git.oblomov.eu Git - linux-2.6/blob - drivers/char/ec3104_keyb.c

   1 /*
   2  * linux/drivers/char/ec3104_keyb.c
   3  *
   4  * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
   5  *
   6  * based on linux/drivers/char/pc_keyb.c, which had the following comments:
   7  *
   8  * Separation of the PC low-level part by Geert Uytterhoeven, May 1997
   9  * See keyboard.c for the whole history.
  10  *
  11  * Major cleanup by Martin Mares, May 1997
  12  *
  13  * Combined the keyboard and PS/2 mouse handling into one file,
  14  * because they share the same hardware.
  15  * Johan Myreen <jem@iki.fi> 1998-10-08.
  16  *
  17  * Code fixes to handle mouse ACKs properly.
  18  * C. Scott Ananian <cananian@alumni.princeton.edu> 1999-01-29.
  19  */
  20 /* EC3104 note:
  21  * This code was written without any documentation about the EC3104 chip.  While
  22  * I hope I got most of the basic functionality right, the register names I use
  23  * are most likely completely different from those in the chip documentation.
  24  *
  25  * If you have any further information about the EC3104, please tell me
  26  * (prumpf@tux.org).
  27  */
  28
  29
  30 #include <linux/spinlock.h>
  31 #include <linux/sched.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/tty.h>
  34 #include <linux/mm.h>
  35 #include <linux/signal.h>
  36 #include <linux/init.h>
  37 #include <linux/kbd_ll.h>
  38 #include <linux/delay.h>
  39 #include <linux/random.h>
  40 #include <linux/poll.h>
  41 #include <linux/miscdevice.h>
  42 #include <linux/slab.h>
  43 #include <linux/kbd_kern.h>
  44 #include <linux/bitops.h>
  45
  46 #include <asm/keyboard.h>
  47 #include <asm/uaccess.h>
  48 #include <asm/irq.h>
  49 #include <asm/system.h>
  50 #include <asm/ec3104.h>
  51
  52 #include <asm/io.h>
  53
  54 /* Some configuration switches are present in the include file... */
  55
  56 #include <linux/pc_keyb.h>
  57
  58 #define MSR_CTS 0x10
  59 #define MCR_RTS 0x02
  60 #define LSR_DR 0x01
  61 #define LSR_BOTH_EMPTY 0x60
  62
  63 static struct e5_struct {
  64         u8 packet[8];
  65         int pos;
  66         int length;
  67
  68         u8 cached_mcr;
  69         u8 last_msr;
  70 } ec3104_keyb;
  71
  72 /* Simple translation table for the SysRq keys */
  73
  74
  75 #ifdef CONFIG_MAGIC_SYSRQ
  76 unsigned char ec3104_kbd_sysrq_xlate[128] =
  77         "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
  78         "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
  79         "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
  80         "bnm,./\000*\000 \000\201\202\203\204\205"      /* 0x30 - 0x3f */
  81         "\206\207\210\211\212\000\000789-456+1"         /* 0x40 - 0x4f */
  82         "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
  83         "\r\000/";                                      /* 0x60 - 0x6f */
  84 #endif
  85
  86 static void kbd_write_command_w(int data);
  87 static void kbd_write_output_w(int data);
  88 #ifdef CONFIG_PSMOUSE
  89 static void aux_write_ack(int val);
  90 static void __aux_write_ack(int val);
  91 #endif
  92
  93 static DEFINE_SPINLOCK(kbd_controller_lock);
  94 static unsigned char handle_kbd_event(void);
  95
  96 /* used only by send_data - set by keyboard_interrupt */
  97 static volatile unsigned char reply_expected;
  98 static volatile unsigned char acknowledge;
  99 static volatile unsigned char resend;
 100
 101
 102 int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
 103 {
 104         return 0;
 105 }
 106
 107 int ec3104_kbd_getkeycode(unsigned int scancode)
 108 {
 109         return 0;
 110 }
 111
 112
 113 /* yes, it probably would be faster to use an array.  I don't care. */
 114
 115 static inline unsigned char ec3104_scan2key(unsigned char scancode)
 116 {
 117         switch (scancode) {
 118         case  1: /* '`' */
 119                 return 41;
 120
 121         case  2 ... 27:
 122                 return scancode;
 123
 124         case 28: /* '\\' */
 125                 return 43;
 126
 127         case 29 ... 39:
 128                 return scancode + 1;
 129
 130         case 40: /* '\r' */
 131                 return 28;
 132
 133         case 41 ... 50:
 134                 return scancode + 3;
 135
 136         case 51: /* ' ' */
 137                 return 57;
 138
 139         case 52: /* escape */
 140                 return 1;
 141
 142         case 54: /* insert/delete (labelled delete) */
 143                 /* this should arguably be 110, but I'd like to have ctrl-alt-del
 144                  * working with a standard keymap */
 145                 return 111;
 146
 147         case 55: /* left */
 148                 return 105;
 149         case 56: /* home */
 150                 return 102;
 151         case 57: /* end */
 152                 return 107;
 153         case 58: /* up */
 154                 return 103;
 155         case 59: /* down */
 156                 return 108;
 157         case 60: /* pgup */
 158                 return 104;
 159         case 61: /* pgdown */
 160                 return 109;
 161         case 62: /* right */
 162                 return 106;
 163
 164         case 79 ... 88: /* f1 - f10 */
 165                 return scancode - 20;
 166
 167         case 89 ... 90: /* f11 - f12 */
 168                 return scancode - 2;
 169
 170         case 91: /* left shift */
 171                 return 42;
 172
 173         case 92: /* right shift */
 174                 return 54;
 175
 176         case 93: /* left alt */
 177                 return 56;
 178         case 94: /* right alt */
 179                 return 100;
 180         case 95: /* left ctrl */
 181                 return 29;
 182         case 96: /* right ctrl */
 183                 return 97;
 184
 185         case 97: /* caps lock */
 186                 return 58;
 187         case 102: /* left windows */
 188                 return 125;
 189         case 103: /* right windows */
 190                 return 126;
 191
 192         case 106: /* Fn */
 193                 /* this is wrong. */
 194                 return 84;
 195
 196         default:
 197                 return 0;
 198         }
 199 }
 200
 201 int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode,
 202                     char raw_mode)
 203 {
 204         scancode &= 0x7f;
 205
 206         *keycode = ec3104_scan2key(scancode);
 207
 208         return 1;
 209 }
 210
 211 char ec3104_kbd_unexpected_up(unsigned char keycode)
 212 {
 213         return 0200;
 214 }
 215
 216 static inline void handle_keyboard_event(unsigned char scancode)
 217 {
 218 #ifdef CONFIG_VT
 219         handle_scancode(scancode, !(scancode & 0x80));
 220 #endif
 221         tasklet_schedule(&keyboard_tasklet);
 222 }
 223
 224 void ec3104_kbd_leds(unsigned char leds)
 225 {
 226 }
 227
 228 static u8 e5_checksum(u8 *packet, int count)
 229 {
 230         int i;
 231         u8 sum = 0;
 232
 233         for (i=0; i<count; i++)
 234                 sum ^= packet[i];
 235
 236         if (sum & 0x80)
 237                 sum ^= 0xc0;
 238
 239         return sum;
 240 }
 241
 242 static void e5_wait_for_cts(struct e5_struct *k)
 243 {
 244         u8 msr;
 245
 246         do {
 247                 msr = ctrl_inb(EC3104_SER4_MSR);
 248         } while (!(msr & MSR_CTS));
 249 }
 250
 251
 252 static void e5_send_byte(u8 byte, struct e5_struct *k)
 253 {
 254         u8 status;
 255
 256         do {
 257                 status = ctrl_inb(EC3104_SER4_LSR);
 258         } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
 259
 260         printk("<%02x>", byte);
 261
 262         ctrl_outb(byte, EC3104_SER4_DATA);
 263
 264         do {
 265                 status = ctrl_inb(EC3104_SER4_LSR);
 266         } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
 267
 268 }
 269
 270 static int e5_send_packet(u8 *packet, int count, struct e5_struct *k)
 271 {
 272         int i;
 273
 274         disable_irq(EC3104_IRQ_SER4);
 275
 276         if (k->cached_mcr & MCR_RTS) {
 277                 printk("e5_send_packet: too slow\n");
 278                 enable_irq(EC3104_IRQ_SER4);
 279                 return -EAGAIN;
 280         }
 281
 282         k->cached_mcr |= MCR_RTS;
 283         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 284
 285         e5_wait_for_cts(k);
 286
 287         printk("p: ");
 288
 289         for(i=0; i<count; i++)
 290                 e5_send_byte(packet[i], k);
 291
 292         e5_send_byte(e5_checksum(packet, count), k);
 293
 294         printk("\n");
 295
 296         udelay(1500);
 297
 298         k->cached_mcr &= ~MCR_RTS;
 299         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 300
 301         set_current_state(TASK_UNINTERRUPTIBLE);
 302
 303
 304
 305         enable_irq(EC3104_IRQ_SER4);
 306
 307
 308
 309         return 0;
 310 }
 311
 312 /*
 313  * E5 packets we know about:
 314  * E5->host 0x80 0x05 <checksum> - resend packet
 315  * host->E5 0x83 0x43 <contrast> - set LCD contrast
 316  * host->E5 0x85 0x41 0x02 <brightness> 0x02 - set LCD backlight
 317  * E5->host 0x87 <ps2 packet> 0x00 <checksum> - external PS2
 318  * E5->host 0x88 <scancode> <checksum> - key press
 319  */
 320
 321 static void e5_receive(struct e5_struct *k)
 322 {
 323         k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA);
 324
 325         if (k->pos == 1) {
 326                 switch(k->packet[0]) {
 327                 case 0x80:
 328                         k->length = 3;
 329                         break;
 330
 331                 case 0x87: /* PS2 ext */
 332                         k->length = 6;
 333                         break;
 334
 335                 case 0x88: /* keyboard */
 336                         k->length = 3;
 337                         break;
 338
 339                 default:
 340                         k->length = 1;
 341                         printk(KERN_WARNING "unknown E5 packet %02x\n",
 342                                k->packet[0]);
 343                 }
 344         }
 345
 346         if (k->pos == k->length) {
 347                 int i;
 348
 349                 if (e5_checksum(k->packet, k->length) != 0)
 350                         printk(KERN_WARNING "E5: wrong checksum\n");
 351
 352 #if 0
 353                 printk("E5 packet [");
 354                 for(i=0; i<k->length; i++) {
 355                         printk("%02x ", k->packet[i]);
 356                 }
 357
 358                 printk("(%02x)]\n", e5_checksum(k->packet, k->length-1));
 359 #endif
 360
 361                 switch(k->packet[0]) {
 362                 case 0x80:
 363                 case 0x88:
 364                         handle_keyboard_event(k->packet[1]);
 365                         break;
 366                 }
 367
 368                 k->pos = k->length = 0;
 369         }
 370 }
 371
 372 static void ec3104_keyb_interrupt(int irq, void *data)
 373 {
 374         struct e5_struct *k = &ec3104_keyb;
 375         u8 msr, lsr;
 376
 377         msr = ctrl_inb(EC3104_SER4_MSR);
 378
 379         if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
 380                 if (k->cached_mcr & MCR_RTS)
 381                         printk("confused: RTS already high\n");
 382                 /* CTS went high.  Send RTS. */
 383                 k->cached_mcr |= MCR_RTS;
 384
 385                 ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 386         } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
 387                 /* CTS went low. */
 388                 if (!(k->cached_mcr & MCR_RTS))
 389                         printk("confused: RTS already low\n");
 390
 391                 k->cached_mcr &= ~MCR_RTS;
 392
 393                 ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 394         }
 395
 396         k->last_msr = msr;
 397
 398         lsr = ctrl_inb(EC3104_SER4_LSR);
 399
 400         if (lsr & LSR_DR)
 401                 e5_receive(k);
 402 }
 403
 404 static void ec3104_keyb_clear_state(void)
 405 {
 406         struct e5_struct *k = &ec3104_keyb;
 407         u8 msr, lsr;
 408
 409         /* we want CTS to be low */
 410         k->last_msr = 0;
 411
 412         for (;;) {
 413                 msleep(100);
 414
 415                 msr = ctrl_inb(EC3104_SER4_MSR);
 416
 417                 lsr = ctrl_inb(EC3104_SER4_LSR);
 418
 419                 if (lsr & LSR_DR) {
 420                         e5_receive(k);
 421                         continue;
 422                 }
 423
 424                 if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
 425                         if (k->cached_mcr & MCR_RTS)
 426                                 printk("confused: RTS already high\n");
 427                         /* CTS went high.  Send RTS. */
 428                         k->cached_mcr |= MCR_RTS;
 429
 430                         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 431                 } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
 432                         /* CTS went low. */
 433                         if (!(k->cached_mcr & MCR_RTS))
 434                                 printk("confused: RTS already low\n");
 435
 436                         k->cached_mcr &= ~MCR_RTS;
 437
 438                         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 439                 } else
 440                         break;
 441
 442                 k->last_msr = msr;
 443
 444                 continue;
 445         }
 446 }
 447
 448 void __init ec3104_kbd_init_hw(void)
 449 {
 450         ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR);
 451         ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR);
 452
 453         ec3104_keyb_clear_state();
 454
 455         /* Ok, finally allocate the IRQ, and off we go.. */
 456         request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL);
 457 }