git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/acpica/hwgpe.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: hwgpe - Low level GPE enable/disable/clear functions
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2008, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include "accommon.h"
  47 #include "acevents.h"
  48
  49 #define _COMPONENT          ACPI_HARDWARE
  50 ACPI_MODULE_NAME("hwgpe")
  51
  52 /* Local prototypes */
  53 static acpi_status
  54 acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
  55                                 struct acpi_gpe_block_info *gpe_block,
  56                                 void *context);
  57
  58 /******************************************************************************
  59  *
  60  * FUNCTION:    acpi_hw_low_disable_gpe
  61  *
  62  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be disabled
  63  *
  64  * RETURN:      Status
  65  *
  66  * DESCRIPTION: Disable a single GPE in the enable register.
  67  *
  68  ******************************************************************************/
  69
  70 acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
  71 {
  72         struct acpi_gpe_register_info *gpe_register_info;
  73         acpi_status status;
  74         u32 enable_mask;
  75
  76         /* Get the info block for the entire GPE register */
  77
  78         gpe_register_info = gpe_event_info->register_info;
  79         if (!gpe_register_info) {
  80                 return (AE_NOT_EXIST);
  81         }
  82
  83         /* Get current value of the enable register that contains this GPE */
  84
  85         status = acpi_read(&enable_mask, &gpe_register_info->enable_address);
  86         if (ACPI_FAILURE(status)) {
  87                 return (status);
  88         }
  89
  90         /* Clear just the bit that corresponds to this GPE */
  91
  92         ACPI_CLEAR_BIT(enable_mask, ((u32)1 <<
  93                                      (gpe_event_info->gpe_number -
  94                                       gpe_register_info->base_gpe_number)));
  95
  96         /* Write the updated enable mask */
  97
  98         status = acpi_write(enable_mask, &gpe_register_info->enable_address);
  99         return (status);
 100 }
 101
 102 /******************************************************************************
 103  *
 104  * FUNCTION:    acpi_hw_write_gpe_enable_reg
 105  *
 106  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be enabled
 107  *
 108  * RETURN:      Status
 109  *
 110  * DESCRIPTION: Write a GPE enable register.  Note: The bit for this GPE must
 111  *              already be cleared or set in the parent register
 112  *              enable_for_run mask.
 113  *
 114  ******************************************************************************/
 115
 116 acpi_status
 117 acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
 118 {
 119         struct acpi_gpe_register_info *gpe_register_info;
 120         acpi_status status;
 121
 122         ACPI_FUNCTION_ENTRY();
 123
 124         /* Get the info block for the entire GPE register */
 125
 126         gpe_register_info = gpe_event_info->register_info;
 127         if (!gpe_register_info) {
 128                 return (AE_NOT_EXIST);
 129         }
 130
 131         /* Write the entire GPE (runtime) enable register */
 132
 133         status = acpi_write(gpe_register_info->enable_for_run,
 134                             &gpe_register_info->enable_address);
 135
 136         return (status);
 137 }
 138
 139 /******************************************************************************
 140  *
 141  * FUNCTION:    acpi_hw_clear_gpe
 142  *
 143  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be cleared
 144  *
 145  * RETURN:      Status
 146  *
 147  * DESCRIPTION: Clear the status bit for a single GPE.
 148  *
 149  ******************************************************************************/
 150
 151 acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 152 {
 153         acpi_status status;
 154         u8 register_bit;
 155
 156         ACPI_FUNCTION_ENTRY();
 157
 158         register_bit = (u8)(1 <<
 159                             (gpe_event_info->gpe_number -
 160                              gpe_event_info->register_info->base_gpe_number));
 161
 162         /*
 163          * Write a one to the appropriate bit in the status register to
 164          * clear this GPE.
 165          */
 166         status = acpi_write(register_bit,
 167                             &gpe_event_info->register_info->status_address);
 168
 169         return (status);
 170 }
 171
 172 /******************************************************************************
 173  *
 174  * FUNCTION:    acpi_hw_get_gpe_status
 175  *
 176  * PARAMETERS:  gpe_event_info      - Info block for the GPE to queried
 177  *              event_status        - Where the GPE status is returned
 178  *
 179  * RETURN:      Status
 180  *
 181  * DESCRIPTION: Return the status of a single GPE.
 182  *
 183  ******************************************************************************/
 184
 185 acpi_status
 186 acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 187                        acpi_event_status * event_status)
 188 {
 189         u32 in_byte;
 190         u8 register_bit;
 191         struct acpi_gpe_register_info *gpe_register_info;
 192         acpi_status status;
 193         acpi_event_status local_event_status = 0;
 194
 195         ACPI_FUNCTION_ENTRY();
 196
 197         if (!event_status) {
 198                 return (AE_BAD_PARAMETER);
 199         }
 200
 201         /* Get the info block for the entire GPE register */
 202
 203         gpe_register_info = gpe_event_info->register_info;
 204
 205         /* Get the register bitmask for this GPE */
 206
 207         register_bit = (u8)(1 <<
 208                             (gpe_event_info->gpe_number -
 209                              gpe_event_info->register_info->base_gpe_number));
 210
 211         /* GPE currently enabled? (enabled for runtime?) */
 212
 213         if (register_bit & gpe_register_info->enable_for_run) {
 214                 local_event_status |= ACPI_EVENT_FLAG_ENABLED;
 215         }
 216
 217         /* GPE enabled for wake? */
 218
 219         if (register_bit & gpe_register_info->enable_for_wake) {
 220                 local_event_status |= ACPI_EVENT_FLAG_WAKE_ENABLED;
 221         }
 222
 223         /* GPE currently active (status bit == 1)? */
 224
 225         status = acpi_read(&in_byte, &gpe_register_info->status_address);
 226         if (ACPI_FAILURE(status)) {
 227                 goto unlock_and_exit;
 228         }
 229
 230         if (register_bit & in_byte) {
 231                 local_event_status |= ACPI_EVENT_FLAG_SET;
 232         }
 233
 234         /* Set return value */
 235
 236         (*event_status) = local_event_status;
 237
 238       unlock_and_exit:
 239         return (status);
 240 }
 241
 242 /******************************************************************************
 243  *
 244  * FUNCTION:    acpi_hw_disable_gpe_block
 245  *
 246  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 247  *              gpe_block           - Gpe Block info
 248  *
 249  * RETURN:      Status
 250  *
 251  * DESCRIPTION: Disable all GPEs within a single GPE block
 252  *
 253  ******************************************************************************/
 254
 255 acpi_status
 256 acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 257                           struct acpi_gpe_block_info *gpe_block, void *context)
 258 {
 259         u32 i;
 260         acpi_status status;
 261
 262         /* Examine each GPE Register within the block */
 263
 264         for (i = 0; i < gpe_block->register_count; i++) {
 265
 266                 /* Disable all GPEs in this register */
 267
 268                 status =
 269                     acpi_write(0x00,
 270                                &gpe_block->register_info[i].enable_address);
 271                 if (ACPI_FAILURE(status)) {
 272                         return (status);
 273                 }
 274         }
 275
 276         return (AE_OK);
 277 }
 278
 279 /******************************************************************************
 280  *
 281  * FUNCTION:    acpi_hw_clear_gpe_block
 282  *
 283  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 284  *              gpe_block           - Gpe Block info
 285  *
 286  * RETURN:      Status
 287  *
 288  * DESCRIPTION: Clear status bits for all GPEs within a single GPE block
 289  *
 290  ******************************************************************************/
 291
 292 acpi_status
 293 acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 294                         struct acpi_gpe_block_info *gpe_block, void *context)
 295 {
 296         u32 i;
 297         acpi_status status;
 298
 299         /* Examine each GPE Register within the block */
 300
 301         for (i = 0; i < gpe_block->register_count; i++) {
 302
 303                 /* Clear status on all GPEs in this register */
 304
 305                 status =
 306                     acpi_write(0xFF,
 307                                &gpe_block->register_info[i].status_address);
 308                 if (ACPI_FAILURE(status)) {
 309                         return (status);
 310                 }
 311         }
 312
 313         return (AE_OK);
 314 }
 315
 316 /******************************************************************************
 317  *
 318  * FUNCTION:    acpi_hw_enable_runtime_gpe_block
 319  *
 320  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 321  *              gpe_block           - Gpe Block info
 322  *
 323  * RETURN:      Status
 324  *
 325  * DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
 326  *              combination wake/run GPEs.
 327  *
 328  ******************************************************************************/
 329
 330 acpi_status
 331 acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 332                                  struct acpi_gpe_block_info *gpe_block, void *context)
 333 {
 334         u32 i;
 335         acpi_status status;
 336
 337         /* NOTE: assumes that all GPEs are currently disabled */
 338
 339         /* Examine each GPE Register within the block */
 340
 341         for (i = 0; i < gpe_block->register_count; i++) {
 342                 if (!gpe_block->register_info[i].enable_for_run) {
 343                         continue;
 344                 }
 345
 346                 /* Enable all "runtime" GPEs in this register */
 347
 348                 status = acpi_write(gpe_block->register_info[i].enable_for_run,
 349                                     &gpe_block->register_info[i].
 350                                     enable_address);
 351                 if (ACPI_FAILURE(status)) {
 352                         return (status);
 353                 }
 354         }
 355
 356         return (AE_OK);
 357 }
 358
 359 /******************************************************************************
 360  *
 361  * FUNCTION:    acpi_hw_enable_wakeup_gpe_block
 362  *
 363  * PARAMETERS:  gpe_xrupt_info      - GPE Interrupt info
 364  *              gpe_block           - Gpe Block info
 365  *
 366  * RETURN:      Status
 367  *
 368  * DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
 369  *              combination wake/run GPEs.
 370  *
 371  ******************************************************************************/
 372
 373 static acpi_status
 374 acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 375                                 struct acpi_gpe_block_info *gpe_block,
 376                                 void *context)
 377 {
 378         u32 i;
 379         acpi_status status;
 380
 381         /* Examine each GPE Register within the block */
 382
 383         for (i = 0; i < gpe_block->register_count; i++) {
 384                 if (!gpe_block->register_info[i].enable_for_wake) {
 385                         continue;
 386                 }
 387
 388                 /* Enable all "wake" GPEs in this register */
 389
 390                 status = acpi_write(gpe_block->register_info[i].enable_for_wake,
 391                                     &gpe_block->register_info[i].
 392                                     enable_address);
 393                 if (ACPI_FAILURE(status)) {
 394                         return (status);
 395                 }
 396         }
 397
 398         return (AE_OK);
 399 }
 400
 401 /******************************************************************************
 402  *
 403  * FUNCTION:    acpi_hw_disable_all_gpes
 404  *
 405  * PARAMETERS:  None
 406  *
 407  * RETURN:      Status
 408  *
 409  * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
 410  *
 411  ******************************************************************************/
 412
 413 acpi_status acpi_hw_disable_all_gpes(void)
 414 {
 415         acpi_status status;
 416
 417         ACPI_FUNCTION_TRACE(hw_disable_all_gpes);
 418
 419         status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block, NULL);
 420         status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
 421         return_ACPI_STATUS(status);
 422 }
 423
 424 /******************************************************************************
 425  *
 426  * FUNCTION:    acpi_hw_enable_all_runtime_gpes
 427  *
 428  * PARAMETERS:  None
 429  *
 430  * RETURN:      Status
 431  *
 432  * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
 433  *
 434  ******************************************************************************/
 435
 436 acpi_status acpi_hw_enable_all_runtime_gpes(void)
 437 {
 438         acpi_status status;
 439
 440         ACPI_FUNCTION_TRACE(hw_enable_all_runtime_gpes);
 441
 442         status = acpi_ev_walk_gpe_list(acpi_hw_enable_runtime_gpe_block, NULL);
 443         return_ACPI_STATUS(status);
 444 }
 445
 446 /******************************************************************************
 447  *
 448  * FUNCTION:    acpi_hw_enable_all_wakeup_gpes
 449  *
 450  * PARAMETERS:  None
 451  *
 452  * RETURN:      Status
 453  *
 454  * DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
 455  *
 456  ******************************************************************************/
 457
 458 acpi_status acpi_hw_enable_all_wakeup_gpes(void)
 459 {
 460         acpi_status status;
 461
 462         ACPI_FUNCTION_TRACE(hw_enable_all_wakeup_gpes);
 463
 464         status = acpi_ev_walk_gpe_list(acpi_hw_enable_wakeup_gpe_block, NULL);
 465         return_ACPI_STATUS(status);
 466 }