2 * linux/arch/arm/mach-pxa/lubbock.c
4 * Support for the Intel DBPXA250 Development Platform.
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
21 #include <linux/interrupt.h>
23 #include <asm/setup.h>
24 #include <asm/memory.h>
25 #include <asm/mach-types.h>
26 #include <asm/hardware.h>
29 #include <asm/mach/arch.h>
30 #include <asm/mach/map.h>
31 #include <asm/mach/irq.h>
33 #include <asm/hardware/sa1111.h>
35 #include <asm/arch/pxa-regs.h>
36 #include <asm/arch/lubbock.h>
37 #include <asm/arch/udc.h>
38 #include <asm/arch/irda.h>
39 #include <asm/arch/pxafb.h>
40 #include <asm/arch/mmc.h>
45 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
47 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
51 local_irq_save(flags);
52 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
53 local_irq_restore(flags);
55 EXPORT_SYMBOL(lubbock_set_misc_wr);
57 static unsigned long lubbock_irq_enabled;
59 static void lubbock_mask_irq(unsigned int irq)
61 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
62 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
65 static void lubbock_unmask_irq(unsigned int irq)
67 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
68 /* the irq can be acknowledged only if deasserted, so it's done here */
69 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
70 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
73 static struct irqchip lubbock_irq_chip = {
74 .ack = lubbock_mask_irq,
75 .mask = lubbock_mask_irq,
76 .unmask = lubbock_unmask_irq,
79 static void lubbock_irq_handler(unsigned int irq, struct irqdesc *desc,
82 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
84 GEDR(0) = GPIO_bit(0); /* clear our parent irq */
85 if (likely(pending)) {
86 irq = LUBBOCK_IRQ(0) + __ffs(pending);
87 desc = irq_desc + irq;
88 desc_handle_irq(irq, desc, regs);
90 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
94 static void __init lubbock_init_irq(void)
100 /* setup extra lubbock irqs */
101 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
102 set_irq_chip(irq, &lubbock_irq_chip);
103 set_irq_handler(irq, do_level_IRQ);
104 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
107 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
108 set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
113 static int lubbock_irq_resume(struct sys_device *dev)
115 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
119 static struct sysdev_class lubbock_irq_sysclass = {
120 set_kset_name("cpld_irq"),
121 .resume = lubbock_irq_resume,
124 static struct sys_device lubbock_irq_device = {
125 .cls = &lubbock_irq_sysclass,
128 static int __init lubbock_irq_device_init(void)
130 int ret = sysdev_class_register(&lubbock_irq_sysclass);
132 ret = sysdev_register(&lubbock_irq_device);
136 device_initcall(lubbock_irq_device_init);
140 static int lubbock_udc_is_connected(void)
142 return (LUB_MISC_RD & (1 << 9)) == 0;
145 static struct pxa2xx_udc_mach_info udc_info __initdata = {
146 .udc_is_connected = lubbock_udc_is_connected,
147 // no D+ pullup; lubbock can't connect/disconnect in software
150 static struct platform_device lub_audio_device = {
151 .name = "pxa2xx-ac97",
155 static struct resource sa1111_resources[] = {
159 .flags = IORESOURCE_MEM,
162 .start = LUBBOCK_SA1111_IRQ,
163 .end = LUBBOCK_SA1111_IRQ,
164 .flags = IORESOURCE_IRQ,
168 static struct platform_device sa1111_device = {
171 .num_resources = ARRAY_SIZE(sa1111_resources),
172 .resource = sa1111_resources,
175 static struct resource smc91x_resources[] = {
177 .name = "smc91x-regs",
180 .flags = IORESOURCE_MEM,
183 .start = LUBBOCK_ETH_IRQ,
184 .end = LUBBOCK_ETH_IRQ,
185 .flags = IORESOURCE_IRQ,
188 .name = "smc91x-attrib",
191 .flags = IORESOURCE_MEM,
195 static struct platform_device smc91x_device = {
198 .num_resources = ARRAY_SIZE(smc91x_resources),
199 .resource = smc91x_resources,
202 static struct platform_device *devices[] __initdata = {
208 static struct pxafb_mach_info sharp_lm8v31 __initdata = {
219 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
224 .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
227 static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data)
229 /* setup GPIO for PXA25x MMC controller */
230 pxa_gpio_mode(GPIO6_MMCCLK_MD);
231 pxa_gpio_mode(GPIO8_MMCCS0_MD);
236 static struct pxamci_platform_data lubbock_mci_platform_data = {
237 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
238 .init = lubbock_mci_init,
241 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
245 local_irq_save(flags);
246 if (mode & IR_SIRMODE) {
247 LUB_MISC_WR &= ~(1 << 4);
248 } else if (mode & IR_FIRMODE) {
249 LUB_MISC_WR |= 1 << 4;
251 local_irq_restore(flags);
254 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
255 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
256 .transceiver_mode = lubbock_irda_transceiver_mode,
259 static void __init lubbock_init(void)
261 pxa_set_udc_info(&udc_info);
262 set_pxa_fb_info(&sharp_lm8v31);
263 pxa_set_mci_info(&lubbock_mci_platform_data);
264 pxa_set_ficp_info(&lubbock_ficp_platform_data);
265 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
268 static struct map_desc lubbock_io_desc[] __initdata = {
270 .virtual = LUBBOCK_FPGA_VIRT,
271 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
272 .length = 0x00100000,
277 static void __init lubbock_map_io(void)
280 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
282 /* This enables the BTUART */
283 pxa_gpio_mode(GPIO42_BTRXD_MD);
284 pxa_gpio_mode(GPIO43_BTTXD_MD);
285 pxa_gpio_mode(GPIO44_BTCTS_MD);
286 pxa_gpio_mode(GPIO45_BTRTS_MD);
288 /* This is for the SMC chip select */
289 pxa_gpio_mode(GPIO79_nCS_3_MD);
291 /* setup sleep mode values */
301 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
302 /* Maintainer: MontaVista Software Inc. */
303 .phys_ram = 0xa0000000,
304 .phys_io = 0x40000000,
305 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
306 .map_io = lubbock_map_io,
307 .init_irq = lubbock_init_irq,
309 .init_machine = lubbock_init,