCAN_CMD);
586 IWL_CMD(REPLY_SCAN_ABORT_CMD);
587 IWL_CMD(SCAN_START_NOTIFICATION);
588 IWL_CMD(SCAN_RESULTS_NOTIFICATION);
589 IWL_CMD(SCAN_COMPLETE_NOTIFICATION);
590 IWL_CMD(BEACON_NOTIFICATION);
591 IWL_CMD(REPLY_TX_BEACON);
592 IWL_CMD(WHO_IS_AWAKE_NOTIFICATION);
593 IWL_CMD(QUIET_NOTIFICATION);
594 IWL_CMD(REPLY_TX_PWR_TABLE_CMD);
595 IWL_CMD(MEASURE_ABORT_NOTIFICATION);
596 IWL_CMD(REPLY_BT_CONFIG);
597 IWL_CMD(REPLY_STATISTICS_CMD);
598 IWL_CMD(STATISTICS_NOTIFICATION);
599 IWL_CMD(REPLY_CARD_STATE_CMD);
600 IWL_CMD(CARD_STATE_NOTIFICATION);
601 IWL_CMD(MISSED_BEACONS_NOTIFICATION);
608 #define HOST_COMPLETE_TIMEOUT (HZ / 2)
611 * iwl3945_enqueue_hcmd - enqueue a uCode command
612 * @priv: device private data point
613 * @cmd: a point to the ucode command structure
615 * The function returns < 0 values to indicate the operation is
616 * failed. On success, it turns the index (> 0) of command in the
619 static int iwl3945_enqueue_hcmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
621 struct iwl3945_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
622 struct iwl3945_queue *q = &txq->q;
623 struct iwl3945_tfd_frame *tfd;
625 struct iwl3945_cmd *out_cmd;
627 u16 fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
628 dma_addr_t phys_addr;
634 /* If any of the command structures end up being larger than
635 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
636 * we will need to increase the size of the TFD entries */
637 BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
638 !(cmd->meta.flags & CMD_SIZE_HUGE));
641 if (iwl3945_is_rfkill(priv)) {
642 IWL_DEBUG_INFO("Not sending command - RF KILL");
646 if (iwl3945_queue_space(q) < ((cmd->meta.flags & CMD_ASYNC) ? 2 : 1)) {
647 IWL_ERROR("No space for Tx\n");
651 spin_lock_irqsave(&priv->hcmd_lock, flags);
653 tfd = &txq->bd[q->write_ptr];
654 memset(tfd, 0, sizeof(*tfd));
656 control_flags = (u32 *) tfd;
658 idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE);
659 out_cmd = &txq->cmd[idx];
661 out_cmd->hdr.cmd = cmd->id;
662 memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta));
663 memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
665 /* At this point, the out_cmd now has all of the incoming cmd
668 out_cmd->hdr.flags = 0;
669 out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
670 INDEX_TO_SEQ(q->write_ptr));
671 if (out_cmd->meta.flags & CMD_SIZE_HUGE)
672 out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
674 phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx +
675 offsetof(struct iwl3945_cmd, hdr);
676 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size);
678 pad = U32_PAD(cmd->len);
679 count = TFD_CTL_COUNT_GET(*control_flags);
680 *control_flags = TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad);
682 IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, "
683 "%d bytes at %d[%d]:%d\n",
684 get_cmd_string(out_cmd->hdr.cmd),
685 out_cmd->hdr.cmd, le16_to_cpu(out_cmd->hdr.sequence),
686 fix_size, q->write_ptr, idx, IWL_CMD_QUEUE_NUM);
688 txq->need_update = 1;
690 /* Increment and update queue's write index */
691 q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
692 ret = iwl3945_tx_queue_update_write_ptr(priv, txq);
694 spin_unlock_irqrestore(&priv->hcmd_lock, flags);
695 return ret ? ret : idx;
698 static int iwl3945_send_cmd_async(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
702 BUG_ON(!(cmd->meta.flags & CMD_ASYNC));
704 /* An asynchronous command can not expect an SKB to be set. */
705 BUG_ON(cmd->meta.flags & CMD_WANT_SKB);
707 /* An asynchronous command MUST have a callback. */
708 BUG_ON(!cmd->meta.u.callback);
710 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
713 ret = iwl3945_enqueue_hcmd(priv, cmd);
715 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
716 get_cmd_string(cmd->id), ret);
722 static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
727 BUG_ON(cmd->meta.flags & CMD_ASYNC);
729 /* A synchronous command can not have a callback set. */
730 BUG_ON(cmd->meta.u.callback != NULL);
732 if (test_and_set_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)) {
733 IWL_ERROR("Error sending %s: Already sending a host command\n",
734 get_cmd_string(cmd->id));
739 set_bit(STATUS_HCMD_ACTIVE, &priv->status);
741 if (cmd->meta.flags & CMD_WANT_SKB)
742 cmd->meta.source = &cmd->meta;
744 cmd_idx = iwl3945_enqueue_hcmd(priv, cmd);
747 IWL_ERROR("Error sending %s: iwl3945_enqueue_hcmd failed: %d\n",
748 get_cmd_string(cmd->id), ret);
752 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
753 !test_bit(STATUS_HCMD_ACTIVE, &priv->status),
754 HOST_COMPLETE_TIMEOUT);
756 if (test_bit(STATUS_HCMD_ACTIVE, &priv->status)) {
757 IWL_ERROR("Error sending %s: time out after %dms.\n",
758 get_cmd_string(cmd->id),
759 jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
761 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
767 if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
768 IWL_DEBUG_INFO("Command %s aborted: RF KILL Switch\n",
769 get_cmd_string(cmd->id));
773 if (test_bit(STATUS_FW_ERROR, &priv->status)) {
774 IWL_DEBUG_INFO("Command %s failed: FW Error\n",
775 get_cmd_string(cmd->id));
779 if ((cmd->meta.flags & CMD_WANT_SKB) && !cmd->meta.u.skb) {
780 IWL_ERROR("Error: Response NULL in '%s'\n",
781 get_cmd_string(cmd->id));
790 if (cmd->meta.flags & CMD_WANT_SKB) {
791 struct iwl3945_cmd *qcmd;
793 /* Cancel the CMD_WANT_SKB flag for the cmd in the
794 * TX cmd queue. Otherwise in case the cmd comes
795 * in later, it will possibly set an invalid
796 * address (cmd->meta.source). */
797 qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx];
798 qcmd->meta.flags &= ~CMD_WANT_SKB;
801 if (cmd->meta.u.skb) {
802 dev_kfree_skb_any(cmd->meta.u.skb);
803 cmd->meta.u.skb = NULL;
806 clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
810 int iwl3945_send_cmd(struct iwl3945_priv *priv, struct iwl3945_host_cmd *cmd)
812 if (cmd->meta.flags & CMD_ASYNC)
813 return iwl3945_send_cmd_async(priv, cmd);
815 return iwl3945_send_cmd_sync(priv, cmd);
818 int iwl3945_send_cmd_pdu(struct iwl3945_priv *priv, u8 id, u16 len, const void *data)
820 struct iwl3945_host_cmd cmd = {
826 return iwl3945_send_cmd_sync(priv, &cmd);
829 static int __must_check iwl3945_send_cmd_u32(struct iwl3945_priv *priv, u8 id, u32 val)
831 struct iwl3945_host_cmd cmd = {
837 return iwl3945_send_cmd_sync(priv, &cmd);
840 int iwl3945_send_statistics_request(struct iwl3945_priv *priv)
842 return iwl3945_send_cmd_u32(priv, REPLY_STATISTICS_CMD, 0);
846 * iwl3945_set_rxon_channel - Set the phymode and channel values in staging RXON
847 * @band: 2.4 or 5 GHz band
848 * @channel: Any channel valid for the requested band
850 * In addition to setting the staging RXON, priv->band is also set.
852 * NOTE: Does not commit to the hardware; it sets appropriate bit fields
853 * in the staging RXON flag structure based on the band
855 static int iwl3945_set_rxon_channel(struct iwl3945_priv *priv,
856 enum ieee80211_band band,
859 if (!iwl3945_get_channel_info(priv, band, channel)) {
860 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
865 if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
866 (priv->band == band))
869 priv->staging_rxon.channel = cpu_to_le16(channel);
870 if (band == IEEE80211_BAND_5GHZ)
871 priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
873 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
877 IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
883 * iwl3945_check_rxon_cmd - validate RXON structure is valid
885 * NOTE: This is really only useful during development and can eventually
886 * be #ifdef'd out once the driver is stable and folks aren't actively
889 static int iwl3945_check_rxon_cmd(struct iwl3945_rxon_cmd *rxon)
894 if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
895 error |= le32_to_cpu(rxon->flags &
896 (RXON_FLG_TGJ_NARROW_BAND_MSK |
897 RXON_FLG_RADAR_DETECT_MSK));
899 IWL_WARNING("check 24G fields %d | %d\n",
902 error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
903 0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
905 IWL_WARNING("check 52 fields %d | %d\n",
907 error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
909 IWL_WARNING("check 52 CCK %d | %d\n",
912 error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
914 IWL_WARNING("check mac addr %d | %d\n", counter++, error);
916 /* make sure basic rates 6Mbps and 1Mbps are supported */
917 error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
918 ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
920 IWL_WARNING("check basic rate %d | %d\n", counter++, error);
922 error |= (le16_to_cpu(rxon->assoc_id) > 2007);
924 IWL_WARNING("check assoc id %d | %d\n", counter++, error);
926 error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
927 == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
929 IWL_WARNING("check CCK and short slot %d | %d\n",
932 error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
933 == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
935 IWL_WARNING("check CCK & auto detect %d | %d\n",
938 error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
939 RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
941 IWL_WARNING("check TGG and auto detect %d | %d\n",
944 if ((rxon->flags & RXON_FLG_DIS_DIV_MSK))
945 error |= ((rxon->flags & (RXON_FLG_ANT_B_MSK |
946 RXON_FLG_ANT_A_MSK)) == 0);
948 IWL_WARNING("check antenna %d %d\n", counter++, error);
951 IWL_WARNING("Tuning to channel %d\n",
952 le16_to_cpu(rxon->channel));
955 IWL_ERROR("Not a valid iwl3945_rxon_assoc_cmd field values\n");
962 * iwl3945_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
963 * @priv: staging_rxon is compared to active_rxon
965 * If the RXON structure is changing enough to require a new tune,
966 * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
967 * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
969 static int iwl3945_full_rxon_required(struct iwl3945_priv *priv)
972 /* These items are only settable from the full RXON command */
973 if (!(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ||
974 compare_ether_addr(priv->staging_rxon.bssid_addr,
975 priv->active_rxon.bssid_addr) ||
976 compare_ether_addr(priv->staging_rxon.node_addr,
977 priv->active_rxon.node_addr) ||
978 compare_ether_addr(priv->staging_rxon.wlap_bssid_addr,
979 priv->active_rxon.wlap_bssid_addr) ||
980 (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) ||
981 (priv->staging_rxon.channel != priv->active_rxon.channel) ||
982 (priv->staging_rxon.air_propagation !=
983 priv->active_rxon.air_propagation) ||
984 (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
987 /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
988 * be updated with the RXON_ASSOC command -- however only some
989 * flag transitions are allowed using RXON_ASSOC */
991 /* Check if we are not switching bands */
992 if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) !=
993 (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK))
996 /* Check if we are switching association toggle */
997 if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) !=
998 (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK))
1004 static int iwl3945_send_rxon_assoc(struct iwl3945_priv *priv)
1007 struct iwl3945_rx_packet *res = NULL;
1008 struct iwl3945_rxon_assoc_cmd rxon_assoc;
1009 struct iwl3945_host_cmd cmd = {
1010 .id = REPLY_RXON_ASSOC,
1011 .len = sizeof(rxon_assoc),
1012 .meta.flags = CMD_WANT_SKB,
1013 .data = &rxon_assoc,
1015 const struct iwl3945_rxon_cmd *rxon1 = &priv->staging_rxon;
1016 const struct iwl3945_rxon_cmd *rxon2 = &priv->active_rxon;
1018 if ((rxon1->flags == rxon2->flags) &&
1019 (rxon1->filter_flags == rxon2->filter_flags) &&
1020 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1021 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1022 IWL_DEBUG_INFO("Using current RXON_ASSOC. Not resending.\n");
1026 rxon_assoc.flags = priv->staging_rxon.flags;
1027 rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1028 rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1029 rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1030 rxon_assoc.reserved = 0;
1032 rc = iwl3945_send_cmd_sync(priv, &cmd);
1036 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1037 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1038 IWL_ERROR("Bad return from REPLY_RXON_ASSOC command\n");
1042 priv->alloc_rxb_skb--;
1043 dev_kfree_skb_any(cmd.meta.u.skb);
1049 * iwl3945_commit_rxon - commit staging_rxon to hardware
1051 * The RXON command in staging_rxon is committed to the hardware and
1052 * the active_rxon structure is updated with the new data. This
1053 * function correctly transitions out of the RXON_ASSOC_MSK state if
1054 * a HW tune is required based on the RXON structure changes.
1056 static int iwl3945_commit_rxon(struct iwl3945_priv *priv)
1058 /* cast away the const for active_rxon in this function */
1059 struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
1061 DECLARE_MAC_BUF(mac);
1063 if (!iwl3945_is_alive(priv))
1066 /* always get timestamp with Rx frame */
1067 priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
1069 /* select antenna */
1070 priv->staging_rxon.flags &=
1071 ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1072 priv->staging_rxon.flags |= iwl3945_get_antenna_flags(priv);
1074 rc = iwl3945_check_rxon_cmd(&priv->staging_rxon);
1076 IWL_ERROR("Invalid RXON configuration. Not committing.\n");
1080 /* If we don't need to send a full RXON, we can use
1081 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
1082 * and other flags for the current radio configuration. */
1083 if (!iwl3945_full_rxon_required(priv)) {
1084 rc = iwl3945_send_rxon_assoc(priv);
1086 IWL_ERROR("Error setting RXON_ASSOC "
1087 "configuration (%d).\n", rc);
1091 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
1096 /* If we are currently associated and the new config requires
1097 * an RXON_ASSOC and the new config wants the associated mask enabled,
1098 * we must clear the associated from the active configuration
1099 * before we apply the new config */
1100 if (iwl3945_is_associated(priv) &&
1101 (priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) {
1102 IWL_DEBUG_INFO("Toggling associated bit on current RXON\n");
1103 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1105 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON,
1106 sizeof(struct iwl3945_rxon_cmd),
1107 &priv->active_rxon);
1109 /* If the mask clearing failed then we set
1110 * active_rxon back to what it was previously */
1112 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1113 IWL_ERROR("Error clearing ASSOC_MSK on current "
1114 "configuration (%d).\n", rc);
1119 IWL_DEBUG_INFO("Sending RXON\n"
1120 "* with%s RXON_FILTER_ASSOC_MSK\n"
1123 ((priv->staging_rxon.filter_flags &
1124 RXON_FILTER_ASSOC_MSK) ? "" : "out"),
1125 le16_to_cpu(priv->staging_rxon.channel),
1126 print_mac(mac, priv->staging_rxon.bssid_addr));
1128 /* Apply the new configuration */
1129 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON,
1130 sizeof(struct iwl3945_rxon_cmd), &priv->staging_rxon);
1132 IWL_ERROR("Error setting new configuration (%d).\n", rc);
1136 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
1138 iwl3945_clear_stations_table(priv);
1140 /* If we issue a new RXON command which required a tune then we must
1141 * send a new TXPOWER command or we won't be able to Tx any frames */
1142 rc = iwl3945_hw_reg_send_txpower(priv);
1144 IWL_ERROR("Error setting Tx power (%d).\n", rc);
1148 /* Add the broadcast address so we can send broadcast frames */
1149 if (iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0) ==
1150 IWL_INVALID_STATION) {
1151 IWL_ERROR("Error adding BROADCAST address for transmit.\n");
1155 /* If we have set the ASSOC_MSK and we are in BSS mode then
1156 * add the IWL_AP_ID to the station rate table */
1157 if (iwl3945_is_associated(priv) &&
1158 (priv->iw_mode == IEEE80211_IF_TYPE_STA))
1159 if (iwl3945_add_station(priv, priv->active_rxon.bssid_addr, 1, 0)
1160 == IWL_INVALID_STATION) {
1161 IWL_ERROR("Error adding AP address for transmit.\n");
1165 /* Init the hardware's rate fallback order based on the band */
1166 rc = iwl3945_init_hw_rate_table(priv);
1168 IWL_ERROR("Error setting HW rate table: %02X\n", rc);
1175 static int iwl3945_send_bt_config(struct iwl3945_priv *priv)
1177 struct iwl3945_bt_cmd bt_cmd = {
1185 return iwl3945_send_cmd_pdu(priv, REPLY_BT_CONFIG,
1186 sizeof(struct iwl3945_bt_cmd), &bt_cmd);
1189 static int iwl3945_send_scan_abort(struct iwl3945_priv *priv)
1192 struct iwl3945_rx_packet *res;
1193 struct iwl3945_host_cmd cmd = {
1194 .id = REPLY_SCAN_ABORT_CMD,
1195 .meta.flags = CMD_WANT_SKB,
1198 /* If there isn't a scan actively going on in the hardware
1199 * then we are in between scan bands and not actually
1200 * actively scanning, so don't send the abort command */
1201 if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
1202 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1206 rc = iwl3945_send_cmd_sync(priv, &cmd);
1208 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1212 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1213 if (res->u.status != CAN_ABORT_STATUS) {
1214 /* The scan abort will return 1 for success or
1215 * 2 for "failure". A failure condition can be
1216 * due to simply not being in an active scan which
1217 * can occur if we send the scan abort before we
1218 * the microcode has notified us that a scan is
1220 IWL_DEBUG_INFO("SCAN_ABORT returned %d.\n", res->u.status);
1221 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
1222 clear_bit(STATUS_SCAN_HW, &priv->status);
1225 dev_kfree_skb_any(cmd.meta.u.skb);
1230 static int iwl3945_card_state_sync_callback(struct iwl3945_priv *priv,
1231 struct iwl3945_cmd *cmd,
1232 struct sk_buff *skb)
1240 * Use: Sets the device's internal card state to enable, disable, or halt
1242 * When in the 'enable' state the card operates as normal.
1243 * When in the 'disable' state, the card enters into a low power mode.
1244 * When in the 'halt' state, the card is shut down and must be fully
1245 * restarted to come back on.
1247 static int iwl3945_send_card_state(struct iwl3945_priv *priv, u32 flags, u8 meta_flag)
1249 struct iwl3945_host_cmd cmd = {
1250 .id = REPLY_CARD_STATE_CMD,
1253 .meta.flags = meta_flag,
1256 if (meta_flag & CMD_ASYNC)
1257 cmd.meta.u.callback = iwl3945_card_state_sync_callback;
1259 return iwl3945_send_cmd(priv, &cmd);
1262 static int iwl3945_add_sta_sync_callback(struct iwl3945_priv *priv,
1263 struct iwl3945_cmd *cmd, struct sk_buff *skb)
1265 struct iwl3945_rx_packet *res = NULL;
1268 IWL_ERROR("Error: Response NULL in REPLY_ADD_STA.\n");
1272 res = (struct iwl3945_rx_packet *)skb->data;
1273 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1274 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1279 switch (res->u.add_sta.status) {
1280 case ADD_STA_SUCCESS_MSK:
1286 /* We didn't cache the SKB; let the caller free it */
1290 int iwl3945_send_add_station(struct iwl3945_priv *priv,
1291 struct iwl3945_addsta_cmd *sta, u8 flags)
1293 struct iwl3945_rx_packet *res = NULL;
1295 struct iwl3945_host_cmd cmd = {
1296 .id = REPLY_ADD_STA,
1297 .len = sizeof(struct iwl3945_addsta_cmd),
1298 .meta.flags = flags,
1302 if (flags & CMD_ASYNC)
1303 cmd.meta.u.callback = iwl3945_add_sta_sync_callback;
1305 cmd.meta.flags |= CMD_WANT_SKB;
1307 rc = iwl3945_send_cmd(priv, &cmd);
1309 if (rc || (flags & CMD_ASYNC))
1312 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
1313 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
1314 IWL_ERROR("Bad return from REPLY_ADD_STA (0x%08X)\n",
1320 switch (res->u.add_sta.status) {
1321 case ADD_STA_SUCCESS_MSK:
1322 IWL_DEBUG_INFO("REPLY_ADD_STA PASSED\n");
1326 IWL_WARNING("REPLY_ADD_STA failed\n");
1331 priv->alloc_rxb_skb--;
1332 dev_kfree_skb_any(cmd.meta.u.skb);
1337 static int iwl3945_update_sta_key_info(struct iwl3945_priv *priv,
1338 struct ieee80211_key_conf *keyconf,
1341 unsigned long flags;
1342 __le16 key_flags = 0;
1344 switch (keyconf->alg) {
1346 key_flags |= STA_KEY_FLG_CCMP;
1347 key_flags |= cpu_to_le16(
1348 keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
1349 key_flags &= ~STA_KEY_FLG_INVALID;
1356 spin_lock_irqsave(&priv->sta_lock, flags);
1357 priv->stations[sta_id].keyinfo.alg = keyconf->alg;
1358 priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
1359 memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
1362 memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
1364 priv->stations[sta_id].sta.key.key_flags = key_flags;
1365 priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
1366 priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
1368 spin_unlock_irqrestore(&priv->sta_lock, flags);
1370 IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
1371 iwl3945_send_add_station(priv, &priv->stations[sta_id].sta, 0);
1375 static int iwl3945_clear_sta_key_info(struct iwl3945_priv *priv, u8 sta_id)
1377 unsigned long flags;
1379 spin_lock_irqsave(&priv->sta_lock, flags);
1380 memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl3945_hw_key));
1381 memset(&priv->stations[sta_id].sta.key, 0, sizeof(struct iwl3945_keyinfo));
1382 priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
1383 priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
1384 priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
1385 spin_unlock_irqrestore(&priv->sta_lock, flags);
1387 IWL_DEBUG_INFO("hwcrypto: clear ucode station key info\n");
1388 iwl3945_send_add_station(priv, &priv->stations[sta_id].sta, 0);
1392 static void iwl3945_clear_free_frames(struct iwl3945_priv *priv)
1394 struct list_head *element;
1396 IWL_DEBUG_INFO("%d frames on pre-allocated heap on clear.\n",
1397 priv->frames_count);
1399 while (!list_empty(&priv->free_frames)) {
1400 element = priv->free_frames.next;
1402 kfree(list_entry(element, struct iwl3945_frame, list));
1403 priv->frames_count--;
1406 if (priv->frames_count) {
1407 IWL_WARNING("%d frames still in use. Did we lose one?\n",
1408 priv->frames_count);
1409 priv->frames_count = 0;
1413 static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl3945_priv *priv)
1415 struct iwl3945_frame *frame;
1416 struct list_head *element;
1417 if (list_empty(&priv->free_frames)) {
1418 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
1420 IWL_ERROR("Could not allocate frame!\n");
1424 priv->frames_count++;
1428 element = priv->free_frames.next;
1430 return list_entry(element, struct iwl3945_frame, list);
1433 static void iwl3945_free_frame(struct iwl3945_priv *priv, struct iwl3945_frame *frame)
1435 memset(frame, 0, sizeof(*frame));
1436 list_add(&frame->list, &priv->free_frames);
1439 unsigned int iwl3945_fill_beacon_frame(struct iwl3945_priv *priv,
1440 struct ieee80211_hdr *hdr,
1441 const u8 *dest, int left)
1444 if (!iwl3945_is_associated(priv) || !priv->ibss_beacon ||
1445 ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) &&
1446 (priv->iw_mode != IEEE80211_IF_TYPE_AP)))
1449 if (priv->ibss_beacon->len > left)
1452 memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
1454 return priv->ibss_beacon->len;
1457 static u8 iwl3945_rate_get_lowest_plcp(int rate_mask)
1461 for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
1462 i = iwl3945_rates[i].next_ieee) {
1463 if (rate_mask & (1 << i))
1464 return iwl3945_rates[i].plcp;
1467 return IWL_RATE_INVALID;
1470 static int iwl3945_send_beacon_cmd(struct iwl3945_priv *priv)
1472 struct iwl3945_frame *frame;
1473 unsigned int frame_size;
1477 frame = iwl3945_get_free_frame(priv);
1480 IWL_ERROR("Could not obtain free frame buffer for beacon "
1485 if (!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)) {
1486 rate = iwl3945_rate_get_lowest_plcp(priv->active_rate_basic &
1488 if (rate == IWL_INVALID_RATE)
1489 rate = IWL_RATE_6M_PLCP;
1491 rate = iwl3945_rate_get_lowest_plcp(priv->active_rate_basic & 0xF);
1492 if (rate == IWL_INVALID_RATE)
1493 rate = IWL_RATE_1M_PLCP;
1496 frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
1498 rc = iwl3945_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
1501 iwl3945_free_frame(priv, frame);
1506 /******************************************************************************
1508 * EEPROM related functions
1510 ******************************************************************************/
1512 static void get_eeprom_mac(struct iwl3945_priv *priv, u8 *mac)
1514 memcpy(mac, priv->eeprom.mac_address, 6);
1518 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
1519 * embedded controller) as EEPROM reader; each read is a series of pulses
1520 * to/from the EEPROM chip, not a single event, so even reads could conflict
1521 * if they weren't arbitrated by some ownership mechanism. Here, the driver
1522 * simply claims ownership, which should be safe when this function is called
1523 * (i.e. before loading uCode!).
1525 static inline int iwl3945_eeprom_acquire_semaphore(struct iwl3945_priv *priv)
1527 _iwl3945_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
1532 * iwl3945_eeprom_init - read EEPROM contents
1534 * Load the EEPROM contents from adapter into priv->eeprom
1536 * NOTE: This routine uses the non-debug IO access functions.
1538 int iwl3945_eeprom_init(struct iwl3945_priv *priv)
1540 u16 *e = (u16 *)&priv->eeprom;
1541 u32 gp = iwl3945_read32(priv, CSR_EEPROM_GP);
1543 int sz = sizeof(priv->eeprom);
1548 /* The EEPROM structure has several padding buffers within it
1549 * and when adding new EEPROM maps is subject to programmer errors
1550 * which may be very difficult to identify without explicitly
1551 * checking the resulting size of the eeprom map. */
1552 BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
1554 if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
1555 IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
1559 /* Make sure driver (instead of uCode) is allowed to read EEPROM */
1560 rc = iwl3945_eeprom_acquire_semaphore(priv);
1562 IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
1566 /* eeprom is an array of 16bit values */
1567 for (addr = 0; addr < sz; addr += sizeof(u16)) {
1568 _iwl3945_write32(priv, CSR_EEPROM_REG, addr << 1);
1569 _iwl3945_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
1571 for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
1572 i += IWL_EEPROM_ACCESS_DELAY) {
1573 r = _iwl3945_read_direct32(priv, CSR_EEPROM_REG);
1574 if (r & CSR_EEPROM_REG_READ_VALID_MSK)
1576 udelay(IWL_EEPROM_ACCESS_DELAY);
1579 if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
1580 IWL_ERROR("Time out reading EEPROM[%d]", addr);
1583 e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
1589 static void iwl3945_unset_hw_setting(struct iwl3945_priv *priv)
1591 if (priv->hw_setting.shared_virt)
1592 pci_free_consistent(priv->pci_dev,
1593 sizeof(struct iwl3945_shared),
1594 priv->hw_setting.shared_virt,
1595 priv->hw_setting.shared_phys);
1599 * iwl3945_supported_rate_to_ie - fill in the supported rate in IE field
1601 * return : set the bit for each supported rate insert in ie
1603 static u16 iwl3945_supported_rate_to_ie(u8 *ie, u16 supported_rate,
1604 u16 basic_rate, int *left)
1606 u16 ret_rates = 0, bit;
1611 for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
1612 if (bit & supported_rate) {
1614 rates[*cnt] = iwl3945_rates[i].ieee |
1615 ((bit & basic_rate) ? 0x80 : 0x00);
1619 (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
1628 * iwl3945_fill_probe_req - fill in all required fields and IE for probe request
1630 static u16 iwl3945_fill_probe_req(struct iwl3945_priv *priv,
1631 struct ieee80211_mgmt *frame,
1632 int left, int is_direct)
1636 u16 active_rates, ret_rates, cck_rates;
1638 /* Make sure there is enough space for the probe request,
1639 * two mandatory IEs and the data */
1645 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
1646 memcpy(frame->da, iwl3945_broadcast_addr, ETH_ALEN);
1647 memcpy(frame->sa, priv->mac_addr, ETH_ALEN);
1648 memcpy(frame->bssid, iwl3945_broadcast_addr, ETH_ALEN);
1649 frame->seq_ctrl = 0;
1651 /* fill in our indirect SSID IE */
1658 pos = &(frame->u.probe_req.variable[0]);
1659 *pos++ = WLAN_EID_SSID;
1662 /* fill in our direct SSID IE... */
1665 left -= 2 + priv->essid_len;
1668 /* ... fill it in... */
1669 *pos++ = WLAN_EID_SSID;
1670 *pos++ = priv->essid_len;
1671 memcpy(pos, priv->essid, priv->essid_len);
1672 pos += priv->essid_len;
1673 len += 2 + priv->essid_len;
1676 /* fill in supported rate */
1682 /* ... fill it in... */
1683 *pos++ = WLAN_EID_SUPP_RATES;
1686 priv->active_rate = priv->rates_mask;
1687 active_rates = priv->active_rate;
1688 priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
1690 cck_rates = IWL_CCK_RATES_MASK & active_rates;
1691 ret_rates = iwl3945_supported_rate_to_ie(pos, cck_rates,
1692 priv->active_rate_basic, &left);
1693 active_rates &= ~ret_rates;
1695 ret_rates = iwl3945_supported_rate_to_ie(pos, active_rates,
1696 priv->active_rate_basic, &left);
1697 active_rates &= ~ret_rates;
1701 if (active_rates == 0)
1704 /* fill in supported extended rate */
1709 /* ... fill it in... */
1710 *pos++ = WLAN_EID_EXT_SUPP_RATES;
1712 iwl3945_supported_rate_to_ie(pos, active_rates,
1713 priv->active_rate_basic, &left);
1724 static int iwl3945_send_qos_params_command(struct iwl3945_priv *priv,
1725 struct iwl3945_qosparam_cmd *qos)
1728 return iwl3945_send_cmd_pdu(priv, REPLY_QOS_PARAM,
1729 sizeof(struct iwl3945_qosparam_cmd), qos);
1732 static void iwl3945_reset_qos(struct iwl3945_priv *priv)
1738 unsigned long flags;
1741 spin_lock_irqsave(&priv->lock, flags);
1742 priv->qos_data.qos_active = 0;
1744 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) {
1745 if (priv->qos_data.qos_enable)
1746 priv->qos_data.qos_active = 1;
1747 if (!(priv->active_rate & 0xfff0)) {
1751 } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
1752 if (priv->qos_data.qos_enable)
1753 priv->qos_data.qos_active = 1;
1754 } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
1759 if (priv->qos_data.qos_active)
1762 priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
1763 priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
1764 priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
1765 priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
1766 priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
1768 if (priv->qos_data.qos_active) {
1770 priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
1771 priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
1772 priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
1773 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
1774 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1777 priv->qos_data.def_qos_parm.ac[i].cw_min =
1778 cpu_to_le16((cw_min + 1) / 2 - 1);
1779 priv->qos_data.def_qos_parm.ac[i].cw_max =
1780 cpu_to_le16(cw_max);
1781 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
1783 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1786 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1788 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1791 priv->qos_data.def_qos_parm.ac[i].cw_min =
1792 cpu_to_le16((cw_min + 1) / 4 - 1);
1793 priv->qos_data.def_qos_parm.ac[i].cw_max =
1794 cpu_to_le16((cw_max + 1) / 2 - 1);
1795 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
1796 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1798 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1801 priv->qos_data.def_qos_parm.ac[i].edca_txop =
1804 for (i = 1; i < 4; i++) {
1805 priv->qos_data.def_qos_parm.ac[i].cw_min =
1806 cpu_to_le16(cw_min);
1807 priv->qos_data.def_qos_parm.ac[i].cw_max =
1808 cpu_to_le16(cw_max);
1809 priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
1810 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
1811 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
1814 IWL_DEBUG_QOS("set QoS to default \n");
1816 spin_unlock_irqrestore(&priv->lock, flags);
1819 static void iwl3945_activate_qos(struct iwl3945_priv *priv, u8 force)
1821 unsigned long flags;
1823 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1826 if (!priv->qos_data.qos_enable)
1829 spin_lock_irqsave(&priv->lock, flags);
1830 priv->qos_data.def_qos_parm.qos_flags = 0;
1832 if (priv->qos_data.qos_cap.q_AP.queue_request &&
1833 !priv->qos_data.qos_cap.q_AP.txop_request)
1834 priv->qos_data.def_qos_parm.qos_flags |=
1835 QOS_PARAM_FLG_TXOP_TYPE_MSK;
1837 if (priv->qos_data.qos_active)
1838 priv->qos_data.def_qos_parm.qos_flags |=
1839 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
1841 spin_unlock_irqrestore(&priv->lock, flags);
1843 if (force || iwl3945_is_associated(priv)) {
1844 IWL_DEBUG_QOS("send QoS cmd with Qos active %d \n",
1845 priv->qos_data.qos_active);
1847 iwl3945_send_qos_params_command(priv,
1848 &(priv->qos_data.def_qos_parm));
1853 * Power management (not Tx power!) functions
1855 #define MSEC_TO_USEC 1024
1857 #define NOSLP __constant_cpu_to_le32(0)
1858 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK
1859 #define SLP_TIMEOUT(T) __constant_cpu_to_le32((T) * MSEC_TO_USEC)
1860 #define SLP_VEC(X0, X1, X2, X3, X4) {__constant_cpu_to_le32(X0), \
1861 __constant_cpu_to_le32(X1), \
1862 __constant_cpu_to_le32(X2), \
1863 __constant_cpu_to_le32(X3), \
1864 __constant_cpu_to_le32(X4)}
1867 /* default power management (not Tx power) table values */
1869 static struct iwl3945_power_vec_entry range_0[IWL_POWER_AC] = {
1870 {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1871 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
1872 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300), SLP_VEC(2, 4, 6, 7, 7)}, 0},
1873 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100), SLP_VEC(2, 6, 9, 9, 10)}, 0},
1874 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 10)}, 1},
1875 {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25), SLP_VEC(4, 7, 10, 10, 10)}, 1}
1879 static struct iwl3945_power_vec_entry range_1[IWL_POWER_AC] = {
1880 {{NOSLP, SLP_TIMEOUT(0), SLP_TIMEOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0},
1881 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(500),
1882 SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
1883 {{SLP, SLP_TIMEOUT(200), SLP_TIMEOUT(300),
1884 SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
1885 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(100),
1886 SLP_VEC(2, 6, 9, 9, 0xFF)}, 0},
1887 {{SLP, SLP_TIMEOUT(50), SLP_TIMEOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
1888 {{SLP, SLP_TIMEOUT(25), SLP_TIMEOUT(25),
1889 SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
1892 int iwl3945_power_init_handle(struct iwl3945_priv *priv)
1895 struct iwl3945_power_mgr *pow_data;
1896 int size = sizeof(struct iwl3945_power_vec_entry) * IWL_POWER_AC;
1899 IWL_DEBUG_POWER("Initialize power \n");
1901 pow_data = &(priv->power_data);
1903 memset(pow_data, 0, sizeof(*pow_data));
1905 pow_data->active_index = IWL_POWER_RANGE_0;
1906 pow_data->dtim_val = 0xffff;
1908 memcpy(&pow_data->pwr_range_0[0], &range_0[0], size);
1909 memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
1911 rc = pci_read_config_word(priv->pci_dev, PCI_LINK_CTRL, &pci_pm);
1915 struct iwl3945_powertable_cmd *cmd;
1917 IWL_DEBUG_POWER("adjust power command flags\n");
1919 for (i = 0; i < IWL_POWER_AC; i++) {
1920 cmd = &pow_data->pwr_range_0[i].cmd;
1923 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
1925 cmd->flags |= IWL_POWER_PCI_PM_MSK;
1931 static int iwl3945_update_power_cmd(struct iwl3945_priv *priv,
1932 struct iwl3945_powertable_cmd *cmd, u32 mode)
1937 struct iwl3945_power_vec_entry *range;
1939 struct iwl3945_power_mgr *pow_data;
1941 if (mode > IWL_POWER_INDEX_5) {
1942 IWL_DEBUG_POWER("Error invalid power mode \n");
1945 pow_data = &(priv->power_data);
1947 if (pow_data->active_index == IWL_POWER_RANGE_0)
1948 range = &pow_data->pwr_range_0[0];
1950 range = &pow_data->pwr_range_1[1];
1952 memcpy(cmd, &range[mode].cmd, sizeof(struct iwl3945_powertable_cmd));
1954 #ifdef IWL_MAC80211_DISABLE
1955 if (priv->assoc_network != NULL) {
1956 unsigned long flags;
1958 period = priv->assoc_network->tim.tim_period;
1960 #endif /*IWL_MAC80211_DISABLE */
1961 skip = range[mode].no_dtim;
1970 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
1972 __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
1973 max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
1974 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
1977 for (i = 0; i < IWL_POWER_VEC_SIZE; i++) {
1978 if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
1979 cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
1982 IWL_DEBUG_POWER("Flags value = 0x%08X\n", cmd->flags);
1983 IWL_DEBUG_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
1984 IWL_DEBUG_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
1985 IWL_DEBUG_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
1986 le32_to_cpu(cmd->sleep_interval[0]),
1987 le32_to_cpu(cmd->sleep_interval[1]),
1988 le32_to_cpu(cmd->sleep_interval[2]),
1989 le32_to_cpu(cmd->sleep_interval[3]),
1990 le32_to_cpu(cmd->sleep_interval[4]));
1995 static int iwl3945_send_power_mode(struct iwl3945_priv *priv, u32 mode)
1997 u32 uninitialized_var(final_mode);
1999 struct iwl3945_powertable_cmd cmd;
2001 /* If on battery, set to 3,
2002 * if plugged into AC power, set to CAM ("continuously aware mode"),
2003 * else user level */
2005 case IWL_POWER_BATTERY:
2006 final_mode = IWL_POWER_INDEX_3;
2009 final_mode = IWL_POWER_MODE_CAM;
2016 iwl3945_update_power_cmd(priv, &cmd, final_mode);
2018 rc = iwl3945_send_cmd_pdu(priv, POWER_TABLE_CMD, sizeof(cmd), &cmd);
2020 if (final_mode == IWL_POWER_MODE_CAM)
2021 clear_bit(STATUS_POWER_PMI, &priv->status);
2023 set_bit(STATUS_POWER_PMI, &priv->status);
2028 int iwl3945_is_network_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
2030 /* Filter incoming packets to determine if they are targeted toward
2031 * this network, discarding packets coming from ourselves */
2032 switch (priv->iw_mode) {
2033 case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
2034 /* packets from our adapter are dropped (echo) */
2035 if (!compare_ether_addr(header->addr2, priv->mac_addr))
2037 /* {broad,multi}cast packets to our IBSS go through */
2038 if (is_multicast_ether_addr(header->addr1))
2039 return !compare_ether_addr(header->addr3, priv->bssid);
2040 /* packets to our adapter go through */
2041 return !compare_ether_addr(header->addr1, priv->mac_addr);
2042 case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
2043 /* packets from our adapter are dropped (echo) */
2044 if (!compare_ether_addr(header->addr3, priv->mac_addr))
2046 /* {broad,multi}cast packets to our BSS go through */
2047 if (is_multicast_ether_addr(header->addr1))
2048 return !compare_ether_addr(header->addr2, priv->bssid);
2049 /* packets to our adapter go through */
2050 return !compare_ether_addr(header->addr1, priv->mac_addr);
2059 * iwl3945_scan_cancel - Cancel any currently executing HW scan
2061 * NOTE: priv->mutex is not required before calling this function
2063 static int iwl3945_scan_cancel(struct iwl3945_priv *priv)
2065 if (!test_bit(STATUS_SCAN_HW, &priv->status)) {
2066 clear_bit(STATUS_SCANNING, &priv->status);
2070 if (test_bit(STATUS_SCANNING, &priv->status)) {
2071 if (!test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
2072 IWL_DEBUG_SCAN("Queuing scan abort.\n");
2073 set_bit(STATUS_SCAN_ABORTING, &priv->status);
2074 queue_work(priv->workqueue, &priv->abort_scan);
2077 IWL_DEBUG_SCAN("Scan abort already in progress.\n");
2079 return test_bit(STATUS_SCANNING, &priv->status);
2086 * iwl3945_scan_cancel_timeout - Cancel any currently executing HW scan
2087 * @ms: amount of time to wait (in milliseconds) for scan to abort
2089 * NOTE: priv->mutex must be held before calling this function
2091 static int iwl3945_scan_cancel_timeout(struct iwl3945_priv *priv, unsigned long ms)
2093 unsigned long now = jiffies;
2096 ret = iwl3945_scan_cancel(priv);
2098 mutex_unlock(&priv->mutex);
2099 while (!time_after(jiffies, now + msecs_to_jiffies(ms)) &&
2100 test_bit(STATUS_SCANNING, &priv->status))
2102 mutex_lock(&priv->mutex);
2104 return test_bit(STATUS_SCANNING, &priv->status);
2110 static void iwl3945_sequence_reset(struct iwl3945_priv *priv)
2112 /* Reset ieee stats */
2114 /* We don't reset the net_device_stats (ieee->stats) on
2117 priv->last_seq_num = -1;
2118 priv->last_frag_num = -1;
2119 priv->last_packet_time = 0;
2121 iwl3945_scan_cancel(priv);
2124 #define MAX_UCODE_BEACON_INTERVAL 1024
2125 #define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA)
2127 static __le16 iwl3945_adjust_beacon_interval(u16 beacon_val)
2130 u16 beacon_factor = 0;
2133 (beacon_val + MAX_UCODE_BEACON_INTERVAL)
2134 / MAX_UCODE_BEACON_INTERVAL;
2135 new_val = beacon_val / beacon_factor;
2137 return cpu_to_le16(new_val);
2140 static void iwl3945_setup_rxon_timing(struct iwl3945_priv *priv)
2142 u64 interval_tm_unit;
2144 unsigned long flags;
2145 struct ieee80211_conf *conf = NULL;
2148 conf = ieee80211_get_hw_conf(priv->hw);
2150 spin_lock_irqsave(&priv->lock, flags);
2151 priv->rxon_timing.timestamp.dw[1] = cpu_to_le32(priv->timestamp1);
2152 priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp0);
2154 priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL;
2156 tsf = priv->timestamp1;
2157 tsf = ((tsf << 32) | priv->timestamp0);
2159 beacon_int = priv->beacon_int;
2160 spin_unlock_irqrestore(&priv->lock, flags);
2162 if (priv->iw_mode == IEEE80211_IF_TYPE_STA) {
2163 if (beacon_int == 0) {
2164 priv->rxon_timing.beacon_interval = cpu_to_le16(100);
2165 priv->rxon_timing.beacon_init_val = cpu_to_le32(102400);
2167 priv->rxon_timing.beacon_interval =
2168 cpu_to_le16(beacon_int);
2169 priv->rxon_timing.beacon_interval =
2170 iwl3945_adjust_beacon_interval(
2171 le16_to_cpu(priv->rxon_timing.beacon_interval));
2174 priv->rxon_timing.atim_window = 0;
2176 priv->rxon_timing.beacon_interval =
2177 iwl3945_adjust_beacon_interval(conf->beacon_int);
2178 /* TODO: we need to get atim_window from upper stack
2179 * for now we set to 0 */
2180 priv->rxon_timing.atim_window = 0;
2184 (le16_to_cpu(priv->rxon_timing.beacon_interval) * 1024);
2185 result = do_div(tsf, interval_tm_unit);
2186 priv->rxon_timing.beacon_init_val =
2187 cpu_to_le32((u32) ((u64) interval_tm_unit - result));
2190 ("beacon interval %d beacon timer %d beacon tim %d\n",
2191 le16_to_cpu(priv->rxon_timing.beacon_interval),
2192 le32_to_cpu(priv->rxon_timing.beacon_init_val),
2193 le16_to_cpu(priv->rxon_timing.atim_window));
2196 static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
2198 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
2199 IWL_ERROR("APs don't scan.\n");
2203 if (!iwl3945_is_ready_rf(priv)) {
2204 IWL_DEBUG_SCAN("Aborting scan due to not ready.\n");
2208 if (test_bit(STATUS_SCANNING, &priv->status)) {
2209 IWL_DEBUG_SCAN("Scan already in progress.\n");
2213 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
2214 IWL_DEBUG_SCAN("Scan request while abort pending. "
2219 IWL_DEBUG_INFO("Starting scan...\n");
2220 if (priv->cfg->sku & IWL_SKU_G)
2221 priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
2222 if (priv->cfg->sku & IWL_SKU_A)
2223 priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
2224 set_bit(STATUS_SCANNING, &priv->status);
2225 priv->scan_start = jiffies;
2226 priv->scan_pass_start = priv->scan_start;
2228 queue_work(priv->workqueue, &priv->request_scan);
2233 static int iwl3945_set_rxon_hwcrypto(struct iwl3945_priv *priv, int hw_decrypt)
2235 struct iwl3945_rxon_cmd *rxon = &priv->staging_rxon;
2238 rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
2240 rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
2245 static void iwl3945_set_flags_for_phymode(struct iwl3945_priv *priv,
2246 enum ieee80211_band band)
2248 if (band == IEEE80211_BAND_5GHZ) {
2249 priv->staging_rxon.flags &=
2250 ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
2251 | RXON_FLG_CCK_MSK);
2252 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2254 /* Copied from iwl3945_bg_post_associate() */
2255 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2256 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2258 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2260 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
2261 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2263 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
2264 priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK;
2265 priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK;
2270 * initialize rxon structure with default values from eeprom
2272 static void iwl3945_connection_init_rx_config(struct iwl3945_priv *priv)
2274 const struct iwl3945_channel_info *ch_info;
2276 memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon));
2278 switch (priv->iw_mode) {
2279 case IEEE80211_IF_TYPE_AP:
2280 priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP;
2283 case IEEE80211_IF_TYPE_STA:
2284 priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS;
2285 priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
2288 case IEEE80211_IF_TYPE_IBSS:
2289 priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS;
2290 priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
2291 priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
2292 RXON_FILTER_ACCEPT_GRP_MSK;
2295 case IEEE80211_IF_TYPE_MNTR:
2296 priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
2297 priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
2298 RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
2301 IWL_ERROR("Unsupported interface type %d\n", priv->iw_mode);
2306 /* TODO: Figure out when short_preamble would be set and cache from
2308 if (!hw_to_local(priv->hw)->short_preamble)
2309 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2311 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2314 ch_info = iwl3945_get_channel_info(priv, priv->band,
2315 le16_to_cpu(priv->staging_rxon.channel));
2318 ch_info = &priv->channel_info[0];
2321 * in some case A channels are all non IBSS
2322 * in this case force B/G channel
2324 if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
2325 !(is_channel_ibss(ch_info)))
2326 ch_info = &priv->channel_info[0];
2328 priv->staging_rxon.channel = cpu_to_le16(ch_info->channel);
2329 if (is_channel_a_band(ch_info))
2330 priv->band = IEEE80211_BAND_5GHZ;
2332 priv->band = IEEE80211_BAND_2GHZ;
2334 iwl3945_set_flags_for_phymode(priv, priv->band);
2336 priv->staging_rxon.ofdm_basic_rates =
2337 (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2338 priv->staging_rxon.cck_basic_rates =
2339 (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
2342 static int iwl3945_set_mode(struct iwl3945_priv *priv, int mode)
2344 if (mode == IEEE80211_IF_TYPE_IBSS) {
2345 const struct iwl3945_channel_info *ch_info;
2347 ch_info = iwl3945_get_channel_info(priv,
2349 le16_to_cpu(priv->staging_rxon.channel));
2351 if (!ch_info || !is_channel_ibss(ch_info)) {
2352 IWL_ERROR("channel %d not IBSS channel\n",
2353 le16_to_cpu(priv->staging_rxon.channel));
2358 priv->iw_mode = mode;
2360 iwl3945_connection_init_rx_config(priv);
2361 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2363 iwl3945_clear_stations_table(priv);
2365 /* dont commit rxon if rf-kill is on*/
2366 if (!iwl3945_is_ready_rf(priv))
2369 cancel_delayed_work(&priv->scan_check);
2370 if (iwl3945_scan_cancel_timeout(priv, 100)) {
2371 IWL_WARNING("Aborted scan still in progress after 100ms\n");
2372 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
2376 iwl3945_commit_rxon(priv);
2381 static void iwl3945_build_tx_cmd_hwcrypto(struct iwl3945_priv *priv,
2382 struct ieee80211_tx_info *info,
2383 struct iwl3945_cmd *cmd,
2384 struct sk_buff *skb_frag,
2387 struct iwl3945_hw_key *keyinfo =
2388 &priv->stations[info->control.hw_key->hw_key_idx].keyinfo;
2390 switch (keyinfo->alg) {
2392 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_CCM;
2393 memcpy(cmd->cmd.tx.key, keyinfo->key, keyinfo->keylen);
2394 IWL_DEBUG_TX("tx_cmd with aes hwcrypto\n");
2399 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_TKIP;
2402 memcpy(cmd->cmd.tx.tkip_mic.byte, skb_frag->tail - 8,
2405 memset(cmd->cmd.tx.tkip_mic.byte, 0, 8);
2410 cmd->cmd.tx.sec_ctl = TX_CMD_SEC_WEP |
2411 (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
2413 if (keyinfo->keylen == 13)
2414 cmd->cmd.tx.sec_ctl |= TX_CMD_SEC_KEY128;
2416 memcpy(&cmd->cmd.tx.key[3], keyinfo->key, keyinfo->keylen);
2418 IWL_DEBUG_TX("Configuring packet for WEP encryption "
2419 "with key %d\n", info->control.hw_key->hw_key_idx);
2423 printk(KERN_ERR "Unknown encode alg %d\n", keyinfo->alg);
2429 * handle build REPLY_TX command notification.
2431 static void iwl3945_build_tx_cmd_basic(struct iwl3945_priv *priv,
2432 struct iwl3945_cmd *cmd,
2433 struct ieee80211_tx_info *info,
2434 struct ieee80211_hdr *hdr,
2435 int is_unicast, u8 std_id)
2437 __le16 fc = hdr->frame_control;
2438 __le32 tx_flags = cmd->cmd.tx.tx_flags;
2440 cmd->cmd.tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2441 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
2442 tx_flags |= TX_CMD_FLG_ACK_MSK;
2443 if (ieee80211_is_mgmt(fc))
2444 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2445 if (ieee80211_is_probe_resp(fc) &&
2446 !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
2447 tx_flags |= TX_CMD_FLG_TSF_MSK;
2449 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
2450 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2453 cmd->cmd.tx.sta_id = std_id;
2454 if (ieee80211_has_morefrags(fc))
2455 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
2457 if (ieee80211_is_data_qos(fc)) {
2458 u8 *qc = ieee80211_get_qos_ctl(hdr);
2459 cmd->cmd.tx.tid_tspec = qc[0] & 0xf;
2460 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
2462 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
2465 if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
2466 tx_flags |= TX_CMD_FLG_RTS_MSK;
2467 tx_flags &= ~TX_CMD_FLG_CTS_MSK;
2468 } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
2469 tx_flags &= ~TX_CMD_FLG_RTS_MSK;
2470 tx_flags |= TX_CMD_FLG_CTS_MSK;
2473 if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
2474 tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
2476 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
2477 if (ieee80211_is_mgmt(fc)) {
2478 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
2479 cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(3);
2481 cmd->cmd.tx.timeout.pm_frame_timeout = cpu_to_le16(2);
2483 cmd->cmd.tx.timeout.pm_frame_timeout = 0;
2484 #ifdef CONFIG_IWL3945_LEDS
2485 priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
2489 cmd->cmd.tx.driver_txop = 0;
2490 cmd->cmd.tx.tx_flags = tx_flags;
2491 cmd->cmd.tx.next_frame_len = 0;
2495 * iwl3945_get_sta_id - Find station's index within station table
2497 static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *hdr)
2500 u16 fc = le16_to_cpu(hdr->frame_control);
2502 /* If this frame is broadcast or management, use broadcast station id */
2503 if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) ||
2504 is_multicast_ether_addr(hdr->addr1))
2505 return priv->hw_setting.bcast_sta_id;
2507 switch (priv->iw_mode) {
2509 /* If we are a client station in a BSS network, use the special
2510 * AP station entry (that's the only station we communicate with) */
2511 case IEEE80211_IF_TYPE_STA:
2514 /* If we are an AP, then find the station, or use BCAST */
2515 case IEEE80211_IF_TYPE_AP:
2516 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
2517 if (sta_id != IWL_INVALID_STATION)
2519 return priv->hw_setting.bcast_sta_id;
2521 /* If this frame is going out to an IBSS network, find the station,
2522 * or create a new station table entry */
2523 case IEEE80211_IF_TYPE_IBSS: {
2524 DECLARE_MAC_BUF(mac);
2526 /* Create new station table entry */
2527 sta_id = iwl3945_hw_find_station(priv, hdr->addr1);
2528 if (sta_id != IWL_INVALID_STATION)
2531 sta_id = iwl3945_add_station(priv, hdr->addr1, 0, CMD_ASYNC);
2533 if (sta_id != IWL_INVALID_STATION)
2536 IWL_DEBUG_DROP("Station %s not in station map. "
2537 "Defaulting to broadcast...\n",
2538 print_mac(mac, hdr->addr1));
2539 iwl3945_print_hex_dump(IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
2540 return priv->hw_setting.bcast_sta_id;
2543 IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
2544 return priv->hw_setting.bcast_sta_id;
2549 * start REPLY_TX command process
2551 static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb)
2553 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
2554 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2555 struct iwl3945_tfd_frame *tfd;
2557 int txq_id = skb_get_queue_mapping(skb);
2558 struct iwl3945_tx_queue *txq = NULL;
2559 struct iwl3945_queue *q = NULL;
2560 dma_addr_t phys_addr;
2561 dma_addr_t txcmd_phys;
2562 struct iwl3945_cmd *out_cmd = NULL;
2563 u16 len, idx, len_org, hdr_len;
2570 u8 wait_write_ptr = 0;
2572 unsigned long flags;
2575 spin_lock_irqsave(&priv->lock, flags);
2576 if (iwl3945_is_rfkill(priv)) {
2577 IWL_DEBUG_DROP("Dropping - RF KILL\n");
2582 IWL_DEBUG_DROP("Dropping - !priv->vif\n");
2586 if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
2587 IWL_ERROR("ERROR: No TX rate available.\n");
2591 unicast = !is_multicast_ether_addr(hdr->addr1);
2594 fc = hdr->frame_control;
2596 #ifdef CONFIG_IWL3945_DEBUG
2597 if (ieee80211_is_auth(fc))
2598 IWL_DEBUG_TX("Sending AUTH frame\n");
2599 else if (ieee80211_is_assoc_req(fc))
2600 IWL_DEBUG_TX("Sending ASSOC frame\n");
2601 else if (ieee80211_is_reassoc_req(fc))
2602 IWL_DEBUG_TX("Sending REASSOC frame\n");
2605 /* drop all data frame if we are not associated */
2606 if ((!iwl3945_is_associated(priv) ||
2607 ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id)) &&
2608 ieee80211_is_data(fc)) {
2609 IWL_DEBUG_DROP("Dropping - !iwl3945_is_associated\n");
2613 spin_unlock_irqrestore(&priv->lock, flags);
2615 hdr_len = ieee80211_get_hdrlen(le16_to_cpu(fc));
2617 /* Find (or create) index into station table for destination station */
2618 sta_id = iwl3945_get_sta_id(priv, hdr);
2619 if (sta_id == IWL_INVALID_STATION) {
2620 DECLARE_MAC_BUF(mac);
2622 IWL_DEBUG_DROP("Dropping - INVALID STATION: %s\n",
2623 print_mac(mac, hdr->addr1));
2627 IWL_DEBUG_RATE("station Id %d\n", sta_id);
2629 if (ieee80211_is_data_qos(fc)) {
2630 qc = ieee80211_get_qos_ctl(hdr);
2632 seq_number = priv->stations[sta_id].tid[tid].seq_number &
2634 hdr->seq_ctrl = cpu_to_le16(seq_number) |
2636 __constant_cpu_to_le16(IEEE80211_SCTL_FRAG));
2640 /* Descriptor for chosen Tx queue */
2641 txq = &priv->txq[txq_id];
2644 spin_lock_irqsave(&priv->lock, flags);
2646 /* Set up first empty TFD within this queue's circular TFD buffer */
2647 tfd = &txq->bd[q->write_ptr];
2648 memset(tfd, 0, sizeof(*tfd));
2649 control_flags = (u32 *) tfd;
2650 idx = get_cmd_index(q, q->write_ptr, 0);
2652 /* Set up driver data for this TFD */
2653 memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl3945_tx_info));
2654 txq->txb[q->write_ptr].skb[0] = skb;
2656 /* Init first empty entry in queue's array of Tx/cmd buffers */
2657 out_cmd = &txq->cmd[idx];
2658 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
2659 memset(&out_cmd->cmd.tx, 0, sizeof(out_cmd->cmd.tx));
2662 * Set up the Tx-command (not MAC!) header.
2663 * Store the chosen Tx queue and TFD index within the sequence field;
2664 * after Tx, uCode's Tx response will return this value so driver can
2665 * locate the frame within the tx queue and do post-tx processing.
2667 out_cmd->hdr.cmd = REPLY_TX;
2668 out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
2669 INDEX_TO_SEQ(q->write_ptr)));
2671 /* Copy MAC header from skb into command buffer */
2672 memcpy(out_cmd->cmd.tx.hdr, hdr, hdr_len);
2675 * Use the first empty entry in this queue's command buffer array
2676 * to contain the Tx command and MAC header concatenated together
2677 * (payload data will be in another buffer).
2678 * Size of this varies, due to varying MAC header length.
2679 * If end is not dword aligned, we'll have 2 extra bytes at the end
2680 * of the MAC header (device reads on dword boundaries).
2681 * We'll tell device about this padding later.
2683 len = priv->hw_setting.tx_cmd_len +
2684 sizeof(struct iwl3945_cmd_header) + hdr_len;
2687 len = (len + 3) & ~3;
2694 /* Physical address of this Tx command's header (not MAC header!),
2695 * within command buffer array. */
2696 txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl3945_cmd) * idx +
2697 offsetof(struct iwl3945_cmd, hdr);
2699 /* Add buffer containing Tx command and MAC(!) header to TFD's
2701 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);
2703 if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT))
2704 iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0);
2706 /* Set up TFD's 2nd entry to point directly to remainder of skb,
2707 * if any (802.11 null frames have no payload). */
2708 len = skb->len - hdr_len;
2710 phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
2711 len, PCI_DMA_TODEVICE);
2712 iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, len);
2716 /* If there is no payload, then we use only one Tx buffer */
2717 *control_flags = TFD_CTL_COUNT_SET(1);
2719 /* Else use 2 buffers.
2720 * Tell 3945 about any padding after MAC header */
2721 *control_flags = TFD_CTL_COUNT_SET(2) |
2722 TFD_CTL_PAD_SET(U32_PAD(len));
2724 /* Total # bytes to be transmitted */
2725 len = (u16)skb->len;
2726 out_cmd->cmd.tx.len = cpu_to_le16(len);
2728 /* TODO need this for burst mode later on */
2729 iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, unicast, sta_id);
2731 /* set is_hcca to 0; it probably will never be implemented */
2732 iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
2734 out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
2735 out_cmd->cmd.tx.tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
2737 if (!ieee80211_has_morefrags(hdr->frame_control)) {
2738 txq->need_update = 1;
2740 priv->stations[sta_id].tid[tid].seq_number = seq_number;
2744 txq->need_update = 0;
2747 iwl3945_print_hex_dump(IWL_DL_TX, out_cmd->cmd.payload,
2748 sizeof(out_cmd->cmd.tx));
2750 iwl3945_print_hex_dump(IWL_DL_TX, (u8 *)out_cmd->cmd.tx.hdr,
2751 ieee80211_get_hdrlen(le16_to_cpu(fc)));
2753 /* Tell device the write index *just past* this latest filled TFD */
2754 q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
2755 rc = iwl3945_tx_queue_update_write_ptr(priv, txq);
2756 spin_unlock_irqrestore(&priv->lock, flags);
2761 if ((iwl3945_queue_space(q) < q->high_mark)
2762 && priv->mac80211_registered) {
2763 if (wait_write_ptr) {
2764 spin_lock_irqsave(&priv->lock, flags);
2765 txq->need_update = 1;
2766 iwl3945_tx_queue_update_write_ptr(priv, txq);
2767 spin_unlock_irqrestore(&priv->lock, flags);
2770 ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb));
2776 spin_unlock_irqrestore(&priv->lock, flags);
2781 static void iwl3945_set_rate(struct iwl3945_priv *priv)
2783 const struct ieee80211_supported_band *sband = NULL;
2784 struct ieee80211_rate *rate;
2787 sband = iwl3945_get_band(priv, priv->band);
2789 IWL_ERROR("Failed to set rate: unable to get hw mode\n");
2793 priv->active_rate = 0;
2794 priv->active_rate_basic = 0;
2796 IWL_DEBUG_RATE("Setting rates for %s GHz\n",
2797 sband->band == IEEE80211_BAND_2GHZ ? "2.4" : "5");
2799 for (i = 0; i < sband->n_bitrates; i++) {
2800 rate = &sband->bitrates[i];
2801 if ((rate->hw_value < IWL_RATE_COUNT) &&
2802 !(rate->flags & IEEE80211_CHAN_DISABLED)) {
2803 IWL_DEBUG_RATE("Adding rate index %d (plcp %d)\n",
2804 rate->hw_value, iwl3945_rates[rate->hw_value].plcp);
2805 priv->active_rate |= (1 << rate->hw_value);
2809 IWL_DEBUG_RATE("Set active_rate = %0x, active_rate_basic = %0x\n",
2810 priv->active_rate, priv->active_rate_basic);
2813 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK)
2814 * otherwise set it to the default of all CCK rates and 6, 12, 24 for
2817 if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK)
2818 priv->staging_rxon.cck_basic_rates =
2819 ((priv->active_rate_basic &
2820 IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF;
2822 priv->staging_rxon.cck_basic_rates =
2823 (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
2825 if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK)
2826 priv->staging_rxon.ofdm_basic_rates =
2827 ((priv->active_rate_basic &
2828 (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >>
2829 IWL_FIRST_OFDM_RATE) & 0xFF;
2831 priv->staging_rxon.ofdm_basic_rates =
2832 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2835 static void iwl3945_radio_kill_sw(struct iwl3945_priv *priv, int disable_radio)
2837 unsigned long flags;
2839 if (!!disable_radio == test_bit(STATUS_RF_KILL_SW, &priv->status))
2842 IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO %s\n",
2843 disable_radio ? "OFF" : "ON");
2845 if (disable_radio) {
2846 iwl3945_scan_cancel(priv);
2847 /* FIXME: This is a workaround for AP */
2848 if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
2849 spin_lock_irqsave(&priv->lock, flags);
2850 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET,
2851 CSR_UCODE_SW_BIT_RFKILL);
2852 spin_unlock_irqrestore(&priv->lock, flags);
2853 iwl3945_send_card_state(priv, CARD_STATE_CMD_DISABLE, 0);
2854 set_bit(STATUS_RF_KILL_SW, &priv->status);
2859 spin_lock_irqsave(&priv->lock, flags);
2860 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2862 clear_bit(STATUS_RF_KILL_SW, &priv->status);
2863 spin_unlock_irqrestore(&priv->lock, flags);
2868 spin_lock_irqsave(&priv->lock, flags);
2869 iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
2870 if (!iwl3945_grab_nic_access(priv))
2871 iwl3945_release_nic_access(priv);
2872 spin_unlock_irqrestore(&priv->lock, flags);
2874 if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
2875 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
2876 "disabled by HW switch\n");
2881 queue_work(priv->workqueue, &priv->restart);
2885 void iwl3945_set_decrypted_flag(struct iwl3945_priv *priv, struct sk_buff *skb,
2886 u32 decrypt_res, struct ieee80211_rx_status *stats)
2889 le16_to_cpu(((struct ieee80211_hdr *)skb->data)->frame_control);
2891 if (priv->active_rxon.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
2894 if (!(fc & IEEE80211_FCTL_PROTECTED))
2897 IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
2898 switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
2899 case RX_RES_STATUS_SEC_TYPE_TKIP:
2900 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
2901 RX_RES_STATUS_BAD_ICV_MIC)
2902 stats->flag |= RX_FLAG_MMIC_ERROR;
2903 case RX_RES_STATUS_SEC_TYPE_WEP:
2904 case RX_RES_STATUS_SEC_TYPE_CCMP:
2905 if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
2906 RX_RES_STATUS_DECRYPT_OK) {
2907 IWL_DEBUG_RX("hw decrypt successfully!!!\n");
2908 stats->flag |= RX_FLAG_DECRYPTED;
2917 #define IWL_PACKET_RETRY_TIME HZ
2919 int iwl3945_is_duplicate_packet(struct iwl3945_priv *priv, struct ieee80211_hdr *header)
2921 u16 sc = le16_to_cpu(header->seq_ctrl);
2922 u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
2923 u16 frag = sc & IEEE80211_SCTL_FRAG;
2924 u16 *last_seq, *last_frag;
2925 unsigned long *last_time;
2927 switch (priv->iw_mode) {
2928 case IEEE80211_IF_TYPE_IBSS:{
2929 struct list_head *p;
2930 struct iwl3945_ibss_seq *entry = NULL;
2931 u8 *mac = header->addr2;
2932 int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
2934 __list_for_each(p, &priv->ibss_mac_hash[index]) {
2935 entry = list_entry(p, struct iwl3945_ibss_seq, list);
2936 if (!compare_ether_addr(entry->mac, mac))
2939 if (p == &priv->ibss_mac_hash[index]) {
2940 entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
2942 IWL_ERROR("Cannot malloc new mac entry\n");
2945 memcpy(entry->mac, mac, ETH_ALEN);
2946 entry->seq_num = seq;
2947 entry->frag_num = frag;
2948 entry->packet_time = jiffies;
2949 list_add(&entry->list, &priv->ibss_mac_hash[index]);
2952 last_seq = &entry->seq_num;
2953 last_frag = &entry->frag_num;
2954 last_time = &entry->packet_time;
2957 case IEEE80211_IF_TYPE_STA:
2958 last_seq = &priv->last_seq_num;
2959 last_frag = &priv->last_frag_num;
2960 last_time = &priv->last_packet_time;
2965 if ((*last_seq == seq) &&
2966 time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
2967 if (*last_frag == frag)
2969 if (*last_frag + 1 != frag)
2970 /* out-of-order fragment */
2976 *last_time = jiffies;
2983 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
2985 #include "iwl-spectrum.h"
2987 #define BEACON_TIME_MASK_LOW 0x00FFFFFF
2988 #define BEACON_TIME_MASK_HIGH 0xFF000000
2989 #define TIME_UNIT 1024
2992 * extended beacon time format
2993 * time in usec will be changed into a 32-bit value in 8:24 format
2994 * the high 1 byte is the beacon counts
2995 * the lower 3 bytes is the time in usec within one beacon interval
2998 static u32 iwl3945_usecs_to_beacons(u32 usec, u32 beacon_interval)
3002 u32 interval = beacon_interval * 1024;
3004 if (!interval || !usec)
3007 quot = (usec / interval) & (BEACON_TIME_MASK_HIGH >> 24);
3008 rem = (usec % interval) & BEACON_TIME_MASK_LOW;
3010 return (quot << 24) + rem;
3013 /* base is usually what we get from ucode with each received frame,
3014 * the same as HW timer counter counting down
3017 static __le32 iwl3945_add_beacon_time(u32 base, u32 addon, u32 beacon_interval)
3019 u32 base_low = base & BEACON_TIME_MASK_LOW;
3020 u32 addon_low = addon & BEACON_TIME_MASK_LOW;
3021 u32 interval = beacon_interval * TIME_UNIT;
3022 u32 res = (base & BEACON_TIME_MASK_HIGH) +
3023 (addon & BEACON_TIME_MASK_HIGH);
3025 if (base_low > addon_low)
3026 res += base_low - addon_low;
3027 else if (base_low < addon_low) {
3028 res += interval + base_low - addon_low;
3033 return cpu_to_le32(res);
3036 static int iwl3945_get_measurement(struct iwl3945_priv *priv,
3037 struct ieee80211_measurement_params *params,
3040 struct iwl3945_spectrum_cmd spectrum;
3041 struct iwl3945_rx_packet *res;
3042 struct iwl3945_host_cmd cmd = {
3043 .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
3044 .data = (void *)&spectrum,
3045 .meta.flags = CMD_WANT_SKB,
3047 u32 add_time = le64_to_cpu(params->start_time);
3049 int spectrum_resp_status;
3050 int duration = le16_to_cpu(params->duration);
3052 if (iwl3945_is_associated(priv))
3054 iwl3945_usecs_to_beacons(
3055 le64_to_cpu(params->start_time) - priv->last_tsf,
3056 le16_to_cpu(priv->rxon_timing.beacon_interval));
3058 memset(&spectrum, 0, sizeof(spectrum));
3060 spectrum.channel_count = cpu_to_le16(1);
3062 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
3063 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
3064 cmd.len = sizeof(spectrum);
3065 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
3067 if (iwl3945_is_associated(priv))
3068 spectrum.start_time =
3069 iwl3945_add_beacon_time(priv->last_beacon_time,
3071 le16_to_cpu(priv->rxon_timing.beacon_interval));
3073 spectrum.start_time = 0;
3075 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
3076 spectrum.channels[0].channel = params->channel;
3077 spectrum.channels[0].type = type;
3078 if (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)
3079 spectrum.flags |= RXON_FLG_BAND_24G_MSK |
3080 RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
3082 rc = iwl3945_send_cmd_sync(priv, &cmd);
3086 res = (struct iwl3945_rx_packet *)cmd.meta.u.skb->data;
3087 if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
3088 IWL_ERROR("Bad return from REPLY_RX_ON_ASSOC command\n");
3092 spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
3093 switch (spectrum_resp_status) {
3094 case 0: /* Command will be handled */
3095 if (res->u.spectrum.id != 0xff) {
3096 IWL_DEBUG_INFO("Replaced existing measurement: %d\n",
3097 res->u.spectrum.id);
3098 priv->measurement_status &= ~MEASUREMENT_READY;
3100 priv->measurement_status |= MEASUREMENT_ACTIVE;
3104 case 1: /* Command will not be handled */
3109 dev_kfree_skb_any(cmd.meta.u.skb);
3115 static void iwl3945_rx_reply_alive(struct iwl3945_priv *priv,
3116 struct iwl3945_rx_mem_buffer *rxb)
3118 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3119 struct iwl3945_alive_resp *palive;
3120 struct delayed_work *pwork;
3122 palive = &pkt->u.alive_frame;
3124 IWL_DEBUG_INFO("Alive ucode status 0x%08X revision "
3126 palive->is_valid, palive->ver_type,
3127 palive->ver_subtype);
3129 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
3130 IWL_DEBUG_INFO("Initialization Alive received.\n");
3131 memcpy(&priv->card_alive_init,
3132 &pkt->u.alive_frame,
3133 sizeof(struct iwl3945_init_alive_resp));
3134 pwork = &priv->init_alive_start;
3136 IWL_DEBUG_INFO("Runtime Alive received.\n");
3137 memcpy(&priv->card_alive, &pkt->u.alive_frame,
3138 sizeof(struct iwl3945_alive_resp));
3139 pwork = &priv->alive_start;
3140 iwl3945_disable_events(priv);
3143 /* We delay the ALIVE response by 5ms to
3144 * give the HW RF Kill time to activate... */
3145 if (palive->is_valid == UCODE_VALID_OK)
3146 queue_delayed_work(priv->workqueue, pwork,
3147 msecs_to_jiffies(5));
3149 IWL_WARNING("uCode did not respond OK.\n");
3152 static void iwl3945_rx_reply_add_sta(struct iwl3945_priv *priv,
3153 struct iwl3945_rx_mem_buffer *rxb)
3155 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3157 IWL_DEBUG_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
3161 static void iwl3945_rx_reply_error(struct iwl3945_priv *priv,
3162 struct iwl3945_rx_mem_buffer *rxb)
3164 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3166 IWL_ERROR("Error Reply type 0x%08X cmd %s (0x%02X) "
3167 "seq 0x%04X ser 0x%08X\n",
3168 le32_to_cpu(pkt->u.err_resp.error_type),
3169 get_cmd_string(pkt->u.err_resp.cmd_id),
3170 pkt->u.err_resp.cmd_id,
3171 le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
3172 le32_to_cpu(pkt->u.err_resp.error_info));
3175 #define TX_STATUS_ENTRY(x) case TX_STATUS_FAIL_ ## x: return #x
3177 static void iwl3945_rx_csa(struct iwl3945_priv *priv, struct iwl3945_rx_mem_buffer *rxb)
3179 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3180 struct iwl3945_rxon_cmd *rxon = (void *)&priv->active_rxon;
3181 struct iwl3945_csa_notification *csa = &(pkt->u.csa_notif);
3182 IWL_DEBUG_11H("CSA notif: channel %d, status %d\n",
3183 le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
3184 rxon->channel = csa->channel;
3185 priv->staging_rxon.channel = csa->channel;
3188 static void iwl3945_rx_spectrum_measure_notif(struct iwl3945_priv *priv,
3189 struct iwl3945_rx_mem_buffer *rxb)
3191 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
3192 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3193 struct iwl3945_spectrum_notification *report = &(pkt->u.spectrum_notif);
3195 if (!report->state) {
3196 IWL_DEBUG(IWL_DL_11H | IWL_DL_INFO,
3197 "Spectrum Measure Notification: Start\n");
3201 memcpy(&priv->measure_report, report, sizeof(*report));
3202 priv->measurement_status |= MEASUREMENT_READY;
3206 static void iwl3945_rx_pm_sleep_notif(struct iwl3945_priv *priv,
3207 struct iwl3945_rx_mem_buffer *rxb)
3209 #ifdef CONFIG_IWL3945_DEBUG
3210 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3211 struct iwl3945_sleep_notification *sleep = &(pkt->u.sleep_notif);
3212 IWL_DEBUG_RX("sleep mode: %d, src: %d\n",
3213 sleep->pm_sleep_mode, sleep->pm_wakeup_src);
3217 static void iwl3945_rx_pm_debug_statistics_notif(struct iwl3945_priv *priv,
3218 struct iwl3945_rx_mem_buffer *rxb)
3220 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3221 IWL_DEBUG_RADIO("Dumping %d bytes of unhandled "
3222 "notification for %s:\n",
3223 le32_to_cpu(pkt->len), get_cmd_string(pkt->hdr.cmd));
3224 iwl3945_print_hex_dump(IWL_DL_RADIO, pkt->u.raw, le32_to_cpu(pkt->len));
3227 static void iwl3945_bg_beacon_update(struct work_struct *work)
3229 struct iwl3945_priv *priv =
3230 container_of(work, struct iwl3945_priv, beacon_update);
3231 struct sk_buff *beacon;
3233 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
3234 beacon = ieee80211_beacon_get(priv->hw, priv->vif);
3237 IWL_ERROR("update beacon failed\n");
3241 mutex_lock(&priv->mutex);
3242 /* new beacon skb is allocated every time; dispose previous.*/
3243 if (priv->ibss_beacon)
3244 dev_kfree_skb(priv->ibss_beacon);
3246 priv->ibss_beacon = beacon;
3247 mutex_unlock(&priv->mutex);
3249 iwl3945_send_beacon_cmd(priv);
3252 static void iwl3945_rx_beacon_notif(struct iwl3945_priv *priv,
3253 struct iwl3945_rx_mem_buffer *rxb)
3255 #ifdef CONFIG_IWL3945_DEBUG
3256 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3257 struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
3258 u8 rate = beacon->beacon_notify_hdr.rate;
3260 IWL_DEBUG_RX("beacon status %x retries %d iss %d "
3261 "tsf %d %d rate %d\n",
3262 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
3263 beacon->beacon_notify_hdr.failure_frame,
3264 le32_to_cpu(beacon->ibss_mgr_status),
3265 le32_to_cpu(beacon->high_tsf),
3266 le32_to_cpu(beacon->low_tsf), rate);
3269 if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
3270 (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
3271 queue_work(priv->workqueue, &priv->beacon_update);
3274 /* Service response to REPLY_SCAN_CMD (0x80) */
3275 static void iwl3945_rx_reply_scan(struct iwl3945_priv *priv,
3276 struct iwl3945_rx_mem_buffer *rxb)
3278 #ifdef CONFIG_IWL3945_DEBUG
3279 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3280 struct iwl3945_scanreq_notification *notif =
3281 (struct iwl3945_scanreq_notification *)pkt->u.raw;
3283 IWL_DEBUG_RX("Scan request status = 0x%x\n", notif->status);
3287 /* Service SCAN_START_NOTIFICATION (0x82) */
3288 static void iwl3945_rx_scan_start_notif(struct iwl3945_priv *priv,
3289 struct iwl3945_rx_mem_buffer *rxb)
3291 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3292 struct iwl3945_scanstart_notification *notif =
3293 (struct iwl3945_scanstart_notification *)pkt->u.raw;
3294 priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
3295 IWL_DEBUG_SCAN("Scan start: "
3297 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
3299 notif->band ? "bg" : "a",
3301 notif->tsf_low, notif->status, notif->beacon_timer);
3304 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
3305 static void iwl3945_rx_scan_results_notif(struct iwl3945_priv *priv,
3306 struct iwl3945_rx_mem_buffer *rxb)
3308 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3309 struct iwl3945_scanresults_notification *notif =
3310 (struct iwl3945_scanresults_notification *)pkt->u.raw;
3312 IWL_DEBUG_SCAN("Scan ch.res: "
3314 "(TSF: 0x%08X:%08X) - %d "
3315 "elapsed=%lu usec (%dms since last)\n",
3317 notif->band ? "bg" : "a",
3318 le32_to_cpu(notif->tsf_high),
3319 le32_to_cpu(notif->tsf_low),
3320 le32_to_cpu(notif->statistics[0]),
3321 le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf,
3322 jiffies_to_msecs(elapsed_jiffies
3323 (priv->last_scan_jiffies, jiffies)));
3325 priv->last_scan_jiffies = jiffies;
3326 priv->next_scan_jiffies = 0;
3329 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
3330 static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
3331 struct iwl3945_rx_mem_buffer *rxb)
3333 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3334 struct iwl3945_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
3336 IWL_DEBUG_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
3337 scan_notif->scanned_channels,
3338 scan_notif->tsf_low,
3339 scan_notif->tsf_high, scan_notif->status);
3341 /* The HW is no longer scanning */
3342 clear_bit(STATUS_SCAN_HW, &priv->status);
3344 /* The scan completion notification came in, so kill that timer... */
3345 cancel_delayed_work(&priv->scan_check);
3347 IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
3348 (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
3350 jiffies_to_msecs(elapsed_jiffies
3351 (priv->scan_pass_start, jiffies)));
3353 /* Remove this scanned band from the list of pending
3354 * bands to scan, band G precedes A in order of scanning
3355 * as seen in iwl3945_bg_request_scan */
3356 if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
3357 priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
3358 else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ))
3359 priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
3361 /* If a request to abort was given, or the scan did not succeed
3362 * then we reset the scan state machine and terminate,
3363 * re-queuing another scan if one has been requested */
3364 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
3365 IWL_DEBUG_INFO("Aborted scan completed.\n");
3366 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
3368 /* If there are more bands on this scan pass reschedule */
3369 if (priv->scan_bands > 0)
3373 priv->last_scan_jiffies = jiffies;
3374 priv->next_scan_jiffies = 0;
3375 IWL_DEBUG_INFO("Setting scan to off\n");
3377 clear_bit(STATUS_SCANNING, &priv->status);
3379 IWL_DEBUG_INFO("Scan took %dms\n",
3380 jiffies_to_msecs(elapsed_jiffies(priv->scan_start, jiffies)));
3382 queue_work(priv->workqueue, &priv->scan_completed);
3387 priv->scan_pass_start = jiffies;
3388 queue_work(priv->workqueue, &priv->request_scan);
3391 /* Handle notification from uCode that card's power state is changing
3392 * due to software, hardware, or critical temperature RFKILL */
3393 static void iwl3945_rx_card_state_notif(struct iwl3945_priv *priv,
3394 struct iwl3945_rx_mem_buffer *rxb)
3396 struct iwl3945_rx_packet *pkt = (void *)rxb->skb->data;
3397 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
3398 unsigned long status = priv->status;
3400 IWL_DEBUG_RF_KILL("Card state received: HW:%s SW:%s\n",
3401 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
3402 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
3404 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_SET,
3405 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
3407 if (flags & HW_CARD_DISABLED)
3408 set_bit(STATUS_RF_KILL_HW, &priv->status);
3410 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3413 if (flags & SW_CARD_DISABLED)
3414 set_bit(STATUS_RF_KILL_SW, &priv->status);
3416 clear_bit(STATUS_RF_KILL_SW, &priv->status);
3418 iwl3945_scan_cancel(priv);
3420 if ((test_bit(STATUS_RF_KILL_HW, &status) !=
3421 test_bit(STATUS_RF_KILL_HW, &priv->status)) ||
3422 (test_bit(STATUS_RF_KILL_SW, &status) !=
3423 test_bit(STATUS_RF_KILL_SW, &priv->status)))
3424 queue_work(priv->workqueue, &priv->rf_kill);
3426 wake_up_interruptible(&priv->wait_command_queue);
3430 * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
3432 * Setup the RX handlers for each of the reply types sent from the uCode
3435 * This function chains into the hardware specific files for them to setup
3436 * any hardware specific handlers as well.
3438 static void iwl3945_setup_rx_handlers(struct iwl3945_priv *priv)
3440 priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
3441 priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
3442 priv->rx_handlers[REPLY_ERROR] = iwl3945_rx_reply_error;
3443 priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl3945_rx_csa;
3444 priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
3445 iwl3945_rx_spectrum_measure_notif;
3446 priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl3945_rx_pm_sleep_notif;
3447 priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
3448 iwl3945_rx_pm_debug_statistics_notif;
3449 priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
3452 * The same handler is used for both the REPLY to a discrete
3453 * statistics request from the host as well as for the periodic
3454 * statistics notifications (after received beacons) from the uCode.
3456 priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics;
3457 priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
3459 priv->rx_handlers[REPLY_SCAN_CMD] = iwl3945_rx_reply_scan;
3460 priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl3945_rx_scan_start_notif;
3461 priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
3462 iwl3945_rx_scan_results_notif;
3463 priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
3464 iwl3945_rx_scan_complete_notif;
3465 priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
3467 /* Set up hardware specific Rx handlers */
3468 iwl3945_hw_rx_handler_setup(priv);
3472 * iwl3945_cmd_queue_reclaim - Reclaim CMD queue entries
3473 * When FW advances 'R' index, all entries between old and new 'R' index
3474 * need to be reclaimed.
3476 static void iwl3945_cmd_queue_reclaim(struct iwl3945_priv *priv,
3477 int txq_id, int index)
3479 struct iwl3945_tx_queue *txq = &priv->txq[txq_id];
3480 struct iwl3945_queue *q = &txq->q;
3483 if ((index >= q->n_bd) || (iwl3945_x2_queue_used(q, index) == 0)) {
3484 IWL_ERROR("Read index for DMA queue txq id (%d), index %d, "
3485 "is out of range [0-%d] %d %d.\n", txq_id,
3486 index, q->n_bd, q->write_ptr, q->read_ptr);
3490 for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
3491 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
3493 IWL_ERROR("HCMD skipped: index (%d) %d %d\n", index,
3494 q->write_ptr, q->read_ptr);
3495 queue_work(priv->workqueue, &priv->restart);
3504 * iwl3945_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
3505 * @rxb: Rx buffer to reclaim
3507 * If an Rx buffer has an async callback associated with it the callback
3508 * will be executed. The attached skb (if present) will only be freed
3509 * if the callback returns 1
3511 static void iwl3945_tx_cmd_complete(struct iwl3945_priv *priv,
3512 struct iwl3945_rx_mem_buffer *rxb)
3514 struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
3515 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
3516 int txq_id = SEQ_TO_QUEUE(sequence);
3517 int index = SEQ_TO_INDEX(sequence);
3518 int huge = sequence & SEQ_HUGE_FRAME;
3520 struct iwl3945_cmd *cmd;
3522 BUG_ON(txq_id != IWL_CMD_QUEUE_NUM);
3524 cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
3525 cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
3527 /* Input error checking is done when commands are added to queue. */
3528 if (cmd->meta.flags & CMD_WANT_SKB) {
3529 cmd->meta.source->u.skb = rxb->skb;
3531 } else if (cmd->meta.u.callback &&
3532 !cmd->meta.u.callback(priv, cmd, rxb->skb))
3535 iwl3945_cmd_queue_reclaim(priv, txq_id, index);
3537 if (!(cmd->meta.flags & CMD_ASYNC)) {
3538 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
3539 wake_up_interruptible(&priv->wait_command_queue);
3543 /************************** RX-FUNCTIONS ****************************/
3545 * Rx theory of operation
3547 * The host allocates 32 DMA target addresses and passes the host address
3548 * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
3552 * The host/firmware share two index registers for managing the Rx buffers.
3554 * The READ index maps to the first position that the firmware may be writing
3555 * to -- the driver can read up to (but not including) this position and get
3557 * The READ index is managed by the firmware once the card is enabled.
3559 * The WRITE index maps to the last position the driver has read from -- the
3560 * position preceding WRITE is the last slot the firmware can place a packet.
3562 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
3565 * During initialization, the host sets up the READ queue position to the first
3566 * INDEX position, and WRITE to the last (READ - 1 wrapped)
3568 * When the firmware places a packet in a buffer, it will advance the READ index
3569 * and fire the RX interrupt. The driver can then query the READ index and
3570 * process as many packets as possible, moving the WRITE index forward as it
3571 * resets the Rx queue buffers with new memory.
3573 * The management in the driver is as follows:
3574 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
3575 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
3576 * to replenish the iwl->rxq->rx_free.
3577 * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
3578 * iwl->rxq is replenished and the READ INDEX is updated (updating the
3579 * 'processed' and 'read' driver indexes as well)
3580 * + A received packet is processed and handed to the kernel network stack,
3581 * detached from the iwl->rxq. The driver 'processed' index is updated.
3582 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
3583 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
3584 * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
3585 * were enough free buffers and RX_STALLED is set it is cleared.
3590 * iwl3945_rx_queue_alloc() Allocates rx_free
3591 * iwl3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
3592 * iwl3945_rx_queue_restock
3593 * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
3594 * queue, updates firmware pointers, and updates
3595 * the WRITE index. If insufficient rx_free buffers
3596 * are available, schedules iwl3945_rx_replenish
3598 * -- enable interrupts --
3599 * ISR - iwl3945_rx() Detach iwl3945_rx_mem_buffers from pool up to the
3600 * READ INDEX, detaching the SKB from the pool.
3601 * Moves the packet buffer from queue to rx_used.
3602 * Calls iwl3945_rx_queue_restock to refill any empty
3609 * iwl3945_rx_queue_space - Return number of free slots available in queue.
3611 static int iwl3945_rx_queue_space(const struct iwl3945_rx_queue *q)
3613 int s = q->read - q->write;
3616 /* keep some buffer to not confuse full and empty queue */
3624 * iwl3945_rx_queue_update_write_ptr - Update the write pointer for the RX queue
3626 int iwl3945_rx_queue_update_write_ptr(struct iwl3945_priv *priv, struct iwl3945_rx_queue *q)
3630 unsigned long flags;
3632 spin_lock_irqsave(&q->lock, flags);
3634 if (q->need_update == 0)
3637 /* If power-saving is in use, make sure device is awake */
3638 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
3639 reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
3641 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
3642 iwl3945_set_bit(priv, CSR_GP_CNTRL,
3643 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
3647 rc = iwl3945_grab_nic_access(priv);
3651 /* Device expects a multiple of 8 */
3652 iwl3945_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
3654 iwl3945_release_nic_access(priv);
3656 /* Else device is assumed to be awake */
3658 /* Device expects a multiple of 8 */
3659 iwl3945_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write & ~0x7);
3665 spin_unlock_irqrestore(&q->lock, flags);
3670 * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
3672 static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl3945_priv *priv,
3673 dma_addr_t dma_addr)
3675 return cpu_to_le32((u32)dma_addr);
3679 * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
3681 * If there are slots in the RX queue that need to be restocked,
3682 * and we have free pre-allocated buffers, fill the ranks as much
3683 * as we can, pulling from rx_free.
3685 * This moves the 'write' index forward to catch up with 'processed', and
3686 * also updates the memory address in the firmware to reference the new
3689 static int iwl3945_rx_queue_restock(struct iwl3945_priv *priv)
3691 struct iwl3945_rx_queue *rxq = &priv->rxq;
3692 struct list_head *element;
3693 struct iwl3945_rx_mem_buffer *rxb;
3694 unsigned long flags;
3697 spin_lock_irqsave(&rxq->lock, flags);
3698 write = rxq->write & ~0x7;
3699 while ((iwl3945_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
3700 /* Get next free Rx buffer, remove from free list */
3701 element = rxq->rx_free.next;
3702 rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
3705 /* Point to Rx buffer via next RBD in circular buffer */
3706 rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->dma_addr);
3707 rxq->queue[rxq->write] = rxb;
3708 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
3711 spin_unlock_irqrestore(&rxq->lock, flags);
3712 /* If the pre-allocated buffer pool is dropping low, schedule to
3714 if (rxq->free_count <= RX_LOW_WATERMARK)
3715 queue_work(priv->workqueue, &priv->rx_replenish);
3718 /* If we've added more space for the firmware to place data, tell it.
3719 * Increment device's write pointer in multiples of 8. */
3720 if ((write != (rxq->write & ~0x7))
3721 || (abs(rxq->write - rxq->read) > 7)) {
3722 spin_lock_irqsave(&rxq->lock, flags);
3723 rxq->need_update = 1;
3724 spin_unlock_irqrestore(&rxq->lock, flags);
3725 rc = iwl3945_rx_queue_update_write_ptr(priv, rxq);
3734 * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
3736 * When moving to rx_free an SKB is allocated for the slot.
3738 * Also restock the Rx queue via iwl3945_rx_queue_restock.
3739 * This is called as a scheduled work item (except for during initialization)
3741 static void iwl3945_rx_allocate(struct iwl3945_priv *priv)
3743 struct iwl3945_rx_queue *rxq = &priv->rxq;
3744 struct list_head *element;
3745 struct iwl3945_rx_mem_buffer *rxb;
3746 unsigned long flags;
3747 spin_lock_irqsave(&rxq->lock, flags);
3748 while (!list_empty(&rxq->rx_used)) {
3749 element = rxq->rx_used.next;
3750 rxb = list_entry(element, struct iwl3945_rx_mem_buffer, list);
3752 /* Alloc a new receive buffer */
3754 alloc_skb(IWL_RX_BUF_SIZE, __GFP_NOWARN | GFP_ATOMIC);
3756 if (net_ratelimit())
3757 printk(KERN_CRIT DRV_NAME
3758 ": Can not allocate SKB buffers\n");
3759 /* We don't reschedule replenish work here -- we will
3760 * call the restock method and if it still needs
3761 * more buffers it will schedule replenish */
3765 /* If radiotap head is required, reserve some headroom here.
3766 * The physical head count is a variable rx_stats->phy_count.
3767 * We reserve 4 bytes here. Plus these extra bytes, the
3768 * headroom of the physical head should be enough for the
3769 * radiotap head that iwl3945 supported. See iwl3945_rt.
3771 skb_reserve(rxb->skb, 4);
3773 priv->alloc_rxb_skb++;
3776 /* Get physical address of RB/SKB */
3778 pci_map_single(priv->pci_dev, rxb->skb->data,
3779 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3780 list_add_tail(&rxb->list, &rxq->rx_free);
3783 spin_unlock_irqrestore(&rxq->lock, flags);
3787 * this should be called while priv->lock is locked
3789 static void __iwl3945_rx_replenish(void *data)
3791 struct iwl3945_priv *priv = data;
3793 iwl3945_rx_allocate(priv);
3794 iwl3945_rx_queue_restock(priv);
3798 void iwl3945_rx_replenish(void *data)
3800 struct iwl3945_priv *priv = data;
3801 unsigned long flags;
3803 iwl3945_rx_allocate(priv);
3805 spin_lock_irqsave(&priv->lock, flags);
3806 iwl3945_rx_queue_restock(priv);
3807 spin_unlock_irqrestore(&priv->lock, flags);
3810 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
3811 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
3812 * This free routine walks the list of POOL entries and if SKB is set to
3813 * non NULL it is unmapped and freed
3815 static void iwl3945_rx_queue_free(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
3818 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
3819 if (rxq->pool[i].skb != NULL) {
3820 pci_unmap_single(priv->pci_dev,
3821 rxq->pool[i].dma_addr,
3822 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3823 dev_kfree_skb(rxq->pool[i].skb);
3827 pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
3832 int iwl3945_rx_queue_alloc(struct iwl3945_priv *priv)
3834 struct iwl3945_rx_queue *rxq = &priv->rxq;
3835 struct pci_dev *dev = priv->pci_dev;
3838 spin_lock_init(&rxq->lock);
3839 INIT_LIST_HEAD(&rxq->rx_free);
3840 INIT_LIST_HEAD(&rxq->rx_used);
3842 /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
3843 rxq->bd = pci_alloc_consistent(dev, 4 * RX_QUEUE_SIZE, &rxq->dma_addr);
3847 /* Fill the rx_used queue with _all_ of the Rx buffers */
3848 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
3849 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
3851 /* Set us so that we have processed and used all buffers, but have
3852 * not restocked the Rx queue with fresh buffers */
3853 rxq->read = rxq->write = 0;
3854 rxq->free_count = 0;
3855 rxq->need_update = 0;
3859 void iwl3945_rx_queue_reset(struct iwl3945_priv *priv, struct iwl3945_rx_queue *rxq)
3861 unsigned long flags;
3863 spin_lock_irqsave(&rxq->lock, flags);
3864 INIT_LIST_HEAD(&rxq->rx_free);
3865 INIT_LIST_HEAD(&rxq->rx_used);
3866 /* Fill the rx_used queue with _all_ of the Rx buffers */
3867 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
3868 /* In the reset function, these buffers may have been allocated
3869 * to an SKB, so we need to unmap and free potential storage */
3870 if (rxq->pool[i].skb != NULL) {
3871 pci_unmap_single(priv->pci_dev,
3872 rxq->pool[i].dma_addr,
3873 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
3874 priv->alloc_rxb_skb--;
3875 dev_kfree_skb(rxq->pool[i].skb);
3876 rxq->pool[i].skb = NULL;
3878 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
3881 /* Set us so that we have processed and used all buffers, but have
3882 * not restocked the Rx queue with fresh buffers */
3883 rxq->read = rxq->write = 0;
3884 rxq->free_count = 0;
3885 spin_unlock_irqrestore(&rxq->lock, flags);
3888 /* Convert linear signal-to-noise ratio into dB */
3889 static u8 ratio2dB[100] = {
3890 /* 0 1 2 3 4 5 6 7 8 9 */
3891 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
3892 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
3893 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
3894 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
3895 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
3896 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
3897 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
3898 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
3899 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
3900 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
3903 /* Calculates a relative dB value from a ratio of linear
3904 * (i.e. not dB) signal levels.
3905 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
3906 int iwl3945_calc_db_from_ratio(int sig_ratio)
3908 /* 1000:1 or higher just report as 60 dB */
3909 if (sig_ratio >= 1000)
3912 /* 100:1 or higher, divide by 10 and use table,
3913 * add 20 dB to make up for divide by 10 */
3914 if (sig_ratio >= 100)
3915 return (20 + (int)ratio2dB[sig_ratio/10]);
3917 /* We shouldn't see this */
3921 /* Use table for ratios 1:1 - 99:1 */
3922 return (int)ratio2dB[sig_ratio];
3925 #define PERFECT_RSSI (-20) /* dBm */
3926 #define WORST_RSSI (-95) /* dBm */
3927 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
3929 /* Calculate an indication of rx signal quality (a percentage, not dBm!).
3930 * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
3931 * about formulas used below. */
3932 int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
3935 int degradation = PERFECT_RSSI - rssi_dbm;
3937 /* If we get a noise measurement, use signal-to-noise ratio (SNR)
3938 * as indicator; formula is (signal dbm - noise dbm).
3939 * SNR at or above 40 is a great signal (100%).
3940 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
3941 * Weakest usable signal is usually 10 - 15 dB SNR. */
3943 if (rssi_dbm - noise_dbm >= 40)
3945 else if (rssi_dbm < noise_dbm)
3947 sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
3949 /* Else use just the signal level.
3950 * This formula is a least squares fit of data points collected and
3951 * compared with a reference system that had a percentage (%) display
3952 * for signal quality. */
3954 sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
3955 (15 * RSSI_RANGE + 62 * degradation)) /
3956 (RSSI_RANGE * RSSI_RANGE);
3960 else if (sig_qual < 1)
3967 * iwl3945_rx_handle - Main entry function for receiving responses from uCode
3969 * Uses the priv->rx_handlers callback function array to invoke
3970 * the appropriate handlers, including command responses,
3971 * frame-received notifications, and other notifications.
3973 static void iwl3945_rx_handle(struct iwl3945_priv *priv)
3975 struct iwl3945_rx_mem_buffer *rxb;
3976 struct iwl3945_rx_packet *pkt;
3977 struct iwl3945_rx_queue *rxq = &priv->rxq;
3980 unsigned long flags;
3984 /* uCode's read index (stored in shared DRAM) indicates the last Rx
3985 * buffer that the driver may process (last buffer filled by ucode). */
3986 r = iwl3945_hw_get_rx_read(priv);
3989 if (iwl3945_rx_queue_space(rxq) > (RX_QUEUE_SIZE / 2))
3991 /* Rx interrupt, but nothing sent from uCode */
3993 IWL_DEBUG(IWL_DL_RX | IWL_DL_ISR, "r = %d, i = %d\n", r, i);
3996 rxb = rxq->queue[i];
3998 /* If an RXB doesn't have a Rx queue slot associated with it,
3999 * then a bug has been introduced in the queue refilling
4000 * routines -- catch it here */
4001 BUG_ON(rxb == NULL);
4003 rxq->queue[i] = NULL;
4005 pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->dma_addr,
4007 PCI_DMA_FROMDEVICE);
4008 pkt = (struct iwl3945_rx_packet *)rxb->skb->data;
4010 /* Reclaim a command buffer only if this packet is a response
4011 * to a (driver-originated) command.
4012 * If the packet (e.g. Rx frame) originated from uCode,
4013 * there is no command buffer to reclaim.
4014 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
4015 * but apparently a few don't get set; catch them here. */
4016 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
4017 (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
4018 (pkt->hdr.cmd != REPLY_TX);
4020 /* Based on type of command response or notification,
4021 * handle those that need handling via function in
4022 * rx_handlers table. See iwl3945_setup_rx_handlers() */
4023 if (priv->rx_handlers[pkt->hdr.cmd]) {
4024 IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
4025 "r = %d, i = %d, %s, 0x%02x\n", r, i,
4026 get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
4027 priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
4029 /* No handling needed */
4030 IWL_DEBUG(IWL_DL_HOST_COMMAND | IWL_DL_RX | IWL_DL_ISR,
4031 "r %d i %d No handler needed for %s, 0x%02x\n",
4032 r, i, get_cmd_string(pkt->hdr.cmd),
4037 /* Invoke any callbacks, transfer the skb to caller, and
4038 * fire off the (possibly) blocking iwl3945_send_cmd()
4039 * as we reclaim the driver command queue */
4040 if (rxb && rxb->skb)
4041 iwl3945_tx_cmd_complete(priv, rxb);
4043 IWL_WARNING("Claim null rxb?\n");
4046 /* For now we just don't re-use anything. We can tweak this
4047 * later to try and re-use notification packets and SKBs that
4048 * fail to Rx correctly */
4049 if (rxb->skb != NULL) {
4050 priv->alloc_rxb_skb--;
4051 dev_kfree_skb_any(rxb->skb);
4055 pci_unmap_single(priv->pci_dev, rxb->dma_addr,
4056 IWL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
4057 spin_lock_irqsave(&rxq->lock, flags);
4058 list_add_tail(&rxb->list, &priv->rxq.rx_used);
4059 spin_unlock_irqrestore(&rxq->lock, flags);
4060 i = (i + 1) & RX_QUEUE_MASK;
4061 /* If there are a lot of unused frames,
4062 * restock the Rx queue so ucode won't assert. */
4067 __iwl3945_rx_replenish(priv);
4073 /* Backtrack one entry */
4075 iwl3945_rx_queue_restock(priv);
4079 * iwl3945_tx_queue_update_write_ptr - Send new write index to hardware
4081 static int iwl3945_tx_queue_update_write_ptr(struct iwl3945_priv *priv,
4082 struct iwl3945_tx_queue *txq)
4086 int txq_id = txq->q.id;
4088 if (txq->need_update == 0)
4091 /* if we're trying to save power */
4092 if (test_bit(STATUS_POWER_PMI, &priv->status)) {
4093 /* wake up nic if it's powered down ...
4094 * uCode will wake up, and interrupt us again, so next
4095 * time we'll skip this part. */
4096 reg = iwl3945_read32(priv, CSR_UCODE_DRV_GP1);
4098 if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
4099 IWL_DEBUG_INFO("Requesting wakeup, GP1 = 0x%x\n", reg);
4100 iwl3945_set_bit(priv, CSR_GP_CNTRL,
4101 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
4105 /* restore this queue's parameters in nic hardware. */
4106 rc = iwl3945_grab_nic_access(priv);
4109 iwl3945_write_direct32(priv, HBUS_TARG_WRPTR,
4110 txq->q.write_ptr | (txq_id << 8));
4111 iwl3945_release_nic_access(priv);
4113 /* else not in power-save mode, uCode will never sleep when we're
4114 * trying to tx (during RFKILL, we're not trying to tx). */
4116 iwl3945_write32(priv, HBUS_TARG_WRPTR,
4117 txq->q.write_ptr | (txq_id << 8));
4119 txq->need_update = 0;
4124 #ifdef CONFIG_IWL3945_DEBUG
4125 static void iwl3945_print_rx_config_cmd(struct iwl3945_rxon_cmd *rxon)
4127 DECLARE_MAC_BUF(mac);
4129 IWL_DEBUG_RADIO("RX CONFIG:\n");
4130 iwl3945_print_hex_dump(IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
4131 IWL_DEBUG_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
4132 IWL_DEBUG_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
4133 IWL_DEBUG_RADIO("u32 filter_flags: 0x%08x\n",
4134 le32_to_cpu(rxon->filter_flags));
4135 IWL_DEBUG_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
4136 IWL_DEBUG_RADIO("u8 ofdm_basic_rates: 0x%02x\n",
4137 rxon->ofdm_basic_rates);
4138 IWL_DEBUG_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
4139 IWL_DEBUG_RADIO("u8[6] node_addr: %s\n",
4140 print_mac(mac, rxon->node_addr));
4141 IWL_DEBUG_RADIO("u8[6] bssid_addr: %s\n",
4142 print_mac(mac, rxon->bssid_addr));
4143 IWL_DEBUG_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
4147 static void iwl3945_enable_interrupts(struct iwl3945_priv *priv)
4149 IWL_DEBUG_ISR("Enabling interrupts\n");
4150 set_bit(STATUS_INT_ENABLED, &priv->status);
4151 iwl3945_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
4155 /* call this function to flush any scheduled tasklet */
4156 static inline void iwl_synchronize_irq(struct iwl3945_priv *priv)
4158 /* wait to make sure we flush pedding tasklet*/
4159 synchronize_irq(priv->pci_dev->irq);
4160 tasklet_kill(&priv->irq_tasklet);
4164 static inline void iwl3945_disable_interrupts(struct iwl3945_priv *priv)
4166 clear_bit(STATUS_INT_ENABLED, &priv->status);
4168 /* disable interrupts from uCode/NIC to host */
4169 iwl3945_write32(priv, CSR_INT_MASK, 0x00000000);
4171 /* acknowledge/clear/reset any interrupts still pending
4172 * from uCode or flow handler (Rx/Tx DMA) */
4173 iwl3945_write32(priv, CSR_INT, 0xffffffff);
4174 iwl3945_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
4175 IWL_DEBUG_ISR("Disabled interrupts\n");
4178 static const char *desc_lookup(int i)
4186 return "BAD_CHECKSUM";
4188 return "NMI_INTERRUPT";
4192 return "FATAL_ERROR";
4198 #define ERROR_START_OFFSET (1 * sizeof(u32))
4199 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
4201 static void iwl3945_dump_nic_error_log(struct iwl3945_priv *priv)
4204 u32 desc, time, count, base, data1;
4205 u32 blink1, blink2, ilink1, ilink2;
4208 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
4210 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
4211 IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
4215 rc = iwl3945_grab_nic_access(priv);
4217 IWL_WARNING("Can not read from adapter at this time.\n");
4221 count = iwl3945_read_targ_mem(priv, base);
4223 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
4224 IWL_ERROR("Start IWL Error Log Dump:\n");
4225 IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
4228 IWL_ERROR("Desc Time asrtPC blink2 "
4229 "ilink1 nmiPC Line\n");
4230 for (i = ERROR_START_OFFSET;
4231 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
4232 i += ERROR_ELEM_SIZE) {
4233 desc = iwl3945_read_targ_mem(priv, base + i);
4235 iwl3945_read_targ_mem(priv, base + i + 1 * sizeof(u32));
4237 iwl3945_read_targ_mem(priv, base + i + 2 * sizeof(u32));
4239 iwl3945_read_targ_mem(priv, base + i + 3 * sizeof(u32));
4241 iwl3945_read_targ_mem(priv, base + i + 4 * sizeof(u32));
4243 iwl3945_read_targ_mem(priv, base + i + 5 * sizeof(u32));
4245 iwl3945_read_targ_mem(priv, base + i + 6 * sizeof(u32));
4248 ("%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
4249 desc_lookup(desc), desc, time, blink1, blink2,
4250 ilink1, ilink2, data1);
4253 iwl3945_release_nic_access(priv);
4257 #define EVENT_START_OFFSET (6 * sizeof(u32))
4260 * iwl3945_print_event_log - Dump error event log to syslog
4262 * NOTE: Must be called with iwl3945_grab_nic_access() already obtained!
4264 static void iwl3945_print_event_log(struct iwl3945_priv *priv, u32 start_idx,
4265 u32 num_events, u32 mode)
4268 u32 base; /* SRAM byte address of event log header */
4269 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
4270 u32 ptr; /* SRAM byte address of log data */
4271 u32 ev, time, data; /* event log data */
4273 if (num_events == 0)
4276 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
4279 event_size = 2 * sizeof(u32);
4281 event_size = 3 * sizeof(u32);
4283 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
4285 /* "time" is actually "data" for mode 0 (no timestamp).
4286 * place event id # at far right for easier visual parsing. */
4287 for (i = 0; i < num_events; i++) {
4288 ev = iwl3945_read_targ_mem(priv, ptr);
4290 time = iwl3945_read_targ_mem(priv, ptr);
4293 IWL_ERROR("0x%08x\t%04u\n", time, ev); /* data, ev */
4295 data = iwl3945_read_targ_mem(priv, ptr);
4297 IWL_ERROR("%010u\t0x%08x\t%04u\n", time, data, ev);
4302 static void iwl3945_dump_nic_event_log(struct iwl3945_priv *priv)
4305 u32 base; /* SRAM byte address of event log header */
4306 u32 capacity; /* event log capacity in # entries */
4307 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
4308 u32 num_wraps; /* # times uCode wrapped to top of log */
4309 u32 next_entry; /* index of next entry to be written by uCode */
4310 u32 size; /* # entries that we'll print */
4312 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
4313 if (!iwl3945_hw_valid_rtc_data_addr(base)) {
4314 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
4318 rc = iwl3945_grab_nic_access(priv);
4320 IWL_WARNING("Can not read from adapter at this time.\n");
4324 /* event log header */
4325 capacity = iwl3945_read_targ_mem(priv, base);
4326 mode = iwl3945_read_targ_mem(priv, base + (1 * sizeof(u32)));
4327 num_wraps = iwl3945_read_targ_mem(priv, base + (2 * sizeof(u32)));
4328 next_entry = iwl3945_read_targ_mem(priv, base + (3 * sizeof(u32)));
4330 size = num_wraps ? capacity : next_entry;
4332 /* bail out if nothing in log */
4334 IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
4335 iwl3945_release_nic_access(priv);
4339 IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
4342 /* if uCode has wrapped back to top of log, start at the oldest entry,
4343 * i.e the next one that uCode would fill. */
4345 iwl3945_print_event_log(priv, next_entry,
4346 capacity - next_entry, mode);
4348 /* (then/else) start at top of log */
4349 iwl3945_print_event_log(priv, 0, next_entry, mode);
4351 iwl3945_release_nic_access(priv);
4355 * iwl3945_irq_handle_error - called for HW or SW error interrupt from card
4357 static void iwl3945_irq_handle_error(struct iwl3945_priv *priv)
4359 /* Set the FW error flag -- cleared on iwl3945_down */
4360 set_bit(STATUS_FW_ERROR, &priv->status);
4362 /* Cancel currently queued command. */
4363 clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
4365 #ifdef CONFIG_IWL3945_DEBUG
4366 if (iwl3945_debug_level & IWL_DL_FW_ERRORS) {
4367 iwl3945_dump_nic_error_log(priv);
4368 iwl3945_dump_nic_event_log(priv);
4369 iwl3945_print_rx_config_cmd(&priv->staging_rxon);
4373 wake_up_interruptible(&priv->wait_command_queue);
4375 /* Keep the restart process from trying to send host
4376 * commands by clearing the INIT status bit */
4377 clear_bit(STATUS_READY, &priv->status);
4379 if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
4380 IWL_DEBUG(IWL_DL_INFO | IWL_DL_FW_ERRORS,
4381 "Restarting adapter due to uCode error.\n");
4383 if (iwl3945_is_associated(priv)) {
4384 memcpy(&priv->recovery_rxon, &priv->active_rxon,
4385 sizeof(priv->recovery_rxon));
4386 priv->error_recovering = 1;
4388 queue_work(priv->workqueue, &priv->restart);
4392 static void iwl3945_error_recovery(struct iwl3945_priv *priv)
4394 unsigned long flags;
4396 memcpy(&priv->staging_rxon, &priv->recovery_rxon,
4397 sizeof(priv->staging_rxon));
4398 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
4399 iwl3945_commit_rxon(priv);
4401 iwl3945_add_station(priv, priv->bssid, 1, 0);
4403 spin_lock_irqsave(&priv->lock, flags);
4404 priv->assoc_id = le16_to_cpu(priv->staging_rxon.assoc_id);
4405 priv->error_recovering = 0;
4406 spin_unlock_irqrestore(&priv->lock, flags);
4409 static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
4411 u32 inta, handled = 0;
4413 unsigned long flags;
4414 #ifdef CONFIG_IWL3945_DEBUG
4418 spin_lock_irqsave(&priv->lock, flags);
4420 /* Ack/clear/reset pending uCode interrupts.
4421 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
4422 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
4423 inta = iwl3945_read32(priv, CSR_INT);
4424 iwl3945_write32(priv, CSR_INT, inta);
4426 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
4427 * Any new interrupts that happen after this, either while we're
4428 * in this tasklet, or later, will show up in next ISR/tasklet. */
4429 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4430 iwl3945_write32(priv, CSR_FH_INT_STATUS, inta_fh);
4432 #ifdef CONFIG_IWL3945_DEBUG
4433 if (iwl3945_debug_level & IWL_DL_ISR) {
4434 /* just for debug */
4435 inta_mask = iwl3945_read32(priv, CSR_INT_MASK);
4436 IWL_DEBUG_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4437 inta, inta_mask, inta_fh);
4441 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
4442 * atomic, make sure that inta covers all the interrupts that
4443 * we've discovered, even if FH interrupt came in just after
4444 * reading CSR_INT. */
4445 if (inta_fh & CSR39_FH_INT_RX_MASK)
4446 inta |= CSR_INT_BIT_FH_RX;
4447 if (inta_fh & CSR39_FH_INT_TX_MASK)
4448 inta |= CSR_INT_BIT_FH_TX;
4450 /* Now service all interrupt bits discovered above. */
4451 if (inta & CSR_INT_BIT_HW_ERR) {
4452 IWL_ERROR("Microcode HW error detected. Restarting.\n");
4454 /* Tell the device to stop sending interrupts */
4455 iwl3945_disable_interrupts(priv);
4457 iwl3945_irq_handle_error(priv);
4459 handled |= CSR_INT_BIT_HW_ERR;
4461 spin_unlock_irqrestore(&priv->lock, flags);
4466 #ifdef CONFIG_IWL3945_DEBUG
4467 if (iwl3945_debug_level & (IWL_DL_ISR)) {
4468 /* NIC fires this, but we don't use it, redundant with WAKEUP */
4469 if (inta & CSR_INT_BIT_SCD)
4470 IWL_DEBUG_ISR("Scheduler finished to transmit "
4471 "the frame/frames.\n");
4473 /* Alive notification via Rx interrupt will do the real work */
4474 if (inta & CSR_INT_BIT_ALIVE)
4475 IWL_DEBUG_ISR("Alive interrupt\n");
4478 /* Safely ignore these bits for debug checks below */
4479 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
4481 /* HW RF KILL switch toggled (4965 only) */
4482 if (inta & CSR_INT_BIT_RF_KILL) {
4484 if (!(iwl3945_read32(priv, CSR_GP_CNTRL) &
4485 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
4488 IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
4489 "RF_KILL bit toggled to %s.\n",
4490 hw_rf_kill ? "disable radio":"enable radio");
4492 /* Queue restart only if RF_KILL switch was set to "kill"
4493 * when we loaded driver, and is now set to "enable".
4494 * After we're Alive, RF_KILL gets handled by
4495 * iwl3945_rx_card_state_notif() */
4496 if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
4497 clear_bit(STATUS_RF_KILL_HW, &priv->status);
4498 queue_work(priv->workqueue, &priv->restart);
4501 handled |= CSR_INT_BIT_RF_KILL;
4504 /* Chip got too hot and stopped itself (4965 only) */
4505 if (inta & CSR_INT_BIT_CT_KILL) {
4506 IWL_ERROR("Microcode CT kill error detected.\n");
4507 handled |= CSR_INT_BIT_CT_KILL;
4510 /* Error detected by uCode */
4511 if (inta & CSR_INT_BIT_SW_ERR) {
4512 IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
4514 iwl3945_irq_handle_error(priv);
4515 handled |= CSR_INT_BIT_SW_ERR;
4518 /* uCode wakes up after power-down sleep */
4519 if (inta & CSR_INT_BIT_WAKEUP) {
4520 IWL_DEBUG_ISR("Wakeup interrupt\n");
4521 iwl3945_rx_queue_update_write_ptr(priv, &priv->rxq);
4522 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[0]);
4523 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[1]);
4524 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[2]);
4525 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[3]);
4526 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[4]);
4527 iwl3945_tx_queue_update_write_ptr(priv, &priv->txq[5]);
4529 handled |= CSR_INT_BIT_WAKEUP;
4532 /* All uCode command responses, including Tx command responses,
4533 * Rx "responses" (frame-received notification), and other
4534 * notifications from uCode come through here*/
4535 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
4536 iwl3945_rx_handle(priv);
4537 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
4540 if (inta & CSR_INT_BIT_FH_TX) {
4541 IWL_DEBUG_ISR("Tx interrupt\n");
4543 iwl3945_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
4544 if (!iwl3945_grab_nic_access(priv)) {
4545 iwl3945_write_direct32(priv,
4547 (ALM_FH_SRVC_CHNL), 0x0);
4548 iwl3945_release_nic_access(priv);
4550 handled |= CSR_INT_BIT_FH_TX;
4553 if (inta & ~handled)
4554 IWL_ERROR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
4556 if (inta & ~CSR_INI_SET_MASK) {
4557 IWL_WARNING("Disabled INTA bits 0x%08x were pending\n",
4558 inta & ~CSR_INI_SET_MASK);
4559 IWL_WARNING(" with FH_INT = 0x%08x\n", inta_fh);
4562 /* Re-enable all interrupts */
4563 /* only Re-enable if disabled by irq */
4564 if (test_bit(STATUS_INT_ENABLED, &priv->status))
4565 iwl3945_enable_interrupts(priv);
4567 #ifdef CONFIG_IWL3945_DEBUG
4568 if (iwl3945_debug_level & (IWL_DL_ISR)) {
4569 inta = iwl3945_read32(priv, CSR_INT);
4570 inta_mask = iwl3945_read32(priv, CSR_INT_MASK);
4571 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4572 IWL_DEBUG_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
4573 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
4576 spin_unlock_irqrestore(&priv->lock, flags);
4579 static irqreturn_t iwl3945_isr(int irq, void *data)
4581 struct iwl3945_priv *priv = data;
4582 u32 inta, inta_mask;
4587 spin_lock(&priv->lock);
4589 /* Disable (but don't clear!) interrupts here to avoid
4590 * back-to-back ISRs and sporadic interrupts from our NIC.
4591 * If we have something to service, the tasklet will re-enable ints.
4592 * If we *don't* have something, we'll re-enable before leaving here. */
4593 inta_mask = iwl3945_read32(priv, CSR_INT_MASK); /* just for debug */
4594 iwl3945_write32(priv, CSR_INT_MASK, 0x00000000);
4596 /* Discover which interrupts are active/pending */
4597 inta = iwl3945_read32(priv, CSR_INT);
4598 inta_fh = iwl3945_read32(priv, CSR_FH_INT_STATUS);
4600 /* Ignore interrupt if there's nothing in NIC to service.
4601 * This may be due to IRQ shared with another device,
4602 * or due to sporadic interrupts thrown from our NIC. */
4603 if (!inta && !inta_fh) {
4604 IWL_DEBUG_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
4608 if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
4609 /* Hardware disappeared */
4610 IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
4614 IWL_DEBUG_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
4615 inta, inta_mask, inta_fh);
4617 inta &= ~CSR_INT_BIT_SCD;
4619 /* iwl3945_irq_tasklet() will service interrupts and re-enable them */
4620 if (likely(inta || inta_fh))
4621 tasklet_schedule(&priv->irq_tasklet);
4623 spin_unlock(&priv->lock);
4628 /* re-enable interrupts here since we don't have anything to service. */
4629 /* only Re-enable if disabled by irq */
4630 if (test_bit(STATUS_INT_ENABLED, &priv->status))
4631 iwl3945_enable_interrupts(priv);
4632 spin_unlock(&priv->lock);
4636 /************************** EEPROM BANDS ****************************
4638 * The iwl3945_eeprom_band definitions below provide the mapping from the
4639 * EEPROM contents to the specific channel number supported for each
4642 * For example, iwl3945_priv->eeprom.band_3_channels[4] from the band_3
4643 * definition below maps to physical channel 42 in the 5.2GHz spectrum.
4644 * The specific geography and calibration information for that channel
4645 * is contained in the eeprom map itself.
4647 * During init, we copy the eeprom information and channel map
4648 * information into priv->channel_info_24/52 and priv->channel_map_24/52
4650 * channel_map_24/52 provides the index in the channel_info array for a
4651 * given channel. We have to have two separate maps as there is channel
4652 * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
4655 * A value of 0xff stored in the channel_map indicates that the channel
4656 * is not supported by the hardware at all.
4658 * A value of 0xfe in the channel_map indicates that the channel is not
4659 * valid for Tx with the current hardware. This means that
4660 * while the system can tune and receive on a given channel, it may not
4661 * be able to associate or transmit any frames on that
4662 * channel. There is no corresponding channel information for that
4665 *********************************************************************/
4668 static const u8 iwl3945_eeprom_band_1[14] = {
4669 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
4673 static const u8 iwl3945_eeprom_band_2[] = { /* 4915-5080MHz */
4674 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
4677 static const u8 iwl3945_eeprom_band_3[] = { /* 5170-5320MHz */
4678 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
4681 static const u8 iwl3945_eeprom_band_4[] = { /* 5500-5700MHz */
4682 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
4685 static const u8 iwl3945_eeprom_band_5[] = { /* 5725-5825MHz */
4686 145, 149, 153, 157, 161, 165
4689 static void iwl3945_init_band_reference(const struct iwl3945_priv *priv, int band,
4690 int *eeprom_ch_count,
4691 const struct iwl3945_eeprom_channel
4693 const u8 **eeprom_ch_index)
4696 case 1: /* 2.4GHz band */
4697 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_1);
4698 *eeprom_ch_info = priv->eeprom.band_1_channels;
4699 *eeprom_ch_index = iwl3945_eeprom_band_1;
4701 case 2: /* 4.9GHz band */
4702 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_2);
4703 *eeprom_ch_info = priv->eeprom.band_2_channels;
4704 *eeprom_ch_index = iwl3945_eeprom_band_2;
4706 case 3: /* 5.2GHz band */
4707 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_3);
4708 *eeprom_ch_info = priv->eeprom.band_3_channels;
4709 *eeprom_ch_index = iwl3945_eeprom_band_3;
4711 case 4: /* 5.5GHz band */
4712 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_4);
4713 *eeprom_ch_info = priv->eeprom.band_4_channels;
4714 *eeprom_ch_index = iwl3945_eeprom_band_4;
4716 case 5: /* 5.7GHz band */
4717 *eeprom_ch_count = ARRAY_SIZE(iwl3945_eeprom_band_5);
4718 *eeprom_ch_info = priv->eeprom.band_5_channels;
4719 *eeprom_ch_index = iwl3945_eeprom_band_5;
4728 * iwl3945_get_channel_info - Find driver's private channel info
4730 * Based on band and channel number.
4732 const struct iwl3945_channel_info *iwl3945_get_channel_info(const struct iwl3945_priv *priv,
4733 enum ieee80211_band band, u16 channel)
4738 case IEEE80211_BAND_5GHZ:
4739 for (i = 14; i < priv->channel_count; i++) {
4740 if (priv->channel_info[i].channel == channel)
4741 return &priv->channel_info[i];
4745 case IEEE80211_BAND_2GHZ:
4746 if (channel >= 1 && channel <= 14)
4747 return &priv->channel_info[channel - 1];
4749 case IEEE80211_NUM_BANDS:
4756 #define CHECK_AND_PRINT(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
4760 * iwl3945_init_channel_map - Set up driver's info for all possible channels
4762 static int iwl3945_init_channel_map(struct iwl3945_priv *priv)
4764 int eeprom_ch_count = 0;
4765 const u8 *eeprom_ch_index = NULL;
4766 const struct iwl3945_eeprom_channel *eeprom_ch_info = NULL;
4768 struct iwl3945_channel_info *ch_info;
4770 if (priv->channel_count) {
4771 IWL_DEBUG_INFO("Channel map already initialized.\n");
4775 if (priv->eeprom.version < 0x2f) {
4776 IWL_WARNING("Unsupported EEPROM version: 0x%04X\n",
4777 priv->eeprom.version);
4781 IWL_DEBUG_INFO("Initializing regulatory info from EEPROM\n");
4783 priv->channel_count =
4784 ARRAY_SIZE(iwl3945_eeprom_band_1) +
4785 ARRAY_SIZE(iwl3945_eeprom_band_2) +
4786 ARRAY_SIZE(iwl3945_eeprom_band_3) +
4787 ARRAY_SIZE(iwl3945_eeprom_band_4) +
4788 ARRAY_SIZE(iwl3945_eeprom_band_5);
4790 IWL_DEBUG_INFO("Parsing data for %d channels.\n", priv->channel_count);
4792 priv->channel_info = kzalloc(sizeof(struct iwl3945_channel_info) *
4793 priv->channel_count, GFP_KERNEL);
4794 if (!priv->channel_info) {
4795 IWL_ERROR("Could not allocate channel_info\n");
4796 priv->channel_count = 0;
4800 ch_info = priv->channel_info;
4802 /* Loop through the 5 EEPROM bands adding them in order to the
4803 * channel map we maintain (that contains additional information than
4804 * what just in the EEPROM) */
4805 for (band = 1; band <= 5; band++) {
4807 iwl3945_init_band_reference(priv, band, &eeprom_ch_count,
4808 &eeprom_ch_info, &eeprom_ch_index);
4810 /* Loop through each band adding each of the channels */
4811 for (ch = 0; ch < eeprom_ch_count; ch++) {
4812 ch_info->channel = eeprom_ch_index[ch];
4813 ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
4814 IEEE80211_BAND_5GHZ;
4816 /* permanently store EEPROM's channel regulatory flags
4817 * and max power in channel info database. */
4818 ch_info->eeprom = eeprom_ch_info[ch];
4820 /* Copy the run-time flags so they are there even on
4821 * invalid channels */
4822 ch_info->flags = eeprom_ch_info[ch].flags;
4824 if (!(is_channel_valid(ch_info))) {
4825 IWL_DEBUG_INFO("Ch. %d Flags %x [%sGHz] - "
4829 is_channel_a_band(ch_info) ?
4835 /* Initialize regulatory-based run-time data */
4836 ch_info->max_power_avg = ch_info->curr_txpow =
4837 eeprom_ch_info[ch].max_power_avg;
4838 ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
4839 ch_info->min_power = 0;
4841 IWL_DEBUG_INFO("Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
4842 " %ddBm): Ad-Hoc %ssupported\n",
4844 is_channel_a_band(ch_info) ?
4846 CHECK_AND_PRINT(VALID),
4847 CHECK_AND_PRINT(IBSS),
4848 CHECK_AND_PRINT(ACTIVE),
4849 CHECK_AND_PRINT(RADAR),
4850 CHECK_AND_PRINT(WIDE),
4851 CHECK_AND_PRINT(DFS),
4852 eeprom_ch_info[ch].flags,
4853 eeprom_ch_info[ch].max_power_avg,
4854 ((eeprom_ch_info[ch].
4855 flags & EEPROM_CHANNEL_IBSS)
4856 && !(eeprom_ch_info[ch].
4857 flags & EEPROM_CHANNEL_RADAR))
4860 /* Set the user_txpower_limit to the highest power
4861 * supported by any channel */
4862 if (eeprom_ch_info[ch].max_power_avg >
4863 priv->user_txpower_limit)
4864 priv->user_txpower_limit =
4865 eeprom_ch_info[ch].max_power_avg;
4871 /* Set up txpower settings in driver for all channels */
4872 if (iwl3945_txpower_set_from_eeprom(priv))
4879 * iwl3945_free_channel_map - undo allocations in iwl3945_init_channel_map
4881 static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
4883 kfree(priv->channel_info);
4884 priv->channel_count = 0;
4887 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
4888 * sending probe req. This should be set long enough to hear probe responses
4889 * from more than one AP. */
4890 #define IWL_ACTIVE_DWELL_TIME_24 (20) /* all times in msec */
4891 #define IWL_ACTIVE_DWELL_TIME_52 (10)
4893 /* For faster active scanning, scan will move to the next channel if fewer than
4894 * PLCP_QUIET_THRESH packets are heard on this channel within
4895 * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
4896 * time if it's a quiet channel (nothing responded to our probe, and there's
4897 * no other traffic).
4898 * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
4899 #define IWL_PLCP_QUIET_THRESH __constant_cpu_to_le16(1) /* packets */
4900 #define IWL_ACTIVE_QUIET_TIME __constant_cpu_to_le16(5) /* msec */
4902 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
4903 * Must be set longer than active dwell time.
4904 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
4905 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
4906 #define IWL_PASSIVE_DWELL_TIME_52 (10)
4907 #define IWL_PASSIVE_DWELL_BASE (100)
4908 #define IWL_CHANNEL_TUNE_TIME 5
4910 static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv,
4911 enum ieee80211_band band)
4913 if (band == IEEE80211_BAND_5GHZ)
4914 return IWL_ACTIVE_DWELL_TIME_52;
4916 return IWL_ACTIVE_DWELL_TIME_24;
4919 static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
4920 enum ieee80211_band band)
4922 u16 active = iwl3945_get_active_dwell_time(priv, band);
4923 u16 passive = (band == IEEE80211_BAND_2GHZ) ?
4924 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
4925 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
4927 if (iwl3945_is_associated(priv)) {
4928 /* If we're associated, we clamp the maximum passive
4929 * dwell time to be 98% of the beacon interval (minus
4930 * 2 * channel tune time) */
4931 passive = priv->beacon_int;
4932 if ((passive > IWL_PASSIVE_DWELL_BASE) || !passive)
4933 passive = IWL_PASSIVE_DWELL_BASE;
4934 passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
4937 if (passive <= active)
4938 passive = active + 1;
4943 static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
4944 enum ieee80211_band band,
4945 u8 is_active, u8 direct_mask,
4946 struct iwl3945_scan_channel *scan_ch)
4948 const struct ieee80211_channel *channels = NULL;
4949 const struct ieee80211_supported_band *sband;
4950 const struct iwl3945_channel_info *ch_info;
4951 u16 passive_dwell = 0;
4952 u16 active_dwell = 0;
4955 sband = iwl3945_get_band(priv, band);
4959 channels = sband->channels;
4961 active_dwell = iwl3945_get_active_dwell_time(priv, band);
4962 passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
4964 for (i = 0, added = 0; i < sband->n_channels; i++) {
4965 if (channels[i].flags & IEEE80211_CHAN_DISABLED)
4968 scan_ch->channel = channels[i].hw_value;
4970 ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
4971 if (!is_channel_valid(ch_info)) {
4972 IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
4977 if (!is_active || is_channel_passive(ch_info) ||
4978 (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
4979 scan_ch->type = 0; /* passive */
4981 scan_ch->type = 1; /* active */
4983 if (scan_ch->type & 1)
4984 scan_ch->type |= (direct_mask << 1);
4986 scan_ch->active_dwell = cpu_to_le16(active_dwell);
4987 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
4989 /* Set txpower levels to defaults */
4990 scan_ch->tpc.dsp_atten = 110;
4991 /* scan_pwr_info->tpc.dsp_atten; */
4993 /*scan_pwr_info->tpc.tx_gain; */
4994 if (band == IEEE80211_BAND_5GHZ)
4995 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
4997 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
4998 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
5000 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
5004 IWL_DEBUG_SCAN("Scanning %d [%s %d]\n",
5006 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
5007 (scan_ch->type & 1) ?
5008 active_dwell : passive_dwell);
5014 IWL_DEBUG_SCAN("total channels to scan %d \n", added);
5018 static void iwl3945_init_hw_rates(struct iwl3945_priv *priv,
5019 struct ieee80211_rate *rates)
5023 for (i = 0; i < IWL_RATE_COUNT; i++) {
5024 rates[i].bitrate = iwl3945_rates[i].ieee * 5;
5025 rates[i].hw_value = i; /* Rate scaling will work on indexes */
5026 rates[i].hw_value_short = i;
5028 if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
5030 * If CCK != 1M then set short preamble rate flag.
5032 rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
5033 0 : IEEE80211_RATE_SHORT_PREAMBLE;
5039 * iwl3945_init_geos - Initialize mac80211's geo/channel info based from eeprom
5041 static int iwl3945_init_geos(struct iwl3945_priv *priv)
5043 struct iwl3945_channel_info *ch;
5044 struct ieee80211_supported_band *sband;
5045 struct ieee80211_channel *channels;
5046 struct ieee80211_channel *geo_ch;
5047 struct ieee80211_rate *rates;
5050 if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
5051 priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
5052 IWL_DEBUG_INFO("Geography modes already initialized.\n");
5053 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
5057 channels = kzalloc(sizeof(struct ieee80211_channel) *
5058 priv->channel_count, GFP_KERNEL);
5062 rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
5069 /* 5.2GHz channels start after the 2.4GHz channels */
5070 sband = &priv->bands[IEEE80211_BAND_5GHZ];
5071 sband->channels = &channels[ARRAY_SIZE(iwl3945_eeprom_band_1)];
5073 sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
5074 sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
5076 sband = &priv->bands[IEEE80211_BAND_2GHZ];
5077 sband->channels = channels;
5079 sband->bitrates = rates;
5080 sband->n_bitrates = IWL_RATE_COUNT;
5082 priv->ieee_channels = channels;
5083 priv->ieee_rates = rates;
5085 iwl3945_init_hw_rates(priv, rates);
5087 for (i = 0; i < priv->channel_count; i++) {
5088 ch = &priv->channel_info[i];
5090 /* FIXME: might be removed if scan is OK*/
5091 if (!is_channel_valid(ch))
5094 if (is_channel_a_band(ch))
5095 sband = &priv->bands[IEEE80211_BAND_5GHZ];
5097 sband = &priv->bands[IEEE80211_BAND_2GHZ];
5099 geo_ch = &sband->channels[sband->n_channels++];
5101 geo_ch->center_freq = ieee80211_channel_to_frequency(ch->channel);
5102 geo_ch->max_power = ch->max_power_avg;
5103 geo_ch->max_antenna_gain = 0xff;
5104 geo_ch->hw_value = ch->channel;
5106 if (is_channel_valid(ch)) {
5107 if (!(ch->flags & EEPROM_CHANNEL_IBSS))
5108 geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
5110 if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
5111 geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
5113 if (ch->flags & EEPROM_CHANNEL_RADAR)
5114 geo_ch->flags |= IEEE80211_CHAN_RADAR;
5116 if (ch->max_power_avg > priv->max_channel_txpower_limit)
5117 priv->max_channel_txpower_limit =
5120 geo_ch->flags |= IEEE80211_CHAN_DISABLED;
5123 /* Save flags for reg domain usage */
5124 geo_ch->orig_flags = geo_ch->flags;
5126 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0%X\n",
5127 ch->channel, geo_ch->center_freq,
5128 is_channel_a_band(ch) ? "5.2" : "2.4",
5129 geo_ch->flags & IEEE80211_CHAN_DISABLED ?
5130 "restricted" : "valid",
5134 if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
5135 priv->cfg->sku & IWL_SKU_A) {
5136 printk(KERN_INFO DRV_NAME
5137 ": Incorrectly detected BG card as ABG. Please send "
5138 "your PCI ID 0x%04X:0x%04X to maintainer.\n",
5139 priv->pci_dev->device, priv->pci_dev->subsystem_device);
5140 priv->cfg->sku &= ~IWL_SKU_A;
5143 printk(KERN_INFO DRV_NAME
5144 ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
5145 priv->bands[IEEE80211_BAND_2GHZ].n_channels,
5146 priv->bands[IEEE80211_BAND_5GHZ].n_channels);
5148 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
5149 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
5150 &priv->bands[IEEE80211_BAND_2GHZ];
5151 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
5152 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
5153 &priv->bands[IEEE80211_BAND_5GHZ];
5155 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
5161 * iwl3945_free_geos - undo allocations in iwl3945_init_geos
5163 static void iwl3945_free_geos(struct iwl3945_priv *priv)
5165 kfree(priv->ieee_channels);
5166 kfree(priv->ieee_rates);
5167 clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
5170 /******************************************************************************
5172 * uCode download functions
5174 ******************************************************************************/
5176 static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv)
5178 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
5179 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
5180 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
5181 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
5182 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
5183 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
5187 * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
5188 * looking at all data.
5190 static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len)
5197 IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
5199 rc = iwl3945_grab_nic_access(priv);
5203 iwl3945_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
5206 for (; len > 0; len -= sizeof(u32), image++) {
5207 /* read data comes through single port, auto-incr addr */
5208 /* NOTE: Use the debugless read so we don't flood kernel log
5209 * if IWL_DL_IO is set */
5210 val = _iwl3945_read_direct32(priv, HBUS_TARG_MEM_RDAT);
5211 if (val != le32_to_cpu(*image)) {
5212 IWL_ERROR("uCode INST section is invalid at "
5213 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5214 save_len - len, val, le32_to_cpu(*image));
5222 iwl3945_release_nic_access(priv);
5225 IWL_DEBUG_INFO("ucode image in INSTRUCTION memory is good\n");
5232 * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
5233 * using sample data 100 bytes apart. If these sample points are good,
5234 * it's a pretty good bet that everything between them is good, too.
5236 static int iwl3945_verify_inst_sparse(struct iwl3945_priv *priv, __le32 *image, u32 len)
5243 IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
5245 rc = iwl3945_grab_nic_access(priv);
5249 for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
5250 /* read data comes through single port, auto-incr addr */
5251 /* NOTE: Use the debugless read so we don't flood kernel log
5252 * if IWL_DL_IO is set */
5253 iwl3945_write_direct32(priv, HBUS_TARG_MEM_RADDR,
5254 i + RTC_INST_LOWER_BOUND);
5255 val = _iwl3945_read_direct32(priv, HBUS_TARG_MEM_RDAT);
5256 if (val != le32_to_cpu(*image)) {
5257 #if 0 /* Enable this if you want to see details */
5258 IWL_ERROR("uCode INST section is invalid at "
5259 "offset 0x%x, is 0x%x, s/b 0x%x\n",
5269 iwl3945_release_nic_access(priv);
5276 * iwl3945_verify_ucode - determine which instruction image is in SRAM,
5277 * and verify its contents
5279 static int iwl3945_verify_ucode(struct iwl3945_priv *priv)
5286 image = (__le32 *)priv->ucode_boot.v_addr;
5287 len = priv->ucode_boot.len;
5288 rc = iwl3945_verify_inst_sparse(priv, image, len);
5290 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
5294 /* Try initialize */
5295 image = (__le32 *)priv->ucode_init.v_addr;
5296 len = priv->ucode_init.len;
5297 rc = iwl3945_verify_inst_sparse(priv, image, len);
5299 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
5303 /* Try runtime/protocol */
5304 image = (__le32 *)priv->ucode_code.v_addr;
5305 len = priv->ucode_code.len;
5306 rc = iwl3945_verify_inst_sparse(priv, image, len);
5308 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
5312 IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
5314 /* Since nothing seems to match, show first several data entries in
5315 * instruction SRAM, so maybe visual inspection will give a clue.
5316 * Selection of bootstrap image (vs. other images) is arbitrary. */
5317 image = (__le32 *)priv->ucode_boot.v_addr;
5318 len = priv->ucode_boot.len;
5319 rc = iwl3945_verify_inst_full(priv, image, len);
5325 /* check contents of special bootstrap uCode SRAM */
5326 static int iwl3945_verify_bsm(struct iwl3945_priv *priv)
5328 __le32 *image = priv->ucode_boot.v_addr;
5329 u32 len = priv->ucode_boot.len;
5333 IWL_DEBUG_INFO("Begin verify bsm\n");
5335 /* verify BSM SRAM contents */
5336 val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG);
5337 for (reg = BSM_SRAM_LOWER_BOUND;
5338 reg < BSM_SRAM_LOWER_BOUND + len;
5339 reg += sizeof(u32), image ++) {
5340 val = iwl3945_read_prph(priv, reg);
5341 if (val != le32_to_cpu(*image)) {
5342 IWL_ERROR("BSM uCode verification failed at "
5343 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
5344 BSM_SRAM_LOWER_BOUND,
5345 reg - BSM_SRAM_LOWER_BOUND, len,
5346 val, le32_to_cpu(*image));
5351 IWL_DEBUG_INFO("BSM bootstrap uCode image OK\n");
5357 * iwl3945_load_bsm - Load bootstrap instructions
5361 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
5362 * in special SRAM that does not power down during RFKILL. When powering back
5363 * up after power-saving sleeps (or during initial uCode load), the BSM loads
5364 * the bootstrap program into the on-board processor, and starts it.
5366 * The bootstrap program loads (via DMA) instructions and data for a new
5367 * program from host DRAM locations indicated by the host driver in the
5368 * BSM_DRAM_* registers. Once the new program is loaded, it starts
5371 * When initializing the NIC, the host driver points the BSM to the
5372 * "initialize" uCode image. This uCode sets up some internal data, then
5373 * notifies host via "initialize alive" that it is complete.
5375 * The host then replaces the BSM_DRAM_* pointer values to point to the
5376 * normal runtime uCode instructions and a backup uCode data cache buffer
5377 * (filled initially with starting data values for the on-board processor),
5378 * then triggers the "initialize" uCode to load and launch the runtime uCode,
5379 * which begins normal operation.
5381 * When doing a power-save shutdown, runtime uCode saves data SRAM into
5382 * the backup data cache in DRAM before SRAM is powered down.
5384 * When powering back up, the BSM loads the bootstrap program. This reloads
5385 * the runtime uCode instructions and the backup data cache into SRAM,
5386 * and re-launches the runtime uCode from where it left off.
5388 static int iwl3945_load_bsm(struct iwl3945_priv *priv)
5390 __le32 *image = priv->ucode_boot.v_addr;
5391 u32 len = priv->ucode_boot.len;
5401 IWL_DEBUG_INFO("Begin load bsm\n");
5403 /* make sure bootstrap program is no larger than BSM's SRAM size */
5404 if (len > IWL_MAX_BSM_SIZE)
5407 /* Tell bootstrap uCode where to find the "Initialize" uCode
5408 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
5409 * NOTE: iwl3945_initialize_alive_start() will replace these values,
5410 * after the "initialize" uCode has run, to point to
5411 * runtime/protocol instructions and backup data cache. */
5412 pinst = priv->ucode_init.p_addr;
5413 pdata = priv->ucode_init_data.p_addr;
5414 inst_len = priv->ucode_init.len;
5415 data_len = priv->ucode_init_data.len;
5417 rc = iwl3945_grab_nic_access(priv);
5421 iwl3945_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
5422 iwl3945_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
5423 iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
5424 iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
5426 /* Fill BSM memory with bootstrap instructions */
5427 for (reg_offset = BSM_SRAM_LOWER_BOUND;
5428 reg_offset < BSM_SRAM_LOWER_BOUND + len;
5429 reg_offset += sizeof(u32), image++)
5430 _iwl3945_write_prph(priv, reg_offset,
5431 le32_to_cpu(*image));
5433 rc = iwl3945_verify_bsm(priv);
5435 iwl3945_release_nic_access(priv);
5439 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
5440 iwl3945_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
5441 iwl3945_write_prph(priv, BSM_WR_MEM_DST_REG,
5442 RTC_INST_LOWER_BOUND);
5443 iwl3945_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
5445 /* Load bootstrap code into instruction SRAM now,
5446 * to prepare to load "initialize" uCode */
5447 iwl3945_write_prph(priv, BSM_WR_CTRL_REG,
5448 BSM_WR_CTRL_REG_BIT_START);
5450 /* Wait for load of bootstrap uCode to finish */
5451 for (i = 0; i < 100; i++) {
5452 done = iwl3945_read_prph(priv, BSM_WR_CTRL_REG);
5453 if (!(done & BSM_WR_CTRL_REG_BIT_START))
5458 IWL_DEBUG_INFO("BSM write complete, poll %d iterations\n", i);
5460 IWL_ERROR("BSM write did not complete!\n");
5464 /* Enable future boot loads whenever power management unit triggers it
5465 * (e.g. when powering back up after power-save shutdown) */
5466 iwl3945_write_prph(priv, BSM_WR_CTRL_REG,
5467 BSM_WR_CTRL_REG_BIT_START_EN);
5469 iwl3945_release_nic_access(priv);
5474 static void iwl3945_nic_start(struct iwl3945_priv *priv)
5476 /* Remove all resets to allow NIC to operate */
5477 iwl3945_write32(priv, CSR_RESET, 0);
5481 * iwl3945_read_ucode - Read uCode images from disk file.
5483 * Copy into buffers for card to fetch via bus-mastering
5485 static int iwl3945_read_ucode(struct iwl3945_priv *priv)
5487 struct iwl3945_ucode *ucode;
5489 const struct firmware *ucode_raw;
5490 /* firmware file name contains uCode/driver compatibility version */
5491 const char *name = priv->cfg->fw_name;
5494 u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
5496 /* Ask kernel firmware_class module to get the boot firmware off disk.
5497 * request_firmware() is synchronous, file is in memory on return. */
5498 ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
5500 IWL_ERROR("%s firmware file req failed: Reason %d\n",
5505 IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
5506 name, ucode_raw->size);
5508 /* Make sure that we got at least our header! */
5509 if (ucode_raw->size < sizeof(*ucode)) {
5510 IWL_ERROR("File size way too small!\n");
5515 /* Data from ucode file: header followed by uCode images */
5516 ucode = (void *)ucode_raw->data;
5518 ver = le32_to_cpu(ucode->ver);
5519 inst_size = le32_to_cpu(ucode->inst_size);
5520 data_size = le32_to_cpu(ucode->data_size);
5521 init_size = le32_to_cpu(ucode->init_size);
5522 init_data_size = le32_to_cpu(ucode->init_data_size);
5523 boot_size = le32_to_cpu(ucode->boot_size);
5525 IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
5526 IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
5527 IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", data_size);
5528 IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", init_size);
5529 IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", init_data_size);
5530 IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", boot_size);
5532 /* Verify size of file vs. image size info in file's header */
5533 if (ucode_raw->size < sizeof(*ucode) +
5534 inst_size + data_size + init_size +
5535 init_data_size + boot_size) {
5537 IWL_DEBUG_INFO("uCode file size %d too small\n",
5538 (int)ucode_raw->size);
5543 /* Verify that uCode images will fit in card's SRAM */
5544 if (inst_size > IWL_MAX_INST_SIZE) {
5545 IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
5551 if (data_size > IWL_MAX_DATA_SIZE) {
5552 IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
5557 if (init_size > IWL_MAX_INST_SIZE) {
5558 IWL_DEBUG_INFO("uCode init instr len %d too large to fit in\n",
5563 if (init_data_size > IWL_MAX_DATA_SIZE) {
5564 IWL_DEBUG_INFO("uCode init data len %d too large to fit in\n",
5569 if (boot_size > IWL_MAX_BSM_SIZE) {
5570 IWL_DEBUG_INFO("uCode boot instr len %d too large to fit in\n",
5576 /* Allocate ucode buffers for card's bus-master loading ... */
5578 /* Runtime instructions and 2 copies of data:
5579 * 1) unmodified from disk
5580 * 2) backup cache for save/restore during power-downs */
5581 priv->ucode_code.len = inst_size;
5582 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
5584 priv->ucode_data.len = data_size;
5585 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
5587 priv->ucode_data_backup.len = data_size;
5588 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
5590 if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
5591 !priv->ucode_data_backup.v_addr)
5594 /* Initialization instructions and data */
5595 if (init_size && init_data_size) {
5596 priv->ucode_init.len = init_size;
5597 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
5599 priv->ucode_init_data.len = init_data_size;
5600 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
5602 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
5606 /* Bootstrap (instructions only, no data) */
5608 priv->ucode_boot.len = boot_size;
5609 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
5611 if (!priv->ucode_boot.v_addr)
5615 /* Copy images into buffers for card's bus-master reads ... */
5617 /* Runtime instructions (first block of data in file) */
5618 src = &ucode->data[0];
5619 len = priv->ucode_code.len;
5620 IWL_DEBUG_INFO("Copying (but not loading) uCode instr len %Zd\n", len);
5621 memcpy(priv->ucode_code.v_addr, src, len);
5622 IWL_DEBUG_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
5623 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
5625 /* Runtime data (2nd block)
5626 * NOTE: Copy into backup buffer will be done in iwl3945_up() */
5627 src = &ucode->data[inst_size];
5628 len = priv->ucode_data.len;
5629 IWL_DEBUG_INFO("Copying (but not loading) uCode data len %Zd\n", len);
5630 memcpy(priv->ucode_data.v_addr, src, len);
5631 memcpy(priv->ucode_data_backup.v_addr, src, len);
5633 /* Initialization instructions (3rd block) */
5635 src = &ucode->data[inst_size + data_size];
5636 len = priv->ucode_init.len;
5637 IWL_DEBUG_INFO("Copying (but not loading) init instr len %Zd\n",
5639 memcpy(priv->ucode_init.v_addr, src, len);
5642 /* Initialization data (4th block) */
5643 if (init_data_size) {
5644 src = &ucode->data[inst_size + data_size + init_size];
5645 len = priv->ucode_init_data.len;
5646 IWL_DEBUG_INFO("Copying (but not loading) init data len %d\n",
5648 memcpy(priv->ucode_init_data.v_addr, src, len);
5651 /* Bootstrap instructions (5th block) */
5652 src = &ucode->data[inst_size + data_size + init_size + init_data_size];
5653 len = priv->ucode_boot.len;
5654 IWL_DEBUG_INFO("Copying (but not loading) boot instr len %d\n",
5656 memcpy(priv->ucode_boot.v_addr, src, len);
5658 /* We have our copies now, allow OS release its copies */
5659 release_firmware(ucode_raw);
5663 IWL_ERROR("failed to allocate pci memory\n");
5665 iwl3945_dealloc_ucode_pci(priv);
5668 release_firmware(ucode_raw);
5676 * iwl3945_set_ucode_ptrs - Set uCode address location
5678 * Tell initialization uCode where to find runtime uCode.
5680 * BSM registers initially contain pointers to initialization uCode.
5681 * We need to replace them to load runtime uCode inst and data,
5682 * and to save runtime data when powering down.
5684 static int iwl3945_set_ucode_ptrs(struct iwl3945_priv *priv)
5689 unsigned long flags;
5691 /* bits 31:0 for 3945 */
5692 pinst = priv->ucode_code.p_addr;
5693 pdata = priv->ucode_data_backup.p_addr;
5695 spin_lock_irqsave(&priv->lock, flags);
5696 rc = iwl3945_grab_nic_access(priv);
5698 spin_unlock_irqrestore(&priv->lock, flags);
5702 /* Tell bootstrap uCode where to find image to load */
5703 iwl3945_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
5704 iwl3945_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
5705 iwl3945_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
5706 priv->ucode_data.len);
5708 /* Inst bytecount must be last to set up, bit 31 signals uCode
5709 * that all new ptr/size info is in place */
5710 iwl3945_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
5711 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
5713 iwl3945_release_nic_access(priv);
5715 spin_unlock_irqrestore(&priv->lock, flags);
5717 IWL_DEBUG_INFO("Runtime uCode pointers are set.\n");
5723 * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
5725 * Called after REPLY_ALIVE notification received from "initialize" uCode.
5727 * Tell "initialize" uCode to go ahead and load the runtime uCode.
5729 static void iwl3945_init_alive_start(struct iwl3945_priv *priv)
5731 /* Check alive response for "valid" sign from uCode */
5732 if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
5733 /* We had an error bringing up the hardware, so take it
5734 * all the way back down so we can try again */
5735 IWL_DEBUG_INFO("Initialize Alive failed.\n");
5739 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
5740 * This is a paranoid check, because we would not have gotten the
5741 * "initialize" alive if code weren't properly loaded. */
5742 if (iwl3945_verify_ucode(priv)) {
5743 /* Runtime instruction load was bad;
5744 * take it all the way back down so we can try again */
5745 IWL_DEBUG_INFO("Bad \"initialize\" uCode load.\n");
5749 /* Send pointers to protocol/runtime uCode image ... init code will
5750 * load and launch runtime uCode, which will send us another "Alive"
5752 IWL_DEBUG_INFO("Initialization Alive received.\n");
5753 if (iwl3945_set_ucode_ptrs(priv)) {
5754 /* Runtime instruction load won't happen;
5755 * take it all the way back down so we can try again */
5756 IWL_DEBUG_INFO("Couldn't set up uCode pointers.\n");
5762 queue_work(priv->workqueue, &priv->restart);
5767 * iwl3945_alive_start - called after REPLY_ALIVE notification received
5768 * from protocol/runtime uCode (initialization uCode's
5769 * Alive gets handled by iwl3945_init_alive_start()).
5771 static void iwl3945_alive_start(struct iwl3945_priv *priv)
5774 int thermal_spin = 0;
5777 IWL_DEBUG_INFO("Runtime Alive received.\n");
5779 if (priv->card_alive.is_valid != UCODE_VALID_OK) {
5780 /* We had an error bringing up the hardware, so take it
5781 * all the way back down so we can try again */
5782 IWL_DEBUG_INFO("Alive failed.\n");
5786 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
5787 * This is a paranoid check, because we would not have gotten the
5788 * "runtime" alive if code weren't properly loaded. */
5789 if (iwl3945_verify_ucode(priv)) {
5790 /* Runtime instruction load was bad;
5791 * take it all the way back down so we can try again */
5792 IWL_DEBUG_INFO("Bad runtime uCode load.\n");
5796 iwl3945_clear_stations_table(priv);
5798 rc = iwl3945_grab_nic_access(priv);
5800 IWL_WARNING("Can not read rfkill status from adapter\n");
5804 rfkill = iwl3945_read_prph(priv, APMG_RFKILL_REG);
5805 IWL_DEBUG_INFO("RFKILL status: 0x%x\n", rfkill);
5806 iwl3945_release_nic_access(priv);
5809 clear_bit(STATUS_RF_KILL_HW, &priv->status);
5810 /* if rfkill is not on, then wait for thermal
5811 * sensor in adapter to kick in */
5812 while (iwl3945_hw_get_temperature(priv) == 0) {
5818 IWL_DEBUG_INFO("Thermal calibration took %dus\n",
5821 set_bit(STATUS_RF_KILL_HW, &priv->status);
5823 /* After the ALIVE response, we can send commands to 3945 uCode */
5824 set_bit(STATUS_ALIVE, &priv->status);
5826 /* Clear out the uCode error bit if it is set */
5827 clear_bit(STATUS_FW_ERROR, &priv->status);
5829 if (iwl3945_is_rfkill(priv))
5832 ieee80211_wake_queues(priv->hw);
5834 priv->active_rate = priv->rates_mask;
5835 priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
5837 iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(priv->power_mode));
5839 if (iwl3945_is_associated(priv)) {
5840 struct iwl3945_rxon_cmd *active_rxon =
5841 (struct iwl3945_rxon_cmd *)(&priv->active_rxon);
5843 memcpy(&priv->staging_rxon, &priv->active_rxon,
5844 sizeof(priv->staging_rxon));
5845 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
5847 /* Initialize our rx_config data */
5848 iwl3945_connection_init_rx_config(priv);
5849 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
5852 /* Configure Bluetooth device coexistence support */
5853 iwl3945_send_bt_config(priv);
5855 /* Configure the adapter for unassociated operation */
5856 iwl3945_commit_rxon(priv);
5858 iwl3945_reg_txpower_periodic(priv);
5860 iwl3945_led_register(priv);
5862 IWL_DEBUG_INFO("ALIVE processing complete.\n");
5863 set_bit(STATUS_READY, &priv->status);
5864 wake_up_interruptible(&priv->wait_command_queue);
5866 if (priv->error_recovering)
5867 iwl3945_error_recovery(priv);
5869 ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
5873 queue_work(priv->workqueue, &priv->restart);
5876 static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv);
5878 static void __iwl3945_down(struct iwl3945_priv *priv)
5880 unsigned long flags;
5881 int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
5882 struct ieee80211_conf *conf = NULL;
5884 IWL_DEBUG_INFO(DRV_NAME " is going down\n");
5886 conf = ieee80211_get_hw_conf(priv->hw);
5889 set_bit(STATUS_EXIT_PENDING, &priv->status);
5891 iwl3945_led_unregister(priv);
5892 iwl3945_clear_stations_table(priv);
5894 /* Unblock any waiting calls */
5895 wake_up_interruptible_all(&priv->wait_command_queue);
5897 /* Wipe out the EXIT_PENDING status bit if we are not actually
5898 * exiting the module */
5900 clear_bit(STATUS_EXIT_PENDING, &priv->status);
5902 /* stop and reset the on-board processor */
5903 iwl3945_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
5905 /* tell the device to stop sending interrupts */
5906 spin_lock_irqsave(&priv->lock, flags);
5907 iwl3945_disable_interrupts(priv);
5908 spin_unlock_irqrestore(&priv->lock, flags);
5909 iwl_synchronize_irq(priv);
5911 if (priv->mac80211_registered)
5912 ieee80211_stop_queues(priv->hw);
5914 /* If we have not previously called iwl3945_init() then
5915 * clear all bits but the RF Kill and SUSPEND bits and return */
5916 if (!iwl3945_is_init(priv)) {
5917 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
5919 test_bit(STATUS_RF_KILL_SW, &priv->status) <<
5921 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
5922 STATUS_GEO_CONFIGURED |
5923 test_bit(STATUS_IN_SUSPEND, &priv->status) <<
5928 /* ...otherwise clear out all the status bits but the RF Kill and
5929 * SUSPEND bits and continue taking the NIC down. */
5930 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
5932 test_bit(STATUS_RF_KILL_SW, &priv->status) <<
5934 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
5935 STATUS_GEO_CONFIGURED |
5936 test_bit(STATUS_IN_SUSPEND, &priv->status) <<
5938 test_bit(STATUS_FW_ERROR, &priv->status) <<
5941 spin_lock_irqsave(&priv->lock, flags);
5942 iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
5943 spin_unlock_irqrestore(&priv->lock, flags);
5945 iwl3945_hw_txq_ctx_stop(priv);
5946 iwl3945_hw_rxq_stop(priv);
5948 spin_lock_irqsave(&priv->lock, flags);
5949 if (!iwl3945_grab_nic_access(priv)) {
5950 iwl3945_write_prph(priv, APMG_CLK_DIS_REG,
5951 APMG_CLK_VAL_DMA_CLK_RQT);
5952 iwl3945_release_nic_access(priv);
5954 spin_unlock_irqrestore(&priv->lock, flags);
5958 iwl3945_hw_nic_stop_master(priv);
5959 iwl3945_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
5960 iwl3945_hw_nic_reset(priv);
5963 memset(&priv->card_alive, 0, sizeof(struct iwl3945_alive_resp));
5965 if (priv->ibss_beacon)
5966 dev_kfree_skb(priv->ibss_beacon);
5967 priv->ibss_beacon = NULL;
5969 /* clear out any free frames */
5970 iwl3945_clear_free_frames(priv);
5973 static void iwl3945_down(struct iwl3945_priv *priv)
5975 mutex_lock(&priv->mutex);
5976 __iwl3945_down(priv);
5977 mutex_unlock(&priv->mutex);
5979 iwl3945_cancel_deferred_work(priv);
5982 #define MAX_HW_RESTARTS 5
5984 static int __iwl3945_up(struct iwl3945_priv *priv)
5988 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
5989 IWL_WARNING("Exit pending; will not bring the NIC up\n");
5993 if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
5994 IWL_WARNING("Radio disabled by SW RF kill (module "
5999 if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
6000 IWL_ERROR("ucode not available for device bringup\n");
6004 /* If platform's RF_KILL switch is NOT set to KILL */
6005 if (iwl3945_read32(priv, CSR_GP_CNTRL) &
6006 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
6007 clear_bit(STATUS_RF_KILL_HW, &priv->status);
6009 set_bit(STATUS_RF_KILL_HW, &priv->status);
6010 if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
6011 IWL_WARNING("Radio disabled by HW RF Kill switch\n");
6016 iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
6018 rc = iwl3945_hw_nic_init(priv);
6020 IWL_ERROR("Unable to int nic\n");
6024 /* make sure rfkill handshake bits are cleared */
6025 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6026 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR,
6027 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
6029 /* clear (again), then enable host interrupts */
6030 iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
6031 iwl3945_enable_interrupts(priv);
6033 /* really make sure rfkill handshake bits are cleared */
6034 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6035 iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
6037 /* Copy original ucode data image from disk into backup cache.
6038 * This will be used to initialize the on-board processor's
6039 * data SRAM for a clean start when the runtime program first loads. */
6040 memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
6041 priv->ucode_data.len);
6043 /* We return success when we resume from suspend and rf_kill is on. */
6044 if (test_bit(STATUS_RF_KILL_HW, &priv->status))
6047 for (i = 0; i < MAX_HW_RESTARTS; i++) {
6049 iwl3945_clear_stations_table(priv);
6051 /* load bootstrap state machine,
6052 * load bootstrap program into processor's memory,
6053 * prepare to load the "initialize" uCode */
6054 rc = iwl3945_load_bsm(priv);
6057 IWL_ERROR("Unable to set up bootstrap uCode: %d\n", rc);
6061 /* start card; "initialize" will load runtime ucode */
6062 iwl3945_nic_start(priv);
6064 IWL_DEBUG_INFO(DRV_NAME " is coming up\n");
6069 set_bit(STATUS_EXIT_PENDING, &priv->status);
6070 __iwl3945_down(priv);
6072 /* tried to restart and config the device for as long as our
6073 * patience could withstand */
6074 IWL_ERROR("Unable to initialize device after %d attempts.\n", i);
6079 /*****************************************************************************
6081 * Workqueue callbacks
6083 *****************************************************************************/
6085 static void iwl3945_bg_init_alive_start(struct work_struct *data)
6087 struct iwl3945_priv *priv =
6088 container_of(data, struct iwl3945_priv, init_alive_start.work);
6090 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6093 mutex_lock(&priv->mutex);
6094 iwl3945_init_alive_start(priv);
6095 mutex_unlock(&priv->mutex);
6098 static void iwl3945_bg_alive_start(struct work_struct *data)
6100 struct iwl3945_priv *priv =
6101 container_of(data, struct iwl3945_priv, alive_start.work);
6103 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6106 mutex_lock(&priv->mutex);
6107 iwl3945_alive_start(priv);
6108 mutex_unlock(&priv->mutex);
6111 static void iwl3945_bg_rf_kill(struct work_struct *work)
6113 struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, rf_kill);
6115 wake_up_interruptible(&priv->wait_command_queue);
6117 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6120 mutex_lock(&priv->mutex);
6122 if (!iwl3945_is_rfkill(priv)) {
6123 IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL,
6124 "HW and/or SW RF Kill no longer active, restarting "
6126 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
6127 queue_work(priv->workqueue, &priv->restart);
6130 if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
6131 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
6132 "disabled by SW switch\n");
6134 IWL_WARNING("Radio Frequency Kill Switch is On:\n"
6135 "Kill switch must be turned off for "
6136 "wireless networking to work.\n");
6138 mutex_unlock(&priv->mutex);
6141 static void iwl3945_bg_set_monitor(struct work_struct *work)
6143 struct iwl3945_priv *priv = container_of(work,
6144 struct iwl3945_priv, set_monitor);
6146 IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n");
6148 mutex_lock(&priv->mutex);
6150 if (!iwl3945_is_ready(priv))
6151 IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n");
6153 if (iwl3945_set_mode(priv, IEEE80211_IF_TYPE_MNTR) != 0)
6154 IWL_ERROR("iwl3945_set_mode() failed\n");
6156 mutex_unlock(&priv->mutex);
6159 #define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
6161 static void iwl3945_bg_scan_check(struct work_struct *data)
6163 struct iwl3945_priv *priv =
6164 container_of(data, struct iwl3945_priv, scan_check.work);
6166 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6169 mutex_lock(&priv->mutex);
6170 if (test_bit(STATUS_SCANNING, &priv->status) ||
6171 test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
6172 IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN,
6173 "Scan completion watchdog resetting adapter (%dms)\n",
6174 jiffies_to_msecs(IWL_SCAN_CHECK_WATCHDOG));
6176 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
6177 iwl3945_send_scan_abort(priv);
6179 mutex_unlock(&priv->mutex);
6182 static void iwl3945_bg_request_scan(struct work_struct *data)
6184 struct iwl3945_priv *priv =
6185 container_of(data, struct iwl3945_priv, request_scan);
6186 struct iwl3945_host_cmd cmd = {
6187 .id = REPLY_SCAN_CMD,
6188 .len = sizeof(struct iwl3945_scan_cmd),
6189 .meta.flags = CMD_SIZE_HUGE,
6192 struct iwl3945_scan_cmd *scan;
6193 struct ieee80211_conf *conf = NULL;
6195 enum ieee80211_band band;
6197 conf = ieee80211_get_hw_conf(priv->hw);
6199 mutex_lock(&priv->mutex);
6201 if (!iwl3945_is_ready(priv)) {
6202 IWL_WARNING("request scan called when driver not ready.\n");
6206 /* Make sure the scan wasn't cancelled before this queued work
6207 * was given the chance to run... */
6208 if (!test_bit(STATUS_SCANNING, &priv->status))
6211 /* This should never be called or scheduled if there is currently
6212 * a scan active in the hardware. */
6213 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
6214 IWL_DEBUG_INFO("Multiple concurrent scan requests in parallel. "
6215 "Ignoring second request.\n");
6220 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
6221 IWL_DEBUG_SCAN("Aborting scan due to device shutdown\n");
6225 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
6226 IWL_DEBUG_HC("Scan request while abort pending. Queuing.\n");
6230 if (iwl3945_is_rfkill(priv)) {
6231 IWL_DEBUG_HC("Aborting scan due to RF Kill activation\n");
6235 if (!test_bit(STATUS_READY, &priv->status)) {
6236 IWL_DEBUG_HC("Scan request while uninitialized. Queuing.\n");
6240 if (!priv->scan_bands) {
6241 IWL_DEBUG_HC("Aborting scan due to no requested bands\n");
6246 priv->scan = kmalloc(sizeof(struct iwl3945_scan_cmd) +
6247 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
6254 memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
6256 scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
6257 scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
6259 if (iwl3945_is_associated(priv)) {
6262 u32 suspend_time = 100;
6263 u32 scan_suspend_time = 100;
6264 unsigned long flags;
6266 IWL_DEBUG_INFO("Scanning while associated...\n");
6268 spin_lock_irqsave(&priv->lock, flags);
6269 interval = priv->beacon_int;
6270 spin_unlock_irqrestore(&priv->lock, flags);
6272 scan->suspend_time = 0;
6273 scan->max_out_time = cpu_to_le32(200 * 1024);
6275 interval = suspend_time;
6277 * suspend time format:
6278 * 0-19: beacon interval in usec (time before exec.)
6280 * 24-31: number of beacons (suspend between channels)
6283 extra = (suspend_time / interval) << 24;
6284 scan_suspend_time = 0xFF0FFFFF &
6285 (extra | ((suspend_time % interval) * 1024));
6287 scan->suspend_time = cpu_to_le32(scan_suspend_time);
6288 IWL_DEBUG_SCAN("suspend_time 0x%X beacon interval %d\n",
6289 scan_suspend_time, interval);
6292 /* We should add the ability for user to lock to PASSIVE ONLY */
6293 if (priv->one_direct_scan) {
6295 ("Kicking off one direct scan for '%s'\n",
6296 iwl3945_escape_essid(priv->direct_ssid,
6297 priv->direct_ssid_len));
6298 scan->direct_scan[0].id = WLAN_EID_SSID;
6299 scan->direct_scan[0].len = priv->direct_ssid_len;
6300 memcpy(scan->direct_scan[0].ssid,
6301 priv->direct_ssid, priv->direct_ssid_len);
6303 } else if (!iwl3945_is_associated(priv) && priv->essid_len) {
6305 ("Kicking off one direct scan for '%s' when not associated\n",
6306 iwl3945_escape_essid(priv->essid, priv->essid_len));
6307 scan->direct_scan[0].id = WLAN_EID_SSID;
6308 scan->direct_scan[0].len = priv->essid_len;
6309 memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
6312 IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
6316 /* We don't build a direct scan probe request; the uCode will do
6317 * that based on the direct_mask added to each channel entry */
6318 scan->tx_cmd.len = cpu_to_le16(
6319 iwl3945_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
6320 IWL_MAX_SCAN_SIZE - sizeof(*scan), 0));
6321 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
6322 scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id;
6323 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
6325 /* flags + rate selection */
6327 if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
6328 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
6329 scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
6330 scan->good_CRC_th = 0;
6331 band = IEEE80211_BAND_2GHZ;
6332 } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
6333 scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
6334 scan->good_CRC_th = IWL_GOOD_CRC_TH;
6335 band = IEEE80211_BAND_5GHZ;
6337 IWL_WARNING("Invalid scan band count\n");
6341 /* select Rx antennas */
6342 scan->flags |= iwl3945_get_antenna_flags(priv);
6344 if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
6345 scan->filter_flags = RXON_FILTER_PROMISC_MSK;
6348 scan->channel_count =
6349 iwl3945_get_channels_for_scan(
6350 priv, band, 1, /* active */
6352 (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
6354 scan->channel_count =
6355 iwl3945_get_channels_for_scan(
6356 priv, band, 0, /* passive */
6358 (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
6360 cmd.len += le16_to_cpu(scan->tx_cmd.len) +
6361 scan->channel_count * sizeof(struct iwl3945_scan_channel);
6363 scan->len = cpu_to_le16(cmd.len);
6365 set_bit(STATUS_SCAN_HW, &priv->status);
6366 rc = iwl3945_send_cmd_sync(priv, &cmd);
6370 queue_delayed_work(priv->workqueue, &priv->scan_check,
6371 IWL_SCAN_CHECK_WATCHDOG);
6373 mutex_unlock(&priv->mutex);
6377 /* inform mac80211 scan aborted */
6378 queue_work(priv->workqueue, &priv->scan_completed);
6379 mutex_unlock(&priv->mutex);
6382 static void iwl3945_bg_up(struct work_struct *data)
6384 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, up);
6386 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6389 mutex_lock(&priv->mutex);
6391 mutex_unlock(&priv->mutex);
6394 static void iwl3945_bg_restart(struct work_struct *data)
6396 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv, restart);
6398 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6402 queue_work(priv->workqueue, &priv->up);
6405 static void iwl3945_bg_rx_replenish(struct work_struct *data)
6407 struct iwl3945_priv *priv =
6408 container_of(data, struct iwl3945_priv, rx_replenish);
6410 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6413 mutex_lock(&priv->mutex);
6414 iwl3945_rx_replenish(priv);
6415 mutex_unlock(&priv->mutex);
6418 #define IWL_DELAY_NEXT_SCAN (HZ*2)
6420 static void iwl3945_bg_post_associate(struct work_struct *data)
6422 struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv,
6423 post_associate.work);
6426 struct ieee80211_conf *conf = NULL;
6427 DECLARE_MAC_BUF(mac);
6429 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
6430 IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__);
6435 IWL_DEBUG_ASSOC("Associated as %d to: %s\n",
6437 print_mac(mac, priv->active_rxon.bssid_addr));
6439 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6442 mutex_lock(&priv->mutex);
6444 if (!priv->vif || !priv->is_open) {
6445 mutex_unlock(&priv->mutex);
6448 iwl3945_scan_cancel_timeout(priv, 200);
6450 conf = ieee80211_get_hw_conf(priv->hw);
6452 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6453 iwl3945_commit_rxon(priv);
6455 memset(&priv->rxon_timing, 0, sizeof(struct iwl3945_rxon_time_cmd));
6456 iwl3945_setup_rxon_timing(priv);
6457 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON_TIMING,
6458 sizeof(priv->rxon_timing), &priv->rxon_timing);
6460 IWL_WARNING("REPLY_RXON_TIMING failed - "
6461 "Attempting to continue.\n");
6463 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
6465 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
6467 IWL_DEBUG_ASSOC("assoc id %d beacon interval %d\n",
6468 priv->assoc_id, priv->beacon_int);
6470 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
6471 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
6473 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
6475 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
6476 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
6477 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
6479 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
6481 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
6482 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
6486 iwl3945_commit_rxon(priv);
6488 switch (priv->iw_mode) {
6489 case IEEE80211_IF_TYPE_STA:
6490 iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
6493 case IEEE80211_IF_TYPE_IBSS:
6495 /* clear out the station table */
6496 iwl3945_clear_stations_table(priv);
6498 iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
6499 iwl3945_add_station(priv, priv->bssid, 0, 0);
6500 iwl3945_sync_sta(priv, IWL_STA_ID,
6501 (priv->band == IEEE80211_BAND_5GHZ) ?
6502 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP,
6504 iwl3945_rate_scale_init(priv->hw, IWL_STA_ID);
6505 iwl3945_send_beacon_cmd(priv);
6510 IWL_ERROR("%s Should not be called in %d mode\n",
6511 __FUNCTION__, priv->iw_mode);
6515 iwl3945_sequence_reset(priv);
6517 iwl3945_activate_qos(priv, 0);
6519 /* we have just associated, don't start scan too early */
6520 priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
6521 mutex_unlock(&priv->mutex);
6524 static void iwl3945_bg_abort_scan(struct work_struct *work)
6526 struct iwl3945_priv *priv = container_of(work, struct iwl3945_priv, abort_scan);
6528 if (!iwl3945_is_ready(priv))
6531 mutex_lock(&priv->mutex);
6533 set_bit(STATUS_SCAN_ABORTING, &priv->status);
6534 iwl3945_send_scan_abort(priv);
6536 mutex_unlock(&priv->mutex);
6539 static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
6541 static void iwl3945_bg_scan_completed(struct work_struct *work)
6543 struct iwl3945_priv *priv =
6544 container_of(work, struct iwl3945_priv, scan_completed);
6546 IWL_DEBUG(IWL_DL_INFO | IWL_DL_SCAN, "SCAN complete scan\n");
6548 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6551 if (test_bit(STATUS_CONF_PENDING, &priv->status))
6552 iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
6554 ieee80211_scan_completed(priv->hw);
6556 /* Since setting the TXPOWER may have been deferred while
6557 * performing the scan, fire one off */
6558 mutex_lock(&priv->mutex);
6559 iwl3945_hw_reg_send_txpower(priv);
6560 mutex_unlock(&priv->mutex);
6563 /*****************************************************************************
6565 * mac80211 entry point functions
6567 *****************************************************************************/
6569 #define UCODE_READY_TIMEOUT (2 * HZ)
6571 static int iwl3945_mac_start(struct ieee80211_hw *hw)
6573 struct iwl3945_priv *priv = hw->priv;
6576 IWL_DEBUG_MAC80211("enter\n");
6578 if (pci_enable_device(priv->pci_dev)) {
6579 IWL_ERROR("Fail to pci_enable_device\n");
6582 pci_restore_state(priv->pci_dev);
6583 pci_enable_msi(priv->pci_dev);
6585 ret = request_irq(priv->pci_dev->irq, iwl3945_isr, IRQF_SHARED,
6588 IWL_ERROR("Error allocating IRQ %d\n", priv->pci_dev->irq);
6589 goto out_disable_msi;
6592 /* we should be verifying the device is ready to be opened */
6593 mutex_lock(&priv->mutex);
6595 memset(&priv->staging_rxon, 0, sizeof(struct iwl3945_rxon_cmd));
6596 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
6597 * ucode filename and max sizes are card-specific. */
6599 if (!priv->ucode_code.len) {
6600 ret = iwl3945_read_ucode(priv);
6602 IWL_ERROR("Could not read microcode: %d\n", ret);
6603 mutex_unlock(&priv->mutex);
6604 goto out_release_irq;
6608 ret = __iwl3945_up(priv);
6610 mutex_unlock(&priv->mutex);
6613 goto out_release_irq;
6615 IWL_DEBUG_INFO("Start UP work.\n");
6617 if (test_bit(STATUS_IN_SUSPEND, &priv->status))
6620 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
6621 * mac80211 will not be run successfully. */
6622 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
6623 test_bit(STATUS_READY, &priv->status),
6624 UCODE_READY_TIMEOUT);
6626 if (!test_bit(STATUS_READY, &priv->status)) {
6627 IWL_ERROR("Wait for START_ALIVE timeout after %dms.\n",
6628 jiffies_to_msecs(UCODE_READY_TIMEOUT));
6630 goto out_release_irq;
6635 IWL_DEBUG_MAC80211("leave\n");
6639 free_irq(priv->pci_dev->irq, priv);
6641 pci_disable_msi(priv->pci_dev);
6642 pci_disable_device(priv->pci_dev);
6644 IWL_DEBUG_MAC80211("leave - failed\n");
6648 static void iwl3945_mac_stop(struct ieee80211_hw *hw)
6650 struct iwl3945_priv *priv = hw->priv;
6652 IWL_DEBUG_MAC80211("enter\n");
6654 if (!priv->is_open) {
6655 IWL_DEBUG_MAC80211("leave - skip\n");
6661 if (iwl3945_is_ready_rf(priv)) {
6662 /* stop mac, cancel any scan request and clear
6663 * RXON_FILTER_ASSOC_MSK BIT
6665 mutex_lock(&priv->mutex);
6666 iwl3945_scan_cancel_timeout(priv, 100);
6667 cancel_delayed_work(&priv->post_associate);
6668 mutex_unlock(&priv->mutex);
6673 flush_workqueue(priv->workqueue);
6674 free_irq(priv->pci_dev->irq, priv);
6675 pci_disable_msi(priv->pci_dev);
6676 pci_save_state(priv->pci_dev);
6677 pci_disable_device(priv->pci_dev);
6679 IWL_DEBUG_MAC80211("leave\n");
6682 static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
6684 struct iwl3945_priv *priv = hw->priv;
6686 IWL_DEBUG_MAC80211("enter\n");
6688 if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
6689 IWL_DEBUG_MAC80211("leave - monitor\n");
6693 IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
6694 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
6696 if (iwl3945_tx_skb(priv, skb))
6697 dev_kfree_skb_any(skb);
6699 IWL_DEBUG_MAC80211("leave\n");
6703 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
6704 struct ieee80211_if_init_conf *conf)
6706 struct iwl3945_priv *priv = hw->priv;
6707 unsigned long flags;
6708 DECLARE_MAC_BUF(mac);
6710 IWL_DEBUG_MAC80211("enter: type %d\n", conf->type);
6713 IWL_DEBUG_MAC80211("leave - vif != NULL\n");
6717 spin_lock_irqsave(&priv->lock, flags);
6718 priv->vif = conf->vif;
6720 spin_unlock_irqrestore(&priv->lock, flags);
6722 mutex_lock(&priv->mutex);
6724 if (conf->mac_addr) {
6725 IWL_DEBUG_MAC80211("Set: %s\n", print_mac(mac, conf->mac_addr));
6726 memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
6729 if (iwl3945_is_ready(priv))
6730 iwl3945_set_mode(priv, conf->type);
6732 mutex_unlock(&priv->mutex);
6734 IWL_DEBUG_MAC80211("leave\n");
6739 * iwl3945_mac_config - mac80211 config callback
6741 * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
6742 * be set inappropriately and the driver currently sets the hardware up to
6743 * use it whenever needed.
6745 static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
6747 struct iwl3945_priv *priv = hw->priv;
6748 const struct iwl3945_channel_info *ch_info;
6749 unsigned long flags;
6752 mutex_lock(&priv->mutex);
6753 IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
6755 priv->add_radiotap = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
6757 if (!iwl3945_is_ready(priv)) {
6758 IWL_DEBUG_MAC80211("leave - not ready\n");
6763 if (unlikely(!iwl3945_param_disable_hw_scan &&
6764 test_bit(STATUS_SCANNING, &priv->status))) {
6765 IWL_DEBUG_MAC80211("leave - scanning\n");
6766 set_bit(STATUS_CONF_PENDING, &priv->status);
6767 mutex_unlock(&priv->mutex);
6771 spin_lock_irqsave(&priv->lock, flags);
6773 ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
6774 conf->channel->hw_value);
6775 if (!is_channel_valid(ch_info)) {
6776 IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
6777 conf->channel->hw_value, conf->channel->band);
6778 IWL_DEBUG_MAC80211("leave - invalid channel\n");
6779 spin_unlock_irqrestore(&priv->lock, flags);
6784 iwl3945_set_rxon_channel(priv, conf->channel->band, conf->channel->hw_value);
6786 iwl3945_set_flags_for_phymode(priv, conf->channel->band);
6788 /* The list of supported rates and rate mask can be different
6789 * for each phymode; since the phymode may have changed, reset
6790 * the rate mask to what mac80211 lists */
6791 iwl3945_set_rate(priv);
6793 spin_unlock_irqrestore(&priv->lock, flags);
6795 #ifdef IEEE80211_CONF_CHANNEL_SWITCH
6796 if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
6797 iwl3945_hw_channel_switch(priv, conf->channel);
6802 iwl3945_radio_kill_sw(priv, !conf->radio_enabled);
6804 if (!conf->radio_enabled) {
6805 IWL_DEBUG_MAC80211("leave - radio disabled\n");
6809 if (iwl3945_is_rfkill(priv)) {
6810 IWL_DEBUG_MAC80211("leave - RF kill\n");
6815 iwl3945_set_rate(priv);
6817 if (memcmp(&priv->active_rxon,
6818 &priv->staging_rxon, sizeof(priv->staging_rxon)))
6819 iwl3945_commit_rxon(priv);
6821 IWL_DEBUG_INFO("No re-sending same RXON configuration.\n");
6823 IWL_DEBUG_MAC80211("leave\n");
6826 clear_bit(STATUS_CONF_PENDING, &priv->status);
6827 mutex_unlock(&priv->mutex);
6831 static void iwl3945_config_ap(struct iwl3945_priv *priv)
6835 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
6838 /* The following should be done only at AP bring up */
6839 if ((priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) == 0) {
6841 /* RXON - unassoc (to set timing command) */
6842 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6843 iwl3945_commit_rxon(priv);
6846 memset(&priv->rxon_timing, 0, sizeof(struct iwl3945_rxon_time_cmd));
6847 iwl3945_setup_rxon_timing(priv);
6848 rc = iwl3945_send_cmd_pdu(priv, REPLY_RXON_TIMING,
6849 sizeof(priv->rxon_timing), &priv->rxon_timing);
6851 IWL_WARNING("REPLY_RXON_TIMING failed - "
6852 "Attempting to continue.\n");
6854 /* FIXME: what should be the assoc_id for AP? */
6855 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
6856 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
6857 priv->staging_rxon.flags |=
6858 RXON_FLG_SHORT_PREAMBLE_MSK;
6860 priv->staging_rxon.flags &=
6861 ~RXON_FLG_SHORT_PREAMBLE_MSK;
6863 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
6864 if (priv->assoc_capability &
6865 WLAN_CAPABILITY_SHORT_SLOT_TIME)
6866 priv->staging_rxon.flags |=
6867 RXON_FLG_SHORT_SLOT_MSK;
6869 priv->staging_rxon.flags &=
6870 ~RXON_FLG_SHORT_SLOT_MSK;
6872 if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
6873 priv->staging_rxon.flags &=
6874 ~RXON_FLG_SHORT_SLOT_MSK;
6876 /* restore RXON assoc */
6877 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
6878 iwl3945_commit_rxon(priv);
6879 iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
6881 iwl3945_send_beacon_cmd(priv);
6883 /* FIXME - we need to add code here to detect a totally new
6884 * configuration, reset the AP, unassoc, rxon timing, assoc,
6885 * clear sta table, add BCAST sta... */
6888 static int iwl3945_mac_config_interface(struct ieee80211_hw *hw,
6889 struct ieee80211_vif *vif,
6890 struct ieee80211_if_conf *conf)
6892 struct iwl3945_priv *priv = hw->priv;
6893 DECLARE_MAC_BUF(mac);
6894 unsigned long flags;
6900 if (priv->vif != vif) {
6901 IWL_DEBUG_MAC80211("leave - priv->vif != vif\n");
6905 /* XXX: this MUST use conf->mac_addr */
6907 if ((priv->iw_mode == IEEE80211_IF_TYPE_AP) &&
6908 (!conf->beacon || !conf->ssid_len)) {
6910 ("Leaving in AP mode because HostAPD is not ready.\n");
6914 if (!iwl3945_is_alive(priv))
6917 mutex_lock(&priv->mutex);
6920 IWL_DEBUG_MAC80211("bssid: %s\n",
6921 print_mac(mac, conf->bssid));
6924 * very dubious code was here; the probe filtering flag is never set:
6926 if (unlikely(test_bit(STATUS_SCANNING, &priv->status)) &&
6927 !(priv->hw->flags & IEEE80211_HW_NO_PROBE_FILTERING)) {
6930 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
6932 conf->bssid = priv->mac_addr;
6933 memcpy(priv->bssid, priv->mac_addr, ETH_ALEN);
6934 IWL_DEBUG_MAC80211("bssid was set to: %s\n",
6935 print_mac(mac, conf->bssid));
6937 if (priv->ibss_beacon)
6938 dev_kfree_skb(priv->ibss_beacon);
6940 priv->ibss_beacon = conf->beacon;
6943 if (iwl3945_is_rfkill(priv))
6946 if (conf->bssid && !is_zero_ether_addr(conf->bssid) &&
6947 !is_multicast_ether_addr(conf->bssid)) {
6948 /* If there is currently a HW scan going on in the background
6949 * then we need to cancel it else the RXON below will fail. */
6950 if (iwl3945_scan_cancel_timeout(priv, 100)) {
6951 IWL_WARNING("Aborted scan still in progress "
6953 IWL_DEBUG_MAC80211("leaving - scan abort failed.\n");
6954 mutex_unlock(&priv->mutex);
6957 memcpy(priv->staging_rxon.bssid_addr, conf->bssid, ETH_ALEN);
6959 /* TODO: Audit driver for usage of these members and see
6960 * if mac80211 deprecates them (priv->bssid looks like it
6961 * shouldn't be there, but I haven't scanned the IBSS code
6962 * to verify) - jpk */
6963 memcpy(priv->bssid, conf->bssid, ETH_ALEN);
6965 if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
6966 iwl3945_config_ap(priv);
6968 rc = iwl3945_commit_rxon(priv);
6969 if ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && rc)
6970 iwl3945_add_station(priv,
6971 priv->active_rxon.bssid_addr, 1, 0);
6975 iwl3945_scan_cancel_timeout(priv, 100);
6976 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
6977 iwl3945_commit_rxon(priv);
6981 spin_lock_irqsave(&priv->lock, flags);
6982 if (!conf->ssid_len)
6983 memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
6985 memcpy(priv->essid, conf->ssid, conf->ssid_len);
6987 priv->essid_len = conf->ssid_len;
6988 spin_unlock_irqrestore(&priv->lock, flags);
6990 IWL_DEBUG_MAC80211("leave\n");
6991 mutex_unlock(&priv->mutex);
6996 static void iwl3945_configure_filter(struct ieee80211_hw *hw,
6997 unsigned int changed_flags,
6998 unsigned int *total_flags,
6999 int mc_count, struct dev_addr_list *mc_list)
7003 * see also iwl3945_connection_init_rx_config
7005 struct iwl3945_priv *priv = hw->priv;
7007 if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
7008 if (*total_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
7009 IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
7010 IEEE80211_IF_TYPE_MNTR,
7011 changed_flags, *total_flags);
7012 /* queue work 'cuz mac80211 is holding a lock which
7013 * prevents us from issuing (synchronous) f/w cmds */
7014 queue_work(priv->workqueue, &priv->set_monitor);
7015 new_flags &= FIF_PROMISC_IN_BSS |
7020 *total_flags = new_flags;
7023 static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
7024 struct ieee80211_if_init_conf *conf)
7026 struct iwl3945_priv *priv = hw->priv;
7028 IWL_DEBUG_MAC80211("enter\n");
7030 mutex_lock(&priv->mutex);
7032 if (iwl3945_is_ready_rf(priv)) {
7033 iwl3945_scan_cancel_timeout(priv, 100);
7034 cancel_delayed_work(&priv->post_associate);
7035 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
7036 iwl3945_commit_rxon(priv);
7038 if (priv->vif == conf->vif) {
7040 memset(priv->bssid, 0, ETH_ALEN);
7041 memset(priv->essid, 0, IW_ESSID_MAX_SIZE);
7042 priv->essid_len = 0;
7044 mutex_unlock(&priv->mutex);
7046 IWL_DEBUG_MAC80211("leave\n");
7049 static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
7052 unsigned long flags;
7053 struct iwl3945_priv *priv = hw->priv;
7055 IWL_DEBUG_MAC80211("enter\n");
7057 mutex_lock(&priv->mutex);
7058 spin_lock_irqsave(&priv->lock, flags);
7060 if (!iwl3945_is_ready_rf(priv)) {
7062 IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
7066 if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { /* APs don't scan */
7068 IWL_ERROR("ERROR: APs don't scan\n");
7072 /* we don't schedule scan within next_scan_jiffies period */
7073 if (priv->next_scan_jiffies &&
7074 time_after(priv->next_scan_jiffies, jiffies)) {
7078 /* if we just finished scan ask for delay for a broadcast scan */
7079 if ((len == 0) && priv->last_scan_jiffies &&
7080 time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN,
7086 IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
7087 iwl3945_escape_essid(ssid, len), (int)len);
7089 priv->one_direct_scan = 1;
7090 priv->direct_ssid_len = (u8)
7091 min((u8) len, (u8) IW_ESSID_MAX_SIZE);
7092 memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
7094 priv->one_direct_scan = 0;
7096 rc = iwl3945_scan_initiate(priv);
7098 IWL_DEBUG_MAC80211("leave\n");
7101 spin_unlock_irqrestore(&priv->lock, flags);
7102 mutex_unlock(&priv->mutex);
7107 static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
7108 const u8 *local_addr, const u8 *addr,
7109 struct ieee80211_key_conf *key)
7111 struct iwl3945_priv *priv = hw->priv;
7115 IWL_DEBUG_MAC80211("enter\n");
7117 if (!iwl3945_param_hwcrypto) {
7118 IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
7122 if (is_zero_ether_addr(addr))
7123 /* only support pairwise keys */
7126 sta_id = iwl3945_hw_find_station(priv, addr);
7127 if (sta_id == IWL_INVALID_STATION) {
7128 DECLARE_MAC_BUF(mac);
7130 IWL_DEBUG_MAC80211("leave - %s not in station map.\n",
7131 print_mac(mac, addr));
7135 mutex_lock(&priv->mutex);
7137 iwl3945_scan_cancel_timeout(priv, 100);
7141 rc = iwl3945_update_sta_key_info(priv, key, sta_id);
7143 iwl3945_set_rxon_hwcrypto(priv, 1);
7144 iwl3945_commit_rxon(priv);
7145 key->hw_key_idx = sta_id;
7146 IWL_DEBUG_MAC80211("set_key success, using hwcrypto\n");
7147 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
7151 rc = iwl3945_clear_sta_key_info(priv, sta_id);
7153 iwl3945_set_rxon_hwcrypto(priv, 0);
7154 iwl3945_commit_rxon(priv);
7155 IWL_DEBUG_MAC80211("disable hwcrypto key\n");
7162 IWL_DEBUG_MAC80211("leave\n");
7163 mutex_unlock(&priv->mutex);
7168 static int iwl3945_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
7169 const struct ieee80211_tx_queue_params *params)
7171 struct iwl3945_priv *priv = hw->priv;
7172 unsigned long flags;
7175 IWL_DEBUG_MAC80211("enter\n");
7177 if (!iwl3945_is_ready_rf(priv)) {
7178 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7182 if (queue >= AC_NUM) {
7183 IWL_DEBUG_MAC80211("leave - queue >= AC_NUM %d\n", queue);
7187 if (!priv->qos_data.qos_enable) {
7188 priv->qos_data.qos_active = 0;
7189 IWL_DEBUG_MAC80211("leave - qos not enabled\n");
7192 q = AC_NUM - 1 - queue;
7194 spin_lock_irqsave(&priv->lock, flags);
7196 priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min);
7197 priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max);
7198 priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
7199 priv->qos_data.def_qos_parm.ac[q].edca_txop =
7200 cpu_to_le16((params->txop * 32));
7202 priv->qos_data.def_qos_parm.ac[q].reserved1 = 0;
7203 priv->qos_data.qos_active = 1;
7205 spin_unlock_irqrestore(&priv->lock, flags);
7207 mutex_lock(&priv->mutex);
7208 if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
7209 iwl3945_activate_qos(priv, 1);
7210 else if (priv->assoc_id && iwl3945_is_associated(priv))
7211 iwl3945_activate_qos(priv, 0);
7213 mutex_unlock(&priv->mutex);
7215 IWL_DEBUG_MAC80211("leave\n");
7219 static int iwl3945_mac_get_tx_stats(struct ieee80211_hw *hw,
7220 struct ieee80211_tx_queue_stats *stats)
7222 struct iwl3945_priv *priv = hw->priv;
7224 struct iwl3945_tx_queue *txq;
7225 struct iwl3945_queue *q;
7226 unsigned long flags;
7228 IWL_DEBUG_MAC80211("enter\n");
7230 if (!iwl3945_is_ready_rf(priv)) {
7231 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7235 spin_lock_irqsave(&priv->lock, flags);
7237 for (i = 0; i < AC_NUM; i++) {
7238 txq = &priv->txq[i];
7240 avail = iwl3945_queue_space(q);
7242 stats[i].len = q->n_window - avail;
7243 stats[i].limit = q->n_window - q->high_mark;
7244 stats[i].count = q->n_window;
7247 spin_unlock_irqrestore(&priv->lock, flags);
7249 IWL_DEBUG_MAC80211("leave\n");
7254 static int iwl3945_mac_get_stats(struct ieee80211_hw *hw,
7255 struct ieee80211_low_level_stats *stats)
7257 IWL_DEBUG_MAC80211("enter\n");
7258 IWL_DEBUG_MAC80211("leave\n");
7263 static u64 iwl3945_mac_get_tsf(struct ieee80211_hw *hw)
7265 IWL_DEBUG_MAC80211("enter\n");
7266 IWL_DEBUG_MAC80211("leave\n");
7271 static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw)
7273 struct iwl3945_priv *priv = hw->priv;
7274 unsigned long flags;
7276 mutex_lock(&priv->mutex);
7277 IWL_DEBUG_MAC80211("enter\n");
7279 iwl3945_reset_qos(priv);
7281 cancel_delayed_work(&priv->post_associate);
7283 spin_lock_irqsave(&priv->lock, flags);
7285 priv->assoc_capability = 0;
7286 priv->call_post_assoc_from_beacon = 0;
7288 /* new association get rid of ibss beacon skb */
7289 if (priv->ibss_beacon)
7290 dev_kfree_skb(priv->ibss_beacon);
7292 priv->ibss_beacon = NULL;
7294 priv->beacon_int = priv->hw->conf.beacon_int;
7295 priv->timestamp1 = 0;
7296 priv->timestamp0 = 0;
7297 if ((priv->iw_mode == IEEE80211_IF_TYPE_STA))
7298 priv->beacon_int = 0;
7300 spin_unlock_irqrestore(&priv->lock, flags);
7302 if (!iwl3945_is_ready_rf(priv)) {
7303 IWL_DEBUG_MAC80211("leave - not ready\n");
7304 mutex_unlock(&priv->mutex);
7308 /* we are restarting association process
7309 * clear RXON_FILTER_ASSOC_MSK bit
7311 if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
7312 iwl3945_scan_cancel_timeout(priv, 100);
7313 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
7314 iwl3945_commit_rxon(priv);
7317 /* Per mac80211.h: This is only used in IBSS mode... */
7318 if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
7320 IWL_DEBUG_MAC80211("leave - not in IBSS\n");
7321 mutex_unlock(&priv->mutex);
7325 iwl3945_set_rate(priv);
7327 mutex_unlock(&priv->mutex);
7329 IWL_DEBUG_MAC80211("leave\n");
7333 static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
7335 struct iwl3945_priv *priv = hw->priv;
7336 unsigned long flags;
7338 mutex_lock(&priv->mutex);
7339 IWL_DEBUG_MAC80211("enter\n");
7341 if (!iwl3945_is_ready_rf(priv)) {
7342 IWL_DEBUG_MAC80211("leave - RF not ready\n");
7343 mutex_unlock(&priv->mutex);
7347 if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
7348 IWL_DEBUG_MAC80211("leave - not IBSS\n");
7349 mutex_unlock(&priv->mutex);
7353 spin_lock_irqsave(&priv->lock, flags);
7355 if (priv->ibss_beacon)
7356 dev_kfree_skb(priv->ibss_beacon);
7358 priv->ibss_beacon = skb;
7362 IWL_DEBUG_MAC80211("leave\n");
7363 spin_unlock_irqrestore(&priv->lock, flags);
7365 iwl3945_reset_qos(priv);
7367 queue_work(priv->workqueue, &priv->post_associate.work);
7369 mutex_unlock(&priv->mutex);
7374 /*****************************************************************************
7378 *****************************************************************************/
7380 #ifdef CONFIG_IWL3945_DEBUG
7383 * The following adds a new attribute to the sysfs representation
7384 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
7385 * used for controlling the debug level.
7387 * See the level definitions in iwl for details.
7390 static ssize_t show_debug_level(struct device_driver *d, char *buf)
7392 return sprintf(buf, "0x%08X\n", iwl3945_debug_level);
7394 static ssize_t store_debug_level(struct device_driver *d,
7395 const char *buf, size_t count)
7397 char *p = (char *)buf;
7400 val = simple_strtoul(p, &p, 0);
7402 printk(KERN_INFO DRV_NAME
7403 ": %s is not in hex or decimal form.\n", buf);
7405 iwl3945_debug_level = val;
7407 return strnlen(buf, count);
7410 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO,
7411 show_debug_level, store_debug_level);
7413 #endif /* CONFIG_IWL3945_DEBUG */
7415 static ssize_t show_rf_kill(struct device *d,
7416 struct device_attribute *attr, char *buf)
7419 * 0 - RF kill not enabled
7420 * 1 - SW based RF kill active (sysfs)
7421 * 2 - HW based RF kill active
7422 * 3 - Both HW and SW based RF kill active
7424 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7425 int val = (test_bit(STATUS_RF_KILL_SW, &priv->status) ? 0x1 : 0x0) |
7426 (test_bit(STATUS_RF_KILL_HW, &priv->status) ? 0x2 : 0x0);
7428 return sprintf(buf, "%i\n", val);
7431 static ssize_t store_rf_kill(struct device *d,
7432 struct device_attribute *attr,
7433 const char *buf, size_t count)
7435 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7437 mutex_lock(&priv->mutex);
7438 iwl3945_radio_kill_sw(priv, buf[0] == '1');
7439 mutex_unlock(&priv->mutex);
7444 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
7446 static ssize_t show_temperature(struct device *d,
7447 struct device_attribute *attr, char *buf)
7449 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7451 if (!iwl3945_is_alive(priv))
7454 return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
7457 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
7459 static ssize_t show_rs_window(struct device *d,
7460 struct device_attribute *attr,
7463 struct iwl3945_priv *priv = d->driver_data;
7464 return iwl3945_fill_rs_info(priv->hw, buf, IWL_AP_ID);
7466 static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL);
7468 static ssize_t show_tx_power(struct device *d,
7469 struct device_attribute *attr, char *buf)
7471 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7472 return sprintf(buf, "%d\n", priv->user_txpower_limit);
7475 static ssize_t store_tx_power(struct device *d,
7476 struct device_attribute *attr,
7477 const char *buf, size_t count)
7479 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7480 char *p = (char *)buf;
7483 val = simple_strtoul(p, &p, 10);
7485 printk(KERN_INFO DRV_NAME
7486 ": %s is not in decimal form.\n", buf);
7488 iwl3945_hw_reg_set_txpower(priv, val);
7493 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
7495 static ssize_t show_flags(struct device *d,
7496 struct device_attribute *attr, char *buf)
7498 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7500 return sprintf(buf, "0x%04X\n", priv->active_rxon.flags);
7503 static ssize_t store_flags(struct device *d,
7504 struct device_attribute *attr,
7505 const char *buf, size_t count)
7507 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7508 u32 flags = simple_strtoul(buf, NULL, 0);
7510 mutex_lock(&priv->mutex);
7511 if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
7512 /* Cancel any currently running scans... */
7513 if (iwl3945_scan_cancel_timeout(priv, 100))
7514 IWL_WARNING("Could not cancel scan.\n");
7516 IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
7518 priv->staging_rxon.flags = cpu_to_le32(flags);
7519 iwl3945_commit_rxon(priv);
7522 mutex_unlock(&priv->mutex);
7527 static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
7529 static ssize_t show_filter_flags(struct device *d,
7530 struct device_attribute *attr, char *buf)
7532 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7534 return sprintf(buf, "0x%04X\n",
7535 le32_to_cpu(priv->active_rxon.filter_flags));
7538 static ssize_t store_filter_flags(struct device *d,
7539 struct device_attribute *attr,
7540 const char *buf, size_t count)
7542 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7543 u32 filter_flags = simple_strtoul(buf, NULL, 0);
7545 mutex_lock(&priv->mutex);
7546 if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
7547 /* Cancel any currently running scans... */
7548 if (iwl3945_scan_cancel_timeout(priv, 100))
7549 IWL_WARNING("Could not cancel scan.\n");
7551 IWL_DEBUG_INFO("Committing rxon.filter_flags = "
7552 "0x%04X\n", filter_flags);
7553 priv->staging_rxon.filter_flags =
7554 cpu_to_le32(filter_flags);
7555 iwl3945_commit_rxon(priv);
7558 mutex_unlock(&priv->mutex);
7563 static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
7564 store_filter_flags);
7566 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7568 static ssize_t show_measurement(struct device *d,
7569 struct device_attribute *attr, char *buf)
7571 struct iwl3945_priv *priv = dev_get_drvdata(d);
7572 struct iwl3945_spectrum_notification measure_report;
7573 u32 size = sizeof(measure_report), len = 0, ofs = 0;
7574 u8 *data = (u8 *) & measure_report;
7575 unsigned long flags;
7577 spin_lock_irqsave(&priv->lock, flags);
7578 if (!(priv->measurement_status & MEASUREMENT_READY)) {
7579 spin_unlock_irqrestore(&priv->lock, flags);
7582 memcpy(&measure_report, &priv->measure_report, size);
7583 priv->measurement_status = 0;
7584 spin_unlock_irqrestore(&priv->lock, flags);
7586 while (size && (PAGE_SIZE - len)) {
7587 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
7588 PAGE_SIZE - len, 1);
7590 if (PAGE_SIZE - len)
7594 size -= min(size, 16U);
7600 static ssize_t store_measurement(struct device *d,
7601 struct device_attribute *attr,
7602 const char *buf, size_t count)
7604 struct iwl3945_priv *priv = dev_get_drvdata(d);
7605 struct ieee80211_measurement_params params = {
7606 .channel = le16_to_cpu(priv->active_rxon.channel),
7607 .start_time = cpu_to_le64(priv->last_tsf),
7608 .duration = cpu_to_le16(1),
7610 u8 type = IWL_MEASURE_BASIC;
7616 strncpy(buffer, buf, min(sizeof(buffer), count));
7617 channel = simple_strtoul(p, NULL, 0);
7619 params.channel = channel;
7622 while (*p && *p != ' ')
7625 type = simple_strtoul(p + 1, NULL, 0);
7628 IWL_DEBUG_INFO("Invoking measurement of type %d on "
7629 "channel %d (for '%s')\n", type, params.channel, buf);
7630 iwl3945_get_measurement(priv, ¶ms, type);
7635 static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
7636 show_measurement, store_measurement);
7637 #endif /* CONFIG_IWL3945_SPECTRUM_MEASUREMENT */
7639 static ssize_t store_retry_rate(struct device *d,
7640 struct device_attribute *attr,
7641 const char *buf, size_t count)
7643 struct iwl3945_priv *priv = dev_get_drvdata(d);
7645 priv->retry_rate = simple_strtoul(buf, NULL, 0);
7646 if (priv->retry_rate <= 0)
7647 priv->retry_rate = 1;
7652 static ssize_t show_retry_rate(struct device *d,
7653 struct device_attribute *attr, char *buf)
7655 struct iwl3945_priv *priv = dev_get_drvdata(d);
7656 return sprintf(buf, "%d", priv->retry_rate);
7659 static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
7662 static ssize_t store_power_level(struct device *d,
7663 struct device_attribute *attr,
7664 const char *buf, size_t count)
7666 struct iwl3945_priv *priv = dev_get_drvdata(d);
7670 mode = simple_strtoul(buf, NULL, 0);
7671 mutex_lock(&priv->mutex);
7673 if (!iwl3945_is_ready(priv)) {
7678 if ((mode < 1) || (mode > IWL_POWER_LIMIT) || (mode == IWL_POWER_AC))
7679 mode = IWL_POWER_AC;
7681 mode |= IWL_POWER_ENABLED;
7683 if (mode != priv->power_mode) {
7684 rc = iwl3945_send_power_mode(priv, IWL_POWER_LEVEL(mode));
7686 IWL_DEBUG_MAC80211("failed setting power mode.\n");
7689 priv->power_mode = mode;
7695 mutex_unlock(&priv->mutex);
7699 #define MAX_WX_STRING 80
7701 /* Values are in microsecond */
7702 static const s32 timeout_duration[] = {
7709 static const s32 period_duration[] = {
7717 static ssize_t show_power_level(struct device *d,
7718 struct device_attribute *attr, char *buf)
7720 struct iwl3945_priv *priv = dev_get_drvdata(d);
7721 int level = IWL_POWER_LEVEL(priv->power_mode);
7724 p += sprintf(p, "%d ", level);
7726 case IWL_POWER_MODE_CAM:
7728 p += sprintf(p, "(AC)");
7730 case IWL_POWER_BATTERY:
7731 p += sprintf(p, "(BATTERY)");
7735 "(Timeout %dms, Period %dms)",
7736 timeout_duration[level - 1] / 1000,
7737 period_duration[level - 1] / 1000);
7740 if (!(priv->power_mode & IWL_POWER_ENABLED))
7741 p += sprintf(p, " OFF\n");
7743 p += sprintf(p, " \n");
7745 return (p - buf + 1);
7749 static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level,
7752 static ssize_t show_channels(struct device *d,
7753 struct device_attribute *attr, char *buf)
7755 /* all this shit doesn't belong into sysfs anyway */
7759 static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
7761 static ssize_t show_statistics(struct device *d,
7762 struct device_attribute *attr, char *buf)
7764 struct iwl3945_priv *priv = dev_get_drvdata(d);
7765 u32 size = sizeof(struct iwl3945_notif_statistics);
7766 u32 len = 0, ofs = 0;
7767 u8 *data = (u8 *) & priv->statistics;
7770 if (!iwl3945_is_alive(priv))
7773 mutex_lock(&priv->mutex);
7774 rc = iwl3945_send_statistics_request(priv);
7775 mutex_unlock(&priv->mutex);
7779 "Error sending statistics request: 0x%08X\n", rc);
7783 while (size && (PAGE_SIZE - len)) {
7784 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
7785 PAGE_SIZE - len, 1);
7787 if (PAGE_SIZE - len)
7791 size -= min(size, 16U);
7797 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
7799 static ssize_t show_antenna(struct device *d,
7800 struct device_attribute *attr, char *buf)
7802 struct iwl3945_priv *priv = dev_get_drvdata(d);
7804 if (!iwl3945_is_alive(priv))
7807 return sprintf(buf, "%d\n", priv->antenna);
7810 static ssize_t store_antenna(struct device *d,
7811 struct device_attribute *attr,
7812 const char *buf, size_t count)
7815 struct iwl3945_priv *priv = dev_get_drvdata(d);
7820 if (sscanf(buf, "%1i", &ant) != 1) {
7821 IWL_DEBUG_INFO("not in hex or decimal form.\n");
7825 if ((ant >= 0) && (ant <= 2)) {
7826 IWL_DEBUG_INFO("Setting antenna select to %d.\n", ant);
7827 priv->antenna = (enum iwl3945_antenna)ant;
7829 IWL_DEBUG_INFO("Bad antenna select value %d.\n", ant);
7835 static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
7837 static ssize_t show_status(struct device *d,
7838 struct device_attribute *attr, char *buf)
7840 struct iwl3945_priv *priv = (struct iwl3945_priv *)d->driver_data;
7841 if (!iwl3945_is_alive(priv))
7843 return sprintf(buf, "0x%08x\n", (int)priv->status);
7846 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
7848 static ssize_t dump_error_log(struct device *d,
7849 struct device_attribute *attr,
7850 const char *buf, size_t count)
7852 char *p = (char *)buf;
7855 iwl3945_dump_nic_error_log((struct iwl3945_priv *)d->driver_data);
7857 return strnlen(buf, count);
7860 static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
7862 static ssize_t dump_event_log(struct device *d,
7863 struct device_attribute *attr,
7864 const char *buf, size_t count)
7866 char *p = (char *)buf;
7869 iwl3945_dump_nic_event_log((struct iwl3945_priv *)d->driver_data);
7871 return strnlen(buf, count);
7874 static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
7876 /*****************************************************************************
7878 * driver setup and teardown
7880 *****************************************************************************/
7882 static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv)
7884 priv->workqueue = create_workqueue(DRV_NAME);
7886 init_waitqueue_head(&priv->wait_command_queue);
7888 INIT_WORK(&priv->up, iwl3945_bg_up);
7889 INIT_WORK(&priv->restart, iwl3945_bg_restart);
7890 INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
7891 INIT_WORK(&priv->scan_completed, iwl3945_bg_scan_completed);
7892 INIT_WORK(&priv->request_scan, iwl3945_bg_request_scan);
7893 INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
7894 INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill);
7895 INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
7896 INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor);
7897 INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate);
7898 INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
7899 INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
7900 INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
7902 iwl3945_hw_setup_deferred_work(priv);
7904 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
7905 iwl3945_irq_tasklet, (unsigned long)priv);
7908 static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv)
7910 iwl3945_hw_cancel_deferred_work(priv);
7912 cancel_delayed_work_sync(&priv->init_alive_start);
7913 cancel_delayed_work(&priv->scan_check);
7914 cancel_delayed_work(&priv->alive_start);
7915 cancel_delayed_work(&priv->post_associate);
7916 cancel_work_sync(&priv->beacon_update);
7919 static struct attribute *iwl3945_sysfs_entries[] = {
7920 &dev_attr_antenna.attr,
7921 &dev_attr_channels.attr,
7922 &dev_attr_dump_errors.attr,
7923 &dev_attr_dump_events.attr,
7924 &dev_attr_flags.attr,
7925 &dev_attr_filter_flags.attr,
7926 #ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
7927 &dev_attr_measurement.attr,
7929 &dev_attr_power_level.attr,
7930 &dev_attr_retry_rate.attr,
7931 &dev_attr_rf_kill.attr,
7932 &dev_attr_rs_window.attr,
7933 &dev_attr_statistics.attr,
7934 &dev_attr_status.attr,
7935 &dev_attr_temperature.attr,
7936 &dev_attr_tx_power.attr,
7941 static struct attribute_group iwl3945_attribute_group = {
7942 .name = NULL, /* put in device directory */
7943 .attrs = iwl3945_sysfs_entries,
7946 static struct ieee80211_ops iwl3945_hw_ops = {
7947 .tx = iwl3945_mac_tx,
7948 .start = iwl3945_mac_start,
7949 .stop = iwl3945_mac_stop,
7950 .add_interface = iwl3945_mac_add_interface,
7951 .remove_interface = iwl3945_mac_remove_interface,
7952 .config = iwl3945_mac_config,
7953 .config_interface = iwl3945_mac_config_interface,
7954 .configure_filter = iwl3945_configure_filter,
7955 .set_key = iwl3945_mac_set_key,
7956 .get_stats = iwl3945_mac_get_stats,
7957 .get_tx_stats = iwl3945_mac_get_tx_stats,
7958 .conf_tx = iwl3945_mac_conf_tx,
7959 .get_tsf = iwl3945_mac_get_tsf,
7960 .reset_tsf = iwl3945_mac_reset_tsf,
7961 .beacon_update = iwl3945_mac_beacon_update,
7962 .hw_scan = iwl3945_mac_hw_scan
7965 static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
7968 struct iwl3945_priv *priv;
7969 struct ieee80211_hw *hw;
7970 struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data);
7972 unsigned long flags;
7973 DECLARE_MAC_BUF(mac);
7975 /* Disabling hardware scan means that mac80211 will perform scans
7976 * "the hard way", rather than using device's scan. */
7977 if (iwl3945_param_disable_hw_scan) {
7978 IWL_DEBUG_INFO("Disabling hw_scan\n");
7979 iwl3945_hw_ops.hw_scan = NULL;
7982 if ((iwl3945_param_queues_num > IWL39_MAX_NUM_QUEUES) ||
7983 (iwl3945_param_queues_num < IWL_MIN_NUM_QUEUES)) {
7984 IWL_ERROR("invalid queues_num, should be between %d and %d\n",
7985 IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
7990 /* mac80211 allocates memory for this device instance, including
7991 * space for this driver's private structure */
7992 hw = ieee80211_alloc_hw(sizeof(struct iwl3945_priv), &iwl3945_hw_ops);
7994 IWL_ERROR("Can not allocate network device\n");
7998 SET_IEEE80211_DEV(hw, &pdev->dev);
8000 hw->rate_control_algorithm = "iwl-3945-rs";
8002 IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
8006 priv->pci_dev = pdev;
8009 /* Select antenna (may be helpful if only one antenna is connected) */
8010 priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna;
8011 #ifdef CONFIG_IWL3945_DEBUG
8012 iwl3945_debug_level = iwl3945_param_debug;
8013 atomic_set(&priv->restrict_refcnt, 0);
8015 priv->retry_rate = 1;
8017 priv->ibss_beacon = NULL;
8019 /* Tell mac80211 our characteristics */
8020 hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
8021 IEEE80211_HW_SIGNAL_DBM |
8022 IEEE80211_HW_NOISE_DBM;
8024 /* 4 EDCA QOS priorities */
8027 spin_lock_init(&priv->lock);
8028 spin_lock_init(&priv->power_data.lock);
8029 spin_lock_init(&priv->sta_lock);
8030 spin_lock_init(&priv->hcmd_lock);
8032 for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++)
8033 INIT_LIST_HEAD(&priv->ibss_mac_hash[i]);
8035 INIT_LIST_HEAD(&priv->free_frames);
8037 mutex_init(&priv->mutex);
8038 if (pci_enable_device(pdev)) {
8040 goto out_ieee80211_free_hw;
8043 pci_set_master(pdev);
8045 /* Clear the driver's (not device's) station table */
8046 iwl3945_clear_stations_table(priv);
8048 priv->data_retry_limit = -1;
8049 priv->ieee_channels = NULL;
8050 priv->ieee_rates = NULL;
8051 priv->band = IEEE80211_BAND_2GHZ;
8053 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
8055 err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
8057 printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n");
8058 goto out_pci_disable_device;
8061 pci_set_drvdata(pdev, priv);
8062 err = pci_request_regions(pdev, DRV_NAME);
8064 goto out_pci_disable_device;
8066 /* We disable the RETRY_TIMEOUT register (0x41) to keep
8067 * PCI Tx retries from interfering with C3 CPU state */
8068 pci_write_config_byte(pdev, 0x41, 0x00);
8070 priv->hw_base = pci_iomap(pdev, 0, 0);
8071 if (!priv->hw_base) {
8073 goto out_pci_release_regions;
8076 IWL_DEBUG_INFO("pci_resource_len = 0x%08llx\n",
8077 (unsigned long long) pci_resource_len(pdev, 0));
8078 IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
8080 /* Initialize module parameter values here */
8082 /* Disable radio (SW RF KILL) via parameter when loading driver */
8083 if (iwl3945_param_disable) {
8084 set_bit(STATUS_RF_KILL_SW, &priv->status);
8085 IWL_DEBUG_INFO("Radio disabled.\n");
8088 priv->iw_mode = IEEE80211_IF_TYPE_STA;
8090 printk(KERN_INFO DRV_NAME
8091 ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name);
8093 /* Device-specific setup */
8094 if (iwl3945_hw_set_hw_setting(priv)) {
8095 IWL_ERROR("failed to set hw settings\n");
8099 if (iwl3945_param_qos_enable)
8100 priv->qos_data.qos_enable = 1;
8102 iwl3945_reset_qos(priv);
8104 priv->qos_data.qos_active = 0;
8105 priv->qos_data.qos_cap.val = 0;
8107 iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
8108 iwl3945_setup_deferred_work(priv);
8109 iwl3945_setup_rx_handlers(priv);
8111 priv->rates_mask = IWL_RATES_MASK;
8112 /* If power management is turned on, default to AC mode */
8113 priv->power_mode = IWL_POWER_AC;
8114 priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
8116 spin_lock_irqsave(&priv->lock, flags);
8117 iwl3945_disable_interrupts(priv);
8118 spin_unlock_irqrestore(&priv->lock, flags);
8120 err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8122 IWL_ERROR("failed to create sysfs device attributes\n");
8123 goto out_release_irq;
8127 iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
8128 CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
8130 iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
8131 err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
8132 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
8133 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
8135 IWL_DEBUG_INFO("Failed to init the card\n");
8136 goto out_remove_sysfs;
8138 /* Read the EEPROM */
8139 err = iwl3945_eeprom_init(priv);
8141 IWL_ERROR("Unable to init EEPROM\n");
8142 goto out_remove_sysfs;
8144 /* MAC Address location in EEPROM same for 3945/4965 */
8145 get_eeprom_mac(priv, priv->mac_addr);
8146 IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
8147 SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
8149 err = iwl3945_init_channel_map(priv);
8151 IWL_ERROR("initializing regulatory failed: %d\n", err);
8152 goto out_remove_sysfs;
8155 err = iwl3945_init_geos(priv);
8157 IWL_ERROR("initializing geos failed: %d\n", err);
8158 goto out_free_channel_map;
8161 err = ieee80211_register_hw(priv->hw);
8163 IWL_ERROR("Failed to register network device (error %d)\n", err);
8167 priv->hw->conf.beacon_int = 100;
8168 priv->mac80211_registered = 1;
8169 pci_save_state(pdev);
8170 pci_disable_device(pdev);
8175 iwl3945_free_geos(priv);
8176 out_free_channel_map:
8177 iwl3945_free_channel_map(priv);
8179 sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8182 destroy_workqueue(priv->workqueue);
8183 priv->workqueue = NULL;
8184 iwl3945_unset_hw_setting(priv);
8187 pci_iounmap(pdev, priv->hw_base);
8188 out_pci_release_regions:
8189 pci_release_regions(pdev);
8190 out_pci_disable_device:
8191 pci_disable_device(pdev);
8192 pci_set_drvdata(pdev, NULL);
8193 out_ieee80211_free_hw:
8194 ieee80211_free_hw(priv->hw);
8199 static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
8201 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8202 struct list_head *p, *q;
8204 unsigned long flags;
8209 IWL_DEBUG_INFO("*** UNLOAD DRIVER ***\n");
8211 set_bit(STATUS_EXIT_PENDING, &priv->status);
8215 /* make sure we flush any pending irq or
8216 * tasklet for the driver
8218 spin_lock_irqsave(&priv->lock, flags);
8219 iwl3945_disable_interrupts(priv);
8220 spin_unlock_irqrestore(&priv->lock, flags);
8222 iwl_synchronize_irq(priv);
8224 /* Free MAC hash list for ADHOC */
8225 for (i = 0; i < IWL_IBSS_MAC_HASH_SIZE; i++) {
8226 list_for_each_safe(p, q, &priv->ibss_mac_hash[i]) {
8228 kfree(list_entry(p, struct iwl3945_ibss_seq, list));
8232 sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
8234 iwl3945_dealloc_ucode_pci(priv);
8237 iwl3945_rx_queue_free(priv, &priv->rxq);
8238 iwl3945_hw_txq_ctx_free(priv);
8240 iwl3945_unset_hw_setting(priv);
8241 iwl3945_clear_stations_table(priv);
8243 if (priv->mac80211_registered) {
8244 ieee80211_unregister_hw(priv->hw);
8247 /*netif_stop_queue(dev); */
8248 flush_workqueue(priv->workqueue);
8250 /* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
8251 * priv->workqueue... so we can't take down the workqueue
8253 destroy_workqueue(priv->workqueue);
8254 priv->workqueue = NULL;
8256 pci_iounmap(pdev, priv->hw_base);
8257 pci_release_regions(pdev);
8258 pci_disable_device(pdev);
8259 pci_set_drvdata(pdev, NULL);
8261 iwl3945_free_channel_map(priv);
8262 iwl3945_free_geos(priv);
8264 if (priv->ibss_beacon)
8265 dev_kfree_skb(priv->ibss_beacon);
8267 ieee80211_free_hw(priv->hw);
8272 static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
8274 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8276 if (priv->is_open) {
8277 set_bit(STATUS_IN_SUSPEND, &priv->status);
8278 iwl3945_mac_stop(priv->hw);
8282 pci_set_power_state(pdev, PCI_D3hot);
8287 static int iwl3945_pci_resume(struct pci_dev *pdev)
8289 struct iwl3945_priv *priv = pci_get_drvdata(pdev);
8291 pci_set_power_state(pdev, PCI_D0);
8294 iwl3945_mac_start(priv->hw);
8296 clear_bit(STATUS_IN_SUSPEND, &priv->status);
8300 #endif /* CONFIG_PM */
8302 /*****************************************************************************
8304 * driver and module entry point
8306 *****************************************************************************/
8308 static struct pci_driver iwl3945_driver = {
8310 .id_table = iwl3945_hw_card_ids,
8311 .probe = iwl3945_pci_probe,
8312 .remove = __devexit_p(iwl3945_pci_remove),
8314 .suspend = iwl3945_pci_suspend,
8315 .resume = iwl3945_pci_resume,
8319 static int __init iwl3945_init(void)
8323 printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
8324 printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
8326 ret = iwl3945_rate_control_register();
8328 IWL_ERROR("Unable to register rate control algorithm: %d\n", ret);
8332 ret = pci_register_driver(&iwl3945_driver);
8334 IWL_ERROR("Unable to initialize PCI module\n");
8335 goto error_register;
8337 #ifdef CONFIG_IWL3945_DEBUG
8338 ret = driver_create_file(&iwl3945_driver.driver, &driver_attr_debug_level);
8340 IWL_ERROR("Unable to create driver sysfs file\n");
8347 #ifdef CONFIG_IWL3945_DEBUG
8349 pci_unregister_driver(&iwl3945_driver);
8352 iwl3945_rate_control_unregister();
8356 static void __exit iwl3945_exit(void)
8358 #ifdef CONFIG_IWL3945_DEBUG
8359 driver_remove_file(&iwl3945_driver.driver, &driver_attr_debug_level);
8361 pci_unregister_driver(&iwl3945_driver);
8362 iwl3945_rate_control_unregister();
8365 module_param_named(antenna, iwl3945_param_antenna, int, 0444);
8366 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
8367 module_param_named(disable, iwl3945_param_disable, int, 0444);
8368 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
8369 module_param_named(hwcrypto, iwl3945_param_hwcrypto, int, 0444);
8370 MODULE_PARM_DESC(hwcrypto,
8371 "using hardware crypto engine (default 0 [software])\n");
8372 module_param_named(debug, iwl3945_param_debug, int, 0444);
8373 MODULE_PARM_DESC(debug, "debug output mask");
8374 module_param_named(disable_hw_scan, iwl3945_param_disable_hw_scan, int, 0444);
8375 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
8377 module_param_named(queues_num, iwl3945_param_queues_num, int, 0444);
8378 MODULE_PARM_DESC(queues_num, "number of hw queues.");
8381 module_param_named(qos_enable, iwl3945_param_qos_enable, int, 0444);
8382 MODULE_PARM_DESC(qos_enable, "enable all QoS functionality");
8384 module_exit(iwl3945_exit);
8385 module_init(iwl3945_init);