IB/mlx4: Fix check of max_qp_dest_rdma in modify QP
[linux-2.6] / drivers / ieee1394 / pcilynx.c
1 /*
2  * pcilynx.c - Texas Instruments PCILynx driver
3  * Copyright (C) 1999,2000 Andreas Bombe <andreas.bombe@munich.netsurf.de>,
4  *                         Stephan Linz <linz@mazet.de>
5  *                         Manfred Weihs <weihs@ict.tuwien.ac.at>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software Foundation,
19  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20  */
21
22 /*
23  * Contributions:
24  *
25  * Manfred Weihs <weihs@ict.tuwien.ac.at>
26  *        reading bus info block (containing GUID) from serial
27  *            eeprom via i2c and storing it in config ROM
28  *        Reworked code for initiating bus resets
29  *            (long, short, with or without hold-off)
30  *        Enhancements in async and iso send code
31  */
32
33 #include <linux/kernel.h>
34 #include <linux/slab.h>
35 #include <linux/interrupt.h>
36 #include <linux/wait.h>
37 #include <linux/errno.h>
38 #include <linux/module.h>
39 #include <linux/moduleparam.h>
40 #include <linux/init.h>
41 #include <linux/pci.h>
42 #include <linux/fs.h>
43 #include <linux/poll.h>
44 #include <linux/kdev_t.h>
45 #include <linux/dma-mapping.h>
46 #include <asm/byteorder.h>
47 #include <asm/atomic.h>
48 #include <asm/io.h>
49 #include <asm/uaccess.h>
50 #include <asm/irq.h>
51
52 #include "csr1212.h"
53 #include "ieee1394.h"
54 #include "ieee1394_types.h"
55 #include "hosts.h"
56 #include "ieee1394_core.h"
57 #include "highlevel.h"
58 #include "pcilynx.h"
59
60 #include <linux/i2c.h>
61 #include <linux/i2c-algo-bit.h>
62
63 /* print general (card independent) information */
64 #define PRINT_G(level, fmt, args...) printk(level "pcilynx: " fmt "\n" , ## args)
65 /* print card specific information */
66 #define PRINT(level, card, fmt, args...) printk(level "pcilynx%d: " fmt "\n" , card , ## args)
67
68 #ifdef CONFIG_IEEE1394_VERBOSEDEBUG
69 #define PRINT_GD(level, fmt, args...) printk(level "pcilynx: " fmt "\n" , ## args)
70 #define PRINTD(level, card, fmt, args...) printk(level "pcilynx%d: " fmt "\n" , card , ## args)
71 #else
72 #define PRINT_GD(level, fmt, args...) do {} while (0)
73 #define PRINTD(level, card, fmt, args...) do {} while (0)
74 #endif
75
76
77 /* Module Parameters */
78 static int skip_eeprom;
79 module_param(skip_eeprom, int, 0444);
80 MODULE_PARM_DESC(skip_eeprom, "Use generic bus info block instead of serial eeprom (default = 0).");
81
82
83 static struct hpsb_host_driver lynx_driver;
84 static unsigned int card_id;
85
86
87
88 /*
89  * I2C stuff
90  */
91
92 /* the i2c stuff was inspired by i2c-philips-par.c */
93
94 static void bit_setscl(void *data, int state)
95 {
96         if (state) {
97                   ((struct ti_lynx *) data)->i2c_driven_state |= 0x00000040;
98         } else {
99                   ((struct ti_lynx *) data)->i2c_driven_state &= ~0x00000040;
100         }
101         reg_write((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL, ((struct ti_lynx *) data)->i2c_driven_state);
102 }
103
104 static void bit_setsda(void *data, int state)
105 {
106         if (state) {
107                   ((struct ti_lynx *) data)->i2c_driven_state |= 0x00000010;
108         } else {
109                   ((struct ti_lynx *) data)->i2c_driven_state &= ~0x00000010;
110         }
111         reg_write((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL, ((struct ti_lynx *) data)->i2c_driven_state);
112 }
113
114 static int bit_getscl(void *data)
115 {
116         return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000040;
117 }
118
119 static int bit_getsda(void *data)
120 {
121         return reg_read((struct ti_lynx *) data, SERIAL_EEPROM_CONTROL) & 0x00000010;
122 }
123
124 static int bit_reg(struct i2c_client *client)
125 {
126         return 0;
127 }
128
129 static int bit_unreg(struct i2c_client *client)
130 {
131         return 0;
132 }
133
134 static struct i2c_algo_bit_data bit_data = {
135         .setsda                 = bit_setsda,
136         .setscl                 = bit_setscl,
137         .getsda                 = bit_getsda,
138         .getscl                 = bit_getscl,
139         .udelay                 = 5,
140         .timeout                = 100,
141 };
142
143 static struct i2c_adapter bit_ops = {
144         .id                     = 0xAA, //FIXME: probably we should get an id in i2c-id.h
145         .client_register        = bit_reg,
146         .client_unregister      = bit_unreg,
147         .name                   = "PCILynx I2C",
148 };
149
150
151
152 /*
153  * PCL handling functions.
154  */
155
156 static pcl_t alloc_pcl(struct ti_lynx *lynx)
157 {
158         u8 m;
159         int i, j;
160
161         spin_lock(&lynx->lock);
162         /* FIXME - use ffz() to make this readable */
163         for (i = 0; i < (LOCALRAM_SIZE / 1024); i++) {
164                 m = lynx->pcl_bmap[i];
165                 for (j = 0; j < 8; j++) {
166                         if (m & 1<<j) {
167                                 continue;
168                         }
169                         m |= 1<<j;
170                         lynx->pcl_bmap[i] = m;
171                         spin_unlock(&lynx->lock);
172                         return 8 * i + j;
173                 }
174         }
175         spin_unlock(&lynx->lock);
176
177         return -1;
178 }
179
180
181 #if 0
182 static void free_pcl(struct ti_lynx *lynx, pcl_t pclid)
183 {
184         int off, bit;
185
186         off = pclid / 8;
187         bit = pclid % 8;
188
189         if (pclid < 0) {
190                 return;
191         }
192
193         spin_lock(&lynx->lock);
194         if (lynx->pcl_bmap[off] & 1<<bit) {
195                 lynx->pcl_bmap[off] &= ~(1<<bit);
196         } else {
197                 PRINT(KERN_ERR, lynx->id,
198                       "attempted to free unallocated PCL %d", pclid);
199         }
200         spin_unlock(&lynx->lock);
201 }
202
203 /* functions useful for debugging */
204 static void pretty_print_pcl(const struct ti_pcl *pcl)
205 {
206         int i;
207
208         printk("PCL next %08x, userdata %08x, status %08x, remtrans %08x, nextbuf %08x\n",
209                pcl->next, pcl->user_data, pcl->pcl_status,
210                pcl->remaining_transfer_count, pcl->next_data_buffer);
211
212         printk("PCL");
213         for (i=0; i<13; i++) {
214                 printk(" c%x:%08x d%x:%08x",
215                        i, pcl->buffer[i].control, i, pcl->buffer[i].pointer);
216                 if (!(i & 0x3) && (i != 12)) printk("\nPCL");
217         }
218         printk("\n");
219 }
220
221 static void print_pcl(const struct ti_lynx *lynx, pcl_t pclid)
222 {
223         struct ti_pcl pcl;
224
225         get_pcl(lynx, pclid, &pcl);
226         pretty_print_pcl(&pcl);
227 }
228 #endif
229
230
231
232 /***********************************
233  * IEEE-1394 functionality section *
234  ***********************************/
235
236
237 static int get_phy_reg(struct ti_lynx *lynx, int addr)
238 {
239         int retval;
240         int i = 0;
241
242         unsigned long flags;
243
244         if (addr > 15) {
245                 PRINT(KERN_ERR, lynx->id,
246                       "%s: PHY register address %d out of range",
247                       __FUNCTION__, addr);
248                 return -1;
249         }
250
251         spin_lock_irqsave(&lynx->phy_reg_lock, flags);
252
253         reg_write(lynx, LINK_PHY, LINK_PHY_READ | LINK_PHY_ADDR(addr));
254         do {
255                 retval = reg_read(lynx, LINK_PHY);
256
257                 if (i > 10000) {
258                         PRINT(KERN_ERR, lynx->id, "%s: runaway loop, aborting",
259                               __FUNCTION__);
260                         retval = -1;
261                         break;
262                 }
263                 i++;
264         } while ((retval & 0xf00) != LINK_PHY_RADDR(addr));
265
266         reg_write(lynx, LINK_INT_STATUS, LINK_INT_PHY_REG_RCVD);
267         spin_unlock_irqrestore(&lynx->phy_reg_lock, flags);
268
269         if (retval != -1) {
270                 return retval & 0xff;
271         } else {
272                 return -1;
273         }
274 }
275
276 static int set_phy_reg(struct ti_lynx *lynx, int addr, int val)
277 {
278         unsigned long flags;
279
280         if (addr > 15) {
281                 PRINT(KERN_ERR, lynx->id,
282                       "%s: PHY register address %d out of range", __FUNCTION__, addr);
283                 return -1;
284         }
285
286         if (val > 0xff) {
287                 PRINT(KERN_ERR, lynx->id,
288                       "%s: PHY register value %d out of range", __FUNCTION__, val);
289                 return -1;
290         }
291
292         spin_lock_irqsave(&lynx->phy_reg_lock, flags);
293
294         reg_write(lynx, LINK_PHY, LINK_PHY_WRITE | LINK_PHY_ADDR(addr)
295                   | LINK_PHY_WDATA(val));
296
297         spin_unlock_irqrestore(&lynx->phy_reg_lock, flags);
298
299         return 0;
300 }
301
302 static int sel_phy_reg_page(struct ti_lynx *lynx, int page)
303 {
304         int reg;
305
306         if (page > 7) {
307                 PRINT(KERN_ERR, lynx->id,
308                       "%s: PHY page %d out of range", __FUNCTION__, page);
309                 return -1;
310         }
311
312         reg = get_phy_reg(lynx, 7);
313         if (reg != -1) {
314                 reg &= 0x1f;
315                 reg |= (page << 5);
316                 set_phy_reg(lynx, 7, reg);
317                 return 0;
318         } else {
319                 return -1;
320         }
321 }
322
323 #if 0 /* not needed at this time */
324 static int sel_phy_reg_port(struct ti_lynx *lynx, int port)
325 {
326         int reg;
327
328         if (port > 15) {
329                 PRINT(KERN_ERR, lynx->id,
330                       "%s: PHY port %d out of range", __FUNCTION__, port);
331                 return -1;
332         }
333
334         reg = get_phy_reg(lynx, 7);
335         if (reg != -1) {
336                 reg &= 0xf0;
337                 reg |= port;
338                 set_phy_reg(lynx, 7, reg);
339                 return 0;
340         } else {
341                 return -1;
342         }
343 }
344 #endif
345
346 static u32 get_phy_vendorid(struct ti_lynx *lynx)
347 {
348         u32 pvid = 0;
349         sel_phy_reg_page(lynx, 1);
350         pvid |= (get_phy_reg(lynx, 10) << 16);
351         pvid |= (get_phy_reg(lynx, 11) << 8);
352         pvid |= get_phy_reg(lynx, 12);
353         PRINT(KERN_INFO, lynx->id, "PHY vendor id 0x%06x", pvid);
354         return pvid;
355 }
356
357 static u32 get_phy_productid(struct ti_lynx *lynx)
358 {
359         u32 id = 0;
360         sel_phy_reg_page(lynx, 1);
361         id |= (get_phy_reg(lynx, 13) << 16);
362         id |= (get_phy_reg(lynx, 14) << 8);
363         id |= get_phy_reg(lynx, 15);
364         PRINT(KERN_INFO, lynx->id, "PHY product id 0x%06x", id);
365         return id;
366 }
367
368 static quadlet_t generate_own_selfid(struct ti_lynx *lynx,
369                                      struct hpsb_host *host)
370 {
371         quadlet_t lsid;
372         char phyreg[7];
373         int i;
374
375         phyreg[0] = lynx->phy_reg0;
376         for (i = 1; i < 7; i++) {
377                 phyreg[i] = get_phy_reg(lynx, i);
378         }
379
380         /* FIXME? We assume a TSB21LV03A phy here.  This code doesn't support
381            more than 3 ports on the PHY anyway. */
382
383         lsid = 0x80400000 | ((phyreg[0] & 0xfc) << 22);
384         lsid |= (phyreg[1] & 0x3f) << 16; /* gap count */
385         lsid |= (phyreg[2] & 0xc0) << 8; /* max speed */
386         if (!hpsb_disable_irm)
387                 lsid |= (phyreg[6] & 0x01) << 11; /* contender (phy dependent) */
388         /* lsid |= 1 << 11; *//* set contender (hack) */
389         lsid |= (phyreg[6] & 0x10) >> 3; /* initiated reset */
390
391         for (i = 0; i < (phyreg[2] & 0xf); i++) { /* ports */
392                 if (phyreg[3 + i] & 0x4) {
393                         lsid |= (((phyreg[3 + i] & 0x8) | 0x10) >> 3)
394                                 << (6 - i*2);
395                 } else {
396                         lsid |= 1 << (6 - i*2);
397                 }
398         }
399
400         cpu_to_be32s(&lsid);
401         PRINT(KERN_DEBUG, lynx->id, "generated own selfid 0x%x", lsid);
402         return lsid;
403 }
404
405 static void handle_selfid(struct ti_lynx *lynx, struct hpsb_host *host)
406 {
407         quadlet_t *q = lynx->rcv_page;
408         int phyid, isroot, size;
409         quadlet_t lsid = 0;
410         int i;
411
412         if (lynx->phy_reg0 == -1 || lynx->selfid_size == -1) return;
413
414         size = lynx->selfid_size;
415         phyid = lynx->phy_reg0;
416
417         i = (size > 16 ? 16 : size) / 4 - 1;
418         while (i >= 0) {
419                 cpu_to_be32s(&q[i]);
420                 i--;
421         }
422
423         if (!lynx->phyic.reg_1394a) {
424                 lsid = generate_own_selfid(lynx, host);
425         }
426
427         isroot = (phyid & 2) != 0;
428         phyid >>= 2;
429         PRINT(KERN_INFO, lynx->id, "SelfID process finished (phyid %d, %s)",
430               phyid, (isroot ? "root" : "not root"));
431         reg_write(lynx, LINK_ID, (0xffc0 | phyid) << 16);
432
433         if (!lynx->phyic.reg_1394a && !size) {
434                 hpsb_selfid_received(host, lsid);
435         }
436
437         while (size > 0) {
438                 struct selfid *sid = (struct selfid *)q;
439
440                 if (!lynx->phyic.reg_1394a && !sid->extended
441                     && (sid->phy_id == (phyid + 1))) {
442                         hpsb_selfid_received(host, lsid);
443                 }
444
445                 if (q[0] == ~q[1]) {
446                         PRINT(KERN_DEBUG, lynx->id, "SelfID packet 0x%x rcvd",
447                               q[0]);
448                         hpsb_selfid_received(host, q[0]);
449                 } else {
450                         PRINT(KERN_INFO, lynx->id,
451                               "inconsistent selfid 0x%x/0x%x", q[0], q[1]);
452                 }
453                 q += 2;
454                 size -= 8;
455         }
456
457         if (!lynx->phyic.reg_1394a && isroot && phyid != 0) {
458                 hpsb_selfid_received(host, lsid);
459         }
460
461         hpsb_selfid_complete(host, phyid, isroot);
462
463         if (host->in_bus_reset) return; /* in bus reset again */
464
465         if (isroot) reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_CYCMASTER); //FIXME: I do not think, we need this here
466         reg_set_bits(lynx, LINK_CONTROL,
467                      LINK_CONTROL_RCV_CMP_VALID | LINK_CONTROL_TX_ASYNC_EN
468                      | LINK_CONTROL_RX_ASYNC_EN | LINK_CONTROL_CYCTIMEREN);
469 }
470
471
472
473 /* This must be called with the respective queue_lock held. */
474 static void send_next(struct ti_lynx *lynx, int what)
475 {
476         struct ti_pcl pcl;
477         struct lynx_send_data *d;
478         struct hpsb_packet *packet;
479
480         d = (what == hpsb_iso ? &lynx->iso_send : &lynx->async);
481         if (!list_empty(&d->pcl_queue)) {
482                 PRINT(KERN_ERR, lynx->id, "trying to queue a new packet in nonempty fifo");
483                 BUG();
484         }
485
486         packet = driver_packet(d->queue.next);
487         list_move_tail(&packet->driver_list, &d->pcl_queue);
488
489         d->header_dma = pci_map_single(lynx->dev, packet->header,
490                                        packet->header_size, PCI_DMA_TODEVICE);
491         if (packet->data_size) {
492                 d->data_dma = pci_map_single(lynx->dev, packet->data,
493                                              packet->data_size,
494                                              PCI_DMA_TODEVICE);
495         } else {
496                 d->data_dma = 0;
497         }
498
499         pcl.next = PCL_NEXT_INVALID;
500         pcl.async_error_next = PCL_NEXT_INVALID;
501         pcl.pcl_status = 0;
502         pcl.buffer[0].control = packet->speed_code << 14 | packet->header_size;
503 #ifndef __BIG_ENDIAN
504         pcl.buffer[0].control |= PCL_BIGENDIAN;
505 #endif
506         pcl.buffer[0].pointer = d->header_dma;
507         pcl.buffer[1].control = PCL_LAST_BUFF | packet->data_size;
508         pcl.buffer[1].pointer = d->data_dma;
509
510         switch (packet->type) {
511         case hpsb_async:
512                 pcl.buffer[0].control |= PCL_CMD_XMT;
513                 break;
514         case hpsb_iso:
515                 pcl.buffer[0].control |= PCL_CMD_XMT | PCL_ISOMODE;
516                 break;
517         case hpsb_raw:
518                 pcl.buffer[0].control |= PCL_CMD_UNFXMT;
519                 break;
520         }
521
522         put_pcl(lynx, d->pcl, &pcl);
523         run_pcl(lynx, d->pcl_start, d->channel);
524 }
525
526
527 /* called from subsystem core */
528 static int lynx_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
529 {
530         struct ti_lynx *lynx = host->hostdata;
531         struct lynx_send_data *d;
532         unsigned long flags;
533
534         if (packet->data_size >= 4096) {
535                 PRINT(KERN_ERR, lynx->id, "transmit packet data too big (%Zd)",
536                       packet->data_size);
537                 return -EOVERFLOW;
538         }
539
540         switch (packet->type) {
541         case hpsb_async:
542         case hpsb_raw:
543                 d = &lynx->async;
544                 break;
545         case hpsb_iso:
546                 d = &lynx->iso_send;
547                 break;
548         default:
549                 PRINT(KERN_ERR, lynx->id, "invalid packet type %d",
550                       packet->type);
551                 return -EINVAL;
552         }
553
554         if (packet->tcode == TCODE_WRITEQ
555             || packet->tcode == TCODE_READQ_RESPONSE) {
556                 cpu_to_be32s(&packet->header[3]);
557         }
558
559         spin_lock_irqsave(&d->queue_lock, flags);
560
561         list_add_tail(&packet->driver_list, &d->queue);
562         if (list_empty(&d->pcl_queue))
563                 send_next(lynx, packet->type);
564
565         spin_unlock_irqrestore(&d->queue_lock, flags);
566
567         return 0;
568 }
569
570
571 /* called from subsystem core */
572 static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
573 {
574         struct ti_lynx *lynx = host->hostdata;
575         int retval = 0;
576         struct hpsb_packet *packet;
577         LIST_HEAD(packet_list);
578         unsigned long flags;
579         int phy_reg;
580
581         switch (cmd) {
582         case RESET_BUS:
583                 if (reg_read(lynx, LINK_INT_STATUS) & LINK_INT_PHY_BUSRESET) {
584                         retval = 0;
585                         break;
586                 }
587
588                 switch (arg) {
589                 case SHORT_RESET:
590                         if (lynx->phyic.reg_1394a) {
591                                 phy_reg = get_phy_reg(lynx, 5);
592                                 if (phy_reg == -1) {
593                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
594                                         retval = -1;
595                                         break;
596                                 }
597                                 phy_reg |= 0x40;
598
599                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset) on request");
600
601                                 lynx->selfid_size = -1;
602                                 lynx->phy_reg0 = -1;
603                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
604                                 break;
605                         } else {
606                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
607                                 /* fall through to long bus reset */
608                         }
609                 case LONG_RESET:
610                         phy_reg = get_phy_reg(lynx, 1);
611                         if (phy_reg == -1) {
612                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
613                                 retval = -1;
614                                 break;
615                         }
616                         phy_reg |= 0x40;
617
618                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset) on request");
619
620                         lynx->selfid_size = -1;
621                         lynx->phy_reg0 = -1;
622                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB, set IBR */
623                         break;
624                 case SHORT_RESET_NO_FORCE_ROOT:
625                         if (lynx->phyic.reg_1394a) {
626                                 phy_reg = get_phy_reg(lynx, 1);
627                                 if (phy_reg == -1) {
628                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
629                                         retval = -1;
630                                         break;
631                                 }
632                                 if (phy_reg & 0x80) {
633                                         phy_reg &= ~0x80;
634                                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB */
635                                 }
636
637                                 phy_reg = get_phy_reg(lynx, 5);
638                                 if (phy_reg == -1) {
639                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
640                                         retval = -1;
641                                         break;
642                                 }
643                                 phy_reg |= 0x40;
644
645                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset, no force_root) on request");
646
647                                 lynx->selfid_size = -1;
648                                 lynx->phy_reg0 = -1;
649                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
650                                 break;
651                         } else {
652                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
653                                 /* fall through to long bus reset */
654                         }
655                 case LONG_RESET_NO_FORCE_ROOT:
656                         phy_reg = get_phy_reg(lynx, 1);
657                         if (phy_reg == -1) {
658                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
659                                 retval = -1;
660                                 break;
661                         }
662                         phy_reg &= ~0x80;
663                         phy_reg |= 0x40;
664
665                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset, no force_root) on request");
666
667                         lynx->selfid_size = -1;
668                         lynx->phy_reg0 = -1;
669                         set_phy_reg(lynx, 1, phy_reg); /* clear RHB, set IBR */
670                         break;
671                 case SHORT_RESET_FORCE_ROOT:
672                         if (lynx->phyic.reg_1394a) {
673                                 phy_reg = get_phy_reg(lynx, 1);
674                                 if (phy_reg == -1) {
675                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
676                                         retval = -1;
677                                         break;
678                                 }
679                                 if (!(phy_reg & 0x80)) {
680                                         phy_reg |= 0x80;
681                                         set_phy_reg(lynx, 1, phy_reg); /* set RHB */
682                                 }
683
684                                 phy_reg = get_phy_reg(lynx, 5);
685                                 if (phy_reg == -1) {
686                                         PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
687                                         retval = -1;
688                                         break;
689                                 }
690                                 phy_reg |= 0x40;
691
692                                 PRINT(KERN_INFO, lynx->id, "resetting bus (short bus reset, force_root set) on request");
693
694                                 lynx->selfid_size = -1;
695                                 lynx->phy_reg0 = -1;
696                                 set_phy_reg(lynx, 5, phy_reg); /* set ISBR */
697                                 break;
698                         } else {
699                                 PRINT(KERN_INFO, lynx->id, "cannot do short bus reset, because of old phy");
700                                 /* fall through to long bus reset */
701                         }
702                 case LONG_RESET_FORCE_ROOT:
703                         phy_reg = get_phy_reg(lynx, 1);
704                         if (phy_reg == -1) {
705                                 PRINT(KERN_ERR, lynx->id, "cannot reset bus, because read phy reg failed");
706                                 retval = -1;
707                                 break;
708                         }
709                         phy_reg |= 0xc0;
710
711                         PRINT(KERN_INFO, lynx->id, "resetting bus (long bus reset, force_root set) on request");
712
713                         lynx->selfid_size = -1;
714                         lynx->phy_reg0 = -1;
715                         set_phy_reg(lynx, 1, phy_reg); /* set IBR and RHB */
716                         break;
717                 default:
718                         PRINT(KERN_ERR, lynx->id, "unknown argument for reset_bus command %d", arg);
719                         retval = -1;
720                 }
721
722                 break;
723
724         case GET_CYCLE_COUNTER:
725                 retval = reg_read(lynx, CYCLE_TIMER);
726                 break;
727
728         case SET_CYCLE_COUNTER:
729                 reg_write(lynx, CYCLE_TIMER, arg);
730                 break;
731
732         case SET_BUS_ID:
733                 reg_write(lynx, LINK_ID,
734                           (arg << 22) | (reg_read(lynx, LINK_ID) & 0x003f0000));
735                 break;
736
737         case ACT_CYCLE_MASTER:
738                 if (arg) {
739                         reg_set_bits(lynx, LINK_CONTROL,
740                                      LINK_CONTROL_CYCMASTER);
741                 } else {
742                         reg_clear_bits(lynx, LINK_CONTROL,
743                                        LINK_CONTROL_CYCMASTER);
744                 }
745                 break;
746
747         case CANCEL_REQUESTS:
748                 spin_lock_irqsave(&lynx->async.queue_lock, flags);
749
750                 reg_write(lynx, DMA_CHAN_CTRL(CHANNEL_ASYNC_SEND), 0);
751                 list_splice(&lynx->async.queue, &packet_list);
752                 INIT_LIST_HEAD(&lynx->async.queue);
753
754                 if (list_empty(&lynx->async.pcl_queue)) {
755                         spin_unlock_irqrestore(&lynx->async.queue_lock, flags);
756                         PRINTD(KERN_DEBUG, lynx->id, "no async packet in PCL to cancel");
757                 } else {
758                         struct ti_pcl pcl;
759                         u32 ack;
760                         struct hpsb_packet *packet;
761
762                         PRINT(KERN_INFO, lynx->id, "cancelling async packet, that was already in PCL");
763
764                         get_pcl(lynx, lynx->async.pcl, &pcl);
765
766                         packet = driver_packet(lynx->async.pcl_queue.next);
767                         list_del_init(&packet->driver_list);
768
769                         pci_unmap_single(lynx->dev, lynx->async.header_dma,
770                                          packet->header_size, PCI_DMA_TODEVICE);
771                         if (packet->data_size) {
772                                 pci_unmap_single(lynx->dev, lynx->async.data_dma,
773                                                  packet->data_size, PCI_DMA_TODEVICE);
774                         }
775
776                         spin_unlock_irqrestore(&lynx->async.queue_lock, flags);
777
778                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
779                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
780                                         ack = (pcl.pcl_status >> 15) & 0xf;
781                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
782                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
783                                 } else {
784                                         ack = (pcl.pcl_status >> 15) & 0xf;
785                                 }
786                         } else {
787                                 PRINT(KERN_INFO, lynx->id, "async packet was not completed");
788                                 ack = ACKX_ABORTED;
789                         }
790                         hpsb_packet_sent(host, packet, ack);
791                 }
792
793                 while (!list_empty(&packet_list)) {
794                         packet = driver_packet(packet_list.next);
795                         list_del_init(&packet->driver_list);
796                         hpsb_packet_sent(host, packet, ACKX_ABORTED);
797                 }
798
799                 break;
800
801         case ISO_LISTEN_CHANNEL:
802                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
803
804                 if (lynx->iso_rcv.chan_count++ == 0) {
805                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
806                                   DMA_WORD1_CMP_ENABLE_MASTER);
807                 }
808
809                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
810                 break;
811
812         case ISO_UNLISTEN_CHANNEL:
813                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
814
815                 if (--lynx->iso_rcv.chan_count == 0) {
816                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
817                                   0);
818                 }
819
820                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
821                 break;
822
823         default:
824                 PRINT(KERN_ERR, lynx->id, "unknown devctl command %d", cmd);
825                 retval = -1;
826         }
827
828         return retval;
829 }
830
831
832 /***************************************
833  * IEEE-1394 functionality section END *
834  ***************************************/
835
836
837 /********************************************************
838  * Global stuff (interrupt handler, init/shutdown code) *
839  ********************************************************/
840
841
842 static irqreturn_t lynx_irq_handler(int irq, void *dev_id)
843 {
844         struct ti_lynx *lynx = (struct ti_lynx *)dev_id;
845         struct hpsb_host *host = lynx->host;
846         u32 intmask;
847         u32 linkint;
848
849         linkint = reg_read(lynx, LINK_INT_STATUS);
850         intmask = reg_read(lynx, PCI_INT_STATUS);
851
852         if (!(intmask & PCI_INT_INT_PEND))
853                 return IRQ_NONE;
854
855         PRINTD(KERN_DEBUG, lynx->id, "interrupt: 0x%08x / 0x%08x", intmask,
856                linkint);
857
858         reg_write(lynx, LINK_INT_STATUS, linkint);
859         reg_write(lynx, PCI_INT_STATUS, intmask);
860
861         if (intmask & PCI_INT_1394) {
862                 if (linkint & LINK_INT_PHY_TIMEOUT) {
863                         PRINT(KERN_INFO, lynx->id, "PHY timeout occurred");
864                 }
865                 if (linkint & LINK_INT_PHY_BUSRESET) {
866                         PRINT(KERN_INFO, lynx->id, "bus reset interrupt");
867                         lynx->selfid_size = -1;
868                         lynx->phy_reg0 = -1;
869                         if (!host->in_bus_reset)
870                                 hpsb_bus_reset(host);
871                 }
872                 if (linkint & LINK_INT_PHY_REG_RCVD) {
873                         u32 reg;
874
875                         spin_lock(&lynx->phy_reg_lock);
876                         reg = reg_read(lynx, LINK_PHY);
877                         spin_unlock(&lynx->phy_reg_lock);
878
879                         if (!host->in_bus_reset) {
880                                 PRINT(KERN_INFO, lynx->id,
881                                       "phy reg received without reset");
882                         } else if (reg & 0xf00) {
883                                 PRINT(KERN_INFO, lynx->id,
884                                       "unsolicited phy reg %d received",
885                                       (reg >> 8) & 0xf);
886                         } else {
887                                 lynx->phy_reg0 = reg & 0xff;
888                                 handle_selfid(lynx, host);
889                         }
890                 }
891                 if (linkint & LINK_INT_ISO_STUCK) {
892                         PRINT(KERN_INFO, lynx->id, "isochronous transmitter stuck");
893                 }
894                 if (linkint & LINK_INT_ASYNC_STUCK) {
895                         PRINT(KERN_INFO, lynx->id, "asynchronous transmitter stuck");
896                 }
897                 if (linkint & LINK_INT_SENT_REJECT) {
898                         PRINT(KERN_INFO, lynx->id, "sent reject");
899                 }
900                 if (linkint & LINK_INT_TX_INVALID_TC) {
901                         PRINT(KERN_INFO, lynx->id, "invalid transaction code");
902                 }
903                 if (linkint & LINK_INT_GRF_OVERFLOW) {
904                         /* flush FIFO if overflow happens during reset */
905                         if (host->in_bus_reset)
906                                 reg_write(lynx, FIFO_CONTROL,
907                                           FIFO_CONTROL_GRF_FLUSH);
908                         PRINT(KERN_INFO, lynx->id, "GRF overflow");
909                 }
910                 if (linkint & LINK_INT_ITF_UNDERFLOW) {
911                         PRINT(KERN_INFO, lynx->id, "ITF underflow");
912                 }
913                 if (linkint & LINK_INT_ATF_UNDERFLOW) {
914                         PRINT(KERN_INFO, lynx->id, "ATF underflow");
915                 }
916         }
917
918         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ISO_RCV)) {
919                 PRINTD(KERN_DEBUG, lynx->id, "iso receive");
920
921                 spin_lock(&lynx->iso_rcv.lock);
922
923                 lynx->iso_rcv.stat[lynx->iso_rcv.next] =
924                         reg_read(lynx, DMA_CHAN_STAT(CHANNEL_ISO_RCV));
925
926                 lynx->iso_rcv.used++;
927                 lynx->iso_rcv.next = (lynx->iso_rcv.next + 1) % NUM_ISORCV_PCL;
928
929                 if ((lynx->iso_rcv.next == lynx->iso_rcv.last)
930                     || !lynx->iso_rcv.chan_count) {
931                         PRINTD(KERN_DEBUG, lynx->id, "stopped");
932                         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV), 0);
933                 }
934
935                 run_sub_pcl(lynx, lynx->iso_rcv.pcl_start, lynx->iso_rcv.next,
936                             CHANNEL_ISO_RCV);
937
938                 spin_unlock(&lynx->iso_rcv.lock);
939
940                 tasklet_schedule(&lynx->iso_rcv.tq);
941         }
942
943         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ASYNC_SEND)) {
944                 PRINTD(KERN_DEBUG, lynx->id, "async sent");
945                 spin_lock(&lynx->async.queue_lock);
946
947                 if (list_empty(&lynx->async.pcl_queue)) {
948                         spin_unlock(&lynx->async.queue_lock);
949                         PRINT(KERN_WARNING, lynx->id, "async dma halted, but no queued packet (maybe it was cancelled)");
950                 } else {
951                         struct ti_pcl pcl;
952                         u32 ack;
953                         struct hpsb_packet *packet;
954
955                         get_pcl(lynx, lynx->async.pcl, &pcl);
956
957                         packet = driver_packet(lynx->async.pcl_queue.next);
958                         list_del_init(&packet->driver_list);
959
960                         pci_unmap_single(lynx->dev, lynx->async.header_dma,
961                                          packet->header_size, PCI_DMA_TODEVICE);
962                         if (packet->data_size) {
963                                 pci_unmap_single(lynx->dev, lynx->async.data_dma,
964                                                  packet->data_size, PCI_DMA_TODEVICE);
965                         }
966
967                         if (!list_empty(&lynx->async.queue)) {
968                                 send_next(lynx, hpsb_async);
969                         }
970
971                         spin_unlock(&lynx->async.queue_lock);
972
973                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
974                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
975                                         ack = (pcl.pcl_status >> 15) & 0xf;
976                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
977                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
978                                 } else {
979                                         ack = (pcl.pcl_status >> 15) & 0xf;
980                                 }
981                         } else {
982                                 PRINT(KERN_INFO, lynx->id, "async packet was not completed");
983                                 ack = ACKX_SEND_ERROR;
984                         }
985                         hpsb_packet_sent(host, packet, ack);
986                 }
987         }
988
989         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ISO_SEND)) {
990                 PRINTD(KERN_DEBUG, lynx->id, "iso sent");
991                 spin_lock(&lynx->iso_send.queue_lock);
992
993                 if (list_empty(&lynx->iso_send.pcl_queue)) {
994                         spin_unlock(&lynx->iso_send.queue_lock);
995                         PRINT(KERN_ERR, lynx->id, "iso send dma halted, but no queued packet");
996                 } else {
997                         struct ti_pcl pcl;
998                         u32 ack;
999                         struct hpsb_packet *packet;
1000
1001                         get_pcl(lynx, lynx->iso_send.pcl, &pcl);
1002
1003                         packet = driver_packet(lynx->iso_send.pcl_queue.next);
1004                         list_del_init(&packet->driver_list);
1005
1006                         pci_unmap_single(lynx->dev, lynx->iso_send.header_dma,
1007                                          packet->header_size, PCI_DMA_TODEVICE);
1008                         if (packet->data_size) {
1009                                 pci_unmap_single(lynx->dev, lynx->iso_send.data_dma,
1010                                                  packet->data_size, PCI_DMA_TODEVICE);
1011                         }
1012
1013                         if (!list_empty(&lynx->iso_send.queue)) {
1014                                 send_next(lynx, hpsb_iso);
1015                         }
1016
1017                         spin_unlock(&lynx->iso_send.queue_lock);
1018
1019                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
1020                                 if (pcl.pcl_status & DMA_CHAN_STAT_SPECIALACK) {
1021                                         ack = (pcl.pcl_status >> 15) & 0xf;
1022                                         PRINTD(KERN_INFO, lynx->id, "special ack %d", ack);
1023                                         ack = (ack == 1 ? ACKX_TIMEOUT : ACKX_SEND_ERROR);
1024                                 } else {
1025                                         ack = (pcl.pcl_status >> 15) & 0xf;
1026                                 }
1027                         } else {
1028                                 PRINT(KERN_INFO, lynx->id, "iso send packet was not completed");
1029                                 ack = ACKX_SEND_ERROR;
1030                         }
1031
1032                         hpsb_packet_sent(host, packet, ack); //FIXME: maybe we should just use ACK_COMPLETE and ACKX_SEND_ERROR
1033                 }
1034         }
1035
1036         if (intmask & PCI_INT_DMA_HLT(CHANNEL_ASYNC_RCV)) {
1037                 /* general receive DMA completed */
1038                 int stat = reg_read(lynx, DMA_CHAN_STAT(CHANNEL_ASYNC_RCV));
1039
1040                 PRINTD(KERN_DEBUG, lynx->id, "received packet size %d",
1041                        stat & 0x1fff);
1042
1043                 if (stat & DMA_CHAN_STAT_SELFID) {
1044                         lynx->selfid_size = stat & 0x1fff;
1045                         handle_selfid(lynx, host);
1046                 } else {
1047                         quadlet_t *q_data = lynx->rcv_page;
1048                         if ((*q_data >> 4 & 0xf) == TCODE_READQ_RESPONSE
1049                             || (*q_data >> 4 & 0xf) == TCODE_WRITEQ) {
1050                                 cpu_to_be32s(q_data + 3);
1051                         }
1052                         hpsb_packet_received(host, q_data, stat & 0x1fff, 0);
1053                 }
1054
1055                 run_pcl(lynx, lynx->rcv_pcl_start, CHANNEL_ASYNC_RCV);
1056         }
1057
1058         return IRQ_HANDLED;
1059 }
1060
1061
1062 static void iso_rcv_bh(struct ti_lynx *lynx)
1063 {
1064         unsigned int idx;
1065         quadlet_t *data;
1066         unsigned long flags;
1067
1068         spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
1069
1070         while (lynx->iso_rcv.used) {
1071                 idx = lynx->iso_rcv.last;
1072                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
1073
1074                 data = lynx->iso_rcv.page[idx / ISORCV_PER_PAGE]
1075                         + (idx % ISORCV_PER_PAGE) * MAX_ISORCV_SIZE;
1076
1077                 if ((*data >> 16) + 4 != (lynx->iso_rcv.stat[idx] & 0x1fff)) {
1078                         PRINT(KERN_ERR, lynx->id,
1079                               "iso length mismatch 0x%08x/0x%08x", *data,
1080                               lynx->iso_rcv.stat[idx]);
1081                 }
1082
1083                 if (lynx->iso_rcv.stat[idx]
1084                     & (DMA_CHAN_STAT_PCIERR | DMA_CHAN_STAT_PKTERR)) {
1085                         PRINT(KERN_INFO, lynx->id,
1086                               "iso receive error on %d to 0x%p", idx, data);
1087                 } else {
1088                         hpsb_packet_received(lynx->host, data,
1089                                              lynx->iso_rcv.stat[idx] & 0x1fff,
1090                                              0);
1091                 }
1092
1093                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
1094                 lynx->iso_rcv.last = (idx + 1) % NUM_ISORCV_PCL;
1095                 lynx->iso_rcv.used--;
1096         }
1097
1098         if (lynx->iso_rcv.chan_count) {
1099                 reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV),
1100                           DMA_WORD1_CMP_ENABLE_MASTER);
1101         }
1102         spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
1103 }
1104
1105
1106 static void remove_card(struct pci_dev *dev)
1107 {
1108         struct ti_lynx *lynx;
1109         struct device *lynx_dev;
1110         int i;
1111
1112         lynx = pci_get_drvdata(dev);
1113         if (!lynx) return;
1114         pci_set_drvdata(dev, NULL);
1115
1116         lynx_dev = get_device(&lynx->host->device);
1117
1118         switch (lynx->state) {
1119         case is_host:
1120                 reg_write(lynx, PCI_INT_ENABLE, 0);
1121                 hpsb_remove_host(lynx->host);
1122         case have_intr:
1123                 reg_write(lynx, PCI_INT_ENABLE, 0);
1124                 free_irq(lynx->dev->irq, lynx);
1125
1126                 /* Disable IRM Contender and LCtrl */
1127                 if (lynx->phyic.reg_1394a)
1128                         set_phy_reg(lynx, 4, ~0xc0 & get_phy_reg(lynx, 4));
1129
1130                 /* Let all other nodes know to ignore us */
1131                 lynx_devctl(lynx->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
1132
1133         case have_iomappings:
1134                 reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
1135                 /* Fix buggy cards with autoboot pin not tied low: */
1136                 reg_write(lynx, DMA0_CHAN_CTRL, 0);
1137                 iounmap(lynx->registers);
1138                 iounmap(lynx->local_rom);
1139                 iounmap(lynx->local_ram);
1140                 iounmap(lynx->aux_port);
1141         case have_1394_buffers:
1142                 for (i = 0; i < ISORCV_PAGES; i++) {
1143                         if (lynx->iso_rcv.page[i]) {
1144                                 pci_free_consistent(lynx->dev, PAGE_SIZE,
1145                                                     lynx->iso_rcv.page[i],
1146                                                     lynx->iso_rcv.page_dma[i]);
1147                         }
1148                 }
1149                 pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page,
1150                                     lynx->rcv_page_dma);
1151         case have_aux_buf:
1152         case have_pcl_mem:
1153                 pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem,
1154                                     lynx->pcl_mem_dma);
1155         case clear:
1156                 /* do nothing - already freed */
1157                 ;
1158         }
1159
1160         tasklet_kill(&lynx->iso_rcv.tq);
1161
1162         if (lynx_dev)
1163                 put_device(lynx_dev);
1164 }
1165
1166
1167 static int __devinit add_card(struct pci_dev *dev,
1168                               const struct pci_device_id *devid_is_unused)
1169 {
1170 #define FAIL(fmt, args...) do { \
1171         PRINT_G(KERN_ERR, fmt , ## args); \
1172         remove_card(dev); \
1173         return error; \
1174         } while (0)
1175
1176         char irq_buf[16];
1177         struct hpsb_host *host;
1178         struct ti_lynx *lynx; /* shortcut to currently handled device */
1179         struct ti_pcl pcl;
1180         u32 *pcli;
1181         int i;
1182         int error;
1183
1184         error = -ENXIO;
1185
1186         if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
1187                 FAIL("DMA address limits not supported for PCILynx hardware");
1188         if (pci_enable_device(dev))
1189                 FAIL("failed to enable PCILynx hardware");
1190         pci_set_master(dev);
1191
1192         error = -ENOMEM;
1193
1194         host = hpsb_alloc_host(&lynx_driver, sizeof(struct ti_lynx), &dev->dev);
1195         if (!host) FAIL("failed to allocate control structure memory");
1196
1197         lynx = host->hostdata;
1198         lynx->id = card_id++;
1199         lynx->dev = dev;
1200         lynx->state = clear;
1201         lynx->host = host;
1202         host->pdev = dev;
1203         pci_set_drvdata(dev, lynx);
1204
1205         spin_lock_init(&lynx->lock);
1206         spin_lock_init(&lynx->phy_reg_lock);
1207
1208         lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE,
1209                                              &lynx->pcl_mem_dma);
1210
1211         if (lynx->pcl_mem != NULL) {
1212                 lynx->state = have_pcl_mem;
1213                 PRINT(KERN_INFO, lynx->id,
1214                       "allocated PCL memory %d Bytes @ 0x%p", LOCALRAM_SIZE,
1215                       lynx->pcl_mem);
1216         } else {
1217                 FAIL("failed to allocate PCL memory area");
1218         }
1219
1220         lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE,
1221                                               &lynx->rcv_page_dma);
1222         if (lynx->rcv_page == NULL) {
1223                 FAIL("failed to allocate receive buffer");
1224         }
1225         lynx->state = have_1394_buffers;
1226
1227         for (i = 0; i < ISORCV_PAGES; i++) {
1228                 lynx->iso_rcv.page[i] =
1229                         pci_alloc_consistent(dev, PAGE_SIZE,
1230                                              &lynx->iso_rcv.page_dma[i]);
1231                 if (lynx->iso_rcv.page[i] == NULL) {
1232                         FAIL("failed to allocate iso receive buffers");
1233                 }
1234         }
1235
1236         lynx->registers = ioremap_nocache(pci_resource_start(dev,0),
1237                                           PCILYNX_MAX_REGISTER);
1238         lynx->local_ram = ioremap(pci_resource_start(dev,1), PCILYNX_MAX_MEMORY);
1239         lynx->aux_port  = ioremap(pci_resource_start(dev,2), PCILYNX_MAX_MEMORY);
1240         lynx->local_rom = ioremap(pci_resource_start(dev,PCI_ROM_RESOURCE),
1241                                   PCILYNX_MAX_MEMORY);
1242         lynx->state = have_iomappings;
1243
1244         if (lynx->registers == NULL) {
1245                 FAIL("failed to remap registers - card not accessible");
1246         }
1247
1248         reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
1249         /* Fix buggy cards with autoboot pin not tied low: */
1250         reg_write(lynx, DMA0_CHAN_CTRL, 0);
1251
1252         sprintf (irq_buf, "%d", dev->irq);
1253
1254         if (!request_irq(dev->irq, lynx_irq_handler, IRQF_SHARED,
1255                          PCILYNX_DRIVER_NAME, lynx)) {
1256                 PRINT(KERN_INFO, lynx->id, "allocated interrupt %s", irq_buf);
1257                 lynx->state = have_intr;
1258         } else {
1259                 FAIL("failed to allocate shared interrupt %s", irq_buf);
1260         }
1261
1262         /* alloc_pcl return values are not checked, it is expected that the
1263          * provided PCL space is sufficient for the initial allocations */
1264         lynx->rcv_pcl = alloc_pcl(lynx);
1265         lynx->rcv_pcl_start = alloc_pcl(lynx);
1266         lynx->async.pcl = alloc_pcl(lynx);
1267         lynx->async.pcl_start = alloc_pcl(lynx);
1268         lynx->iso_send.pcl = alloc_pcl(lynx);
1269         lynx->iso_send.pcl_start = alloc_pcl(lynx);
1270
1271         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1272                 lynx->iso_rcv.pcl[i] = alloc_pcl(lynx);
1273         }
1274         lynx->iso_rcv.pcl_start = alloc_pcl(lynx);
1275
1276         /* all allocations successful - simple init stuff follows */
1277
1278         reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
1279
1280         tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh,
1281                      (unsigned long)lynx);
1282
1283         spin_lock_init(&lynx->iso_rcv.lock);
1284
1285         spin_lock_init(&lynx->async.queue_lock);
1286         lynx->async.channel = CHANNEL_ASYNC_SEND;
1287         spin_lock_init(&lynx->iso_send.queue_lock);
1288         lynx->iso_send.channel = CHANNEL_ISO_SEND;
1289
1290         PRINT(KERN_INFO, lynx->id, "remapped memory spaces reg 0x%p, rom 0x%p, "
1291               "ram 0x%p, aux 0x%p", lynx->registers, lynx->local_rom,
1292               lynx->local_ram, lynx->aux_port);
1293
1294         /* now, looking for PHY register set */
1295         if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
1296                 lynx->phyic.reg_1394a = 1;
1297                 PRINT(KERN_INFO, lynx->id,
1298                       "found 1394a conform PHY (using extended register set)");
1299                 lynx->phyic.vendor = get_phy_vendorid(lynx);
1300                 lynx->phyic.product = get_phy_productid(lynx);
1301         } else {
1302                 lynx->phyic.reg_1394a = 0;
1303                 PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
1304         }
1305
1306         lynx->selfid_size = -1;
1307         lynx->phy_reg0 = -1;
1308
1309         INIT_LIST_HEAD(&lynx->async.queue);
1310         INIT_LIST_HEAD(&lynx->async.pcl_queue);
1311         INIT_LIST_HEAD(&lynx->iso_send.queue);
1312         INIT_LIST_HEAD(&lynx->iso_send.pcl_queue);
1313
1314         pcl.next = pcl_bus(lynx, lynx->rcv_pcl);
1315         put_pcl(lynx, lynx->rcv_pcl_start, &pcl);
1316
1317         pcl.next = PCL_NEXT_INVALID;
1318         pcl.async_error_next = PCL_NEXT_INVALID;
1319
1320         pcl.buffer[0].control = PCL_CMD_RCV | 16;
1321 #ifndef __BIG_ENDIAN
1322         pcl.buffer[0].control |= PCL_BIGENDIAN;
1323 #endif
1324         pcl.buffer[1].control = PCL_LAST_BUFF | 4080;
1325
1326         pcl.buffer[0].pointer = lynx->rcv_page_dma;
1327         pcl.buffer[1].pointer = lynx->rcv_page_dma + 16;
1328         put_pcl(lynx, lynx->rcv_pcl, &pcl);
1329
1330         pcl.next = pcl_bus(lynx, lynx->async.pcl);
1331         pcl.async_error_next = pcl_bus(lynx, lynx->async.pcl);
1332         put_pcl(lynx, lynx->async.pcl_start, &pcl);
1333
1334         pcl.next = pcl_bus(lynx, lynx->iso_send.pcl);
1335         pcl.async_error_next = PCL_NEXT_INVALID;
1336         put_pcl(lynx, lynx->iso_send.pcl_start, &pcl);
1337
1338         pcl.next = PCL_NEXT_INVALID;
1339         pcl.async_error_next = PCL_NEXT_INVALID;
1340         pcl.buffer[0].control = PCL_CMD_RCV | 4;
1341 #ifndef __BIG_ENDIAN
1342         pcl.buffer[0].control |= PCL_BIGENDIAN;
1343 #endif
1344         pcl.buffer[1].control = PCL_LAST_BUFF | 2044;
1345
1346         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1347                 int page = i / ISORCV_PER_PAGE;
1348                 int sec = i % ISORCV_PER_PAGE;
1349
1350                 pcl.buffer[0].pointer = lynx->iso_rcv.page_dma[page]
1351                         + sec * MAX_ISORCV_SIZE;
1352                 pcl.buffer[1].pointer = pcl.buffer[0].pointer + 4;
1353                 put_pcl(lynx, lynx->iso_rcv.pcl[i], &pcl);
1354         }
1355
1356         pcli = (u32 *)&pcl;
1357         for (i = 0; i < NUM_ISORCV_PCL; i++) {
1358                 pcli[i] = pcl_bus(lynx, lynx->iso_rcv.pcl[i]);
1359         }
1360         put_pcl(lynx, lynx->iso_rcv.pcl_start, &pcl);
1361
1362         /* FIFO sizes from left to right: ITF=48 ATF=48 GRF=160 */
1363         reg_write(lynx, FIFO_SIZES, 0x003030a0);
1364         /* 20 byte threshold before triggering PCI transfer */
1365         reg_write(lynx, DMA_GLOBAL_REGISTER, 0x2<<24);
1366         /* threshold on both send FIFOs before transmitting:
1367            FIFO size - cache line size - 1 */
1368         i = reg_read(lynx, PCI_LATENCY_CACHELINE) & 0xff;
1369         i = 0x30 - i - 1;
1370         reg_write(lynx, FIFO_XMIT_THRESHOLD, (i << 8) | i);
1371
1372         reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_1394);
1373
1374         reg_write(lynx, LINK_INT_ENABLE, LINK_INT_PHY_TIMEOUT
1375                   | LINK_INT_PHY_REG_RCVD  | LINK_INT_PHY_BUSRESET
1376                   | LINK_INT_ISO_STUCK     | LINK_INT_ASYNC_STUCK
1377                   | LINK_INT_SENT_REJECT   | LINK_INT_TX_INVALID_TC
1378                   | LINK_INT_GRF_OVERFLOW  | LINK_INT_ITF_UNDERFLOW
1379                   | LINK_INT_ATF_UNDERFLOW);
1380
1381         reg_write(lynx, DMA_WORD0_CMP_VALUE(CHANNEL_ASYNC_RCV), 0);
1382         reg_write(lynx, DMA_WORD0_CMP_ENABLE(CHANNEL_ASYNC_RCV), 0xa<<4);
1383         reg_write(lynx, DMA_WORD1_CMP_VALUE(CHANNEL_ASYNC_RCV), 0);
1384         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ASYNC_RCV),
1385                   DMA_WORD1_CMP_MATCH_LOCAL_NODE | DMA_WORD1_CMP_MATCH_BROADCAST
1386                   | DMA_WORD1_CMP_MATCH_EXACT    | DMA_WORD1_CMP_MATCH_BUS_BCAST
1387                   | DMA_WORD1_CMP_ENABLE_SELF_ID | DMA_WORD1_CMP_ENABLE_MASTER);
1388
1389         run_pcl(lynx, lynx->rcv_pcl_start, CHANNEL_ASYNC_RCV);
1390
1391         reg_write(lynx, DMA_WORD0_CMP_VALUE(CHANNEL_ISO_RCV), 0);
1392         reg_write(lynx, DMA_WORD0_CMP_ENABLE(CHANNEL_ISO_RCV), 0x9<<4);
1393         reg_write(lynx, DMA_WORD1_CMP_VALUE(CHANNEL_ISO_RCV), 0);
1394         reg_write(lynx, DMA_WORD1_CMP_ENABLE(CHANNEL_ISO_RCV), 0);
1395
1396         run_sub_pcl(lynx, lynx->iso_rcv.pcl_start, 0, CHANNEL_ISO_RCV);
1397
1398         reg_write(lynx, LINK_CONTROL, LINK_CONTROL_RCV_CMP_VALID
1399                   | LINK_CONTROL_TX_ISO_EN   | LINK_CONTROL_RX_ISO_EN
1400                   | LINK_CONTROL_TX_ASYNC_EN | LINK_CONTROL_RX_ASYNC_EN
1401                   | LINK_CONTROL_RESET_TX    | LINK_CONTROL_RESET_RX);
1402
1403         if (!lynx->phyic.reg_1394a) {
1404                 if (!hpsb_disable_irm) {
1405                         /* attempt to enable contender bit -FIXME- would this
1406                          * work elsewhere? */
1407                         reg_set_bits(lynx, GPIO_CTRL_A, 0x1);
1408                         reg_write(lynx, GPIO_DATA_BASE + 0x3c, 0x1);
1409                 }
1410         } else {
1411                 /* set the contender (if appropriate) and LCtrl bit in the
1412                  * extended PHY register set. (Should check that PHY_02_EXTENDED
1413                  * is set in register 2?)
1414                  */
1415                 i = get_phy_reg(lynx, 4);
1416                 i |= PHY_04_LCTRL;
1417                 if (hpsb_disable_irm)
1418                         i &= ~PHY_04_CONTENDER;
1419                 else
1420                         i |= PHY_04_CONTENDER;
1421                 if (i != -1) set_phy_reg(lynx, 4, i);
1422         }
1423         
1424         if (!skip_eeprom)
1425         {
1426                 /* needed for i2c communication with serial eeprom */
1427                 struct i2c_adapter *i2c_ad;
1428                 struct i2c_algo_bit_data i2c_adapter_data;
1429
1430                 error = -ENOMEM;
1431                 i2c_ad = kmemdup(&bit_ops, sizeof(*i2c_ad), GFP_KERNEL);
1432                 if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
1433
1434                 i2c_adapter_data = bit_data;
1435                 i2c_ad->algo_data = &i2c_adapter_data;
1436                 i2c_adapter_data.data = lynx;
1437                 i2c_ad->dev.parent = &dev->dev;
1438
1439                 PRINTD(KERN_DEBUG, lynx->id,"original eeprom control: %d",
1440                        reg_read(lynx, SERIAL_EEPROM_CONTROL));
1441
1442                 /* reset hardware to sane state */
1443                 lynx->i2c_driven_state = 0x00000070;
1444                 reg_write(lynx, SERIAL_EEPROM_CONTROL, lynx->i2c_driven_state);
1445
1446                 if (i2c_bit_add_bus(i2c_ad) < 0)
1447                 {
1448                         kfree(i2c_ad);
1449                         error = -ENXIO;
1450                         FAIL("unable to register i2c");
1451                 }
1452                 else
1453                 {
1454                         /* do i2c stuff */
1455                         unsigned char i2c_cmd = 0x10;
1456                         struct i2c_msg msg[2] = { { 0x50, 0, 1, &i2c_cmd },
1457                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
1458                                                 };
1459
1460                         /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
1461                            do it more efficiently in one transaction rather then using several reads */
1462                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {
1463                                 PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c");
1464                         } else {
1465                                 int i;
1466
1467                                 PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom");
1468                                 /* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a),
1469                                  * generation(1394a) and link_spd(1394a) field and recalculate
1470                                  * the CRC */
1471
1472                                 for (i = 0; i < 5 ; i++)
1473                                         PRINTD(KERN_DEBUG, lynx->id, "Businfo block quadlet %i: %08x",
1474                                                i, be32_to_cpu(lynx->bus_info_block[i]));
1475
1476                                 /* info_length, crc_length and 1394 magic number to check, if it is really a bus info block */
1477                                 if (((be32_to_cpu(lynx->bus_info_block[0]) & 0xffff0000) == 0x04040000) &&
1478                                     (lynx->bus_info_block[1] == __constant_cpu_to_be32(0x31333934)))
1479                                 {
1480                                         PRINT(KERN_DEBUG, lynx->id, "read a valid bus info block from");
1481                                 } else {
1482                                         kfree(i2c_ad);
1483                                         error = -ENXIO;
1484                                         FAIL("read something from serial eeprom, but it does not seem to be a valid bus info block");
1485                                 }
1486
1487                         }
1488
1489                         i2c_del_adapter(i2c_ad);
1490                         kfree(i2c_ad);
1491                 }
1492         }
1493
1494         host->csr.guid_hi = be32_to_cpu(lynx->bus_info_block[3]);
1495         host->csr.guid_lo = be32_to_cpu(lynx->bus_info_block[4]);
1496         host->csr.cyc_clk_acc = (be32_to_cpu(lynx->bus_info_block[2]) >> 16) & 0xff;
1497         host->csr.max_rec = (be32_to_cpu(lynx->bus_info_block[2]) >> 12) & 0xf;
1498         if (!lynx->phyic.reg_1394a)
1499                 host->csr.lnk_spd = (get_phy_reg(lynx, 2) & 0xc0) >> 6;
1500         else
1501                 host->csr.lnk_spd = be32_to_cpu(lynx->bus_info_block[2]) & 0x7;
1502
1503         if (hpsb_add_host(host)) {
1504                 error = -ENOMEM;
1505                 FAIL("Failed to register host with highlevel");
1506         }
1507
1508         lynx->state = is_host;
1509
1510         return 0;
1511 #undef FAIL
1512 }
1513
1514
1515 static struct pci_device_id pci_table[] = {
1516         {
1517                 .vendor =    PCI_VENDOR_ID_TI,
1518                 .device =    PCI_DEVICE_ID_TI_PCILYNX,
1519                 .subvendor = PCI_ANY_ID,
1520                 .subdevice = PCI_ANY_ID,
1521         },
1522         { }                     /* Terminating entry */
1523 };
1524
1525 static struct pci_driver lynx_pci_driver = {
1526         .name =     PCILYNX_DRIVER_NAME,
1527         .id_table = pci_table,
1528         .probe =    add_card,
1529         .remove =   remove_card,
1530 };
1531
1532 static struct hpsb_host_driver lynx_driver = {
1533         .owner =           THIS_MODULE,
1534         .name =            PCILYNX_DRIVER_NAME,
1535         .set_hw_config_rom = NULL,
1536         .transmit_packet = lynx_transmit,
1537         .devctl =          lynx_devctl,
1538         .isoctl =          NULL,
1539 };
1540
1541 MODULE_AUTHOR("Andreas E. Bombe <andreas.bombe@munich.netsurf.de>");
1542 MODULE_DESCRIPTION("driver for Texas Instruments PCI Lynx IEEE-1394 controller");
1543 MODULE_LICENSE("GPL");
1544 MODULE_SUPPORTED_DEVICE("pcilynx");
1545 MODULE_DEVICE_TABLE(pci, pci_table);
1546
1547 static int __init pcilynx_init(void)
1548 {
1549         int ret;
1550
1551         ret = pci_register_driver(&lynx_pci_driver);
1552         if (ret < 0) {
1553                 PRINT_G(KERN_ERR, "PCI module init failed");
1554                 return ret;
1555         }
1556
1557         return 0;
1558 }
1559
1560 static void __exit pcilynx_cleanup(void)
1561 {
1562         pci_unregister_driver(&lynx_pci_driver);
1563 }
1564
1565
1566 module_init(pcilynx_init);
1567 module_exit(pcilynx_cleanup);