Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
[linux-2.6] / arch / arm / mach-pxa / saar.c
1 /*
2  *  linux/arch/arm/mach-pxa/saar.c
3  *
4  *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
5  *
6  *  Copyright (C) 2007-2008 Marvell International Ltd.
7  *
8  *  This program is free software; you can redistribute it and/or modify
9  *  it under the terms of the GNU General Public License version 2 as
10  *  publishhed by the Free Software Foundation.
11  */
12
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/clk.h>
19 #include <linux/gpio.h>
20 #include <linux/delay.h>
21 #include <linux/fb.h>
22 #include <linux/i2c.h>
23 #include <linux/smc91x.h>
24 #include <linux/mfd/da903x.h>
25
26 #include <asm/mach-types.h>
27 #include <asm/mach/arch.h>
28
29 #include <mach/pxa930.h>
30 #include <plat/i2c.h>
31 #include <mach/pxafb.h>
32
33 #include "devices.h"
34 #include "generic.h"
35
36 #define GPIO_LCD_RESET  (16)
37
38 /* SAAR MFP configurations */
39 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
40         /* LCD */
41         GPIO23_LCD_DD0,
42         GPIO24_LCD_DD1,
43         GPIO25_LCD_DD2,
44         GPIO26_LCD_DD3,
45         GPIO27_LCD_DD4,
46         GPIO28_LCD_DD5,
47         GPIO29_LCD_DD6,
48         GPIO44_LCD_DD7,
49         GPIO21_LCD_CS,
50         GPIO22_LCD_VSYNC,
51         GPIO17_LCD_FCLK_RD,
52         GPIO18_LCD_LCLK_A0,
53         GPIO19_LCD_PCLK_WR,
54         GPIO16_GPIO, /* LCD reset */
55
56         /* Ethernet */
57         DF_nCS1_nCS3,
58         GPIO97_GPIO,
59 };
60
61 #define SAAR_ETH_PHYS   (0x14000000)
62
63 static struct resource smc91x_resources[] = {
64         [0] = {
65                 .start  = (SAAR_ETH_PHYS + 0x300),
66                 .end    = (SAAR_ETH_PHYS + 0xfffff),
67                 .flags  = IORESOURCE_MEM,
68         },
69         [1] = {
70                 .start  = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
71                 .end    = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
72                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
73         }
74 };
75
76 static struct smc91x_platdata saar_smc91x_info = {
77         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
78 };
79
80 static struct platform_device smc91x_device = {
81         .name           = "smc91x",
82         .id             = 0,
83         .num_resources  = ARRAY_SIZE(smc91x_resources),
84         .resource       = smc91x_resources,
85         .dev            = {
86                 .platform_data = &saar_smc91x_info,
87         },
88 };
89
90 #if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
91 static uint16_t lcd_power_on[] = {
92         /* single frame */
93         SMART_CMD_NOOP,
94         SMART_CMD(0x00),
95         SMART_DELAY(0),
96
97         SMART_CMD_NOOP,
98         SMART_CMD(0x00),
99         SMART_DELAY(0),
100
101         SMART_CMD_NOOP,
102         SMART_CMD(0x00),
103         SMART_DELAY(0),
104
105         SMART_CMD_NOOP,
106         SMART_CMD(0x00),
107         SMART_DELAY(10),
108
109         /* calibration control */
110         SMART_CMD(0x00),
111         SMART_CMD(0xA4),
112         SMART_DAT(0x80),
113         SMART_DAT(0x01),
114         SMART_DELAY(150),
115
116         /*Power-On Init sequence*/
117         SMART_CMD(0x00),        /* output ctrl */
118         SMART_CMD(0x01),
119         SMART_DAT(0x01),
120         SMART_DAT(0x00),
121         SMART_CMD(0x00),        /* wave ctrl */
122         SMART_CMD(0x02),
123         SMART_DAT(0x07),
124         SMART_DAT(0x00),
125         SMART_CMD(0x00),
126         SMART_CMD(0x03),        /* entry mode */
127         SMART_DAT(0xD0),
128         SMART_DAT(0x30),
129         SMART_CMD(0x00),
130         SMART_CMD(0x08),        /* display ctrl 2 */
131         SMART_DAT(0x08),
132         SMART_DAT(0x08),
133         SMART_CMD(0x00),
134         SMART_CMD(0x09),        /* display ctrl 3 */
135         SMART_DAT(0x04),
136         SMART_DAT(0x2F),
137         SMART_CMD(0x00),
138         SMART_CMD(0x0A),        /* display ctrl 4 */
139         SMART_DAT(0x00),
140         SMART_DAT(0x08),
141         SMART_CMD(0x00),
142         SMART_CMD(0x0D),        /* Frame Marker position */
143         SMART_DAT(0x00),
144         SMART_DAT(0x08),
145         SMART_CMD(0x00),
146         SMART_CMD(0x60),        /* Driver output control */
147         SMART_DAT(0x27),
148         SMART_DAT(0x00),
149         SMART_CMD(0x00),
150         SMART_CMD(0x61),        /* Base image display control */
151         SMART_DAT(0x00),
152         SMART_DAT(0x01),
153         SMART_CMD(0x00),
154         SMART_CMD(0x30),        /* Y settings 30h-3Dh */
155         SMART_DAT(0x07),
156         SMART_DAT(0x07),
157         SMART_CMD(0x00),
158         SMART_CMD(0x31),
159         SMART_DAT(0x00),
160         SMART_DAT(0x07),
161         SMART_CMD(0x00),
162         SMART_CMD(0x32),        /* Timing(3), ASW HOLD=0.5CLK */
163         SMART_DAT(0x04),
164         SMART_DAT(0x00),
165         SMART_CMD(0x00),
166         SMART_CMD(0x33),        /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
167         SMART_DAT(0x03),
168         SMART_DAT(0x03),
169         SMART_CMD(0x00),
170         SMART_CMD(0x34),
171         SMART_DAT(0x00),
172         SMART_DAT(0x00),
173         SMART_CMD(0x00),
174         SMART_CMD(0x35),
175         SMART_DAT(0x02),
176         SMART_DAT(0x05),
177         SMART_CMD(0x00),
178         SMART_CMD(0x36),
179         SMART_DAT(0x1F),
180         SMART_DAT(0x1F),
181         SMART_CMD(0x00),
182         SMART_CMD(0x37),
183         SMART_DAT(0x07),
184         SMART_DAT(0x07),
185         SMART_CMD(0x00),
186         SMART_CMD(0x38),
187         SMART_DAT(0x00),
188         SMART_DAT(0x07),
189         SMART_CMD(0x00),
190         SMART_CMD(0x39),
191         SMART_DAT(0x04),
192         SMART_DAT(0x00),
193         SMART_CMD(0x00),
194         SMART_CMD(0x3A),
195         SMART_DAT(0x03),
196         SMART_DAT(0x03),
197         SMART_CMD(0x00),
198         SMART_CMD(0x3B),
199         SMART_DAT(0x00),
200         SMART_DAT(0x00),
201         SMART_CMD(0x00),
202         SMART_CMD(0x3C),
203         SMART_DAT(0x02),
204         SMART_DAT(0x05),
205         SMART_CMD(0x00),
206         SMART_CMD(0x3D),
207         SMART_DAT(0x1F),
208         SMART_DAT(0x1F),
209         SMART_CMD(0x00),        /* Display control 1 */
210         SMART_CMD(0x07),
211         SMART_DAT(0x00),
212         SMART_DAT(0x01),
213         SMART_CMD(0x00),        /* Power control 5 */
214         SMART_CMD(0x17),
215         SMART_DAT(0x00),
216         SMART_DAT(0x01),
217         SMART_CMD(0x00),        /* Power control 1 */
218         SMART_CMD(0x10),
219         SMART_DAT(0x10),
220         SMART_DAT(0xB0),
221         SMART_CMD(0x00),        /* Power control 2 */
222         SMART_CMD(0x11),
223         SMART_DAT(0x01),
224         SMART_DAT(0x30),
225         SMART_CMD(0x00),        /* Power control 3 */
226         SMART_CMD(0x12),
227         SMART_DAT(0x01),
228         SMART_DAT(0x9E),
229         SMART_CMD(0x00),        /* Power control 4 */
230         SMART_CMD(0x13),
231         SMART_DAT(0x17),
232         SMART_DAT(0x00),
233         SMART_CMD(0x00),        /* Power control 3 */
234         SMART_CMD(0x12),
235         SMART_DAT(0x01),
236         SMART_DAT(0xBE),
237         SMART_DELAY(100),
238
239         /* display mode : 240*320 */
240         SMART_CMD(0x00),        /* RAM address set(H) 0*/
241         SMART_CMD(0x20),
242         SMART_DAT(0x00),
243         SMART_DAT(0x00),
244         SMART_CMD(0x00),        /* RAM address set(V)   4*/
245         SMART_CMD(0x21),
246         SMART_DAT(0x00),
247         SMART_DAT(0x00),
248         SMART_CMD(0x00),        /* Start of Window RAM address set(H) 8*/
249         SMART_CMD(0x50),
250         SMART_DAT(0x00),
251         SMART_DAT(0x00),
252         SMART_CMD(0x00),        /* End of Window RAM address set(H) 12*/
253         SMART_CMD(0x51),
254         SMART_DAT(0x00),
255         SMART_DAT(0xEF),
256         SMART_CMD(0x00),        /* Start of Window RAM address set(V) 16*/
257         SMART_CMD(0x52),
258         SMART_DAT(0x00),
259         SMART_DAT(0x00),
260         SMART_CMD(0x00),        /* End of Window RAM address set(V) 20*/
261         SMART_CMD(0x53),
262         SMART_DAT(0x01),
263         SMART_DAT(0x3F),
264         SMART_CMD(0x00),        /* Panel interface control 1 */
265         SMART_CMD(0x90),
266         SMART_DAT(0x00),
267         SMART_DAT(0x1A),
268         SMART_CMD(0x00),        /* Panel interface control 2 */
269         SMART_CMD(0x92),
270         SMART_DAT(0x04),
271         SMART_DAT(0x00),
272         SMART_CMD(0x00),        /* Panel interface control 3 */
273         SMART_CMD(0x93),
274         SMART_DAT(0x00),
275         SMART_DAT(0x05),
276         SMART_DELAY(20),
277 };
278
279 static uint16_t lcd_panel_on[] = {
280         SMART_CMD(0x00),
281         SMART_CMD(0x07),
282         SMART_DAT(0x00),
283         SMART_DAT(0x21),
284         SMART_DELAY(1),
285
286         SMART_CMD(0x00),
287         SMART_CMD(0x07),
288         SMART_DAT(0x00),
289         SMART_DAT(0x61),
290         SMART_DELAY(100),
291
292         SMART_CMD(0x00),
293         SMART_CMD(0x07),
294         SMART_DAT(0x01),
295         SMART_DAT(0x73),
296         SMART_DELAY(1),
297 };
298
299 static uint16_t lcd_panel_off[] = {
300         SMART_CMD(0x00),
301         SMART_CMD(0x07),
302         SMART_DAT(0x00),
303         SMART_DAT(0x72),
304         SMART_DELAY(40),
305
306         SMART_CMD(0x00),
307         SMART_CMD(0x07),
308         SMART_DAT(0x00),
309         SMART_DAT(0x01),
310         SMART_DELAY(1),
311
312         SMART_CMD(0x00),
313         SMART_CMD(0x07),
314         SMART_DAT(0x00),
315         SMART_DAT(0x00),
316         SMART_DELAY(1),
317 };
318
319 static uint16_t lcd_power_off[] = {
320         SMART_CMD(0x00),
321         SMART_CMD(0x10),
322         SMART_DAT(0x00),
323         SMART_DAT(0x80),
324
325         SMART_CMD(0x00),
326         SMART_CMD(0x11),
327         SMART_DAT(0x01),
328         SMART_DAT(0x60),
329
330         SMART_CMD(0x00),
331         SMART_CMD(0x12),
332         SMART_DAT(0x01),
333         SMART_DAT(0xAE),
334         SMART_DELAY(40),
335
336         SMART_CMD(0x00),
337         SMART_CMD(0x10),
338         SMART_DAT(0x00),
339         SMART_DAT(0x00),
340 };
341
342 static uint16_t update_framedata[] = {
343         /* set display ram: 240*320 */
344         SMART_CMD(0x00), /* RAM address set(H) 0*/
345         SMART_CMD(0x20),
346         SMART_DAT(0x00),
347         SMART_DAT(0x00),
348         SMART_CMD(0x00), /* RAM address set(V) 4*/
349         SMART_CMD(0x21),
350         SMART_DAT(0x00),
351         SMART_DAT(0x00),
352         SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
353         SMART_CMD(0x50),
354         SMART_DAT(0x00),
355         SMART_DAT(0x00),
356         SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
357         SMART_CMD(0x51),
358         SMART_DAT(0x00),
359         SMART_DAT(0xEF),
360         SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
361         SMART_CMD(0x52),
362         SMART_DAT(0x00),
363         SMART_DAT(0x00),
364         SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
365         SMART_CMD(0x53),
366         SMART_DAT(0x01),
367         SMART_DAT(0x3F),
368
369         /* wait for vsync cmd before transferring frame data */
370         SMART_CMD_WAIT_FOR_VSYNC,
371
372         /* write ram */
373         SMART_CMD(0x00),
374         SMART_CMD(0x22),
375
376         /* write frame data */
377         SMART_CMD_WRITE_FRAME,
378 };
379
380 static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
381 {
382         static int pin_requested = 0;
383         struct fb_info *info = container_of(var, struct fb_info, var);
384         int err;
385
386         if (!pin_requested) {
387                 err = gpio_request(GPIO_LCD_RESET, "lcd reset");
388                 if (err) {
389                         pr_err("failed to request gpio for LCD reset\n");
390                         return;
391                 }
392
393                 gpio_direction_output(GPIO_LCD_RESET, 0);
394                 pin_requested = 1;
395         }
396
397         if (on) {
398                 gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
399                 gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
400
401                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
402                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
403         } else {
404                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
405                 pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
406         }
407
408         err = pxafb_smart_flush(info);
409         if (err)
410                 pr_err("%s: timed out\n", __func__);
411 }
412
413 static void ltm022a97a_update(struct fb_info *info)
414 {
415         pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
416         pxafb_smart_flush(info);
417 }
418
419 static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
420         [0] = {
421                 .xres                   = 240,
422                 .yres                   = 320,
423                 .bpp                    = 16,
424                 .a0csrd_set_hld         = 30,
425                 .a0cswr_set_hld         = 30,
426                 .wr_pulse_width         = 30,
427                 .rd_pulse_width         = 30,
428                 .op_hold_time           = 30,
429                 .cmd_inh_time           = 60,
430
431                 /* L_LCLK_A0 and L_LCLK_RD active low */
432                 .sync                   = FB_SYNC_HOR_HIGH_ACT |
433                                           FB_SYNC_VERT_HIGH_ACT,
434         },
435 };
436
437 static struct pxafb_mach_info saar_lcd_info = {
438         .modes                  = toshiba_ltm022a97a_modes,
439         .num_modes              = 1,
440         .lcd_conn               = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
441         .pxafb_lcd_power        = ltm022a97a_lcd_power,
442         .smart_update           = ltm022a97a_update,
443 };
444
445 static void __init saar_init_lcd(void)
446 {
447         set_pxa_fb_info(&saar_lcd_info);
448 }
449 #else
450 static inline void saar_init_lcd(void) {}
451 #endif
452
453 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
454 static struct da903x_subdev_info saar_da9034_subdevs[] = {
455         [0] = {
456                 .name           = "da903x-backlight",
457                 .id             = DA9034_ID_WLED,
458         },
459 };
460
461 static struct da903x_platform_data saar_da9034_info = {
462         .num_subdevs    = ARRAY_SIZE(saar_da9034_subdevs),
463         .subdevs        = saar_da9034_subdevs,
464 };
465
466 static struct i2c_board_info saar_i2c_info[] = {
467         [0] = {
468                 .type           = "da9034",
469                 .addr           = 0x34,
470                 .platform_data  = &saar_da9034_info,
471                 .irq            = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
472         },
473 };
474
475 static void __init saar_init_i2c(void)
476 {
477         pxa_set_i2c_info(NULL);
478         i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
479 }
480 #else
481 static inline void saar_init_i2c(void) {}
482 #endif
483 static void __init saar_init(void)
484 {
485         /* initialize MFP configurations */
486         pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
487
488         platform_device_register(&smc91x_device);
489
490         saar_init_i2c();
491         saar_init_lcd();
492 }
493
494 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
495         /* Maintainer: Eric Miao <eric.miao@marvell.com> */
496         .phys_io        = 0x40000000,
497         .boot_params    = 0xa0000100,
498         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
499         .map_io         = pxa_map_io,
500         .init_irq       = pxa3xx_init_irq,
501         .timer          = &pxa_timer,
502         .init_machine   = saar_init,
503 MACHINE_END