git.oblomov.eu Git - linux-2.6/blob - drivers/mfd/sm501.c

   1 /* linux/drivers/mfd/sm501.c
   2  *
   3  * Copyright (C) 2006 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *      Vincent Sanders <vince@simtec.co.uk>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  *
  11  * SM501 MFD driver
  12 */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/module.h>
  16 #include <linux/delay.h>
  17 #include <linux/init.h>
  18 #include <linux/list.h>
  19 #include <linux/device.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/pci.h>
  22 #include <linux/gpio.h>
  23 #include <linux/i2c-gpio.h>
  24
  25 #include <linux/sm501.h>
  26 #include <linux/sm501-regs.h>
  27 #include <linux/serial_8250.h>
  28
  29 #include <asm/io.h>
  30
  31 struct sm501_device {
  32         struct list_head                list;
  33         struct platform_device          pdev;
  34 };
  35
  36 struct sm501_gpio;
  37
  38 struct sm501_gpio_chip {
  39         struct gpio_chip        gpio;
  40         struct sm501_gpio       *ourgpio;       /* to get back to parent. */
  41         void __iomem            *regbase;
  42 };
  43
  44 struct sm501_gpio {
  45         struct sm501_gpio_chip  low;
  46         struct sm501_gpio_chip  high;
  47         spinlock_t              lock;
  48
  49         unsigned int             registered : 1;
  50         void __iomem            *regs;
  51         struct resource         *regs_res;
  52 };
  53
  54 struct sm501_devdata {
  55         spinlock_t                       reg_lock;
  56         struct mutex                     clock_lock;
  57         struct list_head                 devices;
  58         struct sm501_gpio                gpio;
  59
  60         struct device                   *dev;
  61         struct resource                 *io_res;
  62         struct resource                 *mem_res;
  63         struct resource                 *regs_claim;
  64         struct sm501_platdata           *platdata;
  65
  66
  67         unsigned int                     in_suspend;
  68         unsigned long                    pm_misc;
  69
  70         int                              unit_power[20];
  71         unsigned int                     pdev_id;
  72         unsigned int                     irq;
  73         void __iomem                    *regs;
  74         unsigned int                     rev;
  75 };
  76
  77
  78 #define MHZ (1000 * 1000)
  79
  80 #ifdef DEBUG
  81 static const unsigned int div_tab[] = {
  82         [0]             = 1,
  83         [1]             = 2,
  84         [2]             = 4,
  85         [3]             = 8,
  86         [4]             = 16,
  87         [5]             = 32,
  88         [6]             = 64,
  89         [7]             = 128,
  90         [8]             = 3,
  91         [9]             = 6,
  92         [10]            = 12,
  93         [11]            = 24,
  94         [12]            = 48,
  95         [13]            = 96,
  96         [14]            = 192,
  97         [15]            = 384,
  98         [16]            = 5,
  99         [17]            = 10,
 100         [18]            = 20,
 101         [19]            = 40,
 102         [20]            = 80,
 103         [21]            = 160,
 104         [22]            = 320,
 105         [23]            = 604,
 106 };
 107
 108 static unsigned long decode_div(unsigned long pll2, unsigned long val,
 109                                 unsigned int lshft, unsigned int selbit,
 110                                 unsigned long mask)
 111 {
 112         if (val & selbit)
 113                 pll2 = 288 * MHZ;
 114
 115         return pll2 / div_tab[(val >> lshft) & mask];
 116 }
 117
 118 #define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
 119
 120 /* sm501_dump_clk
 121  *
 122  * Print out the current clock configuration for the device
 123 */
 124
 125 static void sm501_dump_clk(struct sm501_devdata *sm)
 126 {
 127         unsigned long misct = readl(sm->regs + SM501_MISC_TIMING);
 128         unsigned long pm0 = readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
 129         unsigned long pm1 = readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
 130         unsigned long pmc = readl(sm->regs + SM501_POWER_MODE_CONTROL);
 131         unsigned long sdclk0, sdclk1;
 132         unsigned long pll2 = 0;
 133
 134         switch (misct & 0x30) {
 135         case 0x00:
 136                 pll2 = 336 * MHZ;
 137                 break;
 138         case 0x10:
 139                 pll2 = 288 * MHZ;
 140                 break;
 141         case 0x20:
 142                 pll2 = 240 * MHZ;
 143                 break;
 144         case 0x30:
 145                 pll2 = 192 * MHZ;
 146                 break;
 147         }
 148
 149         sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
 150         sdclk0 /= div_tab[((misct >> 8) & 0xf)];
 151
 152         sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
 153         sdclk1 /= div_tab[((misct >> 16) & 0xf)];
 154
 155         dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
 156                 misct, pm0, pm1);
 157
 158         dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
 159                 fmt_freq(pll2), sdclk0, sdclk1);
 160
 161         dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
 162
 163         dev_dbg(sm->dev, "PM0[%c]: "
 164                  "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
 165                  "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
 166                  (pmc & 3 ) == 0 ? '*' : '-',
 167                  fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
 168                  fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
 169                  fmt_freq(decode_div(pll2, pm0, 8,  1<<12, 15)),
 170                  fmt_freq(decode_div(pll2, pm0, 0,  1<<4,  15)));
 171
 172         dev_dbg(sm->dev, "PM1[%c]: "
 173                 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
 174                 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
 175                 (pmc & 3 ) == 1 ? '*' : '-',
 176                 fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
 177                 fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
 178                 fmt_freq(decode_div(pll2, pm1, 8,  1<<12, 15)),
 179                 fmt_freq(decode_div(pll2, pm1, 0,  1<<4,  15)));
 180 }
 181
 182 static void sm501_dump_regs(struct sm501_devdata *sm)
 183 {
 184         void __iomem *regs = sm->regs;
 185
 186         dev_info(sm->dev, "System Control   %08x\n",
 187                         readl(regs + SM501_SYSTEM_CONTROL));
 188         dev_info(sm->dev, "Misc Control     %08x\n",
 189                         readl(regs + SM501_MISC_CONTROL));
 190         dev_info(sm->dev, "GPIO Control Low %08x\n",
 191                         readl(regs + SM501_GPIO31_0_CONTROL));
 192         dev_info(sm->dev, "GPIO Control Hi  %08x\n",
 193                         readl(regs + SM501_GPIO63_32_CONTROL));
 194         dev_info(sm->dev, "DRAM Control     %08x\n",
 195                         readl(regs + SM501_DRAM_CONTROL));
 196         dev_info(sm->dev, "Arbitration Ctrl %08x\n",
 197                         readl(regs + SM501_ARBTRTN_CONTROL));
 198         dev_info(sm->dev, "Misc Timing      %08x\n",
 199                         readl(regs + SM501_MISC_TIMING));
 200 }
 201
 202 static void sm501_dump_gate(struct sm501_devdata *sm)
 203 {
 204         dev_info(sm->dev, "CurrentGate      %08x\n",
 205                         readl(sm->regs + SM501_CURRENT_GATE));
 206         dev_info(sm->dev, "CurrentClock     %08x\n",
 207                         readl(sm->regs + SM501_CURRENT_CLOCK));
 208         dev_info(sm->dev, "PowerModeControl %08x\n",
 209                         readl(sm->regs + SM501_POWER_MODE_CONTROL));
 210 }
 211
 212 #else
 213 static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
 214 static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
 215 static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
 216 #endif
 217
 218 /* sm501_sync_regs
 219  *
 220  * ensure the
 221 */
 222
 223 static void sm501_sync_regs(struct sm501_devdata *sm)
 224 {
 225         readl(sm->regs);
 226 }
 227
 228 static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
 229 {
 230         /* during suspend/resume, we are currently not allowed to sleep,
 231          * so change to using mdelay() instead of msleep() if we
 232          * are in one of these paths */
 233
 234         if (sm->in_suspend)
 235                 mdelay(delay);
 236         else
 237                 msleep(delay);
 238 }
 239
 240 /* sm501_misc_control
 241  *
 242  * alters the miscellaneous control parameters
 243 */
 244
 245 int sm501_misc_control(struct device *dev,
 246                        unsigned long set, unsigned long clear)
 247 {
 248         struct sm501_devdata *sm = dev_get_drvdata(dev);
 249         unsigned long misc;
 250         unsigned long save;
 251         unsigned long to;
 252
 253         spin_lock_irqsave(&sm->reg_lock, save);
 254
 255         misc = readl(sm->regs + SM501_MISC_CONTROL);
 256         to = (misc & ~clear) | set;
 257
 258         if (to != misc) {
 259                 writel(to, sm->regs + SM501_MISC_CONTROL);
 260                 sm501_sync_regs(sm);
 261
 262                 dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
 263         }
 264
 265         spin_unlock_irqrestore(&sm->reg_lock, save);
 266         return to;
 267 }
 268
 269 EXPORT_SYMBOL_GPL(sm501_misc_control);
 270
 271 /* sm501_modify_reg
 272  *
 273  * Modify a register in the SM501 which may be shared with other
 274  * drivers.
 275 */
 276
 277 unsigned long sm501_modify_reg(struct device *dev,
 278                                unsigned long reg,
 279                                unsigned long set,
 280                                unsigned long clear)
 281 {
 282         struct sm501_devdata *sm = dev_get_drvdata(dev);
 283         unsigned long data;
 284         unsigned long save;
 285
 286         spin_lock_irqsave(&sm->reg_lock, save);
 287
 288         data = readl(sm->regs + reg);
 289         data |= set;
 290         data &= ~clear;
 291
 292         writel(data, sm->regs + reg);
 293         sm501_sync_regs(sm);
 294
 295         spin_unlock_irqrestore(&sm->reg_lock, save);
 296
 297         return data;
 298 }
 299
 300 EXPORT_SYMBOL_GPL(sm501_modify_reg);
 301
 302 /* sm501_unit_power
 303  *
 304  * alters the power active gate to set specific units on or off
 305  */
 306
 307 int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
 308 {
 309         struct sm501_devdata *sm = dev_get_drvdata(dev);
 310         unsigned long mode;
 311         unsigned long gate;
 312         unsigned long clock;
 313
 314         mutex_lock(&sm->clock_lock);
 315
 316         mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
 317         gate = readl(sm->regs + SM501_CURRENT_GATE);
 318         clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 319
 320         mode &= 3;              /* get current power mode */
 321
 322         if (unit >= ARRAY_SIZE(sm->unit_power)) {
 323                 dev_err(dev, "%s: bad unit %d\n", __func__, unit);
 324                 goto already;
 325         }
 326
 327         dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
 328                 sm->unit_power[unit], to);
 329
 330         if (to == 0 && sm->unit_power[unit] == 0) {
 331                 dev_err(sm->dev, "unit %d is already shutdown\n", unit);
 332                 goto already;
 333         }
 334
 335         sm->unit_power[unit] += to ? 1 : -1;
 336         to = sm->unit_power[unit] ? 1 : 0;
 337
 338         if (to) {
 339                 if (gate & (1 << unit))
 340                         goto already;
 341                 gate |= (1 << unit);
 342         } else {
 343                 if (!(gate & (1 << unit)))
 344                         goto already;
 345                 gate &= ~(1 << unit);
 346         }
 347
 348         switch (mode) {
 349         case 1:
 350                 writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
 351                 writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
 352                 mode = 0;
 353                 break;
 354         case 2:
 355         case 0:
 356                 writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
 357                 writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
 358                 mode = 1;
 359                 break;
 360
 361         default:
 362                 return -1;
 363         }
 364
 365         writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
 366         sm501_sync_regs(sm);
 367
 368         dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
 369                 gate, clock, mode);
 370
 371         sm501_mdelay(sm, 16);
 372
 373  already:
 374         mutex_unlock(&sm->clock_lock);
 375         return gate;
 376 }
 377
 378 EXPORT_SYMBOL_GPL(sm501_unit_power);
 379
 380
 381 /* Perform a rounded division. */
 382 static long sm501fb_round_div(long num, long denom)
 383 {
 384         /* n / d + 1 / 2 = (2n + d) / 2d */
 385         return (2 * num + denom) / (2 * denom);
 386 }
 387
 388 /* clock value structure. */
 389 struct sm501_clock {
 390         unsigned long mclk;
 391         int divider;
 392         int shift;
 393         unsigned int m, n, k;
 394 };
 395
 396 /* sm501_calc_clock
 397  *
 398  * Calculates the nearest discrete clock frequency that
 399  * can be achieved with the specified input clock.
 400  *   the maximum divisor is 3 or 5
 401  */
 402
 403 static int sm501_calc_clock(unsigned long freq,
 404                             struct sm501_clock *clock,
 405                             int max_div,
 406                             unsigned long mclk,
 407                             long *best_diff)
 408 {
 409         int ret = 0;
 410         int divider;
 411         int shift;
 412         long diff;
 413
 414         /* try dividers 1 and 3 for CRT and for panel,
 415            try divider 5 for panel only.*/
 416
 417         for (divider = 1; divider <= max_div; divider += 2) {
 418                 /* try all 8 shift values.*/
 419                 for (shift = 0; shift < 8; shift++) {
 420                         /* Calculate difference to requested clock */
 421                         diff = sm501fb_round_div(mclk, divider << shift) - freq;
 422                         if (diff < 0)
 423                                 diff = -diff;
 424
 425                         /* If it is less than the current, use it */
 426                         if (diff < *best_diff) {
 427                                 *best_diff = diff;
 428
 429                                 clock->mclk = mclk;
 430                                 clock->divider = divider;
 431                                 clock->shift = shift;
 432                                 ret = 1;
 433                         }
 434                 }
 435         }
 436
 437         return ret;
 438 }
 439
 440 /* sm501_calc_pll
 441  *
 442  * Calculates the nearest discrete clock frequency that can be
 443  * achieved using the programmable PLL.
 444  *   the maximum divisor is 3 or 5
 445  */
 446
 447 static unsigned long sm501_calc_pll(unsigned long freq,
 448                                         struct sm501_clock *clock,
 449                                         int max_div)
 450 {
 451         unsigned long mclk;
 452         unsigned int m, n, k;
 453         long best_diff = 999999999;
 454
 455         /*
 456          * The SM502 datasheet doesn't specify the min/max values for M and N.
 457          * N = 1 at least doesn't work in practice.
 458          */
 459         for (m = 2; m <= 255; m++) {
 460                 for (n = 2; n <= 127; n++) {
 461                         for (k = 0; k <= 1; k++) {
 462                                 mclk = (24000000UL * m / n) >> k;
 463
 464                                 if (sm501_calc_clock(freq, clock, max_div,
 465                                                      mclk, &best_diff)) {
 466                                         clock->m = m;
 467                                         clock->n = n;
 468                                         clock->k = k;
 469                                 }
 470                         }
 471                 }
 472         }
 473
 474         /* Return best clock. */
 475         return clock->mclk / (clock->divider << clock->shift);
 476 }
 477
 478 /* sm501_select_clock
 479  *
 480  * Calculates the nearest discrete clock frequency that can be
 481  * achieved using the 288MHz and 336MHz PLLs.
 482  *   the maximum divisor is 3 or 5
 483  */
 484
 485 static unsigned long sm501_select_clock(unsigned long freq,
 486                                         struct sm501_clock *clock,
 487                                         int max_div)
 488 {
 489         unsigned long mclk;
 490         long best_diff = 999999999;
 491
 492         /* Try 288MHz and 336MHz clocks. */
 493         for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
 494                 sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
 495         }
 496
 497         /* Return best clock. */
 498         return clock->mclk / (clock->divider << clock->shift);
 499 }
 500
 501 /* sm501_set_clock
 502  *
 503  * set one of the four clock sources to the closest available frequency to
 504  *  the one specified
 505 */
 506
 507 unsigned long sm501_set_clock(struct device *dev,
 508                               int clksrc,
 509                               unsigned long req_freq)
 510 {
 511         struct sm501_devdata *sm = dev_get_drvdata(dev);
 512         unsigned long mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
 513         unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
 514         unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 515         unsigned char reg;
 516         unsigned int pll_reg = 0;
 517         unsigned long sm501_freq; /* the actual frequency acheived */
 518
 519         struct sm501_clock to;
 520
 521         /* find achivable discrete frequency and setup register value
 522          * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
 523          * has an extra bit for the divider */
 524
 525         switch (clksrc) {
 526         case SM501_CLOCK_P2XCLK:
 527                 /* This clock is divided in half so to achive the
 528                  * requested frequency the value must be multiplied by
 529                  * 2. This clock also has an additional pre divisor */
 530
 531                 if (sm->rev >= 0xC0) {
 532                         /* SM502 -> use the programmable PLL */
 533                         sm501_freq = (sm501_calc_pll(2 * req_freq,
 534                                                      &to, 5) / 2);
 535                         reg = to.shift & 0x07;/* bottom 3 bits are shift */
 536                         if (to.divider == 3)
 537                                 reg |= 0x08; /* /3 divider required */
 538                         else if (to.divider == 5)
 539                                 reg |= 0x10; /* /5 divider required */
 540                         reg |= 0x40; /* select the programmable PLL */
 541                         pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
 542                 } else {
 543                         sm501_freq = (sm501_select_clock(2 * req_freq,
 544                                                          &to, 5) / 2);
 545                         reg = to.shift & 0x07;/* bottom 3 bits are shift */
 546                         if (to.divider == 3)
 547                                 reg |= 0x08; /* /3 divider required */
 548                         else if (to.divider == 5)
 549                                 reg |= 0x10; /* /5 divider required */
 550                         if (to.mclk != 288000000)
 551                                 reg |= 0x20; /* which mclk pll is source */
 552                 }
 553                 break;
 554
 555         case SM501_CLOCK_V2XCLK:
 556                 /* This clock is divided in half so to achive the
 557                  * requested frequency the value must be multiplied by 2. */
 558
 559                 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
 560                 reg=to.shift & 0x07;    /* bottom 3 bits are shift */
 561                 if (to.divider == 3)
 562                         reg |= 0x08;    /* /3 divider required */
 563                 if (to.mclk != 288000000)
 564                         reg |= 0x10;    /* which mclk pll is source */
 565                 break;
 566
 567         case SM501_CLOCK_MCLK:
 568         case SM501_CLOCK_M1XCLK:
 569                 /* These clocks are the same and not further divided */
 570
 571                 sm501_freq = sm501_select_clock( req_freq, &to, 3);
 572                 reg=to.shift & 0x07;    /* bottom 3 bits are shift */
 573                 if (to.divider == 3)
 574                         reg |= 0x08;    /* /3 divider required */
 575                 if (to.mclk != 288000000)
 576                         reg |= 0x10;    /* which mclk pll is source */
 577                 break;
 578
 579         default:
 580                 return 0; /* this is bad */
 581         }
 582
 583         mutex_lock(&sm->clock_lock);
 584
 585         mode = readl(sm->regs + SM501_POWER_MODE_CONTROL);
 586         gate = readl(sm->regs + SM501_CURRENT_GATE);
 587         clock = readl(sm->regs + SM501_CURRENT_CLOCK);
 588
 589         clock = clock & ~(0xFF << clksrc);
 590         clock |= reg<<clksrc;
 591
 592         mode &= 3;      /* find current mode */
 593
 594         switch (mode) {
 595         case 1:
 596                 writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
 597                 writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
 598                 mode = 0;
 599                 break;
 600         case 2:
 601         case 0:
 602                 writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
 603                 writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
 604                 mode = 1;
 605                 break;
 606
 607         default:
 608                 mutex_unlock(&sm->clock_lock);
 609                 return -1;
 610         }
 611
 612         writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
 613
 614         if (pll_reg)
 615                 writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
 616
 617         sm501_sync_regs(sm);
 618
 619         dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
 620                  gate, clock, mode);
 621
 622         sm501_mdelay(sm, 16);
 623         mutex_unlock(&sm->clock_lock);
 624
 625         sm501_dump_clk(sm);
 626
 627         return sm501_freq;
 628 }
 629
 630 EXPORT_SYMBOL_GPL(sm501_set_clock);
 631
 632 /* sm501_find_clock
 633  *
 634  * finds the closest available frequency for a given clock
 635 */
 636
 637 unsigned long sm501_find_clock(struct device *dev,
 638                                int clksrc,
 639                                unsigned long req_freq)
 640 {
 641         struct sm501_devdata *sm = dev_get_drvdata(dev);
 642         unsigned long sm501_freq; /* the frequency achiveable by the 501 */
 643         struct sm501_clock to;
 644
 645         switch (clksrc) {
 646         case SM501_CLOCK_P2XCLK:
 647                 if (sm->rev >= 0xC0) {
 648                         /* SM502 -> use the programmable PLL */
 649                         sm501_freq = (sm501_calc_pll(2 * req_freq,
 650                                                      &to, 5) / 2);
 651                 } else {
 652                         sm501_freq = (sm501_select_clock(2 * req_freq,
 653                                                          &to, 5) / 2);
 654                 }
 655                 break;
 656
 657         case SM501_CLOCK_V2XCLK:
 658                 sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
 659                 break;
 660
 661         case SM501_CLOCK_MCLK:
 662         case SM501_CLOCK_M1XCLK:
 663                 sm501_freq = sm501_select_clock(req_freq, &to, 3);
 664                 break;
 665
 666         default:
 667                 sm501_freq = 0;         /* error */
 668         }
 669
 670         return sm501_freq;
 671 }
 672
 673 EXPORT_SYMBOL_GPL(sm501_find_clock);
 674
 675 static struct sm501_device *to_sm_device(struct platform_device *pdev)
 676 {
 677         return container_of(pdev, struct sm501_device, pdev);
 678 }
 679
 680 /* sm501_device_release
 681  *
 682  * A release function for the platform devices we create to allow us to
 683  * free any items we allocated
 684 */
 685
 686 static void sm501_device_release(struct device *dev)
 687 {
 688         kfree(to_sm_device(to_platform_device(dev)));
 689 }
 690
 691 /* sm501_create_subdev
 692  *
 693  * Create a skeleton platform device with resources for passing to a
 694  * sub-driver
 695 */
 696
 697 static struct platform_device *
 698 sm501_create_subdev(struct sm501_devdata *sm, char *name,
 699                     unsigned int res_count, unsigned int platform_data_size)
 700 {
 701         struct sm501_device *smdev;
 702
 703         smdev = kzalloc(sizeof(struct sm501_device) +
 704                         (sizeof(struct resource) * res_count) +
 705                         platform_data_size, GFP_KERNEL);
 706         if (!smdev)
 707                 return NULL;
 708
 709         smdev->pdev.dev.release = sm501_device_release;
 710
 711         smdev->pdev.name = name;
 712         smdev->pdev.id = sm->pdev_id;
 713         smdev->pdev.dev.parent = sm->dev;
 714
 715         if (res_count) {
 716                 smdev->pdev.resource = (struct resource *)(smdev+1);
 717                 smdev->pdev.num_resources = res_count;
 718         }
 719         if (platform_data_size)
 720                 smdev->pdev.dev.platform_data = (void *)(smdev+1);
 721
 722         return &smdev->pdev;
 723 }
 724
 725 /* sm501_register_device
 726  *
 727  * Register a platform device created with sm501_create_subdev()
 728 */
 729
 730 static int sm501_register_device(struct sm501_devdata *sm,
 731                                  struct platform_device *pdev)
 732 {
 733         struct sm501_device *smdev = to_sm_device(pdev);
 734         int ptr;
 735         int ret;
 736
 737         for (ptr = 0; ptr < pdev->num_resources; ptr++) {
 738                 printk("%s[%d] flags %08lx: %08llx..%08llx\n",
 739                        pdev->name, ptr,
 740                        pdev->resource[ptr].flags,
 741                        (unsigned long long)pdev->resource[ptr].start,
 742                        (unsigned long long)pdev->resource[ptr].end);
 743         }
 744
 745         ret = platform_device_register(pdev);
 746
 747         if (ret >= 0) {
 748                 dev_dbg(sm->dev, "registered %s\n", pdev->name);
 749                 list_add_tail(&smdev->list, &sm->devices);
 750         } else
 751                 dev_err(sm->dev, "error registering %s (%d)\n",
 752                         pdev->name, ret);
 753
 754         return ret;
 755 }
 756
 757 /* sm501_create_subio
 758  *
 759  * Fill in an IO resource for a sub device
 760 */
 761
 762 static void sm501_create_subio(struct sm501_devdata *sm,
 763                                struct resource *res,
 764                                resource_size_t offs,
 765                                resource_size_t size)
 766 {
 767         res->flags = IORESOURCE_MEM;
 768         res->parent = sm->io_res;
 769         res->start = sm->io_res->start + offs;
 770         res->end = res->start + size - 1;
 771 }
 772
 773 /* sm501_create_mem
 774  *
 775  * Fill in an MEM resource for a sub device
 776 */
 777
 778 static void sm501_create_mem(struct sm501_devdata *sm,
 779                              struct resource *res,
 780                              resource_size_t *offs,
 781                              resource_size_t size)
 782 {
 783         *offs -= size;          /* adjust memory size */
 784
 785         res->flags = IORESOURCE_MEM;
 786         res->parent = sm->mem_res;
 787         res->start = sm->mem_res->start + *offs;
 788         res->end = res->start + size - 1;
 789 }
 790
 791 /* sm501_create_irq
 792  *
 793  * Fill in an IRQ resource for a sub device
 794 */
 795
 796 static void sm501_create_irq(struct sm501_devdata *sm,
 797                              struct resource *res)
 798 {
 799         res->flags = IORESOURCE_IRQ;
 800         res->parent = NULL;
 801         res->start = res->end = sm->irq;
 802 }
 803
 804 static int sm501_register_usbhost(struct sm501_devdata *sm,
 805                                   resource_size_t *mem_avail)
 806 {
 807         struct platform_device *pdev;
 808
 809         pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
 810         if (!pdev)
 811                 return -ENOMEM;
 812
 813         sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
 814         sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
 815         sm501_create_irq(sm, &pdev->resource[2]);
 816
 817         return sm501_register_device(sm, pdev);
 818 }
 819
 820 static void sm501_setup_uart_data(struct sm501_devdata *sm,
 821                                   struct plat_serial8250_port *uart_data,
 822                                   unsigned int offset)
 823 {
 824         uart_data->membase = sm->regs + offset;
 825         uart_data->mapbase = sm->io_res->start + offset;
 826         uart_data->iotype = UPIO_MEM;
 827         uart_data->irq = sm->irq;
 828         uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 829         uart_data->regshift = 2;
 830         uart_data->uartclk = (9600 * 16);
 831 }
 832
 833 static int sm501_register_uart(struct sm501_devdata *sm, int devices)
 834 {
 835         struct platform_device *pdev;
 836         struct plat_serial8250_port *uart_data;
 837
 838         pdev = sm501_create_subdev(sm, "serial8250", 0,
 839                                    sizeof(struct plat_serial8250_port) * 3);
 840         if (!pdev)
 841                 return -ENOMEM;
 842
 843         uart_data = pdev->dev.platform_data;
 844
 845         if (devices & SM501_USE_UART0) {
 846                 sm501_setup_uart_data(sm, uart_data++, 0x30000);
 847                 sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
 848                 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
 849                 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
 850         }
 851         if (devices & SM501_USE_UART1) {
 852                 sm501_setup_uart_data(sm, uart_data++, 0x30020);
 853                 sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
 854                 sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
 855                 sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
 856         }
 857
 858         pdev->id = PLAT8250_DEV_SM501;
 859
 860         return sm501_register_device(sm, pdev);
 861 }
 862
 863 static int sm501_register_display(struct sm501_devdata *sm,
 864                                   resource_size_t *mem_avail)
 865 {
 866         struct platform_device *pdev;
 867
 868         pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
 869         if (!pdev)
 870                 return -ENOMEM;
 871
 872         sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
 873         sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
 874         sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
 875         sm501_create_irq(sm, &pdev->resource[3]);
 876
 877         return sm501_register_device(sm, pdev);
 878 }
 879
 880 #ifdef CONFIG_MFD_SM501_GPIO
 881
 882 static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc)
 883 {
 884         return container_of(gc, struct sm501_gpio_chip, gpio);
 885 }
 886
 887 static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
 888 {
 889         return container_of(gpio, struct sm501_devdata, gpio);
 890 }
 891
 892 static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
 893
 894 {
 895         struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
 896         unsigned long result;
 897
 898         result = readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
 899         result >>= offset;
 900
 901         return result & 1UL;
 902 }
 903
 904 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 905
 906 {
 907         struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
 908         struct sm501_gpio *smgpio = smchip->ourgpio;
 909         unsigned long bit = 1 << offset;
 910         void __iomem *regs = smchip->regbase;
 911         unsigned long save;
 912         unsigned long val;
 913
 914         dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
 915                 __func__, chip, offset);
 916
 917         spin_lock_irqsave(&smgpio->lock, save);
 918
 919         val = readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
 920         if (value)
 921                 val |= bit;
 922         writel(val, regs);
 923
 924         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 925         spin_unlock_irqrestore(&smgpio->lock, save);
 926 }
 927
 928 static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
 929 {
 930         struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
 931         struct sm501_gpio *smgpio = smchip->ourgpio;
 932         void __iomem *regs = smchip->regbase;
 933         unsigned long bit = 1 << offset;
 934         unsigned long save;
 935         unsigned long ddr;
 936
 937         dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
 938                  __func__, chip, offset);
 939
 940         spin_lock_irqsave(&smgpio->lock, save);
 941
 942         ddr = readl(regs + SM501_GPIO_DDR_LOW);
 943         writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
 944
 945         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 946         spin_unlock_irqrestore(&smgpio->lock, save);
 947
 948         return 0;
 949 }
 950
 951 static int sm501_gpio_output(struct gpio_chip *chip,
 952                              unsigned offset, int value)
 953 {
 954         struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
 955         struct sm501_gpio *smgpio = smchip->ourgpio;
 956         unsigned long bit = 1 << offset;
 957         void __iomem *regs = smchip->regbase;
 958         unsigned long save;
 959         unsigned long val;
 960         unsigned long ddr;
 961
 962         dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
 963                 __func__, chip, offset, value);
 964
 965         spin_lock_irqsave(&smgpio->lock, save);
 966
 967         val = readl(regs + SM501_GPIO_DATA_LOW);
 968         if (value)
 969                 val |= bit;
 970         else
 971                 val &= ~bit;
 972         writel(val, regs);
 973
 974         ddr = readl(regs + SM501_GPIO_DDR_LOW);
 975         writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
 976
 977         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 978         writel(val, regs + SM501_GPIO_DATA_LOW);
 979
 980         sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 981         spin_unlock_irqrestore(&smgpio->lock, save);
 982
 983         return 0;
 984 }
 985
 986 static struct gpio_chip gpio_chip_template = {
 987         .ngpio                  = 32,
 988         .direction_input        = sm501_gpio_input,
 989         .direction_output       = sm501_gpio_output,
 990         .set                    = sm501_gpio_set,
 991         .get                    = sm501_gpio_get,
 992 };
 993
 994 static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 995                                               struct sm501_gpio *gpio,
 996                                               struct sm501_gpio_chip *chip)
 997 {
 998         struct sm501_platdata *pdata = sm->platdata;
 999         struct gpio_chip *gchip = &chip->gpio;
1000         int base = pdata->gpio_base;
1001
1002         chip->gpio = gpio_chip_template;
1003
1004         if (chip == &gpio->high) {
1005                 if (base > 0)
1006                         base += 32;
1007                 chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
1008                 gchip->label  = "SM501-HIGH";
1009         } else {
1010                 chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
1011                 gchip->label  = "SM501-LOW";
1012         }
1013
1014         gchip->base   = base;
1015         chip->ourgpio = gpio;
1016
1017         return gpiochip_add(gchip);
1018 }
1019
1020 static int sm501_register_gpio(struct sm501_devdata *sm)
1021 {
1022         struct sm501_gpio *gpio = &sm->gpio;
1023         resource_size_t iobase = sm->io_res->start + SM501_GPIO;
1024         int ret;
1025         int tmp;
1026
1027         dev_dbg(sm->dev, "registering gpio block %08llx\n",
1028                 (unsigned long long)iobase);
1029
1030         spin_lock_init(&gpio->lock);
1031
1032         gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
1033         if (gpio->regs_res == NULL) {
1034                 dev_err(sm->dev, "gpio: failed to request region\n");
1035                 return -ENXIO;
1036         }
1037
1038         gpio->regs = ioremap(iobase, 0x20);
1039         if (gpio->regs == NULL) {
1040                 dev_err(sm->dev, "gpio: failed to remap registers\n");
1041                 ret = -ENXIO;
1042                 goto err_claimed;
1043         }
1044
1045         /* Register both our chips. */
1046
1047         ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
1048         if (ret) {
1049                 dev_err(sm->dev, "failed to add low chip\n");
1050                 goto err_mapped;
1051         }
1052
1053         ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
1054         if (ret) {
1055                 dev_err(sm->dev, "failed to add high chip\n");
1056                 goto err_low_chip;
1057         }
1058
1059         gpio->registered = 1;
1060
1061         return 0;
1062
1063  err_low_chip:
1064         tmp = gpiochip_remove(&gpio->low.gpio);
1065         if (tmp) {
1066                 dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
1067                 return ret;
1068         }
1069
1070  err_mapped:
1071         iounmap(gpio->regs);
1072
1073  err_claimed:
1074         release_resource(gpio->regs_res);
1075         kfree(gpio->regs_res);
1076
1077         return ret;
1078 }
1079
1080 static void sm501_gpio_remove(struct sm501_devdata *sm)
1081 {
1082         struct sm501_gpio *gpio = &sm->gpio;
1083         int ret;
1084
1085         ret = gpiochip_remove(&gpio->low.gpio);
1086         if (ret)
1087                 dev_err(sm->dev, "cannot remove low chip, cannot tidy up\n");
1088
1089         ret = gpiochip_remove(&gpio->high.gpio);
1090         if (ret)
1091                 dev_err(sm->dev, "cannot remove high chip, cannot tidy up\n");
1092
1093         iounmap(gpio->regs);
1094         release_resource(gpio->regs_res);
1095         kfree(gpio->regs_res);
1096 }
1097
1098 static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
1099 {
1100         struct sm501_gpio *gpio = &sm->gpio;
1101         return pin + (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
1102 }
1103 #else
1104 static inline int sm501_register_gpio(struct sm501_devdata *sm)
1105 {
1106         return 0;
1107 }
1108
1109 static inline void sm501_gpio_remove(struct sm501_devdata *sm)
1110 {
1111 }
1112
1113 static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
1114 {
1115         return -1;
1116 }
1117 #endif
1118
1119 static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
1120                                             struct sm501_platdata_gpio_i2c *iic)
1121 {
1122         struct i2c_gpio_platform_data *icd;
1123         struct platform_device *pdev;
1124
1125         pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
1126                                    sizeof(struct i2c_gpio_platform_data));
1127         if (!pdev)
1128                 return -ENOMEM;
1129
1130         icd = pdev->dev.platform_data;
1131
1132         /* We keep the pin_sda and pin_scl fields relative in case the
1133          * same platform data is passed to >1 SM501.
1134          */
1135
1136         icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda);
1137         icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl);
1138         icd->timeout = iic->timeout;
1139         icd->udelay = iic->udelay;
1140
1141         /* note, we can't use either of the pin numbers, as the i2c-gpio
1142          * driver uses the platform.id field to generate the bus number
1143          * to register with the i2c core; The i2c core doesn't have enough
1144          * entries to deal with anything we currently use.
1145         */
1146
1147         pdev->id = iic->bus_num;
1148
1149         dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n",
1150                  iic->bus_num,
1151                  icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl);
1152
1153         return sm501_register_device(sm, pdev);
1154 }
1155
1156 static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
1157                                    struct sm501_platdata *pdata)
1158 {
1159         struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
1160         int index;
1161         int ret;
1162
1163         for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
1164                 ret = sm501_register_gpio_i2c_instance(sm, iic);
1165                 if (ret < 0)
1166                         return ret;
1167         }
1168
1169         return 0;
1170 }
1171
1172 /* sm501_dbg_regs
1173  *
1174  * Debug attribute to attach to parent device to show core registers
1175 */
1176
1177 static ssize_t sm501_dbg_regs(struct device *dev,
1178                               struct device_attribute *attr, char *buff)
1179 {
1180         struct sm501_devdata *sm = dev_get_drvdata(dev) ;
1181         unsigned int reg;
1182         char *ptr = buff;
1183         int ret;
1184
1185         for (reg = 0x00; reg < 0x70; reg += 4) {
1186                 ret = sprintf(ptr, "%08x = %08x\n",
1187                               reg, readl(sm->regs + reg));
1188                 ptr += ret;
1189         }
1190
1191         return ptr - buff;
1192 }
1193
1194
1195 static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
1196
1197 /* sm501_init_reg
1198  *
1199  * Helper function for the init code to setup a register
1200  *
1201  * clear the bits which are set in r->mask, and then set
1202  * the bits set in r->set.
1203 */
1204
1205 static inline void sm501_init_reg(struct sm501_devdata *sm,
1206                                   unsigned long reg,
1207                                   struct sm501_reg_init *r)
1208 {
1209         unsigned long tmp;
1210
1211         tmp = readl(sm->regs + reg);
1212         tmp &= ~r->mask;
1213         tmp |= r->set;
1214         writel(tmp, sm->regs + reg);
1215 }
1216
1217 /* sm501_init_regs
1218  *
1219  * Setup core register values
1220 */
1221
1222 static void sm501_init_regs(struct sm501_devdata *sm,
1223                             struct sm501_initdata *init)
1224 {
1225         sm501_misc_control(sm->dev,
1226                            init->misc_control.set,
1227                            init->misc_control.mask);
1228
1229         sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
1230         sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
1231         sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
1232
1233         if (init->m1xclk) {
1234                 dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
1235                 sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
1236         }
1237
1238         if (init->mclk) {
1239                 dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
1240                 sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
1241         }
1242
1243 }
1244
1245 /* Check the PLL sources for the M1CLK and M1XCLK
1246  *
1247  * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
1248  * there is a risk (see errata AB-5) that the SM501 will cease proper
1249  * function. If this happens, then it is likely the SM501 will
1250  * hang the system.
1251 */
1252
1253 static int sm501_check_clocks(struct sm501_devdata *sm)
1254 {
1255         unsigned long pwrmode = readl(sm->regs + SM501_CURRENT_CLOCK);
1256         unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
1257         unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
1258
1259         return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
1260 }
1261
1262 static unsigned int sm501_mem_local[] = {
1263         [0]     = 4*1024*1024,
1264         [1]     = 8*1024*1024,
1265         [2]     = 16*1024*1024,
1266         [3]     = 32*1024*1024,
1267         [4]     = 64*1024*1024,
1268         [5]     = 2*1024*1024,
1269 };
1270
1271 /* sm501_init_dev
1272  *
1273  * Common init code for an SM501
1274 */
1275
1276 static int sm501_init_dev(struct sm501_devdata *sm)
1277 {
1278         struct sm501_initdata *idata;
1279         struct sm501_platdata *pdata;
1280         resource_size_t mem_avail;
1281         unsigned long dramctrl;
1282         unsigned long devid;
1283         int ret;
1284
1285         mutex_init(&sm->clock_lock);
1286         spin_lock_init(&sm->reg_lock);
1287
1288         INIT_LIST_HEAD(&sm->devices);
1289
1290         devid = readl(sm->regs + SM501_DEVICEID);
1291
1292         if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
1293                 dev_err(sm->dev, "incorrect device id %08lx\n", devid);
1294                 return -EINVAL;
1295         }
1296
1297         /* disable irqs */
1298         writel(0, sm->regs + SM501_IRQ_MASK);
1299
1300         dramctrl = readl(sm->regs + SM501_DRAM_CONTROL);
1301         mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
1302
1303         dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
1304                  sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
1305
1306         sm->rev = devid & SM501_DEVICEID_REVMASK;
1307
1308         sm501_dump_gate(sm);
1309
1310         ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
1311         if (ret)
1312                 dev_err(sm->dev, "failed to create debug regs file\n");
1313
1314         sm501_dump_clk(sm);
1315
1316         /* check to see if we have some device initialisation */
1317
1318         pdata = sm->platdata;
1319         idata = pdata ? pdata->init : NULL;
1320
1321         if (idata) {
1322                 sm501_init_regs(sm, idata);
1323
1324                 if (idata->devices & SM501_USE_USB_HOST)
1325                         sm501_register_usbhost(sm, &mem_avail);
1326                 if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
1327                         sm501_register_uart(sm, idata->devices);
1328                 if (idata->devices & SM501_USE_GPIO)
1329                         sm501_register_gpio(sm);
1330         }
1331
1332         if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
1333                 if (!sm->gpio.registered)
1334                         dev_err(sm->dev, "no gpio registered for i2c gpio.\n");
1335                 else
1336                         sm501_register_gpio_i2c(sm, pdata);
1337         }
1338
1339         ret = sm501_check_clocks(sm);
1340         if (ret) {
1341                 dev_err(sm->dev, "M1X and M clocks sourced from different "
1342                                         "PLLs\n");
1343                 return -EINVAL;
1344         }
1345
1346         /* always create a framebuffer */
1347         sm501_register_display(sm, &mem_avail);
1348
1349         return 0;
1350 }
1351
1352 static int sm501_plat_probe(struct platform_device *dev)
1353 {
1354         struct sm501_devdata *sm;
1355         int err;
1356
1357         sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
1358         if (sm == NULL) {
1359                 dev_err(&dev->dev, "no memory for device data\n");
1360                 err = -ENOMEM;
1361                 goto err1;
1362         }
1363
1364         sm->dev = &dev->dev;
1365         sm->pdev_id = dev->id;
1366         sm->irq = platform_get_irq(dev, 0);
1367         sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
1368         sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
1369         sm->platdata = dev->dev.platform_data;
1370
1371         if (sm->irq < 0) {
1372                 dev_err(&dev->dev, "failed to get irq resource\n");
1373                 err = sm->irq;
1374                 goto err_res;
1375         }
1376
1377         if (sm->io_res == NULL || sm->mem_res == NULL) {
1378                 dev_err(&dev->dev, "failed to get IO resource\n");
1379                 err = -ENOENT;
1380                 goto err_res;
1381         }
1382
1383         sm->regs_claim = request_mem_region(sm->io_res->start,
1384                                             0x100, "sm501");
1385
1386         if (sm->regs_claim == NULL) {
1387                 dev_err(&dev->dev, "cannot claim registers\n");
1388                 err= -EBUSY;
1389                 goto err_res;
1390         }
1391
1392         platform_set_drvdata(dev, sm);
1393
1394         sm->regs = ioremap(sm->io_res->start,
1395                            (sm->io_res->end - sm->io_res->start) - 1);
1396
1397         if (sm->regs == NULL) {
1398                 dev_err(&dev->dev, "cannot remap registers\n");
1399                 err = -EIO;
1400                 goto err_claim;
1401         }
1402
1403         return sm501_init_dev(sm);
1404
1405  err_claim:
1406         release_resource(sm->regs_claim);
1407         kfree(sm->regs_claim);
1408  err_res:
1409         kfree(sm);
1410  err1:
1411         return err;
1412
1413 }
1414
1415 #ifdef CONFIG_PM
1416
1417 /* power management support */
1418
1419 static void sm501_set_power(struct sm501_devdata *sm, int on)
1420 {
1421         struct sm501_platdata *pd = sm->platdata;
1422
1423         if (pd == NULL)
1424                 return;
1425
1426         if (pd->get_power) {
1427                 if (pd->get_power(sm->dev) == on) {
1428                         dev_dbg(sm->dev, "is already %d\n", on);
1429                         return;
1430                 }
1431         }
1432
1433         if (pd->set_power) {
1434                 dev_dbg(sm->dev, "setting power to %d\n", on);
1435
1436                 pd->set_power(sm->dev, on);
1437                 sm501_mdelay(sm, 10);
1438         }
1439 }
1440
1441 static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
1442 {
1443         struct sm501_devdata *sm = platform_get_drvdata(pdev);
1444
1445         sm->in_suspend = 1;
1446         sm->pm_misc = readl(sm->regs + SM501_MISC_CONTROL);
1447
1448         sm501_dump_regs(sm);
1449
1450         if (sm->platdata) {
1451                 if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
1452                         sm501_set_power(sm, 0);
1453         }
1454
1455         return 0;
1456 }
1457
1458 static int sm501_plat_resume(struct platform_device *pdev)
1459 {
1460         struct sm501_devdata *sm = platform_get_drvdata(pdev);
1461
1462         sm501_set_power(sm, 1);
1463
1464         sm501_dump_regs(sm);
1465         sm501_dump_gate(sm);
1466         sm501_dump_clk(sm);
1467
1468         /* check to see if we are in the same state as when suspended */
1469
1470         if (readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
1471                 dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
1472                 writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
1473
1474                 /* our suspend causes the controller state to change,
1475                  * either by something attempting setup, power loss,
1476                  * or an external reset event on power change */
1477
1478                 if (sm->platdata && sm->platdata->init) {
1479                         sm501_init_regs(sm, sm->platdata->init);
1480                 }
1481         }
1482
1483         /* dump our state from resume */
1484
1485         sm501_dump_regs(sm);
1486         sm501_dump_clk(sm);
1487
1488         sm->in_suspend = 0;
1489
1490         return 0;
1491 }
1492 #else
1493 #define sm501_plat_suspend NULL
1494 #define sm501_plat_resume NULL
1495 #endif
1496
1497 /* Initialisation data for PCI devices */
1498
1499 static struct sm501_initdata sm501_pci_initdata = {
1500         .gpio_high      = {
1501                 .set    = 0x3F000000,           /* 24bit panel */
1502                 .mask   = 0x0,
1503         },
1504         .misc_timing    = {
1505                 .set    = 0x010100,             /* SDRAM timing */
1506                 .mask   = 0x1F1F00,
1507         },
1508         .misc_control   = {
1509                 .set    = SM501_MISC_PNL_24BIT,
1510                 .mask   = 0,
1511         },
1512
1513         .devices        = SM501_USE_ALL,
1514
1515         /* Errata AB-3 says that 72MHz is the fastest available
1516          * for 33MHZ PCI with proper bus-mastering operation */
1517
1518         .mclk           = 72 * MHZ,
1519         .m1xclk         = 144 * MHZ,
1520 };
1521
1522 static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
1523         .flags          = (SM501FB_FLAG_USE_INIT_MODE |
1524                            SM501FB_FLAG_USE_HWCURSOR |
1525                            SM501FB_FLAG_USE_HWACCEL |
1526                            SM501FB_FLAG_DISABLE_AT_EXIT),
1527 };
1528
1529 static struct sm501_platdata_fb sm501_fb_pdata = {
1530         .fb_route       = SM501_FB_OWN,
1531         .fb_crt         = &sm501_pdata_fbsub,
1532         .fb_pnl         = &sm501_pdata_fbsub,
1533 };
1534
1535 static struct sm501_platdata sm501_pci_platdata = {
1536         .init           = &sm501_pci_initdata,
1537         .fb             = &sm501_fb_pdata,
1538         .gpio_base      = -1,
1539 };
1540
1541 static int sm501_pci_probe(struct pci_dev *dev,
1542                            const struct pci_device_id *id)
1543 {
1544         struct sm501_devdata *sm;
1545         int err;
1546
1547         sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
1548         if (sm == NULL) {
1549                 dev_err(&dev->dev, "no memory for device data\n");
1550                 err = -ENOMEM;
1551                 goto err1;
1552         }
1553
1554         /* set a default set of platform data */
1555         dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
1556
1557         /* set a hopefully unique id for our child platform devices */
1558         sm->pdev_id = 32 + dev->devfn;
1559
1560         pci_set_drvdata(dev, sm);
1561
1562         err = pci_enable_device(dev);
1563         if (err) {
1564                 dev_err(&dev->dev, "cannot enable device\n");
1565                 goto err2;
1566         }
1567
1568         sm->dev = &dev->dev;
1569         sm->irq = dev->irq;
1570
1571 #ifdef __BIG_ENDIAN
1572         /* if the system is big-endian, we most probably have a
1573          * translation in the IO layer making the PCI bus little endian
1574          * so make the framebuffer swapped pixels */
1575
1576         sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
1577 #endif
1578
1579         /* check our resources */
1580
1581         if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
1582                 dev_err(&dev->dev, "region #0 is not memory?\n");
1583                 err = -EINVAL;
1584                 goto err3;
1585         }
1586
1587         if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
1588                 dev_err(&dev->dev, "region #1 is not memory?\n");
1589                 err = -EINVAL;
1590                 goto err3;
1591         }
1592
1593         /* make our resources ready for sharing */
1594
1595         sm->io_res = &dev->resource[1];
1596         sm->mem_res = &dev->resource[0];
1597
1598         sm->regs_claim = request_mem_region(sm->io_res->start,
1599                                             0x100, "sm501");
1600         if (sm->regs_claim == NULL) {
1601                 dev_err(&dev->dev, "cannot claim registers\n");
1602                 err= -EBUSY;
1603                 goto err3;
1604         }
1605
1606         sm->regs = ioremap(pci_resource_start(dev, 1),
1607                            pci_resource_len(dev, 1));
1608
1609         if (sm->regs == NULL) {
1610                 dev_err(&dev->dev, "cannot remap registers\n");
1611                 err = -EIO;
1612                 goto err4;
1613         }
1614
1615         sm501_init_dev(sm);
1616         return 0;
1617
1618  err4:
1619         release_resource(sm->regs_claim);
1620         kfree(sm->regs_claim);
1621  err3:
1622         pci_disable_device(dev);
1623  err2:
1624         pci_set_drvdata(dev, NULL);
1625         kfree(sm);
1626  err1:
1627         return err;
1628 }
1629
1630 static void sm501_remove_sub(struct sm501_devdata *sm,
1631                              struct sm501_device *smdev)
1632 {
1633         list_del(&smdev->list);
1634         platform_device_unregister(&smdev->pdev);
1635 }
1636
1637 static void sm501_dev_remove(struct sm501_devdata *sm)
1638 {
1639         struct sm501_device *smdev, *tmp;
1640
1641         list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
1642                 sm501_remove_sub(sm, smdev);
1643
1644         device_remove_file(sm->dev, &dev_attr_dbg_regs);
1645
1646         if (sm->gpio.registered)
1647                 sm501_gpio_remove(sm);
1648 }
1649
1650 static void sm501_pci_remove(struct pci_dev *dev)
1651 {
1652         struct sm501_devdata *sm = pci_get_drvdata(dev);
1653
1654         sm501_dev_remove(sm);
1655         iounmap(sm->regs);
1656
1657         release_resource(sm->regs_claim);
1658         kfree(sm->regs_claim);
1659
1660         pci_set_drvdata(dev, NULL);
1661         pci_disable_device(dev);
1662 }
1663
1664 static int sm501_plat_remove(struct platform_device *dev)
1665 {
1666         struct sm501_devdata *sm = platform_get_drvdata(dev);
1667
1668         sm501_dev_remove(sm);
1669         iounmap(sm->regs);
1670
1671         release_resource(sm->regs_claim);
1672         kfree(sm->regs_claim);
1673
1674         return 0;
1675 }
1676
1677 static struct pci_device_id sm501_pci_tbl[] = {
1678         { 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1679         { 0, },
1680 };
1681
1682 MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
1683
1684 static struct pci_driver sm501_pci_drv = {
1685         .name           = "sm501",
1686         .id_table       = sm501_pci_tbl,
1687         .probe          = sm501_pci_probe,
1688         .remove         = sm501_pci_remove,
1689 };
1690
1691 MODULE_ALIAS("platform:sm501");
1692
1693 static struct platform_driver sm501_plat_drv = {
1694         .driver         = {
1695                 .name   = "sm501",
1696                 .owner  = THIS_MODULE,
1697         },
1698         .probe          = sm501_plat_probe,
1699         .remove         = sm501_plat_remove,
1700         .suspend        = sm501_plat_suspend,
1701         .resume         = sm501_plat_resume,
1702 };
1703
1704 static int __init sm501_base_init(void)
1705 {
1706         platform_driver_register(&sm501_plat_drv);
1707         return pci_register_driver(&sm501_pci_drv);
1708 }
1709
1710 static void __exit sm501_base_exit(void)
1711 {
1712         platform_driver_unregister(&sm501_plat_drv);
1713         pci_unregister_driver(&sm501_pci_drv);
1714 }
1715
1716 module_init(sm501_base_init);
1717 module_exit(sm501_base_exit);
1718
1719 MODULE_DESCRIPTION("SM501 Core Driver");
1720 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
1721 MODULE_LICENSE("GPL v2");