git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/lpfc/lpfc_sli.c

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2004-2006 Emulex.  All rights reserved.           *
   5  * EMULEX and SLI are trademarks of Emulex.                        *
   6  * www.emulex.com                                                  *
   7  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
   8  *                                                                 *
   9  * This program is free software; you can redistribute it and/or   *
  10  * modify it under the terms of version 2 of the GNU General       *
  11  * Public License as published by the Free Software Foundation.    *
  12  * This program is distributed in the hope that it will be useful. *
  13  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  14  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  15  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  16  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  17  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  18  * more details, a copy of which can be found in the file COPYING  *
  19  * included with this package.                                     *
  20  *******************************************************************/
  21
  22 #include <linux/blkdev.h>
  23 #include <linux/pci.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/delay.h>
  26
  27 #include <scsi/scsi.h>
  28 #include <scsi/scsi_cmnd.h>
  29 #include <scsi/scsi_device.h>
  30 #include <scsi/scsi_host.h>
  31 #include <scsi/scsi_transport_fc.h>
  32
  33 #include "lpfc_hw.h"
  34 #include "lpfc_sli.h"
  35 #include "lpfc_disc.h"
  36 #include "lpfc_scsi.h"
  37 #include "lpfc.h"
  38 #include "lpfc_crtn.h"
  39 #include "lpfc_logmsg.h"
  40 #include "lpfc_compat.h"
  41
  42 /*
  43  * Define macro to log: Mailbox command x%x cannot issue Data
  44  * This allows multiple uses of lpfc_msgBlk0311
  45  * w/o perturbing log msg utility.
  46  */
  47 #define LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag) \
  48                         lpfc_printf_log(phba, \
  49                                 KERN_INFO, \
  50                                 LOG_MBOX | LOG_SLI, \
  51                                 "%d:0311 Mailbox command x%x cannot issue " \
  52                                 "Data: x%x x%x x%x\n", \
  53                                 phba->brd_no, \
  54                                 mb->mbxCommand,         \
  55                                 phba->hba_state,        \
  56                                 psli->sli_flag, \
  57                                 flag);
  58
  59
  60 /* There are only four IOCB completion types. */
  61 typedef enum _lpfc_iocb_type {
  62         LPFC_UNKNOWN_IOCB,
  63         LPFC_UNSOL_IOCB,
  64         LPFC_SOL_IOCB,
  65         LPFC_ABORT_IOCB
  66 } lpfc_iocb_type;
  67
  68 struct lpfc_iocbq *
  69 lpfc_sli_get_iocbq(struct lpfc_hba * phba)
  70 {
  71         struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
  72         struct lpfc_iocbq * iocbq = NULL;
  73
  74         list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list);
  75         return iocbq;
  76 }
  77
  78 void
  79 lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
  80 {
  81         size_t start_clean = (size_t)(&((struct lpfc_iocbq *)NULL)->iocb);
  82
  83         /*
  84          * Clean all volatile data fields, preserve iotag and node struct.
  85          */
  86         memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
  87         list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
  88 }
  89
  90 /*
  91  * Translate the iocb command to an iocb command type used to decide the final
  92  * disposition of each completed IOCB.
  93  */
  94 static lpfc_iocb_type
  95 lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
  96 {
  97         lpfc_iocb_type type = LPFC_UNKNOWN_IOCB;
  98
  99         if (iocb_cmnd > CMD_MAX_IOCB_CMD)
 100                 return 0;
 101
 102         switch (iocb_cmnd) {
 103         case CMD_XMIT_SEQUENCE_CR:
 104         case CMD_XMIT_SEQUENCE_CX:
 105         case CMD_XMIT_BCAST_CN:
 106         case CMD_XMIT_BCAST_CX:
 107         case CMD_ELS_REQUEST_CR:
 108         case CMD_ELS_REQUEST_CX:
 109         case CMD_CREATE_XRI_CR:
 110         case CMD_CREATE_XRI_CX:
 111         case CMD_GET_RPI_CN:
 112         case CMD_XMIT_ELS_RSP_CX:
 113         case CMD_GET_RPI_CR:
 114         case CMD_FCP_IWRITE_CR:
 115         case CMD_FCP_IWRITE_CX:
 116         case CMD_FCP_IREAD_CR:
 117         case CMD_FCP_IREAD_CX:
 118         case CMD_FCP_ICMND_CR:
 119         case CMD_FCP_ICMND_CX:
 120         case CMD_ADAPTER_MSG:
 121         case CMD_ADAPTER_DUMP:
 122         case CMD_XMIT_SEQUENCE64_CR:
 123         case CMD_XMIT_SEQUENCE64_CX:
 124         case CMD_XMIT_BCAST64_CN:
 125         case CMD_XMIT_BCAST64_CX:
 126         case CMD_ELS_REQUEST64_CR:
 127         case CMD_ELS_REQUEST64_CX:
 128         case CMD_FCP_IWRITE64_CR:
 129         case CMD_FCP_IWRITE64_CX:
 130         case CMD_FCP_IREAD64_CR:
 131         case CMD_FCP_IREAD64_CX:
 132         case CMD_FCP_ICMND64_CR:
 133         case CMD_FCP_ICMND64_CX:
 134         case CMD_GEN_REQUEST64_CR:
 135         case CMD_GEN_REQUEST64_CX:
 136         case CMD_XMIT_ELS_RSP64_CX:
 137                 type = LPFC_SOL_IOCB;
 138                 break;
 139         case CMD_ABORT_XRI_CN:
 140         case CMD_ABORT_XRI_CX:
 141         case CMD_CLOSE_XRI_CN:
 142         case CMD_CLOSE_XRI_CX:
 143         case CMD_XRI_ABORTED_CX:
 144         case CMD_ABORT_MXRI64_CN:
 145                 type = LPFC_ABORT_IOCB;
 146                 break;
 147         case CMD_RCV_SEQUENCE_CX:
 148         case CMD_RCV_ELS_REQ_CX:
 149         case CMD_RCV_SEQUENCE64_CX:
 150         case CMD_RCV_ELS_REQ64_CX:
 151                 type = LPFC_UNSOL_IOCB;
 152                 break;
 153         default:
 154                 type = LPFC_UNKNOWN_IOCB;
 155                 break;
 156         }
 157
 158         return type;
 159 }
 160
 161 static int
 162 lpfc_sli_ring_map(struct lpfc_hba * phba, LPFC_MBOXQ_t *pmb)
 163 {
 164         struct lpfc_sli *psli = &phba->sli;
 165         MAILBOX_t *pmbox = &pmb->mb;
 166         int i, rc;
 167
 168         for (i = 0; i < psli->num_rings; i++) {
 169                 phba->hba_state = LPFC_INIT_MBX_CMDS;
 170                 lpfc_config_ring(phba, i, pmb);
 171                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
 172                 if (rc != MBX_SUCCESS) {
 173                         lpfc_printf_log(phba,
 174                                         KERN_ERR,
 175                                         LOG_INIT,
 176                                         "%d:0446 Adapter failed to init, "
 177                                         "mbxCmd x%x CFG_RING, mbxStatus x%x, "
 178                                         "ring %d\n",
 179                                         phba->brd_no,
 180                                         pmbox->mbxCommand,
 181                                         pmbox->mbxStatus,
 182                                         i);
 183                         phba->hba_state = LPFC_HBA_ERROR;
 184                         return -ENXIO;
 185                 }
 186         }
 187         return 0;
 188 }
 189
 190 static int
 191 lpfc_sli_ringtxcmpl_put(struct lpfc_hba * phba,
 192                         struct lpfc_sli_ring * pring, struct lpfc_iocbq * piocb)
 193 {
 194         uint16_t iotag;
 195
 196         list_add_tail(&piocb->list, &pring->txcmplq);
 197         pring->txcmplq_cnt++;
 198         if (unlikely(pring->ringno == LPFC_ELS_RING))
 199                 mod_timer(&phba->els_tmofunc,
 200                                         jiffies + HZ * (phba->fc_ratov << 1));
 201
 202         if (pring->fast_lookup) {
 203                 /* Setup fast lookup based on iotag for completion */
 204                 iotag = piocb->iocb.ulpIoTag;
 205                 if (iotag && (iotag < pring->fast_iotag))
 206                         *(pring->fast_lookup + iotag) = piocb;
 207                 else {
 208
 209                         /* Cmd ring <ringno> put: iotag <iotag> greater then
 210                            configured max <fast_iotag> wd0 <icmd> */
 211                         lpfc_printf_log(phba,
 212                                         KERN_ERR,
 213                                         LOG_SLI,
 214                                         "%d:0316 Cmd ring %d put: iotag x%x "
 215                                         "greater then configured max x%x "
 216                                         "wd0 x%x\n",
 217                                         phba->brd_no,
 218                                         pring->ringno, iotag,
 219                                         pring->fast_iotag,
 220                                         *(((uint32_t *)(&piocb->iocb)) + 7));
 221                 }
 222         }
 223         return (0);
 224 }
 225
 226 static struct lpfc_iocbq *
 227 lpfc_sli_ringtx_get(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
 228 {
 229         struct list_head *dlp;
 230         struct lpfc_iocbq *cmd_iocb;
 231
 232         dlp = &pring->txq;
 233         cmd_iocb = NULL;
 234         list_remove_head((&pring->txq), cmd_iocb,
 235                          struct lpfc_iocbq,
 236                          list);
 237         if (cmd_iocb) {
 238                 /* If the first ptr is not equal to the list header,
 239                  * deque the IOCBQ_t and return it.
 240                  */
 241                 pring->txq_cnt--;
 242         }
 243         return (cmd_iocb);
 244 }
 245
 246 static IOCB_t *
 247 lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
 248 {
 249         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
 250         uint32_t  max_cmd_idx = pring->numCiocb;
 251         IOCB_t *iocb = NULL;
 252
 253         if ((pring->next_cmdidx == pring->cmdidx) &&
 254            (++pring->next_cmdidx >= max_cmd_idx))
 255                 pring->next_cmdidx = 0;
 256
 257         if (unlikely(pring->local_getidx == pring->next_cmdidx)) {
 258
 259                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
 260
 261                 if (unlikely(pring->local_getidx >= max_cmd_idx)) {
 262                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 263                                         "%d:0315 Ring %d issue: portCmdGet %d "
 264                                         "is bigger then cmd ring %d\n",
 265                                         phba->brd_no, pring->ringno,
 266                                         pring->local_getidx, max_cmd_idx);
 267
 268                         phba->hba_state = LPFC_HBA_ERROR;
 269                         /*
 270                          * All error attention handlers are posted to
 271                          * worker thread
 272                          */
 273                         phba->work_ha |= HA_ERATT;
 274                         phba->work_hs = HS_FFER3;
 275                         if (phba->work_wait)
 276                                 wake_up(phba->work_wait);
 277
 278                         return NULL;
 279                 }
 280
 281                 if (pring->local_getidx == pring->next_cmdidx)
 282                         return NULL;
 283         }
 284
 285         iocb = IOCB_ENTRY(pring->cmdringaddr, pring->cmdidx);
 286
 287         return iocb;
 288 }
 289
 290 uint16_t
 291 lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocbq)
 292 {
 293         struct lpfc_iocbq ** new_arr;
 294         struct lpfc_iocbq ** old_arr;
 295         size_t new_len;
 296         struct lpfc_sli *psli = &phba->sli;
 297         uint16_t iotag;
 298
 299         spin_lock_irq(phba->host->host_lock);
 300         iotag = psli->last_iotag;
 301         if(++iotag < psli->iocbq_lookup_len) {
 302                 psli->last_iotag = iotag;
 303                 psli->iocbq_lookup[iotag] = iocbq;
 304                 spin_unlock_irq(phba->host->host_lock);
 305                 iocbq->iotag = iotag;
 306                 return iotag;
 307         }
 308         else if (psli->iocbq_lookup_len < (0xffff
 309                                            - LPFC_IOCBQ_LOOKUP_INCREMENT)) {
 310                 new_len = psli->iocbq_lookup_len + LPFC_IOCBQ_LOOKUP_INCREMENT;
 311                 spin_unlock_irq(phba->host->host_lock);
 312                 new_arr = kmalloc(new_len * sizeof (struct lpfc_iocbq *),
 313                                   GFP_KERNEL);
 314                 if (new_arr) {
 315                         memset((char *)new_arr, 0,
 316                                new_len * sizeof (struct lpfc_iocbq *));
 317                         spin_lock_irq(phba->host->host_lock);
 318                         old_arr = psli->iocbq_lookup;
 319                         if (new_len <= psli->iocbq_lookup_len) {
 320                                 /* highly unprobable case */
 321                                 kfree(new_arr);
 322                                 iotag = psli->last_iotag;
 323                                 if(++iotag < psli->iocbq_lookup_len) {
 324                                         psli->last_iotag = iotag;
 325                                         psli->iocbq_lookup[iotag] = iocbq;
 326                                         spin_unlock_irq(phba->host->host_lock);
 327                                         iocbq->iotag = iotag;
 328                                         return iotag;
 329                                 }
 330                                 spin_unlock_irq(phba->host->host_lock);
 331                                 return 0;
 332                         }
 333                         if (psli->iocbq_lookup)
 334                                 memcpy(new_arr, old_arr,
 335                                        ((psli->last_iotag  + 1) *
 336                                         sizeof (struct lpfc_iocbq *)));
 337                         psli->iocbq_lookup = new_arr;
 338                         psli->iocbq_lookup_len = new_len;
 339                         psli->last_iotag = iotag;
 340                         psli->iocbq_lookup[iotag] = iocbq;
 341                         spin_unlock_irq(phba->host->host_lock);
 342                         iocbq->iotag = iotag;
 343                         kfree(old_arr);
 344                         return iotag;
 345                 }
 346         }
 347
 348         lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
 349                         "%d:0318 Failed to allocate IOTAG.last IOTAG is %d\n",
 350                         phba->brd_no, psli->last_iotag);
 351
 352         return 0;
 353 }
 354
 355 static void
 356 lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 357                 IOCB_t *iocb, struct lpfc_iocbq *nextiocb)
 358 {
 359         /*
 360          * Set up an iotag
 361          */
 362         nextiocb->iocb.ulpIoTag = (nextiocb->iocb_cmpl) ? nextiocb->iotag : 0;
 363
 364         /*
 365          * Issue iocb command to adapter
 366          */
 367         lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, sizeof (IOCB_t));
 368         wmb();
 369         pring->stats.iocb_cmd++;
 370
 371         /*
 372          * If there is no completion routine to call, we can release the
 373          * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
 374          * that have no rsp ring completion, iocb_cmpl MUST be NULL.
 375          */
 376         if (nextiocb->iocb_cmpl)
 377                 lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
 378         else
 379                 lpfc_sli_release_iocbq(phba, nextiocb);
 380
 381         /*
 382          * Let the HBA know what IOCB slot will be the next one the
 383          * driver will put a command into.
 384          */
 385         pring->cmdidx = pring->next_cmdidx;
 386         writel(pring->cmdidx, phba->MBslimaddr
 387                + (SLIMOFF + (pring->ringno * 2)) * 4);
 388 }
 389
 390 static void
 391 lpfc_sli_update_full_ring(struct lpfc_hba * phba,
 392                           struct lpfc_sli_ring *pring)
 393 {
 394         int ringno = pring->ringno;
 395
 396         pring->flag |= LPFC_CALL_RING_AVAILABLE;
 397
 398         wmb();
 399
 400         /*
 401          * Set ring 'ringno' to SET R0CE_REQ in Chip Att register.
 402          * The HBA will tell us when an IOCB entry is available.
 403          */
 404         writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr);
 405         readl(phba->CAregaddr); /* flush */
 406
 407         pring->stats.iocb_cmd_full++;
 408 }
 409
 410 static void
 411 lpfc_sli_update_ring(struct lpfc_hba * phba,
 412                      struct lpfc_sli_ring *pring)
 413 {
 414         int ringno = pring->ringno;
 415
 416         /*
 417          * Tell the HBA that there is work to do in this ring.
 418          */
 419         wmb();
 420         writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
 421         readl(phba->CAregaddr); /* flush */
 422 }
 423
 424 static void
 425 lpfc_sli_resume_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring)
 426 {
 427         IOCB_t *iocb;
 428         struct lpfc_iocbq *nextiocb;
 429
 430         /*
 431          * Check to see if:
 432          *  (a) there is anything on the txq to send
 433          *  (b) link is up
 434          *  (c) link attention events can be processed (fcp ring only)
 435          *  (d) IOCB processing is not blocked by the outstanding mbox command.
 436          */
 437         if (pring->txq_cnt &&
 438             (phba->hba_state > LPFC_LINK_DOWN) &&
 439             (pring->ringno != phba->sli.fcp_ring ||
 440              phba->sli.sli_flag & LPFC_PROCESS_LA) &&
 441             !(pring->flag & LPFC_STOP_IOCB_MBX)) {
 442
 443                 while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
 444                        (nextiocb = lpfc_sli_ringtx_get(phba, pring)))
 445                         lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
 446
 447                 if (iocb)
 448                         lpfc_sli_update_ring(phba, pring);
 449                 else
 450                         lpfc_sli_update_full_ring(phba, pring);
 451         }
 452
 453         return;
 454 }
 455
 456 /* lpfc_sli_turn_on_ring is only called by lpfc_sli_handle_mb_event below */
 457 static void
 458 lpfc_sli_turn_on_ring(struct lpfc_hba * phba, int ringno)
 459 {
 460         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[ringno];
 461
 462         /* If the ring is active, flag it */
 463         if (phba->sli.ring[ringno].cmdringaddr) {
 464                 if (phba->sli.ring[ringno].flag & LPFC_STOP_IOCB_MBX) {
 465                         phba->sli.ring[ringno].flag &= ~LPFC_STOP_IOCB_MBX;
 466                         /*
 467                          * Force update of the local copy of cmdGetInx
 468                          */
 469                         phba->sli.ring[ringno].local_getidx
 470                                 = le32_to_cpu(pgp->cmdGetInx);
 471                         spin_lock_irq(phba->host->host_lock);
 472                         lpfc_sli_resume_iocb(phba, &phba->sli.ring[ringno]);
 473                         spin_unlock_irq(phba->host->host_lock);
 474                 }
 475         }
 476 }
 477
 478 static int
 479 lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 480 {
 481         uint8_t ret;
 482
 483         switch (mbxCommand) {
 484         case MBX_LOAD_SM:
 485         case MBX_READ_NV:
 486         case MBX_WRITE_NV:
 487         case MBX_RUN_BIU_DIAG:
 488         case MBX_INIT_LINK:
 489         case MBX_DOWN_LINK:
 490         case MBX_CONFIG_LINK:
 491         case MBX_CONFIG_RING:
 492         case MBX_RESET_RING:
 493         case MBX_READ_CONFIG:
 494         case MBX_READ_RCONFIG:
 495         case MBX_READ_SPARM:
 496         case MBX_READ_STATUS:
 497         case MBX_READ_RPI:
 498         case MBX_READ_XRI:
 499         case MBX_READ_REV:
 500         case MBX_READ_LNK_STAT:
 501         case MBX_REG_LOGIN:
 502         case MBX_UNREG_LOGIN:
 503         case MBX_READ_LA:
 504         case MBX_CLEAR_LA:
 505         case MBX_DUMP_MEMORY:
 506         case MBX_DUMP_CONTEXT:
 507         case MBX_RUN_DIAGS:
 508         case MBX_RESTART:
 509         case MBX_UPDATE_CFG:
 510         case MBX_DOWN_LOAD:
 511         case MBX_DEL_LD_ENTRY:
 512         case MBX_RUN_PROGRAM:
 513         case MBX_SET_MASK:
 514         case MBX_SET_SLIM:
 515         case MBX_UNREG_D_ID:
 516         case MBX_KILL_BOARD:
 517         case MBX_CONFIG_FARP:
 518         case MBX_BEACON:
 519         case MBX_LOAD_AREA:
 520         case MBX_RUN_BIU_DIAG64:
 521         case MBX_CONFIG_PORT:
 522         case MBX_READ_SPARM64:
 523         case MBX_READ_RPI64:
 524         case MBX_REG_LOGIN64:
 525         case MBX_READ_LA64:
 526         case MBX_FLASH_WR_ULA:
 527         case MBX_SET_DEBUG:
 528         case MBX_LOAD_EXP_ROM:
 529                 ret = mbxCommand;
 530                 break;
 531         default:
 532                 ret = MBX_SHUTDOWN;
 533                 break;
 534         }
 535         return (ret);
 536 }
 537 static void
 538 lpfc_sli_wake_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
 539 {
 540         wait_queue_head_t *pdone_q;
 541
 542         /*
 543          * If pdone_q is empty, the driver thread gave up waiting and
 544          * continued running.
 545          */
 546         pdone_q = (wait_queue_head_t *) pmboxq->context1;
 547         if (pdone_q)
 548                 wake_up_interruptible(pdone_q);
 549         return;
 550 }
 551
 552 void
 553 lpfc_sli_def_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 554 {
 555         struct lpfc_dmabuf *mp;
 556         mp = (struct lpfc_dmabuf *) (pmb->context1);
 557         if (mp) {
 558                 lpfc_mbuf_free(phba, mp->virt, mp->phys);
 559                 kfree(mp);
 560         }
 561         mempool_free( pmb, phba->mbox_mem_pool);
 562         return;
 563 }
 564
 565 int
 566 lpfc_sli_handle_mb_event(struct lpfc_hba * phba)
 567 {
 568         MAILBOX_t *mbox;
 569         MAILBOX_t *pmbox;
 570         LPFC_MBOXQ_t *pmb;
 571         struct lpfc_sli *psli;
 572         int i, rc;
 573         uint32_t process_next;
 574
 575         psli = &phba->sli;
 576         /* We should only get here if we are in SLI2 mode */
 577         if (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE)) {
 578                 return (1);
 579         }
 580
 581         phba->sli.slistat.mbox_event++;
 582
 583         /* Get a Mailbox buffer to setup mailbox commands for callback */
 584         if ((pmb = phba->sli.mbox_active)) {
 585                 pmbox = &pmb->mb;
 586                 mbox = &phba->slim2p->mbx;
 587
 588                 /* First check out the status word */
 589                 lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof (uint32_t));
 590
 591                 /* Sanity check to ensure the host owns the mailbox */
 592                 if (pmbox->mbxOwner != OWN_HOST) {
 593                         /* Lets try for a while */
 594                         for (i = 0; i < 10240; i++) {
 595                                 /* First copy command data */
 596                                 lpfc_sli_pcimem_bcopy(mbox, pmbox,
 597                                                         sizeof (uint32_t));
 598                                 if (pmbox->mbxOwner == OWN_HOST)
 599                                         goto mbout;
 600                         }
 601                         /* Stray Mailbox Interrupt, mbxCommand <cmd> mbxStatus
 602                            <status> */
 603                         lpfc_printf_log(phba,
 604                                         KERN_ERR,
 605                                         LOG_MBOX | LOG_SLI,
 606                                         "%d:0304 Stray Mailbox Interrupt "
 607                                         "mbxCommand x%x mbxStatus x%x\n",
 608                                         phba->brd_no,
 609                                         pmbox->mbxCommand,
 610                                         pmbox->mbxStatus);
 611
 612                         spin_lock_irq(phba->host->host_lock);
 613                         phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
 614                         spin_unlock_irq(phba->host->host_lock);
 615                         return (1);
 616                 }
 617
 618               mbout:
 619                 del_timer_sync(&phba->sli.mbox_tmo);
 620                 phba->work_hba_events &= ~WORKER_MBOX_TMO;
 621
 622                 /*
 623                  * It is a fatal error if unknown mbox command completion.
 624                  */
 625                 if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
 626                     MBX_SHUTDOWN) {
 627
 628                         /* Unknow mailbox command compl */
 629                         lpfc_printf_log(phba,
 630                                 KERN_ERR,
 631                                 LOG_MBOX | LOG_SLI,
 632                                 "%d:0323 Unknown Mailbox command %x Cmpl\n",
 633                                 phba->brd_no,
 634                                 pmbox->mbxCommand);
 635                         phba->hba_state = LPFC_HBA_ERROR;
 636                         phba->work_hs = HS_FFER3;
 637                         lpfc_handle_eratt(phba);
 638                         return (0);
 639                 }
 640
 641                 phba->sli.mbox_active = NULL;
 642                 if (pmbox->mbxStatus) {
 643                         phba->sli.slistat.mbox_stat_err++;
 644                         if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
 645                                 /* Mbox cmd cmpl error - RETRYing */
 646                                 lpfc_printf_log(phba,
 647                                         KERN_INFO,
 648                                         LOG_MBOX | LOG_SLI,
 649                                         "%d:0305 Mbox cmd cmpl error - "
 650                                         "RETRYing Data: x%x x%x x%x x%x\n",
 651                                         phba->brd_no,
 652                                         pmbox->mbxCommand,
 653                                         pmbox->mbxStatus,
 654                                         pmbox->un.varWords[0],
 655                                         phba->hba_state);
 656                                 pmbox->mbxStatus = 0;
 657                                 pmbox->mbxOwner = OWN_HOST;
 658                                 spin_lock_irq(phba->host->host_lock);
 659                                 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 660                                 spin_unlock_irq(phba->host->host_lock);
 661                                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 662                                 if (rc == MBX_SUCCESS)
 663                                         return (0);
 664                         }
 665                 }
 666
 667                 /* Mailbox cmd <cmd> Cmpl <cmpl> */
 668                 lpfc_printf_log(phba,
 669                                 KERN_INFO,
 670                                 LOG_MBOX | LOG_SLI,
 671                                 "%d:0307 Mailbox cmd x%x Cmpl x%p "
 672                                 "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
 673                                 phba->brd_no,
 674                                 pmbox->mbxCommand,
 675                                 pmb->mbox_cmpl,
 676                                 *((uint32_t *) pmbox),
 677                                 pmbox->un.varWords[0],
 678                                 pmbox->un.varWords[1],
 679                                 pmbox->un.varWords[2],
 680                                 pmbox->un.varWords[3],
 681                                 pmbox->un.varWords[4],
 682                                 pmbox->un.varWords[5],
 683                                 pmbox->un.varWords[6],
 684                                 pmbox->un.varWords[7]);
 685
 686                 if (pmb->mbox_cmpl) {
 687                         lpfc_sli_pcimem_bcopy(mbox, pmbox, MAILBOX_CMD_SIZE);
 688                         pmb->mbox_cmpl(phba,pmb);
 689                 }
 690         }
 691
 692
 693         do {
 694                 process_next = 0;       /* by default don't loop */
 695                 spin_lock_irq(phba->host->host_lock);
 696                 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 697
 698                 /* Process next mailbox command if there is one */
 699                 if ((pmb = lpfc_mbox_get(phba))) {
 700                         spin_unlock_irq(phba->host->host_lock);
 701                         rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
 702                         if (rc == MBX_NOT_FINISHED) {
 703                                 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
 704                                 pmb->mbox_cmpl(phba,pmb);
 705                                 process_next = 1;
 706                                 continue;       /* loop back */
 707                         }
 708                 } else {
 709                         spin_unlock_irq(phba->host->host_lock);
 710                         /* Turn on IOCB processing */
 711                         for (i = 0; i < phba->sli.num_rings; i++) {
 712                                 lpfc_sli_turn_on_ring(phba, i);
 713                         }
 714
 715                         /* Free any lpfc_dmabuf's waiting for mbox cmd cmpls */
 716                         while (!list_empty(&phba->freebufList)) {
 717                                 struct lpfc_dmabuf *mp;
 718
 719                                 mp = NULL;
 720                                 list_remove_head((&phba->freebufList),
 721                                                  mp,
 722                                                  struct lpfc_dmabuf,
 723                                                  list);
 724                                 if (mp) {
 725                                         lpfc_mbuf_free(phba, mp->virt,
 726                                                        mp->phys);
 727                                         kfree(mp);
 728                                 }
 729                         }
 730                 }
 731
 732         } while (process_next);
 733
 734         return (0);
 735 }
 736 static int
 737 lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 738                             struct lpfc_iocbq *saveq)
 739 {
 740         IOCB_t           * irsp;
 741         WORD5            * w5p;
 742         uint32_t           Rctl, Type;
 743         uint32_t           match, i;
 744
 745         match = 0;
 746         irsp = &(saveq->iocb);
 747         if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX)
 748             || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX)) {
 749                 Rctl = FC_ELS_REQ;
 750                 Type = FC_ELS_DATA;
 751         } else {
 752                 w5p =
 753                     (WORD5 *) & (saveq->iocb.un.
 754                                  ulpWord[5]);
 755                 Rctl = w5p->hcsw.Rctl;
 756                 Type = w5p->hcsw.Type;
 757
 758                 /* Firmware Workaround */
 759                 if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
 760                         (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX)) {
 761                         Rctl = FC_ELS_REQ;
 762                         Type = FC_ELS_DATA;
 763                         w5p->hcsw.Rctl = Rctl;
 764                         w5p->hcsw.Type = Type;
 765                 }
 766         }
 767         /* unSolicited Responses */
 768         if (pring->prt[0].profile) {
 769                 if (pring->prt[0].lpfc_sli_rcv_unsol_event)
 770                         (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
 771                                                                         saveq);
 772                 match = 1;
 773         } else {
 774                 /* We must search, based on rctl / type
 775                    for the right routine */
 776                 for (i = 0; i < pring->num_mask;
 777                      i++) {
 778                         if ((pring->prt[i].rctl ==
 779                              Rctl)
 780                             && (pring->prt[i].
 781                                 type == Type)) {
 782                                 if (pring->prt[i].lpfc_sli_rcv_unsol_event)
 783                                         (pring->prt[i].lpfc_sli_rcv_unsol_event)
 784                                                         (phba, pring, saveq);
 785                                 match = 1;
 786                                 break;
 787                         }
 788                 }
 789         }
 790         if (match == 0) {
 791                 /* Unexpected Rctl / Type received */
 792                 /* Ring <ringno> handler: unexpected
 793                    Rctl <Rctl> Type <Type> received */
 794                 lpfc_printf_log(phba,
 795                                 KERN_WARNING,
 796                                 LOG_SLI,
 797                                 "%d:0313 Ring %d handler: unexpected Rctl x%x "
 798                                 "Type x%x received \n",
 799                                 phba->brd_no,
 800                                 pring->ringno,
 801                                 Rctl,
 802                                 Type);
 803         }
 804         return(1);
 805 }
 806
 807 static struct lpfc_iocbq *
 808 lpfc_sli_iocbq_lookup(struct lpfc_hba * phba,
 809                       struct lpfc_sli_ring * pring,
 810                       struct lpfc_iocbq * prspiocb)
 811 {
 812         struct lpfc_iocbq *cmd_iocb = NULL;
 813         uint16_t iotag;
 814
 815         iotag = prspiocb->iocb.ulpIoTag;
 816
 817         if (iotag != 0 && iotag <= phba->sli.last_iotag) {
 818                 cmd_iocb = phba->sli.iocbq_lookup[iotag];
 819                 list_del(&cmd_iocb->list);
 820                 pring->txcmplq_cnt--;
 821                 return cmd_iocb;
 822         }
 823
 824         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 825                         "%d:0317 iotag x%x is out off "
 826                         "range: max iotag x%x wd0 x%x\n",
 827                         phba->brd_no, iotag,
 828                         phba->sli.last_iotag,
 829                         *(((uint32_t *) &prspiocb->iocb) + 7));
 830         return NULL;
 831 }
 832
 833 static int
 834 lpfc_sli_process_sol_iocb(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
 835                           struct lpfc_iocbq *saveq)
 836 {
 837         struct lpfc_iocbq * cmdiocbp;
 838         int rc = 1;
 839         unsigned long iflag;
 840
 841         /* Based on the iotag field, get the cmd IOCB from the txcmplq */
 842         spin_lock_irqsave(phba->host->host_lock, iflag);
 843         cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
 844         if (cmdiocbp) {
 845                 if (cmdiocbp->iocb_cmpl) {
 846                         /*
 847                          * Post all ELS completions to the worker thread.
 848                          * All other are passed to the completion callback.
 849                          */
 850                         if (pring->ringno == LPFC_ELS_RING) {
 851                                 spin_unlock_irqrestore(phba->host->host_lock,
 852                                                        iflag);
 853                                 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
 854                                 spin_lock_irqsave(phba->host->host_lock, iflag);
 855                         }
 856                         else {
 857                                 spin_unlock_irqrestore(phba->host->host_lock,
 858                                                        iflag);
 859                                 (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq);
 860                                 spin_lock_irqsave(phba->host->host_lock, iflag);
 861                         }
 862                 } else
 863                         lpfc_sli_release_iocbq(phba, cmdiocbp);
 864         } else {
 865                 /*
 866                  * Unknown initiating command based on the response iotag.
 867                  * This could be the case on the ELS ring because of
 868                  * lpfc_els_abort().
 869                  */
 870                 if (pring->ringno != LPFC_ELS_RING) {
 871                         /*
 872                          * Ring <ringno> handler: unexpected completion IoTag
 873                          * <IoTag>
 874                          */
 875                         lpfc_printf_log(phba,
 876                                 KERN_WARNING,
 877                                 LOG_SLI,
 878                                 "%d:0322 Ring %d handler: unexpected "
 879                                 "completion IoTag x%x Data: x%x x%x x%x x%x\n",
 880                                 phba->brd_no,
 881                                 pring->ringno,
 882                                 saveq->iocb.ulpIoTag,
 883                                 saveq->iocb.ulpStatus,
 884                                 saveq->iocb.un.ulpWord[4],
 885                                 saveq->iocb.ulpCommand,
 886                                 saveq->iocb.ulpContext);
 887                 }
 888         }
 889
 890         spin_unlock_irqrestore(phba->host->host_lock, iflag);
 891         return rc;
 892 }
 893
 894 static void lpfc_sli_rsp_pointers_error(struct lpfc_hba * phba,
 895                                         struct lpfc_sli_ring * pring)
 896 {
 897         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
 898         /*
 899          * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
 900          * rsp ring <portRspMax>
 901          */
 902         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 903                         "%d:0312 Ring %d handler: portRspPut %d "
 904                         "is bigger then rsp ring %d\n",
 905                         phba->brd_no, pring->ringno,
 906                         le32_to_cpu(pgp->rspPutInx),
 907                         pring->numRiocb);
 908
 909         phba->hba_state = LPFC_HBA_ERROR;
 910
 911         /*
 912          * All error attention handlers are posted to
 913          * worker thread
 914          */
 915         phba->work_ha |= HA_ERATT;
 916         phba->work_hs = HS_FFER3;
 917         if (phba->work_wait)
 918                 wake_up(phba->work_wait);
 919
 920         return;
 921 }
 922
 923 void lpfc_sli_poll_fcp_ring(struct lpfc_hba * phba)
 924 {
 925         struct lpfc_sli      * psli   = &phba->sli;
 926         struct lpfc_sli_ring * pring = &psli->ring[LPFC_FCP_RING];
 927         IOCB_t *irsp = NULL;
 928         IOCB_t *entry = NULL;
 929         struct lpfc_iocbq *cmdiocbq = NULL;
 930         struct lpfc_iocbq rspiocbq;
 931         struct lpfc_pgp *pgp;
 932         uint32_t status;
 933         uint32_t portRspPut, portRspMax;
 934         int type;
 935         uint32_t rsp_cmpl = 0;
 936         void __iomem *to_slim;
 937         uint32_t ha_copy;
 938
 939         pring->stats.iocb_event++;
 940
 941         /* The driver assumes SLI-2 mode */
 942         pgp =  &phba->slim2p->mbx.us.s2.port[pring->ringno];
 943
 944         /*
 945          * The next available response entry should never exceed the maximum
 946          * entries.  If it does, treat it as an adapter hardware error.
 947          */
 948         portRspMax = pring->numRiocb;
 949         portRspPut = le32_to_cpu(pgp->rspPutInx);
 950         if (unlikely(portRspPut >= portRspMax)) {
 951                 lpfc_sli_rsp_pointers_error(phba, pring);
 952                 return;
 953         }
 954
 955         rmb();
 956         while (pring->rspidx != portRspPut) {
 957
 958                 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
 959
 960                 if (++pring->rspidx >= portRspMax)
 961                         pring->rspidx = 0;
 962
 963                 lpfc_sli_pcimem_bcopy((uint32_t *) entry,
 964                                       (uint32_t *) &rspiocbq.iocb,
 965                                       sizeof (IOCB_t));
 966                 irsp = &rspiocbq.iocb;
 967                 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
 968                 pring->stats.iocb_rsp++;
 969                 rsp_cmpl++;
 970
 971                 if (unlikely(irsp->ulpStatus)) {
 972                         /* Rsp ring <ringno> error: IOCB */
 973                         lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 974                                         "%d:0326 Rsp Ring %d error: IOCB Data: "
 975                                         "x%x x%x x%x x%x x%x x%x x%x x%x\n",
 976                                         phba->brd_no, pring->ringno,
 977                                         irsp->un.ulpWord[0],
 978                                         irsp->un.ulpWord[1],
 979                                         irsp->un.ulpWord[2],
 980                                         irsp->un.ulpWord[3],
 981                                         irsp->un.ulpWord[4],
 982                                         irsp->un.ulpWord[5],
 983                                         *(((uint32_t *) irsp) + 6),
 984                                         *(((uint32_t *) irsp) + 7));
 985                 }
 986
 987                 switch (type) {
 988                 case LPFC_ABORT_IOCB:
 989                 case LPFC_SOL_IOCB:
 990                         /*
 991                          * Idle exchange closed via ABTS from port.  No iocb
 992                          * resources need to be recovered.
 993                          */
 994                         if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
 995                                 printk(KERN_INFO "%s: IOCB cmd 0x%x processed."
 996                                        " Skipping completion\n", __FUNCTION__,
 997                                        irsp->ulpCommand);
 998                                 break;
 999                         }
1000
1001                         cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
1002                                                          &rspiocbq);
1003                         if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
1004                                 (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1005                                                       &rspiocbq);
1006                         }
1007                         break;
1008                 default:
1009                         if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1010                                 char adaptermsg[LPFC_MAX_ADPTMSG];
1011                                 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
1012                                 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1013                                        MAX_MSG_DATA);
1014                                 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
1015                                          phba->brd_no, adaptermsg);
1016                         } else {
1017                                 /* Unknown IOCB command */
1018                                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1019                                                 "%d:0321 Unknown IOCB command "
1020                                                 "Data: x%x, x%x x%x x%x x%x\n",
1021                                                 phba->brd_no, type,
1022                                                 irsp->ulpCommand,
1023                                                 irsp->ulpStatus,
1024                                                 irsp->ulpIoTag,
1025                                                 irsp->ulpContext);
1026                         }
1027                         break;
1028                 }
1029
1030                 /*
1031                  * The response IOCB has been processed.  Update the ring
1032                  * pointer in SLIM.  If the port response put pointer has not
1033                  * been updated, sync the pgp->rspPutInx and fetch the new port
1034                  * response put pointer.
1035                  */
1036                 to_slim = phba->MBslimaddr +
1037                         (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1038                 writeb(pring->rspidx, to_slim);
1039
1040                 if (pring->rspidx == portRspPut)
1041                         portRspPut = le32_to_cpu(pgp->rspPutInx);
1042         }
1043
1044         ha_copy = readl(phba->HAregaddr);
1045         ha_copy >>= (LPFC_FCP_RING * 4);
1046
1047         if ((rsp_cmpl > 0) && (ha_copy & HA_R0RE_REQ)) {
1048                 pring->stats.iocb_rsp_full++;
1049                 status = ((CA_R0ATT | CA_R0RE_RSP) << (LPFC_FCP_RING * 4));
1050                 writel(status, phba->CAregaddr);
1051                 readl(phba->CAregaddr);
1052         }
1053         if ((ha_copy & HA_R0CE_RSP) &&
1054             (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1055                 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1056                 pring->stats.iocb_cmd_empty++;
1057
1058                 /* Force update of the local copy of cmdGetInx */
1059                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1060                 lpfc_sli_resume_iocb(phba, pring);
1061
1062                 if ((pring->lpfc_sli_cmd_available))
1063                         (pring->lpfc_sli_cmd_available) (phba, pring);
1064
1065         }
1066
1067         return;
1068 }
1069
1070 /*
1071  * This routine presumes LPFC_FCP_RING handling and doesn't bother
1072  * to check it explicitly.
1073  */
1074 static int
1075 lpfc_sli_handle_fast_ring_event(struct lpfc_hba * phba,
1076                                 struct lpfc_sli_ring * pring, uint32_t mask)
1077 {
1078         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
1079         IOCB_t *irsp = NULL;
1080         IOCB_t *entry = NULL;
1081         struct lpfc_iocbq *cmdiocbq = NULL;
1082         struct lpfc_iocbq rspiocbq;
1083         uint32_t status;
1084         uint32_t portRspPut, portRspMax;
1085         int rc = 1;
1086         lpfc_iocb_type type;
1087         unsigned long iflag;
1088         uint32_t rsp_cmpl = 0;
1089         void __iomem  *to_slim;
1090
1091         spin_lock_irqsave(phba->host->host_lock, iflag);
1092         pring->stats.iocb_event++;
1093
1094         /*
1095          * The next available response entry should never exceed the maximum
1096          * entries.  If it does, treat it as an adapter hardware error.
1097          */
1098         portRspMax = pring->numRiocb;
1099         portRspPut = le32_to_cpu(pgp->rspPutInx);
1100         if (unlikely(portRspPut >= portRspMax)) {
1101                 lpfc_sli_rsp_pointers_error(phba, pring);
1102                 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1103                 return 1;
1104         }
1105
1106         rmb();
1107         while (pring->rspidx != portRspPut) {
1108                 /*
1109                  * Fetch an entry off the ring and copy it into a local data
1110                  * structure.  The copy involves a byte-swap since the
1111                  * network byte order and pci byte orders are different.
1112                  */
1113                 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1114
1115                 if (++pring->rspidx >= portRspMax)
1116                         pring->rspidx = 0;
1117
1118                 lpfc_sli_pcimem_bcopy((uint32_t *) entry,
1119                                       (uint32_t *) &rspiocbq.iocb,
1120                                       sizeof (IOCB_t));
1121                 irsp = &rspiocbq.iocb;
1122
1123                 type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
1124                 pring->stats.iocb_rsp++;
1125                 rsp_cmpl++;
1126
1127                 if (unlikely(irsp->ulpStatus)) {
1128                         /* Rsp ring <ringno> error: IOCB */
1129                         lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
1130                                 "%d:0326 Rsp Ring %d error: IOCB Data: "
1131                                 "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1132                                 phba->brd_no, pring->ringno,
1133                                 irsp->un.ulpWord[0], irsp->un.ulpWord[1],
1134                                 irsp->un.ulpWord[2], irsp->un.ulpWord[3],
1135                                 irsp->un.ulpWord[4], irsp->un.ulpWord[5],
1136                                 *(((uint32_t *) irsp) + 6),
1137                                 *(((uint32_t *) irsp) + 7));
1138                 }
1139
1140                 switch (type) {
1141                 case LPFC_ABORT_IOCB:
1142                 case LPFC_SOL_IOCB:
1143                         /*
1144                          * Idle exchange closed via ABTS from port.  No iocb
1145                          * resources need to be recovered.
1146                          */
1147                         if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
1148                                 printk(KERN_INFO "%s: IOCB cmd 0x%x processed. "
1149                                        "Skipping completion\n", __FUNCTION__,
1150                                        irsp->ulpCommand);
1151                                 break;
1152                         }
1153
1154                         cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
1155                                                          &rspiocbq);
1156                         if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
1157                                 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
1158                                         (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1159                                                               &rspiocbq);
1160                                 } else {
1161                                         spin_unlock_irqrestore(
1162                                                 phba->host->host_lock, iflag);
1163                                         (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
1164                                                               &rspiocbq);
1165                                         spin_lock_irqsave(phba->host->host_lock,
1166                                                           iflag);
1167                                 }
1168                         }
1169                         break;
1170                 default:
1171                         if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1172                                 char adaptermsg[LPFC_MAX_ADPTMSG];
1173                                 memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
1174                                 memcpy(&adaptermsg[0], (uint8_t *) irsp,
1175                                        MAX_MSG_DATA);
1176                                 dev_warn(&((phba->pcidev)->dev), "lpfc%d: %s",
1177                                          phba->brd_no, adaptermsg);
1178                         } else {
1179                                 /* Unknown IOCB command */
1180                                 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
1181                                         "%d:0321 Unknown IOCB command "
1182                                         "Data: x%x, x%x x%x x%x x%x\n",
1183                                         phba->brd_no, type, irsp->ulpCommand,
1184                                         irsp->ulpStatus, irsp->ulpIoTag,
1185                                         irsp->ulpContext);
1186                         }
1187                         break;
1188                 }
1189
1190                 /*
1191                  * The response IOCB has been processed.  Update the ring
1192                  * pointer in SLIM.  If the port response put pointer has not
1193                  * been updated, sync the pgp->rspPutInx and fetch the new port
1194                  * response put pointer.
1195                  */
1196                 to_slim = phba->MBslimaddr +
1197                         (SLIMOFF + (pring->ringno * 2) + 1) * 4;
1198                 writel(pring->rspidx, to_slim);
1199
1200                 if (pring->rspidx == portRspPut)
1201                         portRspPut = le32_to_cpu(pgp->rspPutInx);
1202         }
1203
1204         if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) {
1205                 pring->stats.iocb_rsp_full++;
1206                 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1207                 writel(status, phba->CAregaddr);
1208                 readl(phba->CAregaddr);
1209         }
1210         if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1211                 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1212                 pring->stats.iocb_cmd_empty++;
1213
1214                 /* Force update of the local copy of cmdGetInx */
1215                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1216                 lpfc_sli_resume_iocb(phba, pring);
1217
1218                 if ((pring->lpfc_sli_cmd_available))
1219                         (pring->lpfc_sli_cmd_available) (phba, pring);
1220
1221         }
1222
1223         spin_unlock_irqrestore(phba->host->host_lock, iflag);
1224         return rc;
1225 }
1226
1227
1228 int
1229 lpfc_sli_handle_slow_ring_event(struct lpfc_hba * phba,
1230                            struct lpfc_sli_ring * pring, uint32_t mask)
1231 {
1232         IOCB_t *entry;
1233         IOCB_t *irsp = NULL;
1234         struct lpfc_iocbq *rspiocbp = NULL;
1235         struct lpfc_iocbq *next_iocb;
1236         struct lpfc_iocbq *cmdiocbp;
1237         struct lpfc_iocbq *saveq;
1238         struct lpfc_pgp *pgp = &phba->slim2p->mbx.us.s2.port[pring->ringno];
1239         uint8_t iocb_cmd_type;
1240         lpfc_iocb_type type;
1241         uint32_t status, free_saveq;
1242         uint32_t portRspPut, portRspMax;
1243         int rc = 1;
1244         unsigned long iflag;
1245         void __iomem  *to_slim;
1246
1247         spin_lock_irqsave(phba->host->host_lock, iflag);
1248         pring->stats.iocb_event++;
1249
1250         /*
1251          * The next available response entry should never exceed the maximum
1252          * entries.  If it does, treat it as an adapter hardware error.
1253          */
1254         portRspMax = pring->numRiocb;
1255         portRspPut = le32_to_cpu(pgp->rspPutInx);
1256         if (portRspPut >= portRspMax) {
1257                 /*
1258                  * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
1259                  * rsp ring <portRspMax>
1260                  */
1261                 lpfc_printf_log(phba,
1262                                 KERN_ERR,
1263                                 LOG_SLI,
1264                                 "%d:0312 Ring %d handler: portRspPut %d "
1265                                 "is bigger then rsp ring %d\n",
1266                                 phba->brd_no,
1267                                 pring->ringno, portRspPut, portRspMax);
1268
1269                 phba->hba_state = LPFC_HBA_ERROR;
1270                 spin_unlock_irqrestore(phba->host->host_lock, iflag);
1271
1272                 phba->work_hs = HS_FFER3;
1273                 lpfc_handle_eratt(phba);
1274
1275                 return 1;
1276         }
1277
1278         rmb();
1279         while (pring->rspidx != portRspPut) {
1280                 /*
1281                  * Build a completion list and call the appropriate handler.
1282                  * The process is to get the next available response iocb, get
1283                  * a free iocb from the list, copy the response data into the
1284                  * free iocb, insert to the continuation list, and update the
1285                  * next response index to slim.  This process makes response
1286                  * iocb's in the ring available to DMA as fast as possible but
1287                  * pays a penalty for a copy operation.  Since the iocb is
1288                  * only 32 bytes, this penalty is considered small relative to
1289                  * the PCI reads for register values and a slim write.  When
1290                  * the ulpLe field is set, the entire Command has been
1291                  * received.
1292                  */
1293                 entry = IOCB_ENTRY(pring->rspringaddr, pring->rspidx);
1294                 rspiocbp = lpfc_sli_get_iocbq(phba);
1295                 if (rspiocbp == NULL) {
1296                         printk(KERN_ERR "%s: out of buffers! Failing "
1297                                "completion.\n", __FUNCTION__);
1298                         break;
1299                 }
1300
1301                 lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb, sizeof (IOCB_t));
1302                 irsp = &rspiocbp->iocb;
1303
1304                 if (++pring->rspidx >= portRspMax)
1305                         pring->rspidx = 0;
1306
1307                 to_slim = phba->MBslimaddr + (SLIMOFF + (pring->ringno * 2)
1308                                               + 1) * 4;
1309                 writel(pring->rspidx, to_slim);
1310
1311                 if (list_empty(&(pring->iocb_continueq))) {
1312                         list_add(&rspiocbp->list, &(pring->iocb_continueq));
1313                 } else {
1314                         list_add_tail(&rspiocbp->list,
1315                                       &(pring->iocb_continueq));
1316                 }
1317
1318                 pring->iocb_continueq_cnt++;
1319                 if (irsp->ulpLe) {
1320                         /*
1321                          * By default, the driver expects to free all resources
1322                          * associated with this iocb completion.
1323                          */
1324                         free_saveq = 1;
1325                         saveq = list_get_first(&pring->iocb_continueq,
1326                                                struct lpfc_iocbq, list);
1327                         irsp = &(saveq->iocb);
1328                         list_del_init(&pring->iocb_continueq);
1329                         pring->iocb_continueq_cnt = 0;
1330
1331                         pring->stats.iocb_rsp++;
1332
1333                         if (irsp->ulpStatus) {
1334                                 /* Rsp ring <ringno> error: IOCB */
1335                                 lpfc_printf_log(phba,
1336                                         KERN_WARNING,
1337                                         LOG_SLI,
1338                                         "%d:0328 Rsp Ring %d error: IOCB Data: "
1339                                         "x%x x%x x%x x%x x%x x%x x%x x%x\n",
1340                                         phba->brd_no,
1341                                         pring->ringno,
1342                                         irsp->un.ulpWord[0],
1343                                         irsp->un.ulpWord[1],
1344                                         irsp->un.ulpWord[2],
1345                                         irsp->un.ulpWord[3],
1346                                         irsp->un.ulpWord[4],
1347                                         irsp->un.ulpWord[5],
1348                                         *(((uint32_t *) irsp) + 6),
1349                                         *(((uint32_t *) irsp) + 7));
1350                         }
1351
1352                         /*
1353                          * Fetch the IOCB command type and call the correct
1354                          * completion routine.  Solicited and Unsolicited
1355                          * IOCBs on the ELS ring get freed back to the
1356                          * lpfc_iocb_list by the discovery kernel thread.
1357                          */
1358                         iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
1359                         type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
1360                         if (type == LPFC_SOL_IOCB) {
1361                                 spin_unlock_irqrestore(phba->host->host_lock,
1362                                                        iflag);
1363                                 rc = lpfc_sli_process_sol_iocb(phba, pring,
1364                                         saveq);
1365                                 spin_lock_irqsave(phba->host->host_lock, iflag);
1366                         } else if (type == LPFC_UNSOL_IOCB) {
1367                                 spin_unlock_irqrestore(phba->host->host_lock,
1368                                                        iflag);
1369                                 rc = lpfc_sli_process_unsol_iocb(phba, pring,
1370                                         saveq);
1371                                 spin_lock_irqsave(phba->host->host_lock, iflag);
1372                         } else if (type == LPFC_ABORT_IOCB) {
1373                                 if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
1374                                     ((cmdiocbp =
1375                                       lpfc_sli_iocbq_lookup(phba, pring,
1376                                                             saveq)))) {
1377                                         /* Call the specified completion
1378                                            routine */
1379                                         if (cmdiocbp->iocb_cmpl) {
1380                                                 spin_unlock_irqrestore(
1381                                                        phba->host->host_lock,
1382                                                        iflag);
1383                                                 (cmdiocbp->iocb_cmpl) (phba,
1384                                                              cmdiocbp, saveq);
1385                                                 spin_lock_irqsave(
1386                                                           phba->host->host_lock,
1387                                                           iflag);
1388                                         } else
1389                                                 lpfc_sli_release_iocbq(phba,
1390                                                                       cmdiocbp);
1391                                 }
1392                         } else if (type == LPFC_UNKNOWN_IOCB) {
1393                                 if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
1394
1395                                         char adaptermsg[LPFC_MAX_ADPTMSG];
1396
1397                                         memset(adaptermsg, 0,
1398                                                LPFC_MAX_ADPTMSG);
1399                                         memcpy(&adaptermsg[0], (uint8_t *) irsp,
1400                                                MAX_MSG_DATA);
1401                                         dev_warn(&((phba->pcidev)->dev),
1402                                                  "lpfc%d: %s",
1403                                                  phba->brd_no, adaptermsg);
1404                                 } else {
1405                                         /* Unknown IOCB command */
1406                                         lpfc_printf_log(phba,
1407                                                 KERN_ERR,
1408                                                 LOG_SLI,
1409                                                 "%d:0321 Unknown IOCB command "
1410                                                 "Data: x%x x%x x%x x%x\n",
1411                                                 phba->brd_no,
1412                                                 irsp->ulpCommand,
1413                                                 irsp->ulpStatus,
1414                                                 irsp->ulpIoTag,
1415                                                 irsp->ulpContext);
1416                                 }
1417                         }
1418
1419                         if (free_saveq) {
1420                                 if (!list_empty(&saveq->list)) {
1421                                         list_for_each_entry_safe(rspiocbp,
1422                                                                  next_iocb,
1423                                                                  &saveq->list,
1424                                                                  list) {
1425                                                 lpfc_sli_release_iocbq(phba,
1426                                                                      rspiocbp);
1427                                         }
1428                                 }
1429
1430                                 lpfc_sli_release_iocbq(phba, saveq);
1431                         }
1432                 }
1433
1434                 /*
1435                  * If the port response put pointer has not been updated, sync
1436                  * the pgp->rspPutInx in the MAILBOX_tand fetch the new port
1437                  * response put pointer.
1438                  */
1439                 if (pring->rspidx == portRspPut) {
1440                         portRspPut = le32_to_cpu(pgp->rspPutInx);
1441                 }
1442         } /* while (pring->rspidx != portRspPut) */
1443
1444         if ((rspiocbp != 0) && (mask & HA_R0RE_REQ)) {
1445                 /* At least one response entry has been freed */
1446                 pring->stats.iocb_rsp_full++;
1447                 /* SET RxRE_RSP in Chip Att register */
1448                 status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
1449                 writel(status, phba->CAregaddr);
1450                 readl(phba->CAregaddr); /* flush */
1451         }
1452         if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
1453                 pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
1454                 pring->stats.iocb_cmd_empty++;
1455
1456                 /* Force update of the local copy of cmdGetInx */
1457                 pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
1458                 lpfc_sli_resume_iocb(phba, pring);
1459
1460                 if ((pring->lpfc_sli_cmd_available))
1461                         (pring->lpfc_sli_cmd_available) (phba, pring);
1462
1463         }
1464
1465         spin_unlock_irqrestore(phba->host->host_lock, iflag);
1466         return rc;
1467 }
1468
1469 int
1470 lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
1471 {
1472         struct lpfc_iocbq *iocb, *next_iocb;
1473         IOCB_t *icmd = NULL, *cmd = NULL;
1474         int errcnt;
1475
1476         errcnt = 0;
1477
1478         /* Error everything on txq and txcmplq
1479          * First do the txq.
1480          */
1481         spin_lock_irq(phba->host->host_lock);
1482         list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
1483                 list_del_init(&iocb->list);
1484                 if (iocb->iocb_cmpl) {
1485                         icmd = &iocb->iocb;
1486                         icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1487                         icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1488                         spin_unlock_irq(phba->host->host_lock);
1489                         (iocb->iocb_cmpl) (phba, iocb, iocb);
1490                         spin_lock_irq(phba->host->host_lock);
1491                 } else
1492                         lpfc_sli_release_iocbq(phba, iocb);
1493         }
1494         pring->txq_cnt = 0;
1495         INIT_LIST_HEAD(&(pring->txq));
1496
1497         /* Next issue ABTS for everything on the txcmplq */
1498         list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
1499                 cmd = &iocb->iocb;
1500
1501                 /*
1502                  * Imediate abort of IOCB, deque and call compl
1503                  */
1504
1505                 list_del_init(&iocb->list);
1506                 pring->txcmplq_cnt--;
1507
1508                 if (iocb->iocb_cmpl) {
1509                         cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
1510                         cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
1511                         spin_unlock_irq(phba->host->host_lock);
1512                         (iocb->iocb_cmpl) (phba, iocb, iocb);
1513                         spin_lock_irq(phba->host->host_lock);
1514                 } else
1515                         lpfc_sli_release_iocbq(phba, iocb);
1516         }
1517
1518         INIT_LIST_HEAD(&pring->txcmplq);
1519         pring->txcmplq_cnt = 0;
1520         spin_unlock_irq(phba->host->host_lock);
1521
1522         return errcnt;
1523 }
1524
1525 int
1526 lpfc_sli_brdready(struct lpfc_hba * phba, uint32_t mask)
1527 {
1528         uint32_t status;
1529         int i = 0;
1530         int retval = 0;
1531
1532         /* Read the HBA Host Status Register */
1533         status = readl(phba->HSregaddr);
1534
1535         /*
1536          * Check status register every 100ms for 5 retries, then every
1537          * 500ms for 5, then every 2.5 sec for 5, then reset board and
1538          * every 2.5 sec for 4.
1539          * Break our of the loop if errors occurred during init.
1540          */
1541         while (((status & mask) != mask) &&
1542                !(status & HS_FFERM) &&
1543                i++ < 20) {
1544
1545                 if (i <= 5)
1546                         msleep(10);
1547                 else if (i <= 10)
1548                         msleep(500);
1549                 else
1550                         msleep(2500);
1551
1552                 if (i == 15) {
1553                         phba->hba_state = LPFC_STATE_UNKNOWN; /* Do post */
1554                         lpfc_sli_brdrestart(phba);
1555                 }
1556                 /* Read the HBA Host Status Register */
1557                 status = readl(phba->HSregaddr);
1558         }
1559
1560         /* Check to see if any errors occurred during init */
1561         if ((status & HS_FFERM) || (i >= 20)) {
1562                 phba->hba_state = LPFC_HBA_ERROR;
1563                 retval = 1;
1564         }
1565
1566         return retval;
1567 }
1568
1569 #define BARRIER_TEST_PATTERN (0xdeadbeef)
1570
1571 void lpfc_reset_barrier(struct lpfc_hba * phba)
1572 {
1573         uint32_t * resp_buf;
1574         uint32_t * mbox_buf;
1575         volatile uint32_t mbox;
1576         uint32_t hc_copy;
1577         int  i;
1578         uint8_t hdrtype;
1579
1580         pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
1581         if (hdrtype != 0x80 ||
1582             (FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID &&
1583              FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID))
1584                 return;
1585
1586         /*
1587          * Tell the other part of the chip to suspend temporarily all
1588          * its DMA activity.
1589          */
1590         resp_buf =  (uint32_t *)phba->MBslimaddr;
1591
1592         /* Disable the error attention */
1593         hc_copy = readl(phba->HCregaddr);
1594         writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
1595         readl(phba->HCregaddr); /* flush */
1596
1597         if (readl(phba->HAregaddr) & HA_ERATT) {
1598                 /* Clear Chip error bit */
1599                 writel(HA_ERATT, phba->HAregaddr);
1600                 phba->stopped = 1;
1601         }
1602
1603         mbox = 0;
1604         ((MAILBOX_t *)&mbox)->mbxCommand = MBX_KILL_BOARD;
1605         ((MAILBOX_t *)&mbox)->mbxOwner = OWN_CHIP;
1606
1607         writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
1608         mbox_buf = (uint32_t *)phba->MBslimaddr;
1609         writel(mbox, mbox_buf);
1610
1611         for (i = 0;
1612              readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN) && i < 50; i++)
1613                 mdelay(1);
1614
1615         if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
1616                 if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
1617                     phba->stopped)
1618                         goto restore_hc;
1619                 else
1620                         goto clear_errat;
1621         }
1622
1623         ((MAILBOX_t *)&mbox)->mbxOwner = OWN_HOST;
1624         for (i = 0; readl(resp_buf) != mbox &&  i < 500; i++)
1625                 mdelay(1);
1626
1627 clear_errat:
1628
1629         while (!(readl(phba->HAregaddr) & HA_ERATT) && ++i < 500)
1630                 mdelay(1);
1631
1632         if (readl(phba->HAregaddr) & HA_ERATT) {
1633                 writel(HA_ERATT, phba->HAregaddr);
1634                 phba->stopped = 1;
1635         }
1636
1637 restore_hc:
1638         writel(hc_copy, phba->HCregaddr);
1639         readl(phba->HCregaddr); /* flush */
1640 }
1641
1642 int
1643 lpfc_sli_brdkill(struct lpfc_hba * phba)
1644 {
1645         struct lpfc_sli *psli;
1646         LPFC_MBOXQ_t *pmb;
1647         uint32_t status;
1648         uint32_t ha_copy;
1649         int retval;
1650         int i = 0;
1651
1652         psli = &phba->sli;
1653
1654         /* Kill HBA */
1655         lpfc_printf_log(phba,
1656                 KERN_INFO,
1657                 LOG_SLI,
1658                 "%d:0329 Kill HBA Data: x%x x%x\n",
1659                 phba->brd_no,
1660                 phba->hba_state,
1661                 psli->sli_flag);
1662
1663         if ((pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
1664                                                   GFP_KERNEL)) == 0)
1665                 return 1;
1666
1667         /* Disable the error attention */
1668         spin_lock_irq(phba->host->host_lock);
1669         status = readl(phba->HCregaddr);
1670         status &= ~HC_ERINT_ENA;
1671         writel(status, phba->HCregaddr);
1672         readl(phba->HCregaddr); /* flush */
1673         spin_unlock_irq(phba->host->host_lock);
1674
1675         lpfc_kill_board(phba, pmb);
1676         pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
1677         retval = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
1678
1679         if (retval != MBX_SUCCESS) {
1680                 if (retval != MBX_BUSY)
1681                         mempool_free(pmb, phba->mbox_mem_pool);
1682                 return 1;
1683         }
1684
1685         psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
1686
1687         mempool_free(pmb, phba->mbox_mem_pool);
1688
1689         /* There is no completion for a KILL_BOARD mbox cmd. Check for an error
1690          * attention every 100ms for 3 seconds. If we don't get ERATT after
1691          * 3 seconds we still set HBA_ERROR state because the status of the
1692          * board is now undefined.
1693          */
1694         ha_copy = readl(phba->HAregaddr);
1695
1696         while ((i++ < 30) && !(ha_copy & HA_ERATT)) {
1697                 mdelay(100);
1698                 ha_copy = readl(phba->HAregaddr);
1699         }
1700
1701         del_timer_sync(&psli->mbox_tmo);
1702         if (ha_copy & HA_ERATT) {
1703                 writel(HA_ERATT, phba->HAregaddr);
1704                 phba->stopped = 1;
1705         }
1706         spin_lock_irq(phba->host->host_lock);
1707         psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
1708         spin_unlock_irq(phba->host->host_lock);
1709
1710         psli->mbox_active = NULL;
1711         lpfc_hba_down_post(phba);
1712         phba->hba_state = LPFC_HBA_ERROR;
1713
1714         return (ha_copy & HA_ERATT ? 0 : 1);
1715 }
1716
1717 int
1718 lpfc_sli_brdreset(struct lpfc_hba * phba)
1719 {
1720         struct lpfc_sli *psli;
1721         struct lpfc_sli_ring *pring;
1722         uint16_t cfg_value;
1723         int i;
1724
1725         psli = &phba->sli;
1726
1727         /* Reset HBA */
1728         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1729                         "%d:0325 Reset HBA Data: x%x x%x\n", phba->brd_no,
1730                         phba->hba_state, psli->sli_flag);
1731
1732         /* perform board reset */
1733         phba->fc_eventTag = 0;
1734         phba->fc_myDID = 0;
1735         phba->fc_prevDID = 0;
1736
1737         psli->sli_flag = 0;
1738
1739         /* Turn off parity checking and serr during the physical reset */
1740         pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
1741         pci_write_config_word(phba->pcidev, PCI_COMMAND,
1742                               (cfg_value &
1743                                ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
1744
1745         psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
1746         /* Now toggle INITFF bit in the Host Control Register */
1747         writel(HC_INITFF, phba->HCregaddr);
1748         mdelay(1);
1749         readl(phba->HCregaddr); /* flush */
1750         writel(0, phba->HCregaddr);
1751         readl(phba->HCregaddr); /* flush */
1752
1753         /* Restore PCI cmd register */
1754         pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
1755
1756         /* Initialize relevant SLI info */
1757         for (i = 0; i < psli->num_rings; i++) {
1758                 pring = &psli->ring[i];
1759                 pring->flag = 0;
1760                 pring->rspidx = 0;
1761                 pring->next_cmdidx  = 0;
1762                 pring->local_getidx = 0;
1763                 pring->cmdidx = 0;
1764                 pring->missbufcnt = 0;
1765         }
1766
1767         phba->hba_state = LPFC_WARM_START;
1768         return 0;
1769 }
1770
1771 int
1772 lpfc_sli_brdrestart(struct lpfc_hba * phba)
1773 {
1774         MAILBOX_t *mb;
1775         struct lpfc_sli *psli;
1776         uint16_t skip_post;
1777         volatile uint32_t word0;
1778         void __iomem *to_slim;
1779
1780         spin_lock_irq(phba->host->host_lock);
1781
1782         psli = &phba->sli;
1783
1784         /* Restart HBA */
1785         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
1786                         "%d:0328 Restart HBA Data: x%x x%x\n", phba->brd_no,
1787                         phba->hba_state, psli->sli_flag);
1788
1789         word0 = 0;
1790         mb = (MAILBOX_t *) &word0;
1791         mb->mbxCommand = MBX_RESTART;
1792         mb->mbxHc = 1;
1793
1794         lpfc_reset_barrier(phba);
1795
1796         to_slim = phba->MBslimaddr;
1797         writel(*(uint32_t *) mb, to_slim);
1798         readl(to_slim); /* flush */
1799
1800         /* Only skip post after fc_ffinit is completed */
1801         if (phba->hba_state) {
1802                 skip_post = 1;
1803                 word0 = 1;      /* This is really setting up word1 */
1804         } else {
1805                 skip_post = 0;
1806                 word0 = 0;      /* This is really setting up word1 */
1807         }
1808         to_slim = (uint8_t *) phba->MBslimaddr + sizeof (uint32_t);
1809         writel(*(uint32_t *) mb, to_slim);
1810         readl(to_slim); /* flush */
1811
1812         lpfc_sli_brdreset(phba);
1813         phba->stopped = 0;
1814         phba->hba_state = LPFC_INIT_START;
1815
1816         spin_unlock_irq(phba->host->host_lock);
1817
1818         if (skip_post)
1819                 mdelay(100);
1820         else
1821                 mdelay(2000);
1822
1823         lpfc_hba_down_post(phba);
1824
1825         return 0;
1826 }
1827
1828 static int
1829 lpfc_sli_chipset_init(struct lpfc_hba *phba)
1830 {
1831         uint32_t status, i = 0;
1832
1833         /* Read the HBA Host Status Register */
1834         status = readl(phba->HSregaddr);
1835
1836         /* Check status register to see what current state is */
1837         i = 0;
1838         while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
1839
1840                 /* Check every 100ms for 5 retries, then every 500ms for 5, then
1841                  * every 2.5 sec for 5, then reset board and every 2.5 sec for
1842                  * 4.
1843                  */
1844                 if (i++ >= 20) {
1845                         /* Adapter failed to init, timeout, status reg
1846                            <status> */
1847                         lpfc_printf_log(phba,
1848                                         KERN_ERR,
1849                                         LOG_INIT,
1850                                         "%d:0436 Adapter failed to init, "
1851                                         "timeout, status reg x%x\n",
1852                                         phba->brd_no,
1853                                         status);
1854                         phba->hba_state = LPFC_HBA_ERROR;
1855                         return -ETIMEDOUT;
1856                 }
1857
1858                 /* Check to see if any errors occurred during init */
1859                 if (status & HS_FFERM) {
1860                         /* ERROR: During chipset initialization */
1861                         /* Adapter failed to init, chipset, status reg
1862                            <status> */
1863                         lpfc_printf_log(phba,
1864                                         KERN_ERR,
1865                                         LOG_INIT,
1866                                         "%d:0437 Adapter failed to init, "
1867                                         "chipset, status reg x%x\n",
1868                                         phba->brd_no,
1869                                         status);
1870                         phba->hba_state = LPFC_HBA_ERROR;
1871                         return -EIO;
1872                 }
1873
1874                 if (i <= 5) {
1875                         msleep(10);
1876                 } else if (i <= 10) {
1877                         msleep(500);
1878                 } else {
1879                         msleep(2500);
1880                 }
1881
1882                 if (i == 15) {
1883                         phba->hba_state = LPFC_STATE_UNKNOWN; /* Do post */
1884                         lpfc_sli_brdrestart(phba);
1885                 }
1886                 /* Read the HBA Host Status Register */
1887                 status = readl(phba->HSregaddr);
1888         }
1889
1890         /* Check to see if any errors occurred during init */
1891         if (status & HS_FFERM) {
1892                 /* ERROR: During chipset initialization */
1893                 /* Adapter failed to init, chipset, status reg <status> */
1894                 lpfc_printf_log(phba,
1895                                 KERN_ERR,
1896                                 LOG_INIT,
1897                                 "%d:0438 Adapter failed to init, chipset, "
1898                                 "status reg x%x\n",
1899                                 phba->brd_no,
1900                                 status);
1901                 phba->hba_state = LPFC_HBA_ERROR;
1902                 return -EIO;
1903         }
1904
1905         /* Clear all interrupt enable conditions */
1906         writel(0, phba->HCregaddr);
1907         readl(phba->HCregaddr); /* flush */
1908
1909         /* setup host attn register */
1910         writel(0xffffffff, phba->HAregaddr);
1911         readl(phba->HAregaddr); /* flush */
1912         return 0;
1913 }
1914
1915 int
1916 lpfc_sli_hba_setup(struct lpfc_hba * phba)
1917 {
1918         LPFC_MBOXQ_t *pmb;
1919         uint32_t resetcount = 0, rc = 0, done = 0;
1920
1921         pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1922         if (!pmb) {
1923                 phba->hba_state = LPFC_HBA_ERROR;
1924                 return -ENOMEM;
1925         }
1926
1927         while (resetcount < 2 && !done) {
1928                 phba->hba_state = LPFC_STATE_UNKNOWN;
1929                 lpfc_sli_brdrestart(phba);
1930                 msleep(2500);
1931                 rc = lpfc_sli_chipset_init(phba);
1932                 if (rc)
1933                         break;
1934
1935                 resetcount++;
1936
1937         /* Call pre CONFIG_PORT mailbox command initialization.  A value of 0
1938          * means the call was successful.  Any other nonzero value is a failure,
1939          * but if ERESTART is returned, the driver may reset the HBA and try
1940          * again.
1941          */
1942                 rc = lpfc_config_port_prep(phba);
1943                 if (rc == -ERESTART) {
1944                         phba->hba_state = 0;
1945                         continue;
1946                 } else if (rc) {
1947                         break;
1948                 }
1949
1950                 phba->hba_state = LPFC_INIT_MBX_CMDS;
1951                 lpfc_config_port(phba, pmb);
1952                 rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
1953                 if (rc == MBX_SUCCESS)
1954                         done = 1;
1955                 else {
1956                         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
1957                                 "%d:0442 Adapter failed to init, mbxCmd x%x "
1958                                 "CONFIG_PORT, mbxStatus x%x Data: x%x\n",
1959                                 phba->brd_no, pmb->mb.mbxCommand,
1960                                 pmb->mb.mbxStatus, 0);
1961                         phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
1962                 }
1963         }
1964         if (!done)
1965                 goto lpfc_sli_hba_setup_error;
1966
1967         rc = lpfc_sli_ring_map(phba, pmb);
1968
1969         if (rc)
1970                 goto lpfc_sli_hba_setup_error;
1971
1972         phba->sli.sli_flag |= LPFC_PROCESS_LA;
1973
1974         rc = lpfc_config_port_post(phba);
1975         if (rc)
1976                 goto lpfc_sli_hba_setup_error;
1977
1978         goto lpfc_sli_hba_setup_exit;
1979 lpfc_sli_hba_setup_error:
1980         phba->hba_state = LPFC_HBA_ERROR;
1981 lpfc_sli_hba_setup_exit:
1982         mempool_free(pmb, phba->mbox_mem_pool);
1983         return rc;
1984 }
1985
1986 static void
1987 lpfc_mbox_abort(struct lpfc_hba * phba)
1988 {
1989         LPFC_MBOXQ_t *pmbox;
1990         MAILBOX_t *mb;
1991
1992         if (phba->sli.mbox_active) {
1993                 del_timer_sync(&phba->sli.mbox_tmo);
1994                 phba->work_hba_events &= ~WORKER_MBOX_TMO;
1995                 pmbox = phba->sli.mbox_active;
1996                 mb = &pmbox->mb;
1997                 phba->sli.mbox_active = NULL;
1998                 if (pmbox->mbox_cmpl) {
1999                         mb->mbxStatus = MBX_NOT_FINISHED;
2000                         (pmbox->mbox_cmpl) (phba, pmbox);
2001                 }
2002                 phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2003         }
2004
2005         /* Abort all the non active mailbox commands. */
2006         spin_lock_irq(phba->host->host_lock);
2007         pmbox = lpfc_mbox_get(phba);
2008         while (pmbox) {
2009                 mb = &pmbox->mb;
2010                 if (pmbox->mbox_cmpl) {
2011                         mb->mbxStatus = MBX_NOT_FINISHED;
2012                         spin_unlock_irq(phba->host->host_lock);
2013                         (pmbox->mbox_cmpl) (phba, pmbox);
2014                         spin_lock_irq(phba->host->host_lock);
2015                 }
2016                 pmbox = lpfc_mbox_get(phba);
2017         }
2018         spin_unlock_irq(phba->host->host_lock);
2019         return;
2020 }
2021
2022 /*! lpfc_mbox_timeout
2023  *
2024  * \pre
2025  * \post
2026  * \param hba Pointer to per struct lpfc_hba structure
2027  * \param l1  Pointer to the driver's mailbox queue.
2028  * \return
2029  *   void
2030  *
2031  * \b Description:
2032  *
2033  * This routine handles mailbox timeout events at timer interrupt context.
2034  */
2035 void
2036 lpfc_mbox_timeout(unsigned long ptr)
2037 {
2038         struct lpfc_hba *phba;
2039         unsigned long iflag;
2040
2041         phba = (struct lpfc_hba *)ptr;
2042         spin_lock_irqsave(phba->host->host_lock, iflag);
2043         if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
2044                 phba->work_hba_events |= WORKER_MBOX_TMO;
2045                 if (phba->work_wait)
2046                         wake_up(phba->work_wait);
2047         }
2048         spin_unlock_irqrestore(phba->host->host_lock, iflag);
2049 }
2050
2051 void
2052 lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
2053 {
2054         LPFC_MBOXQ_t *pmbox;
2055         MAILBOX_t *mb;
2056
2057         spin_lock_irq(phba->host->host_lock);
2058         if (!(phba->work_hba_events & WORKER_MBOX_TMO)) {
2059                 spin_unlock_irq(phba->host->host_lock);
2060                 return;
2061         }
2062
2063         phba->work_hba_events &= ~WORKER_MBOX_TMO;
2064
2065         pmbox = phba->sli.mbox_active;
2066         mb = &pmbox->mb;
2067
2068         /* Mbox cmd <mbxCommand> timeout */
2069         lpfc_printf_log(phba,
2070                 KERN_ERR,
2071                 LOG_MBOX | LOG_SLI,
2072                 "%d:0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
2073                 phba->brd_no,
2074                 mb->mbxCommand,
2075                 phba->hba_state,
2076                 phba->sli.sli_flag,
2077                 phba->sli.mbox_active);
2078
2079         phba->sli.mbox_active = NULL;
2080         if (pmbox->mbox_cmpl) {
2081                 mb->mbxStatus = MBX_NOT_FINISHED;
2082                 spin_unlock_irq(phba->host->host_lock);
2083                 (pmbox->mbox_cmpl) (phba, pmbox);
2084                 spin_lock_irq(phba->host->host_lock);
2085         }
2086         phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2087
2088         spin_unlock_irq(phba->host->host_lock);
2089         lpfc_mbox_abort(phba);
2090         return;
2091 }
2092
2093 int
2094 lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
2095 {
2096         MAILBOX_t *mb;
2097         struct lpfc_sli *psli;
2098         uint32_t status, evtctr;
2099         uint32_t ha_copy;
2100         int i;
2101         unsigned long drvr_flag = 0;
2102         volatile uint32_t word0, ldata;
2103         void __iomem *to_slim;
2104
2105         psli = &phba->sli;
2106
2107         spin_lock_irqsave(phba->host->host_lock, drvr_flag);
2108
2109
2110         mb = &pmbox->mb;
2111         status = MBX_SUCCESS;
2112
2113         if (phba->hba_state == LPFC_HBA_ERROR) {
2114                 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2115
2116                 /* Mbox command <mbxCommand> cannot issue */
2117                 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2118                 return (MBX_NOT_FINISHED);
2119         }
2120
2121         if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
2122             !(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
2123                 spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2124                 LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2125                 return (MBX_NOT_FINISHED);
2126         }
2127
2128         if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
2129                 /* Polling for a mbox command when another one is already active
2130                  * is not allowed in SLI. Also, the driver must have established
2131                  * SLI2 mode to queue and process multiple mbox commands.
2132                  */
2133
2134                 if (flag & MBX_POLL) {
2135                         spin_unlock_irqrestore(phba->host->host_lock,
2136                                                drvr_flag);
2137
2138                         /* Mbox command <mbxCommand> cannot issue */
2139                         LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2140                         return (MBX_NOT_FINISHED);
2141                 }
2142
2143                 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
2144                         spin_unlock_irqrestore(phba->host->host_lock,
2145                                                drvr_flag);
2146                         /* Mbox command <mbxCommand> cannot issue */
2147                         LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag)
2148                         return (MBX_NOT_FINISHED);
2149                 }
2150
2151                 /* Handle STOP IOCB processing flag. This is only meaningful
2152                  * if we are not polling for mbox completion.
2153                  */
2154                 if (flag & MBX_STOP_IOCB) {
2155                         flag &= ~MBX_STOP_IOCB;
2156                         /* Now flag each ring */
2157                         for (i = 0; i < psli->num_rings; i++) {
2158                                 /* If the ring is active, flag it */
2159                                 if (psli->ring[i].cmdringaddr) {
2160                                         psli->ring[i].flag |=
2161                                             LPFC_STOP_IOCB_MBX;
2162                                 }
2163                         }
2164                 }
2165
2166                 /* Another mailbox command is still being processed, queue this
2167                  * command to be processed later.
2168                  */
2169                 lpfc_mbox_put(phba, pmbox);
2170
2171                 /* Mbox cmd issue - BUSY */
2172                 lpfc_printf_log(phba,
2173                         KERN_INFO,
2174                         LOG_MBOX | LOG_SLI,
2175                         "%d:0308 Mbox cmd issue - BUSY Data: x%x x%x x%x x%x\n",
2176                         phba->brd_no,
2177                         mb->mbxCommand,
2178                         phba->hba_state,
2179                         psli->sli_flag,
2180                         flag);
2181
2182                 psli->slistat.mbox_busy++;
2183                 spin_unlock_irqrestore(phba->host->host_lock,
2184                                        drvr_flag);
2185
2186                 return (MBX_BUSY);
2187         }
2188
2189         /* Handle STOP IOCB processing flag. This is only meaningful
2190          * if we are not polling for mbox completion.
2191          */
2192         if (flag & MBX_STOP_IOCB) {
2193                 flag &= ~MBX_STOP_IOCB;
2194                 if (flag == MBX_NOWAIT) {
2195                         /* Now flag each ring */
2196                         for (i = 0; i < psli->num_rings; i++) {
2197                                 /* If the ring is active, flag it */
2198                                 if (psli->ring[i].cmdringaddr) {
2199                                         psli->ring[i].flag |=
2200                                             LPFC_STOP_IOCB_MBX;
2201                                 }
2202                         }
2203                 }
2204         }
2205
2206         psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
2207
2208         /* If we are not polling, we MUST be in SLI2 mode */
2209         if (flag != MBX_POLL) {
2210                 if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
2211                     (mb->mbxCommand != MBX_KILL_BOARD)) {
2212                         psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2213                         spin_unlock_irqrestore(phba->host->host_lock,
2214                                                drvr_flag);
2215                         /* Mbox command <mbxCommand> cannot issue */
2216                         LOG_MBOX_CANNOT_ISSUE_DATA( phba, mb, psli, flag);
2217                         return (MBX_NOT_FINISHED);
2218                 }
2219                 /* timeout active mbox command */
2220                 mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO);
2221         }
2222
2223         /* Mailbox cmd <cmd> issue */
2224         lpfc_printf_log(phba,
2225                 KERN_INFO,
2226                 LOG_MBOX | LOG_SLI,
2227                 "%d:0309 Mailbox cmd x%x issue Data: x%x x%x x%x\n",
2228                 phba->brd_no,
2229                 mb->mbxCommand,
2230                 phba->hba_state,
2231                 psli->sli_flag,
2232                 flag);
2233
2234         psli->slistat.mbox_cmd++;
2235         evtctr = psli->slistat.mbox_event;
2236
2237         /* next set own bit for the adapter and copy over command word */
2238         mb->mbxOwner = OWN_CHIP;
2239
2240         if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2241                 /* First copy command data to host SLIM area */
2242                 lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx, MAILBOX_CMD_SIZE);
2243         } else {
2244                 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2245                         /* copy command data into host mbox for cmpl */
2246                         lpfc_sli_pcimem_bcopy(mb, &phba->slim2p->mbx,
2247                                         MAILBOX_CMD_SIZE);
2248                 }
2249
2250                 /* First copy mbox command data to HBA SLIM, skip past first
2251                    word */
2252                 to_slim = phba->MBslimaddr + sizeof (uint32_t);
2253                 lpfc_memcpy_to_slim(to_slim, &mb->un.varWords[0],
2254                             MAILBOX_CMD_SIZE - sizeof (uint32_t));
2255
2256                 /* Next copy over first word, with mbxOwner set */
2257                 ldata = *((volatile uint32_t *)mb);
2258                 to_slim = phba->MBslimaddr;
2259                 writel(ldata, to_slim);
2260                 readl(to_slim); /* flush */
2261
2262                 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2263                         /* switch over to host mailbox */
2264                         psli->sli_flag |= LPFC_SLI2_ACTIVE;
2265                 }
2266         }
2267
2268         wmb();
2269         /* interrupt board to doit right away */
2270         writel(CA_MBATT, phba->CAregaddr);
2271         readl(phba->CAregaddr); /* flush */
2272
2273         switch (flag) {
2274         case MBX_NOWAIT:
2275                 /* Don't wait for it to finish, just return */
2276                 psli->mbox_active = pmbox;
2277                 break;
2278
2279         case MBX_POLL:
2280                 i = 0;
2281                 psli->mbox_active = NULL;
2282                 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2283                         /* First read mbox status word */
2284                         word0 = *((volatile uint32_t *)&phba->slim2p->mbx);
2285                         word0 = le32_to_cpu(word0);
2286                 } else {
2287                         /* First read mbox status word */
2288                         word0 = readl(phba->MBslimaddr);
2289                 }
2290
2291                 /* Read the HBA Host Attention Register */
2292                 ha_copy = readl(phba->HAregaddr);
2293
2294                 /* Wait for command to complete */
2295                 while (((word0 & OWN_CHIP) == OWN_CHIP) ||
2296                        (!(ha_copy & HA_MBATT) &&
2297                         (phba->hba_state > LPFC_WARM_START))) {
2298                         if (i++ >= 100) {
2299                                 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2300                                 spin_unlock_irqrestore(phba->host->host_lock,
2301                                                        drvr_flag);
2302                                 return (MBX_NOT_FINISHED);
2303                         }
2304
2305                         /* Check if we took a mbox interrupt while we were
2306                            polling */
2307                         if (((word0 & OWN_CHIP) != OWN_CHIP)
2308                             && (evtctr != psli->slistat.mbox_event))
2309                                 break;
2310
2311                         spin_unlock_irqrestore(phba->host->host_lock,
2312                                                drvr_flag);
2313
2314                         /* Can be in interrupt context, do not sleep */
2315                         /* (or might be called with interrupts disabled) */
2316                         mdelay(i);
2317
2318                         spin_lock_irqsave(phba->host->host_lock, drvr_flag);
2319
2320                         if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2321                                 /* First copy command data */
2322                                 word0 = *((volatile uint32_t *)
2323                                                 &phba->slim2p->mbx);
2324                                 word0 = le32_to_cpu(word0);
2325                                 if (mb->mbxCommand == MBX_CONFIG_PORT) {
2326                                         MAILBOX_t *slimmb;
2327                                         volatile uint32_t slimword0;
2328                                         /* Check real SLIM for any errors */
2329                                         slimword0 = readl(phba->MBslimaddr);
2330                                         slimmb = (MAILBOX_t *) & slimword0;
2331                                         if (((slimword0 & OWN_CHIP) != OWN_CHIP)
2332                                             && slimmb->mbxStatus) {
2333                                                 psli->sli_flag &=
2334                                                     ~LPFC_SLI2_ACTIVE;
2335                                                 word0 = slimword0;
2336                                         }
2337                                 }
2338                         } else {
2339                                 /* First copy command data */
2340                                 word0 = readl(phba->MBslimaddr);
2341                         }
2342                         /* Read the HBA Host Attention Register */
2343                         ha_copy = readl(phba->HAregaddr);
2344                 }
2345
2346                 if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
2347                         /* copy results back to user */
2348                         lpfc_sli_pcimem_bcopy(&phba->slim2p->mbx, mb,
2349                                         MAILBOX_CMD_SIZE);
2350                 } else {
2351                         /* First copy command data */
2352                         lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
2353                                                         MAILBOX_CMD_SIZE);
2354                         if ((mb->mbxCommand == MBX_DUMP_MEMORY) &&
2355                                 pmbox->context2) {
2356                                 lpfc_memcpy_from_slim((void *)pmbox->context2,
2357                                       phba->MBslimaddr + DMP_RSP_OFFSET,
2358                                                       mb->un.varDmp.word_cnt);
2359                         }
2360                 }
2361
2362                 writel(HA_MBATT, phba->HAregaddr);
2363                 readl(phba->HAregaddr); /* flush */
2364
2365                 psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2366                 status = mb->mbxStatus;
2367         }
2368
2369         spin_unlock_irqrestore(phba->host->host_lock, drvr_flag);
2370         return (status);
2371 }
2372
2373 static int
2374 lpfc_sli_ringtx_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2375                     struct lpfc_iocbq * piocb)
2376 {
2377         /* Insert the caller's iocb in the txq tail for later processing. */
2378         list_add_tail(&piocb->list, &pring->txq);
2379         pring->txq_cnt++;
2380         return (0);
2381 }
2382
2383 static struct lpfc_iocbq *
2384 lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2385                    struct lpfc_iocbq ** piocb)
2386 {
2387         struct lpfc_iocbq * nextiocb;
2388
2389         nextiocb = lpfc_sli_ringtx_get(phba, pring);
2390         if (!nextiocb) {
2391                 nextiocb = *piocb;
2392                 *piocb = NULL;
2393         }
2394
2395         return nextiocb;
2396 }
2397
2398 int
2399 lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2400                     struct lpfc_iocbq *piocb, uint32_t flag)
2401 {
2402         struct lpfc_iocbq *nextiocb;
2403         IOCB_t *iocb;
2404
2405         /*
2406          * We should never get an IOCB if we are in a < LINK_DOWN state
2407          */
2408         if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
2409                 return IOCB_ERROR;
2410
2411         /*
2412          * Check to see if we are blocking IOCB processing because of a
2413          * outstanding mbox command.
2414          */
2415         if (unlikely(pring->flag & LPFC_STOP_IOCB_MBX))
2416                 goto iocb_busy;
2417
2418         if (unlikely(phba->hba_state == LPFC_LINK_DOWN)) {
2419                 /*
2420                  * Only CREATE_XRI, CLOSE_XRI, ABORT_XRI, and QUE_RING_BUF
2421                  * can be issued if the link is not up.
2422                  */
2423                 switch (piocb->iocb.ulpCommand) {
2424                 case CMD_QUE_RING_BUF_CN:
2425                 case CMD_QUE_RING_BUF64_CN:
2426                         /*
2427                          * For IOCBs, like QUE_RING_BUF, that have no rsp ring
2428                          * completion, iocb_cmpl MUST be 0.
2429                          */
2430                         if (piocb->iocb_cmpl)
2431                                 piocb->iocb_cmpl = NULL;
2432                         /*FALLTHROUGH*/
2433                 case CMD_CREATE_XRI_CR:
2434                         break;
2435                 default:
2436                         goto iocb_busy;
2437                 }
2438
2439         /*
2440          * For FCP commands, we must be in a state where we can process link
2441          * attention events.
2442          */
2443         } else if (unlikely(pring->ringno == phba->sli.fcp_ring &&
2444                    !(phba->sli.sli_flag & LPFC_PROCESS_LA)))
2445                 goto iocb_busy;
2446
2447         while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
2448                (nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb)))
2449                 lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
2450
2451         if (iocb)
2452                 lpfc_sli_update_ring(phba, pring);
2453         else
2454                 lpfc_sli_update_full_ring(phba, pring);
2455
2456         if (!piocb)
2457                 return IOCB_SUCCESS;
2458
2459         goto out_busy;
2460
2461  iocb_busy:
2462         pring->stats.iocb_cmd_delay++;
2463
2464  out_busy:
2465
2466         if (!(flag & SLI_IOCB_RET_IOCB)) {
2467                 lpfc_sli_ringtx_put(phba, pring, piocb);
2468                 return IOCB_SUCCESS;
2469         }
2470
2471         return IOCB_BUSY;
2472 }
2473
2474 static int
2475 lpfc_extra_ring_setup( struct lpfc_hba *phba)
2476 {
2477         struct lpfc_sli *psli;
2478         struct lpfc_sli_ring *pring;
2479
2480         psli = &phba->sli;
2481
2482         /* Adjust cmd/rsp ring iocb entries more evenly */
2483         pring = &psli->ring[psli->fcp_ring];
2484         pring->numCiocb -= SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2485         pring->numRiocb -= SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2486         pring->numCiocb -= SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2487         pring->numRiocb -= SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2488
2489         pring = &psli->ring[1];
2490         pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2491         pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2492         pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2493         pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2494
2495         /* Setup default profile for this ring */
2496         pring->iotag_max = 4096;
2497         pring->num_mask = 1;
2498         pring->prt[0].profile = 0;      /* Mask 0 */
2499         pring->prt[0].rctl = FC_UNSOL_DATA;
2500         pring->prt[0].type = 5;
2501         pring->prt[0].lpfc_sli_rcv_unsol_event = NULL;
2502         return 0;
2503 }
2504
2505 int
2506 lpfc_sli_setup(struct lpfc_hba *phba)
2507 {
2508         int i, totiocb = 0;
2509         struct lpfc_sli *psli = &phba->sli;
2510         struct lpfc_sli_ring *pring;
2511
2512         psli->num_rings = MAX_CONFIGURED_RINGS;
2513         psli->sli_flag = 0;
2514         psli->fcp_ring = LPFC_FCP_RING;
2515         psli->next_ring = LPFC_FCP_NEXT_RING;
2516         psli->ip_ring = LPFC_IP_RING;
2517
2518         psli->iocbq_lookup = NULL;
2519         psli->iocbq_lookup_len = 0;
2520         psli->last_iotag = 0;
2521
2522         for (i = 0; i < psli->num_rings; i++) {
2523                 pring = &psli->ring[i];
2524                 switch (i) {
2525                 case LPFC_FCP_RING:     /* ring 0 - FCP */
2526                         /* numCiocb and numRiocb are used in config_port */
2527                         pring->numCiocb = SLI2_IOCB_CMD_R0_ENTRIES;
2528                         pring->numRiocb = SLI2_IOCB_RSP_R0_ENTRIES;
2529                         pring->numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
2530                         pring->numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
2531                         pring->numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
2532                         pring->numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
2533                         pring->iotag_ctr = 0;
2534                         pring->iotag_max =
2535                             (phba->cfg_hba_queue_depth * 2);
2536                         pring->fast_iotag = pring->iotag_max;
2537                         pring->num_mask = 0;
2538                         break;
2539                 case LPFC_IP_RING:      /* ring 1 - IP */
2540                         /* numCiocb and numRiocb are used in config_port */
2541                         pring->numCiocb = SLI2_IOCB_CMD_R1_ENTRIES;
2542                         pring->numRiocb = SLI2_IOCB_RSP_R1_ENTRIES;
2543                         pring->num_mask = 0;
2544                         break;
2545                 case LPFC_ELS_RING:     /* ring 2 - ELS / CT */
2546                         /* numCiocb and numRiocb are used in config_port */
2547                         pring->numCiocb = SLI2_IOCB_CMD_R2_ENTRIES;
2548                         pring->numRiocb = SLI2_IOCB_RSP_R2_ENTRIES;
2549                         pring->fast_iotag = 0;
2550                         pring->iotag_ctr = 0;
2551                         pring->iotag_max = 4096;
2552                         pring->num_mask = 4;
2553                         pring->prt[0].profile = 0;      /* Mask 0 */
2554                         pring->prt[0].rctl = FC_ELS_REQ;
2555                         pring->prt[0].type = FC_ELS_DATA;
2556                         pring->prt[0].lpfc_sli_rcv_unsol_event =
2557                             lpfc_els_unsol_event;
2558                         pring->prt[1].profile = 0;      /* Mask 1 */
2559                         pring->prt[1].rctl = FC_ELS_RSP;
2560                         pring->prt[1].type = FC_ELS_DATA;
2561                         pring->prt[1].lpfc_sli_rcv_unsol_event =
2562                             lpfc_els_unsol_event;
2563                         pring->prt[2].profile = 0;      /* Mask 2 */
2564                         /* NameServer Inquiry */
2565                         pring->prt[2].rctl = FC_UNSOL_CTL;
2566                         /* NameServer */
2567                         pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
2568                         pring->prt[2].lpfc_sli_rcv_unsol_event =
2569                             lpfc_ct_unsol_event;
2570                         pring->prt[3].profile = 0;      /* Mask 3 */
2571                         /* NameServer response */
2572                         pring->prt[3].rctl = FC_SOL_CTL;
2573                         /* NameServer */
2574                         pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
2575                         pring->prt[3].lpfc_sli_rcv_unsol_event =
2576                             lpfc_ct_unsol_event;
2577                         break;
2578                 }
2579                 totiocb += (pring->numCiocb + pring->numRiocb);
2580         }
2581         if (totiocb > MAX_SLI2_IOCB) {
2582                 /* Too many cmd / rsp ring entries in SLI2 SLIM */
2583                 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2584                                 "%d:0462 Too many cmd / rsp ring entries in "
2585                                 "SLI2 SLIM Data: x%x x%x\n",
2586                                 phba->brd_no, totiocb, MAX_SLI2_IOCB);
2587         }
2588         if (phba->cfg_multi_ring_support == 2)
2589                 lpfc_extra_ring_setup(phba);
2590
2591         return 0;
2592 }
2593
2594 int
2595 lpfc_sli_queue_setup(struct lpfc_hba * phba)
2596 {
2597         struct lpfc_sli *psli;
2598         struct lpfc_sli_ring *pring;
2599         int i;
2600
2601         psli = &phba->sli;
2602         spin_lock_irq(phba->host->host_lock);
2603         INIT_LIST_HEAD(&psli->mboxq);
2604         /* Initialize list headers for txq and txcmplq as double linked lists */
2605         for (i = 0; i < psli->num_rings; i++) {
2606                 pring = &psli->ring[i];
2607                 pring->ringno = i;
2608                 pring->next_cmdidx  = 0;
2609                 pring->local_getidx = 0;
2610                 pring->cmdidx = 0;
2611                 INIT_LIST_HEAD(&pring->txq);
2612                 INIT_LIST_HEAD(&pring->txcmplq);
2613                 INIT_LIST_HEAD(&pring->iocb_continueq);
2614                 INIT_LIST_HEAD(&pring->postbufq);
2615         }
2616         spin_unlock_irq(phba->host->host_lock);
2617         return (1);
2618 }
2619
2620 int
2621 lpfc_sli_hba_down(struct lpfc_hba * phba)
2622 {
2623         struct lpfc_sli *psli;
2624         struct lpfc_sli_ring *pring;
2625         LPFC_MBOXQ_t *pmb;
2626         struct lpfc_iocbq *iocb, *next_iocb;
2627         IOCB_t *icmd = NULL;
2628         int i;
2629         unsigned long flags = 0;
2630
2631         psli = &phba->sli;
2632         lpfc_hba_down_prep(phba);
2633
2634         spin_lock_irqsave(phba->host->host_lock, flags);
2635
2636         for (i = 0; i < psli->num_rings; i++) {
2637                 pring = &psli->ring[i];
2638                 pring->flag |= LPFC_DEFERRED_RING_EVENT;
2639
2640                 /*
2641                  * Error everything on the txq since these iocbs have not been
2642                  * given to the FW yet.
2643                  */
2644                 pring->txq_cnt = 0;
2645
2646                 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
2647                         list_del_init(&iocb->list);
2648                         if (iocb->iocb_cmpl) {
2649                                 icmd = &iocb->iocb;
2650                                 icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
2651                                 icmd->un.ulpWord[4] = IOERR_SLI_DOWN;
2652                                 spin_unlock_irqrestore(phba->host->host_lock,
2653                                                        flags);
2654                                 (iocb->iocb_cmpl) (phba, iocb, iocb);
2655                                 spin_lock_irqsave(phba->host->host_lock, flags);
2656                         } else
2657                                 lpfc_sli_release_iocbq(phba, iocb);
2658                 }
2659
2660                 INIT_LIST_HEAD(&(pring->txq));
2661
2662                 kfree(pring->fast_lookup);
2663                 pring->fast_lookup = NULL;
2664         }
2665
2666         spin_unlock_irqrestore(phba->host->host_lock, flags);
2667
2668         /* Return any active mbox cmds */
2669         del_timer_sync(&psli->mbox_tmo);
2670         spin_lock_irqsave(phba->host->host_lock, flags);
2671         phba->work_hba_events &= ~WORKER_MBOX_TMO;
2672         if (psli->mbox_active) {
2673                 pmb = psli->mbox_active;
2674                 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2675                 if (pmb->mbox_cmpl) {
2676                         spin_unlock_irqrestore(phba->host->host_lock, flags);
2677                         pmb->mbox_cmpl(phba,pmb);
2678                         spin_lock_irqsave(phba->host->host_lock, flags);
2679                 }
2680         }
2681         psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
2682         psli->mbox_active = NULL;
2683
2684         /* Return any pending mbox cmds */
2685         while ((pmb = lpfc_mbox_get(phba)) != NULL) {
2686                 pmb->mb.mbxStatus = MBX_NOT_FINISHED;
2687                 if (pmb->mbox_cmpl) {
2688                         spin_unlock_irqrestore(phba->host->host_lock, flags);
2689                         pmb->mbox_cmpl(phba,pmb);
2690                         spin_lock_irqsave(phba->host->host_lock, flags);
2691                 }
2692         }
2693
2694         INIT_LIST_HEAD(&psli->mboxq);
2695
2696         spin_unlock_irqrestore(phba->host->host_lock, flags);
2697
2698         return 1;
2699 }
2700
2701 void
2702 lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
2703 {
2704         uint32_t *src = srcp;
2705         uint32_t *dest = destp;
2706         uint32_t ldata;
2707         int i;
2708
2709         for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) {
2710                 ldata = *src;
2711                 ldata = le32_to_cpu(ldata);
2712                 *dest = ldata;
2713                 src++;
2714                 dest++;
2715         }
2716 }
2717
2718 int
2719 lpfc_sli_ringpostbuf_put(struct lpfc_hba * phba, struct lpfc_sli_ring * pring,
2720                          struct lpfc_dmabuf * mp)
2721 {
2722         /* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up
2723            later */
2724         list_add_tail(&mp->list, &pring->postbufq);
2725
2726         pring->postbufq_cnt++;
2727         return 0;
2728 }
2729
2730
2731 struct lpfc_dmabuf *
2732 lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2733                          dma_addr_t phys)
2734 {
2735         struct lpfc_dmabuf *mp, *next_mp;
2736         struct list_head *slp = &pring->postbufq;
2737
2738         /* Search postbufq, from the begining, looking for a match on phys */
2739         list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
2740                 if (mp->phys == phys) {
2741                         list_del_init(&mp->list);
2742                         pring->postbufq_cnt--;
2743                         return mp;
2744                 }
2745         }
2746
2747         lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
2748                         "%d:0410 Cannot find virtual addr for mapped buf on "
2749                         "ring %d Data x%llx x%p x%p x%x\n",
2750                         phba->brd_no, pring->ringno, (unsigned long long)phys,
2751                         slp->next, slp->prev, pring->postbufq_cnt);
2752         return NULL;
2753 }
2754
2755 static void
2756 lpfc_sli_abort_elsreq_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2757                            struct lpfc_iocbq * rspiocb)
2758 {
2759         struct lpfc_dmabuf *buf_ptr, *buf_ptr1;
2760         /* Free the resources associated with the ELS_REQUEST64 IOCB the driver
2761          * just aborted.
2762          * In this case, context2  = cmd,  context2->next = rsp, context3 = bpl
2763          */
2764         if (cmdiocb->context2) {
2765                 buf_ptr1 = (struct lpfc_dmabuf *) cmdiocb->context2;
2766
2767                 /* Free the response IOCB before completing the abort
2768                    command.  */
2769                 buf_ptr = NULL;
2770                 list_remove_head((&buf_ptr1->list), buf_ptr,
2771                                  struct lpfc_dmabuf, list);
2772                 if (buf_ptr) {
2773                         lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
2774                         kfree(buf_ptr);
2775                 }
2776                 lpfc_mbuf_free(phba, buf_ptr1->virt, buf_ptr1->phys);
2777                 kfree(buf_ptr1);
2778         }
2779
2780         if (cmdiocb->context3) {
2781                 buf_ptr = (struct lpfc_dmabuf *) cmdiocb->context3;
2782                 lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
2783                 kfree(buf_ptr);
2784         }
2785
2786         lpfc_sli_release_iocbq(phba, cmdiocb);
2787         return;
2788 }
2789
2790 int
2791 lpfc_sli_issue_abort_iotag32(struct lpfc_hba * phba,
2792                              struct lpfc_sli_ring * pring,
2793                              struct lpfc_iocbq * cmdiocb)
2794 {
2795         struct lpfc_iocbq *abtsiocbp;
2796         IOCB_t *icmd = NULL;
2797         IOCB_t *iabt = NULL;
2798
2799         /* issue ABTS for this IOCB based on iotag */
2800         abtsiocbp = lpfc_sli_get_iocbq(phba);
2801         if (abtsiocbp == NULL)
2802                 return 0;
2803
2804         iabt = &abtsiocbp->iocb;
2805         icmd = &cmdiocb->iocb;
2806         switch (icmd->ulpCommand) {
2807         case CMD_ELS_REQUEST64_CR:
2808                 /* Even though we abort the ELS command, the firmware may access
2809                  * the BPL or other resources before it processes our
2810                  * ABORT_MXRI64. Thus we must delay reusing the cmdiocb
2811                  * resources till the actual abort request completes.
2812                  */
2813                 abtsiocbp->context1 = (void *)((unsigned long)icmd->ulpCommand);
2814                 abtsiocbp->context2 = cmdiocb->context2;
2815                 abtsiocbp->context3 = cmdiocb->context3;
2816                 cmdiocb->context2 = NULL;
2817                 cmdiocb->context3 = NULL;
2818                 abtsiocbp->iocb_cmpl = lpfc_sli_abort_elsreq_cmpl;
2819                 break;
2820         default:
2821                 lpfc_sli_release_iocbq(phba, abtsiocbp);
2822                 return 0;
2823         }
2824
2825         iabt->un.amxri.abortType = ABORT_TYPE_ABTS;
2826         iabt->un.amxri.iotag32 = icmd->un.elsreq64.bdl.ulpIoTag32;
2827
2828         iabt->ulpLe = 1;
2829         iabt->ulpClass = CLASS3;
2830         iabt->ulpCommand = CMD_ABORT_MXRI64_CN;
2831
2832         if (lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0) == IOCB_ERROR) {
2833                 lpfc_sli_release_iocbq(phba, abtsiocbp);
2834                 return 0;
2835         }
2836
2837         return 1;
2838 }
2839
2840 static int
2841 lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, uint16_t tgt_id,
2842                            uint64_t lun_id, uint32_t ctx,
2843                            lpfc_ctx_cmd ctx_cmd)
2844 {
2845         struct lpfc_scsi_buf *lpfc_cmd;
2846         struct scsi_cmnd *cmnd;
2847         int rc = 1;
2848
2849         if (!(iocbq->iocb_flag &  LPFC_IO_FCP))
2850                 return rc;
2851
2852         lpfc_cmd = container_of(iocbq, struct lpfc_scsi_buf, cur_iocbq);
2853         cmnd = lpfc_cmd->pCmd;
2854
2855         if (cmnd == NULL)
2856                 return rc;
2857
2858         switch (ctx_cmd) {
2859         case LPFC_CTX_LUN:
2860                 if ((cmnd->device->id == tgt_id) &&
2861                     (cmnd->device->lun == lun_id))
2862                         rc = 0;
2863                 break;
2864         case LPFC_CTX_TGT:
2865                 if (cmnd->device->id == tgt_id)
2866                         rc = 0;
2867                 break;
2868         case LPFC_CTX_CTX:
2869                 if (iocbq->iocb.ulpContext == ctx)
2870                         rc = 0;
2871                 break;
2872         case LPFC_CTX_HOST:
2873                 rc = 0;
2874                 break;
2875         default:
2876                 printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
2877                         __FUNCTION__, ctx_cmd);
2878                 break;
2879         }
2880
2881         return rc;
2882 }
2883
2884 int
2885 lpfc_sli_sum_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2886                 uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd ctx_cmd)
2887 {
2888         struct lpfc_iocbq *iocbq;
2889         int sum, i;
2890
2891         for (i = 1, sum = 0; i <= phba->sli.last_iotag; i++) {
2892                 iocbq = phba->sli.iocbq_lookup[i];
2893
2894                 if (lpfc_sli_validate_fcp_iocb (iocbq, tgt_id, lun_id,
2895                                                 0, ctx_cmd) == 0)
2896                         sum++;
2897         }
2898
2899         return sum;
2900 }
2901
2902 void
2903 lpfc_sli_abort_fcp_cmpl(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
2904                            struct lpfc_iocbq * rspiocb)
2905 {
2906         spin_lock_irq(phba->host->host_lock);
2907         lpfc_sli_release_iocbq(phba, cmdiocb);
2908         spin_unlock_irq(phba->host->host_lock);
2909         return;
2910 }
2911
2912 int
2913 lpfc_sli_abort_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
2914                     uint16_t tgt_id, uint64_t lun_id, uint32_t ctx,
2915                     lpfc_ctx_cmd abort_cmd)
2916 {
2917         struct lpfc_iocbq *iocbq;
2918         struct lpfc_iocbq *abtsiocb;
2919         IOCB_t *cmd = NULL;
2920         int errcnt = 0, ret_val = 0;
2921         int i;
2922
2923         for (i = 1; i <= phba->sli.last_iotag; i++) {
2924                 iocbq = phba->sli.iocbq_lookup[i];
2925
2926                 if (lpfc_sli_validate_fcp_iocb (iocbq, tgt_id, lun_id,
2927                                                 0, abort_cmd) != 0)
2928                         continue;
2929
2930                 /* issue ABTS for this IOCB based on iotag */
2931                 abtsiocb = lpfc_sli_get_iocbq(phba);
2932                 if (abtsiocb == NULL) {
2933                         errcnt++;
2934                         continue;
2935                 }
2936
2937                 cmd = &iocbq->iocb;
2938                 abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
2939                 abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
2940                 abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
2941                 abtsiocb->iocb.ulpLe = 1;
2942                 abtsiocb->iocb.ulpClass = cmd->ulpClass;
2943
2944                 if (phba->hba_state >= LPFC_LINK_UP)
2945                         abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
2946                 else
2947                         abtsiocb->iocb.ulpCommand = CMD_CLOSE_XRI_CN;
2948
2949                 /* Setup callback routine and issue the command. */
2950                 abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
2951                 ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
2952                 if (ret_val == IOCB_ERROR) {
2953                         lpfc_sli_release_iocbq(phba, abtsiocb);
2954                         errcnt++;
2955                         continue;
2956                 }
2957         }
2958
2959         return errcnt;
2960 }
2961
2962 static void
2963 lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
2964                         struct lpfc_iocbq *cmdiocbq,
2965                         struct lpfc_iocbq *rspiocbq)
2966 {
2967         wait_queue_head_t *pdone_q;
2968         unsigned long iflags;
2969
2970         spin_lock_irqsave(phba->host->host_lock, iflags);
2971         cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
2972         if (cmdiocbq->context2 && rspiocbq)
2973                 memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
2974                        &rspiocbq->iocb, sizeof(IOCB_t));
2975
2976         pdone_q = cmdiocbq->context_un.wait_queue;
2977         spin_unlock_irqrestore(phba->host->host_lock, iflags);
2978         if (pdone_q)
2979                 wake_up(pdone_q);
2980         return;
2981 }
2982
2983 /*
2984  * Issue the caller's iocb and wait for its completion, but no longer than the
2985  * caller's timeout.  Note that iocb_flags is cleared before the
2986  * lpfc_sli_issue_call since the wake routine sets a unique value and by
2987  * definition this is a wait function.
2988  */
2989 int
2990 lpfc_sli_issue_iocb_wait(struct lpfc_hba * phba,
2991                          struct lpfc_sli_ring * pring,
2992                          struct lpfc_iocbq * piocb,
2993                          struct lpfc_iocbq * prspiocbq,
2994                          uint32_t timeout)
2995 {
2996         DECLARE_WAIT_QUEUE_HEAD(done_q);
2997         long timeleft, timeout_req = 0;
2998         int retval = IOCB_SUCCESS;
2999         uint32_t creg_val;
3000
3001         /*
3002          * If the caller has provided a response iocbq buffer, then context2
3003          * is NULL or its an error.
3004          */
3005         if (prspiocbq) {
3006                 if (piocb->context2)
3007                         return IOCB_ERROR;
3008                 piocb->context2 = prspiocbq;
3009         }
3010
3011         piocb->iocb_cmpl = lpfc_sli_wake_iocb_wait;
3012         piocb->context_un.wait_queue = &done_q;
3013         piocb->iocb_flag &= ~LPFC_IO_WAKE;
3014
3015         if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
3016                 creg_val = readl(phba->HCregaddr);
3017                 creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
3018                 writel(creg_val, phba->HCregaddr);
3019                 readl(phba->HCregaddr); /* flush */
3020         }
3021
3022         retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
3023         if (retval == IOCB_SUCCESS) {
3024                 timeout_req = timeout * HZ;
3025                 spin_unlock_irq(phba->host->host_lock);
3026                 timeleft = wait_event_timeout(done_q,
3027                                 piocb->iocb_flag & LPFC_IO_WAKE,
3028                                 timeout_req);
3029                 spin_lock_irq(phba->host->host_lock);
3030
3031                 if (timeleft == 0) {
3032                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3033                                         "%d:0329 IOCB wait timeout error - no "
3034                                         "wake response Data x%x\n",
3035                                         phba->brd_no, timeout);
3036                         retval = IOCB_TIMEDOUT;
3037                 } else if (!(piocb->iocb_flag & LPFC_IO_WAKE)) {
3038                         lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
3039                                         "%d:0330 IOCB wake NOT set, "
3040                                         "Data x%x x%lx\n", phba->brd_no,
3041                                         timeout, (timeleft / jiffies));
3042                         retval = IOCB_TIMEDOUT;
3043                 } else {
3044                         lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3045                                         "%d:0331 IOCB wake signaled\n",
3046                                         phba->brd_no);
3047                 }
3048         } else {
3049                 lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
3050                                 "%d:0332 IOCB wait issue failed, Data x%x\n",
3051                                 phba->brd_no, retval);
3052                 retval = IOCB_ERROR;
3053         }
3054
3055         if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
3056                 creg_val = readl(phba->HCregaddr);
3057                 creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
3058                 writel(creg_val, phba->HCregaddr);
3059                 readl(phba->HCregaddr); /* flush */
3060         }
3061
3062         if (prspiocbq)
3063                 piocb->context2 = NULL;
3064
3065         piocb->context_un.wait_queue = NULL;
3066         piocb->iocb_cmpl = NULL;
3067         return retval;
3068 }
3069
3070 int
3071 lpfc_sli_issue_mbox_wait(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq,
3072                          uint32_t timeout)
3073 {
3074         DECLARE_WAIT_QUEUE_HEAD(done_q);
3075         DECLARE_WAITQUEUE(wq_entry, current);
3076         uint32_t timeleft = 0;
3077         int retval;
3078
3079         /* The caller must leave context1 empty. */
3080         if (pmboxq->context1 != 0) {
3081                 return (MBX_NOT_FINISHED);
3082         }
3083
3084         /* setup wake call as IOCB callback */
3085         pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
3086         /* setup context field to pass wait_queue pointer to wake function  */
3087         pmboxq->context1 = &done_q;
3088
3089         /* start to sleep before we wait, to avoid races */
3090         set_current_state(TASK_INTERRUPTIBLE);
3091         add_wait_queue(&done_q, &wq_entry);
3092
3093         /* now issue the command */
3094         retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
3095
3096         if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
3097                 timeleft = schedule_timeout(timeout * HZ);
3098                 pmboxq->context1 = NULL;
3099                 /* if schedule_timeout returns 0, we timed out and were not
3100                    woken up */
3101                 if ((timeleft == 0) || signal_pending(current))
3102                         retval = MBX_TIMEOUT;
3103                 else
3104                         retval = MBX_SUCCESS;
3105         }
3106
3107
3108         set_current_state(TASK_RUNNING);
3109         remove_wait_queue(&done_q, &wq_entry);
3110         return retval;
3111 }
3112
3113 irqreturn_t
3114 lpfc_intr_handler(int irq, void *dev_id, struct pt_regs * regs)
3115 {
3116         struct lpfc_hba *phba;
3117         uint32_t ha_copy;
3118         uint32_t work_ha_copy;
3119         unsigned long status;
3120         int i;
3121         uint32_t control;
3122
3123         /*
3124          * Get the driver's phba structure from the dev_id and
3125          * assume the HBA is not interrupting.
3126          */
3127         phba = (struct lpfc_hba *) dev_id;
3128
3129         if (unlikely(!phba))
3130                 return IRQ_NONE;
3131
3132         phba->sli.slistat.sli_intr++;
3133
3134         /*
3135          * Call the HBA to see if it is interrupting.  If not, don't claim
3136          * the interrupt
3137          */
3138
3139         /* Ignore all interrupts during initialization. */
3140         if (unlikely(phba->hba_state < LPFC_LINK_DOWN))
3141                 return IRQ_NONE;
3142
3143         /*
3144          * Read host attention register to determine interrupt source
3145          * Clear Attention Sources, except Error Attention (to
3146          * preserve status) and Link Attention
3147          */
3148         spin_lock(phba->host->host_lock);
3149         ha_copy = readl(phba->HAregaddr);
3150         writel((ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
3151         readl(phba->HAregaddr); /* flush */
3152         spin_unlock(phba->host->host_lock);
3153
3154         if (unlikely(!ha_copy))
3155                 return IRQ_NONE;
3156
3157         work_ha_copy = ha_copy & phba->work_ha_mask;
3158
3159         if (unlikely(work_ha_copy)) {
3160                 if (work_ha_copy & HA_LATT) {
3161                         if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
3162                                 /*
3163                                  * Turn off Link Attention interrupts
3164                                  * until CLEAR_LA done
3165                                  */
3166                                 spin_lock(phba->host->host_lock);
3167                                 phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
3168                                 control = readl(phba->HCregaddr);
3169                                 control &= ~HC_LAINT_ENA;
3170                                 writel(control, phba->HCregaddr);
3171                                 readl(phba->HCregaddr); /* flush */
3172                                 spin_unlock(phba->host->host_lock);
3173                         }
3174                         else
3175                                 work_ha_copy &= ~HA_LATT;
3176                 }
3177
3178                 if (work_ha_copy & ~(HA_ERATT|HA_MBATT|HA_LATT)) {
3179                         for (i = 0; i < phba->sli.num_rings; i++) {
3180                                 if (work_ha_copy & (HA_RXATT << (4*i))) {
3181                                         /*
3182                                          * Turn off Slow Rings interrupts
3183                                          */
3184                                         spin_lock(phba->host->host_lock);
3185                                         control = readl(phba->HCregaddr);
3186                                         control &= ~(HC_R0INT_ENA << i);
3187                                         writel(control, phba->HCregaddr);
3188                                         readl(phba->HCregaddr); /* flush */
3189                                         spin_unlock(phba->host->host_lock);
3190                                 }
3191                         }
3192                 }
3193
3194                 if (work_ha_copy & HA_ERATT) {
3195                         phba->hba_state = LPFC_HBA_ERROR;
3196                         /*
3197                          * There was a link/board error.  Read the
3198                          * status register to retrieve the error event
3199                          * and process it.
3200                          */
3201                         phba->sli.slistat.err_attn_event++;
3202                         /* Save status info */
3203                         phba->work_hs = readl(phba->HSregaddr);
3204                         phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
3205                         phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
3206
3207                         /* Clear Chip error bit */
3208                         writel(HA_ERATT, phba->HAregaddr);
3209                         readl(phba->HAregaddr); /* flush */
3210                         phba->stopped = 1;
3211                 }
3212
3213                 spin_lock(phba->host->host_lock);
3214                 phba->work_ha |= work_ha_copy;
3215                 if (phba->work_wait)
3216                         wake_up(phba->work_wait);
3217                 spin_unlock(phba->host->host_lock);
3218         }
3219
3220         ha_copy &= ~(phba->work_ha_mask);
3221
3222         /*
3223          * Process all events on FCP ring.  Take the optimized path for
3224          * FCP IO.  Any other IO is slow path and is handled by
3225          * the worker thread.
3226          */
3227         status = (ha_copy & (HA_RXMASK  << (4*LPFC_FCP_RING)));
3228         status >>= (4*LPFC_FCP_RING);
3229         if (status & HA_RXATT)
3230                 lpfc_sli_handle_fast_ring_event(phba,
3231                                                 &phba->sli.ring[LPFC_FCP_RING],
3232                                                 status);
3233         return IRQ_HANDLED;
3234
3235 } /* lpfc_intr_handler */