git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/pvrusb2/pvrusb2-encoder.c

   1 /*
   2  *
   3  *  $Id$
   4  *
   5  *  Copyright (C) 2005 Mike Isely <isely@pobox.com>
   6  *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License as published by
  10  *  the Free Software Foundation; either version 2 of the License
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *  GNU General Public License for more details.
  16  *
  17  *  You should have received a copy of the GNU General Public License
  18  *  along with this program; if not, write to the Free Software
  19  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  *
  21  */
  22
  23 #include <linux/device.h>   // for linux/firmware.h
  24 #include <linux/firmware.h>
  25 #include "pvrusb2-util.h"
  26 #include "pvrusb2-encoder.h"
  27 #include "pvrusb2-hdw-internal.h"
  28 #include "pvrusb2-debug.h"
  29 #include "pvrusb2-fx2-cmd.h"
  30
  31
  32
  33 /* Firmware mailbox flags - definitions found from ivtv */
  34 #define IVTV_MBOX_FIRMWARE_DONE 0x00000004
  35 #define IVTV_MBOX_DRIVER_DONE 0x00000002
  36 #define IVTV_MBOX_DRIVER_BUSY 0x00000001
  37
  38 #define MBOX_BASE 0x44
  39
  40
  41 static int pvr2_encoder_write_words(struct pvr2_hdw *hdw,
  42                                     unsigned int offs,
  43                                     const u32 *data, unsigned int dlen)
  44 {
  45         unsigned int idx,addr;
  46         unsigned int bAddr;
  47         int ret;
  48         unsigned int chunkCnt;
  49
  50         /*
  51
  52         Format: First byte must be 0x01.  Remaining 32 bit words are
  53         spread out into chunks of 7 bytes each, with the first 4 bytes
  54         being the data word (little endian), and the next 3 bytes
  55         being the address where that data word is to be written (big
  56         endian).  Repeat request for additional words, with offset
  57         adjusted accordingly.
  58
  59         */
  60         while (dlen) {
  61                 chunkCnt = 8;
  62                 if (chunkCnt > dlen) chunkCnt = dlen;
  63                 memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
  64                 bAddr = 0;
  65                 hdw->cmd_buffer[bAddr++] = FX2CMD_MEM_WRITE_DWORD;
  66                 for (idx = 0; idx < chunkCnt; idx++) {
  67                         addr = idx + offs;
  68                         hdw->cmd_buffer[bAddr+6] = (addr & 0xffu);
  69                         hdw->cmd_buffer[bAddr+5] = ((addr>>8) & 0xffu);
  70                         hdw->cmd_buffer[bAddr+4] = ((addr>>16) & 0xffu);
  71                         PVR2_DECOMPOSE_LE(hdw->cmd_buffer, bAddr,data[idx]);
  72                         bAddr += 7;
  73                 }
  74                 ret = pvr2_send_request(hdw,
  75                                         hdw->cmd_buffer,1+(chunkCnt*7),
  76                                         NULL,0);
  77                 if (ret) return ret;
  78                 data += chunkCnt;
  79                 dlen -= chunkCnt;
  80                 offs += chunkCnt;
  81         }
  82
  83         return 0;
  84 }
  85
  86
  87 static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,
  88                                    unsigned int offs,
  89                                    u32 *data, unsigned int dlen)
  90 {
  91         unsigned int idx;
  92         int ret;
  93         unsigned int chunkCnt;
  94
  95         /*
  96
  97         Format: First byte must be 0x02 (status check) or 0x28 (read
  98         back block of 32 bit words).  Next 6 bytes must be zero,
  99         followed by a single byte of MBOX_BASE+offset for portion to
 100         be read.  Returned data is packed set of 32 bits words that
 101         were read.
 102
 103         */
 104
 105         while (dlen) {
 106                 chunkCnt = 16;
 107                 if (chunkCnt > dlen) chunkCnt = dlen;
 108                 if (chunkCnt < 16) chunkCnt = 1;
 109                 hdw->cmd_buffer[0] =
 110                         ((chunkCnt == 1) ?
 111                          FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
 112                 hdw->cmd_buffer[1] = 0;
 113                 hdw->cmd_buffer[2] = 0;
 114                 hdw->cmd_buffer[3] = 0;
 115                 hdw->cmd_buffer[4] = 0;
 116                 hdw->cmd_buffer[5] = ((offs>>16) & 0xffu);
 117                 hdw->cmd_buffer[6] = ((offs>>8) & 0xffu);
 118                 hdw->cmd_buffer[7] = (offs & 0xffu);
 119                 ret = pvr2_send_request(hdw,
 120                                         hdw->cmd_buffer,8,
 121                                         hdw->cmd_buffer,
 122                                         (chunkCnt == 1 ? 4 : 16 * 4));
 123                 if (ret) return ret;
 124
 125                 for (idx = 0; idx < chunkCnt; idx++) {
 126                         data[idx] = PVR2_COMPOSE_LE(hdw->cmd_buffer,idx*4);
 127                 }
 128                 data += chunkCnt;
 129                 dlen -= chunkCnt;
 130                 offs += chunkCnt;
 131         }
 132
 133         return 0;
 134 }
 135
 136
 137 /* This prototype is set up to be compatible with the
 138    cx2341x_mbox_func prototype in cx2341x.h, which should be in
 139    kernels 2.6.18 or later.  We do this so that we can enable
 140    cx2341x.ko to write to our encoder (by handing it a pointer to this
 141    function).  For earlier kernels this doesn't really matter. */
 142 static int pvr2_encoder_cmd(void *ctxt,
 143                             u32 cmd,
 144                             int arg_cnt_send,
 145                             int arg_cnt_recv,
 146                             u32 *argp)
 147 {
 148         unsigned int poll_count;
 149         unsigned int try_count = 0;
 150         int retry_flag;
 151         int ret = 0;
 152         unsigned int idx;
 153         /* These sizes look to be limited by the FX2 firmware implementation */
 154         u32 wrData[16];
 155         u32 rdData[16];
 156         struct pvr2_hdw *hdw = (struct pvr2_hdw *)ctxt;
 157
 158
 159         /*
 160
 161         The encoder seems to speak entirely using blocks 32 bit words.
 162         In ivtv driver terms, this is a mailbox at MBOX_BASE which we
 163         populate with data and watch what the hardware does with it.
 164         The first word is a set of flags used to control the
 165         transaction, the second word is the command to execute, the
 166         third byte is zero (ivtv driver suggests that this is some
 167         kind of return value), and the fourth byte is a specified
 168         timeout (windows driver always uses 0x00060000 except for one
 169         case when it is zero).  All successive words are the argument
 170         words for the command.
 171
 172         First, write out the entire set of words, with the first word
 173         being zero.
 174
 175         Next, write out just the first word again, but set it to
 176         IVTV_MBOX_DRIVER_DONE | IVTV_DRIVER_BUSY this time (which
 177         probably means "go").
 178
 179         Next, read back the return count words.  Check the first word,
 180         which should have IVTV_MBOX_FIRMWARE_DONE set.  If however
 181         that bit is not set, then the command isn't done so repeat the
 182         read until it is set.
 183
 184         Finally, write out just the first word again, but set it to
 185         0x0 this time (which probably means "idle").
 186
 187         */
 188
 189         if (arg_cnt_send > (ARRAY_SIZE(wrData) - 4)) {
 190                 pvr2_trace(
 191                         PVR2_TRACE_ERROR_LEGS,
 192                         "Failed to write cx23416 command"
 193                         " - too many input arguments"
 194                         " (was given %u limit %lu)",
 195                         arg_cnt_send, (long unsigned) ARRAY_SIZE(wrData) - 4);
 196                 return -EINVAL;
 197         }
 198
 199         if (arg_cnt_recv > (ARRAY_SIZE(rdData) - 4)) {
 200                 pvr2_trace(
 201                         PVR2_TRACE_ERROR_LEGS,
 202                         "Failed to write cx23416 command"
 203                         " - too many return arguments"
 204                         " (was given %u limit %lu)",
 205                         arg_cnt_recv, (long unsigned) ARRAY_SIZE(rdData) - 4);
 206                 return -EINVAL;
 207         }
 208
 209
 210         LOCK_TAKE(hdw->ctl_lock); do {
 211
 212                 if (!hdw->state_encoder_ok) {
 213                         ret = -EIO;
 214                         break;
 215                 }
 216
 217                 retry_flag = 0;
 218                 try_count++;
 219                 ret = 0;
 220                 wrData[0] = 0;
 221                 wrData[1] = cmd;
 222                 wrData[2] = 0;
 223                 wrData[3] = 0x00060000;
 224                 for (idx = 0; idx < arg_cnt_send; idx++) {
 225                         wrData[idx+4] = argp[idx];
 226                 }
 227                 for (; idx < ARRAY_SIZE(wrData) - 4; idx++) {
 228                         wrData[idx+4] = 0;
 229                 }
 230
 231                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,idx);
 232                 if (ret) break;
 233                 wrData[0] = IVTV_MBOX_DRIVER_DONE|IVTV_MBOX_DRIVER_BUSY;
 234                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
 235                 if (ret) break;
 236                 poll_count = 0;
 237                 while (1) {
 238                         poll_count++;
 239                         ret = pvr2_encoder_read_words(hdw,MBOX_BASE,rdData,
 240                                                       arg_cnt_recv+4);
 241                         if (ret) {
 242                                 break;
 243                         }
 244                         if (rdData[0] & IVTV_MBOX_FIRMWARE_DONE) {
 245                                 break;
 246                         }
 247                         if (rdData[0] && (poll_count < 1000)) continue;
 248                         if (!rdData[0]) {
 249                                 retry_flag = !0;
 250                                 pvr2_trace(
 251                                         PVR2_TRACE_ERROR_LEGS,
 252                                         "Encoder timed out waiting for us"
 253                                         "; arranging to retry");
 254                         } else {
 255                                 pvr2_trace(
 256                                         PVR2_TRACE_ERROR_LEGS,
 257                                         "***WARNING*** device's encoder"
 258                                         " appears to be stuck"
 259                                         " (status=0x%08x)",rdData[0]);
 260                         }
 261                         pvr2_trace(
 262                                 PVR2_TRACE_ERROR_LEGS,
 263                                 "Encoder command: 0x%02x",cmd);
 264                         for (idx = 4; idx < arg_cnt_send; idx++) {
 265                                 pvr2_trace(
 266                                         PVR2_TRACE_ERROR_LEGS,
 267                                         "Encoder arg%d: 0x%08x",
 268                                         idx-3,wrData[idx]);
 269                         }
 270                         ret = -EBUSY;
 271                         break;
 272                 }
 273                 if (retry_flag) {
 274                         if (try_count < 20) continue;
 275                         pvr2_trace(
 276                                 PVR2_TRACE_ERROR_LEGS,
 277                                 "Too many retries...");
 278                         ret = -EBUSY;
 279                 }
 280                 if (ret) {
 281                         del_timer_sync(&hdw->encoder_run_timer);
 282                         hdw->state_encoder_ok = 0;
 283                         pvr2_trace(PVR2_TRACE_STBITS,
 284                                    "State bit %s <-- %s",
 285                                    "state_encoder_ok",
 286                                    (hdw->state_encoder_ok ? "true" : "false"));
 287                         if (hdw->state_encoder_runok) {
 288                                 hdw->state_encoder_runok = 0;
 289                                 pvr2_trace(PVR2_TRACE_STBITS,
 290                                    "State bit %s <-- %s",
 291                                            "state_encoder_runok",
 292                                            (hdw->state_encoder_runok ?
 293                                             "true" : "false"));
 294                         }
 295                         pvr2_trace(
 296                                 PVR2_TRACE_ERROR_LEGS,
 297                                 "Giving up on command."
 298                                 "  This is normally recovered by the driver.");
 299                         break;
 300                 }
 301                 wrData[0] = 0x7;
 302                 for (idx = 0; idx < arg_cnt_recv; idx++) {
 303                         argp[idx] = rdData[idx+4];
 304                 }
 305
 306                 wrData[0] = 0x0;
 307                 ret = pvr2_encoder_write_words(hdw,MBOX_BASE,wrData,1);
 308                 if (ret) break;
 309
 310         } while(0); LOCK_GIVE(hdw->ctl_lock);
 311
 312         return ret;
 313 }
 314
 315
 316 static int pvr2_encoder_vcmd(struct pvr2_hdw *hdw, int cmd,
 317                              int args, ...)
 318 {
 319         va_list vl;
 320         unsigned int idx;
 321         u32 data[12];
 322
 323         if (args > ARRAY_SIZE(data)) {
 324                 pvr2_trace(
 325                         PVR2_TRACE_ERROR_LEGS,
 326                         "Failed to write cx23416 command"
 327                         " - too many arguments"
 328                         " (was given %u limit %lu)",
 329                         args, (long unsigned) ARRAY_SIZE(data));
 330                 return -EINVAL;
 331         }
 332
 333         va_start(vl, args);
 334         for (idx = 0; idx < args; idx++) {
 335                 data[idx] = va_arg(vl, u32);
 336         }
 337         va_end(vl);
 338
 339         return pvr2_encoder_cmd(hdw,cmd,args,0,data);
 340 }
 341
 342
 343 /* This implements some extra setup for the encoder that seems to be
 344    specific to the PVR USB2 hardware. */
 345 static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw)
 346 {
 347         int ret = 0;
 348         int encMisc3Arg = 0;
 349
 350 #if 0
 351         /* This inexplicable bit happens in the Hauppage windows
 352            driver (for both 24xxx and 29xxx devices).  However I
 353            currently see no difference in behavior with or without
 354            this stuff.  Leave this here as a note of its existence,
 355            but don't use it. */
 356         LOCK_TAKE(hdw->ctl_lock); do {
 357                 u32 dat[1];
 358                 dat[0] = 0x80000640;
 359                 pvr2_encoder_write_words(hdw,0x01fe,dat,1);
 360                 pvr2_encoder_write_words(hdw,0x023e,dat,1);
 361         } while(0); LOCK_GIVE(hdw->ctl_lock);
 362 #endif
 363
 364         /* Mike Isely <isely@pobox.com> 26-Jan-2006 The windows driver
 365            sends the following list of ENC_MISC commands (for both
 366            24xxx and 29xxx devices).  Meanings are not entirely clear,
 367            however without the ENC_MISC(3,1) command then we risk
 368            random perpetual video corruption whenever the video input
 369            breaks up for a moment (like when switching channels). */
 370
 371
 372 #if 0
 373         /* This ENC_MISC(5,0) command seems to hurt 29xxx sync
 374            performance on channel changes, but is not a problem on
 375            24xxx devices. */
 376         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 5,0,0,0);
 377 #endif
 378
 379         /* This ENC_MISC(3,encMisc3Arg) command is critical - without
 380            it there will eventually be video corruption.  Also, the
 381            saa7115 case is strange - the Windows driver is passing 1
 382            regardless of device type but if we have 1 for saa7115
 383            devices the video turns sluggish.  */
 384         if (hdw->hdw_desc->flag_has_cx25840) {
 385                 encMisc3Arg = 1;
 386         } else {
 387                 encMisc3Arg = 0;
 388         }
 389         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 3,
 390                                  encMisc3Arg,0,0);
 391
 392         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 8,0,0,0);
 393
 394 #if 0
 395         /* This ENC_MISC(4,1) command is poisonous, so it is commented
 396            out.  But I'm leaving it here anyway to document its
 397            existence in the Windows driver.  The effect of this
 398            command is that apps displaying the stream become sluggish
 399            with stuttering video. */
 400         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 4,1,0,0);
 401 #endif
 402
 403         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 0,3,0,0);
 404         ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4,15,0,0,0);
 405
 406         return ret;
 407 }
 408
 409 int pvr2_encoder_adjust(struct pvr2_hdw *hdw)
 410 {
 411         int ret;
 412         ret = cx2341x_update(hdw,pvr2_encoder_cmd,
 413                              (hdw->enc_cur_valid ? &hdw->enc_cur_state : NULL),
 414                              &hdw->enc_ctl_state);
 415         if (ret) {
 416                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 417                            "Error from cx2341x module code=%d",ret);
 418         } else {
 419                 memcpy(&hdw->enc_cur_state,&hdw->enc_ctl_state,
 420                        sizeof(struct cx2341x_mpeg_params));
 421                 hdw->enc_cur_valid = !0;
 422         }
 423         return ret;
 424 }
 425
 426
 427 int pvr2_encoder_configure(struct pvr2_hdw *hdw)
 428 {
 429         int ret;
 430         int val;
 431         pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure"
 432                    " (cx2341x module)");
 433         hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING;
 434         hdw->enc_ctl_state.width = hdw->res_hor_val;
 435         hdw->enc_ctl_state.height = hdw->res_ver_val;
 436         hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & V4L2_STD_525_60) ?
 437                                       0 : 1);
 438
 439         ret = 0;
 440
 441         ret |= pvr2_encoder_prep_config(hdw);
 442
 443         /* saa7115: 0xf0 */
 444         val = 0xf0;
 445         if (hdw->hdw_desc->flag_has_cx25840) {
 446                 /* ivtv cx25840: 0x140 */
 447                 val = 0x140;
 448         }
 449
 450         if (!ret) ret = pvr2_encoder_vcmd(
 451                 hdw,CX2341X_ENC_SET_NUM_VSYNC_LINES, 2,
 452                 val, val);
 453
 454         /* setup firmware to notify us about some events (don't know why...) */
 455         if (!ret) ret = pvr2_encoder_vcmd(
 456                 hdw,CX2341X_ENC_SET_EVENT_NOTIFICATION, 4,
 457                 0, 0, 0x10000000, 0xffffffff);
 458
 459         if (!ret) ret = pvr2_encoder_vcmd(
 460                 hdw,CX2341X_ENC_SET_VBI_LINE, 5,
 461                 0xffffffff,0,0,0,0);
 462
 463         if (ret) {
 464                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 465                            "Failed to configure cx23416");
 466                 return ret;
 467         }
 468
 469         ret = pvr2_encoder_adjust(hdw);
 470         if (ret) return ret;
 471
 472         ret = pvr2_encoder_vcmd(
 473                 hdw, CX2341X_ENC_INITIALIZE_INPUT, 0);
 474
 475         if (ret) {
 476                 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 477                            "Failed to initialize cx23416 video input");
 478                 return ret;
 479         }
 480
 481         return 0;
 482 }
 483
 484
 485 int pvr2_encoder_start(struct pvr2_hdw *hdw)
 486 {
 487         int status;
 488
 489         /* unmask some interrupts */
 490         pvr2_write_register(hdw, 0x0048, 0xbfffffff);
 491
 492         pvr2_encoder_vcmd(hdw,CX2341X_ENC_MUTE_VIDEO,1,
 493                           hdw->input_val == PVR2_CVAL_INPUT_RADIO ? 1 : 0);
 494
 495         switch (hdw->active_stream_type) {
 496         case pvr2_config_vbi:
 497                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 498                                            0x01,0x14);
 499                 break;
 500         case pvr2_config_mpeg:
 501                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 502                                            0,0x13);
 503                 break;
 504         default: /* Unhandled cases for now */
 505                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2,
 506                                            0,0x13);
 507                 break;
 508         }
 509         return status;
 510 }
 511
 512 int pvr2_encoder_stop(struct pvr2_hdw *hdw)
 513 {
 514         int status;
 515
 516         /* mask all interrupts */
 517         pvr2_write_register(hdw, 0x0048, 0xffffffff);
 518
 519         switch (hdw->active_stream_type) {
 520         case pvr2_config_vbi:
 521                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 522                                            0x01,0x01,0x14);
 523                 break;
 524         case pvr2_config_mpeg:
 525                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 526                                            0x01,0,0x13);
 527                 break;
 528         default: /* Unhandled cases for now */
 529                 status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3,
 530                                            0x01,0,0x13);
 531                 break;
 532         }
 533
 534         return status;
 535 }
 536
 537
 538 /*
 539   Stuff for Emacs to see, in order to encourage consistent editing style:
 540   *** Local Variables: ***
 541   *** mode: c ***
 542   *** fill-column: 70 ***
 543   *** tab-width: 8 ***
 544   *** c-basic-offset: 8 ***
 545   *** End: ***
 546   */