git.oblomov.eu Git - linux-2.6/blob - include/asm-sparc64/uaccess.h

   1 #ifndef _ASM_UACCESS_H
   2 #define _ASM_UACCESS_H
   3
   4 /*
   5  * User space memory access functions
   6  */
   7
   8 #ifdef __KERNEL__
   9 #include <linux/compiler.h>
  10 #include <linux/sched.h>
  11 #include <linux/string.h>
  12 #include <asm/asi.h>
  13 #include <asm/system.h>
  14 #include <asm/spitfire.h>
  15 #include <asm-generic/uaccess.h>
  16 #endif
  17
  18 #ifndef __ASSEMBLY__
  19
  20 /*
  21  * Sparc64 is segmented, though more like the M68K than the I386.
  22  * We use the secondary ASI to address user memory, which references a
  23  * completely different VM map, thus there is zero chance of the user
  24  * doing something queer and tricking us into poking kernel memory.
  25  *
  26  * What is left here is basically what is needed for the other parts of
  27  * the kernel that expect to be able to manipulate, erum, "segments".
  28  * Or perhaps more properly, permissions.
  29  *
  30  * "For historical reasons, these macros are grossly misnamed." -Linus
  31  */
  32
  33 #define KERNEL_DS   ((mm_segment_t) { ASI_P })
  34 #define USER_DS     ((mm_segment_t) { ASI_AIUS })       /* har har har */
  35
  36 #define VERIFY_READ     0
  37 #define VERIFY_WRITE    1
  38
  39 #define get_fs() ((mm_segment_t) { get_thread_current_ds() })
  40 #define get_ds() (KERNEL_DS)
  41
  42 #define segment_eq(a,b)  ((a).seg == (b).seg)
  43
  44 #define set_fs(val)                                                             \
  45 do {                                                                            \
  46         set_thread_current_ds((val).seg);                                       \
  47         __asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));        \
  48 } while(0)
  49
  50 static inline int __access_ok(const void __user * addr, unsigned long size)
  51 {
  52         return 1;
  53 }
  54
  55 static inline int access_ok(int type, const void __user * addr, unsigned long size)
  56 {
  57         return 1;
  58 }
  59
  60 /*
  61  * The exception table consists of pairs of addresses: the first is the
  62  * address of an instruction that is allowed to fault, and the second is
  63  * the address at which the program should continue.  No registers are
  64  * modified, so it is entirely up to the continuation code to figure out
  65  * what to do.
  66  *
  67  * All the routines below use bits of fixup code that are out of line
  68  * with the main instruction path.  This means when everything is well,
  69  * we don't even have to jump over them.  Further, they do not intrude
  70  * on our cache or tlb entries.
  71  */
  72
  73 struct exception_table_entry {
  74         unsigned int insn, fixup;
  75 };
  76
  77 extern void __ret_efault(void);
  78 extern void __retl_efault(void);
  79
  80 /* Uh, these should become the main single-value transfer routines..
  81  * They automatically use the right size if we just have the right
  82  * pointer type..
  83  *
  84  * This gets kind of ugly. We want to return _two_ values in "get_user()"
  85  * and yet we don't want to do any pointers, because that is too much
  86  * of a performance impact. Thus we have a few rather ugly macros here,
  87  * and hide all the ugliness from the user.
  88  */
  89 #define put_user(x,ptr) ({ \
  90 unsigned long __pu_addr = (unsigned long)(ptr); \
  91 __chk_user_ptr(ptr); \
  92 __put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
  93
  94 #define get_user(x,ptr) ({ \
  95 unsigned long __gu_addr = (unsigned long)(ptr); \
  96 __chk_user_ptr(ptr); \
  97 __get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
  98
  99 #define __put_user(x,ptr) put_user(x,ptr)
 100 #define __get_user(x,ptr) get_user(x,ptr)
 101
 102 struct __large_struct { unsigned long buf[100]; };
 103 #define __m(x) ((struct __large_struct *)(x))
 104
 105 #define __put_user_nocheck(data,addr,size) ({ \
 106 register int __pu_ret; \
 107 switch (size) { \
 108 case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
 109 case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
 110 case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
 111 case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
 112 default: __pu_ret = __put_user_bad(); break; \
 113 } __pu_ret; })
 114
 115 #define __put_user_asm(x,size,addr,ret)                                 \
 116 __asm__ __volatile__(                                                   \
 117         "/* Put user asm, inline. */\n"                                 \
 118 "1:\t"  "st"#size "a %1, [%2] %%asi\n\t"                                \
 119         "clr    %0\n"                                                   \
 120 "2:\n\n\t"                                                              \
 121         ".section .fixup,#alloc,#execinstr\n\t"                         \
 122         ".align 4\n"                                                    \
 123 "3:\n\t"                                                                \
 124         "sethi  %%hi(2b), %0\n\t"                                       \
 125         "jmpl   %0 + %%lo(2b), %%g0\n\t"                                \
 126         " mov   %3, %0\n\n\t"                                           \
 127         ".previous\n\t"                                                 \
 128         ".section __ex_table,\"a\"\n\t"                                 \
 129         ".align 4\n\t"                                                  \
 130         ".word  1b, 3b\n\t"                                             \
 131         ".previous\n\n\t"                                               \
 132        : "=r" (ret) : "r" (x), "r" (__m(addr)),                         \
 133          "i" (-EFAULT))
 134
 135 extern int __put_user_bad(void);
 136
 137 #define __get_user_nocheck(data,addr,size,type) ({ \
 138 register int __gu_ret; \
 139 register unsigned long __gu_val; \
 140 switch (size) { \
 141 case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
 142 case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
 143 case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
 144 case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
 145 default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
 146 } data = (type) __gu_val; __gu_ret; })
 147
 148 #define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
 149 register unsigned long __gu_val __asm__ ("l1"); \
 150 switch (size) { \
 151 case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
 152 case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
 153 case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
 154 case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
 155 default: if (__get_user_bad()) return retval; \
 156 } data = (type) __gu_val; })
 157
 158 #define __get_user_asm(x,size,addr,ret)                                 \
 159 __asm__ __volatile__(                                                   \
 160         "/* Get user asm, inline. */\n"                                 \
 161 "1:\t"  "ld"#size "a [%2] %%asi, %1\n\t"                                \
 162         "clr    %0\n"                                                   \
 163 "2:\n\n\t"                                                              \
 164         ".section .fixup,#alloc,#execinstr\n\t"                         \
 165         ".align 4\n"                                                    \
 166 "3:\n\t"                                                                \
 167         "sethi  %%hi(2b), %0\n\t"                                       \
 168         "clr    %1\n\t"                                                 \
 169         "jmpl   %0 + %%lo(2b), %%g0\n\t"                                \
 170         " mov   %3, %0\n\n\t"                                           \
 171         ".previous\n\t"                                                 \
 172         ".section __ex_table,\"a\"\n\t"                                 \
 173         ".align 4\n\t"                                                  \
 174         ".word  1b, 3b\n\n\t"                                           \
 175         ".previous\n\t"                                                 \
 176        : "=r" (ret), "=r" (x) : "r" (__m(addr)),                        \
 177          "i" (-EFAULT))
 178
 179 #define __get_user_asm_ret(x,size,addr,retval)                          \
 180 if (__builtin_constant_p(retval) && retval == -EFAULT)                  \
 181 __asm__ __volatile__(                                                   \
 182         "/* Get user asm ret, inline. */\n"                             \
 183 "1:\t"  "ld"#size "a [%1] %%asi, %0\n\n\t"                              \
 184         ".section __ex_table,\"a\"\n\t"                                 \
 185         ".align 4\n\t"                                                  \
 186         ".word  1b,__ret_efault\n\n\t"                                  \
 187         ".previous\n\t"                                                 \
 188        : "=r" (x) : "r" (__m(addr)));                                   \
 189 else                                                                    \
 190 __asm__ __volatile__(                                                   \
 191         "/* Get user asm ret, inline. */\n"                             \
 192 "1:\t"  "ld"#size "a [%1] %%asi, %0\n\n\t"                              \
 193         ".section .fixup,#alloc,#execinstr\n\t"                         \
 194         ".align 4\n"                                                    \
 195 "3:\n\t"                                                                \
 196         "ret\n\t"                                                       \
 197         " restore %%g0, %2, %%o0\n\n\t"                                 \
 198         ".previous\n\t"                                                 \
 199         ".section __ex_table,\"a\"\n\t"                                 \
 200         ".align 4\n\t"                                                  \
 201         ".word  1b, 3b\n\n\t"                                           \
 202         ".previous\n\t"                                                 \
 203        : "=r" (x) : "r" (__m(addr)), "i" (retval))
 204
 205 extern int __get_user_bad(void);
 206
 207 extern unsigned long __must_check ___copy_from_user(void *to,
 208                                                     const void __user *from,
 209                                                     unsigned long size);
 210 extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
 211                                           unsigned long size);
 212 static inline unsigned long __must_check
 213 copy_from_user(void *to, const void __user *from, unsigned long size)
 214 {
 215         unsigned long ret = ___copy_from_user(to, from, size);
 216
 217         if (unlikely(ret))
 218                 ret = copy_from_user_fixup(to, from, size);
 219         return ret;
 220 }
 221 #define __copy_from_user copy_from_user
 222
 223 extern unsigned long __must_check ___copy_to_user(void __user *to,
 224                                                   const void *from,
 225                                                   unsigned long size);
 226 extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
 227                                         unsigned long size);
 228 static inline unsigned long __must_check
 229 copy_to_user(void __user *to, const void *from, unsigned long size)
 230 {
 231         unsigned long ret = ___copy_to_user(to, from, size);
 232
 233         if (unlikely(ret))
 234                 ret = copy_to_user_fixup(to, from, size);
 235         return ret;
 236 }
 237 #define __copy_to_user copy_to_user
 238
 239 extern unsigned long __must_check ___copy_in_user(void __user *to,
 240                                                   const void __user *from,
 241                                                   unsigned long size);
 242 extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
 243                                         unsigned long size);
 244 static inline unsigned long __must_check
 245 copy_in_user(void __user *to, void __user *from, unsigned long size)
 246 {
 247         unsigned long ret = ___copy_in_user(to, from, size);
 248
 249         if (unlikely(ret))
 250                 ret = copy_in_user_fixup(to, from, size);
 251         return ret;
 252 }
 253 #define __copy_in_user copy_in_user
 254
 255 extern unsigned long __must_check __clear_user(void __user *, unsigned long);
 256
 257 #define clear_user __clear_user
 258
 259 extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
 260
 261 #define strncpy_from_user __strncpy_from_user
 262
 263 extern long __strlen_user(const char __user *);
 264 extern long __strnlen_user(const char __user *, long len);
 265
 266 #define strlen_user __strlen_user
 267 #define strnlen_user __strnlen_user
 268 #define __copy_to_user_inatomic __copy_to_user
 269 #define __copy_from_user_inatomic __copy_from_user
 270
 271 #endif  /* __ASSEMBLY__ */
 272
 273 #endif /* _ASM_UACCESS_H */