git.oblomov.eu Git - linux-2.6/blob - drivers/video/cyber2000fb.c

   1 /*
   2  *  linux/drivers/video/cyber2000fb.c
   3  *
   4  *  Copyright (C) 1998-2002 Russell King
   5  *
   6  *  MIPS and 50xx clock support
   7  *  Copyright (C) 2001 Bradley D. LaRonde <brad@ltc.com>
   8  *
   9  *  32 bit support, text color and panning fixes for modes != 8 bit
  10  *  Copyright (C) 2002 Denis Oliver Kropp <dok@directfb.org>
  11  *
  12  * This program is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  *
  16  * Integraphics CyberPro 2000, 2010 and 5000 frame buffer device
  17  *
  18  * Based on cyberfb.c.
  19  *
  20  * Note that we now use the new fbcon fix, var and cmap scheme.  We do
  21  * still have to check which console is the currently displayed one
  22  * however, especially for the colourmap stuff.
  23  *
  24  * We also use the new hotplug PCI subsystem.  I'm not sure if there
  25  * are any such cards, but I'm erring on the side of caution.  We don't
  26  * want to go pop just because someone does have one.
  27  *
  28  * Note that this doesn't work fully in the case of multiple CyberPro
  29  * cards with grabbers.  We currently can only attach to the first
  30  * CyberPro card found.
  31  *
  32  * When we're in truecolour mode, we power down the LUT RAM as a power
  33  * saving feature.  Also, when we enter any of the powersaving modes
  34  * (except soft blanking) we power down the RAMDACs.  This saves about
  35  * 1W, which is roughly 8% of the power consumption of a NetWinder
  36  * (which, incidentally, is about the same saving as a 2.5in hard disk
  37  * entering standby mode.)
  38  */
  39 #include <linux/module.h>
  40 #include <linux/kernel.h>
  41 #include <linux/errno.h>
  42 #include <linux/string.h>
  43 #include <linux/mm.h>
  44 #include <linux/slab.h>
  45 #include <linux/delay.h>
  46 #include <linux/fb.h>
  47 #include <linux/pci.h>
  48 #include <linux/init.h>
  49 #include <linux/io.h>
  50
  51 #include <asm/pgtable.h>
  52 #include <asm/system.h>
  53
  54 #ifdef __arm__
  55 #include <asm/mach-types.h>
  56 #endif
  57
  58 #include "cyber2000fb.h"
  59
  60 struct cfb_info {
  61         struct fb_info          fb;
  62         struct display_switch   *dispsw;
  63         struct display          *display;
  64         struct pci_dev          *dev;
  65         unsigned char           __iomem *region;
  66         unsigned char           __iomem *regs;
  67         u_int                   id;
  68         int                     func_use_count;
  69         u_long                  ref_ps;
  70
  71         /*
  72          * Clock divisors
  73          */
  74         u_int                   divisors[4];
  75
  76         struct {
  77                 u8 red, green, blue;
  78         } palette[NR_PALETTE];
  79
  80         u_char                  mem_ctl1;
  81         u_char                  mem_ctl2;
  82         u_char                  mclk_mult;
  83         u_char                  mclk_div;
  84         /*
  85          * RAMDAC control register is both of these or'ed together
  86          */
  87         u_char                  ramdac_ctrl;
  88         u_char                  ramdac_powerdown;
  89
  90         u32                     pseudo_palette[16];
  91 };
  92
  93 static char *default_font = "Acorn8x8";
  94 module_param(default_font, charp, 0);
  95 MODULE_PARM_DESC(default_font, "Default font name");
  96
  97 /*
  98  * Our access methods.
  99  */
 100 #define cyber2000fb_writel(val, reg, cfb)       writel(val, (cfb)->regs + (reg))
 101 #define cyber2000fb_writew(val, reg, cfb)       writew(val, (cfb)->regs + (reg))
 102 #define cyber2000fb_writeb(val, reg, cfb)       writeb(val, (cfb)->regs + (reg))
 103
 104 #define cyber2000fb_readb(reg, cfb)             readb((cfb)->regs + (reg))
 105
 106 static inline void
 107 cyber2000_crtcw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 108 {
 109         cyber2000fb_writew((reg & 255) | val << 8, 0x3d4, cfb);
 110 }
 111
 112 static inline void
 113 cyber2000_grphw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 114 {
 115         cyber2000fb_writew((reg & 255) | val << 8, 0x3ce, cfb);
 116 }
 117
 118 static inline unsigned int
 119 cyber2000_grphr(unsigned int reg, struct cfb_info *cfb)
 120 {
 121         cyber2000fb_writeb(reg, 0x3ce, cfb);
 122         return cyber2000fb_readb(0x3cf, cfb);
 123 }
 124
 125 static inline void
 126 cyber2000_attrw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 127 {
 128         cyber2000fb_readb(0x3da, cfb);
 129         cyber2000fb_writeb(reg, 0x3c0, cfb);
 130         cyber2000fb_readb(0x3c1, cfb);
 131         cyber2000fb_writeb(val, 0x3c0, cfb);
 132 }
 133
 134 static inline void
 135 cyber2000_seqw(unsigned int reg, unsigned int val, struct cfb_info *cfb)
 136 {
 137         cyber2000fb_writew((reg & 255) | val << 8, 0x3c4, cfb);
 138 }
 139
 140 /* -------------------- Hardware specific routines ------------------------- */
 141
 142 /*
 143  * Hardware Cyber2000 Acceleration
 144  */
 145 static void
 146 cyber2000fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 147 {
 148         struct cfb_info *cfb = (struct cfb_info *)info;
 149         unsigned long dst, col;
 150
 151         if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
 152                 cfb_fillrect(info, rect);
 153                 return;
 154         }
 155
 156         cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
 157         cyber2000fb_writew(rect->width - 1, CO_REG_PIXWIDTH, cfb);
 158         cyber2000fb_writew(rect->height - 1, CO_REG_PIXHEIGHT, cfb);
 159
 160         col = rect->color;
 161         if (cfb->fb.var.bits_per_pixel > 8)
 162                 col = ((u32 *)cfb->fb.pseudo_palette)[col];
 163         cyber2000fb_writel(col, CO_REG_FGCOLOUR, cfb);
 164
 165         dst = rect->dx + rect->dy * cfb->fb.var.xres_virtual;
 166         if (cfb->fb.var.bits_per_pixel == 24) {
 167                 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
 168                 dst *= 3;
 169         }
 170
 171         cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
 172         cyber2000fb_writeb(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
 173         cyber2000fb_writew(CO_CMD_L_PATTERN_FGCOL, CO_REG_CMD_L, cfb);
 174         cyber2000fb_writew(CO_CMD_H_BLITTER, CO_REG_CMD_H, cfb);
 175 }
 176
 177 static void
 178 cyber2000fb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
 179 {
 180         struct cfb_info *cfb = (struct cfb_info *)info;
 181         unsigned int cmd = CO_CMD_L_PATTERN_FGCOL;
 182         unsigned long src, dst;
 183
 184         if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT)) {
 185                 cfb_copyarea(info, region);
 186                 return;
 187         }
 188
 189         cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
 190         cyber2000fb_writew(region->width - 1, CO_REG_PIXWIDTH, cfb);
 191         cyber2000fb_writew(region->height - 1, CO_REG_PIXHEIGHT, cfb);
 192
 193         src = region->sx + region->sy * cfb->fb.var.xres_virtual;
 194         dst = region->dx + region->dy * cfb->fb.var.xres_virtual;
 195
 196         if (region->sx < region->dx) {
 197                 src += region->width - 1;
 198                 dst += region->width - 1;
 199                 cmd |= CO_CMD_L_INC_LEFT;
 200         }
 201
 202         if (region->sy < region->dy) {
 203                 src += (region->height - 1) * cfb->fb.var.xres_virtual;
 204                 dst += (region->height - 1) * cfb->fb.var.xres_virtual;
 205                 cmd |= CO_CMD_L_INC_UP;
 206         }
 207
 208         if (cfb->fb.var.bits_per_pixel == 24) {
 209                 cyber2000fb_writeb(dst, CO_REG_X_PHASE, cfb);
 210                 src *= 3;
 211                 dst *= 3;
 212         }
 213         cyber2000fb_writel(src, CO_REG_SRC1_PTR, cfb);
 214         cyber2000fb_writel(dst, CO_REG_DEST_PTR, cfb);
 215         cyber2000fb_writew(CO_FG_MIX_SRC, CO_REG_FGMIX, cfb);
 216         cyber2000fb_writew(cmd, CO_REG_CMD_L, cfb);
 217         cyber2000fb_writew(CO_CMD_H_FGSRCMAP | CO_CMD_H_BLITTER,
 218                            CO_REG_CMD_H, cfb);
 219 }
 220
 221 static void
 222 cyber2000fb_imageblit(struct fb_info *info, const struct fb_image *image)
 223 {
 224         cfb_imageblit(info, image);
 225         return;
 226 }
 227
 228 static int cyber2000fb_sync(struct fb_info *info)
 229 {
 230         struct cfb_info *cfb = (struct cfb_info *)info;
 231         int count = 100000;
 232
 233         if (!(cfb->fb.var.accel_flags & FB_ACCELF_TEXT))
 234                 return 0;
 235
 236         while (cyber2000fb_readb(CO_REG_CONTROL, cfb) & CO_CTRL_BUSY) {
 237                 if (!count--) {
 238                         debug_printf("accel_wait timed out\n");
 239                         cyber2000fb_writeb(0, CO_REG_CONTROL, cfb);
 240                         break;
 241                 }
 242                 udelay(1);
 243         }
 244         return 0;
 245 }
 246
 247 /*
 248  * ===========================================================================
 249  */
 250
 251 static inline u32 convert_bitfield(u_int val, struct fb_bitfield *bf)
 252 {
 253         u_int mask = (1 << bf->length) - 1;
 254
 255         return (val >> (16 - bf->length) & mask) << bf->offset;
 256 }
 257
 258 /*
 259  *    Set a single color register. Return != 0 for invalid regno.
 260  */
 261 static int
 262 cyber2000fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 263                       u_int transp, struct fb_info *info)
 264 {
 265         struct cfb_info *cfb = (struct cfb_info *)info;
 266         struct fb_var_screeninfo *var = &cfb->fb.var;
 267         u32 pseudo_val;
 268         int ret = 1;
 269
 270         switch (cfb->fb.fix.visual) {
 271         default:
 272                 return 1;
 273
 274         /*
 275          * Pseudocolour:
 276          *         8     8
 277          * pixel --/--+--/-->  red lut  --> red dac
 278          *            |  8
 279          *            +--/--> green lut --> green dac
 280          *            |  8
 281          *            +--/-->  blue lut --> blue dac
 282          */
 283         case FB_VISUAL_PSEUDOCOLOR:
 284                 if (regno >= NR_PALETTE)
 285                         return 1;
 286
 287                 red >>= 8;
 288                 green >>= 8;
 289                 blue >>= 8;
 290
 291                 cfb->palette[regno].red = red;
 292                 cfb->palette[regno].green = green;
 293                 cfb->palette[regno].blue = blue;
 294
 295                 cyber2000fb_writeb(regno, 0x3c8, cfb);
 296                 cyber2000fb_writeb(red, 0x3c9, cfb);
 297                 cyber2000fb_writeb(green, 0x3c9, cfb);
 298                 cyber2000fb_writeb(blue, 0x3c9, cfb);
 299                 return 0;
 300
 301         /*
 302          * Direct colour:
 303          *         n     rl
 304          * pixel --/--+--/-->  red lut  --> red dac
 305          *            |  gl
 306          *            +--/--> green lut --> green dac
 307          *            |  bl
 308          *            +--/-->  blue lut --> blue dac
 309          * n = bpp, rl = red length, gl = green length, bl = blue length
 310          */
 311         case FB_VISUAL_DIRECTCOLOR:
 312                 red >>= 8;
 313                 green >>= 8;
 314                 blue >>= 8;
 315
 316                 if (var->green.length == 6 && regno < 64) {
 317                         cfb->palette[regno << 2].green = green;
 318
 319                         /*
 320                          * The 6 bits of the green component are applied
 321                          * to the high 6 bits of the LUT.
 322                          */
 323                         cyber2000fb_writeb(regno << 2, 0x3c8, cfb);
 324                         cyber2000fb_writeb(cfb->palette[regno >> 1].red,
 325                                            0x3c9, cfb);
 326                         cyber2000fb_writeb(green, 0x3c9, cfb);
 327                         cyber2000fb_writeb(cfb->palette[regno >> 1].blue,
 328                                            0x3c9, cfb);
 329
 330                         green = cfb->palette[regno << 3].green;
 331
 332                         ret = 0;
 333                 }
 334
 335                 if (var->green.length >= 5 && regno < 32) {
 336                         cfb->palette[regno << 3].red = red;
 337                         cfb->palette[regno << 3].green = green;
 338                         cfb->palette[regno << 3].blue = blue;
 339
 340                         /*
 341                          * The 5 bits of each colour component are
 342                          * applied to the high 5 bits of the LUT.
 343                          */
 344                         cyber2000fb_writeb(regno << 3, 0x3c8, cfb);
 345                         cyber2000fb_writeb(red, 0x3c9, cfb);
 346                         cyber2000fb_writeb(green, 0x3c9, cfb);
 347                         cyber2000fb_writeb(blue, 0x3c9, cfb);
 348                         ret = 0;
 349                 }
 350
 351                 if (var->green.length == 4 && regno < 16) {
 352                         cfb->palette[regno << 4].red = red;
 353                         cfb->palette[regno << 4].green = green;
 354                         cfb->palette[regno << 4].blue = blue;
 355
 356                         /*
 357                          * The 5 bits of each colour component are
 358                          * applied to the high 5 bits of the LUT.
 359                          */
 360                         cyber2000fb_writeb(regno << 4, 0x3c8, cfb);
 361                         cyber2000fb_writeb(red, 0x3c9, cfb);
 362                         cyber2000fb_writeb(green, 0x3c9, cfb);
 363                         cyber2000fb_writeb(blue, 0x3c9, cfb);
 364                         ret = 0;
 365                 }
 366
 367                 /*
 368                  * Since this is only used for the first 16 colours, we
 369                  * don't have to care about overflowing for regno >= 32
 370                  */
 371                 pseudo_val = regno << var->red.offset |
 372                              regno << var->green.offset |
 373                              regno << var->blue.offset;
 374                 break;
 375
 376         /*
 377          * True colour:
 378          *         n     rl
 379          * pixel --/--+--/--> red dac
 380          *            |  gl
 381          *            +--/--> green dac
 382          *            |  bl
 383          *            +--/--> blue dac
 384          * n = bpp, rl = red length, gl = green length, bl = blue length
 385          */
 386         case FB_VISUAL_TRUECOLOR:
 387                 pseudo_val = convert_bitfield(transp ^ 0xffff, &var->transp);
 388                 pseudo_val |= convert_bitfield(red, &var->red);
 389                 pseudo_val |= convert_bitfield(green, &var->green);
 390                 pseudo_val |= convert_bitfield(blue, &var->blue);
 391                 break;
 392         }
 393
 394         /*
 395          * Now set our pseudo palette for the CFB16/24/32 drivers.
 396          */
 397         if (regno < 16)
 398                 ((u32 *)cfb->fb.pseudo_palette)[regno] = pseudo_val;
 399
 400         return ret;
 401 }
 402
 403 struct par_info {
 404         /*
 405          * Hardware
 406          */
 407         u_char  clock_mult;
 408         u_char  clock_div;
 409         u_char  extseqmisc;
 410         u_char  co_pixfmt;
 411         u_char  crtc_ofl;
 412         u_char  crtc[19];
 413         u_int   width;
 414         u_int   pitch;
 415         u_int   fetch;
 416
 417         /*
 418          * Other
 419          */
 420         u_char  ramdac;
 421 };
 422
 423 static const u_char crtc_idx[] = {
 424         0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 425         0x08, 0x09,
 426         0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18
 427 };
 428
 429 static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
 430 {
 431         unsigned int i;
 432         unsigned int val = cfb->ramdac_ctrl | cfb->ramdac_powerdown;
 433
 434         cyber2000fb_writeb(0x56, 0x3ce, cfb);
 435         i = cyber2000fb_readb(0x3cf, cfb);
 436         cyber2000fb_writeb(i | 4, 0x3cf, cfb);
 437         cyber2000fb_writeb(val, 0x3c6, cfb);
 438         cyber2000fb_writeb(i, 0x3cf, cfb);
 439 }
 440
 441 static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
 442 {
 443         u_int i;
 444
 445         /*
 446          * Blank palette
 447          */
 448         for (i = 0; i < NR_PALETTE; i++) {
 449                 cyber2000fb_writeb(i, 0x3c8, cfb);
 450                 cyber2000fb_writeb(0, 0x3c9, cfb);
 451                 cyber2000fb_writeb(0, 0x3c9, cfb);
 452                 cyber2000fb_writeb(0, 0x3c9, cfb);
 453         }
 454
 455         cyber2000fb_writeb(0xef, 0x3c2, cfb);
 456         cyber2000_crtcw(0x11, 0x0b, cfb);
 457         cyber2000_attrw(0x11, 0x00, cfb);
 458
 459         cyber2000_seqw(0x00, 0x01, cfb);
 460         cyber2000_seqw(0x01, 0x01, cfb);
 461         cyber2000_seqw(0x02, 0x0f, cfb);
 462         cyber2000_seqw(0x03, 0x00, cfb);
 463         cyber2000_seqw(0x04, 0x0e, cfb);
 464         cyber2000_seqw(0x00, 0x03, cfb);
 465
 466         for (i = 0; i < sizeof(crtc_idx); i++)
 467                 cyber2000_crtcw(crtc_idx[i], hw->crtc[i], cfb);
 468
 469         for (i = 0x0a; i < 0x10; i++)
 470                 cyber2000_crtcw(i, 0, cfb);
 471
 472         cyber2000_grphw(EXT_CRT_VRTOFL, hw->crtc_ofl, cfb);
 473         cyber2000_grphw(0x00, 0x00, cfb);
 474         cyber2000_grphw(0x01, 0x00, cfb);
 475         cyber2000_grphw(0x02, 0x00, cfb);
 476         cyber2000_grphw(0x03, 0x00, cfb);
 477         cyber2000_grphw(0x04, 0x00, cfb);
 478         cyber2000_grphw(0x05, 0x60, cfb);
 479         cyber2000_grphw(0x06, 0x05, cfb);
 480         cyber2000_grphw(0x07, 0x0f, cfb);
 481         cyber2000_grphw(0x08, 0xff, cfb);
 482
 483         /* Attribute controller registers */
 484         for (i = 0; i < 16; i++)
 485                 cyber2000_attrw(i, i, cfb);
 486
 487         cyber2000_attrw(0x10, 0x01, cfb);
 488         cyber2000_attrw(0x11, 0x00, cfb);
 489         cyber2000_attrw(0x12, 0x0f, cfb);
 490         cyber2000_attrw(0x13, 0x00, cfb);
 491         cyber2000_attrw(0x14, 0x00, cfb);
 492
 493         /* PLL registers */
 494         cyber2000_grphw(EXT_DCLK_MULT, hw->clock_mult, cfb);
 495         cyber2000_grphw(EXT_DCLK_DIV, hw->clock_div, cfb);
 496         cyber2000_grphw(EXT_MCLK_MULT, cfb->mclk_mult, cfb);
 497         cyber2000_grphw(EXT_MCLK_DIV, cfb->mclk_div, cfb);
 498         cyber2000_grphw(0x90, 0x01, cfb);
 499         cyber2000_grphw(0xb9, 0x80, cfb);
 500         cyber2000_grphw(0xb9, 0x00, cfb);
 501
 502         cfb->ramdac_ctrl = hw->ramdac;
 503         cyber2000fb_write_ramdac_ctrl(cfb);
 504
 505         cyber2000fb_writeb(0x20, 0x3c0, cfb);
 506         cyber2000fb_writeb(0xff, 0x3c6, cfb);
 507
 508         cyber2000_grphw(0x14, hw->fetch, cfb);
 509         cyber2000_grphw(0x15, ((hw->fetch >> 8) & 0x03) |
 510                               ((hw->pitch >> 4) & 0x30), cfb);
 511         cyber2000_grphw(EXT_SEQ_MISC, hw->extseqmisc, cfb);
 512
 513         /*
 514          * Set up accelerator registers
 515          */
 516         cyber2000fb_writew(hw->width, CO_REG_SRC_WIDTH, cfb);
 517         cyber2000fb_writew(hw->width, CO_REG_DEST_WIDTH, cfb);
 518         cyber2000fb_writeb(hw->co_pixfmt, CO_REG_PIXFMT, cfb);
 519 }
 520
 521 static inline int
 522 cyber2000fb_update_start(struct cfb_info *cfb, struct fb_var_screeninfo *var)
 523 {
 524         u_int base = var->yoffset * var->xres_virtual + var->xoffset;
 525
 526         base *= var->bits_per_pixel;
 527
 528         /*
 529          * Convert to bytes and shift two extra bits because DAC
 530          * can only start on 4 byte aligned data.
 531          */
 532         base >>= 5;
 533
 534         if (base >= 1 << 20)
 535                 return -EINVAL;
 536
 537         cyber2000_grphw(0x10, base >> 16 | 0x10, cfb);
 538         cyber2000_crtcw(0x0c, base >> 8, cfb);
 539         cyber2000_crtcw(0x0d, base, cfb);
 540
 541         return 0;
 542 }
 543
 544 static int
 545 cyber2000fb_decode_crtc(struct par_info *hw, struct cfb_info *cfb,
 546                         struct fb_var_screeninfo *var)
 547 {
 548         u_int Htotal, Hblankend, Hsyncend;
 549         u_int Vtotal, Vdispend, Vblankstart, Vblankend, Vsyncstart, Vsyncend;
 550 #define ENCODE_BIT(v, b1, m, b2) ((((v) >> (b1)) & (m)) << (b2))
 551
 552         hw->crtc[13] = hw->pitch;
 553         hw->crtc[17] = 0xe3;
 554         hw->crtc[14] = 0;
 555         hw->crtc[8]  = 0;
 556
 557         Htotal     = var->xres + var->right_margin +
 558                      var->hsync_len + var->left_margin;
 559
 560         if (Htotal > 2080)
 561                 return -EINVAL;
 562
 563         hw->crtc[0] = (Htotal >> 3) - 5;
 564         hw->crtc[1] = (var->xres >> 3) - 1;
 565         hw->crtc[2] = var->xres >> 3;
 566         hw->crtc[4] = (var->xres + var->right_margin) >> 3;
 567
 568         Hblankend   = (Htotal - 4 * 8) >> 3;
 569
 570         hw->crtc[3] = ENCODE_BIT(Hblankend,  0, 0x1f,  0) |
 571                       ENCODE_BIT(1,          0, 0x01,  7);
 572
 573         Hsyncend    = (var->xres + var->right_margin + var->hsync_len) >> 3;
 574
 575         hw->crtc[5] = ENCODE_BIT(Hsyncend,   0, 0x1f,  0) |
 576                       ENCODE_BIT(Hblankend,  5, 0x01,  7);
 577
 578         Vdispend    = var->yres - 1;
 579         Vsyncstart  = var->yres + var->lower_margin;
 580         Vsyncend    = var->yres + var->lower_margin + var->vsync_len;
 581         Vtotal      = var->yres + var->lower_margin + var->vsync_len +
 582                       var->upper_margin - 2;
 583
 584         if (Vtotal > 2047)
 585                 return -EINVAL;
 586
 587         Vblankstart = var->yres + 6;
 588         Vblankend   = Vtotal - 10;
 589
 590         hw->crtc[6]  = Vtotal;
 591         hw->crtc[7]  = ENCODE_BIT(Vtotal,     8, 0x01,  0) |
 592                         ENCODE_BIT(Vdispend,   8, 0x01,  1) |
 593                         ENCODE_BIT(Vsyncstart, 8, 0x01,  2) |
 594                         ENCODE_BIT(Vblankstart, 8, 0x01,  3) |
 595                         ENCODE_BIT(1,          0, 0x01,  4) |
 596                         ENCODE_BIT(Vtotal,     9, 0x01,  5) |
 597                         ENCODE_BIT(Vdispend,   9, 0x01,  6) |
 598                         ENCODE_BIT(Vsyncstart, 9, 0x01,  7);
 599         hw->crtc[9]  = ENCODE_BIT(0,          0, 0x1f,  0) |
 600                         ENCODE_BIT(Vblankstart, 9, 0x01,  5) |
 601                         ENCODE_BIT(1,          0, 0x01,  6);
 602         hw->crtc[10] = Vsyncstart;
 603         hw->crtc[11] = ENCODE_BIT(Vsyncend,   0, 0x0f,  0) |
 604                        ENCODE_BIT(1,          0, 0x01,  7);
 605         hw->crtc[12] = Vdispend;
 606         hw->crtc[15] = Vblankstart;
 607         hw->crtc[16] = Vblankend;
 608         hw->crtc[18] = 0xff;
 609
 610         /*
 611          * overflow - graphics reg 0x11
 612          * 0=VTOTAL:10 1=VDEND:10 2=VRSTART:10 3=VBSTART:10
 613          * 4=LINECOMP:10 5-IVIDEO 6=FIXCNT
 614          */
 615         hw->crtc_ofl =
 616                 ENCODE_BIT(Vtotal, 10, 0x01, 0) |
 617                 ENCODE_BIT(Vdispend, 10, 0x01, 1) |
 618                 ENCODE_BIT(Vsyncstart, 10, 0x01, 2) |
 619                 ENCODE_BIT(Vblankstart, 10, 0x01, 3) |
 620                 EXT_CRT_VRTOFL_LINECOMP10;
 621
 622         /* woody: set the interlaced bit... */
 623         /* FIXME: what about doublescan? */
 624         if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED)
 625                 hw->crtc_ofl |= EXT_CRT_VRTOFL_INTERLACE;
 626
 627         return 0;
 628 }
 629
 630 /*
 631  * The following was discovered by a good monitor, bit twiddling, theorising
 632  * and but mostly luck.  Strangely, it looks like everyone elses' PLL!
 633  *
 634  * Clock registers:
 635  *   fclock = fpll / div2
 636  *   fpll   = fref * mult / div1
 637  * where:
 638  *   fref = 14.318MHz (69842ps)
 639  *   mult = reg0xb0.7:0
 640  *   div1 = (reg0xb1.5:0 + 1)
 641  *   div2 =  2^(reg0xb1.7:6)
 642  *   fpll should be between 115 and 260 MHz
 643  *  (8696ps and 3846ps)
 644  */
 645 static int
 646 cyber2000fb_decode_clock(struct par_info *hw, struct cfb_info *cfb,
 647                          struct fb_var_screeninfo *var)
 648 {
 649         u_long pll_ps = var->pixclock;
 650         const u_long ref_ps = cfb->ref_ps;
 651         u_int div2, t_div1, best_div1, best_mult;
 652         int best_diff;
 653         int vco;
 654
 655         /*
 656          * Step 1:
 657          *   find div2 such that 115MHz < fpll < 260MHz
 658          *   and 0 <= div2 < 4
 659          */
 660         for (div2 = 0; div2 < 4; div2++) {
 661                 u_long new_pll;
 662
 663                 new_pll = pll_ps / cfb->divisors[div2];
 664                 if (8696 > new_pll && new_pll > 3846) {
 665                         pll_ps = new_pll;
 666                         break;
 667                 }
 668         }
 669
 670         if (div2 == 4)
 671                 return -EINVAL;
 672
 673         /*
 674          * Step 2:
 675          *  Given pll_ps and ref_ps, find:
 676          *    pll_ps * 0.995 < pll_ps_calc < pll_ps * 1.005
 677          *  where { 1 < best_div1 < 32, 1 < best_mult < 256 }
 678          *    pll_ps_calc = best_div1 / (ref_ps * best_mult)
 679          */
 680         best_diff = 0x7fffffff;
 681         best_mult = 32;
 682         best_div1 = 255;
 683         for (t_div1 = 32; t_div1 > 1; t_div1 -= 1) {
 684                 u_int rr, t_mult, t_pll_ps;
 685                 int diff;
 686
 687                 /*
 688                  * Find the multiplier for this divisor
 689                  */
 690                 rr = ref_ps * t_div1;
 691                 t_mult = (rr + pll_ps / 2) / pll_ps;
 692
 693                 /*
 694                  * Is the multiplier within the correct range?
 695                  */
 696                 if (t_mult > 256 || t_mult < 2)
 697                         continue;
 698
 699                 /*
 700                  * Calculate the actual clock period from this multiplier
 701                  * and divisor, and estimate the error.
 702                  */
 703                 t_pll_ps = (rr + t_mult / 2) / t_mult;
 704                 diff = pll_ps - t_pll_ps;
 705                 if (diff < 0)
 706                         diff = -diff;
 707
 708                 if (diff < best_diff) {
 709                         best_diff = diff;
 710                         best_mult = t_mult;
 711                         best_div1 = t_div1;
 712                 }
 713
 714                 /*
 715                  * If we hit an exact value, there is no point in continuing.
 716                  */
 717                 if (diff == 0)
 718                         break;
 719         }
 720
 721         /*
 722          * Step 3:
 723          *  combine values
 724          */
 725         hw->clock_mult = best_mult - 1;
 726         hw->clock_div  = div2 << 6 | (best_div1 - 1);
 727
 728         vco = ref_ps * best_div1 / best_mult;
 729         if ((ref_ps == 40690) && (vco < 5556))
 730                 /* Set VFSEL when VCO > 180MHz (5.556 ps). */
 731                 hw->clock_div |= EXT_DCLK_DIV_VFSEL;
 732
 733         return 0;
 734 }
 735
 736 /*
 737  *    Set the User Defined Part of the Display
 738  */
 739 static int
 740 cyber2000fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 741 {
 742         struct cfb_info *cfb = (struct cfb_info *)info;
 743         struct par_info hw;
 744         unsigned int mem;
 745         int err;
 746
 747         var->transp.msb_right   = 0;
 748         var->red.msb_right      = 0;
 749         var->green.msb_right    = 0;
 750         var->blue.msb_right     = 0;
 751         var->transp.offset      = 0;
 752         var->transp.length      = 0;
 753
 754         switch (var->bits_per_pixel) {
 755         case 8: /* PSEUDOCOLOUR, 256 */
 756                 var->red.offset         = 0;
 757                 var->red.length         = 8;
 758                 var->green.offset       = 0;
 759                 var->green.length       = 8;
 760                 var->blue.offset        = 0;
 761                 var->blue.length        = 8;
 762                 break;
 763
 764         case 16:/* DIRECTCOLOUR, 64k or 32k */
 765                 switch (var->green.length) {
 766                 case 6: /* RGB565, 64k */
 767                         var->red.offset         = 11;
 768                         var->red.length         = 5;
 769                         var->green.offset       = 5;
 770                         var->green.length       = 6;
 771                         var->blue.offset        = 0;
 772                         var->blue.length        = 5;
 773                         break;
 774
 775                 default:
 776                 case 5: /* RGB555, 32k */
 777                         var->red.offset         = 10;
 778                         var->red.length         = 5;
 779                         var->green.offset       = 5;
 780                         var->green.length       = 5;
 781                         var->blue.offset        = 0;
 782                         var->blue.length        = 5;
 783                         break;
 784
 785                 case 4: /* RGB444, 4k + transparency? */
 786                         var->transp.offset      = 12;
 787                         var->transp.length      = 4;
 788                         var->red.offset         = 8;
 789                         var->red.length         = 4;
 790                         var->green.offset       = 4;
 791                         var->green.length       = 4;
 792                         var->blue.offset        = 0;
 793                         var->blue.length        = 4;
 794                         break;
 795                 }
 796                 break;
 797
 798         case 24:/* TRUECOLOUR, 16m */
 799                 var->red.offset         = 16;
 800                 var->red.length         = 8;
 801                 var->green.offset       = 8;
 802                 var->green.length       = 8;
 803                 var->blue.offset        = 0;
 804                 var->blue.length        = 8;
 805                 break;
 806
 807         case 32:/* TRUECOLOUR, 16m */
 808                 var->transp.offset      = 24;
 809                 var->transp.length      = 8;
 810                 var->red.offset         = 16;
 811                 var->red.length         = 8;
 812                 var->green.offset       = 8;
 813                 var->green.length       = 8;
 814                 var->blue.offset        = 0;
 815                 var->blue.length        = 8;
 816                 break;
 817
 818         default:
 819                 return -EINVAL;
 820         }
 821
 822         mem = var->xres_virtual * var->yres_virtual * (var->bits_per_pixel / 8);
 823         if (mem > cfb->fb.fix.smem_len)
 824                 var->yres_virtual = cfb->fb.fix.smem_len * 8 /
 825                                     (var->bits_per_pixel * var->xres_virtual);
 826
 827         if (var->yres > var->yres_virtual)
 828                 var->yres = var->yres_virtual;
 829         if (var->xres > var->xres_virtual)
 830                 var->xres = var->xres_virtual;
 831
 832         err = cyber2000fb_decode_clock(&hw, cfb, var);
 833         if (err)
 834                 return err;
 835
 836         err = cyber2000fb_decode_crtc(&hw, cfb, var);
 837         if (err)
 838                 return err;
 839
 840         return 0;
 841 }
 842
 843 static int cyber2000fb_set_par(struct fb_info *info)
 844 {
 845         struct cfb_info *cfb = (struct cfb_info *)info;
 846         struct fb_var_screeninfo *var = &cfb->fb.var;
 847         struct par_info hw;
 848         unsigned int mem;
 849
 850         hw.width = var->xres_virtual;
 851         hw.ramdac = RAMDAC_VREFEN | RAMDAC_DAC8BIT;
 852
 853         switch (var->bits_per_pixel) {
 854         case 8:
 855                 hw.co_pixfmt            = CO_PIXFMT_8BPP;
 856                 hw.pitch                = hw.width >> 3;
 857                 hw.extseqmisc           = EXT_SEQ_MISC_8;
 858                 break;
 859
 860         case 16:
 861                 hw.co_pixfmt            = CO_PIXFMT_16BPP;
 862                 hw.pitch                = hw.width >> 2;
 863
 864                 switch (var->green.length) {
 865                 case 6: /* RGB565, 64k */
 866                         hw.extseqmisc   = EXT_SEQ_MISC_16_RGB565;
 867                         break;
 868                 case 5: /* RGB555, 32k */
 869                         hw.extseqmisc   = EXT_SEQ_MISC_16_RGB555;
 870                         break;
 871                 case 4: /* RGB444, 4k + transparency? */
 872                         hw.extseqmisc   = EXT_SEQ_MISC_16_RGB444;
 873                         break;
 874                 default:
 875                         BUG();
 876                 }
 877                 break;
 878
 879         case 24:/* TRUECOLOUR, 16m */
 880                 hw.co_pixfmt            = CO_PIXFMT_24BPP;
 881                 hw.width                *= 3;
 882                 hw.pitch                = hw.width >> 3;
 883                 hw.ramdac               |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
 884                 hw.extseqmisc           = EXT_SEQ_MISC_24_RGB888;
 885                 break;
 886
 887         case 32:/* TRUECOLOUR, 16m */
 888                 hw.co_pixfmt            = CO_PIXFMT_32BPP;
 889                 hw.pitch                = hw.width >> 1;
 890                 hw.ramdac               |= (RAMDAC_BYPASS | RAMDAC_RAMPWRDN);
 891                 hw.extseqmisc           = EXT_SEQ_MISC_32;
 892                 break;
 893
 894         default:
 895                 BUG();
 896         }
 897
 898         /*
 899          * Sigh, this is absolutely disgusting, but caused by
 900          * the way the fbcon developers want to separate out
 901          * the "checking" and the "setting" of the video mode.
 902          *
 903          * If the mode is not suitable for the hardware here,
 904          * we can't prevent it being set by returning an error.
 905          *
 906          * In theory, since NetWinders contain just one VGA card,
 907          * we should never end up hitting this problem.
 908          */
 909         BUG_ON(cyber2000fb_decode_clock(&hw, cfb, var) != 0);
 910         BUG_ON(cyber2000fb_decode_crtc(&hw, cfb, var) != 0);
 911
 912         hw.width -= 1;
 913         hw.fetch = hw.pitch;
 914         if (!(cfb->mem_ctl2 & MEM_CTL2_64BIT))
 915                 hw.fetch <<= 1;
 916         hw.fetch += 1;
 917
 918         cfb->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8;
 919
 920         /*
 921          * Same here - if the size of the video mode exceeds the
 922          * available RAM, we can't prevent this mode being set.
 923          *
 924          * In theory, since NetWinders contain just one VGA card,
 925          * we should never end up hitting this problem.
 926          */
 927         mem = cfb->fb.fix.line_length * var->yres_virtual;
 928         BUG_ON(mem > cfb->fb.fix.smem_len);
 929
 930         /*
 931          * 8bpp displays are always pseudo colour.  16bpp and above
 932          * are direct colour or true colour, depending on whether
 933          * the RAMDAC palettes are bypassed.  (Direct colour has
 934          * palettes, true colour does not.)
 935          */
 936         if (var->bits_per_pixel == 8)
 937                 cfb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 938         else if (hw.ramdac & RAMDAC_BYPASS)
 939                 cfb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
 940         else
 941                 cfb->fb.fix.visual = FB_VISUAL_DIRECTCOLOR;
 942
 943         cyber2000fb_set_timing(cfb, &hw);
 944         cyber2000fb_update_start(cfb, var);
 945
 946         return 0;
 947 }
 948
 949 /*
 950  *    Pan or Wrap the Display
 951  */
 952 static int
 953 cyber2000fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 954 {
 955         struct cfb_info *cfb = (struct cfb_info *)info;
 956
 957         if (cyber2000fb_update_start(cfb, var))
 958                 return -EINVAL;
 959
 960         cfb->fb.var.xoffset = var->xoffset;
 961         cfb->fb.var.yoffset = var->yoffset;
 962
 963         if (var->vmode & FB_VMODE_YWRAP) {
 964                 cfb->fb.var.vmode |= FB_VMODE_YWRAP;
 965         } else {
 966                 cfb->fb.var.vmode &= ~FB_VMODE_YWRAP;
 967         }
 968
 969         return 0;
 970 }
 971
 972 /*
 973  *    (Un)Blank the display.
 974  *
 975  *  Blank the screen if blank_mode != 0, else unblank. If
 976  *  blank == NULL then the caller blanks by setting the CLUT
 977  *  (Color Look Up Table) to all black. Return 0 if blanking
 978  *  succeeded, != 0 if un-/blanking failed due to e.g. a
 979  *  video mode which doesn't support it. Implements VESA
 980  *  suspend and powerdown modes on hardware that supports
 981  *  disabling hsync/vsync:
 982  *    blank_mode == 2: suspend vsync
 983  *    blank_mode == 3: suspend hsync
 984  *    blank_mode == 4: powerdown
 985  *
 986  *  wms...Enable VESA DMPS compatible powerdown mode
 987  *  run "setterm -powersave powerdown" to take advantage
 988  */
 989 static int cyber2000fb_blank(int blank, struct fb_info *info)
 990 {
 991         struct cfb_info *cfb = (struct cfb_info *)info;
 992         unsigned int sync = 0;
 993         int i;
 994
 995         switch (blank) {
 996         case FB_BLANK_POWERDOWN:        /* powerdown - both sync lines down */
 997                 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_0;
 998                 break;
 999         case FB_BLANK_HSYNC_SUSPEND:    /* hsync off */
1000                 sync = EXT_SYNC_CTL_VS_NORMAL | EXT_SYNC_CTL_HS_0;
1001                 break;
1002         case FB_BLANK_VSYNC_SUSPEND:    /* vsync off */
1003                 sync = EXT_SYNC_CTL_VS_0 | EXT_SYNC_CTL_HS_NORMAL;
1004                 break;
1005         case FB_BLANK_NORMAL:           /* soft blank */
1006         default:                        /* unblank */
1007                 break;
1008         }
1009
1010         cyber2000_grphw(EXT_SYNC_CTL, sync, cfb);
1011
1012         if (blank <= 1) {
1013                 /* turn on ramdacs */
1014                 cfb->ramdac_powerdown &= ~(RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1015                                            RAMDAC_RAMPWRDN);
1016                 cyber2000fb_write_ramdac_ctrl(cfb);
1017         }
1018
1019         /*
1020          * Soft blank/unblank the display.
1021          */
1022         if (blank) {    /* soft blank */
1023                 for (i = 0; i < NR_PALETTE; i++) {
1024                         cyber2000fb_writeb(i, 0x3c8, cfb);
1025                         cyber2000fb_writeb(0, 0x3c9, cfb);
1026                         cyber2000fb_writeb(0, 0x3c9, cfb);
1027                         cyber2000fb_writeb(0, 0x3c9, cfb);
1028                 }
1029         } else {        /* unblank */
1030                 for (i = 0; i < NR_PALETTE; i++) {
1031                         cyber2000fb_writeb(i, 0x3c8, cfb);
1032                         cyber2000fb_writeb(cfb->palette[i].red, 0x3c9, cfb);
1033                         cyber2000fb_writeb(cfb->palette[i].green, 0x3c9, cfb);
1034                         cyber2000fb_writeb(cfb->palette[i].blue, 0x3c9, cfb);
1035                 }
1036         }
1037
1038         if (blank >= 2) {
1039                 /* turn off ramdacs */
1040                 cfb->ramdac_powerdown |= RAMDAC_DACPWRDN | RAMDAC_BYPASS |
1041                                          RAMDAC_RAMPWRDN;
1042                 cyber2000fb_write_ramdac_ctrl(cfb);
1043         }
1044
1045         return 0;
1046 }
1047
1048 static struct fb_ops cyber2000fb_ops = {
1049         .owner          = THIS_MODULE,
1050         .fb_check_var   = cyber2000fb_check_var,
1051         .fb_set_par     = cyber2000fb_set_par,
1052         .fb_setcolreg   = cyber2000fb_setcolreg,
1053         .fb_blank       = cyber2000fb_blank,
1054         .fb_pan_display = cyber2000fb_pan_display,
1055         .fb_fillrect    = cyber2000fb_fillrect,
1056         .fb_copyarea    = cyber2000fb_copyarea,
1057         .fb_imageblit   = cyber2000fb_imageblit,
1058         .fb_sync        = cyber2000fb_sync,
1059 };
1060
1061 /*
1062  * This is the only "static" reference to the internal data structures
1063  * of this driver.  It is here solely at the moment to support the other
1064  * CyberPro modules external to this driver.
1065  */
1066 static struct cfb_info *int_cfb_info;
1067
1068 /*
1069  * Enable access to the extended registers
1070  */
1071 void cyber2000fb_enable_extregs(struct cfb_info *cfb)
1072 {
1073         cfb->func_use_count += 1;
1074
1075         if (cfb->func_use_count == 1) {
1076                 int old;
1077
1078                 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1079                 old |= EXT_FUNC_CTL_EXTREGENBL;
1080                 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1081         }
1082 }
1083 EXPORT_SYMBOL(cyber2000fb_enable_extregs);
1084
1085 /*
1086  * Disable access to the extended registers
1087  */
1088 void cyber2000fb_disable_extregs(struct cfb_info *cfb)
1089 {
1090         if (cfb->func_use_count == 1) {
1091                 int old;
1092
1093                 old = cyber2000_grphr(EXT_FUNC_CTL, cfb);
1094                 old &= ~EXT_FUNC_CTL_EXTREGENBL;
1095                 cyber2000_grphw(EXT_FUNC_CTL, old, cfb);
1096         }
1097
1098         if (cfb->func_use_count == 0)
1099                 printk(KERN_ERR "disable_extregs: count = 0\n");
1100         else
1101                 cfb->func_use_count -= 1;
1102 }
1103 EXPORT_SYMBOL(cyber2000fb_disable_extregs);
1104
1105 void cyber2000fb_get_fb_var(struct cfb_info *cfb, struct fb_var_screeninfo *var)
1106 {
1107         memcpy(var, &cfb->fb.var, sizeof(struct fb_var_screeninfo));
1108 }
1109 EXPORT_SYMBOL(cyber2000fb_get_fb_var);
1110
1111 /*
1112  * Attach a capture/tv driver to the core CyberX0X0 driver.
1113  */
1114 int cyber2000fb_attach(struct cyberpro_info *info, int idx)
1115 {
1116         if (int_cfb_info != NULL) {
1117                 info->dev             = int_cfb_info->dev;
1118                 info->regs            = int_cfb_info->regs;
1119                 info->fb              = int_cfb_info->fb.screen_base;
1120                 info->fb_size         = int_cfb_info->fb.fix.smem_len;
1121                 info->enable_extregs  = cyber2000fb_enable_extregs;
1122                 info->disable_extregs = cyber2000fb_disable_extregs;
1123                 info->info            = int_cfb_info;
1124
1125                 strlcpy(info->dev_name, int_cfb_info->fb.fix.id,
1126                         sizeof(info->dev_name));
1127         }
1128
1129         return int_cfb_info != NULL;
1130 }
1131 EXPORT_SYMBOL(cyber2000fb_attach);
1132
1133 /*
1134  * Detach a capture/tv driver from the core CyberX0X0 driver.
1135  */
1136 void cyber2000fb_detach(int idx)
1137 {
1138 }
1139 EXPORT_SYMBOL(cyber2000fb_detach);
1140
1141 /*
1142  * These parameters give
1143  * 640x480, hsync 31.5kHz, vsync 60Hz
1144  */
1145 static struct fb_videomode __devinitdata cyber2000fb_default_mode = {
1146         .refresh        = 60,
1147         .xres           = 640,
1148         .yres           = 480,
1149         .pixclock       = 39722,
1150         .left_margin    = 56,
1151         .right_margin   = 16,
1152         .upper_margin   = 34,
1153         .lower_margin   = 9,
1154         .hsync_len      = 88,
1155         .vsync_len      = 2,
1156         .sync           = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
1157         .vmode          = FB_VMODE_NONINTERLACED
1158 };
1159
1160 static char igs_regs[] = {
1161         EXT_CRT_IRQ,            0,
1162         EXT_CRT_TEST,           0,
1163         EXT_SYNC_CTL,           0,
1164         EXT_SEG_WRITE_PTR,      0,
1165         EXT_SEG_READ_PTR,       0,
1166         EXT_BIU_MISC,           EXT_BIU_MISC_LIN_ENABLE |
1167                                 EXT_BIU_MISC_COP_ENABLE |
1168                                 EXT_BIU_MISC_COP_BFC,
1169         EXT_FUNC_CTL,           0,
1170         CURS_H_START,           0,
1171         CURS_H_START + 1,       0,
1172         CURS_H_PRESET,          0,
1173         CURS_V_START,           0,
1174         CURS_V_START + 1,       0,
1175         CURS_V_PRESET,          0,
1176         CURS_CTL,               0,
1177         EXT_ATTRIB_CTL,         EXT_ATTRIB_CTL_EXT,
1178         EXT_OVERSCAN_RED,       0,
1179         EXT_OVERSCAN_GREEN,     0,
1180         EXT_OVERSCAN_BLUE,      0,
1181
1182         /* some of these are questionable when we have a BIOS */
1183         EXT_MEM_CTL0,           EXT_MEM_CTL0_7CLK |
1184                                 EXT_MEM_CTL0_RAS_1 |
1185                                 EXT_MEM_CTL0_MULTCAS,
1186         EXT_HIDDEN_CTL1,        0x30,
1187         EXT_FIFO_CTL,           0x0b,
1188         EXT_FIFO_CTL + 1,       0x17,
1189         0x76,                   0x00,
1190         EXT_HIDDEN_CTL4,        0xc8
1191 };
1192
1193 /*
1194  * Initialise the CyberPro hardware.  On the CyberPro5XXXX,
1195  * ensure that we're using the correct PLL (5XXX's may be
1196  * programmed to use an additional set of PLLs.)
1197  */
1198 static void cyberpro_init_hw(struct cfb_info *cfb)
1199 {
1200         int i;
1201
1202         for (i = 0; i < sizeof(igs_regs); i += 2)
1203                 cyber2000_grphw(igs_regs[i], igs_regs[i + 1], cfb);
1204
1205         if (cfb->id == ID_CYBERPRO_5000) {
1206                 unsigned char val;
1207                 cyber2000fb_writeb(0xba, 0x3ce, cfb);
1208                 val = cyber2000fb_readb(0x3cf, cfb) & 0x80;
1209                 cyber2000fb_writeb(val, 0x3cf, cfb);
1210         }
1211 }
1212
1213 static struct cfb_info __devinit *cyberpro_alloc_fb_info(unsigned int id,
1214                                                          char *name)
1215 {
1216         struct cfb_info *cfb;
1217
1218         cfb = kzalloc(sizeof(struct cfb_info), GFP_KERNEL);
1219         if (!cfb)
1220                 return NULL;
1221
1222
1223         cfb->id                 = id;
1224
1225         if (id == ID_CYBERPRO_5000)
1226                 cfb->ref_ps     = 40690; /* 24.576 MHz */
1227         else
1228                 cfb->ref_ps     = 69842; /* 14.31818 MHz (69841?) */
1229
1230         cfb->divisors[0]        = 1;
1231         cfb->divisors[1]        = 2;
1232         cfb->divisors[2]        = 4;
1233
1234         if (id == ID_CYBERPRO_2000)
1235                 cfb->divisors[3] = 8;
1236         else
1237                 cfb->divisors[3] = 6;
1238
1239         strcpy(cfb->fb.fix.id, name);
1240
1241         cfb->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
1242         cfb->fb.fix.type_aux    = 0;
1243         cfb->fb.fix.xpanstep    = 0;
1244         cfb->fb.fix.ypanstep    = 1;
1245         cfb->fb.fix.ywrapstep   = 0;
1246
1247         switch (id) {
1248         case ID_IGA_1682:
1249                 cfb->fb.fix.accel = 0;
1250                 break;
1251
1252         case ID_CYBERPRO_2000:
1253                 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2000;
1254                 break;
1255
1256         case ID_CYBERPRO_2010:
1257                 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER2010;
1258                 break;
1259
1260         case ID_CYBERPRO_5000:
1261                 cfb->fb.fix.accel = FB_ACCEL_IGS_CYBER5000;
1262                 break;
1263         }
1264
1265         cfb->fb.var.nonstd      = 0;
1266         cfb->fb.var.activate    = FB_ACTIVATE_NOW;
1267         cfb->fb.var.height      = -1;
1268         cfb->fb.var.width       = -1;
1269         cfb->fb.var.accel_flags = FB_ACCELF_TEXT;
1270
1271         cfb->fb.fbops           = &cyber2000fb_ops;
1272         cfb->fb.flags           = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
1273         cfb->fb.pseudo_palette  = cfb->pseudo_palette;
1274
1275         fb_alloc_cmap(&cfb->fb.cmap, NR_PALETTE, 0);
1276
1277         return cfb;
1278 }
1279
1280 static void cyberpro_free_fb_info(struct cfb_info *cfb)
1281 {
1282         if (cfb) {
1283                 /*
1284                  * Free the colourmap
1285                  */
1286                 fb_alloc_cmap(&cfb->fb.cmap, 0, 0);
1287
1288                 kfree(cfb);
1289         }
1290 }
1291
1292 /*
1293  * Parse Cyber2000fb options.  Usage:
1294  *  video=cyber2000:font:fontname
1295  */
1296 #ifndef MODULE
1297 static int cyber2000fb_setup(char *options)
1298 {
1299         char *opt;
1300
1301         if (!options || !*options)
1302                 return 0;
1303
1304         while ((opt = strsep(&options, ",")) != NULL) {
1305                 if (!*opt)
1306                         continue;
1307
1308                 if (strncmp(opt, "font:", 5) == 0) {
1309                         static char default_font_storage[40];
1310
1311                         strlcpy(default_font_storage, opt + 5,
1312                                 sizeof(default_font_storage));
1313                         default_font = default_font_storage;
1314                         continue;
1315                 }
1316
1317                 printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
1318         }
1319         return 0;
1320 }
1321 #endif  /*  MODULE  */
1322
1323 /*
1324  * The CyberPro chips can be placed on many different bus types.
1325  * This probe function is common to all bus types.  The bus-specific
1326  * probe function is expected to have:
1327  *  - enabled access to the linear memory region
1328  *  - memory mapped access to the registers
1329  *  - initialised mem_ctl1 and mem_ctl2 appropriately.
1330  */
1331 static int __devinit cyberpro_common_probe(struct cfb_info *cfb)
1332 {
1333         u_long smem_size;
1334         u_int h_sync, v_sync;
1335         int err;
1336
1337         cyberpro_init_hw(cfb);
1338
1339         /*
1340          * Get the video RAM size and width from the VGA register.
1341          * This should have been already initialised by the BIOS,
1342          * but if it's garbage, claim default 1MB VRAM (woody)
1343          */
1344         cfb->mem_ctl1 = cyber2000_grphr(EXT_MEM_CTL1, cfb);
1345         cfb->mem_ctl2 = cyber2000_grphr(EXT_MEM_CTL2, cfb);
1346
1347         /*
1348          * Determine the size of the memory.
1349          */
1350         switch (cfb->mem_ctl2 & MEM_CTL2_SIZE_MASK) {
1351         case MEM_CTL2_SIZE_4MB:
1352                 smem_size = 0x00400000;
1353                 break;
1354         case MEM_CTL2_SIZE_2MB:
1355                 smem_size = 0x00200000;
1356                 break;
1357         case MEM_CTL2_SIZE_1MB:
1358                 smem_size = 0x00100000;
1359                 break;
1360         default:
1361                 smem_size = 0x00100000;
1362                 break;
1363         }
1364
1365         cfb->fb.fix.smem_len   = smem_size;
1366         cfb->fb.fix.mmio_len   = MMIO_SIZE;
1367         cfb->fb.screen_base    = cfb->region;
1368
1369         err = -EINVAL;
1370         if (!fb_find_mode(&cfb->fb.var, &cfb->fb, NULL, NULL, 0,
1371                           &cyber2000fb_default_mode, 8)) {
1372                 printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id);
1373                 goto failed;
1374         }
1375
1376         cfb->fb.var.yres_virtual = cfb->fb.fix.smem_len * 8 /
1377                         (cfb->fb.var.bits_per_pixel * cfb->fb.var.xres_virtual);
1378
1379         if (cfb->fb.var.yres_virtual < cfb->fb.var.yres)
1380                 cfb->fb.var.yres_virtual = cfb->fb.var.yres;
1381
1382 /*      fb_set_var(&cfb->fb.var, -1, &cfb->fb); */
1383
1384         /*
1385          * Calculate the hsync and vsync frequencies.  Note that
1386          * we split the 1e12 constant up so that we can preserve
1387          * the precision and fit the results into 32-bit registers.
1388          *  (1953125000 * 512 = 1e12)
1389          */
1390         h_sync = 1953125000 / cfb->fb.var.pixclock;
1391         h_sync = h_sync * 512 / (cfb->fb.var.xres + cfb->fb.var.left_margin +
1392                  cfb->fb.var.right_margin + cfb->fb.var.hsync_len);
1393         v_sync = h_sync / (cfb->fb.var.yres + cfb->fb.var.upper_margin +
1394                  cfb->fb.var.lower_margin + cfb->fb.var.vsync_len);
1395
1396         printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
1397                 cfb->fb.fix.id, cfb->fb.fix.smem_len >> 10,
1398                 cfb->fb.var.xres, cfb->fb.var.yres,
1399                 h_sync / 1000, h_sync % 1000, v_sync);
1400
1401         if (cfb->dev)
1402                 cfb->fb.device = &cfb->dev->dev;
1403         err = register_framebuffer(&cfb->fb);
1404
1405 failed:
1406         return err;
1407 }
1408
1409 static void cyberpro_common_resume(struct cfb_info *cfb)
1410 {
1411         cyberpro_init_hw(cfb);
1412
1413         /*
1414          * Reprogram the MEM_CTL1 and MEM_CTL2 registers
1415          */
1416         cyber2000_grphw(EXT_MEM_CTL1, cfb->mem_ctl1, cfb);
1417         cyber2000_grphw(EXT_MEM_CTL2, cfb->mem_ctl2, cfb);
1418
1419         /*
1420          * Restore the old video mode and the palette.
1421          * We also need to tell fbcon to redraw the console.
1422          */
1423         cyber2000fb_set_par(&cfb->fb);
1424 }
1425
1426 #ifdef CONFIG_ARCH_SHARK
1427
1428 #include <mach/framebuffer.h>
1429
1430 static int __devinit cyberpro_vl_probe(void)
1431 {
1432         struct cfb_info *cfb;
1433         int err = -ENOMEM;
1434
1435         if (!request_mem_region(FB_START, FB_SIZE, "CyberPro2010"))
1436                 return err;
1437
1438         cfb = cyberpro_alloc_fb_info(ID_CYBERPRO_2010, "CyberPro2010");
1439         if (!cfb)
1440                 goto failed_release;
1441
1442         cfb->dev = NULL;
1443         cfb->region = ioremap(FB_START, FB_SIZE);
1444         if (!cfb->region)
1445                 goto failed_ioremap;
1446
1447         cfb->regs = cfb->region + MMIO_OFFSET;
1448         cfb->fb.fix.mmio_start = FB_START + MMIO_OFFSET;
1449         cfb->fb.fix.smem_start = FB_START;
1450
1451         /*
1452          * Bring up the hardware.  This is expected to enable access
1453          * to the linear memory region, and allow access to the memory
1454          * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
1455          * initialised.
1456          */
1457         cyber2000fb_writeb(0x18, 0x46e8, cfb);
1458         cyber2000fb_writeb(0x01, 0x102, cfb);
1459         cyber2000fb_writeb(0x08, 0x46e8, cfb);
1460         cyber2000fb_writeb(EXT_BIU_MISC, 0x3ce, cfb);
1461         cyber2000fb_writeb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf, cfb);
1462
1463         cfb->mclk_mult = 0xdb;
1464         cfb->mclk_div  = 0x54;
1465
1466         err = cyberpro_common_probe(cfb);
1467         if (err)
1468                 goto failed;
1469
1470         if (int_cfb_info == NULL)
1471                 int_cfb_info = cfb;
1472
1473         return 0;
1474
1475 failed:
1476         iounmap(cfb->region);
1477 failed_ioremap:
1478         cyberpro_free_fb_info(cfb);
1479 failed_release:
1480         release_mem_region(FB_START, FB_SIZE);
1481
1482         return err;
1483 }
1484 #endif /* CONFIG_ARCH_SHARK */
1485
1486 /*
1487  * PCI specific support.
1488  */
1489 #ifdef CONFIG_PCI
1490 /*
1491  * We need to wake up the CyberPro, and make sure its in linear memory
1492  * mode.  Unfortunately, this is specific to the platform and card that
1493  * we are running on.
1494  *
1495  * On x86 and ARM, should we be initialising the CyberPro first via the
1496  * IO registers, and then the MMIO registers to catch all cases?  Can we
1497  * end up in the situation where the chip is in MMIO mode, but not awake
1498  * on an x86 system?
1499  */
1500 static int cyberpro_pci_enable_mmio(struct cfb_info *cfb)
1501 {
1502         unsigned char val;
1503
1504 #if defined(__sparc_v9__)
1505 #error "You lose, consult DaveM."
1506 #elif defined(__sparc__)
1507         /*
1508          * SPARC does not have an "outb" instruction, so we generate
1509          * I/O cycles storing into a reserved memory space at
1510          * physical address 0x3000000
1511          */
1512         unsigned char __iomem *iop;
1513
1514         iop = ioremap(0x3000000, 0x5000);
1515         if (iop == NULL) {
1516                 printk(KERN_ERR "iga5000: cannot map I/O\n");
1517                 return -ENOMEM;
1518         }
1519
1520         writeb(0x18, iop + 0x46e8);
1521         writeb(0x01, iop + 0x102);
1522         writeb(0x08, iop + 0x46e8);
1523         writeb(EXT_BIU_MISC, iop + 0x3ce);
1524         writeb(EXT_BIU_MISC_LIN_ENABLE, iop + 0x3cf);
1525
1526         iounmap(iop);
1527 #else
1528         /*
1529          * Most other machine types are "normal", so
1530          * we use the standard IO-based wakeup.
1531          */
1532         outb(0x18, 0x46e8);
1533         outb(0x01, 0x102);
1534         outb(0x08, 0x46e8);
1535         outb(EXT_BIU_MISC, 0x3ce);
1536         outb(EXT_BIU_MISC_LIN_ENABLE, 0x3cf);
1537 #endif
1538
1539         /*
1540          * Allow the CyberPro to accept PCI burst accesses
1541          */
1542         if (cfb->id == ID_CYBERPRO_2010) {
1543                 printk(KERN_INFO "%s: NOT enabling PCI bursts\n",
1544                        cfb->fb.fix.id);
1545         } else {
1546                 val = cyber2000_grphr(EXT_BUS_CTL, cfb);
1547                 if (!(val & EXT_BUS_CTL_PCIBURST_WRITE)) {
1548                         printk(KERN_INFO "%s: enabling PCI bursts\n",
1549                                 cfb->fb.fix.id);
1550
1551                         val |= EXT_BUS_CTL_PCIBURST_WRITE;
1552
1553                         if (cfb->id == ID_CYBERPRO_5000)
1554                                 val |= EXT_BUS_CTL_PCIBURST_READ;
1555
1556                         cyber2000_grphw(EXT_BUS_CTL, val, cfb);
1557                 }
1558         }
1559
1560         return 0;
1561 }
1562
1563 static int __devinit
1564 cyberpro_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
1565 {
1566         struct cfb_info *cfb;
1567         char name[16];
1568         int err;
1569
1570         sprintf(name, "CyberPro%4X", id->device);
1571
1572         err = pci_enable_device(dev);
1573         if (err)
1574                 return err;
1575
1576         err = pci_request_regions(dev, name);
1577         if (err)
1578                 return err;
1579
1580         err = -ENOMEM;
1581         cfb = cyberpro_alloc_fb_info(id->driver_data, name);
1582         if (!cfb)
1583                 goto failed_release;
1584
1585         cfb->dev = dev;
1586         cfb->region = pci_ioremap_bar(dev, 0);
1587         if (!cfb->region)
1588                 goto failed_ioremap;
1589
1590         cfb->regs = cfb->region + MMIO_OFFSET;
1591         cfb->fb.fix.mmio_start = pci_resource_start(dev, 0) + MMIO_OFFSET;
1592         cfb->fb.fix.smem_start = pci_resource_start(dev, 0);
1593
1594         /*
1595          * Bring up the hardware.  This is expected to enable access
1596          * to the linear memory region, and allow access to the memory
1597          * mapped registers.  Also, mem_ctl1 and mem_ctl2 must be
1598          * initialised.
1599          */
1600         err = cyberpro_pci_enable_mmio(cfb);
1601         if (err)
1602                 goto failed;
1603
1604         /*
1605          * Use MCLK from BIOS. FIXME: what about hotplug?
1606          */
1607         cfb->mclk_mult = cyber2000_grphr(EXT_MCLK_MULT, cfb);
1608         cfb->mclk_div  = cyber2000_grphr(EXT_MCLK_DIV, cfb);
1609
1610 #ifdef __arm__
1611         /*
1612          * MCLK on the NetWinder and the Shark is fixed at 75MHz
1613          */
1614         if (machine_is_netwinder()) {
1615                 cfb->mclk_mult = 0xdb;
1616                 cfb->mclk_div  = 0x54;
1617         }
1618 #endif
1619
1620         err = cyberpro_common_probe(cfb);
1621         if (err)
1622                 goto failed;
1623
1624         /*
1625          * Our driver data
1626          */
1627         pci_set_drvdata(dev, cfb);
1628         if (int_cfb_info == NULL)
1629                 int_cfb_info = cfb;
1630
1631         return 0;
1632
1633 failed:
1634         iounmap(cfb->region);
1635 failed_ioremap:
1636         cyberpro_free_fb_info(cfb);
1637 failed_release:
1638         pci_release_regions(dev);
1639
1640         return err;
1641 }
1642
1643 static void __devexit cyberpro_pci_remove(struct pci_dev *dev)
1644 {
1645         struct cfb_info *cfb = pci_get_drvdata(dev);
1646
1647         if (cfb) {
1648                 /*
1649                  * If unregister_framebuffer fails, then
1650                  * we will be leaving hooks that could cause
1651                  * oopsen laying around.
1652                  */
1653                 if (unregister_framebuffer(&cfb->fb))
1654                         printk(KERN_WARNING "%s: danger Will Robinson, "
1655                                 "danger danger!  Oopsen imminent!\n",
1656                                 cfb->fb.fix.id);
1657                 iounmap(cfb->region);
1658                 cyberpro_free_fb_info(cfb);
1659
1660                 /*
1661                  * Ensure that the driver data is no longer
1662                  * valid.
1663                  */
1664                 pci_set_drvdata(dev, NULL);
1665                 if (cfb == int_cfb_info)
1666                         int_cfb_info = NULL;
1667
1668                 pci_release_regions(dev);
1669         }
1670 }
1671
1672 static int cyberpro_pci_suspend(struct pci_dev *dev, pm_message_t state)
1673 {
1674         return 0;
1675 }
1676
1677 /*
1678  * Re-initialise the CyberPro hardware
1679  */
1680 static int cyberpro_pci_resume(struct pci_dev *dev)
1681 {
1682         struct cfb_info *cfb = pci_get_drvdata(dev);
1683
1684         if (cfb) {
1685                 cyberpro_pci_enable_mmio(cfb);
1686                 cyberpro_common_resume(cfb);
1687         }
1688
1689         return 0;
1690 }
1691
1692 static struct pci_device_id cyberpro_pci_table[] = {
1693 /*      Not yet
1694  *      { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_1682,
1695  *              PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_IGA_1682 },
1696  */
1697         { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2000,
1698                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2000 },
1699         { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_2010,
1700                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_2010 },
1701         { PCI_VENDOR_ID_INTERG, PCI_DEVICE_ID_INTERG_5000,
1702                 PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_CYBERPRO_5000 },
1703         { 0, }
1704 };
1705
1706 MODULE_DEVICE_TABLE(pci, cyberpro_pci_table);
1707
1708 static struct pci_driver cyberpro_driver = {
1709         .name           = "CyberPro",
1710         .probe          = cyberpro_pci_probe,
1711         .remove         = __devexit_p(cyberpro_pci_remove),
1712         .suspend        = cyberpro_pci_suspend,
1713         .resume         = cyberpro_pci_resume,
1714         .id_table       = cyberpro_pci_table
1715 };
1716 #endif
1717
1718 /*
1719  * I don't think we can use the "module_init" stuff here because
1720  * the fbcon stuff may not be initialised yet.  Hence the #ifdef
1721  * around module_init.
1722  *
1723  * Tony: "module_init" is now required
1724  */
1725 static int __init cyber2000fb_init(void)
1726 {
1727         int ret = -1, err;
1728
1729 #ifndef MODULE
1730         char *option = NULL;
1731
1732         if (fb_get_options("cyber2000fb", &option))
1733                 return -ENODEV;
1734         cyber2000fb_setup(option);
1735 #endif
1736
1737 #ifdef CONFIG_ARCH_SHARK
1738         err = cyberpro_vl_probe();
1739         if (!err) {
1740                 ret = 0;
1741                 __module_get(THIS_MODULE);
1742         }
1743 #endif
1744 #ifdef CONFIG_PCI
1745         err = pci_register_driver(&cyberpro_driver);
1746         if (!err)
1747                 ret = 0;
1748 #endif
1749
1750         return ret ? err : 0;
1751 }
1752
1753 static void __exit cyberpro_exit(void)
1754 {
1755         pci_unregister_driver(&cyberpro_driver);
1756 }
1757
1758 module_init(cyber2000fb_init);
1759 module_exit(cyberpro_exit);
1760
1761 MODULE_AUTHOR("Russell King");
1762 MODULE_DESCRIPTION("CyberPro 2000, 2010 and 5000 framebuffer driver");
1763 MODULE_LICENSE("GPL");