Merge branch 'fixes' into for-linus
[linux-2.6] / drivers / net / myri10ge / myri10ge.c
1 /*************************************************************************
2  * myri10ge.c: Myricom Myri-10G Ethernet driver.
3  *
4  * Copyright (C) 2005 - 2007 Myricom, Inc.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. Neither the name of Myricom, Inc. nor the names of its contributors
16  *    may be used to endorse or promote products derived from this software
17  *    without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
23  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  *
31  *
32  * If the eeprom on your board is not recent enough, you will need to get a
33  * newer firmware image at:
34  *   http://www.myri.com/scs/download-Myri10GE.html
35  *
36  * Contact Information:
37  *   <help@myri.com>
38  *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
39  *************************************************************************/
40
41 #include <linux/tcp.h>
42 #include <linux/netdevice.h>
43 #include <linux/skbuff.h>
44 #include <linux/string.h>
45 #include <linux/module.h>
46 #include <linux/pci.h>
47 #include <linux/dma-mapping.h>
48 #include <linux/etherdevice.h>
49 #include <linux/if_ether.h>
50 #include <linux/if_vlan.h>
51 #include <linux/inet_lro.h>
52 #include <linux/dca.h>
53 #include <linux/ip.h>
54 #include <linux/inet.h>
55 #include <linux/in.h>
56 #include <linux/ethtool.h>
57 #include <linux/firmware.h>
58 #include <linux/delay.h>
59 #include <linux/timer.h>
60 #include <linux/vmalloc.h>
61 #include <linux/crc32.h>
62 #include <linux/moduleparam.h>
63 #include <linux/io.h>
64 #include <linux/log2.h>
65 #include <net/checksum.h>
66 #include <net/ip.h>
67 #include <net/tcp.h>
68 #include <asm/byteorder.h>
69 #include <asm/io.h>
70 #include <asm/processor.h>
71 #ifdef CONFIG_MTRR
72 #include <asm/mtrr.h>
73 #endif
74
75 #include "myri10ge_mcp.h"
76 #include "myri10ge_mcp_gen_header.h"
77
78 #define MYRI10GE_VERSION_STR "1.4.3-1.369"
79
80 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
81 MODULE_AUTHOR("Maintainer: help@myri.com");
82 MODULE_VERSION(MYRI10GE_VERSION_STR);
83 MODULE_LICENSE("Dual BSD/GPL");
84
85 #define MYRI10GE_MAX_ETHER_MTU 9014
86
87 #define MYRI10GE_ETH_STOPPED 0
88 #define MYRI10GE_ETH_STOPPING 1
89 #define MYRI10GE_ETH_STARTING 2
90 #define MYRI10GE_ETH_RUNNING 3
91 #define MYRI10GE_ETH_OPEN_FAILED 4
92
93 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
94 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
95 #define MYRI10GE_MAX_LRO_DESCRIPTORS 8
96 #define MYRI10GE_LRO_MAX_PKTS 64
97
98 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
99 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
100
101 #define MYRI10GE_ALLOC_ORDER 0
102 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
103 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
104
105 #define MYRI10GE_MAX_SLICES 32
106
107 struct myri10ge_rx_buffer_state {
108         struct page *page;
109         int page_offset;
110          DECLARE_PCI_UNMAP_ADDR(bus)
111          DECLARE_PCI_UNMAP_LEN(len)
112 };
113
114 struct myri10ge_tx_buffer_state {
115         struct sk_buff *skb;
116         int last;
117          DECLARE_PCI_UNMAP_ADDR(bus)
118          DECLARE_PCI_UNMAP_LEN(len)
119 };
120
121 struct myri10ge_cmd {
122         u32 data0;
123         u32 data1;
124         u32 data2;
125 };
126
127 struct myri10ge_rx_buf {
128         struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
129         struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
130         struct myri10ge_rx_buffer_state *info;
131         struct page *page;
132         dma_addr_t bus;
133         int page_offset;
134         int cnt;
135         int fill_cnt;
136         int alloc_fail;
137         int mask;               /* number of rx slots -1 */
138         int watchdog_needed;
139 };
140
141 struct myri10ge_tx_buf {
142         struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
143         __be32 __iomem *send_go;        /* "go" doorbell ptr */
144         __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
145         struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
146         char *req_bytes;
147         struct myri10ge_tx_buffer_state *info;
148         int mask;               /* number of transmit slots -1  */
149         int req ____cacheline_aligned;  /* transmit slots submitted     */
150         int pkt_start;          /* packets started */
151         int stop_queue;
152         int linearized;
153         int done ____cacheline_aligned; /* transmit slots completed     */
154         int pkt_done;           /* packets completed */
155         int wake_queue;
156         int queue_active;
157 };
158
159 struct myri10ge_rx_done {
160         struct mcp_slot *entry;
161         dma_addr_t bus;
162         int cnt;
163         int idx;
164         struct net_lro_mgr lro_mgr;
165         struct net_lro_desc lro_desc[MYRI10GE_MAX_LRO_DESCRIPTORS];
166 };
167
168 struct myri10ge_slice_netstats {
169         unsigned long rx_packets;
170         unsigned long tx_packets;
171         unsigned long rx_bytes;
172         unsigned long tx_bytes;
173         unsigned long rx_dropped;
174         unsigned long tx_dropped;
175 };
176
177 struct myri10ge_slice_state {
178         struct myri10ge_tx_buf tx;      /* transmit ring        */
179         struct myri10ge_rx_buf rx_small;
180         struct myri10ge_rx_buf rx_big;
181         struct myri10ge_rx_done rx_done;
182         struct net_device *dev;
183         struct napi_struct napi;
184         struct myri10ge_priv *mgp;
185         struct myri10ge_slice_netstats stats;
186         __be32 __iomem *irq_claim;
187         struct mcp_irq_data *fw_stats;
188         dma_addr_t fw_stats_bus;
189         int watchdog_tx_done;
190         int watchdog_tx_req;
191 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
192         int cached_dca_tag;
193         int cpu;
194         __be32 __iomem *dca_tag;
195 #endif
196         char irq_desc[32];
197 };
198
199 struct myri10ge_priv {
200         struct myri10ge_slice_state *ss;
201         int tx_boundary;        /* boundary transmits cannot cross */
202         int num_slices;
203         int running;            /* running?             */
204         int csum_flag;          /* rx_csums?            */
205         int small_bytes;
206         int big_bytes;
207         int max_intr_slots;
208         struct net_device *dev;
209         struct net_device_stats stats;
210         spinlock_t stats_lock;
211         u8 __iomem *sram;
212         int sram_size;
213         unsigned long board_span;
214         unsigned long iomem_base;
215         __be32 __iomem *irq_deassert;
216         char *mac_addr_string;
217         struct mcp_cmd_response *cmd;
218         dma_addr_t cmd_bus;
219         struct pci_dev *pdev;
220         int msi_enabled;
221         int msix_enabled;
222         struct msix_entry *msix_vectors;
223 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
224         int dca_enabled;
225 #endif
226         u32 link_state;
227         unsigned int rdma_tags_available;
228         int intr_coal_delay;
229         __be32 __iomem *intr_coal_delay_ptr;
230         int mtrr;
231         int wc_enabled;
232         int down_cnt;
233         wait_queue_head_t down_wq;
234         struct work_struct watchdog_work;
235         struct timer_list watchdog_timer;
236         int watchdog_resets;
237         int watchdog_pause;
238         int pause;
239         char *fw_name;
240         char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
241         char *product_code_string;
242         char fw_version[128];
243         int fw_ver_major;
244         int fw_ver_minor;
245         int fw_ver_tiny;
246         int adopted_rx_filter_bug;
247         u8 mac_addr[6];         /* eeprom mac address */
248         unsigned long serial_number;
249         int vendor_specific_offset;
250         int fw_multicast_support;
251         unsigned long features;
252         u32 max_tso6;
253         u32 read_dma;
254         u32 write_dma;
255         u32 read_write_dma;
256         u32 link_changes;
257         u32 msg_enable;
258 };
259
260 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
261 static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
262 static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
263 static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
264
265 static char *myri10ge_fw_name = NULL;
266 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
267 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
268
269 static int myri10ge_ecrc_enable = 1;
270 module_param(myri10ge_ecrc_enable, int, S_IRUGO);
271 MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
272
273 static int myri10ge_small_bytes = -1;   /* -1 == auto */
274 module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
275 MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
276
277 static int myri10ge_msi = 1;    /* enable msi by default */
278 module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
279 MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
280
281 static int myri10ge_intr_coal_delay = 75;
282 module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
283 MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
284
285 static int myri10ge_flow_control = 1;
286 module_param(myri10ge_flow_control, int, S_IRUGO);
287 MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
288
289 static int myri10ge_deassert_wait = 1;
290 module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
291 MODULE_PARM_DESC(myri10ge_deassert_wait,
292                  "Wait when deasserting legacy interrupts");
293
294 static int myri10ge_force_firmware = 0;
295 module_param(myri10ge_force_firmware, int, S_IRUGO);
296 MODULE_PARM_DESC(myri10ge_force_firmware,
297                  "Force firmware to assume aligned completions");
298
299 static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
300 module_param(myri10ge_initial_mtu, int, S_IRUGO);
301 MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
302
303 static int myri10ge_napi_weight = 64;
304 module_param(myri10ge_napi_weight, int, S_IRUGO);
305 MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
306
307 static int myri10ge_watchdog_timeout = 1;
308 module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
309 MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
310
311 static int myri10ge_max_irq_loops = 1048576;
312 module_param(myri10ge_max_irq_loops, int, S_IRUGO);
313 MODULE_PARM_DESC(myri10ge_max_irq_loops,
314                  "Set stuck legacy IRQ detection threshold");
315
316 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
317
318 static int myri10ge_debug = -1; /* defaults above */
319 module_param(myri10ge_debug, int, 0);
320 MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
321
322 static int myri10ge_lro = 1;
323 module_param(myri10ge_lro, int, S_IRUGO);
324 MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload");
325
326 static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
327 module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
328 MODULE_PARM_DESC(myri10ge_lro_max_pkts,
329                  "Number of LRO packets to be aggregated");
330
331 static int myri10ge_fill_thresh = 256;
332 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
333 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
334
335 static int myri10ge_reset_recover = 1;
336
337 static int myri10ge_max_slices = 1;
338 module_param(myri10ge_max_slices, int, S_IRUGO);
339 MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
340
341 static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
342 module_param(myri10ge_rss_hash, int, S_IRUGO);
343 MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
344
345 static int myri10ge_dca = 1;
346 module_param(myri10ge_dca, int, S_IRUGO);
347 MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
348
349 #define MYRI10GE_FW_OFFSET 1024*1024
350 #define MYRI10GE_HIGHPART_TO_U32(X) \
351 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
352 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
353
354 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
355
356 static void myri10ge_set_multicast_list(struct net_device *dev);
357 static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev);
358
359 static inline void put_be32(__be32 val, __be32 __iomem * p)
360 {
361         __raw_writel((__force __u32) val, (__force void __iomem *)p);
362 }
363
364 static int
365 myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
366                   struct myri10ge_cmd *data, int atomic)
367 {
368         struct mcp_cmd *buf;
369         char buf_bytes[sizeof(*buf) + 8];
370         struct mcp_cmd_response *response = mgp->cmd;
371         char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
372         u32 dma_low, dma_high, result, value;
373         int sleep_total = 0;
374
375         /* ensure buf is aligned to 8 bytes */
376         buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
377
378         buf->data0 = htonl(data->data0);
379         buf->data1 = htonl(data->data1);
380         buf->data2 = htonl(data->data2);
381         buf->cmd = htonl(cmd);
382         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
383         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
384
385         buf->response_addr.low = htonl(dma_low);
386         buf->response_addr.high = htonl(dma_high);
387         response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
388         mb();
389         myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
390
391         /* wait up to 15ms. Longest command is the DMA benchmark,
392          * which is capped at 5ms, but runs from a timeout handler
393          * that runs every 7.8ms. So a 15ms timeout leaves us with
394          * a 2.2ms margin
395          */
396         if (atomic) {
397                 /* if atomic is set, do not sleep,
398                  * and try to get the completion quickly
399                  * (1ms will be enough for those commands) */
400                 for (sleep_total = 0;
401                      sleep_total < 1000
402                      && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
403                      sleep_total += 10) {
404                         udelay(10);
405                         mb();
406                 }
407         } else {
408                 /* use msleep for most command */
409                 for (sleep_total = 0;
410                      sleep_total < 15
411                      && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
412                      sleep_total++)
413                         msleep(1);
414         }
415
416         result = ntohl(response->result);
417         value = ntohl(response->data);
418         if (result != MYRI10GE_NO_RESPONSE_RESULT) {
419                 if (result == 0) {
420                         data->data0 = value;
421                         return 0;
422                 } else if (result == MXGEFW_CMD_UNKNOWN) {
423                         return -ENOSYS;
424                 } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
425                         return -E2BIG;
426                 } else if (result == MXGEFW_CMD_ERROR_RANGE &&
427                            cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
428                            (data->
429                             data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
430                            0) {
431                         return -ERANGE;
432                 } else {
433                         dev_err(&mgp->pdev->dev,
434                                 "command %d failed, result = %d\n",
435                                 cmd, result);
436                         return -ENXIO;
437                 }
438         }
439
440         dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
441                 cmd, result);
442         return -EAGAIN;
443 }
444
445 /*
446  * The eeprom strings on the lanaiX have the format
447  * SN=x\0
448  * MAC=x:x:x:x:x:x\0
449  * PT:ddd mmm xx xx:xx:xx xx\0
450  * PV:ddd mmm xx xx:xx:xx xx\0
451  */
452 static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
453 {
454         char *ptr, *limit;
455         int i;
456
457         ptr = mgp->eeprom_strings;
458         limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
459
460         while (*ptr != '\0' && ptr < limit) {
461                 if (memcmp(ptr, "MAC=", 4) == 0) {
462                         ptr += 4;
463                         mgp->mac_addr_string = ptr;
464                         for (i = 0; i < 6; i++) {
465                                 if ((ptr + 2) > limit)
466                                         goto abort;
467                                 mgp->mac_addr[i] =
468                                     simple_strtoul(ptr, &ptr, 16);
469                                 ptr += 1;
470                         }
471                 }
472                 if (memcmp(ptr, "PC=", 3) == 0) {
473                         ptr += 3;
474                         mgp->product_code_string = ptr;
475                 }
476                 if (memcmp((const void *)ptr, "SN=", 3) == 0) {
477                         ptr += 3;
478                         mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
479                 }
480                 while (ptr < limit && *ptr++) ;
481         }
482
483         return 0;
484
485 abort:
486         dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
487         return -ENXIO;
488 }
489
490 /*
491  * Enable or disable periodic RDMAs from the host to make certain
492  * chipsets resend dropped PCIe messages
493  */
494
495 static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
496 {
497         char __iomem *submit;
498         __be32 buf[16] __attribute__ ((__aligned__(8)));
499         u32 dma_low, dma_high;
500         int i;
501
502         /* clear confirmation addr */
503         mgp->cmd->data = 0;
504         mb();
505
506         /* send a rdma command to the PCIe engine, and wait for the
507          * response in the confirmation address.  The firmware should
508          * write a -1 there to indicate it is alive and well
509          */
510         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
511         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
512
513         buf[0] = htonl(dma_high);       /* confirm addr MSW */
514         buf[1] = htonl(dma_low);        /* confirm addr LSW */
515         buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
516         buf[3] = htonl(dma_high);       /* dummy addr MSW */
517         buf[4] = htonl(dma_low);        /* dummy addr LSW */
518         buf[5] = htonl(enable); /* enable? */
519
520         submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
521
522         myri10ge_pio_copy(submit, &buf, sizeof(buf));
523         for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
524                 msleep(1);
525         if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
526                 dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
527                         (enable ? "enable" : "disable"));
528 }
529
530 static int
531 myri10ge_validate_firmware(struct myri10ge_priv *mgp,
532                            struct mcp_gen_header *hdr)
533 {
534         struct device *dev = &mgp->pdev->dev;
535
536         /* check firmware type */
537         if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
538                 dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
539                 return -EINVAL;
540         }
541
542         /* save firmware version for ethtool */
543         strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
544
545         sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
546                &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
547
548         if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR
549               && mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
550                 dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
551                 dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
552                         MXGEFW_VERSION_MINOR);
553                 return -EINVAL;
554         }
555         return 0;
556 }
557
558 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
559 {
560         unsigned crc, reread_crc;
561         const struct firmware *fw;
562         struct device *dev = &mgp->pdev->dev;
563         unsigned char *fw_readback;
564         struct mcp_gen_header *hdr;
565         size_t hdr_offset;
566         int status;
567         unsigned i;
568
569         if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
570                 dev_err(dev, "Unable to load %s firmware image via hotplug\n",
571                         mgp->fw_name);
572                 status = -EINVAL;
573                 goto abort_with_nothing;
574         }
575
576         /* check size */
577
578         if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
579             fw->size < MCP_HEADER_PTR_OFFSET + 4) {
580                 dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
581                 status = -EINVAL;
582                 goto abort_with_fw;
583         }
584
585         /* check id */
586         hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
587         if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
588                 dev_err(dev, "Bad firmware file\n");
589                 status = -EINVAL;
590                 goto abort_with_fw;
591         }
592         hdr = (void *)(fw->data + hdr_offset);
593
594         status = myri10ge_validate_firmware(mgp, hdr);
595         if (status != 0)
596                 goto abort_with_fw;
597
598         crc = crc32(~0, fw->data, fw->size);
599         for (i = 0; i < fw->size; i += 256) {
600                 myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
601                                   fw->data + i,
602                                   min(256U, (unsigned)(fw->size - i)));
603                 mb();
604                 readb(mgp->sram);
605         }
606         fw_readback = vmalloc(fw->size);
607         if (!fw_readback) {
608                 status = -ENOMEM;
609                 goto abort_with_fw;
610         }
611         /* corruption checking is good for parity recovery and buggy chipset */
612         memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
613         reread_crc = crc32(~0, fw_readback, fw->size);
614         vfree(fw_readback);
615         if (crc != reread_crc) {
616                 dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
617                         (unsigned)fw->size, reread_crc, crc);
618                 status = -EIO;
619                 goto abort_with_fw;
620         }
621         *size = (u32) fw->size;
622
623 abort_with_fw:
624         release_firmware(fw);
625
626 abort_with_nothing:
627         return status;
628 }
629
630 static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
631 {
632         struct mcp_gen_header *hdr;
633         struct device *dev = &mgp->pdev->dev;
634         const size_t bytes = sizeof(struct mcp_gen_header);
635         size_t hdr_offset;
636         int status;
637
638         /* find running firmware header */
639         hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
640
641         if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
642                 dev_err(dev, "Running firmware has bad header offset (%d)\n",
643                         (int)hdr_offset);
644                 return -EIO;
645         }
646
647         /* copy header of running firmware from SRAM to host memory to
648          * validate firmware */
649         hdr = kmalloc(bytes, GFP_KERNEL);
650         if (hdr == NULL) {
651                 dev_err(dev, "could not malloc firmware hdr\n");
652                 return -ENOMEM;
653         }
654         memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
655         status = myri10ge_validate_firmware(mgp, hdr);
656         kfree(hdr);
657
658         /* check to see if adopted firmware has bug where adopting
659          * it will cause broadcasts to be filtered unless the NIC
660          * is kept in ALLMULTI mode */
661         if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
662             mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
663                 mgp->adopted_rx_filter_bug = 1;
664                 dev_warn(dev, "Adopting fw %d.%d.%d: "
665                          "working around rx filter bug\n",
666                          mgp->fw_ver_major, mgp->fw_ver_minor,
667                          mgp->fw_ver_tiny);
668         }
669         return status;
670 }
671
672 static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
673 {
674         struct myri10ge_cmd cmd;
675         int status;
676
677         /* probe for IPv6 TSO support */
678         mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
679         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
680                                    &cmd, 0);
681         if (status == 0) {
682                 mgp->max_tso6 = cmd.data0;
683                 mgp->features |= NETIF_F_TSO6;
684         }
685
686         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
687         if (status != 0) {
688                 dev_err(&mgp->pdev->dev,
689                         "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
690                 return -ENXIO;
691         }
692
693         mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
694
695         return 0;
696 }
697
698 static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
699 {
700         char __iomem *submit;
701         __be32 buf[16] __attribute__ ((__aligned__(8)));
702         u32 dma_low, dma_high, size;
703         int status, i;
704
705         size = 0;
706         status = myri10ge_load_hotplug_firmware(mgp, &size);
707         if (status) {
708                 if (!adopt)
709                         return status;
710                 dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
711
712                 /* Do not attempt to adopt firmware if there
713                  * was a bad crc */
714                 if (status == -EIO)
715                         return status;
716
717                 status = myri10ge_adopt_running_firmware(mgp);
718                 if (status != 0) {
719                         dev_err(&mgp->pdev->dev,
720                                 "failed to adopt running firmware\n");
721                         return status;
722                 }
723                 dev_info(&mgp->pdev->dev,
724                          "Successfully adopted running firmware\n");
725                 if (mgp->tx_boundary == 4096) {
726                         dev_warn(&mgp->pdev->dev,
727                                  "Using firmware currently running on NIC"
728                                  ".  For optimal\n");
729                         dev_warn(&mgp->pdev->dev,
730                                  "performance consider loading optimized "
731                                  "firmware\n");
732                         dev_warn(&mgp->pdev->dev, "via hotplug\n");
733                 }
734
735                 mgp->fw_name = "adopted";
736                 mgp->tx_boundary = 2048;
737                 myri10ge_dummy_rdma(mgp, 1);
738                 status = myri10ge_get_firmware_capabilities(mgp);
739                 return status;
740         }
741
742         /* clear confirmation addr */
743         mgp->cmd->data = 0;
744         mb();
745
746         /* send a reload command to the bootstrap MCP, and wait for the
747          *  response in the confirmation address.  The firmware should
748          * write a -1 there to indicate it is alive and well
749          */
750         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
751         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
752
753         buf[0] = htonl(dma_high);       /* confirm addr MSW */
754         buf[1] = htonl(dma_low);        /* confirm addr LSW */
755         buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
756
757         /* FIX: All newest firmware should un-protect the bottom of
758          * the sram before handoff. However, the very first interfaces
759          * do not. Therefore the handoff copy must skip the first 8 bytes
760          */
761         buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
762         buf[4] = htonl(size - 8);       /* length of code */
763         buf[5] = htonl(8);      /* where to copy to */
764         buf[6] = htonl(0);      /* where to jump to */
765
766         submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
767
768         myri10ge_pio_copy(submit, &buf, sizeof(buf));
769         mb();
770         msleep(1);
771         mb();
772         i = 0;
773         while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
774                 msleep(1 << i);
775                 i++;
776         }
777         if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
778                 dev_err(&mgp->pdev->dev, "handoff failed\n");
779                 return -ENXIO;
780         }
781         myri10ge_dummy_rdma(mgp, 1);
782         status = myri10ge_get_firmware_capabilities(mgp);
783
784         return status;
785 }
786
787 static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
788 {
789         struct myri10ge_cmd cmd;
790         int status;
791
792         cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
793                      | (addr[2] << 8) | addr[3]);
794
795         cmd.data1 = ((addr[4] << 8) | (addr[5]));
796
797         status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
798         return status;
799 }
800
801 static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
802 {
803         struct myri10ge_cmd cmd;
804         int status, ctl;
805
806         ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
807         status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
808
809         if (status) {
810                 printk(KERN_ERR
811                        "myri10ge: %s: Failed to set flow control mode\n",
812                        mgp->dev->name);
813                 return status;
814         }
815         mgp->pause = pause;
816         return 0;
817 }
818
819 static void
820 myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
821 {
822         struct myri10ge_cmd cmd;
823         int status, ctl;
824
825         ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
826         status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
827         if (status)
828                 printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
829                        mgp->dev->name);
830 }
831
832 static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
833 {
834         struct myri10ge_cmd cmd;
835         int status;
836         u32 len;
837         struct page *dmatest_page;
838         dma_addr_t dmatest_bus;
839         char *test = " ";
840
841         dmatest_page = alloc_page(GFP_KERNEL);
842         if (!dmatest_page)
843                 return -ENOMEM;
844         dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
845                                    DMA_BIDIRECTIONAL);
846
847         /* Run a small DMA test.
848          * The magic multipliers to the length tell the firmware
849          * to do DMA read, write, or read+write tests.  The
850          * results are returned in cmd.data0.  The upper 16
851          * bits or the return is the number of transfers completed.
852          * The lower 16 bits is the time in 0.5us ticks that the
853          * transfers took to complete.
854          */
855
856         len = mgp->tx_boundary;
857
858         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
859         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
860         cmd.data2 = len * 0x10000;
861         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
862         if (status != 0) {
863                 test = "read";
864                 goto abort;
865         }
866         mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
867         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
868         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
869         cmd.data2 = len * 0x1;
870         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
871         if (status != 0) {
872                 test = "write";
873                 goto abort;
874         }
875         mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
876
877         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
878         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
879         cmd.data2 = len * 0x10001;
880         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
881         if (status != 0) {
882                 test = "read/write";
883                 goto abort;
884         }
885         mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
886             (cmd.data0 & 0xffff);
887
888 abort:
889         pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
890         put_page(dmatest_page);
891
892         if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
893                 dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
894                          test, status);
895
896         return status;
897 }
898
899 static int myri10ge_reset(struct myri10ge_priv *mgp)
900 {
901         struct myri10ge_cmd cmd;
902         struct myri10ge_slice_state *ss;
903         int i, status;
904         size_t bytes;
905 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
906         unsigned long dca_tag_off;
907 #endif
908
909         /* try to send a reset command to the card to see if it
910          * is alive */
911         memset(&cmd, 0, sizeof(cmd));
912         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
913         if (status != 0) {
914                 dev_err(&mgp->pdev->dev, "failed reset\n");
915                 return -ENXIO;
916         }
917
918         (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
919         /*
920          * Use non-ndis mcp_slot (eg, 4 bytes total,
921          * no toeplitz hash value returned.  Older firmware will
922          * not understand this command, but will use the correct
923          * sized mcp_slot, so we ignore error returns
924          */
925         cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
926         (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
927
928         /* Now exchange information about interrupts  */
929
930         bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
931         cmd.data0 = (u32) bytes;
932         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
933
934         /*
935          * Even though we already know how many slices are supported
936          * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
937          * has magic side effects, and must be called after a reset.
938          * It must be called prior to calling any RSS related cmds,
939          * including assigning an interrupt queue for anything but
940          * slice 0.  It must also be called *after*
941          * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
942          * the firmware to compute offsets.
943          */
944
945         if (mgp->num_slices > 1) {
946
947                 /* ask the maximum number of slices it supports */
948                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
949                                            &cmd, 0);
950                 if (status != 0) {
951                         dev_err(&mgp->pdev->dev,
952                                 "failed to get number of slices\n");
953                 }
954
955                 /*
956                  * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
957                  * to setting up the interrupt queue DMA
958                  */
959
960                 cmd.data0 = mgp->num_slices;
961                 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
962                 if (mgp->dev->real_num_tx_queues > 1)
963                         cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
964                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
965                                            &cmd, 0);
966
967                 /* Firmware older than 1.4.32 only supports multiple
968                  * RX queues, so if we get an error, first retry using a
969                  * single TX queue before giving up */
970                 if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
971                         mgp->dev->real_num_tx_queues = 1;
972                         cmd.data0 = mgp->num_slices;
973                         cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
974                         status = myri10ge_send_cmd(mgp,
975                                                    MXGEFW_CMD_ENABLE_RSS_QUEUES,
976                                                    &cmd, 0);
977                 }
978
979                 if (status != 0) {
980                         dev_err(&mgp->pdev->dev,
981                                 "failed to set number of slices\n");
982
983                         return status;
984                 }
985         }
986         for (i = 0; i < mgp->num_slices; i++) {
987                 ss = &mgp->ss[i];
988                 cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
989                 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
990                 cmd.data2 = i;
991                 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
992                                             &cmd, 0);
993         };
994
995         status |=
996             myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
997         for (i = 0; i < mgp->num_slices; i++) {
998                 ss = &mgp->ss[i];
999                 ss->irq_claim =
1000                     (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1001         }
1002         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1003                                     &cmd, 0);
1004         mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1005
1006         status |= myri10ge_send_cmd
1007             (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1008         mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1009         if (status != 0) {
1010                 dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1011                 return status;
1012         }
1013         put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1014
1015 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
1016         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1017         dca_tag_off = cmd.data0;
1018         for (i = 0; i < mgp->num_slices; i++) {
1019                 ss = &mgp->ss[i];
1020                 if (status == 0) {
1021                         ss->dca_tag = (__iomem __be32 *)
1022                             (mgp->sram + dca_tag_off + 4 * i);
1023                 } else {
1024                         ss->dca_tag = NULL;
1025                 }
1026         }
1027 #endif                          /* CONFIG_DCA */
1028
1029         /* reset mcp/driver shared state back to 0 */
1030
1031         mgp->link_changes = 0;
1032         for (i = 0; i < mgp->num_slices; i++) {
1033                 ss = &mgp->ss[i];
1034
1035                 memset(ss->rx_done.entry, 0, bytes);
1036                 ss->tx.req = 0;
1037                 ss->tx.done = 0;
1038                 ss->tx.pkt_start = 0;
1039                 ss->tx.pkt_done = 0;
1040                 ss->rx_big.cnt = 0;
1041                 ss->rx_small.cnt = 0;
1042                 ss->rx_done.idx = 0;
1043                 ss->rx_done.cnt = 0;
1044                 ss->tx.wake_queue = 0;
1045                 ss->tx.stop_queue = 0;
1046         }
1047
1048         status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1049         myri10ge_change_pause(mgp, mgp->pause);
1050         myri10ge_set_multicast_list(mgp->dev);
1051         return status;
1052 }
1053
1054 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
1055 static void
1056 myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1057 {
1058         ss->cpu = cpu;
1059         ss->cached_dca_tag = tag;
1060         put_be32(htonl(tag), ss->dca_tag);
1061 }
1062
1063 static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1064 {
1065         int cpu = get_cpu();
1066         int tag;
1067
1068         if (cpu != ss->cpu) {
1069                 tag = dca_get_tag(cpu);
1070                 if (ss->cached_dca_tag != tag)
1071                         myri10ge_write_dca(ss, cpu, tag);
1072         }
1073         put_cpu();
1074 }
1075
1076 static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1077 {
1078         int err, i;
1079         struct pci_dev *pdev = mgp->pdev;
1080
1081         if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1082                 return;
1083         if (!myri10ge_dca) {
1084                 dev_err(&pdev->dev, "dca disabled by administrator\n");
1085                 return;
1086         }
1087         err = dca_add_requester(&pdev->dev);
1088         if (err) {
1089                 if (err != -ENODEV)
1090                         dev_err(&pdev->dev,
1091                                 "dca_add_requester() failed, err=%d\n", err);
1092                 return;
1093         }
1094         mgp->dca_enabled = 1;
1095         for (i = 0; i < mgp->num_slices; i++)
1096                 myri10ge_write_dca(&mgp->ss[i], -1, 0);
1097 }
1098
1099 static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1100 {
1101         struct pci_dev *pdev = mgp->pdev;
1102         int err;
1103
1104         if (!mgp->dca_enabled)
1105                 return;
1106         mgp->dca_enabled = 0;
1107         err = dca_remove_requester(&pdev->dev);
1108 }
1109
1110 static int myri10ge_notify_dca_device(struct device *dev, void *data)
1111 {
1112         struct myri10ge_priv *mgp;
1113         unsigned long event;
1114
1115         mgp = dev_get_drvdata(dev);
1116         event = *(unsigned long *)data;
1117
1118         if (event == DCA_PROVIDER_ADD)
1119                 myri10ge_setup_dca(mgp);
1120         else if (event == DCA_PROVIDER_REMOVE)
1121                 myri10ge_teardown_dca(mgp);
1122         return 0;
1123 }
1124 #endif                          /* CONFIG_DCA */
1125
1126 static inline void
1127 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1128                     struct mcp_kreq_ether_recv *src)
1129 {
1130         __be32 low;
1131
1132         low = src->addr_low;
1133         src->addr_low = htonl(DMA_32BIT_MASK);
1134         myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1135         mb();
1136         myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1137         mb();
1138         src->addr_low = low;
1139         put_be32(low, &dst->addr_low);
1140         mb();
1141 }
1142
1143 static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1144 {
1145         struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1146
1147         if ((skb->protocol == htons(ETH_P_8021Q)) &&
1148             (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1149              vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1150                 skb->csum = hw_csum;
1151                 skb->ip_summed = CHECKSUM_COMPLETE;
1152         }
1153 }
1154
1155 static inline void
1156 myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
1157                       struct skb_frag_struct *rx_frags, int len, int hlen)
1158 {
1159         struct skb_frag_struct *skb_frags;
1160
1161         skb->len = skb->data_len = len;
1162         skb->truesize = len + sizeof(struct sk_buff);
1163         /* attach the page(s) */
1164
1165         skb_frags = skb_shinfo(skb)->frags;
1166         while (len > 0) {
1167                 memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
1168                 len -= rx_frags->size;
1169                 skb_frags++;
1170                 rx_frags++;
1171                 skb_shinfo(skb)->nr_frags++;
1172         }
1173
1174         /* pskb_may_pull is not available in irq context, but
1175          * skb_pull() (for ether_pad and eth_type_trans()) requires
1176          * the beginning of the packet in skb_headlen(), move it
1177          * manually */
1178         skb_copy_to_linear_data(skb, va, hlen);
1179         skb_shinfo(skb)->frags[0].page_offset += hlen;
1180         skb_shinfo(skb)->frags[0].size -= hlen;
1181         skb->data_len -= hlen;
1182         skb->tail += hlen;
1183         skb_pull(skb, MXGEFW_PAD);
1184 }
1185
1186 static void
1187 myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1188                         int bytes, int watchdog)
1189 {
1190         struct page *page;
1191         int idx;
1192
1193         if (unlikely(rx->watchdog_needed && !watchdog))
1194                 return;
1195
1196         /* try to refill entire ring */
1197         while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1198                 idx = rx->fill_cnt & rx->mask;
1199                 if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1200                         /* we can use part of previous page */
1201                         get_page(rx->page);
1202                 } else {
1203                         /* we need a new page */
1204                         page =
1205                             alloc_pages(GFP_ATOMIC | __GFP_COMP,
1206                                         MYRI10GE_ALLOC_ORDER);
1207                         if (unlikely(page == NULL)) {
1208                                 if (rx->fill_cnt - rx->cnt < 16)
1209                                         rx->watchdog_needed = 1;
1210                                 return;
1211                         }
1212                         rx->page = page;
1213                         rx->page_offset = 0;
1214                         rx->bus = pci_map_page(mgp->pdev, page, 0,
1215                                                MYRI10GE_ALLOC_SIZE,
1216                                                PCI_DMA_FROMDEVICE);
1217                 }
1218                 rx->info[idx].page = rx->page;
1219                 rx->info[idx].page_offset = rx->page_offset;
1220                 /* note that this is the address of the start of the
1221                  * page */
1222                 pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1223                 rx->shadow[idx].addr_low =
1224                     htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1225                 rx->shadow[idx].addr_high =
1226                     htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1227
1228                 /* start next packet on a cacheline boundary */
1229                 rx->page_offset += SKB_DATA_ALIGN(bytes);
1230
1231 #if MYRI10GE_ALLOC_SIZE > 4096
1232                 /* don't cross a 4KB boundary */
1233                 if ((rx->page_offset >> 12) !=
1234                     ((rx->page_offset + bytes - 1) >> 12))
1235                         rx->page_offset = (rx->page_offset + 4096) & ~4095;
1236 #endif
1237                 rx->fill_cnt++;
1238
1239                 /* copy 8 descriptors to the firmware at a time */
1240                 if ((idx & 7) == 7) {
1241                         myri10ge_submit_8rx(&rx->lanai[idx - 7],
1242                                             &rx->shadow[idx - 7]);
1243                 }
1244         }
1245 }
1246
1247 static inline void
1248 myri10ge_unmap_rx_page(struct pci_dev *pdev,
1249                        struct myri10ge_rx_buffer_state *info, int bytes)
1250 {
1251         /* unmap the recvd page if we're the only or last user of it */
1252         if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1253             (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1254                 pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
1255                                       & ~(MYRI10GE_ALLOC_SIZE - 1)),
1256                                MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1257         }
1258 }
1259
1260 #define MYRI10GE_HLEN 64        /* The number of bytes to copy from a
1261                                  * page into an skb */
1262
1263 static inline int
1264 myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
1265                  int bytes, int len, __wsum csum)
1266 {
1267         struct myri10ge_priv *mgp = ss->mgp;
1268         struct sk_buff *skb;
1269         struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
1270         int i, idx, hlen, remainder;
1271         struct pci_dev *pdev = mgp->pdev;
1272         struct net_device *dev = mgp->dev;
1273         u8 *va;
1274
1275         len += MXGEFW_PAD;
1276         idx = rx->cnt & rx->mask;
1277         va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1278         prefetch(va);
1279         /* Fill skb_frag_struct(s) with data from our receive */
1280         for (i = 0, remainder = len; remainder > 0; i++) {
1281                 myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1282                 rx_frags[i].page = rx->info[idx].page;
1283                 rx_frags[i].page_offset = rx->info[idx].page_offset;
1284                 if (remainder < MYRI10GE_ALLOC_SIZE)
1285                         rx_frags[i].size = remainder;
1286                 else
1287                         rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
1288                 rx->cnt++;
1289                 idx = rx->cnt & rx->mask;
1290                 remainder -= MYRI10GE_ALLOC_SIZE;
1291         }
1292
1293         if (mgp->csum_flag && myri10ge_lro) {
1294                 rx_frags[0].page_offset += MXGEFW_PAD;
1295                 rx_frags[0].size -= MXGEFW_PAD;
1296                 len -= MXGEFW_PAD;
1297                 lro_receive_frags(&ss->rx_done.lro_mgr, rx_frags,
1298                                   /* opaque, will come back in get_frag_header */
1299                                   len, len,
1300                                   (void *)(__force unsigned long)csum, csum);
1301
1302                 return 1;
1303         }
1304
1305         hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
1306
1307         /* allocate an skb to attach the page(s) to. This is done
1308          * after trying LRO, so as to avoid skb allocation overheads */
1309
1310         skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
1311         if (unlikely(skb == NULL)) {
1312                 mgp->stats.rx_dropped++;
1313                 do {
1314                         i--;
1315                         put_page(rx_frags[i].page);
1316                 } while (i != 0);
1317                 return 0;
1318         }
1319
1320         /* Attach the pages to the skb, and trim off any padding */
1321         myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
1322         if (skb_shinfo(skb)->frags[0].size <= 0) {
1323                 put_page(skb_shinfo(skb)->frags[0].page);
1324                 skb_shinfo(skb)->nr_frags = 0;
1325         }
1326         skb->protocol = eth_type_trans(skb, dev);
1327
1328         if (mgp->csum_flag) {
1329                 if ((skb->protocol == htons(ETH_P_IP)) ||
1330                     (skb->protocol == htons(ETH_P_IPV6))) {
1331                         skb->csum = csum;
1332                         skb->ip_summed = CHECKSUM_COMPLETE;
1333                 } else
1334                         myri10ge_vlan_ip_csum(skb, csum);
1335         }
1336         netif_receive_skb(skb);
1337         dev->last_rx = jiffies;
1338         return 1;
1339 }
1340
1341 static inline void
1342 myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1343 {
1344         struct pci_dev *pdev = ss->mgp->pdev;
1345         struct myri10ge_tx_buf *tx = &ss->tx;
1346         struct netdev_queue *dev_queue;
1347         struct sk_buff *skb;
1348         int idx, len;
1349
1350         while (tx->pkt_done != mcp_index) {
1351                 idx = tx->done & tx->mask;
1352                 skb = tx->info[idx].skb;
1353
1354                 /* Mark as free */
1355                 tx->info[idx].skb = NULL;
1356                 if (tx->info[idx].last) {
1357                         tx->pkt_done++;
1358                         tx->info[idx].last = 0;
1359                 }
1360                 tx->done++;
1361                 len = pci_unmap_len(&tx->info[idx], len);
1362                 pci_unmap_len_set(&tx->info[idx], len, 0);
1363                 if (skb) {
1364                         ss->stats.tx_bytes += skb->len;
1365                         ss->stats.tx_packets++;
1366                         dev_kfree_skb_irq(skb);
1367                         if (len)
1368                                 pci_unmap_single(pdev,
1369                                                  pci_unmap_addr(&tx->info[idx],
1370                                                                 bus), len,
1371                                                  PCI_DMA_TODEVICE);
1372                 } else {
1373                         if (len)
1374                                 pci_unmap_page(pdev,
1375                                                pci_unmap_addr(&tx->info[idx],
1376                                                               bus), len,
1377                                                PCI_DMA_TODEVICE);
1378                 }
1379         }
1380
1381         dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1382         /*
1383          * Make a minimal effort to prevent the NIC from polling an
1384          * idle tx queue.  If we can't get the lock we leave the queue
1385          * active. In this case, either a thread was about to start
1386          * using the queue anyway, or we lost a race and the NIC will
1387          * waste some of its resources polling an inactive queue for a
1388          * while.
1389          */
1390
1391         if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1392             __netif_tx_trylock(dev_queue)) {
1393                 if (tx->req == tx->done) {
1394                         tx->queue_active = 0;
1395                         put_be32(htonl(1), tx->send_stop);
1396                 }
1397                 __netif_tx_unlock(dev_queue);
1398         }
1399
1400         /* start the queue if we've stopped it */
1401         if (netif_tx_queue_stopped(dev_queue)
1402             && tx->req - tx->done < (tx->mask >> 1)) {
1403                 tx->wake_queue++;
1404                 netif_tx_wake_queue(dev_queue);
1405         }
1406 }
1407
1408 static inline int
1409 myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1410 {
1411         struct myri10ge_rx_done *rx_done = &ss->rx_done;
1412         struct myri10ge_priv *mgp = ss->mgp;
1413         unsigned long rx_bytes = 0;
1414         unsigned long rx_packets = 0;
1415         unsigned long rx_ok;
1416
1417         int idx = rx_done->idx;
1418         int cnt = rx_done->cnt;
1419         int work_done = 0;
1420         u16 length;
1421         __wsum checksum;
1422
1423         while (rx_done->entry[idx].length != 0 && work_done < budget) {
1424                 length = ntohs(rx_done->entry[idx].length);
1425                 rx_done->entry[idx].length = 0;
1426                 checksum = csum_unfold(rx_done->entry[idx].checksum);
1427                 if (length <= mgp->small_bytes)
1428                         rx_ok = myri10ge_rx_done(ss, &ss->rx_small,
1429                                                  mgp->small_bytes,
1430                                                  length, checksum);
1431                 else
1432                         rx_ok = myri10ge_rx_done(ss, &ss->rx_big,
1433                                                  mgp->big_bytes,
1434                                                  length, checksum);
1435                 rx_packets += rx_ok;
1436                 rx_bytes += rx_ok * (unsigned long)length;
1437                 cnt++;
1438                 idx = cnt & (mgp->max_intr_slots - 1);
1439                 work_done++;
1440         }
1441         rx_done->idx = idx;
1442         rx_done->cnt = cnt;
1443         ss->stats.rx_packets += rx_packets;
1444         ss->stats.rx_bytes += rx_bytes;
1445
1446         if (myri10ge_lro)
1447                 lro_flush_all(&rx_done->lro_mgr);
1448
1449         /* restock receive rings if needed */
1450         if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1451                 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1452                                         mgp->small_bytes + MXGEFW_PAD, 0);
1453         if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1454                 myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1455
1456         return work_done;
1457 }
1458
1459 static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1460 {
1461         struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1462
1463         if (unlikely(stats->stats_updated)) {
1464                 unsigned link_up = ntohl(stats->link_up);
1465                 if (mgp->link_state != link_up) {
1466                         mgp->link_state = link_up;
1467
1468                         if (mgp->link_state == MXGEFW_LINK_UP) {
1469                                 if (netif_msg_link(mgp))
1470                                         printk(KERN_INFO
1471                                                "myri10ge: %s: link up\n",
1472                                                mgp->dev->name);
1473                                 netif_carrier_on(mgp->dev);
1474                                 mgp->link_changes++;
1475                         } else {
1476                                 if (netif_msg_link(mgp))
1477                                         printk(KERN_INFO
1478                                                "myri10ge: %s: link %s\n",
1479                                                mgp->dev->name,
1480                                                (link_up == MXGEFW_LINK_MYRINET ?
1481                                                 "mismatch (Myrinet detected)" :
1482                                                 "down"));
1483                                 netif_carrier_off(mgp->dev);
1484                                 mgp->link_changes++;
1485                         }
1486                 }
1487                 if (mgp->rdma_tags_available !=
1488                     ntohl(stats->rdma_tags_available)) {
1489                         mgp->rdma_tags_available =
1490                             ntohl(stats->rdma_tags_available);
1491                         printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
1492                                "%d tags left\n", mgp->dev->name,
1493                                mgp->rdma_tags_available);
1494                 }
1495                 mgp->down_cnt += stats->link_down;
1496                 if (stats->link_down)
1497                         wake_up(&mgp->down_wq);
1498         }
1499 }
1500
1501 static int myri10ge_poll(struct napi_struct *napi, int budget)
1502 {
1503         struct myri10ge_slice_state *ss =
1504             container_of(napi, struct myri10ge_slice_state, napi);
1505         struct net_device *netdev = ss->mgp->dev;
1506         int work_done;
1507
1508 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
1509         if (ss->mgp->dca_enabled)
1510                 myri10ge_update_dca(ss);
1511 #endif
1512
1513         /* process as many rx events as NAPI will allow */
1514         work_done = myri10ge_clean_rx_done(ss, budget);
1515
1516         if (work_done < budget) {
1517                 netif_rx_complete(netdev, napi);
1518                 put_be32(htonl(3), ss->irq_claim);
1519         }
1520         return work_done;
1521 }
1522
1523 static irqreturn_t myri10ge_intr(int irq, void *arg)
1524 {
1525         struct myri10ge_slice_state *ss = arg;
1526         struct myri10ge_priv *mgp = ss->mgp;
1527         struct mcp_irq_data *stats = ss->fw_stats;
1528         struct myri10ge_tx_buf *tx = &ss->tx;
1529         u32 send_done_count;
1530         int i;
1531
1532         /* an interrupt on a non-zero receive-only slice is implicitly
1533          * valid  since MSI-X irqs are not shared */
1534         if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1535                 netif_rx_schedule(ss->dev, &ss->napi);
1536                 return (IRQ_HANDLED);
1537         }
1538
1539         /* make sure it is our IRQ, and that the DMA has finished */
1540         if (unlikely(!stats->valid))
1541                 return (IRQ_NONE);
1542
1543         /* low bit indicates receives are present, so schedule
1544          * napi poll handler */
1545         if (stats->valid & 1)
1546                 netif_rx_schedule(ss->dev, &ss->napi);
1547
1548         if (!mgp->msi_enabled && !mgp->msix_enabled) {
1549                 put_be32(0, mgp->irq_deassert);
1550                 if (!myri10ge_deassert_wait)
1551                         stats->valid = 0;
1552                 mb();
1553         } else
1554                 stats->valid = 0;
1555
1556         /* Wait for IRQ line to go low, if using INTx */
1557         i = 0;
1558         while (1) {
1559                 i++;
1560                 /* check for transmit completes and receives */
1561                 send_done_count = ntohl(stats->send_done_count);
1562                 if (send_done_count != tx->pkt_done)
1563                         myri10ge_tx_done(ss, (int)send_done_count);
1564                 if (unlikely(i > myri10ge_max_irq_loops)) {
1565                         printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
1566                                mgp->dev->name);
1567                         stats->valid = 0;
1568                         schedule_work(&mgp->watchdog_work);
1569                 }
1570                 if (likely(stats->valid == 0))
1571                         break;
1572                 cpu_relax();
1573                 barrier();
1574         }
1575
1576         /* Only slice 0 updates stats */
1577         if (ss == mgp->ss)
1578                 myri10ge_check_statblock(mgp);
1579
1580         put_be32(htonl(3), ss->irq_claim + 1);
1581         return (IRQ_HANDLED);
1582 }
1583
1584 static int
1585 myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
1586 {
1587         struct myri10ge_priv *mgp = netdev_priv(netdev);
1588         char *ptr;
1589         int i;
1590
1591         cmd->autoneg = AUTONEG_DISABLE;
1592         cmd->speed = SPEED_10000;
1593         cmd->duplex = DUPLEX_FULL;
1594
1595         /*
1596          * parse the product code to deterimine the interface type
1597          * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1598          * after the 3rd dash in the driver's cached copy of the
1599          * EEPROM's product code string.
1600          */
1601         ptr = mgp->product_code_string;
1602         if (ptr == NULL) {
1603                 printk(KERN_ERR "myri10ge: %s: Missing product code\n",
1604                        netdev->name);
1605                 return 0;
1606         }
1607         for (i = 0; i < 3; i++, ptr++) {
1608                 ptr = strchr(ptr, '-');
1609                 if (ptr == NULL) {
1610                         printk(KERN_ERR "myri10ge: %s: Invalid product "
1611                                "code %s\n", netdev->name,
1612                                mgp->product_code_string);
1613                         return 0;
1614                 }
1615         }
1616         if (*ptr == 'R' || *ptr == 'Q') {
1617                 /* We've found either an XFP or quad ribbon fiber */
1618                 cmd->port = PORT_FIBRE;
1619         }
1620         return 0;
1621 }
1622
1623 static void
1624 myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1625 {
1626         struct myri10ge_priv *mgp = netdev_priv(netdev);
1627
1628         strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1629         strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1630         strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1631         strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1632 }
1633
1634 static int
1635 myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1636 {
1637         struct myri10ge_priv *mgp = netdev_priv(netdev);
1638
1639         coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1640         return 0;
1641 }
1642
1643 static int
1644 myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1645 {
1646         struct myri10ge_priv *mgp = netdev_priv(netdev);
1647
1648         mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1649         put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1650         return 0;
1651 }
1652
1653 static void
1654 myri10ge_get_pauseparam(struct net_device *netdev,
1655                         struct ethtool_pauseparam *pause)
1656 {
1657         struct myri10ge_priv *mgp = netdev_priv(netdev);
1658
1659         pause->autoneg = 0;
1660         pause->rx_pause = mgp->pause;
1661         pause->tx_pause = mgp->pause;
1662 }
1663
1664 static int
1665 myri10ge_set_pauseparam(struct net_device *netdev,
1666                         struct ethtool_pauseparam *pause)
1667 {
1668         struct myri10ge_priv *mgp = netdev_priv(netdev);
1669
1670         if (pause->tx_pause != mgp->pause)
1671                 return myri10ge_change_pause(mgp, pause->tx_pause);
1672         if (pause->rx_pause != mgp->pause)
1673                 return myri10ge_change_pause(mgp, pause->tx_pause);
1674         if (pause->autoneg != 0)
1675                 return -EINVAL;
1676         return 0;
1677 }
1678
1679 static void
1680 myri10ge_get_ringparam(struct net_device *netdev,
1681                        struct ethtool_ringparam *ring)
1682 {
1683         struct myri10ge_priv *mgp = netdev_priv(netdev);
1684
1685         ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1686         ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1687         ring->rx_jumbo_max_pending = 0;
1688         ring->tx_max_pending = mgp->ss[0].rx_small.mask + 1;
1689         ring->rx_mini_pending = ring->rx_mini_max_pending;
1690         ring->rx_pending = ring->rx_max_pending;
1691         ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1692         ring->tx_pending = ring->tx_max_pending;
1693 }
1694
1695 static u32 myri10ge_get_rx_csum(struct net_device *netdev)
1696 {
1697         struct myri10ge_priv *mgp = netdev_priv(netdev);
1698
1699         if (mgp->csum_flag)
1700                 return 1;
1701         else
1702                 return 0;
1703 }
1704
1705 static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
1706 {
1707         struct myri10ge_priv *mgp = netdev_priv(netdev);
1708
1709         if (csum_enabled)
1710                 mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
1711         else
1712                 mgp->csum_flag = 0;
1713         return 0;
1714 }
1715
1716 static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
1717 {
1718         struct myri10ge_priv *mgp = netdev_priv(netdev);
1719         unsigned long flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
1720
1721         if (tso_enabled)
1722                 netdev->features |= flags;
1723         else
1724                 netdev->features &= ~flags;
1725         return 0;
1726 }
1727
1728 static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1729         "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1730         "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1731         "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1732         "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1733         "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1734         "tx_heartbeat_errors", "tx_window_errors",
1735         /* device-specific stats */
1736         "tx_boundary", "WC", "irq", "MSI", "MSIX",
1737         "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1738         "serial_number", "watchdog_resets",
1739 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
1740         "dca_capable_firmware", "dca_device_present",
1741 #endif
1742         "link_changes", "link_up", "dropped_link_overflow",
1743         "dropped_link_error_or_filtered",
1744         "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1745         "dropped_unicast_filtered", "dropped_multicast_filtered",
1746         "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1747         "dropped_no_big_buffer"
1748 };
1749
1750 static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1751         "----------- slice ---------",
1752         "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1753         "rx_small_cnt", "rx_big_cnt",
1754         "wake_queue", "stop_queue", "tx_linearized", "LRO aggregated",
1755             "LRO flushed",
1756         "LRO avg aggr", "LRO no_desc"
1757 };
1758
1759 #define MYRI10GE_NET_STATS_LEN      21
1760 #define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1761 #define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1762
1763 static void
1764 myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1765 {
1766         struct myri10ge_priv *mgp = netdev_priv(netdev);
1767         int i;
1768
1769         switch (stringset) {
1770         case ETH_SS_STATS:
1771                 memcpy(data, *myri10ge_gstrings_main_stats,
1772                        sizeof(myri10ge_gstrings_main_stats));
1773                 data += sizeof(myri10ge_gstrings_main_stats);
1774                 for (i = 0; i < mgp->num_slices; i++) {
1775                         memcpy(data, *myri10ge_gstrings_slice_stats,
1776                                sizeof(myri10ge_gstrings_slice_stats));
1777                         data += sizeof(myri10ge_gstrings_slice_stats);
1778                 }
1779                 break;
1780         }
1781 }
1782
1783 static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1784 {
1785         struct myri10ge_priv *mgp = netdev_priv(netdev);
1786
1787         switch (sset) {
1788         case ETH_SS_STATS:
1789                 return MYRI10GE_MAIN_STATS_LEN +
1790                     mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1791         default:
1792                 return -EOPNOTSUPP;
1793         }
1794 }
1795
1796 static void
1797 myri10ge_get_ethtool_stats(struct net_device *netdev,
1798                            struct ethtool_stats *stats, u64 * data)
1799 {
1800         struct myri10ge_priv *mgp = netdev_priv(netdev);
1801         struct myri10ge_slice_state *ss;
1802         int slice;
1803         int i;
1804
1805         for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1806                 data[i] = ((unsigned long *)&mgp->stats)[i];
1807
1808         data[i++] = (unsigned int)mgp->tx_boundary;
1809         data[i++] = (unsigned int)mgp->wc_enabled;
1810         data[i++] = (unsigned int)mgp->pdev->irq;
1811         data[i++] = (unsigned int)mgp->msi_enabled;
1812         data[i++] = (unsigned int)mgp->msix_enabled;
1813         data[i++] = (unsigned int)mgp->read_dma;
1814         data[i++] = (unsigned int)mgp->write_dma;
1815         data[i++] = (unsigned int)mgp->read_write_dma;
1816         data[i++] = (unsigned int)mgp->serial_number;
1817         data[i++] = (unsigned int)mgp->watchdog_resets;
1818 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
1819         data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1820         data[i++] = (unsigned int)(mgp->dca_enabled);
1821 #endif
1822         data[i++] = (unsigned int)mgp->link_changes;
1823
1824         /* firmware stats are useful only in the first slice */
1825         ss = &mgp->ss[0];
1826         data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1827         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1828         data[i++] =
1829             (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1830         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1831         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1832         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1833         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1834         data[i++] =
1835             (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1836         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1837         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
1838         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
1839         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
1840
1841         for (slice = 0; slice < mgp->num_slices; slice++) {
1842                 ss = &mgp->ss[slice];
1843                 data[i++] = slice;
1844                 data[i++] = (unsigned int)ss->tx.pkt_start;
1845                 data[i++] = (unsigned int)ss->tx.pkt_done;
1846                 data[i++] = (unsigned int)ss->tx.req;
1847                 data[i++] = (unsigned int)ss->tx.done;
1848                 data[i++] = (unsigned int)ss->rx_small.cnt;
1849                 data[i++] = (unsigned int)ss->rx_big.cnt;
1850                 data[i++] = (unsigned int)ss->tx.wake_queue;
1851                 data[i++] = (unsigned int)ss->tx.stop_queue;
1852                 data[i++] = (unsigned int)ss->tx.linearized;
1853                 data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
1854                 data[i++] = ss->rx_done.lro_mgr.stats.flushed;
1855                 if (ss->rx_done.lro_mgr.stats.flushed)
1856                         data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
1857                             ss->rx_done.lro_mgr.stats.flushed;
1858                 else
1859                         data[i++] = 0;
1860                 data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
1861         }
1862 }
1863
1864 static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
1865 {
1866         struct myri10ge_priv *mgp = netdev_priv(netdev);
1867         mgp->msg_enable = value;
1868 }
1869
1870 static u32 myri10ge_get_msglevel(struct net_device *netdev)
1871 {
1872         struct myri10ge_priv *mgp = netdev_priv(netdev);
1873         return mgp->msg_enable;
1874 }
1875
1876 static const struct ethtool_ops myri10ge_ethtool_ops = {
1877         .get_settings = myri10ge_get_settings,
1878         .get_drvinfo = myri10ge_get_drvinfo,
1879         .get_coalesce = myri10ge_get_coalesce,
1880         .set_coalesce = myri10ge_set_coalesce,
1881         .get_pauseparam = myri10ge_get_pauseparam,
1882         .set_pauseparam = myri10ge_set_pauseparam,
1883         .get_ringparam = myri10ge_get_ringparam,
1884         .get_rx_csum = myri10ge_get_rx_csum,
1885         .set_rx_csum = myri10ge_set_rx_csum,
1886         .set_tx_csum = ethtool_op_set_tx_hw_csum,
1887         .set_sg = ethtool_op_set_sg,
1888         .set_tso = myri10ge_set_tso,
1889         .get_link = ethtool_op_get_link,
1890         .get_strings = myri10ge_get_strings,
1891         .get_sset_count = myri10ge_get_sset_count,
1892         .get_ethtool_stats = myri10ge_get_ethtool_stats,
1893         .set_msglevel = myri10ge_set_msglevel,
1894         .get_msglevel = myri10ge_get_msglevel
1895 };
1896
1897 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
1898 {
1899         struct myri10ge_priv *mgp = ss->mgp;
1900         struct myri10ge_cmd cmd;
1901         struct net_device *dev = mgp->dev;
1902         int tx_ring_size, rx_ring_size;
1903         int tx_ring_entries, rx_ring_entries;
1904         int i, slice, status;
1905         size_t bytes;
1906
1907         /* get ring sizes */
1908         slice = ss - mgp->ss;
1909         cmd.data0 = slice;
1910         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
1911         tx_ring_size = cmd.data0;
1912         cmd.data0 = slice;
1913         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
1914         if (status != 0)
1915                 return status;
1916         rx_ring_size = cmd.data0;
1917
1918         tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
1919         rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
1920         ss->tx.mask = tx_ring_entries - 1;
1921         ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
1922
1923         status = -ENOMEM;
1924
1925         /* allocate the host shadow rings */
1926
1927         bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
1928             * sizeof(*ss->tx.req_list);
1929         ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
1930         if (ss->tx.req_bytes == NULL)
1931                 goto abort_with_nothing;
1932
1933         /* ensure req_list entries are aligned to 8 bytes */
1934         ss->tx.req_list = (struct mcp_kreq_ether_send *)
1935             ALIGN((unsigned long)ss->tx.req_bytes, 8);
1936         ss->tx.queue_active = 0;
1937
1938         bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
1939         ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
1940         if (ss->rx_small.shadow == NULL)
1941                 goto abort_with_tx_req_bytes;
1942
1943         bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
1944         ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
1945         if (ss->rx_big.shadow == NULL)
1946                 goto abort_with_rx_small_shadow;
1947
1948         /* allocate the host info rings */
1949
1950         bytes = tx_ring_entries * sizeof(*ss->tx.info);
1951         ss->tx.info = kzalloc(bytes, GFP_KERNEL);
1952         if (ss->tx.info == NULL)
1953                 goto abort_with_rx_big_shadow;
1954
1955         bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
1956         ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
1957         if (ss->rx_small.info == NULL)
1958                 goto abort_with_tx_info;
1959
1960         bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
1961         ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
1962         if (ss->rx_big.info == NULL)
1963                 goto abort_with_rx_small_info;
1964
1965         /* Fill the receive rings */
1966         ss->rx_big.cnt = 0;
1967         ss->rx_small.cnt = 0;
1968         ss->rx_big.fill_cnt = 0;
1969         ss->rx_small.fill_cnt = 0;
1970         ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
1971         ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
1972         ss->rx_small.watchdog_needed = 0;
1973         ss->rx_big.watchdog_needed = 0;
1974         myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1975                                 mgp->small_bytes + MXGEFW_PAD, 0);
1976
1977         if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
1978                 printk(KERN_ERR
1979                        "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
1980                        dev->name, slice, ss->rx_small.fill_cnt);
1981                 goto abort_with_rx_small_ring;
1982         }
1983
1984         myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1985         if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
1986                 printk(KERN_ERR
1987                        "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
1988                        dev->name, slice, ss->rx_big.fill_cnt);
1989                 goto abort_with_rx_big_ring;
1990         }
1991
1992         return 0;
1993
1994 abort_with_rx_big_ring:
1995         for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
1996                 int idx = i & ss->rx_big.mask;
1997                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
1998                                        mgp->big_bytes);
1999                 put_page(ss->rx_big.info[idx].page);
2000         }
2001
2002 abort_with_rx_small_ring:
2003         for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2004                 int idx = i & ss->rx_small.mask;
2005                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2006                                        mgp->small_bytes + MXGEFW_PAD);
2007                 put_page(ss->rx_small.info[idx].page);
2008         }
2009
2010         kfree(ss->rx_big.info);
2011
2012 abort_with_rx_small_info:
2013         kfree(ss->rx_small.info);
2014
2015 abort_with_tx_info:
2016         kfree(ss->tx.info);
2017
2018 abort_with_rx_big_shadow:
2019         kfree(ss->rx_big.shadow);
2020
2021 abort_with_rx_small_shadow:
2022         kfree(ss->rx_small.shadow);
2023
2024 abort_with_tx_req_bytes:
2025         kfree(ss->tx.req_bytes);
2026         ss->tx.req_bytes = NULL;
2027         ss->tx.req_list = NULL;
2028
2029 abort_with_nothing:
2030         return status;
2031 }
2032
2033 static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2034 {
2035         struct myri10ge_priv *mgp = ss->mgp;
2036         struct sk_buff *skb;
2037         struct myri10ge_tx_buf *tx;
2038         int i, len, idx;
2039
2040         /* If not allocated, skip it */
2041         if (ss->tx.req_list == NULL)
2042                 return;
2043
2044         for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2045                 idx = i & ss->rx_big.mask;
2046                 if (i == ss->rx_big.fill_cnt - 1)
2047                         ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2048                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2049                                        mgp->big_bytes);
2050                 put_page(ss->rx_big.info[idx].page);
2051         }
2052
2053         for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2054                 idx = i & ss->rx_small.mask;
2055                 if (i == ss->rx_small.fill_cnt - 1)
2056                         ss->rx_small.info[idx].page_offset =
2057                             MYRI10GE_ALLOC_SIZE;
2058                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2059                                        mgp->small_bytes + MXGEFW_PAD);
2060                 put_page(ss->rx_small.info[idx].page);
2061         }
2062         tx = &ss->tx;
2063         while (tx->done != tx->req) {
2064                 idx = tx->done & tx->mask;
2065                 skb = tx->info[idx].skb;
2066
2067                 /* Mark as free */
2068                 tx->info[idx].skb = NULL;
2069                 tx->done++;
2070                 len = pci_unmap_len(&tx->info[idx], len);
2071                 pci_unmap_len_set(&tx->info[idx], len, 0);
2072                 if (skb) {
2073                         ss->stats.tx_dropped++;
2074                         dev_kfree_skb_any(skb);
2075                         if (len)
2076                                 pci_unmap_single(mgp->pdev,
2077                                                  pci_unmap_addr(&tx->info[idx],
2078                                                                 bus), len,
2079                                                  PCI_DMA_TODEVICE);
2080                 } else {
2081                         if (len)
2082                                 pci_unmap_page(mgp->pdev,
2083                                                pci_unmap_addr(&tx->info[idx],
2084                                                               bus), len,
2085                                                PCI_DMA_TODEVICE);
2086                 }
2087         }
2088         kfree(ss->rx_big.info);
2089
2090         kfree(ss->rx_small.info);
2091
2092         kfree(ss->tx.info);
2093
2094         kfree(ss->rx_big.shadow);
2095
2096         kfree(ss->rx_small.shadow);
2097
2098         kfree(ss->tx.req_bytes);
2099         ss->tx.req_bytes = NULL;
2100         ss->tx.req_list = NULL;
2101 }
2102
2103 static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2104 {
2105         struct pci_dev *pdev = mgp->pdev;
2106         struct myri10ge_slice_state *ss;
2107         struct net_device *netdev = mgp->dev;
2108         int i;
2109         int status;
2110
2111         mgp->msi_enabled = 0;
2112         mgp->msix_enabled = 0;
2113         status = 0;
2114         if (myri10ge_msi) {
2115                 if (mgp->num_slices > 1) {
2116                         status =
2117                             pci_enable_msix(pdev, mgp->msix_vectors,
2118                                             mgp->num_slices);
2119                         if (status == 0) {
2120                                 mgp->msix_enabled = 1;
2121                         } else {
2122                                 dev_err(&pdev->dev,
2123                                         "Error %d setting up MSI-X\n", status);
2124                                 return status;
2125                         }
2126                 }
2127                 if (mgp->msix_enabled == 0) {
2128                         status = pci_enable_msi(pdev);
2129                         if (status != 0) {
2130                                 dev_err(&pdev->dev,
2131                                         "Error %d setting up MSI; falling back to xPIC\n",
2132                                         status);
2133                         } else {
2134                                 mgp->msi_enabled = 1;
2135                         }
2136                 }
2137         }
2138         if (mgp->msix_enabled) {
2139                 for (i = 0; i < mgp->num_slices; i++) {
2140                         ss = &mgp->ss[i];
2141                         snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2142                                  "%s:slice-%d", netdev->name, i);
2143                         status = request_irq(mgp->msix_vectors[i].vector,
2144                                              myri10ge_intr, 0, ss->irq_desc,
2145                                              ss);
2146                         if (status != 0) {
2147                                 dev_err(&pdev->dev,
2148                                         "slice %d failed to allocate IRQ\n", i);
2149                                 i--;
2150                                 while (i >= 0) {
2151                                         free_irq(mgp->msix_vectors[i].vector,
2152                                                  &mgp->ss[i]);
2153                                         i--;
2154                                 }
2155                                 pci_disable_msix(pdev);
2156                                 return status;
2157                         }
2158                 }
2159         } else {
2160                 status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2161                                      mgp->dev->name, &mgp->ss[0]);
2162                 if (status != 0) {
2163                         dev_err(&pdev->dev, "failed to allocate IRQ\n");
2164                         if (mgp->msi_enabled)
2165                                 pci_disable_msi(pdev);
2166                 }
2167         }
2168         return status;
2169 }
2170
2171 static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2172 {
2173         struct pci_dev *pdev = mgp->pdev;
2174         int i;
2175
2176         if (mgp->msix_enabled) {
2177                 for (i = 0; i < mgp->num_slices; i++)
2178                         free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2179         } else {
2180                 free_irq(pdev->irq, &mgp->ss[0]);
2181         }
2182         if (mgp->msi_enabled)
2183                 pci_disable_msi(pdev);
2184         if (mgp->msix_enabled)
2185                 pci_disable_msix(pdev);
2186 }
2187
2188 static int
2189 myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
2190                          void **ip_hdr, void **tcpudp_hdr,
2191                          u64 * hdr_flags, void *priv)
2192 {
2193         struct ethhdr *eh;
2194         struct vlan_ethhdr *veh;
2195         struct iphdr *iph;
2196         u8 *va = page_address(frag->page) + frag->page_offset;
2197         unsigned long ll_hlen;
2198         /* passed opaque through lro_receive_frags() */
2199         __wsum csum = (__force __wsum) (unsigned long)priv;
2200
2201         /* find the mac header, aborting if not IPv4 */
2202
2203         eh = (struct ethhdr *)va;
2204         *mac_hdr = eh;
2205         ll_hlen = ETH_HLEN;
2206         if (eh->h_proto != htons(ETH_P_IP)) {
2207                 if (eh->h_proto == htons(ETH_P_8021Q)) {
2208                         veh = (struct vlan_ethhdr *)va;
2209                         if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
2210                                 return -1;
2211
2212                         ll_hlen += VLAN_HLEN;
2213
2214                         /*
2215                          *  HW checksum starts ETH_HLEN bytes into
2216                          *  frame, so we must subtract off the VLAN
2217                          *  header's checksum before csum can be used
2218                          */
2219                         csum = csum_sub(csum, csum_partial(va + ETH_HLEN,
2220                                                            VLAN_HLEN, 0));
2221                 } else {
2222                         return -1;
2223                 }
2224         }
2225         *hdr_flags = LRO_IPV4;
2226
2227         iph = (struct iphdr *)(va + ll_hlen);
2228         *ip_hdr = iph;
2229         if (iph->protocol != IPPROTO_TCP)
2230                 return -1;
2231         *hdr_flags |= LRO_TCP;
2232         *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
2233
2234         /* verify the IP checksum */
2235         if (unlikely(ip_fast_csum((u8 *) iph, iph->ihl)))
2236                 return -1;
2237
2238         /* verify the  checksum */
2239         if (unlikely(csum_tcpudp_magic(iph->saddr, iph->daddr,
2240                                        ntohs(iph->tot_len) - (iph->ihl << 2),
2241                                        IPPROTO_TCP, csum)))
2242                 return -1;
2243
2244         return 0;
2245 }
2246
2247 static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2248 {
2249         struct myri10ge_cmd cmd;
2250         struct myri10ge_slice_state *ss;
2251         int status;
2252
2253         ss = &mgp->ss[slice];
2254         status = 0;
2255         if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2256                 cmd.data0 = slice;
2257                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2258                                            &cmd, 0);
2259                 ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2260                     (mgp->sram + cmd.data0);
2261         }
2262         cmd.data0 = slice;
2263         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2264                                     &cmd, 0);
2265         ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2266             (mgp->sram + cmd.data0);
2267
2268         cmd.data0 = slice;
2269         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2270         ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2271             (mgp->sram + cmd.data0);
2272
2273         ss->tx.send_go = (__iomem __be32 *)
2274             (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2275         ss->tx.send_stop = (__iomem __be32 *)
2276             (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2277         return status;
2278
2279 }
2280
2281 static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2282 {
2283         struct myri10ge_cmd cmd;
2284         struct myri10ge_slice_state *ss;
2285         int status;
2286
2287         ss = &mgp->ss[slice];
2288         cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2289         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2290         cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2291         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2292         if (status == -ENOSYS) {
2293                 dma_addr_t bus = ss->fw_stats_bus;
2294                 if (slice != 0)
2295                         return -EINVAL;
2296                 bus += offsetof(struct mcp_irq_data, send_done_count);
2297                 cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2298                 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2299                 status = myri10ge_send_cmd(mgp,
2300                                            MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2301                                            &cmd, 0);
2302                 /* Firmware cannot support multicast without STATS_DMA_V2 */
2303                 mgp->fw_multicast_support = 0;
2304         } else {
2305                 mgp->fw_multicast_support = 1;
2306         }
2307         return 0;
2308 }
2309
2310 static int myri10ge_open(struct net_device *dev)
2311 {
2312         struct myri10ge_slice_state *ss;
2313         struct myri10ge_priv *mgp = netdev_priv(dev);
2314         struct myri10ge_cmd cmd;
2315         int i, status, big_pow2, slice;
2316         u8 *itable;
2317         struct net_lro_mgr *lro_mgr;
2318
2319         if (mgp->running != MYRI10GE_ETH_STOPPED)
2320                 return -EBUSY;
2321
2322         mgp->running = MYRI10GE_ETH_STARTING;
2323         status = myri10ge_reset(mgp);
2324         if (status != 0) {
2325                 printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
2326                 goto abort_with_nothing;
2327         }
2328
2329         if (mgp->num_slices > 1) {
2330                 cmd.data0 = mgp->num_slices;
2331                 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2332                 if (mgp->dev->real_num_tx_queues > 1)
2333                         cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2334                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2335                                            &cmd, 0);
2336                 if (status != 0) {
2337                         printk(KERN_ERR
2338                                "myri10ge: %s: failed to set number of slices\n",
2339                                dev->name);
2340                         goto abort_with_nothing;
2341                 }
2342                 /* setup the indirection table */
2343                 cmd.data0 = mgp->num_slices;
2344                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2345                                            &cmd, 0);
2346
2347                 status |= myri10ge_send_cmd(mgp,
2348                                             MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2349                                             &cmd, 0);
2350                 if (status != 0) {
2351                         printk(KERN_ERR
2352                                "myri10ge: %s: failed to setup rss tables\n",
2353                                dev->name);
2354                         goto abort_with_nothing;
2355                 }
2356
2357                 /* just enable an identity mapping */
2358                 itable = mgp->sram + cmd.data0;
2359                 for (i = 0; i < mgp->num_slices; i++)
2360                         __raw_writeb(i, &itable[i]);
2361
2362                 cmd.data0 = 1;
2363                 cmd.data1 = myri10ge_rss_hash;
2364                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2365                                            &cmd, 0);
2366                 if (status != 0) {
2367                         printk(KERN_ERR
2368                                "myri10ge: %s: failed to enable slices\n",
2369                                dev->name);
2370                         goto abort_with_nothing;
2371                 }
2372         }
2373
2374         status = myri10ge_request_irq(mgp);
2375         if (status != 0)
2376                 goto abort_with_nothing;
2377
2378         /* decide what small buffer size to use.  For good TCP rx
2379          * performance, it is important to not receive 1514 byte
2380          * frames into jumbo buffers, as it confuses the socket buffer
2381          * accounting code, leading to drops and erratic performance.
2382          */
2383
2384         if (dev->mtu <= ETH_DATA_LEN)
2385                 /* enough for a TCP header */
2386                 mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2387                     ? (128 - MXGEFW_PAD)
2388                     : (SMP_CACHE_BYTES - MXGEFW_PAD);
2389         else
2390                 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2391                 mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2392
2393         /* Override the small buffer size? */
2394         if (myri10ge_small_bytes > 0)
2395                 mgp->small_bytes = myri10ge_small_bytes;
2396
2397         /* Firmware needs the big buff size as a power of 2.  Lie and
2398          * tell him the buffer is larger, because we only use 1
2399          * buffer/pkt, and the mtu will prevent overruns.
2400          */
2401         big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2402         if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2403                 while (!is_power_of_2(big_pow2))
2404                         big_pow2++;
2405                 mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2406         } else {
2407                 big_pow2 = MYRI10GE_ALLOC_SIZE;
2408                 mgp->big_bytes = big_pow2;
2409         }
2410
2411         /* setup the per-slice data structures */
2412         for (slice = 0; slice < mgp->num_slices; slice++) {
2413                 ss = &mgp->ss[slice];
2414
2415                 status = myri10ge_get_txrx(mgp, slice);
2416                 if (status != 0) {
2417                         printk(KERN_ERR
2418                                "myri10ge: %s: failed to get ring sizes or locations\n",
2419                                dev->name);
2420                         goto abort_with_rings;
2421                 }
2422                 status = myri10ge_allocate_rings(ss);
2423                 if (status != 0)
2424                         goto abort_with_rings;
2425
2426                 /* only firmware which supports multiple TX queues
2427                  * supports setting up the tx stats on non-zero
2428                  * slices */
2429                 if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2430                         status = myri10ge_set_stats(mgp, slice);
2431                 if (status) {
2432                         printk(KERN_ERR
2433                                "myri10ge: %s: Couldn't set stats DMA\n",
2434                                dev->name);
2435                         goto abort_with_rings;
2436                 }
2437
2438                 lro_mgr = &ss->rx_done.lro_mgr;
2439                 lro_mgr->dev = dev;
2440                 lro_mgr->features = LRO_F_NAPI;
2441                 lro_mgr->ip_summed = CHECKSUM_COMPLETE;
2442                 lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
2443                 lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
2444                 lro_mgr->lro_arr = ss->rx_done.lro_desc;
2445                 lro_mgr->get_frag_header = myri10ge_get_frag_header;
2446                 lro_mgr->max_aggr = myri10ge_lro_max_pkts;
2447                 if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
2448                         lro_mgr->max_aggr = MAX_SKB_FRAGS;
2449
2450                 /* must happen prior to any irq */
2451                 napi_enable(&(ss)->napi);
2452         }
2453
2454         /* now give firmware buffers sizes, and MTU */
2455         cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2456         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2457         cmd.data0 = mgp->small_bytes;
2458         status |=
2459             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2460         cmd.data0 = big_pow2;
2461         status |=
2462             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2463         if (status) {
2464                 printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
2465                        dev->name);
2466                 goto abort_with_rings;
2467         }
2468
2469         /*
2470          * Set Linux style TSO mode; this is needed only on newer
2471          *  firmware versions.  Older versions default to Linux
2472          *  style TSO
2473          */
2474         cmd.data0 = 0;
2475         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2476         if (status && status != -ENOSYS) {
2477                 printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
2478                        dev->name);
2479                 goto abort_with_rings;
2480         }
2481
2482         mgp->link_state = ~0U;
2483         mgp->rdma_tags_available = 15;
2484
2485         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2486         if (status) {
2487                 printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
2488                        dev->name);
2489                 goto abort_with_rings;
2490         }
2491
2492         mgp->running = MYRI10GE_ETH_RUNNING;
2493         mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2494         add_timer(&mgp->watchdog_timer);
2495         netif_tx_wake_all_queues(dev);
2496
2497         return 0;
2498
2499 abort_with_rings:
2500         for (i = 0; i < mgp->num_slices; i++)
2501                 myri10ge_free_rings(&mgp->ss[i]);
2502
2503         myri10ge_free_irq(mgp);
2504
2505 abort_with_nothing:
2506         mgp->running = MYRI10GE_ETH_STOPPED;
2507         return -ENOMEM;
2508 }
2509
2510 static int myri10ge_close(struct net_device *dev)
2511 {
2512         struct myri10ge_priv *mgp = netdev_priv(dev);
2513         struct myri10ge_cmd cmd;
2514         int status, old_down_cnt;
2515         int i;
2516
2517         if (mgp->running != MYRI10GE_ETH_RUNNING)
2518                 return 0;
2519
2520         if (mgp->ss[0].tx.req_bytes == NULL)
2521                 return 0;
2522
2523         del_timer_sync(&mgp->watchdog_timer);
2524         mgp->running = MYRI10GE_ETH_STOPPING;
2525         for (i = 0; i < mgp->num_slices; i++) {
2526                 napi_disable(&mgp->ss[i].napi);
2527         }
2528         netif_carrier_off(dev);
2529
2530         netif_tx_stop_all_queues(dev);
2531         old_down_cnt = mgp->down_cnt;
2532         mb();
2533         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2534         if (status)
2535                 printk(KERN_ERR "myri10ge: %s: Couldn't bring down link\n",
2536                        dev->name);
2537
2538         wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt, HZ);
2539         if (old_down_cnt == mgp->down_cnt)
2540                 printk(KERN_ERR "myri10ge: %s never got down irq\n", dev->name);
2541
2542         netif_tx_disable(dev);
2543         myri10ge_free_irq(mgp);
2544         for (i = 0; i < mgp->num_slices; i++)
2545                 myri10ge_free_rings(&mgp->ss[i]);
2546
2547         mgp->running = MYRI10GE_ETH_STOPPED;
2548         return 0;
2549 }
2550
2551 /* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2552  * backwards one at a time and handle ring wraps */
2553
2554 static inline void
2555 myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2556                               struct mcp_kreq_ether_send *src, int cnt)
2557 {
2558         int idx, starting_slot;
2559         starting_slot = tx->req;
2560         while (cnt > 1) {
2561                 cnt--;
2562                 idx = (starting_slot + cnt) & tx->mask;
2563                 myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2564                 mb();
2565         }
2566 }
2567
2568 /*
2569  * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2570  * at most 32 bytes at a time, so as to avoid involving the software
2571  * pio handler in the nic.   We re-write the first segment's flags
2572  * to mark them valid only after writing the entire chain.
2573  */
2574
2575 static inline void
2576 myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2577                     int cnt)
2578 {
2579         int idx, i;
2580         struct mcp_kreq_ether_send __iomem *dstp, *dst;
2581         struct mcp_kreq_ether_send *srcp;
2582         u8 last_flags;
2583
2584         idx = tx->req & tx->mask;
2585
2586         last_flags = src->flags;
2587         src->flags = 0;
2588         mb();
2589         dst = dstp = &tx->lanai[idx];
2590         srcp = src;
2591
2592         if ((idx + cnt) < tx->mask) {
2593                 for (i = 0; i < (cnt - 1); i += 2) {
2594                         myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2595                         mb();   /* force write every 32 bytes */
2596                         srcp += 2;
2597                         dstp += 2;
2598                 }
2599         } else {
2600                 /* submit all but the first request, and ensure
2601                  * that it is submitted below */
2602                 myri10ge_submit_req_backwards(tx, src, cnt);
2603                 i = 0;
2604         }
2605         if (i < cnt) {
2606                 /* submit the first request */
2607                 myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2608                 mb();           /* barrier before setting valid flag */
2609         }
2610
2611         /* re-write the last 32-bits with the valid flags */
2612         src->flags = last_flags;
2613         put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2614         tx->req += cnt;
2615         mb();
2616 }
2617
2618 /*
2619  * Transmit a packet.  We need to split the packet so that a single
2620  * segment does not cross myri10ge->tx_boundary, so this makes segment
2621  * counting tricky.  So rather than try to count segments up front, we
2622  * just give up if there are too few segments to hold a reasonably
2623  * fragmented packet currently available.  If we run
2624  * out of segments while preparing a packet for DMA, we just linearize
2625  * it and try again.
2626  */
2627
2628 static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
2629 {
2630         struct myri10ge_priv *mgp = netdev_priv(dev);
2631         struct myri10ge_slice_state *ss;
2632         struct mcp_kreq_ether_send *req;
2633         struct myri10ge_tx_buf *tx;
2634         struct skb_frag_struct *frag;
2635         struct netdev_queue *netdev_queue;
2636         dma_addr_t bus;
2637         u32 low;
2638         __be32 high_swapped;
2639         unsigned int len;
2640         int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2641         u16 pseudo_hdr_offset, cksum_offset, queue;
2642         int cum_len, seglen, boundary, rdma_count;
2643         u8 flags, odd_flag;
2644
2645         queue = skb_get_queue_mapping(skb);
2646         ss = &mgp->ss[queue];
2647         netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2648         tx = &ss->tx;
2649
2650 again:
2651         req = tx->req_list;
2652         avail = tx->mask - 1 - (tx->req - tx->done);
2653
2654         mss = 0;
2655         max_segments = MXGEFW_MAX_SEND_DESC;
2656
2657         if (skb_is_gso(skb)) {
2658                 mss = skb_shinfo(skb)->gso_size;
2659                 max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2660         }
2661
2662         if ((unlikely(avail < max_segments))) {
2663                 /* we are out of transmit resources */
2664                 tx->stop_queue++;
2665                 netif_tx_stop_queue(netdev_queue);
2666                 return 1;
2667         }
2668
2669         /* Setup checksum offloading, if needed */
2670         cksum_offset = 0;
2671         pseudo_hdr_offset = 0;
2672         odd_flag = 0;
2673         flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2674         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2675                 cksum_offset = skb_transport_offset(skb);
2676                 pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2677                 /* If the headers are excessively large, then we must
2678                  * fall back to a software checksum */
2679                 if (unlikely(!mss && (cksum_offset > 255 ||
2680                                       pseudo_hdr_offset > 127))) {
2681                         if (skb_checksum_help(skb))
2682                                 goto drop;
2683                         cksum_offset = 0;
2684                         pseudo_hdr_offset = 0;
2685                 } else {
2686                         odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2687                         flags |= MXGEFW_FLAGS_CKSUM;
2688                 }
2689         }
2690
2691         cum_len = 0;
2692
2693         if (mss) {              /* TSO */
2694                 /* this removes any CKSUM flag from before */
2695                 flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2696
2697                 /* negative cum_len signifies to the
2698                  * send loop that we are still in the
2699                  * header portion of the TSO packet.
2700                  * TSO header can be at most 1KB long */
2701                 cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2702
2703                 /* for IPv6 TSO, the checksum offset stores the
2704                  * TCP header length, to save the firmware from
2705                  * the need to parse the headers */
2706                 if (skb_is_gso_v6(skb)) {
2707                         cksum_offset = tcp_hdrlen(skb);
2708                         /* Can only handle headers <= max_tso6 long */
2709                         if (unlikely(-cum_len > mgp->max_tso6))
2710                                 return myri10ge_sw_tso(skb, dev);
2711                 }
2712                 /* for TSO, pseudo_hdr_offset holds mss.
2713                  * The firmware figures out where to put
2714                  * the checksum by parsing the header. */
2715                 pseudo_hdr_offset = mss;
2716         } else
2717                 /* Mark small packets, and pad out tiny packets */
2718         if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2719                 flags |= MXGEFW_FLAGS_SMALL;
2720
2721                 /* pad frames to at least ETH_ZLEN bytes */
2722                 if (unlikely(skb->len < ETH_ZLEN)) {
2723                         if (skb_padto(skb, ETH_ZLEN)) {
2724                                 /* The packet is gone, so we must
2725                                  * return 0 */
2726                                 ss->stats.tx_dropped += 1;
2727                                 return 0;
2728                         }
2729                         /* adjust the len to account for the zero pad
2730                          * so that the nic can know how long it is */
2731                         skb->len = ETH_ZLEN;
2732                 }
2733         }
2734
2735         /* map the skb for DMA */
2736         len = skb->len - skb->data_len;
2737         idx = tx->req & tx->mask;
2738         tx->info[idx].skb = skb;
2739         bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2740         pci_unmap_addr_set(&tx->info[idx], bus, bus);
2741         pci_unmap_len_set(&tx->info[idx], len, len);
2742
2743         frag_cnt = skb_shinfo(skb)->nr_frags;
2744         frag_idx = 0;
2745         count = 0;
2746         rdma_count = 0;
2747
2748         /* "rdma_count" is the number of RDMAs belonging to the
2749          * current packet BEFORE the current send request. For
2750          * non-TSO packets, this is equal to "count".
2751          * For TSO packets, rdma_count needs to be reset
2752          * to 0 after a segment cut.
2753          *
2754          * The rdma_count field of the send request is
2755          * the number of RDMAs of the packet starting at
2756          * that request. For TSO send requests with one ore more cuts
2757          * in the middle, this is the number of RDMAs starting
2758          * after the last cut in the request. All previous
2759          * segments before the last cut implicitly have 1 RDMA.
2760          *
2761          * Since the number of RDMAs is not known beforehand,
2762          * it must be filled-in retroactively - after each
2763          * segmentation cut or at the end of the entire packet.
2764          */
2765
2766         while (1) {
2767                 /* Break the SKB or Fragment up into pieces which
2768                  * do not cross mgp->tx_boundary */
2769                 low = MYRI10GE_LOWPART_TO_U32(bus);
2770                 high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2771                 while (len) {
2772                         u8 flags_next;
2773                         int cum_len_next;
2774
2775                         if (unlikely(count == max_segments))
2776                                 goto abort_linearize;
2777
2778                         boundary =
2779                             (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2780                         seglen = boundary - low;
2781                         if (seglen > len)
2782                                 seglen = len;
2783                         flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2784                         cum_len_next = cum_len + seglen;
2785                         if (mss) {      /* TSO */
2786                                 (req - rdma_count)->rdma_count = rdma_count + 1;
2787
2788                                 if (likely(cum_len >= 0)) {     /* payload */
2789                                         int next_is_first, chop;
2790
2791                                         chop = (cum_len_next > mss);
2792                                         cum_len_next = cum_len_next % mss;
2793                                         next_is_first = (cum_len_next == 0);
2794                                         flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2795                                         flags_next |= next_is_first *
2796                                             MXGEFW_FLAGS_FIRST;
2797                                         rdma_count |= -(chop | next_is_first);
2798                                         rdma_count += chop & !next_is_first;
2799                                 } else if (likely(cum_len_next >= 0)) { /* header ends */
2800                                         int small;
2801
2802                                         rdma_count = -1;
2803                                         cum_len_next = 0;
2804                                         seglen = -cum_len;
2805                                         small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2806                                         flags_next = MXGEFW_FLAGS_TSO_PLD |
2807                                             MXGEFW_FLAGS_FIRST |
2808                                             (small * MXGEFW_FLAGS_SMALL);
2809                                 }
2810                         }
2811                         req->addr_high = high_swapped;
2812                         req->addr_low = htonl(low);
2813                         req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2814                         req->pad = 0;   /* complete solid 16-byte block; does this matter? */
2815                         req->rdma_count = 1;
2816                         req->length = htons(seglen);
2817                         req->cksum_offset = cksum_offset;
2818                         req->flags = flags | ((cum_len & 1) * odd_flag);
2819
2820                         low += seglen;
2821                         len -= seglen;
2822                         cum_len = cum_len_next;
2823                         flags = flags_next;
2824                         req++;
2825                         count++;
2826                         rdma_count++;
2827                         if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2828                                 if (unlikely(cksum_offset > seglen))
2829                                         cksum_offset -= seglen;
2830                                 else
2831                                         cksum_offset = 0;
2832                         }
2833                 }
2834                 if (frag_idx == frag_cnt)
2835                         break;
2836
2837                 /* map next fragment for DMA */
2838                 idx = (count + tx->req) & tx->mask;
2839                 frag = &skb_shinfo(skb)->frags[frag_idx];
2840                 frag_idx++;
2841                 len = frag->size;
2842                 bus = pci_map_page(mgp->pdev, frag->page, frag->page_offset,
2843                                    len, PCI_DMA_TODEVICE);
2844                 pci_unmap_addr_set(&tx->info[idx], bus, bus);
2845                 pci_unmap_len_set(&tx->info[idx], len, len);
2846         }
2847
2848         (req - rdma_count)->rdma_count = rdma_count;
2849         if (mss)
2850                 do {
2851                         req--;
2852                         req->flags |= MXGEFW_FLAGS_TSO_LAST;
2853                 } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
2854                                          MXGEFW_FLAGS_FIRST)));
2855         idx = ((count - 1) + tx->req) & tx->mask;
2856         tx->info[idx].last = 1;
2857         myri10ge_submit_req(tx, tx->req_list, count);
2858         /* if using multiple tx queues, make sure NIC polls the
2859          * current slice */
2860         if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
2861                 tx->queue_active = 1;
2862                 put_be32(htonl(1), tx->send_go);
2863         }
2864         tx->pkt_start++;
2865         if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
2866                 tx->stop_queue++;
2867                 netif_tx_stop_queue(netdev_queue);
2868         }
2869         dev->trans_start = jiffies;
2870         return 0;
2871
2872 abort_linearize:
2873         /* Free any DMA resources we've alloced and clear out the skb
2874          * slot so as to not trip up assertions, and to avoid a
2875          * double-free if linearizing fails */
2876
2877         last_idx = (idx + 1) & tx->mask;
2878         idx = tx->req & tx->mask;
2879         tx->info[idx].skb = NULL;
2880         do {
2881                 len = pci_unmap_len(&tx->info[idx], len);
2882                 if (len) {
2883                         if (tx->info[idx].skb != NULL)
2884                                 pci_unmap_single(mgp->pdev,
2885                                                  pci_unmap_addr(&tx->info[idx],
2886                                                                 bus), len,
2887                                                  PCI_DMA_TODEVICE);
2888                         else
2889                                 pci_unmap_page(mgp->pdev,
2890                                                pci_unmap_addr(&tx->info[idx],
2891                                                               bus), len,
2892                                                PCI_DMA_TODEVICE);
2893                         pci_unmap_len_set(&tx->info[idx], len, 0);
2894                         tx->info[idx].skb = NULL;
2895                 }
2896                 idx = (idx + 1) & tx->mask;
2897         } while (idx != last_idx);
2898         if (skb_is_gso(skb)) {
2899                 printk(KERN_ERR
2900                        "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
2901                        mgp->dev->name);
2902                 goto drop;
2903         }
2904
2905         if (skb_linearize(skb))
2906                 goto drop;
2907
2908         tx->linearized++;
2909         goto again;
2910
2911 drop:
2912         dev_kfree_skb_any(skb);
2913         ss->stats.tx_dropped += 1;
2914         return 0;
2915
2916 }
2917
2918 static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
2919 {
2920         struct sk_buff *segs, *curr;
2921         struct myri10ge_priv *mgp = netdev_priv(dev);
2922         int status;
2923
2924         segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
2925         if (IS_ERR(segs))
2926                 goto drop;
2927
2928         while (segs) {
2929                 curr = segs;
2930                 segs = segs->next;
2931                 curr->next = NULL;
2932                 status = myri10ge_xmit(curr, dev);
2933                 if (status != 0) {
2934                         dev_kfree_skb_any(curr);
2935                         if (segs != NULL) {
2936                                 curr = segs;
2937                                 segs = segs->next;
2938                                 curr->next = NULL;
2939                                 dev_kfree_skb_any(segs);
2940                         }
2941                         goto drop;
2942                 }
2943         }
2944         dev_kfree_skb_any(skb);
2945         return 0;
2946
2947 drop:
2948         dev_kfree_skb_any(skb);
2949         mgp->stats.tx_dropped += 1;
2950         return 0;
2951 }
2952
2953 static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
2954 {
2955         struct myri10ge_priv *mgp = netdev_priv(dev);
2956         struct myri10ge_slice_netstats *slice_stats;
2957         struct net_device_stats *stats = &mgp->stats;
2958         int i;
2959
2960         memset(stats, 0, sizeof(*stats));
2961         for (i = 0; i < mgp->num_slices; i++) {
2962                 slice_stats = &mgp->ss[i].stats;
2963                 stats->rx_packets += slice_stats->rx_packets;
2964                 stats->tx_packets += slice_stats->tx_packets;
2965                 stats->rx_bytes += slice_stats->rx_bytes;
2966                 stats->tx_bytes += slice_stats->tx_bytes;
2967                 stats->rx_dropped += slice_stats->rx_dropped;
2968                 stats->tx_dropped += slice_stats->tx_dropped;
2969         }
2970         return stats;
2971 }
2972
2973 static void myri10ge_set_multicast_list(struct net_device *dev)
2974 {
2975         struct myri10ge_priv *mgp = netdev_priv(dev);
2976         struct myri10ge_cmd cmd;
2977         struct dev_mc_list *mc_list;
2978         __be32 data[2] = { 0, 0 };
2979         int err;
2980         DECLARE_MAC_BUF(mac);
2981
2982         /* can be called from atomic contexts,
2983          * pass 1 to force atomicity in myri10ge_send_cmd() */
2984         myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
2985
2986         /* This firmware is known to not support multicast */
2987         if (!mgp->fw_multicast_support)
2988                 return;
2989
2990         /* Disable multicast filtering */
2991
2992         err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
2993         if (err != 0) {
2994                 printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
2995                        " error status: %d\n", dev->name, err);
2996                 goto abort;
2997         }
2998
2999         if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
3000                 /* request to disable multicast filtering, so quit here */
3001                 return;
3002         }
3003
3004         /* Flush the filters */
3005
3006         err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
3007                                 &cmd, 1);
3008         if (err != 0) {
3009                 printk(KERN_ERR
3010                        "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
3011                        ", error status: %d\n", dev->name, err);
3012                 goto abort;
3013         }
3014
3015         /* Walk the multicast list, and add each address */
3016         for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
3017                 memcpy(data, &mc_list->dmi_addr, 6);
3018                 cmd.data0 = ntohl(data[0]);
3019                 cmd.data1 = ntohl(data[1]);
3020                 err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
3021                                         &cmd, 1);
3022
3023                 if (err != 0) {
3024                         printk(KERN_ERR "myri10ge: %s: Failed "
3025                                "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
3026                                "%d\t", dev->name, err);
3027                         printk(KERN_ERR "MAC %s\n",
3028                                print_mac(mac, mc_list->dmi_addr));
3029                         goto abort;
3030                 }
3031         }
3032         /* Enable multicast filtering */
3033         err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3034         if (err != 0) {
3035                 printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
3036                        "error status: %d\n", dev->name, err);
3037                 goto abort;
3038         }
3039
3040         return;
3041
3042 abort:
3043         return;
3044 }
3045
3046 static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3047 {
3048         struct sockaddr *sa = addr;
3049         struct myri10ge_priv *mgp = netdev_priv(dev);
3050         int status;
3051
3052         if (!is_valid_ether_addr(sa->sa_data))
3053                 return -EADDRNOTAVAIL;
3054
3055         status = myri10ge_update_mac_address(mgp, sa->sa_data);
3056         if (status != 0) {
3057                 printk(KERN_ERR
3058                        "myri10ge: %s: changing mac address failed with %d\n",
3059                        dev->name, status);
3060                 return status;
3061         }
3062
3063         /* change the dev structure */
3064         memcpy(dev->dev_addr, sa->sa_data, 6);
3065         return 0;
3066 }
3067
3068 static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3069 {
3070         struct myri10ge_priv *mgp = netdev_priv(dev);
3071         int error = 0;
3072
3073         if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
3074                 printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
3075                        dev->name, new_mtu);
3076                 return -EINVAL;
3077         }
3078         printk(KERN_INFO "%s: changing mtu from %d to %d\n",
3079                dev->name, dev->mtu, new_mtu);
3080         if (mgp->running) {
3081                 /* if we change the mtu on an active device, we must
3082                  * reset the device so the firmware sees the change */
3083                 myri10ge_close(dev);
3084                 dev->mtu = new_mtu;
3085                 myri10ge_open(dev);
3086         } else
3087                 dev->mtu = new_mtu;
3088
3089         return error;
3090 }
3091
3092 /*
3093  * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3094  * Only do it if the bridge is a root port since we don't want to disturb
3095  * any other device, except if forced with myri10ge_ecrc_enable > 1.
3096  */
3097
3098 static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3099 {
3100         struct pci_dev *bridge = mgp->pdev->bus->self;
3101         struct device *dev = &mgp->pdev->dev;
3102         unsigned cap;
3103         unsigned err_cap;
3104         u16 val;
3105         u8 ext_type;
3106         int ret;
3107
3108         if (!myri10ge_ecrc_enable || !bridge)
3109                 return;
3110
3111         /* check that the bridge is a root port */
3112         cap = pci_find_capability(bridge, PCI_CAP_ID_EXP);
3113         pci_read_config_word(bridge, cap + PCI_CAP_FLAGS, &val);
3114         ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
3115         if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
3116                 if (myri10ge_ecrc_enable > 1) {
3117                         struct pci_dev *prev_bridge, *old_bridge = bridge;
3118
3119                         /* Walk the hierarchy up to the root port
3120                          * where ECRC has to be enabled */
3121                         do {
3122                                 prev_bridge = bridge;
3123                                 bridge = bridge->bus->self;
3124                                 if (!bridge || prev_bridge == bridge) {
3125                                         dev_err(dev,
3126                                                 "Failed to find root port"
3127                                                 " to force ECRC\n");
3128                                         return;
3129                                 }
3130                                 cap =
3131                                     pci_find_capability(bridge, PCI_CAP_ID_EXP);
3132                                 pci_read_config_word(bridge,
3133                                                      cap + PCI_CAP_FLAGS, &val);
3134                                 ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
3135                         } while (ext_type != PCI_EXP_TYPE_ROOT_PORT);
3136
3137                         dev_info(dev,
3138                                  "Forcing ECRC on non-root port %s"
3139                                  " (enabling on root port %s)\n",
3140                                  pci_name(old_bridge), pci_name(bridge));
3141                 } else {
3142                         dev_err(dev,
3143                                 "Not enabling ECRC on non-root port %s\n",
3144                                 pci_name(bridge));
3145                         return;
3146                 }
3147         }
3148
3149         cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3150         if (!cap)
3151                 return;
3152
3153         ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3154         if (ret) {
3155                 dev_err(dev, "failed reading ext-conf-space of %s\n",
3156                         pci_name(bridge));
3157                 dev_err(dev, "\t pci=nommconf in use? "
3158                         "or buggy/incomplete/absent ACPI MCFG attr?\n");
3159                 return;
3160         }
3161         if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3162                 return;
3163
3164         err_cap |= PCI_ERR_CAP_ECRC_GENE;
3165         pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3166         dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3167 }
3168
3169 /*
3170  * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3171  * when the PCI-E Completion packets are aligned on an 8-byte
3172  * boundary.  Some PCI-E chip sets always align Completion packets; on
3173  * the ones that do not, the alignment can be enforced by enabling
3174  * ECRC generation (if supported).
3175  *
3176  * When PCI-E Completion packets are not aligned, it is actually more
3177  * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3178  *
3179  * If the driver can neither enable ECRC nor verify that it has
3180  * already been enabled, then it must use a firmware image which works
3181  * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3182  * should also ensure that it never gives the device a Read-DMA which is
3183  * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3184  * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3185  * firmware image, and set tx_boundary to 4KB.
3186  */
3187
3188 static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3189 {
3190         struct pci_dev *pdev = mgp->pdev;
3191         struct device *dev = &pdev->dev;
3192         int status;
3193
3194         mgp->tx_boundary = 4096;
3195         /*
3196          * Verify the max read request size was set to 4KB
3197          * before trying the test with 4KB.
3198          */
3199         status = pcie_get_readrq(pdev);
3200         if (status < 0) {
3201                 dev_err(dev, "Couldn't read max read req size: %d\n", status);
3202                 goto abort;
3203         }
3204         if (status != 4096) {
3205                 dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3206                 mgp->tx_boundary = 2048;
3207         }
3208         /*
3209          * load the optimized firmware (which assumes aligned PCIe
3210          * completions) in order to see if it works on this host.
3211          */
3212         mgp->fw_name = myri10ge_fw_aligned;
3213         status = myri10ge_load_firmware(mgp, 1);
3214         if (status != 0) {
3215                 goto abort;
3216         }
3217
3218         /*
3219          * Enable ECRC if possible
3220          */
3221         myri10ge_enable_ecrc(mgp);
3222
3223         /*
3224          * Run a DMA test which watches for unaligned completions and
3225          * aborts on the first one seen.
3226          */
3227
3228         status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3229         if (status == 0)
3230                 return;         /* keep the aligned firmware */
3231
3232         if (status != -E2BIG)
3233                 dev_warn(dev, "DMA test failed: %d\n", status);
3234         if (status == -ENOSYS)
3235                 dev_warn(dev, "Falling back to ethp! "
3236                          "Please install up to date fw\n");
3237 abort:
3238         /* fall back to using the unaligned firmware */
3239         mgp->tx_boundary = 2048;
3240         mgp->fw_name = myri10ge_fw_unaligned;
3241
3242 }
3243
3244 static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3245 {
3246         if (myri10ge_force_firmware == 0) {
3247                 int link_width, exp_cap;
3248                 u16 lnk;
3249
3250                 exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP);
3251                 pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
3252                 link_width = (lnk >> 4) & 0x3f;
3253
3254                 /* Check to see if Link is less than 8 or if the
3255                  * upstream bridge is known to provide aligned
3256                  * completions */
3257                 if (link_width < 8) {
3258                         dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3259                                  link_width);
3260                         mgp->tx_boundary = 4096;
3261                         mgp->fw_name = myri10ge_fw_aligned;
3262                 } else {
3263                         myri10ge_firmware_probe(mgp);
3264                 }
3265         } else {
3266                 if (myri10ge_force_firmware == 1) {
3267                         dev_info(&mgp->pdev->dev,
3268                                  "Assuming aligned completions (forced)\n");
3269                         mgp->tx_boundary = 4096;
3270                         mgp->fw_name = myri10ge_fw_aligned;
3271                 } else {
3272                         dev_info(&mgp->pdev->dev,
3273                                  "Assuming unaligned completions (forced)\n");
3274                         mgp->tx_boundary = 2048;
3275                         mgp->fw_name = myri10ge_fw_unaligned;
3276                 }
3277         }
3278         if (myri10ge_fw_name != NULL) {
3279                 dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3280                          myri10ge_fw_name);
3281                 mgp->fw_name = myri10ge_fw_name;
3282         }
3283 }
3284
3285 #ifdef CONFIG_PM
3286 static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3287 {
3288         struct myri10ge_priv *mgp;
3289         struct net_device *netdev;
3290
3291         mgp = pci_get_drvdata(pdev);
3292         if (mgp == NULL)
3293                 return -EINVAL;
3294         netdev = mgp->dev;
3295
3296         netif_device_detach(netdev);
3297         if (netif_running(netdev)) {
3298                 printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
3299                 rtnl_lock();
3300                 myri10ge_close(netdev);
3301                 rtnl_unlock();
3302         }
3303         myri10ge_dummy_rdma(mgp, 0);
3304         pci_save_state(pdev);
3305         pci_disable_device(pdev);
3306
3307         return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3308 }
3309
3310 static int myri10ge_resume(struct pci_dev *pdev)
3311 {
3312         struct myri10ge_priv *mgp;
3313         struct net_device *netdev;
3314         int status;
3315         u16 vendor;
3316
3317         mgp = pci_get_drvdata(pdev);
3318         if (mgp == NULL)
3319                 return -EINVAL;
3320         netdev = mgp->dev;
3321         pci_set_power_state(pdev, 0);   /* zeros conf space as a side effect */
3322         msleep(5);              /* give card time to respond */
3323         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3324         if (vendor == 0xffff) {
3325                 printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
3326                        mgp->dev->name);
3327                 return -EIO;
3328         }
3329
3330         status = pci_restore_state(pdev);
3331         if (status)
3332                 return status;
3333
3334         status = pci_enable_device(pdev);
3335         if (status) {
3336                 dev_err(&pdev->dev, "failed to enable device\n");
3337                 return status;
3338         }
3339
3340         pci_set_master(pdev);
3341
3342         myri10ge_reset(mgp);
3343         myri10ge_dummy_rdma(mgp, 1);
3344
3345         /* Save configuration space to be restored if the
3346          * nic resets due to a parity error */
3347         pci_save_state(pdev);
3348
3349         if (netif_running(netdev)) {
3350                 rtnl_lock();
3351                 status = myri10ge_open(netdev);
3352                 rtnl_unlock();
3353                 if (status != 0)
3354                         goto abort_with_enabled;
3355
3356         }
3357         netif_device_attach(netdev);
3358
3359         return 0;
3360
3361 abort_with_enabled:
3362         pci_disable_device(pdev);
3363         return -EIO;
3364
3365 }
3366 #endif                          /* CONFIG_PM */
3367
3368 static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3369 {
3370         struct pci_dev *pdev = mgp->pdev;
3371         int vs = mgp->vendor_specific_offset;
3372         u32 reboot;
3373
3374         /*enter read32 mode */
3375         pci_write_config_byte(pdev, vs + 0x10, 0x3);
3376
3377         /*read REBOOT_STATUS (0xfffffff0) */
3378         pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3379         pci_read_config_dword(pdev, vs + 0x14, &reboot);
3380         return reboot;
3381 }
3382
3383 /*
3384  * This watchdog is used to check whether the board has suffered
3385  * from a parity error and needs to be recovered.
3386  */
3387 static void myri10ge_watchdog(struct work_struct *work)
3388 {
3389         struct myri10ge_priv *mgp =
3390             container_of(work, struct myri10ge_priv, watchdog_work);
3391         struct myri10ge_tx_buf *tx;
3392         u32 reboot;
3393         int status;
3394         int i;
3395         u16 cmd, vendor;
3396
3397         mgp->watchdog_resets++;
3398         pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3399         if ((cmd & PCI_COMMAND_MASTER) == 0) {
3400                 /* Bus master DMA disabled?  Check to see
3401                  * if the card rebooted due to a parity error
3402                  * For now, just report it */
3403                 reboot = myri10ge_read_reboot(mgp);
3404                 printk(KERN_ERR
3405                        "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
3406                        mgp->dev->name, reboot,
3407                        myri10ge_reset_recover ? " " : " not");
3408                 if (myri10ge_reset_recover == 0)
3409                         return;
3410
3411                 myri10ge_reset_recover--;
3412
3413                 /*
3414                  * A rebooted nic will come back with config space as
3415                  * it was after power was applied to PCIe bus.
3416                  * Attempt to restore config space which was saved
3417                  * when the driver was loaded, or the last time the
3418                  * nic was resumed from power saving mode.
3419                  */
3420                 pci_restore_state(mgp->pdev);
3421
3422                 /* save state again for accounting reasons */
3423                 pci_save_state(mgp->pdev);
3424
3425         } else {
3426                 /* if we get back -1's from our slot, perhaps somebody
3427                  * powered off our card.  Don't try to reset it in
3428                  * this case */
3429                 if (cmd == 0xffff) {
3430                         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3431                         if (vendor == 0xffff) {
3432                                 printk(KERN_ERR
3433                                        "myri10ge: %s: device disappeared!\n",
3434                                        mgp->dev->name);
3435                                 return;
3436                         }
3437                 }
3438                 /* Perhaps it is a software error.  Try to reset */
3439
3440                 printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
3441                        mgp->dev->name);
3442                 for (i = 0; i < mgp->num_slices; i++) {
3443                         tx = &mgp->ss[i].tx;
3444                         printk(KERN_INFO
3445                                "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
3446                                mgp->dev->name, i, tx->queue_active, tx->req,
3447                                tx->done, tx->pkt_start, tx->pkt_done,
3448                                (int)ntohl(mgp->ss[i].fw_stats->
3449                                           send_done_count));
3450                         msleep(2000);
3451                         printk(KERN_INFO
3452                                "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
3453                                mgp->dev->name, i, tx->queue_active, tx->req,
3454                                tx->done, tx->pkt_start, tx->pkt_done,
3455                                (int)ntohl(mgp->ss[i].fw_stats->
3456                                           send_done_count));
3457                 }
3458         }
3459
3460         rtnl_lock();
3461         myri10ge_close(mgp->dev);
3462         status = myri10ge_load_firmware(mgp, 1);
3463         if (status != 0)
3464                 printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
3465                        mgp->dev->name);
3466         else
3467                 myri10ge_open(mgp->dev);
3468         rtnl_unlock();
3469 }
3470
3471 /*
3472  * We use our own timer routine rather than relying upon
3473  * netdev->tx_timeout because we have a very large hardware transmit
3474  * queue.  Due to the large queue, the netdev->tx_timeout function
3475  * cannot detect a NIC with a parity error in a timely fashion if the
3476  * NIC is lightly loaded.
3477  */
3478 static void myri10ge_watchdog_timer(unsigned long arg)
3479 {
3480         struct myri10ge_priv *mgp;
3481         struct myri10ge_slice_state *ss;
3482         int i, reset_needed;
3483         u32 rx_pause_cnt;
3484
3485         mgp = (struct myri10ge_priv *)arg;
3486
3487         rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3488         for (i = 0, reset_needed = 0;
3489              i < mgp->num_slices && reset_needed == 0; ++i) {
3490
3491                 ss = &mgp->ss[i];
3492                 if (ss->rx_small.watchdog_needed) {
3493                         myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3494                                                 mgp->small_bytes + MXGEFW_PAD,
3495                                                 1);
3496                         if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3497                             myri10ge_fill_thresh)
3498                                 ss->rx_small.watchdog_needed = 0;
3499                 }
3500                 if (ss->rx_big.watchdog_needed) {
3501                         myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3502                                                 mgp->big_bytes, 1);
3503                         if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3504                             myri10ge_fill_thresh)
3505                                 ss->rx_big.watchdog_needed = 0;
3506                 }
3507
3508                 if (ss->tx.req != ss->tx.done &&
3509                     ss->tx.done == ss->watchdog_tx_done &&
3510                     ss->watchdog_tx_req != ss->watchdog_tx_done) {
3511                         /* nic seems like it might be stuck.. */
3512                         if (rx_pause_cnt != mgp->watchdog_pause) {
3513                                 if (net_ratelimit())
3514                                         printk(KERN_WARNING
3515                                                "myri10ge %s slice %d:"
3516                                                "TX paused, check link partner\n",
3517                                                mgp->dev->name, i);
3518                         } else {
3519                                 printk(KERN_WARNING
3520                                        "myri10ge %s slice %d stuck:",
3521                                        mgp->dev->name, i);
3522                                 reset_needed = 1;
3523                         }
3524                 }
3525                 ss->watchdog_tx_done = ss->tx.done;
3526                 ss->watchdog_tx_req = ss->tx.req;
3527         }
3528         mgp->watchdog_pause = rx_pause_cnt;
3529
3530         if (reset_needed) {
3531                 schedule_work(&mgp->watchdog_work);
3532         } else {
3533                 /* rearm timer */
3534                 mod_timer(&mgp->watchdog_timer,
3535                           jiffies + myri10ge_watchdog_timeout * HZ);
3536         }
3537 }
3538
3539 static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3540 {
3541         struct myri10ge_slice_state *ss;
3542         struct pci_dev *pdev = mgp->pdev;
3543         size_t bytes;
3544         int i;
3545
3546         if (mgp->ss == NULL)
3547                 return;
3548
3549         for (i = 0; i < mgp->num_slices; i++) {
3550                 ss = &mgp->ss[i];
3551                 if (ss->rx_done.entry != NULL) {
3552                         bytes = mgp->max_intr_slots *
3553                             sizeof(*ss->rx_done.entry);
3554                         dma_free_coherent(&pdev->dev, bytes,
3555                                           ss->rx_done.entry, ss->rx_done.bus);
3556                         ss->rx_done.entry = NULL;
3557                 }
3558                 if (ss->fw_stats != NULL) {
3559                         bytes = sizeof(*ss->fw_stats);
3560                         dma_free_coherent(&pdev->dev, bytes,
3561                                           ss->fw_stats, ss->fw_stats_bus);
3562                         ss->fw_stats = NULL;
3563                 }
3564         }
3565         kfree(mgp->ss);
3566         mgp->ss = NULL;
3567 }
3568
3569 static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3570 {
3571         struct myri10ge_slice_state *ss;
3572         struct pci_dev *pdev = mgp->pdev;
3573         size_t bytes;
3574         int i;
3575
3576         bytes = sizeof(*mgp->ss) * mgp->num_slices;
3577         mgp->ss = kzalloc(bytes, GFP_KERNEL);
3578         if (mgp->ss == NULL) {
3579                 return -ENOMEM;
3580         }
3581
3582         for (i = 0; i < mgp->num_slices; i++) {
3583                 ss = &mgp->ss[i];
3584                 bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3585                 ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
3586                                                        &ss->rx_done.bus,
3587                                                        GFP_KERNEL);
3588                 if (ss->rx_done.entry == NULL)
3589                         goto abort;
3590                 memset(ss->rx_done.entry, 0, bytes);
3591                 bytes = sizeof(*ss->fw_stats);
3592                 ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3593                                                   &ss->fw_stats_bus,
3594                                                   GFP_KERNEL);
3595                 if (ss->fw_stats == NULL)
3596                         goto abort;
3597                 ss->mgp = mgp;
3598                 ss->dev = mgp->dev;
3599                 netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3600                                myri10ge_napi_weight);
3601         }
3602         return 0;
3603 abort:
3604         myri10ge_free_slices(mgp);
3605         return -ENOMEM;
3606 }
3607
3608 /*
3609  * This function determines the number of slices supported.
3610  * The number slices is the minumum of the number of CPUS,
3611  * the number of MSI-X irqs supported, the number of slices
3612  * supported by the firmware
3613  */
3614 static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3615 {
3616         struct myri10ge_cmd cmd;
3617         struct pci_dev *pdev = mgp->pdev;
3618         char *old_fw;
3619         int i, status, ncpus, msix_cap;
3620
3621         mgp->num_slices = 1;
3622         msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
3623         ncpus = num_online_cpus();
3624
3625         if (myri10ge_max_slices == 1 || msix_cap == 0 ||
3626             (myri10ge_max_slices == -1 && ncpus < 2))
3627                 return;
3628
3629         /* try to load the slice aware rss firmware */
3630         old_fw = mgp->fw_name;
3631         if (myri10ge_fw_name != NULL) {
3632                 dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3633                          myri10ge_fw_name);
3634                 mgp->fw_name = myri10ge_fw_name;
3635         } else if (old_fw == myri10ge_fw_aligned)
3636                 mgp->fw_name = myri10ge_fw_rss_aligned;
3637         else
3638                 mgp->fw_name = myri10ge_fw_rss_unaligned;
3639         status = myri10ge_load_firmware(mgp, 0);
3640         if (status != 0) {
3641                 dev_info(&pdev->dev, "Rss firmware not found\n");
3642                 return;
3643         }
3644
3645         /* hit the board with a reset to ensure it is alive */
3646         memset(&cmd, 0, sizeof(cmd));
3647         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3648         if (status != 0) {
3649                 dev_err(&mgp->pdev->dev, "failed reset\n");
3650                 goto abort_with_fw;
3651                 return;
3652         }
3653
3654         mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3655
3656         /* tell it the size of the interrupt queues */
3657         cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3658         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3659         if (status != 0) {
3660                 dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3661                 goto abort_with_fw;
3662         }
3663
3664         /* ask the maximum number of slices it supports */
3665         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3666         if (status != 0)
3667                 goto abort_with_fw;
3668         else
3669                 mgp->num_slices = cmd.data0;
3670
3671         /* Only allow multiple slices if MSI-X is usable */
3672         if (!myri10ge_msi) {
3673                 goto abort_with_fw;
3674         }
3675
3676         /* if the admin did not specify a limit to how many
3677          * slices we should use, cap it automatically to the
3678          * number of CPUs currently online */
3679         if (myri10ge_max_slices == -1)
3680                 myri10ge_max_slices = ncpus;
3681
3682         if (mgp->num_slices > myri10ge_max_slices)
3683                 mgp->num_slices = myri10ge_max_slices;
3684
3685         /* Now try to allocate as many MSI-X vectors as we have
3686          * slices. We give up on MSI-X if we can only get a single
3687          * vector. */
3688
3689         mgp->msix_vectors = kzalloc(mgp->num_slices *
3690                                     sizeof(*mgp->msix_vectors), GFP_KERNEL);
3691         if (mgp->msix_vectors == NULL)
3692                 goto disable_msix;
3693         for (i = 0; i < mgp->num_slices; i++) {
3694                 mgp->msix_vectors[i].entry = i;
3695         }
3696
3697         while (mgp->num_slices > 1) {
3698                 /* make sure it is a power of two */
3699                 while (!is_power_of_2(mgp->num_slices))
3700                         mgp->num_slices--;
3701                 if (mgp->num_slices == 1)
3702                         goto disable_msix;
3703                 status = pci_enable_msix(pdev, mgp->msix_vectors,
3704                                          mgp->num_slices);
3705                 if (status == 0) {
3706                         pci_disable_msix(pdev);
3707                         return;
3708                 }
3709                 if (status > 0)
3710                         mgp->num_slices = status;
3711                 else
3712                         goto disable_msix;
3713         }
3714
3715 disable_msix:
3716         if (mgp->msix_vectors != NULL) {
3717                 kfree(mgp->msix_vectors);
3718                 mgp->msix_vectors = NULL;
3719         }
3720
3721 abort_with_fw:
3722         mgp->num_slices = 1;
3723         mgp->fw_name = old_fw;
3724         myri10ge_load_firmware(mgp, 0);
3725 }
3726
3727 static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3728 {
3729         struct net_device *netdev;
3730         struct myri10ge_priv *mgp;
3731         struct device *dev = &pdev->dev;
3732         int i;
3733         int status = -ENXIO;
3734         int dac_enabled;
3735
3736         netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3737         if (netdev == NULL) {
3738                 dev_err(dev, "Could not allocate ethernet device\n");
3739                 return -ENOMEM;
3740         }
3741
3742         SET_NETDEV_DEV(netdev, &pdev->dev);
3743
3744         mgp = netdev_priv(netdev);
3745         mgp->dev = netdev;
3746         mgp->pdev = pdev;
3747         mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
3748         mgp->pause = myri10ge_flow_control;
3749         mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3750         mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3751         init_waitqueue_head(&mgp->down_wq);
3752
3753         if (pci_enable_device(pdev)) {
3754                 dev_err(&pdev->dev, "pci_enable_device call failed\n");
3755                 status = -ENODEV;
3756                 goto abort_with_netdev;
3757         }
3758
3759         /* Find the vendor-specific cap so we can check
3760          * the reboot register later on */
3761         mgp->vendor_specific_offset
3762             = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3763
3764         /* Set our max read request to 4KB */
3765         status = pcie_set_readrq(pdev, 4096);
3766         if (status != 0) {
3767                 dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3768                         status);
3769                 goto abort_with_netdev;
3770         }
3771
3772         pci_set_master(pdev);
3773         dac_enabled = 1;
3774         status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
3775         if (status != 0) {
3776                 dac_enabled = 0;
3777                 dev_err(&pdev->dev,
3778                         "64-bit pci address mask was refused, "
3779                         "trying 32-bit\n");
3780                 status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
3781         }
3782         if (status != 0) {
3783                 dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
3784                 goto abort_with_netdev;
3785         }
3786         (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
3787         mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
3788                                       &mgp->cmd_bus, GFP_KERNEL);
3789         if (mgp->cmd == NULL)
3790                 goto abort_with_netdev;
3791
3792         mgp->board_span = pci_resource_len(pdev, 0);
3793         mgp->iomem_base = pci_resource_start(pdev, 0);
3794         mgp->mtrr = -1;
3795         mgp->wc_enabled = 0;
3796 #ifdef CONFIG_MTRR
3797         mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
3798                              MTRR_TYPE_WRCOMB, 1);
3799         if (mgp->mtrr >= 0)
3800                 mgp->wc_enabled = 1;
3801 #endif
3802         /* Hack.  need to get rid of these magic numbers */
3803         mgp->sram_size =
3804             2 * 1024 * 1024 - (2 * (48 * 1024) + (32 * 1024)) - 0x100;
3805         if (mgp->sram_size > mgp->board_span) {
3806                 dev_err(&pdev->dev, "board span %ld bytes too small\n",
3807                         mgp->board_span);
3808                 goto abort_with_mtrr;
3809         }
3810         mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
3811         if (mgp->sram == NULL) {
3812                 dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
3813                         mgp->board_span, mgp->iomem_base);
3814                 status = -ENXIO;
3815                 goto abort_with_mtrr;
3816         }
3817         memcpy_fromio(mgp->eeprom_strings,
3818                       mgp->sram + mgp->sram_size - MYRI10GE_EEPROM_STRINGS_SIZE,
3819                       MYRI10GE_EEPROM_STRINGS_SIZE);
3820         memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
3821         status = myri10ge_read_mac_addr(mgp);
3822         if (status)
3823                 goto abort_with_ioremap;
3824
3825         for (i = 0; i < ETH_ALEN; i++)
3826                 netdev->dev_addr[i] = mgp->mac_addr[i];
3827
3828         myri10ge_select_firmware(mgp);
3829
3830         status = myri10ge_load_firmware(mgp, 1);
3831         if (status != 0) {
3832                 dev_err(&pdev->dev, "failed to load firmware\n");
3833                 goto abort_with_ioremap;
3834         }
3835         myri10ge_probe_slices(mgp);
3836         status = myri10ge_alloc_slices(mgp);
3837         if (status != 0) {
3838                 dev_err(&pdev->dev, "failed to alloc slice state\n");
3839                 goto abort_with_firmware;
3840         }
3841         netdev->real_num_tx_queues = mgp->num_slices;
3842         status = myri10ge_reset(mgp);
3843         if (status != 0) {
3844                 dev_err(&pdev->dev, "failed reset\n");
3845                 goto abort_with_slices;
3846         }
3847 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
3848         myri10ge_setup_dca(mgp);
3849 #endif
3850         pci_set_drvdata(pdev, mgp);
3851         if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
3852                 myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
3853         if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
3854                 myri10ge_initial_mtu = 68;
3855         netdev->mtu = myri10ge_initial_mtu;
3856         netdev->open = myri10ge_open;
3857         netdev->stop = myri10ge_close;
3858         netdev->hard_start_xmit = myri10ge_xmit;
3859         netdev->get_stats = myri10ge_get_stats;
3860         netdev->base_addr = mgp->iomem_base;
3861         netdev->change_mtu = myri10ge_change_mtu;
3862         netdev->set_multicast_list = myri10ge_set_multicast_list;
3863         netdev->set_mac_address = myri10ge_set_mac_address;
3864         netdev->features = mgp->features;
3865
3866         if (dac_enabled)
3867                 netdev->features |= NETIF_F_HIGHDMA;
3868
3869         /* make sure we can get an irq, and that MSI can be
3870          * setup (if available).  Also ensure netdev->irq
3871          * is set to correct value if MSI is enabled */
3872         status = myri10ge_request_irq(mgp);
3873         if (status != 0)
3874                 goto abort_with_firmware;
3875         netdev->irq = pdev->irq;
3876         myri10ge_free_irq(mgp);
3877
3878         /* Save configuration space to be restored if the
3879          * nic resets due to a parity error */
3880         pci_save_state(pdev);
3881
3882         /* Setup the watchdog timer */
3883         setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
3884                     (unsigned long)mgp);
3885
3886         SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
3887         INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
3888         status = register_netdev(netdev);
3889         if (status != 0) {
3890                 dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
3891                 goto abort_with_state;
3892         }
3893         if (mgp->msix_enabled)
3894                 dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
3895                          mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
3896                          (mgp->wc_enabled ? "Enabled" : "Disabled"));
3897         else
3898                 dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3899                          mgp->msi_enabled ? "MSI" : "xPIC",
3900                          netdev->irq, mgp->tx_boundary, mgp->fw_name,
3901                          (mgp->wc_enabled ? "Enabled" : "Disabled"));
3902
3903         return 0;
3904
3905 abort_with_state:
3906         pci_restore_state(pdev);
3907
3908 abort_with_slices:
3909         myri10ge_free_slices(mgp);
3910
3911 abort_with_firmware:
3912         myri10ge_dummy_rdma(mgp, 0);
3913
3914 abort_with_ioremap:
3915         iounmap(mgp->sram);
3916
3917 abort_with_mtrr:
3918 #ifdef CONFIG_MTRR
3919         if (mgp->mtrr >= 0)
3920                 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
3921 #endif
3922         dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3923                           mgp->cmd, mgp->cmd_bus);
3924
3925 abort_with_netdev:
3926
3927         free_netdev(netdev);
3928         return status;
3929 }
3930
3931 /*
3932  * myri10ge_remove
3933  *
3934  * Does what is necessary to shutdown one Myrinet device. Called
3935  *   once for each Myrinet card by the kernel when a module is
3936  *   unloaded.
3937  */
3938 static void myri10ge_remove(struct pci_dev *pdev)
3939 {
3940         struct myri10ge_priv *mgp;
3941         struct net_device *netdev;
3942
3943         mgp = pci_get_drvdata(pdev);
3944         if (mgp == NULL)
3945                 return;
3946
3947         flush_scheduled_work();
3948         netdev = mgp->dev;
3949         unregister_netdev(netdev);
3950
3951 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
3952         myri10ge_teardown_dca(mgp);
3953 #endif
3954         myri10ge_dummy_rdma(mgp, 0);
3955
3956         /* avoid a memory leak */
3957         pci_restore_state(pdev);
3958
3959         iounmap(mgp->sram);
3960
3961 #ifdef CONFIG_MTRR
3962         if (mgp->mtrr >= 0)
3963                 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
3964 #endif
3965         myri10ge_free_slices(mgp);
3966         if (mgp->msix_vectors != NULL)
3967                 kfree(mgp->msix_vectors);
3968         dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3969                           mgp->cmd, mgp->cmd_bus);
3970
3971         free_netdev(netdev);
3972         pci_set_drvdata(pdev, NULL);
3973 }
3974
3975 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
3976 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
3977
3978 static struct pci_device_id myri10ge_pci_tbl[] = {
3979         {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
3980         {PCI_DEVICE
3981          (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
3982         {0},
3983 };
3984
3985 static struct pci_driver myri10ge_driver = {
3986         .name = "myri10ge",
3987         .probe = myri10ge_probe,
3988         .remove = myri10ge_remove,
3989         .id_table = myri10ge_pci_tbl,
3990 #ifdef CONFIG_PM
3991         .suspend = myri10ge_suspend,
3992         .resume = myri10ge_resume,
3993 #endif
3994 };
3995
3996 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
3997 static int
3998 myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
3999 {
4000         int err = driver_for_each_device(&myri10ge_driver.driver,
4001                                          NULL, &event,
4002                                          myri10ge_notify_dca_device);
4003
4004         if (err)
4005                 return NOTIFY_BAD;
4006         return NOTIFY_DONE;
4007 }
4008
4009 static struct notifier_block myri10ge_dca_notifier = {
4010         .notifier_call = myri10ge_notify_dca,
4011         .next = NULL,
4012         .priority = 0,
4013 };
4014 #endif                          /* CONFIG_DCA */
4015
4016 static __init int myri10ge_init_module(void)
4017 {
4018         printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
4019                MYRI10GE_VERSION_STR);
4020
4021         if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4022                 printk(KERN_ERR
4023                        "%s: Illegal rssh hash type %d, defaulting to source port\n",
4024                        myri10ge_driver.name, myri10ge_rss_hash);
4025                 myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4026         }
4027 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
4028         dca_register_notify(&myri10ge_dca_notifier);
4029 #endif
4030         if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4031                 myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4032
4033         return pci_register_driver(&myri10ge_driver);
4034 }
4035
4036 module_init(myri10ge_init_module);
4037
4038 static __exit void myri10ge_cleanup_module(void)
4039 {
4040 #if (defined CONFIG_DCA) || (defined CONFIG_DCA_MODULE)
4041         dca_unregister_notify(&myri10ge_dca_notifier);
4042 #endif
4043         pci_unregister_driver(&myri10ge_driver);
4044 }
4045
4046 module_exit(myri10ge_cleanup_module);