git.oblomov.eu Git - linux-2.6/blob - arch/blackfin/mach-bf527/boards/ezbrd.c

   1 /*
   2  * File:         arch/blackfin/mach-bf527/boards/ezbrd.c
   3  * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2008 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/mtd/mtd.h>
  34 #include <linux/mtd/partitions.h>
  35 #include <linux/mtd/physmap.h>
  36 #include <linux/spi/spi.h>
  37 #include <linux/spi/flash.h>
  38
  39 #include <linux/i2c.h>
  40 #include <linux/irq.h>
  41 #include <linux/interrupt.h>
  42 #include <linux/usb/musb.h>
  43 #include <asm/dma.h>
  44 #include <asm/bfin5xx_spi.h>
  45 #include <asm/reboot.h>
  46 #include <asm/nand.h>
  47 #include <asm/portmux.h>
  48 #include <asm/dpmc.h>
  49 #include <linux/spi/ad7877.h>
  50
  51 /*
  52  * Name the Board for the /proc/cpuinfo
  53  */
  54 const char bfin_board_name[] = "BF526-EZBRD";
  55
  56 /*
  57  *  Driver needs to know address, irq and flag pin.
  58  */
  59
  60 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  61 static struct resource musb_resources[] = {
  62         [0] = {
  63                 .start  = 0xffc03800,
  64                 .end    = 0xffc03cff,
  65                 .flags  = IORESOURCE_MEM,
  66         },
  67         [1] = { /* general IRQ */
  68                 .start  = IRQ_USB_INT0,
  69                 .end    = IRQ_USB_INT0,
  70                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  71         },
  72         [2] = { /* DMA IRQ */
  73                 .start  = IRQ_USB_DMA,
  74                 .end    = IRQ_USB_DMA,
  75                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  76         },
  77 };
  78
  79 static struct musb_hdrc_config musb_config = {
  80         .multipoint     = 0,
  81         .dyn_fifo       = 0,
  82         .soft_con       = 1,
  83         .dma            = 1,
  84         .num_eps        = 7,
  85         .dma_channels   = 7,
  86         .gpio_vrsel     = GPIO_PG13,
  87 };
  88
  89 static struct musb_hdrc_platform_data musb_plat = {
  90 #if defined(CONFIG_USB_MUSB_OTG)
  91         .mode           = MUSB_OTG,
  92 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
  93         .mode           = MUSB_HOST,
  94 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
  95         .mode           = MUSB_PERIPHERAL,
  96 #endif
  97         .config         = &musb_config,
  98 };
  99
 100 static u64 musb_dmamask = ~(u32)0;
 101
 102 static struct platform_device musb_device = {
 103         .name           = "musb_hdrc",
 104         .id             = 0,
 105         .dev = {
 106                 .dma_mask               = &musb_dmamask,
 107                 .coherent_dma_mask      = 0xffffffff,
 108                 .platform_data          = &musb_plat,
 109         },
 110         .num_resources  = ARRAY_SIZE(musb_resources),
 111         .resource       = musb_resources,
 112 };
 113 #endif
 114
 115 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 116 static struct mtd_partition ezbrd_partitions[] = {
 117         {
 118                 .name       = "bootloader(nor)",
 119                 .size       = 0x40000,
 120                 .offset     = 0,
 121         }, {
 122                 .name       = "linux kernel(nor)",
 123                 .size       = 0x1C0000,
 124                 .offset     = MTDPART_OFS_APPEND,
 125         }, {
 126                 .name       = "file system(nor)",
 127                 .size       = MTDPART_SIZ_FULL,
 128                 .offset     = MTDPART_OFS_APPEND,
 129         }
 130 };
 131
 132 static struct physmap_flash_data ezbrd_flash_data = {
 133         .width      = 2,
 134         .parts      = ezbrd_partitions,
 135         .nr_parts   = ARRAY_SIZE(ezbrd_partitions),
 136 };
 137
 138 static struct resource ezbrd_flash_resource = {
 139         .start = 0x20000000,
 140         .end   = 0x203fffff,
 141         .flags = IORESOURCE_MEM,
 142 };
 143
 144 static struct platform_device ezbrd_flash_device = {
 145         .name          = "physmap-flash",
 146         .id            = 0,
 147         .dev = {
 148                 .platform_data = &ezbrd_flash_data,
 149         },
 150         .num_resources = 1,
 151         .resource      = &ezbrd_flash_resource,
 152 };
 153 #endif
 154
 155 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 156 static struct mtd_partition partition_info[] = {
 157         {
 158                 .name = "linux kernel(nand)",
 159                 .offset = 0,
 160                 .size = 4 * 1024 * 1024,
 161         },
 162         {
 163                 .name = "file system(nand)",
 164                 .offset = MTDPART_OFS_APPEND,
 165                 .size = MTDPART_SIZ_FULL,
 166         },
 167 };
 168
 169 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 170         .page_size = NFC_PG_SIZE_256,
 171         .data_width = NFC_NWIDTH_8,
 172         .partitions = partition_info,
 173         .nr_partitions = ARRAY_SIZE(partition_info),
 174         .rd_dly = 3,
 175         .wr_dly = 3,
 176 };
 177
 178 static struct resource bf5xx_nand_resources[] = {
 179         {
 180                 .start = NFC_CTL,
 181                 .end = NFC_DATA_RD + 2,
 182                 .flags = IORESOURCE_MEM,
 183         },
 184         {
 185                 .start = CH_NFC,
 186                 .end = CH_NFC,
 187                 .flags = IORESOURCE_IRQ,
 188         },
 189 };
 190
 191 static struct platform_device bf5xx_nand_device = {
 192         .name = "bf5xx-nand",
 193         .id = 0,
 194         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 195         .resource = bf5xx_nand_resources,
 196         .dev = {
 197                 .platform_data = &bf5xx_nand_platform,
 198         },
 199 };
 200 #endif
 201
 202 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 203 static struct platform_device rtc_device = {
 204         .name = "rtc-bfin",
 205         .id   = -1,
 206 };
 207 #endif
 208
 209
 210 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 211 static struct platform_device bfin_mac_device = {
 212         .name = "bfin_mac",
 213 };
 214 #endif
 215
 216 #if defined(CONFIG_MTD_M25P80) \
 217         || defined(CONFIG_MTD_M25P80_MODULE)
 218 static struct mtd_partition bfin_spi_flash_partitions[] = {
 219         {
 220                 .name = "bootloader(spi)",
 221                 .size = 0x00040000,
 222                 .offset = 0,
 223                 .mask_flags = MTD_CAP_ROM
 224         }, {
 225                 .name = "linux kernel(spi)",
 226                 .size = MTDPART_SIZ_FULL,
 227                 .offset = MTDPART_OFS_APPEND,
 228         }
 229 };
 230
 231 static struct flash_platform_data bfin_spi_flash_data = {
 232         .name = "m25p80",
 233         .parts = bfin_spi_flash_partitions,
 234         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 235         .type = "m25p16",
 236 };
 237
 238 /* SPI flash chip (m25p64) */
 239 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 240         .enable_dma = 0,         /* use dma transfer with this chip*/
 241         .bits_per_word = 8,
 242 };
 243 #endif
 244
 245 #if defined(CONFIG_SPI_ADC_BF533) \
 246         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 247 /* SPI ADC chip */
 248 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 249         .enable_dma = 1,         /* use dma transfer with this chip*/
 250         .bits_per_word = 16,
 251 };
 252 #endif
 253
 254 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 255 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 256         .enable_dma = 1,
 257         .bits_per_word = 8,
 258 };
 259 #endif
 260
 261 #if defined(CONFIG_PBX)
 262 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 263         .ctl_reg        = 0x4, /* send zero */
 264         .enable_dma     = 0,
 265         .bits_per_word  = 8,
 266         .cs_change_per_word = 1,
 267 };
 268 #endif
 269
 270 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 271 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 272         .enable_dma = 0,
 273         .bits_per_word = 16,
 274 };
 275
 276 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 277         .model                  = 7877,
 278         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 279         .x_plate_ohms           = 419,
 280         .y_plate_ohms           = 486,
 281         .pressure_max           = 1000,
 282         .pressure_min           = 0,
 283         .stopacq_polarity       = 1,
 284         .first_conversion_delay = 3,
 285         .acquisition_time       = 1,
 286         .averaging              = 1,
 287         .pen_down_acc_interval  = 1,
 288 };
 289 #endif
 290
 291 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 292          && defined(CONFIG_SND_SOC_WM8731_SPI)
 293 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
 294         .enable_dma = 0,
 295         .bits_per_word = 16,
 296 };
 297 #endif
 298
 299 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 300 static struct bfin5xx_spi_chip spidev_chip_info = {
 301         .enable_dma = 0,
 302         .bits_per_word = 8,
 303 };
 304 #endif
 305
 306 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 307 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 308         .enable_dma = 0,
 309         .bits_per_word = 8,
 310 };
 311 #endif
 312
 313 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 314 #if defined(CONFIG_MTD_M25P80) \
 315         || defined(CONFIG_MTD_M25P80_MODULE)
 316         {
 317                 /* the modalias must be the same as spi device driver name */
 318                 .modalias = "m25p80", /* Name of spi_driver for this device */
 319                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 320                 .bus_num = 0, /* Framework bus number */
 321                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 322                 .platform_data = &bfin_spi_flash_data,
 323                 .controller_data = &spi_flash_chip_info,
 324                 .mode = SPI_MODE_3,
 325         },
 326 #endif
 327
 328 #if defined(CONFIG_SPI_ADC_BF533) \
 329         || defined(CONFIG_SPI_ADC_BF533_MODULE)
 330         {
 331                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 332                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 333                 .bus_num = 0, /* Framework bus number */
 334                 .chip_select = 1, /* Framework chip select. */
 335                 .platform_data = NULL, /* No spi_driver specific config */
 336                 .controller_data = &spi_adc_chip_info,
 337         },
 338 #endif
 339
 340 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 341         {
 342                 .modalias = "spi_mmc_dummy",
 343                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 344                 .bus_num = 0,
 345                 .chip_select = 0,
 346                 .platform_data = NULL,
 347                 .controller_data = &spi_mmc_chip_info,
 348                 .mode = SPI_MODE_3,
 349         },
 350         {
 351                 .modalias = "spi_mmc",
 352                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 353                 .bus_num = 0,
 354                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
 355                 .platform_data = NULL,
 356                 .controller_data = &spi_mmc_chip_info,
 357                 .mode = SPI_MODE_3,
 358         },
 359 #endif
 360 #if defined(CONFIG_PBX)
 361         {
 362                 .modalias = "fxs-spi",
 363                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 364                 .bus_num = 0,
 365                 .chip_select = 8 - CONFIG_J11_JUMPER,
 366                 .controller_data = &spi_si3xxx_chip_info,
 367                 .mode = SPI_MODE_3,
 368         },
 369         {
 370                 .modalias = "fxo-spi",
 371                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 372                 .bus_num = 0,
 373                 .chip_select = 8 - CONFIG_J19_JUMPER,
 374                 .controller_data = &spi_si3xxx_chip_info,
 375                 .mode = SPI_MODE_3,
 376         },
 377 #endif
 378 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 379         {
 380                 .modalias               = "ad7877",
 381                 .platform_data          = &bfin_ad7877_ts_info,
 382                 .irq                    = IRQ_PF8,
 383                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 384                 .bus_num        = 0,
 385                 .chip_select  = 2,
 386                 .controller_data = &spi_ad7877_chip_info,
 387         },
 388 #endif
 389 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 390          && defined(CONFIG_SND_SOC_WM8731_SPI)
 391         {
 392                 .modalias       = "wm8731",
 393                 .max_speed_hz   = 3125000,     /* max spi clock (SCK) speed in HZ */
 394                 .bus_num        = 0,
 395                 .chip_select    = 5,
 396                 .controller_data = &spi_wm8731_chip_info,
 397                 .mode = SPI_MODE_0,
 398         },
 399 #endif
 400 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 401         {
 402                 .modalias = "spidev",
 403                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 404                 .bus_num = 0,
 405                 .chip_select = 1,
 406                 .controller_data = &spidev_chip_info,
 407         },
 408 #endif
 409 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 410         {
 411                 .modalias = "bfin-lq035q1-spi",
 412                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 413                 .bus_num = 0,
 414                 .chip_select = 1,
 415                 .controller_data = &lq035q1_spi_chip_info,
 416                 .mode = SPI_CPHA | SPI_CPOL,
 417         },
 418 #endif
 419 };
 420
 421 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 422 /* SPI controller data */
 423 static struct bfin5xx_spi_master bfin_spi0_info = {
 424         .num_chipselect = 8,
 425         .enable_dma = 1,  /* master has the ability to do dma transfer */
 426         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 427 };
 428
 429 /* SPI (0) */
 430 static struct resource bfin_spi0_resource[] = {
 431         [0] = {
 432                 .start = SPI0_REGBASE,
 433                 .end   = SPI0_REGBASE + 0xFF,
 434                 .flags = IORESOURCE_MEM,
 435                 },
 436         [1] = {
 437                 .start = CH_SPI,
 438                 .end   = CH_SPI,
 439                 .flags = IORESOURCE_IRQ,
 440         },
 441 };
 442
 443 static struct platform_device bfin_spi0_device = {
 444         .name = "bfin-spi",
 445         .id = 0, /* Bus number */
 446         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 447         .resource = bfin_spi0_resource,
 448         .dev = {
 449                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 450         },
 451 };
 452 #endif  /* spi master and devices */
 453
 454 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 455 static struct resource bfin_uart_resources[] = {
 456 #ifdef CONFIG_SERIAL_BFIN_UART0
 457         {
 458                 .start = 0xFFC00400,
 459                 .end = 0xFFC004FF,
 460                 .flags = IORESOURCE_MEM,
 461         },
 462 #endif
 463 #ifdef CONFIG_SERIAL_BFIN_UART1
 464         {
 465                 .start = 0xFFC02000,
 466                 .end = 0xFFC020FF,
 467                 .flags = IORESOURCE_MEM,
 468         },
 469 #endif
 470 };
 471
 472 static struct platform_device bfin_uart_device = {
 473         .name = "bfin-uart",
 474         .id = 1,
 475         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 476         .resource = bfin_uart_resources,
 477 };
 478 #endif
 479
 480 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 481 static struct resource bfin_sir_resources[] = {
 482 #ifdef CONFIG_BFIN_SIR0
 483         {
 484                 .start = 0xFFC00400,
 485                 .end = 0xFFC004FF,
 486                 .flags = IORESOURCE_MEM,
 487         },
 488 #endif
 489 #ifdef CONFIG_BFIN_SIR1
 490         {
 491                 .start = 0xFFC02000,
 492                 .end = 0xFFC020FF,
 493                 .flags = IORESOURCE_MEM,
 494         },
 495 #endif
 496 };
 497
 498 static struct platform_device bfin_sir_device = {
 499         .name = "bfin_sir",
 500         .id = 0,
 501         .num_resources = ARRAY_SIZE(bfin_sir_resources),
 502         .resource = bfin_sir_resources,
 503 };
 504 #endif
 505
 506 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 507 static struct resource bfin_twi0_resource[] = {
 508         [0] = {
 509                 .start = TWI0_REGBASE,
 510                 .end   = TWI0_REGBASE,
 511                 .flags = IORESOURCE_MEM,
 512         },
 513         [1] = {
 514                 .start = IRQ_TWI,
 515                 .end   = IRQ_TWI,
 516                 .flags = IORESOURCE_IRQ,
 517         },
 518 };
 519
 520 static struct platform_device i2c_bfin_twi_device = {
 521         .name = "i2c-bfin-twi",
 522         .id = 0,
 523         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 524         .resource = bfin_twi0_resource,
 525 };
 526 #endif
 527
 528 #ifdef CONFIG_I2C_BOARDINFO
 529 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 530 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 531         {
 532                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 533         },
 534 #endif
 535 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
 536         {
 537                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 538                 .irq = IRQ_PF8,
 539         },
 540 #endif
 541 };
 542 #endif
 543
 544 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 545 static struct platform_device bfin_sport0_uart_device = {
 546         .name = "bfin-sport-uart",
 547         .id = 0,
 548 };
 549
 550 static struct platform_device bfin_sport1_uart_device = {
 551         .name = "bfin-sport-uart",
 552         .id = 1,
 553 };
 554 #endif
 555
 556 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 557 #include <linux/input.h>
 558 #include <linux/gpio_keys.h>
 559
 560 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 561         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
 562         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
 563 };
 564
 565 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 566         .buttons        = bfin_gpio_keys_table,
 567         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 568 };
 569
 570 static struct platform_device bfin_device_gpiokeys = {
 571         .name      = "gpio-keys",
 572         .dev = {
 573                 .platform_data = &bfin_gpio_keys_data,
 574         },
 575 };
 576 #endif
 577
 578 static struct resource bfin_gpios_resources = {
 579         .start = 0,
 580         .end   = MAX_BLACKFIN_GPIOS - 1,
 581         .flags = IORESOURCE_IRQ,
 582 };
 583
 584 static struct platform_device bfin_gpios_device = {
 585         .name = "simple-gpio",
 586         .id = -1,
 587         .num_resources = 1,
 588         .resource = &bfin_gpios_resources,
 589 };
 590
 591 static const unsigned int cclk_vlev_datasheet[] =
 592 {
 593         VRPAIR(VLEV_100, 400000000),
 594         VRPAIR(VLEV_105, 426000000),
 595         VRPAIR(VLEV_110, 500000000),
 596         VRPAIR(VLEV_115, 533000000),
 597         VRPAIR(VLEV_120, 600000000),
 598 };
 599
 600 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 601         .tuple_tab = cclk_vlev_datasheet,
 602         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 603         .vr_settling_time = 25 /* us */,
 604 };
 605
 606 static struct platform_device bfin_dpmc = {
 607         .name = "bfin dpmc",
 608         .dev = {
 609                 .platform_data = &bfin_dmpc_vreg_data,
 610         },
 611 };
 612
 613 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 614 #include <asm/bfin-lq035q1.h>
 615
 616 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 617         .mode =         LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 618         .use_bl =       1,
 619         .gpio_bl =      GPIO_PG12,
 620 };
 621
 622 static struct resource bfin_lq035q1_resources[] = {
 623         {
 624                 .start = IRQ_PPI_ERROR,
 625                 .end = IRQ_PPI_ERROR,
 626                 .flags = IORESOURCE_IRQ,
 627         },
 628 };
 629
 630 static struct platform_device bfin_lq035q1_device = {
 631         .name           = "bfin-lq035q1",
 632         .id             = -1,
 633         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 634         .resource       = bfin_lq035q1_resources,
 635         .dev            = {
 636                 .platform_data = &bfin_lq035q1_data,
 637         },
 638 };
 639 #endif
 640
 641 static struct platform_device *stamp_devices[] __initdata = {
 642
 643         &bfin_dpmc,
 644
 645 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 646         &bf5xx_nand_device,
 647 #endif
 648
 649 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 650         &rtc_device,
 651 #endif
 652
 653 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 654         &musb_device,
 655 #endif
 656
 657 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 658         &bfin_mac_device,
 659 #endif
 660
 661 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 662         &bfin_spi0_device,
 663 #endif
 664
 665 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 666         &bfin_uart_device,
 667 #endif
 668
 669 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 670         &bfin_lq035q1_device,
 671 #endif
 672
 673 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 674         &bfin_sir_device,
 675 #endif
 676
 677 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 678         &i2c_bfin_twi_device,
 679 #endif
 680
 681 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 682         &bfin_sport0_uart_device,
 683         &bfin_sport1_uart_device,
 684 #endif
 685
 686 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 687         &bfin_device_gpiokeys,
 688 #endif
 689
 690 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 691         &ezbrd_flash_device,
 692 #endif
 693
 694         &bfin_gpios_device,
 695 };
 696
 697 static int __init stamp_init(void)
 698 {
 699         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 700
 701 #ifdef CONFIG_I2C_BOARDINFO
 702         i2c_register_board_info(0, bfin_i2c_board_info,
 703                                 ARRAY_SIZE(bfin_i2c_board_info));
 704 #endif
 705
 706         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 707         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 708         return 0;
 709 }
 710
 711 arch_initcall(stamp_init);
 712
 713 void native_machine_restart(char *cmd)
 714 {
 715         /* workaround reboot hang when booting from SPI */
 716         if ((bfin_read_SYSCR() & 0x7) == 0x3)
 717                 bfin_gpio_reset_spi0_ssel1();
 718 }
 719
 720 void bfin_get_ether_addr(char *addr)
 721 {
 722         /* the MAC is stored in OTP memory page 0xDF */
 723         u32 ret;
 724         u64 otp_mac;
 725         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
 726
 727         ret = otp_read(0xDF, 0x00, &otp_mac);
 728         if (!(ret & 0x1)) {
 729                 char *otp_mac_p = (char *)&otp_mac;
 730                 for (ret = 0; ret < 6; ++ret)
 731                         addr[ret] = otp_mac_p[5 - ret];
 732         }
 733 }
 734 EXPORT_SYMBOL(bfin_get_ether_addr);