Merge branch 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
[linux-2.6] / arch / arm / mach-pxa / colibri.c
1 /*
2  *  linux/arch/arm/mach-pxa/colibri.c
3  *
4  *  Support for Toradex PXA27x based Colibri module
5  *  Daniel Mack <daniel@caiaq.de>
6  *
7  *  This program is free software; you can redistribute it and/or modify
8  *  it under the terms of the GNU General Public License version 2 as
9  *  published by the Free Software Foundation.
10  */
11
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/platform_device.h>
15 #include <linux/sysdev.h>
16 #include <linux/interrupt.h>
17 #include <linux/bitops.h>
18 #include <linux/ioport.h>
19 #include <linux/delay.h>
20 #include <linux/mtd/mtd.h>
21 #include <linux/mtd/partitions.h>
22 #include <linux/mtd/physmap.h>
23 #include <asm/mach-types.h>
24 #include <mach/hardware.h>
25 #include <asm/irq.h>
26 #include <asm/sizes.h>
27 #include <asm/mach/arch.h>
28 #include <asm/mach/map.h>
29 #include <asm/mach/irq.h>
30 #include <asm/mach/flash.h>
31 #include <mach/pxa-regs.h>
32 #include <mach/mfp-pxa27x.h>
33 #include <mach/colibri.h>
34
35 #include "generic.h"
36 #include "devices.h"
37
38 static unsigned long colibri_pin_config[] __initdata = {
39         GPIO78_nCS_2,   /* Ethernet CS */
40         GPIO114_GPIO,   /* Ethernet IRQ */
41 };
42
43 /*
44  * Flash
45  */
46 static struct mtd_partition colibri_partitions[] = {
47         {
48                 .name =         "Bootloader",
49                 .offset =       0x00000000,
50                 .size =         0x00040000,
51                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
52         }, {
53                 .name =         "Kernel",
54                 .offset =       0x00040000,
55                 .size =         0x00400000,
56                 .mask_flags =   0
57         }, {
58                 .name =         "Rootfs",
59                 .offset =       0x00440000,
60                 .size =         MTDPART_SIZ_FULL,
61                 .mask_flags =   0
62         }
63 };
64
65 static struct physmap_flash_data colibri_flash_data[] = {
66         {
67                 .width          = 4,                    /* bankwidth in bytes */
68                 .parts          = colibri_partitions,
69                 .nr_parts       = ARRAY_SIZE(colibri_partitions)
70         }
71 };
72
73 static struct resource flash_resource = {
74         .start  = PXA_CS0_PHYS,
75         .end    = PXA_CS0_PHYS + SZ_32M - 1,
76         .flags  = IORESOURCE_MEM,
77 };
78
79 static struct platform_device flash_device = {
80         .name   = "physmap-flash",
81         .id     = 0,
82         .dev    = {
83                 .platform_data = colibri_flash_data,
84         },
85         .resource = &flash_resource,
86         .num_resources = 1,
87 };
88
89 /*
90  * DM9000 Ethernet
91  */
92 static struct resource dm9000_resources[] = {
93         [0] = {
94                 .start  = COLIBRI_ETH_PHYS,
95                 .end    = COLIBRI_ETH_PHYS + 3,
96                 .flags  = IORESOURCE_MEM,
97         },
98         [1] = {
99                 .start  = COLIBRI_ETH_PHYS + 4,
100                 .end    = COLIBRI_ETH_PHYS + 4 + 500,
101                 .flags  = IORESOURCE_MEM,
102         },
103         [2] = {
104                 .start  = COLIBRI_ETH_IRQ,
105                 .end    = COLIBRI_ETH_IRQ,
106                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
107         },
108 };
109
110 static struct platform_device dm9000_device = {
111         .name           = "dm9000",
112         .id             = -1,
113         .num_resources  = ARRAY_SIZE(dm9000_resources),
114         .resource       = dm9000_resources,
115 };
116
117 static struct platform_device *colibri_devices[] __initdata = {
118         &flash_device,
119         &dm9000_device,
120 };
121
122 static void __init colibri_init(void)
123 {
124         pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
125
126         platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
127 }
128
129 MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
130         .phys_io        = 0x40000000,
131         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
132         .boot_params    = COLIBRI_SDRAM_BASE + 0x100,
133         .init_machine   = colibri_init,
134         .map_io         = pxa_map_io,
135         .init_irq       = pxa27x_init_irq,
136         .timer          = &pxa_timer,
137 MACHINE_END