git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-s3c2410.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  * (C) Copyright 2002 Hewlett-Packard Company
   7  *
   8  * USB Bus Glue for Samsung S3C2410
   9  *
  10  * Written by Christopher Hoover <ch@hpl.hp.com>
  11  * Based on fragments of previous driver by Russell King et al.
  12  *
  13  * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
  14  *      by Ben Dooks, <ben@simtec.co.uk>
  15  *      Copyright (C) 2004 Simtec Electronics
  16  *
  17  * Thanks to basprog@mail.ru for updates to newer kernels
  18  *
  19  * This file is licenced under the GPL.
  20 */
  21
  22 #include <linux/platform_device.h>
  23 #include <linux/clk.h>
  24 #include <plat/usb-control.h>
  25
  26 #define valid_port(idx) ((idx) == 1 || (idx) == 2)
  27
  28 /* clock device associated with the hcd */
  29
  30 static struct clk *clk;
  31 static struct clk *usb_clk;
  32
  33 /* forward definitions */
  34
  35 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
  36
  37 /* conversion functions */
  38
  39 static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
  40 {
  41         return hcd->self.controller->platform_data;
  42 }
  43
  44 static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
  45 {
  46         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  47
  48         dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
  49
  50         clk_enable(usb_clk);
  51         mdelay(2);                      /* let the bus clock stabilise */
  52
  53         clk_enable(clk);
  54
  55         if (info != NULL) {
  56                 info->hcd       = hcd;
  57                 info->report_oc = s3c2410_hcd_oc;
  58
  59                 if (info->enable_oc != NULL) {
  60                         (info->enable_oc)(info, 1);
  61                 }
  62         }
  63 }
  64
  65 static void s3c2410_stop_hc(struct platform_device *dev)
  66 {
  67         struct s3c2410_hcd_info *info = dev->dev.platform_data;
  68
  69         dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
  70
  71         if (info != NULL) {
  72                 info->report_oc = NULL;
  73                 info->hcd       = NULL;
  74
  75                 if (info->enable_oc != NULL) {
  76                         (info->enable_oc)(info, 0);
  77                 }
  78         }
  79
  80         clk_disable(clk);
  81         clk_disable(usb_clk);
  82 }
  83
  84 /* ohci_s3c2410_hub_status_data
  85  *
  86  * update the status data from the hub with anything that
  87  * has been detected by our system
  88 */
  89
  90 static int
  91 ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
  92 {
  93         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
  94         struct s3c2410_hcd_port *port;
  95         int orig;
  96         int portno;
  97
  98         orig  = ohci_hub_status_data (hcd, buf);
  99
 100         if (info == NULL)
 101                 return orig;
 102
 103         port = &info->port[0];
 104
 105         /* mark any changed port as changed */
 106
 107         for (portno = 0; portno < 2; port++, portno++) {
 108                 if (port->oc_changed == 1 &&
 109                     port->flags & S3C_HCDFLG_USED) {
 110                         dev_dbg(hcd->self.controller,
 111                                 "oc change on port %d\n", portno);
 112
 113                         if (orig < 1)
 114                                 orig = 1;
 115
 116                         buf[0] |= 1<<(portno+1);
 117                 }
 118         }
 119
 120         return orig;
 121 }
 122
 123 /* s3c2410_usb_set_power
 124  *
 125  * configure the power on a port, by calling the platform device
 126  * routine registered with the platform device
 127 */
 128
 129 static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
 130                                   int port, int to)
 131 {
 132         if (info == NULL)
 133                 return;
 134
 135         if (info->power_control != NULL) {
 136                 info->port[port-1].power = to;
 137                 (info->power_control)(port-1, to);
 138         }
 139 }
 140
 141 /* ohci_s3c2410_hub_control
 142  *
 143  * look at control requests to the hub, and see if we need
 144  * to take any action or over-ride the results from the
 145  * request.
 146 */
 147
 148 static int ohci_s3c2410_hub_control (
 149         struct usb_hcd  *hcd,
 150         u16             typeReq,
 151         u16             wValue,
 152         u16             wIndex,
 153         char            *buf,
 154         u16             wLength)
 155 {
 156         struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
 157         struct usb_hub_descriptor *desc;
 158         int ret = -EINVAL;
 159         u32 *data = (u32 *)buf;
 160
 161         dev_dbg(hcd->self.controller,
 162                 "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 163                 hcd, typeReq, wValue, wIndex, buf, wLength);
 164
 165         /* if we are only an humble host without any special capabilities
 166          * process the request straight away and exit */
 167
 168         if (info == NULL) {
 169                 ret = ohci_hub_control(hcd, typeReq, wValue,
 170                                        wIndex, buf, wLength);
 171                 goto out;
 172         }
 173
 174         /* check the request to see if it needs handling */
 175
 176         switch (typeReq) {
 177         case SetPortFeature:
 178                 if (wValue == USB_PORT_FEAT_POWER) {
 179                         dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
 180                         s3c2410_usb_set_power(info, wIndex, 1);
 181                         goto out;
 182                 }
 183                 break;
 184
 185         case ClearPortFeature:
 186                 switch (wValue) {
 187                 case USB_PORT_FEAT_C_OVER_CURRENT:
 188                         dev_dbg(hcd->self.controller,
 189                                 "ClearPortFeature: C_OVER_CURRENT\n");
 190
 191                         if (valid_port(wIndex)) {
 192                                 info->port[wIndex-1].oc_changed = 0;
 193                                 info->port[wIndex-1].oc_status = 0;
 194                         }
 195
 196                         goto out;
 197
 198                 case USB_PORT_FEAT_OVER_CURRENT:
 199                         dev_dbg(hcd->self.controller,
 200                                 "ClearPortFeature: OVER_CURRENT\n");
 201
 202                         if (valid_port(wIndex)) {
 203                                 info->port[wIndex-1].oc_status = 0;
 204                         }
 205
 206                         goto out;
 207
 208                 case USB_PORT_FEAT_POWER:
 209                         dev_dbg(hcd->self.controller,
 210                                 "ClearPortFeature: POWER\n");
 211
 212                         if (valid_port(wIndex)) {
 213                                 s3c2410_usb_set_power(info, wIndex, 0);
 214                                 return 0;
 215                         }
 216                 }
 217                 break;
 218         }
 219
 220         ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
 221         if (ret)
 222                 goto out;
 223
 224         switch (typeReq) {
 225         case GetHubDescriptor:
 226
 227                 /* update the hub's descriptor */
 228
 229                 desc = (struct usb_hub_descriptor *)buf;
 230
 231                 if (info->power_control == NULL)
 232                         return ret;
 233
 234                 dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
 235                         desc->wHubCharacteristics);
 236
 237                 /* remove the old configurations for power-switching, and
 238                  * over-current protection, and insert our new configuration
 239                  */
 240
 241                 desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
 242                 desc->wHubCharacteristics |= cpu_to_le16(0x0001);
 243
 244                 if (info->enable_oc) {
 245                         desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
 246                         desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
 247                 }
 248
 249                 dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
 250                         desc->wHubCharacteristics);
 251
 252                 return ret;
 253
 254         case GetPortStatus:
 255                 /* check port status */
 256
 257                 dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
 258
 259                 if (valid_port(wIndex)) {
 260                         if (info->port[wIndex-1].oc_changed) {
 261                                 *data |= cpu_to_le32(RH_PS_OCIC);
 262                         }
 263
 264                         if (info->port[wIndex-1].oc_status) {
 265                                 *data |= cpu_to_le32(RH_PS_POCI);
 266                         }
 267                 }
 268         }
 269
 270  out:
 271         return ret;
 272 }
 273
 274 /* s3c2410_hcd_oc
 275  *
 276  * handle an over-current report
 277 */
 278
 279 static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
 280 {
 281         struct s3c2410_hcd_port *port;
 282         struct usb_hcd *hcd;
 283         unsigned long flags;
 284         int portno;
 285
 286         if (info == NULL)
 287                 return;
 288
 289         port = &info->port[0];
 290         hcd = info->hcd;
 291
 292         local_irq_save(flags);
 293
 294         for (portno = 0; portno < 2; port++, portno++) {
 295                 if (port_oc & (1<<portno) &&
 296                     port->flags & S3C_HCDFLG_USED) {
 297                         port->oc_status = 1;
 298                         port->oc_changed = 1;
 299
 300                         /* ok, once over-current is detected,
 301                            the port needs to be powered down */
 302                         s3c2410_usb_set_power(info, portno+1, 0);
 303                 }
 304         }
 305
 306         local_irq_restore(flags);
 307 }
 308
 309 /* may be called without controller electrically present */
 310 /* may be called with controller, bus, and devices active */
 311
 312 /*
 313  * usb_hcd_s3c2410_remove - shutdown processing for HCD
 314  * @dev: USB Host Controller being removed
 315  * Context: !in_interrupt()
 316  *
 317  * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
 318  * the HCD's stop() method.  It is always called from a thread
 319  * context, normally "rmmod", "apmd", or something similar.
 320  *
 321 */
 322
 323 static void
 324 usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 325 {
 326         usb_remove_hcd(hcd);
 327         s3c2410_stop_hc(dev);
 328         iounmap(hcd->regs);
 329         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 330         usb_put_hcd(hcd);
 331 }
 332
 333 /**
 334  * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
 335  * Context: !in_interrupt()
 336  *
 337  * Allocates basic resources for this USB host controller, and
 338  * then invokes the start() method for the HCD associated with it
 339  * through the hotplug entry's driver_data.
 340  *
 341  */
 342 static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 343                                   struct platform_device *dev)
 344 {
 345         struct usb_hcd *hcd = NULL;
 346         int retval;
 347
 348         s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
 349         s3c2410_usb_set_power(dev->dev.platform_data, 2, 1);
 350
 351         hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
 352         if (hcd == NULL)
 353                 return -ENOMEM;
 354
 355         hcd->rsrc_start = dev->resource[0].start;
 356         hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
 357
 358         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 359                 dev_err(&dev->dev, "request_mem_region failed\n");
 360                 retval = -EBUSY;
 361                 goto err_put;
 362         }
 363
 364         clk = clk_get(&dev->dev, "usb-host");
 365         if (IS_ERR(clk)) {
 366                 dev_err(&dev->dev, "cannot get usb-host clock\n");
 367                 retval = -ENOENT;
 368                 goto err_mem;
 369         }
 370
 371         usb_clk = clk_get(&dev->dev, "usb-bus-host");
 372         if (IS_ERR(usb_clk)) {
 373                 dev_err(&dev->dev, "cannot get usb-bus-host clock\n");
 374                 retval = -ENOENT;
 375                 goto err_clk;
 376         }
 377
 378         s3c2410_start_hc(dev, hcd);
 379
 380         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 381         if (!hcd->regs) {
 382                 dev_err(&dev->dev, "ioremap failed\n");
 383                 retval = -ENOMEM;
 384                 goto err_ioremap;
 385         }
 386
 387         ohci_hcd_init(hcd_to_ohci(hcd));
 388
 389         retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
 390         if (retval != 0)
 391                 goto err_ioremap;
 392
 393         return 0;
 394
 395  err_ioremap:
 396         s3c2410_stop_hc(dev);
 397         iounmap(hcd->regs);
 398         clk_put(usb_clk);
 399
 400  err_clk:
 401         clk_put(clk);
 402
 403  err_mem:
 404         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 405
 406  err_put:
 407         usb_put_hcd(hcd);
 408         return retval;
 409 }
 410
 411 /*-------------------------------------------------------------------------*/
 412
 413 static int
 414 ohci_s3c2410_start (struct usb_hcd *hcd)
 415 {
 416         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 417         int ret;
 418
 419         if ((ret = ohci_init(ohci)) < 0)
 420                 return ret;
 421
 422         if ((ret = ohci_run (ohci)) < 0) {
 423                 err ("can't start %s", hcd->self.bus_name);
 424                 ohci_stop (hcd);
 425                 return ret;
 426         }
 427
 428         return 0;
 429 }
 430
 431
 432 static const struct hc_driver ohci_s3c2410_hc_driver = {
 433         .description =          hcd_name,
 434         .product_desc =         "S3C24XX OHCI",
 435         .hcd_priv_size =        sizeof(struct ohci_hcd),
 436
 437         /*
 438          * generic hardware linkage
 439          */
 440         .irq =                  ohci_irq,
 441         .flags =                HCD_USB11 | HCD_MEMORY,
 442
 443         /*
 444          * basic lifecycle operations
 445          */
 446         .start =                ohci_s3c2410_start,
 447         .stop =                 ohci_stop,
 448         .shutdown =             ohci_shutdown,
 449
 450         /*
 451          * managing i/o requests and associated device resources
 452          */
 453         .urb_enqueue =          ohci_urb_enqueue,
 454         .urb_dequeue =          ohci_urb_dequeue,
 455         .endpoint_disable =     ohci_endpoint_disable,
 456
 457         /*
 458          * scheduling support
 459          */
 460         .get_frame_number =     ohci_get_frame,
 461
 462         /*
 463          * root hub support
 464          */
 465         .hub_status_data =      ohci_s3c2410_hub_status_data,
 466         .hub_control =          ohci_s3c2410_hub_control,
 467 #ifdef  CONFIG_PM
 468         .bus_suspend =          ohci_bus_suspend,
 469         .bus_resume =           ohci_bus_resume,
 470 #endif
 471         .start_port_reset =     ohci_start_port_reset,
 472 };
 473
 474 /* device driver */
 475
 476 static int ohci_hcd_s3c2410_drv_probe(struct platform_device *pdev)
 477 {
 478         return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
 479 }
 480
 481 static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
 482 {
 483         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 484
 485         usb_hcd_s3c2410_remove(hcd, pdev);
 486         return 0;
 487 }
 488
 489 static struct platform_driver ohci_hcd_s3c2410_driver = {
 490         .probe          = ohci_hcd_s3c2410_drv_probe,
 491         .remove         = ohci_hcd_s3c2410_drv_remove,
 492         .shutdown       = usb_hcd_platform_shutdown,
 493         /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
 494         /*.resume       = ohci_hcd_s3c2410_drv_resume, */
 495         .driver         = {
 496                 .owner  = THIS_MODULE,
 497                 .name   = "s3c2410-ohci",
 498         },
 499 };
 500
 501 MODULE_ALIAS("platform:s3c2410-ohci");