Merge branch 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux-2.6] / drivers / ssb / driver_chipcommon.c
1 /*
2  * Sonics Silicon Backplane
3  * Broadcom ChipCommon core driver
4  *
5  * Copyright 2005, Broadcom Corporation
6  * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
7  *
8  * Licensed under the GNU/GPL. See COPYING for details.
9  */
10
11 #include <linux/ssb/ssb.h>
12 #include <linux/ssb/ssb_regs.h>
13 #include <linux/pci.h>
14
15 #include "ssb_private.h"
16
17
18 /* Clock sources */
19 enum ssb_clksrc {
20         /* PCI clock */
21         SSB_CHIPCO_CLKSRC_PCI,
22         /* Crystal slow clock oscillator */
23         SSB_CHIPCO_CLKSRC_XTALOS,
24         /* Low power oscillator */
25         SSB_CHIPCO_CLKSRC_LOPWROS,
26 };
27
28
29 static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
30                                         u32 mask, u32 value)
31 {
32         value &= mask;
33         value |= chipco_read32(cc, offset) & ~mask;
34         chipco_write32(cc, offset, value);
35
36         return value;
37 }
38
39 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
40                               enum ssb_clkmode mode)
41 {
42         struct ssb_device *ccdev = cc->dev;
43         struct ssb_bus *bus;
44         u32 tmp;
45
46         if (!ccdev)
47                 return;
48         bus = ccdev->bus;
49         /* chipcommon cores prior to rev6 don't support dynamic clock control */
50         if (ccdev->id.revision < 6)
51                 return;
52         /* chipcommon cores rev10 are a whole new ball game */
53         if (ccdev->id.revision >= 10)
54                 return;
55         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
56                 return;
57
58         switch (mode) {
59         case SSB_CLKMODE_SLOW:
60                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
61                 tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW;
62                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
63                 break;
64         case SSB_CLKMODE_FAST:
65                 ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */
66                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
67                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
68                 tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL;
69                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
70                 break;
71         case SSB_CLKMODE_DYNAMIC:
72                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
73                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW;
74                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL;
75                 tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
76                 if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL)
77                         tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL;
78                 chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp);
79
80                 /* for dynamic control, we have to release our xtal_pu "force on" */
81                 if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL)
82                         ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
83                 break;
84         default:
85                 SSB_WARN_ON(1);
86         }
87 }
88
89 /* Get the Slow Clock Source */
90 static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
91 {
92         struct ssb_bus *bus = cc->dev->bus;
93         u32 uninitialized_var(tmp);
94
95         if (cc->dev->id.revision < 6) {
96                 if (bus->bustype == SSB_BUSTYPE_SSB ||
97                     bus->bustype == SSB_BUSTYPE_PCMCIA)
98                         return SSB_CHIPCO_CLKSRC_XTALOS;
99                 if (bus->bustype == SSB_BUSTYPE_PCI) {
100                         pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp);
101                         if (tmp & 0x10)
102                                 return SSB_CHIPCO_CLKSRC_PCI;
103                         return SSB_CHIPCO_CLKSRC_XTALOS;
104                 }
105         }
106         if (cc->dev->id.revision < 10) {
107                 tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
108                 tmp &= 0x7;
109                 if (tmp == 0)
110                         return SSB_CHIPCO_CLKSRC_LOPWROS;
111                 if (tmp == 1)
112                         return SSB_CHIPCO_CLKSRC_XTALOS;
113                 if (tmp == 2)
114                         return SSB_CHIPCO_CLKSRC_PCI;
115         }
116
117         return SSB_CHIPCO_CLKSRC_XTALOS;
118 }
119
120 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
121 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
122 {
123         int uninitialized_var(limit);
124         enum ssb_clksrc clocksrc;
125         int divisor = 1;
126         u32 tmp;
127
128         clocksrc = chipco_pctl_get_slowclksrc(cc);
129         if (cc->dev->id.revision < 6) {
130                 switch (clocksrc) {
131                 case SSB_CHIPCO_CLKSRC_PCI:
132                         divisor = 64;
133                         break;
134                 case SSB_CHIPCO_CLKSRC_XTALOS:
135                         divisor = 32;
136                         break;
137                 default:
138                         SSB_WARN_ON(1);
139                 }
140         } else if (cc->dev->id.revision < 10) {
141                 switch (clocksrc) {
142                 case SSB_CHIPCO_CLKSRC_LOPWROS:
143                         break;
144                 case SSB_CHIPCO_CLKSRC_XTALOS:
145                 case SSB_CHIPCO_CLKSRC_PCI:
146                         tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL);
147                         divisor = (tmp >> 16) + 1;
148                         divisor *= 4;
149                         break;
150                 }
151         } else {
152                 tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
153                 divisor = (tmp >> 16) + 1;
154                 divisor *= 4;
155         }
156
157         switch (clocksrc) {
158         case SSB_CHIPCO_CLKSRC_LOPWROS:
159                 if (get_max)
160                         limit = 43000;
161                 else
162                         limit = 25000;
163                 break;
164         case SSB_CHIPCO_CLKSRC_XTALOS:
165                 if (get_max)
166                         limit = 20200000;
167                 else
168                         limit = 19800000;
169                 break;
170         case SSB_CHIPCO_CLKSRC_PCI:
171                 if (get_max)
172                         limit = 34000000;
173                 else
174                         limit = 25000000;
175                 break;
176         }
177         limit /= divisor;
178
179         return limit;
180 }
181
182 static void chipco_powercontrol_init(struct ssb_chipcommon *cc)
183 {
184         struct ssb_bus *bus = cc->dev->bus;
185
186         if (bus->chip_id == 0x4321) {
187                 if (bus->chip_rev == 0)
188                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4);
189                 else if (bus->chip_rev == 1)
190                         chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4);
191         }
192
193         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
194                 return;
195
196         if (cc->dev->id.revision >= 10) {
197                 /* Set Idle Power clock rate to 1Mhz */
198                 chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL,
199                                (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) &
200                                 0x0000FFFF) | 0x00040000);
201         } else {
202                 int maxfreq;
203
204                 maxfreq = chipco_pctl_clockfreqlimit(cc, 1);
205                 chipco_write32(cc, SSB_CHIPCO_PLLONDELAY,
206                                (maxfreq * 150 + 999999) / 1000000);
207                 chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY,
208                                (maxfreq * 15 + 999999) / 1000000);
209         }
210 }
211
212 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
213 {
214         struct ssb_bus *bus = cc->dev->bus;
215         int minfreq;
216         unsigned int tmp;
217         u32 pll_on_delay;
218
219         if (bus->bustype != SSB_BUSTYPE_PCI)
220                 return;
221         if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
222                 return;
223
224         minfreq = chipco_pctl_clockfreqlimit(cc, 0);
225         pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
226         tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
227         SSB_WARN_ON(tmp & ~0xFFFF);
228
229         cc->fast_pwrup_delay = tmp;
230 }
231
232 void ssb_chipcommon_init(struct ssb_chipcommon *cc)
233 {
234         if (!cc->dev)
235                 return; /* We don't have a ChipCommon */
236         ssb_pmu_init(cc);
237         chipco_powercontrol_init(cc);
238         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
239         calc_fast_powerup_delay(cc);
240 }
241
242 void ssb_chipco_suspend(struct ssb_chipcommon *cc)
243 {
244         if (!cc->dev)
245                 return;
246         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
247 }
248
249 void ssb_chipco_resume(struct ssb_chipcommon *cc)
250 {
251         if (!cc->dev)
252                 return;
253         chipco_powercontrol_init(cc);
254         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
255 }
256
257 /* Get the processor clock */
258 void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
259                              u32 *plltype, u32 *n, u32 *m)
260 {
261         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
262         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
263         switch (*plltype) {
264         case SSB_PLLTYPE_2:
265         case SSB_PLLTYPE_4:
266         case SSB_PLLTYPE_6:
267         case SSB_PLLTYPE_7:
268                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
269                 break;
270         case SSB_PLLTYPE_3:
271                 /* 5350 uses m2 to control mips */
272                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
273                 break;
274         default:
275                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
276                 break;
277         }
278 }
279
280 /* Get the bus clock */
281 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
282                                  u32 *plltype, u32 *n, u32 *m)
283 {
284         *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
285         *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
286         switch (*plltype) {
287         case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
288                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
289                 break;
290         case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
291                 if (cc->dev->bus->chip_id != 0x5365) {
292                         *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
293                         break;
294                 }
295                 /* Fallthough */
296         default:
297                 *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
298         }
299 }
300
301 void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
302                             unsigned long ns)
303 {
304         struct ssb_device *dev = cc->dev;
305         struct ssb_bus *bus = dev->bus;
306         u32 tmp;
307
308         /* set register for external IO to control LED. */
309         chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
310         tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;            /* Waitcount-3 = 10ns */
311         tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;   /* Waitcount-1 = 40ns */
312         tmp |= DIV_ROUND_UP(240, ns);                           /* Waitcount-0 = 240ns */
313         chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp);       /* 0x01020a0c for a 100Mhz clock */
314
315         /* Set timing for the flash */
316         tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT;   /* Waitcount-3 = 10nS */
317         tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT;  /* Waitcount-1 = 10nS */
318         tmp |= DIV_ROUND_UP(120, ns);                           /* Waitcount-0 = 120nS */
319         if ((bus->chip_id == 0x5365) ||
320             (dev->id.revision < 9))
321                 chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
322         if ((bus->chip_id == 0x5365) ||
323             (dev->id.revision < 9) ||
324             ((bus->chip_id == 0x5350) && (bus->chip_rev == 0)))
325                 chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp);
326
327         if (bus->chip_id == 0x5350) {
328                 /* Enable EXTIF */
329                 tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;      /* Waitcount-3 = 10ns */
330                 tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
331                 tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
332                 tmp |= DIV_ROUND_UP(120, ns);                     /* Waitcount-0 = 120ns */
333                 chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
334         }
335 }
336
337 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
338 void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
339 {
340         /* instant NMI */
341         chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
342 }
343
344 void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
345 {
346         chipco_write32_masked(cc, SSB_CHIPCO_IRQMASK, mask, value);
347 }
348
349 u32 ssb_chipco_irq_status(struct ssb_chipcommon *cc, u32 mask)
350 {
351         return chipco_read32(cc, SSB_CHIPCO_IRQSTAT) & mask;
352 }
353
354 u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
355 {
356         return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
357 }
358
359 u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
360 {
361         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
362 }
363
364 u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
365 {
366         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
367 }
368
369 u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
370 {
371         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
372 }
373
374 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
375 {
376         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
377 }
378
379 u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
380 {
381         return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
382 }
383
384 #ifdef CONFIG_SSB_SERIAL
385 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
386                            struct ssb_serial_port *ports)
387 {
388         struct ssb_bus *bus = cc->dev->bus;
389         int nr_ports = 0;
390         u32 plltype;
391         unsigned int irq;
392         u32 baud_base, div;
393         u32 i, n;
394         unsigned int ccrev = cc->dev->id.revision;
395
396         plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
397         irq = ssb_mips_irq(cc->dev);
398
399         if (plltype == SSB_PLLTYPE_1) {
400                 /* PLL clock */
401                 baud_base = ssb_calc_clock_rate(plltype,
402                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_N),
403                                                 chipco_read32(cc, SSB_CHIPCO_CLOCK_M2));
404                 div = 1;
405         } else {
406                 if (ccrev == 20) {
407                         /* BCM5354 uses constant 25MHz clock */
408                         baud_base = 25000000;
409                         div = 48;
410                         /* Set the override bit so we don't divide it */
411                         chipco_write32(cc, SSB_CHIPCO_CORECTL,
412                                        chipco_read32(cc, SSB_CHIPCO_CORECTL)
413                                        | SSB_CHIPCO_CORECTL_UARTCLK0);
414                 } else if ((ccrev >= 11) && (ccrev != 15)) {
415                         /* Fixed ALP clock */
416                         baud_base = 20000000;
417                         if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
418                                 /* FIXME: baud_base is different for devices with a PMU */
419                                 SSB_WARN_ON(1);
420                         }
421                         div = 1;
422                         if (ccrev >= 21) {
423                                 /* Turn off UART clock before switching clocksource. */
424                                 chipco_write32(cc, SSB_CHIPCO_CORECTL,
425                                                chipco_read32(cc, SSB_CHIPCO_CORECTL)
426                                                & ~SSB_CHIPCO_CORECTL_UARTCLKEN);
427                         }
428                         /* Set the override bit so we don't divide it */
429                         chipco_write32(cc, SSB_CHIPCO_CORECTL,
430                                        chipco_read32(cc, SSB_CHIPCO_CORECTL)
431                                        | SSB_CHIPCO_CORECTL_UARTCLK0);
432                         if (ccrev >= 21) {
433                                 /* Re-enable the UART clock. */
434                                 chipco_write32(cc, SSB_CHIPCO_CORECTL,
435                                                chipco_read32(cc, SSB_CHIPCO_CORECTL)
436                                                | SSB_CHIPCO_CORECTL_UARTCLKEN);
437                         }
438                 } else if (ccrev >= 3) {
439                         /* Internal backplane clock */
440                         baud_base = ssb_clockspeed(bus);
441                         div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
442                               & SSB_CHIPCO_CLKDIV_UART;
443                 } else {
444                         /* Fixed internal backplane clock */
445                         baud_base = 88000000;
446                         div = 48;
447                 }
448
449                 /* Clock source depends on strapping if UartClkOverride is unset */
450                 if ((ccrev > 0) &&
451                     !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) {
452                         if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) ==
453                             SSB_CHIPCO_CAP_UARTCLK_INT) {
454                                 /* Internal divided backplane clock */
455                                 baud_base /= div;
456                         } else {
457                                 /* Assume external clock of 1.8432 MHz */
458                                 baud_base = 1843200;
459                         }
460                 }
461         }
462
463         /* Determine the registers of the UARTs */
464         n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART);
465         for (i = 0; i < n; i++) {
466                 void __iomem *cc_mmio;
467                 void __iomem *uart_regs;
468
469                 cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE);
470                 uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA;
471                 /* Offset changed at after rev 0 */
472                 if (ccrev == 0)
473                         uart_regs += (i * 8);
474                 else
475                         uart_regs += (i * 256);
476
477                 nr_ports++;
478                 ports[i].regs = uart_regs;
479                 ports[i].irq = irq;
480                 ports[i].baud_base = baud_base;
481                 ports[i].reg_shift = 0;
482         }
483
484         return nr_ports;
485 }
486 #endif /* CONFIG_SSB_SERIAL */