2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
3 * Copyright(c) 2008 Red Hat, Inc. All rights reserved.
4 * Copyright(c) 2008 Mike Christie
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along with
16 * this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 * Maintained at www.Open-FCoE.org
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
31 #include <scsi/scsi_tcq.h>
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_host.h>
34 #include <scsi/scsi_device.h>
35 #include <scsi/scsi_cmnd.h>
37 #include <scsi/fc/fc_fc2.h>
39 #include <scsi/libfc.h>
40 #include <scsi/fc_encode.h>
42 MODULE_AUTHOR("Open-FCoE.org");
43 MODULE_DESCRIPTION("libfc");
44 MODULE_LICENSE("GPL");
46 static int fc_fcp_debug;
48 #define FC_DEBUG_FCP(fmt...) \
54 static struct kmem_cache *scsi_pkt_cachep;
56 /* SRB state definitions */
57 #define FC_SRB_FREE 0 /* cmd is free */
58 #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */
59 #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */
60 #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */
61 #define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */
62 #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
63 #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
64 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
65 #define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */
67 #define FC_SRB_READ (1 << 1)
68 #define FC_SRB_WRITE (1 << 0)
71 * The SCp.ptr should be tested and set under the host lock. NULL indicates
72 * that the command has been retruned to the scsi layer.
74 #define CMD_SP(Cmnd) ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
75 #define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
76 #define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
77 #define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
78 #define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
80 struct fc_fcp_internal {
81 mempool_t *scsi_pkt_pool;
82 struct list_head scsi_pkt_queue;
86 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
90 * FC scsi I/O related functions
92 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
93 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
94 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
95 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
96 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
97 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp);
98 static void fc_timeout_error(struct fc_fcp_pkt *);
99 static void fc_fcp_timeout(unsigned long data);
100 static void fc_fcp_rec(struct fc_fcp_pkt *);
101 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
102 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
103 static void fc_io_compl(struct fc_fcp_pkt *);
105 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
106 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
107 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
110 * command status codes
112 #define FC_COMPLETE 0
113 #define FC_CMD_ABORTED 1
114 #define FC_CMD_RESET 2
115 #define FC_CMD_PLOGO 3
117 #define FC_TRANS_ERR 5
118 #define FC_DATA_OVRRUN 6
119 #define FC_DATA_UNDRUN 7
121 #define FC_HRD_ERROR 9
122 #define FC_CMD_TIME_OUT 10
125 * Error recovery timeout values.
127 #define FC_SCSI_ER_TIMEOUT (10 * HZ)
128 #define FC_SCSI_TM_TOV (10 * HZ)
129 #define FC_SCSI_REC_TOV (2 * HZ)
130 #define FC_HOST_RESET_TIMEOUT (30 * HZ)
132 #define FC_MAX_ERROR_CNT 5
133 #define FC_MAX_RECOV_RETRY 3
135 #define FC_FCP_DFLT_QUEUE_DEPTH 32
138 * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet
139 * @lp: fc lport struct
140 * @gfp: gfp flags for allocation
142 * This is used by upper layer scsi driver.
143 * Return Value : scsi_pkt structure or null on allocation failure.
144 * Context : call from process context. no locking required.
146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp)
148 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
149 struct fc_fcp_pkt *fsp;
151 fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
153 memset(fsp, 0, sizeof(*fsp));
155 atomic_set(&fsp->ref_cnt, 1);
156 init_timer(&fsp->timer);
157 INIT_LIST_HEAD(&fsp->list);
158 spin_lock_init(&fsp->scsi_pkt_lock);
164 * fc_fcp_pkt_release() - release hold on scsi_pkt packet
165 * @fsp: fcp packet struct
167 * This is used by upper layer scsi driver.
168 * Context : call from process and interrupt context.
169 * no locking required
171 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
173 if (atomic_dec_and_test(&fsp->ref_cnt)) {
174 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
176 mempool_free(fsp, si->scsi_pkt_pool);
180 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
182 atomic_inc(&fsp->ref_cnt);
186 * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
187 * @seq: exchange sequence
188 * @fsp: fcp packet struct
190 * Release hold on scsi_pkt packet set to keep scsi_pkt
191 * till EM layer exch resource is not freed.
192 * Context : called from from EM layer.
193 * no locking required
195 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
197 fc_fcp_pkt_release(fsp);
201 * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
204 * We should only return error if we return a command to scsi-ml before
205 * getting a response. This can happen in cases where we send a abort, but
206 * do not wait for the response and the abort and command can be passing
207 * each other on the wire/network-layer.
209 * Note: this function locks the packet and gets a reference to allow
210 * callers to call the completion function while the lock is held and
211 * not have to worry about the packets refcount.
213 * TODO: Maybe we should just have callers grab/release the lock and
214 * have a function that they call to verify the fsp and grab a ref if
217 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
219 spin_lock_bh(&fsp->scsi_pkt_lock);
220 if (fsp->state & FC_SRB_COMPL) {
221 spin_unlock_bh(&fsp->scsi_pkt_lock);
225 fc_fcp_pkt_hold(fsp);
229 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
231 spin_unlock_bh(&fsp->scsi_pkt_lock);
232 fc_fcp_pkt_release(fsp);
235 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
237 if (!(fsp->state & FC_SRB_COMPL))
238 mod_timer(&fsp->timer, jiffies + delay);
241 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
246 fsp->state |= FC_SRB_ABORT_PENDING;
247 return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
252 * An abort isn't needed.
254 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
257 fsp->lp->tt.exch_done(fsp->seq_ptr);
261 fsp->state &= ~FC_SRB_ABORT_PENDING;
262 fsp->io_status = SUGGEST_RETRY << 24;
263 fsp->status_code = FC_ERROR;
264 fc_fcp_complete_locked(fsp);
268 * Receive SCSI data from target.
269 * Called after receiving solicited data.
271 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
273 struct scsi_cmnd *sc = fsp->cmd;
274 struct fc_lport *lp = fsp->lp;
275 struct fcoe_dev_stats *stats;
276 struct fc_frame_header *fh;
283 struct scatterlist *sg;
286 fh = fc_frame_header_get(fp);
287 offset = ntohl(fh->fh_parm_offset);
288 start_offset = offset;
289 len = fr_len(fp) - sizeof(*fh);
290 buf = fc_frame_payload_get(fp, 0);
292 if (offset + len > fsp->data_len) {
293 /* this should never happen */
294 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
295 fc_frame_crc_check(fp))
297 FC_DEBUG_FCP("data received past end. len %zx offset %zx "
298 "data_len %x\n", len, offset, fsp->data_len);
299 fc_fcp_retry_cmd(fsp);
302 if (offset != fsp->xfer_len)
303 fsp->state |= FC_SRB_DISCONTIG;
306 if (fr_flags(fp) & FCPHF_CRC_UNCHECKED)
307 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
309 sg = scsi_sglist(sc);
312 while (remaining > 0 && sg) {
317 if (offset >= sg->length) {
318 offset -= sg->length;
322 sg_bytes = min(remaining, sg->length - offset);
325 * The scatterlist item may be bigger than PAGE_SIZE,
326 * but we are limited to mapping PAGE_SIZE at a time.
328 off = offset + sg->offset;
329 sg_bytes = min(sg_bytes, (size_t)
330 (PAGE_SIZE - (off & ~PAGE_MASK)));
331 page_addr = kmap_atomic(sg_page(sg) + (off >> PAGE_SHIFT),
334 break; /* XXX panic? */
336 if (fr_flags(fp) & FCPHF_CRC_UNCHECKED)
337 crc = crc32(crc, buf, sg_bytes);
338 memcpy((char *)page_addr + (off & ~PAGE_MASK), buf,
341 kunmap_atomic(page_addr, KM_SOFTIRQ0);
344 remaining -= sg_bytes;
345 copy_len += sg_bytes;
348 if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
349 buf = fc_frame_payload_get(fp, 0);
351 crc = crc32(crc, buf + len, 4 - (len % 4));
352 len += 4 - (len % 4);
355 if (~crc != le32_to_cpu(fr_crc(fp))) {
357 stats = lp->dev_stats[smp_processor_id()];
358 stats->ErrorFrames++;
359 if (stats->InvalidCRCCount++ < 5)
360 FC_DBG("CRC error on data frame\n");
362 * Assume the frame is total garbage.
363 * We may have copied it over the good part
365 * If so, we need to retry the entire operation.
366 * Otherwise, ignore it.
368 if (fsp->state & FC_SRB_DISCONTIG)
369 fc_fcp_retry_cmd(fsp);
374 if (fsp->xfer_contig_end == start_offset)
375 fsp->xfer_contig_end += copy_len;
376 fsp->xfer_len += copy_len;
379 * In the very rare event that this data arrived after the response
380 * and completes the transfer, call the completion handler.
382 if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
383 fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
384 fc_fcp_complete_locked(fsp);
388 * fc_fcp_send_data() - Send SCSI data to target.
389 * @fsp: ptr to fc_fcp_pkt
390 * @sp: ptr to this sequence
391 * @offset: starting offset for this data request
392 * @seq_blen: the burst length for this data request
394 * Called after receiving a Transfer Ready data descriptor.
395 * if LLD is capable of seq offload then send down seq_blen
396 * size of data in single frame, otherwise send multiple FC
397 * frames of max FC frame payload supported by target port.
399 * Returns : 0 for success.
401 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
402 size_t offset, size_t seq_blen)
405 struct scsi_cmnd *sc;
406 struct scatterlist *sg;
407 struct fc_frame *fp = NULL;
408 struct fc_lport *lp = fsp->lp;
413 size_t frame_offset, fh_parm_offset;
417 int using_sg = lp->sg_supp;
420 WARN_ON(seq_blen <= 0);
421 if (unlikely(offset + seq_blen > fsp->data_len)) {
422 /* this should never happen */
423 FC_DEBUG_FCP("xfer-ready past end. seq_blen %zx offset %zx\n",
425 fc_fcp_send_abort(fsp);
427 } else if (offset != fsp->xfer_len) {
428 /* Out of Order Data Request - no problem, but unexpected. */
429 FC_DEBUG_FCP("xfer-ready non-contiguous. "
430 "seq_blen %zx offset %zx\n", seq_blen, offset);
434 * if LLD is capable of seq_offload then set transport
435 * burst length (t_blen) to seq_blen, otherwise set t_blen
436 * to max FC frame payload previously set in fsp->max_payload.
438 t_blen = lp->seq_offload ? seq_blen : fsp->max_payload;
439 WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD);
441 t_blen &= ~(512 - 1); /* round down to block size */
442 WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD); /* won't go below 256 */
445 remaining = seq_blen;
446 fh_parm_offset = frame_offset = offset;
448 seq = lp->tt.seq_start_next(seq);
449 f_ctl = FC_FC_REL_OFF;
453 * If a get_page()/put_page() will fail, don't use sg lists
454 * in the fc_frame structure.
456 * The put_page() may be long after the I/O has completed
457 * in the case of FCoE, since the network driver does it
458 * via free_skb(). See the test in free_pages_check().
460 * Test this case with 'dd </dev/zero >/dev/st0 bs=64k'.
463 for (sg = scsi_sglist(sc); sg; sg = sg_next(sg)) {
464 if (page_count(sg_page(sg)) == 0 ||
465 (sg_page(sg)->flags & (1 << PG_lru |
479 sg = scsi_sglist(sc);
481 while (remaining > 0 && sg) {
482 if (offset >= sg->length) {
483 offset -= sg->length;
488 tlen = min(t_blen, remaining);
491 * TODO. Temporary workaround. fc_seq_send() can't
492 * handle odd lengths in non-linear skbs.
493 * This will be the final fragment only.
498 fp = _fc_frame_alloc(lp, 0);
502 fp = fc_frame_alloc(lp, tlen);
506 data = (void *)(fr_hdr(fp)) +
507 sizeof(struct fc_frame_header);
509 fh_parm_offset = frame_offset;
510 fr_max_payload(fp) = fsp->max_payload;
512 sg_bytes = min(tlen, sg->length - offset);
514 WARN_ON(skb_shinfo(fp_skb(fp))->nr_frags >
516 get_page(sg_page(sg));
517 skb_fill_page_desc(fp_skb(fp),
518 skb_shinfo(fp_skb(fp))->nr_frags,
519 sg_page(sg), sg->offset + offset,
521 fp_skb(fp)->data_len += sg_bytes;
522 fr_len(fp) += sg_bytes;
523 fp_skb(fp)->truesize += PAGE_SIZE;
525 size_t off = offset + sg->offset;
528 * The scatterlist item may be bigger than PAGE_SIZE,
529 * but we must not cross pages inside the kmap.
531 sg_bytes = min(sg_bytes, (size_t) (PAGE_SIZE -
532 (off & ~PAGE_MASK)));
533 page_addr = kmap_atomic(sg_page(sg) +
536 memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
538 kunmap_atomic(page_addr, KM_SOFTIRQ0);
542 frame_offset += sg_bytes;
544 remaining -= sg_bytes;
550 * Send sequence with transfer sequence initiative in case
551 * this is last FCP frame of the sequence.
554 f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
556 ep = fc_seq_exch(seq);
557 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
558 FC_TYPE_FCP, f_ctl, fh_parm_offset);
561 * send fragment using for a sequence.
563 error = lp->tt.seq_send(lp, seq, fp);
565 WARN_ON(1); /* send error should be rare */
566 fc_fcp_retry_cmd(fsp);
571 fsp->xfer_len += seq_blen; /* premature count? */
575 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
578 struct fc_ba_rjt *brp;
579 struct fc_frame_header *fh;
581 fh = fc_frame_header_get(fp);
582 switch (fh->fh_r_ctl) {
586 brp = fc_frame_payload_get(fp, sizeof(*brp));
587 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
592 * we will let the command timeout
593 * and scsi-ml recover in this case,
594 * therefore cleared the ba_done flag.
600 fsp->state |= FC_SRB_ABORTED;
601 fsp->state &= ~FC_SRB_ABORT_PENDING;
603 if (fsp->wait_for_comp)
604 complete(&fsp->tm_done);
606 fc_fcp_complete_locked(fsp);
611 * fc_fcp_reduce_can_queue() - drop can_queue
612 * @lp: lport to drop queueing for
614 * If we are getting memory allocation failures, then we may
615 * be trying to execute too many commands. We let the running
616 * commands complete or timeout, then try again with a reduced
617 * can_queue. Eventually we will hit the point where we run
618 * on all reserved structs.
620 static void fc_fcp_reduce_can_queue(struct fc_lport *lp)
622 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
626 spin_lock_irqsave(lp->host->host_lock, flags);
631 can_queue = lp->host->can_queue;
635 lp->host->can_queue = can_queue;
636 shost_printk(KERN_ERR, lp->host, "Could not allocate frame.\n"
637 "Reducing can_queue to %d.\n", can_queue);
639 spin_unlock_irqrestore(lp->host->host_lock, flags);
643 * fc_fcp_recv() - Reveive FCP frames
644 * @seq: The sequence the frame is on
646 * @arg: The related FCP packet
649 * Context : called from Soft IRQ context
650 * can not called holding list lock
652 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
654 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
656 struct fc_frame_header *fh;
657 struct fcp_txrdy *dd;
664 fh = fc_frame_header_get(fp);
665 r_ctl = fh->fh_r_ctl;
668 if (!(lp->state & LPORT_ST_READY))
670 if (fc_fcp_lock_pkt(fsp))
672 fsp->last_pkt_time = jiffies;
674 if (fh->fh_type == FC_TYPE_BLS) {
675 fc_fcp_abts_resp(fsp, fp);
679 if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
682 if (r_ctl == FC_RCTL_DD_DATA_DESC) {
684 * received XFER RDY from the target
685 * need to send data to the target
687 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
688 dd = fc_frame_payload_get(fp, sizeof(*dd));
691 rc = fc_fcp_send_data(fsp, seq,
692 (size_t) ntohl(dd->ft_data_ro),
693 (size_t) ntohl(dd->ft_burst_len));
695 seq->rec_data = fsp->xfer_len;
696 else if (rc == -ENOMEM)
697 fsp->state |= FC_SRB_NOMEM;
698 } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
700 * received a DATA frame
701 * next we will copy the data to the system buffer
703 WARN_ON(fr_len(fp) < sizeof(*fh)); /* len may be 0 */
704 fc_fcp_recv_data(fsp, fp);
705 seq->rec_data = fsp->xfer_contig_end;
706 } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
707 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
709 fc_fcp_resp(fsp, fp);
711 FC_DBG("unexpected frame. r_ctl %x\n", r_ctl);
714 fc_fcp_unlock_pkt(fsp);
719 fc_fcp_error(fsp, fp);
720 else if (rc == -ENOMEM)
721 fc_fcp_reduce_can_queue(lp);
724 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
726 struct fc_frame_header *fh;
727 struct fcp_resp *fc_rp;
728 struct fcp_resp_ext *rp_ex;
729 struct fcp_resp_rsp_info *fc_rp_info;
737 fh = (struct fc_frame_header *)fr_hdr(fp);
738 if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
741 fc_rp = (struct fcp_resp *)(fh + 1);
742 fsp->cdb_status = fc_rp->fr_status;
743 flags = fc_rp->fr_flags;
744 fsp->scsi_comp_flags = flags;
745 expected_len = fsp->data_len;
747 if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
748 rp_ex = (void *)(fc_rp + 1);
749 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
750 if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
752 fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
753 if (flags & FCP_RSP_LEN_VAL) {
754 respl = ntohl(rp_ex->fr_rsp_len);
755 if (respl != sizeof(*fc_rp_info))
757 if (fsp->wait_for_comp) {
758 /* Abuse cdb_status for rsp code */
759 fsp->cdb_status = fc_rp_info->rsp_code;
760 complete(&fsp->tm_done);
762 * tmfs will not have any scsi cmd so
769 if (flags & FCP_SNS_LEN_VAL) {
770 snsl = ntohl(rp_ex->fr_sns_len);
771 if (snsl > SCSI_SENSE_BUFFERSIZE)
772 snsl = SCSI_SENSE_BUFFERSIZE;
773 memcpy(fsp->cmd->sense_buffer,
774 (char *)fc_rp_info + respl, snsl);
777 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
778 if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
780 if (flags & FCP_RESID_UNDER) {
781 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
783 * The cmnd->underflow is the minimum number of
784 * bytes that must be transfered for this
785 * command. Provided a sense condition is not
786 * present, make sure the actual amount
787 * transferred is at least the underflow value
790 if (!(flags & FCP_SNS_LEN_VAL) &&
791 (fc_rp->fr_status == 0) &&
792 (scsi_bufflen(fsp->cmd) -
793 fsp->scsi_resid) < fsp->cmd->underflow)
795 expected_len -= fsp->scsi_resid;
797 fsp->status_code = FC_ERROR;
801 fsp->state |= FC_SRB_RCV_STATUS;
804 * Check for missing or extra data frames.
806 if (unlikely(fsp->xfer_len != expected_len)) {
807 if (fsp->xfer_len < expected_len) {
809 * Some data may be queued locally,
810 * Wait a at least one jiffy to see if it is delivered.
811 * If this expires without data, we may do SRR.
813 fc_fcp_timer_set(fsp, 2);
816 fsp->status_code = FC_DATA_OVRRUN;
817 FC_DBG("tgt %6x xfer len %zx greater than expected len %x. "
820 fsp->xfer_len, expected_len, fsp->data_len);
822 fc_fcp_complete_locked(fsp);
826 FC_DBG("short FCP response. flags 0x%x len %u respl %u snsl %u\n",
827 flags, fr_len(fp), respl, snsl);
829 fsp->status_code = FC_ERROR;
830 fc_fcp_complete_locked(fsp);
834 * fc_fcp_complete_locked() - complete processing of a fcp packet
837 * This function may sleep if a timer is pending. The packet lock must be
838 * held, and the host lock must not be held.
840 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
842 struct fc_lport *lp = fsp->lp;
847 if (fsp->state & FC_SRB_ABORT_PENDING)
850 if (fsp->state & FC_SRB_ABORTED) {
851 if (!fsp->status_code)
852 fsp->status_code = FC_CMD_ABORTED;
855 * Test for transport underrun, independent of response
858 if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
859 (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
860 fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
861 fsp->status_code = FC_DATA_UNDRUN;
862 fsp->io_status = SUGGEST_RETRY << 24;
869 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
870 struct fc_frame *conf_frame;
873 csp = lp->tt.seq_start_next(seq);
874 conf_frame = fc_frame_alloc(fsp->lp, 0);
876 f_ctl = FC_FC_SEQ_INIT;
877 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
878 ep = fc_seq_exch(seq);
879 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
881 FC_TYPE_FCP, f_ctl, 0);
882 lp->tt.seq_send(lp, csp, conf_frame);
885 lp->tt.exch_done(seq);
890 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
892 struct fc_lport *lp = fsp->lp;
895 lp->tt.exch_done(fsp->seq_ptr);
898 fsp->status_code = error;
902 * fc_fcp_cleanup_each_cmd() - Cleanup active commads
906 * @error: fsp status code
908 * If lun or id is -1, they are ignored.
910 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lp, unsigned int id,
911 unsigned int lun, int error)
913 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
914 struct fc_fcp_pkt *fsp;
915 struct scsi_cmnd *sc_cmd;
918 spin_lock_irqsave(lp->host->host_lock, flags);
920 list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
922 if (id != -1 && scmd_id(sc_cmd) != id)
925 if (lun != -1 && sc_cmd->device->lun != lun)
928 fc_fcp_pkt_hold(fsp);
929 spin_unlock_irqrestore(lp->host->host_lock, flags);
931 if (!fc_fcp_lock_pkt(fsp)) {
932 fc_fcp_cleanup_cmd(fsp, error);
934 fc_fcp_unlock_pkt(fsp);
937 fc_fcp_pkt_release(fsp);
938 spin_lock_irqsave(lp->host->host_lock, flags);
940 * while we dropped the lock multiple pkts could
941 * have been released, so we have to start over.
945 spin_unlock_irqrestore(lp->host->host_lock, flags);
948 static void fc_fcp_abort_io(struct fc_lport *lp)
950 fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_HRD_ERROR);
954 * fc_fcp_pkt_send() - send a fcp packet to the lower level.
958 * This is called by upper layer protocol.
959 * Return : zero for success and -1 for failure
960 * Context : called from queuecommand which can be called from process
962 * Locks : called with the host lock and irqs disabled.
964 static int fc_fcp_pkt_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
966 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
969 fsp->cmd->SCp.ptr = (char *)fsp;
970 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
971 fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
973 int_to_scsilun(fsp->cmd->device->lun,
974 (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
975 memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
976 list_add_tail(&fsp->list, &si->scsi_pkt_queue);
978 spin_unlock_irq(lp->host->host_lock);
979 rc = lp->tt.fcp_cmd_send(lp, fsp, fc_fcp_recv);
980 spin_lock_irq(lp->host->host_lock);
982 list_del(&fsp->list);
987 static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
988 void (*resp)(struct fc_seq *,
994 struct fc_rport *rport;
995 struct fc_rport_libfc_priv *rp;
996 const size_t len = sizeof(fsp->cdb_cmd);
999 if (fc_fcp_lock_pkt(fsp))
1002 fp = fc_frame_alloc(lp, sizeof(fsp->cdb_cmd));
1008 memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1009 fr_cmd(fp) = fsp->cmd;
1011 fsp->max_payload = rport->maxframe_size;
1012 rp = rport->dd_data;
1014 fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1015 fc_host_port_id(rp->local_port->host), FC_TYPE_FCP,
1016 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1018 seq = lp->tt.exch_seq_send(lp, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1024 fsp->last_pkt_time = jiffies;
1026 fc_fcp_pkt_hold(fsp); /* hold for fc_fcp_pkt_destroy */
1028 setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1029 fc_fcp_timer_set(fsp,
1030 (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ?
1031 FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT);
1033 fc_fcp_unlock_pkt(fsp);
1038 * transport error handler
1040 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1042 int error = PTR_ERR(fp);
1044 if (fc_fcp_lock_pkt(fsp))
1049 fc_fcp_retry_cmd(fsp);
1052 FC_DBG("unknown error %ld\n", PTR_ERR(fp));
1055 * clear abort pending, because the lower layer
1056 * decided to force completion.
1058 fsp->state &= ~FC_SRB_ABORT_PENDING;
1059 fsp->status_code = FC_CMD_PLOGO;
1060 fc_fcp_complete_locked(fsp);
1062 fc_fcp_unlock_pkt(fsp);
1066 * Scsi abort handler- calls to send an abort
1067 * and then wait for abort completion
1069 static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
1073 if (fc_fcp_send_abort(fsp))
1076 init_completion(&fsp->tm_done);
1077 fsp->wait_for_comp = 1;
1079 spin_unlock_bh(&fsp->scsi_pkt_lock);
1080 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1081 spin_lock_bh(&fsp->scsi_pkt_lock);
1082 fsp->wait_for_comp = 0;
1085 FC_DBG("target abort cmd failed\n");
1087 } else if (fsp->state & FC_SRB_ABORTED) {
1088 FC_DBG("target abort cmd passed\n");
1090 fc_fcp_complete_locked(fsp);
1097 * Retry LUN reset after resource allocation failed.
1099 static void fc_lun_reset_send(unsigned long data)
1101 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1102 struct fc_lport *lp = fsp->lp;
1103 if (lp->tt.fcp_cmd_send(lp, fsp, fc_tm_done)) {
1104 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1106 if (fc_fcp_lock_pkt(fsp))
1108 setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1109 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1110 fc_fcp_unlock_pkt(fsp);
1115 * Scsi device reset handler- send a LUN RESET to the device
1116 * and wait for reset reply
1118 static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
1119 unsigned int id, unsigned int lun)
1123 fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1124 fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1125 int_to_scsilun(lun, (struct scsi_lun *)fsp->cdb_cmd.fc_lun);
1127 fsp->wait_for_comp = 1;
1128 init_completion(&fsp->tm_done);
1130 fc_lun_reset_send((unsigned long)fsp);
1133 * wait for completion of reset
1134 * after that make sure all commands are terminated
1136 rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1138 spin_lock_bh(&fsp->scsi_pkt_lock);
1139 fsp->state |= FC_SRB_COMPL;
1140 spin_unlock_bh(&fsp->scsi_pkt_lock);
1142 del_timer_sync(&fsp->timer);
1144 spin_lock_bh(&fsp->scsi_pkt_lock);
1146 lp->tt.exch_done(fsp->seq_ptr);
1147 fsp->seq_ptr = NULL;
1149 fsp->wait_for_comp = 0;
1150 spin_unlock_bh(&fsp->scsi_pkt_lock);
1153 FC_DBG("lun reset failed\n");
1157 /* cdb_status holds the tmf's rsp code */
1158 if (fsp->cdb_status != FCP_TMF_CMPL)
1161 FC_DBG("lun reset to lun %u completed\n", lun);
1162 fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED);
1167 * Task Managment response handler
1169 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1171 struct fc_fcp_pkt *fsp = arg;
1172 struct fc_frame_header *fh;
1176 * If there is an error just let it timeout or wait
1177 * for TMF to be aborted if it timedout.
1179 * scsi-eh will escalate for when either happens.
1184 if (fc_fcp_lock_pkt(fsp))
1188 * raced with eh timeout handler.
1190 if (!fsp->seq_ptr || !fsp->wait_for_comp) {
1191 spin_unlock_bh(&fsp->scsi_pkt_lock);
1195 fh = fc_frame_header_get(fp);
1196 if (fh->fh_type != FC_TYPE_BLS)
1197 fc_fcp_resp(fsp, fp);
1198 fsp->seq_ptr = NULL;
1199 fsp->lp->tt.exch_done(seq);
1201 fc_fcp_unlock_pkt(fsp);
1204 static void fc_fcp_cleanup(struct fc_lport *lp)
1206 fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_ERROR);
1210 * fc_fcp_timeout: called by OS timer function.
1212 * The timer has been inactivated and must be reactivated if desired
1213 * using fc_fcp_timer_set().
1217 * If REC is supported, just issue it, and return. The REC exchange will
1218 * complete or time out, and recovery can continue at that point.
1220 * Otherwise, if the response has been received without all the data,
1221 * it has been ER_TIMEOUT since the response was received.
1223 * If the response has not been received,
1224 * we see if data was received recently. If it has been, we continue waiting,
1225 * otherwise, we abort the command.
1227 static void fc_fcp_timeout(unsigned long data)
1229 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1230 struct fc_rport *rport = fsp->rport;
1231 struct fc_rport_libfc_priv *rp = rport->dd_data;
1233 if (fc_fcp_lock_pkt(fsp))
1236 if (fsp->cdb_cmd.fc_tm_flags)
1239 fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1241 if (rp->flags & FC_RP_FLAGS_REC_SUPPORTED)
1243 else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
1245 fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1246 else if (fsp->state & FC_SRB_RCV_STATUS)
1247 fc_fcp_complete_locked(fsp);
1249 fc_timeout_error(fsp);
1250 fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1252 fc_fcp_unlock_pkt(fsp);
1256 * Send a REC ELS request
1258 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1260 struct fc_lport *lp;
1261 struct fc_frame *fp;
1262 struct fc_rport *rport;
1263 struct fc_rport_libfc_priv *rp;
1267 rp = rport->dd_data;
1268 if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) {
1269 fsp->status_code = FC_HRD_ERROR;
1270 fsp->io_status = SUGGEST_RETRY << 24;
1271 fc_fcp_complete_locked(fsp);
1274 fp = fc_frame_alloc(lp, sizeof(struct fc_els_rec));
1278 fr_seq(fp) = fsp->seq_ptr;
1279 fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1280 fc_host_port_id(rp->local_port->host), FC_TYPE_ELS,
1281 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1282 if (lp->tt.elsct_send(lp, rport, fp, ELS_REC, fc_fcp_rec_resp,
1283 fsp, jiffies_to_msecs(FC_SCSI_REC_TOV))) {
1284 fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */
1289 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1290 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1292 fc_timeout_error(fsp);
1296 * Receive handler for REC ELS frame
1297 * if it is a reject then let the scsi layer to handle
1298 * the timeout. if it is a LS_ACC then if the io was not completed
1299 * then set the timeout and return otherwise complete the exchange
1300 * and tell the scsi layer to restart the I/O.
1302 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1304 struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1305 struct fc_els_rec_acc *recp;
1306 struct fc_els_ls_rjt *rjt;
1310 enum dma_data_direction data_dir;
1312 struct fc_rport_libfc_priv *rp;
1315 fc_fcp_rec_error(fsp, fp);
1319 if (fc_fcp_lock_pkt(fsp))
1322 fsp->recov_retry = 0;
1323 opcode = fc_frame_payload_op(fp);
1324 if (opcode == ELS_LS_RJT) {
1325 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1326 switch (rjt->er_reason) {
1328 FC_DEBUG_FCP("device %x unexpected REC reject "
1329 "reason %d expl %d\n",
1330 fsp->rport->port_id, rjt->er_reason,
1334 FC_DEBUG_FCP("device does not support REC\n");
1335 rp = fsp->rport->dd_data;
1337 * if we do not spport RECs or got some bogus
1338 * reason then resetup timer so we check for
1341 rp->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1342 fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
1347 * If no data transfer, the command frame got dropped
1348 * so we just retry. If data was transferred, we
1349 * lost the response but the target has no record,
1350 * so we abort and retry.
1352 if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1353 fsp->xfer_len == 0) {
1354 fc_fcp_retry_cmd(fsp);
1357 fc_timeout_error(fsp);
1360 } else if (opcode == ELS_LS_ACC) {
1361 if (fsp->state & FC_SRB_ABORTED)
1364 data_dir = fsp->cmd->sc_data_direction;
1365 recp = fc_frame_payload_get(fp, sizeof(*recp));
1366 offset = ntohl(recp->reca_fc4value);
1367 e_stat = ntohl(recp->reca_e_stat);
1369 if (e_stat & ESB_ST_COMPLETE) {
1372 * The exchange is complete.
1374 * For output, we must've lost the response.
1375 * For input, all data must've been sent.
1376 * We lost may have lost the response
1377 * (and a confirmation was requested) and maybe
1380 * If all data received, send SRR
1381 * asking for response. If partial data received,
1382 * or gaps, SRR requests data at start of gap.
1383 * Recovery via SRR relies on in-order-delivery.
1385 if (data_dir == DMA_TO_DEVICE) {
1386 r_ctl = FC_RCTL_DD_CMD_STATUS;
1387 } else if (fsp->xfer_contig_end == offset) {
1388 r_ctl = FC_RCTL_DD_CMD_STATUS;
1390 offset = fsp->xfer_contig_end;
1391 r_ctl = FC_RCTL_DD_SOL_DATA;
1393 fc_fcp_srr(fsp, r_ctl, offset);
1394 } else if (e_stat & ESB_ST_SEQ_INIT) {
1397 * The remote port has the initiative, so just
1398 * keep waiting for it to complete.
1400 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1404 * The exchange is incomplete, we have seq. initiative.
1405 * Lost response with requested confirmation,
1406 * lost confirmation, lost transfer ready or
1409 * For output, if not all data was received, ask
1410 * for transfer ready to be repeated.
1412 * If we received or sent all the data, send SRR to
1415 * If we lost a response, we may have lost some read
1418 r_ctl = FC_RCTL_DD_SOL_DATA;
1419 if (data_dir == DMA_TO_DEVICE) {
1420 r_ctl = FC_RCTL_DD_CMD_STATUS;
1421 if (offset < fsp->data_len)
1422 r_ctl = FC_RCTL_DD_DATA_DESC;
1423 } else if (offset == fsp->xfer_contig_end) {
1424 r_ctl = FC_RCTL_DD_CMD_STATUS;
1425 } else if (fsp->xfer_contig_end < offset) {
1426 offset = fsp->xfer_contig_end;
1428 fc_fcp_srr(fsp, r_ctl, offset);
1432 fc_fcp_unlock_pkt(fsp);
1434 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
1439 * Handle error response or timeout for REC exchange.
1441 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1443 int error = PTR_ERR(fp);
1445 if (fc_fcp_lock_pkt(fsp))
1450 fc_fcp_retry_cmd(fsp);
1454 FC_DBG("REC %p fid %x error unexpected error %d\n",
1455 fsp, fsp->rport->port_id, error);
1456 fsp->status_code = FC_CMD_PLOGO;
1459 case -FC_EX_TIMEOUT:
1461 * Assume REC or LS_ACC was lost.
1462 * The exchange manager will have aborted REC, so retry.
1464 FC_DBG("REC fid %x error error %d retry %d/%d\n",
1465 fsp->rport->port_id, error, fsp->recov_retry,
1466 FC_MAX_RECOV_RETRY);
1467 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1470 fc_timeout_error(fsp);
1473 fc_fcp_unlock_pkt(fsp);
1475 fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
1479 * Time out error routine:
1480 * abort's the I/O close the exchange and
1481 * send completion notification to scsi layer
1483 static void fc_timeout_error(struct fc_fcp_pkt *fsp)
1485 fsp->status_code = FC_CMD_TIME_OUT;
1486 fsp->cdb_status = 0;
1489 * if this fails then we let the scsi command timer fire and
1492 fc_fcp_send_abort(fsp);
1496 * Sequence retransmission request.
1497 * This is called after receiving status but insufficient data, or
1498 * when expecting status but the request has timed out.
1500 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1502 struct fc_lport *lp = fsp->lp;
1503 struct fc_rport *rport;
1504 struct fc_rport_libfc_priv *rp;
1505 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1507 struct fcp_srr *srr;
1508 struct fc_frame *fp;
1512 rp = rport->dd_data;
1513 cdb_op = fsp->cdb_cmd.fc_cdb[0];
1515 if (!(rp->flags & FC_RP_FLAGS_RETRY) || rp->rp_state != RPORT_ST_READY)
1516 goto retry; /* shouldn't happen */
1517 fp = fc_frame_alloc(lp, sizeof(*srr));
1521 srr = fc_frame_payload_get(fp, sizeof(*srr));
1522 memset(srr, 0, sizeof(*srr));
1523 srr->srr_op = ELS_SRR;
1524 srr->srr_ox_id = htons(ep->oxid);
1525 srr->srr_rx_id = htons(ep->rxid);
1526 srr->srr_r_ctl = r_ctl;
1527 srr->srr_rel_off = htonl(offset);
1529 fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1530 fc_host_port_id(rp->local_port->host), FC_TYPE_FCP,
1531 FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
1533 seq = lp->tt.exch_seq_send(lp, fp, fc_fcp_srr_resp, NULL,
1534 fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
1539 fsp->recov_seq = seq;
1540 fsp->xfer_len = offset;
1541 fsp->xfer_contig_end = offset;
1542 fsp->state &= ~FC_SRB_RCV_STATUS;
1543 fc_fcp_pkt_hold(fsp); /* hold for outstanding SRR */
1546 fc_fcp_retry_cmd(fsp);
1550 * Handle response from SRR.
1552 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1554 struct fc_fcp_pkt *fsp = arg;
1555 struct fc_frame_header *fh;
1558 fc_fcp_srr_error(fsp, fp);
1562 if (fc_fcp_lock_pkt(fsp))
1565 fh = fc_frame_header_get(fp);
1567 * BUG? fc_fcp_srr_error calls exch_done which would release
1568 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1569 * then fc_exch_timeout would be sending an abort. The exch_done
1570 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1571 * an abort response though.
1573 if (fh->fh_type == FC_TYPE_BLS) {
1574 fc_fcp_unlock_pkt(fsp);
1578 fsp->recov_seq = NULL;
1579 switch (fc_frame_payload_op(fp)) {
1581 fsp->recov_retry = 0;
1582 fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
1586 fc_timeout_error(fsp);
1589 fc_fcp_unlock_pkt(fsp);
1590 fsp->lp->tt.exch_done(seq);
1593 fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */
1596 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1598 if (fc_fcp_lock_pkt(fsp))
1600 fsp->lp->tt.exch_done(fsp->recov_seq);
1601 fsp->recov_seq = NULL;
1602 switch (PTR_ERR(fp)) {
1603 case -FC_EX_TIMEOUT:
1604 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1607 fc_timeout_error(fsp);
1609 case -FC_EX_CLOSED: /* e.g., link failure */
1612 fc_fcp_retry_cmd(fsp);
1615 fc_fcp_unlock_pkt(fsp);
1617 fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */
1620 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
1623 return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
1627 * fc_queuecommand - The queuecommand function of the scsi template
1628 * @cmd: struct scsi_cmnd to be executed
1629 * @done: Callback function to be called when cmd is completed
1631 * this is the i/o strategy routine, called by the scsi layer
1632 * this routine is called with holding the host_lock.
1634 int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
1636 struct fc_lport *lp;
1637 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1638 struct fc_fcp_pkt *fsp;
1639 struct fc_rport_libfc_priv *rp;
1642 struct fcoe_dev_stats *stats;
1644 lp = shost_priv(sc_cmd->device->host);
1646 rval = fc_remote_port_chkready(rport);
1648 sc_cmd->result = rval;
1653 if (!*(struct fc_remote_port **)rport->dd_data) {
1655 * rport is transitioning from blocked/deleted to
1658 sc_cmd->result = DID_IMM_RETRY << 16;
1663 rp = rport->dd_data;
1665 if (!fc_fcp_lport_queue_ready(lp)) {
1666 rc = SCSI_MLQUEUE_HOST_BUSY;
1670 fsp = fc_fcp_pkt_alloc(lp, GFP_ATOMIC);
1672 rc = SCSI_MLQUEUE_HOST_BUSY;
1677 * build the libfc request pkt
1679 fsp->cmd = sc_cmd; /* save the cmd */
1680 fsp->lp = lp; /* save the softc ptr */
1681 fsp->rport = rport; /* set the remote port ptr */
1682 sc_cmd->scsi_done = done;
1685 * set up the transfer length
1687 fsp->data_len = scsi_bufflen(sc_cmd);
1691 * setup the data direction
1693 stats = lp->dev_stats[smp_processor_id()];
1694 if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1695 fsp->req_flags = FC_SRB_READ;
1696 stats->InputRequests++;
1697 stats->InputMegabytes = fsp->data_len;
1698 } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1699 fsp->req_flags = FC_SRB_WRITE;
1700 stats->OutputRequests++;
1701 stats->OutputMegabytes = fsp->data_len;
1704 stats->ControlRequests++;
1707 fsp->tgt_flags = rp->flags;
1709 init_timer(&fsp->timer);
1710 fsp->timer.data = (unsigned long)fsp;
1713 * send it to the lower layer
1714 * if we get -1 return then put the request in the pending
1717 rval = fc_fcp_pkt_send(lp, fsp);
1719 fsp->state = FC_SRB_FREE;
1720 fc_fcp_pkt_release(fsp);
1721 rc = SCSI_MLQUEUE_HOST_BUSY;
1726 EXPORT_SYMBOL(fc_queuecommand);
1729 * fc_io_compl() - Handle responses for completed commands
1732 * Translates a error to a Linux SCSI error.
1734 * The fcp packet lock must be held when calling.
1736 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1738 struct fc_fcp_internal *si;
1739 struct scsi_cmnd *sc_cmd;
1740 struct fc_lport *lp;
1741 unsigned long flags;
1743 fsp->state |= FC_SRB_COMPL;
1744 if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1745 spin_unlock_bh(&fsp->scsi_pkt_lock);
1746 del_timer_sync(&fsp->timer);
1747 spin_lock_bh(&fsp->scsi_pkt_lock);
1751 si = fc_get_scsi_internal(lp);
1752 spin_lock_irqsave(lp->host->host_lock, flags);
1754 spin_unlock_irqrestore(lp->host->host_lock, flags);
1759 * if a command timed out while we had to try and throttle IO
1760 * and it is now getting cleaned up, then we are about to
1761 * try again so clear the throttled flag incase we get more
1764 if (si->throttled && fsp->state & FC_SRB_NOMEM)
1770 if (!sc_cmd->SCp.ptr) {
1771 spin_unlock_irqrestore(lp->host->host_lock, flags);
1775 CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1776 switch (fsp->status_code) {
1778 if (fsp->cdb_status == 0) {
1782 sc_cmd->result = DID_OK << 16;
1783 if (fsp->scsi_resid)
1784 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1785 } else if (fsp->cdb_status == QUEUE_FULL) {
1786 struct scsi_device *tmp_sdev;
1787 struct scsi_device *sdev = sc_cmd->device;
1789 shost_for_each_device(tmp_sdev, sdev->host) {
1790 if (tmp_sdev->id != sdev->id)
1793 if (tmp_sdev->queue_depth > 1) {
1794 scsi_track_queue_full(tmp_sdev,
1799 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1802 * transport level I/O was ok but scsi
1803 * has non zero status
1805 sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1809 sc_cmd->result = DID_ERROR << 16;
1811 case FC_DATA_UNDRUN:
1812 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1814 * scsi status is good but transport level
1817 sc_cmd->result = DID_OK << 16;
1820 * scsi got underrun, this is an error
1822 CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1823 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1826 case FC_DATA_OVRRUN:
1828 * overrun is an error
1830 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1832 case FC_CMD_ABORTED:
1833 sc_cmd->result = (DID_ABORT << 16) | fsp->io_status;
1835 case FC_CMD_TIME_OUT:
1836 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1839 sc_cmd->result = (DID_RESET << 16);
1842 sc_cmd->result = (DID_NO_CONNECT << 16);
1845 sc_cmd->result = (DID_ERROR << 16);
1849 list_del(&fsp->list);
1850 sc_cmd->SCp.ptr = NULL;
1851 sc_cmd->scsi_done(sc_cmd);
1852 spin_unlock_irqrestore(lp->host->host_lock, flags);
1854 /* release ref from initial allocation in queue command */
1855 fc_fcp_pkt_release(fsp);
1859 * fc_fcp_complete() - complete processing of a fcp packet
1862 * This function may sleep if a fsp timer is pending.
1863 * The host lock must not be held by caller.
1865 void fc_fcp_complete(struct fc_fcp_pkt *fsp)
1867 if (fc_fcp_lock_pkt(fsp))
1870 fc_fcp_complete_locked(fsp);
1871 fc_fcp_unlock_pkt(fsp);
1873 EXPORT_SYMBOL(fc_fcp_complete);
1876 * fc_eh_abort() - Abort a command
1877 * @sc_cmd: scsi command to abort
1879 * From scsi host template.
1880 * send ABTS to the target device and wait for the response
1881 * sc_cmd is the pointer to the command to be aborted.
1883 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
1885 struct fc_fcp_pkt *fsp;
1886 struct fc_lport *lp;
1888 unsigned long flags;
1890 lp = shost_priv(sc_cmd->device->host);
1891 if (lp->state != LPORT_ST_READY)
1893 else if (!lp->link_up)
1896 spin_lock_irqsave(lp->host->host_lock, flags);
1897 fsp = CMD_SP(sc_cmd);
1899 /* command completed while scsi eh was setting up */
1900 spin_unlock_irqrestore(lp->host->host_lock, flags);
1903 /* grab a ref so the fsp and sc_cmd cannot be relased from under us */
1904 fc_fcp_pkt_hold(fsp);
1905 spin_unlock_irqrestore(lp->host->host_lock, flags);
1907 if (fc_fcp_lock_pkt(fsp)) {
1908 /* completed while we were waiting for timer to be deleted */
1913 rc = fc_fcp_pkt_abort(lp, fsp);
1914 fc_fcp_unlock_pkt(fsp);
1917 fc_fcp_pkt_release(fsp);
1920 EXPORT_SYMBOL(fc_eh_abort);
1923 * fc_eh_device_reset() Reset a single LUN
1924 * @sc_cmd: scsi command
1926 * Set from scsi host template to send tm cmd to the target and wait for the
1929 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
1931 struct fc_lport *lp;
1932 struct fc_fcp_pkt *fsp;
1933 struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1935 struct fc_rport_libfc_priv *rp;
1938 rval = fc_remote_port_chkready(rport);
1942 rp = rport->dd_data;
1943 lp = shost_priv(sc_cmd->device->host);
1945 if (lp->state != LPORT_ST_READY)
1948 fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO);
1950 FC_DBG("could not allocate scsi_pkt\n");
1951 sc_cmd->result = DID_NO_CONNECT << 16;
1956 * Build the libfc request pkt. Do not set the scsi cmnd, because
1957 * the sc passed in is not setup for execution like when sent
1958 * through the queuecommand callout.
1960 fsp->lp = lp; /* save the softc ptr */
1961 fsp->rport = rport; /* set the remote port ptr */
1964 * flush outstanding commands
1966 rc = fc_lun_reset(lp, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
1967 fsp->state = FC_SRB_FREE;
1968 fc_fcp_pkt_release(fsp);
1973 EXPORT_SYMBOL(fc_eh_device_reset);
1976 * fc_eh_host_reset() - The reset function will reset the ports on the host.
1977 * @sc_cmd: scsi command
1979 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
1981 struct Scsi_Host *shost = sc_cmd->device->host;
1982 struct fc_lport *lp = shost_priv(shost);
1983 unsigned long wait_tmo;
1985 lp->tt.lport_reset(lp);
1986 wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
1987 while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo))
1990 if (fc_fcp_lport_queue_ready(lp)) {
1991 shost_printk(KERN_INFO, shost, "Host reset succeeded.\n");
1994 shost_printk(KERN_INFO, shost, "Host reset failed. "
1995 "lport not ready.\n");
1999 EXPORT_SYMBOL(fc_eh_host_reset);
2002 * fc_slave_alloc() - configure queue depth
2003 * @sdev: scsi device
2005 * Configures queue depth based on host's cmd_per_len. If not set
2006 * then we use the libfc default.
2008 int fc_slave_alloc(struct scsi_device *sdev)
2010 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2013 if (!rport || fc_remote_port_chkready(rport))
2016 if (sdev->tagged_supported) {
2017 if (sdev->host->hostt->cmd_per_lun)
2018 queue_depth = sdev->host->hostt->cmd_per_lun;
2020 queue_depth = FC_FCP_DFLT_QUEUE_DEPTH;
2021 scsi_activate_tcq(sdev, queue_depth);
2025 EXPORT_SYMBOL(fc_slave_alloc);
2027 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth)
2029 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2030 return sdev->queue_depth;
2032 EXPORT_SYMBOL(fc_change_queue_depth);
2034 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2036 if (sdev->tagged_supported) {
2037 scsi_set_tag_type(sdev, tag_type);
2039 scsi_activate_tcq(sdev, sdev->queue_depth);
2041 scsi_deactivate_tcq(sdev, sdev->queue_depth);
2047 EXPORT_SYMBOL(fc_change_queue_type);
2049 void fc_fcp_destroy(struct fc_lport *lp)
2051 struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
2053 if (!list_empty(&si->scsi_pkt_queue))
2054 printk(KERN_ERR "Leaked scsi packets.\n");
2056 mempool_destroy(si->scsi_pkt_pool);
2058 lp->scsi_priv = NULL;
2060 EXPORT_SYMBOL(fc_fcp_destroy);
2062 int fc_fcp_init(struct fc_lport *lp)
2065 struct fc_fcp_internal *si;
2067 if (!lp->tt.fcp_cmd_send)
2068 lp->tt.fcp_cmd_send = fc_fcp_cmd_send;
2070 if (!lp->tt.fcp_cleanup)
2071 lp->tt.fcp_cleanup = fc_fcp_cleanup;
2073 if (!lp->tt.fcp_abort_io)
2074 lp->tt.fcp_abort_io = fc_fcp_abort_io;
2076 si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2080 INIT_LIST_HEAD(&si->scsi_pkt_queue);
2082 si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2083 if (!si->scsi_pkt_pool) {
2093 EXPORT_SYMBOL(fc_fcp_init);
2095 static int __init libfc_init(void)
2099 scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2100 sizeof(struct fc_fcp_pkt),
2101 0, SLAB_HWCACHE_ALIGN, NULL);
2102 if (scsi_pkt_cachep == NULL) {
2103 FC_DBG("Unable to allocate SRB cache...module load failed!");
2107 rc = fc_setup_exch_mgr();
2109 goto destroy_pkt_cache;
2111 rc = fc_setup_rport();
2117 fc_destroy_exch_mgr();
2119 kmem_cache_destroy(scsi_pkt_cachep);
2123 static void __exit libfc_exit(void)
2125 kmem_cache_destroy(scsi_pkt_cachep);
2126 fc_destroy_exch_mgr();
2130 module_init(libfc_init);
2131 module_exit(libfc_exit);