git.oblomov.eu Git - linux-2.6/blob - drivers/media/common/tuners/xc5000.c

   1 /*
   2  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
   3  *
   4  *  Copyright (c) 2007 Xceive Corporation
   5  *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
   6  *
   7  *  This program is free software; you can redistribute it and/or modify
   8  *  it under the terms of the GNU General Public License as published by
   9  *  the Free Software Foundation; either version 2 of the License, or
  10  *  (at your option) any later version.
  11  *
  12  *  This program is distributed in the hope that it will be useful,
  13  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  *
  16  *  GNU General Public License for more details.
  17  *
  18  *  You should have received a copy of the GNU General Public License
  19  *  along with this program; if not, write to the Free Software
  20  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/moduleparam.h>
  25 #include <linux/videodev2.h>
  26 #include <linux/delay.h>
  27 #include <linux/dvb/frontend.h>
  28 #include <linux/i2c.h>
  29
  30 #include "dvb_frontend.h"
  31
  32 #include "xc5000.h"
  33 #include "tuner-i2c.h"
  34
  35 static int debug;
  36 module_param(debug, int, 0644);
  37 MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
  38
  39 static DEFINE_MUTEX(xc5000_list_mutex);
  40 static LIST_HEAD(hybrid_tuner_instance_list);
  41
  42 #define dprintk(level, fmt, arg...) if (debug >= level) \
  43         printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
  44
  45 #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
  46 #define XC5000_DEFAULT_FIRMWARE_SIZE 12332
  47
  48 struct xc5000_priv {
  49         struct tuner_i2c_props i2c_props;
  50         struct list_head hybrid_tuner_instance_list;
  51
  52         u32 if_khz;
  53         u32 freq_hz;
  54         u32 bandwidth;
  55         u8  video_standard;
  56         u8  rf_mode;
  57 };
  58
  59 /* Misc Defines */
  60 #define MAX_TV_STANDARD                 23
  61 #define XC_MAX_I2C_WRITE_LENGTH         64
  62
  63 /* Signal Types */
  64 #define XC_RF_MODE_AIR                  0
  65 #define XC_RF_MODE_CABLE                1
  66
  67 /* Result codes */
  68 #define XC_RESULT_SUCCESS               0
  69 #define XC_RESULT_RESET_FAILURE         1
  70 #define XC_RESULT_I2C_WRITE_FAILURE     2
  71 #define XC_RESULT_I2C_READ_FAILURE      3
  72 #define XC_RESULT_OUT_OF_RANGE          5
  73
  74 /* Product id */
  75 #define XC_PRODUCT_ID_FW_NOT_LOADED     0x2000
  76 #define XC_PRODUCT_ID_FW_LOADED         0x1388
  77
  78 /* Registers */
  79 #define XREG_INIT         0x00
  80 #define XREG_VIDEO_MODE   0x01
  81 #define XREG_AUDIO_MODE   0x02
  82 #define XREG_RF_FREQ      0x03
  83 #define XREG_D_CODE       0x04
  84 #define XREG_IF_OUT       0x05
  85 #define XREG_SEEK_MODE    0x07
  86 #define XREG_POWER_DOWN   0x0A
  87 #define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */
  88 #define XREG_SMOOTHEDCVBS 0x0E
  89 #define XREG_XTALFREQ     0x0F
  90 #define XREG_FINERFFREQ   0x10
  91 #define XREG_DDIMODE      0x11
  92
  93 #define XREG_ADC_ENV      0x00
  94 #define XREG_QUALITY      0x01
  95 #define XREG_FRAME_LINES  0x02
  96 #define XREG_HSYNC_FREQ   0x03
  97 #define XREG_LOCK         0x04
  98 #define XREG_FREQ_ERROR   0x05
  99 #define XREG_SNR          0x06
 100 #define XREG_VERSION      0x07
 101 #define XREG_PRODUCT_ID   0x08
 102 #define XREG_BUSY         0x09
 103
 104 /*
 105    Basic firmware description. This will remain with
 106    the driver for documentation purposes.
 107
 108    This represents an I2C firmware file encoded as a
 109    string of unsigned char. Format is as follows:
 110
 111    char[0  ]=len0_MSB  -> len = len_MSB * 256 + len_LSB
 112    char[1  ]=len0_LSB  -> length of first write transaction
 113    char[2  ]=data0 -> first byte to be sent
 114    char[3  ]=data1
 115    char[4  ]=data2
 116    char[   ]=...
 117    char[M  ]=dataN  -> last byte to be sent
 118    char[M+1]=len1_MSB  -> len = len_MSB * 256 + len_LSB
 119    char[M+2]=len1_LSB  -> length of second write transaction
 120    char[M+3]=data0
 121    char[M+4]=data1
 122    ...
 123    etc.
 124
 125    The [len] value should be interpreted as follows:
 126
 127    len= len_MSB _ len_LSB
 128    len=1111_1111_1111_1111   : End of I2C_SEQUENCE
 129    len=0000_0000_0000_0000   : Reset command: Do hardware reset
 130    len=0NNN_NNNN_NNNN_NNNN   : Normal transaction: number of bytes = {1:32767)
 131    len=1WWW_WWWW_WWWW_WWWW   : Wait command: wait for {1:32767} ms
 132
 133    For the RESET and WAIT commands, the two following bytes will contain
 134    immediately the length of the following transaction.
 135
 136 */
 137 struct XC_TV_STANDARD {
 138         char *Name;
 139         u16 AudioMode;
 140         u16 VideoMode;
 141 };
 142
 143 /* Tuner standards */
 144 #define MN_NTSC_PAL_BTSC        0
 145 #define MN_NTSC_PAL_A2          1
 146 #define MN_NTSC_PAL_EIAJ        2
 147 #define MN_NTSC_PAL_Mono        3
 148 #define BG_PAL_A2               4
 149 #define BG_PAL_NICAM            5
 150 #define BG_PAL_MONO             6
 151 #define I_PAL_NICAM             7
 152 #define I_PAL_NICAM_MONO        8
 153 #define DK_PAL_A2               9
 154 #define DK_PAL_NICAM            10
 155 #define DK_PAL_MONO             11
 156 #define DK_SECAM_A2DK1          12
 157 #define DK_SECAM_A2LDK3         13
 158 #define DK_SECAM_A2MONO         14
 159 #define L_SECAM_NICAM           15
 160 #define LC_SECAM_NICAM          16
 161 #define DTV6                    17
 162 #define DTV8                    18
 163 #define DTV7_8                  19
 164 #define DTV7                    20
 165 #define FM_Radio_INPUT2         21
 166 #define FM_Radio_INPUT1         22
 167
 168 static struct XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
 169         {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020},
 170         {"M/N-NTSC/PAL-A2",   0x0600, 0x8020},
 171         {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020},
 172         {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020},
 173         {"B/G-PAL-A2",        0x0A00, 0x8049},
 174         {"B/G-PAL-NICAM",     0x0C04, 0x8049},
 175         {"B/G-PAL-MONO",      0x0878, 0x8059},
 176         {"I-PAL-NICAM",       0x1080, 0x8009},
 177         {"I-PAL-NICAM-MONO",  0x0E78, 0x8009},
 178         {"D/K-PAL-A2",        0x1600, 0x8009},
 179         {"D/K-PAL-NICAM",     0x0E80, 0x8009},
 180         {"D/K-PAL-MONO",      0x1478, 0x8009},
 181         {"D/K-SECAM-A2 DK1",  0x1200, 0x8009},
 182         {"D/K-SECAM-A2 L/DK3", 0x0E00, 0x8009},
 183         {"D/K-SECAM-A2 MONO", 0x1478, 0x8009},
 184         {"L-SECAM-NICAM",     0x8E82, 0x0009},
 185         {"L'-SECAM-NICAM",    0x8E82, 0x4009},
 186         {"DTV6",              0x00C0, 0x8002},
 187         {"DTV8",              0x00C0, 0x800B},
 188         {"DTV7/8",            0x00C0, 0x801B},
 189         {"DTV7",              0x00C0, 0x8007},
 190         {"FM Radio-INPUT2",   0x9802, 0x9002},
 191         {"FM Radio-INPUT1",   0x0208, 0x9002}
 192 };
 193
 194 static int  xc5000_is_firmware_loaded(struct dvb_frontend *fe);
 195 static int  xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 196 static int  xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 197 static void xc5000_TunerReset(struct dvb_frontend *fe);
 198
 199 static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 200 {
 201         return xc5000_writeregs(priv, buf, len)
 202                 ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS;
 203 }
 204
 205 static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len)
 206 {
 207         return xc5000_readregs(priv, buf, len)
 208                 ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS;
 209 }
 210
 211 static int xc_reset(struct dvb_frontend *fe)
 212 {
 213         xc5000_TunerReset(fe);
 214         return XC_RESULT_SUCCESS;
 215 }
 216
 217 static void xc_wait(int wait_ms)
 218 {
 219         msleep(wait_ms);
 220 }
 221
 222 static void xc5000_TunerReset(struct dvb_frontend *fe)
 223 {
 224         struct xc5000_priv *priv = fe->tuner_priv;
 225         int ret;
 226
 227         dprintk(1, "%s()\n", __func__);
 228
 229         if (fe->callback) {
 230                 ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
 231                                            fe->dvb->priv :
 232                                            priv->i2c_props.adap->algo_data,
 233                                            DVB_FRONTEND_COMPONENT_TUNER,
 234                                            XC5000_TUNER_RESET, 0);
 235                 if (ret)
 236                         printk(KERN_ERR "xc5000: reset failed\n");
 237         } else
 238                 printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
 239 }
 240
 241 static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData)
 242 {
 243         u8 buf[4];
 244         int WatchDogTimer = 5;
 245         int result;
 246
 247         buf[0] = (regAddr >> 8) & 0xFF;
 248         buf[1] = regAddr & 0xFF;
 249         buf[2] = (i2cData >> 8) & 0xFF;
 250         buf[3] = i2cData & 0xFF;
 251         result = xc_send_i2c_data(priv, buf, 4);
 252         if (result == XC_RESULT_SUCCESS) {
 253                 /* wait for busy flag to clear */
 254                 while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) {
 255                         buf[0] = 0;
 256                         buf[1] = XREG_BUSY;
 257
 258                         result = xc_send_i2c_data(priv, buf, 2);
 259                         if (result == XC_RESULT_SUCCESS) {
 260                                 result = xc_read_i2c_data(priv, buf, 2);
 261                                 if (result == XC_RESULT_SUCCESS) {
 262                                         if ((buf[0] == 0) && (buf[1] == 0)) {
 263                                                 /* busy flag cleared */
 264                                         break;
 265                                         } else {
 266                                                 xc_wait(100); /* wait 5 ms */
 267                                                 WatchDogTimer--;
 268                                         }
 269                                 }
 270                         }
 271                 }
 272         }
 273         if (WatchDogTimer < 0)
 274                 result = XC_RESULT_I2C_WRITE_FAILURE;
 275
 276         return result;
 277 }
 278
 279 static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData)
 280 {
 281         u8 buf[2];
 282         int result;
 283
 284         buf[0] = (regAddr >> 8) & 0xFF;
 285         buf[1] = regAddr & 0xFF;
 286         result = xc_send_i2c_data(priv, buf, 2);
 287         if (result != XC_RESULT_SUCCESS)
 288                 return result;
 289
 290         result = xc_read_i2c_data(priv, buf, 2);
 291         if (result != XC_RESULT_SUCCESS)
 292                 return result;
 293
 294         *i2cData = buf[0] * 256 + buf[1];
 295         return result;
 296 }
 297
 298 static int xc_load_i2c_sequence(struct dvb_frontend *fe, const u8 *i2c_sequence)
 299 {
 300         struct xc5000_priv *priv = fe->tuner_priv;
 301
 302         int i, nbytes_to_send, result;
 303         unsigned int len, pos, index;
 304         u8 buf[XC_MAX_I2C_WRITE_LENGTH];
 305
 306         index = 0;
 307         while ((i2c_sequence[index] != 0xFF) ||
 308                 (i2c_sequence[index + 1] != 0xFF)) {
 309                 len = i2c_sequence[index] * 256 + i2c_sequence[index+1];
 310                 if (len == 0x0000) {
 311                         /* RESET command */
 312                         result = xc_reset(fe);
 313                         index += 2;
 314                         if (result != XC_RESULT_SUCCESS)
 315                                 return result;
 316                 } else if (len & 0x8000) {
 317                         /* WAIT command */
 318                         xc_wait(len & 0x7FFF);
 319                         index += 2;
 320                 } else {
 321                         /* Send i2c data whilst ensuring individual transactions
 322                          * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes.
 323                          */
 324                         index += 2;
 325                         buf[0] = i2c_sequence[index];
 326                         buf[1] = i2c_sequence[index + 1];
 327                         pos = 2;
 328                         while (pos < len) {
 329                                 if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2)
 330                                         nbytes_to_send =
 331                                                 XC_MAX_I2C_WRITE_LENGTH;
 332                                 else
 333                                         nbytes_to_send = (len - pos + 2);
 334                                 for (i = 2; i < nbytes_to_send; i++) {
 335                                         buf[i] = i2c_sequence[index + pos +
 336                                                 i - 2];
 337                                 }
 338                                 result = xc_send_i2c_data(priv, buf,
 339                                         nbytes_to_send);
 340
 341                                 if (result != XC_RESULT_SUCCESS)
 342                                         return result;
 343
 344                                 pos += nbytes_to_send - 2;
 345                         }
 346                         index += len;
 347                 }
 348         }
 349         return XC_RESULT_SUCCESS;
 350 }
 351
 352 static int xc_initialize(struct xc5000_priv *priv)
 353 {
 354         dprintk(1, "%s()\n", __func__);
 355         return xc_write_reg(priv, XREG_INIT, 0);
 356 }
 357
 358 static int xc_SetTVStandard(struct xc5000_priv *priv,
 359         u16 VideoMode, u16 AudioMode)
 360 {
 361         int ret;
 362         dprintk(1, "%s(0x%04x,0x%04x)\n", __func__, VideoMode, AudioMode);
 363         dprintk(1, "%s() Standard = %s\n",
 364                 __func__,
 365                 XC5000_Standard[priv->video_standard].Name);
 366
 367         ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode);
 368         if (ret == XC_RESULT_SUCCESS)
 369                 ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode);
 370
 371         return ret;
 372 }
 373
 374 static int xc_shutdown(struct xc5000_priv *priv)
 375 {
 376         return XC_RESULT_SUCCESS;
 377         /* Fixme: cannot bring tuner back alive once shutdown
 378          *        without reloading the driver modules.
 379          *    return xc_write_reg(priv, XREG_POWER_DOWN, 0);
 380          */
 381 }
 382
 383 static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode)
 384 {
 385         dprintk(1, "%s(%d) Source = %s\n", __func__, rf_mode,
 386                 rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE");
 387
 388         if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) {
 389                 rf_mode = XC_RF_MODE_CABLE;
 390                 printk(KERN_ERR
 391                         "%s(), Invalid mode, defaulting to CABLE",
 392                         __func__);
 393         }
 394         return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode);
 395 }
 396
 397 static const struct dvb_tuner_ops xc5000_tuner_ops;
 398
 399 static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz)
 400 {
 401         u16 freq_code;
 402
 403         dprintk(1, "%s(%u)\n", __func__, freq_hz);
 404
 405         if ((freq_hz > xc5000_tuner_ops.info.frequency_max) ||
 406                 (freq_hz < xc5000_tuner_ops.info.frequency_min))
 407                 return XC_RESULT_OUT_OF_RANGE;
 408
 409         freq_code = (u16)(freq_hz / 15625);
 410
 411         return xc_write_reg(priv, XREG_RF_FREQ, freq_code);
 412 }
 413
 414
 415 static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz)
 416 {
 417         u32 freq_code = (freq_khz * 1024)/1000;
 418         dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n",
 419                 __func__, freq_khz, freq_code);
 420
 421         return xc_write_reg(priv, XREG_IF_OUT, freq_code);
 422 }
 423
 424
 425 static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope)
 426 {
 427         return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope);
 428 }
 429
 430 static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz)
 431 {
 432         int result;
 433         u16 regData;
 434         u32 tmp;
 435
 436         result = xc_read_reg(priv, XREG_FREQ_ERROR, &regData);
 437         if (result)
 438                 return result;
 439
 440         tmp = (u32)regData;
 441         (*freq_error_hz) = (tmp * 15625) / 1000;
 442         return result;
 443 }
 444
 445 static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status)
 446 {
 447         return xc_read_reg(priv, XREG_LOCK, lock_status);
 448 }
 449
 450 static int xc_get_version(struct xc5000_priv *priv,
 451         u8 *hw_majorversion, u8 *hw_minorversion,
 452         u8 *fw_majorversion, u8 *fw_minorversion)
 453 {
 454         u16 data;
 455         int result;
 456
 457         result = xc_read_reg(priv, XREG_VERSION, &data);
 458         if (result)
 459                 return result;
 460
 461         (*hw_majorversion) = (data >> 12) & 0x0F;
 462         (*hw_minorversion) = (data >>  8) & 0x0F;
 463         (*fw_majorversion) = (data >>  4) & 0x0F;
 464         (*fw_minorversion) = data & 0x0F;
 465
 466         return 0;
 467 }
 468
 469 static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz)
 470 {
 471         u16 regData;
 472         int result;
 473
 474         result = xc_read_reg(priv, XREG_HSYNC_FREQ, &regData);
 475         if (result)
 476                 return result;
 477
 478         (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100;
 479         return result;
 480 }
 481
 482 static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines)
 483 {
 484         return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines);
 485 }
 486
 487 static int xc_get_quality(struct xc5000_priv *priv, u16 *quality)
 488 {
 489         return xc_read_reg(priv, XREG_QUALITY, quality);
 490 }
 491
 492 static u16 WaitForLock(struct xc5000_priv *priv)
 493 {
 494         u16 lockState = 0;
 495         int watchDogCount = 40;
 496
 497         while ((lockState == 0) && (watchDogCount > 0)) {
 498                 xc_get_lock_status(priv, &lockState);
 499                 if (lockState != 1) {
 500                         xc_wait(5);
 501                         watchDogCount--;
 502                 }
 503         }
 504         return lockState;
 505 }
 506
 507 static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz)
 508 {
 509         int found = 0;
 510
 511         dprintk(1, "%s(%u)\n", __func__, freq_hz);
 512
 513         if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS)
 514                 return 0;
 515
 516         if (WaitForLock(priv) == 1)
 517                 found = 1;
 518
 519         return found;
 520 }
 521
 522 static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
 523 {
 524         u8 buf[2] = { reg >> 8, reg & 0xff };
 525         u8 bval[2] = { 0, 0 };
 526         struct i2c_msg msg[2] = {
 527                 { .addr = priv->i2c_props.addr,
 528                         .flags = 0, .buf = &buf[0], .len = 2 },
 529                 { .addr = priv->i2c_props.addr,
 530                         .flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
 531         };
 532
 533         if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
 534                 printk(KERN_WARNING "xc5000: I2C read failed\n");
 535                 return -EREMOTEIO;
 536         }
 537
 538         *val = (bval[0] << 8) | bval[1];
 539         return 0;
 540 }
 541
 542 static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 543 {
 544         struct i2c_msg msg = { .addr = priv->i2c_props.addr,
 545                 .flags = 0, .buf = buf, .len = len };
 546
 547         if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
 548                 printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n",
 549                         (int)len);
 550                 return -EREMOTEIO;
 551         }
 552         return 0;
 553 }
 554
 555 static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 556 {
 557         struct i2c_msg msg = { .addr = priv->i2c_props.addr,
 558                 .flags = I2C_M_RD, .buf = buf, .len = len };
 559
 560         if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
 561                 printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", (int)len);
 562                 return -EREMOTEIO;
 563         }
 564         return 0;
 565 }
 566
 567 static int xc5000_fwupload(struct dvb_frontend *fe)
 568 {
 569         struct xc5000_priv *priv = fe->tuner_priv;
 570         const struct firmware *fw;
 571         int ret;
 572
 573         /* request the firmware, this will block and timeout */
 574         printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
 575                 XC5000_DEFAULT_FIRMWARE);
 576
 577         ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE,
 578                 &priv->i2c_props.adap->dev);
 579         if (ret) {
 580                 printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
 581                 ret = XC_RESULT_RESET_FAILURE;
 582                 goto out;
 583         } else {
 584                 printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n",
 585                        fw->size);
 586                 ret = XC_RESULT_SUCCESS;
 587         }
 588
 589         if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) {
 590                 printk(KERN_ERR "xc5000: firmware incorrect size\n");
 591                 ret = XC_RESULT_RESET_FAILURE;
 592         } else {
 593                 printk(KERN_INFO "xc5000: firmware upload\n");
 594                 ret = xc_load_i2c_sequence(fe,  fw->data);
 595         }
 596
 597 out:
 598         release_firmware(fw);
 599         return ret;
 600 }
 601
 602 static void xc_debug_dump(struct xc5000_priv *priv)
 603 {
 604         u16 adc_envelope;
 605         u32 freq_error_hz = 0;
 606         u16 lock_status;
 607         u32 hsync_freq_hz = 0;
 608         u16 frame_lines;
 609         u16 quality;
 610         u8 hw_majorversion = 0, hw_minorversion = 0;
 611         u8 fw_majorversion = 0, fw_minorversion = 0;
 612
 613         /* Wait for stats to stabilize.
 614          * Frame Lines needs two frame times after initial lock
 615          * before it is valid.
 616          */
 617         xc_wait(100);
 618
 619         xc_get_ADC_Envelope(priv,  &adc_envelope);
 620         dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope);
 621
 622         xc_get_frequency_error(priv, &freq_error_hz);
 623         dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz);
 624
 625         xc_get_lock_status(priv,  &lock_status);
 626         dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n",
 627                 lock_status);
 628
 629         xc_get_version(priv,  &hw_majorversion, &hw_minorversion,
 630                 &fw_majorversion, &fw_minorversion);
 631         dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n",
 632                 hw_majorversion, hw_minorversion,
 633                 fw_majorversion, fw_minorversion);
 634
 635         xc_get_hsync_freq(priv,  &hsync_freq_hz);
 636         dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz);
 637
 638         xc_get_frame_lines(priv,  &frame_lines);
 639         dprintk(1, "*** Frame lines = %d\n", frame_lines);
 640
 641         xc_get_quality(priv,  &quality);
 642         dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality);
 643 }
 644
 645 static int xc5000_set_params(struct dvb_frontend *fe,
 646         struct dvb_frontend_parameters *params)
 647 {
 648         struct xc5000_priv *priv = fe->tuner_priv;
 649         int ret;
 650
 651         dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
 652
 653         switch (params->u.vsb.modulation) {
 654         case VSB_8:
 655         case VSB_16:
 656                 dprintk(1, "%s() VSB modulation\n", __func__);
 657                 priv->rf_mode = XC_RF_MODE_AIR;
 658                 priv->freq_hz = params->frequency - 1750000;
 659                 priv->bandwidth = BANDWIDTH_6_MHZ;
 660                 priv->video_standard = DTV6;
 661                 break;
 662         case QAM_64:
 663         case QAM_256:
 664         case QAM_AUTO:
 665                 dprintk(1, "%s() QAM modulation\n", __func__);
 666                 priv->rf_mode = XC_RF_MODE_CABLE;
 667                 priv->freq_hz = params->frequency - 1750000;
 668                 priv->bandwidth = BANDWIDTH_6_MHZ;
 669                 priv->video_standard = DTV6;
 670                 break;
 671         default:
 672                 return -EINVAL;
 673         }
 674
 675         dprintk(1, "%s() frequency=%d (compensated)\n",
 676                 __func__, priv->freq_hz);
 677
 678         ret = xc_SetSignalSource(priv, priv->rf_mode);
 679         if (ret != XC_RESULT_SUCCESS) {
 680                 printk(KERN_ERR
 681                         "xc5000: xc_SetSignalSource(%d) failed\n",
 682                         priv->rf_mode);
 683                 return -EREMOTEIO;
 684         }
 685
 686         ret = xc_SetTVStandard(priv,
 687                 XC5000_Standard[priv->video_standard].VideoMode,
 688                 XC5000_Standard[priv->video_standard].AudioMode);
 689         if (ret != XC_RESULT_SUCCESS) {
 690                 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
 691                 return -EREMOTEIO;
 692         }
 693
 694         ret = xc_set_IF_frequency(priv, priv->if_khz);
 695         if (ret != XC_RESULT_SUCCESS) {
 696                 printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
 697                        priv->if_khz);
 698                 return -EIO;
 699         }
 700
 701         xc_tune_channel(priv, priv->freq_hz);
 702
 703         if (debug)
 704                 xc_debug_dump(priv);
 705
 706         return 0;
 707 }
 708
 709 static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
 710 {
 711         struct xc5000_priv *priv = fe->tuner_priv;
 712         int ret;
 713         u16 id;
 714
 715         ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
 716         if (ret == XC_RESULT_SUCCESS) {
 717                 if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
 718                         ret = XC_RESULT_RESET_FAILURE;
 719                 else
 720                         ret = XC_RESULT_SUCCESS;
 721         }
 722
 723         dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
 724                 ret == XC_RESULT_SUCCESS ? "True" : "False", id);
 725         return ret;
 726 }
 727
 728 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
 729
 730 static int xc5000_set_analog_params(struct dvb_frontend *fe,
 731         struct analog_parameters *params)
 732 {
 733         struct xc5000_priv *priv = fe->tuner_priv;
 734         int ret;
 735
 736         if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
 737                 xc_load_fw_and_init_tuner(fe);
 738
 739         dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
 740                 __func__, params->frequency);
 741
 742         /* Fix me: it could be air. */
 743         priv->rf_mode = params->mode;
 744         if (params->mode > XC_RF_MODE_CABLE)
 745                 priv->rf_mode = XC_RF_MODE_CABLE;
 746
 747         /* params->frequency is in units of 62.5khz */
 748         priv->freq_hz = params->frequency * 62500;
 749
 750         /* FIX ME: Some video standards may have several possible audio
 751                    standards. We simply default to one of them here.
 752          */
 753         if (params->std & V4L2_STD_MN) {
 754                 /* default to BTSC audio standard */
 755                 priv->video_standard = MN_NTSC_PAL_BTSC;
 756                 goto tune_channel;
 757         }
 758
 759         if (params->std & V4L2_STD_PAL_BG) {
 760                 /* default to NICAM audio standard */
 761                 priv->video_standard = BG_PAL_NICAM;
 762                 goto tune_channel;
 763         }
 764
 765         if (params->std & V4L2_STD_PAL_I) {
 766                 /* default to NICAM audio standard */
 767                 priv->video_standard = I_PAL_NICAM;
 768                 goto tune_channel;
 769         }
 770
 771         if (params->std & V4L2_STD_PAL_DK) {
 772                 /* default to NICAM audio standard */
 773                 priv->video_standard = DK_PAL_NICAM;
 774                 goto tune_channel;
 775         }
 776
 777         if (params->std & V4L2_STD_SECAM_DK) {
 778                 /* default to A2 DK1 audio standard */
 779                 priv->video_standard = DK_SECAM_A2DK1;
 780                 goto tune_channel;
 781         }
 782
 783         if (params->std & V4L2_STD_SECAM_L) {
 784                 priv->video_standard = L_SECAM_NICAM;
 785                 goto tune_channel;
 786         }
 787
 788         if (params->std & V4L2_STD_SECAM_LC) {
 789                 priv->video_standard = LC_SECAM_NICAM;
 790                 goto tune_channel;
 791         }
 792
 793 tune_channel:
 794         ret = xc_SetSignalSource(priv, priv->rf_mode);
 795         if (ret != XC_RESULT_SUCCESS) {
 796                 printk(KERN_ERR
 797                         "xc5000: xc_SetSignalSource(%d) failed\n",
 798                         priv->rf_mode);
 799                 return -EREMOTEIO;
 800         }
 801
 802         ret = xc_SetTVStandard(priv,
 803                 XC5000_Standard[priv->video_standard].VideoMode,
 804                 XC5000_Standard[priv->video_standard].AudioMode);
 805         if (ret != XC_RESULT_SUCCESS) {
 806                 printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
 807                 return -EREMOTEIO;
 808         }
 809
 810         xc_tune_channel(priv, priv->freq_hz);
 811
 812         if (debug)
 813                 xc_debug_dump(priv);
 814
 815         return 0;
 816 }
 817
 818 static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
 819 {
 820         struct xc5000_priv *priv = fe->tuner_priv;
 821         dprintk(1, "%s()\n", __func__);
 822         *freq = priv->freq_hz;
 823         return 0;
 824 }
 825
 826 static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
 827 {
 828         struct xc5000_priv *priv = fe->tuner_priv;
 829         dprintk(1, "%s()\n", __func__);
 830
 831         *bw = priv->bandwidth;
 832         return 0;
 833 }
 834
 835 static int xc5000_get_status(struct dvb_frontend *fe, u32 *status)
 836 {
 837         struct xc5000_priv *priv = fe->tuner_priv;
 838         u16 lock_status = 0;
 839
 840         xc_get_lock_status(priv, &lock_status);
 841
 842         dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
 843
 844         *status = lock_status;
 845
 846         return 0;
 847 }
 848
 849 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
 850 {
 851         struct xc5000_priv *priv = fe->tuner_priv;
 852         int ret = 0;
 853
 854         if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
 855                 ret = xc5000_fwupload(fe);
 856                 if (ret != XC_RESULT_SUCCESS)
 857                         return ret;
 858         }
 859
 860         /* Start the tuner self-calibration process */
 861         ret |= xc_initialize(priv);
 862
 863         /* Wait for calibration to complete.
 864          * We could continue but XC5000 will clock stretch subsequent
 865          * I2C transactions until calibration is complete.  This way we
 866          * don't have to rely on clock stretching working.
 867          */
 868         xc_wait(100);
 869
 870         /* Default to "CABLE" mode */
 871         ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE);
 872
 873         return ret;
 874 }
 875
 876 static int xc5000_sleep(struct dvb_frontend *fe)
 877 {
 878         struct xc5000_priv *priv = fe->tuner_priv;
 879         int ret;
 880
 881         dprintk(1, "%s()\n", __func__);
 882
 883         /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized
 884          * once shutdown without reloading the driver. Maybe I am not
 885          * doing something right.
 886          *
 887          */
 888
 889         ret = xc_shutdown(priv);
 890         if (ret != XC_RESULT_SUCCESS) {
 891                 printk(KERN_ERR
 892                         "xc5000: %s() unable to shutdown tuner\n",
 893                         __func__);
 894                 return -EREMOTEIO;
 895         } else
 896                 return XC_RESULT_SUCCESS;
 897 }
 898
 899 static int xc5000_init(struct dvb_frontend *fe)
 900 {
 901         struct xc5000_priv *priv = fe->tuner_priv;
 902         dprintk(1, "%s()\n", __func__);
 903
 904         if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) {
 905                 printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
 906                 return -EREMOTEIO;
 907         }
 908
 909         if (debug)
 910                 xc_debug_dump(priv);
 911
 912         return 0;
 913 }
 914
 915 static int xc5000_release(struct dvb_frontend *fe)
 916 {
 917         struct xc5000_priv *priv = fe->tuner_priv;
 918
 919         dprintk(1, "%s()\n", __func__);
 920
 921         mutex_lock(&xc5000_list_mutex);
 922
 923         if (priv)
 924                 hybrid_tuner_release_state(priv);
 925
 926         mutex_unlock(&xc5000_list_mutex);
 927
 928         fe->tuner_priv = NULL;
 929
 930         return 0;
 931 }
 932
 933 static const struct dvb_tuner_ops xc5000_tuner_ops = {
 934         .info = {
 935                 .name           = "Xceive XC5000",
 936                 .frequency_min  =    1000000,
 937                 .frequency_max  = 1023000000,
 938                 .frequency_step =      50000,
 939         },
 940
 941         .release           = xc5000_release,
 942         .init              = xc5000_init,
 943         .sleep             = xc5000_sleep,
 944
 945         .set_params        = xc5000_set_params,
 946         .set_analog_params = xc5000_set_analog_params,
 947         .get_frequency     = xc5000_get_frequency,
 948         .get_bandwidth     = xc5000_get_bandwidth,
 949         .get_status        = xc5000_get_status
 950 };
 951
 952 struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 953                                    struct i2c_adapter *i2c,
 954                                    struct xc5000_config *cfg)
 955 {
 956         struct xc5000_priv *priv = NULL;
 957         int instance;
 958         u16 id = 0;
 959
 960         dprintk(1, "%s(%d-%04x)\n", __func__,
 961                 i2c ? i2c_adapter_id(i2c) : -1,
 962                 cfg ? cfg->i2c_address : -1);
 963
 964         mutex_lock(&xc5000_list_mutex);
 965
 966         instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
 967                                               hybrid_tuner_instance_list,
 968                                               i2c, cfg->i2c_address, "xc5000");
 969         switch (instance) {
 970         case 0:
 971                 goto fail;
 972                 break;
 973         case 1:
 974                 /* new tuner instance */
 975                 priv->bandwidth = BANDWIDTH_6_MHZ;
 976                 priv->if_khz = cfg->if_khz;
 977
 978                 fe->tuner_priv = priv;
 979                 break;
 980         default:
 981                 /* existing tuner instance */
 982                 fe->tuner_priv = priv;
 983                 break;
 984         }
 985
 986         /* Check if firmware has been loaded. It is possible that another
 987            instance of the driver has loaded the firmware.
 988          */
 989         if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
 990                 goto fail;
 991
 992         switch (id) {
 993         case XC_PRODUCT_ID_FW_LOADED:
 994                 printk(KERN_INFO
 995                         "xc5000: Successfully identified at address 0x%02x\n",
 996                         cfg->i2c_address);
 997                 printk(KERN_INFO
 998                         "xc5000: Firmware has been loaded previously\n");
 999                 break;
1000         case XC_PRODUCT_ID_FW_NOT_LOADED:
1001                 printk(KERN_INFO
1002                         "xc5000: Successfully identified at address 0x%02x\n",
1003                         cfg->i2c_address);
1004                 printk(KERN_INFO
1005                         "xc5000: Firmware has not been loaded previously\n");
1006                 break;
1007         default:
1008                 printk(KERN_ERR
1009                         "xc5000: Device not found at addr 0x%02x (0x%x)\n",
1010                         cfg->i2c_address, id);
1011                 goto fail;
1012         }
1013
1014         mutex_unlock(&xc5000_list_mutex);
1015
1016         memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
1017                 sizeof(struct dvb_tuner_ops));
1018
1019         return fe;
1020 fail:
1021         mutex_unlock(&xc5000_list_mutex);
1022
1023         xc5000_release(fe);
1024         return NULL;
1025 }
1026 EXPORT_SYMBOL(xc5000_attach);
1027
1028 MODULE_AUTHOR("Steven Toth");
1029 MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver");
1030 MODULE_LICENSE("GPL");