git.oblomov.eu Git - linux-2.6/blob - drivers/net/ixp2000/ixp2400_rx.uc

   1 /*
   2  * RX ucode for the Intel IXP2400 in POS-PHY mode.
   3  * Copyright (C) 2004, 2005 Lennert Buytenhek
   4  * Dedicated to Marija Kulikova.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * Assumptions made in this code:
  12  * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where
  13  *   only one full element list is used.  This includes, for example,
  14  *   1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4.  (This
  15  *   is not an exhaustive list.)
  16  * - The RBUF uses 64-byte mpackets.
  17  * - RX descriptors reside in SRAM, and have the following format:
  18  *      struct rx_desc
  19  *      {
  20  *      // to uengine
  21  *              u32     buf_phys_addr;
  22  *              u32     buf_length;
  23  *
  24  *      // from uengine
  25  *              u32     channel;
  26  *              u32     pkt_length;
  27  *      };
  28  * - Packet data resides in DRAM.
  29  * - Packet buffer addresses are 8-byte aligned.
  30  * - Scratch ring 0 is rx_pending.
  31  * - Scratch ring 1 is rx_done, and has status condition 'full'.
  32  * - The host triggers rx_done flush and rx_pending refill on seeing INTA.
  33  * - This code is run on all eight threads of the microengine it runs on.
  34  *
  35  * Local memory is used for per-channel RX state.
  36  */
  37
  38 #define RX_THREAD_FREELIST_0            0x0030
  39 #define RBUF_ELEMENT_DONE               0x0044
  40
  41 #define CHANNEL_FLAGS                   *l$index0[0]
  42 #define CHANNEL_FLAG_RECEIVING          1
  43 #define PACKET_LENGTH                   *l$index0[1]
  44 #define PACKET_CHECKSUM                 *l$index0[2]
  45 #define BUFFER_HANDLE                   *l$index0[3]
  46 #define BUFFER_START                    *l$index0[4]
  47 #define BUFFER_LENGTH                   *l$index0[5]
  48
  49 #define CHANNEL_STATE_SIZE              24      // in bytes
  50 #define CHANNEL_STATE_SHIFT             5       // ceil(log2(state size))
  51
  52
  53         .sig volatile sig1
  54         .sig volatile sig2
  55         .sig volatile sig3
  56
  57         .sig mpacket_arrived
  58         .reg add_to_rx_freelist
  59         .reg read $rsw0, $rsw1
  60         .xfer_order $rsw0 $rsw1
  61
  62         .reg zero
  63
  64         /*
  65          * Initialise add_to_rx_freelist.
  66          */
  67         .begin
  68                 .reg temp
  69                 .reg temp2
  70
  71                 immed[add_to_rx_freelist, RX_THREAD_FREELIST_0]
  72                 immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))]
  73
  74                 local_csr_rd[ACTIVE_CTX_STS]
  75                 immed[temp, 0]
  76                 alu[temp2, temp, and, 0x1f]
  77                 alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20]
  78                 alu[temp2, temp, and, 0x80]
  79                 alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18]
  80         .end
  81
  82         immed[zero, 0]
  83
  84         /*
  85          * Skip context 0 initialisation?
  86          */
  87         .begin
  88                 br!=ctx[0, mpacket_receive_loop#]
  89         .end
  90
  91         /*
  92          * Initialise local memory.
  93          */
  94         .begin
  95                 .reg addr
  96                 .reg temp
  97
  98                 immed[temp, 0]
  99         init_local_mem_loop#:
 100                 alu_shf[addr, --, b, temp, <<CHANNEL_STATE_SHIFT]
 101                 local_csr_wr[ACTIVE_LM_ADDR_0, addr]
 102                 nop
 103                 nop
 104                 nop
 105
 106                 immed[CHANNEL_FLAGS, 0]
 107
 108                 alu[temp, temp, +, 1]
 109                 alu[--, temp, and, 0x20]
 110                 beq[init_local_mem_loop#]
 111         .end
 112
 113         /*
 114          * Initialise signal pipeline.
 115          */
 116         .begin
 117                 local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)]
 118                 .set_sig sig1
 119
 120                 local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)]
 121                 .set_sig sig2
 122
 123                 local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)]
 124                 .set_sig sig3
 125         .end
 126
 127 mpacket_receive_loop#:
 128         /*
 129          * Synchronise and wait for mpacket.
 130          */
 131         .begin
 132                 ctx_arb[sig1]
 133                 local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))]
 134
 135                 msf[fast_wr, --, add_to_rx_freelist, 0]
 136                 .set_sig mpacket_arrived
 137                 ctx_arb[mpacket_arrived]
 138                 .set $rsw0 $rsw1
 139         .end
 140
 141         /*
 142          * We halt if we see {inbparerr,parerr,null,soperror}.
 143          */
 144         .begin
 145                 alu_shf[--, 0x1b, and, $rsw0, >>8]
 146                 bne[abort_rswerr#]
 147         .end
 148
 149         /*
 150          * Point local memory pointer to this channel's state area.
 151          */
 152         .begin
 153                 .reg chanaddr
 154
 155                 alu[chanaddr, $rsw0, and, 0x1f]
 156                 alu_shf[chanaddr, --, b, chanaddr, <<CHANNEL_STATE_SHIFT]
 157                 local_csr_wr[ACTIVE_LM_ADDR_0, chanaddr]
 158                 nop
 159                 nop
 160                 nop
 161         .end
 162
 163         /*
 164          * Check whether we received a SOP mpacket while we were already
 165          * working on a packet, or a non-SOP mpacket while there was no
 166          * packet pending.  (SOP == RECEIVING -> abort)  If everything's
 167          * okay, update the RECEIVING flag to reflect our new state.
 168          */
 169         .begin
 170                 .reg temp
 171                 .reg eop
 172
 173                 #if CHANNEL_FLAG_RECEIVING != 1
 174                 #error CHANNEL_FLAG_RECEIVING is not 1
 175                 #endif
 176
 177                 alu_shf[temp, 1, and, $rsw0, >>15]
 178                 alu[temp, temp, xor, CHANNEL_FLAGS]
 179                 alu[--, temp, and, CHANNEL_FLAG_RECEIVING]
 180                 beq[abort_proterr#]
 181
 182                 alu_shf[eop, 1, and, $rsw0, >>14]
 183                 alu[CHANNEL_FLAGS, temp, xor, eop]
 184         .end
 185
 186         /*
 187          * Copy the mpacket into the right spot, and in case of EOP,
 188          * write back the descriptor and pass the packet on.
 189          */
 190         .begin
 191                 .reg buffer_offset
 192                 .reg _packet_length
 193                 .reg _packet_checksum
 194                 .reg _buffer_handle
 195                 .reg _buffer_start
 196                 .reg _buffer_length
 197
 198                 /*
 199                  * Determine buffer_offset, _packet_length and
 200                  * _packet_checksum.
 201                  */
 202                 .begin
 203                         .reg temp
 204
 205                         alu[--, 1, and, $rsw0, >>15]
 206                         beq[not_sop#]
 207
 208                         immed[PACKET_LENGTH, 0]
 209                         immed[PACKET_CHECKSUM, 0]
 210
 211                 not_sop#:
 212                         alu[buffer_offset, --, b, PACKET_LENGTH]
 213                         alu_shf[temp, 0xff, and, $rsw0, >>16]
 214                         alu[_packet_length, buffer_offset, +, temp]
 215                         alu[PACKET_LENGTH, --, b, _packet_length]
 216
 217                         immed[temp, 0xffff]
 218                         alu[temp, $rsw1, and, temp]
 219                         alu[_packet_checksum, PACKET_CHECKSUM, +, temp]
 220                         alu[PACKET_CHECKSUM, --, b, _packet_checksum]
 221                 .end
 222
 223                 /*
 224                  * Allocate buffer in case of SOP.
 225                  */
 226                 .begin
 227                         .reg temp
 228
 229                         alu[temp, 1, and, $rsw0, >>15]
 230                         beq[skip_buffer_alloc#]
 231
 232                         .begin
 233                                 .sig zzz
 234                                 .reg read $stemp $stemp2
 235                                 .xfer_order $stemp $stemp2
 236
 237                         rx_nobufs#:
 238                                 scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz]
 239                                 alu[_buffer_handle, --, b, $stemp]
 240                                 beq[rx_nobufs#]
 241
 242                                 sram[read, $stemp, _buffer_handle, 0, 2],
 243                                                                 ctx_swap[zzz]
 244                                 alu[_buffer_start, --, b, $stemp]
 245                                 alu[_buffer_length, --, b, $stemp2]
 246                         .end
 247
 248                 skip_buffer_alloc#:
 249                 .end
 250
 251                 /*
 252                  * Resynchronise.
 253                  */
 254                 .begin
 255                         ctx_arb[sig2]
 256                         local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))]
 257                 .end
 258
 259                 /*
 260                  * Synchronise buffer state.
 261                  */
 262                 .begin
 263                         .reg temp
 264
 265                         alu[temp, 1, and, $rsw0, >>15]
 266                         beq[copy_from_local_mem#]
 267
 268                         alu[BUFFER_HANDLE, --, b, _buffer_handle]
 269                         alu[BUFFER_START, --, b, _buffer_start]
 270                         alu[BUFFER_LENGTH, --, b, _buffer_length]
 271                         br[sync_state_done#]
 272
 273                 copy_from_local_mem#:
 274                         alu[_buffer_handle, --, b, BUFFER_HANDLE]
 275                         alu[_buffer_start, --, b, BUFFER_START]
 276                         alu[_buffer_length, --, b, BUFFER_LENGTH]
 277
 278                 sync_state_done#:
 279                 .end
 280
 281 #if 0
 282                 /*
 283                  * Debug buffer state management.
 284                  */
 285                 .begin
 286                         .reg temp
 287
 288                         alu[temp, 1, and, $rsw0, >>14]
 289                         beq[no_poison#]
 290                         immed[BUFFER_HANDLE, 0xdead]
 291                         immed[BUFFER_START, 0xdead]
 292                         immed[BUFFER_LENGTH, 0xdead]
 293                 no_poison#:
 294
 295                         immed[temp, 0xdead]
 296                         alu[--, _buffer_handle, -, temp]
 297                         beq[state_corrupted#]
 298                         alu[--, _buffer_start, -, temp]
 299                         beq[state_corrupted#]
 300                         alu[--, _buffer_length, -, temp]
 301                         beq[state_corrupted#]
 302                 .end
 303 #endif
 304
 305                 /*
 306                  * Check buffer length.
 307                  */
 308                 .begin
 309                         alu[--, _buffer_length, -, _packet_length]
 310                         blo[buffer_overflow#]
 311                 .end
 312
 313                 /*
 314                  * Copy the mpacket and give back the RBUF element.
 315                  */
 316                 .begin
 317                         .reg element
 318                         .reg xfer_size
 319                         .reg temp
 320                         .sig copy_sig
 321
 322                         alu_shf[element, 0x7f, and, $rsw0, >>24]
 323                         alu_shf[xfer_size, 0xff, and, $rsw0, >>16]
 324
 325                         alu[xfer_size, xfer_size, -, 1]
 326                         alu_shf[xfer_size, 0x10, or, xfer_size, >>3]
 327                         alu_shf[temp, 0x10, or, xfer_size, <<21]
 328                         alu_shf[temp, temp, or, element, <<11]
 329                         alu_shf[--, temp, or, 1, <<18]
 330
 331                         dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8],
 332                                                 indirect_ref, sig_done[copy_sig]
 333                         ctx_arb[copy_sig]
 334
 335                         alu[temp, RBUF_ELEMENT_DONE, or, element, <<16]
 336                         msf[fast_wr, --, temp, 0]
 337                 .end
 338
 339                 /*
 340                  * If EOP, write back the packet descriptor.
 341                  */
 342                 .begin
 343                         .reg write $stemp $stemp2
 344                         .xfer_order $stemp $stemp2
 345                         .sig zzz
 346
 347                         alu_shf[--, 1, and, $rsw0, >>14]
 348                         beq[no_writeback#]
 349
 350                         alu[$stemp, $rsw0, and, 0x1f]
 351                         alu[$stemp2, --, b, _packet_length]
 352                         sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz]
 353
 354                 no_writeback#:
 355                 .end
 356
 357                 /*
 358                  * Resynchronise.
 359                  */
 360                 .begin
 361                         ctx_arb[sig3]
 362                         local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))]
 363                 .end
 364
 365                 /*
 366                  * If EOP, put the buffer back onto the scratch ring.
 367                  */
 368                 .begin
 369                         .reg write $stemp
 370                         .sig zzz
 371
 372                         br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#]
 373
 374                         alu_shf[--, 1, and, $rsw0, >>14]
 375                         beq[mpacket_receive_loop#]
 376
 377                         alu[--, 1, and, $rsw0, >>10]
 378                         bne[rxerr#]
 379
 380                         alu[$stemp, --, b, _buffer_handle]
 381                         scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz]
 382                         cap[fast_wr, 0, XSCALE_INT_A]
 383                         br[mpacket_receive_loop#]
 384
 385                 rxerr#:
 386                         alu[$stemp, --, b, _buffer_handle]
 387                         scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz]
 388                         br[mpacket_receive_loop#]
 389                 .end
 390         .end
 391
 392
 393 abort_rswerr#:
 394         halt
 395
 396 abort_proterr#:
 397         halt
 398
 399 state_corrupted#:
 400         halt
 401
 402 buffer_overflow#:
 403         halt
 404
 405 rx_done_ring_overflow#:
 406         halt
 407
 408