git.oblomov.eu Git - linux-2.6/blob - drivers/usb/storage/usb.c

   1 /* Driver for USB Mass Storage compliant devices
   2  *
   3  * $Id: usb.c,v 1.75 2002/04/22 03:39:43 mdharm Exp $
   4  *
   5  * Current development and maintenance by:
   6  *   (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   7  *
   8  * Developed with the assistance of:
   9  *   (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
  10  *   (c) 2003 Alan Stern (stern@rowland.harvard.edu)
  11  *
  12  * Initial work by:
  13  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  14  *
  15  * usb_device_id support by Adam J. Richter (adam@yggdrasil.com):
  16  *   (c) 2000 Yggdrasil Computing, Inc.
  17  *
  18  * This driver is based on the 'USB Mass Storage Class' document. This
  19  * describes in detail the protocol used to communicate with such
  20  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  21  * mind when they created this document.  The commands are all very
  22  * similar to commands in the SCSI-II and ATAPI specifications.
  23  *
  24  * It is important to note that in a number of cases this class
  25  * exhibits class-specific exemptions from the USB specification.
  26  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  27  * that they are used to communicate wait, failed and OK on commands.
  28  *
  29  * Also, for certain devices, the interrupt endpoint is used to convey
  30  * status of a command.
  31  *
  32  * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
  33  * information about this driver.
  34  *
  35  * This program is free software; you can redistribute it and/or modify it
  36  * under the terms of the GNU General Public License as published by the
  37  * Free Software Foundation; either version 2, or (at your option) any
  38  * later version.
  39  *
  40  * This program is distributed in the hope that it will be useful, but
  41  * WITHOUT ANY WARRANTY; without even the implied warranty of
  42  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  43  * General Public License for more details.
  44  *
  45  * You should have received a copy of the GNU General Public License along
  46  * with this program; if not, write to the Free Software Foundation, Inc.,
  47  * 675 Mass Ave, Cambridge, MA 02139, USA.
  48  */
  49
  50 #include <linux/sched.h>
  51 #include <linux/errno.h>
  52 #include <linux/freezer.h>
  53 #include <linux/module.h>
  54 #include <linux/init.h>
  55 #include <linux/slab.h>
  56 #include <linux/kthread.h>
  57 #include <linux/mutex.h>
  58 #include <linux/utsrelease.h>
  59
  60 #include <scsi/scsi.h>
  61 #include <scsi/scsi_cmnd.h>
  62 #include <scsi/scsi_device.h>
  63
  64 #include "usb.h"
  65 #include "scsiglue.h"
  66 #include "transport.h"
  67 #include "protocol.h"
  68 #include "debug.h"
  69 #include "initializers.h"
  70
  71 #ifdef CONFIG_USB_STORAGE_USBAT
  72 #include "shuttle_usbat.h"
  73 #endif
  74 #ifdef CONFIG_USB_STORAGE_SDDR09
  75 #include "sddr09.h"
  76 #endif
  77 #ifdef CONFIG_USB_STORAGE_SDDR55
  78 #include "sddr55.h"
  79 #endif
  80 #ifdef CONFIG_USB_STORAGE_DPCM
  81 #include "dpcm.h"
  82 #endif
  83 #ifdef CONFIG_USB_STORAGE_FREECOM
  84 #include "freecom.h"
  85 #endif
  86 #ifdef CONFIG_USB_STORAGE_ISD200
  87 #include "isd200.h"
  88 #endif
  89 #ifdef CONFIG_USB_STORAGE_DATAFAB
  90 #include "datafab.h"
  91 #endif
  92 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
  93 #include "jumpshot.h"
  94 #endif
  95 #ifdef CONFIG_USB_STORAGE_ONETOUCH
  96 #include "onetouch.h"
  97 #endif
  98 #ifdef CONFIG_USB_STORAGE_ALAUDA
  99 #include "alauda.h"
 100 #endif
 101 #ifdef CONFIG_USB_STORAGE_KARMA
 102 #include "karma.h"
 103 #endif
 104
 105 /* Some informational data */
 106 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
 107 MODULE_DESCRIPTION("USB Mass Storage driver for Linux");
 108 MODULE_LICENSE("GPL");
 109
 110 static unsigned int delay_use = 5;
 111 module_param(delay_use, uint, S_IRUGO | S_IWUSR);
 112 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device");
 113
 114
 115 /* These are used to make sure the module doesn't unload before all the
 116  * threads have exited.
 117  */
 118 static atomic_t total_threads = ATOMIC_INIT(0);
 119 static DECLARE_COMPLETION(threads_gone);
 120
 121
 122 /*
 123  * The entries in this table correspond, line for line,
 124  * with the entries of us_unusual_dev_list[].
 125  */
 126 #ifndef CONFIG_USB_LIBUSUAL
 127
 128 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
 129                     vendorName, productName,useProtocol, useTransport, \
 130                     initFunction, flags) \
 131 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
 132   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 133
 134 #define USUAL_DEV(useProto, useTrans, useType) \
 135 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
 136   .driver_info = (USB_US_TYPE_STOR<<24) }
 137
 138 static struct usb_device_id storage_usb_ids [] = {
 139
 140 #       include "unusual_devs.h"
 141 #undef UNUSUAL_DEV
 142 #undef USUAL_DEV
 143         /* Terminating entry */
 144         { }
 145 };
 146
 147 MODULE_DEVICE_TABLE (usb, storage_usb_ids);
 148 #endif /* CONFIG_USB_LIBUSUAL */
 149
 150 /* This is the list of devices we recognize, along with their flag data */
 151
 152 /* The vendor name should be kept at eight characters or less, and
 153  * the product name should be kept at 16 characters or less. If a device
 154  * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
 155  * normally generated by a device thorugh the INQUIRY response will be
 156  * taken from this list, and this is the reason for the above size
 157  * restriction. However, if the flag is not present, then you
 158  * are free to use as many characters as you like.
 159  */
 160
 161 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
 162                     vendor_name, product_name, use_protocol, use_transport, \
 163                     init_function, Flags) \
 164 { \
 165         .vendorName = vendor_name,      \
 166         .productName = product_name,    \
 167         .useProtocol = use_protocol,    \
 168         .useTransport = use_transport,  \
 169         .initFunction = init_function,  \
 170 }
 171
 172 #define USUAL_DEV(use_protocol, use_transport, use_type) \
 173 { \
 174         .useProtocol = use_protocol,    \
 175         .useTransport = use_transport,  \
 176 }
 177
 178 static struct us_unusual_dev us_unusual_dev_list[] = {
 179 #       include "unusual_devs.h"
 180 #       undef UNUSUAL_DEV
 181 #       undef USUAL_DEV
 182
 183         /* Terminating entry */
 184         { NULL }
 185 };
 186
 187
 188 #ifdef CONFIG_PM        /* Minimal support for suspend and resume */
 189
 190 static int storage_suspend(struct usb_interface *iface, pm_message_t message)
 191 {
 192         struct us_data *us = usb_get_intfdata(iface);
 193
 194         /* Wait until no command is running */
 195         mutex_lock(&us->dev_mutex);
 196
 197         US_DEBUGP("%s\n", __FUNCTION__);
 198         if (us->suspend_resume_hook)
 199                 (us->suspend_resume_hook)(us, US_SUSPEND);
 200         iface->dev.power.power_state.event = message.event;
 201
 202         /* When runtime PM is working, we'll set a flag to indicate
 203          * whether we should autoresume when a SCSI request arrives. */
 204
 205         mutex_unlock(&us->dev_mutex);
 206         return 0;
 207 }
 208
 209 static int storage_resume(struct usb_interface *iface)
 210 {
 211         struct us_data *us = usb_get_intfdata(iface);
 212
 213         mutex_lock(&us->dev_mutex);
 214
 215         US_DEBUGP("%s\n", __FUNCTION__);
 216         if (us->suspend_resume_hook)
 217                 (us->suspend_resume_hook)(us, US_RESUME);
 218         iface->dev.power.power_state.event = PM_EVENT_ON;
 219
 220         mutex_unlock(&us->dev_mutex);
 221         return 0;
 222 }
 223
 224 #endif /* CONFIG_PM */
 225
 226 /*
 227  * The next two routines get called just before and just after
 228  * a USB port reset, whether from this driver or a different one.
 229  */
 230
 231 static void storage_pre_reset(struct usb_interface *iface)
 232 {
 233         struct us_data *us = usb_get_intfdata(iface);
 234
 235         US_DEBUGP("%s\n", __FUNCTION__);
 236
 237         /* Make sure no command runs during the reset */
 238         mutex_lock(&us->dev_mutex);
 239 }
 240
 241 static void storage_post_reset(struct usb_interface *iface)
 242 {
 243         struct us_data *us = usb_get_intfdata(iface);
 244
 245         US_DEBUGP("%s\n", __FUNCTION__);
 246
 247         /* Report the reset to the SCSI core */
 248         scsi_lock(us_to_host(us));
 249         usb_stor_report_bus_reset(us);
 250         scsi_unlock(us_to_host(us));
 251
 252         /* FIXME: Notify the subdrivers that they need to reinitialize
 253          * the device */
 254         mutex_unlock(&us->dev_mutex);
 255 }
 256
 257 /*
 258  * fill_inquiry_response takes an unsigned char array (which must
 259  * be at least 36 characters) and populates the vendor name,
 260  * product name, and revision fields. Then the array is copied
 261  * into the SCSI command's response buffer (oddly enough
 262  * called request_buffer). data_len contains the length of the
 263  * data array, which again must be at least 36.
 264  */
 265
 266 void fill_inquiry_response(struct us_data *us, unsigned char *data,
 267                 unsigned int data_len)
 268 {
 269         if (data_len<36) // You lose.
 270                 return;
 271
 272         if(data[0]&0x20) { /* USB device currently not connected. Return
 273                               peripheral qualifier 001b ("...however, the
 274                               physical device is not currently connected
 275                               to this logical unit") and leave vendor and
 276                               product identification empty. ("If the target
 277                               does store some of the INQUIRY data on the
 278                               device, it may return zeros or ASCII spaces
 279                               (20h) in those fields until the data is
 280                               available from the device."). */
 281                 memset(data+8,0,28);
 282         } else {
 283                 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice);
 284                 memcpy(data+8, us->unusual_dev->vendorName,
 285                         strlen(us->unusual_dev->vendorName) > 8 ? 8 :
 286                         strlen(us->unusual_dev->vendorName));
 287                 memcpy(data+16, us->unusual_dev->productName,
 288                         strlen(us->unusual_dev->productName) > 16 ? 16 :
 289                         strlen(us->unusual_dev->productName));
 290                 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F);
 291                 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F);
 292                 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F);
 293                 data[35] = 0x30 + ((bcdDevice) & 0x0F);
 294         }
 295
 296         usb_stor_set_xfer_buf(data, data_len, us->srb);
 297 }
 298
 299 static int usb_stor_control_thread(void * __us)
 300 {
 301         struct us_data *us = (struct us_data *)__us;
 302         struct Scsi_Host *host = us_to_host(us);
 303
 304         current->flags |= PF_NOFREEZE;
 305
 306         for(;;) {
 307                 US_DEBUGP("*** thread sleeping.\n");
 308                 if(down_interruptible(&us->sema))
 309                         break;
 310
 311                 US_DEBUGP("*** thread awakened.\n");
 312
 313                 /* lock the device pointers */
 314                 mutex_lock(&(us->dev_mutex));
 315
 316                 /* if the device has disconnected, we are free to exit */
 317                 if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
 318                         US_DEBUGP("-- exiting\n");
 319                         mutex_unlock(&us->dev_mutex);
 320                         break;
 321                 }
 322
 323                 /* lock access to the state */
 324                 scsi_lock(host);
 325
 326                 /* has the command timed out *already* ? */
 327                 if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
 328                         us->srb->result = DID_ABORT << 16;
 329                         goto SkipForAbort;
 330                 }
 331
 332                 scsi_unlock(host);
 333
 334                 /* reject the command if the direction indicator
 335                  * is UNKNOWN
 336                  */
 337                 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) {
 338                         US_DEBUGP("UNKNOWN data direction\n");
 339                         us->srb->result = DID_ERROR << 16;
 340                 }
 341
 342                 /* reject if target != 0 or if LUN is higher than
 343                  * the maximum known LUN
 344                  */
 345                 else if (us->srb->device->id &&
 346                                 !(us->flags & US_FL_SCM_MULT_TARG)) {
 347                         US_DEBUGP("Bad target number (%d:%d)\n",
 348                                   us->srb->device->id, us->srb->device->lun);
 349                         us->srb->result = DID_BAD_TARGET << 16;
 350                 }
 351
 352                 else if (us->srb->device->lun > us->max_lun) {
 353                         US_DEBUGP("Bad LUN (%d:%d)\n",
 354                                   us->srb->device->id, us->srb->device->lun);
 355                         us->srb->result = DID_BAD_TARGET << 16;
 356                 }
 357
 358                 /* Handle those devices which need us to fake
 359                  * their inquiry data */
 360                 else if ((us->srb->cmnd[0] == INQUIRY) &&
 361                             (us->flags & US_FL_FIX_INQUIRY)) {
 362                         unsigned char data_ptr[36] = {
 363                             0x00, 0x80, 0x02, 0x02,
 364                             0x1F, 0x00, 0x00, 0x00};
 365
 366                         US_DEBUGP("Faking INQUIRY command\n");
 367                         fill_inquiry_response(us, data_ptr, 36);
 368                         us->srb->result = SAM_STAT_GOOD;
 369                 }
 370
 371                 /* we've got a command, let's do it! */
 372                 else {
 373                         US_DEBUG(usb_stor_show_command(us->srb));
 374                         us->proto_handler(us->srb, us);
 375                 }
 376
 377                 /* lock access to the state */
 378                 scsi_lock(host);
 379
 380                 /* did the command already complete because of a disconnect? */
 381                 if (!us->srb)
 382                         ;               /* nothing to do */
 383
 384                 /* indicate that the command is done */
 385                 else if (us->srb->result != DID_ABORT << 16) {
 386                         US_DEBUGP("scsi cmd done, result=0x%x\n",
 387                                    us->srb->result);
 388                         us->srb->scsi_done(us->srb);
 389                 } else {
 390 SkipForAbort:
 391                         US_DEBUGP("scsi command aborted\n");
 392                 }
 393
 394                 /* If an abort request was received we need to signal that
 395                  * the abort has finished.  The proper test for this is
 396                  * the TIMED_OUT flag, not srb->result == DID_ABORT, because
 397                  * the timeout might have occurred after the command had
 398                  * already completed with a different result code. */
 399                 if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
 400                         complete(&(us->notify));
 401
 402                         /* Allow USB transfers to resume */
 403                         clear_bit(US_FLIDX_ABORTING, &us->flags);
 404                         clear_bit(US_FLIDX_TIMED_OUT, &us->flags);
 405                 }
 406
 407                 /* finished working on this command */
 408                 us->srb = NULL;
 409                 scsi_unlock(host);
 410
 411                 /* unlock the device pointers */
 412                 mutex_unlock(&us->dev_mutex);
 413         } /* for (;;) */
 414
 415         scsi_host_put(host);
 416
 417         /* notify the exit routine that we're actually exiting now
 418          *
 419          * complete()/wait_for_completion() is similar to up()/down(),
 420          * except that complete() is safe in the case where the structure
 421          * is getting deleted in a parallel mode of execution (i.e. just
 422          * after the down() -- that's necessary for the thread-shutdown
 423          * case.
 424          *
 425          * complete_and_exit() goes even further than this -- it is safe in
 426          * the case that the thread of the caller is going away (not just
 427          * the structure) -- this is necessary for the module-remove case.
 428          * This is important in preemption kernels, which transfer the flow
 429          * of execution immediately upon a complete().
 430          */
 431         complete_and_exit(&threads_gone, 0);
 432 }
 433
 434 /***********************************************************************
 435  * Device probing and disconnecting
 436  ***********************************************************************/
 437
 438 /* Associate our private data with the USB device */
 439 static int associate_dev(struct us_data *us, struct usb_interface *intf)
 440 {
 441         US_DEBUGP("-- %s\n", __FUNCTION__);
 442
 443         /* Fill in the device-related fields */
 444         us->pusb_dev = interface_to_usbdev(intf);
 445         us->pusb_intf = intf;
 446         us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 447         US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n",
 448                         le16_to_cpu(us->pusb_dev->descriptor.idVendor),
 449                         le16_to_cpu(us->pusb_dev->descriptor.idProduct),
 450                         le16_to_cpu(us->pusb_dev->descriptor.bcdDevice));
 451         US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n",
 452                         intf->cur_altsetting->desc.bInterfaceSubClass,
 453                         intf->cur_altsetting->desc.bInterfaceProtocol);
 454
 455         /* Store our private data in the interface */
 456         usb_set_intfdata(intf, us);
 457
 458         /* Allocate the device-related DMA-mapped buffers */
 459         us->cr = usb_buffer_alloc(us->pusb_dev, sizeof(*us->cr),
 460                         GFP_KERNEL, &us->cr_dma);
 461         if (!us->cr) {
 462                 US_DEBUGP("usb_ctrlrequest allocation failed\n");
 463                 return -ENOMEM;
 464         }
 465
 466         us->iobuf = usb_buffer_alloc(us->pusb_dev, US_IOBUF_SIZE,
 467                         GFP_KERNEL, &us->iobuf_dma);
 468         if (!us->iobuf) {
 469                 US_DEBUGP("I/O buffer allocation failed\n");
 470                 return -ENOMEM;
 471         }
 472
 473         us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
 474         if (!us->sensebuf) {
 475                 US_DEBUGP("Sense buffer allocation failed\n");
 476                 return -ENOMEM;
 477         }
 478         return 0;
 479 }
 480
 481 /* Find an unusual_dev descriptor (always succeeds in the current code) */
 482 static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
 483 {
 484         const int id_index = id - storage_usb_ids;
 485         return &us_unusual_dev_list[id_index];
 486 }
 487
 488 /* Get the unusual_devs entries and the string descriptors */
 489 static int get_device_info(struct us_data *us, const struct usb_device_id *id)
 490 {
 491         struct usb_device *dev = us->pusb_dev;
 492         struct usb_interface_descriptor *idesc =
 493                 &us->pusb_intf->cur_altsetting->desc;
 494         struct us_unusual_dev *unusual_dev = find_unusual(id);
 495
 496         /* Store the entries */
 497         us->unusual_dev = unusual_dev;
 498         us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
 499                         idesc->bInterfaceSubClass :
 500                         unusual_dev->useProtocol;
 501         us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
 502                         idesc->bInterfaceProtocol :
 503                         unusual_dev->useTransport;
 504         us->flags = USB_US_ORIG_FLAGS(id->driver_info);
 505
 506         if (us->flags & US_FL_IGNORE_DEVICE) {
 507                 printk(KERN_INFO USB_STORAGE "device ignored\n");
 508                 return -ENODEV;
 509         }
 510
 511         /*
 512          * This flag is only needed when we're in high-speed, so let's
 513          * disable it if we're in full-speed
 514          */
 515         if (dev->speed != USB_SPEED_HIGH)
 516                 us->flags &= ~US_FL_GO_SLOW;
 517
 518         /* Log a message if a non-generic unusual_dev entry contains an
 519          * unnecessary subclass or protocol override.  This may stimulate
 520          * reports from users that will help us remove unneeded entries
 521          * from the unusual_devs.h table.
 522          */
 523         if (id->idVendor || id->idProduct) {
 524                 static const char *msgs[3] = {
 525                         "an unneeded SubClass entry",
 526                         "an unneeded Protocol entry",
 527                         "unneeded SubClass and Protocol entries"};
 528                 struct usb_device_descriptor *ddesc = &dev->descriptor;
 529                 int msg = -1;
 530
 531                 if (unusual_dev->useProtocol != US_SC_DEVICE &&
 532                         us->subclass == idesc->bInterfaceSubClass)
 533                         msg += 1;
 534                 if (unusual_dev->useTransport != US_PR_DEVICE &&
 535                         us->protocol == idesc->bInterfaceProtocol)
 536                         msg += 2;
 537                 if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
 538                         printk(KERN_NOTICE USB_STORAGE "This device "
 539                                 "(%04x,%04x,%04x S %02x P %02x)"
 540                                 " has %s in unusual_devs.h (kernel"
 541                                 " %s)\n"
 542                                 "   Please send a copy of this message to "
 543                                 "<linux-usb-devel@lists.sourceforge.net>\n",
 544                                 le16_to_cpu(ddesc->idVendor),
 545                                 le16_to_cpu(ddesc->idProduct),
 546                                 le16_to_cpu(ddesc->bcdDevice),
 547                                 idesc->bInterfaceSubClass,
 548                                 idesc->bInterfaceProtocol,
 549                                 msgs[msg],
 550                                 UTS_RELEASE);
 551         }
 552
 553         return 0;
 554 }
 555
 556 /* Get the transport settings */
 557 static int get_transport(struct us_data *us)
 558 {
 559         switch (us->protocol) {
 560         case US_PR_CB:
 561                 us->transport_name = "Control/Bulk";
 562                 us->transport = usb_stor_CB_transport;
 563                 us->transport_reset = usb_stor_CB_reset;
 564                 us->max_lun = 7;
 565                 break;
 566
 567         case US_PR_CBI:
 568                 us->transport_name = "Control/Bulk/Interrupt";
 569                 us->transport = usb_stor_CBI_transport;
 570                 us->transport_reset = usb_stor_CB_reset;
 571                 us->max_lun = 7;
 572                 break;
 573
 574         case US_PR_BULK:
 575                 us->transport_name = "Bulk";
 576                 us->transport = usb_stor_Bulk_transport;
 577                 us->transport_reset = usb_stor_Bulk_reset;
 578                 break;
 579
 580 #ifdef CONFIG_USB_STORAGE_USBAT
 581         case US_PR_USBAT:
 582                 us->transport_name = "Shuttle USBAT";
 583                 us->transport = usbat_transport;
 584                 us->transport_reset = usb_stor_CB_reset;
 585                 us->max_lun = 1;
 586                 break;
 587 #endif
 588
 589 #ifdef CONFIG_USB_STORAGE_SDDR09
 590         case US_PR_EUSB_SDDR09:
 591                 us->transport_name = "EUSB/SDDR09";
 592                 us->transport = sddr09_transport;
 593                 us->transport_reset = usb_stor_CB_reset;
 594                 us->max_lun = 0;
 595                 break;
 596 #endif
 597
 598 #ifdef CONFIG_USB_STORAGE_SDDR55
 599         case US_PR_SDDR55:
 600                 us->transport_name = "SDDR55";
 601                 us->transport = sddr55_transport;
 602                 us->transport_reset = sddr55_reset;
 603                 us->max_lun = 0;
 604                 break;
 605 #endif
 606
 607 #ifdef CONFIG_USB_STORAGE_DPCM
 608         case US_PR_DPCM_USB:
 609                 us->transport_name = "Control/Bulk-EUSB/SDDR09";
 610                 us->transport = dpcm_transport;
 611                 us->transport_reset = usb_stor_CB_reset;
 612                 us->max_lun = 1;
 613                 break;
 614 #endif
 615
 616 #ifdef CONFIG_USB_STORAGE_FREECOM
 617         case US_PR_FREECOM:
 618                 us->transport_name = "Freecom";
 619                 us->transport = freecom_transport;
 620                 us->transport_reset = usb_stor_freecom_reset;
 621                 us->max_lun = 0;
 622                 break;
 623 #endif
 624
 625 #ifdef CONFIG_USB_STORAGE_DATAFAB
 626         case US_PR_DATAFAB:
 627                 us->transport_name  = "Datafab Bulk-Only";
 628                 us->transport = datafab_transport;
 629                 us->transport_reset = usb_stor_Bulk_reset;
 630                 us->max_lun = 1;
 631                 break;
 632 #endif
 633
 634 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
 635         case US_PR_JUMPSHOT:
 636                 us->transport_name  = "Lexar Jumpshot Control/Bulk";
 637                 us->transport = jumpshot_transport;
 638                 us->transport_reset = usb_stor_Bulk_reset;
 639                 us->max_lun = 1;
 640                 break;
 641 #endif
 642
 643 #ifdef CONFIG_USB_STORAGE_ALAUDA
 644         case US_PR_ALAUDA:
 645                 us->transport_name  = "Alauda Control/Bulk";
 646                 us->transport = alauda_transport;
 647                 us->transport_reset = usb_stor_Bulk_reset;
 648                 us->max_lun = 1;
 649                 break;
 650 #endif
 651
 652 #ifdef CONFIG_USB_STORAGE_KARMA
 653         case US_PR_KARMA:
 654                 us->transport_name = "Rio Karma/Bulk";
 655                 us->transport = rio_karma_transport;
 656                 us->transport_reset = usb_stor_Bulk_reset;
 657                 break;
 658 #endif
 659
 660         default:
 661                 return -EIO;
 662         }
 663         US_DEBUGP("Transport: %s\n", us->transport_name);
 664
 665         /* fix for single-lun devices */
 666         if (us->flags & US_FL_SINGLE_LUN)
 667                 us->max_lun = 0;
 668         return 0;
 669 }
 670
 671 /* Get the protocol settings */
 672 static int get_protocol(struct us_data *us)
 673 {
 674         switch (us->subclass) {
 675         case US_SC_RBC:
 676                 us->protocol_name = "Reduced Block Commands (RBC)";
 677                 us->proto_handler = usb_stor_transparent_scsi_command;
 678                 break;
 679
 680         case US_SC_8020:
 681                 us->protocol_name = "8020i";
 682                 us->proto_handler = usb_stor_ATAPI_command;
 683                 us->max_lun = 0;
 684                 break;
 685
 686         case US_SC_QIC:
 687                 us->protocol_name = "QIC-157";
 688                 us->proto_handler = usb_stor_qic157_command;
 689                 us->max_lun = 0;
 690                 break;
 691
 692         case US_SC_8070:
 693                 us->protocol_name = "8070i";
 694                 us->proto_handler = usb_stor_ATAPI_command;
 695                 us->max_lun = 0;
 696                 break;
 697
 698         case US_SC_SCSI:
 699                 us->protocol_name = "Transparent SCSI";
 700                 us->proto_handler = usb_stor_transparent_scsi_command;
 701                 break;
 702
 703         case US_SC_UFI:
 704                 us->protocol_name = "Uniform Floppy Interface (UFI)";
 705                 us->proto_handler = usb_stor_ufi_command;
 706                 break;
 707
 708 #ifdef CONFIG_USB_STORAGE_ISD200
 709         case US_SC_ISD200:
 710                 us->protocol_name = "ISD200 ATA/ATAPI";
 711                 us->proto_handler = isd200_ata_command;
 712                 break;
 713 #endif
 714
 715         default:
 716                 return -EIO;
 717         }
 718         US_DEBUGP("Protocol: %s\n", us->protocol_name);
 719         return 0;
 720 }
 721
 722 /* Get the pipe settings */
 723 static int get_pipes(struct us_data *us)
 724 {
 725         struct usb_host_interface *altsetting =
 726                 us->pusb_intf->cur_altsetting;
 727         int i;
 728         struct usb_endpoint_descriptor *ep;
 729         struct usb_endpoint_descriptor *ep_in = NULL;
 730         struct usb_endpoint_descriptor *ep_out = NULL;
 731         struct usb_endpoint_descriptor *ep_int = NULL;
 732
 733         /*
 734          * Find the endpoints we need.
 735          * We are expecting a minimum of 2 endpoints - in and out (bulk).
 736          * An optional interrupt is OK (necessary for CBI protocol).
 737          * We will ignore any others.
 738          */
 739         for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
 740                 ep = &altsetting->endpoint[i].desc;
 741
 742                 /* Is it a BULK endpoint? */
 743                 if (usb_endpoint_xfer_bulk(ep)) {
 744                         /* BULK in or out? */
 745                         if (usb_endpoint_dir_in(ep))
 746                                 ep_in = ep;
 747                         else
 748                                 ep_out = ep;
 749                 }
 750
 751                 /* Is it an interrupt endpoint? */
 752                 else if (usb_endpoint_xfer_int(ep)) {
 753                         ep_int = ep;
 754                 }
 755         }
 756
 757         if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
 758                 US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
 759                 return -EIO;
 760         }
 761
 762         /* Calculate and store the pipe values */
 763         us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0);
 764         us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0);
 765         us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev,
 766                 ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 767         us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev,
 768                 ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 769         if (ep_int) {
 770                 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev,
 771                         ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 772                 us->ep_bInterval = ep_int->bInterval;
 773         }
 774         return 0;
 775 }
 776
 777 /* Initialize all the dynamic resources we need */
 778 static int usb_stor_acquire_resources(struct us_data *us)
 779 {
 780         int p;
 781         struct task_struct *th;
 782
 783         us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
 784         if (!us->current_urb) {
 785                 US_DEBUGP("URB allocation failed\n");
 786                 return -ENOMEM;
 787         }
 788
 789         /* Just before we start our control thread, initialize
 790          * the device if it needs initialization */
 791         if (us->unusual_dev->initFunction) {
 792                 p = us->unusual_dev->initFunction(us);
 793                 if (p)
 794                         return p;
 795         }
 796
 797         /* Start up our control thread */
 798         th = kthread_create(usb_stor_control_thread, us, "usb-storage");
 799         if (IS_ERR(th)) {
 800                 printk(KERN_WARNING USB_STORAGE
 801                        "Unable to start control thread\n");
 802                 return PTR_ERR(th);
 803         }
 804
 805         /* Take a reference to the host for the control thread and
 806          * count it among all the threads we have launched.  Then
 807          * start it up. */
 808         scsi_host_get(us_to_host(us));
 809         atomic_inc(&total_threads);
 810         wake_up_process(th);
 811
 812         return 0;
 813 }
 814
 815 /* Release all our dynamic resources */
 816 static void usb_stor_release_resources(struct us_data *us)
 817 {
 818         US_DEBUGP("-- %s\n", __FUNCTION__);
 819
 820         /* Tell the control thread to exit.  The SCSI host must
 821          * already have been removed so it won't try to queue
 822          * any more commands.
 823          */
 824         US_DEBUGP("-- sending exit command to thread\n");
 825         set_bit(US_FLIDX_DISCONNECTING, &us->flags);
 826         up(&us->sema);
 827
 828         /* Call the destructor routine, if it exists */
 829         if (us->extra_destructor) {
 830                 US_DEBUGP("-- calling extra_destructor()\n");
 831                 us->extra_destructor(us->extra);
 832         }
 833
 834         /* Free the extra data and the URB */
 835         kfree(us->extra);
 836         usb_free_urb(us->current_urb);
 837 }
 838
 839 /* Dissociate from the USB device */
 840 static void dissociate_dev(struct us_data *us)
 841 {
 842         US_DEBUGP("-- %s\n", __FUNCTION__);
 843
 844         kfree(us->sensebuf);
 845
 846         /* Free the device-related DMA-mapped buffers */
 847         if (us->cr)
 848                 usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
 849                                 us->cr_dma);
 850         if (us->iobuf)
 851                 usb_buffer_free(us->pusb_dev, US_IOBUF_SIZE, us->iobuf,
 852                                 us->iobuf_dma);
 853
 854         /* Remove our private data from the interface */
 855         usb_set_intfdata(us->pusb_intf, NULL);
 856 }
 857
 858 /* First stage of disconnect processing: stop all commands and remove
 859  * the host */
 860 static void quiesce_and_remove_host(struct us_data *us)
 861 {
 862         struct Scsi_Host *host = us_to_host(us);
 863
 864         /* Prevent new USB transfers, stop the current command, and
 865          * interrupt a SCSI-scan or device-reset delay */
 866         scsi_lock(host);
 867         set_bit(US_FLIDX_DISCONNECTING, &us->flags);
 868         scsi_unlock(host);
 869         usb_stor_stop_transport(us);
 870         wake_up(&us->delay_wait);
 871
 872         /* It doesn't matter if the SCSI-scanning thread is still running.
 873          * The thread will exit when it sees the DISCONNECTING flag. */
 874
 875         /* queuecommand won't accept any new commands and the control
 876          * thread won't execute a previously-queued command.  If there
 877          * is such a command pending, complete it with an error. */
 878         mutex_lock(&us->dev_mutex);
 879         if (us->srb) {
 880                 us->srb->result = DID_NO_CONNECT << 16;
 881                 scsi_lock(host);
 882                 us->srb->scsi_done(us->srb);
 883                 us->srb = NULL;
 884                 scsi_unlock(host);
 885         }
 886         mutex_unlock(&us->dev_mutex);
 887
 888         /* Now we own no commands so it's safe to remove the SCSI host */
 889         scsi_remove_host(host);
 890 }
 891
 892 /* Second stage of disconnect processing: deallocate all resources */
 893 static void release_everything(struct us_data *us)
 894 {
 895         usb_stor_release_resources(us);
 896         dissociate_dev(us);
 897
 898         /* Drop our reference to the host; the SCSI core will free it
 899          * (and "us" along with it) when the refcount becomes 0. */
 900         scsi_host_put(us_to_host(us));
 901 }
 902
 903 /* Thread to carry out delayed SCSI-device scanning */
 904 static int usb_stor_scan_thread(void * __us)
 905 {
 906         struct us_data *us = (struct us_data *)__us;
 907
 908         printk(KERN_DEBUG
 909                 "usb-storage: device found at %d\n", us->pusb_dev->devnum);
 910
 911         /* Wait for the timeout to expire or for a disconnect */
 912         if (delay_use > 0) {
 913                 printk(KERN_DEBUG "usb-storage: waiting for device "
 914                                 "to settle before scanning\n");
 915 retry:
 916                 wait_event_interruptible_timeout(us->delay_wait,
 917                                 test_bit(US_FLIDX_DISCONNECTING, &us->flags),
 918                                 delay_use * HZ);
 919                 if (try_to_freeze())
 920                         goto retry;
 921         }
 922
 923         /* If the device is still connected, perform the scanning */
 924         if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
 925
 926                 /* For bulk-only devices, determine the max LUN value */
 927                 if (us->protocol == US_PR_BULK &&
 928                                 !(us->flags & US_FL_SINGLE_LUN)) {
 929                         mutex_lock(&us->dev_mutex);
 930                         us->max_lun = usb_stor_Bulk_max_lun(us);
 931                         mutex_unlock(&us->dev_mutex);
 932                 }
 933                 scsi_scan_host(us_to_host(us));
 934                 printk(KERN_DEBUG "usb-storage: device scan complete\n");
 935
 936                 /* Should we unbind if no devices were detected? */
 937         }
 938
 939         scsi_host_put(us_to_host(us));
 940         complete_and_exit(&threads_gone, 0);
 941 }
 942
 943
 944 /* Probe to see if we can drive a newly-connected USB device */
 945 static int storage_probe(struct usb_interface *intf,
 946                          const struct usb_device_id *id)
 947 {
 948         struct Scsi_Host *host;
 949         struct us_data *us;
 950         int result;
 951         struct task_struct *th;
 952
 953         if (usb_usual_check_type(id, USB_US_TYPE_STOR))
 954                 return -ENXIO;
 955
 956         US_DEBUGP("USB Mass Storage device detected\n");
 957
 958         /*
 959          * Ask the SCSI layer to allocate a host structure, with extra
 960          * space at the end for our private us_data structure.
 961          */
 962         host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us));
 963         if (!host) {
 964                 printk(KERN_WARNING USB_STORAGE
 965                         "Unable to allocate the scsi host\n");
 966                 return -ENOMEM;
 967         }
 968
 969         us = host_to_us(host);
 970         memset(us, 0, sizeof(struct us_data));
 971         mutex_init(&(us->dev_mutex));
 972         init_MUTEX_LOCKED(&(us->sema));
 973         init_completion(&(us->notify));
 974         init_waitqueue_head(&us->delay_wait);
 975
 976         /* Associate the us_data structure with the USB device */
 977         result = associate_dev(us, intf);
 978         if (result)
 979                 goto BadDevice;
 980
 981         /*
 982          * Get the unusual_devs entries and the descriptors
 983          *
 984          * id_index is calculated in the declaration to be the index number
 985          * of the match from the usb_device_id table, so we can find the
 986          * corresponding entry in the private table.
 987          */
 988         result = get_device_info(us, id);
 989         if (result)
 990                 goto BadDevice;
 991
 992         /* Get the transport, protocol, and pipe settings */
 993         result = get_transport(us);
 994         if (result)
 995                 goto BadDevice;
 996         result = get_protocol(us);
 997         if (result)
 998                 goto BadDevice;
 999         result = get_pipes(us);
1000         if (result)
1001                 goto BadDevice;
1002
1003         /* Acquire all the other resources and add the host */
1004         result = usb_stor_acquire_resources(us);
1005         if (result)
1006                 goto BadDevice;
1007         result = scsi_add_host(host, &intf->dev);
1008         if (result) {
1009                 printk(KERN_WARNING USB_STORAGE
1010                         "Unable to add the scsi host\n");
1011                 goto BadDevice;
1012         }
1013
1014         /* Start up the thread for delayed SCSI-device scanning */
1015         th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
1016         if (IS_ERR(th)) {
1017                 printk(KERN_WARNING USB_STORAGE
1018                        "Unable to start the device-scanning thread\n");
1019                 quiesce_and_remove_host(us);
1020                 result = PTR_ERR(th);
1021                 goto BadDevice;
1022         }
1023
1024         /* Take a reference to the host for the scanning thread and
1025          * count it among all the threads we have launched.  Then
1026          * start it up. */
1027         scsi_host_get(us_to_host(us));
1028         atomic_inc(&total_threads);
1029         wake_up_process(th);
1030
1031         return 0;
1032
1033         /* We come here if there are any problems */
1034 BadDevice:
1035         US_DEBUGP("storage_probe() failed\n");
1036         release_everything(us);
1037         return result;
1038 }
1039
1040 /* Handle a disconnect event from the USB core */
1041 static void storage_disconnect(struct usb_interface *intf)
1042 {
1043         struct us_data *us = usb_get_intfdata(intf);
1044
1045         US_DEBUGP("storage_disconnect() called\n");
1046         quiesce_and_remove_host(us);
1047         release_everything(us);
1048 }
1049
1050 /***********************************************************************
1051  * Initialization and registration
1052  ***********************************************************************/
1053
1054 static struct usb_driver usb_storage_driver = {
1055         .name =         "usb-storage",
1056         .probe =        storage_probe,
1057         .disconnect =   storage_disconnect,
1058 #ifdef CONFIG_PM
1059         .suspend =      storage_suspend,
1060         .resume =       storage_resume,
1061 #endif
1062         .pre_reset =    storage_pre_reset,
1063         .post_reset =   storage_post_reset,
1064         .id_table =     storage_usb_ids,
1065 };
1066
1067 static int __init usb_stor_init(void)
1068 {
1069         int retval;
1070         printk(KERN_INFO "Initializing USB Mass Storage driver...\n");
1071
1072         /* register the driver, return usb_register return code if error */
1073         retval = usb_register(&usb_storage_driver);
1074         if (retval == 0) {
1075                 printk(KERN_INFO "USB Mass Storage support registered.\n");
1076                 usb_usual_set_present(USB_US_TYPE_STOR);
1077         }
1078         return retval;
1079 }
1080
1081 static void __exit usb_stor_exit(void)
1082 {
1083         US_DEBUGP("usb_stor_exit() called\n");
1084
1085         /* Deregister the driver
1086          * This will cause disconnect() to be called for each
1087          * attached unit
1088          */
1089         US_DEBUGP("-- calling usb_deregister()\n");
1090         usb_deregister(&usb_storage_driver) ;
1091
1092         /* Don't return until all of our control and scanning threads
1093          * have exited.  Since each thread signals threads_gone as its
1094          * last act, we have to call wait_for_completion the right number
1095          * of times.
1096          */
1097         while (atomic_read(&total_threads) > 0) {
1098                 wait_for_completion(&threads_gone);
1099                 atomic_dec(&total_threads);
1100         }
1101
1102         usb_usual_clear_present(USB_US_TYPE_STOR);
1103 }
1104
1105 module_init(usb_stor_init);
1106 module_exit(usb_stor_exit);