git.oblomov.eu Git - linux-2.6/blob - drivers/char/rio/riointr.c

   1 /*
   2 ** -----------------------------------------------------------------------------
   3 **
   4 **  Perle Specialix driver for Linux
   5 **  Ported from existing RIO Driver for SCO sources.
   6  *
   7  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  *      This program is distributed in the hope that it will be useful,
  15  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *      GNU General Public License for more details.
  18  *
  19  *      You should have received a copy of the GNU General Public License
  20  *      along with this program; if not, write to the Free Software
  21  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22 **
  23 **      Module          : riointr.c
  24 **      SID             : 1.2
  25 **      Last Modified   : 11/6/98 10:33:44
  26 **      Retrieved       : 11/6/98 10:33:49
  27 **
  28 **  ident @(#)riointr.c 1.2
  29 **
  30 ** -----------------------------------------------------------------------------
  31 */
  32
  33 #include <linux/module.h>
  34 #include <linux/slab.h>
  35 #include <linux/errno.h>
  36 #include <linux/tty.h>
  37 #include <linux/tty_flip.h>
  38 #include <asm/io.h>
  39 #include <asm/system.h>
  40 #include <asm/string.h>
  41 #include <asm/uaccess.h>
  42
  43 #include <linux/termios.h>
  44 #include <linux/serial.h>
  45
  46 #include <linux/generic_serial.h>
  47
  48 #include <linux/delay.h>
  49
  50 #include "linux_compat.h"
  51 #include "rio_linux.h"
  52 #include "pkt.h"
  53 #include "daemon.h"
  54 #include "rio.h"
  55 #include "riospace.h"
  56 #include "cmdpkt.h"
  57 #include "map.h"
  58 #include "rup.h"
  59 #include "port.h"
  60 #include "riodrvr.h"
  61 #include "rioinfo.h"
  62 #include "func.h"
  63 #include "errors.h"
  64 #include "pci.h"
  65
  66 #include "parmmap.h"
  67 #include "unixrup.h"
  68 #include "board.h"
  69 #include "host.h"
  70 #include "phb.h"
  71 #include "link.h"
  72 #include "cmdblk.h"
  73 #include "route.h"
  74 #include "cirrus.h"
  75 #include "rioioctl.h"
  76
  77
  78 static void RIOReceive(struct rio_info *, struct Port *);
  79
  80
  81 static char *firstchars(char *p, int nch)
  82 {
  83         static char buf[2][128];
  84         static int t = 0;
  85         t = !t;
  86         memcpy(buf[t], p, nch);
  87         buf[t][nch] = 0;
  88         return buf[t];
  89 }
  90
  91
  92 #define INCR( P, I )    ((P) = (((P)+(I)) & p->RIOBufferMask))
  93 /* Enable and start the transmission of packets */
  94 void RIOTxEnable(char *en)
  95 {
  96         struct Port *PortP;
  97         struct rio_info *p;
  98         struct tty_struct *tty;
  99         int c;
 100         struct PKT __iomem *PacketP;
 101         unsigned long flags;
 102
 103         PortP = (struct Port *) en;
 104         p = (struct rio_info *) PortP->p;
 105         tty = PortP->gs.port.tty;
 106
 107
 108         rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt);
 109
 110         if (!PortP->gs.xmit_cnt)
 111                 return;
 112
 113
 114         /* This routine is an order of magnitude simpler than the specialix
 115            version. One of the disadvantages is that this version will send
 116            an incomplete packet (usually 64 bytes instead of 72) once for
 117            every 4k worth of data. Let's just say that this won't influence
 118            performance significantly..... */
 119
 120         rio_spin_lock_irqsave(&PortP->portSem, flags);
 121
 122         while (can_add_transmit(&PacketP, PortP)) {
 123                 c = PortP->gs.xmit_cnt;
 124                 if (c > PKT_MAX_DATA_LEN)
 125                         c = PKT_MAX_DATA_LEN;
 126
 127                 /* Don't copy past the end of the source buffer */
 128                 if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail)
 129                         c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail;
 130
 131                 {
 132                         int t;
 133                         t = (c > 10) ? 10 : c;
 134
 135                         rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t));
 136                 }
 137                 /* If for one reason or another, we can't copy more data,
 138                    we're done! */
 139                 if (c == 0)
 140                         break;
 141
 142                 rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
 143                 /*    udelay (1); */
 144
 145                 writeb(c, &(PacketP->len));
 146                 if (!(PortP->State & RIO_DELETED)) {
 147                         add_transmit(PortP);
 148                         /*
 149                          ** Count chars tx'd for port statistics reporting
 150                          */
 151                         if (PortP->statsGather)
 152                                 PortP->txchars += c;
 153                 }
 154                 PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1);
 155                 PortP->gs.xmit_cnt -= c;
 156         }
 157
 158         rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 159
 160         if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN))
 161                 tty_wakeup(PortP->gs.port.tty);
 162
 163 }
 164
 165
 166 /*
 167 ** RIO Host Service routine. Does all the work traditionally associated with an
 168 ** interrupt.
 169 */
 170 static int RupIntr;
 171 static int RxIntr;
 172 static int TxIntr;
 173
 174 void RIOServiceHost(struct rio_info *p, struct Host *HostP)
 175 {
 176         rio_spin_lock(&HostP->HostLock);
 177         if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
 178                 static int t = 0;
 179                 rio_spin_unlock(&HostP->HostLock);
 180                 if ((t++ % 200) == 0)
 181                         rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags);
 182                 return;
 183         }
 184         rio_spin_unlock(&HostP->HostLock);
 185
 186         if (readw(&HostP->ParmMapP->rup_intr)) {
 187                 writew(0, &HostP->ParmMapP->rup_intr);
 188                 p->RIORupCount++;
 189                 RupIntr++;
 190                 rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %Zd\n", HostP - p->RIOHosts);
 191                 RIOPollHostCommands(p, HostP);
 192         }
 193
 194         if (readw(&HostP->ParmMapP->rx_intr)) {
 195                 int port;
 196
 197                 writew(0, &HostP->ParmMapP->rx_intr);
 198                 p->RIORxCount++;
 199                 RxIntr++;
 200
 201                 rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %Zd\n", HostP - p->RIOHosts);
 202                 /*
 203                  ** Loop through every port. If the port is mapped into
 204                  ** the system ( i.e. has /dev/ttyXXXX associated ) then it is
 205                  ** worth checking. If the port isn't open, grab any packets
 206                  ** hanging on its receive queue and stuff them on the free
 207                  ** list; check for commands on the way.
 208                  */
 209                 for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
 210                         struct Port *PortP = p->RIOPortp[port];
 211                         struct tty_struct *ttyP;
 212                         struct PKT __iomem *PacketP;
 213
 214                         /*
 215                          ** not mapped in - most of the RIOPortp[] information
 216                          ** has not been set up!
 217                          ** Optimise: ports come in bundles of eight.
 218                          */
 219                         if (!PortP->Mapped) {
 220                                 port += 7;
 221                                 continue;       /* with the next port */
 222                         }
 223
 224                         /*
 225                          ** If the host board isn't THIS host board, check the next one.
 226                          ** optimise: ports come in bundles of eight.
 227                          */
 228                         if (PortP->HostP != HostP) {
 229                                 port += 7;
 230                                 continue;
 231                         }
 232
 233                         /*
 234                          ** Let us see - is the port open? If not, then don't service it.
 235                          */
 236                         if (!(PortP->PortState & PORT_ISOPEN)) {
 237                                 continue;
 238                         }
 239
 240                         /*
 241                          ** find corresponding tty structure. The process of mapping
 242                          ** the ports puts these here.
 243                          */
 244                         ttyP = PortP->gs.port.tty;
 245
 246                         /*
 247                          ** Lock the port before we begin working on it.
 248                          */
 249                         rio_spin_lock(&PortP->portSem);
 250
 251                         /*
 252                          ** Process received data if there is any.
 253                          */
 254                         if (can_remove_receive(&PacketP, PortP))
 255                                 RIOReceive(p, PortP);
 256
 257                         /*
 258                          ** If there is no data left to be read from the port, and
 259                          ** it's handshake bit is set, then we must clear the handshake,
 260                          ** so that that downstream RTA is re-enabled.
 261                          */
 262                         if (!can_remove_receive(&PacketP, PortP) && (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) {
 263                                 /*
 264                                  ** MAGIC! ( Basically, handshake the RX buffer, so that
 265                                  ** the RTAs upstream can be re-enabled. )
 266                                  */
 267                                 rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n");
 268                                 writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake);
 269                         }
 270                         rio_spin_unlock(&PortP->portSem);
 271                 }
 272         }
 273
 274         if (readw(&HostP->ParmMapP->tx_intr)) {
 275                 int port;
 276
 277                 writew(0, &HostP->ParmMapP->tx_intr);
 278
 279                 p->RIOTxCount++;
 280                 TxIntr++;
 281                 rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %Zd\n", HostP - p->RIOHosts);
 282
 283                 /*
 284                  ** Loop through every port.
 285                  ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX
 286                  ** associated ) then it is worth checking.
 287                  */
 288                 for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
 289                         struct Port *PortP = p->RIOPortp[port];
 290                         struct tty_struct *ttyP;
 291                         struct PKT __iomem *PacketP;
 292
 293                         /*
 294                          ** not mapped in - most of the RIOPortp[] information
 295                          ** has not been set up!
 296                          */
 297                         if (!PortP->Mapped) {
 298                                 port += 7;
 299                                 continue;       /* with the next port */
 300                         }
 301
 302                         /*
 303                          ** If the host board isn't running, then its data structures
 304                          ** are no use to us - continue quietly.
 305                          */
 306                         if (PortP->HostP != HostP) {
 307                                 port += 7;
 308                                 continue;       /* with the next port */
 309                         }
 310
 311                         /*
 312                          ** Let us see - is the port open? If not, then don't service it.
 313                          */
 314                         if (!(PortP->PortState & PORT_ISOPEN)) {
 315                                 continue;
 316                         }
 317
 318                         rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port);
 319                         /*
 320                          ** Lock the port before we begin working on it.
 321                          */
 322                         rio_spin_lock(&PortP->portSem);
 323
 324                         /*
 325                          ** If we can't add anything to the transmit queue, then
 326                          ** we need do none of this processing.
 327                          */
 328                         if (!can_add_transmit(&PacketP, PortP)) {
 329                                 rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n");
 330                                 rio_spin_unlock(&PortP->portSem);
 331                                 continue;
 332                         }
 333
 334                         /*
 335                          ** find corresponding tty structure. The process of mapping
 336                          ** the ports puts these here.
 337                          */
 338                         ttyP = PortP->gs.port.tty;
 339                         /* If ttyP is NULL, the port is getting closed. Forget about it. */
 340                         if (!ttyP) {
 341                                 rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n");
 342                                 rio_spin_unlock(&PortP->portSem);
 343                                 continue;
 344                         }
 345                         /*
 346                          ** If there is more room available we start up the transmit
 347                          ** data process again. This can be direct I/O, if the cookmode
 348                          ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the
 349                          ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch
 350                          ** characters via the line discipline. We must always call
 351                          ** the line discipline,
 352                          ** so that user input characters can be echoed correctly.
 353                          **
 354                          ** ++++ Update +++++
 355                          ** With the advent of double buffering, we now see if
 356                          ** TxBufferOut-In is non-zero. If so, then we copy a packet
 357                          ** to the output place, and set it going. If this empties
 358                          ** the buffer, then we must issue a wakeup( ) on OUT.
 359                          ** If it frees space in the buffer then we must issue
 360                          ** a wakeup( ) on IN.
 361                          **
 362                          ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we
 363                          ** have to send a WFLUSH command down the PHB, to mark the
 364                          ** end point of a WFLUSH. We also need to clear out any
 365                          ** data from the double buffer! ( note that WflushFlag is a
 366                          ** *count* of the number of WFLUSH commands outstanding! )
 367                          **
 368                          ** ++++ And there's more!
 369                          ** If an RTA is powered off, then on again, and rebooted,
 370                          ** whilst it has ports open, then we need to re-open the ports.
 371                          ** ( reasonable enough ). We can't do this when we spot the
 372                          ** re-boot, in interrupt time, because the queue is probably
 373                          ** full. So, when we come in here, we need to test if any
 374                          ** ports are in this condition, and re-open the port before
 375                          ** we try to send any more data to it. Now, the re-booted
 376                          ** RTA will be discarding packets from the PHB until it
 377                          ** receives this open packet, but don't worry tooo much
 378                          ** about that. The one thing that is interesting is the
 379                          ** combination of this effect and the WFLUSH effect!
 380                          */
 381                         /* For now don't handle RTA reboots. -- REW.
 382                            Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
 383                         if (PortP->MagicFlags) {
 384                                 if (PortP->MagicFlags & MAGIC_REBOOT) {
 385                                         /*
 386                                          ** well, the RTA has been rebooted, and there is room
 387                                          ** on its queue to add the open packet that is required.
 388                                          **
 389                                          ** The messy part of this line is trying to decide if
 390                                          ** we need to call the Param function as a tty or as
 391                                          ** a modem.
 392                                          ** DONT USE CLOCAL AS A TEST FOR THIS!
 393                                          **
 394                                          ** If we can't param the port, then move on to the
 395                                          ** next port.
 396                                          */
 397                                         PortP->InUse = NOT_INUSE;
 398
 399                                         rio_spin_unlock(&PortP->portSem);
 400                                         if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL)
 401                                                 continue;       /* with next port */
 402                                         rio_spin_lock(&PortP->portSem);
 403                                         PortP->MagicFlags &= ~MAGIC_REBOOT;
 404                                 }
 405
 406                                 /*
 407                                  ** As mentioned above, this is a tacky hack to cope
 408                                  ** with WFLUSH
 409                                  */
 410                                 if (PortP->WflushFlag) {
 411                                         rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n");
 412
 413                                         if (PortP->InUse)
 414                                                 rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n");
 415                                 }
 416
 417                                 while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) {
 418                                         int p;
 419                                         struct PktCmd __iomem *PktCmdP;
 420
 421                                         rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
 422                                         /*
 423                                          ** make it look just like a WFLUSH command
 424                                          */
 425                                         PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0];
 426
 427                                         writeb(RIOC_WFLUSH, &PktCmdP->Command);
 428
 429                                         p = PortP->HostPort % (u16) PORTS_PER_RTA;
 430
 431                                         /*
 432                                          ** If second block of ports for 16 port RTA, add 8
 433                                          ** to index 8-15.
 434                                          */
 435                                         if (PortP->SecondBlock)
 436                                                 p += PORTS_PER_RTA;
 437
 438                                         writeb(p, &PktCmdP->PhbNum);
 439
 440                                         /*
 441                                          ** to make debuggery easier
 442                                          */
 443                                         writeb('W', &PacketP->data[2]);
 444                                         writeb('F', &PacketP->data[3]);
 445                                         writeb('L', &PacketP->data[4]);
 446                                         writeb('U', &PacketP->data[5]);
 447                                         writeb('S', &PacketP->data[6]);
 448                                         writeb('H', &PacketP->data[7]);
 449                                         writeb(' ', &PacketP->data[8]);
 450                                         writeb('0' + PortP->WflushFlag, &PacketP->data[9]);
 451                                         writeb(' ', &PacketP->data[10]);
 452                                         writeb(' ', &PacketP->data[11]);
 453                                         writeb('\0', &PacketP->data[12]);
 454
 455                                         /*
 456                                          ** its two bytes long!
 457                                          */
 458                                         writeb(PKT_CMD_BIT | 2, &PacketP->len);
 459
 460                                         /*
 461                                          ** queue it!
 462                                          */
 463                                         if (!(PortP->State & RIO_DELETED)) {
 464                                                 add_transmit(PortP);
 465                                                 /*
 466                                                  ** Count chars tx'd for port statistics reporting
 467                                                  */
 468                                                 if (PortP->statsGather)
 469                                                         PortP->txchars += 2;
 470                                         }
 471
 472                                         if (--(PortP->WflushFlag) == 0) {
 473                                                 PortP->MagicFlags &= ~MAGIC_FLUSH;
 474                                         }
 475
 476                                         rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag);
 477                                 }
 478                                 if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) {
 479                                         if (PortP->MagicFlags & MAGIC_FLUSH) {
 480                                                 PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
 481                                         } else {
 482                                                 if (!can_add_transmit(&PacketP, PortP)) {
 483                                                         rio_spin_unlock(&PortP->portSem);
 484                                                         continue;
 485                                                 }
 486                                                 rio_spin_unlock(&PortP->portSem);
 487                                                 RIOTxEnable((char *) PortP);
 488                                                 rio_spin_lock(&PortP->portSem);
 489                                                 PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
 490                                         }
 491                                 }
 492                         }
 493
 494
 495                         /*
 496                          ** If we can't add anything to the transmit queue, then
 497                          ** we need do none of the remaining processing.
 498                          */
 499                         if (!can_add_transmit(&PacketP, PortP)) {
 500                                 rio_spin_unlock(&PortP->portSem);
 501                                 continue;
 502                         }
 503
 504                         rio_spin_unlock(&PortP->portSem);
 505                         RIOTxEnable((char *) PortP);
 506                 }
 507         }
 508 }
 509
 510 /*
 511 ** Routine for handling received data for tty drivers
 512 */
 513 static void RIOReceive(struct rio_info *p, struct Port *PortP)
 514 {
 515         struct tty_struct *TtyP;
 516         unsigned short transCount;
 517         struct PKT __iomem *PacketP;
 518         register unsigned int DataCnt;
 519         unsigned char __iomem *ptr;
 520         unsigned char *buf;
 521         int copied = 0;
 522
 523         static int intCount, RxIntCnt;
 524
 525         /*
 526          ** The receive data process is to remove packets from the
 527          ** PHB until there aren't any more or the current cblock
 528          ** is full. When this occurs, there will be some left over
 529          ** data in the packet, that we must do something with.
 530          ** As we haven't unhooked the packet from the read list
 531          ** yet, we can just leave the packet there, having first
 532          ** made a note of how far we got. This means that we need
 533          ** a pointer per port saying where we start taking the
 534          ** data from - this will normally be zero, but when we
 535          ** run out of space it will be set to the offset of the
 536          ** next byte to copy from the packet data area. The packet
 537          ** length field is decremented by the number of bytes that
 538          ** we successfully removed from the packet. When this reaches
 539          ** zero, we reset the offset pointer to be zero, and free
 540          ** the packet from the front of the queue.
 541          */
 542
 543         intCount++;
 544
 545         TtyP = PortP->gs.port.tty;
 546         if (!TtyP) {
 547                 rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
 548                 return;
 549         }
 550
 551         if (PortP->State & RIO_THROTTLE_RX) {
 552                 rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n");
 553                 return;
 554         }
 555
 556         if (PortP->State & RIO_DELETED) {
 557                 while (can_remove_receive(&PacketP, PortP)) {
 558                         remove_receive(PortP);
 559                         put_free_end(PortP->HostP, PacketP);
 560                 }
 561         } else {
 562                 /*
 563                  ** loop, just so long as:
 564                  **   i ) there's some data ( i.e. can_remove_receive )
 565                  **  ii ) we haven't been blocked
 566                  ** iii ) there's somewhere to put the data
 567                  **  iv ) we haven't outstayed our welcome
 568                  */
 569                 transCount = 1;
 570                 while (can_remove_receive(&PacketP, PortP)
 571                        && transCount) {
 572                         RxIntCnt++;
 573
 574                         /*
 575                          ** check that it is not a command!
 576                          */
 577                         if (readb(&PacketP->len) & PKT_CMD_BIT) {
 578                                 rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
 579                                 /*      rio_dprint(RIO_DEBUG_INTR, (" sysport   = %d\n", p->RIOPortp->PortNum)); */
 580                                 rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit));
 581                                 rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port));
 582                                 rio_dprintk(RIO_DEBUG_INTR, " src_unit  = %d\n", readb(&PacketP->src_unit));
 583                                 rio_dprintk(RIO_DEBUG_INTR, " src_port  = %d\n", readb(&PacketP->src_port));
 584                                 rio_dprintk(RIO_DEBUG_INTR, " len          = %d\n", readb(&PacketP->len));
 585                                 rio_dprintk(RIO_DEBUG_INTR, " control   = %d\n", readb(&PacketP->control));
 586                                 rio_dprintk(RIO_DEBUG_INTR, " csum         = %d\n", readw(&PacketP->csum));
 587                                 rio_dprintk(RIO_DEBUG_INTR, "    data bytes: ");
 588                                 for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++)
 589                                         rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt]));
 590                                 remove_receive(PortP);
 591                                 put_free_end(PortP->HostP, PacketP);
 592                                 continue;       /* with next packet */
 593                         }
 594
 595                         /*
 596                          ** How many characters can we move 'upstream' ?
 597                          **
 598                          ** Determine the minimum of the amount of data
 599                          ** available and the amount of space in which to
 600                          ** put it.
 601                          **
 602                          ** 1.        Get the packet length by masking 'len'
 603                          **   for only the length bits.
 604                          ** 2.        Available space is [buffer size] - [space used]
 605                          **
 606                          ** Transfer count is the minimum of packet length
 607                          ** and available space.
 608                          */
 609
 610                         transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK);
 611                         rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount);
 612                         /*
 613                          ** To use the following 'kkprintfs' for debugging - change the '#undef'
 614                          ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
 615                          ** driver).
 616                          */
 617                         ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart;
 618
 619                         tty_prepare_flip_string(TtyP, &buf, transCount);
 620                         rio_memcpy_fromio(buf, ptr, transCount);
 621                         PortP->RxDataStart += transCount;
 622                         writeb(readb(&PacketP->len)-transCount, &PacketP->len);
 623                         copied += transCount;
 624
 625
 626
 627                         if (readb(&PacketP->len) == 0) {
 628                                 /*
 629                                  ** If we have emptied the packet, then we can
 630                                  ** free it, and reset the start pointer for
 631                                  ** the next packet.
 632                                  */
 633                                 remove_receive(PortP);
 634                                 put_free_end(PortP->HostP, PacketP);
 635                                 PortP->RxDataStart = 0;
 636                         }
 637                 }
 638         }
 639         if (copied) {
 640                 rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied);
 641                 tty_flip_buffer_push(TtyP);
 642         }
 643
 644         return;
 645 }
 646