git.oblomov.eu Git - linux-2.6/blob - drivers/serial/sunzilog.c

   1 /*
   2  * sunzilog.c
   3  *
   4  * Driver for Zilog serial chips found on Sun workstations and
   5  * servers.  This driver could actually be made more generic.
   6  *
   7  * This is based on the old drivers/sbus/char/zs.c code.  A lot
   8  * of code has been simply moved over directly from there but
   9  * much has been rewritten.  Credits therefore go out to Eddie
  10  * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
  11  * work there.
  12  *
  13  *  Copyright (C) 2002 David S. Miller (davem@redhat.com)
  14  */
  15
  16 #include <linux/config.h>
  17 #include <linux/module.h>
  18 #include <linux/kernel.h>
  19 #include <linux/sched.h>
  20 #include <linux/errno.h>
  21 #include <linux/delay.h>
  22 #include <linux/tty.h>
  23 #include <linux/tty_flip.h>
  24 #include <linux/major.h>
  25 #include <linux/string.h>
  26 #include <linux/ptrace.h>
  27 #include <linux/ioport.h>
  28 #include <linux/slab.h>
  29 #include <linux/circ_buf.h>
  30 #include <linux/serial.h>
  31 #include <linux/sysrq.h>
  32 #include <linux/console.h>
  33 #include <linux/spinlock.h>
  34 #ifdef CONFIG_SERIO
  35 #include <linux/serio.h>
  36 #endif
  37 #include <linux/init.h>
  38
  39 #include <asm/io.h>
  40 #include <asm/irq.h>
  41 #ifdef CONFIG_SPARC64
  42 #include <asm/fhc.h>
  43 #endif
  44 #include <asm/sbus.h>
  45
  46 #if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
  47 #define SUPPORT_SYSRQ
  48 #endif
  49
  50 #include <linux/serial_core.h>
  51
  52 #include "suncore.h"
  53 #include "sunzilog.h"
  54
  55 /* On 32-bit sparcs we need to delay after register accesses
  56  * to accommodate sun4 systems, but we do not need to flush writes.
  57  * On 64-bit sparc we only need to flush single writes to ensure
  58  * completion.
  59  */
  60 #ifndef CONFIG_SPARC64
  61 #define ZSDELAY()               udelay(5)
  62 #define ZSDELAY_LONG()          udelay(20)
  63 #define ZS_WSYNC(channel)       do { } while (0)
  64 #else
  65 #define ZSDELAY()
  66 #define ZSDELAY_LONG()
  67 #define ZS_WSYNC(__channel) \
  68         sbus_readb(&((__channel)->control))
  69 #endif
  70
  71 static int num_sunzilog;
  72 #define NUM_SUNZILOG    num_sunzilog
  73 #define NUM_CHANNELS    (NUM_SUNZILOG * 2)
  74
  75 #define KEYBOARD_LINE 0x2
  76 #define MOUSE_LINE    0x3
  77
  78 #define ZS_CLOCK                4915200 /* Zilog input clock rate. */
  79 #define ZS_CLOCK_DIVISOR        16      /* Divisor this driver uses. */
  80
  81 /*
  82  * We wrap our port structure around the generic uart_port.
  83  */
  84 struct uart_sunzilog_port {
  85         struct uart_port                port;
  86
  87         /* IRQ servicing chain.  */
  88         struct uart_sunzilog_port       *next;
  89
  90         /* Current values of Zilog write registers.  */
  91         unsigned char                   curregs[NUM_ZSREGS];
  92
  93         unsigned int                    flags;
  94 #define SUNZILOG_FLAG_CONS_KEYB         0x00000001
  95 #define SUNZILOG_FLAG_CONS_MOUSE        0x00000002
  96 #define SUNZILOG_FLAG_IS_CONS           0x00000004
  97 #define SUNZILOG_FLAG_IS_KGDB           0x00000008
  98 #define SUNZILOG_FLAG_MODEM_STATUS      0x00000010
  99 #define SUNZILOG_FLAG_IS_CHANNEL_A      0x00000020
 100 #define SUNZILOG_FLAG_REGS_HELD         0x00000040
 101 #define SUNZILOG_FLAG_TX_STOPPED        0x00000080
 102 #define SUNZILOG_FLAG_TX_ACTIVE         0x00000100
 103
 104         unsigned int cflag;
 105
 106         unsigned char                   parity_mask;
 107         unsigned char                   prev_status;
 108
 109 #ifdef CONFIG_SERIO
 110         struct serio                    *serio;
 111         int                             serio_open;
 112 #endif
 113 };
 114
 115 #define ZILOG_CHANNEL_FROM_PORT(PORT)   ((struct zilog_channel __iomem *)((PORT)->membase))
 116 #define UART_ZILOG(PORT)                ((struct uart_sunzilog_port *)(PORT))
 117
 118 #define ZS_IS_KEYB(UP)  ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
 119 #define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
 120 #define ZS_IS_CONS(UP)  ((UP)->flags & SUNZILOG_FLAG_IS_CONS)
 121 #define ZS_IS_KGDB(UP)  ((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
 122 #define ZS_WANTS_MODEM_STATUS(UP)       ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
 123 #define ZS_IS_CHANNEL_A(UP)     ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
 124 #define ZS_REGS_HELD(UP)        ((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
 125 #define ZS_TX_STOPPED(UP)       ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
 126 #define ZS_TX_ACTIVE(UP)        ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
 127
 128 /* Reading and writing Zilog8530 registers.  The delays are to make this
 129  * driver work on the Sun4 which needs a settling delay after each chip
 130  * register access, other machines handle this in hardware via auxiliary
 131  * flip-flops which implement the settle time we do in software.
 132  *
 133  * The port lock must be held and local IRQs must be disabled
 134  * when {read,write}_zsreg is invoked.
 135  */
 136 static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
 137                                 unsigned char reg)
 138 {
 139         unsigned char retval;
 140
 141         sbus_writeb(reg, &channel->control);
 142         ZSDELAY();
 143         retval = sbus_readb(&channel->control);
 144         ZSDELAY();
 145
 146         return retval;
 147 }
 148
 149 static void write_zsreg(struct zilog_channel __iomem *channel,
 150                         unsigned char reg, unsigned char value)
 151 {
 152         sbus_writeb(reg, &channel->control);
 153         ZSDELAY();
 154         sbus_writeb(value, &channel->control);
 155         ZSDELAY();
 156 }
 157
 158 static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
 159 {
 160         int i;
 161
 162         for (i = 0; i < 32; i++) {
 163                 unsigned char regval;
 164
 165                 regval = sbus_readb(&channel->control);
 166                 ZSDELAY();
 167                 if (regval & Rx_CH_AV)
 168                         break;
 169
 170                 regval = read_zsreg(channel, R1);
 171                 sbus_readb(&channel->data);
 172                 ZSDELAY();
 173
 174                 if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
 175                         sbus_writeb(ERR_RES, &channel->control);
 176                         ZSDELAY();
 177                         ZS_WSYNC(channel);
 178                 }
 179         }
 180 }
 181
 182 /* This function must only be called when the TX is not busy.  The UART
 183  * port lock must be held and local interrupts disabled.
 184  */
 185 static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
 186 {
 187         int i;
 188
 189         /* Let pending transmits finish.  */
 190         for (i = 0; i < 1000; i++) {
 191                 unsigned char stat = read_zsreg(channel, R1);
 192                 if (stat & ALL_SNT)
 193                         break;
 194                 udelay(100);
 195         }
 196
 197         sbus_writeb(ERR_RES, &channel->control);
 198         ZSDELAY();
 199         ZS_WSYNC(channel);
 200
 201         sunzilog_clear_fifo(channel);
 202
 203         /* Disable all interrupts.  */
 204         write_zsreg(channel, R1,
 205                     regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
 206
 207         /* Set parity, sync config, stop bits, and clock divisor.  */
 208         write_zsreg(channel, R4, regs[R4]);
 209
 210         /* Set misc. TX/RX control bits.  */
 211         write_zsreg(channel, R10, regs[R10]);
 212
 213         /* Set TX/RX controls sans the enable bits.  */
 214         write_zsreg(channel, R3, regs[R3] & ~RxENAB);
 215         write_zsreg(channel, R5, regs[R5] & ~TxENAB);
 216
 217         /* Synchronous mode config.  */
 218         write_zsreg(channel, R6, regs[R6]);
 219         write_zsreg(channel, R7, regs[R7]);
 220
 221         /* Don't mess with the interrupt vector (R2, unused by us) and
 222          * master interrupt control (R9).  We make sure this is setup
 223          * properly at probe time then never touch it again.
 224          */
 225
 226         /* Disable baud generator.  */
 227         write_zsreg(channel, R14, regs[R14] & ~BRENAB);
 228
 229         /* Clock mode control.  */
 230         write_zsreg(channel, R11, regs[R11]);
 231
 232         /* Lower and upper byte of baud rate generator divisor.  */
 233         write_zsreg(channel, R12, regs[R12]);
 234         write_zsreg(channel, R13, regs[R13]);
 235
 236         /* Now rewrite R14, with BRENAB (if set).  */
 237         write_zsreg(channel, R14, regs[R14]);
 238
 239         /* External status interrupt control.  */
 240         write_zsreg(channel, R15, regs[R15]);
 241
 242         /* Reset external status interrupts.  */
 243         write_zsreg(channel, R0, RES_EXT_INT);
 244         write_zsreg(channel, R0, RES_EXT_INT);
 245
 246         /* Rewrite R3/R5, this time without enables masked.  */
 247         write_zsreg(channel, R3, regs[R3]);
 248         write_zsreg(channel, R5, regs[R5]);
 249
 250         /* Rewrite R1, this time without IRQ enabled masked.  */
 251         write_zsreg(channel, R1, regs[R1]);
 252 }
 253
 254 /* Reprogram the Zilog channel HW registers with the copies found in the
 255  * software state struct.  If the transmitter is busy, we defer this update
 256  * until the next TX complete interrupt.  Else, we do it right now.
 257  *
 258  * The UART port lock must be held and local interrupts disabled.
 259  */
 260 static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
 261                                        struct zilog_channel __iomem *channel)
 262 {
 263         if (!ZS_REGS_HELD(up)) {
 264                 if (ZS_TX_ACTIVE(up)) {
 265                         up->flags |= SUNZILOG_FLAG_REGS_HELD;
 266                 } else {
 267                         __load_zsregs(channel, up->curregs);
 268                 }
 269         }
 270 }
 271
 272 static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
 273 {
 274         unsigned int cur_cflag = up->cflag;
 275         int brg, new_baud;
 276
 277         up->cflag &= ~CBAUD;
 278         up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
 279
 280         brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
 281         up->curregs[R12] = (brg & 0xff);
 282         up->curregs[R13] = (brg >> 8) & 0xff;
 283         sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
 284 }
 285
 286 static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
 287                                          unsigned char ch, int is_break,
 288                                          struct pt_regs *regs)
 289 {
 290         if (ZS_IS_KEYB(up)) {
 291                 /* Stop-A is handled by drivers/char/keyboard.c now. */
 292 #ifdef CONFIG_SERIO
 293                 if (up->serio_open)
 294                         serio_interrupt(up->serio, ch, 0, regs);
 295 #endif
 296         } else if (ZS_IS_MOUSE(up)) {
 297                 int ret = suncore_mouse_baud_detection(ch, is_break);
 298
 299                 switch (ret) {
 300                 case 2:
 301                         sunzilog_change_mouse_baud(up);
 302                         /* fallthru */
 303                 case 1:
 304                         break;
 305
 306                 case 0:
 307 #ifdef CONFIG_SERIO
 308                         if (up->serio_open)
 309                                 serio_interrupt(up->serio, ch, 0, regs);
 310 #endif
 311                         break;
 312                 };
 313         }
 314 }
 315
 316 static struct tty_struct *
 317 sunzilog_receive_chars(struct uart_sunzilog_port *up,
 318                        struct zilog_channel __iomem *channel,
 319                        struct pt_regs *regs)
 320 {
 321         struct tty_struct *tty;
 322         unsigned char ch, r1;
 323
 324         tty = NULL;
 325         if (up->port.info != NULL &&            /* Unopened serial console */
 326             up->port.info->tty != NULL)         /* Keyboard || mouse */
 327                 tty = up->port.info->tty;
 328
 329         for (;;) {
 330
 331                 r1 = read_zsreg(channel, R1);
 332                 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
 333                         sbus_writeb(ERR_RES, &channel->control);
 334                         ZSDELAY();
 335                         ZS_WSYNC(channel);
 336                 }
 337
 338                 ch = sbus_readb(&channel->control);
 339                 ZSDELAY();
 340
 341                 /* This funny hack depends upon BRK_ABRT not interfering
 342                  * with the other bits we care about in R1.
 343                  */
 344                 if (ch & BRK_ABRT)
 345                         r1 |= BRK_ABRT;
 346
 347                 if (!(ch & Rx_CH_AV))
 348                         break;
 349
 350                 ch = sbus_readb(&channel->data);
 351                 ZSDELAY();
 352
 353                 ch &= up->parity_mask;
 354
 355                 if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
 356                         sunzilog_kbdms_receive_chars(up, ch, 0, regs);
 357                         continue;
 358                 }
 359
 360                 if (tty == NULL) {
 361                         uart_handle_sysrq_char(&up->port, ch, regs);
 362                         continue;
 363                 }
 364
 365                 if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
 366                         tty->flip.work.func((void *)tty);
 367                         /*
 368                          * The 8250 bails out of the loop here,
 369                          * but we need to read everything, or die.
 370                          */
 371                         if (tty->flip.count >= TTY_FLIPBUF_SIZE)
 372                                 continue;
 373                 }
 374
 375                 /* A real serial line, record the character and status.  */
 376                 *tty->flip.char_buf_ptr = ch;
 377                 *tty->flip.flag_buf_ptr = TTY_NORMAL;
 378                 up->port.icount.rx++;
 379                 if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
 380                         if (r1 & BRK_ABRT) {
 381                                 r1 &= ~(PAR_ERR | CRC_ERR);
 382                                 up->port.icount.brk++;
 383                                 if (uart_handle_break(&up->port))
 384                                         continue;
 385                         }
 386                         else if (r1 & PAR_ERR)
 387                                 up->port.icount.parity++;
 388                         else if (r1 & CRC_ERR)
 389                                 up->port.icount.frame++;
 390                         if (r1 & Rx_OVR)
 391                                 up->port.icount.overrun++;
 392                         r1 &= up->port.read_status_mask;
 393                         if (r1 & BRK_ABRT)
 394                                 *tty->flip.flag_buf_ptr = TTY_BREAK;
 395                         else if (r1 & PAR_ERR)
 396                                 *tty->flip.flag_buf_ptr = TTY_PARITY;
 397                         else if (r1 & CRC_ERR)
 398                                 *tty->flip.flag_buf_ptr = TTY_FRAME;
 399                 }
 400                 if (uart_handle_sysrq_char(&up->port, ch, regs))
 401                         continue;
 402
 403                 if (up->port.ignore_status_mask == 0xff ||
 404                     (r1 & up->port.ignore_status_mask) == 0) {
 405                         tty->flip.flag_buf_ptr++;
 406                         tty->flip.char_buf_ptr++;
 407                         tty->flip.count++;
 408                 }
 409                 if ((r1 & Rx_OVR) &&
 410                     tty->flip.count < TTY_FLIPBUF_SIZE) {
 411                         *tty->flip.flag_buf_ptr = TTY_OVERRUN;
 412                         tty->flip.flag_buf_ptr++;
 413                         tty->flip.char_buf_ptr++;
 414                         tty->flip.count++;
 415                 }
 416         }
 417
 418         return tty;
 419 }
 420
 421 static void sunzilog_status_handle(struct uart_sunzilog_port *up,
 422                                    struct zilog_channel __iomem *channel,
 423                                    struct pt_regs *regs)
 424 {
 425         unsigned char status;
 426
 427         status = sbus_readb(&channel->control);
 428         ZSDELAY();
 429
 430         sbus_writeb(RES_EXT_INT, &channel->control);
 431         ZSDELAY();
 432         ZS_WSYNC(channel);
 433
 434         if (status & BRK_ABRT) {
 435                 if (ZS_IS_MOUSE(up))
 436                         sunzilog_kbdms_receive_chars(up, 0, 1, regs);
 437                 if (ZS_IS_CONS(up)) {
 438                         /* Wait for BREAK to deassert to avoid potentially
 439                          * confusing the PROM.
 440                          */
 441                         while (1) {
 442                                 status = sbus_readb(&channel->control);
 443                                 ZSDELAY();
 444                                 if (!(status & BRK_ABRT))
 445                                         break;
 446                         }
 447                         sun_do_break();
 448                         return;
 449                 }
 450         }
 451
 452         if (ZS_WANTS_MODEM_STATUS(up)) {
 453                 if (status & SYNC)
 454                         up->port.icount.dsr++;
 455
 456                 /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
 457                  * But it does not tell us which bit has changed, we have to keep
 458                  * track of this ourselves.
 459                  */
 460                 if ((status ^ up->prev_status) ^ DCD)
 461                         uart_handle_dcd_change(&up->port,
 462                                                (status & DCD));
 463                 if ((status ^ up->prev_status) ^ CTS)
 464                         uart_handle_cts_change(&up->port,
 465                                                (status & CTS));
 466
 467                 wake_up_interruptible(&up->port.info->delta_msr_wait);
 468         }
 469
 470         up->prev_status = status;
 471 }
 472
 473 static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
 474                                     struct zilog_channel __iomem *channel)
 475 {
 476         struct circ_buf *xmit;
 477
 478         if (ZS_IS_CONS(up)) {
 479                 unsigned char status = sbus_readb(&channel->control);
 480                 ZSDELAY();
 481
 482                 /* TX still busy?  Just wait for the next TX done interrupt.
 483                  *
 484                  * It can occur because of how we do serial console writes.  It would
 485                  * be nice to transmit console writes just like we normally would for
 486                  * a TTY line. (ie. buffered and TX interrupt driven).  That is not
 487                  * easy because console writes cannot sleep.  One solution might be
 488                  * to poll on enough port->xmit space becomming free.  -DaveM
 489                  */
 490                 if (!(status & Tx_BUF_EMP))
 491                         return;
 492         }
 493
 494         up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
 495
 496         if (ZS_REGS_HELD(up)) {
 497                 __load_zsregs(channel, up->curregs);
 498                 up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
 499         }
 500
 501         if (ZS_TX_STOPPED(up)) {
 502                 up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
 503                 goto ack_tx_int;
 504         }
 505
 506         if (up->port.x_char) {
 507                 up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
 508                 sbus_writeb(up->port.x_char, &channel->data);
 509                 ZSDELAY();
 510                 ZS_WSYNC(channel);
 511
 512                 up->port.icount.tx++;
 513                 up->port.x_char = 0;
 514                 return;
 515         }
 516
 517         if (up->port.info == NULL)
 518                 goto ack_tx_int;
 519         xmit = &up->port.info->xmit;
 520         if (uart_circ_empty(xmit)) {
 521                 uart_write_wakeup(&up->port);
 522                 goto ack_tx_int;
 523         }
 524         if (uart_tx_stopped(&up->port))
 525                 goto ack_tx_int;
 526
 527         up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
 528         sbus_writeb(xmit->buf[xmit->tail], &channel->data);
 529         ZSDELAY();
 530         ZS_WSYNC(channel);
 531
 532         xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 533         up->port.icount.tx++;
 534
 535         if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 536                 uart_write_wakeup(&up->port);
 537
 538         return;
 539
 540 ack_tx_int:
 541         sbus_writeb(RES_Tx_P, &channel->control);
 542         ZSDELAY();
 543         ZS_WSYNC(channel);
 544 }
 545
 546 static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 547 {
 548         struct uart_sunzilog_port *up = dev_id;
 549
 550         while (up) {
 551                 struct zilog_channel __iomem *channel
 552                         = ZILOG_CHANNEL_FROM_PORT(&up->port);
 553                 struct tty_struct *tty;
 554                 unsigned char r3;
 555
 556                 spin_lock(&up->port.lock);
 557                 r3 = read_zsreg(channel, R3);
 558
 559                 /* Channel A */
 560                 tty = NULL;
 561                 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
 562                         sbus_writeb(RES_H_IUS, &channel->control);
 563                         ZSDELAY();
 564                         ZS_WSYNC(channel);
 565
 566                         if (r3 & CHARxIP)
 567                                 tty = sunzilog_receive_chars(up, channel, regs);
 568                         if (r3 & CHAEXT)
 569                                 sunzilog_status_handle(up, channel, regs);
 570                         if (r3 & CHATxIP)
 571                                 sunzilog_transmit_chars(up, channel);
 572                 }
 573                 spin_unlock(&up->port.lock);
 574
 575                 if (tty)
 576                         tty_flip_buffer_push(tty);
 577
 578                 /* Channel B */
 579                 up = up->next;
 580                 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 581
 582                 spin_lock(&up->port.lock);
 583                 tty = NULL;
 584                 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
 585                         sbus_writeb(RES_H_IUS, &channel->control);
 586                         ZSDELAY();
 587                         ZS_WSYNC(channel);
 588
 589                         if (r3 & CHBRxIP)
 590                                 tty = sunzilog_receive_chars(up, channel, regs);
 591                         if (r3 & CHBEXT)
 592                                 sunzilog_status_handle(up, channel, regs);
 593                         if (r3 & CHBTxIP)
 594                                 sunzilog_transmit_chars(up, channel);
 595                 }
 596                 spin_unlock(&up->port.lock);
 597
 598                 if (tty)
 599                         tty_flip_buffer_push(tty);
 600
 601                 up = up->next;
 602         }
 603
 604         return IRQ_HANDLED;
 605 }
 606
 607 /* A convenient way to quickly get R0 status.  The caller must _not_ hold the
 608  * port lock, it is acquired here.
 609  */
 610 static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
 611 {
 612         struct zilog_channel __iomem *channel;
 613         unsigned char status;
 614
 615         channel = ZILOG_CHANNEL_FROM_PORT(port);
 616         status = sbus_readb(&channel->control);
 617         ZSDELAY();
 618
 619         return status;
 620 }
 621
 622 /* The port lock is not held.  */
 623 static unsigned int sunzilog_tx_empty(struct uart_port *port)
 624 {
 625         unsigned long flags;
 626         unsigned char status;
 627         unsigned int ret;
 628
 629         spin_lock_irqsave(&port->lock, flags);
 630
 631         status = sunzilog_read_channel_status(port);
 632
 633         spin_unlock_irqrestore(&port->lock, flags);
 634
 635         if (status & Tx_BUF_EMP)
 636                 ret = TIOCSER_TEMT;
 637         else
 638                 ret = 0;
 639
 640         return ret;
 641 }
 642
 643 /* The port lock is held and interrupts are disabled.  */
 644 static unsigned int sunzilog_get_mctrl(struct uart_port *port)
 645 {
 646         unsigned char status;
 647         unsigned int ret;
 648
 649         status = sunzilog_read_channel_status(port);
 650
 651         ret = 0;
 652         if (status & DCD)
 653                 ret |= TIOCM_CAR;
 654         if (status & SYNC)
 655                 ret |= TIOCM_DSR;
 656         if (status & CTS)
 657                 ret |= TIOCM_CTS;
 658
 659         return ret;
 660 }
 661
 662 /* The port lock is held and interrupts are disabled.  */
 663 static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
 664 {
 665         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 666         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 667         unsigned char set_bits, clear_bits;
 668
 669         set_bits = clear_bits = 0;
 670
 671         if (mctrl & TIOCM_RTS)
 672                 set_bits |= RTS;
 673         else
 674                 clear_bits |= RTS;
 675         if (mctrl & TIOCM_DTR)
 676                 set_bits |= DTR;
 677         else
 678                 clear_bits |= DTR;
 679
 680         /* NOTE: Not subject to 'transmitter active' rule.  */
 681         up->curregs[R5] |= set_bits;
 682         up->curregs[R5] &= ~clear_bits;
 683         write_zsreg(channel, R5, up->curregs[R5]);
 684 }
 685
 686 /* The port lock is held and interrupts are disabled.  */
 687 static void sunzilog_stop_tx(struct uart_port *port, unsigned int tty_stop)
 688 {
 689         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 690
 691         up->flags |= SUNZILOG_FLAG_TX_STOPPED;
 692 }
 693
 694 /* The port lock is held and interrupts are disabled.  */
 695 static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
 696 {
 697         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 698         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 699         unsigned char status;
 700
 701         up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
 702         up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
 703
 704         status = sbus_readb(&channel->control);
 705         ZSDELAY();
 706
 707         /* TX busy?  Just wait for the TX done interrupt.  */
 708         if (!(status & Tx_BUF_EMP))
 709                 return;
 710
 711         /* Send the first character to jump-start the TX done
 712          * IRQ sending engine.
 713          */
 714         if (port->x_char) {
 715                 sbus_writeb(port->x_char, &channel->data);
 716                 ZSDELAY();
 717                 ZS_WSYNC(channel);
 718
 719                 port->icount.tx++;
 720                 port->x_char = 0;
 721         } else {
 722                 struct circ_buf *xmit = &port->info->xmit;
 723
 724                 sbus_writeb(xmit->buf[xmit->tail], &channel->data);
 725                 ZSDELAY();
 726                 ZS_WSYNC(channel);
 727
 728                 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 729                 port->icount.tx++;
 730
 731                 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 732                         uart_write_wakeup(&up->port);
 733         }
 734 }
 735
 736 /* The port lock is held.  */
 737 static void sunzilog_stop_rx(struct uart_port *port)
 738 {
 739         struct uart_sunzilog_port *up = UART_ZILOG(port);
 740         struct zilog_channel __iomem *channel;
 741
 742         if (ZS_IS_CONS(up))
 743                 return;
 744
 745         channel = ZILOG_CHANNEL_FROM_PORT(port);
 746
 747         /* Disable all RX interrupts.  */
 748         up->curregs[R1] &= ~RxINT_MASK;
 749         sunzilog_maybe_update_regs(up, channel);
 750 }
 751
 752 /* The port lock is held.  */
 753 static void sunzilog_enable_ms(struct uart_port *port)
 754 {
 755         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 756         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 757         unsigned char new_reg;
 758
 759         new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
 760         if (new_reg != up->curregs[R15]) {
 761                 up->curregs[R15] = new_reg;
 762
 763                 /* NOTE: Not subject to 'transmitter active' rule.  */
 764                 write_zsreg(channel, R15, up->curregs[R15]);
 765         }
 766 }
 767
 768 /* The port lock is not held.  */
 769 static void sunzilog_break_ctl(struct uart_port *port, int break_state)
 770 {
 771         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 772         struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
 773         unsigned char set_bits, clear_bits, new_reg;
 774         unsigned long flags;
 775
 776         set_bits = clear_bits = 0;
 777
 778         if (break_state)
 779                 set_bits |= SND_BRK;
 780         else
 781                 clear_bits |= SND_BRK;
 782
 783         spin_lock_irqsave(&port->lock, flags);
 784
 785         new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
 786         if (new_reg != up->curregs[R5]) {
 787                 up->curregs[R5] = new_reg;
 788
 789                 /* NOTE: Not subject to 'transmitter active' rule.  */
 790                 write_zsreg(channel, R5, up->curregs[R5]);
 791         }
 792
 793         spin_unlock_irqrestore(&port->lock, flags);
 794 }
 795
 796 static void __sunzilog_startup(struct uart_sunzilog_port *up)
 797 {
 798         struct zilog_channel __iomem *channel;
 799
 800         channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 801         up->prev_status = sbus_readb(&channel->control);
 802
 803         /* Enable receiver and transmitter.  */
 804         up->curregs[R3] |= RxENAB;
 805         up->curregs[R5] |= TxENAB;
 806
 807         up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
 808         sunzilog_maybe_update_regs(up, channel);
 809 }
 810
 811 static int sunzilog_startup(struct uart_port *port)
 812 {
 813         struct uart_sunzilog_port *up = UART_ZILOG(port);
 814         unsigned long flags;
 815
 816         if (ZS_IS_CONS(up))
 817                 return 0;
 818
 819         spin_lock_irqsave(&port->lock, flags);
 820         __sunzilog_startup(up);
 821         spin_unlock_irqrestore(&port->lock, flags);
 822         return 0;
 823 }
 824
 825 /*
 826  * The test for ZS_IS_CONS is explained by the following e-mail:
 827  *****
 828  * From: Russell King <rmk@arm.linux.org.uk>
 829  * Date: Sun, 8 Dec 2002 10:18:38 +0000
 830  *
 831  * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
 832  * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
 833  * > and I noticed that something is not right with reference
 834  * > counting in this case. It seems that when the console
 835  * > is open by kernel initially, this is not accounted
 836  * > as an open, and uart_startup is not called.
 837  *
 838  * That is correct.  We are unable to call uart_startup when the serial
 839  * console is initialised because it may need to allocate memory (as
 840  * request_irq does) and the memory allocators may not have been
 841  * initialised.
 842  *
 843  * 1. initialise the port into a state where it can send characters in the
 844  *    console write method.
 845  *
 846  * 2. don't do the actual hardware shutdown in your shutdown() method (but
 847  *    do the normal software shutdown - ie, free irqs etc)
 848  *****
 849  */
 850 static void sunzilog_shutdown(struct uart_port *port)
 851 {
 852         struct uart_sunzilog_port *up = UART_ZILOG(port);
 853         struct zilog_channel __iomem *channel;
 854         unsigned long flags;
 855
 856         if (ZS_IS_CONS(up))
 857                 return;
 858
 859         spin_lock_irqsave(&port->lock, flags);
 860
 861         channel = ZILOG_CHANNEL_FROM_PORT(port);
 862
 863         /* Disable receiver and transmitter.  */
 864         up->curregs[R3] &= ~RxENAB;
 865         up->curregs[R5] &= ~TxENAB;
 866
 867         /* Disable all interrupts and BRK assertion.  */
 868         up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
 869         up->curregs[R5] &= ~SND_BRK;
 870         sunzilog_maybe_update_regs(up, channel);
 871
 872         spin_unlock_irqrestore(&port->lock, flags);
 873 }
 874
 875 /* Shared by TTY driver and serial console setup.  The port lock is held
 876  * and local interrupts are disabled.
 877  */
 878 static void
 879 sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
 880                        unsigned int iflag, int brg)
 881 {
 882
 883         up->curregs[R10] = NRZ;
 884         up->curregs[R11] = TCBR | RCBR;
 885
 886         /* Program BAUD and clock source. */
 887         up->curregs[R4] &= ~XCLK_MASK;
 888         up->curregs[R4] |= X16CLK;
 889         up->curregs[R12] = brg & 0xff;
 890         up->curregs[R13] = (brg >> 8) & 0xff;
 891         up->curregs[R14] = BRSRC | BRENAB;
 892
 893         /* Character size, stop bits, and parity. */
 894         up->curregs[3] &= ~RxN_MASK;
 895         up->curregs[5] &= ~TxN_MASK;
 896         switch (cflag & CSIZE) {
 897         case CS5:
 898                 up->curregs[3] |= Rx5;
 899                 up->curregs[5] |= Tx5;
 900                 up->parity_mask = 0x1f;
 901                 break;
 902         case CS6:
 903                 up->curregs[3] |= Rx6;
 904                 up->curregs[5] |= Tx6;
 905                 up->parity_mask = 0x3f;
 906                 break;
 907         case CS7:
 908                 up->curregs[3] |= Rx7;
 909                 up->curregs[5] |= Tx7;
 910                 up->parity_mask = 0x7f;
 911                 break;
 912         case CS8:
 913         default:
 914                 up->curregs[3] |= Rx8;
 915                 up->curregs[5] |= Tx8;
 916                 up->parity_mask = 0xff;
 917                 break;
 918         };
 919         up->curregs[4] &= ~0x0c;
 920         if (cflag & CSTOPB)
 921                 up->curregs[4] |= SB2;
 922         else
 923                 up->curregs[4] |= SB1;
 924         if (cflag & PARENB)
 925                 up->curregs[4] |= PAR_ENAB;
 926         else
 927                 up->curregs[4] &= ~PAR_ENAB;
 928         if (!(cflag & PARODD))
 929                 up->curregs[4] |= PAR_EVEN;
 930         else
 931                 up->curregs[4] &= ~PAR_EVEN;
 932
 933         up->port.read_status_mask = Rx_OVR;
 934         if (iflag & INPCK)
 935                 up->port.read_status_mask |= CRC_ERR | PAR_ERR;
 936         if (iflag & (BRKINT | PARMRK))
 937                 up->port.read_status_mask |= BRK_ABRT;
 938
 939         up->port.ignore_status_mask = 0;
 940         if (iflag & IGNPAR)
 941                 up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
 942         if (iflag & IGNBRK) {
 943                 up->port.ignore_status_mask |= BRK_ABRT;
 944                 if (iflag & IGNPAR)
 945                         up->port.ignore_status_mask |= Rx_OVR;
 946         }
 947
 948         if ((cflag & CREAD) == 0)
 949                 up->port.ignore_status_mask = 0xff;
 950 }
 951
 952 /* The port lock is not held.  */
 953 static void
 954 sunzilog_set_termios(struct uart_port *port, struct termios *termios,
 955                      struct termios *old)
 956 {
 957         struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
 958         unsigned long flags;
 959         int baud, brg;
 960
 961         baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
 962
 963         spin_lock_irqsave(&up->port.lock, flags);
 964
 965         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
 966
 967         sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
 968
 969         if (UART_ENABLE_MS(&up->port, termios->c_cflag))
 970                 up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
 971         else
 972                 up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
 973
 974         up->cflag = termios->c_cflag;
 975
 976         sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
 977
 978         uart_update_timeout(port, termios->c_cflag, baud);
 979
 980         spin_unlock_irqrestore(&up->port.lock, flags);
 981 }
 982
 983 static const char *sunzilog_type(struct uart_port *port)
 984 {
 985         return "SunZilog";
 986 }
 987
 988 /* We do not request/release mappings of the registers here, this
 989  * happens at early serial probe time.
 990  */
 991 static void sunzilog_release_port(struct uart_port *port)
 992 {
 993 }
 994
 995 static int sunzilog_request_port(struct uart_port *port)
 996 {
 997         return 0;
 998 }
 999
1000 /* These do not need to do anything interesting either.  */
1001 static void sunzilog_config_port(struct uart_port *port, int flags)
1002 {
1003 }
1004
1005 /* We do not support letting the user mess with the divisor, IRQ, etc. */
1006 static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
1007 {
1008         return -EINVAL;
1009 }
1010
1011 static struct uart_ops sunzilog_pops = {
1012         .tx_empty       =       sunzilog_tx_empty,
1013         .set_mctrl      =       sunzilog_set_mctrl,
1014         .get_mctrl      =       sunzilog_get_mctrl,
1015         .stop_tx        =       sunzilog_stop_tx,
1016         .start_tx       =       sunzilog_start_tx,
1017         .stop_rx        =       sunzilog_stop_rx,
1018         .enable_ms      =       sunzilog_enable_ms,
1019         .break_ctl      =       sunzilog_break_ctl,
1020         .startup        =       sunzilog_startup,
1021         .shutdown       =       sunzilog_shutdown,
1022         .set_termios    =       sunzilog_set_termios,
1023         .type           =       sunzilog_type,
1024         .release_port   =       sunzilog_release_port,
1025         .request_port   =       sunzilog_request_port,
1026         .config_port    =       sunzilog_config_port,
1027         .verify_port    =       sunzilog_verify_port,
1028 };
1029
1030 static struct uart_sunzilog_port *sunzilog_port_table;
1031 static struct zilog_layout __iomem **sunzilog_chip_regs;
1032
1033 static struct uart_sunzilog_port *sunzilog_irq_chain;
1034 static int zilog_irq = -1;
1035
1036 static struct uart_driver sunzilog_reg = {
1037         .owner          =       THIS_MODULE,
1038         .driver_name    =       "ttyS",
1039         .devfs_name     =       "tts/",
1040         .dev_name       =       "ttyS",
1041         .major          =       TTY_MAJOR,
1042 };
1043
1044 static void * __init alloc_one_table(unsigned long size)
1045 {
1046         void *ret;
1047
1048         ret = kmalloc(size, GFP_KERNEL);
1049         if (ret != NULL)
1050                 memset(ret, 0, size);
1051
1052         return ret;
1053 }
1054
1055 static void __init sunzilog_alloc_tables(void)
1056 {
1057         sunzilog_port_table =
1058                 alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
1059         sunzilog_chip_regs =
1060                 alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *));
1061
1062         if (sunzilog_port_table == NULL || sunzilog_chip_regs == NULL) {
1063                 prom_printf("SunZilog: Cannot allocate tables.\n");
1064                 prom_halt();
1065         }
1066 }
1067
1068 #ifdef CONFIG_SPARC64
1069
1070 /* We used to attempt to use the address property of the Zilog device node
1071  * but that totally is not necessary on sparc64.
1072  */
1073 static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
1074 {
1075         void __iomem *mapped_addr;
1076         unsigned int sun4u_ino;
1077         struct sbus_bus *sbus = NULL;
1078         struct sbus_dev *sdev = NULL;
1079         int err;
1080
1081         if (central_bus == NULL) {
1082                 for_each_sbus(sbus) {
1083                         for_each_sbusdev(sdev, sbus) {
1084                                 if (sdev->prom_node == zsnode)
1085                                         goto found;
1086                         }
1087                 }
1088         }
1089  found:
1090         if (sdev == NULL && central_bus == NULL) {
1091                 prom_printf("SunZilog: sdev&&central == NULL for "
1092                             "Zilog %d in get_zs_sun4u.\n", chip);
1093                 prom_halt();
1094         }
1095         if (central_bus == NULL) {
1096                 mapped_addr =
1097                         sbus_ioremap(&sdev->resource[0], 0,
1098                                      PAGE_SIZE,
1099                                      "Zilog Registers");
1100         } else {
1101                 struct linux_prom_registers zsregs[1];
1102
1103                 err = prom_getproperty(zsnode, "reg",
1104                                        (char *) &zsregs[0],
1105                                        sizeof(zsregs));
1106                 if (err == -1) {
1107                         prom_printf("SunZilog: Cannot map "
1108                                     "Zilog %d regs on "
1109                                     "central bus.\n", chip);
1110                         prom_halt();
1111                 }
1112                 apply_fhc_ranges(central_bus->child,
1113                                  &zsregs[0], 1);
1114                 apply_central_ranges(central_bus, &zsregs[0], 1);
1115                 mapped_addr = (void __iomem *)
1116                         ((((u64)zsregs[0].which_io)<<32UL) |
1117                         ((u64)zsregs[0].phys_addr));
1118         }
1119
1120         if (zilog_irq == -1) {
1121                 if (central_bus) {
1122                         unsigned long iclr, imap;
1123
1124                         iclr = central_bus->child->fhc_regs.uregs
1125                                 + FHC_UREGS_ICLR;
1126                         imap = central_bus->child->fhc_regs.uregs
1127                                 + FHC_UREGS_IMAP;
1128                         zilog_irq = build_irq(12, 0, iclr, imap);
1129                 } else {
1130                         err = prom_getproperty(zsnode, "interrupts",
1131                                                (char *) &sun4u_ino,
1132                                                sizeof(sun4u_ino));
1133                         zilog_irq = sbus_build_irq(sbus_root, sun4u_ino);
1134                 }
1135         }
1136
1137         return (struct zilog_layout __iomem *) mapped_addr;
1138 }
1139 #else /* CONFIG_SPARC64 */
1140
1141 /*
1142  * XXX The sun4d case is utterly screwed: it tries to re-walk the tree
1143  * (for the 3rd time) in order to find bootbus and cpu. Streamline it.
1144  */
1145 static struct zilog_layout __iomem * __init get_zs_sun4cmd(int chip, int node)
1146 {
1147         struct linux_prom_irqs irq_info[2];
1148         void __iomem *mapped_addr = NULL;
1149         int zsnode, cpunode, bbnode;
1150         struct linux_prom_registers zsreg[4];
1151         struct resource res;
1152
1153         if (sparc_cpu_model == sun4d) {
1154                 int walk;
1155
1156                 zsnode = 0;
1157                 bbnode = 0;
1158                 cpunode = 0;
1159                 for (walk = prom_getchild(prom_root_node);
1160                      (walk = prom_searchsiblings(walk, "cpu-unit")) != 0;
1161                      walk = prom_getsibling(walk)) {
1162                         bbnode = prom_getchild(walk);
1163                         if (bbnode &&
1164                             (bbnode = prom_searchsiblings(bbnode, "bootbus"))) {
1165                                 if ((zsnode = prom_getchild(bbnode)) == node) {
1166                                         cpunode = walk;
1167                                         break;
1168                                 }
1169                         }
1170                 }
1171                 if (!walk) {
1172                         prom_printf("SunZilog: Cannot find the %d'th bootbus on sun4d.\n",
1173                                     (chip / 2));
1174                         prom_halt();
1175                 }
1176
1177                 if (prom_getproperty(zsnode, "reg",
1178                                      (char *) zsreg, sizeof(zsreg)) == -1) {
1179                         prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
1180                         prom_halt();
1181                 }
1182                 /* XXX Looks like an off by one? */
1183                 prom_apply_generic_ranges(bbnode, cpunode, zsreg, 1);
1184                 res.start = zsreg[0].phys_addr;
1185                 res.end = res.start + (8 - 1);
1186                 res.flags = zsreg[0].which_io | IORESOURCE_IO;
1187                 mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
1188
1189         } else {
1190                 zsnode = node;
1191
1192 #if 0 /* XXX When was this used? */
1193                 if (prom_getintdefault(zsnode, "slave", -1) != chipid) {
1194                         zsnode = prom_getsibling(zsnode);
1195                         continue;
1196                 }
1197 #endif
1198
1199                 /*
1200                  * "address" is only present on ports that OBP opened
1201                  * (from Mitch Bradley's "Hitchhiker's Guide to OBP").
1202                  * We do not use it.
1203                  */
1204
1205                 if (prom_getproperty(zsnode, "reg",
1206                                      (char *) zsreg, sizeof(zsreg)) == -1) {
1207                         prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
1208                         prom_halt();
1209                 }
1210                 if (sparc_cpu_model == sun4m)   /* Crude. Pass parent. XXX */
1211                         prom_apply_obio_ranges(zsreg, 1);
1212                 res.start = zsreg[0].phys_addr;
1213                 res.end = res.start + (8 - 1);
1214                 res.flags = zsreg[0].which_io | IORESOURCE_IO;
1215                 mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
1216         }
1217
1218         if (prom_getproperty(zsnode, "intr",
1219                              (char *) irq_info, sizeof(irq_info))
1220                     % sizeof(struct linux_prom_irqs)) {
1221                 prom_printf("SunZilog: Cannot get IRQ property for Zilog %d.\n",
1222                             chip);
1223                 prom_halt();
1224         }
1225         if (zilog_irq == -1) {
1226                 zilog_irq = irq_info[0].pri;
1227         } else if (zilog_irq != irq_info[0].pri) {
1228                 /* XXX. Dumb. Should handle per-chip IRQ, for add-ons. */
1229                 prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
1230                             chip);
1231                 prom_halt();
1232         }
1233
1234         return (struct zilog_layout __iomem *) mapped_addr;
1235 }
1236 #endif /* !(CONFIG_SPARC64) */
1237
1238 /* Get the address of the registers for SunZilog instance CHIP.  */
1239 static struct zilog_layout __iomem * __init get_zs(int chip, int node)
1240 {
1241         if (chip < 0 || chip >= NUM_SUNZILOG) {
1242                 prom_printf("SunZilog: Illegal chip number %d in get_zs.\n", chip);
1243                 prom_halt();
1244         }
1245
1246 #ifdef CONFIG_SPARC64
1247         return get_zs_sun4u(chip, node);
1248 #else
1249
1250         if (sparc_cpu_model == sun4) {
1251                 struct resource res;
1252
1253                 /* Not probe-able, hard code it. */
1254                 switch (chip) {
1255                 case 0:
1256                         res.start = 0xf1000000;
1257                         break;
1258                 case 1:
1259                         res.start = 0xf0000000;
1260                         break;
1261                 };
1262                 zilog_irq = 12;
1263                 res.end = (res.start + (8 - 1));
1264                 res.flags = IORESOURCE_IO;
1265                 return sbus_ioremap(&res, 0, 8, "SunZilog");
1266         }
1267
1268         return get_zs_sun4cmd(chip, node);
1269 #endif
1270 }
1271
1272 #define ZS_PUT_CHAR_MAX_DELAY   2000    /* 10 ms */
1273
1274 static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch)
1275 {
1276         int loops = ZS_PUT_CHAR_MAX_DELAY;
1277
1278         /* This is a timed polling loop so do not switch the explicit
1279          * udelay with ZSDELAY as that is a NOP on some platforms.  -DaveM
1280          */
1281         do {
1282                 unsigned char val = sbus_readb(&channel->control);
1283                 if (val & Tx_BUF_EMP) {
1284                         ZSDELAY();
1285                         break;
1286                 }
1287                 udelay(5);
1288         } while (--loops);
1289
1290         sbus_writeb(ch, &channel->data);
1291         ZSDELAY();
1292         ZS_WSYNC(channel);
1293 }
1294
1295 #ifdef CONFIG_SERIO
1296
1297 static DEFINE_SPINLOCK(sunzilog_serio_lock);
1298
1299 static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
1300 {
1301         struct uart_sunzilog_port *up = serio->port_data;
1302         unsigned long flags;
1303
1304         spin_lock_irqsave(&sunzilog_serio_lock, flags);
1305
1306         sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch);
1307
1308         spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1309
1310         return 0;
1311 }
1312
1313 static int sunzilog_serio_open(struct serio *serio)
1314 {
1315         struct uart_sunzilog_port *up = serio->port_data;
1316         unsigned long flags;
1317         int ret;
1318
1319         spin_lock_irqsave(&sunzilog_serio_lock, flags);
1320         if (!up->serio_open) {
1321                 up->serio_open = 1;
1322                 ret = 0;
1323         } else
1324                 ret = -EBUSY;
1325         spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1326
1327         return ret;
1328 }
1329
1330 static void sunzilog_serio_close(struct serio *serio)
1331 {
1332         struct uart_sunzilog_port *up = serio->port_data;
1333         unsigned long flags;
1334
1335         spin_lock_irqsave(&sunzilog_serio_lock, flags);
1336         up->serio_open = 0;
1337         spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
1338 }
1339
1340 #endif /* CONFIG_SERIO */
1341
1342 #ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
1343 static void
1344 sunzilog_console_write(struct console *con, const char *s, unsigned int count)
1345 {
1346         struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
1347         struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1348         unsigned long flags;
1349         int i;
1350
1351         spin_lock_irqsave(&up->port.lock, flags);
1352         for (i = 0; i < count; i++, s++) {
1353                 sunzilog_put_char(channel, *s);
1354                 if (*s == 10)
1355                         sunzilog_put_char(channel, 13);
1356         }
1357         udelay(2);
1358         spin_unlock_irqrestore(&up->port.lock, flags);
1359 }
1360
1361 static int __init sunzilog_console_setup(struct console *con, char *options)
1362 {
1363         struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
1364         unsigned long flags;
1365         int baud, brg;
1366
1367         printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
1368                (sunzilog_reg.minor - 64) + con->index, con->index);
1369
1370         /* Get firmware console settings.  */
1371         sunserial_console_termios(con);
1372
1373         /* Firmware console speed is limited to 150-->38400 baud so
1374          * this hackish cflag thing is OK.
1375          */
1376         switch (con->cflag & CBAUD) {
1377         case B150: baud = 150; break;
1378         case B300: baud = 300; break;
1379         case B600: baud = 600; break;
1380         case B1200: baud = 1200; break;
1381         case B2400: baud = 2400; break;
1382         case B4800: baud = 4800; break;
1383         default: case B9600: baud = 9600; break;
1384         case B19200: baud = 19200; break;
1385         case B38400: baud = 38400; break;
1386         };
1387
1388         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1389
1390         spin_lock_irqsave(&up->port.lock, flags);
1391
1392         up->curregs[R15] = BRKIE;
1393         sunzilog_convert_to_zs(up, con->cflag, 0, brg);
1394
1395         sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
1396         __sunzilog_startup(up);
1397
1398         spin_unlock_irqrestore(&up->port.lock, flags);
1399
1400         return 0;
1401 }
1402
1403 static struct console sunzilog_console = {
1404         .name   =       "ttyS",
1405         .write  =       sunzilog_console_write,
1406         .device =       uart_console_device,
1407         .setup  =       sunzilog_console_setup,
1408         .flags  =       CON_PRINTBUFFER,
1409         .index  =       -1,
1410         .data   =       &sunzilog_reg,
1411 };
1412 #define SUNZILOG_CONSOLE        (&sunzilog_console)
1413
1414 static int __init sunzilog_console_init(void)
1415 {
1416         int i;
1417
1418         if (con_is_present())
1419                 return 0;
1420
1421         for (i = 0; i < NUM_CHANNELS; i++) {
1422                 int this_minor = sunzilog_reg.minor + i;
1423
1424                 if ((this_minor - 64) == (serial_console - 1))
1425                         break;
1426         }
1427         if (i == NUM_CHANNELS)
1428                 return 0;
1429
1430         sunzilog_console.index = i;
1431         sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
1432         register_console(&sunzilog_console);
1433         return 0;
1434 }
1435 #else
1436 #define SUNZILOG_CONSOLE        (NULL)
1437 #define sunzilog_console_init() do { } while (0)
1438 #endif
1439
1440 /*
1441  * We scan the PROM tree recursively. This is the most reliable way
1442  * to find Zilog nodes on various platforms. However, we face an extreme
1443  * shortage of kernel stack, so we must be very careful. To that end,
1444  * we scan only to a certain depth, and we use a common property buffer
1445  * in the scan structure.
1446  */
1447 #define ZS_PROPSIZE  128
1448 #define ZS_SCAN_DEPTH   5
1449
1450 struct zs_probe_scan {
1451         int depth;
1452         void (*scanner)(struct zs_probe_scan *t, int node);
1453
1454         int devices;
1455         char prop[ZS_PROPSIZE];
1456 };
1457
1458 static int __inline__ sunzilog_node_ok(int node, const char *name, int len)
1459 {
1460         if (strncmp(name, "zs", len) == 0)
1461                 return 1;
1462         /* Don't fold this procedure just yet. Compare to su_node_ok(). */
1463         return 0;
1464 }
1465
1466 static void __init sunzilog_scan(struct zs_probe_scan *t, int node)
1467 {
1468         int len;
1469
1470         for (; node != 0; node = prom_getsibling(node)) {
1471                 len = prom_getproperty(node, "name", t->prop, ZS_PROPSIZE);
1472                 if (len <= 1)
1473                         continue;               /* Broken PROM node */
1474                 if (sunzilog_node_ok(node, t->prop, len)) {
1475                         (*t->scanner)(t, node);
1476                 } else {
1477                         if (t->depth < ZS_SCAN_DEPTH) {
1478                                 t->depth++;
1479                                 sunzilog_scan(t, prom_getchild(node));
1480                                 --t->depth;
1481                         }
1482                 }
1483         }
1484 }
1485
1486 static void __init sunzilog_prepare(void)
1487 {
1488         struct uart_sunzilog_port *up;
1489         struct zilog_layout __iomem *rp;
1490         int channel, chip;
1491
1492         /*
1493          * Temporary fix.
1494          */
1495         for (channel = 0; channel < NUM_CHANNELS; channel++)
1496                 spin_lock_init(&sunzilog_port_table[channel].port.lock);
1497
1498         sunzilog_irq_chain = up = &sunzilog_port_table[0];
1499         for (channel = 0; channel < NUM_CHANNELS - 1; channel++)
1500                 up[channel].next = &up[channel + 1];
1501         up[channel].next = NULL;
1502
1503         for (chip = 0; chip < NUM_SUNZILOG; chip++) {
1504                 rp = sunzilog_chip_regs[chip];
1505                 up[(chip * 2) + 0].port.membase = (void __iomem *)&rp->channelA;
1506                 up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
1507
1508                 /* Channel A */
1509                 up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
1510                 up[(chip * 2) + 0].port.irq = zilog_irq;
1511                 up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
1512                 up[(chip * 2) + 0].port.fifosize = 1;
1513                 up[(chip * 2) + 0].port.ops = &sunzilog_pops;
1514                 up[(chip * 2) + 0].port.type = PORT_SUNZILOG;
1515                 up[(chip * 2) + 0].port.flags = 0;
1516                 up[(chip * 2) + 0].port.line = (chip * 2) + 0;
1517                 up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
1518
1519                 /* Channel B */
1520                 up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
1521                 up[(chip * 2) + 1].port.irq = zilog_irq;
1522                 up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
1523                 up[(chip * 2) + 1].port.fifosize = 1;
1524                 up[(chip * 2) + 1].port.ops = &sunzilog_pops;
1525                 up[(chip * 2) + 1].port.type = PORT_SUNZILOG;
1526                 up[(chip * 2) + 1].port.flags = 0;
1527                 up[(chip * 2) + 1].port.line = (chip * 2) + 1;
1528                 up[(chip * 2) + 1].flags |= 0;
1529         }
1530 }
1531
1532 static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
1533 {
1534         int baud, brg;
1535
1536         if (channel == KEYBOARD_LINE) {
1537                 up->flags |= SUNZILOG_FLAG_CONS_KEYB;
1538                 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1539                 baud = 1200;
1540         } else {
1541                 up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
1542                 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1543                 baud = 4800;
1544         }
1545         printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n",
1546                channel, up->port.membase, __irq_itoa(zilog_irq));
1547
1548         up->curregs[R15] = BRKIE;
1549         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1550         sunzilog_convert_to_zs(up, up->cflag, 0, brg);
1551         sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
1552         __sunzilog_startup(up);
1553 }
1554
1555 #ifdef CONFIG_SERIO
1556 static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
1557 {
1558         struct serio *serio;
1559
1560         up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
1561         if (serio) {
1562                 memset(serio, 0, sizeof(*serio));
1563
1564                 serio->port_data = up;
1565
1566                 serio->id.type = SERIO_RS232;
1567                 if (channel == KEYBOARD_LINE) {
1568                         serio->id.proto = SERIO_SUNKBD;
1569                         strlcpy(serio->name, "zskbd", sizeof(serio->name));
1570                 } else {
1571                         serio->id.proto = SERIO_SUN;
1572                         serio->id.extra = 1;
1573                         strlcpy(serio->name, "zsms", sizeof(serio->name));
1574                 }
1575                 strlcpy(serio->phys,
1576                         (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
1577                         sizeof(serio->phys));
1578
1579                 serio->write = sunzilog_serio_write;
1580                 serio->open = sunzilog_serio_open;
1581                 serio->close = sunzilog_serio_close;
1582
1583                 serio_register_port(serio);
1584         } else {
1585                 printk(KERN_WARNING "zs%d: not enough memory for serio port\n",
1586                         channel);
1587         }
1588 }
1589 #endif
1590
1591 static void __init sunzilog_init_hw(void)
1592 {
1593         int i;
1594
1595         for (i = 0; i < NUM_CHANNELS; i++) {
1596                 struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1597                 struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
1598                 unsigned long flags;
1599                 int baud, brg;
1600
1601                 spin_lock_irqsave(&up->port.lock, flags);
1602
1603                 if (ZS_IS_CHANNEL_A(up)) {
1604                         write_zsreg(channel, R9, FHWRES);
1605                         ZSDELAY_LONG();
1606                         (void) read_zsreg(channel, R0);
1607                 }
1608
1609                 if (i == KEYBOARD_LINE || i == MOUSE_LINE) {
1610                         sunzilog_init_kbdms(up, i);
1611                         up->curregs[R9] |= (NV | MIE);
1612                         write_zsreg(channel, R9, up->curregs[R9]);
1613                 } else {
1614                         /* Normal serial TTY. */
1615                         up->parity_mask = 0xff;
1616                         up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
1617                         up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
1618                         up->curregs[R3] = RxENAB | Rx8;
1619                         up->curregs[R5] = TxENAB | Tx8;
1620                         up->curregs[R9] = NV | MIE;
1621                         up->curregs[R10] = NRZ;
1622                         up->curregs[R11] = TCBR | RCBR;
1623                         baud = 9600;
1624                         brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
1625                         up->curregs[R12] = (brg & 0xff);
1626                         up->curregs[R13] = (brg >> 8) & 0xff;
1627                         up->curregs[R14] = BRSRC | BRENAB;
1628                         __load_zsregs(channel, up->curregs);
1629                         write_zsreg(channel, R9, up->curregs[R9]);
1630                 }
1631
1632                 spin_unlock_irqrestore(&up->port.lock, flags);
1633
1634 #ifdef CONFIG_SERIO
1635                 if (i == KEYBOARD_LINE || i == MOUSE_LINE)
1636                         sunzilog_register_serio(up, i);
1637 #endif
1638         }
1639 }
1640
1641 static struct zilog_layout __iomem * __init get_zs(int chip, int node);
1642
1643 static void __init sunzilog_scan_probe(struct zs_probe_scan *t, int node)
1644 {
1645         sunzilog_chip_regs[t->devices] = get_zs(t->devices, node);
1646         t->devices++;
1647 }
1648
1649 static int __init sunzilog_ports_init(void)
1650 {
1651         struct zs_probe_scan scan;
1652         int ret;
1653         int uart_count;
1654         int i;
1655
1656         printk(KERN_DEBUG "SunZilog: %d chips.\n", NUM_SUNZILOG);
1657
1658         scan.scanner = sunzilog_scan_probe;
1659         scan.depth = 0;
1660         scan.devices = 0;
1661         sunzilog_scan(&scan, prom_getchild(prom_root_node));
1662
1663         sunzilog_prepare();
1664
1665         if (request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
1666                         "SunZilog", sunzilog_irq_chain)) {
1667                 prom_printf("SunZilog: Unable to register zs interrupt handler.\n");
1668                 prom_halt();
1669         }
1670
1671         sunzilog_init_hw();
1672
1673         /* We can only init this once we have probed the Zilogs
1674          * in the system. Do not count channels assigned to keyboards
1675          * or mice when we are deciding how many ports to register.
1676          */
1677         uart_count = 0;
1678         for (i = 0; i < NUM_CHANNELS; i++) {
1679                 struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1680
1681                 if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
1682                         continue;
1683
1684                 uart_count++;
1685         }
1686
1687         sunzilog_reg.nr = uart_count;
1688         sunzilog_reg.cons = SUNZILOG_CONSOLE;
1689
1690         sunzilog_reg.minor = sunserial_current_minor;
1691         sunserial_current_minor += uart_count;
1692
1693         ret = uart_register_driver(&sunzilog_reg);
1694         if (ret == 0) {
1695                 sunzilog_console_init();
1696                 for (i = 0; i < NUM_CHANNELS; i++) {
1697                         struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1698
1699                         if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
1700                                 continue;
1701
1702                         if (uart_add_one_port(&sunzilog_reg, &up->port)) {
1703                                 printk(KERN_ERR
1704                                     "SunZilog: failed to add port zs%d\n", i);
1705                         }
1706                 }
1707         }
1708
1709         return ret;
1710 }
1711
1712 static void __init sunzilog_scan_count(struct zs_probe_scan *t, int node)
1713 {
1714         t->devices++;
1715 }
1716
1717 static int __init sunzilog_ports_count(void)
1718 {
1719         struct zs_probe_scan scan;
1720
1721         /* Sun4 Zilog setup is hard coded, no probing to do.  */
1722         if (sparc_cpu_model == sun4)
1723                 return 2;
1724
1725         scan.scanner = sunzilog_scan_count;
1726         scan.depth = 0;
1727         scan.devices = 0;
1728
1729         sunzilog_scan(&scan, prom_getchild(prom_root_node));
1730
1731         return scan.devices;
1732 }
1733
1734 static int __init sunzilog_init(void)
1735 {
1736
1737         NUM_SUNZILOG = sunzilog_ports_count();
1738         if (NUM_SUNZILOG == 0)
1739                 return -ENODEV;
1740
1741         sunzilog_alloc_tables();
1742
1743         sunzilog_ports_init();
1744
1745         return 0;
1746 }
1747
1748 static void __exit sunzilog_exit(void)
1749 {
1750         int i;
1751
1752         for (i = 0; i < NUM_CHANNELS; i++) {
1753                 struct uart_sunzilog_port *up = &sunzilog_port_table[i];
1754
1755                 if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
1756 #ifdef CONFIG_SERIO
1757                         if (up->serio) {
1758                                 serio_unregister_port(up->serio);
1759                                 up->serio = NULL;
1760                         }
1761 #endif
1762                 } else
1763                         uart_remove_one_port(&sunzilog_reg, &up->port);
1764         }
1765
1766         uart_unregister_driver(&sunzilog_reg);
1767 }
1768
1769 module_init(sunzilog_init);
1770 module_exit(sunzilog_exit);
1771
1772 MODULE_AUTHOR("David S. Miller");
1773 MODULE_DESCRIPTION("Sun Zilog serial port driver");
1774 MODULE_LICENSE("GPL");