git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-pxa/lpd270.c

   1 /*
   2  * linux/arch/arm/mach-pxa/lpd270.c
   3  *
   4  * Support for the LogicPD PXA270 Card Engine.
   5  * Derived from the mainstone code, which carries these notices:
   6  *
   7  * Author:      Nicolas Pitre
   8  * Created:     Nov 05, 2002
   9  * Copyright:   MontaVista Software Inc.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/sysdev.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/sched.h>
  21 #include <linux/bitops.h>
  22 #include <linux/fb.h>
  23 #include <linux/ioport.h>
  24 #include <linux/mtd/mtd.h>
  25 #include <linux/mtd/partitions.h>
  26
  27 #include <asm/types.h>
  28 #include <asm/setup.h>
  29 #include <asm/memory.h>
  30 #include <asm/mach-types.h>
  31 #include <asm/hardware.h>
  32 #include <asm/irq.h>
  33 #include <asm/sizes.h>
  34
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/map.h>
  37 #include <asm/mach/irq.h>
  38 #include <asm/mach/flash.h>
  39
  40 #include <asm/arch/pxa-regs.h>
  41 #include <asm/arch/lpd270.h>
  42 #include <asm/arch/audio.h>
  43 #include <asm/arch/pxafb.h>
  44 #include <asm/arch/mmc.h>
  45 #include <asm/arch/irda.h>
  46 #include <asm/arch/ohci.h>
  47
  48 #include "generic.h"
  49 #include "devices.h"
  50
  51
  52 static unsigned int lpd270_irq_enabled;
  53
  54 static void lpd270_mask_irq(unsigned int irq)
  55 {
  56         int lpd270_irq = irq - LPD270_IRQ(0);
  57
  58         __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
  59
  60         lpd270_irq_enabled &= ~(1 << lpd270_irq);
  61         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
  62 }
  63
  64 static void lpd270_unmask_irq(unsigned int irq)
  65 {
  66         int lpd270_irq = irq - LPD270_IRQ(0);
  67
  68         lpd270_irq_enabled |= 1 << lpd270_irq;
  69         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
  70 }
  71
  72 static struct irq_chip lpd270_irq_chip = {
  73         .name           = "CPLD",
  74         .ack            = lpd270_mask_irq,
  75         .mask           = lpd270_mask_irq,
  76         .unmask         = lpd270_unmask_irq,
  77 };
  78
  79 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
  80 {
  81         unsigned long pending;
  82
  83         pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
  84         do {
  85                 GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
  86                 if (likely(pending)) {
  87                         irq = LPD270_IRQ(0) + __ffs(pending);
  88                         desc = irq_desc + irq;
  89                         desc_handle_irq(irq, desc);
  90
  91                         pending = __raw_readw(LPD270_INT_STATUS) &
  92                                                 lpd270_irq_enabled;
  93                 }
  94         } while (pending);
  95 }
  96
  97 static void __init lpd270_init_irq(void)
  98 {
  99         int irq;
 100
 101         pxa27x_init_irq();
 102
 103         __raw_writew(0, LPD270_INT_MASK);
 104         __raw_writew(0, LPD270_INT_STATUS);
 105
 106         /* setup extra LogicPD PXA270 irqs */
 107         for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
 108                 set_irq_chip(irq, &lpd270_irq_chip);
 109                 set_irq_handler(irq, handle_level_irq);
 110                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 111         }
 112         set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
 113         set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 114 }
 115
 116
 117 #ifdef CONFIG_PM
 118 static int lpd270_irq_resume(struct sys_device *dev)
 119 {
 120         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
 121         return 0;
 122 }
 123
 124 static struct sysdev_class lpd270_irq_sysclass = {
 125         set_kset_name("cpld_irq"),
 126         .resume = lpd270_irq_resume,
 127 };
 128
 129 static struct sys_device lpd270_irq_device = {
 130         .cls = &lpd270_irq_sysclass,
 131 };
 132
 133 static int __init lpd270_irq_device_init(void)
 134 {
 135         int ret = sysdev_class_register(&lpd270_irq_sysclass);
 136         if (ret == 0)
 137                 ret = sysdev_register(&lpd270_irq_device);
 138         return ret;
 139 }
 140
 141 device_initcall(lpd270_irq_device_init);
 142 #endif
 143
 144
 145 static struct resource smc91x_resources[] = {
 146         [0] = {
 147                 .start  = LPD270_ETH_PHYS,
 148                 .end    = (LPD270_ETH_PHYS + 0xfffff),
 149                 .flags  = IORESOURCE_MEM,
 150         },
 151         [1] = {
 152                 .start  = LPD270_ETHERNET_IRQ,
 153                 .end    = LPD270_ETHERNET_IRQ,
 154                 .flags  = IORESOURCE_IRQ,
 155         },
 156 };
 157
 158 static struct platform_device smc91x_device = {
 159         .name           = "smc91x",
 160         .id             = 0,
 161         .num_resources  = ARRAY_SIZE(smc91x_resources),
 162         .resource       = smc91x_resources,
 163 };
 164
 165 static struct platform_device lpd270_audio_device = {
 166         .name           = "pxa2xx-ac97",
 167         .id             = -1,
 168 };
 169
 170 static struct resource lpd270_flash_resources[] = {
 171         [0] = {
 172                 .start  = PXA_CS0_PHYS,
 173                 .end    = PXA_CS0_PHYS + SZ_64M - 1,
 174                 .flags  = IORESOURCE_MEM,
 175         },
 176         [1] = {
 177                 .start  = PXA_CS1_PHYS,
 178                 .end    = PXA_CS1_PHYS + SZ_64M - 1,
 179                 .flags  = IORESOURCE_MEM,
 180         },
 181 };
 182
 183 static struct mtd_partition lpd270_flash0_partitions[] = {
 184         {
 185                 .name =         "Bootloader",
 186                 .size =         0x00040000,
 187                 .offset =       0,
 188                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
 189         }, {
 190                 .name =         "Kernel",
 191                 .size =         0x00400000,
 192                 .offset =       0x00040000,
 193         }, {
 194                 .name =         "Filesystem",
 195                 .size =         MTDPART_SIZ_FULL,
 196                 .offset =       0x00440000
 197         },
 198 };
 199
 200 static struct flash_platform_data lpd270_flash_data[2] = {
 201         {
 202                 .name           = "processor-flash",
 203                 .map_name       = "cfi_probe",
 204                 .parts          = lpd270_flash0_partitions,
 205                 .nr_parts       = ARRAY_SIZE(lpd270_flash0_partitions),
 206         }, {
 207                 .name           = "mainboard-flash",
 208                 .map_name       = "cfi_probe",
 209                 .parts          = NULL,
 210                 .nr_parts       = 0,
 211         }
 212 };
 213
 214 static struct platform_device lpd270_flash_device[2] = {
 215         {
 216                 .name           = "pxa2xx-flash",
 217                 .id             = 0,
 218                 .dev = {
 219                         .platform_data  = &lpd270_flash_data[0],
 220                 },
 221                 .resource       = &lpd270_flash_resources[0],
 222                 .num_resources  = 1,
 223         }, {
 224                 .name           = "pxa2xx-flash",
 225                 .id             = 1,
 226                 .dev = {
 227                         .platform_data  = &lpd270_flash_data[1],
 228                 },
 229                 .resource       = &lpd270_flash_resources[1],
 230                 .num_resources  = 1,
 231         },
 232 };
 233
 234 static void lpd270_backlight_power(int on)
 235 {
 236         if (on) {
 237                 pxa_gpio_mode(GPIO16_PWM0_MD);
 238                 pxa_set_cken(CKEN_PWM0, 1);
 239                 PWM_CTRL0 = 0;
 240                 PWM_PWDUTY0 = 0x3ff;
 241                 PWM_PERVAL0 = 0x3ff;
 242         } else {
 243                 PWM_CTRL0 = 0;
 244                 PWM_PWDUTY0 = 0x0;
 245                 PWM_PERVAL0 = 0x3FF;
 246                 pxa_set_cken(CKEN_PWM0, 0);
 247         }
 248 }
 249
 250 /* 5.7" TFT QVGA (LoLo display number 1) */
 251 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
 252         .pixclock               = 150000,
 253         .xres                   = 320,
 254         .yres                   = 240,
 255         .bpp                    = 16,
 256         .hsync_len              = 0x14,
 257         .left_margin            = 0x28,
 258         .right_margin           = 0x0a,
 259         .vsync_len              = 0x02,
 260         .upper_margin           = 0x08,
 261         .lower_margin           = 0x14,
 262         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 263 };
 264
 265 static struct pxafb_mach_info sharp_lq057q3dc02 = {
 266         .modes                  = &sharp_lq057q3dc02_mode,
 267         .num_modes              = 1,
 268         .lccr0                  = 0x07800080,
 269         .lccr3                  = 0x00400000,
 270         .pxafb_backlight_power  = lpd270_backlight_power,
 271 };
 272
 273 /* 12.1" TFT SVGA (LoLo display number 2) */
 274 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
 275         .pixclock               = 50000,
 276         .xres                   = 800,
 277         .yres                   = 600,
 278         .bpp                    = 16,
 279         .hsync_len              = 0x05,
 280         .left_margin            = 0x52,
 281         .right_margin           = 0x05,
 282         .vsync_len              = 0x04,
 283         .upper_margin           = 0x14,
 284         .lower_margin           = 0x0a,
 285         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 286 };
 287
 288 static struct pxafb_mach_info sharp_lq121s1dg31 = {
 289         .modes                  = &sharp_lq121s1dg31_mode,
 290         .num_modes              = 1,
 291         .lccr0                  = 0x07800080,
 292         .lccr3                  = 0x00400000,
 293         .pxafb_backlight_power  = lpd270_backlight_power,
 294 };
 295
 296 /* 3.6" TFT QVGA (LoLo display number 3) */
 297 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
 298         .pixclock               = 150000,
 299         .xres                   = 320,
 300         .yres                   = 240,
 301         .bpp                    = 16,
 302         .hsync_len              = 0x0e,
 303         .left_margin            = 0x04,
 304         .right_margin           = 0x0a,
 305         .vsync_len              = 0x03,
 306         .upper_margin           = 0x03,
 307         .lower_margin           = 0x03,
 308         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 309 };
 310
 311 static struct pxafb_mach_info sharp_lq036q1da01 = {
 312         .modes                  = &sharp_lq036q1da01_mode,
 313         .num_modes              = 1,
 314         .lccr0                  = 0x07800080,
 315         .lccr3                  = 0x00400000,
 316         .pxafb_backlight_power  = lpd270_backlight_power,
 317 };
 318
 319 /* 6.4" TFT VGA (LoLo display number 5) */
 320 static struct pxafb_mode_info sharp_lq64d343_mode = {
 321         .pixclock               = 25000,
 322         .xres                   = 640,
 323         .yres                   = 480,
 324         .bpp                    = 16,
 325         .hsync_len              = 0x31,
 326         .left_margin            = 0x89,
 327         .right_margin           = 0x19,
 328         .vsync_len              = 0x12,
 329         .upper_margin           = 0x22,
 330         .lower_margin           = 0x00,
 331         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 332 };
 333
 334 static struct pxafb_mach_info sharp_lq64d343 = {
 335         .modes                  = &sharp_lq64d343_mode,
 336         .num_modes              = 1,
 337         .lccr0                  = 0x07800080,
 338         .lccr3                  = 0x00400000,
 339         .pxafb_backlight_power  = lpd270_backlight_power,
 340 };
 341
 342 /* 10.4" TFT VGA (LoLo display number 7) */
 343 static struct pxafb_mode_info sharp_lq10d368_mode = {
 344         .pixclock               = 25000,
 345         .xres                   = 640,
 346         .yres                   = 480,
 347         .bpp                    = 16,
 348         .hsync_len              = 0x31,
 349         .left_margin            = 0x89,
 350         .right_margin           = 0x19,
 351         .vsync_len              = 0x12,
 352         .upper_margin           = 0x22,
 353         .lower_margin           = 0x00,
 354         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 355 };
 356
 357 static struct pxafb_mach_info sharp_lq10d368 = {
 358         .modes                  = &sharp_lq10d368_mode,
 359         .num_modes              = 1,
 360         .lccr0                  = 0x07800080,
 361         .lccr3                  = 0x00400000,
 362         .pxafb_backlight_power  = lpd270_backlight_power,
 363 };
 364
 365 /* 3.5" TFT QVGA (LoLo display number 8) */
 366 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
 367         .pixclock               = 150000,
 368         .xres                   = 240,
 369         .yres                   = 320,
 370         .bpp                    = 16,
 371         .hsync_len              = 0x0e,
 372         .left_margin            = 0x0a,
 373         .right_margin           = 0x0a,
 374         .vsync_len              = 0x03,
 375         .upper_margin           = 0x05,
 376         .lower_margin           = 0x14,
 377         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 378 };
 379
 380 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 381         .modes                  = &sharp_lq035q7db02_20_mode,
 382         .num_modes              = 1,
 383         .lccr0                  = 0x07800080,
 384         .lccr3                  = 0x00400000,
 385         .pxafb_backlight_power  = lpd270_backlight_power,
 386 };
 387
 388 static struct pxafb_mach_info *lpd270_lcd_to_use;
 389
 390 static int __init lpd270_set_lcd(char *str)
 391 {
 392         if (!strnicmp(str, "lq057q3dc02", 11)) {
 393                 lpd270_lcd_to_use = &sharp_lq057q3dc02;
 394         } else if (!strnicmp(str, "lq121s1dg31", 11)) {
 395                 lpd270_lcd_to_use = &sharp_lq121s1dg31;
 396         } else if (!strnicmp(str, "lq036q1da01", 11)) {
 397                 lpd270_lcd_to_use = &sharp_lq036q1da01;
 398         } else if (!strnicmp(str, "lq64d343", 8)) {
 399                 lpd270_lcd_to_use = &sharp_lq64d343;
 400         } else if (!strnicmp(str, "lq10d368", 8)) {
 401                 lpd270_lcd_to_use = &sharp_lq10d368;
 402         } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
 403                 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
 404         } else {
 405                 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
 406         }
 407
 408         return 1;
 409 }
 410
 411 __setup("lcd=", lpd270_set_lcd);
 412
 413 static struct platform_device *platform_devices[] __initdata = {
 414         &smc91x_device,
 415         &lpd270_audio_device,
 416         &lpd270_flash_device[0],
 417         &lpd270_flash_device[1],
 418 };
 419
 420 static int lpd270_ohci_init(struct device *dev)
 421 {
 422         /* setup Port1 GPIO pin. */
 423         pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);   /* USBHPWR1 */
 424         pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);  /* USBHPEN1 */
 425
 426         /* Set the Power Control Polarity Low and Power Sense
 427            Polarity Low to active low. */
 428         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
 429                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
 430
 431         return 0;
 432 }
 433
 434 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
 435         .port_mode      = PMM_PERPORT_MODE,
 436         .init           = lpd270_ohci_init,
 437 };
 438
 439 static void __init lpd270_init(void)
 440 {
 441         lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 442         lpd270_flash_data[1].width = 4;
 443
 444         /*
 445          * System bus arbiter setting:
 446          * - Core_Park
 447          * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
 448          */
 449         ARB_CNTRL = ARB_CORE_PARK | 0x234;
 450
 451         /*
 452          * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
 453          */
 454         pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
 455
 456         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 457
 458         if (lpd270_lcd_to_use != NULL)
 459                 set_pxa_fb_info(lpd270_lcd_to_use);
 460
 461         pxa_set_ohci_info(&lpd270_ohci_platform_data);
 462 }
 463
 464
 465 static struct map_desc lpd270_io_desc[] __initdata = {
 466         {
 467                 .virtual        = LPD270_CPLD_VIRT,
 468                 .pfn            = __phys_to_pfn(LPD270_CPLD_PHYS),
 469                 .length         = LPD270_CPLD_SIZE,
 470                 .type           = MT_DEVICE,
 471         },
 472 };
 473
 474 static void __init lpd270_map_io(void)
 475 {
 476         pxa_map_io();
 477         iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 478
 479         /* initialize sleep mode regs (wake-up sources, etc) */
 480         PGSR0 = 0x00008800;
 481         PGSR1 = 0x00000002;
 482         PGSR2 = 0x0001FC00;
 483         PGSR3 = 0x00001F81;
 484         PWER  = 0xC0000002;
 485         PRER  = 0x00000002;
 486         PFER  = 0x00000002;
 487
 488         /* for use I SRAM as framebuffer.  */
 489         PSLR |= 0x00000F04;
 490         PCFR  = 0x00000066;
 491 }
 492
 493 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 494         /* Maintainer: Peter Barada */
 495         .phys_io        = 0x40000000,
 496         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 497         .boot_params    = 0xa0000100,
 498         .map_io         = lpd270_map_io,
 499         .init_irq       = lpd270_init_irq,
 500         .timer          = &pxa_timer,
 501         .init_machine   = lpd270_init,
 502 MACHINE_END