git.oblomov.eu Git - linux-2.6/blob - drivers/net/slip.c

   1 /*
   2  * slip.c       This module implements the SLIP protocol for kernel-based
   3  *              devices like TTY.  It interfaces between a raw TTY, and the
   4  *              kernel's INET protocol layers.
   5  *
   6  * Version:     @(#)slip.c      0.8.3   12/24/94
   7  *
   8  * Authors:     Laurence Culhane, <loz@holmes.demon.co.uk>
   9  *              Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
  10  *
  11  * Fixes:
  12  *              Alan Cox        :       Sanity checks and avoid tx overruns.
  13  *                                      Has a new sl->mtu field.
  14  *              Alan Cox        :       Found cause of overrun. ifconfig sl0 mtu upwards.
  15  *                                      Driver now spots this and grows/shrinks its buffers(hack!).
  16  *                                      Memory leak if you run out of memory setting up a slip driver fixed.
  17  *              Matt Dillon     :       Printable slip (borrowed from NET2E)
  18  *      Pauline Middelink       :       Slip driver fixes.
  19  *              Alan Cox        :       Honours the old SL_COMPRESSED flag
  20  *              Alan Cox        :       KISS AX.25 and AXUI IP support
  21  *              Michael Riepe   :       Automatic CSLIP recognition added
  22  *              Charles Hedrick :       CSLIP header length problem fix.
  23  *              Alan Cox        :       Corrected non-IP cases of the above.
  24  *              Alan Cox        :       Now uses hardware type as per FvK.
  25  *              Alan Cox        :       Default to 192.168.0.0 (RFC 1597)
  26  *              A.N.Kuznetsov   :       dev_tint() recursion fix.
  27  *      Dmitry Gorodchanin      :       SLIP memory leaks
  28  *      Dmitry Gorodchanin      :       Code cleanup. Reduce tty driver
  29  *                                      buffering from 4096 to 256 bytes.
  30  *                                      Improving SLIP response time.
  31  *                                      CONFIG_SLIP_MODE_SLIP6.
  32  *                                      ifconfig sl? up & down now works correctly.
  33  *                                      Modularization.
  34  *              Alan Cox        :       Oops - fix AX.25 buffer lengths
  35  *      Dmitry Gorodchanin      :       Even more cleanups. Preserve CSLIP
  36  *                                      statistics. Include CSLIP code only
  37  *                                      if it really needed.
  38  *              Alan Cox        :       Free slhc buffers in the right place.
  39  *              Alan Cox        :       Allow for digipeated IP over AX.25
  40  *              Matti Aarnio    :       Dynamic SLIP devices, with ideas taken
  41  *                                      from Jim Freeman's <jfree@caldera.com>
  42  *                                      dynamic PPP devices.  We do NOT kfree()
  43  *                                      device entries, just reg./unreg. them
  44  *                                      as they are needed.  We kfree() them
  45  *                                      at module cleanup.
  46  *                                      With MODULE-loading ``insmod'', user can
  47  *                                      issue parameter:   slip_maxdev=1024
  48  *                                      (Or how much he/she wants.. Default is 256)
  49  * *    Stanislav Voronyi       :       Slip line checking, with ideas taken
  50  *                                      from multislip BSDI driver which was written
  51  *                                      by Igor Chechik, RELCOM Corp. Only algorithms
  52  *                                      have been ported to Linux SLIP driver.
  53  *      Vitaly E. Lavrov        :       Sane behaviour on tty hangup.
  54  *      Alexey Kuznetsov        :       Cleanup interfaces to tty&netdevice modules.
  55  */
  56
  57 #define SL_CHECK_TRANSMIT
  58 #include <linux/module.h>
  59 #include <linux/moduleparam.h>
  60
  61 #include <asm/system.h>
  62 #include <asm/uaccess.h>
  63 #include <linux/bitops.h>
  64 #include <linux/string.h>
  65 #include <linux/mm.h>
  66 #include <linux/interrupt.h>
  67 #include <linux/in.h>
  68 #include <linux/tty.h>
  69 #include <linux/errno.h>
  70 #include <linux/netdevice.h>
  71 #include <linux/etherdevice.h>
  72 #include <linux/skbuff.h>
  73 #include <linux/rtnetlink.h>
  74 #include <linux/if_arp.h>
  75 #include <linux/if_slip.h>
  76 #include <linux/delay.h>
  77 #include <linux/init.h>
  78 #include "slip.h"
  79 #ifdef CONFIG_INET
  80 #include <linux/ip.h>
  81 #include <linux/tcp.h>
  82 #include <net/slhc_vj.h>
  83 #endif
  84
  85 #define SLIP_VERSION    "0.8.4-NET3.019-NEWTTY"
  86
  87 static struct net_device **slip_devs;
  88
  89 static int slip_maxdev = SL_NRUNIT;
  90 module_param(slip_maxdev, int, 0);
  91 MODULE_PARM_DESC(slip_maxdev, "Maximum number of slip devices");
  92
  93 static int slip_esc(unsigned char *p, unsigned char *d, int len);
  94 static void slip_unesc(struct slip *sl, unsigned char c);
  95 #ifdef CONFIG_SLIP_MODE_SLIP6
  96 static int slip_esc6(unsigned char *p, unsigned char *d, int len);
  97 static void slip_unesc6(struct slip *sl, unsigned char c);
  98 #endif
  99 #ifdef CONFIG_SLIP_SMART
 100 static void sl_keepalive(unsigned long sls);
 101 static void sl_outfill(unsigned long sls);
 102 static int sl_ioctl(struct net_device *dev,struct ifreq *rq,int cmd);
 103 #endif
 104
 105 /********************************
 106 *  Buffer administration routines:
 107 *       sl_alloc_bufs()
 108 *       sl_free_bufs()
 109 *       sl_realloc_bufs()
 110 *
 111 * NOTE: sl_realloc_bufs != sl_free_bufs + sl_alloc_bufs, because
 112 *       sl_realloc_bufs provides strong atomicity and reallocation
 113 *       on actively running device.
 114 *********************************/
 115
 116 /*
 117    Allocate channel buffers.
 118  */
 119
 120 static int
 121 sl_alloc_bufs(struct slip *sl, int mtu)
 122 {
 123         int err = -ENOBUFS;
 124         unsigned long len;
 125         char * rbuff = NULL;
 126         char * xbuff = NULL;
 127 #ifdef SL_INCLUDE_CSLIP
 128         char * cbuff = NULL;
 129         struct slcompress *slcomp = NULL;
 130 #endif
 131
 132         /*
 133          * Allocate the SLIP frame buffers:
 134          *
 135          * rbuff        Receive buffer.
 136          * xbuff        Transmit buffer.
 137          * cbuff        Temporary compression buffer.
 138          */
 139         len = mtu * 2;
 140
 141         /*
 142          * allow for arrival of larger UDP packets, even if we say not to
 143          * also fixes a bug in which SunOS sends 512-byte packets even with
 144          * an MSS of 128
 145          */
 146         if (len < 576 * 2)
 147                 len = 576 * 2;
 148         rbuff = kmalloc(len + 4, GFP_KERNEL);
 149         if (rbuff == NULL)
 150                 goto err_exit;
 151         xbuff = kmalloc(len + 4, GFP_KERNEL);
 152         if (xbuff == NULL)
 153                 goto err_exit;
 154 #ifdef SL_INCLUDE_CSLIP
 155         cbuff = kmalloc(len + 4, GFP_KERNEL);
 156         if (cbuff == NULL)
 157                 goto err_exit;
 158         slcomp = slhc_init(16, 16);
 159         if (slcomp == NULL)
 160                 goto err_exit;
 161 #endif
 162         spin_lock_bh(&sl->lock);
 163         if (sl->tty == NULL) {
 164                 spin_unlock_bh(&sl->lock);
 165                 err = -ENODEV;
 166                 goto err_exit;
 167         }
 168         sl->mtu      = mtu;
 169         sl->buffsize = len;
 170         sl->rcount   = 0;
 171         sl->xleft    = 0;
 172         rbuff = xchg(&sl->rbuff, rbuff);
 173         xbuff = xchg(&sl->xbuff, xbuff);
 174 #ifdef SL_INCLUDE_CSLIP
 175         cbuff = xchg(&sl->cbuff, cbuff);
 176         slcomp = xchg(&sl->slcomp, slcomp);
 177 #ifdef CONFIG_SLIP_MODE_SLIP6
 178         sl->xdata    = 0;
 179         sl->xbits    = 0;
 180 #endif
 181 #endif
 182         spin_unlock_bh(&sl->lock);
 183         err = 0;
 184
 185         /* Cleanup */
 186 err_exit:
 187 #ifdef SL_INCLUDE_CSLIP
 188         kfree(cbuff);
 189         if (slcomp)
 190                 slhc_free(slcomp);
 191 #endif
 192         kfree(xbuff);
 193         kfree(rbuff);
 194         return err;
 195 }
 196
 197 /* Free a SLIP channel buffers. */
 198 static void
 199 sl_free_bufs(struct slip *sl)
 200 {
 201         /* Free all SLIP frame buffers. */
 202         kfree(xchg(&sl->rbuff, NULL));
 203         kfree(xchg(&sl->xbuff, NULL));
 204 #ifdef SL_INCLUDE_CSLIP
 205         kfree(xchg(&sl->cbuff, NULL));
 206         slhc_free(xchg(&sl->slcomp, NULL));
 207 #endif
 208 }
 209
 210 /*
 211    Reallocate slip channel buffers.
 212  */
 213
 214 static int sl_realloc_bufs(struct slip *sl, int mtu)
 215 {
 216         int err = 0;
 217         struct net_device *dev = sl->dev;
 218         unsigned char *xbuff, *rbuff;
 219 #ifdef SL_INCLUDE_CSLIP
 220         unsigned char *cbuff;
 221 #endif
 222         int len = mtu * 2;
 223
 224 /*
 225  * allow for arrival of larger UDP packets, even if we say not to
 226  * also fixes a bug in which SunOS sends 512-byte packets even with
 227  * an MSS of 128
 228  */
 229         if (len < 576 * 2)
 230                 len = 576 * 2;
 231
 232         xbuff = kmalloc(len + 4, GFP_ATOMIC);
 233         rbuff = kmalloc(len + 4, GFP_ATOMIC);
 234 #ifdef SL_INCLUDE_CSLIP
 235         cbuff = kmalloc(len + 4, GFP_ATOMIC);
 236 #endif
 237
 238
 239 #ifdef SL_INCLUDE_CSLIP
 240         if (xbuff == NULL || rbuff == NULL || cbuff == NULL)  {
 241 #else
 242         if (xbuff == NULL || rbuff == NULL)  {
 243 #endif
 244                 if (mtu >= sl->mtu) {
 245                         printk(KERN_WARNING "%s: unable to grow slip buffers, MTU change cancelled.\n",
 246                                dev->name);
 247                         err = -ENOBUFS;
 248                 }
 249                 goto done;
 250         }
 251
 252         spin_lock_bh(&sl->lock);
 253
 254         err = -ENODEV;
 255         if (sl->tty == NULL)
 256                 goto done_on_bh;
 257
 258         xbuff    = xchg(&sl->xbuff, xbuff);
 259         rbuff    = xchg(&sl->rbuff, rbuff);
 260 #ifdef SL_INCLUDE_CSLIP
 261         cbuff    = xchg(&sl->cbuff, cbuff);
 262 #endif
 263         if (sl->xleft)  {
 264                 if (sl->xleft <= len)  {
 265                         memcpy(sl->xbuff, sl->xhead, sl->xleft);
 266                 } else  {
 267                         sl->xleft = 0;
 268                         sl->tx_dropped++;
 269                 }
 270         }
 271         sl->xhead = sl->xbuff;
 272
 273         if (sl->rcount)  {
 274                 if (sl->rcount <= len) {
 275                         memcpy(sl->rbuff, rbuff, sl->rcount);
 276                 } else  {
 277                         sl->rcount = 0;
 278                         sl->rx_over_errors++;
 279                         set_bit(SLF_ERROR, &sl->flags);
 280                 }
 281         }
 282         sl->mtu      = mtu;
 283         dev->mtu      = mtu;
 284         sl->buffsize = len;
 285         err = 0;
 286
 287 done_on_bh:
 288         spin_unlock_bh(&sl->lock);
 289
 290 done:
 291         kfree(xbuff);
 292         kfree(rbuff);
 293 #ifdef SL_INCLUDE_CSLIP
 294         kfree(cbuff);
 295 #endif
 296         return err;
 297 }
 298
 299
 300 /* Set the "sending" flag.  This must be atomic hence the set_bit. */
 301 static inline void
 302 sl_lock(struct slip *sl)
 303 {
 304         netif_stop_queue(sl->dev);
 305 }
 306
 307
 308 /* Clear the "sending" flag.  This must be atomic, hence the ASM. */
 309 static inline void
 310 sl_unlock(struct slip *sl)
 311 {
 312         netif_wake_queue(sl->dev);
 313 }
 314
 315 /* Send one completely decapsulated IP datagram to the IP layer. */
 316 static void
 317 sl_bump(struct slip *sl)
 318 {
 319         struct sk_buff *skb;
 320         int count;
 321
 322         count = sl->rcount;
 323 #ifdef SL_INCLUDE_CSLIP
 324         if (sl->mode & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) {
 325                 unsigned char c;
 326                 if ((c = sl->rbuff[0]) & SL_TYPE_COMPRESSED_TCP) {
 327                         /* ignore compressed packets when CSLIP is off */
 328                         if (!(sl->mode & SL_MODE_CSLIP)) {
 329                                 printk(KERN_WARNING "%s: compressed packet ignored\n", sl->dev->name);
 330                                 return;
 331                         }
 332                         /* make sure we've reserved enough space for uncompress to use */
 333                         if (count + 80 > sl->buffsize) {
 334                                 sl->rx_over_errors++;
 335                                 return;
 336                         }
 337                         count = slhc_uncompress(sl->slcomp, sl->rbuff, count);
 338                         if (count <= 0) {
 339                                 return;
 340                         }
 341                 } else if (c >= SL_TYPE_UNCOMPRESSED_TCP) {
 342                         if (!(sl->mode & SL_MODE_CSLIP)) {
 343                                 /* turn on header compression */
 344                                 sl->mode |= SL_MODE_CSLIP;
 345                                 sl->mode &= ~SL_MODE_ADAPTIVE;
 346                                 printk(KERN_INFO "%s: header compression turned on\n", sl->dev->name);
 347                         }
 348                         sl->rbuff[0] &= 0x4f;
 349                         if (slhc_remember(sl->slcomp, sl->rbuff, count) <= 0) {
 350                                 return;
 351                         }
 352                 }
 353         }
 354 #endif  /* SL_INCLUDE_CSLIP */
 355
 356         sl->rx_bytes+=count;
 357
 358         skb = dev_alloc_skb(count);
 359         if (skb == NULL)  {
 360                 printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", sl->dev->name);
 361                 sl->rx_dropped++;
 362                 return;
 363         }
 364         skb->dev = sl->dev;
 365         memcpy(skb_put(skb,count), sl->rbuff, count);
 366         skb->mac.raw=skb->data;
 367         skb->protocol=htons(ETH_P_IP);
 368         netif_rx(skb);
 369         sl->dev->last_rx = jiffies;
 370         sl->rx_packets++;
 371 }
 372
 373 /* Encapsulate one IP datagram and stuff into a TTY queue. */
 374 static void
 375 sl_encaps(struct slip *sl, unsigned char *icp, int len)
 376 {
 377         unsigned char *p;
 378         int actual, count;
 379
 380         if (len > sl->mtu) {            /* Sigh, shouldn't occur BUT ... */
 381                 printk(KERN_WARNING "%s: truncating oversized transmit packet!\n", sl->dev->name);
 382                 sl->tx_dropped++;
 383                 sl_unlock(sl);
 384                 return;
 385         }
 386
 387         p = icp;
 388 #ifdef SL_INCLUDE_CSLIP
 389         if (sl->mode & SL_MODE_CSLIP)  {
 390                 len = slhc_compress(sl->slcomp, p, len, sl->cbuff, &p, 1);
 391         }
 392 #endif
 393 #ifdef CONFIG_SLIP_MODE_SLIP6
 394         if(sl->mode & SL_MODE_SLIP6)
 395                 count = slip_esc6(p, (unsigned char *) sl->xbuff, len);
 396         else
 397 #endif
 398                 count = slip_esc(p, (unsigned char *) sl->xbuff, len);
 399
 400         /* Order of next two lines is *very* important.
 401          * When we are sending a little amount of data,
 402          * the transfer may be completed inside driver.write()
 403          * routine, because it's running with interrupts enabled.
 404          * In this case we *never* got WRITE_WAKEUP event,
 405          * if we did not request it before write operation.
 406          *       14 Oct 1994  Dmitry Gorodchanin.
 407          */
 408         sl->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
 409         actual = sl->tty->driver->write(sl->tty, sl->xbuff, count);
 410 #ifdef SL_CHECK_TRANSMIT
 411         sl->dev->trans_start = jiffies;
 412 #endif
 413         sl->xleft = count - actual;
 414         sl->xhead = sl->xbuff + actual;
 415 #ifdef CONFIG_SLIP_SMART
 416         /* VSV */
 417         clear_bit(SLF_OUTWAIT, &sl->flags);     /* reset outfill flag */
 418 #endif
 419 }
 420
 421 /*
 422  * Called by the driver when there's room for more data.  If we have
 423  * more packets to send, we send them here.
 424  */
 425 static void slip_write_wakeup(struct tty_struct *tty)
 426 {
 427         int actual;
 428         struct slip *sl = (struct slip *) tty->disc_data;
 429
 430         /* First make sure we're connected. */
 431         if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) {
 432                 return;
 433         }
 434         if (sl->xleft <= 0)  {
 435                 /* Now serial buffer is almost free & we can start
 436                  * transmission of another packet */
 437                 sl->tx_packets++;
 438                 tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
 439                 sl_unlock(sl);
 440                 return;
 441         }
 442
 443         actual = tty->driver->write(tty, sl->xhead, sl->xleft);
 444         sl->xleft -= actual;
 445         sl->xhead += actual;
 446 }
 447
 448 static void sl_tx_timeout(struct net_device *dev)
 449 {
 450         struct slip *sl = netdev_priv(dev);
 451
 452         spin_lock(&sl->lock);
 453
 454         if (netif_queue_stopped(dev)) {
 455                 if (!netif_running(dev))
 456                         goto out;
 457
 458                 /* May be we must check transmitter timeout here ?
 459                  *      14 Oct 1994 Dmitry Gorodchanin.
 460                  */
 461 #ifdef SL_CHECK_TRANSMIT
 462                 if (time_before(jiffies, dev->trans_start + 20 * HZ))  {
 463                         /* 20 sec timeout not reached */
 464                         goto out;
 465                 }
 466                 printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
 467                        (sl->tty->driver->chars_in_buffer(sl->tty) || sl->xleft) ?
 468                        "bad line quality" : "driver error");
 469                 sl->xleft = 0;
 470                 sl->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
 471                 sl_unlock(sl);
 472 #endif
 473         }
 474
 475 out:
 476         spin_unlock(&sl->lock);
 477 }
 478
 479
 480 /* Encapsulate an IP datagram and kick it into a TTY queue. */
 481 static int
 482 sl_xmit(struct sk_buff *skb, struct net_device *dev)
 483 {
 484         struct slip *sl = netdev_priv(dev);
 485
 486         spin_lock(&sl->lock);
 487         if (!netif_running(dev))  {
 488                 spin_unlock(&sl->lock);
 489                 printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
 490                 dev_kfree_skb(skb);
 491                 return 0;
 492         }
 493         if (sl->tty == NULL) {
 494                 spin_unlock(&sl->lock);
 495                 dev_kfree_skb(skb);
 496                 return 0;
 497         }
 498
 499         sl_lock(sl);
 500         sl->tx_bytes+=skb->len;
 501         sl_encaps(sl, skb->data, skb->len);
 502         spin_unlock(&sl->lock);
 503
 504         dev_kfree_skb(skb);
 505         return 0;
 506 }
 507
 508
 509 /******************************************
 510  *   Routines looking at netdevice side.
 511  ******************************************/
 512
 513 /* Netdevice UP -> DOWN routine */
 514
 515 static int
 516 sl_close(struct net_device *dev)
 517 {
 518         struct slip *sl = netdev_priv(dev);
 519
 520         spin_lock_bh(&sl->lock);
 521         if (sl->tty) {
 522                 /* TTY discipline is running. */
 523                 sl->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
 524         }
 525         netif_stop_queue(dev);
 526         sl->rcount   = 0;
 527         sl->xleft    = 0;
 528         spin_unlock_bh(&sl->lock);
 529
 530         return 0;
 531 }
 532
 533 /* Netdevice DOWN -> UP routine */
 534
 535 static int sl_open(struct net_device *dev)
 536 {
 537         struct slip *sl = netdev_priv(dev);
 538
 539         if (sl->tty==NULL)
 540                 return -ENODEV;
 541
 542         sl->flags &= (1 << SLF_INUSE);
 543         netif_start_queue(dev);
 544         return 0;
 545 }
 546
 547 /* Netdevice change MTU request */
 548
 549 static int sl_change_mtu(struct net_device *dev, int new_mtu)
 550 {
 551         struct slip *sl = netdev_priv(dev);
 552
 553         if (new_mtu < 68 || new_mtu > 65534)
 554                 return -EINVAL;
 555
 556         if (new_mtu != dev->mtu)
 557                 return sl_realloc_bufs(sl, new_mtu);
 558         return 0;
 559 }
 560
 561 /* Netdevice get statistics request */
 562
 563 static struct net_device_stats *
 564 sl_get_stats(struct net_device *dev)
 565 {
 566         static struct net_device_stats stats;
 567         struct slip *sl = netdev_priv(dev);
 568 #ifdef SL_INCLUDE_CSLIP
 569         struct slcompress *comp;
 570 #endif
 571
 572         memset(&stats, 0, sizeof(struct net_device_stats));
 573
 574         stats.rx_packets     = sl->rx_packets;
 575         stats.tx_packets     = sl->tx_packets;
 576         stats.rx_bytes       = sl->rx_bytes;
 577         stats.tx_bytes       = sl->tx_bytes;
 578         stats.rx_dropped     = sl->rx_dropped;
 579         stats.tx_dropped     = sl->tx_dropped;
 580         stats.tx_errors      = sl->tx_errors;
 581         stats.rx_errors      = sl->rx_errors;
 582         stats.rx_over_errors = sl->rx_over_errors;
 583 #ifdef SL_INCLUDE_CSLIP
 584         stats.rx_fifo_errors = sl->rx_compressed;
 585         stats.tx_fifo_errors = sl->tx_compressed;
 586         stats.collisions     = sl->tx_misses;
 587         comp = sl->slcomp;
 588         if (comp) {
 589                 stats.rx_fifo_errors += comp->sls_i_compressed;
 590                 stats.rx_dropped     += comp->sls_i_tossed;
 591                 stats.tx_fifo_errors += comp->sls_o_compressed;
 592                 stats.collisions     += comp->sls_o_misses;
 593         }
 594 #endif /* CONFIG_INET */
 595         return (&stats);
 596 }
 597
 598 /* Netdevice register callback */
 599
 600 static int sl_init(struct net_device *dev)
 601 {
 602         struct slip *sl = netdev_priv(dev);
 603
 604         /*
 605          *      Finish setting up the DEVICE info.
 606          */
 607
 608         dev->mtu                = sl->mtu;
 609         dev->type               = ARPHRD_SLIP + sl->mode;
 610 #ifdef SL_CHECK_TRANSMIT
 611         dev->tx_timeout         = sl_tx_timeout;
 612         dev->watchdog_timeo     = 20*HZ;
 613 #endif
 614         return 0;
 615 }
 616
 617
 618 static void sl_uninit(struct net_device *dev)
 619 {
 620         struct slip *sl = netdev_priv(dev);
 621
 622         sl_free_bufs(sl);
 623 }
 624
 625 static void sl_setup(struct net_device *dev)
 626 {
 627         dev->init               = sl_init;
 628         dev->uninit             = sl_uninit;
 629         dev->open               = sl_open;
 630         dev->destructor         = free_netdev;
 631         dev->stop               = sl_close;
 632         dev->get_stats          = sl_get_stats;
 633         dev->change_mtu         = sl_change_mtu;
 634         dev->hard_start_xmit    = sl_xmit;
 635 #ifdef CONFIG_SLIP_SMART
 636         dev->do_ioctl           = sl_ioctl;
 637 #endif
 638         dev->hard_header_len    = 0;
 639         dev->addr_len           = 0;
 640         dev->tx_queue_len       = 10;
 641
 642         SET_MODULE_OWNER(dev);
 643
 644         /* New-style flags. */
 645         dev->flags              = IFF_NOARP|IFF_POINTOPOINT|IFF_MULTICAST;
 646 }
 647
 648 /******************************************
 649   Routines looking at TTY side.
 650  ******************************************/
 651
 652
 653 /*
 654  * Handle the 'receiver data ready' interrupt.
 655  * This function is called by the 'tty_io' module in the kernel when
 656  * a block of SLIP data has been received, which can now be decapsulated
 657  * and sent on to some IP layer for further processing. This will not
 658  * be re-entered while running but other ldisc functions may be called
 659  * in parallel
 660  */
 661
 662 static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
 663 {
 664         struct slip *sl = (struct slip *) tty->disc_data;
 665
 666         if (!sl || sl->magic != SLIP_MAGIC ||
 667             !netif_running(sl->dev))
 668                 return;
 669
 670         /* Read the characters out of the buffer */
 671         while (count--) {
 672                 if (fp && *fp++) {
 673                         if (!test_and_set_bit(SLF_ERROR, &sl->flags))  {
 674                                 sl->rx_errors++;
 675                         }
 676                         cp++;
 677                         continue;
 678                 }
 679 #ifdef CONFIG_SLIP_MODE_SLIP6
 680                 if (sl->mode & SL_MODE_SLIP6)
 681                         slip_unesc6(sl, *cp++);
 682                 else
 683 #endif
 684                         slip_unesc(sl, *cp++);
 685         }
 686 }
 687
 688 /************************************
 689  *  slip_open helper routines.
 690  ************************************/
 691
 692 /* Collect hanged up channels */
 693
 694 static void sl_sync(void)
 695 {
 696         int i;
 697         struct net_device *dev;
 698         struct slip       *sl;
 699
 700         for (i = 0; i < slip_maxdev; i++) {
 701                 if ((dev = slip_devs[i]) == NULL)
 702                         break;
 703
 704                 sl = netdev_priv(dev);
 705                 if (sl->tty || sl->leased)
 706                         continue;
 707                 if (dev->flags&IFF_UP)
 708                         dev_close(dev);
 709         }
 710 }
 711
 712
 713 /* Find a free SLIP channel, and link in this `tty' line. */
 714 static struct slip *
 715 sl_alloc(dev_t line)
 716 {
 717         int i;
 718         int sel = -1;
 719         int score = -1;
 720         struct net_device *dev = NULL;
 721         struct slip       *sl;
 722
 723         if (slip_devs == NULL)
 724                 return NULL;    /* Master array missing ! */
 725
 726         for (i = 0; i < slip_maxdev; i++) {
 727                 dev = slip_devs[i];
 728                 if (dev == NULL)
 729                         break;
 730
 731                 sl = netdev_priv(dev);
 732                 if (sl->leased) {
 733                         if (sl->line != line)
 734                                 continue;
 735                         if (sl->tty)
 736                                 return NULL;
 737
 738                         /* Clear ESCAPE & ERROR flags */
 739                         sl->flags &= (1 << SLF_INUSE);
 740                         return sl;
 741                 }
 742
 743                 if (sl->tty)
 744                         continue;
 745
 746                 if (current->pid == sl->pid) {
 747                         if (sl->line == line && score < 3) {
 748                                 sel = i;
 749                                 score = 3;
 750                                 continue;
 751                         }
 752                         if (score < 2) {
 753                                 sel = i;
 754                                 score = 2;
 755                         }
 756                         continue;
 757                 }
 758                 if (sl->line == line && score < 1) {
 759                         sel = i;
 760                         score = 1;
 761                         continue;
 762                 }
 763                 if (score < 0) {
 764                         sel = i;
 765                         score = 0;
 766                 }
 767         }
 768
 769         if (sel >= 0) {
 770                 i = sel;
 771                 dev = slip_devs[i];
 772                 if (score > 1) {
 773                         sl = netdev_priv(dev);
 774                         sl->flags &= (1 << SLF_INUSE);
 775                         return sl;
 776                 }
 777         }
 778
 779         /* Sorry, too many, all slots in use */
 780         if (i >= slip_maxdev)
 781                 return NULL;
 782
 783         if (dev) {
 784                 sl = netdev_priv(dev);
 785                 if (test_bit(SLF_INUSE, &sl->flags)) {
 786                         unregister_netdevice(dev);
 787                         dev = NULL;
 788                         slip_devs[i] = NULL;
 789                 }
 790         }
 791
 792         if (!dev) {
 793                 char name[IFNAMSIZ];
 794                 sprintf(name, "sl%d", i);
 795
 796                 dev = alloc_netdev(sizeof(*sl), name, sl_setup);
 797                 if (!dev)
 798                         return NULL;
 799                 dev->base_addr  = i;
 800         }
 801
 802         sl = netdev_priv(dev);
 803
 804         /* Initialize channel control data */
 805         sl->magic       = SLIP_MAGIC;
 806         sl->dev         = dev;
 807         spin_lock_init(&sl->lock);
 808         sl->mode        = SL_MODE_DEFAULT;
 809 #ifdef CONFIG_SLIP_SMART
 810         init_timer(&sl->keepalive_timer);       /* initialize timer_list struct */
 811         sl->keepalive_timer.data=(unsigned long)sl;
 812         sl->keepalive_timer.function=sl_keepalive;
 813         init_timer(&sl->outfill_timer);
 814         sl->outfill_timer.data=(unsigned long)sl;
 815         sl->outfill_timer.function=sl_outfill;
 816 #endif
 817         slip_devs[i] = dev;
 818
 819         return sl;
 820 }
 821
 822 /*
 823  * Open the high-level part of the SLIP channel.
 824  * This function is called by the TTY module when the
 825  * SLIP line discipline is called for.  Because we are
 826  * sure the tty line exists, we only have to link it to
 827  * a free SLIP channel...
 828  *
 829  * Called in process context serialized from other ldisc calls.
 830  */
 831
 832 static int slip_open(struct tty_struct *tty)
 833 {
 834         struct slip *sl;
 835         int err;
 836
 837         if(!capable(CAP_NET_ADMIN))
 838                 return -EPERM;
 839
 840         /* RTnetlink lock is misused here to serialize concurrent
 841            opens of slip channels. There are better ways, but it is
 842            the simplest one.
 843          */
 844         rtnl_lock();
 845
 846         /* Collect hanged up channels. */
 847         sl_sync();
 848
 849         sl = (struct slip *) tty->disc_data;
 850
 851         err = -EEXIST;
 852         /* First make sure we're not already connected. */
 853         if (sl && sl->magic == SLIP_MAGIC)
 854                 goto err_exit;
 855
 856         /* OK.  Find a free SLIP channel to use. */
 857         err = -ENFILE;
 858         if ((sl = sl_alloc(tty_devnum(tty))) == NULL)
 859                 goto err_exit;
 860
 861         sl->tty = tty;
 862         tty->disc_data = sl;
 863         sl->line = tty_devnum(tty);
 864         sl->pid = current->pid;
 865
 866         if (!test_bit(SLF_INUSE, &sl->flags)) {
 867                 /* Perform the low-level SLIP initialization. */
 868                 if ((err = sl_alloc_bufs(sl, SL_MTU)) != 0)
 869                         goto err_free_chan;
 870
 871                 set_bit(SLF_INUSE, &sl->flags);
 872
 873                 if ((err = register_netdevice(sl->dev)))
 874                         goto err_free_bufs;
 875         }
 876
 877 #ifdef CONFIG_SLIP_SMART
 878         if (sl->keepalive) {
 879                 sl->keepalive_timer.expires=jiffies+sl->keepalive*HZ;
 880                 add_timer (&sl->keepalive_timer);
 881         }
 882         if (sl->outfill) {
 883                 sl->outfill_timer.expires=jiffies+sl->outfill*HZ;
 884                 add_timer (&sl->outfill_timer);
 885         }
 886 #endif
 887
 888         /* Done.  We have linked the TTY line to a channel. */
 889         rtnl_unlock();
 890         tty->receive_room = 65536;      /* We don't flow control */
 891         return sl->dev->base_addr;
 892
 893 err_free_bufs:
 894         sl_free_bufs(sl);
 895
 896 err_free_chan:
 897         sl->tty = NULL;
 898         tty->disc_data = NULL;
 899         clear_bit(SLF_INUSE, &sl->flags);
 900
 901 err_exit:
 902         rtnl_unlock();
 903
 904         /* Count references from TTY module */
 905         return err;
 906 }
 907
 908 /*
 909
 910   FIXME: 1,2 are fixed 3 was never true anyway.
 911
 912    Let me to blame a bit.
 913    1. TTY module calls this funstion on soft interrupt.
 914    2. TTY module calls this function WITH MASKED INTERRUPTS!
 915    3. TTY module does not notify us about line discipline
 916       shutdown,
 917
 918    Seems, now it is clean. The solution is to consider netdevice and
 919    line discipline sides as two independent threads.
 920
 921    By-product (not desired): sl? does not feel hangups and remains open.
 922    It is supposed, that user level program (dip, diald, slattach...)
 923    will catch SIGHUP and make the rest of work.
 924
 925    I see no way to make more with current tty code. --ANK
 926  */
 927
 928 /*
 929  * Close down a SLIP channel.
 930  * This means flushing out any pending queues, and then returning. This
 931  * call is serialized against other ldisc functions.
 932  */
 933 static void
 934 slip_close(struct tty_struct *tty)
 935 {
 936         struct slip *sl = (struct slip *) tty->disc_data;
 937
 938         /* First make sure we're connected. */
 939         if (!sl || sl->magic != SLIP_MAGIC || sl->tty != tty)
 940                 return;
 941
 942         tty->disc_data = NULL;
 943         sl->tty = NULL;
 944         if (!sl->leased)
 945                 sl->line = 0;
 946
 947         /* VSV = very important to remove timers */
 948 #ifdef CONFIG_SLIP_SMART
 949         del_timer_sync(&sl->keepalive_timer);
 950         del_timer_sync(&sl->outfill_timer);
 951 #endif
 952
 953         /* Count references from TTY module */
 954 }
 955
 956  /************************************************************************
 957   *                     STANDARD SLIP ENCAPSULATION                      *
 958   ************************************************************************/
 959
 960 int
 961 slip_esc(unsigned char *s, unsigned char *d, int len)
 962 {
 963         unsigned char *ptr = d;
 964         unsigned char c;
 965
 966         /*
 967          * Send an initial END character to flush out any
 968          * data that may have accumulated in the receiver
 969          * due to line noise.
 970          */
 971
 972         *ptr++ = END;
 973
 974         /*
 975          * For each byte in the packet, send the appropriate
 976          * character sequence, according to the SLIP protocol.
 977          */
 978
 979         while (len-- > 0) {
 980                 switch(c = *s++) {
 981                  case END:
 982                         *ptr++ = ESC;
 983                         *ptr++ = ESC_END;
 984                         break;
 985                  case ESC:
 986                         *ptr++ = ESC;
 987                         *ptr++ = ESC_ESC;
 988                         break;
 989                  default:
 990                         *ptr++ = c;
 991                         break;
 992                 }
 993         }
 994         *ptr++ = END;
 995         return (ptr - d);
 996 }
 997
 998 static void slip_unesc(struct slip *sl, unsigned char s)
 999 {
1000
1001         switch(s) {
1002          case END:
1003 #ifdef CONFIG_SLIP_SMART
1004                 /* drop keeptest bit = VSV */
1005                 if (test_bit(SLF_KEEPTEST, &sl->flags))
1006                         clear_bit(SLF_KEEPTEST, &sl->flags);
1007 #endif
1008
1009                 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 2))  {
1010                         sl_bump(sl);
1011                 }
1012                 clear_bit(SLF_ESCAPE, &sl->flags);
1013                 sl->rcount = 0;
1014                 return;
1015
1016          case ESC:
1017                 set_bit(SLF_ESCAPE, &sl->flags);
1018                 return;
1019          case ESC_ESC:
1020                 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))  {
1021                         s = ESC;
1022                 }
1023                 break;
1024          case ESC_END:
1025                 if (test_and_clear_bit(SLF_ESCAPE, &sl->flags))  {
1026                         s = END;
1027                 }
1028                 break;
1029         }
1030         if (!test_bit(SLF_ERROR, &sl->flags))  {
1031                 if (sl->rcount < sl->buffsize)  {
1032                         sl->rbuff[sl->rcount++] = s;
1033                         return;
1034                 }
1035                 sl->rx_over_errors++;
1036                 set_bit(SLF_ERROR, &sl->flags);
1037         }
1038 }
1039
1040
1041 #ifdef CONFIG_SLIP_MODE_SLIP6
1042 /************************************************************************
1043  *                       6 BIT SLIP ENCAPSULATION                       *
1044  ************************************************************************/
1045
1046 int
1047 slip_esc6(unsigned char *s, unsigned char *d, int len)
1048 {
1049         unsigned char *ptr = d;
1050         unsigned char c;
1051         int i;
1052         unsigned short v = 0;
1053         short bits = 0;
1054
1055         /*
1056          * Send an initial END character to flush out any
1057          * data that may have accumulated in the receiver
1058          * due to line noise.
1059          */
1060
1061         *ptr++ = 0x70;
1062
1063         /*
1064          * Encode the packet into printable ascii characters
1065          */
1066
1067         for (i = 0; i < len; ++i) {
1068                 v = (v << 8) | s[i];
1069                 bits += 8;
1070                 while (bits >= 6) {
1071                         bits -= 6;
1072                         c = 0x30 + ((v >> bits) & 0x3F);
1073                         *ptr++ = c;
1074                 }
1075         }
1076         if (bits) {
1077                 c = 0x30 + ((v << (6 - bits)) & 0x3F);
1078                 *ptr++ = c;
1079         }
1080         *ptr++ = 0x70;
1081         return ptr - d;
1082 }
1083
1084 void
1085 slip_unesc6(struct slip *sl, unsigned char s)
1086 {
1087         unsigned char c;
1088
1089         if (s == 0x70) {
1090 #ifdef CONFIG_SLIP_SMART
1091                 /* drop keeptest bit = VSV */
1092                 if (test_bit(SLF_KEEPTEST, &sl->flags))
1093                         clear_bit(SLF_KEEPTEST, &sl->flags);
1094 #endif
1095
1096                 if (!test_and_clear_bit(SLF_ERROR, &sl->flags) && (sl->rcount > 2))  {
1097                         sl_bump(sl);
1098                 }
1099                 sl->rcount = 0;
1100                 sl->xbits = 0;
1101                 sl->xdata = 0;
1102         } else if (s >= 0x30 && s < 0x70) {
1103                 sl->xdata = (sl->xdata << 6) | ((s - 0x30) & 0x3F);
1104                 sl->xbits += 6;
1105                 if (sl->xbits >= 8) {
1106                         sl->xbits -= 8;
1107                         c = (unsigned char)(sl->xdata >> sl->xbits);
1108                         if (!test_bit(SLF_ERROR, &sl->flags))  {
1109                                 if (sl->rcount < sl->buffsize)  {
1110                                         sl->rbuff[sl->rcount++] = c;
1111                                         return;
1112                                 }
1113                                 sl->rx_over_errors++;
1114                                 set_bit(SLF_ERROR, &sl->flags);
1115                         }
1116                 }
1117         }
1118 }
1119 #endif /* CONFIG_SLIP_MODE_SLIP6 */
1120
1121 /* Perform I/O control on an active SLIP channel. */
1122 static int slip_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
1123 {
1124         struct slip *sl = (struct slip *) tty->disc_data;
1125         unsigned int tmp;
1126         int __user *p = (int __user *)arg;
1127
1128         /* First make sure we're connected. */
1129         if (!sl || sl->magic != SLIP_MAGIC) {
1130                 return -EINVAL;
1131         }
1132
1133         switch(cmd) {
1134          case SIOCGIFNAME:
1135                 tmp = strlen(sl->dev->name) + 1;
1136                 if (copy_to_user((void __user *)arg, sl->dev->name, tmp))
1137                         return -EFAULT;
1138                 return 0;
1139
1140         case SIOCGIFENCAP:
1141                 if (put_user(sl->mode, p))
1142                         return -EFAULT;
1143                 return 0;
1144
1145         case SIOCSIFENCAP:
1146                 if (get_user(tmp, p))
1147                         return -EFAULT;
1148 #ifndef SL_INCLUDE_CSLIP
1149                 if (tmp & (SL_MODE_CSLIP|SL_MODE_ADAPTIVE))  {
1150                         return -EINVAL;
1151                 }
1152 #else
1153                 if ((tmp & (SL_MODE_ADAPTIVE | SL_MODE_CSLIP)) ==
1154                     (SL_MODE_ADAPTIVE | SL_MODE_CSLIP))  {
1155                         /* return -EINVAL; */
1156                         tmp &= ~SL_MODE_ADAPTIVE;
1157                 }
1158 #endif
1159 #ifndef CONFIG_SLIP_MODE_SLIP6
1160                 if (tmp & SL_MODE_SLIP6)  {
1161                         return -EINVAL;
1162                 }
1163 #endif
1164                 sl->mode = tmp;
1165                 sl->dev->type = ARPHRD_SLIP+sl->mode;
1166                 return 0;
1167
1168          case SIOCSIFHWADDR:
1169                 return -EINVAL;
1170
1171 #ifdef CONFIG_SLIP_SMART
1172         /* VSV changes start here */
1173         case SIOCSKEEPALIVE:
1174                 if (get_user(tmp, p))
1175                         return -EFAULT;
1176                 if (tmp > 255) /* max for unchar */
1177                         return -EINVAL;
1178
1179                 spin_lock_bh(&sl->lock);
1180                 if (!sl->tty) {
1181                         spin_unlock_bh(&sl->lock);
1182                         return -ENODEV;
1183                 }
1184                 if ((sl->keepalive = (unchar) tmp) != 0) {
1185                         mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1186                         set_bit(SLF_KEEPTEST, &sl->flags);
1187                 } else {
1188                         del_timer (&sl->keepalive_timer);
1189                 }
1190                 spin_unlock_bh(&sl->lock);
1191                 return 0;
1192
1193         case SIOCGKEEPALIVE:
1194                 if (put_user(sl->keepalive, p))
1195                         return -EFAULT;
1196                 return 0;
1197
1198         case SIOCSOUTFILL:
1199                 if (get_user(tmp, p))
1200                         return -EFAULT;
1201                 if (tmp > 255) /* max for unchar */
1202                         return -EINVAL;
1203                 spin_lock_bh(&sl->lock);
1204                 if (!sl->tty) {
1205                         spin_unlock_bh(&sl->lock);
1206                         return -ENODEV;
1207                 }
1208                 if ((sl->outfill = (unchar) tmp) != 0){
1209                         mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1210                         set_bit(SLF_OUTWAIT, &sl->flags);
1211                 } else {
1212                         del_timer (&sl->outfill_timer);
1213                 }
1214                 spin_unlock_bh(&sl->lock);
1215                 return 0;
1216
1217         case SIOCGOUTFILL:
1218                 if (put_user(sl->outfill, p))
1219                         return -EFAULT;
1220                 return 0;
1221         /* VSV changes end */
1222 #endif
1223
1224         /* Allow stty to read, but not set, the serial port */
1225         case TCGETS:
1226         case TCGETA:
1227                 return n_tty_ioctl(tty, file, cmd, arg);
1228
1229         default:
1230                 return -ENOIOCTLCMD;
1231         }
1232 }
1233
1234 /* VSV changes start here */
1235 #ifdef CONFIG_SLIP_SMART
1236 /* function do_ioctl called from net/core/dev.c
1237    to allow get/set outfill/keepalive parameter
1238    by ifconfig                                 */
1239
1240 static int sl_ioctl(struct net_device *dev,struct ifreq *rq,int cmd)
1241 {
1242         struct slip *sl = netdev_priv(dev);
1243         unsigned long *p = (unsigned long *)&rq->ifr_ifru;
1244
1245         if (sl == NULL)         /* Allocation failed ?? */
1246                 return -ENODEV;
1247
1248         spin_lock_bh(&sl->lock);
1249
1250         if (!sl->tty) {
1251                 spin_unlock_bh(&sl->lock);
1252                 return -ENODEV;
1253         }
1254
1255         switch(cmd){
1256         case SIOCSKEEPALIVE:
1257                 /* max for unchar */
1258                 if ((unsigned)*p > 255) {
1259                         spin_unlock_bh(&sl->lock);
1260                         return -EINVAL;
1261                 }
1262                 sl->keepalive = (unchar) *p;
1263                 if (sl->keepalive != 0) {
1264                         sl->keepalive_timer.expires=jiffies+sl->keepalive*HZ;
1265                         mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1266                         set_bit(SLF_KEEPTEST, &sl->flags);
1267                 } else {
1268                         del_timer(&sl->keepalive_timer);
1269                 }
1270                 break;
1271
1272         case SIOCGKEEPALIVE:
1273                 *p = sl->keepalive;
1274                 break;
1275
1276         case SIOCSOUTFILL:
1277                 if ((unsigned)*p > 255) { /* max for unchar */
1278                         spin_unlock_bh(&sl->lock);
1279                         return -EINVAL;
1280                 }
1281                 if ((sl->outfill = (unchar)*p) != 0){
1282                         mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1283                         set_bit(SLF_OUTWAIT, &sl->flags);
1284                 } else {
1285                         del_timer (&sl->outfill_timer);
1286                 }
1287                 break;
1288
1289         case SIOCGOUTFILL:
1290                 *p = sl->outfill;
1291                 break;
1292
1293         case SIOCSLEASE:
1294                 /* Resolve race condition, when ioctl'ing hanged up
1295                    and opened by another process device.
1296                  */
1297                 if (sl->tty != current->signal->tty && sl->pid != current->pid) {
1298                         spin_unlock_bh(&sl->lock);
1299                         return -EPERM;
1300                 }
1301                 sl->leased = 0;
1302                 if (*p)
1303                         sl->leased = 1;
1304                 break;
1305
1306         case SIOCGLEASE:
1307                 *p = sl->leased;
1308         };
1309         spin_unlock_bh(&sl->lock);
1310         return 0;
1311 }
1312 #endif
1313 /* VSV changes end */
1314
1315 static struct tty_ldisc sl_ldisc = {
1316         .owner          = THIS_MODULE,
1317         .magic          = TTY_LDISC_MAGIC,
1318         .name           = "slip",
1319         .open           = slip_open,
1320         .close          = slip_close,
1321         .ioctl          = slip_ioctl,
1322         .receive_buf    = slip_receive_buf,
1323         .write_wakeup   = slip_write_wakeup,
1324 };
1325
1326 static int __init slip_init(void)
1327 {
1328         int status;
1329
1330         if (slip_maxdev < 4)
1331                 slip_maxdev = 4; /* Sanity */
1332
1333         printk(KERN_INFO "SLIP: version %s (dynamic channels, max=%d)"
1334 #ifdef CONFIG_SLIP_MODE_SLIP6
1335                " (6 bit encapsulation enabled)"
1336 #endif
1337                ".\n",
1338                SLIP_VERSION, slip_maxdev );
1339 #if defined(SL_INCLUDE_CSLIP)
1340         printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n");
1341 #endif
1342 #ifdef CONFIG_SLIP_SMART
1343         printk(KERN_INFO "SLIP linefill/keepalive option.\n");
1344 #endif
1345
1346         slip_devs = kzalloc(sizeof(struct net_device *)*slip_maxdev, GFP_KERNEL);
1347         if (!slip_devs) {
1348                 printk(KERN_ERR "SLIP: Can't allocate slip devices array!  Uaargh! (-> No SLIP available)\n");
1349                 return -ENOMEM;
1350         }
1351
1352         /* Fill in our line protocol discipline, and register it */
1353         if ((status = tty_register_ldisc(N_SLIP, &sl_ldisc)) != 0)  {
1354                 printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status);
1355                 kfree(slip_devs);
1356         }
1357         return status;
1358 }
1359
1360 static void __exit slip_exit(void)
1361 {
1362         int i;
1363         struct net_device *dev;
1364         struct slip *sl;
1365         unsigned long timeout = jiffies + HZ;
1366         int busy = 0;
1367
1368         if (slip_devs == NULL)
1369                 return;
1370
1371         /* First of all: check for active disciplines and hangup them.
1372          */
1373         do {
1374                 if (busy)
1375                         msleep_interruptible(100);
1376
1377                 busy = 0;
1378                 for (i = 0; i < slip_maxdev; i++) {
1379                         dev = slip_devs[i];
1380                         if (!dev)
1381                                 continue;
1382                         sl = netdev_priv(dev);
1383                         spin_lock_bh(&sl->lock);
1384                         if (sl->tty) {
1385                                 busy++;
1386                                 tty_hangup(sl->tty);
1387                         }
1388                         spin_unlock_bh(&sl->lock);
1389                 }
1390         } while (busy && time_before(jiffies, timeout));
1391
1392
1393         for (i = 0; i < slip_maxdev; i++) {
1394                 dev = slip_devs[i];
1395                 if (!dev)
1396                         continue;
1397                 slip_devs[i] = NULL;
1398
1399                 sl = netdev_priv(dev);
1400                 if (sl->tty) {
1401                         printk(KERN_ERR "%s: tty discipline still running\n",
1402                                dev->name);
1403                         /* Intentionally leak the control block. */
1404                         dev->destructor = NULL;
1405                 }
1406
1407                 unregister_netdev(dev);
1408         }
1409
1410         kfree(slip_devs);
1411         slip_devs = NULL;
1412
1413         if ((i = tty_unregister_ldisc(N_SLIP)))
1414         {
1415                 printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i);
1416         }
1417 }
1418
1419 module_init(slip_init);
1420 module_exit(slip_exit);
1421
1422 #ifdef CONFIG_SLIP_SMART
1423 /*
1424  * This is start of the code for multislip style line checking
1425  * added by Stanislav Voronyi. All changes before marked VSV
1426  */
1427
1428 static void sl_outfill(unsigned long sls)
1429 {
1430         struct slip *sl=(struct slip *)sls;
1431
1432         spin_lock(&sl->lock);
1433
1434         if (sl->tty == NULL)
1435                 goto out;
1436
1437         if(sl->outfill)
1438         {
1439                 if( test_bit(SLF_OUTWAIT, &sl->flags) )
1440                 {
1441                         /* no packets were transmitted, do outfill */
1442 #ifdef CONFIG_SLIP_MODE_SLIP6
1443                         unsigned char s = (sl->mode & SL_MODE_SLIP6)?0x70:END;
1444 #else
1445                         unsigned char s = END;
1446 #endif
1447                         /* put END into tty queue. Is it right ??? */
1448                         if (!netif_queue_stopped(sl->dev))
1449                         {
1450                                 /* if device busy no outfill */
1451                                 sl->tty->driver->write(sl->tty, &s, 1);
1452                         }
1453                 }
1454                 else
1455                         set_bit(SLF_OUTWAIT, &sl->flags);
1456
1457                 mod_timer(&sl->outfill_timer, jiffies+sl->outfill*HZ);
1458         }
1459 out:
1460         spin_unlock(&sl->lock);
1461 }
1462
1463 static void sl_keepalive(unsigned long sls)
1464 {
1465         struct slip *sl=(struct slip *)sls;
1466
1467         spin_lock(&sl->lock);
1468
1469         if (sl->tty == NULL)
1470                 goto out;
1471
1472         if( sl->keepalive)
1473         {
1474                 if(test_bit(SLF_KEEPTEST, &sl->flags))
1475                 {
1476                         /* keepalive still high :(, we must hangup */
1477                         if( sl->outfill ) /* outfill timer must be deleted too */
1478                                 (void)del_timer(&sl->outfill_timer);
1479                         printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name);
1480                         tty_hangup(sl->tty); /* this must hangup tty & close slip */
1481                         /* I think we need not something else */
1482                         goto out;
1483                 }
1484                 else
1485                         set_bit(SLF_KEEPTEST, &sl->flags);
1486
1487                 mod_timer(&sl->keepalive_timer, jiffies+sl->keepalive*HZ);
1488         }
1489
1490 out:
1491         spin_unlock(&sl->lock);
1492 }
1493
1494 #endif
1495 MODULE_LICENSE("GPL");
1496 MODULE_ALIAS_LDISC(N_SLIP);