git.oblomov.eu Git - linux-2.6/blob - drivers/media/video/zoran/zr36060.c

   1 /*
   2  * Zoran ZR36060 basic configuration functions
   3  *
   4  * Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be>
   5  *
   6  * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $
   7  *
   8  * ------------------------------------------------------------------------
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  *
  24  * ------------------------------------------------------------------------
  25  */
  26
  27 #define ZR060_VERSION "v0.7"
  28
  29 #include <linux/module.h>
  30 #include <linux/init.h>
  31 #include <linux/slab.h>
  32 #include <linux/delay.h>
  33
  34 #include <linux/types.h>
  35 #include <linux/wait.h>
  36
  37 /* I/O commands, error codes */
  38 #include <asm/io.h>
  39
  40 /* headerfile of this module */
  41 #include "zr36060.h"
  42
  43 /* codec io API */
  44 #include "videocodec.h"
  45
  46 /* it doesn't make sense to have more than 20 or so,
  47   just to prevent some unwanted loops */
  48 #define MAX_CODECS 20
  49
  50 /* amount of chips attached via this driver */
  51 static int zr36060_codecs;
  52
  53 static int low_bitrate;
  54 module_param(low_bitrate, bool, 0);
  55 MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate");
  56
  57 /* debugging is available via module parameter */
  58 static int debug;
  59 module_param(debug, int, 0);
  60 MODULE_PARM_DESC(debug, "Debug level (0-4)");
  61
  62 #define dprintk(num, format, args...) \
  63         do { \
  64                 if (debug >= num) \
  65                         printk(format, ##args); \
  66         } while (0)
  67
  68 /* =========================================================================
  69    Local hardware I/O functions:
  70
  71    read/write via codec layer (registers are located in the master device)
  72    ========================================================================= */
  73
  74 /* read and write functions */
  75 static u8
  76 zr36060_read (struct zr36060 *ptr,
  77               u16             reg)
  78 {
  79         u8 value = 0;
  80
  81         // just in case something is wrong...
  82         if (ptr->codec->master_data->readreg)
  83                 value = (ptr->codec->master_data->readreg(ptr->codec,
  84                                                           reg)) & 0xff;
  85         else
  86                 dprintk(1,
  87                         KERN_ERR "%s: invalid I/O setup, nothing read!\n",
  88                         ptr->name);
  89
  90         //dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value);
  91
  92         return value;
  93 }
  94
  95 static void
  96 zr36060_write(struct zr36060 *ptr,
  97               u16             reg,
  98               u8              value)
  99 {
 100         //dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg);
 101         dprintk(4, "0x%02x @0x%04x\n", value, reg);
 102
 103         // just in case something is wrong...
 104         if (ptr->codec->master_data->writereg)
 105                 ptr->codec->master_data->writereg(ptr->codec, reg, value);
 106         else
 107                 dprintk(1,
 108                         KERN_ERR
 109                         "%s: invalid I/O setup, nothing written!\n",
 110                         ptr->name);
 111 }
 112
 113 /* =========================================================================
 114    Local helper function:
 115
 116    status read
 117    ========================================================================= */
 118
 119 /* status is kept in datastructure */
 120 static u8
 121 zr36060_read_status (struct zr36060 *ptr)
 122 {
 123         ptr->status = zr36060_read(ptr, ZR060_CFSR);
 124
 125         zr36060_read(ptr, 0);
 126         return ptr->status;
 127 }
 128
 129 /* =========================================================================
 130    Local helper function:
 131
 132    scale factor read
 133    ========================================================================= */
 134
 135 /* scale factor is kept in datastructure */
 136 static u16
 137 zr36060_read_scalefactor (struct zr36060 *ptr)
 138 {
 139         ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) |
 140                          (zr36060_read(ptr, ZR060_SF_LO) & 0xFF);
 141
 142         /* leave 0 selected for an eventually GO from master */
 143         zr36060_read(ptr, 0);
 144         return ptr->scalefact;
 145 }
 146
 147 /* =========================================================================
 148    Local helper function:
 149
 150    wait if codec is ready to proceed (end of processing) or time is over
 151    ========================================================================= */
 152
 153 static void
 154 zr36060_wait_end (struct zr36060 *ptr)
 155 {
 156         int i = 0;
 157
 158         while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
 159                 udelay(1);
 160                 if (i++ > 200000) {     // 200ms, there is for sure something wrong!!!
 161                         dprintk(1,
 162                                 "%s: timeout at wait_end (last status: 0x%02x)\n",
 163                                 ptr->name, ptr->status);
 164                         break;
 165                 }
 166         }
 167 }
 168
 169 /* =========================================================================
 170    Local helper function:
 171
 172    basic test of "connectivity", writes/reads to/from memory the SOF marker
 173    ========================================================================= */
 174
 175 static int
 176 zr36060_basic_test (struct zr36060 *ptr)
 177 {
 178         if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) &&
 179             (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) {
 180                 dprintk(1,
 181                         KERN_ERR
 182                         "%s: attach failed, can't connect to jpeg processor!\n",
 183                         ptr->name);
 184                 return -ENXIO;
 185         }
 186
 187         zr36060_wait_end(ptr);
 188         if (ptr->status & ZR060_CFSR_Busy) {
 189                 dprintk(1,
 190                         KERN_ERR
 191                         "%s: attach failed, jpeg processor failed (end flag)!\n",
 192                         ptr->name);
 193                 return -EBUSY;
 194         }
 195
 196         return 0;               /* looks good! */
 197 }
 198
 199 /* =========================================================================
 200    Local helper function:
 201
 202    simple loop for pushing the init datasets
 203    ========================================================================= */
 204
 205 static int
 206 zr36060_pushit (struct zr36060 *ptr,
 207                 u16             startreg,
 208                 u16             len,
 209                 const char     *data)
 210 {
 211         int i = 0;
 212
 213         dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name,
 214                 startreg, len);
 215         while (i < len) {
 216                 zr36060_write(ptr, startreg++, data[i++]);
 217         }
 218
 219         return i;
 220 }
 221
 222 /* =========================================================================
 223    Basic datasets:
 224
 225    jpeg baseline setup data (you find it on lots places in internet, or just
 226    extract it from any regular .jpg image...)
 227
 228    Could be variable, but until it's not needed it they are just fixed to save
 229    memory. Otherwise expand zr36060 structure with arrays, push the values to
 230    it and initalize from there, as e.g. the linux zr36057/60 driver does it.
 231    ========================================================================= */
 232
 233 static const char zr36060_dqt[0x86] = {
 234         0xff, 0xdb,             //Marker: DQT
 235         0x00, 0x84,             //Length: 2*65+2
 236         0x00,                   //Pq,Tq first table
 237         0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
 238         0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
 239         0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
 240         0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
 241         0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
 242         0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
 243         0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
 244         0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
 245         0x01,                   //Pq,Tq second table
 246         0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
 247         0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
 248         0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
 249         0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
 250         0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
 251         0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
 252         0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
 253         0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63
 254 };
 255
 256 static const char zr36060_dht[0x1a4] = {
 257         0xff, 0xc4,             //Marker: DHT
 258         0x01, 0xa2,             //Length: 2*AC, 2*DC
 259         0x00,                   //DC first table
 260         0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
 261         0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
 262         0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
 263         0x01,                   //DC second table
 264         0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
 265         0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
 266         0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
 267         0x10,                   //AC first table
 268         0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03,
 269         0x05, 0x05, 0x04, 0x04, 0x00, 0x00,
 270         0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11,
 271         0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
 272         0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1,
 273         0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24,
 274         0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17,
 275         0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34,
 276         0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
 277         0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
 278         0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
 279         0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
 280         0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
 281         0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
 282         0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8,
 283         0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9,
 284         0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8,
 285         0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,
 286         0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
 287         0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
 288         0xF8, 0xF9, 0xFA,
 289         0x11,                   //AC second table
 290         0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
 291         0x07, 0x05, 0x04, 0x04, 0x00, 0x01,
 292         0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
 293         0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
 294         0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
 295         0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62,
 296         0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25,
 297         0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A,
 298         0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
 299         0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
 300         0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
 301         0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
 302         0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
 303         0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
 304         0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7,
 305         0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8,
 306         0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
 307         0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8,
 308         0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
 309         0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8,
 310         0xF9, 0xFA
 311 };
 312
 313 /* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */
 314 #define NO_OF_COMPONENTS          0x3   //Y,U,V
 315 #define BASELINE_PRECISION        0x8   //MCU size (?)
 316 static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 };   //table idx's QT
 317 static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 };   //table idx's DC
 318 static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 };   //table idx's AC
 319
 320 /* horizontal 422 decimation setup (maybe we support 411 or so later, too) */
 321 static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 };
 322 static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
 323
 324 /* =========================================================================
 325    Local helper functions:
 326
 327    calculation and setup of parameter-dependent JPEG baseline segments
 328    (needed for compression only)
 329    ========================================================================= */
 330
 331 /* ------------------------------------------------------------------------- */
 332
 333 /* SOF (start of frame) segment depends on width, height and sampling ratio
 334                          of each color component */
 335
 336 static int
 337 zr36060_set_sof (struct zr36060 *ptr)
 338 {
 339         char sof_data[34];      // max. size of register set
 340         int i;
 341
 342         dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name,
 343                 ptr->width, ptr->height, NO_OF_COMPONENTS);
 344         sof_data[0] = 0xff;
 345         sof_data[1] = 0xc0;
 346         sof_data[2] = 0x00;
 347         sof_data[3] = (3 * NO_OF_COMPONENTS) + 8;
 348         sof_data[4] = BASELINE_PRECISION;       // only '8' possible with zr36060
 349         sof_data[5] = (ptr->height) >> 8;
 350         sof_data[6] = (ptr->height) & 0xff;
 351         sof_data[7] = (ptr->width) >> 8;
 352         sof_data[8] = (ptr->width) & 0xff;
 353         sof_data[9] = NO_OF_COMPONENTS;
 354         for (i = 0; i < NO_OF_COMPONENTS; i++) {
 355                 sof_data[10 + (i * 3)] = i;     // index identifier
 356                 sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) |
 357                                          (ptr->v_samp_ratio[i]); // sampling ratios
 358                 sof_data[12 + (i * 3)] = zr36060_tq[i]; // Q table selection
 359         }
 360         return zr36060_pushit(ptr, ZR060_SOF_IDX,
 361                               (3 * NO_OF_COMPONENTS) + 10, sof_data);
 362 }
 363
 364 /* ------------------------------------------------------------------------- */
 365
 366 /* SOS (start of scan) segment depends on the used scan components
 367                         of each color component */
 368
 369 static int
 370 zr36060_set_sos (struct zr36060 *ptr)
 371 {
 372         char sos_data[16];      // max. size of register set
 373         int i;
 374
 375         dprintk(3, "%s: write SOS\n", ptr->name);
 376         sos_data[0] = 0xff;
 377         sos_data[1] = 0xda;
 378         sos_data[2] = 0x00;
 379         sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3;
 380         sos_data[4] = NO_OF_COMPONENTS;
 381         for (i = 0; i < NO_OF_COMPONENTS; i++) {
 382                 sos_data[5 + (i * 2)] = i;      // index
 383                 sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) |
 384                                         zr36060_ta[i]; // AC/DC tbl.sel.
 385         }
 386         sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00;      // scan start
 387         sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f;
 388         sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00;
 389         return zr36060_pushit(ptr, ZR060_SOS_IDX,
 390                               4 + 1 + (2 * NO_OF_COMPONENTS) + 3,
 391                               sos_data);
 392 }
 393
 394 /* ------------------------------------------------------------------------- */
 395
 396 /* DRI (define restart interval) */
 397
 398 static int
 399 zr36060_set_dri (struct zr36060 *ptr)
 400 {
 401         char dri_data[6];       // max. size of register set
 402
 403         dprintk(3, "%s: write DRI\n", ptr->name);
 404         dri_data[0] = 0xff;
 405         dri_data[1] = 0xdd;
 406         dri_data[2] = 0x00;
 407         dri_data[3] = 0x04;
 408         dri_data[4] = (ptr->dri) >> 8;
 409         dri_data[5] = (ptr->dri) & 0xff;
 410         return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data);
 411 }
 412
 413 /* =========================================================================
 414    Setup function:
 415
 416    Setup compression/decompression of Zoran's JPEG processor
 417    ( see also zoran 36060 manual )
 418
 419    ... sorry for the spaghetti code ...
 420    ========================================================================= */
 421 static void
 422 zr36060_init (struct zr36060 *ptr)
 423 {
 424         int sum = 0;
 425         long bitcnt, tmp;
 426
 427         if (ptr->mode == CODEC_DO_COMPRESSION) {
 428                 dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name);
 429
 430                 zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
 431
 432                 /* 060 communicates with 067 in master mode */
 433                 zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr);
 434
 435                 /* Compression with or without variable scale factor */
 436                 /*FIXME: What about ptr->bitrate_ctrl? */
 437                 zr36060_write(ptr, ZR060_CMR,
 438                               ZR060_CMR_Comp | ZR060_CMR_Pass2 |
 439                               ZR060_CMR_BRB);
 440
 441                 /* Must be zero */
 442                 zr36060_write(ptr, ZR060_MBZ, 0x00);
 443                 zr36060_write(ptr, ZR060_TCR_HI, 0x00);
 444                 zr36060_write(ptr, ZR060_TCR_LO, 0x00);
 445
 446                 /* Disable all IRQs - no DataErr means autoreset */
 447                 zr36060_write(ptr, ZR060_IMR, 0);
 448
 449                 /* volume control settings */
 450                 zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8);
 451                 zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff);
 452
 453                 zr36060_write(ptr, ZR060_AF_HI, 0xff);
 454                 zr36060_write(ptr, ZR060_AF_M, 0xff);
 455                 zr36060_write(ptr, ZR060_AF_LO, 0xff);
 456
 457                 /* setup the variable jpeg tables */
 458                 sum += zr36060_set_sof(ptr);
 459                 sum += zr36060_set_sos(ptr);
 460                 sum += zr36060_set_dri(ptr);
 461
 462                 /* setup the fixed jpeg tables - maybe variable, though -
 463                  * (see table init section above) */
 464                 sum +=
 465                     zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt),
 466                                    zr36060_dqt);
 467                 sum +=
 468                     zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht),
 469                                    zr36060_dht);
 470                 zr36060_write(ptr, ZR060_APP_IDX, 0xff);
 471                 zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn);
 472                 zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00);
 473                 zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2);
 474                 sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60,
 475                                       ptr->app.data) + 4;
 476                 zr36060_write(ptr, ZR060_COM_IDX, 0xff);
 477                 zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe);
 478                 zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00);
 479                 zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2);
 480                 sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60,
 481                                       ptr->com.data) + 4;
 482
 483                 /* setup misc. data for compression (target code sizes) */
 484
 485                 /* size of compressed code to reach without header data */
 486                 sum = ptr->real_code_vol - sum;
 487                 bitcnt = sum << 3;      /* need the size in bits */
 488
 489                 tmp = bitcnt >> 16;
 490                 dprintk(3,
 491                         "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n",
 492                         ptr->name, sum, ptr->real_code_vol, bitcnt, tmp);
 493                 zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8);
 494                 zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff);
 495                 tmp = bitcnt & 0xffff;
 496                 zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8);
 497                 zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff);
 498
 499                 bitcnt -= bitcnt >> 7;  // bits without stuffing
 500                 bitcnt -= ((bitcnt * 5) >> 6);  // bits without eob
 501
 502                 tmp = bitcnt >> 16;
 503                 dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n",
 504                         ptr->name, bitcnt, tmp);
 505                 zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8);
 506                 zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff);
 507                 tmp = bitcnt & 0xffff;
 508                 zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8);
 509                 zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff);
 510
 511                 /* JPEG markers to be included in the compressed stream */
 512                 zr36060_write(ptr, ZR060_MER,
 513                               ZR060_MER_DQT | ZR060_MER_DHT |
 514                               ((ptr->com.len > 0) ? ZR060_MER_Com : 0) |
 515                               ((ptr->app.len > 0) ? ZR060_MER_App : 0));
 516
 517                 /* Setup the Video Frontend */
 518                 /* Limit pixel range to 16..235 as per CCIR-601 */
 519                 zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range);
 520
 521         } else {
 522                 dprintk(2, "%s: EXPANSION SETUP\n", ptr->name);
 523
 524                 zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
 525
 526                 /* 060 communicates with 067 in master mode */
 527                 zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr);
 528
 529                 /* Decompression */
 530                 zr36060_write(ptr, ZR060_CMR, 0);
 531
 532                 /* Must be zero */
 533                 zr36060_write(ptr, ZR060_MBZ, 0x00);
 534                 zr36060_write(ptr, ZR060_TCR_HI, 0x00);
 535                 zr36060_write(ptr, ZR060_TCR_LO, 0x00);
 536
 537                 /* Disable all IRQs - no DataErr means autoreset */
 538                 zr36060_write(ptr, ZR060_IMR, 0);
 539
 540                 /* setup misc. data for expansion */
 541                 zr36060_write(ptr, ZR060_MER, 0);
 542
 543                 /* setup the fixed jpeg tables - maybe variable, though -
 544                  * (see table init section above) */
 545                 zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht),
 546                                zr36060_dht);
 547
 548                 /* Setup the Video Frontend */
 549                 //zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt);
 550                 //this doesn't seem right and doesn't work...
 551                 zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range);
 552         }
 553
 554         /* Load the tables */
 555         zr36060_write(ptr, ZR060_LOAD,
 556                       ZR060_LOAD_SyncRst | ZR060_LOAD_Load);
 557         zr36060_wait_end(ptr);
 558         dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name,
 559                 ptr->status);
 560
 561         if (ptr->status & ZR060_CFSR_Busy) {
 562                 dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name);
 563                 return;         // something is wrong, its timed out!!!!
 564         }
 565 }
 566
 567 /* =========================================================================
 568    CODEC API FUNCTIONS
 569
 570    this functions are accessed by the master via the API structure
 571    ========================================================================= */
 572
 573 /* set compression/expansion mode and launches codec -
 574    this should be the last call from the master before starting processing */
 575 static int
 576 zr36060_set_mode (struct videocodec *codec,
 577                   int                mode)
 578 {
 579         struct zr36060 *ptr = (struct zr36060 *) codec->data;
 580
 581         dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);
 582
 583         if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
 584                 return -EINVAL;
 585
 586         ptr->mode = mode;
 587         zr36060_init(ptr);
 588
 589         return 0;
 590 }
 591
 592 /* set picture size (norm is ignored as the codec doesn't know about it) */
 593 static int
 594 zr36060_set_video (struct videocodec   *codec,
 595                    struct tvnorm       *norm,
 596                    struct vfe_settings *cap,
 597                    struct vfe_polarity *pol)
 598 {
 599         struct zr36060 *ptr = (struct zr36060 *) codec->data;
 600         u32 reg;
 601         int size;
 602
 603         dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name,
 604                 cap->x, cap->y, cap->width, cap->height, cap->decimation);
 605
 606         /* if () return -EINVAL;
 607          * trust the master driver that it knows what it does - so
 608          * we allow invalid startx/y and norm for now ... */
 609         ptr->width = cap->width / (cap->decimation & 0xff);
 610         ptr->height = cap->height / (cap->decimation >> 8);
 611
 612         zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
 613
 614         /* Note that VSPol/HSPol bits in zr36060 have the opposite
 615          * meaning of their zr360x7 counterparts with the same names
 616          * N.b. for VSPol this is only true if FIVEdge = 0 (default,
 617          * left unchanged here - in accordance with datasheet).
 618         */
 619         reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0)
 620             | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0)
 621             | (pol->field_pol ? ZR060_VPR_FIPol : 0)
 622             | (pol->blank_pol ? ZR060_VPR_BLPol : 0)
 623             | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0)
 624             | (pol->poe_pol ? ZR060_VPR_PoePol : 0)
 625             | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0)
 626             | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0);
 627         zr36060_write(ptr, ZR060_VPR, reg);
 628
 629         reg = 0;
 630         switch (cap->decimation & 0xff) {
 631         default:
 632         case 1:
 633                 break;
 634
 635         case 2:
 636                 reg |= ZR060_SR_HScale2;
 637                 break;
 638
 639         case 4:
 640                 reg |= ZR060_SR_HScale4;
 641                 break;
 642         }
 643
 644         switch (cap->decimation >> 8) {
 645         default:
 646         case 1:
 647                 break;
 648
 649         case 2:
 650                 reg |= ZR060_SR_VScale;
 651                 break;
 652         }
 653         zr36060_write(ptr, ZR060_SR, reg);
 654
 655         zr36060_write(ptr, ZR060_BCR_Y, 0x00);
 656         zr36060_write(ptr, ZR060_BCR_U, 0x80);
 657         zr36060_write(ptr, ZR060_BCR_V, 0x80);
 658
 659         /* sync generator */
 660
 661         reg = norm->Ht - 1;     /* Vtotal */
 662         zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff);
 663         zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff);
 664
 665         reg = norm->Wt - 1;     /* Htotal */
 666         zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff);
 667         zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff);
 668
 669         reg = 6 - 1;            /* VsyncSize */
 670         zr36060_write(ptr, ZR060_SGR_VSYNC, reg);
 671
 672         //reg   = 30 - 1;               /* HsyncSize */
 673 ///*CP*/        reg = (zr->params.norm == 1 ? 57 : 68);
 674         reg = 68;
 675         zr36060_write(ptr, ZR060_SGR_HSYNC, reg);
 676
 677         reg = norm->VStart - 1; /* BVstart */
 678         zr36060_write(ptr, ZR060_SGR_BVSTART, reg);
 679
 680         reg += norm->Ha / 2;    /* BVend */
 681         zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff);
 682         zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff);
 683
 684         reg = norm->HStart - 1; /* BHstart */
 685         zr36060_write(ptr, ZR060_SGR_BHSTART, reg);
 686
 687         reg += norm->Wa;        /* BHend */
 688         zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff);
 689         zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff);
 690
 691         /* active area */
 692         reg = cap->y + norm->VStart;    /* Vstart */
 693         zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff);
 694         zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff);
 695
 696         reg += cap->height;     /* Vend */
 697         zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff);
 698         zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff);
 699
 700         reg = cap->x + norm->HStart;    /* Hstart */
 701         zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff);
 702         zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff);
 703
 704         reg += cap->width;      /* Hend */
 705         zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff);
 706         zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff);
 707
 708         /* subimage area */
 709         reg = norm->VStart - 4; /* SVstart */
 710         zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff);
 711         zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff);
 712
 713         reg += norm->Ha / 2 + 8;        /* SVend */
 714         zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff);
 715         zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff);
 716
 717         reg = norm->HStart /*+ 64 */  - 4;      /* SHstart */
 718         zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff);
 719         zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff);
 720
 721         reg += norm->Wa + 8;    /* SHend */
 722         zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff);
 723         zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff);
 724
 725         size = ptr->width * ptr->height;
 726         /* Target compressed field size in bits: */
 727         size = size * 16;       /* uncompressed size in bits */
 728         /* (Ronald) by default, quality = 100 is a compression
 729          * ratio 1:2. Setting low_bitrate (insmod option) sets
 730          * it to 1:4 (instead of 1:2, zr36060 max) as limit because the
 731          * buz can't handle more at decimation=1... Use low_bitrate if
 732          * you have a Buz, unless you know what you're doing */
 733         size = size * cap->quality / (low_bitrate ? 400 : 200);
 734         /* Lower limit (arbitrary, 1 KB) */
 735         if (size < 8192)
 736                 size = 8192;
 737         /* Upper limit: 7/8 of the code buffers */
 738         if (size > ptr->total_code_vol * 7)
 739                 size = ptr->total_code_vol * 7;
 740
 741         ptr->real_code_vol = size >> 3; /* in bytes */
 742
 743         /* the MBCVR is the *maximum* block volume, according to the
 744          * JPEG ISO specs, this shouldn't be used, since that allows
 745          * for the best encoding quality. So set it to it's max value */
 746         reg = ptr->max_block_vol;
 747         zr36060_write(ptr, ZR060_MBCVR, reg);
 748
 749         return 0;
 750 }
 751
 752 /* additional control functions */
 753 static int
 754 zr36060_control (struct videocodec *codec,
 755                  int                type,
 756                  int                size,
 757                  void              *data)
 758 {
 759         struct zr36060 *ptr = (struct zr36060 *) codec->data;
 760         int *ival = (int *) data;
 761
 762         dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
 763                 size);
 764
 765         switch (type) {
 766         case CODEC_G_STATUS:    /* get last status */
 767                 if (size != sizeof(int))
 768                         return -EFAULT;
 769                 zr36060_read_status(ptr);
 770                 *ival = ptr->status;
 771                 break;
 772
 773         case CODEC_G_CODEC_MODE:
 774                 if (size != sizeof(int))
 775                         return -EFAULT;
 776                 *ival = CODEC_MODE_BJPG;
 777                 break;
 778
 779         case CODEC_S_CODEC_MODE:
 780                 if (size != sizeof(int))
 781                         return -EFAULT;
 782                 if (*ival != CODEC_MODE_BJPG)
 783                         return -EINVAL;
 784                 /* not needed, do nothing */
 785                 return 0;
 786
 787         case CODEC_G_VFE:
 788         case CODEC_S_VFE:
 789                 /* not needed, do nothing */
 790                 return 0;
 791
 792         case CODEC_S_MMAP:
 793                 /* not available, give an error */
 794                 return -ENXIO;
 795
 796         case CODEC_G_JPEG_TDS_BYTE:     /* get target volume in byte */
 797                 if (size != sizeof(int))
 798                         return -EFAULT;
 799                 *ival = ptr->total_code_vol;
 800                 break;
 801
 802         case CODEC_S_JPEG_TDS_BYTE:     /* get target volume in byte */
 803                 if (size != sizeof(int))
 804                         return -EFAULT;
 805                 ptr->total_code_vol = *ival;
 806                 ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
 807                 break;
 808
 809         case CODEC_G_JPEG_SCALE:        /* get scaling factor */
 810                 if (size != sizeof(int))
 811                         return -EFAULT;
 812                 *ival = zr36060_read_scalefactor(ptr);
 813                 break;
 814
 815         case CODEC_S_JPEG_SCALE:        /* set scaling factor */
 816                 if (size != sizeof(int))
 817                         return -EFAULT;
 818                 ptr->scalefact = *ival;
 819                 break;
 820
 821         case CODEC_G_JPEG_APP_DATA: {   /* get appn marker data */
 822                 struct jpeg_app_marker *app = data;
 823
 824                 if (size != sizeof(struct jpeg_app_marker))
 825                         return -EFAULT;
 826
 827                 *app = ptr->app;
 828                 break;
 829         }
 830
 831         case CODEC_S_JPEG_APP_DATA: {   /* set appn marker data */
 832                 struct jpeg_app_marker *app = data;
 833
 834                 if (size != sizeof(struct jpeg_app_marker))
 835                         return -EFAULT;
 836
 837                 ptr->app = *app;
 838                 break;
 839         }
 840
 841         case CODEC_G_JPEG_COM_DATA: {   /* get comment marker data */
 842                 struct jpeg_com_marker *com = data;
 843
 844                 if (size != sizeof(struct jpeg_com_marker))
 845                         return -EFAULT;
 846
 847                 *com = ptr->com;
 848                 break;
 849         }
 850
 851         case CODEC_S_JPEG_COM_DATA: {   /* set comment marker data */
 852                 struct jpeg_com_marker *com = data;
 853
 854                 if (size != sizeof(struct jpeg_com_marker))
 855                         return -EFAULT;
 856
 857                 ptr->com = *com;
 858                 break;
 859         }
 860
 861         default:
 862                 return -EINVAL;
 863         }
 864
 865         return size;
 866 }
 867
 868 /* =========================================================================
 869    Exit and unregister function:
 870
 871    Deinitializes Zoran's JPEG processor
 872    ========================================================================= */
 873
 874 static int
 875 zr36060_unset (struct videocodec *codec)
 876 {
 877         struct zr36060 *ptr = codec->data;
 878
 879         if (ptr) {
 880                 /* do wee need some codec deinit here, too ???? */
 881
 882                 dprintk(1, "%s: finished codec #%d\n", ptr->name,
 883                         ptr->num);
 884                 kfree(ptr);
 885                 codec->data = NULL;
 886
 887                 zr36060_codecs--;
 888                 return 0;
 889         }
 890
 891         return -EFAULT;
 892 }
 893
 894 /* =========================================================================
 895    Setup and registry function:
 896
 897    Initializes Zoran's JPEG processor
 898
 899    Also sets pixel size, average code size, mode (compr./decompr.)
 900    (the given size is determined by the processor with the video interface)
 901    ========================================================================= */
 902
 903 static int
 904 zr36060_setup (struct videocodec *codec)
 905 {
 906         struct zr36060 *ptr;
 907         int res;
 908
 909         dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n",
 910                 zr36060_codecs);
 911
 912         if (zr36060_codecs == MAX_CODECS) {
 913                 dprintk(1,
 914                         KERN_ERR "zr36060: Can't attach more codecs!\n");
 915                 return -ENOSPC;
 916         }
 917         //mem structure init
 918         codec->data = ptr = kzalloc(sizeof(struct zr36060), GFP_KERNEL);
 919         if (NULL == ptr) {
 920                 dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n");
 921                 return -ENOMEM;
 922         }
 923
 924         snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]",
 925                  zr36060_codecs);
 926         ptr->num = zr36060_codecs++;
 927         ptr->codec = codec;
 928
 929         //testing
 930         res = zr36060_basic_test(ptr);
 931         if (res < 0) {
 932                 zr36060_unset(codec);
 933                 return res;
 934         }
 935         //final setup
 936         memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8);
 937         memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8);
 938
 939         ptr->bitrate_ctrl = 0;  /* 0 or 1 - fixed file size flag
 940                                  * (what is the difference?) */
 941         ptr->mode = CODEC_DO_COMPRESSION;
 942         ptr->width = 384;
 943         ptr->height = 288;
 944         ptr->total_code_vol = 16000;    /* CHECKME */
 945         ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
 946         ptr->max_block_vol = 240;       /* CHECKME, was 120 is 240 */
 947         ptr->scalefact = 0x100;
 948         ptr->dri = 1;           /* CHECKME, was 8 is 1 */
 949
 950         /* by default, no COM or APP markers - app should set those */
 951         ptr->com.len = 0;
 952         ptr->app.appn = 0;
 953         ptr->app.len = 0;
 954
 955         zr36060_init(ptr);
 956
 957         dprintk(1, KERN_INFO "%s: codec attached and running\n",
 958                 ptr->name);
 959
 960         return 0;
 961 }
 962
 963 static const struct videocodec zr36060_codec = {
 964         .owner = THIS_MODULE,
 965         .name = "zr36060",
 966         .magic = 0L,            // magic not used
 967         .flags =
 968             CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER |
 969             CODEC_FLAG_DECODER | CODEC_FLAG_VFE,
 970         .type = CODEC_TYPE_ZR36060,
 971         .setup = zr36060_setup, // functionality
 972         .unset = zr36060_unset,
 973         .set_mode = zr36060_set_mode,
 974         .set_video = zr36060_set_video,
 975         .control = zr36060_control,
 976         // others are not used
 977 };
 978
 979 /* =========================================================================
 980    HOOK IN DRIVER AS KERNEL MODULE
 981    ========================================================================= */
 982
 983 static int __init
 984 zr36060_init_module (void)
 985 {
 986         //dprintk(1, "zr36060 driver %s\n",ZR060_VERSION);
 987         zr36060_codecs = 0;
 988         return videocodec_register(&zr36060_codec);
 989 }
 990
 991 static void __exit
 992 zr36060_cleanup_module (void)
 993 {
 994         if (zr36060_codecs) {
 995                 dprintk(1,
 996                         "zr36060: something's wrong - %d codecs left somehow.\n",
 997                         zr36060_codecs);
 998         }
 999
1000         /* however, we can't just stay alive */
1001         videocodec_unregister(&zr36060_codec);
1002 }
1003
1004 module_init(zr36060_init_module);
1005 module_exit(zr36060_cleanup_module);
1006
1007 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@skynet.be>");
1008 MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors "
1009                    ZR060_VERSION);
1010 MODULE_LICENSE("GPL");