2 * linux/arch/arm/mm/arm940.S: utility functions for ARM940T
4 * Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/linkage.h>
12 #include <linux/init.h>
13 #include <asm/assembler.h>
14 #include <asm/hwcap.h>
15 #include <asm/pgtable-hwdef.h>
16 #include <asm/pgtable.h>
17 #include <asm/ptrace.h>
18 #include "proc-macros.S"
20 /* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
21 #define CACHE_DLINESIZE 16
22 #define CACHE_DSEGMENTS 4
23 #define CACHE_DENTRIES 64
27 * cpu_arm940_proc_init()
28 * cpu_arm940_switch_mm()
30 * These are not required.
32 ENTRY(cpu_arm940_proc_init)
33 ENTRY(cpu_arm940_switch_mm)
37 * cpu_arm940_proc_fin()
39 ENTRY(cpu_arm940_proc_fin)
41 mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
43 bl arm940_flush_kern_cache_all
44 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
45 bic r0, r0, #0x00001000 @ i-cache
46 bic r0, r0, #0x00000004 @ d-cache
47 mcr p15, 0, r0, c1, c0, 0 @ disable caches
51 * cpu_arm940_reset(loc)
52 * Params : r0 = address to jump to
53 * Notes : This sets up everything for a reset
55 ENTRY(cpu_arm940_reset)
57 mcr p15, 0, ip, c7, c5, 0 @ flush I cache
58 mcr p15, 0, ip, c7, c6, 0 @ flush D cache
59 mcr p15, 0, ip, c7, c10, 4 @ drain WB
60 mrc p15, 0, ip, c1, c0, 0 @ ctrl register
61 bic ip, ip, #0x00000005 @ .............c.p
62 bic ip, ip, #0x00001000 @ i-cache
63 mcr p15, 0, ip, c1, c0, 0 @ ctrl register
67 * cpu_arm940_do_idle()
70 ENTRY(cpu_arm940_do_idle)
71 mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
75 * flush_user_cache_all()
77 ENTRY(arm940_flush_user_cache_all)
81 * flush_kern_cache_all()
83 * Clean and invalidate the entire cache.
85 ENTRY(arm940_flush_kern_cache_all)
90 * flush_user_cache_range(start, end, flags)
92 * There is no efficient way to flush a range of cache entries
93 * in the specified address range. Thus, flushes all.
95 * - start - start address (inclusive)
96 * - end - end address (exclusive)
97 * - flags - vm_flags describing address space
99 ENTRY(arm940_flush_user_cache_range)
101 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
102 mcr p15, 0, ip, c7, c6, 0 @ flush D cache
104 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
105 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
106 2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
107 subs r3, r3, #1 << 26
108 bcs 2b @ entries 63 to 0
110 bcs 1b @ segments 3 to 0
113 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
114 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
118 * coherent_kern_range(start, end)
120 * Ensure coherency between the Icache and the Dcache in the
121 * region described by start, end. If you have non-snooping
122 * Harvard caches, you need to implement this function.
124 * - start - virtual start address
125 * - end - virtual end address
127 ENTRY(arm940_coherent_kern_range)
131 * coherent_user_range(start, end)
133 * Ensure coherency between the Icache and the Dcache in the
134 * region described by start, end. If you have non-snooping
135 * Harvard caches, you need to implement this function.
137 * - start - virtual start address
138 * - end - virtual end address
140 ENTRY(arm940_coherent_user_range)
144 * flush_kern_dcache_page(void *page)
146 * Ensure no D cache aliasing occurs, either with itself or
149 * - addr - page aligned address
151 ENTRY(arm940_flush_kern_dcache_page)
153 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
154 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
155 2: mcr p15, 0, r3, c7, c14, 2 @ clean/flush D index
156 subs r3, r3, #1 << 26
157 bcs 2b @ entries 63 to 0
159 bcs 1b @ segments 7 to 0
160 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
161 mcr p15, 0, ip, c7, c10, 4 @ drain WB
165 * dma_inv_range(start, end)
167 * There is no efficient way to invalidate a specifid virtual
168 * address range. Thus, invalidates all.
170 * - start - virtual start address
171 * - end - virtual end address
173 ENTRY(arm940_dma_inv_range)
175 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
176 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
177 2: mcr p15, 0, r3, c7, c6, 2 @ flush D entry
178 subs r3, r3, #1 << 26
179 bcs 2b @ entries 63 to 0
181 bcs 1b @ segments 7 to 0
182 mcr p15, 0, ip, c7, c10, 4 @ drain WB
186 * dma_clean_range(start, end)
188 * There is no efficient way to clean a specifid virtual
189 * address range. Thus, cleans all.
191 * - start - virtual start address
192 * - end - virtual end address
194 ENTRY(arm940_dma_clean_range)
195 ENTRY(cpu_arm940_dcache_clean_area)
197 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
198 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
199 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
200 2: mcr p15, 0, r3, c7, c10, 2 @ clean D entry
201 subs r3, r3, #1 << 26
202 bcs 2b @ entries 63 to 0
204 bcs 1b @ segments 7 to 0
206 mcr p15, 0, ip, c7, c10, 4 @ drain WB
210 * dma_flush_range(start, end)
212 * There is no efficient way to clean and invalidate a specifid
213 * virtual address range.
215 * - start - virtual start address
216 * - end - virtual end address
218 ENTRY(arm940_dma_flush_range)
220 mov r1, #(CACHE_DSEGMENTS - 1) << 4 @ 4 segments
221 1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
223 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
224 mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
226 mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry
228 subs r3, r3, #1 << 26
229 bcs 2b @ entries 63 to 0
231 bcs 1b @ segments 7 to 0
232 mcr p15, 0, ip, c7, c10, 4 @ drain WB
235 ENTRY(arm940_cache_fns)
236 .long arm940_flush_kern_cache_all
237 .long arm940_flush_user_cache_all
238 .long arm940_flush_user_cache_range
239 .long arm940_coherent_kern_range
240 .long arm940_coherent_user_range
241 .long arm940_flush_kern_dcache_page
242 .long arm940_dma_inv_range
243 .long arm940_dma_clean_range
244 .long arm940_dma_flush_range
248 .type __arm940_setup, #function
251 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
252 mcr p15, 0, r0, c7, c6, 0 @ invalidate D cache
253 mcr p15, 0, r0, c7, c10, 4 @ drain WB
255 mcr p15, 0, r0, c6, c3, 0 @ disable data area 3~7
256 mcr p15, 0, r0, c6, c4, 0
257 mcr p15, 0, r0, c6, c5, 0
258 mcr p15, 0, r0, c6, c6, 0
259 mcr p15, 0, r0, c6, c7, 0
261 mcr p15, 0, r0, c6, c3, 1 @ disable instruction area 3~7
262 mcr p15, 0, r0, c6, c4, 1
263 mcr p15, 0, r0, c6, c5, 1
264 mcr p15, 0, r0, c6, c6, 1
265 mcr p15, 0, r0, c6, c7, 1
267 mov r0, #0x0000003F @ base = 0, size = 4GB
268 mcr p15, 0, r0, c6, c0, 0 @ set area 0, default
269 mcr p15, 0, r0, c6, c0, 1
271 ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
272 ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
273 mov r2, #10 @ 11 is the minimum (4KB)
274 1: add r2, r2, #1 @ area size *= 2
276 bne 1b @ count not zero r-shift
277 orr r0, r0, r2, lsl #1 @ the area register value
278 orr r0, r0, #1 @ set enable bit
279 mcr p15, 0, r0, c6, c1, 0 @ set area 1, RAM
280 mcr p15, 0, r0, c6, c1, 1
282 ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
283 ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
284 mov r2, #10 @ 11 is the minimum (4KB)
285 1: add r2, r2, #1 @ area size *= 2
287 bne 1b @ count not zero r-shift
288 orr r0, r0, r2, lsl #1 @ the area register value
289 orr r0, r0, #1 @ set enable bit
290 mcr p15, 0, r0, c6, c2, 0 @ set area 2, ROM/FLASH
291 mcr p15, 0, r0, c6, c2, 1
294 mcr p15, 0, r0, c2, c0, 0 @ Region 1&2 cacheable
295 mcr p15, 0, r0, c2, c0, 1
296 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
297 mov r0, #0x00 @ disable whole write buffer
299 mov r0, #0x02 @ Region 1 write bufferred
301 mcr p15, 0, r0, c3, c0, 0
304 sub r0, r0, #1 @ r0 = 0xffff
305 mcr p15, 0, r0, c5, c0, 0 @ all read/write access
306 mcr p15, 0, r0, c5, c0, 1
308 mrc p15, 0, r0, c1, c0 @ get control register
309 orr r0, r0, #0x00001000 @ I-cache
310 orr r0, r0, #0x00000005 @ MPU/D-cache
314 .size __arm940_setup, . - __arm940_setup
319 * Purpose : Function pointers used to access above functions - all calls
322 .type arm940_processor_functions, #object
323 ENTRY(arm940_processor_functions)
324 .word nommu_early_abort
326 .word cpu_arm940_proc_init
327 .word cpu_arm940_proc_fin
328 .word cpu_arm940_reset
329 .word cpu_arm940_do_idle
330 .word cpu_arm940_dcache_clean_area
331 .word cpu_arm940_switch_mm
332 .word 0 @ cpu_*_set_pte
333 .size arm940_processor_functions, . - arm940_processor_functions
337 .type cpu_arch_name, #object
340 .size cpu_arch_name, . - cpu_arch_name
342 .type cpu_elf_name, #object
345 .size cpu_elf_name, . - cpu_elf_name
347 .type cpu_arm940_name, #object
350 .size cpu_arm940_name, . - cpu_arm940_name
354 .section ".proc.info.init", #alloc, #execinstr
356 .type __arm940_proc_info,#object
364 .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
365 .long cpu_arm940_name
366 .long arm940_processor_functions
369 .long arm940_cache_fns
370 .size __arm940_proc_info, . - __arm940_proc_info